OPERATING & MAINTENANCEINSTRUCTIONS

WOODEN WORKBENCH

MODEL: CHB1500Part No. 6500126

ASSEMBLY INSTRUCTIONS02/07

2 11

The Completed Workbench

ASSEMBLY

3

INTRODUCTION

Thank you for purchasing this CLARKE Wooden Workbench.

Please read these instructions carefully in order to ensure that the workbench isassembled correctly, thereby ensuring that it provides you with long and satisfactoryservice.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12 monthsfrom the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with inany way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returnedto us without prior permission.

This guarantee does not effect your statutory rights.

10

ASSEMBLY

Fit the pins and dogs asrequired.

KK

Fit the drawer and clampsas shown.

4

PACK CONTENTS

A

x2

x1

x1

x1

x2

x1

x1

x2

B

C

D

E

F

G

H

Side pieces

Left leg frame

Right leg frame

Shelf base

Drawer Holder

Workbench

Drawer Front

Drawer Side

9

DRAWER ASSEMBLY

1 2

3 4

1. Fit the rear of the drawer (J) to one ofthe drawer sides (H) and fix intoposition using the hinge and screwsprovided.

2. Fit the other side (H) as shown.

3. Rotate the drawer and slide thedrawer base (I) into position.

4. Fix the drawer front (G) as shownabove.

The drawer is now complete.

5

PACK CONTENTS

I

J

K

L

M

N

O

P Q

x1

x1

x2

x4

x4

x4

x4

x8x8

Drawer base

Drawer rear

Clamp

Workbench dog

Workbench pin

Shelf nut and bolt

Wood Bolt

x4

Washer

8

PP

PP

O

O O

O

Q Q

Q

Q

E

E

ASSEMBLY

5. Lay the workbench (F)on it’s top.

6. Place the Legs intoposition and secure inplace using Bolts (O)and Washers (Q).

At this stage the frameshould look like this.

7. Fix the drawer holders(E) into place using thefour long wood screws(P) supplied.

Make sure that the dowelpins on the drawer holdersare positioned towards thefront of the workbench.

6

ASSEMBLY

A

A

N N

NN

A

B

N

Q

NQ

C

1. Insert the nuts frompart (N) into the sidepieces (A).

2. Use the Bolts (N) andWashers (Q) to secureboth leg frames (B andC) to one of the sidepieces.

At this stage the frameshould look like this.

7

ASSEMBLY

A

BC

D

Q

NQ

N

3. Slide the shelf base (D)into the grooves asshown.

At this stage the frameshould look like this.

4. Secure the secondside piece to the twoleg frames using Bolts(N) and Washers (Q).