Embed Size (px)
Citation preview
www.canxus.cawww.canxus.cawww.canxus.ca
Cylinder Head Repair Tools & Supplies
CH2018
Celebrating over 20 years
of serving your engine parts
and shop supply needs.
1 - 8 7 7 - 5 7 4 - 4 4 4 4
2
INDEX
Category Page
Valve Guide Liner
Bronze Bullet 3 - 5
Bronze Bullet Tooling 6 - 14
Steel Grip ® Valve Seals 15
Bronze Reamers 16
H.S.S. Reamers for Cast 17
Neway
Seat Cutters 18 - 19
Seat Cutters - Replacement Blades 20
Pilots - Cutters 21 - 23
3 Angle Seat Cutting System
Tooling 24
3 Angle Seat Cutters 25 - 26
Tip Profiles 27 - 28
Shop Supplies
Valve Seat Magnum Wheels and Drivers 29
Magnum Valve Refacer Wheels / Finishing / Valve Stem Seal Puller
30
Valve Spring Compressor 31
CBN Flywheel Stones & CBN & PCD Inserts 32
Chemicals / Misc. Gloves & Aprons Tool Crib (MRO) Aerosols Cylinder Head and Engine Bags
33 - 35 34 35 35
Heat Tabs and Adhesive 36
TimeSert—Thread Repair 37 - 38
Policy Statement 39
3
VALVE GUIDE LINER
4
VALVE GUIDE LINER
5
VALVE GUIDE LINER
6
VALVE GUIDE LINER TOOLING
7
VALVE GUIDE LINER TOOLING
8
VALVE GUIDE LINER TOOLING
9
VALVE GUIDE LINER TOOLING
10
VALVE GUIDE LINER TOOLING
11
VALVE GUIDE LINER TOOLING
PT#: 4529 Pint PT#: 4528 Quart
12
VALVE GUIDE LINER TOOLING
13
VALVE GUIDE LINER TOOLING
14
VALVE GUIDE LINER TOOLING
Part No. Size
BC5M24 5MM
BC55M24 5.5MM
BC6M24 6MM
BC64M24 6.4MM
BC7M24 7MM
BC8M24 8MM
BC9M24 9MM
BC95M24 9.5MM
BC10M24 10MM
BC11M24 11MM
These units are 240 Grit.
15
STEEL GRIP ® - VALVE SEALS
16
BRONZE REAMERS
17
H.S.S. REAMERS FOR CAST
18
SEAT CUTTERS
19
SEAT CUTTERS
20
SEAT CUTTERS - REPLACEMENT BLADES
21
PILOTS
22
PILOTS
23
CUTTERS - PILOTS
24
3 ANGLE SEAT CUTTING - TOOLING
25
** Other Carbide Inserts are available by special order. Give us a call with your Newen or Sunnen numbers. **
3 ANGLE SEAT CUTTING - CUTTERS
26
3 ANGLE SEAT CUTTING - CUTTERS
R-003-B1
27
** Other Carbide Inserts are available by special order. Give us a call with your Newen or Sunnen numbers. **
3 ANGLE SEAT CUTTING - TIP PROFILE
28
3 ANGLE SEAT CUTTING - TIP PROFILE
29
SHOP SUPPLIES - MAGNUM VALVE SEAT WHEELS AND DRIVERS
30
MAGNUM VALVE REFACER WHEELS *** for Diesel and Titanium Applications *** SIOUX (680, 956, 2001, 2075) PT#: K-660DT 7” x 11/16” x 1 3/4” 100 Grit SUNNEN (VR-7000, VR-8000) IDL (ALL MODELS) PT#: K-8260DT 8” x 1 1/4” x1 1/2” KWIK-WAY (SVS, SVS-2) ROTTLER (VR7) PT#: K-760DT 7” x 1” x 7/8” 100 Grit
SHOP SUPPLIES - VALVE REFACER WHEELS / FINISHING
MIRROR FINISH Valve Grinding Aid PT#: MF-16 Works on titanium, stainless, stellite, and
other valve materials Eliminates chatter and wheel loading Provides exceptional surface quality Increases stone life Reduces cutting temperatures
VALVE STEM SEAL PULLER 3 Jaw pulling action works on most domestic and import vehicles. Fits multi-valve engines. PT#: SP-101 3/8” - 3/16” Seals PT#: SP-102 1/2” - 3/4” Seals
31
VALVE SPRING COMPRESSOR FOR
HEAVY-DUTY APPLICATIONS
Large 11” x 13 1/2” frame
Includes: Offset Jaw And Recessed Jaws for Cat and
Cummins
Max. pressure of 350lbs.
Re-engineered with a stronger frame, more reliable power head and improved operator controls.
Jaws for Detroit sold separately.
PT#: RL-DET
PT#: RL-700DA
SHOP SUPPLIES - VALVE SPRING COMPRESSORS
PREMIUM VALVE SPRING COMPRESSOR
Includes: 3 sets of quick change jaws for 7/8” - 2-1/2” diameter
springs.
Air powered.
PT#: 4260N
Replacement jaws PT#: 4261, 4262 and 4263.
Rebuild kits available upon request.
32
SHOP SUPPLIES - CBN FLYWHEEL STONES / CBN & PCD INSERTS
Efficient Alternative to Conventional Abrasives Precision Balanced Aluminum Cores
** Note: For best results, use with fresh coolant and an increased coolant flow. **
PT#: CP3000F 3” Dia PT#: CP4000F 4” Dia.
PT#: CP6000F 6” Dia.
CBN Inserts for cast. Use CBN (Cubic Boron Nitride) inserts for proven Results. Each of these units is double sided.
PT#: SER1002 3/8” x .125 PT#: SER1003 1/2” x .125 PT#: SER1004S 1/2” x .1875 with shim.
New PT#: CBN500SED 1/2” x 3/16” for diesel applications. A ** Also ask us about re-sharpening
your used CBN Inserts ** PCD Inserts for Aluminum, PCD (Polycrystalline Diamond) Inserts to be used on aluminum only.
All PDC Inserts are single sided only.
PT#: PCDS-12 1/2” x .125 PT#: PCDS-25 1/4” x 0.70 9° Angle PT#: PCDS-38 3/8” x .125
Seymour Tool Cutting Oil PT#: 620-1557 Lubricates and cools the cutting point. Adheres to surface and resists run-off. Eliminates scoring and chatter marks. Provides a clear film for viewing workplace. Increases tool life. Use for cutting, drilling and tapping on all metals. Can sprays in any position.
** Shake well before use **
33
CHEMICALS / MISC. - CLEANING, COOLING AND COATING
HOT TANK POWDER—MAGCLEAN PT#: CP1875BP 20 LITRES PT#: CP1875BP-220L 220 LITRES
** DANGEROUS GOODS - SDS Available on the CANXUS website ** A granular mixture of alkalis, wetting agents, sequestrates and activating agents.
*** NOT FOR USE ON ALUMINUM *** Features: Removes carbon and paint, heavy soil deposits, rust and water scale. Eliminates most hand detailing. Excellent tank life. Fast acting. Non-phosphate. Provides in process rust inhibition if un-rinsed. Suitable for use in most hard water areas.
** MIX 4—12% - 1 LB / GALLON DO NOT EXCEED 2 LB / GALLON **
(Call for a quote on transportation of 220ltr drums)
HONING OIL—LEXHONE HONING OIL Our most popular honing oil and an excellent value. Formulated to
Industrial standards.
PT#: LEXHONE 50E-205 205 LITRES (Call for a quote on transportation)
PT#: LEXHONE 50.E 20 LITRES
PT#: LEXHONE 50.E –4 4 LITRES
VALVE REFACING GRINDING OIL A blend of cutting oil and extreme pressure additives. Provides excellent
surface finish and corrosion protection for valve grinding.
PT#: 4540 1 GALLON PT#: 4542 5 GALLONS
COOLANT—MAGCOOL PT#: CP54004 4 LITRES PT#: CP5400 20 LITRES
Lubricates and protects steel and other metals from corrosion. Features: Long sump life, reduce maintenance cost. Reduced tank dumping when the lubricant is well maintained. High corrosion resistance on steel, aluminum alloys and other Cuprous alloys.
SPRAY WASHER—MAGSPRAY PT#: CP3350B 20 LITRES PT#: CP3350B-220 220 LITRES
** DANGEROUS GOODS - SDS Available on the CANXUS website** Medium duty, non phosphate, alkaline spray wash detergent primarily used in spray wash cabinets for multi-metal degreasing applications. Features: Excellent for the removal of metal working lubricants, oils and greases. Non phosphate. Low foaming from 49—82° C (120-180F). Good hard water control. Short term corrosion protection if left un-rinsed. Economical.
** MIX 5—10% WITH WATER ** (Call for a quote on transportation of 220ltr drums)
34
HYDRO-AIR PRESSURE WASHER PT#: DM-200
Operates on 5-200 PSI of either shop or plant air and a standard 3/4” water hose. Constructed of chrome plated zinc and brass. Includes a quick coupler siphon hose attachment, nozzle extensions and a flushing adapter. Connects to either cold or hot water supply. Blasts heavy dirt without harming fine finishes.
K-Seal Sealant PT#: ST9501 Total Coolant Leak Repair. Suitable for all water cooled engines. HD engines should us K-Seal HD. No need to drain or flush the system before use. Repairs most leaks in the head, headgasket, radiator, heater core, freeze plugs, water pump, cylinder head, engine blocks.
Specially formulated for Canada. Sold world wide!
SEAL-LOCK FLUID WELD PT#: 30333 2OZ PT#: 30334 8.2OZ
To repair fine crack, pin holes and porosity in cast iron or aluminum. Seals injector tubes, gaskets, freeze plugs etc. Lubricating properties eases installation of valve seat inserts, valve guides, sleeves and other press fit parts.
SEAL-LOCK GRIP PT#: 30650 50ML PT#: 30650 250ML Superior high strength and temperature sealant that locks and seals the parts. ** Heating for 15 minutes at 200°F will speed curing and increase the strength of the seal. It is also resistant to solvents.
SEAL-ALL PT#: 30444 1QT PT#: 30444 1GALLON Head and Block Sealer. Works with materials inside the water jacket to form a tough flexible lining that seals leaks and maintain cooling system pressures. Prevents rust and corrosion. Seals porosity, pin holes and fine cracks in iron and aluminum.
SEAL TABS PT#: 30700 20 PACK PT#: 30701 50 PACK Prevent leaks and permanently seal automotive cooling systems.
Contains no metallic particles! Will only dissolve in water and anti-freeze!
HOT TANK GLOVES / APRONS Alkaline and oil resistant and lined for heat protection. Neoprene coated! PT#: GL-1418T (18”) Protective Neoprene Aprons PT#: 440090
CHEMICALS MISC. - GLOVES, APRONS
35
CHEMICALS / MISC. - TOOL CRIB AEROSOLS, BAGS
Tool Crib — Chemicals
Most products come with an all position valve that allows use in any position, even upside down!
CANXUS ENGINE BAGS 52” x 44”
100 Per Roll 2mil bag.
PT#: EB-5244L
CANXUS CYLINDER HEAD BAGS
10” x 8” x 36” 100 Per Roll
3mil bag
PT#: CB-10836
MADE IN
CANADA
620-1500 Silicone Lube 620-1501 Open Gear Lube
620-1502 Chain & Cable Lube 620-1505 Dry Moly Lube
620-1506 Dry Graphite Lube 620-1507 Heavy Duty Anti-Seize
620-1525 Red Insulating Varnish 620-1526 Electric Motor Contact Cleaner
620-1529 Tinted Ignition Sealer 620-1536 Carb & Choke Cleaner
620-1538 Contractor’s Grade Adhesive 620-1542 5 Way Corrosion Inhibitor & Lube
620-1543 Penetrating Oil 620-1548 Non-Chlorinated Brake & Parts Cleaner
620-1557 Tool Cutting Oil 620-1558 Toolmaker’s Blue Layout Ink
620-1559 Toolmaker’s Layout Ink Remover 620-1568 Cleaner / Degreaser
36
250°F GAS ENG HEAT TABS 100/PK
PT#:HT250
Low Temp 225-230°F Heat Tabs 100/PK
PT#:HT1L
Heat Tab Adhesive Tacky H.T. Adh. Tube(3oz)
PT#:HTA Effective range: -76°-+350°F Provides proper heat transfer to the heat tab to get an accurate melt if the engine overheats past the temperature of the heat tab installed. Maintains long-term holding strength.
*** Attach on each head and on both sides of the block. *** If the engine reached the designated temperature, the centre portion of the tab will melt providing you with fast visual evidence that the en-gine has overheated.
Marine Tabs 187-192°F Heat Tabs 100/PK
PT#:HTM1
CHEMICALS / MISC. - HEAT TAB
37
TIMESERT - Spark Plug Thread Repair Kits
38
TIMESERT - Spark Plug Thread Repair Kits
39
TIMESERT - Head Bolt Thread Repair Kits
40
Head Office:
261250 Con. 18 Hanover, ON N4N 3B8
Ph: (519) 364-6051 Fax: (519) 364-5201
Toll-Free: 877-574-4444
Edmonton Warehouse:
16503—116th Ave. N.W. Edmonton, AB T5M 3V1
Fax: (519) 364-5201
Toll-Free: 800-661-5624
Our Product Lines
www.canxus.ca
