www.ccna5answers.com www.ccna5blog.com www.ccna-5.com

CCNA 3 Chapter 1 Exam Answer v5 & v5.02 2015 (100%)

1. Which two features of enterprise class equipment assists an enterprise network in maintaining 99.999 percent up-time? (Choose two.)

o failover capabilitieso collapsed coreo redundant power supplieso failure domainso services module

2. Refer to the exhibit. Which devices exist in the failure domain when switch S3 loses power?

o S4 and PC_2o PC_3 and AP_2o AP_2 and AP_1o PC_3 and PC_2o S1 and S4

www.ccna5answers.com 1

2

3. Which design feature will limit the size of a failure domain in an enterprise network?

o the use of a collapsed core designo the use of the building switch block approacho the installation of redundant power supplieso the purchase of enterprise equipment that is designed for large traffico volume

4. How can an enterprise network be designed to optimize bandwidth?o by installing devices with failover capabilitieso by limiting the size of failure domainso by deploying a collapsed core modelo by organizing the network to control traffic patterns

5. Which technology is required when switched networks are designed to include redundant links?

o link aggregationo Spanning Tree Protocolo virtual private networkso virtual LANs

6. A network administrator is planning redundant devices and cabling in a switched network to support high availability. Which benefit will implementing the Spanning Tree Protocol provide to this design?

o Multiple physical interfaces can be combined into a single EtherChannel interface.o Redundant paths can be available without causing logical Layer 2 loops.o Network access can be expanded to support both wired and wireless devices.o Faster convergence is available for advanced routing protocols.

7. What are two benefits of extending access layer connectivity to users through a wireless medium? (Choose two.)

o increased flexibilityo decreased number of critical points of failureo reduced costso increased bandwidth availabilityo increased network management options

8. As the network administrator you have been asked to implement EtherChannel on the corporate network. What does this configuration consist of?

o providing redundant links that dynamically block or forward traffico grouping multiple physical ports to increase bandwidth between two switcheso grouping two devices to share a virtual IP addresso providing redundant devices to allow traffic to flow in the event of device failure

9. Which statement describes a characteristic of Cisco Meraki switches?o They promote infrastructure scalability, operational continuity, and transport

flexibility.o They are cloud-managed access switches that enable virtual stacking of switches.o They are campus LAN switches that perform the same functions as Cisco 2960

switches.o They are service provider switches that aggregate traffic at the edge of the network.

10. In which situation would a network administrator install a Cisco Nexus Series or Cisco Catalyst 6500 Series switch to promote infrastructure scalability?

o to enable virtual stacking of switches to provide cloud-managed accesso on a service provider network to promote integrated security, and simplified

managemento on a data center network to provide expansion and transport flexibilityo on a campus LAN network as access layer switches

www.ccna5answers.com www.ccna5blog.com www.ccna-5.com

11. Which statement describes a characteristic of Cisco Catalyst 2960 switches?

o They do not support an active switched virtual interface (SVI) with IOS versions prior to 15.x.

o They are best used as distribution layer switches.o They are modular switches.o New Cisco Catalyst 2960-C switches support PoE pass-through.

12. A network engineer is reviewing a network design that uses a fixed configuration enterprise router that supports both LAN and WAN connections. However, the engineer realizes that the router does not have enough interfaces to support growth and network expansion. Which type of device should be used as a​​ replacement?

o a Layer 3 switcho a modular routero a PoE deviceo another fixed configuration router

13. What are two functions of a router? (Choose two.)o It connects multiple IP networks.o It controls the flow of data via the use of Layer 2 addresses.o It determines the best path to send packets.o It manages the VLAN database.o It increases the size of the broadcast domain.

14. Which two requirements must always be met to use in-band management to configure a network device? (Choose two.)

o a direct connection to the console porto a direct connection to the auxiliary porto a terminal emulation cliento at least one network interface that is connected and operational o Telnet, SSH, or HTTP access to the device

15. Why would a network administrator issue the show cdp neigbors command on a router?

o to display device ID and other information about directly connected Cisco deviceso to display router ID and other information about OSPF neighborso to display line status and other information about directly connected Cisco deviceso to display routing table and other information about directly connected Cisco devices

16. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

o show flasho show NVRAMo show startup-config o show running-configo show version

17. What is a characteristic of in-band device management?o It uses a terminal emulation client.o It is used for initial configuration or when a network connection is unavailable.o It uses a direct connection to a console or AUX port.o It is used to monitor and make configuration changes to a network device over a

network connection.

www.ccna5answers.com 3

4

18. Mach the purpose to the related configuration item. (Not all options are used.)

CCNA 5 Answers:

CCNA 1 Chapter 1 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 10 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 11 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 2 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 3 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 4 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 5 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 6 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 7 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 8 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter 9 Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Chapter and Final Exam Answer 2015 (100%) CCNA 1 Final Exam Answer v5 & v5.02 2015 (100%) CCNA 1 Practice Final Exam Answer v5.02 2015 (100%) CCNA 1 Pretest Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 1 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 10 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 11 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 2 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 3 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 4 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 5 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 6 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 7 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 8 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter 9 Exam Answer v5 & v5.02 2015 (100%) CCNA 2 Chapter and Final Exam Answer 2015 (100%) CCNA 2 Final Exam Answer v5 & v5.02 2015 (100%)

www.ccna5answers.com www.ccna5blog.com www.ccna-5.com

CCNA 2 Practice Final Exam Answer v5.02 2015 (100%) CCNA 2 RSE Practice Skills Assessment – PT 2015 (100%) CCNA 3 Chapter 1 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 2 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 3 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 4 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 5 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 6 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 7 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 8 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Chapter 9 Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Final Exam Answer v5 & v5.02 2015 (100%) CCNA 3 Practice Final Exam Answer v5.02 2015 (100%) CCNA 3 Pretest Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 1 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 2 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 3 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 4 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 5 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 6 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 7 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 8 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter 9 Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Chapter and Final Exam Answer 2015 (100%) CCNA 4 Final Exam Answer v5 & v5.02 2015 (100%) CCNA 4 Practice Final Exam Answer v5.02 2015 (100%) CCNA 4 Pretest Exam Answer v5 & v5.02 2015 (100%) ITE Chapter and Final Exam Answer 2015 (100%) ITE Final Exam Answer v5 & v5.02 2015 (100%)

www.ccna5answers.com 5