Central Changing of Triggers in WinCC V6.2 Images (PDL) Www.otomasyonegitimi.com

8/2/2019 Central Changing of Triggers in WinCC V6.2 Images (PDL) Www.otomasyonegitimi.com

1/10

SIEMENS AG I&S IS E&C PS 2

Central changing of triggers in

WinCC V6.2 images (PDL)

Content

Requirements Overview of the basic functions Functions

oSearch tags & change trigger cyclesoSearch tag list & change trigger cyclesoSearch trigger cycle and replace trigger cycleoSearch tag list and a certain trigger cycle and

replace trigger cycle

oSearch all triggers and create logfiles

Contact

Competence Center WinCC Nrnberg Siemens AG Seite 1 / 10


2/10


Requirements

Hardware

The minimum requirements of the WinCC Version stated below

are valid.

Please note:

The faster the CPU of the PC, the faster many images can be

edited!

Software

Windows XP SP2

Windows 2003 SP1 & R2

WinCC V6.2

Important hints:

Back up your WinCC project or the WinCC images before using

the Trigger Tool for the first time. The images are being saved

while editing and you cannot undo this procedure.

The WinCC project must be opened in the WinCC Explorer.

If there are already images during installation, select unchange

so that you can still use your new version.



3/10


Overview of the basic functions

General functions:

- It is either possible to search in all WinCC images or in the image that is currentlyopen in the Graphics Designer.

- A logfile can be created with every change to document the changes.



4/10


Function 1: Search Tag & Change Trigger cycle

A tag used as trigger can be searched in all WinCC images or in the actively open

WinCC image. If this tag is found as tag trigger, the cycle can be changed.

Function 2: Search Tag list & Change Trigger cycle

A tag used as tag list can be searched in all WinCC images or in the actively open

WinCC image. The cycle can be changed if one of the tags in the list is found as tag

trigger. There has to be a *txt. file of the tag list. The tag names are listed one below

the other in this text file.

Funktion 3: Search Trigger cycle und replace Trigger cycle

It is possible to search a trigger cycle in all WinCC images or in the actively open

WinCC image. The cycle can be changed if the trigger cycle is found.

Function 4: Search Tag list with a certain Trigger

cycle and replace Trigger cycle

It is possible to search a trigger cycle and a taglist in all WinCC images or in the

actively open WinCC image. The cycle can be changed if the trigger cycle is found inconnection with a tag in the tag list.

Function 5: Search all triggers and create Logfile

It is possible to search triggers in all WinCC images or in the actively open WinCC

image. They are documented in a logfile by stating the image, the object, the property

and the dynamization.



5/10


Function 1

Search Tag & Change Trigger cycle

Press InsertTag and select the tag. Select the target trigger in the selection dialog box. Select if all images or the one that is currently open need to be searched. Select if a logfile needs to be created. Change Trigger to start the process!



6/10


Function 2Search Tag List & Change Trigger cycle

Press Select Tag List and select the text file with the tag names that have to be searched. Select the target trigger in the selection dialog box. Select if all images or the one that is currently open need to be searched. Select if a logfile needs to be created. Change Trigger to start the process!



7/10


Function 3Search Trigger cycle and replace Trigger cycle

Select the trigger cycle in the first selection dialog box. Select the target trigger in the second selection dialog box. Select if all images or the one that is currently open need to be searched. Select if a logfile needs to be created. Change Trigger to start the process!



8/10


Function 4Search Trigger cycle and replace Trigger cycle

Select the trigger cycle in the first selection dialog box. Press Select Tag List and select the text file with the tag names that have to be searched. Select the target trigger in the second selection dialog box. Select if all images or the one that is currently open need to be searched. Select if a logfile needs to be created. Change Trigger to start the process!



9/10


Function 5Search all triggers and create logfiles

Select if all images or the one that is currently open need to be searched. Press Find all Triggers to start the process.



10/10


Contact

Siemens AGIndustrial Solutions and ServicesI&S IS E&C PS 24Schreiberhauer Strasse 390475 Nrnberg, GermanyTel.: +49 911 895-2492

Ansprechpartner:

Norbert Wagner

[email protected] [email protected] [email protected] Center:[email protected]

mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]

Documents

Central Changing of Triggers in WinCC V6.2 Images (PDL) Www.otomasyonegitimi.com