Upload
darleen-parks
View
213
Download
0
Embed Size (px)
Citation preview
CDMA/OFDMA system: General settings
Obs: should leave room for LTE/Wimax options
OBS: On this slide there are 9 tabs (as it is today in SEAMCAT 3), towards the last slides there will be a total of 5 tabs due to the proposed new layout
CDMA/OFDMA system: Positioning and System layout are not mergedNew change: Antenna pattern is now directly visible from the display (user does need to open a new window)
This is an improvement, but for SEAMCAT 4 we could do better. Currently, when the user select the cell number, he has to go back to the ”system layout” tab to visualise it. It is proposed to merge ”system layout” with ”positioning” to reduce the number of tab to select see next slide
Can do better, see next slide
CDMA/OFDMA system: Positioning and System layout are merged1) Antenna pattern is now directly visible from the display (user does need to open a new window)2) Positioning and system tab are visible from the same display (i.e. Any change in the number of cell is seen right away and avoid the user to select system layout tab)
CDMA/OFDMA system: Propagation model + Pathloss correlation and Link settings are merged 1) This is consistent with the change made in ”traditional” (i.e. Less tab to click)
2) ”Propagation model” and ” Pathloss correlation” belongs to the link definition3) Reduce the number of tab for the user to select
CDMA/OFDMA system: VrIt path1) This is consistent with the change made in ”traditional” (i.e. Less tab to click)2) ”Propagation model” belongs to the link definition3) Reduce the number of tab for the user to select
Overview of CDMA/OFDMA tab SEAMCAT 4: proposal
General settings
Link specifics settings
capacitySystem layoutPositioningPropagation modelPathloss correlation
General settings
Link settings
capacity
Positioning
OBS2: In general, we should NOT have a difference in the display between ”traditional” and ”CDMA/OFDMA”. It is proposed to use the ”traditional” display box instead of the ”line” used in CDMA/OFDMA to separate panels.
SEAMCAT 3 SEAMCAT 4
Vr IT path
WtIt path (Path to be removed in SEAMCAT 4 for CDMA/OFDMA interface)
Vr IT path
9 tabs5 tabs
Specific interfering link
No changemerge