4-PIN SOP 400 V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET

Solid State RelayOCMOS FET

PS7241-1A

DESCRIPTION

The PS7241-1A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and normally open (N.O.) contact MOS FETs on the output side.

It is suitable for analog signal control because of its low offset and high linearity.

FEATURES • Small and thin package (4-pin SOP, Height = 2.1 mm) • 1 channel type (1 a output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Low offset voltage • Ordering number of taping product: PS7241-1A-E3, E4, E5, F3, F4 • UL approved: File No. E72422 (S) • BSI approved: No. 8241/8242 • CSA approved: No. CA 101391 • VDE approved: No. 121302 ÜG

APPLICATIONS • Laptop PC, PDA • Modem card • Telephone, FAX • Measurement equipment

Document No. PN10301EJ01V1DS (1st edition) (Previous No. P13438EJ5V0DS00) Date Published February 2003 CP(K)

The mark shows major revised points.

DISCO

NTINUED

PS7241-1A

1. LED Anode2. LED Cathode3. MOS FET4. MOS FET

4 3

1 2

TOP VIEW

PACKAGE DIMENSIONSin millimeters

4.47.0±0.3

0.5±0.3

0.15

+0.

10–0

.05

2.54

4.0±0.50.

05+

0.08

–0.0

5

2.05

+0.

08–0

.05

0.40+0.10–0.05 0.25 M

Data Sheet PN10301EJ01V1DS 2

DISCO

NTINUED

PS7241-1A

ORDERING INFORMATION (Solder Contains Lead)

Part Number Package Packing Style Application Part Number*1

PS7241-1A 4-pin SOP Magazine case 100 pcs PS7241-1A

PS7241-1A-E3 Embossed Tape 900 pcs/reel

PS7241-1A-E4

PS7241-1A-E5 Embossed Tape 1 000 pcs/reel

PS7241-1A-F3 Embossed Tape 3 500 pcs/reel

PS7241-1A-F4

*1 For the application of the Safety Standard, following part number should be used.

ORDERING INFORMATION (Pb-Free)

Part Number Package Packing Style Application Part Number*1

PS7241-1A-A 4-pin SOP Magazine case 100 pcs PS7241-1A

PS7241-1A-E3-A Embossed Tape 900 pcs/reel

PS7241-1A-E4-A

PS7241-1A-E5-A Embossed Tape 1 000 pcs/reel

PS7241-1A-F3-A Embossed Tape 3 500 pcs/reel

PS7241-1A-F4-A

*1 For the application of the Safety Standard, following part number should be used.

ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)

Parameter Symbol Ratings Unit

Diode Forward Current (DC) IF 50 mA

Reverse Voltage VR 5.0 V

Power Dissipation PD 50 mW

Peak Forward Current *1 IFP 1 A

MOS FET Break Down Voltage VL 400 V

Continuous Load Current IL 120 mA

Pulse Load Current*2 (AC/DC Connection)

ILP 240 mA

Power Dissipation PD 300 mW

Isolation Voltage *3 BV 1 500 Vr.m.s.

Total Power Dissipation PT 350 mW

Operating Ambient Temperature TA −40 to +85 °C

Storage Temperature Tstg −40 to +100 °C

*1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet PN10301EJ01V1DS 3

DISCO

NTINUED

PS7241-1A

RECOMMENDED OPERATING CONDITIONS (TA = 25 °C)

Parameter Symbol MIN. TYP. MAX. Unit

LED Operating Current IF 2 10 20 mA

LED Off Voltage VF 0 0.5 V

ELECTRICAL CHARACTERISTICS (TA = 25 °C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V

Reverse Current IR VR = 5 V 5.0 µA

MOS FET Off-state Leakage Current

ILoff VD = 400 V 0.03 1.0 µA

Output Capacitance Cout VD = 0 V, f = 1 MHz 54 pF

Coupled LED On-state Current IFon IL = 120 mA 2.0 mA

On-state Resistance Ron1 IF = 10 mA, IL = 10 mA 18 30 Ω

Ron2 IF = 10 mA, IL = 120 mA, t ≤ 10 ms 15 25

Turn-on Time*1 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.5 2.0 ms

Turn-off Time*1 toff PW ≥ 10 ms 0.07 0.2

Isolation Resistance RI-O VI-O = 1.0 kVDC 109 Ω

Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.5 pF

*1 Test Circuit for Switching Time

VL

RL

IF

Rin

Pulse Input

Input monitor monitorVO

ton toff

10 %

90 %

0

VO = 5 V

50 %

Output

Input

Data Sheet PN10301EJ01V1DS 4

DISCO

NTINUED

PS7241-1A

TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)

100857550250–25

20

60

80

100

40

0

Max

imum

For

war

d C

urre

nt I

F (

mA

)

Ambient Temperature TA (˚C)

MAXIMUM FORWARD CURRENT vs.AMBIENT TEMPERATURE

f = 1 MHz

20 40 60 80 100 120

200

0

150

100

50

OUTPUT CAPACITANCE vs.O

utpu

t Cap

acita

nce

Cou

t (pF

)

Applied Voltage VD (V)

LOAD CURRENT vs. LOAD VOLTAGE

Load

Cur

rent

IL

(mA

)

Load Voltage VL (V)

IF = 10 mA

–4.0 –2.0 0 4.02.0

–100

–200

100

200

10085750–25 5025

200

300

100

0

Max

imum

Loa

d C

urre

nt I

L (m

A)

Ambient Temperature TA (˚C)

MAXIMUM LOAD CURRENT vs.AMBIENT TEMPERATURE

Off-

stat

e Le

akag

e C

urre

nt I

Loff

(A)

Applied Voltage VD (V)

OFF-STATE LEAKAGE CURRENT vs.APPLIED VOLTAGE

APPLIED VOLTAGE

IF = 50 mA30 mA20 mA10 mA5 mA1 mA

1000–25 25 50 75

1.0

1.4

1.6

1.8

1.2

0.8

For

war

d V

olta

ge V

F (

V)

Ambient Temperature TA (˚C)

AMBIENT TEMPERATUREFORWARD VOLTAGE vs.

5001000 200 300 400

10–7

10–6

10–5

10–8

10–9

25 ˚C

TA = 85 ˚C

Data Sheet PN10301EJ01V1DS 5

DISCO

NTINUED

PS7241-1A

Normalized to 1.0 at TA = 25 ˚C,IF = 10 mA, IL = 10 mA

0.5

1.5

2.0

3.0

1.0

2.5

0.0100755025–25 0

Nor

mal

ized

On-

stat

e R

esis

tanc

e R

on

Ambient Temperature TA (˚C)

NORMALIZED ON-STATE RESISTANCE vs.AMBIENT TEMPERATURE

n = 50 pcs,IF = 10 mA,IL = 10 mA

18 2216 20 240

5

10

15

20

25

30

ON-STATE RESISTANCE DISTRIBUTION

Num

ber

(pc

s)

On-state Resistance Ron (Ω)

n = 50 pcs,IF = 10 mA,VO = 5 V

n = 50 pcs,IF = 10 mA,VO = 5 V

0.06 0.080.04 0.10 0.120

5

10

15

20

25

30

Num

ber

(pc

s)

Turn-off Time toff (ms)

TURN-OFF TIME DISTRIBUTION

0.5 0.60.4 0.7 0.80

5

10

15

20

25

30

Num

ber

(pc

s)

Turn-on Time ton (ms)

TURN-ON TIME DISTRIBUTION

30252015105

0.5

1.5

2.0

3.0

1.0

2.5

0

Tur

n-on

Tim

e to

n (m

s)

Forward Current IF (mA)

TURN-ON TIME vs. FORWARD CURRENT

VO = 5 VVO = 5 V

30252015105

0.05

0.15

0.20

0.30

0.10

0.25

0

Tur

n-of

f Tim

e to

ff (m

s)

Forward Current IF (mA)

TURN-OFF TIME vs. FORWARD CURRENT

Data Sheet PN10301EJ01V1DS 6

DISCO

NTINUED

PS7241-1A

Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V

Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V

1000–25 25 50 75

2.5

3.0

0.0

2.0

1.5

1.0

0.5Nor

mal

ized

Tur

n-on

Tim

e to

n

Ambient Temperature TA (˚C)

NORMALIZED TURN-ON TIME vs.AMBIENT TEMPERATURE

1000–25 25 50 75

2.5

3.0

0.0

2.0

1.5

1.0

0.5Nor

mal

ized

Tur

n-of

f Tim

e to

ff

Ambient Temperature TA (˚C)

NORMALIZED TURN-OFF TIME vs.AMBIENT TEMPERATURE

Remark The graphs indicate nominal characteristics.

Data Sheet PN10301EJ01V1DS 7

DISCO

NTINUED

PS7241-1A

TAPING SPECIFICATIONS (in millimeters)

PS7241-1A-E3 PS7241-1A-E4

Tape Direction

Outline and Dimensions (Tape)

1.55±0.1

2.0±0.054.0±0.1 1.

75±

0.1

4.6±0.1

2.9 MAX.

0.38.0±0.1

2.4±0.1

1.5+0.1–0

7.4±

0.1

5.5±

0.05

12.0

±0.

2

Outline and Dimensions (Reel)

Packing: 900 pcs/reel

2.0±0.5

R 1.0

13.0±0.2φ

21.0±0.8φ

2.0±0.5

11.9 to 15.4Outer edge of flange

17.5±1.0

13.5±1.0

180+

0

φ–1

.5

+1 –0

60φ

Data Sheet PN10301EJ01V1DS 8

DISCO

NTINUED

PS7241-1A

1.6±0.1

2.0±0.14.0±0.1 1.55±0.05 1.

75±

0.1

5.5±

0.1

12.0

±0.

3

7.4±0.1

2.4±0.3

4.4±

0.1

0.3±0.05

12.0±0.3

PS7241-1A-E5

255±

2.0

80±

1.0

13.5±1.0

2.0

13.0

±0.

5

60

4

2.0±0.5

2.5

Outline and Dimensions (Tape)

Tape Direction

Outline and Dimensions (Reel)

Packing: 1 000 pcs/reel

Data Sheet PN10301EJ01V1DS 9

DISCO

NTINUED

PS7241-1A

PS7241-1A-F3 PS7241-1A-F4

Tape Direction

Outline and Dimensions (Tape)

1.55±0.1

2.0±0.054.0±0.1 1.

75±

0.1

4.6±0.1

2.9 MAX.

0.38.0±0.1

2.4±0.1

1.5+0.1–0

7.4±

0.1

5.5±

0.05

12.0

±0.

2

Outline and Dimensions (Reel)

Packing: 3 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2φ

21.0±0.8φ

330±

2.0

φ 100±

1.0

φ

2.0±0.5

11.9 to 15.4Outer edge of flange

17.5±1.0

13.5±1.0

13.0

±0.

2φ

Data Sheet PN10301EJ01V1DS 10

DISCO

NTINUED

PS7241-1A

RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

220˚C

Pac

kage

Sur

face

Tem

pera

ture

T (

˚C)

Time (s)

(heating)to 10 s

to 60 s

260˚C MAX.

Recommended Temperature Profile of Infrared Reflow

120±30 s(preheating)

180˚C

120˚C

(2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Data Sheet PN10301EJ01V1DS 11

DISCO

NTINUED

Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailedwith the requirements of European Union (EU) Directive 2002/95/EC RestrictioSubstances in electrical and electronic equipment (RoHS) and the requiremen2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. Ththat the device is Pb-free. The –AZ suffix is used to designate devices containiexempted from the requirement of RoHS directive (*). In all cases the devices All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledgo into its products as of the date of disclosure of this information.

Restricted Substance per RoHS

Concentration Limit per RoHS (values are not yet fixed)

Concein

-A Lead (Pb) < 1000 PPM Not Detect

Mercury < 1000 PPM N

Cadmium < 100 PPM N

Hexavalent Chromium < 1000 PPM N

PBB < 1000 PPM N

PBDE < 1000 PPM N

If you should have any additional questions regarding our devices and compliastandards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communicationcontent of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowprovided by third parties and makes no representation or warranty as to the accuracy of such information. Eintegrate information from third parties. CEL has taken and continues to take reasonable steps to provide reinformation but may not have conducted destructive testing or chemical analysis on incoming materials and suppliers consider certain information to be proprietary, and thus CAS numbers and other limited informationrelease. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL pacustomer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. DIS

CONTI

NU

4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279

below are compliant n on Use of Hazardous ts of EU Directive

e suffix –A indicates ng Pb which are have Pb-free terminals.

ge of the materials that

ntration contained CEL devices

-AZ ed (*)

ot Detected

ot Detected

ot Detected

ot Detected

ot Detected

nce to environmental

s concerting the substance ledge and belief on information fforts are underway to better presentative and accurate chemicals. CEL and CEL may not be available for

rt(s) at issue sold by CEL to

ED