Cenius Leaflet

8/9/2019 Cenius Leaflet

1/5

Cenius

1

CeniusCenius


2/5


3/5

Cenius

5

Operational steps

Loosening and mixing Levelling and crumbling

Concave discs arranged in two rows

The spiral spring tines arranged in three rows in the

main frame provide the even incorporation of straw

residue into the soil surface. The line spacing of only

230 mm allows for full area work even on dry and hard

soil.

Tine spacings of 750 mm within and between the rows

provide good blockage free material flow.

Two kinds of spiral spring tines are available, depen-

ding on the local conditions. The 35 mm square

steel tines of the Cenius Special are suitable for light

to medium soils with less stones and for heavy, stony

soils the 45 mm round steel tines of the Cenius

Super are used.

Spring tines Rubber sprung mountings for the safe depth guidance

Square steel tines

Vario-Clip quick tine change system without tools and ingeniously simple

The share carrier is firmly fixed on the spiral spring

tine, the share body allows the simple exchange with-

out tools.

Narrow share50 mm

Universal share110 mm

Stubble share170 mm

Stubble share220 mm

For varying site conditions with frequent tine change

the use of the Vario-Clip quick tine change system is

recommended.

Stubble-, inversion- or narrow shares

for any kind of use the right coulter type

The Cenius mulch cultivator can be equipped with

different shares. Available, depending on the range of

operation and working depth, stubble shares, inver-

sion shares and narrow shares. The 170 mm wide

stubble share is especially suited both for shallow

stubble working and also for seed bed preparation

in spring season. The 75 mm wide inversion share

should be used for the even and intensive straw mixing

in medium soil layers. For the top soil deep loosening

after harvest, for example root crop, the 50 mm wide

narrow share is available.

Stubble share170 mm

Inversion share75 mm

Narrow share75 mm

An excellent levelling of the worked soil horizon is

the pre-condition for an even re-consolidation pro-

vided by the concave discs arranged in two rows.

Fixing the individual discs on sprung rubber moun-

tings allow for individual soil adaptation and yet, at

the same time, is the best protection against over-

load. Of course, the disc bearings are maintenance-

free. With the aid of square eccentric pins the disc

gangs can be set centrally to different operational

intensities. Adjustable side discs ensure the clean

matching to the next bout.

Disc arranged in two gangs Telescopic side disc

Face seal builtin conical seats

Gear oil fill

2 x cast ringswith gliding plane

2 x O-ring

2-row angularcontact ball bearing

Bearings with integrated face sealMaintenance-free disc bearings

reliable and comfortable!

No daily greasing thanks to the maintenance-free disc

bearings. The integrated face seal provides the discs

with absolute robustness and longevity even in toug-

hest operational conditions.

5


4/5

Cenius

7

Re-consolidation and depth guidance Implement setting made easy!

Not too much and not too little

re-consolidation in strips with the wedge ring roller

Depth and disc row adjustment without tools

Wedge ring rollers provide the re-consolidation in

strips the best pre-condition for an even emergence

of volunteer grain. The open and less re-consolidated

strips in between ensure the gaseous exchange and

allow the passage of rain. In this way the danger of

capping is prevented. Depending on tractor sizes two

sizes of wedge ring rollers are offered.

The program with the wedge ring roller KW 580 is

supplemented by the somewhat lighter wedge ring

roller KW 520.

Alternatively available for light soils and soils with

stagnant water problems:

the alternative open cage roller.

Quick working depth setting without tool via square

eccentric pins on the main frame. Clear scales serve as

a guide. Working depth from 5 to 20 cm are possible.

In addition the mounting position of the following roller

can be changed for top soil deep loosening in depth

of about 25 cm. For crumbling and levelling also the

position of the disc gangs is set centrally and without

tools via square eccentric pins.

7

KW 520 wedge ring roller

Wedge ring roller with tine harrow

the powerful combination for the spring season

The tine harrow (option) behind the wedge ring roller provides additio-

nal crumbling and the perfect levelling of the soil surface the ideal

starting conditions for sugar beet or maize.

During operation the tine harrow is put into a slight vibration. Coarse

clods remain on the surface preventing capping even in heavy rainfall.

The fine soil is moved into the range of the seed bed.

s two

is

ring

with

KW 580 wedge ring roller

SW 520 open cage roller

Setting of the disc depthSetting of the total working depth

From the practician for the practician!Cenius in profi-Test (Edition 02/05) Cenius on its way to genius

Stability and finish

.... at the first sight the Cenius leaves a robust

impression ....

.... the choice of shares, the wedge ring roller and

the finish are plus points ....

Handling

.... the setting of the side discs is examplary ....

.... the very good operators manual also mentions

axle loads, tyre carrying capacity and ballasting on the

tractor ....

Operational quality

.... the inversion share is made for the shallow and

deep soil tillage ....

.... the 4 cm to 6 cm deep full area, shallow stubble

working was possible with the wing shares without

any problem ....

.... the operational performance of the Cenius

could fully convince no matter whether in shallow

or deep operation ....

Maintenance

.... there are only two grease nipples ....

In the following ranges the Cenius can show its strengths: (excerpts and quotes from the original text)

Re-consolidation


5/58

Technical data

MI 1967 (GB) 08.08

Printed in Germany www.amazone.de www.amazone.co.uk E-Mail: [email protected]

AMAZONEN-WERKE H. DREYER GmbH & Co. KG P. O. Box 51 49202 Hasbergen-Gaste / Germany

Telefon +49 (0)5405 501-0 Telefax +49 (0)5405 501-193

Technical data

Cenius

Descriptions, illustrations and technical data are not binding and subject to change without prior notice!

Cenius 3001 Special Cenius 3001 Super

Working width 3,00 m 3,00 m

Operational speed > 10 km/h

Number of tines 13 13

Tine type square steel tines 35 mm round steel tines 45 mm

Number of discs 8 8

Disc diameter 460 mm 460 mm

Power requirement from 100 KW / 140 HP 100 KW / 140 HP

Transport width 3,00 m 3,00 m

Weight 1900 kg 2100 kg

Cenius at home in conservation and

conventional systems

Stubble working Cenius

Conservation establishment systems from stubble working to sowing

Soil tillage Cenius

Sowing for example KG with AD-P Super



Stubble working Catros Soil tillage Cenius

Conventional establishment systems from stubble working to sowing

Stubble working Cenius Soil tillage Plough

Documents

Cenius Leaflet