Upload
subhi-mohamad
View
147
Download
16
Embed Size (px)
DESCRIPTION
auxaliary views
Citation preview
Regular Views and Auxiliary Views.
Figure 8-1
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
An Auxiliary View.
Figure 8-2
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Drawing an Auxiliary View—Folding-Line Method.
Figure 8-3
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Drawing Parallel or Perpendicular Lines.
Figure 8-4
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Position of the Reference Plane.
Figure 8-5
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Drawing an Auxiliary View—Reference-Plane Method.
Figure 8-6
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Depth Auxiliary Views.
Figure 8-7
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Height Auxiliary Views.
Figure 8-8
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Width Auxiliary Views.
Figure 8-9
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Revolving a Drawing.
Figure 8-10
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Dihedral Angles.
Figure 8-11
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Plotted Curves.
Figure 8-12
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Reverse Construction.
Figure 8-13
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Primary Auxiliary Views.
Figure 8-14
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Partial Views.
Figure 8-15
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Half Views.
Figure 8-16
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Auxiliary Sections.
Figure 8-17
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Auxiliary Section.
Figure 8-18
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Auxiliary Section.
Figure 8-19
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
True Length of a Line by Means of an Auxiliary View.
Figure 8-20
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Successive Auxiliary Views.
Figure 8-21
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
True Size of Oblique Surface—Folding-Line Method.Figure 8-22
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
True Size of Oblique Surface—Reference-Plane Method.
Figure 8-23
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Secondary Auxiliary View with Oblique Direction of Sight Given.
Figure 8-24
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Secondary Auxiliary View—Partial Views.
Figure 8-25
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Ellipses.
Figure 8-26
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
RH Finger. Given: Front and auxiliary views. Required: Completefront, auxiliary, left-side, and top views (Layout A–3 or A4–3 adjusted).
Figure 8-27
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
V-Block. Given: Front and auxiliary views. Required: Complete front,top, and auxiliary views (Layout A–3 or A4–3 adjusted).
Figure 8-28
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
1 2 3 4 5 6
7 8 9 10 11
12
13 1415 16
1817
19 20 21 22 23 24
25 26 2728 29
30
Auxiliary View Problems. Make freehand sketch or instrument drawing of selected problem as assigned.Draw given front and right-side views, and add incomplete auxiliary view, including all hidden lines(Layout A–3 or A4–3 adjusted). If assigned, design yourown right-side view consistent with given frontview, and then add complete auxiliary view.
Figure 8-29
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Figure 8-30
Anchor Bracket. Draw necessary views or partialviews (Layout A–3 or A4–3 adjusted).*
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Centering Block. Draw complete front, top, and right-side views,plus indicated auxiliary views (Layout B–3 or A3–3).*
Figure 8-31
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Clamp Slide. Draw necessary views completely(Layout B–3 or A3–3).*
Figure 8-32
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Guide Block. Given: Right-side and auxiliary views. Required: Right-side,auxiliary, plus front and top views—all complete (Layout B–3 or A3–3).*
Figure 8-33
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Angle Bearing. Draw necessary views, including acomplete auxiliary view (Layout A–3 or A4–3 adjusted).*
Figure 8-34
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Guide Bracket. Draw necessary views or partialviews (Layout B–3 or A3–3).*
Figure 8-35
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Rod Guide. Draw necessary views, including complete auxiliary viewshowing true shape of upper rounded portion (Layout B–4 or A3–4 adjusted).*
Figure 8-36
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Figure 8-37
Brace Anchor. Draw necessary views, including partial auxiliary viewshowing true shape of cylindrical portion (Layout B–4 or A3–4 adjusted).*
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
45º Elbow. Draw necessary views, including a broken section and twohalf views of flanges (Layout B–4 or A3–4 adjusted).*
Figure 8-38
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Angle Guide. Draw necessary views, including a partial auxiliary viewof cylindrical recess (Layout B–4 or A3–4 adjusted).*
Figure 8-39
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Holder Block. Draw front and right-side views (2.80” apart) andcomplete auxiliary view of entire object showing true shape ofsurface A and all hidden lines (Layout A–3 or A4–3 adjusted).*
Figure 8-40
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Control Bracket. Draw necessary views, including partial auxiliaryviews and regular views (Layout C–4 or A2–4).*
Figure 8-41
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Tool Holder Slide. Draw given views, and add complete auxiliary viewshowing true curvature of slot on bottom (Layout B–4 or A3–4 adjusted).*
Figure 8.42
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Adjuster Block. Draw necessary views, including complete auxiliary viewshowing true shape of inclined surface (Layout B–4 or A3–4 adjusted).*
Figure 8-43
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Guide Bearing. Draw necessary views and partial views, including twopartial auxiliary views (Layout C–4 or A2–4).*
Figure 8-44
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Drill Press Bracket. Draw given views and add complete auxiliary viewshowing true shape of inclined face (Layout B–4 or A3–4 adjusted).*
Figure 8-45
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Brake Control Lever. Draw necessary views andpartial views (Layout B–4 or A3–4 adjusted).*
Figure 8-46
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Shifter Fork. Draw necessary views, including partial auxiliary view showing true shapeof inclined arm (Layout B–4 or A3–4 adjusted).*
Figure 8-47
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Cam Bracket. Draw necessary views or partialviews as needed. (Layout B–4 or A3–4 adjusted).*
Figure 8-48
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
RH Tool Holder. Draw necessary views, including partial auxiliary views showing105º angle and square hole true size. (Layout B–4 or A3–4 adjusted).*
Figure 8-49
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Draw secondary auxiliary views, complete, which (except Prob. 2) will show the truesizes of the inclined surfaces. In Prob. 2 draw secondary auxiliary view as seen in directionof arrow (Layout B–3 or A3–3).*
Figure 8-50
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Control Bracket. Draw necessary views including primary and secondaryauxiliary views so that the latter shows true shape of oblique surfaceA (Layout B–4 or A3–4 adjusted).*
Figure 8-51
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Holder Block. Draw given views and primary and secondary auxiliary views so that thelatter shows true shape of oblique surface (Layout B–4 or A3–4 adjusted).*
Figure 8-52
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Dovetail Slide. Draw complete given views and auxiliary views, including view showingtrue size of surface 1–2–3–4 (Layout B–4 or A3–4 adjusted).*
Figure 8-53
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Dovetail Guide. Draw given views plus completeauxiliary views as indicated (Layout B–4 or A3–4 adjusted).*
Figure 8-54
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Adjustable Stop. Draw complete front and auxiliary views plus partial right-side view.Show all hidden lines (Layout C–4 or A2–4).*
Figure 8-55
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Tool Holder. Draw complete front view, and primary and secondary auxiliary viewsas indicated (Layout B–4 or A3–4 adjusted).*
Figure 8-56
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Box Tool Holder for Turret Lathe. Given: Front and right-side views. Required: Front and left-sideviews, and complete auxiliary view as indicated by arrow (Layout C–4 or A2–4).*
Figure 8-57
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
Pointing Tool Holder for Automatic Screw Machine. Given: Front and right-side views. Required:Front view and three partial auxiliary views (Layout C–4 or A2–4).*
Figure 8-58
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
R 1.25R 1.00
2xR.875 2xØ.875
Ø 1.25
4.00
2.75
5.50
Print Roller. Given: Right-side view. Design your own front and auxiliary view(Use Layout A–3 or A4–3 adjusted). If assigned, use CAD to create a partial auxiliary view.
Figure 8-59
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
FRON
T VIEW
45°
.38
R.75TYP.
2.5
1.0
2X:.6
8TH
RU
Clamp. Draw all required views. Include at least oneauxiliary view (Layout A-3 or A4-3 adjusted).*
Figure 8-60
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
RIO - 2 PLACES
R5 TYP
10
10
:60
:40
50
20 40
75
Plastic Spacer. Draw all necessary views. Make at leastone auxiliary view (Layout A-3 or A4-3 adjusted).*
Figure 8-61
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
METRIC
44 15
54
:30,THRU:44
88
RIO(TYP.)
RIO
(22)
42
Plastic Spacer. Draw all necessary views. Include at least one auxiliary view (Layout A-3or A4-3 adjusted).* 8.63 Plastic Slide. Draw all required views. Include at least one
Figure 8-62
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
FRON
TVIE
W
2.0
3.5
60°
1.751.25
.50
.50
Plastic Slide. Draw all required views. Include at least oneauxiliary view (Layout A-3 or A4-3 adjusted).*
Figure 8-63
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e
R.62
1.25.62
(2.43)
R.28
R.56
.06
.12
:.62THRU
1.12
.50
0.6
FRON
TVIE
W
1.501.0
R.21R.50
.501.0
32
Mounting Clip. Draw all required views. Include at least oneauxiliary view (Layout A-3 or A4-3 adjusted).*
Figure 8-64
© 2003, Prentice-Hall, Inc.GieseckeTechnical Drawing, 12e