• Convenient front activation panel with 10 programmable push button standard (expandable).

• Two-way operation alsoconfigurable for one way.

• Enhanced operation available by adding our CompuLertTM

Graphic User Interface software and work station with Windows 2000/XP.

• Use as stand-alone encoder with printer for two-way activation and status feedback.

• Compatible with FSK, DTMF and TTS siren decoder controllers

• Communicates with ASC’s RTU (Remote Terminal Unit) that can control and monitor

voice or motor sirens aswell as interface to interior

building voice systems, (Mass Notification Systems)

for emergency notification.

• Battery back-up and non- volatile memory for uninterupted operation during AC failures.

• Easy “plug and play” installation designed for desktop or rack mount for easy dispatch console integration.

FEATURES

4801 W. Woolworth Ave ¥ Milwaukee, WI 53218

CENTRAL CONTROL STATIONCSC-960TM

The CSC-960TM encoder combines maximum flexibility with convenience of operation for new or existing

“Outdoor Warning Siren Systems” as well as interfacing to interior Mass Notification Systems used for

emergency warning. Use it as a stand-alone unit, or in multiple-controller arrangements of a 1-way or 2-way

control system. Compatible with both DTMF or digital FSK data-tone protocols, it may be used to upgrade

your existing equipment, or as a controller for your new warning system. For enhanced operation, connect

the CSC-960TM to a new or existing PC using a Windows operating system.

Designed with mounting in mind, the CSC-960TM is easily installed on a desktop, in a 19” rack-mount

configuration, or integrated into an existing dispatch console to conserve space.

The CompuLertTM CSC-960TM configuration is determined by the feature set you need as well as the number

of RTUs required for sirens and building system interface. For 2-way systems with up to 15 sirens, the

CSC-960TM and printer will provide critical status information relating to the operational status of the warning

siren equipment. Beyond 15 sirens, the PC Windows adjunct is generally more suitable. For large systems, or

where communities require the benefit of enhanced control system(s) features, an operator work station can

be provided to include the powerfulCompuLertTM software for “automatic event” report generation, and other

convenient features. Now the CSC-960TM will also upload and download (all) command sequences from the

PC or operate independently of the PC, when simple, fast, push button activation only is required.

Installation and operation is easy! Just plug it in to any 110 VAC, 60 Hz service outlet, connect it to your radio

transmitter, turn on the power, and push the tone-signal/siren(s) button(s) to activate the equipment. The

CSC-960TM comes standard with battery back-up and should AC power fail, it will remain operational for a

minimum of eight hours. The CSC-960TM also provides continuous operation despite operator workstation failure.

Command and Control System

CompuLertTM CSC-960

• More than 25 years of field use, reliability and experience.

• Dispatcher-friendly, easy-to- use, drop down menus with point-and-click operation throughout.

• Customized interactive (quality color presentation) maps with color-coded siren icons, provide visual display of siren status and emergency signal activation.

• Proven reliability with user- defined system testing, polling, and status reporting.

• Trouble detection alarms notify operator(s) of impending danger due to equipment degradation or failure.

• “Minimum Transmit Time” testing quickly frees up shared radio frequencies for other emergency communication use.

• Robust digital FSK encode/ decode protocol for premium level of security and assured operation - even in the most difficult of environments.

• Can interface with DTMF or TTS for compatibility with other existing equipment.

• Compatible with any siren equipment.

• Control redundancy provided with battery back-up from the CSC-960 encoder Access from any authorized PC using remote acccess communication software.

• Windows 2000/XP compatible.

FEATURES

4801 W. Woolworth Ave ¥ Milwaukee, WI 53218

INDUSTRY LEADERCompuLertTM

CompuLertTM is the recognized industry

leader in data telemetry computing of two-

way “Outdoor Warning Siren” activation and

monitoring equipment. With nearly 25 years

of experience, it excels in meeting community,

industrial, and nuclear safety application

needs. CompuLertTM continues to be the

choice of customers who are serious about

public safety.

We enjoy excellent, long-term relationships with our customers.

The feedback we have received over the years has served as the

building blocks of CompuLert’sTM powerful and leading-edge

features and options. For example, from a “dropdown”

programmable menu, you can easily energize any combination of

over 3,000 individually addressable digital universal controllers for

sirens, interfaces to interior systems, tone-alert radios, and weather

stations. When specific area notification is required, choose from

1 to 99 programmable groups, or an individual siren.

User programmable pre-scheduled testing and polling are easily

accomplished from the programming menu. Just select the date,

time(s) of day, and number of times per month you wish to run

tests. Select from up to nine interactive maps, ranging from

county-wide to individual community map views - perfect for

county systems where dispatchers activate sirens for their

community.

Multiple tone signals, live P.A., and pre-recorded messages are

easily activated from CompuLert’sTM control equipment,

enhancing the performance of any electromechanical or

electronic siren system.

Each CompuLertTM Telemetery System Consists of:1. CompuLertTM Windows compatible software

2. Digital Universal Siren Controllers

3. CSC-960TM Encoder 4. Optional RTU Interface controllers for interfacing to interior voice warning systems thereby providing coordinated information “inside and outside”

We challenge you to compare our sirens & control systems with any manufacturer’s!

• Pre-recorded messages Mass Notification, Music, Bugle Calls, Live PA

• Highly configurable for directional or Omni- directional sound propagation

• 400 Watts per Speaker Spun Aluminum Speaker Horns with high-tech powder coating to resist harsh environments

• Stackable Speaker Array

• Standard or custom tone selection

• Silent Test feature facilitates regular testing while

minimizing disruption to the community

• Battery Operated with Solar Option available

• Fully integrated wired and wireless control and status monitoring

• Maintenance free siren array

FEATURESE-CL

ASS

HIGH POWEREDE-Class

The latest in innovative emergency notification products from ASC.Developed with over 25 years of alerting and voice notificationexperience, the E-Class is a high powered configurable voice/siren.

The E-Class high powered voice/sirens are fully configurable fora wide range of alert signal tones as well as highly intelligiblepre-recorded or live voice directions for community, industry,or DOD Mass Notification applications.

ASC can also provide all electronic control components such asthe Siren Control, (Telephonic - or - Radio - or Satellite) Decoder(optional), and Power Service Disconnect pre-wired at the factory.This factory wiring maximizes efficiency and accuracy, resulting inreduced installation time and cost.

Siren Design Characteristics

The E-Class has been designed based on requirements of the DOD’s UFC for Mass Notification Systems.

The E-Class series of Emergency alerting products areused for the notification of the public or staff/personnelduring severe weather situations, hazardous material incidents, and otherdisaster scenarios including military facilityattack, terrorism incidents and amber alerts.

The E-Class can be connected to your personal computer and monitored from anywhere with the addition of one of ourCompuLertTM graphic user interfaceoptions. Our expert team can customcreate an Early Warning or MassNotification System to suit your specificneeds and maximize life saving potential.

Learn more at:

www.AmericanSignal.com

Customize our systems to your specifications

HIGH POWEREDE-CLASS

SIGNAL FORMATS FREQUENCY OF OPERATION SWEEP RATE

ALERT

ATTACK

HI/LO

AIR-HORN

FIRE

GROWL

HAZARD

CHIME

WAIL

steady tone

tone ramping up & down, 06 up & 05 down

tone alternating with a 740 Hz tone

on/off tone

tone ramping up & down, minimum during down ramp

tone burst with fade up & down

tone ramping up

tone bursts

tone ramping down, then back up

3 minutes

6 sec. up 5 sec. down for 3 min.

0.75 sec duration per tone for 3 min.

2 sec. on, 2 sec. off for 3 min.

16 sec. up, 8 sec. down for 1.5 min.

0.5 sec. (for siren test)

1 sec. repeating for 3 min.

2 sec. intervals of 6 cycles

0.8 sec. down, 0.2 sec. up, for 3 min

Operating Voltage 24 VDC

Input Current (Utility) 10 amp

Duty Cycle 30min

Battery Standby Duration 21 days

Battery Charger Voltage (Input) 120 VAC

Operation Temperature -40ºC to 60ºC

Storage Temperature -60ºC to 125ºC

Humidity 0%-100% (non-condensing)

Wind Speed 140 Mph

Environmental

Control Cabinet with Battery 48”x24”x8” 60”x24”x8”

Siren Dimensions (HxDia)

Siren Weight

Size and Weight EC 1-4 EC 4-8

Acoustical Characteristics

EC-1 400W horn (90º) (1) direction 121dB (c)

EC-2 800W horn (180º) (1) level 121dB (c)

EC-3 1200W horns (270º) (1) level

EC-4 1600W horns (360º) (1) level

EC-5 2000W horns (multiple config.) 121-126 dB (c)

EC-6 2400W horns (multiple config.)

EC-7 3000W horns (multiple config.)

EC-8 3200W horns (360º) (2) levels 126 dB (c)

Rating

SYSTEM SPECIFICATIONS

Electrical

121dB (c)

121dB (c)

121-126 dB (c)

121-126 dB (c)

22”Hx53”Dia 44”Hx53”Dia

225lbs 370lbs

Control Weight 200lbs 220lbs

E-Class 1600 Watt Control System

E-Class 3200 Watt Control System

INSTALLATIONFor maximum sound dispersion, sirensshould be mounted 45’ - 55’ on awooden, steel, or concrete pole.A pole mount is available for astandard wooden utility pole. The center mount, low silhouette siren design eliminates the need for support wires. The siren can also be mounted on proper structures such as roofs, towers, etc. Mounting brackets for these applications and additional installation accessories are available from American Signal.

FIELD PROGRAMMINGEach electronic control includes anRS-232 port for field programming oftones and time duration. The 6 customprogrammable tones can be softwareprogrammed to generate almost anytone or tone sequence. MACROs,customized tones and pre-recordedmessages in repeat play cycles, and new tones, can be field programmedas your needs change.

TESTINGModels EC1 - EC8 produce 121 up to126 decibels respectively, tested in freefield non-reflective measurementenvironments with repeat results.

We challenge you to compare our sirens & control systems with any manufacturer’s!

• Rotational directional design, 360º coverage

• No maintenance on siren head EVER!

• System can be configured for AC operation , DC operation, or True UPS backup

• Direct Drive Rotation Design eliminates chains and belts that will fail and require

maintenance

• Factory sealed motor bearings eliminates maintenance

• Stainless Steel Hardware with a 5 year parts warranty

• UL Listed

• Screened air intake and output.

FEATURES

4801 W. Woolworth Ave ¥ Milwaukee, WI 53218

Siren Design Characteristics

Customize our systems to your specifications

TEMPESTTM

T-128

The T-128 siren utilizes aluminum sound- producing components which are covered in color-impregnated fiberglass to eliminate rusting and painting maintenance.

Sirens are mounted directly overthe center mounting poles so thatguy wires are not required.

TempestTM sirens can be connected to your personal computer and monitored from anywhere with the addition of one of ourCompuLertTM graphic user interfaceoptions. Our expert team can customcreate an Early Warning or MassNotification System to suit your specificneeds and maximize life saving potential.

TE

MP

EST

T-1

28 ASC’s many years of experience in the warning system industry since 1942 has culminated with the advent of the TempestTM line of the most reliable and coverage effective sirens on the market to date.

Available in low-cost AC operation, DC battery pack operation, and True UPS design with AC power as the main supply source and DC battery backup in the event of a power failure.

The TempestTM T -128 is designed to be maintenance free. Many composite components are used to reduce or eliminate the damaging effects of harsh environmental conditions. All ASC high powered siren systems are constructed using stainless steel hardware.

ASC can also provide all control components such as the siren control, radio decoder (optional), and service disconnect to one mounting channel which is pre-wired at the factory. The mounting configuration reduces field installation mistakes as well as installation time and cost.

Please E-mail us atContactUs@americansignal.com

to learn more!

*All dBs are NOT CREATED

EQUAL!

500Hz ADVANTAGE

Learn more at:

www.AmericanSignal.com

T-121 at 70db

INSTALLATIONFor maximum sound dispersion, sirensshould be mounted 45’-55’ above grade.An optional pole mount is available formounting the poles on a standard wooden utility pole. The center mount,low silhouette siren design eliminatesthe need for support wires. The siren canalso be mounted on proper structuressuch as roofs, towers, etc. Mountingbrackets for these applications andadditional installation accessories are available from American Signal.

TEMPESTTM

T-128

AC Control Cabinet

180 lbs.

T-128 at 70dB*

2.16 miles

1.87 miles

1.44 miles

- Competitor F Rotational Siren ASC’s T-128

1.44 miles

0.96 milesHilly

Average

Flat

1.24 miles

Pricing and specifications are subject to change without notice. Decibel ratings meetANSI-S-12.14-1992 and IOS 3746 specifications, and were produced under ideal weather test conditions. Actual decibel ouput may very depending on site-specificvariables, including weather. Systems should be designed accordingly.

Acoustical Characteristics

Tempest T-128 129 dB avg. @100 ft.130.9 dB peak @100 ft.

Output Frequency 500 Hz

AC Power Voltage 240/120 Vac 40/20 Amp 50/60 Hz

Operational Voltage 48 v DC

AC Control 40 Amp Service AC

Battery Charge Current

Duty Cycle 30 min.

Battery Standby Duration 21 Days

Operation Temperature -40ºC to 60ºC

Storage Temperature -65ºC to 125ºC

Humidity 0%-100% (non-condensing)

Wind Speed 150 Mph

Rating

SYSTEM SPECIFICATIONS

Electrical

Environmental

LxHxW 59 1/2”x65”x57”

180 lbs.

Siren Weight

Size and Weight

DC Control Cabinet 210 lbs.

Steady Tone, 3 minutes

Wailing Tone, 6 sec. Hi / 6 sec. Low, 3 minutes

Wailing Tone, 16 sec. Hi / 8 sec. Low, 4 Cycles

STANDARD 3 SIGNAL FORMATALERT

ATTACK

FIRE

275 lbs.

TM