CHANNEL TRAY - MonoSystems€¦ · compare our channel tray line with a popular brand. By specifying MonoSystems channel tray parts you can be confident that all of our parts are

CHANNEL TRAY

C A B L E T R AY | S U R F A C E R A C E W AY | J - H O O K S | I N - F L O O R S Y S T E M S | P O W E R P O L E S | D E S K P E D E S TA L S

To calculate simple Beam Deflection in inches, multiply the design load (lbs/ft) by the Deflection Multiplier shown for the span.To calculate simple Beam Deflection in millimeters, multiply the design load (kg/m) by the Deflection Multiplier shown for the span.All dimensions in parentheses are millimeters unless otherwise specified.* Load data is determined by realistic deflection, not by failure.

© 2013 MonoSystems, Inc. © Cooper. All rights reserved.

Channel Tray from MonoSystemsFor 45-years MonoSystems has been creating innovative wire management solutions. We stand alone as the only manufacturer of cable tray, raceway, poke-throughs, power poles, j-hooks, in-floor systems (and more) that sells direct. On the following pages you will find information that makes it easy for you to compare our channel tray line with a popular brand. By specifying MonoSystems channel tray parts you can be confident that all of our parts are interchangeable. Furthermore, because our products are sold direct, you will be able to bring greater value to your channel tray projects and customers.

As always, MonoSystems offers free assistance with budgetary pricing and take-offs. If you have any questions regarding project timing or require additional information, please call 888.764.7681 or visit us online at MonoSystems.com.

Vented

Ventilated straight sections contain 21/4” diameter holes and 3/16” x 7/8” slots for cable attachment. Ventilated straight sections also have splice holes repeating every 12” to simplify field modifications.

Non-vented

TRAY HEIGHT

125 = 1.25”* 175 = 1.75”**

TRAY WIDTH 3 = 3”4 = 4”6 = 6”

TRAYLENGTH 120 = 10’144 = 12’

Straight Section Part Numbering

S V X - 125 - 03 - LExample:

MATERIAL A = AluminumG = Type 1 - HDGAFP = Pre-Galvanized SteelSS4 = 304 Stainless SteelSS6 = 316 Stainless Steel

PATTERN V =Vented B = Non-Ventilated

Materia Width Depth UL Area Load Data * Support Span (Ft) Load Data * Support Span (m)Type in. in. in.2

Safety Factor = 1.5 5 6 10 12 Safety Factor = 1.5 1.5 1.8 3.0 3.7

3 1.25 0.6 Load (lbs/ft) 22 15 5 4 Load (kg/m) 33 22 7 6

(75) (32) Deflection Multiplier 0.02 0.051 0.395 0.820 Deflection Multiplier .427 0.871 6.743 13.997

Aluminum 4 1.75 0.6 Load (lbs/ft) 48 33 12 8 Load (kg/m) 71 49 18 12

(100) (44) Deflection Multiplier 0.0071 0.015 0.114 0.236 Deflection Multiplier 0.121 0.256 1.946 4.028





Steel 4 1.75 0.40 Load (lbs/ft) 52 36 13 9 Load (kg/m) 77 54 19 13

(100) (44)14 Gauge

Deflection Multiplier 0.0039 0.0082 0.063 0.130 Deflection Multiplier 0.067 0.140 1.075 2.219



3. Channel Tray

3” (76mm) CHANNEL WIDTH 4” (101mm) CHANNEL WIDTH 6” (101mm) CHANNEL WIDTHMATERIAL

ft. m

Aluminum (.040)Solid

Aluminum (.040)Vented

Pre-Galvanized SteelSolid

Pre-Galvanized SteelVented

Type I HDGAF Solid

Type I HDGAF Vented

304 Stainless SteelSolid

304 Stainless SteelVented

316 Stainless Steel Solid

316 Stainless Steel Vented

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

12 3.6

10 3.0

LENGTH

SBA125-03-144

SBA125-03-120

SVA125-03-144

SVA125-03-120

SBP125-03-144

SBP125-03-120

SVP125-03-144

SVP125-03-120

SBG125-03-144

SBG125-03-120

SVG125-03-144

SVG125-03-120

SBSS4125-03-144

SBSS4125-03-120

SVSS4125-03-144

SVSS4125-03-120

SBSS6125-03-144

SBSS6125-03-120

SVSS6125-03-144

SVSS6125-03-120

SBA175-04-144

SBA175-04-120

SVA175-04-144

SVA175-04-120

SBP175-04-144

SBP175-04-120

SVP175-04-144

SVP175-04-120

SBG175-04-144

SBG175-04-120

SVG175-04-144

SVG175-04-120

SBSS4175-04-144

SBSS4175-04-120

SVSS4175-04-144

SVSS4175-04-120

SBSS6175-04-144

SBSS6175-04-120

SVSS6175-04-144

SVSS6175-04-120

SBA175-06-144

SBA175-06-120

SVA175-06-144

SVA175-06-120

SBP175-06-144

SBP175-06-120

SVP175-06-144

SVP175-06-120

SBG175-06-144

SBG175-06-120

SVG175-06-144

SVG175-06-120

SBSS4175-06-144

SBSS4175-06-120

SVSS4175-06-144

SVSS4175-06-120

SBSS6175-06-144

SBSS6175-06-120

SVSS6175-06-144

SVSS6175-06-120

ACCN-03-144

ACCN-03-120

ACC-03-144

ACC-03-120

ZNCCN-03-144

ZNCCN-03-120

ZNCC-03-144

ZNCC-03-120

GCCN-03-144

GCCN-03-120

GCC-03-144

GCC-03-120

SS4CCN-03-144

SS4CCN-03-120

SS4CC-03-144

SS4CC-03-120

SS6CCN-03-144

SS6CCN-03-120

SS6CC-03-144

SS6CC-03-120

ACCN-04-144

ACCN-04-120

ACC-04-144

ACC-04-120

ZNCCN-04-144

ZNCCN-04-120

ZNCC-04-144

ZNCC-04-120

GCCN-04-

144GCCN-04-120

GCC-04-144

GCC-04-120

SS4CCN-04-144

SS4CCN-04-120

SS4CC-04-144

SS4CC-04-120

SS6CCN-04-144

SS6CCN-04-120

SS6CC-04-144

SS6CC-04-120

ACCN-06-144

ACCN-06-120

ACC-06-144

ACC-06-120

ZNCCN-06-144

ZNCCN-06-120

ZNCC-06-144

ZNCC-06-120

GCCN-06-144

GCCN-06-120

GCC-06-144

GCC-06-120

SS4CCN-06-144

SS4CCN-06-120

SS4CC-06-144

SS4CC-06-120

SS6CCN-06-144

SS6CCN-06-120

SS6CC-06-144

SS6CC-06-120

2. Channel Tray

* Available for 3 inch channel only** Available for 4 & 6 inch channel only

Compare part to:COOPER B-LINE



Requires supports within 24” on both sides, per NEMA VE 2.

Requires supports within 24” on both sides, per NEMA VE 2.

SB(*)-1043

SB(*)-1044

SB(*)-1046

9(*)-1043

9(*)-1044

9(*)-1046

in. mm

3 76

4 101

6 152

CATALOG # CHANNEL WIDTH

The Splice Plate has the standard 4-hole pattern for all cable channel.

• Provided with straight sections and fittings.

• Furnished as one plate with hardware.

• (*) Insert: A, G, P, SS4, SS6

SB(*)-1743

SB(*)-1744

SB(*)-1746

9(*)-1743

9(*)-1744

9(*)-1746

in. mm

3 76

4 101

6 152


The Horizontal Adjustable Splice Plate adapts to changes in direction in a horizontal plane, beyond the capability of the standard horizontal fittings.



SB(*)-1543

SB(*)-1544

SB(*)-1546

9(*)-1543

9(*)-1544

9(*)-1546

SB(*)-1543

SB(*)-1544

SB(*)-1546

9(*)-1543

9(*)-1544

9(*)-1546

in. mm

3 76

4 101

6 152


The Box Connector is used to attach the end of a cable channel run to a distribution box or a control center.

• Furnished as one connector with hardware.


SB(*)-1843

SB(*)-1863

SB(*)-1864

9(*)-1843

9(*)-1863

9(*)-1864

in. mm

4 to 3 101 to 76

6 to 3 152 to 76

6 to 4 152 to 101


The Channel Reducer Plate is used to join cable channel sections of different widths.



SB(*)-1583

SB(*)-1584

SB(*)-1586

9(*)-1583

9(*)-1584

9(*)-1586

in. mm

3 76

4 101

6 152


The Blind End Plate forms a closure for any cable channel dead end.



SB(*)-1643

SB(*)-1643

SB(*)-1643

9(*)-1643

9(*)-1644

9(*)-1646

in. mm

3 76

4 101

6 152


The Adjustable Splice Plate allows changes in elevation where standardvertical fittings are not applicable.



SB(*)-1261-3

SB(*)-1261-4

SB(*)-1261-6

9(*)-1261-3

9(*)-1261-4

9(*)-1261-6

in. mm

3 76

4 101

6 152


The Channel Connector is used to link a cable channel to a cable tray, or a cable channel to cable channel.



SB(*)-1237-3

SB(*)-1237-4

SB(*)-1237-6

9(*)-1237-3

9(*)-1237-4

9(*)-1237-6

in. mm

3 76

4 101

6 152


The Mounting Bracket allows a parallel run of cable channel to be attached to the side of a cable tray. It can also serve as a support splice connection.

• Furnished as one bracket.

• Order hardware separately.


CHANNELTO TRAY

CHANNEL TO CHANNEL

CHANNELTO TRAY

CHANNEL TO CHANNEL

CHANNELTO TRAY

CHANNEL TO CHANNEL

CHANNELTO TRAY

CHANNEL TO CHANNEL

CHANNELTO TRAY

CHANNEL TO CHANNEL

SB(*)-1243

SB(*)-1244

SB(*)-1244

9(*)-1243

9(*)-1244

9(*)-1244

in. mm

3 76

4 101

6 152


The Expansion Guide Clamp allows cable channel to expand andcontract in the horizontal plane, but not in the transverse plane.

• Furnished as one clamp.• Order 1/2” hardware

separately.• (*) Insert:

A, P, G, SS4, SS6

SB(*)-3305-3

SB(*)-3305-4

SB(*)-3305-6

9(*)-3305-3

9(*)-3305-4

9(*)-3305-6

in. mm

3 76

4 101

6 152


The Channel to Floor Base Plate is used to attach the end of a cable channel run to the floor or to an equipment mounting pad.

• Anchors and hardware are ordered separately.

• (*) Insert: A, P, G, SS4, SS6

SB(*)-B185CCL

SB(*)-B185CCL

SB(*)-B185CCL

9(*)-B185CCL

9(*)-B185CCL

9(*)-B185CCL

in. mm

3 76

4 101

6 152


• Uniform Load: 225 lbs (1.00 kN) Safety Factor of 2.5

• Finishes available: • (*) Insert:

G, P

SB(*)-1245

SB(*)-1246

SB(*)-1246

9(*)-1245

9(*)-1246

9(*)-1246

in. mm

3 76

4 101

6 152


The Hold-Down Clamp secures cablechannel to a support member.

• Furnished as one clamp.

• Order 1/2” hardware separately.

• (*) Insert: A, P, G, SS4, SS6

CATALOG #

The Cable Channel Bushing is a snap-inplastic bushing used to protect cable insulation from mechanical wear.

SB(*)-409-6

SB(*)-409-9

9(*)-409-6

9(*)-409-9

in. mm lbs kN in. mm

3 76

4 101

1920 8.54

1280 5.69

6 152

9 228

CATALOG # CHANNEL WIDTH UNIFORM LOAD A

A

Safety Factor of 2.5

• (*) Insert: G, P, Painted Green Steel

Single Cable ChannelHanger and Wall Mount150 lb. Safety Factor 3.0

Double CableChannel Hanger265 lb. Safety Factor 3.0

Zinc Plated Steel

Double Channel

Single Channel

Double Channel

Single Channel

Double Channel

Single Channel

9P-1232-3

9P-1231-3

9ZN-1232-3

9ZN-1231-3

9P-1242-4

9P-1241-4

9ZN-1242-4

9ZN-1241-4

9P-1262-6

9P-1261-6

9ZN-1262-6

9ZN-1241-6

CATALOG #MATERIAL

in. mm

3 76

3 76

4 101

4 101

6 152

6 152

CHANNEL WIDTH

HDGAF Steel (18 Ga.)

9G-1232-3

9G-1231-3

9G-1232-3

9G-1231-3

9G-1242-4

9G-1241-4

9G-1242-4

9G-1241-4

9G-1262-6

9G-1261-6

9G-1262-6

9G-1261-6

CATALOG #

in. mm

3 76

3 76

4 101

4 101

6 152

6 152

CHANNEL WIDTHMATERIAL

Double Channel

Single Channel

Double Channel

Single Channel

Double Channel

Single Channel

8” (203mm)

4. Channel Tray

SVX-1125

99-125

SPLICE PLATE

HORIZONTAL ADJUSTABLE SPLICE PLATE

BOX CONNECTOR

BLIND END PLATE

VERTICAL ADJUSTABLE SPLICE PLATE

CHANNEL TO TRAY or CHANNEL TO CHANNEL

MOUNTING BRACKET - CHANNEL TO TRAYCHANNEL REDUCER PLATE

EXPANSION GUIDE CLAMP HOLD DOWN CLAMP

CHANNEL TO FLOOR BASE PLATE CABLE CHANNEL BUSHING

CABLE CHANNEL BRACKETCABLE CHANNEL BRACKET

CABLE CHANNEL HANGER - DESIGNED FOR 1/2” THREADED ROD, DOUBLE NUT INSTALLATION

5. Channel Tray

















3” (76mm) CHANNEL WIDTH 4” (101mm) CHANNEL WIDTH 6” (101mm) CHANNEL WIDTHMATERIAL

in. mm

Aluminum (.040)

Type II Pre-Galvanized Steel (20 Ga.) Solid

Type I Hot Dip Galvanized Steel (20 Ga.) Solid

12 3.56

10 3.05

6 3.56

5 3.05

12 3.56

10 3.05

6 3.56

5 3.05

12 3.56

10 3.05

6 3.56

5 3.05

LENGTH

SBA-COV-03-144

SBA-COV-03-120

SBA-COV-03-72

SBA-COV-03-60

SBP-COV-03-144

SBP-COV-03-120

SBP-COV-03-7 2

SBP-COV-03-60

SBG-COV-03-144

SBG-COV-03-120

SBG-COV-03-72

SBG-COV-03-60

SBA-COV-04-144

SBA-COV-04-120

SBA-COV-04-72

SBA-COV-04-60

SBP-COV-04-144

SBP-COV-04-120

SBP-COV-04-72

SBP-COV-04-60

SBG-COV-04-144

SBG-COV-04-120

SBG-COV-04-72

SBG-COV-04-60

SBA-COV-06-144

SBA-COV-06-120

SBA-COV-06-72

SBA-COV-06-60

SBP-COV-06-144

SBP-COV-06-120

SBP-COV-06-72

SBP-COV-06-60

SBG-COV-06-144

SBG-COV-06-120

SBG-COV-06-72

SBG-COV-06-60

808A40-03-144

808A40-03-120

808A40-03-72

808A40-03-60

808A40-04-144

808A40-04-120

808A40-04-72

808A40-04-60

808A40-06-144

808A40-06-120

808A40-06-72

808A40-06-60

808ZN40-03-144

808ZN40-03-120

808ZN40-03-72

808ZN40-03-60

808G40-03-144

808G40-03-120

808G40-03-72

808G40-03-60

808ZN40-04-144

808ZN40-04-120

808ZN40-04-72

808ZN40-04-60

808G40-04-144

808G40-04-120

808G40-04-72

808G40-04-60

808ZN40-06-144

808ZN40-06-120

808ZN40-06-72

808ZN40-06-60

808G40-06-144

808G40-06-120

808G40-06-72

808G40-06-60

Covers Part Numbering

SB A COV - 03 - 120Example:

MATERIAL A = AluminumG = Type 1 - HDGAFP = Pre-Galvanized Steel

TYPE SB =Solid Bottom

TRAY WIDTH 3 = 3”4 = 4”6 = 6”

TRAY LENGTH

120 = 10’144 = 12’

SB(*)-9023

SB(*)-9024

SB(*)-9026

9(*)-9023

9(*)-9024

9(*)-9026

in. mm

3 76

4 101

6 152


This clamp is used to hold both the cable channeland cover in place at the same time.

• Furnished as one clamp.

• Order 1/4” hardware separately.

• (*) Insert: A, G, P, SS6

Connector Part Numbering

S A - 04 - 90HC 060Example:

MATERIAL A = AluminumG = Type 1 - HDGAF

CONNECTOR TYPE 90HC = 90° HorizontalHTC = Horizontal TeeHXC = Horizontal Cross90VC = 90° VerticalPC = Pivot Connector

TRAY WIDTH

3 = 3”4 = 4”6 = 6”

RADIUS

Horizontal Connectors060 = 0” & 6” Radii

Vertical Connectors00 = 0” Radius06 = 6” Radius

• Provides 0 or 6-inch radius connection for Cable Channel• The Pivot Connector is available for custom angle adjustment• up to +/– 45° angle adjustment• order the desired quantity separately• Slotted for easy cable fastening• Shipped with the required hardware

HORIZONTAL CONNECTORS

CORPORATE OFFICE:4 INTERNATIONAL DRIVE

RYEBROOK, NEW YORK 10573PHONE: (914) 934-2075

FAX: (914) 934-2190

WIDTH

WIDTH

WIDTH

ORDERING DATA

060MATERIAL WIDTH

03 = 3"04 = 4"06 = 6"

A = ALUMINUMP = PREGLAV STEELG = HDGAF STEEL

SS4 = STAINLESS STEEL 304SS6 = STAINLESS STEEL 316

FITTINGTYPE

HTC = HORIZONTAL TEE CONNECTOR

XS XX HC

CABLE TRAYCHANNEL TRAY SeriesNOTES:1.) ATTACH CONNECTOR TO CHANNEL TRAY USING PROVIDED HARDWARE.2.) VIEWS FOR REFERENCE - DO NOT SCALE.

CHANNEL TRAY SeriesSX-XX-HTC060 - HORIZONTAL TEE CONNECTOR

12/13/2012 DOCUMENT REFERENCE NUMBER: SX-XX-HTC060

Tee Cross

Pivot Connector

90 HB

SB(*)-COVCL-03

SB(*)-COVCL-04

SB(*)-COVCL-06

SB(*)-9033

SB(*)-9034

SB(*)-9036

9(*)-9033

9(*)-9034

9(*)-9036

in. mm

in. mm

3 76

4 101

6 152

3 76

4 101

6 152

CATALOG #

CATALOG #

CHANNEL WIDTH

CHANNEL WIDTH

NEW INNOVATION

Available only from MonoSystems, the CoverClip makes it easier to open or close the cover without the need for additional hardware or tools.

Wrap-Around Cover Clamps are used to securely hold a cover oncable channel in locations where strong winds can prevail. • Furnished as one

clamp with hardware.


• Use the same part for OV and IV applications• Slotted for easy cable fastening• The Pivot Connector is available for custom angle

adjustment (order separately)

VERTICAL CONNECTORS

90º Bend6” radius



FAX: (914) 934-2190

3 716 "

CHANNELWIDTH

90°

3 716 "

ORDERING DATA

S

90 = 9003 = 3"04 = 4"06 = 6"

A = ALUMINUMP = PREGLAV STEELG = HDGAF STEEL


FITTING TYPEVC = 90 VERTICAL

CONNECTOR

ANGLECHANNELWIDTH

MATERIAL

X XX 90 VC 00

Cable TrayChannel Tray SeriesNOTES:1.) ATTACH CONNECTOR TO CHANNEL TRAY USING PROVIDED 3/8" HARDWARE.2.) VIEWS FOR REFERENCE - DO NOT SCALE.

Channel Tray SeriesSX-XX-90VC00 - VERTICAL CONNECTOR

12/11/2012 DOCUMENT REFERENCE NUMBER:SX-XX-90VC00

90º Square Connector0” radius

Pivot Connector

90° Bend



FAX: (914) 934-2190

CHANNELWIDTH

CHANNELWIDTH

S X

HC = HORIZONTAL CONNECTOR

FITTINGTYPEA = ALUMINUM

P = PREGLAV STEELG = HDGAF STEEL


03 = 3"04 = 4"06 = 6"

WIDTHMATERIAL

060

ORDERING DATA

HC90

FITTINGANGLE

90

XX

CABLE TRAYChannel Tray SeriesNOTES:1.) ATTACH CONNECTOR TO CHANNEL TRAY USING PROVIDED HARDWARE.2.) VIEWS FOR REFERENCE - DO NOT SCALE.

Channel Tray SeriesSX-XX-90HC060 - 90 HORIZONTAL CONNECTOR

12/14/2012 DOCUMENT REFERENCE NUMBER: SX-XX-90HC060

6. Channel Tray 7. Channel Tray

COMBINATION HOLD-DOWN & COVER CLAMPCOVER CLIP

WRAP-AROUND COVER CLAMP






Cable Channel Connector Part Numbering

SB A - 03 - 90HB 24Example:

MATERIAL A = AluminumG = Type 1 - HDGAFSS4 = 304 Stainless Steel SS6 = 316 Stainless Steel

STYLE B = Solid BottomV = Vented Bottom

CONNECTOR TYPE HB = Horizontal BendHT = Horizontal TeeHX = Horizontal CrossIV = Vertical Inside BendOV = Vertical Outside Bend

TRAY WIDTH 3 = 3”4 = 4”6 = 6”

RADIUS 12 = 12” 24 = 24”36 = 36”48 = 48”

Fittings engineered with 3” tangents for splicing integrity.FITTINGS

Non-Ventilated Horizontal Bend

Ventilated Verticle Bend

Non-Ventilated Tee

Ventilated Horizontall Cross

FITTINGS FITTINGS

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

CATALOG # A B CBEND RADIUS

in. mm in. mm in. mm in. mm in. mm

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

161/4 412 93/8 239 103/4 273

165/8 422 95/8 245 111/2 83

171/2 445 10 254 115/8 296

265/8 819 153/8 391 173/4 451

27 686 155/8 397 18 450

277/8 708 16 406 185/8 466

37 940 213/8 543 245/8 625

373/8 949 215/8 549 25 635

381/4 972 22 559 251/2 648

473/8 1203 273/8 695 315/8 803

477/8 1216 275/8 702 317/8 810

485/8 1235 28 711 321/2 826

(Pre)-03-60HB12

(Pre)-04-60HB12

(Pre)-06-60HB12

(Pre)-03-60HB24

(Pre)-04-60HB24

(Pre)-06-60HB24

(Pre)-03-60HB36

(Pre)-04-60HB36

(Pre)-03-60HB36

(Pre)-03-60HB48

(Pre)-04-60HB48

(Pre)-06-60HB48

SB(*)-03-60HB12

SB(*)-04-60HB12

SB(*)-06-60HB12

SB(*)-03-60HB24

SB(*)-04-60HB24

SB(*)-06-60HB24

SB(*)-03-60HB36

SB(*)-04-60HB36

SB(*)-03-60HB36

SB(*)-03-60HB48

SB(*)-04-60HB48

SB(*)-06-60HB48

TRAY WIDTH

1 splice plate with hardware included.

60° HORIZONTAL BEND


12 305

24 609

36 915

48 1218

CATALOG # A B CBEND RADIUS

in. mm in. mm in. mm in. mm in. mm

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

For Vented style Fittings, change prefix to SV. Example: SB(*)-03-90HB12 would be SV(*)-03-90HB12


16.5 419

17 432

18 457

28.5 723

29 737

30 762

40.5 1029

41 1041

42 1067

52.5 1334

53 1346

54 1372

16.5 419

17 432

18 457

28.5 723

29 737

30 762

40.5 1029

41 1041

42 1067

52.5 1334

53 1346

54 1372

16.5 419

17 432

18 457

28.5 723

29 737

30 762

40.5 1029

41 1041

42 1067

52.5 1334

53 1346

54 1372

(Pre)-03-90HB12

(Pre)-04-90HB12

(Pre)-06-90HB12

(Pre)-03-90HB24

(Pre)-04-90HB24

(Pre)-06-90HB24

(Pre)-03-90HB36

(Pre)-04-90HB36

(Pre)-06-90HB36

(Pre)-03-90HB48

(Pre)-04-90HB48

(Pre)-06-90HB48

SB(*)-03-90HB12

SB(*)-04-90HB12

SB(*)-06-90HB12

SB(*)-03-90HB24

SB(*)-04-90HB24

SB(*)-06-90HB24

SB(*)-03-90HB36

SB(*)-04-90HB36

SB(*)-06-90HB36

SB(*)-03-90HB48

SB(*)-04-90HB48

SB(*)-06-90HB48

TRAY WIDTH

90° HORIZONTAL BEND

1 splice plate with hardware included.



90o

HBC

CR

3” (76) B

A

90o

HBC

CR

3” (76) B

A

A

B

R

3” (76)

C

C

HB60o

A

B

R

3” (76)

C

C

HB60o


12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

CATALOG # CATALOG #

CATALOG #CATALOG #

A A

AA

B B

BB

C

C

BEND RADIUS BEND RADIUS

BEND RADIUSBEND RADIUS

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm

in. mm

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

(Pre)-03-45HB12

(Pre)-04-45HB12

(Pre)-06-45HB12

(Pre)-03-45HB24

(Pre)-04-45HB24

(Pre)-06-45HB24

(Pre)-03-45HB36

(Pre)-04-45HB36

(Pre)-06-45HB36

(Pre)-03-45HB48

(Pre)-04-45HB48

(Pre)-06-45HB48

(Pre)-03-HT12

(Pre)-04-HT12

(Pre)-06-HT12

(Pre)-03-HT24

(Pre)-04-HT24

(Pre)-06-HT24

(Pre)-03-HT36

(Pre)-04-HT36

(Pre)-06-HT36

(Pre)-03-HT48

(Pre)-04-HT48

(Pre)-06-HT48

(Pre)-03-HC12

(Pre)-04-HC12

(Pre)-06-HC12

(Pre)-03-HC24

(Pre)-04-HC24

(Pre)-06-HC24

(Pre)-03-HC36

(Pre)-04-HC36

(Pre)-06-HC36

(Pre)-03-HC48

(Pre)-04-HC48

(Pre)-06-HC48

(Pre)-03-30HB12

(Pre)-04-30HB12

(Pre)-06-30HB12

(Pre)-03-30HB24

(Pre)-04-30HB24

(Pre)-06-30HB24

(Pre)-03-30HB36

(Pre)-04-30HB36

(Pre)-06-30HB36

(Pre)-03-30HB48

(Pre)-04-30HB48

(Pre)-06-30HB48

SB(*)-03-45HB12

SB(*)-04-45HB12

SB(*)-06-45HB12

SB(*)-03-45HB24

SB(*)-04-45HB24

SB(*)-06-45HB24

SB(*)-03-45HB36

SB(*)-04-45HB36

SB(*)-06-45HB36

SB(*)-03-45HB48

SB(*)-04-45HB48

SB(*)-06-45HB48

SB(*)-03-HT12

SB(*)-04-HT12

SB(*)-06-HT12

SB(*)-03-HT24

SB(*)-04-HT24

SB(*)-06-HT24

SB(*)-03-HT36

SB(*)-04-HT36

SB(*)-06-HT36

SB(*)-03-HT48

SB(*)-04-HT48

SB(*)-06-HT48

SB(*)-03-HC12

SB(*)-04-HC12

SB(*)-06-HC12

SB(*)-03-HC24

SB(*)-04-HC24

SB(*)-06-HC24

SB(*)-03-HC36

SB(*)-04-HC36

SB(*)-06-HC36

SB(*)-03-HC48

SB(*)-04-HC48

SB(*)-06-HC48

SB(*)-03-30HB12

SB(*)-04-30HB12

SB(*)-06-30HB12

SB(*)-03-30HB24

SB(*)-04-30HB24

SB(*)-06-30HB24

SB(*)-03-30HB36

SB(*)-04-30HB36

SB(*)-06-30HB36

SB(*)-03-30HB48

SB(*)-04-30HB48

SB(*)-06-30HB48

TRAY WIDTH TRAY WIDTH

TRAY WIDTHTRAY WIDTH

1 splice plate with hardware included. 2 splice plates with hardware included.

2 splice plates with hardware included.1 splice plate with hardware included.

45° HORIZONTAL BEND HORIZONTAL TEE

HORIZONTAL CROSS30° HORIZONTAL BEND

145/8 371 61/8 156 85/8 219

15 381 61/4 159 87/8 225

153/4 400 61/2 165 91/4 235

231/8 587 95/8 244 135/8 346

231/2 597 93/4 248 133/4 249

241/8 613 10 254 141/8 359

315/8 803 131/8 334 185/8 473

32 813 131/4 337 183/4 476

323/4 832 131/2 343 191/8 486

401/8 1019 165/8 422 231/2 597

401/2 1029 163/4 425 233/4 603

411/8 1045 17 432 241/8 613

145/8 371 61/8 156

15 381 61/4 159

153/4 400 61/2 165

231/8 587 95/8 244

231/2 597 93/4 248

241/8 613 10 254

315/8 803 131/8 334

32 813 131/4 337

323/4 832 131/2 343

401/8 1019 165/8 422

401/2 1029 163/4 425

411/8 1045 17 432

161/2 419 33 838

17 432 34 864

18 457 36 914

281/2 723 57 1448

29 737 58 1473

30 762 60 1524

401/2 1029 81 2057

41 1041 82 2083

42 1067 84 2134

521/2 1334 105 2667

53 1346 106 2692

54 1372 108 2743

123/8 314 31/4 83 65/8 168

125/8 321 33/8 86 63/4 171

131/8 334 31/2 89 7 178

183/8 467 47/8 124 97/8 251

185/8 473 5 127 10 254

191/8 486 51/8 130 101/4 260

243/8 619 61/2 165 13 330

245/8 626 65/8 168 131/8 334

251/8 638 63/4 171 131/2 343

303/8 772 81/8 207 161/4 413

305/8 778 81/4 210 163/8 416

311/8 791 83/8 213 165/8 422

FITTINGSFITTINGS





A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX

A

B

R

3” (76)

W

HT

A

B

R

3” (76)

C

C

HB45o

A

B

R

3” (76)

C

C

HB30o

B

R

3” (76)A

W

HX






12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

CATALOG # CATALOG #

CATALOG # CATALOG #

A A

A A

B B

B B

C C

C C



in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

(Pre)-03-90OV12

(Pre)-04-90OV12

(Pre)-06-90OV12

(Pre)-03-90OV24

(Pre)-04-90OV24

(Pre)-06-90OV24

(Pre)-03-90OV36

(Pre)-04-90OV36

(Pre)-06-90OV36

(Pre)-03-90OV48

(Pre)-04-90OV48

(Pre)-06-90OV48

(Pre)-03-45OV12

(Pre)-04-45OV12

(Pre)-06-45OV12

(Pre)-03-45OV24

(Pre)-04-45OV24

(Pre)-06-45OV24

(Pre)-03-45OV36

(Pre)-04-45OV36

(Pre)-06-45OV36

(Pre)-03-45OV48

(Pre)-04-45OV48

(Pre)-06-45OV48

(Pre)-03-60OV12

(Pre)-04-60OV12

(Pre)-06-60OV12

(Pre)-03-60OV24

(Pre)-04-60OV24

(Pre)-06-60OV24

(Pre)-03-60OV36

(Pre)-04-60OV36

(Pre)-06-60OV36

(Pre)-03-60OV48

(Pre)-04-60OV48

(Pre)-06-60OV48

(Pre)-03-30OV12

(Pre)-04-30OV12

(Pre)-06-30OV12

(Pre)-03-30OV24

(Pre)-04-30OV24

(Pre)-06-30OV24

(Pre)-03-30OV36

(Pre)-04-30OV36

(Pre)-06-30OV36

(Pre)-03-30OV48

(Pre)-04-30OV48

(Pre)-06-30OV48

SB(*)-03-90OV12

SB(*)-04-90OV12

SB(*)-06-90OV12

SB(*)-03-90OV24

SB(*)-04-90OV24

SB(*)-06-90OV24

SB(*)-03-90OV36

SB(*)-04-90OV36

SB(*)-06-90OV36

SB(*)-03-90OV48

SB(*)-04-90OV48

SB(*)-06-90OV48

SB(*)-03-45OV12

SB(*)-04-45OV12

SB(*)-06-45OV12

SB(*)-03-45OV24

SB(*)-04-45OV24

SB(*)-06-45OV24

SB(*)-03-45OV36

SB(*)-04-45OV36

SB(*)-06-45OV36

SB(*)-03-45OV48

SB(*)-04-45OV48

SB(*)-06-45OV48

SB(*)-03-60OV12

SB(*)-04-60OV12

SB(*)-06-60OV12

SB(*)-03-60OV24

SB(*)-04-60OV24

SB(*)-06-60OV24

SB(*)-03-60OV36

SB(*)-04-60OV36

SB(*)-06-60OV36

SB(*)-03-60OV48

SB(*)-04-60OV48

SB(*)-06-60OV48

SB(*)-03-30OV12

SB(*)-04-30OV12

SB(*)-06-30OV12

SB(*)-03-30OV24

SB(*)-04-30OV24

SB(*)-06-30OV24

SB(*)-03-30OV36

SB(*)-04-30OV36

SB(*)-06-30OV36

SB(*)-03-30OV48

SB(*)-04-30OV48

SB(*)-06-30OV48



1 splice plate with hardware included. 1 splice plate with hardware included.


90° VERTICAL OUTSIDE BEND 45° VERTICAL OUTSIDE BEND

60° VERTICAL OUTSIDE BEND 30° VERTICAL OUTSIDE BEND

15 381 15 381 15 381

27 686 27 686 27 686

39 991 39 991 39 991

51 1295 51 1295 51 1295

135/8 346 55/8 143 8 203

221/4 565 91/4 235 13 330

301/2 775 125/8 321 177/8 454

39 991 161/8 410 227/8 581

147/8 378 81/2 216 97/8 251

253/8 645 145/8 372 167/8 428

355/8 905 205/8 524 233/4 603

461/8 1172 265/8 676 303/4 781

115/8 296 31/8 79 61/4 158

171/2 445 47/8 124 93/8 238

231/2 597 63/8 162 125/8 321

295/8 753 8 203 157/8 403

FITTINGSFITTINGS





3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO

3” (76)

C

C

C

A

B

90˚VO

3” (76)

C

C

R

A

B

45˚VO

3” (76)

3” (76)

C

RR

C

A

B

C

R

A

C

30˚VO60˚

VO






12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

12 305

24 609

36 915

48 1218

CATALOG # CATALOG #

CATALOG # CATALOG #

A A

A A

B B

B B

C C

C C



in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

in. mm in. mm

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

3 76

4 101

6 152

(Pre)-03-90IV12

(Pre)-04-90IV12

(Pre)-06-90IV12

(Pre)-03-90IV24

(Pre)-04-90IV24

(Pre)-06-90IV24

(Pre)-03-90IV36

(Pre)-04-90IV36

(Pre)-06-90IV36

(Pre)-03-90IV48

(Pre)-04-90IV48

(Pre)-06-90IV48

(Pre)-03-45IV12

(Pre)-04-45IV12

(Pre)-06-45IV12

(Pre)-03-45IV24

(Pre)-04-45IV24

(Pre)-06-45IV24

(Pre)-03-45IV36

(Pre)-04-45IV36

(Pre)-06-45IV36

(Pre)-03-45IV48

(Pre)-04-45IV48

(Pre)-06-45IV48

(Pre)-03-60IV12

(Pre)-04-60IV12

(Pre)-06-60IV12

(Pre)-03-60IV24

(Pre)-04-60IV24

(Pre)-06-60IV24

(Pre)-03-60IV36

(Pre)-04-60IV36

(Pre)-06-60IV36

(Pre)-03-60IV48

(Pre)-04-60IV48

(Pre)-06-60IV48

(Pre)-03-30IV12

(Pre)-04-30IV12

(Pre)-06-30IV12

(Pre)-03-30IV24

(Pre)-04-30IV24

(Pre)-06-30IV24

(Pre)-03-30IV36

(Pre)-04-30IV36

(Pre)-06-30IV36

(Pre)-03-30IV48

(Pre)-04-30IV48

(Pre)-06-30IV48

SB(*)-03-90IV12

SB(*)-04-90IV12

SB(*)-06-90IV12

SB(*)-03-90IV24

SB(*)-04-90IV24

SB(*)-06-90IV24

SB(*)-03-90IV36

SB(*)-04-90IV36

SB(*)-06-90IV36

SB(*)-03-90IV48

SB(*)-04-90IV48

SB(*)-06-90IV48

SB(*)-03-45IV12

SB(*)-04-45IV12

SB(*)-06-45IV12

SB(*)-03-45IV24

SB(*)-04-45IV24

SB(*)-06-45IV24

SB(*)-03-45IV36

SB(*)-04-45IV36

SB(*)-06-45IV36

SB(*)-03-45IV48

SB(*)-04-45IV48

SB(*)-06-45IV48

SB(*)-03-60IV12

SB(*)-04-60IV12

SB(*)-06-60IV12

SB(*)-03-60IV24

SB(*)-04-60IV24

SB(*)-06-60IV24

SB(*)-03-60IV36

SB(*)-04-60IV36

SB(*)-06-60IV36

SB(*)-03-60IV48

SB(*)-04-60IV48

SB(*)-06-60IV48

SB(*)-03-30IV12

SB(*)-04-30IV12

SB(*)-06-30IV12

SB(*)-03-30IV24

SB(*)-04-30IV24

SB(*)-06-30IV24

SB(*)-03-30IV36

SB(*)-04-30IV36

SB(*)-06-30IV36

SB(*)-03-30IV48

SB(*)-04-30IV48

SB(*)-06-30IV48





90° VERTICAL INSIDE BEND 45° VERTICAL INSIDE BEND

60° VERTICAL INSIDE BEND 30° VERTICAL INSIDE BEND

161/4 413 161/4 413 161/4 413

163/4 425 163/4 425 163/4 425

163/4 425 163/4 425 163/4 425

281/4 718 281/4 718 281/4 718

283/4 730 283/4 730 283/4 730

283/4 730 283/4 730 283/4 730

401/4 1024 401/4 1024 401/4 1024

403/4 1035 403/4 1035 403/4 1035

403/4 1035 403/4 1035 403/4 1035

521/4 1327 521/4 1327 521/4 1327

523/4 1340 523/4 1340 523/4 1340

523/4 1340 523/4 1340 523/4 1340

141/2 368 6 152 81/2 216

147/8 373 61/8 156 83/4 222

147/8 373 61/8 156 83/4 222

23 584 91/2 241 131/2 343

231/4 591 95/8 245 135/8 346

231/4 591 95/8 245 135/8 346

313/8 797 13 330 183/8 467

313/4 806 131/8 330 185/8 473

313/4 806 131/8 330 185/8 473

397/8 1013 161/2 419 233/8 594

403/8 1026 163/4 425 235/8 600

403/8 1026 163/4 425 235/8 600

16 406 91/4 235 105/8 270

161/2 419 91/2 241 11 280

161/2 419 91/2 241 11 280

261/2 673 151/4 387 175/8 448

267/8 683 151/2 394 177/8 454

267/8 683 151/2 394 177/8 454

363/4 933 211/4 540 241/2 622

371/8 943 213/8 543 243/4 629

371/8 943 213/8 543 243/4 629

471/8 1197 271/8 689 313/8 797

475/8 1210 271/2 699 313/4 806

475/8 1210 271/2 699 313/4 806

121/8 308 31/8 83 61/2 165

123/8 314 33/8 86 65/8 163

123/8 314 33/8 86 65/8 163

181/8 461 43/4 121 93/4 248

183/8 467 47/8 86 97/8 163

183/8 467 47/8 86 97/8 163

241/4 616 61/2 165 13 330

241/2 622 65/8 168 131/8 334

241/2 622 65/8 168 131/8 334

303/8 772 81/8 207 161/4 413

305/8 778 81/4 210 163/8 416

305/8 778 81/4 210 163/8 416

FITTINGS





3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI

3” (76)

A

RC

C

B

90˚VI

3” (76)

AC

C

R

B

45˚VI

3” (76)

A

R

C

CB

60˚VI

3” (76)

A

R

CC

B

30˚VI





P h o n e : 9 1 4 . 9 3 4 . 2 0 7 5 • To l l - F r e e : 8 8 8 . 7 6 4 . 7 6 8 1 • F a x : 9 1 4 . 9 3 4 . 2 1 9 0 • w w w . m o n o s y s t e m s . c o m

SECTION 1- ACCEPTABLE MANUFACTURERS

1.01 Manufacturer: Subject to compliance with these specifications, channel tray systems shall be as manufactured by MonoSystems, Inc., 4 International Dr., Rye Brook, NY 10573, Tel: 914-934-2075, www.monosystems.com

1.02 References: A. ANSI/NFPA70 - NEC 1.03 Quality assurance: A. Manufacturer engaged in the fabrication of cable trays and fittings for not less than 5 years. B. UL Compliance: Products are UL classified - (FILE: E80034 VOLUME 3) C. NEMA Compliance: Comply with NEMA Standard VE1-2 D. NEC Compliance: Comply with NEC Article 392 E. NFPA Compliance: Comply with NFPA 70B.

SECTION 2- SELECTION AND COMPONENTS

2.01 Channel tray shall be available in two styles: Solid bottom and Ventliated. A complete offering of accessories, fittings, and connectors is to be complete and available for both styles and in all marketed sizes such to create a complete system. Channel tray shall be free of burrs and sharp edges.

2.02 Materials and finishes: Material and finishes specifications for each channel tray are as follows:

1. Aluminum: Extruded components shall be made from Aluminum Association Alloy 6063. All fabricated parts shall be made from Aluminum Association Alloy 5052. 2. Pre-Galvanized Steel: Straight sections and fittings shall be made from structural quality mill galvanized 14 gauge steel meeting the properties of ASTM A653SS, coating designation G90. 3. Hot Dip Galvanized Steel: Straight sections and fittings shall be made from 14 gauge structural quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 and shall be hot-dip galvanized after fabrication in accordance with ASTM A123. 4. Stainless Steel: Straight sections and fittings shall be AISI Type [304] [316].

2.03 Channel tray straight sections shall be constructed with either solid flat bottoms, or ventilated flat bottom. Ventilated bottom shall be perforated with 2.25” diameter holes and have slots to facilitate the use of cable ties to secure the cables.

2.04 Straight sections shall be supplied in standard [12 foot] [10 foot (3 m)] lengths, except where shorter lengths are permitted to facilitate tray assembly as shown on drawings.

2.05 Ventilated straight sections shall have splice holes every 12 inches to simplify field modifications.

2.06 Channel Tray width shall be [3] [4] [6] inches with a minimum loading depth of 1-1/4”.

2.07 Fittings will have a minimum radius of [12] [24] [36] [48] inches.

2.08 Splice plates and hardware shall be included with each straight section and fitting.

2.09 Recommended Torque for 3/8” Channel Tray Fastener hardware: 25-35 Ft-lbs [33.9-47.5 N-m].

CHANNEL TRAY SPECIFICATION

Documents

CHANNEL TRAY - MonoSystems€¦ · compare our channel tray line with a popular brand. By specifying MonoSystems channel tray parts you can be confident that all of our parts are