Centrifuge Labware

Centrifuge Labware Tubes – Bottles – Adapters

2014-02

page 2 of 34

Laborgeräte GmbH

Represent for Switzerland HEMOTEC GMBH Ribistrasse 7 CH-4460 Gelterkinden

Tel.: +41 (0) 61 981 66 33 Fax: +41 (0) 61 981 40 26 E-Mail: [email protected]

Internet: www.hemotec.ch

CENTRIFUGE LABWARE

2014-02

All products built by Herolab carry the CE sign. Herolab is certified after DIN EN ISO 9001.2008 and DIN EN ISO 13485.

All prices without MWSt, ex works. – Herolab reserves the right to change technical specifications and prices without prior notice.

Contents 1. Selection Guide Page 3

1.1. Volume Page 3 1.2. Chemical Resistance Page 3 1.3. Thermal Resistance Page 3 1.4. Transparency Page 3

2. Material Description Page 4 2.1. Materials for Tubes and Sealing Caps Page 4 2.2. Sterilization Page 5 2.3. Chemical Resistance Page 6 2.4. Nomograph Relative Centrifugal Force Page 8

3. Ordering Information and Prices Page 9 3.1. Glass Tubes Page 9 3.2. Plastic Tubes Page 12 3.3. Advanced Oak Ridge Tubes Page 16 3.4. Bottles Page 20 3.5. Tubes and Bottle for Ultra Centrifuges Page 25 3.6. Other Accessories Page 28

4. Compatibility with Rotors of other Manufacturers Page 29

5. Price List (sorted by Catalog No.) Page 30

Many factors influence the performance characteristics and lifespan of centrifuge consumables. This catalog has been compiled as a general guideline but, in no case, expresses absolute guarantee of the products under laboratory conditions. Due to the large number of different applications and techniques the single „perfect“ material for centrifuge tubes does not exist. A material may show excellent performance qualities in one application and then fail horribly in the next.

Note: All centrifuge tubes should be tested prior to use. At the first sign of irregularities these tubes

should be discarded or the maximum speed should be lowered drastically.

List of used trademarks: AOR – Advanced Oak Ridge Tubes (Utility patent of Herolab GmbH Laborgeraete) Borex and Polyflor are registered trademarks of Herolab GmbH Laborgeraete, Wiesloch, Germany. Delrin – is a registered trademark of DuPont, Delaware, U.S. Duran – is a registered trademark of Schott, Mainz, Germany.

mailto:[email protected]

http://www.hemotec.ch/

page 3 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



1.1. Volume

The volume of the tubes is determined by the size of the sample material, the rotor bores and the necessary adapters.

1.2. Chemical Resistance

Chemical Groups B, D PA PPCO PP PE PC PF PS

Acids, dilute S S S S S S S S

Acids, strong S S S S S U S M

Alcohols and bases S S S S S U S S

Aldehydes and oxidizing agents S M M M M M S U

Esters S M M M M U S U

Hydrocarbons Aliphatic (i.e. hexane)

S M M S U U S U

Hydrocarbons halogenated or aromatic (i.e. phenol, chloroform)

S M M M M U S U

Ketones (i.e. acetone) S M M M M U S U

Salts S S S S S M S M

1.3. Thermal Resistance

Temperature Range B, D PA PPCO PP PE PC PF PS

< +4°C U S S U S S S U

+4°C to +20°C S S S M S S S S

+20°C to +40°C S M S S S S S S

Autoclavable S S S S U S S U

Note: For continuous low temperature applications PPCO resp. PA is the material of choice.

1.4. Transparency

Transparency Range B, D PA PPCO PP PE PC PF PS

Transparent x x x

Translucent x x x x

Opaque x

S Satisfactory B Borex® Glass PPCO Polypropylene Copolymer PC Polycarbonate

M Marginal, test runs recommended D Duran® Glass PP Polypropylene PF Polyflor

®

U Unsuitable, not recommended PA Polyallomer PE Polyethylene PS Polystyrene

1.

Selection Guide



page 4 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



2.1. Materials for Tubes and Sealing Caps Tubes and capping systems can only function at optimal performance levels if the rotor and centrifuge are kept in the best possible condition. The condition of your rotors is critical to ensure the correct functioning of the tube and capping system. Follow the instructions in your rotor manual and clean your rotors carefully after each run to prevent the start of corrosion and rotor degradation.

Glass Borex = B / Duran = D / HS = High-Speed Temperature range: B = 0 to + 250°C / D = 0 to + 200°C / HS = 0 to + 300°C

Transparent glass tubes are available in Borex and Duran for low speed applications when clarity and good chemical tolerance is required. Glass tubes must be treated with care when removing pellets, washing and storing. Surface scratches and etchings will significantly reduce the life span of glass tubes. All glass tubes show a better tolerance to high temperatures than to low temperatures. However, strong acids and bases may attack the glass surface at elevated temperatures. Hydrofluoric acid attacks glass already at room temperature. High-Speed glass can be spun at higher g-forces than the other two glass materials.

Polyallomer PA or Polypropylene Copolymer PPCO Temperature range: - 40° to + 125°C

Polyallomer is a copolymer of polypropylene and polyethylene resulting in a material with the best features of each component. It is a translucent material which attains additional "contact" clarity when filled with liquid allowing easy viewing of pellets, liquid levels and interfaces. PA is the most versatile of all tube materials and is the best choice if uncertain about the particular effects of an application on a polymer.

Polyallomer is the material of choice for continuous low temperature centrifugation applications.

Polypropylene PP Temperature range: - 180° to + 145°C

Polypropylene is a translucent material with good chemical and temperature resistance.

It may become brittle when exposed to low temperatures; therefore, centrifugation at temperatures below 4°C should be avoided. It is important to equilibrate cold tubes to the temperature of the run before centrifuging, particularly if experimental protocols call for repeated spins and temperature adjustments. Polypropylene is only translucent, but liquid levels, sharp interfaces and pellets can be easily viewed.

Polyethylene PE Temperature range: - 180° to + 90°C

Polyethylene is the material of choice for techniques involving acetone, acetic or hydrochloric acid. It is an opaque polymer which makes the viewing of tube contents slightly difficult; however its increased flexibility, compared to other polymers, makes it an excellent tube for slicing, piercing or low temperature applications. Polyethylene tubes need to be completely filled and capped to run at maximum speeds. Polyethylene is sensitive to high temperatures and cannot be autoclaved.

2.

Material Description



page 5 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



Polycarbonate PC Temperature range: - 150° to + 121°C

Polycarbonate is a transparent, rigid and non-pierceable material. It is compatible with neutral salt and dilute acid solutions but extremely sensitive to organic solvents, alcohols, oils, DMSO and alkaline solutions. Tubes and bottles are reusable, but care should be taken to avoid scratching the surface with glass rods and hard bristle brushes. Please use rubber coated spatulas and soft bristle brushes. – Important note for cleaning: Use only mild, non-alkaline detergents and wash them by hand. Repeated washing in machines or the use of alkaline detergents will damage the material.

Polyflor PF Temperature range: - 100° to + 140°C

Polyflor is a translucent material with excellent chemical resistance to acids, bases, salts and organic solvents at temperatures encountered during centrifugation. Some organic solvents will attack the fluorocarbon but only at elevated temperatures above 50°C. This Teflon-like polymer has excellent temperature resistance and is a good choice for low temperature applications. The material is slightly flexible and tubes need to be completely filled and capped to run at the maximum listed speeds.

Polystyrene PS Temperature range: - 10° to + 75°C

Polystyrene is a transparent rigid material compatible with most aqueous based solutions but not with most organic solvents. This material has limited temperature resistance and cannot be autoclaved. Tubes will break if dropped or subjected to high stress conditions (temperature extremes or high g-forces). All polystyrene tubes are thickwall and should be used only once, then discarded. The primary uses of polystyrene tubes are low speed applications, i.e. pelleting, when clarity is essential.

2.2. Sterilization

Sterilization B, D, HS PA PPCO PP PE PC PF PS

Autoclave x x x x x x

Dry Heat x x

Gas x x x x x x x x

Chemical x x x x x x x x

UV Light x x x

Tubes or bottles made of PA, PC, PF, PPCO and PP can be autoclaved repeatedly under the normal condition of at least 15 minutes at 121°C and 103 kPa (1,03 bar = 15 psi). The sterilization time for PC should not exceed 20 minutes at 121°C, as repeated sterilization reduces the mechanical rigidity of PC but also of all other plastic materials as well. Pathogenic prions (Creutzfeld-Jakob disease, (vCJD)) can be destroyed only through sterilization at 134°C with duration of 18 minutes. For this application we, Herolab, can offer a special polypropylene (PPCO) on request.

General guidelines for autoclaving:

All products must be thoroughly rinsed with distilled water before being autoclaved, since residues of cleansing agents can cause cracks, discolorations and stains.

Closures of tubes or bottles need to be removed completely before autoclaving in order to prevent damages during the cooling-down process.

Tubes and bottles that had been autoclaved previously must be checked for signs of deformation or cracks before using them again.

2.




page 6 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



2.3. Chemical Resistance

PA PPCO

PC PE PF PP PS PA PPCO

PC PE PF PP PS

acetaldehyde M U M M M U deoxycholate S S S - S -

acetic acid (5%) S S S S S1 U dextran (dextran sulfate) S S S S S -

acetic acid (60%) S U S S M S diacetone S - S S S M

acetic acid (glacial) S U M S U U diethylether M U U S M U

acetone S U S M S U diethyl ketone U U M - M U

Alconox® S M S - S - diethylpyrocarbonate S U S - S U

allyl alcohol S S S - S M N,N-dimethylformamide S U S U S U

aluminium chloride S S S S S M dimethylsulfoxide S U U - S U

aluminium fluoride S U S S S M dioxane M U S M M S

ammonia S U U S S S ethanol (5%) S U S S S S

ammonium acetate S S S - S S ethanol (50%) S U S S S S

ammonium carbonate S U S S S - ethanol (70%) S U S S S S

ammonium hydroxide (10%) S1 U S S S

1 S ethanol (95%) S U M S S U

ammonium hydroxide (28%) S1 U S S S

1 M ethyl acetate M U U S U U

ammonium hydroxide (cone.) S1 U S S S

1 M ethylene dichloride U U U S U U

ammonium phosphate S S S S S - ethylene glycol S U S S S S

ammonium sulfate S S S S S - ethylene oxide S M S S S U

ammonium sulphide S U - S S S ethylene M U U - M -

amyl alcohol M S S S M S fatty acids, saturated S S U S S S

aniline (benzenamine) U U U S M U fatty acids, unsaturated S S U S S S

Aqua Regia U U U - U M ferric chloride S — S S — —

barium salts S S S S S - Ficoll-Paque S S S - S -

benzene U U U S U U fluoroboric acid S - S - S -

benzyl alcohol U U U S U U formaldehyde (5%) S S S S S S

boric acid S S S S S S formaldehyde (40%) S S S S S S

n-butyl alcohol S M M S S S formic acid (3%) S U S - S S

calcium chloride S M S S S1 - formic acid (10%) S U S - S S

calcium hydrochloride S M S S S M gallic acid S - S S S -

carbon tetrachloride U U U - U U glycerol S S S S S S

cesium acetate S S S - S - guanidine hydrochloride S U S - S -

cesium bromide S S S S S - guanidine isothiocyanate S U - - - -

cesium chloride S S S S S - Haemo-Sol S S S - S -

cesium formate S S S - S - 2-heptyl S - S S S -

cesium iodide S S S - S - hexane M U U S S U

cesium sulfate S S S S S - hydrochloric acid (5%) S S S S S S

cesium trifluoracetate S S S - S - hydrochloric acid (10%) S U S S S S

chlorine water S S M S S M hydrochloric acid (37%) M U S S M S

chlorobenzene U U U S U U hydrochloric acid (50%) M U S S M S

chloroform M U M S M U hydrochloric acid (cone.) M U - S S S

chromic acid (10%) S M U S S M hydrofluoric acid (10%) S M S S S S

chromic acid (50%) S1 U U S S M hydrofluoric acid (50%) S U S S S S

citric acid (10%) S S S S S S hydrofluoric acid (100%) S U S S S -

cresol M U U - U M hydroformic acid (100%) S - S - S -

cyclohexane U U U S U U hydrogen peroxide (3%) S S S1 S S S

cyclohexanol S M S S S S hydrogen peroxide (100%) S S S1 S S M

2.


Note: This chart has been consolidated from a number of sources. Chemical resistance data is included only as a guide to the select ion of tube materials.

No organized chemical resistance data exist for materials under the stress of centrifugation. The recommendation is to test sample lots prior to use.

2.




page 7 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



PA PPCO

PC PE PF PP PS PA PPCO

PC PE PF PP PS

isbutanol S S S - S M potassium hydroxide (45%) S U S S U M

isopropanol S U S - S M potassium hydroxide (cone.) S U S S U M

kerosene U U U S U U potassium permanganate S S S S S -

lactic acid (20%) S S M S S S 2-propanol S U S S S S

lactic acid (50%) S S M S S S pyridine (50%) M U U M S U

lactic acid (100%) S S M S S S rubidium bromide S S S - S -

lauryl alcohol S - S - S - rubidium chloride S S S - S -

lead acetate S - S S S - silver cyanide S - S S S -

magnesium chloride S S S S S - silver nitrate S S S S S M

magnesium hydroxide S U S S S - sodium bisulphate S S S S S -

maleic acid S — S S S — sodium borate S S S - S -

manganese salts S - S - S - sodium bromide S S S S S -

mercaptoacetic acid S U U - U - sodium carbonate S U S S S -

2-mercaptoethanol S U - - S - sodium chloride (10%) S S S S S S

methanol S U S S S1 S sodium chloride, saturated S S S S S -

methyl ethyl ketone S U U M S U sodium dichromate S - S - S -

methylene chloride U U U S U U sodium dodecyl sulfate S S S S S -

metrizamide S S S - S - sodium hydroxide (1%) S U S - S S

nickel salts S S S S S - sodium hydroxide (10%) S U S - S S

nitric acid (10%) S1 S S S S S sodium hydroxide (cone.) M U S - M S

nitric acid (30%) S1 M U S M S sodium hypochlorite S

1 S U S U -

nitric acid (50%) S1 M U S M M sodium iodide S S S - S -

nitric acid (95%) M U U S M M sodium nitrate S U S S S -

oils (petroleum) S U U S U S sodium peroxide S - S S S -

oils (other) S U U S S S sodium sulfate S S S S S -

oleic acid S S S - S - sodium sulfite S S S S S -

oxalic acid S U S S S - sodium sulphide S U S S S -

perchloric acid (10%) S U M S M M sodium thiosulphate S S S S S -

perchloric acid (70%) M U M S M M Solution 555 (20%) S S S - S -

phenol (5%) S U M S S M sucrose S S S S S S

phenol (50%) M U M S M M sucrose, alkaline S U S - S S

phenylethyl alcohol S - S - S - sulfuric acid (10%) S S M S S S

phosphoric acid (10%) S S S S S S sulfuric acid (50%) S U M S S S

phosphoric acid (30%) S S S S S S sulfuric acid (cone.) S1 U S S S

1 -

phosphoric acid (85%) S S S S S S tannic acid S - S - S -

phosphoric acid (cone.) M U S S M - tetrahydrofuran U U U M U U

phosphorus trichloride S U S S S - toluene U U U S U U

physiologic fluids S S S S S - trichloracetic acid S M U - S U

picric acid S S S S S S trichlorethane U U S S U M

potassium acetate S M S - S - trisodium phosphate S - S S S -

potassium bromide S S S S S - Triton X-100 S S S - S -

potassium carbonate S U S S S - turpentine M U U - M U

potassium chlorate S S S S S - urea S S S S S S

potassium chloride S S S S S - water S S S S S S

potassium hydroxide (5%) S U S S S S xylene U U U S U U

Zephiran chloride (1%) S S S - S -

zinc chloride S S S S S -

zinc sulfate S S S S S -

S Satisfactory S1 Discolored M Marginal resistance – We recommend test runs under appropriate conditions (speed and duration) U Unsatisfactory, not recommended - Performance unknown, tests recommended



page 8 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



2.4. Nomograph – Relative Centrifugal Force

2.




page 9 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.1.1. Ordering Information

Available Adapters for rotors with the following bores

14 ml 16 ml 50 ml 250 ml

Nominal Volume

Dimensions (mm) Ø x Length

Material and Form

Cat. No. Tube

Cat. No. Cap

Cat. No. /Places

Cat. No. /Places

Cat. No. /Places

Cat. No. /Places

3 ml 5 ml

10 x 75 12 x 75

D -R B B -R B

25 10 10 25 10 20

25 56 40 / 1

25 55 80 / 1

25 55 10 / 2

25 50 90 /15

25 51 00 / 9

10 ml 10 ml 12 ml 15 ml 15 ml

13 x 100 18 x 102 18 x 102 18 x 102 17 x 98

D -R B D -C B/G B -R B HS -R B D -R B

25 10 40 25 10 60 25 11 00 25 10 91 25 12 80

25 46 50 25 46 50

25 56 00 / 1

25 58 20 / *

25 58 20 / *

25 55 30 / 1

25 55 40 / 1

25 55 50 / 1

25 55 50 / 1

25 51 10 / 9

25 51 30 / 5

25 51 30 / 5

30 ml 30 ml 45 ml

24 x 105 24 x 105 28 x 102

B -R B HS -R B B -R B

25 11 10 25 11 41 25 12 60

25 55 60 / 1

25 55 60 / 1

25 58 00 / *

25 51 60 / 3

25 51 60 / 3

200 ml 60 x 115 D -R B only for

swing-out rotors 25 12 70 25 58 10 / *

* Bottom Support Pad

B Borex® Glass CB Conical bottom FL Flange / Rim

D Duran® Glass RB Round bottom G Graduated

HS High Speed Glass

3.1. Glass Tubes



page 10 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.1.2. Additional Information and Prices

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to ... rpm

Tested

up to ... x g

Units

per pack

25 10 10 3 ml 3.2 ml D -R B 5,000 3,000 10

25 10 20 5 ml 4.8 ml B -R B 5,000 *6,000 10

25 10 40 10 ml 8.0 ml D -R B 5,000 3,000 10

25 10 60 10 ml 8.4 ml D -C /G 10,000 *10,000 10

25 10 91 15 ml 15.0 ml HS -R B 9,000 *12,500 6

25 11 00 12 ml 11.4 ml B -R B 7,000 *12,500 10

25 11 10 30 ml 25.0 ml B -R B 5,000 *12,500 10

25 11 41 30 ml 30.0 ml HS -R B 10,000 *12,500 6

25 12 60 45 ml 31.5 ml B -R B 5,000 8,000 10

25 12 70 200 ml 162.5 ml D -R B 4,000 for swing-out rotors only 2

25 12 80 15 ml 12.0 ml D -R B 5,000 3,000 10

* Speed in rpm in swing-out rotors

3.1.3. Closures for Glass Tubes

Cat. No. Description Fits for: Units

per pack

25 46 50 Rubber cap for glass tubes 25 10 60 25 11 00

10

B Borex® Glass CB Conical bottom FL Flange / Rim

D Duran® Glass RB Round bottom G Graduated

HS High Speed Glass

Attention: Kindly note packaging sizes for your orders.

3.1. Glass Tubes



page 11 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.1.4. Adapters/Bottom Support Pads for Glass Tubes

Cat. No. Description Material Number

of places

For rotor bores

Units

per pack

25 50 90 Adapter Plastic 15 250 ml 2





25 55 10 Adapter Rubber 2 50 ml 2








25 58 00 Bottom Support Pad Rubber 50 ml 4




3.1. Glass Tubes



page 12 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.2.1. Ordering Information Available Adapters for rotors with

the following bores 14 ml 16 ml 50 ml 250 ml

Nominal Volume

Dimensions (mm) Ø x Length

Material and Form

Cat. No. Tube

Cat. No. Cap

Cat. No. /Places

Cat. No. /Places

Cat. No. /Places

Cat. No. /Places

1.0 ml 1.5 ml 4.5 ml 5.0 ml

7 x 50 11 x 40 12 x 75 12 x 75

PS -RB PP -CB -Eppendorf PP -RB PS -RB

25 20 00 25 20 50 25 22 30 25 22 00

included

25 50 71 / 1

25 50 73 / 1

25 50 73 / 1

25 50 70 / 1

25 50 72 / 1

25 50 72 / 1

25 50 00 / 4

25 50 10 / 2

25 50 11 / 2

25 50 11 / 2

25 52 10/15

25 51 00 / 9

25 51 00 / 9

13.0 ml 13.5 ml

17 x 98 16 x 76

PP -RB PP -RB

25 26 10 25 24 70

14 ml 14 ml 14 ml 14 ml 14 ml

18 x 75 18 x 75 18 x 75 18 x 75 18 x 75

PA -R B PC -R B PE -RB PF -R B PP -RB

25 26 90 25 25 70 25 26 60 25 25 90 25 25 80

25 45 50 25 45 50 25 45 51 25 45 50 25 45 50

directly

directly

directly

directly

directly

16 ml 16 ml 16 ml 16 ml

18 x 100 18 x 100 18 x 100 18 x 100

PC -RB/FL PE -RB/FL PF -RB/FL PPCO(PA)-RB/FL

25 27 00 25 27 40 25 27 51 25 27 20

25 45 50 25 45 51 25 45 50 25 45 50

directly

directly

directly

directly

25 50 50 / 1

25 50 50 / 1

25 50 50 / 1

25 50 50 / 1

25 51 30 / 5

25 51 30 / 5

25 51 30 / 5

25 51 30 / 5

50 ml 50 ml 50 ml 50 ml 50 ml 50 ml

29 x 103 29 x 103 29 x 103 29 x 103 29 x 103 29 x 103

PC -RB/FL PC -RB/FL/LC PE -RB/FL PF -RB/FL PPCO(PA)-RB/FL

PPCO(PA)-RB/FL/LC

25 31 00 25 31 05 25 31 30 25 31 51 25 31 60 25 31 45

25 46 00 included 25 46 00 25 46 00 25 46 00 included

directly

directly

directly

directly

directly

directly

70 ml 70 ml 94 ml

35 x 98 35 x 105 38 x 106

PC -RB/G PP -RB PP -RB

25 30 90 25 31 90 25 32 50

100 ml 100 ml 120 ml

40 x 115 45 x 98 40 x 115

PC -RB/G PC -RB/G

PP - R B

25 33 00 25 33 20

25 33 10

25 51 70 / 1

25 51 70 / 1

PA Polyallomer CB Conical bottom FL Flange / Rim

PPCO Polypropylene Copolymer RB Round bottom G Graduated

PP Polypropylene LC Loop cap

PE Polyethylene PF Polyflor®

PC Polycarbonate PS Polystyrene

3.2. Plastic Tubes



page 13 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.2.2. Additional Information and Prices

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to ... rpm

Tested

up to ... x g

Units

per pack

25 20 00 1.0 ml 1.0 ml PS-RB (1.000 St.) 5,000 2,500 pack

25 20 50 1.5 ml 1.5 ml PP-CB-Eppendorf ( 1.000 St.) * 16,000 30,000 pack

25 22 00 5.0 ml 4.5 ml PS-RB (1.000 St.) 5,000 2,500 pack

25 22 30 4.5 ml 4.5 ml PP-RB (1.000 St.) 20,000 36,000 pack

25 25 70 14 ml 11.3 ml PC-RB 24,000 59,889 10

25 25 80 14 ml 10.8 ml PP-RB 20,000 41,590 10

25 25 90 14 ml 10.7 ml PF-RB 20,000 41,590 2

25 26 10 13.0 ml 12.5 ml PP-RB 12,000 16,099 10

25 26 60 14 ml 11.5 ml PE-RB 20,000 41,590 10

25 26 90 14 ml 10.8 ml PA-RB 24,000 59,889 10

25 27 00 16 ml 15.5 ml PC-RB/FL 24,000 70,965 10

25 27 20 16 ml 14.5 ml PPCO(PA)-RB/FL 24,000 70,965 10

25 27 40 16 ml 15.0 ml PE-RB/FL 20,000 49,281 10

25 27 51 16 ml 14.5 ml PF-RB/FL 20,000 49,281 2

25 30 90 70 ml 60.0 ml PC-RB/G 8,000 7,155 10

25 31 00 50 ml 42.8 ml PC-RB/FL 24,000 69,549 10

25 31 05 50 ml 42.8 ml PC-RB/FL/LC * 24,000 69,549 10

25 31 30 50 ml 40.9 ml PE-RB/FL 20,000 48,298 10

25 31 45 50 ml 42.1 ml PPCO(PA)-RB/FL/LC * 24,000 69,549 10

25 31 51 50 ml 40.0 ml PF-RB/FL 20,000 48,298 2

25 31 60 50 ml 42.1 ml PPCO(PA)-RB/FL 24,000 69,549 10

25 31 90 70 ml 62.0 ml PP-RB 8,000 7,155 10

25 33 00 100 ml 100.0 ml PC-RB/G 8,000 8,586 2

25 33 10 120 ml 108.0 ml PP-RB 6,000 5,635 10

25 33 20 100 ml 100.0 ml PC-RB/G 8,000 8,586 10

* Cap included


PPCO Polypropylene Copolymer RB Round bottom G Graduated

PP Polypropylene LC Loop cap

PE Polyethylene PF Polyflor®

PC Polycarbonate PS Polystyrene


3.2. Plastic Tubes



page 14 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.2.3. Closures for Plastic Tubes


per pack

25 45 50 Cap for 14 tubes (PA, PC, PF, PP) and for 16 ml tubes (PPCO(PA), PF, PC)

25 26 90 25 25 70 25 25 90 25 25 80

25 27 00 25 27 51 25 27 20

10

25 45 51 Cap for 14 ml + 16 ml tubes (PE) 25 26 60 25 27 40 10

25 46 00 Cap for 50 ml tubes (Loop Cap)

25 31 00 25 31 30 25 31 51 25 31 60

10


3.2. Plastic Tubes



page 15 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.2.4. Adapter for Plastic Tubes

Cat. No. Description Material Number of

places For rotor

bores Units

per pack














3.2. Plastic Tubes



page 16 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.3.1. Ordering Information Available Adapters

for rotor bores

50 ml 94 ml

Nominal Volume

Dimensions (mm)

Ø x Length

Material and Form

Cat. No. Tube

complete

Cat. No. Tube

Cat. No. Cap

Cat. No. O-Rings

(3 units per pack) Cat. No. Cat. No.

10 ml

10 ml

10 ml

10 ml

16 x 80

16 x 80

16 x 80

16 x 80

PPCO(PA) - AOR

PC - AOR

PE - AOR

PF - AOR

25 24 11

25 24 01

25 24 41

25 24 51

23 24 11

23 24 01

23 24 41

23 24 51

25 46 05

25 46 05

25 46 06

25 46 081

25 58 81

25 58 81

25 50 30

25 50 30

25 50 30

25 50 30

30 ml

30 ml

30 ml

30 ml

25 x 92

25 x 92

25 x 92

25 x 92

PPCO(PA) - AOR

PC - AOR

PE - AOR PF - AOR

25 29 61

25 29 51

25 29 65 25 29 71

23 29 61

23 29 51

23 29 65 23 29 71

25 46 15

25 46 15

25 46 16 25 46 18

1

25 58 83

25 58 83

25 58 84

25 50 61

25 50 61

25 50 61 25 50 61

50 ml

50 ml

50 ml

50 ml

29 x 103

29 x 103

29 x 103

29 x 103

PPCO(PA) - AOR

PC - AOR

PE - AOR

PF - AOR

25 32 11

25 32 01

253215

25 32 21

23 32 11

23 32 01

23 32 15

23 32 21

25 46 25

25 46 25

25 46 26

25 46 281

25 58 85

25 58 85

25 58 85

25 58 86

directly

directly

directly

directly

80 ml

80 ml

80 ml

80 ml

38 x 105

38 x 105

38 x 105

38 x 105

PPCO(PA) - AOR

PC - AOR

PE - AOR

PF - AOR

25 32 45

25 32 41

25 32 47

25 32 49

23 32 45

23 32 41

23 32 47

23 32 49

25 46 35

25 46 35

25 46 35

25 46 381

25 58 87

25 58 87

25 58 88

25 58 89

directly

directly

directly

directly

1 These screw caps are made of Polyflor too.

Overwind-protected and gas-tight

The ultimate seal for both routine and special

applications and high demands on speed.

Unique combination of screw cap and conical push-in stopper.

The Advanced Oak Ridge (AOR) system is an excellent choice for preparative centrifugation applications including protein purification, cell harvesting, pelleting applications, sterile centrifugation, extractions, density gradients and biohazardous applications.

The polypropylene sealing cap's inner conical plug has three self-seal pressure rings. They push against the inside of the tube neck, forming a triple contact seal which adds to the normal screw cap. The cap is constructed to support the tube's shoulder and neck during centrifugation. It includes a grip for easy extraction from the rotor bores. Tubes are of universal sizes and will fit rotors and adapters from all major centrifuge manufacturers.

Note: For biohazardous applications the use of optional o-rings is recommended as double seal for added safety benefits (included with all tubes with cap, except for 10 ml PPCO + PC and 30 ml PE).

PA Polyallomer PF Polyflor

® PC Polycarbonate

PPCO Polypropylene Copolymer PE Polyethylene

3.3. Advanced Oak Ridge

Tubes



page 17 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.3.2. Additional Information and Prices – Tubes complete with cap

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to ... rpm

Tested

up to ... x g

Units

per pack

25 24 01 10 ml 9.4 ml PC - AOR 24,000 57,960 10

25 24 11 10 ml 8.9 ml PPCO(PA) - AOR 24,000 57,960 10

25 24 41 10 ml 9.7 ml PE - AOR 18,000 32,600 10

25 24 51 10 ml 9.4 ml PF - AOR 20,000 40,250 2

25 29 51 30 ml 27.9 ml PC - AOR 24,000 64,397 10

25 29 61 30 ml 25.9 ml PPCO(PA) - AOR 24,000 64,397 10

25 29 65 30 ml 24.5 ml PE - AOR 10,000 11,180 10

25 29 71 30 ml 26.4 ml PF - AOR 24,000 64,397 2

25 32 01 50 ml 40.0 ml PC - AOR 24,000 69,549 10

25 32 11 50 ml 38.0 ml PPCO(PA) - AOR 24,000 69,549 10

25 32 15 50 ml 38.9 ml PE - AOR 12,000 17,387 10

25 32 21 50 ml 42.6 ml PF - AOR 18,000 39,121 2

25 32 41 80 ml 73.1 ml PC - AOR 20,000 50,086 10

25 32 45 80 ml 76.3 ml PPCO(PA) - AOR 20,000 50,086 10

25 32 47 80 ml 69.3 ml PE - AOR 12,000 18,031 10

25 32 49 80 ml 73.0 ml PF - AOR 15,000 28,174 2

PA Polyallomer PF Polyflor® PC Polycarbonate




Tubes



page 18 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.3.3. Additional Information and Prices – Tubes without cap

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to ... rpm

Tested

up to ... x g

Units

per pack

23 24 01 10 ml 9.4 ml PC - AOR 24,000 57,960 10

23 24 11 10 ml 8.9 ml PPCO(PA) - AOR 24,000 57,960 10

23 24 41 10 ml 9.7 ml PE - AOR 18,000 32,600 10

23 24 51 10 ml 9.4 ml PF - AOR 20,000 40,250 2

23 29 51 30 ml 27.9 ml PC - AOR 24,000 64,397 10

23 29 61 30 ml 25.9 ml PPCO(PA) - AOR 24,000 64,397 10

23 29 65 30 ml 24.5 ml PE - AOR 10,000 11,180 10

23 29 71 30 ml 26.4 ml PF - AOR 24,000 64,397 2

23 32 01 50 ml 40.0 ml PC - AOR 24,000 69,549 10

23 32 11 50 ml 38.0 ml PPCO(PA) - AOR 24,000 69,549 10

23 32 15 50 ml 38.9 ml PE - AOR 12,000 17,387 10

23 32 21 50 ml 42.6 ml PF - AOR 18,000 39,121 2

23 32 41 80 ml 73.1 ml PC - AOR 20,000 50,086 10

23 32 45 80 ml 76.3 ml PPCO(PA) - AOR 20,000 50,086 10

23 32 47 80 ml 69.3 ml PE - AOR 12,000 18,031 10

23 32 49 80 ml 73.0 ml PF - AOR 15,000 28,174 2

3.3.4. Closures for Advanced Oak Ridge Tubes


per pack

25 46 05 Sealing cap for 10 ml AOR Tubes made of PC and PPCO (PA)

25 24 01 25 24 11

10

25 46 06 Sealing cap for 10 ml PE AOR Tubes 25 24 41 10

25 46 08 Sealing cap for 10 ml PF AOR Tubes 25 24 51 1


25 29 51 25 29 61

10

25 46 16 Sealing cap for 30 ml PE-AOR Tubes 25 29 65 10

25 46 18 Sealing cap for 30 ml PF-AOR Tubes 25 29 71 1


25 32 01 25 32 11

10

25 46 26 Sealing cap for 50 ml PE-AOR Tubes 25 32 15 10

25 46 28 Sealing cap for 50 ml PF-AOR Tubes 25 32 21 1

25 46 35 Sealing cap for 80 ml AOR Tubes made of PC, PPCO (PA) and PE

25 32 41 25 32 45 25 32 47

10

25 46 38 Sealing cap for 80 ml PF AOR Tubes 25 32 49 1





Tubes



page 19 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.3.5. O-Rings for Advanced Oak Ridge Tubes


per pack

25 58 81 O-Ring for 10 ml AOR PE and PF 25 46 06 25 46 08

3

25 58 83 O-Ring for 30 ml AOR PPCO(PA) and PC 25 46 15 3

25 58 84 O-Ring for 30 ml AOR PF 25 46 18 3

25 58 85 O-Ring for 50 ml AOR PPCO(PA) and PC 25 46 25 25 46 26

3


25 58 87 O-Ring for 80 ml AOR PPCO(PA) and PC 25 46 35 3

25 58 88 O-Ring for 80 ml AOR PE 25 46 36 3


3.3.6. Adapter for Advanced Oak Ridge Tubes

Cat. No. Description Material Number of

Places For Rotor

Bores Units

per pack







Tubes



page 20 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.4.0. General Information

Overwind-protected and gas-tight

One-piece sealing cap with O-ring guarantees leak-proof seal

Maximum filling volume and maximum speed

Accessories that increase bottle lifespan

Available are high-speed centrifuge bottles with volumes of 200, 250, 290, 500, 650, 750 and 1000 ml for angle and swing-out rotors.

A special black polypropylene bottle which reduces UV light transmission is available for light-sensitive analyses such as fluorescent studies and work with retinal cells.

A wide neck bottle design with gently sloping shoulders allows easy decanting of supernatants without liquid hang-up and pellet disturbance. The cap provides neck support, preventing bottle collapse even after prolonged centrifugation. A polypropylene cover support ring increases the lifespan of the 500 ml bottle by providing extra support to the neck area during centrifugation. The cover support ring can also be used to facilitate opening and closing of the 250, 290 and 500 ml bottles.

Note: During an actual centrifugation run the cover support ring should only be used with the 500 ml bottles.

The one-piece polypropylene sealing cap with a well-embedded silicone o-ring provides a leak-proof seal and is interchangeable between the 250, 290, 500 and 1000 ml bottles. The cap is molded to match exactly the threads of the bottle and provides a leak-proof seal. A tight seal is guaranteed even at maximum speed.

Polypropylene pads are available for use with the 250 and 290 ml flat bottom bottles and the 250 ml round bottom bottles. The pads fill the gap that would exist between the bottle bottom and the rotor cavity, eliminating unnecessary stress and cold flow of the plastics in this area during the run.

3.4. Bottles



page 21 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.4.1. Ordering Information Bottom Support

Pads for rotor bores

250 ml 500 ml

Nominal Volume

Dimensions (mm)

Ø x Length

Material and Form

Cat. No. Bottles

complete

Cat. No. Bottles

Cat. No. Cap

Cat. No. O-Rings

(3 pieces per pack) Cat. No. Cat. No.

200 ml

200 ml

200 ml

200 ml

56 x 112

56 x 112

56 x 112

56 x 112

PC – CB/W

PC – FB/W

PPCO(PA) – CB/W

PPCO(PA) – FB/W

25 33 75

25 33 71

25 33 77

25 33 73

23 33 75

23 33 71

23 33 77

23 33 73

25 46 55

25 46 55

25 46 55

25 46 55

25 58 53

25 58 53

25 58 53

25 58 53

250 ml

250 ml

250 ml

250 ml

250 ml

250 ml

250 ml

250 ml

250 ml

250 ml

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

62 x 122

PC – FB/W

PC – RB/W

PE – FB/W

PE – RB/W

PF – FB/W

PF – RB/W

PP/black – FB/W

PPCO(PA) – FB/W

PPCO(PA) – RB/W

PP – RB/W

25 34 01

25 34 41

25 34 31

25 34 47

25 34 39

25 34 49

25 34 12

25 34 21

25 34 45

25 34 43

23 34 01

23 34 41

23 34 31

23 34 47

23 34 21

23 34 45

23 34 43

25 46 60

25 46 60

25 46 60

25 46 60

25 46 63

25 46 63

included

25 46 60

25 46 60

25 46 60

25 58 55

25 58 55

25 58 55

25 58 55

25 58 57

25 58 57

25 58 55

25 58 55

25 58 55

25 58 55

25 51 811

25 51 90

25 51 811

25 51 90

25 51 811

25 51 90

25 51 811

25 51 811

25 51 90

25 51 90

290 ml

290 ml

62 x 137

62 x 137

PC – FB/W3

PE – FB/W3

25 34 81

25 34 87

23 34 81

23 34 87

25 46 60

25 46 60

25 58 55

25 58 55

25 51 811

25 51 811

500 ml

500 ml

500 ml

500 ml

500 ml

70 x 165

70 x 165

70 x 165

70 x 165

98 x 114

PC – FB/W

PE – FB/W

PP/black – FB/W

PPCO(PA) – FB/W

PPCO(PA) – FB/W

25 35 012

25 35 312

25 35 122

25 35 212

25 35 51

23 35 01

23 35 31

23 35 21

23 35 51

25 46 60

25 46 60

included

25 46 60

25 46 60

25 58 55

25 58 55

25 58 55

25 58 55

25 58 55

directly

directly

directly

directly

AS 4.500 only

650 ml

650 ml

750 ml

750 ml

98 x 136

98 x 136

98 x 152

98 x 152

PC – FB/W

PP – FB/W

PC – FB/W

PPCO(PA) – FB/W

25 35 90

25 35 91

25 35 80

25 35 81

23 35 90

23 35 91

23 35 80

23 35 81

25 46 60

25 46 60

25 46 60

25 46 60

25 58 55

25 58 55

25 58 55

25 58 55

directly

directly

directly

directly

1,000 ml

1,000 ml

1,000 ml

1,000 ml

98 x 175

98 x 175

98 x 175

98 x 175

PC – FB/W

PC – FB/W + SR

PPCO(PA) – FB/W

PPCO(PA) – FB/W+SR

25 35 62

25 35 65

25 35 72

25 35 75

23 35 62

23 35 62

23 35 72

23 35 72

25 46 60

25 46 62

25 46 60

25 46 62

25 58 55

25 58 55

25 58 55

25 58 55

directly

directly

directly

directly

1 Bottom support pads not for use in all swing-out rotors and angle rotors

JA-14 (Beckman) and HFA-14.290 (Heraeus) and AF 6.250 + AF 8.250 (Herolab). 2 For safety reasons always use with cover support ring (Cat. No. 25 52 41).

Bottles cannot be used in rotor JA-10 (Beckman). 3 290 ml bottles do not fit in rotors AF 6.250 (Herolab) and

JA-14 (Beckman)


PPCO Polypropylene Copolymer FB Flat bottom G Graduated

PP Polypropylene RB Round bottom LC Loop cap

PE Polyethylene W Wide neck

PC Polycarbonate PF Polyflor® SR Support ring

3.4. Bottles



page 22 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.4.2. Additional Information and Prices – Bottles complete with cap

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to … rpm

Tested

up to … x g

Units

per pack

25 33 71 200 ml 186.0 ml PC – FB/W 10,000 16,323 6

25 33 73 200 ml 168.4 ml PPCO – FB/W 10,000 16,323 6

25 33 75 200 ml 179.0 ml PC – CB/W 10,000 16,323 6

25 33 77 200 ml 156.9 ml PPCO(PA) – CB/W 10,000 16,323 6

25 34 01 250 ml 232.5 ml PC – FB/W 14,400 33,847 6

25 34 12 250 ml 227.3 ml PP/black – FB/W 13,000 27,585 6

25 34 21 250 ml 225.1 ml PPCO(PA) – FB/W 14,400 33,847 6

25 34 31 250 ml 239.0 ml PE – FB/W 13,500 29,749 6

25 34 39 250 ml 231.6 ml PF – FB/W 12,000 23,505 2

25 34 41 250 ml 203.3 ml PC – RB/W 14,400 33,847 6

25 34 43 250 ml 213.3 ml PP – RB/W 14,400 33,847 6

25 34 45 250 ml 213.5 ml PPCO(PA) – RB/W 14,400 33,847 6

25 34 47 250 ml 213.5 ml PE – RB/W 13,500 29,749 6

25 34 49 250 ml 213.2 ml PF – RB/W 12,000 23,505 2

25 34 81 290 ml 273.5 ml PC – FB/W 14,400 33,847 6

25 34 87 290 ml 275.5 ml PE – FB/W 13,500 29,749 6

25 35 012 500 ml 432.1 ml PC – FB/W 10,500 20,560 6

25 35 122 500 ml 430.2 ml PP/black – FB/W 10,500 20,560 2

25 35 212 500 ml 432.1 ml PPCO(PA) – FB/W 10,500 20,560 6

25 35 312 500 ml 431.5 ml PE – FB/W 7,500 10,226 6

25 35 51 500 ml 503.0 ml PPCO(PA) – FB/W 5,200 5,290 4

25 35 90 650 ml 670.0 ml PC – FB/W 3 4,000 4,936 4

25 35 91 650 ml 668.0 ml PP – FB/W 3 4,000 4,936 4

25 35 80 750 ml 760.0 ml PC – FB/W 3 4,000 4,936 4

25 35 81 750 ml 762.0 ml PPCO(PA) – FB/W 3 4,000 4,936 4

25 35 62 1,000 ml 900.0 ml PC – FB/W 3 4,000 4,936 4

25 35 65 1,000 ml 900.0 ml PC – FB/W / SR 8,000 12,042 4

25 35 72 1,000 ml 887.0 ml PPCO(PA) – FB/W 3 4,000 4,936 4

25 35 75 1,000 ml 885.0 ml PPCO(PA) – FB/W SR 8,000 12,042 4 2 For safety reasons always use with cover support ring (Cat. No. 25 52 41).

Bottles cannot be used in rotor JA-10 (Beckman). 3 If used with Sealing cap/Support ring Combination (cat. no. 25 35 65) the max speed is 8,000 rpm in a fixed angle rotor.







3.4. Bottles



page 23 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.4.3. Additional Information and Prices – Bottles without cap

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Tested

up to … rpm

Tested

up to … x g

Units

per pack

23 33 71 200 ml 186.0 ml PC – FB/W 10,000 16,323 6

23 33 73 200 ml 168.4 ml PPCO – FB/W 10,000 16,323 6

23 33 75 200 ml 179.0 ml PC – CB/W 10,000 16,323 6

23 33 77 200 ml 156.9 ml PPCO(PA) – CB/W 10,000 16,323 6

23 34 01 250 ml 232.5 ml PC – FB/W 14,400 33,847 6

23 34 21 250 ml 225.1 ml PPCO(PA) – FB/W 14,400 33,847 6

23 34 31 250 ml 239.0 ml PE – FB/W 13,500 29,749 6

23 34 39 250 ml 231.6 ml PF – FB/W 12,000 23,505 2

23 34 41 250 ml 203.3 ml PC - RB/W 14,400 33,847 6

23 34 43 250 ml 213.3 ml PP - RB/W 14,400 33,847 6

23 34 45 250 ml 213.5 ml PPCO(PA) – RB/W 14,400 33,847 6

23 34 47 250 ml 213.5 ml PE - RB/W 13,500 29,749 6

23 34 49 250 ml 213.2 ml PF – RB/W 12,000 23,505 2

23 34 81 290 ml 273.5 ml PC - FB/W 14,400 33,847 6

23 34 87 290 ml 275.5 ml PE - FB/W 13,500 29,749 6

23 35 012 500 ml 432.1 ml PC - FB/W 10,500 20,560 6

23 35 212 500 ml 432.1 ml PPCO(PA) – FB/W 10,500 20,560 6

23 35 312 500 ml 431.5 ml PE - FB/W 9,000 14,725 6

23 35 51 500 ml 503.0 ml PPCO(PA) – FB/W 5,200 5,290 4

23 35 90 650 ml 670.0 ml PC - FB/W 4,000 4,936 4

23 35 91 650 ml 668.0 ml PP - FB/W 4,000 4,936 4

23 35 80 750 ml 760.0 ml PC - FB/W 4,000 4,936 4

23 35 81 750 ml 762.0 ml PPCO(PA) – FB/W 4,000 4,936 4

23 35 62 1,000 ml 900.0 ml PC - FB/W 4,000 4,936 4

23 35 72 1,000 ml 887.0 ml PPCO(PA) – FB/W 4,000 4,936 4 2 For safety reasons always use with cover support ring (Cat. No. 25 52 41).

Bottles cannot be used in rotor JA-10 (Beckman).







3.4. Bottles



page 24 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.4.4. Closures and Support Rings for Bottles


per pack

25 46 55 Sealing cap for 200 ml

25 33 71 25 33 73

25 33 75 25 33 77

6

25 46 60

Sealing cap for 250, 290, 500 und 1,000 ml

25 34 01 25 34 21 25 34 41 24 34 43 25 34 45 25 34 81

25 35 01 25 35 21 25 35 51 25 35 80 25 35 81 25 35 90 25 35 91 25 35 62 25 35 72

6

25 46 62 Combination (for 1,000 ml) Sealing cap with support ring 25 35 65 25 35 75 1

25 46 63 Sealing cap for 250 ml PF

25 34 39 25 34 49 1

25 52 41 Support ring for 500 ml cap and closing device for 250/290/500 ml

6

3.4.5. O-Rings for Bottle Sealing Caps


per pack

25 58 53 O-Ring for bottle sealing caps 200 ml 25 46 55 3

25 58 55 O-Ring for bottle sealing caps 25 46 60 3

25 58 57 O-Ring for bottle sealing caps (PF bottles) 25 46 63 3

3.4.6. Bottom Support Pads for Bottles


per pack

25 51 81

Bottom support pad for 250/290 ml FB

25 34 01 25 34 12 25 34 21 25 34 31

25 34 39 25 34 81 25 34 87

6

25 51 90

Bottom support pad for 250 ml RB

25 34 41 25 34 43 25 34 45

25 34 47 25 34 49

6


3.4. Bottles



page 25 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.5.1.1. Ordering Information – Tubes

Nominal Volume

Dimension (mm)

Ø x Length Material and Form

Cat. No. Tubes

Cat. No. Cap

Fits directly into these rotors:

2.0 ml 2.0 ml

8 x 51 8 x 51

PA - thin-walled PC - thick-walled

25 20 70 25 20 20

TFT 80.2, TST 60.2

4.4 ml 4.4 ml 4.4 ml

11 x 60 11 x 60 11 x 60

PA - thin-walled PC - thick-walled PC - thick-w. w. thread

25 21 40 25 21 50 25 22 20

25 46 94

TFT 80.4, TST 60.4 SW 60Ti, SW 56Ti

5.0 ml 5.0 ml 5.0 ml

13 x 51 13 x 51 13 x 51

PA - thick-walled PA - thin-walled PC - thick-walled

25 22 60 25 21 90 25 22 40

TST 55.5, AH-650, SW 65 SW 55Ti, SW 50.1, SW 50

SW 39, TLA 100-3

6.5 ml 6.5 ml 6.5 ml 6.5 ml

13 x 64 13 x 64 13 x 64 13 x 64

PA - thick-walled PA - thin-walled PC - thick-walled PC - thick-w. w. thread

25 23 50 25 23 40 25 22 80 25 22 90

25 46 91

TFT 45.6 50.4Ti, 50.3Ti, 40.3

13.2 ml 13.5 ml 13.5 ml 13.5 ml

14 x 89 16 x 76 16 x 76 16 x 76

PA - thin-walled PA - thin-walled PC - thick-walled PC - thick-w. w. thread

25 23 90 25 24 30 25 24 80 25 24 90

25 46 88

TST 41.13, SW 41Ti

TFT 80.13, TFT 75.13, TFT 65.13 TFT 60.13, TFT 50.13, TFT 32.13

80Ti, 75Ti, 70.1Ti, 65, 50Ti, 40, SW 36

14.0 ml 14.0 ml 17.0 ml 17.0 ml

14 x 95 14 x 95 16 x 102 16 x 102

PA - thin-walled PC - thick-walled PA - thin-walled PC - thick-walled

25 23 60 25 25 60 25 26 20 25 26 40

TST 41.14, SW 40Ti

TST 28.17, AH-629 SW 27.1, SW 28.1

38.5 ml 38.5 ml 38.5 ml 38.5 ml

25 x 89 25 x 89 25 x 89 25 x 89

PA - thick-walled PA - thin-walled PC - thick-walled PC - thick-w. w. thread

25 30 60 25 30 50 25 30 40 25 30 20

25 46 85

TFT 70.38, TFT 65.38, TFT 55.38 TFT 50.38, TST 28.38, AH-629

70Ti, 60Ti, 55.2Ti, 30.2Ti 42.1, SW 27, (SW 28 without lid)

94.0 ml 94.0 ml 94.0 ml

38 x 102 38 x 102 38 x 102

PA - thick-walled PC - thick-walled PC - thick-w. w. thread

25 32 60 25 32 80 25 32 90

25 46 82 TFT 45.94, 45Ti, 35

3.5.1.2. Ordering Information – Ultra-Centrifuge Bottle with Delrin closure and Neopren ring for ultra-rotors TFA 20.250 and Type 19

Nominal Volume

Dimension (mm)

Ø x Length

Material and Form (with closure)

Cat. No. Bottle

complete

Cat. No. Bottle

only

Cat. No. Cap

Cat. No. O-Rings

(3 pieces per pack)

250 ml 60 x 122 PA - FB/W 25 34 25 23 34 25 25 46 65 25 58 65

Note: This ultra-centrifuge bottle has other dimensions than a high-speed bottle with the same

volume. Hence they will not fit the bores of high-speed rotors and vice versa.

PA Polyallomer FB Flat bottom W Wide neck

PC Polycarbonate RB Round bottom

3.5. Ultra

Centrifuge Tubes

and Bottle



page 26 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.5.2.1. Additional Information and Prices – Tubes without cap

Cat. No. Tube

Nominal Volume

Filling Volume

Material and Form

Speed

max ... rpm (cpltly. filled)

Former Kontron No.

Units

per pack

25 20 20 2.0 ml 0.6 ml PC - th i ck -wa l le d 45,000 91-90289 50

25 20 70 2.0 ml 1.3 ml PA - th in -w a l l ed 80,000 91-90288 50



25 22 20 4.4 ml 2.7 ml PC - t h i c k - w . w . t h r e a d 50,000 91-90275 50



25 22 60 5.0 ml 3.4 ml PA - th i ck -wa l le d 50,000 91-90223 50







25 24 70 13,5 ml 8.5 ml PA - th in -w a l l ed 45,000 91-90203 50













25 32 90 94.0 ml 88.0 ml PC - t h i c k - w . w . t h r e a d 40,000 91-90237 25 Tubes were tested at 4°C for 24 hours. Since there are many factors that may influece the performance characteristics and lifespan of centrifuge tubes the information given above has been compiled as a general guideline but, in no case, expresses absolute guarantee of a product in a laboratory situation.

3.5.2.2. Additional Information and Prices – Bottle

Cat. No. Bottle

Nominal Volume

Filling Volume

Material and Form

Speed

max ... rpm (cpltly. filled)

Former Kontron No.

Units

per pack

23 34 25 250 ml 191.5 ml PA - FB/W without cap 20,000 6

25 34 25 250 ml 191.5 ml PA - FB/W complete with cap 20,000 91-90460 6

PA Polyallomer FB Flat bottom W Wide neck

PC Polycarbonate RB Round bottom

Attention: Kindly note packaging sizes for your orders

3.5. Ultra

Centrifuge Tubes

and Bottle



page 27 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.5.3. Closures for Ultra-Centrifuge Tubes and Bottle

All closures are overwind-protected and gas-tight.

Cat. No. Description Fits for: Former

Kontron No.

Units

per pack

25 46 65 Sealing cap fur UC bottle 25 34 25 1

25 46 82 Screw cap for 94 ml 25 32 90 96-00131 1

25 46 85 Screw cap for 38.5 ml 25 30 20 96-00130 1

25 46 88 Screw cap for 13.5 ml 25 24 90 96-00129 1

25 46 91 Screw cap for 6.5 ml 25 22 90 96-00151 1

25 46 94 Screw cap for 4.4 ml 25 22 20 96-00165 1

3.5.4. O-Rings for Ultra-Centrifuge Tubes and Bottle

Cat. No. Description Fits for: Former

Kontron No.

Units

per pack

25 58 65 O-Rings for UC bottle 25 34 25 3

25 59 00 O-Ring for screw cap – 94 ml 25 46 82 34-80035 1

25 59 05 O-Ring for screw cap – 38.5 ml 25 46 85 34-80034 1




3.5.5. Other accessories for Ultra-Centrifuge Tubes

Cat. No. Description Former

Kontron No.

Units

per pack

25 49 00 Extractor Tool for UC tubes 92-00108 1


3.5. Ultra

Centrifuge Tubes

and Bottle



page 28 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



3.6.1. Accessories

Cat. No. Description Units

per pack

25 80 20 Extractor tool for 50 ml with rim 1

25 81 20 Extractor tool for bottom support pads 1

25 81 60 Extractor tool M4 1


25 80 70 Cleaning brush for all rotors 50 ml 1

25 80 80 Cleaning brush for all rotors 14/15/16 ml 1

25 80 90 Cleaning brush for all rotors 250/290 ml 1

25 80 60 Rotor stand for all rotors with conical bore (e. g. for Sorvall etc.)

1


3.6. Other

Access-ories



page 29 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



Volume

approx. Ø in mm of

Rotor Bore x

max. length

The tubes will fit into the next larger sized rotor with adapters from all manufacturers. Swing-out Rotors are listed without the bucket resp. adapter numbers. Manufacturers not listed have in most cases an identical size of the rotor compartments. The given information is as accurate as possible. Errors or incompleteness could be contained. Herolab is not responsible for any damage caused by the given information. Herolab reserves the right to modify any part without prior notice.

10 ml 16.1 x 80 Herolab AFH 20.180 or AF 20.10 Sigma 12111, 12141, 12157 and 12168 Beckman JA-21, JS-24.15, F1010 and S0410

30 ml 25.3 x 92 Sigma 12139, 12158 and 12172 Beckman JS-24.38, F0630 Hermle 220.76 V02, 220.76 V03 and 221.10 V02

50 ml 28.7 x 103

Herolab AF 8.50.1, A 8.24, AF 8.50.2, A 12.17, AS 4.7 and AS 4.13 Sigma 12150, 12156 and 12160 Jouan AK(L) 50.22, AK(L) 50.17 and FAJ-20C Sorvall SS-34, SA-300, SA-600, F-28/50, A-500, A/S-400, LA/S-400, SL-50RT, HB-4 and HB-6 Beckman JA-20, JA-12, JA-17, JA-25.50, JA-30.50Ti, JS-13, JS-13.1, F0650, F0850 and TA-14-50 Fiberlite F21(B,S or J)8x50(y) and F18(B,S or J)12x50(y) Hermle 220.80 V02, 220.80 V03 and 221.22 V01

80 ml 38.1 x 105

Herolab AFH 6.180 or AF 6.94 (6.80), A 8.20 and AS 4.13 Sigma 121559, 12159 and 12165 Jouan AG 100.18, AG 100.14, AK(L) 100.21, SWK 100.13 and SWG 100.9 Sorvall SA-800 Beckman JA-18, F0485, F0685 and FX6100 Fiberlite F20(B,S or J)6x100 Hermle 220.78 V02, 220.78 V03, 221.18 V01 and 221.20 V01

200 ml 56.5 x 112 Herolab ASH 4.055, AS 4.500 or TS 4.200 Sigma 11133, 11140, 11150, 11156, 11180, 11650, 11800 and 11801

250 ml 61.8 x 122

Herolab AF 6.250, AF 8.250, A 6.14, AFH-4.090 and AS 4.7 Sigma 11150, 11180, 11650, 11800, 11801, 12256 and 12258 Jouan AG 290.9, AK(L) 250.14 and FAJ-14C Sorvall GSA, SLA-1000, SLA-1500, SLC-1500, H-1000B, RTH-250, H-2000B and HS-4 Beckman JA-14, JLA-16.250, TA-10.250, JS-7.5 and SX4250 Fiberlite F14(B,S or J)6x250(y) and F16(B,S or J)4x250(y) Hermle 221.21 V01, 221.08 V01 and 221.15 V01

290 ml 61.8 x 137

Herolab A 6.14 Sorvall GSA and SLA-1500 Jouan AG 290.9 and AK 250.14 Beckman JA-14, JLA-16.250 and JS-7.5

500 ml 69.5 x 165

Herolab AF 6.500, AF 8.500 and A 6.9 Sigma 11150, 11650, 11800, 11801, 12500 and 12505 Jouan FAJ-10C and AK(L) 500.11 Sorvall GS-3, SLA-3000, SLC-3000 Beckman JLA-10.500 Fiberlite F10(B,BA,S or J)6x500(y) and F12S6x500y

500 ml 97.5 x 114 Herolab AS 4.500

650 ml 97.5 x 136 Herolab AS 4.750 Sigma 11650, 11800 and 11801

750 ml 97.5 x 152

Herolab AS 4.750 Sigma 11650, 11800 and 11801 Sorvall SH-3000, TTH-750 and RTH-750 Beckman JS-4.3 SX4750 SX4750A Hermle 220.70 V06

1000 ml 97.5 x 175

Herolab AF 4.1000, AF 6.1000 and AS 4.1000 Sigma 12510, 11800 and 11801 Sorvall SLC-4000, SLC-6000, HL-4, HG-4L, H-4000, H-6000 Beckman JS-4.0 Fiberlite F(7S,8B, 9B,9S,9J)4x1000y, F6(B,S or J)6x1000y and F8(B,BA,S or J)6x1000y Hermle 220.70 V05

4. Compati-bility with

rotors of other

manufac-turers



page 30 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02



Cat. No. Item Units per pack

23 24 01 Tubes 10 ml PC-AOR without screw cap 10

23 24 11 Tubes 10 ml PPCO-AOR without screw cap 10

23 24 41 Tubes 10 ml PE-AOR without screw cap 10

23 24 51 Tubes 10 ml PF-AOR without screw cap 2













23 33 71 Bottles 200 ml PC-FB without screw cap 6

23 33 73 Bottles 200 ml PP-FB without screw cap 6

23 33 75 Bottles 200 ml PC-CB without screw cap 6

23 33 77 Bottles 200 ml PPCO-CB without screw cap 6


23 34 21 Bottles 250 ml PPCO-FB without screw cap 6

23 34 25 Bottles 200 ml PA-FB/W UC without screw cap 6

23 34 31 Bottles 250 ml PE-FB without screw cap 6

23 34 39 Bottles 250 ml PF-FB with screw cap 2

23 34 41 Bottles 250 ml PC-RB without screw cap 6

23 34 43 Bottles 250 ml PP-RB without screw cap 6

23 34 45 Bottles 250 ml PPCO-RB without screw cap 6

23 34 47 Bottles 250 ml PE-RB without screw cap 6

23 34 49 Bottles 250 ml PF-RB with screw cap 2













25 10 10 Tubes 3 ml Duran Glass. RB 10

25 10 20 Tubes 5 ml Borex Glass, RB 10

25 10 40 Tubes 10 ml Duran Glass, RB 10

25 10 60 Tubes 10 ml Duran Glass, C/G 10

25 10 91 Tubes 15 ml HS Glass, RB 6



25 11 41 Tubes 30 ml HS Glass, RB 6




25 20 00 Tubes 1.0 ml PS-RB / pck. with 1.000 pieces 1000

25 20 20 Tubes 2.0 ml PC thick-walled UC / pck. with 50 pieces 50



page 31 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02




25 20 50 Tubes 1.5 ml PP-CB with lid (Eppendorf) / pck. with 1.000 pieces 1000

25 20 70 Tubes 2.0 ml PA thin-walled UC / pck. with 50 pieces 50




25 22 00 Tubes 5.0 ml PS-RB / pck. with 1.000 pieces 1000

25 22 20 Tubes 4.4 ml PC thick-walled with thread UC / pck. with 50 pieces 50

25 22 30 Tubes 4.5 ml PP-RB / pck. with 1.000 pieces 1000


25 22 60 Tubes 5.0 ml PA thick-walled UC / pck. with 50 pieces 50







25 24 01 Tubes 10 ml PC-AOR with screw cap 10

25 24 11 Tubes 10 ml PPCO-AOR with screw cap 10


25 24 41 Tubes 10 ml PE-AOR with screw cap 10

25 24 51 Tubes 10 ml PF-AOR with screw cap 2




25 25 70 Tubes 14 ml PC-RB 10

25 25 80 Tubes 14 ml PP-RB 10

25 25 90 Tubes 14 ml PF-RB 2

25 26 10 Tubes 13.0 ml PP-RB 10



25 26 60 Tubes 14 ml PE-RB 10

25 26 90 Tubes 14 ml PA-RB 10

25 27 00 Tubes 16 ml PC-RB/FL 10

25 27 20 Tubes 16 ml PPCO-RB/FL 10

25 27 40 Tubes 16 ml PE-RB/FL 10

25 27 51 Tubes 16 ml PF-RB/FL 2









25 30 90 Tubes 70 ml PC-RB/G 10

25 31 00 Tubes 50 ml PC-RB/FL 10

25 31 05 Tubes 50 ml PC-RB/FL with Loop Cap 10

25 31 30 Tubes 50 ml PE-RB/FL 10

25 31 45 Tubes 50 ml PPCO-RB/FL with Loop Cap 10

25 31 51 Tubes 50 ml PF-RB/FL 2

25 31 60 Tubes 50 ml PPCO-RB/FL 10

25 31 90 Tubes 70 ml PP-RB 10





page 32 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02








25 32 47 Tubes 80 ml PEC-AOR with screw cap 10





25 33 00 Tubes 100 ml PC-RB/G 2

25 33 10 Tubes 120 ml PP-RB 10

25 33 20 Tubes 100 ml PC-RB/G 10

25 33 71 Bottles 200 ml PC-FB with screw cap 6

25 33 73 Bottles 200 ml PPCO-FB with screw cap 6

25 33 75 Bottles 200 ml PC-CB with screw cap 6

25 33 77 Bottles 200 ml PPCO-CB with screw cap 6


25 34 12 Bottles 250 ml PP black FB with screw cap 6


25 34 25 Bottles 200 ml PA-FB/W UC with screw cap 6

25 34 31 Bottles 250 ml PE-FB with screw cap 6

25 34 39 Bottles 250 ml PF-FB with screw cap 2

25 34 41 Bottles 250 ml PC-RB with screw cap 6

25 34 43 Bottles 250 ml PP-RB with screw cap 6

25 34 45 Bottles 250 ml PPCO-RB with screw cap 6

25 34 47 Bottles 250 ml PE-RB with screw cap 6

25 34 49 Bottles 250 ml PF-RB with screw cap 2




25 35 12 Bottles 500 ml PP black-FB with screw cap 2



25 35 51 Bottles 500 ml PPCO-FB with screw cap (for rotor AS 4.500 only) 4


25 35 65 Bottles 1000 ml PC-FB with screw cap and support ring 4


25 35 75 Bottles 1000 ml PPCO-FB with screw cap and support ring 4


25 35 81 Bottles 750 ml PP-FB with screw cap 4


25 35 91 Bottles 650 ml PP-FB with screw cap 4

25 45 50 Cap for tubes 14 ml PA + 16 ml PPCO. PC 10

25 45 51 Cap for tubes 14 ml PE + 16 ml PE 10

25 46 00 Cap for tubes (Loop Cap) for tubes 50 ml FL 10

25 46 05 Cap for AOR tubes 10 ml PC. PPCO 10

25 46 06 Cap for AOR tubes 10 ml PE 10

25 46 08 Cap for AOR tubes 10 ml PF 1










page 33 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02






25 46 50 Rubber cap for glass tubes 10

25 46 55 Screw cap for bottles 200 ml 6

25 46 60 Screw cap for bottles 250. 290 . 500. 1000 ml 6

25 46 62 Screw cap for bottles 1000 ml with support ring (black) 1

25 46 63 Screw cap for bottles 250 ml PF 1

25 46 65 Screw cap for bottles 250 ml PA UC 1

25 46 82 Screw cap, aluminum, for UC tubes 94 ml 1

25 46 85 Screw cap, aluminum, for UC tubes 38.5 ml 1




25 49 00 Extractor tool for UC tubes 1

25 50 00 Adapter 50 ml Rotor bore / 4 x 1 ml 2

25 50 05 Adapter 2.2 ml Rotor bore / Micro tubes 0.25-0.4 ml / Pck. with 6 pieces 6

25 50 06 Adapter 2.2 ml Rotor bore / Micro tubes 0.5-0.7 ml / Pck. with 6 pieces 6

25 50 07 Adapter 2.2 ml Rotor bore / Micro tubes 0.2 ml PCR / Pck. with 6 pieces 6

25 50 10 Adapter 50 ml Rotor bore / 2 x 1.5 ml Eppendorf 2

25 50 11 Adapter 50 ml Rotor bore / 2 x 4.5/5 ml 2

25 50 30 Adapter 50 ml Rotor bore / 1 x 10 ml AOR 2

25 50 50 Adapter 50 ml Rotor bore / 1 x 16 ml 2

25 50 61 Adapter 50 ml Rotor bore / 1 x 30 ml AOR 2

25 50 62 Adapter 50 ml Rotorbore Falcon / 1x 30 ml AOR 2





25 50 90 Adapter 250 ml Rotor bore / 15 x 3 ml glass tubes 2

25 51 00 Adapter 250 ml Rotor bore / 9 x 4.5/5 ml plastic tubes or 5 ml glass tubes 2

25 51 10 Adapter 250 ml Rotor bore / 9 x 10 ml glass tubes (Ø 13 mm) 2

25 51 30 Adapter 250 ml Rotor bore / 5 x 16 ml plastic or 12/15 ml glass tubes (Ø 18 mm) 2

25 51 35 Adapter 250 ml Rotorbore / 5 x 15 ml Falcon 2


25 51 70 Adapter 250 ml Rotor bore / 1 x 100/120 ml (Ø 40 mm) 2

25 51 75 Adapter 250 ml Rotorbore / 1x Falcon 50 ml 2

25 51 81 Adapter (Bottom Pad) 250 ml Rotor bore / 1 x 250/290 ml bottles FB 6

25 51 90 Adapter (Bottom Pad) 250 ml Rotor bore / 1 x 250/290 ml bottles RB 6


25 52 41 Support ring for bottles 500 ml / Closing device for bottles 250. 290. 500 ml 6

25 53 80 Adapter 50 ml Falcon / 1 x 15 ml Falcon 2



25 55 40 Adapter 50 ml Rotor bore / 1 x 10 ml glass tubes with conical bottom 4




25 56 00 Adapter 16 ml Rotor bore / 1 x 10 ml glass tubes (Ø 13 mm) 4


25 58 00 Adapter (Bottom Pad) 50 ml Rotor bore / 1 x 45 ml glass tubes 4

25 58 10 Adapter (Bottom Pad) 250 ml Rotor bore / 1 x 200 ml glass tubes 4

25 58 20 Adapter (Bottom Pad) 16 ml Rotor bore / 1 x 12/15 ml glass tubes (Ø 18 mm) 4



page 34 of 34

Laborgeräte GmbH




CENTRIFUGE LABWARE

2014-02




25 58 53 O-Ring for screw caps of bottles 200 ml / pck. with 3 pieces 3

25 58 55 O-Ring for screw caps of bottles 250. 290. 500. 1000 ml / pck. with 3 pieces 3

25 58 57 O-Ring for screw caps of bottles 250. 290. 500. 1000 ml PF 3

25 58 65 O-Ring for screw caps of bottles 250 ml PA UC / pck. with 3 pieces 3

25 58 81 O-Ring for AOR tubes 10 ml PE. PF / pck. with 3 pieces 3

25 58 83 O-Ring for AOR tubes 30 ml PPCO. PC / pck. with 3 pieces 3

25 58 84 O-Ring for AOR tubes 30 ml PF / pck. with 3 pieces 3




25 58 88 O-Ring for AOR tubes 80 ml PE / pck. with 3 pieces 3


25 59 00 O-Ring for screw cap. aluminum for UC tubes 94 ml 1

25 59 05 O-Ring for screw cap. aluminum for UC tubes 38.5 ml 1




25 80 20 Extractor tool for tubes 50 ml with FL 1


25 80 60 Rotor stand for all rotors with conical bore 1

25 80 70 Cleaning brush for all rotors 50 ml 1

25 80 80 Cleaning brush for all rotors 14/15/16 ml 1

25 80 90 Cleaning brush for all rotors 250/290 ml 1

25 81 20 Extractor tool for bottom support pad 1




Documents

Centrifuge Labware