Celtic Building And Forest Brochure

Call 914-665-8864

Commericial

Residential

BUILDING & FOREST PRODUCTSBUILDING SUPPLIES

BUILDING SUPPLIES

BUILDING SUPPLIES

Call Drywall Expert Dave Rosenthal at 914 665 8864

BUILDING PRODUCTS

• Drywall• Drywall Steel• Insulation• Ceiling Tile• Ceiling Grid• Rigid Insulation• Housewrap• GreenGlass

FOREST PRODUCTS

• Plywood Sandard- AC/BC/AB Sheathing CD+ Underlayment - Subflooring OSB - Waterboard, Advantech Fir

• MDF - Ultralight • Lauan • Wiggle • Marine • T1-11 Siding • Fire Retardant • Pressure Treated

Boards1x2 -5/4x12, Pine - Clears & Commons, Hardwoods - S2S, S4S, RWRL, Pressure Treated, Fire Retardant

PLYWOOD

• Sanded- AC/BC/AB• Sheathing CDX• Underlayment - Subflooring• OSB - Waferboard, Advantech• Fir & Pine• Hardwoods - Birch, Oak, Cherry, Walnut (Architectural)• Forming - HDO, MDO

Timbers3x and larger - Numerous species

LUMBER

Dimensional 2x4 -2x12 - Doug Fir, Hem Fir, Spruce, KD, Green, HT, #2, #3, Pressure Treated, Fire Retardant

ABUSEDurability is a top priority in many environments, both to keep people safe and to reduce lifecycle costs for repairs and renovations. Different environments require different levels of abuse resistance. For example, while the school gym might only require protection from a dodgeball game, a hospital corridor might require protection from surface damage caused buy wheelchairs and gurneys.

ACOUSTICSSound control refers to the ability to attenuate or absorb sound passing through a partition floor or ceiling assembly. Depending on the function of the space, acoustical needs can be broken down into sound control between spaces, sound control within a space, and listening efficiency within a space. Performance ratings for sound control allow construction of wall, floor and ceiling assemblies that complement the purpose of the space.

AESTHETICSAppearance can define a space, establish an identity and increase productivity. While the building architecture is the most obvious definitive statement about aesthetics, smaller interior details such as levels of finish, corner treat-ments, and decorative interior finish systems can help make that statement consistent throughout.

FIREBecause a building’s occupants need as much time as possible to evacuate in case of a fire, it is critical to use fire-tested assemblies that comply with regulatory requirements to delay the spread of the fire from one area to another.

MOISTUREMicroscopic mold particles are found everywhere in our environment, but mold cannot grow with out moisture. By controlling moisture, you can prevent the growth of mold in the most cost effective way possible. Although suitable project condition during storage and installation should be the first line of defense in preventing mold, products that are water-resistant can help.

SUSTAINABILITY The green building movement has become more important to building owners and architects alike. Celtic strives in its effort to protect the environment, using industrial by-products and recycled products rather than virgin materials whenever possible.

We’ve outlined six

performance criteria

that are important for

contractors to take

into account when

selecting and

ordering materials.

BUILDING SUPPLIES

BUILDING SUPPLIES

BUILDING SUPPLIES

Call 914-665-8864 Call 914-665-8864

BUILDINGPRODUCTS

DRYWALL DRYWALL STEEL

INSULATION RIGID INSULATION

HOUSEWRAP EZY JAMB

FOAM KITS

Fomo’s products were created for the professional market. Fomo’s products are an excellent choice in commercial and industrial construction and repair, which have excellent air and moisture barrier properties. Fomo’s products are also used for sound deadening in commercial buildings due to their acoustical properties.

Commercial/Industrial InsulationHandi-Foam® Sealants are used to seal and stop air infiltration in small gaps and voids. Handi-Foam® Spray Foams can be used for full wall insu-lation or to fill large areas.

Commercial Roofing ApplicationsHandi-Foam® Spray Foams may be used in commercial roofing as a night seal against weather. It is also used for patch and repair for polyurethane roofs to insulate against heat loss.

NEW

FIRE BARRIERFIRESTOP FOAM

DOORS & HARDWARE

Call 914-665-8864 Call 914-665-8864

ACCESS DOORS

It’s all about what you can’t see.Stealth Access Panels are glass fiber reinforced gypsum ceiling access panels that are aesthetically

pleasing, because they are designed to blend seamlessly into a drywall ceiling. No longer do you

have to hide your attic and utility access in the closet. Stealth Access Panels come in models for

residential and commercial applications, with two residential and four commercial sizes. Residential

models incorporate a gasket seal to provide an energy-saving seal to keep attic temperatures from

infiltrating the living space. Stealth panels are perfect for jobs where access is required at regular

intervals. The panels can be used in new and retrofit construction. The unit consists of a surround

frame with pre-drilled fastener holes and a drop-in door.

PRODUCT FEATURES◗ Tapered edge for tape joint ◗ Blends into surrounding drywall

◗ Easily textured ◗ No shrinkage

◗ Lightweight ◗ No cracking

◗ Smooth round edge ◗ Perfect for retrofit applications

◗ Single trade installation ◗ Reduce labor costs

Residential

Hospitality

Commercial

Retail

It’s all about what you can’t see.

PRODUCT FEATURES>

>

>

>

>

>

>

>

>

>

LIGHTING PANELS

No More Replacement Ceiling Tiles.Eliminate mold &mildew forever!

Now Available at Celtic! Call Dave Rosenthal at 914 665 8864

CEILING TILES

SUSPENSION SYSTEMS

RESIDENTIAL

HOSPITALITY

COMMERCIAL

RETAIL

A permanent, more attractive solution to everyday lay-in ceiling problems. 100% Waterproof ceiling tiles - perfect for public buildings, health care, schools, hotels and much more. Especially effective for moist and humid environments.

Specify SpectraTileTM to Save!Specify SpectraTileTM to Save!

SAMPLE # PATTERN RATING*

04-2686 Finalé, Millennium, Mystique, Repertoire 10



Test Report (ASTM D 3273)

Product Comparison Chart

All patterns in-stock in 2’ X 2’ and 2’ X 4’ sizes.

*Rating scale 10- Indicates a film totally absent of disfigurement by mold/mildew or bacterial growth undermicroscopic examination.

100% WaterproofNo water damage or staining

Non-absorbent, no swelling, bowing or rotting

Will not harbor bacteria

Mold and mildew resistant

Decorative and FunctionalAvailable in four patterns, two sizes

May be pressure washed or scrubbed

Class-A Flame SpreadLife Safety Code: Passed 10.2.3.7.3

Cost EffectiveSpectraTile has an extended product life, 10 year warranty

Permanent replacement solution

Improve and reduce your overhead

Virtually maintenance free

“Investing in SpectraTile has been one of

the best maintenance saving decisions

I made.”Restaurant Proprietor

“A worry-free ceiling tile that enhances

looks AND functionality!”

Hotel Facility Manager

“My asthma symptoms improved after

my husband installed SpectraTile in

our house.”Home Owner

“Nothing else works better, lasts longer,

and improves my interior designs.”

Architect

Perfect Score for ASTM Mold Resistance Test


Class-A Flame Spread

Finalé

Mystique Repertoire

Millennium
































Architect




Finalé

Mystique Repertoire

Millennium
































Architect




Finalé

Mystique Repertoire

Millennium
































Architect




Finalé

Mystique Repertoire

Millennium
































Architect




Finalé

Mystique Repertoire

Millennium








Cost E�ectiveSpectraTile has an extended product life, 10 year warranty


























NEW NEW

Call 914-665-8864 Call 914-665-8864

FINALLY, A FAST,SIMPLE WAY TO BUILD WALLS.PANELS + TAPE=NO HOUSEWRAP

CALL ZIP SYSTEM SPECIALIST DAVE ROSENTHAL AT 914 665 8864

ZIP System® wall sheathing has a built-in, water-resistive barrier that lets you say good-bye to housewrap forever.

Simply install the panels, tape the seams, and you have a complete structural wall system and a water resistive barrier all-in-one.ZIP System wall combines the strength and stability of a high-performing panel with the enhanced weatherability provided by the product’s water-resistive barrier.

What makes it superior?Eliminates housewrap • Built-in water-resistive barrier eliminates housewrap for fast, easy installation

Built-in, water-resistive barrier won’t blow off or tear• Once the system is installed, no rework, no hassles• Give homes a high-quality appearance during construction

Water resistance• Built-in barrier protects home during and after construction and eliminates the risk of trapped water between housewrap and sheathing

Air resistance• Built-in barrier controls drafts, which promotes energy efficiency

Moisture breathability• ZIP System Wall panel and barrier are specially engineered to allow the ZIP System walls to breathe

Peace of mind •ZIP System wall panels are backed by a 15-year system warranty* and 30-year panel warranty.*

Call 914-665-8864 Call 914-665-8864

New GreenGlass® fiberglass-faced gypsum sheathing provides the mold and moisture resistance to

protect your next project from the elements and an unmatched level of recycled content to contribute green credits too. Developed for use in commercial and residential applica-tions under a broad range of exterior veneers including brick, stone, metal, wood and vinyl as well as EIFS and curtainwall systems,

GreenGlass also adds structural strength, fire resistance and a warranty for up to 12 months of exposure in normal weather conditions*. It is available in 1⁄2" and 5⁄8" thicknesses, a 48" width and lengths of 8,' 9,' 10,' and 12'. Plus, it’s lighter and easier to handle than other glass-faced gypsum sheathings. GreenGlass is the glass mat-faced gypsum that offers the most benefits in your project’s construction process and contributes the most value toward environmental certification.

Strong glass-faced gypsum performance and unmatched green system contributions in one sheathing.

*for GreenGlass warranty details, visit our website.

Tough as expected. Green as it gets.

Performance Equal To The Highest Expectations. Recycled Content That Sets A Whole New Standard.

New GreenGlass® fiberglass-faced gypsum sheathing provides the mold and moisture resistance to

protect your next project from the elements and an unmatched level of recycled content to contribute green credits too. Developed for use in commercial and residential applica-tions under a broad range of exterior veneers including brick, stone, metal, wood and vinyl as well as EIFS and curtainwall systems,

GreenGlass also adds structural strength, fire resistance and a warranty for up to 12 months of exposure in normal weather conditions*. It is available in 1⁄2" and 5⁄8" thicknesses, a 48" width and lengths of 8,' 9,' 10,' and 12'. Plus, it’s lighter and easier to handle than other glass-faced gypsum sheathings. GreenGlass is the glass mat-faced gypsum that offers the most benefits in your project’s construction process and contributes the most value toward environmental certification.

Strong glass-faced gypsum performance and unmatched green system contributions in one sheathing.

*for GreenGlass warranty details, visit our website.


Performance Equal To The Highest Expectations. Recycled Content That Sets A Whole New Standard.

Call 914 665 8864Ask for Drywall expert David Ferris

www.templeinland.com 800-424-2311

Tough as Expected. Green as it Gets. GreenGlass® gypsum sheathing features an enhanced gypsum core sand-wiched between naturally mold- and moisture-resistant fiberglass-mat facer. This provides excellent exposure durability for up to 12 months.★ In addition, the unmatched recycled content of GreenGlass can contribute valuable credits to LEED and other green-building system certifications.

Mold and Moisture ResistanceGreenGlass is produced with the TemShield® Mold Protection System engineered into its gypsum core and is faced on both sides with naturally mold-resistant fiberglass mats. It scored a 10, the highest value possible, when tested in accordance with ASTM D3273, the standard test for mold resistance. Its water absorption of less than 10 percent was tested in accordance with ASTM C473.

Note: The ASTM D3273 lab test may not be applicable to the actual performance of building materials. No material may be labeled mold proof, and resistance to mold growth depends on many factors. Prolonged exposure to moisture may cause mold and mildew to grow on any surface. Therefore, in order to maximize the mold and mildew resistance of a material, it is essential that good design, handling and construction practices be implemented. This involves avoiding water exposure during all phases of storage, handling, shipping, installation and after installation is complete. See GA-238 for more information.

Weather Resistive BarrierGreenGlass gypsum sheathing has been shown to resist water penetration when tested in accordance with ASTM E331. Install using rubberized asphalt tapes with a minimum 4" width (MFM Window Wrap, Fortiflash or Protectowrap) to seal all exposed joints and penetrations.

Note: Some local codes for water-resistive barriers require sealing of joints and fasteners with reinforced tape combined with a flexible joint treatment. Refer to your local building code, the weather-resistive barrier manufacturer’s installation instructions, as well as project design specifications.

Building Code ApprovalGreenGlass gypsum sheathing is manufactured to comply with ASTM C1177. As such, it conforms to IRC R702.3 and IBC 2506.2. For the acceptance of gypsum sheathing as structural wall bracing, refer to IRC R602.10.3 and IBC 2506.2. Please consult your local building code.

InstallationGreenGlass should be installed in accordance with ASTM C1280, ASTM C840 and/or GA-253, GA-216.

Fire Resistance of 5⁄8" Type X PanelsGreenGlass fire-resistant gypsum sheathing has been tested in accordance with ASTM E119 and therefore may provide a fire-resistance rating of one or more hours, depending upon the assembly in which it is applied. Please visit our website for a listing of over 140 U.L.-approved assemblies and design details or contact your Temple-Inland representative for details.

Note: Because ASTM procedures require that fire tests be conducted on com-plete building assemblies/systems and not just on the gypsum board itself, the ability of any particular gypsum board to pass a specific ASTM fire test may well depend on factors other than the fire-resistance of the gypsum board being tested. These factors include the other components used to construct the build-ing system being tested, the manner in which the system is constructed and the inherent variability of ASTM fire tests.

TyPICAl PRoPERTIES1⁄2" 5 ⁄8"**

Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square

Weight 1.70 lb./Sq. ft. 2.30 lb./Sq. ft.

Water Absorption1 < 10% < 10%

Permeability2 (Perms) > 27 > 22

Flame Spread3 0 0

Smoke Developed3 0 0

Humidified Deflection1 2⁄8" Max 1⁄8" Max

Flexural Strength1 80 / 100 100 / 140

Combustibility Non Non

Weather Resistive Barrier4 Pass Pass

www.templeinland.com ▲ 800-231-6060

©2009 TIN, Inc. Temple-Inland, GreenGlass and TemShield are registered trademarks of TIN, Inc. CS 2044.2 01/09

ISO 14021

RECyClEd ConTEnT CERTIFICATIon

GreenGlass is certified in accordance with ISO 14021 standards to have at least 90% recycled content on a dry weight basis.

lEEd-nC ConTRIBuTIon

The use of GreenGlass can contribute toward credits in these two LEED-NC certification categories:

MR credit 4.1 - Recycled Content - specifies that 10% of all materials on a project contain recycled content. Contribution is based upon recycled percentage of product.

MR credit 5.1 - Locally Produced Materials - specifies that 10% of all materials on a project are extracted and manufactured within 500 miles of the project.

**5 ⁄8" complies with UL designs and requirements for Type X products.1 ASTM C473; 2 ASTM E96; 3 ASTM E84; 4 ASTM E331

CAUTION: GreenGlass contains glass fibers. See our website for more important details on handling to avoid contact and inhalation of these fibers.

★LIMITED WARRANTY: Temple-Inland offers a 12-month weather-exposure warranty on GreenGlass fiberglass-faced gypsum sheathing subject to the terms, conditions and exclusions described on our website.

Call 914 665 8864Ask for Drywall expert David Ferris www.templeinland.com 800-424-2311











Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021










Call 914-665-8864 Call 914-665-8864

By the numbers, GreenGlass® gypsum board can help you set a higher standard in designing comfortable, efficient environ-ments – and building “green.”

Not only did GreenGlass score a perfect 10, the top value possible for mold protection, it’s also made up of the highest level of recycled content out there…at least 90%. And that’s where the real story is. GreenGlass is unmatched in the industry. It can contribute valuable credits to LEED and other green building standards and

give you a serious advantage towards environ-mental certification. Whether your project is residential or commercial, GreenGlass is a flexible, cost-efficient material choice for the wall, ceiling and dimensional accents of a structure’s working/living spaces, common areas, access passages and mechanical/storage rooms. Top ratings in mold and moisture resistance plus the highest recycled content available in a fiberglass-faced gypsum board…now that’s what we call a perfect score.

You do the math… top performance plus high green value equals 100% satisfaction.


A perfect 10 in mold protection. A record 90% in recycled content.









Interior performance. Outstanding opportunities.

The demand for green building is growing…and it’s here to stay. GreenGlass® delivers the perfect combination of mold protection and recycled content that’ll satisfy the most demanding project requirements. Engineered with improved fiberglass encapsulation for a smoother surface and improved finishability over traditional glass mat gypsum boards, GreenGlass is also easier to handle and install. It provides the interior performance you expect – with green building benefits that’ll surprise you.

Mold and Moisture ResistanceGreenGlass is ideal for higher moisture areas where paper-faced board is not an option. Produced with the TemShield® Mold Protection System engineered into its gypsum core, GreenGlass is faced on both sides with naturally mold-resistant fiberglass mats. It scored a 10, the highest value possible when tested in accordance with ASTM D3273, the standard test for mold resistance. Its water absorption of less than 10 percent was tested in accordance with ASTM C473.

Note: The ASTM D3273 lab test may not be applicable to the actual performance of building materials. No material may be labeled mold proof, and resistance to mold growth depends on many factors. Prolonged exposure to moisture may cause mold and mildew to grow on any surface. Therefore, in order to maximize the mold and mildew resistance of a material, it is essential that good design, handling and construction practices be implemented. This involves avoiding water exposure during all phases of storage, handling, shipping, installa-tion and after installation is complete. See GA-238 for more information.

Fire Resistance of 5⁄8" Type X PanelsGreenGlass gypsum board has been tested in accordance with ASTM E119 and therefore may provide a fire-resistance rating of two or more hours, depending upon the assembly in which it is applied. Please visit our website for a complete list of U.L.-approved assemblies and design details or contact your Temple-Inland representative.


TYPIcal PROPeRTIes1⁄2" 5 ⁄8"**

Width 48," 54" 48," 54"

Lengths 8', 10', 12' 8', 10', 12'

Edge Tapered Tapered


Product Standards ASTM C1396, ASTM C1658

ASTM C1396, ASTM C1658

Application Standards ASTM C840, GA 216 ASTM C840, GA 216

Flame Spread2 0 0





ISO 14021

RecYcled cOnTenT ceRTIFIcaTIOn


leed-nc cOnTRIbuTIOn




naHb GReen buIldInG sTandaRd

GreenGlass also contributes toward N.A.H.B. National Green Building Standard credits in the following certification category:

NAHB 604.1(2) - Pre-Consumer Recycled Content – specifies the use of recycled content products in major areas such as walls, floors, insulation and roofing.

**5 ⁄8" complies with UL designs and requirements for Type X products.1 ASTM C473; 2 ASTM E84


LIMITED WARRANTY: Temple-Inland offers a 6-month limited warranty on GreenGlass fiberglass-faced gypsum board subject to the terms, conditions and exclusions described on our website.













Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021










Call 914-665-8864 Call 914-665-8864














Not only do new GreenGlass® fiberglass-faced gypsum liner panels provide maximum protection

against mold, moisture, fire and unwanted noise – their unsurpassed level of recycled content can also contribute valuable credits to LEED and other green-building system certifications. Available in a one-inch thick-ness, a two-foot width and lengths to 12 feet, GreenGlass is designed for use in

elevators and mechanical/electrical shafts, stairwells and area separation walls. Its tough performance properties make it ideal for multi-family, townhomes, hospitals, offices, warehouses…basically any environ-ment where protection is a priority. This addition to our GreenGlass product line is durable, versatile and sets a whole new standard for recycled content and green building. Now, that’s what we call elevated product benefits.

Undeniable perfor-mance and unrivaled green building credits in one glass-faced gypsum liner panel.

Delivering elevated fiberglass protection and the highest level of recycled content




performance you can bank on. Green building credits that add up. GreenGlass® is like no other glass-mat shaftliner or area separation wall panel out there. The high recycled content of GreenGlass is unmatched in the industry and contributes valuable credits to LEED and other green-building system certifications. Featuring an enhanced gypsum core sandwiched between naturally mold- and moisture-resistant fiberglass-mat facers, GreenGlass provides the excellent protection and durability you count on – plus an exposure warranty for up to 12 months.*

Mold and Moisture ResistanceGreenGlass is produced with the TemShield® Mold Protection System engineered into its gypsum core and is faced on both sides with naturally mold-resistant fiberglass mats. It scored a 10, the highest value possible when tested in accordance with ASTM D3273, the standard test for mold resistance. Its water absorption of less than 10 percent was tested in accordance with ASTM C473.


Manufacturing StandardsGreenGlass liner panels are manufactured to comply with Federal Specification SS-L-30D, Type IV, Grade X, Class 1 and ASTM C1396 and ASTM C1658. GreenGlass is third-party certified by Underwriters Laboratories.

Fire ResistanceGreenGlass liner panels have been tested in accordance with ASTM E119 and therefore may provide a fire-resistance rating of two or more hours, depending upon the assembly in which it is applied. Please visit our website for a complete list of U.L.-approved assemblies and design details or contact your Temple-Inland representative.


TypiCAL pRopeRTieS

Thickness 1"

Panel Sizes 2' x 8,' 2' x 10,' 2' x 12'Edge Double beveled

Weight 4.1 lb./sq. ft.

Water Absorption1 < 10%

Flame Spread2 0

Smoke Developed2 0

Flexural Strength1 80 / 230

Combustibility Non

ReCyCLed ConTenT CeRTiFiCATion


Leed-nC ConTRibUTion




nAHb GReen bUiLdinG STAndARdS

GreenGlass also contributes greatly toward N.A.H.B. Green Building Standard credits in the following certification category:

NAHB 604.1(2) - Pre-Consumer Recycled Content – specifies the use of recycled content products in major areas such as walls, floors, insulation and roofing.

1 ASTM C473; 2 ASTM E84


★WARRANTY: Temple-Inland offers a limited 12-month exposure warranty on GreenGlass liner panels subject to the terms, conditions and exclusions described on our website.













Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021





















Width 4' 4'

Lengths 8', 9', 10', 12' 8', 9', 10', 12'

Edge Square Square




Flame Spread3 0 0








ISO 14021










Call 914-665-8864 Call 914-665-8864

FOREST PRODUCTS

PLYWOOD• Sanded- AC/BC/AB

• Sheathing CDX

• Underlayment - Subflooring

• OSB - Waferboard, Advantech

• Fir & Pine

• Hardwoods - Birch, Oak, Cherry,

Walnut (Architectural)

• Forming - HDO, MDO

• MDF - Ultralight

• Lauan

• Wiggle Board

• Marine

• T1-11 Siding

• Fire Retardant

• Pressure Treated

CELTIC TIP Specifying the wrong plywood can be costly. If in-doubt call plywood expert David Rosenthal at 914 665 8864.

Call 914-665-8864 Call 914-665-8864

SALES OFFICE: 10925 DAVID TAYLOR DRIVE, SUITE 300, CHARLOTTE, NC 28262

TELEPHONE: 800.933.9220 | FACSIMILE: 704.547.9228

FLAT OUT

FOR A QUIET, STIFF FLOORBEST

EXPECT NOTHING BUT THE BEST FROM ADVANTECH® FLOORING TO DIMINISHFLOOR SQUEAKS, BOUNCE AND MOISTURE-RELATED CONSTRUCTION DELAYS,RESULTING IN A QUALITY BUILD AND SATISFIED HOMEOWNER.

SUPERIOR MOISTURE RESISTANCE• AdvanTech flooring is made using advanced resin technology and

a world-class manufacturing process that achieves the lowest water absorption in the panel industry.

• Low water absorption minimizes warping, cupping and edge swell,meaning no sanding is needed – guaranteed!1

SUPERIOR STRENGTH & STIFFNESS• The high density and advanced resin technology of AdvanTech flooring

ensure the panels deliver outstanding bending strength, stiffness and fastener holding power, producing floors that are flat and minimizing issues with floor squeaks and bounce.

HIGHEST QUALITY & SERVICE• AdvanTech flooring offers the best warranty in the business – a limited

50-year warranty that is transferable to every new homeowner and a 300-day no-sanding guarantee.1

• AdvanTech flooring is rated #1 in Quality in two leading industrystudies: Builder Magazine’s Brand Use Study (rated #1 for 8 years running) and an NAHB Customer Satisfaction survey of 100 retailers nationwide.2

VOTED #1 QUALITY BRAND LEADER BYBUILDERS FOR 8 CONSECUTIVE YEARS

2002-2009 Brand UseStudies by Builder Magazine

Check out our Web site – advantechperforms.com for more information.

TM


SUPERIOR MOISTURE RESISTANCE“By using AdvanTech flooring, I can ensure my customersthat rain, snow, and any type of moisture will not hurtthe quality of the subfloor. This flooring lays flat foruse under any type of finish flooring.”Joe TraversTravers Construction

“I prefer AdvanTech flooringbecause it eliminates all floorsqueaks and builds a strongerand more secure and stablefloor system. I have no customer complaints whenusing AdvanTech.”T. Fred BuggFaithway Homes

HIGHEST QUALITY & SERVICE“AdvanTech flooring is a superior product. We use yourproducts exclusively in our upscale homes... and yourproduct is called out by name in our detailed costanalysis to potential customers. Products like yours arespecified because we care about our quality image.”Laurie HuskissonMelchior Building Company

1. Limitations and restrictions apply – visit advantechperforms.com for details. 2. Builder Magazine’s 2009 Brand Use Study – 6,000 builders surveyed. 2008 NAHBRC customer satisfaction research study. 3. All testing was conductedby an independent IAS accredited testing facility in September 2008. This small sample testing was done in accordance with the applicable ASTM standards and test methods. OSB values are based on lowest, average and highestwater absorption levels of four competitors. Plywood value is based on the lowest, average and highest water absorption levels of three competitors. Competitor testing samples correspond to single manufacturing locations from oneproduction date. 4. ICC ES Evaluation Report ESR-1785. 5. Independent IAS accredited testing facility 2006 Design Capacities for OSB Report and 2006 Design Capacities for Structural Plywood Report. © 2008 Huber Engineered Woods LLC. AdvanTech is a registered trademark and FLAT OUT BEST is a trademark of Huber Engineered Woods LLC. Huber is a registered trademark of J.M. Huber Corporation. HUB227-12/08

– Builder Magazine’s 2009 Brand Use Study

0

10

20

30

40

50

PlywoodCompetitors

OSBCompetitors

AdvanTech

ENVIRONMENTAL RESPONSIBILITYAdvanTech flooring is made by Huber Engineered Woods, a company that has been certified by the Sustainable Forestry Initiative (SFI) for responsible environmental behavior and for supporting prompt reforestation and education outreach efforts. What’s more, AdvanTech flooring is made using small, fast-growing trees with no part of the log goingto waste, because our wood waste is used to help fuel our manufacturing facilities.



0

800

1,200

1,600

OSB (PS-2)5

Plywood (PS-2)5AdvanTech4

Design Bending Strength24” o.c. Floor Panels

200,000

300,000

400,000

OSB (PS-2)5

Plywood (PS-2)5AdvanTech4

Design Bending Stiffness24” o.c. Floor Panels

Highest

Average

Lowest

383,800

330,000

300,000

1,250

770 770

9.213.4

18.3

26.3

34.240.3

46.5

Water Absorption3

24” o.c. Floor Panels

SUPERIOR STRENGTH & STIFFNESS

FLAT OUT BEST FOR A QUIET, STIFF FLOOR

wat

er a

bsor

ptio

n %

lbf-

in/f

t

lbf-

in^

2/ft

SUPERIOR MOISTURERESISTANCELow water absorption minimizeswarping, cupping and edge swell –no sanding needed, guaranteed!*

SUPERIOR STRENGTH& STIFFNESSOutstanding bending strength, stiffness and fastener holdingpower produce floors that are flat and minimize issues with floor squeaks and bounce.

HIGHEST QUALITY& SERVICEOffers the best warranty in thebusiness – a limited 50-year warranty that is transferable toevery new homeowner, with a300-day no-sanding guarantee.*

DescriptionAdvanTech® flooring and sheathing are high performance structuralpanels specifically engineered to provide water resistance, strength,stiffness and consistent quality that is superior to competing orientedstrand board (OSB) and plywood products.

Basic UsesA premium-quality alternative to plywood and OSB, AdvanTech®

flooring is used in single layer and subfloor applications. AdvanTech®

sheathing is used for roof and wall sheathing, as well as subflooringin two-layer systems.

Composition & MaterialsHuber Engineered Woods is committed to the responsible use ofnatural resources. AdvanTech engineered wood panels are producedfrom young, fast-growing trees for less waste and faster availability.All parts of the log are used during production. Leftover chips, bark andsawdust are used as fuel to reduce energy use during manufacturing.One of the main benefits of AdvanTech products is that unlike mostOSB and plywood panels that utilize a phenol-formaldehyde (PF)based resin system, the primary resin system used in AdvanTechpanels contains no formaldehyde.

Certification & Code Compliance AdvanTech flooring and sheathing panels are manufactured inconformance with PS-2, Performance Standard for Wood-BasedStructural-Use Panels. Design capacities of AdvanTech products areavailable in ICC ES ER-1785. AdvanTech panels bear the stamp ofTECO, an approved inspection and testing agency. Panels certifiedto PS-2 and ESR-1785 are recognized in the model building codes,the International Residential Code, and the International BuildingCode. Panels may bear stamps certifying conformance to both PS-2and CAN/ CSA-0325. CSA-0325 is a panel performance standardmaintained by the Canadian Standards Association. For additionalinformation, go to advantechperforms.com.

AdvanTech flooring and sheathing panels, certified to be in con-formance with requirements for U.S. Department of Housing andUrban Development (HUD-FHA) Use of Materials Bulletin #40C,bear the designation HUD-UM-40C within the stamp.

Flame SpreadAdvanTech flooring and sheathing panels are recognized as havinga Class C (III) flame spread rating without need for test or label byHUD/ FHA Manual of Acceptance Practices, Section 405-8 to theMinimum Property Standards.

Storage• Ship panels under tarp.• Set bundles on three supports to keep off the ground.

THE PREMIUM-QUALITY ALTERNATIVE

• Outdoors, cover panels loosely with waterproofprotective material.

• Anchor covers on the top of the stack, but keep away from sides and bottom to ensure good air circulation.

• When high moisture exists, cut banding on the stack to prevent edge damage.

Handling• Avoid dropping panels on corners or edges.• When using a forklift, put the stack on a pallet or supports

to minimize damage from forks.

ExposureAs with all wood-based products, properly installed AdvanTechpanels will not decay in service. Building code provisions establishminimum clearances from grade and ventilation requirementsfor crawl spaces and attics. Short-term exposure to moisture, astypical in normal construction delays, will not result in wood decay.AdvanTech panels should not be used in applications that willpermanently expose the panels to the weather nor where moisturewill be at elevated levels for extended periods of time. AdvanTechpanels are not approved or certified for exterior exposure. As apanel classified as Exposure 1 under PS-2, AdvanTech panels areintended to resist the effects of moisture due to construction delaysor other conditions of similar severity, but are not suitable forpermanent exposure to the weather.

InstallationRefer to TECO (www.tecotested.com) and OSB Design andConstruction Guides for general installation details. Additional in-stallation requirements are in the following sections of this brochure.

advantechperforms.com

* Limitations and restrictions apply – visit advantechperforms.com for details. © 2009 Huber EngineeredWoods LLC. AdvanTech is a registered trademark and FLAT OUT BEST is a trademark of HuberEngineered Woods LLC. Huber is a registered trademark of J.M. Huber Corporation. HUB376-02/09



FLAT OUT

FOR A QUIET, STIFF FLOORBEST

EXPECT NOTHING BUT THE BEST FROM ADVANTECH® FLOORING TO DIMINISHFLOOR SQUEAKS, BOUNCE AND MOISTURE-RELATED CONSTRUCTION DELAYS,RESULTING IN A QUALITY BUILD AND SATISFIED HOMEOWNER.

SUPERIOR MOISTURE RESISTANCE• AdvanTech flooring is made using advanced resin technology and

a world-class manufacturing process that achieves the lowest water absorption in the panel industry.

• Low water absorption minimizes warping, cupping and edge swell,meaning no sanding is needed – guaranteed!1

SUPERIOR STRENGTH & STIFFNESS• The high density and advanced resin technology of AdvanTech flooring

ensure the panels deliver outstanding bending strength, stiffness and fastener holding power, producing floors that are flat and minimizing issues with floor squeaks and bounce.

HIGHEST QUALITY & SERVICE• AdvanTech flooring offers the best warranty in the business – a limited

50-year warranty that is transferable to every new homeowner and a 300-day no-sanding guarantee.1

• AdvanTech flooring is rated #1 in Quality in two leading industrystudies: Builder Magazine’s Brand Use Study (rated #1 for 8 years running) and an NAHB Customer Satisfaction survey of 100 retailers nationwide.2

VOTED #1 QUALITY BRAND LEADER BYBUILDERS FOR 8 CONSECUTIVE YEARS

2002-2009 Brand UseStudies by Builder Magazine


TM

SHEATHING INSTALLATION & RIM BOARD SPECIFICATIONS

CutoutsCutouts for plumbing and electrical components should be oversizedby at least 1/4" to avoid a forced fit.

FinishingInterior panels can be left natural, stained, varnished or painted. Advan-Tech sheathing is not recommended, approved or certified for exteriorexposure. Options for painting include urethane coatings, epoxy coatingsand oil-based primer followed by an acrylic latex paint.

Roof SheathingAdvanTech sheathing panels are typically installed over two or morespans, staggered with the long dimension perpendicular to the roofframing. End joints must lie over supports. Screen surface should beinstalled up to maximize skid-resistance. Follow OSHA safety require-ments for proper roof construction practices. All panels must be gapped1/8" at time of installation.Designers may specify sheathing panels for parallel-to-support applications.

Fastening: Roof Sheathing• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1".• Apply fasteners a maximum of 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges,

12" o.c. at intermediate supports.• Ensure that all corners are securely fastened.• For 48" o.c., all fastener spacing should be 6" o.c.• Check local code or construction documents for more restrictive

fastening requirements.

Wall SheathingAdvanTech sheathing panels may be installed parallel or perpendicularto framing members spaced up to 24" o.c. If perpendicular, blockhorizontal joints in panels used as bracing. All panel ends and edgesmust be gapped 1/8" at time of installation. Cover with approved finishedsiding, following manufacturer’s recommendations.

Fastening: Wall Sheathing• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1".• Apply fasteners 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges, 12" o.c.

at intermediate supports. Check local code or construction documentsfor more restrictive fastening requirements.

• Ensure that all corners are securely fastened.• Do not glue wall sheathing products.

Sheathing: Subfloor ApplicationWhen AdvanTech sheathing panels are used in a two-layer floor system, aminimum 1/4" underlayment should be applied. Panels should be installedover two or more spans with the long dimension perpendicular to the supports.All panel edges and ends should be spaced 1/8" at time of installation. Wheninstalling lightweight concrete, ceramic tile or 3/4" wood-strip flooring,follow the manufacturer’s instructions for subfloor preparation.

Fastening: Sheathing as Subfloor• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1."• Apply fasteners 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges,

8" o.c. at intermediate supports. • Ensure that all corners are securely fastened.• For 48” o.c., all fastener spacing should be 6” o.c.• Approved adhesives should be used.

Rim BoardAdvanTech® rim board is a structural framing member designed totransfer lateral loads, support wall loads and tie floor joists together.AdvanTech rim board must be continuously supported along thebottom edge and not used to span openings. It may not be usedas other structural framing elements such as joists, rafters, headersand ledgers.

For more information on AdvanTech rim board, call 800.933.9220or go to advantechperforms.com.

1. Load-Span Tables for AdvanTech panels, HUB 160. See advantechperforms.com for additional load-span tables. Total load deflection limited to L/240. 2. 2006 International Residential Code, Table R503.2.1.1(1).3. Tongue and groove edges, panel edge clips (one between each support, except two between supports 48 inches on center), lumber blocking or other.

Allowable Uniform Roof Loads1 for AdvanTech Panels, loads in PSF, normal duration of load

PANEL SPAN

RATING

20 oc

24 oc

Str. 1 32/16

Str. 1 40/20

NOMINAL PANEL

THICKNESS (inch)

19/32

23/32

1/2

5/8

MAXIMUM SPAN2

(inches, c-c)PRIMARY AXIS PERPENDICULAR TO SUPPORTS

Span, in. c-c

12

300+

300+

300+

300+

3-SpanCONTINUOUSSPANS

16

300+

300+

300+

300+

3-Span

19.2

300+

300+

180

300+

3-Span

24

154

244

87

167

3-Span

30

76

120

43

82

3-Span

32

62

98

35

67

3-Span

36

54

86

31

58

2-Span

40

39

62

22

42

2-Span

With EdgeSupport 3

Without EdgeSupport

32

48

32

40

32

36

28

32

Maximum Support Spacing*

(sheathing as subfloor)

PANEL SPAN

RATING

32/16

40/20

NOMINAL PANEL

THICKNESS (inch)

1/2

5/8

MAXIMUMSPAN

(inches, c-c)

16

20

*Panels should be covered with either: minimum of 1/4” thick underlayment; 1-1/2” of approved cellular, light-weightconcrete or gypsum concrete; edges shall be supported by blocking.

Rim Board Specifications

AVAILABLEDEPTHS

9-1/2”

11-7/8”

14”

16”

AVAILABLETHICKNESSES

1-1/8”

AVAILABLELENGTHS*

16 feet

*Specialty lengths are available on request. Inquiries will be handled on an individual basis.

SHEATHING INSTALLATION & RIM BOARD SPECIFICATIONS

CutoutsCutouts for plumbing and electrical components should be oversizedby at least 1/4" to avoid a forced fit.

FinishingInterior panels can be left natural, stained, varnished or painted. Advan-Tech sheathing is not recommended, approved or certified for exteriorexposure. Options for painting include urethane coatings, epoxy coatingsand oil-based primer followed by an acrylic latex paint.

Roof SheathingAdvanTech sheathing panels are typically installed over two or morespans, staggered with the long dimension perpendicular to the roofframing. End joints must lie over supports. Screen surface should beinstalled up to maximize skid-resistance. Follow OSHA safety require-ments for proper roof construction practices. All panels must be gapped1/8" at time of installation.Designers may specify sheathing panels for parallel-to-support applications.

Fastening: Roof Sheathing• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1".• Apply fasteners a maximum of 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges,

12" o.c. at intermediate supports.• Ensure that all corners are securely fastened.• For 48" o.c., all fastener spacing should be 6" o.c.• Check local code or construction documents for more restrictive

fastening requirements.

Wall SheathingAdvanTech sheathing panels may be installed parallel or perpendicularto framing members spaced up to 24" o.c. If perpendicular, blockhorizontal joints in panels used as bracing. All panel ends and edgesmust be gapped 1/8" at time of installation. Cover with approved finishedsiding, following manufacturer’s recommendations.

Fastening: Wall Sheathing• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1".• Apply fasteners 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges, 12" o.c.

at intermediate supports. Check local code or construction documentsfor more restrictive fastening requirements.

• Ensure that all corners are securely fastened.• Do not glue wall sheathing products.

Sheathing: Subfloor ApplicationWhen AdvanTech sheathing panels are used in a two-layer floor system, aminimum 1/4" underlayment should be applied. Panels should be installedover two or more spans with the long dimension perpendicular to the supports.All panel edges and ends should be spaced 1/8" at time of installation. Wheninstalling lightweight concrete, ceramic tile or 3/4" wood-strip flooring,follow the manufacturer’s instructions for subfloor preparation.

Fastening: Sheathing as Subfloor• Use minimum 6d common nails for panels 1/2" or less.• Use minimum 8d common nails for panels 5/8" to 1."• Apply fasteners 3/8" from panel edges.• Space fasteners minimum of 6" o.c. along supported edges,

8" o.c. at intermediate supports. • Ensure that all corners are securely fastened.• For 48” o.c., all fastener spacing should be 6” o.c.• Approved adhesives should be used.

Rim BoardAdvanTech® rim board is a structural framing member designed totransfer lateral loads, support wall loads and tie floor joists together.AdvanTech rim board must be continuously supported along thebottom edge and not used to span openings. It may not be usedas other structural framing elements such as joists, rafters, headersand ledgers.

For more information on AdvanTech rim board, call 800.933.9220or go to advantechperforms.com.

1. Load-Span Tables for AdvanTech panels, HUB 160. See advantechperforms.com for additional load-span tables. Total load deflection limited to L/240. 2. 2006 International Residential Code, Table R503.2.1.1(1).3. Tongue and groove edges, panel edge clips (one between each support, except two between supports 48 inches on center), lumber blocking or other.

Allowable Uniform Roof Loads1 for AdvanTech Panels, loads in PSF, normal duration of load

PANEL SPAN

RATING

20 oc

24 oc

Str. 1 32/16

Str. 1 40/20

NOMINAL PANEL

THICKNESS (inch)

19/32

23/32

1/2

5/8

MAXIMUM SPAN2

(inches, c-c)PRIMARY AXIS PERPENDICULAR TO SUPPORTS

Span, in. c-c

12

300+

300+

300+

300+

3-SpanCONTINUOUSSPANS

16

300+

300+

300+

300+

3-Span

19.2

300+

300+

180

300+

3-Span

24

154

244

87

167

3-Span

30

76

120

43

82

3-Span

32

62

98

35

67

3-Span

36

54

86

31

58

2-Span

40

39

62

22

42

2-Span

With EdgeSupport 3

Without EdgeSupport

32

48

32

40

32

36

28

32

Maximum Support Spacing*

(sheathing as subfloor)

PANEL SPAN

RATING

32/16

40/20

NOMINAL PANEL

THICKNESS (inch)

1/2

5/8

MAXIMUMSPAN

(inches, c-c)

16

20

*Panels should be covered with either: minimum of 1/4” thick underlayment; 1-1/2” of approved cellular, light-weightconcrete or gypsum concrete; edges shall be supported by blocking.

Rim Board Specifications

AVAILABLEDEPTHS

9-1/2”

11-7/8”

14”

16”

AVAILABLETHICKNESSES

1-1/8”

AVAILABLELENGTHS*

16 feet

*Specialty lengths are available on request. Inquiries will be handled on an individual basis.

Call 914-665-8864 Call 914-665-8864

Details• Greater design flexibility• Boards are sanded for smoother panel options• Edges are cut crisp and square• Rain Screen Technology• Artisan Matrix Panel is resistant to damage from insects including termites, water and harsh weather• Field painted; long-lasting, superior paint adhesion• Non combustible• Installed with fiber-cement furring strips and unobtrusive finishing nails

Finishing with Paint100% acrylic paint

Basic CompositionPortland cement, ground sand, cellulose fiber, select additives and water. Contains no asbestos, glass fibers or formaldehyde.

C o m m e r c i a l

If you’re looking for smooth panels with the benefits of fiber-cement, Artisan® Matrix™ Panels will give you the upscale, architectural-grade results you require. They’re designed for a rain-screen assembly–with its fiber-cement furring strips and finishing nails, Artisan Matrix Panels create a durable, easy-to-install system that creates that high-end look you’re trying to achieve.

artisan® matrix™ panel

Size/Weight/TextureLength: 7´ 11½˝ Width: 3´ 11½˝ Thickness: 5/16˝ Weight: 2.69 lbs/sq ftTexture: Smooth

WarrantyArtisan Matrix Panel is provided with an exclusive 30-year limited warranty. This product replacement warranty is the best in the industry. Ask your local James Hardie sales representative or visit www.jameshardiecommercial.com for a detailed copy of this warranty.

For a dedicated Artisan® Customer Service representative, please call 866.274.3464.

C o m m e r c i a l

Smooth Stucco

Thickness: 5/16˝

Weight: 2.3 lbs./sq. ft.

WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® = =

PRIMED = = =

Thickness: 5/16˝


WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® =

PRIMED = = =

If your project calls for a consistent panelized look—either flush or expressed-seam/reveal—HardiePanel™ siding products offer the protection from fire, weather, and insects. Use our recommended metal edging to create sharp, expressed seams that result in a visually stunning exterior surface that’s as low-maintenance and low-cost as it is high-quality.

For a dedicated James Hardie Customer Service representative, please call 866.274.3464.

HardiePanel™

C o m m e r c i a l

Smooth Stucco

Thickness: 5/16˝


WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® = =

PRIMED = = =

Thickness: 5/16˝


WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® =

PRIMED = = =



HardiePanel™

If your project calls for a consistent panel-ized look—either flush or expressed-seam/reveal—HardiePanel™ siding products offer the protection from fire, weather, and insects. Use our recommended metal edging to create sharp, expressed seams that result in a visually stun-ning exterior surface that’s as low-maintenance and low-cost as it is high-quality.

C o m m e r c i a l

Smooth Stucco

Thickness: 5/16˝


WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® = =

PRIMED = = =

Thickness: 5/16˝


WIDTHS 4´x8´ 4´x9´ 4´x10´

COLORPLUS® =

PRIMED = = =



HardiePanel™

Smooth

Beaded Cedarmill®

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 5.25˝ 6.25˝ 7.25˝ 8.25˝ 9.25˝ 12.0˝ EXPOSURE 4.0˝ 5.0˝ 6.0˝ 7.0˝ 8.0˝ 10.75˝COLORPLUS® = = =

PRIMED = = = = = =

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 8.25˝ EXPOSURE 7.0˝ PRIMED =

Colonial Smooth®

Rustic Cedar EZ Line® alignment

Rustic Cedar

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 8.0˝EXPOSURE 6.75˝PRIMED =

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 8.25˝ 9.25˝EXPOSURE 7.0˝ 8.0˝ PRIMED = =

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 8.25˝EXPOSURE 7.0˝ PRIMED =

Colonial Roughsawn®

Beaded Smooth



Select Cedarmill®

Thickness: 5/16˝Weight: 2.3 lbs./sq. ft.Length: 12˝ planksWIDTHS 5.25˝ 6.25˝ 7.25˝ 8.25˝ 9.25˝ 12.0˝ EXPOSURE 4.0˝ 5.0˝ 6.0˝ 7.0˝ 8.0˝ 10.75˝COLORPLUS® = = = =

PRIMED = = = = = =

C o m m e r c i a l

HardiePlank™ lap siding offers the beauty and traditional look of wood lap siding while providing very non-wood-like benefits: low maintenance and an unmatched resistance to weather damage in wet and humid climates while retaining its natural beauty. Our proprietary ColorPlus® Technology combines a professionally developed 26-color paint palette optimally formulated for use with fiber cement. The multi-coat, baked-on factory application process delivers a strikingly beautiful and consistent finished product. Our siding is also ideal for blending the look of a commercial building into a residential environment.


HardiePlank™

Smooth

Beaded Cedarmill®


PRIMED = = = = = =


Colonial Smooth®


Rustic Cedar





Beaded Smooth



Select Cedarmill®


PRIMED = = = = = =

C o m m e r c i a l



HardiePlank™

Smooth

Beaded Cedarmill®


PRIMED = = = = = =


Colonial Smooth®


Rustic Cedar





Beaded Smooth



Select Cedarmill®


PRIMED = = = = = =

C o m m e r c i a l



HardiePlank™

HardiePlank™ lap siding offers the beauty and traditional look of wood lap siding while providing very non-wood-like benefits: low maintenance and an unmatched resistance to weather damage in wet and humid climates while retaining its natural beauty. Our proprietary ColorPlus® Technology combines a profes-sionally developed 26-color paint palette optimally formulated for use with fiber cement. The multi-coat, baked-on factory application process delivers a strikingly beautiful and consistent finished product. Our siding is also ideal for blending the look of a commercial building into a residential environment.

XLD® Boards Smooth MD Cedarmill© MD Smooth

Thickness: 1˝


Length: 10´ boards

WIDTHS 4.0˝ 5.0˝ 6.0˝ 8.0˝ 12.0˝

COLORPLUS® = = = = =

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

C o m m e r c i a l

The final, ultimate finishing touch to any commercial project using James Hardie fiber-cement products can be provided only by HardieTrim™ boards. HardieTrim boards create deep shadow lines and wider reveals, as well as boasting durability in corners, columns and windows that is unmatched.


HardieTrim™


Thickness: 1˝


Length: 10´ boards

WIDTHS 4.0˝ 5.0˝ 6.0˝ 8.0˝ 12.0˝


PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

C o m m e r c i a l



HardieTrim™


Thickness: 1˝


Length: 10´ boards

WIDTHS 4.0˝ 5.0˝ 6.0˝ 8.0˝ 12.0˝


PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

C o m m e r c i a l



HardieTrim™


Thickness: 1˝


Length: 10´ boards

WIDTHS 4.0˝ 5.0˝ 6.0˝ 8.0˝ 12.0˝


PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

C o m m e r c i a l



HardieTrim™


Thickness: 1˝


Length: 10´ boards

WIDTHS 4.0˝ 5.0˝ 6.0˝ 8.0˝ 12.0˝


PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

Thickness: 7/16˝


Length: 12´ boards

WIDTHS 3.5˝ 5.5˝ 7.5˝ 11.5˝

PRIMED = = = =

C o m m e r c i a l



HardieTrim™

The final, ultimate finishing touch to any

commercial project using James Hardie

fiber-cement products can be provided only

by HardieTrim™ boards. HardieTrim boards

create deep shadow lines and wider reveals, as

well as boasting durability in corners, columns

and windows that is unmatched.

HardieBacker® 500 Cement Board for walls and floors delivers superior protection against moisture damage and mold growth. It contains no paper facing, which serves as a food source for mold, or gypsum, which can disintegrate with continuous moisture exposure. HardieBacker board is an ideal choice for wet area walls; its smooth surface may be painted, textured, wallpapered, or tiled. HardieBacker® 500 board is available in a 3´x 5´ and 4´x 8´ sheet size and is backed by a limited lifetime product warranty.

HardieBacker® Cement Board with Moldblock™ Technology

Basic Composition/Size90% Portland cement and ground sand. HardieBacker® board contains no asbestos, glass mesh, formaldehyde, or gypsum.

* Sheet Size: * 3’x 5’ * 4’x 8’ * Thickness: 0.42” * Weight: 2.6 lbs/sq.ft.

Mold Resistance HardieBacker products achieve a perfect score on both industry standard mold tests. HardieBacker board scores a 0 (best possible score) on the ASTM G21 for mold resistance and a 10 (best possible score) on the ASTM D3273 test against mold growth.

Call 914-665-8864 Call 914-665-8864

LUMBER Timbers3x and larger - Numerous species

Dimensional• 2x4 - 2 x12

• Doug Fir • Hem Fir

• Spruce

• KD • Green

• HT

• #2

• #3 • Pressure Treated • Fire Retardant

Boards1x2 - 5/4x12

• Pine Clears & Commons

• Hardwoods

- S2S

- S4S

- RWRL • Pressure Treated • Fire Retardant

Customer service is essential to our success. We perpetually strive to provide our

customers with a combination of value added services coupled with superior

products at competitive prices.Every member of our team is empowered to maximize the customer’s service experience

on every transaction.That is the

Celtic Service Guarantee.

Call 914-665-8864© 2013 Celtic Building Supplies, Inc. All Rights Reserved.

BUILDING SUPPLIES

BUILDING SUPPLIES

BUILDING SUPPLIES

Documents

Celtic Building And Forest Brochure