CFS Stone Support and Restraint

7/28/2019 CFS Stone Support and Restraint

1/9

Stone Support andRestraint Systems


2/9

However, the company is forever pushing to develop newproducts to meet the needs of an ever-changing industry.Product quality is also key to CFS continued success, whichis why the company is proud to be ISO 9001 certied.

Testing and technical support

CFS is a member of the LEEA Association (LiftingEquipment Engineers Association) and fully understandsthe importance of on-site testing for both safety reasonsand for peace of mind. CFS can also provide rapidtechnical backup for the many products provided, whilefull AutoCAD drawing services are available. Furthermore,CFS has the services of qualied engineers to assist with allprojects and carries professional indemnity.

Recent CFS projects include:

Castle Quay Development - Jersey Water Front; Basinghall

Avenue - London; Gloucester Quays St. Ann Way;Charles Le Quesne Seaton Place, St. Hellier.

Quality, innovation, support

These three words are at the heart of everything CFSprovides to the cast stone industry, and remain as truetoday as when the business was rst founded back in2000 by Tim Chart.

The goal of CFS is simple: provide an enhanced level ofservice within the existing market, while always delivercost-effective, technically brilliant solutions that resolveany application problem. Making this goal a reality is onlypossible through the drive, passion and commitment ofthe whole CFS team, who for over a decade have held theCompanys philosophy true:

Analysis Discussion Action Result

Quality products you can trust

Ideally suited to concrete, steel or composite structures,the highly innovative CFS product range includes productsfor the support and restraint of stone cladding, such asstandard bearing brackets, fabricated load barriers andbolting frames.

A brief introduction to CFS

Contents

www.csfxings.com 2

2

3-6

6-8

9-10

11-12

12

13

14

Systems for Thin Stone CladdingMarble and Granite

Systems For Thin Stone Cladding Marble and Granite

Fixing systems accommodate all types of backing wallswhether they are concrete walls, block work & masonrywalls or steel structures.

The following points need to be taken into considerationwhen designing a xing system for natural stone installation.

Stone dimensions.

Cavity structure; projection size and isolation.

Application type; horizontal or vertical joint installation.

Joint size.

Structural wall backing.

Height of facade.

Relevant dynamic loads such as wind and sesimic loads.

Design criteria of the project.

CFS proposes and specially designs xing systemsaccording to each projects requirements.

Direct fxing toconcrete walls:

Fixing to concrete withbolt anchors usingexpansion bolts.

F2/F3 Anchor Fixing System

Fixing to concrete with bolts

Projection sizes up to 135mm

Recommended for loads up to 800 N

Installation at horizontal andvertical joints

Three dimensional adjustability

F4 / F5 / F6 Body Anchor Fixing System

Fixing to concrete with bolts

Projection sizes up to 260mm

Recommended for loads up to 1300 N

Optimum static perfomance


CFS is known as a high quality and reliable source for the design and supplyof xing systems in the construction industry. Major projects have beensuccessfully supplied with scher xing systems. The main advantage of CFSis the ability to custom design xing systems and provide fast production tomeet the time restraints of the projects. The design and supply is made inaccordance with international standards and most of all with the expectationsof our clients.

F2 Anchors used to install slabson to concrete walls.

F4 Anchors used to install slabson to blockwork walls.

Natural Stone Fixing Systems

F2

F4

F2 / F3 Anchor Support andRestraint Systems

F4 / F5 / F6 Body Anchor Supportand Restraint Systems

F5 / F6 Body Anchors

Grout in Systems for RestrainingGranite and Marble Cladding

Systems for Thick Stone Claddinge.g.Portland

Flush Support Anchor for Marbleand Granite (FZP)

Drilling Technology & Supportframe Systems

F3

F6

F5


3/9

www.csfxings.com 4www.csfxings.com

Direct xing in to concrete walls with expansion bolts.Indirect xing on to sub channel system with hex bolts.

Three dimensional adjustability - Quick and easy xing.

Installation at horizontal and vertical joints.

Recommended projection sizes up to 135 mm & loadsup to 800 N.

F2 / F3 Anchor Support and Restraint Systems

Load Bearing &Restraint

F dw /2 F dw /2

Suitable for concrete walls. Anchors are xed directly onto concrete walls with expansion bolts.

Recommended projection size between 45 mm to135 mm and loads up to 800 N.

In horizontal joint installation slabs are pinned on thebottom and upper sides. Anchors act as load bearingcarrying half the weight of the slabs above. Anchorsalso act as restraints, holding the slabs below andrestraining against wind suction and pressure.

In vertical joint installation slabs are pinned at the leftand right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab.Half the weight of the slab on the left and half theweight of the slab on the right. Anchors on the topare restraint anchors holding the slabs and restrainingagainst wind suction and pressure.

Three - dimensional adjustability allows quick andeasy installation.

The design and structural calculations of these anchorsare made in our technical department. Special design

and manufacturing can be made for the requirementsof each project.


10mm

1) Vertical adjustmentis enabled through theslot hole. The anchor isxed on to the bolt withthe serrated washer at

the desired level.

15mm

15 15

2) Adjusting theprojection size isenabled by rotatingthe adjustable arm.The adjustable arm

is locked with thehex.nut.

3) Adjusting theanchor left andright is enabled bysliding the body 15degrees side-ways.

Installation at horizontal joints Installation at vertical joints

Restraint Load Bearing

F dw /1 F dw /1

F2 Support Anchor

F2 - 45 2 -A4 -A

Steel Type

Load Capacity (x10 Kg)

Projection (K mm)

Type

l

ll ll l

ll .

Shape

Technical Details

TFws/Fwp

M

P

F

EAL

Cement Grout

Plastic Tube

Load Bearing

Restraining

St

K

Fdw

Drilled hole may berequired for closelyspaced walls.

St=20-50 mm

For anchoring intoconcrete B 25

B

Material : StainlessSteel 1.4401 (A4).

Table below isprepared accordingto DIN 18516

standard.

ProductCode

ProjectionMin

Projection

Max

Projection

Dead

LoadOffset

Wind

Pressure

Wind

SuctionBolt Size

Pin

diameter

Adj arm

metric

Adj arm

at. thick.

Adj arm

length

K (mm)K min.(mm)

K max.(mm)

Fdw (N) F (mm) F wp (N) F ws (N) B P (mm) M T (mm) EAL (mm)

F2-452-A4 45 40 60

200

10

312 219 M8 5 M10 3,5

50

F2-552-A4 55 50 70 20 60

F2-752-A4 75 60 90 40 70

F2-952-A4 95 80 110 60 70

F2-553-A4 55 50 70

300

20

468 328 M8 5 M10 3,5

60

F2-753-A4 75 60 90 40 70

F2-953-A4 95 80 110 60 70

F2-1153-A4 115 100 130 80 70

F2-554-A4 55 45 70

400

10

624 437 M8 5 M12 4

60

F2-754-A4 75 60 90 20 70

F2-954-A4 95 80 110 40 80

F2-1154-A4 115 100 130 60 80

F2-755-A4 75 60 90

500

20

780 546 M8 5 M12 4

70

F2-955-A4 95 80 110 40 80

F2-1155-A4 115 100 130 60 80

F2-1355-A4 135 120 150 80 80

F2-756-A4 75 60 90

600

20

936 655 M10 6 M14 5,5

70

F2-956-A4 95 80 110 40 80

F2-1156-A4 115 100 130 60 80

F2-1356-A4 135 120 150 80 80

F2-758-A4 75 60 90

800

20

1235 865 M10 6 M14 5,5

70

F2-958-A4 95 80 110 40 80F2-1158-A4 115 100 130 60 80

F2-1358-A4 135 120 150 80 80

F2 Anchor A load bearing anchor. It can be used to install heavier loads at larger projection sizes at horizontal and vertical joints.

Other sizes are available for production upon request. Bolts are provided separately. Stainless Steel 1.4301 (A2) upon request.

auf Anfrage:Product Code Description Shape A Shape B Shape C Shape D

F2 Anchor F3 Restraint anchor


4/9

www.csfxings.com 6

F2 / F3 Anchor Fixing Systems

I

F dw /1 F dw/1

Installation at vertical joints

Restraint

LoadBearing

In this instance the dead load of the slabis divided by two, as half the weight ofthe slab is transferred to the load bearinganchors.

In this instance the dead load of theslab is divided by one, as the wholeweight of the slab is transferred to theload bearing anchors.

F dw/2 F dw/2

Installation at horizontal joints

Load Bearing

& Restraint

I

Installation details

F3 Restraint Anchor

Technical Details

Type

ProjectionMin

Projection

Max

ProjectionOffset

Wind

Pressure

Wind

SuctionBolt Size

Pin

diameter

Adj arm

thread

Adj arm

at. thick.

Adj arm

length

K (mm)K min.(mm)

K max.(mm)

F (mm) F wp (N) F ws (N) B P (mm) M T (mm) EAL (mm)

F3-4510-A4 45 43 60 10

490 350 M8 5 M8 3

50

F3-5510-A4 55 53 70 20 60

F3-7510-A4 75 63 90 40 70F3-9510-A4 95 80 110 60 70

F3-11510-A4 115 100 130 60 90

F3-5520-A4 55 53 70 20

980 700 M8 5 M8 3

60

F3-7520-A4 75 63 90 40 70

F3-9520-A4 95 80 110 60 70

F3-11520-A4 115 100 130 60 90

Direct xing in to concrete walls with expansion bolts.Indirect xing on to sub channel systems with hex bolts.

Three dimensional adjustability - Quick and easy xing.

Installation at horizontal and vertical joints.

F4 / F5 / F6 Body Anchor Support and Restraint Systems Optimum static performance and low engineering for

higher loads and larger projection sizes.

Recommended projection sizes up to 260 mm andloads up to 1300 N.

11mm

F4 Support Anchor F5 Support Anchor F6 Restraint AnchorThree dimensional adjustability

1) Vertical adjustment is enabledthrough the body space. The anchoris xed onto the bolt through thewedge washer and the lock washerat the desired level.

2) Adjusting the projection size bysimply moving the adjustable armwithout rotating. The adjustable armis safely xed to the anchor bodywith the lock nut and hex bolt.

3) Adjusting the anchor left andright by sliding the body 15 degreesleft or right.

15mm

Material:

Stainless Steel 1.4401 (A4)

table below is preparedaccording to DIN 18516

SECTION A-A

1. Through bolt2. Anchor body3. Serrated washer4. Round washer5. Hex nut for through bolt6. Hex nut for adjustable arm7. Adjustable arm8. Plastic tube9. Flanged pin

A

Adjustable

arm variations

SHAPE A

SHAPE B

A

Isolation

Wall

Anchor set

Stone slab

Section through anchor

8

7

6

2

1

34

5

9


5/9

www.csfxings.com 8

Load Bearing &Restraint

F dw /2 F dw /2

Suitable for concrete walls. Anchors are xed on toconcrete walls with expansion bolts.

Projection sizes between 60 and 260 mm and loads upto 1300 N.

In horizontal installation, slabs are pinned on thebottom and upper sides. The anchors act as loadbearing, carrying half the weight of the slabs above.Anchors also act as restraint holding the slabs belowand restraining against wind suction and pressure.

In vertical installation, slabs are pinned at the left andright sides. The anchors on the bottom are load-bearing

Installation at horizontal joints Installation at vertical joints

Restraint Load Bearing

F dw /1 F dw /1

anchors carrying the whole weight of the slab. Half theweight of the slab on the left and half the weight of theslab on the right. The anchors on the top are restraintanchors holding the slabs and restraining against windsuction and pressure.

Three dimensional adjustability allows quick andeasy installation.

The design and structural calculations of these anchorsare made in our technical department. Special designand manufacturing can be made for the requirementsof the project.

F4 / F5 / F6 Body Anchor Fixing SystemsInstallation details

Fdw/2 Fdw/2

Installation at horizontal joints;

Load Bearing& Restraint

I

In this instance the dead load of theslab is divided by two, as half theweight of the slab is transferred to theload bearing anchors.

In this instance the dead load of theslab is divided by one, as the wholeweight of the slab is transferred to theload bearing anchors.

1) Through bolt2) Wedge washer3) Anchor body4) Lock washer5) Round washer for through bolt6) Hex nut for through bolt

I

Fdw /1 Fdw/1

Installation at vertical joints;

Restraint

LoadBearing

F4 / F5 / F6 Body Anchor Fixing Systems

F4 Support AnchorF4 Body Anchor Technical Details

Product

Code

ProjectionMin

Projection

Max

ProjectionDead Load Offset

Wind

Pressure

Wind

SuctionBolt Size

Pin

diameter

Adj arm

metric

Adj arm

at. thick.

Adj arm

length

K (mm)K min.(mm)

K max.(mm)


F4-609-A4 60 48 72 900 28 1100 770

M8 5 M12 4

60

F4-858-A4 85 67 103 800 46 700 700 75

F4-1207-A4 120 95 145 700 75 650 650 85

F4-1607 160 135 185 700 115 600 600 85

F4-705-A4 70 50 90500

20780 546 M8 5 M12 4 85

F4-1105-A4 110 90 130 60

F4-7013-A4 70 50 901300

202028 1419 M10 6 M16 6 85

F4-11013-A4 110 90 130 60

F4-1505-A4 150 130 170 500 100 780 546 M8 5 M12 485

F4-15013-A4 150 130 170 1300 100 2028 1419 M10 6 M16 6

T

95

7) Locking plate8) Hex bolt9) Adjustable arm10) Plastic tube11) Flanged pin

SECTION A-A

A

A

Isolation

Wall

Anchor set

Stone slab

Section through anchor

Adjustable

arm variations

10

78

3

1

2

4

56

11

9

SHAPE B

SHAPE A


6/9

www.csfxings.com www.csfxings.com 10

F6 Restraint Anchor Technical Details

ProductCode

ProjectionMin

Projection

Max

ProjectionOffset

Wind

Pressure

Wind

SuctionBolt Size

Pin

diameter

Adj arm

metric

Adj arm

at. thick.

Adj arm

length

K (mm)K min.(mm)

K max.(mm)

F (mm) F wp (N) F ws (N) B P (mm) M T (mm) EAL (mm)

F6-6020-A4 60 40 8025

2028 1419 M8 5 M8 3

65

F6-8020-A4 80 60 100 85

F6-10020-A4 100 80 120

32

100

F6-12020-A4 120 100 140 120

F6-14020-A4 140 120 160 140

F6-16020-A4 160 140 180 160

F6-18020-A4 180 160 200

40

170

F6-20020-A4 200 180 220 190

F6-22020-A4 220 200 240 210

F6-24020-A4 240 220 260

50

220

F6-26020-A4 260 240 280 240

Material : Stainless Steel 1.4401 (A4). Technical details are prepared according to DIN 18516 standard.

Other sizes are available for production upon request.

Bolts are provided separately.

Stainless Steel 1.4301 (A2) upon request.

F6 Restraint AnchorF5 Support Anchor

F5 - 160 5 -A4 -A

Steel Type

Load Capacity (x10 Kg)

Projection (K mm)

Type

Shape

Technical Details

Cement Grout

Plastic Tube

Load Bearing

Restraint

Fws/FwpM

EAL

F

P

Fdw

K

mm05-02=tStS

T

x

For anchoring intoconcrete B 25

B

Material : Stainless Steel 1.4401 (A4).

Table below is prepared according toDIN 18516 standard.

Product

Code

ProjectionMin

Projection

Max

ProjectionDead Load Offset

Wind

Pressure

Wind

SuctionBolt Size

Pin

diameter

Adj arm

metric

Adj arm

at. thick.

Adj arm

length

K (mm)K min.(mm)

K max.(mm)


F5-1605-A4 160 140 180

500

115

780 546 M8 5 M12 4 100

F5-1805-A4 180 160 200 135

F5-2005-A4 200 180 220 155

F5-2205-A4 220 200 240 175

F5-2405-A4 240 220 260 195

F5-2605-A4 260 240 280 215

F5-1609-A4 160 140 180

900

115

1430 1000 M10 6 M14 5,5 100

F5-1809-A4 180 160 200 135

F5-2009-A4 200 180 220 155

F5-2209-A4 220 200 240 175

F5-2409-A4 240 220 260 195

F5-2609-A4 260 240 280 215

F5-16013-A4 160 140 180

1300

115

2028 1419 M12 6 M16 6 100

F5-18013-A4 180 160 200 135

F5-20013-A4 200 180 220 155

F5-22013-A4 220 200 240 175

F5-24013-A4 240 220 260 195

F5-26013-A4 260 240 280 215

F5 Body Anchor The F5 Body anchor is a load bearing anchor and is adjustable in three dimensions. The F5 anchor is a secureand economic method of installing heavy slabs at large projection sizes at horizontal and vertical joints. This anchor carries loadsup to 1300 N at projection sizes up to 260 mm. The projection size is easily regulated by moving the adjustable arm withoutrotating. The adjustable arm is securely xed to the anchor body through the hex bolt and lock nut joints.

Other sizes are available for production upon request. Bolts are provided separately. Stainless Steel 1.4301 (A2) upon request.

auf Anfrage:Product Code Description Shape A Shape B Shape C Shape D

80

F

T

K

EAL


7/9


L1

L

Fws/Fwp

Cement Grout

Plastic Tube

Load Bearing

Restraining

T

Fdw

K

St St=20-50 mm

For mortaring into

concrete C20/25and Masonry M12/II.

Grout in Systems for Restraining

Granite and Marble CladdingHRD01 Mortar Anchor

Load bearing & restraint.

Projection sizes between35 and 75 mm.

Loads up to 400 N

Three dimensional adjustability.Suitable for horizontal joints.

Stone thicknesses 20-50 mm.

Fastened into concrete C20/25and Masonry M12/II.

Grout in anchorc/w dowel

Grout in Anchor Technical Details

HRD01- 35 1 A

Shape

Projection

Dead load (x10Kg)

Type

Grout in Anchor

Product

Code

ProjectionMin

Projection

Max

Projection

Dead

Load

Wind

Pressure

Wind

Suction

Anchor

Length

Dowel

Embedded

Length

Pin

Diameter

Bore

Diameter

Flat

Thickness

K (mm)K - min.(mm)

K + max.(mm)

F dw (N) F wp (N) F ws (N) L (mm) L 1 (mm) (mm) B (mm) T (mm)

GR D01-351 35 20 50

100 156 110

135

90 4

12 2.5

GR D01-451 45 30 60 145

14 3GR D01-551 55 40 70 155

GR D01-651 65 50 80 165

GR D01-751 75 60 90 175GR D01-352 35 20 50

200 312 219

135

90 4

14 3GR D01-452 45 30 60 145

GR D01-552 55 40 70 155

16 3.5GR D01-652 65 50 80 165

GR D01-752 75 60 90 175

GR D01-354 35 20 50

400 624 437

135

90 5 18 4

GR D01-454 45 30 60 145

GR D01-554 55 40 70 155

GR D01-654 65 50 80 165

GR D01-754 75 60 90 175

Systems for ThickStone Claddinge.g. PortlandCFS produces purpose made brackets for use assupports. These are designed to carry a storey heightof stonework with brackets typically spanning betweenadjacent stones.

CFS CFA support brackets

are manufactures to suityour project. We designthese from your projectinformation including thestone sizes, cavity widthand height. The bracketsare height adjustable andcan be drill xed or xedinto cast-in channels.

Grout in anchors can beeasily xed and can be usedin construction with FischerFIS V-360 Resin.

Product Code

CFS CFA support bracket

Restraint Cramps forThick Stone Claddinge.g. PortlandMulti Hole tie type CFS CFS MH

Produced to suit your projectincorporates 3 hours to allow forvariations on cavity width xedwith Fischer FBN M6 thru bolt for

concrete or Fischer M8 ResinAnchor for denseblock work.

Multi Hole tie type CFS A-CFS MH

Fixed with a grout in stud,to enable a wide variety ofcavity widths to be catered for.


8/9


Flush Support Anchor for Marble and Granite (FZP)

Article No. Description Hole Dia.

(mm)

Anchor Depth

(mm)

Thread Dia.

(mm)

Bolt Length

(mm)95980 FZP 11x12 M6/13 A4 11 12 M6 13

96311 FZP 11x12 M6/18 A4 11 12 M6 18

78830 FZP 11x15 M6/10 A4 11 15 M6 10

60708 FZP 11x15 M6/18 A4 11 15 M6 18

79824 FZP 13x15 M8/10 A4 13 15 M8 10

60709 FZP 13x15 M8/15 A4 13 15 M8 15

45188 FZP 13x15 M8/23 A4 13 15 M8 23

60707 FZP 13x15 M8/28 A4 13 15 M8 28

16913 FZP 13x20 M8/10 A4 13 20 M8 10

95815 FZP 13x20 M8/23 A4 13 20 M8 23

92736 FZP 13x15 M8W/23 A4 13 15 M8W* 23

79848 FZP 13x21 M8W/9 A4 13 21 M8W* 9

60717 FZP 13x21 M8W/17 A4 13 21 M8W* 17

45189 FZP 13x21 M8W/22 A4 13 21 M8W* 22

There are a wide range of anchorsavailable for ush installation intoboth hard and soft stone types.Flush anchors are suitable whena good tolerance on materialthickness can be guaranteed.

Drilling TechnologyFischer xings can supply a wide range of driling/setting machines to suit every project applicationfrom portable drilling equipment to factory based drilling machines with twin drill heads.

The drilling machines are available for purchase or rental. Fischer also provide on site trainingin the use of the machines.

Mobile Drilling Equipment BSN 100 or Natural Stone

Mobile drilling machine for to drill undercut holes intoNatural Stone panels for Fischer FZP-Anchors. Machineis designed for use at site for special panel sizes, ttingpieces and job lot production.

Drill Rig SBN 502 or Natural Stone and Ceramic

Stationary drilling machine for to drill undercut holesinto Natural Stone panels and Ceramic Tiles for FischerFZP-Anchors. Machine is designed for volume production.

CFS provides metal framing systems to give bothsupport and restraint. These typically span oor to ooror have intermediate restraints.

Materials used include stainless steel, aluminium and

galvanised mild steel. The choice will be dictated byyour project weathering requirements. CFS will designthe most cost effective system for your given wind anddead loads.

StructureEasy

Structure provides an alternative support solution to theFischer SystemOne framework. The system is particularlycost effective when the height of the faade panels isreduced. This enables sharing of horizontal componentsbetween faade panels. The system also has a hook onfeature for easy mounting of the faade panels.

*M8W denotes a xing suitable for soft stone groups.

Support Frame SystemsCFS oers several choices o support rame to suit the specifc needs o a project.


9/9

Construction Fixing Systems Limited

Unit 2, Westfeld Estate, Henley Road, Medmenham, Marlow, Buckinghamshire SL7 2TA. UKTelephone. +44 (0) 1491 576466Fax. +44 (0) 1491 578166

Email. [email protected]

Documents

CFS Stone Support and Restraint