CCNA the purpose and types of ACLs Configure and apply ACLs based on network filtering requirements using SDM and CLI

Address: B-125, Sec-2, Noida Web: www.multisoftsystems.com Contact: +91-9810306956 Landline: +91-1202540300/400

Software Development & Education Center

CCNA (Cisco Certified Network Associate)

http://www.multisoftsystems.com/


640-802 CCNA – Routing & Switching (ICND1 & ICND2)

Exam Description

The 640-802 CCNA is the composite exam associated with the Cisco Certified Network

Associate certification. Candidates can prepare for this exam by taking the Interconnecting

Cisco Networking Devices Part 1 (ICND1) v1.0 and the Interconnecting Cisco Networking

Devices Part 2 (ICND2) v1.0 courses. This exam tests a candidate's knowledge and skills

required to install, operate, and troubleshoot a small to medium size enterprise branch

network. The topics include connecting to a WAN; implementing network security;

network types; network media; routing and switching fundamentals; the TCP/IP and OSI

models; IP addressing; WAN technologies; operating and configuring IOS devices;

extending switched networks with VLANs; determining IP routes; managing IP traffic with

access lists; establishing point-to-point connections; and establishing Frame Relay

connections.

Exam Topics

The following topics are general guidelines for the content likely to be included on the

Cisco Certified Network Associate exam. However, other related topics may also appear on

any specific delivery of the exam. In order to better reflect the contents of the exam and for

clarity purposes, the guidelines below may change at any time without notice.

Describe How a Network Works

Describe the purpose and functions of various network devices

Select the components required to meet a network specification

Use the OSI and TCP/IP models and their associated protocols to explain how data

flows in a network

Describe common networked applications including web applications

Describe the purpose & basic operation of the protocols in the OSI and TCP models



Describe the impact of applications such as Voice Over IP on a network

Interpret network diagrams

Determine the path between two hosts across a network

Describe the components required for network and Internet communications

Identify and correct common network problems at layers 1, 2, 3 and 7 using a

layered model approach

Differentiate between LAN/WAN operation and features

Configure, verify and troubleshoot a switch with VLANs and inter switch

communications

Select the appropriate media, cables, ports, and connectors to connect switches to

other network devices and hosts

Explain the technology and media access control method for Ethernet networks

Explain network segmentation and basic traffic management concepts

Explain basic switching concepts and the operation of Cisco switches

Perform and verify initial switch configuration tasks including remote access

management

Verify network status and switch operation using basic utilities (including: ping,

traceroute, telnet, SSH, arp, ipconfig), and SHOW & DEBUG commands

Identify, prescribe, and resolve common switched network media issues,

configuration issues, auto negotiation, and switch hardware failures

Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP,

802.1q)

Describe how VLANs create logically separate networks and the need for routing

between them

Configure, verify, and troubleshoot VLANs

Configure, verify, and troubleshoot trunking on Cisco switches

Configure, verify, and troubleshoot inter VLAN routing



Configure, verify, and troubleshoot VTP

Configure, verify, and troubleshoot RSTP operation

Interpret the output of various shows and debug commands to verify the

operational status of a Cisco switched network.

Implement basic switch security (including: port security, trunk access,

management VLAN other than vlan1, etc.)

Implement an IP addressing scheme and IP Services to meet network requirements

in a medium-size Enterprise branch office network

Describe the operation and benefits of using private and public IP addressing

Explain the operation and benefits of using DHCP and DNS

Configure, verify and troubleshoot DHCP and DNS operation on a router (using both

the CLI and SDM)

Implement static and dynamic addressing services for hosts in a LAN environment

Calculate and apply an addressing scheme including VLSM IP addressing to a

network

Determine the appropriate classless addressing scheme using VLSM and

summarization to satisfy addressing requirements in a LAN/WAN environment

Describe the technological requirements for running IPv6 in conjunction with IPv4

(including: protocols, dual stack, tunneling, etc.)

Describe IPv6 addresses

Identify and correct common problems associated with IP addressing and host

configurations

Configure, verify, and troubleshoot basic router operation and routing on Cisco

devices

Describe basic routing concepts (including: packet forwarding, router lookup

process)



Describe the operation of Cisco routers (including: router boot up process, POST,

router components)

Select the appropriate media, cables, ports, and connectors to connect routers to

other network devices and hosts

Configure, verify, and troubleshoot RIPv2

Access and utilize the router to set basic parameters.(including: CLI/SDM)

Connect, configure, and verify operation status of a device interface

Verify device configuration and network connectivity using ping, traceroute, telnet,

SSH or other utilities

Perform and verify routing configuration tasks for a static or default route given

specific routing requirements

Manage IOS configuration files. (Including: save, edit, upgrade, restore)

Manage Cisco IOS

Compare and contrast methods of routing and routing protocols

Configure, verify, and troubleshoot OSPF

Configure, verify, and troubleshoot EIGRP

Verify network connectivity (including: using ping, traceroute, and telnet or SSH)

Troubleshoot routing issues

Verify router hardware and software operation using SHOW & DEBUG commands.

Implement basic router security

Explain and select the appropriate administrative tasks required for a WLAN

Describe standards associated with wireless media (including: IEEE, WI-FI Alliance,

ITU/FCC)

Identify and describe the purpose of the components in a small wireless network.

(Including: SSID, BSS, ESS)

Identify the basic parameters to configure on a wireless network to ensure that

devices connect to the correct access point



Compare and contrast wireless security features and capabilities of WPA security

(including: open, WEP, WPA-1/2)

Identify common issues with implementing wireless networks. (Including: Interface,

misconfiguration)

Identify security threats to a network and describe general methods to mitigate

those threats

Describe today's increasing network security threats and explain the need to

implement a comprehensive security policy to mitigate the threats

Explain general methods to mitigate common security threats to network devices,

hosts, and applications

Describe the functions of common security appliances and applications

Describe security recommended practices including initial steps to secure network

devices

Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise

branch office network

Describe the purpose and types of ACLs

Configure and apply ACLs based on network filtering requirements using SDM and

CLI

Configure and apply an ACL to limit telnet and SSH access to the router using SDM

and CLI

Verify and monitor ACLs in a network environment

Troubleshoot ACL issues

Explain the basic operation of NAT

Configure NAT for given network requirements using SDM and CLI

Troubleshoot NAT issues

Implement and verify WAN links

Describe different methods for connecting to a WAN



Configure and verify a basic WAN serial connection

Configure and verify Frame Relay on Cisco routers

Troubleshoot WAN implementation issues

Describe VPN technology (including: importance, benefits, role, impact,

components)

Configure and verify a PPP connection between Cisco routers



640-554 IINS (CISCO IOS Network Security)

Exam Description

The 640-554 Implementing Cisco IOS Network Security (IINS) exam is associated with the

CCNA Security certification. This exam tests a candidate's knowledge of securing Cisco

routers and switches and their associated networks. It leads to validated skills for

installation, troubleshooting and monitoring of network devices to maintain integrity,

confidentiality and availability of data and devices and develops competency in the

technologies that Cisco uses in its security infrastructure. Candidates can prepare for this

exam by taking the Implementing Cisco IOS Network Security (IINS) course.

Exam Topics


Implementing Cisco IOS Network Security (IINS) exam. However, other related topics may

also appear on any specific delivery of the exam. In order to better reflect the contents of

the exam and for clarity purposes, the guidelines below may change at any time without

notice.

Common Security Threats

Describe common security threats

Security and Cisco Routers

Implement security on Cisco routers

Describe securing the control, data, and management plane

Describe Cisco Security Manager

Describe IPv4 to IPv6 transition

AAA on Cisco Devices

Implement AAA (authentication, authorization, and accounting)

Describe TACACS+

Describe RADIUS & AAA

Verify AAA functionality



IOS ACLs

Describe standard, extended, and named IP IOS access control lists (ACLs) to filter

packets

Describe considerations when building ACLs

Implement IP ACLs to mitigate threats in a network

Secure Network Management and Reporting

Describe secure network management

Implement secure network management

Common Layer 2 Attacks

Describe Layer 2 security using Cisco switches

Describe VLAN security

Implement VLANs and trunking

Implement spanning tree

Cisco Firewall Technologies

Describe operational strengths and weaknesses of the different firewall

technologies

Describe Stateful firewalls

Describe the types of NAT used in firewall technologies

Implement zone-based policy firewall using CCP

Implement the Cisco Adaptive Security Appliance (ASA)

Implement Network Address Translation (NAT) and Port Address Translation (PAT)

Cisco IPS

Describe Cisco Intrusion Prevention System (IPS) deployment considerations

Describe IPS technologies

Configure Cisco IOS IPS using CCP



VPN Technologies

Describe the different methods used in cryptography

Describe VPN technologies

Describe the building blocks of IPSec

Implement an IOS IPSec site-to-site VPN with pre-shared key authentication

Verify VPN operations

Implement Secure Sockets Layer (SSL) VPN using ASA device manager



640-760 SSPO (Service Provider Operations)

Exam Description

The 640-760 Supporting Cisco Service Provider IP NGN Operations exam is designed to

introduce entry level personnel to the SP network operations environment, processes

orientation, management tools and methods, and enables students to practice the primary

job roles and tasks. The exam is also intended to help prepare students for the Cisco

Certified Network Associate SP Operations (CCNA SP Operations) certification exam.

Exam Topics

The following information provides general guidelines for the content likely to be included

on the Supporting Cisco Service Provider IP NGN Operations exam. However, other related

topics may also appear on any specific delivery of the exam.

Perform the network incident management process

Describe how a trouble ticket processes through the network operations center

(NOC)

Identify key network incident metrics in a NOC incident report

Apply an incident management process

Perform incident management using basic tools and documentation

Close an incident ticket

Prioritize incident tickets according to standards

Escalate an incident ticket according to typical criteria

Create an RFC to implement a fix or workaround for an incident

Apply the problem management process

Apply the Information Technology Infrastructure Library (ITIL) problem

management process to the task of managing networks

Distinguish between incident management and problem management, and

determine the interactions that occur between them



Perform first-level network monitoring and troubleshooting

Use network management tools to monitor network status

Interpret device specific alarms and determine the severity of the alarm

Initiate troubleshooting procedures based on received alarms and/or log messages

Use network management tools to troubleshoot first-level network incidents

Use syslog functions, severity levels, syslog traps, and buffering

Use knowledge of IP fundamentals to determine the most likely cause of a network

problem

Determine most probable cause of a problem from standard output and SNMP traps

Utilize common structured troubleshooting approaches

Perform network configuration management

Backup configurations across standard NOC architectures

Interpret basic standard scripting commands used in automating network

maintenance

Interpret basic UNIX cron job commands used in automating network maintenance

Use a network inventory management process

Implement network changes and change management

Accurately document a network

Utilize a network change implementation rollback

Implement a network change based on change documentation

Perform a network upgrade

Identify upgrade or downgrade issues and recommend corrective actions

Verify the usability and effectiveness of a network change

Apply the fundamental concepts of service level agreements (SLAs)

Identify the unique characteristics of different SLAs

Inform customers about SLA issues

Monitor service levels against the requirements of an SLA



Describe basic IP technology in the Service Provider NOC

Describe the purpose and components of an IPv4 address

Describe the purpose of and components of IOS XR

Use IOS XR to perform basic router functions

Compare and contrast IPv4 to IPv6 addresses



640-875 SPNGN1 (SP-Next Generation Networks Part-1)

Exam Description

The 640-875 Building Cisco Service Provider Next-Generation Networks, Part 1 exam is

associated with the CCNA SP certification. This exam tests a candidates basic knowledge

and skills necessary to support a service provider network. Candidates can prepare for this

exam by taking the Building Cisco Service Provider Next-Generation Networks, Part 1

(SPNGN1) course.

Exam Topics


Building Cisco Service Provider Next-Generation Networks, Part 1 exam. However, other

related topics may also appear on any specific delivery of the exam. In order to better

reflect the contents of the exam and for clarity purposes, the guidelines below may change

at any time without notice.

IP Networks

Describe the purpose and functions of various network devices (at the core,

distribution, and access layers)

Identify the functional components required to meet a given network specification

Describe the OSI and TCP/IP models and their associated protocols to explain how

data flows in a network

Describe common network applications and their impact on the network

Interpret network diagrams

Troubleshoot common network problems at layers 1, 2, 3, 4, and 7 using a layered

model approach

Describe differences between LAN and WAN operation and features

IPv4 and IPv6 Addressing

Describe the structure of IPv4 and IPv6 addresses



Describe VLSM, CIDR and route summarization concepts

Describe the different types of IPv4 and IPv6 addresses

Design an IP Subnetting plan based on given requirements

Switched Network Technologies I

Describe bridging concepts and Layer 2 Ethernet frames

Configure basic Spanning Tree operations on Cisco IOS Switches

Interpret the output of various basic show and debug commands to verify the

operational status of a Cisco switched network

Configure basic switch security (i.e. port security, securing unused ports)

Describe Ethernet link bundling, LACP, and PAGP and Flex Links

Routed Network Technologies I

Describe Classful versus classless routing

Describe routing protocols basics (metrics, IGP versus EGP)

Describe RIPv1, RIPv2, RIPNG

Implement EIGRPv4 and EIGRPv6 on Cisco IOS, IOS-XE and IOS-XR routers

Describe route redistribution

Describe VRF

Describe GRE

IP Services

Configure NAT (IPv4) on Cisco routers

Configure DHCP (IPv4 and IPv6) operations on Cisco routers

Describe ICMPv4 and ICMPv6

Describe DNS

Cisco Operating Systems and Platforms I

Implement basic Cisco IOS, IOS-XE and IOS-XR CLI operations

Implement basic Cisco IOS, IOS-XE and IOS-XR routers configurations



Transport Technologies

Describe SONET and SDH

Describe DWDM, IPoDWDM, and ROADM

Configure 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet

interfaces on Cisco routers

Describe Frame Relay

Describe ATM

Describe Metro Ethernet

Describe DSL

Describe T1, T3, E1, E3, and ISDN

Implement PPP encapsulation on Cisco routers serial and POS interfaces

Describe cable (DOCSIS)

Describe the main BRAS and BNG routers functions in IP NGN

Describe various Passive Optical Network (PON) access technologies and FTTx

Security in the Network

Describe Layer 2 security features on Cisco IOS switches

Configure management plane security on Cisco routers and IOS switches

Describe IPsec

Describe control plane security

Configure basic AAA (TACACS+ and RADIUS) services on Cisco routers

Configure routing protocols authentication between Cisco routers

Describe the relationships between users, user groups, tasks groups and task IDs in

IOS-XR

Describe common types of network attacks

Network Management

Configure NTP server or client on Cisco routers

Configure IP SLA on Cisco routers



Configure CDP on Cisco routers and IOS switches

Configure SNMP on Cisco routers

Configure NetFlow on Cisco routers

Configure logging to Syslog server on Cisco routers

Describe the Cisco IOS Call-Home feature

Describe Cisco TAC procedure and navigate Cisco support tools (CCO)

Implement management access (SSH, telnet, and out-of-band management design)

Implement SPAN, RSPAN, and ERSPAN

Implement file transfers to manage network devices configurations and images

using FTP, SCP, TFTP, SFTP, and RCP



640-878 SPNGN2 (SP-Next Generation Networks Part-2)

Exam Description

The 640-878 Building Cisco Service Provider Next-Generation Networks, Part 2 exam is

associated with the Cisco CCNA Service Provider certification. This exam tests the

knowledge and skills that are necessary to implement and support a service provider

network. Candidates can prepare for this exam by taking the Building Cisco Service

Provider Next-Generation Networks, Part 2 (SPNGN2) course.

Exam Topics

The following topics are general guidelines for the content that is likely to be included on

the Building Cisco Service Provider Next-Generation Networks, Part 2 exam. However,

other related topics may also appear on any specific delivery of the exam. To better reflect

the contents of the exam and for clarity purposes, the guidelines that follow may change at

any time without notice.

IP NGN Architecture

Identify the functional components that are required to meet a given network

specification

Troubleshoot common network problems at Layers 1, 2, 3, 4, and 7 using a layered-

model approach

Describe the different types of service providers

Describe service provider principal and reference next-generation network (NGN)

architecture

Describe the IP address and autonomous system (AS) number allocation process via

the Internet

Assigned Numbers Authority (IANA) and Regional Internet Registries (RIRs)



Switched Network Technologies II

Configure enhanced switching technologies (including Rapid Spanning Tree

Protocol [RSTP], Multiple Spanning Tree [MST], and Per VLAN Spanning Tree

[PVST]) on Cisco IOS Software switches

Describe how VLANs create logically separate networks and the need for routing

between them

Configure VLANs on Cisco IOS Software switches

Configure trunking on Cisco IOS Software switches

Configure inter-VLAN routing

Configure Resilient Ethernet Protocol (REP) on Cisco IOS Software switches

Configure queue-in-queue (QinQ) on Cisco IOS Software switches

Routed Network Technologies II

Configure basic single-area Open Shortest Path First version 2 (OSPFv2) and OSPF

version 3 (OSPFv3) routing on Cisco routers

Configure basic single-area Intermediate System-to-Intermediate System (IS-IS)

routing on Cisco routers

Describe the differences between static versus dynamic routing as well as distance

vector versus link-state routing protocol operations

Configure basic Border Gateway Protocol (BGP) routing on Cisco routers

Describe the address family concept on Cisco routers

Describe IPv6 transitioning technologies

Configure First Hop Redundancy Protocol (FHRP) (including Hot Standby Router

Protocol [HSRP], Virtual Router Redundancy Protocol [VRRP], and Gateway Load

Balancing Protocol [GLBP]) on Cisco routers

Implement access control list (ACL) on Cisco routers

Describe carrier-grade NAT (CGN) and Network Address Translation 64 (NAT64)



Describe Multiprotocol Label Switching (MPLS) functions in the service provider IP

NGN

Configure Label Distribution Protocol (LDP) on Cisco routers

Cisco Operating Systems and Platforms II

Manage the Cisco IOS XR configurations and software packages

Describe Cisco IOS XE software packages

Describe Cisco service provider router platforms, their operating system, and their

placement in the service provider IP NGN



640-461 ICOMM v8.0 (Voice & Unified Communication)

Exam Description

The 640-461 Introducing Cisco Voice and Unified Communications (ICOMM) v8.0 exam is

associated with the CCNA Voice certification. This exam tests a candidate's knowledge of

the architecture, components, functionalities, and features of Cisco Unified

Communications solutions. It also tests the knowledge needed to perform tasks such as

system monitoring, moves, additions and changes on Cisco Unified Communications

Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and

Cisco Unified Presence. Candidates can prepare for this exam by taking the ICOMM v8.0

Introducing Cisco Voice and Unified Communications Administration v8.0 course.

Exam Topics


Introducing Cisco Voice and Unified Communications (ICOMM) v8.0 exam. However, other

related topics may also appear on any specific delivery of the exam. In order to better

reflect the contents of the exam and for clarity purposes, the guidelines below may change

at any time without notice.

Describe the characteristics of a Cisco Unified Communications solution

Describe the Cisco Unified Communications components and their functions

Describe call signaling and media flows

Describe quality implications of a VoIP network

Provision end users and associated devices

Describe user creation options for Cisco Unified Communications Manager and

Cisco Unified Communications Manager Express

Create or modify user accounts for Cisco Unified Communications Manager

Create or modify user accounts for Cisco Unified Communications Manager Express

using the GUI



Create or modify endpoints for Cisco Unified Communications Manager

Create or modify endpoints for Cisco Unified Communications Manager Express

using the GUI

Describe how calling privileges function and how calling privileges impact system

features

Create or modify directory numbers

Enable user features and related calling privileges for extension mobility, call

coverage, intercom, native presence, and unified mobility remote destination

configuration

Enable end users for Cisco Unified Presence

Verify user features are operational

Configure voice messaging and presence

Describe user creation options for voice messaging

Create or modify user accounts for Cisco Unity Connection

Describe Cisco Unified Presence

Configure Cisco Unified Presence

Maintain Cisco Unified Communications system

Generate CDR and CMR reports

Generate capacity reports

Generate usage reports

Generate RTMT reports to monitor system activities

Monitor voicemail usage

Remove unassigned directory numbers

Perform manual system backup



Provide end user support

Verify PSTN connectivity

Define fault domains using information gathered from end user

Troubleshoot endpoint issues

Identify voicemail issues and resolve issues related to user mailboxes

Describe causes and symptoms of call quality issues

Reset single devices

Describe how to use phone applications



640-722 IUWNE (Wireless Network Essentials)

Exam Description

The 640-722 Implementing Cisco Unified Wireless Network Essential (IUWNE) exam is the

exam associated with the CCNA Wireless certification. This exam tests a candidate's

knowledge of installing, configuring, operating, and troubleshooting small to medium-size

WLANs. Candidates can prepare for this exam by taking the Implementing Cisco Unified

Wireless Network Essential (IUWNE) course.

Exam Topics

The following information provides general guidelines for the content likely to be included

on the Implementing Cisco Unified Wireless Networking Essentials (IUWNE) exam.

However, other related topics may also appear on any specific delivery of the exam.

Describe WLAN fundamentals

Describe basics of spread spectrum technology

Describe the impact of various wireless technologies (Bluetooth, WiMAX, ZigBee,

and cordless phone)

Describe wireless regulatory bodies, standards and certifications (FCC, ETSI,

802.11a/b/g/n, and Wi-Fi Alliance)

Describe Wireless LAN (WLAN) RF principles (antenna types, RF gain/loss, Effective

Isotropic Radiated Power (EIRP), refraction, reflection, and so on)

Describe networking technologies used in wireless (SSID to WLAN_ID to Interface to

VLAN, 802.1q trunking)

Describe wireless topologies, such as Independent Basic Service Set (IBSS), Basic

Service Set (BSS), Extended Service Set (ESS), Point-to-Point, Point-to-Multipoint,

Mesh, and bridging)

Describe 802.11 authentication and encryption methods (Open, Shared, 802.1X,

EAP, TKIP, and AES)



Describe frame types (associated and unassociated, management, control, and data)

Describe basic RF deployment considerations related to site survey design of data or

VoWLAN applications, common RF interference sources such as devices, building

material, AP location, and basic RF site survey design related to channel reuse,

signal strength, and cell overlap

Install a basic Cisco wireless LAN

Identify components of Cisco Unified Wireless Network architecture (Split MAC,

LWAPP, stand-alone AP vs controller-based AP, specific hardware examples)

Install and configure autonomous access points in the small business environment

Describe the modes of controller-based AP deployment (local, monitor, HREAP,

sniffer, rogue detector, bridge, OEAP, and SE-Connect)

Describe controller-based AP discovery and association (DHCP, DNS, Master

Controller, Primary-Secondary-Tertiary, and n+1 redundancy)

Describe roaming (Layer 2 and Layer 3, intra-controller and inter-controller, and

mobility list)

Configure a WLAN controller and access points WLC: ports, interfaces, WLANs, NTP,

CLI and Web UI, CLI wizard, and link aggregation group (LAG) AP: Channel and

Power

Describe Radio Resource Management (RRM) fundamentals including ED-RRM.

Verify basic wireless network operation

Install Wireless Clients

Describe client WLAN configuration requirements, such as Service Set Identifier

(SSID), security selection, and authentication

Identify basic configuration of common wireless supplicants (Macintosh, Intel

Wireless Pro, Windows, iOS, and Android)

Describe basic Any Connect 3.0 or above wireless configuration parameters

Identify capabilities available in CCX versions 1 through 5



Implement basic WLAN Security

Describe the general framework of wireless security and security components

(authentication, encryption, MFP, and IPS)

Describe the evolution of supported authentication methods (PSK, 802.1X including

EAP-TLS, EAP-FAST, PEAP, LEAP, and WPA/WPA2)

Configure the different sources of authentication (EAP-local or -external, and

Radius)

Configure authentication and encryption methods on a WLAN (WPA/WPA2 with

PSK and 802.1x)

Implement wireless Guest networking

Operate basic WCS

Identify key functions of Cisco Wireless Control System (WCS) and Navigator

Navigate WCS interface

Configure controllers and access points (APs) Use preconfigured maps in the WCS

(adding/relocating/removing access points, turn on/off heat maps, view client

location, and view Clean Air zones of influence)

Use the WCS monitor tab and alarm summary to verify the WLAN operations

Generate standard WCS reports (inventory, Clean Air, client-related, AP-related, and

utilization)

Conduct basic WLAN Maintenance and Troubleshooting

Identify and use basic WLAN troubleshooting tools (WLC show debug and logging)

for client to AP connectivity, AP to controller connectivity

Use the WCS client troubleshooting tool

Transfer logs, configuration files, and O/S images to and from the WLC via the GUI

Differentiate and use WLC and AP (autonomous and LAP) management access

methods (console port, CLI, telnet, ssh, http, https, and wired vs wireless

management)



CISCO Certification Path & Pyramid



Industry Interface Program

Projects

Modular Assignments

Mini Projects

1 Major Project

Domains / Industry

Retail Industry

Banking & Finance

Service

E-Commerce

Manufacturing & Production

Web Application Development

Research & Analytics

HR & Consultancy

FMCG

Consumer Electronics

Event Management Industry

Telecom



Training & Performance Tracking

Knowledge related to current technology aspects and corporate level deliverable &

Continuous training and assessment to make you industry ready. Throughout the Training

Curriculum Candidate will go through a Scheduled Assessment Process as below:

Continues Assessments

Practical Workshops

Modular Assignments

Case Studies & Analysis

Presentations (Latest Trends & Technologies)

Tech Seminars

Technical Viva

Observing live Models of various projects

Domain Specific Industry Projects



Skills Development Workshop

Communication is something which all of us do from the very first day of our life, yet there

is a question that haunts us most of the time “Did I express myself correctly in such and

such situation?” The answer to this question is really tricky, because in some cases we

leave our signatures and good impression but in some others we even fail to get our idea

clearly. It happens mostly because we don’t know how to act in certain situations. Every

time we fail we don’t lose completely, we do learn something, but prior knowledge of the

same thing could be more beneficial because then we could have turned that failure into

success.

The course / workshop would focus at many aspects of personality, like:

Building positive relationships with peers & seniors

Building self-confidence & Developing clear communication skills

Exploring and working on factors that help or hinder effective interpersonal

communication

Learning impacts of non-verbal behavior & Dealing with difficult situations and

difficult people

Workshops Consists of Following Activities:

Personality Development

Group Discussions & Debates

Seminars & Presentations

Case Studies & Analysis

Corporate Communication Development

HR & Interview Skills

Management Games & Simulations

Aptitude, Logical & Reasoning Assessments & Development


Documents

CCNA the purpose and types of ACLs Configure and apply ACLs based on network filtering requirements using SDM and CLI