Upload
others
View
5
Download
1
Embed Size (px)
Citation preview
FUNCTIONAL SAFETYCERTIFICATE
according to IEC EN 61508:2010
Certificate No.: C-IS-236198-09 Rev.3
CERTIFICATE OWNER: G.M. International S.r.l.Via G. Mameli, 53-55 I-20852 Villasanta (MB) – ITALY
WE HEREWITH CONFIRM THAT G.M. INTERNATIONAL S.R.L.
MEETS THE REQUIREMENTS OF IEC EN 61508:2010 PART 1 CLAUSES 5 – 6:
The Management of Functional Safety results to be in compliance to the
above mentioned Clauses of IEC 61508:2010, for safety related systems up
to and included SIL 3.
Examination result: G.M. International S.r.l. was found to meet the standard defined requirements according to IEC EN 61508:2010 part 1 clause 5 - 6, under fulfillment of the conditions listed in the related Reports, in their currently valid version, on which this Certificate is based
Examination parameters: Documentation and Management of the Functional Safety
Applicable lifecycle phases: Phase 10 – Realisation of safety-related system (IEC EN 61508-1 Clause 7)
Official Report No.: R-IS-722189296
Reference Standard IEC EN 61508:2010 Part 1
Sesto San Giovanni, July, 15th 2020
TÜV ITALIA Srl TÜV ITALIA Srl Industry Service Division
Technical Manager
Paolo Marcone