CCNA R&S 6 - IT-Bildungsnetz · PDF file · 2017-09-01CCNA Routing and Switching Complete Study Guide: Exams 100-105, 200-105, 200- ... Integrate the new content into existing CCNA

CCNA R&S 6.0 The way to teach! Thomas Meuser,

based on presentations of Cisco product and technical managers

April 2017

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2

Übersicht aktuelles NetAcad-Kurs-Portfolio

SmartGrid

Kurs auch auf Deutsch!

Cisco Confidential © 2012 Cisco and/or its affiliates. All rights reserved. 3


• Develop and release CCNA R&S 6.0 courses based on:

New certification alignment Latest industry requirements and Cisco digitization strategy Feedback from NetAcad instructors

• Teach fundamental and essential networking knowledge

• Address certification gap in a timely manner with the CCNA R&S 6.0 Bridging Course

NEW Cisco CCNA R&S Certifications announced May 17, 2016


• Continue to teach CCNA R&S 5.X courses

• Leverage the CCNA R&S 6.0 Bridging Course to align to the new CCNA R&S certifications

• Adopt the CCNA R&S 6.0 courses when they become available


• Instructors do not need to be re-accredited to teach CCNA R&S 6.0

• There are no changes to CCNA R&S lab equipment

• Upgrade to Packet Tracer 6.3, better 7.0

Qty. Product Number

3 CISCO1941/K9

3 WS-C2960+24TC-L

The 2901 and 2911 routers are Out-of-Sale. They will be replaced by 4321 routers soon.


Course Language Availability

Introduction to Networks (ITN) v6.0 English Nov 2016

Routing and Switching Essentials (RSE) v6.0 English Nov 2016

Introduction to Networks (ITN) v6.0 French and Spanish Nov 2016

Introduction to Networks (ITN) v6.0 German March 1st 2017

Routing and Switching Essentials (RSE) v6.0 German - Validation has started August 2017 timeframe


Course Language Availability

Scaling Networks (ScaN) v6.0 English July 2017

Connecting Networks (CN) v6.0 English July 2017

ScaN and CN v6.0 German None !!


Ciscopress.com: http://www.ciscopress.com/markets/detail.asp?st=44750 Way to order free copies: ciscopress.com/irc

T. Lamm

le: CC

NA R

outing and Switching

Com

plete Study Guide: Exam

s 100-105, 200-105, 200-125 , O

ktober 2016, ISBN

: 1119288282

http://www.ciscopress.com/markets/detail.asp?st=44750



• All technical content and quizzes are within the course

• Content order is based on the order for CCNA 6.0 courses

• No new equipment needed to teach bridge

• No instructor training required

• Upgrade to Packet Tracer 6.3 (or 7.0)

• Quiz defaults: • Published – may choose to unpublish quizzes • Quiz grades do not show in the course gradebook


• Course Content 4 bridging modules (it’s not an online curriculum) 9 hands-on labs & 11 Packet Tracer activities 3 topic quizzes & 4 module quizzes



Introduction to Networks

Routing & Switching Essentials Scaling Networks Connecting Networks

Extended Traceroute Host Routes VTP, Extended VLANs, and DTP WAN Topologies DMVPN

Debugging Device Discovery Troubleshoot Multi-VLAN Implement PPPoE

Network Troubleshooting NTP Switch Stacking Implement eBGP

Password Recovery Implement HSRP (S) Common IPv6 ACL Errors

Troubleshoot Multi-area OSPF LAN Security Best Practices

SNMPv3 Configuration

SPAN

Quality of Service

Cloud and Virtualization

Hands-on Lab Packet Tracer Lab Network Programming

Using IP SLA https://www.netacad.com/group/resources/ccna-rs-bridge/6.0

https://www.netacad.com/group/resources/ccna-rs-bridge/6.0


1

2


• Classroom Resources • Lab Resources • Instructor Training

Resources • Product Introduction

Resources




1

2


1. Create a Bridge Course with all four modules and enroll students

2. Integrate the new content at the end of Routing and Switching Essentials and Connecting Networks

3. Integrate the new content at the end of each course

4. Integrate the new content into existing CCNA R&S 5.X chapter


• A Self-paced CCNA R&S 6.0 Bridging Course will be offered to NetAcad student alumni

• Available on NetSpace since May 2016


1

2




1


Curriculum can be down-loaded from the materials of an open class only


1

2


4

3


3

4



Introduction to Networks

Routing & Switching Essentials Scaling Networks Connecting Networks

Host Routes WAN Topologies DMVPN

Password Recovery Common IPv6 ACL Errors

Extended Traceroute NTP Switch Stacking LAN Security Best Practices

Debugging Device Discovery Implement HSRP SNMPv3 Configuration

Network Troubleshooting Troubleshoot Multi-area OSPF Implement PPPoE & eBGP

VTP, Extended VLANs, and DTP SPAN

Troubleshoot Multi-VLAN Cloud and Virtualization

Network Programming

Quality of Service

Page

Topic

Section

Chapter


Introduction to Networks Routing & Switching Essentials Scaling Networks Connecting Networks

None

Dynamic Routing (additional depth)

Single-Area OSPF

DTP

SVI Inter-VLAN Routing

Inter-VLAN Routing Troubleshoot

LAN Security

Extended IPv4 ACLs

All IPv6 ACLs

Page

Topic

Section

Chapter


Introduction to Networks Routing & Switching Essentials Scaling Networks Connecting Networks

None

CIDR and VLSM Review EIGRP Summarization Remote Access

RIPng, Summary Routes Secure EIGRP IPsec

OSPF Summarization NetFlow

Wireless LANs Secure OSPF Frame Relay

Wireless LANs

Page

Topic

Section

Chapter


Network Testing and Verification How to use the extended traceroute (like extended ping) How to use the tracert options on a Windows PC How to use debugging commands Warning to use unspecified debug in real networks (e.g. debug ip packets) Stop data capturing (undebug all – u al) Re-direct log messages on a Telnet or SSH using ‘terminal monitor’

Network Troubleshooting Basic Troubleshooting Approaches Describe how to use the show, debug, ping, and traceroute commands

for network troubleshooting.


1. ping default gateway from PC; in case of failure check using ‘ipconfig’ on PC-A and ‘sh ip int brief’ on R1

2. ping serial interface of R1 from PC; see step 1. 3. ping serial interface of ISP;

in case of failure check using ‘sh ip int brief’ and ‘sh ip route’ on R1 4. ping external server; in case

of failure check ‘ipconfig’ on server or ‘sh ip route’ ‘sh ip protocols’ on ISP 5. if neccessary check all routers in the same way


Create a Host Route (subnet mask equal /32) • Automatically listed as Local interface in the routing table when an IP

address is configured on the router • It can be configured as a static host route • Host route automatically obtained through a routing protocol like OSPF

Device Discovery using CDP and LLDP • Link discovery protocol that is used to gather information about devices

which share the same data link • Each device sends periodic CDP advertisements to connected devices.

Advertisements share information about the type of device, the name of the devices, and the number and type of the interfaces.

• CDP is Cisco proprietary Layer 2 protocol whereas LLDP is an open, vendor neutral protocol also for non-Cisco devices


R1# show cdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA, M - Two-port Mac Relay Device ID Local Intrfce Holdtme Capability Platform Port ID S1 Gig 0/1 122 S I WS-C2960- Fas 0/5

R1# show cdp neighbors detail ------------------------- Device ID: S1 Entry address(es): IP address: 192.168.1.2 Platform: cisco WS-C2960-24TT-L, Capabilities: Switch IGMP Interface: GigabitEthernet0/1, Port ID (outgoing port): FastEthernet0/5 Holdtime : 136 sec Version : Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE7, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Thu 23-Oct-14 14:49 by prod_rel_team advertisement version: 2 Protocol Hello: OUI=0x00000C, Protocol ID=0x0112; payload len=27, value=00000000FFFFFFFF010221FF000000000000002291210380FF0000 VTP Management Domain: '' Native VLAN: 1 Duplex: full Management address(es): IP address: 192.168.1.2

1

2

S1# show cdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA, M - Two-port Mac Relay Device ID Local Intrfce Holdtme Capability Platform Port ID S2 Fas 0/4 158 S I WS-C2960- Fas 0/4 R1 Fas 0/5 136 R B S I CISCO1941 Gig 0/1

telnet auf Switch S1 und erneut cdp 3

4


Configure and verify NTP – Network Time Protocol • NTP enables routers to synchronize time settings with an NTP server (local

master clock or publicly available NTP server on the Internet • NTP networks use a hierarchical system of time sources with each level

called a stratum (0 = is the authoritative time source) R1# show clock detail

20:55:10.207 UTC Fri Dec 11 2015 Time source is user configuration

R1(config)# ntp server 209.165.200.225 R1(config)# end

R1# show clock detail 21:01:34.563 UTC Fri Dec 11 2015 Time source is NTP

R1# show ntp associations address ref clock st when poll reach delay offset disp *~209.165.200.225 .GPS. 1 61 64 377 0.481 7.480 4.261 * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured R1# show ntp status Clock is synchronized, stratum 2, reference is 209.165.200.225


Passwort Discovery • If any password is lost or unknown, then password recovery must be performed

to access a network device • This procedure cannot be done remotely as you must have physical access and

console access to the device • Steps are slightly different for different Cisco devices

• Step 1: Enter the ROMMON mode - break power on sequence or remove flash • Step 2: Change config-register to 0x2142 to ignore the startup config file • Step 3: Reset / reboot the device – it should look like an un-configured device • Step 4: Enter enable mode and load the start-up configuration • Step 5: Make necessary password changes and save configuration • Step 6: Set back the config-register to 0x2102 and reload the device


VTP, Extended VLANs, and DTP • Implement VTP • Explain how to delete a VLAN and troubleshoot DTP and VTP configurations • Topics have been part of CCNA, version 4.x. Now there are back again

Implement HSRP (Hot Standby Routing Protocol) • HSRP operation – more detailed view as in version 5.x • Configure, verify, and troubleshoot HSRP; in version 5.x included in a hand-

on lab, now extended as section of the curriculum


Explain how switch stacking improves STP deployment • Up to 9 connected switches, the stack master controls all stack members • The master contains the configuration files for the stack • each member has a current copy for backup and is an eligible master • Layer 2 and Layer 3 protocols present the entire switch stack as a single

entity to the network. • Switch stacks are managed using a single IP address


Switch stacks help to reduce the impact of diameter on STP recon-vergence deployment; IEEE recommends a maximum of 7switches

• Switch stacking also has the ability to add more switches to a single STP instance without increasing the STP diameter.

• In a switch stack, all switches use the same bridge ID for a given spanning-tree instance.

• mbers


Troubleshooting Multiarea OSPF – understand operation and data flows Data Structure Description Interface table

sh ip ospf interface •Table includes a list of all active OSPF enabled interfaces. •Type 1 LSAs include the subnets associated with each active interface.

Neighbor table

sh ip ospf neighbor

•Table is used to manage neighbor adjacencies using hello timers and dead timers. •Neighbor entries are added and refreshed when a hello is received. •Neighbors are removed when the dead timer expires.

Link-state database

sh ip ospf database

•This is the primary data structure used by OSPF to store network topology information. • It includes full topological information about each area that the OSPF router is connec-ted to, as well as any paths that are available to reach other networks or AS.

Routing table

sh ip route •After the SPF algorithm is calculated, the best routes to each network are offered to the routing table.


WAN Technologies Overview - Explanation of a WAN topologies only.

Describe Dynamic Multipoint VPN (DMVPN) - Cisco software solution for building multiple VPNs in an easy, dynamic, and scalable manner.

Implement a Cisco router with PPPoE (PPP over Ethernet). A customer’s router is connected to the ISP router using DSL. Both routers have been configured for PPPoE. Curriculum only include troubleshooting of PPPoE using show and debug

eBGP (external Border Gateway Protocol) is an Exterior Gateway Protocol used to route between networks administered by two different organizations Overview, basic configuration and verification. Configure eBGP in a single-homed remote access network.


Troubleshoot common IPv6 ACL errors using CLI commands in 3 scenarios

LAN Security - Explain how to mitigate common LAN security attacks Use DHCP snooping to mitigate DHCP spoofing attacks AAA with RADIUS and TACACS+ IEEE 802.1X as a port-based access control and authentication protocol

Configure SNMPv3 to monitor network operations in a small to medium-sized business network.

Troubleshoot a network problem using Cisco Switch Port Analyzer (SPAN).


QoS Overview on purpose and characteristics of QoS. Improve network transmission quality by prioritizing traffic Transmission quality is based on bandwidth, congestion, delay, and jitter Voice, video, and data have different traffic chacteristics Explanation of different queuing algorithms

QoS Mechanisms - how networking devices implement QoS Three QoS policy models: Best Effort, Integrated Services, and Differentiated Services Three QoS tool classes:


Explain why cloud computing and virtualization are necessary for evolving networks. Introduction to: Cloud Services, Cloud Models and Cloud Computing Virtualization, Abstract layers, and Hypervisor

Explain why network programmability is necessary for evolving networks. Introduction to Software Defined Networking (SDN)

• IP Service Level Agreements (IP SLAs) are a feature of the Cisco IOS that allows the analysis of IP service levels. IP SLAs use generated ICMP echo-based traffic to measure network performance between two networking devices, multiple network locations, or across multiple network paths. IP SLA configuration is shown

Documents

CCNA R&S 6 - IT-Bildungsnetz · PDF file · 2017-09-01CCNA Routing and Switching Complete Study Guide: Exams 100-105, 200-105, 200- ... Integrate the new content into existing CCNA