RS Part No. 696-1213

Instruction ManualCCTV extention cable 7MEX07 (with power & video)

RS PART No.:696-1213

OWNER’S DATA & MANUALCCTV extention cable video and power 7mEX07

ITEM DESCRIPTION COLORA DC JACK(FEMALE) RED

B DC JACK(MALE) RED

C BNC JACK(MALE) YELLOW

D MOULD BLACK

E ø4.5 CABLE:2p/1Shield BLACK

Pre-Made CCTV Power/Video CablesPre-Made CCTV Security Camera Power and Video Cables are a great choice for an easy security camera installation. These cables already have the fittings for both power and video, so no crimping or cutting is required. These Pre-made CCTV cables are available in 7Mt & 20Mt now.

The cable has BNC video and power connectors already attached to the cable. Simply plug in these cables to your security cameras and you can instantly carry power out to your surveillance camera and video back from the camera with a single cable per camera. Great for easy Plug and Play security camera installations!This cable is easy to install and have BNC video and power ends already installed on the cable.

Connections:1. Plug the BNC connector into the BNC ports on your DVR Card or DVR2. Next Plug the Power adapter into the Power Jack(B)3. With CCTV Cameras, use the BNC to connect the camera to the cables

**These cables come highly recommended by professional installers for easy Installation of your CCTV System

Feature- Used in CCTV cabling applications.- 7Mt or 20Mt of Power/Video cable- Plug & Play operation- No fussing with crimp connectors