7
Certificate of Approval Approving a Service Supplier engaged in surveys and maintenance of the fire extinguishing/fire detection equipment and system aboard ships or mobile offshore units classed with the Society BUREAU No. RTDOIWKM/20131023112930 VERITAS lssued within the scope ofthe Bureau Veritas Marine & Offshore Oivision Genera! Conditions Délivrée dans Ze cadre des Conditions Générales de la Division Marine & Offshore du Bureau Veritas Company: Company address*: HANSASAFETYSERVICESB.V. PUNTWEG 16A 3208 LD SPIJKENISSE NETHERLANDS Scope of the approval: Surveys and maintenance of the fire extinguishing/fire detection equipment and system aboard ships or mobile offshore units classed with the Society as per the list included in the attached Schedule of Approval. This is to certify that: The undersigned Surveyor of the Society, acting within the Bureau Veritas Marine Division General Conditions, has performed, at the Service Supplier's request, an assessment of the facilities, organisational structure and procedures of the said Service Supplier, in compliance with the relevant requirements of the Society Rule Note NR 533. The facilities, organisational structure and procedures were found satisfactory for the servicing of the equipment described in the attached Schedule of Recognition. The Certificate is valid until**: 9 September 2016 Completion date of the assessment on which this certificate based: 10 September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS W.K.Middelbeek At: ROTTERDAM; ROTTERDAM on 23 October 2013 • Refer to the appendix for the list of subsidiaries covered by this certificale ** Not later than 3 years after the date of evaluation The latest published Rules ofthe Bureau Veritas Marine & Offshore Division and the General Conditions therein are applicable. La dernière édition des Règlements de la Division Marine & Offshore du Bureau Veritas ainsi que les conditions Générales qui y figurent sont applicab/es Any pcrson not a party 10 thc contract pursuant to which Ibis ccrtificate is delivered may not assen a claim against Bureau Ventas for any liabiliry ansing out of errors or omissious which may he conramed in said ccrtificate, or for errors of judgernem, fault or negligcnce eommitted by persennel ofthc Society or ofirs Agcnrs in tbc establishment er issuenee ofthis ccrtificarc, .md in connection with any acrivirics for which Ît may provide. TOl/tepersenne qui n 'est pas portie 0/1 controt al/x tennes duquet ce document est délivré ne pourra engager la responsabiltté du Bureau Veri/as pour les inexactitudes ou omissions qui pourraiem y être relevees ainsi que paur les eTTeurs de jugemenr. fautes ou négligences commises par le personnet de la Société ou par ses agents dans Tétablissement de ce doenment el dans l'exécntion des intervennons ou 'il comporte. Ad NE1537

Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate of ApprovalApproving a Service Supplier engaged in surveys and maintenance of the fire

extinguishing/fire detection equipment and system aboard ships or mobile offshoreunits classed with the Society

BUREAU No. RTDOIWKM/20131023112930VERITAS

lssued within the scope ofthe Bureau Veritas Marine & Offshore Oivision Genera! ConditionsDélivrée dans Ze cadre des Conditions Générales de la Division Marine & Offshore du Bureau Veritas

Company:

Company address*:

HANSASAFETYSERVICESB.V.

PUNTWEG 16A

3208 LD SPIJKENISSENETHERLANDS

Scope of the approval:Surveys and maintenance of the fire extinguishing/fire detection equipment and system aboard ships or mobileoffshore units classed with the Society as per the list included in the attached Schedule of Approval.

This is to certify that:The undersigned Surveyor of the Society, acting within the Bureau Veritas Marine Division General Conditions, hasperformed, at the Service Supplier's request, an assessment of the facilities, organisational structure andprocedures of the said Service Supplier, in compliance with the relevant requirements of the Society Rule Note NR533.

The facilities, organisational structure and procedures were found satisfactory for the servicing of the equipmentdescribed in the attached Schedule of Recognition.

The Certificate is valid until**: 9 September 2016

Completion date of the assessment on which th is certificate based: 10 September 2013

Bureau Veritas Surveyor's signature : For BUREAU VERITASW.K.Middelbeek

At: ROTTERDAM; ROTTERDAM on 23 October 2013

• Refer to the appendix for the list of subsidiaries covered by this certificale** Not later than 3 years after the date of evaluation

The latest published Rules ofthe Bureau Veritas Marine & Offshore Division and the General Conditions therein are applicable.La dernière édition des Règlements de la Division Marine & Offshore du Bureau Veritas ainsi que les conditions Générales qui y figurent sont applicab/es

Any pcrson not a party 10 thc contract pursuant to which Ibis ccrtificate is delivered may notassen a claim against Bureau Ventas for any liabiliry ansing out of errors or omissious whichmay he conramed in said ccrtificate, or for errors of judgernem, fault or negligcnce eommittedby persennel ofthc Society or ofirs Agcnrs in tbc establishment er issuenee ofthis ccrtificarc,.md in connection with any acrivirics for which Ît may provide.

TOl/tepersenne qui n 'est pas portie 0/1 controt al/x tennes duquet ce document est délivré nepourra engager la responsabiltté du Bureau Veri/as pour les inexactitudes ou omissions quipourraiem y être relevees ainsi que paur les eTTeurs de jugemenr. fautes ou négligencescommises par le personnet de la Société ou par ses agents dans Tétablissement de cedoenment el dans l'exécntion des intervennons ou 'il comporte.

Ad NE1537

Page 2: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate W RTDO/WKM/20131023112930Company Name HANSA SAFETY SERVICES B.V.

SCHEDULE OF THE APPROVAL

1- List of equipment and systems

Fixed gas fire-extinguishing systems (precise fire extinguishing medium)

I Type C Manufacturer IIr-an-y------------~--------------~[Mi.----------~~~~~------------~.~

Fixed pressure water-spraying and water-mist fire-extinguishing systems

IType ~ Manufacturer--an-y--------------~---------------~r-a-ny-----------------------------------------

Automatic sprinkler, fire detection and fire alarm systems

IType c= Manufacturer

any Li!ii:-------------------------------------

Portable fire extinguishers

IType [ Manufacturer

-F~0-a-m----P-ow--de-r---C-O--2~~--------------~L~A-n-y--------------------------------------

For extension of this Recognition ta types andlar manufacturers of Equipment ather than those a/ready /isted in thisCertificate, it may be necessary that the Service Supp/ier app/ies tor and abtains autharizatian af the saidmanufacturers.

2- List of subsidiaries covered by this certificate

Main Office Spijkenisse-the Netherlands

3- Condition for the validity of the certificate of approval

The certification is valid insofar as the inspection duties are actually assumed by personnel of the Service Supplierwho has been assessed by the Society.

The Society reserves the right to invalidate this certificate of approval in case of :- a wilful act or omission or grossly negligent act or omission in the performance of the services or in the reporting,- major deviations from the qualified system of the Service Supplier,-services performed outside the scope of the qualification or by a technician of the Service Supplier who has notbeen assessed by the Society for the undertaken inspections activities,- unreported alterations to the system or technical personnel

4- Other conditions

The present certificate does not apply to personnel engaged in survey, maintenance and test of fireextinauising/fire detection and systems on board ships or mobile offshore units classed with the society. When

Ad NE1537

Page 3: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

conducted test and maintenance activities by Hansa Safety Services personnal these activities are to be conductedstrictly according system manufacturers instructions and recommendation with the used of the applicable Manualsand instructions books.

5- Endorsement where an intermediate audit has been performed

Signed:(Surveyor to Bureau Veritas)

Place:

Date:

Ad NE1537

Page 4: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate of ApprovalApproving a Service Supplier engaged in service on inflatable liferafts,inflatable lifejackets, hydrostatic release units and inflatable rescue boats

aboard ships or mobile offshore units classed with the Society

BUREAU No. RTDO/WKM/20131024113415VERITAS

lssued within the scope ofthe Bureau Veritas Marine & Offshore Division Genera! ConditionsDélivrée dans le cadre des Conditions Générales de la Division Marine & Offshore du Bureau Veritas

Company:

Company address*:

HANSASAFETYSERVICESB.V.

PUNTWEG 16A

3208 LD SPIJKENISSENETHERLANDS

Scope of the approval:Survey. maintenance and test of inflatable liferafts, inflatable lifejackets, hydrostatic release units and inflatablerescue boats as per the list included in the attached Schedule of Approval,

This is to certify that:The undersigned Surveyor of the Society, acting within the Bureau Veritas Marine Division General Conditions, haspertormed, at the Service Supplier's request, an assessment of the facilities, organisational structure andprocedures of the said Service Supplier, in compliance with the relevant requirements of the Society Rule Note NR533.

The facilities, organisational structure and procedures were found satisfactory for the servicing of the equipmentdescribed in the attached Schedule of Recognition.

The Certificate is valid until**: 9 September 2016 I

Completion date of the assessment on which this certificate based: 10 September 2013

Bureau Veritas Surveyor's signature : For BUREAU VERIT ASW.K.Middelbeek

At: ROTTERDAM on 24 October 2013

• Refer to the appendix for the list of subsidiaries covered by this certificate•• Not later than 3 years after the date of evaluation

The latest published Rules ofthe Bureau Veritas Marine & Offshore Division and the General Conditions therein are applicable.La dernière édition des Règlements de la Division Marine & Offshore du Bureau vertras atnsi que les conditlans Générales qui y figurent sont applicables

Any persen nol a party [0 rhc contract pursuanr to which this certificete is dclivcrcd may nolassen a claim against Bureau Ventas for any liebility arising out of errors or omissions whichmay bc conrained in said certificate. er for errors of'judgcmcnt, fault or negfigence comminedby persounel of the Society orofits Agents in the establishment or issuance of rhis certificate.end in conneenon wirh any acriviries for which it may provide.

TOl/tepersenne qui 11'est pos partie 0/1 controt aux tennes duquel ce document est délivré nepourra engager la responsabiltté du Bureau Ventas ponr les inexactitude: ••mi omissions quipourraient y être relevees ainsi que pour les en'eurs de jugemens. {autes ou négligencescammises par le personnet de la Société ou par ses agents dans t'établissement de cedocument at dans l'excculÈon di interventions qu 'i/ comporre.

Ad NE1537

Page 5: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate W RTDO/WKM/20131024113415Company Name HANSA SAFETY SERVICES B.V.

SCHEDULE OF THE APPROVAL

1- List of equipment and systems

Equipment Type Manufacturer Licence/Recognition N°Inflatable liferafts Na Na NaInflated boatslrescue boats Na Na NaInflatable lifejackets Mullion Mullion Survival Technology

LTDHydrostatic release units Na Na Na

Far extensian of this Recagnitian ta types and/ar manufacturers of Equipment ather than thase a/ready /isted in thisCertificate, it may be necessary that the Service Supplier app/ies tor and abtains autharizatian af the saidmanufacturers.

2- List of subsidiaries covered by this certificate

Main Office Spijkenisse

3- Condition for the validity of the certificate of approval

The certification is valid insofar as the inspection duties are actually assumed by personnel of the Servic Supplierwho has been assessed by the Society.

The Society reserves the right to invalidate this certificate of approval in case of :- a wilful act or omission or grossly negligent act or omissian in the performance of the services or in the reporting,- major deviations from the qualified system of the Service Supplier,- services performed outside the scope of the qualification or by a technician of the Service Supplier who has notbeen assessed by the Society for the undertaken inspections activities,- unreported alterations to the system or technical personnel

4- Other conditions

Certificate applies to Inflatable Life Jacket by Manucaturer Million only.

5- Endorsement where an intermediate audit has been performed

Signed:(Surveyar to Bureau Veritas)

Place:

Date:

Ad NE1537

Page 6: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate of ApprovalApproving a Service Supplier engaged in surveys and maintenance

of self contained breathing apparatus aboard ships or mobile offshore unitsclassed with the Society

BUREAU No. RTDOIWKM/20131023113255VERITAS

Issued within the scope ofthe Bureau Veritas Marine & Offshore Division General ConditionsDélivrée dans le cadre des Conditions Générales de la Division Marine & Offshore du Bureau Veritas

Company:

Company address*:

HANSA SAFETY SERVICES B.V.

PUNTWEG 16A

3208 LD SPIJKENISSENETHERLANDS

Scope of the approval:Survey, maintenance and test of self-contained air breathing apparatuses as per the list included in the attachedSchedule of Approval.

This is to certify that:The undersigned Surveyor of the Society, acting within the Bureau Veritas Marine Division General Conditions, hasperformed, at the Service Supplier's request, an assessment of the facilities, organisational structure andprocedures of the said Service Supplier, in compliance with the relevant requirements of the Society Rule Note NR533.

The facilities, organisational structure and procedures were found satisfactory for the servicing of the equipmentdes cri bed in the attached Schedule of Recognition.

The Certificate is valid until**: 9 September 2016

Completion date of the assessment on which this certificate based: 10 September 2013

Bureau Veritas Surveyor's signature : For BUREAU VERIT ASW.K.Middelbeek

At: ROTTERDAM; ROTTERDAM on 23 October 2013

• Refer to the appendix for the list of subsidiaries covered by this certificate•• Not later than 3 years after the date of eva/uation

The latest published Rules ofthe Bureau Veritas Marine & Offshore Division and the General Conditions therein are applicabie.La dernière édition des Règlements de la Division Marine & Offshore du Bureau Veritas ainsi que les conditions Générales qui y figurent sont applicobles

Any persou not a party 10 thc contract pursuant 10 which this certificate is delivored may notassen a claim against Bureau Ventas fur any liabiliry arising out of errors or omissions whichmay bc coruained in said cenificate, or for errors ofjudgcmcnt, fault or negligénee commirtedby pcrsonnel of the Society or of irs Agcnts in tbc establishment or issuance of this certificate,and in conneenon with any activities for which ir may provide.

TOl/Ie personne qui n 'est pas partie au cantrat aux tenues duqllel ce document est délivré »epourra engager la responsabilité dil Bureau Ventas pour les inexactitudes ou omissions quipourraient y être relevees ainsi que pour les erreurs de jugemenr. routes ou négligencescammises par le persounel de la Société ou par ses agems dans l'érabltssemem de cedocument el dans J 'exécmion des interventions qu'jf comporte.

Ad NE1537

Page 7: Certificate ofApproval - Hansa Safety · Completion date ofthe assessment onwhich this certificate based: 10September 2013 Bureau Veritas Surveyor's signature : For BUREAU VERITAS

Certificate W RTDO/WKM/20131023113255Company Name HANSA SAFETY SERVICES B.V.

SCHEDULE OF THE APPROVAL

1- List of equipment and systems

Type ManufacturerDrager BA sets and equipment as below DragerPanorama Nova (Supra)/FPS 7000/PSS LDV DragerPSS 90/PSS100/PSS 5000/PSS 7000 DragerPas Colt/Saver CF DragerDrager BA pressure cilinders Drager

Fot extensian af this Recagnitian to types andlar manufacturers af Equipment ather than thase a/ready /isted in thisCertificate, it may be necessary that the Service Supp/ier applies tor and abtains autharizatian af the saidmanufacturers.

2- List of subsidiaries covered by this certificate

Main office Spijkenisse-the Netherlands

3- Condition for the validity of the certificate of approval

The certification is valid insofar as the inspection duties are actually assumed by personnel of the Service Supplierwho has been assessed by the Society.

The Society reserves the right to invalidate this certificate of approval in case of :- a wilful act or omission or grossly negligent act or omission in the performance of the services or in the reporting,- major deviations from the qualified system of the Service Supplier,-services performed outside the scope of the qualification or by a technician of the Service Supplier who has notbeen assessed by the Society for the undertaken inspections activities,- unreported alterations to the system or technical personnel

4- Other conditions

The present certificate does not apply to personnel engaged in surveys - aintenance and test of self-contained airbreathing apparatus.The maintenance done on the equipment is to be done stricktly according manufacturersauthorisation and mainteance instructions

5- Endorsement where an intermediate audit has been performed

Signed:(Surveyar ta Bureau Veritas)

Place:

Date:

Ad NE1537