CHANCE NEW ADDITIONS - · PDF fileCHANCE® NEW ADDITIONS. hubbellpowersystems.com 22” x 22” Blankets Lightweight Conductor ... and IEC 60855 standards • Heavy Duty

h u b b e l l p o w e r s y s t e m s . c o m

CHANCE® NEW ADDITIONS


CHANCE® 2017 NEW ADDITIONS

ABS Pole CoversAdded January 2017

In-line Rubber Blanket ClampAdded June 2017

ASTM 5H and 6H Rated Cluster BarsAdded June 2017


Multi-Range Voltage Indicator

Proximity Voltage Indicator

Fall Restraint Bracket Crossarm Link Stick 1500lb & 3500lb

Crossarm Change-Out Assist Tool

DA Bolt Puller

Impact Disconnect Stick

27kV Portable Load Break Tool

Adjustable Sheave Adapters

Universal Extension Arm

Rescue Hook



22” x 22” Blankets Lightweight Conductor Cover

Flexible Cutout Covers

Overhead Switch Barrier Pole Protector Two Color Class 0 Gloves

Red Class 0 and 00 Gloves


5H Ground Sets

CLUSTER BARSCHANCE® 5H AND 6H RATED

NOW TESTED PER ASTM F855-15 TO GRADES 5H AND 6H

CHANCE Cluster Bars have been used for nearly 50 years! In keeping up with industry needs, CHANCE Cluster

Bars are now available with 5H and 6H ratings.

CHANCE 5H and 6H Rated Cluster Bars are also available with an integral pole-penetrating option. See OSHA

1910.269 Appendix C for more information on protecting workers from hazardous differences in electrical potential

and penetration of the pole.

Cluster Bar with penetrating feature

CHANCE Lineman Grade Tools | Hubbell Power Systems, Inc. | hubbellpowersystems.com

©Copyright 2017 Hubbell Incorporated. Because Hubbell has a policy of continuous product

improvement, we reserve the right to change design and specifications without notice.

SF_09_124E

CATALOG NUMBER

DESCRIPTIONASTM

F855-15RATING

RATEDCURRENT

(15 CYCLES)

FIRST CYCLE TEST

CURRENT PEAK

WEIGHT

PSC6003628 5H Rated Cluster Bar, 5/8” dia. x 11”5H 47 kA 127 kA

10.7 lbs. (4.9 kg)

PSC6003628A 5H Rated Penetrating Cluster Bar, 5/8” dia. 10.8 lbs. (4.9 kg)

PST6003466 6H Rated Cluster Bar, 1” dia. x 11”6H 55 kA 148 kA

12.0 lbs. (5.4 kg)

PST6003466A 6H Rated Penetrating Cluster Bar, 1” dia. 12.1 lbs. (5.5 kg)

ABS POLE COVERSNEW CLASS 4 ABS SELECTION

CATALOG NO. DIAMETER LENGTH

PSC4060699 9in. (22.9cm) 72in. (182.9cm)

PSC4060700 9in. (22.9cm) 48in. (121.9cm)

PSC4060701 9in. (22.9cm) 36in. (91.4cm)

PSC4060702 9in. (22.9cm) 24in. (61.0cm)

PSC4060703 9in. (22.9cm) 12in. (30.5cm)

PSC4060704 12in. (30.5cm) 72in. (182.9cm)

PSC4060705 12in. (30.5cm) 48in. (121.9cm)

PSC4060706 12in. (30.5cm) 24in. (61.0cm)

PSC4060707 12in. (30.5cm) 12in. (30.5cm)

CHANCE® Lineman Grade Tools™ | Hubbell Power Systems, Inc. | hubbellpowersystems.com

©Copyright 2016 Hubbell Incorporated. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.

Printed in the U.S.A. | SF_09_112 E

FEATURES AND APPLICATIONS • Meets or exceeds ASTM F712• Class 4 (36.6kV Covered Phase-to-Covered Phase)• Protection from accidental brush contact with energized

components during pole removal/installation and other line maintenance

• Made of ABS plastic• Covers can be joined by overlapping impressions

CHANCE® BLANKET CLAMPSNEW IN-LINE GRIP-ALL BLANKET CLAMP

FEATURES AND APPLICATIONS• Blanket clamp for in-line use with a grip-all clamp stick• Maximum opening of 2.0 inches (51mm)• For use with rubber blankets and cover up

CATALOG NUMBER• PSC4060676

Hubbell Power Systems, Inc. | hubbellpowersystems.com


Printed in the U.S.A. | SF_09_121E

MULTI-RANGEVOLTAGE INDICATOR (MRVI)WITH BLUETOOTH® CONNECTIVITY FOR DISPLAY ON MOBILE DEVICE

Chance® Lineman Grade Tools™ introduces the Multi-Range Voltage Indicator (MRVI), used to determine

if power lines are at rated voltage, have induced voltage or are de-energized. Must be used with properly

selected universal hot stick, even with rubber gloves.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hubbell Power Systems, Inc. is under license. Other trademarks and trade names are those of their respective owners.

Mobile App Display

FEATURES & BENEFITS• Visible voltage indicator with range from Capacitive Test

Point up to 80kV Phase-to-Phase

• Bluetooth connectivity to view MRVI display live on a

mobile device

• Large, easy-to-read dial face and brightly illuminated

pointer indicate the voltage class.

• The class displayed is the approximate phase-to-phase

and phase-to-ground voltage classes

• Can be used on overhead and underground lines with

proper adapters

• Equipped with hold feature

• Battery Drawer for easy battery replacement with Lithium

or Alkaline AA batteries

• Comes with storage bag designed to attach to line

worker’s belt

• Lightweight, 1.25 lbs versus the 2.5 lbs. of the MRVD,

C4030979

OPTIONAL FIELD TESTER• The Multi-Range Voltage Indicator can be field tested

with the Voltage Indicator Tester PSC4033582


©Copyright 2016 Hubbell Incorporated. Because Hubbell has a policy of continuous product

improvement, we reserve the right to change design and specifications without notice.


PART NUMBER DESCRIPTION WEIGHT

PSC4033710 Multi-Range Voltage Indicator 1-1/4 lbs.

©2016 Hubbell Incorporated | [email protected] | hubbellpowersystems.com

PROXIMITY VOLTAGEINDICATOR (PVI)

Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications

600V TO 500KV - AUDIBILE & VISIBLE INDICATORS

FEATURES & APPLICATIONS

OPTIONAL FIELD TESTER

SF_09_090_E

• Bright display lights and audible alarm indicate voltage class

without need to directly contact the conductor

• Used to determine if power lines are at rated voltage, have

induced voltage or are de-energized

• Designed to be held 6 to 18 inches away from conductor being

tested for presence of voltage

• As the voltage field intensity increases, the Proximity “SENSE”

LED, Range LED and audible alarm will flash and beep faster

• Advanced feature allows user to temporarily disable range

indications for voltages below the user selected range

• New battery drawer does not require removal of front panel for

replacement of batteries

• Comes with storage bag designed to attach to line worker’s belt

or use during storage

• Lightweight, 1.25lbs versus the 4.75lbs of the Super Tester

• The proximity voltage indicator can be field tested with the

Voltage Indicator Tester PSC4033582 seen below

CATALOG NO. DESCRIPTION WEIGHT

PSC4033737 Proximity Voltage Indicator and Bag 1-1/4 lbs.

®


FALL RESTRAINT BRACKET

Provides insulation/Isolation from differences in potential by means of the 6” Epoxiglas linkMeets 5,000 lb. requirement as specified by OSHA 1910.66 App C personal fall arrest requirements

• Ratchet system with 48” nylon strap allows for quick and easy attachment to up to 18” dia. pole

• Swivel attachment head provides easy attachment to lanyard


PSC4021489 PERSONAL FALL RESTRAINT BRACKET 10 LBS. (4.5 KG)

CROSSARMLINK STICK


NOW AVAILABLE WITH 3500 LB-RATED WORKING LOAD

• Quick and easy set up, no sling necessary

• Plastisol-coated steel hook

• Fits standard 3-3/4" x 4-3/4" crossarms with 5" hook

• Galvanized steel swivel eye on conductor end for easy alignment

• Lifting eye on hook fitting for easy positioning by a hot line tool

• Also available with 1500 lb-rated working load

• Insulated Epoxiglas® length: 21.5"; total length: 41"

• Custom Epoxiglas lengths available

Pictured with Nylon-Strap Ratchet Hoist and Hot Line Wire Grips

Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications.

SF09024E

CATALOG NO.

PSC4004132

PSC4004372

WEIGHT

7.0 lbs.

8.0 lbs.

DESCRIPTION

Crossarm Link Stick - 1500 lb

Crossarm Link Stick - 3500 lb


PORTABLELOAD BREAK TOOL


FEATURES

SF_09_060_E

• Easy reset grip, will not pinch and is easy to use with gloves

• Lightweight design

• Packaged in a padded hard plastic carrying case

• Operation counter

• Nominal Rating 14.4/25kV. Max. Design Rating 27kV

• No exposed springs to damage Linemen’s gloves

The Chance® Portable Load Break Tool opens circuits under load

when used with cutouts, disconnect switches, capacitor banks, fuse

limiters, and power fuses.

CATALOG NO. DESCRIPTION kV NOMINALkV MAX.

DESIGN

NOMINAL AMP

INTERRUPTION

MAX. AMP

INTERRUPTIONWEIGHT

PSCLBT27 Chance Load Break Tool 27kV 900 Amps 14.4 / 25 kV 27 kV 600 Amps 900 Amps 4.65 lbs

®


IMPACTDISCONNECT STICK


FOR OPENING AND CLOSING DISCONNECT SWITCHESFEATURES

SF_09_069_E

• Uses a slide-hammer mechanism to provide additional force for

opening Disconnect Switches

• Poles are made of 1-1/4” diameter Epoxiglas® meeting ASTM F711

and IEC 60855 standards

• Heavy Duty Disconnect heads of bronze alloy• Available in complete sticks, spliced sticks, and conversion kits

• Perfect for opening Switches in iced over conditions

CATALOG NO. DESCRIPTION

PST4033750

PST4033751

PST4033752

PST4033753

PST4033709

PSC4033741

PSC4033747

Impact Disconnect Stick 6’ Clear Glass 8’11” Overall Length




Spliced Impact Disconnect Stick 9’8” Clear Glass 13’2” Overall Length

Impact Disconnect Tool Retrofit Kit 27.5” Overall Length for 1-1/4” Diameter Poles

Impact Disconnect Tool bottom with Female Splice 38” Overall Length

®


RESCUEHOOK


NEW SAFETY TOOL

FEATURES


SF_09_044_E

• Handle meets ASTM F711 and IEC 60855 specifications

• 3/4” high strength steel hook with 18” diameter and coated with

black paint

• Hook mounted on a 1-1/4” diameter Epoxiglas® pole

• Available in 6’ and 8’ handle lengths

PSC4033703

PSC4033704

6’ Rescue Hook

8’ Rescue Hook

7.25 lb. / 3.29 kg.

8.00 lb. / 3.63 kg.

FOR REMOVING INJURED PERSONNELIN AN EMERGENCY SITUATION

®

CROSSARM CHANGE-OUT ASSIST TOOL• The Crossarm Change-out Assist Tool (CCAT) provides a temporary support for crossarms during change-out on H-frame structures.

• Facilitates removal and lowering of crossarm.

• For best results use two CCATs – one on each H-frame pole.

• Working load rating of 1,000 lbs.

Ratchet system with 48” nylon strap allows for quick and easy attachment on poles up to 18” dia.

After removing DA Bolt, CCAT supports crossarm and facilitates movement into position to be lowered or installed.

CATALOG NO. DESCRIPTION WEIGHTPSC4012901 Crossarm Change-out Assist Tool 11.7 lbs. (5.3 kg)





DA BOLT PULLER


EASILY REMOVE DA AND OTHER BOLTS

FEATURES AND BENEFITS

SF_09_096_E

• Uses 5 lb. impact hammer for easy removal of

bolt sizes 5/8” – 7/8”

• Great for extracting bent, tight, and stuck bolts

• Safer and easier than driving bolt with a

hammer and drift pin

• Eye screw for easy handline attachment

After capturing exposed DA Bolt end, pull back firmly on hammer to provide the impact force necessary to remove lodged bolt.


PSC4012783 DA Bolt Puller with Impact Hammer 24” for 5/8” - 7/8” bolts 10.0 lbs (3.7 kg)


SHEAVE ADAPTERSADJUSTABLE


FOR EASY ADJUSTMENT OF INSULATED DISTANCE BETWEEN WIREHOLDER AND SHEAVEFEATURES

SF_09_086_E

• Optimize distance between wireholder and sheave while maintaining proper insulated distance

• Adjustable Sheave Adapter easily moves between holes in 3” Jib (T4001525)

• Allows for use of wireholder and sheave at the same time

• Accommodates existing accessories shown and more

• Working load of 800 lbs.

CATALOG NO. WEIGHT DESCRIPTION

PSC4004300

PSC4004301

9.5 lbs (3.6 kg)

15.6 lbs (5.8 kg)

C4000747

Roller Wireholder

w/ Swivel Ferrule

C4001669

Roller Wireholder

P4001594P

3” Round Jib

Adapter

4” x 4”Truck Jib

T4001525

3” Dia. Jib

P4002450P

Ball T Pin

(ordered

separately)PSC4004300 PSC4004301

Adjustable Sheave Adapter to fit 3” Dia. Round Jib

Adjustable Sheave Adapter to fit 4”x 4” Square Jib

®


22” X 22” SLOTTED BLANKETS


NEW RUBBER BLANKET SELECTION

FEATURES AND APPLICATIONS:

CATALOG NUMBER

SF_09_101_E

• Meets or exceeds ASTM Standard Specification D1048

• Class 2 Type II (ozone-resistant)

• Protection from accidental brush contact with

energized components during line maintenance

• Made of ozone/corona-resistant elastomer

• Special formulation exhibits superior resistance to long-

term aging/checking

• Standard package quantity is 12

• 1.5 inch (38 mm) diameter center hole

• 12 eyelets

• PSC4060708

CLASS 2 TYPE II

®


22” X 22” BLANKETS


NEW RUBBER BLANKET SELECTION


CATALOG NUMBER

SF_09_059_E

• Meets ASTM Standard Specification D1048

• For Class 4 Type II (ozone-resistant)

• Protection from accidental brush contact with

energized components during line maintenance

• Made of ozone/corona-resistant elastomer

• Special formulation exhibits superior resistance to

long-term aging/checking

• Standard package quantity is 12

• 28 eyelets

• PSC13

CLASS 4 TYPE II

®


CONDUCTOR COVERCLASS 2 TEMPORARY


15KV GUARDED PHASE-TO-GUARDED PHASE

FEATURES AND APPLICATIONS

SF_09_078_E

• Lightweight - 50% the weight of similar rubber hose

• Rated 8.4kV phase to ground / 15kV guarded phase to

guarded phase. (Brush contact only)

• Meets ASTM F712 Class 2

• Available in 5 or 6 ft models

• High visibility orange color

• Secure locking feature / male and female connecting ends

• Larger ID than traditional class 2 rubber hoses (1.75 in.

compared to 1.25 in.)


PSC4060616

PSC4060617

5’ Class 2 Conductor Cover

6’ Class 2 Conductor Cover

1.7 lb. / 0.77 kg.

2.0 lb. / 0.90 kg.

®

Cover will couple with major brands of

rubber line hose and insulator covers.


CUTOUT COVERS


NEW FLEXIBLE RUBBER SELECTION


CATALOG NUMBER

SF_09_042_E

• For use on Overhead Cutouts

• Conforms to ASTM D1049

• Dimensions of 24” x 15” x 3.75”

• PSC24CC

CLASS 2 TYPE II RUBBER COVER

®


OVERHEADSWITCH BARRIER


COVER ALL THREE PHASES

FEATURES

SF_09_050_E

• Designed to fit 12kV or 25kV disconnect switches

• Compatible with 30” and 36” spacing

• Puncture Strength - 300 V/mil (approx .25 in thickness)

• Provided with Gripall adapters (2 positions)

• High visibility orange color

• Provided with yellow vinyl bag

• Available as individual item or 2 per kit

The Barrier Board is designed to cover all three phases of a 12kV

or 25kV horizontal disconnect switch in a substation. The Barrier

Board acts as a physical barrier between the open switch and the

bus. It lifts easily with shotgun sticks for proper placement. The

barrier covers the lower blade portion of the disconnect switch so

that work can be performed on the bottom side of the switch.

CATALOG NO.

PSC4060648

PSC4060651

PSC4060650

DESCRIPTION

Board Barrier

Kit (2 Barriers and Bag)

Bag

DIMENSIONS

84” x 19” x 5”

84” x 19” x 5”

86” with handles

WEIGHT

17 lb. / 7.7 kg.

35 lb. / 15.9

1 lb. / .45kg

5

Catalog Number T6000819 C6001783 C6000085 C6000197

T6003011(threaded)T6000658

(drilled)

C6002256(threaded)

PSC6003412(drilled)

Continuous Current (Amps) 400 400 400 400 400 400

Fault Current 15 cycles

Recommended Torque (in-lb) 300 300 250 250 250 250

Main Line Range Maximum

4” x 4”Square4.5” O.D.

Bus

3⁄4” x 5” Angles or

Flatsor 5⁄8” O.D.

Rod

4” Structural Angles

950 kcmil Cu.

1510 kcmil ACSR

2” O.D Bus 2” O.D Bus

Main Line Range Minimum 4/0 Str. Cu. (0.500)

1⁄8 in. 2” Structural Angles

#6 Solid Cu.(0.162)

#6 Solid Cu.(0.162)

#6 Solid Cu.(0.162)

Ground Cable Required for 5H N/A 4/0 4/0 4/0 4/0 4/0

Weight 51⁄4 lb.(2.4 kg)

5 lb.(2.25 kg)

33⁄4 lb.(1.7 kg)

11⁄2 lb.(0.7 kg)

13⁄4 lb.(0.8 kg)

13⁄4 lb.(0.8 kg)

ASTM DesignationType IClass A

Grade 5H

Type IIIClass B

Grade 5H

Type IIIClass B

Grade 5H

Type IClass B

Grade 5H

Type IClass A

Grade 5H

Type IClass B

Grade 5H

C6000197

T6000819 C6001783

C6000085Clamp

Chance® 5H Rated Ground Sets are engineered, assembled and tested per ASTM F855.They consist of Chance components and are produced by a proven and tested manufacturing process.Hubbell Power Systems, Inc. cannot certify that ground sets otherwised produced meet ASTM 5H requirements.

C6001584Conversion Terminal

for Threaded StudMust be combined to

achieve 5H rating

5

47 kA Current Rating 127 kA Peak Current First Cycle X/R = 30 X 2.69 70 kA

Peak Current Last Cycle

T6000658Drilled Ferrule HoleT6003011Threaded Ferrule Hole

C6002256Threaded Ferrule HolePSC6003412Drilled Ferrule Hole

Grade 5H Rated

• Rated 47kA with X/R = 30 • First cycle current peak = 127 kA • Last cycle current peak = 70 kA • Test duration = 15 cycles

Designed and Tested to meet requirements of ASTM F855Table 2 – Ultimate Assembly Rating for High X/R Ratio Applications

• System components - Ball Stud Clamp which accepts 30 mm Ball Studs (including Long and Short Ball Studs with 5/8-11 UNC threads or Short Ball Stud with 5/8-11 female threads) to meet demands of higher electromechancical forces. All components must be used with 5H rated ground sets to maintain the 5H Rating.

Short Ball Stud30 mm Ball5/8-11 UNC ThreadsCatalog No. PSC6003491

Long Ball Stud30 mm Ball5/8-11 UNC ThreadsCatalog No. PSC6003492

Short Ball Stud30 mm Ball5/8-11 UNC Female ThreadsCatalog No. PSC6003493

Short Ball Stud CoverCatalog No. PSC4060615Not an insulated cover

4 Hole NEMA Pad Adapter with permanent short Ball StudGrade 5H RatedCatalog No. PSC6003510

Ball Stud Ground Clampaccepts 30 mm Ball StudsGrade 5H RatedCatalog No. PSC6003494

5 H B A L L S T U D G R O U N D I N G

®

6®

POLEPROTECTOR


®

FOR CONCRETE, FIBERGLASS, STEEL POLESNEW SURFACE GUARD

PROTECTIVE COVER FOR MOUNTING CHAIN-BINDER TOOLS:

• Simple installation for quick attachment of bases for ladders, platforms, conductor supports, auxilliary arms, pole tongs, etc.

• Tough material protects pole without reducing tool's load rating

• Not for mounting capstan hoists or any application that loads chain binder in an upward direction

• Not insulating cover up equipment

Hubbell has a policy of continous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications.

SF_09_010_E


SF09025E

Catalog No. Protector Size Max. Pole Diameter

PSC4060624 7 in. x 4 ft. up to 15"

PSC4060625 7 in. x 5 ft. up to 19"PSC4060626 7 in. x 6 ft. up to 23"PSC4060627 7 in. x 7 ft. up to 27"

ORDERING INFORMATION


NEW TWO COLOR SELECTIONBLACK UNDER YELLOW ADDITION COMPLETES OUR FULL

LINE OF LOW-VOLTAGE OFFERINGS:

• Now available in

Black under Yellow

Red

Yellow

Black

• Lengths of 11" and 14" (Black under Yellow in 14" only)

• Straight cuff style

• Type I, ASTM Class 00, 0 (Black under Yellow Class 0 only)

FEATURES & APPLICATIONS:

LOW-VOLTAGERUBBER GLOVES

• The ultimate source of protection expected from the Chance name

• Offers a new level of comfort and flexibility

• Constructed for high dielectric and physical strength

• Exceed ASTM D120


SF_09_036_E


Class 00 Class 0

Size 11” 11” 14”7 PSC0011R7 PSC011R7 PSC014R7

8 PSC0011R8 PSC011R8 PSC014R8

8.5 PSC0011R8H PSC011R8H PSC014R8H

9 PSC0011R9 PSC011R9 PSC014R9


10 PSC0011R10 PSC011R10 PSC014R10


11 PSC0011R11 PSC011R11 PSC014R11

12 PSC0011R12 PSC011R12 PSC014R12

Class 00 Class 0

Size 11” 14” 11” 14”7 PSC0011Y7 PSC0014Y7 PSC011Y7 PSC014Y7

8 PSC0011Y8 PSC0014Y8 PSC011Y8 PSC014Y8

8.5 PSC0011Y8H PSC0014Y8H PSC011Y8H PSC014Y8H







Class 00 Class 0

Size 11” 14” 11” 14”7 PSC0011B7 PSC0014B7 PSC011B7 PSC014B7

8 PSC0011B8 PSC0014B8 PSC011B8 PSC014B8

8.5 PSC0011B8H PSC0014B8H PSC011B8H PSC014B8H







Class 0

Size 14”7 PSC014BY7

8 PSC014BY8

8.5 PSC014BY8H

9 PSC014BY9

9.5 PSC014BY9H

10 PSC014BY10

10.5 PSC014BY10H

11 PSC014BY11

12 PSC014BY12

Red Low-Voltage Rubber Gloves

Yellow Low-Voltage Rubber Gloves

Black Low-Voltage Rubber Gloves

Black under Yellow Low-Voltage Rubber Gloves

Documents

CHANCE NEW ADDITIONS - · PDF fileCHANCE® NEW ADDITIONS. hubbellpowersystems.com 22” x 22” Blankets Lightweight Conductor ... and IEC 60855 standards • Heavy Duty