Upload
syed-yawer-imam
View
76
Download
26
Embed Size (px)
DESCRIPTION
SRB
Citation preview
Implementation Solution for Change
Implementation
Solution for SRB over
HSDPA Activation
Prepared by: Date: 28/01/2015
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 1 of 14
Implementation Solution for Change
Reviewed by: Date:
Approved by: Date:
Contents
1 Description of Change......................................................................................................4
1.1 Description of Sites...............................................................................................4
1.2 Purpose and Requirements....................................................................................4
1.3 Description of Change and Change Influence.......................................................4
1.3.1 Software Version.........................................................................................................4
1.3.2 Monitoring and Maintenance Switches......................................................................5
1.3.3 Feature Related Parameters........................................................................................5
1.4 Change Period.......................................................................................................8
1.5 Composition of Change Team and Responsibility of Team Members..................8
1.5.1 Change Team of Optus......................................................................................8
1.5.2 Huawei On-site Change Team..........................................................................9
1.5.3 Huawei Support & Guarantee Team...............................................................9
1.6 Check of Equipment Running...............................................................................9
1.7 Change Risks and Countermeasures.....................................................................9
1.8 Issue terminals....................................................................................................10
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 2 of 14
Implementation Solution for Change
1.9 Check Before Change.........................................................................................10
2 Operation Steps for Change............................................................................................11
2.1 Change Steps.......................................................................................................11
2.1.1 Overall Description..............................................................................................11
2.1.2 Operation Steps for Change...........................................................................11
2.1.3 Script for Change..............................................................................................12
2.2 Test and Verification...........................................................................................12
2.3 Solution for Rollback In the Case of Failure.......................................................13
2.3.1 Definition of Change Failure...........................................................................13
2.3.2 Information Collection Before Rollback......................................................13
2.3.3 Overall Description of Rollback....................................................................13
2.3.4 Rollback Steps...................................................................................................13
2.3.5 Script for Rollback............................................................................................14
2.3.6 Equipment Status Check.................................................................................14
2.3.7 Rollback Risk Analysis....................................................................................14
2.4 Change of Spare Parts and Emergency Workstation...........................................14
1.1
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 3 of 14
Implementation Solution for Change
1 Description of Change
1.1 Description of Sites
The target sites of activating feature WRFD-010652 SRB over HSDPA are
HSDPA enabled site.
The current SRB is setup on DCH while HSDPA service is setup, the transmit
power control (TPC) command is transmitted to the UE on an A-DPCH. After
feature WRFD-010652 SRB over HSDPA is activated, downlink SRB of a support
UE are carried on HSDPA, and the A-DPCH is replaced with the F-DPCH.
1.2 Purpose and Requirements
F-DPCH binding with SRB over HSDPA can make full use of the downlink codes
and power due to replacing many DPCHs. As a result, it make more codes and
power available for HSDPA to improve the downlink capacity. (eg., if A-DPCH
using code SF=256, F-DPCH can be shared by 10 UEs, which means max 9
SF=256 codes and power resource can be saved). Moreover, the SRB over
HSDPA is prerequisite of another feature WRFD-010686 CPC-DTX/DRX which is
planned to be introduced to production network.
This feature requires both network and handsets to support.
1.3 Description of Change and Change Influence
To enable this feature, the network performance optimization parameters and
function switches are going to be tuned to ensure the user experiences.
1.3.1 Software Version
The WRFD-010652 SRB over HSDPA feature will be enabled on SRAN9.0
software RNC and NodeBs
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 4 of 14
Implementation Solution for Change
Technology Testing Performed Against
UMTS-RNC MBSC V900R016C00SPC620
UMTS-NodeB MBTS V100R009C00SPC120
1.3.2 Monitoring and Maintenance Switches
After WRFD-010652 SRB over HSDPA being enabled on production network,
there are risks that PS call drop rate will increase. The following switches will be
set to recommended value to facilitate the investigation and troubleshooting
process.
Parameter Name Parameter IDRecommend Setting
Current Setting
Process Control Switch 2 PROCESSSWITCH2 RNC_PCHR_O
UTPUT_CTRL_
SWITCH-0
PCHR_OUTPUT
_CTRL_SWITC
H-0
Flow Type FlowType DCCC-1 DCCC-0
Flow Type FlowType SRB2_STAT-1 SRB2_STAT-0
1.3.3 Feature Related Parameters
The following parameters and switches strongly related to feature performance, which will
be set to recommended value.
Parameter Name Parameter IDRecommend Setting
Current Setting
Type of Channel
Preferably Carrying
Signaling RB
SrbChlType HSPA(UL_EDC
H,DL_HSDSCH)
.
HSUPA
Effective Flag of
Signaling RB Channel
Type
SrbChlTypeRrcEffectFl
ag
FALSE. FALSE
Cell Hspa Enhanced
function switch
HspaEnhSwitch E_F_DPCH_ON. E_F_DPCH_OF
F
Extra Power For Srb ExtraPowerForSrb 2 N/A
Dynamic Resource DraSwitch2 DRA_BASE_CO DRA_BASE_CO
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 5 of 14
Implementation Solution for Change
Parameter Name Parameter IDRecommend Setting
Current Setting
Allocation Switch 2 VER_LOAD_SR
B_H2D_SWITC
H-1
VER_LOAD_SR
B_H2D_SWITC
H-0
DL Non-HSPA Power
Initial Load State for SRB
H2D
SrbH2DNonHLoadState DL_OVERLOA
DED_STATE
DL_LOADED_S
TATE
RSCP Lower Thld for
SRB over HS-DSCH
SrbOverHsdpaRscpDow
nThd
-88 -90
RSCP Upper Thld for
SRB over HS-DSCH
SrbOverHsdpaRscpUpT
hd
-80 -80
Ec/N0 Lower Thld for
SRB over HS-DSCH
SrbOverHsdpaEcn0Dow
nThd
25 (-12dB) 29(-10dB)
Ec/N0 Upper Thld for
SRB over HS-DSCH
SrbOverHsdpaEcn0UpT
hd
31(-9dB) 35(-7dB)
HSPA Technologies
Retried by UEs
RetryCapability SRB_OVER_HS
DPA-1
SRB_OVER_HS
DPA-1
Fake EcNo FakeEcNo 25 (-12dB) 50(0.5dB)
Process Control Switch 2 PROCESSSWITCH2 RNC_PS_QUER
Y_UE_IMEI_S
WITCH-1
RNC_PS_QUER
Y_UE_IMEI_S
WITCH-0
Special User Function
Switch3
SpecUserFunctionSwitc
h3
SPECUSER_SR
B_OVER_HSDP
A_DISABLED_
SWITCH-1
N/A
Dynamic Resource
Allocation Switch 2DraSwitch2
DRA_PCPICH_ECN0_ON_RACH_UPDATE_SWITCH-1
DRA_PCPICH_ECN0_ON_RACH_UPDATE_SWITCH-0
FDPCH Maximum
Reference Power
FDPCH Maximum
Reference Power30(3dB)
-30(-3dB)
FDPCH Minimum
Reference PowerFdpchMinRefPwr -150(-15dB)
-200 (-20dB)
Cell Capability Container CellCapContainerFddFDPCH_SUPPORT-0
FDPCH_SUPPORT-0
Compatibility Switch CmpSwitchCMP_UU_FDPCH_COMPAT_SWITCH-0
CMP_UU_FDPCH_COMPAT_SWITCH-0
UALGORSVPARA RsvSwitch11 RESERVED_SWITCH_11_BIT
RESERVED_SWITCH_11_BIT
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 6 of 14
Implementation Solution for Change
Parameter Name Parameter IDRecommend Setting
Current Setting
Reserved swtich 5-1 5-0
UALGORSVPARA
Reserved swtichRsvSwitch7
RESERVED_SWITCH_7_BIT14-0
RESERVED_SWITCH_7_BIT14-1
UALGORSVPARA
Reserved swtichRsvSwitch11
RESERVED_SWITCH_11_BIT12-1
RESERVED_SWITCH_11_BIT12-1
Optimization Switch Optimization SwitchPS_RL_SETUP_SWITCH-1
PS_RL_SETUP_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4IUR_RL_REEST_SWITCH-1
IUR_RL_REEST_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4TRB_RESET_RL_REEST_SWITCH-1
TRB_RESET_RL_REEST_SWITCH-1
Optimization Switch OptimizationSwitchSRB_RESET_RL_SETUP_SWITCH-1
SRB_RESET_RL_SETUP_SWITCH-1
Optimization Switch OptimizationSwitchRLFAIL_RL_SETUP_SWITCH-1
RLFAIL_RL_SETUP_SWITCH-1
Optimization Switch OptimizationSwitchRL_RESTORE_SWITCH-1
RL_RESTORE_SWITCH-1
Optimization Switch OptimizationSwitch ASU_RL_RESET_SWITCH-1
ASU_RL_RESET_SWITCH-1
Optimization Switch OptimizationSwitch MC_RL_RESET_SWITCH-1
MC_RL_RESET_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4PHY_RECFG_REEST_SWITCH-1
PHY_RECFG_REEST_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4PHYCHRECFG_ENH_RL_REEST_SWITCH-1
PHYCHRECFG_ENH_RL_REEST_SWITCH-0
Process Control Switch 4 PROCESSSWITCH4RB_SETUP_ENHANCE_RL_REEST_SWITCH-1
RB_SETUP_ENHANCE_RL_REEST_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4RBRECFG_ENH_RL_REEST_SWITCH-1
RBRECFG_ENH_RL_REEST_SWITCH-1
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 7 of 14
Implementation Solution for Change
Parameter Name Parameter IDRecommend Setting
Current Setting
Optimization Switch OptimizationSwitch RB_RECFG_RL_REEST_SWITCH-1
RB_RECFG_RL_REEST_SWITCH-1
Improvement Switch Improvement Switch NON_DCCC_RBRECFG_RL_REEST_SWITCH-1
NON_DCCC_RBRECFG_RL_REEST_SWITCH-1
Improvement Switch Improvement Switch SMC_RL_REEST_SWITCH-1
SMC_RL_REEST_SWITCH-1
Process Control Switch 4 PROCESSSWITCH4IRATHO_HOCANCEL_RL_REEST_SWITCH-1
IRATHO_HOCANCEL_RL_REEST_SWITCH-0
Optimization Switch OptimizationSwitch UE_SRB_RESET_SWITCH-1
UE_SRB_RESET_SWITCH-1
Process Control Switch 2 PROCESSSWITCH2 CELLUPT_RLFAILURE_SRBREESTAB_SWITCH-1
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH-1
Performance
Enhancement Switch 3
PerfEnhanceSwitch3 PERFENH_RLRESETUP_GUARANTEE_SWITCH-1
PERFENH_RLRESETUP_GUARANTEE_SWITCH-0
Optimization Switch6 OptimizationSwitch6 ASU_RSP_FAIL_REL_UE-1
ASU_RSP_FAIL_REL_UE-0
Process Control Switch 2 PROCESSSWITCH2 ASU_RSP_TIMEOUT_HANDLE_SWITCH-1
ASU_RSP_TIMEOUT_HANDLE_SWITCH-1
1.4 Change Period
The change period is from 23:00, 16/02/2015 to 06:00 17/02/2015.
1.5 Composition of Change Team and Responsibility of Team Members
Feature Activation: Fan Bai
Drive test: Huawei DT team
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 8 of 14
Implementation Solution for Change
1.5.1 Change Team of Optus
Name Responsibility Telephone No.
Wance Shand Project Manager 0431 501 880
Ruth Foo RNC platform Owner 0402 974 738
Rainier Collantes Capacity Manager 0433 788 081
Marcin Wierzbicki RAE Prime 0434 739 988
Alan Loo Mobile Tier2 0434 763 295
Gabriel Prasad Mobile Tier2 0402 792 982
Shift Duty Tier I, GMS Pro Active 1800 505 777 * 3
1.5.2 Huawei On-site Change Team
Name Responsibility Telephone No.
Joyce Yu Project Manager 0432 329 858
Fan Bai RAN Engineer 0423 715 506
Mac Chin Technical Specialist 0434 679 157
Bill Li CSSD Manager 0425 510 050
1.5.3 Huawei Support & Guarantee Team
Name Responsibility Telephone No.
Cherry Li
Supporting overall
coordination as the
technical expert
0452 625 158
Bill LiProduct support contact
person
0425 510 050
1.6 Check of Equipment Running
It is required to check the health of the trial RNC and NodeB before feature
activation.
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 9 of 14
Implementation Solution for Change
1.7 Change Risks and CountermeasuresRisk existing in change duration: the PS call drop rate may increase after feature
activation.
No. Risk Description Possibility
(High/Middle/
Low)
Impact
(High/
Middle/Low)
Countermeasure
1 Data backup Low Low N/A
2 Impact on NEs Low Low RSSR, DCR, HO SSR
3Risk in change
duration
Middle Middle RSSR, DCR, HO SSR
1.8 Issue terminals
To our best knowledge, the following terminals are not compatible with SRB over HSDPA.
It is required to block these terminals to use SRB over HSDPA. The following table lists
the blacklisted terminals know by HUAWEI.
Description TAC
1 Blackberry BB9900 35427905
2 HUAWEI U8860 86894300
3 HUAWEI E367 35361304
4 HUAWEI E372 35314704
5 SAMSUNG Galaxy S2 35884804
6 Blackberry BB9810 35812304
7 MotorolaXT890 35253105
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 10 of 14
Implementation Solution for Change
1.9 Check Before Change
No. Preparations Before Change Owner Completion
Date
1 Solution for rollback in the case of failure Fan Bai
2 Test solution Mac. Chin
3 Confirming change risks and emergency
measures
Fan Bai
4 Readiness of mobile phone test card Mac. Chin
5 Readiness of change test personnel Mac. Chin
6 Readiness of relevant equipment
maintenance personnel
N/A
7 Readiness of support & guarantee team Mac. Chin
8 Readiness of remote log-in environment Fan Bai
9 Readiness of emergency spare parts N/A
10 Readiness of boards, tools, and
instruments
N/A
2 Operation Steps for Change
2.1 Change Steps
2.1.1 Overall Description
The whole procedure of change is composed of following sub-tasks
Pre- Drive test
Data Backup(Configuration, Alarm .etc)
Check the path for transmitting SRBs has been configured.
Run Script to activate SRB over HSDPA
Turn on License Control item of SRB over HSDPA
System Verification
Post- Drive test
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 11 of 14
Implementation Solution for Change
2.1.2 Operation Steps for Change
No. Change Step Operation Implementation
Person
Time
1 Pre-Drive
testDrive test for benchmark
DT team 12:00
2Data backup
Backup Configuration file ,
Active Alarm, License file
Fan Bai 23:00
3 Check the
configuration
Check the path for transmitting
SRBs has been configured
Fan Bai 23:30
4 Feature
Activation
Turn On Feature Switches and
License Control
Fan Bai 0:00
5 System
verification
Alarm check
KPI monitoring
Fan Bai 1:30
6 KPI report Fan Bai 3:00
7 Post-Drive
testDrive test
DT team 12:00
2.1.3 Script for Change
2.2 Test and Verification
No. Operation Item Operation Method Owner Time
1 Alarm Check Clear new Alarm caused by
feature activation if applicable
Fan
Bai
0:00
2 KPI monitoring Confirm Major KPI
performance is no degradation
Fan
Bai
2:00
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 12 of 14
Implementation Solution for Change
3 Drive test Post Drive Test DT
team
12:00
2.3 Solution for Rollback In the Case of Failure
2.3.1 Definition of Change Failure
A change failure shall be recognized if the major KPI degradation could
not be resolved before 4:00 am.
Upon the suiation of change failure, rollback operation shall be taken
and finished before 6:00 am.
2.3.2 Information Collection Before Rollback
Configuration file
Operation Log
Performance Data
CHR, PCHR
2.3.3 Overall Description of Rollback
Data Backup(Configuration, Alarm .etc)
Run Script to rollback the configuration
System Verification
Post- Drive test
2.3.4 Rollback Steps
No. Change Step Operation Implementation
Person
Time
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 13 of 14
Implementation Solution for Change
1Data backup
Backup Configuratio file ,
Active Alarm, License file
Fan Bai 4:00
2 Feature
deactivation
Run roll back scripts to turn
Off Feature Swicthes
Fan Bai 4:30
3 System
verification
Alarm check
KPI monitoring
Fan Bai 5:30
5 KPI report Fan Bai 6:00
2.3.5 Script for Rollback
2.3.6 Equipment Status Check
N/A
2.3.7 Rollback Risk Analysis
N/A
2.4 Change of Spare Parts and Emergency Workstation
N/A
Technical support website: http://support.huawei.com
Technical support hotline:Fax:
Page 14 of 14