Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
CEKA
Impression Technique
CEKA AXIAL CLASSIC
• Male part attached in the mouth
• Female attached in the denture
Impression technique
RE H 2 (M2)
H2 (M3)
First unthread the spring pin from the mouth.
Then thread in the black impression tool and take an impression.
Model fabrication
RE H 2 (M2)
H2 (M3)
RE H 14 (M2)
H 14 (M3)
RE H 2 (M2)
H2 (M3)
Thread the model analogue into the impression analogue which is in
the impression and pour out your model.
Remove the impression when the model has hardened.
Remove the impression tool and thread in the spring pin.
CEKA AXIAL REVERSE
• Female part in the mouth attached to crown or root cap.
• Female part in the mouth attached to crown or root cap.
CEKA AXIAL REVERSE
Impression
RE H 14 (M2)
H 14 (M3)
RE 0031 (M2)
694 C (M3)
Female part in the mouth
Thread the spring pin into the impression tool and click the assembled
parts into the female with the space maintainer ring in between.
Impression
• Take an anatomical impression,allow it to harden andthen remove it from the mouth.
• If the impression analogue and spring pin will not come out of the impression, remove them and place them in the hardened impression material.
Model fabrication
RE H 14 (M2)
H 14 (M3)
RE 0031 (M2)
694 C (M3)
RE H 13 (M2)
H 13 (M3)
Click the model analogue over the impression analogue with the space
maintainer ring in between. Then pour out your model.