CE~TlFIEDCO 'y

l.l~yclsl-{eglsfer

CERTIFICATE OF FIRE APPROVAL

TI1isis to certify that

The product detailed below will be accepted for compliance with the applicable Lloyd's Register Rules andRegulations and with the International Convention for the Safety of Life at Sea, (SOLAS), 1974, as amended, foruse on ships and offshore installations classed with Lloyd's Register, and for use on ships and offshoreinstallations when authorised by contracting governments to issue the relevant certificates, licences, permits etc.

Manufacturer NoFire Technologies Inc.

Address 21 Industrial AvenueUpper Saddle RiverNew Jersey 07458United States of America (USA)

Type MATERIAL HAVING LOW FLAME SPREAD CHARACTERISTICSAND NOT CAPABLE OF PRODUCING EXCESSIVE QUANTITIESOF SMOKE AND TOXIC PRODUCTS OF COMBUSTION

Description Fire Resisting Material - Type: "NoFire A-I8 Fire RetardentIntumescent Paint (500 microns nominal thickness)

Specified Standard !MO Fire Test Procedures Code, Annex 1, Part 5 and Annex 2

The attached Design Appraisal Document forms part of this certificate.This certificate remains valid unless cancelled or revoked, provided the conditions in the attached DesignAppraisal Document are complied with and the equipment remains satisfactory in service.

Date of issue 2 November 2005 Expiry date 1 November 2010

Certificate No. SASF050371 Signed

L10y s Register North AmericaSheet No Iof2

USA, East Coast 'Name CKCB.McDonald

NeW;bi!.w~yw\toLloyd's Regis.~khe-W r . up

Note:

This certificate is not valid for equipment, the design or manufacture of which has been varied or modifiedfrom the specimen tested. The manufacturer should notify Lloyd's Register of any modification or changes tothe equipment in order to obtain a valid Certificate .

• Lloyd's Register. its affiliates and subsidiaries and their respective officers, employees or agents are. individually and collectively, referred to in this dause as the 'Lloyd's RegisterGroup': The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the infonnation oradvice In th." document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information oradvice and In that case any responsibility or liability is exclusively on the terms and conditions set out in that contract."

Page

2 of 2Document number

SAS F050371Issue num ber

1

l.l~yclsl,eglsfer

Lloyd's Register EMEA71 Fenchurch Street, London, EC3M 4BSTelephone 020 7423 2940 Fax 020 73974246Email dcg-stat@lr.org

DESIGN APPRAISAL DOCUMENTDate

2 November 2005Quote this reference on all future communications

LPAjFSS/SPS/FITAjBM

ATTACHMENT TO CERTIFICATE OF TYPE APPROVAL No. SAS F050371

111isDesign Appraisal Document forms part of the Certificate.

APPROVAL DOCUMENTATION

(SWRI) Southwest Research Institute, Chemistry & Chemical Eng. Division, Department of Fire Technology,Texas, United States of America, Fire Test Report No. 01.03071.01.015a, dated January 2000.

CONDITIONS OF CERTIFICATION

1. Smoke and toxicity criteria is satisfied by meeting the total heat release (Qt) and peak heat release rate(qp) as stated in IMO Fire Test Procedures Code, Annex 2, Section 2.2.

2. Production items are to be manufactured in accordance with a quality control system which shall bemaintained to ensure that items are of the same standard as the approved prototype.

3. 111is product is certified as a surface coating only, and not as an insulation material.

PLACE OF PRODUCTION

Amsterdam Color Works4804, Farragut RoadBrooklyn,NY 11203United States of America

Bruce McDonaldSenior SurveyorSafety & Pollution ServicesLondon Plan ApprovalLloyd's Register EMEA

Sllpplem.entanl Tlme Avproval Ten/IS and Conditions

This certificate and Design Appraisal Document relates to ttJPeapproval, it certifies that the protoivpete) of theproduct(s) referred to herein has/haoe beenfound to meet the applicable design criteriafor the use specified herein, itdoes not mean or imply approval for any other use, nor approval of any products designed or manufacturedotherunse than in strict conformity with the said prototupets).