Embed Size (px)
Citation preview
CD160M Dri-Prime® Pump
FeaturesFully automatic priming from dry to 28' (8.5 m) of suction lift.
•
Close-coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive or as bareshaft pumpend.
•
Extensive application flexibility – will handle raw sewage, slurries and liquids with solids up to 3" (75 mm) in diameter.
•
Dry-running, high pressure oil bath, mechanical seal with high abrasion-resistant silicon carbide interfaces.
•
Continuously operated Godwin venturi air ejector priming device rfeaturing belt-driven air compressor requiring no form of periodic adjustment or control.
•
All cast iron construction (stainless steel construction optional) with cast steel impeller.
•
Standard engine – John Deere 6068T. Available with a variety of engines including Caterpillar, Cummins and Deutz.
•
CD1
60M
Pipe Connections 6" (150 mm) ASA 150#
Max. Capacity 1900 GPM (431 m3/h)
Max. Head 260' (79.2 m)
Solids Handling 3" (75 mm)
Impeller Diameter 14" (356 mm)
Max. Op. Temp. +176°F (80°C)Max. Working Press. 130 psi (9 BAR)
Max. Suct. Press. 72 psi (5 BAR)
Max. Casing Press. 195 psi (13.5 BAR)
Max. Op. Speed 2000 RPM
Fuel Tank Capacity 150 gal. (568 l)
Fuel Consumption (Full Load, Max. Speed)
6.3 GPH @ 1800 RPM (0.02 m3/h)
Specifications
T he Godwin Dri-Prime 6" (150 mm) CD160M pump is an extremely powerful yet compact pump with flow
capabilities to 1900 GPM (431 m3/h) and discharge heads to 260' (79.2 m). In addition, the CD160M features the unique Godwin high pressure oil bath mechanical seal design that allows for totally dry running for indefinite periods of time while automatically priming and repriming. Able to perform in the toughest conditions, the CD160M can pass a solid to 3" (75 mm) in diameter, making it a high pressure trash pump as well as a superior dewatering pump. The powerful CD160M has proven itself a pump of choice for mines, quarries, temporary fire pump systems and many other high pressure applications.
MaterialsPump Casing & Suction Cover
Cast iron
Wearplates Cast iron hardened to minimum Brinell 440 HB
Pump Shaft 1½% Nickel/chromium steel
Impeller Cast chromium steel hardened to Brinell 440 HB
Non-Return Valve Flapper High nitrile rubber
Mechanical Seal Faces Solid silicon carbide
Performance Curve
Drawings
CD
160M
Performance TableDiesel Set: JD6068T, 147 HP (110 kW) @ 2200 RPMImpeller Diameter: 14" (356 mm)
Trailer-mounted JD6068T engineWeight - 6535 lbs. (2964 kg)
Total Suction Head - Feet
150 175 200 225
10 1850 1780 1450 970
15 1810 1740 1320 860
20 1560 1450 1250 710
25 1370 1300 1190 580
Output - GPM
Performance data listed in table and curves based on water test at sea level and 68°F (20°C). Maximum flows may require larger diameter pipes.
Total Delivery Head - Feet
45-5/16"1151mm
93-3/8"2372mm
36"914mm
163-3/8"4150mm
76-1/4"1937mm
16-7/16"418mm
30-3/4"781mm
25"635mm
© Copyright 2007 Godwin Pumps of America, Inc. .cnI ,aciremA fo spmuP niwdoG fo skramedart deretsiger era spmup rof egnaro roloc eht dna emirP-irD ,spmuP niwdoG
Specifications and illustrations are subject to revision without notice. Godwin Pumps is not liable for any incompleteness or inaccuracies. Godwin Pumps is not liable for any consequential, incidental or indirect damages relating to these specifications or their use.
1400RPM
1600RPM
1800RPM
2000RPM
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
30
50
70
90
110
130
150
170
190
210
230
250
270
290
0 10 20 30 40 50 60 70 80 90 100 110 120
0 200 400 600 800 1000 1200 1400 1600 1800 2000
FLOW
US GPM
M3/Hr.
(ft.)(m)TO
TAL
DYN
AM
IC H
EAD
Aquatech Pump and Power: Phone: 905-907-7852 • Fax: 905-907-1701
Aquatech Dewatering Company: Phone: 905-907-1700 • Fax: 905-907-1701
69 Connie CrescentConcord, ON L4K 1L3Email us: [email protected]
www.aquatd.ca
