Upload
gregggh
View
1.127
Download
4
Tags:
Embed Size (px)
DESCRIPTION
In Canada and need Marine supplies & Parts ? ... see dtauto.ca or petespaint.ca or autobarn.ca for a good value purchase for CC Marine items. Steering Parts for Marine
Citation preview
STEERING&CONTROLS
Mfr. No. ORDER N0.Champion Trim Cap (Plastic) 3879414 (B) 387-94140Stealth Trim Cap (Plastic) 3879414 (B) 387-94140Viper Trim Cap (Plastic) 3879414 (B) 387-94140Wheel Hardware Kit (Mechanical) 2745417P 069-27454Talon Trim Cap (Polyurethane) 3878515 (A) 387-85150Service Kit for Sea Star Helm HP 6032 037-60320
WHEEL DIMENSIONSThe dimensions shown in the chart are referencedimensions. Actual dimensions may vary slightly.
SERVICE ITEMS
(A) 3878515 Talon (B) 3879414 Champion/Stealth/Viper
(D) HP6032Service Kit for SeaStar Helms
(C) 2745417PMechanical Helm WheelHardware Kit
FEATURES• Beautiful, high-detail styling. • Rugged construction for marineuse. • U.V. and corrosion resistant materials. • Stylish centremedallion included. • For helms with standard marine round3/4" tapered shaft. • All styles suitable for mechanical steering• Equidistant-spoke model (Talon) offered for use with hydraulicsteering systems. • Meet or exceed all applicable industryrequirements.
WHEEL RIM SPOKE DIMENSIONORDER NO. MFR.NO. TYPE SIZE COLOUR “A” “B”
3 SPOKE Aluminum Spokes, Soft Urethane or PVC Grip083-52022 SW52022P Viper 14" Black 1.1" 2.2"
6-SPOKE Stainless Steel Spokes, Hard PVC Grip083-56811 SW56811P Talon* 14" SS 1.5" 2.6"
3-SPOKE Hard PVC Grip105-59291 SW59291P Champion 13.5" Black 1.6" 2.3"083-59401 SW59401P Stealth (w/cover) 14" Black 1.3" 2.8"083-59491 SW59491P Stealth (w/cap) 14" Black 2.1" 2.8"083-59691 SW59691P Ace 13" Black 1.3" 2.3"
ACEORDER NO. 083-59691
STEALTH (w/cap)ORDER NO. 083-59491
CHAMPION (w/cap)ORDER NO. 105-59291
TALONORDER NO. 083-56811*
STEALTH (w/cover)ORDER NO. 083-59401
VIPERORDER NO. 083-52022
See Note Below
For helms with standard round 3/4" tapered shafts
SERVICE ITEMS
*Equidistant spokes recommended for hydraulic steering where “master” spoke cannot be maintained.
For more information see: www.teleflexmarine.com
MARINE STEERING WHEELS
2
STEERING WHEEL DIMENSIONS & DATA
DESCRIPTION Mfr. No. ORDER NO.
Legend Wheel - Soft Rim 12-2820AC 122-82000
Legend Wheel - Hard Rim 12-2800AC 122-80000
Centre Only 12-2900 122-90000
DESCRIPTION Mfr. No. ORDER NO.
Viper Wheel - Soft Rim 12-2502AC 122-50200
Viper Wheel - Hard Rim 12-2503AC 122-50300
Replacement Centre Only 12-2540 122-54000
For more information see: www.detmarcorp.com
• Soft hand grip, UV stable polyurethane • Silver spokes • Diameter - 13.8"• Fits 3/4" tapered shaft • CE certified
Steering Wheel - Black Grip ORDER NO. 762-10000Steering Wheel - White Grip ORDER NO. 762-20000
Modern 3-spoke design with a variety ofcentre cap design options. Hard grip andsoft grip rim options feature rich leathergrain and stitching.Wheel Diameter: 13-1/2"Dish: 3-5/8"
V60 ANTIGUA
LEGEND
STAINLESS STEEL STEERING WHEEL V43 STAINLESS STEEL
This highly - styled, sport wheel providesa distinctive, clean appearance from frontand rear viewing angles.Features include:• Hard and soft grip rim options.• Texture/finish - rim is leather grainedwith finger grips and stitching.
• Wheel Diameter: 13-1/2"• Dish: 4.0"
Corse W/S White Soft GripCorse B/S Black Soft Grip
This classic sport wheel designfeatures hard grip and soft grip rimoptions with leather grainappearance. Centre cap acceptsround custom logos.Wheel Diameter: 13"Dish: 3-1/8"
A : Diameter 15-1/8''B : Fits 3/4''Tapered ShaftC : 3-1/2''D : 10°6 Spoke
Non-magnetic stainless steel wheel constructedof high grade stainless steel, Wheel has a castand welded hub and welded spokes at the rim.Fits Standard 3/4" tapered shaft.ORDER NO. 762-20043
All Antigua steering wheels are provided with an exclusive hubthat easily allows the steering wheel to always be aligned properly.Steering wheels meet the EEC directive 94/25 requirements forpleasure boats.All steering wheels are CE marked in conformity with theEN 28848 - EN 29775 and ABYC P22 safety standards.• 13.8" (350 mm) Diameter• Black Spokes• Thermoplastic Antishock Material• Standard 3/4" Taper• Complete with HubORDER NO. 762-30060 Mfr. No. V60
DETMAR steering wheels are designed and manufactured to meet the rigorous physical andenvironmental demands of marine and other outdoor applications. All wheels are built around heavyduty, non-magnetic, high impact plastic frameworks with hard and soft rim options available. All blackand coloured materials used are completely U.V. resistant. All products meet ABYC P-22 and ISO 8848standards. Fit all standard 3/4" tapered shafts. The Legend wheel series offers an
advanced four-spoke design. Thesteering wheel’s highly contoured threedimensional shape integrates well withthe latest ergonomic interior designs.Hard grip and soft grip rim optionsfeature rich leather grain, stitching andfinger grips.Wheel Diameter: 13-1/2"Dish: 3-7/8"
See: www.uflexusa.com
DESCRIPTION Mfr. No. ORDER NO.
Daytona Wheel - Soft Rim 2-28-2C 122-22820
Replacement Centre Only 12-2103 122-10300
SPORT
VIPER
DAYTONA
Formed 304 stainless steel15" SST Steering Wheel ORDER NO. 422-30115Replacement Centre Cap (Black) ORDER NO. 422-30101
See: www.sea-dog.com
Dimensions:A : 15.5", 394 mmB : 4.25", 108 mm
DESCRIPTION Mfr. No. ORDER NO.
Sport Wheel - Soft Rim 12-2600AC 122-60000
Sport Wheel - Hard Rim 12-2603AC 122-60300
Centre Only 12-2680 122-68000
Not exactly as pictured
CORSE 3-SPOKE
3
MARINE STEERING WHEELS
STAINLESS STEEL STEERING WHEELS
857-7101322
SPORTClassic Stainless Steel T-304 Flat-Spoke wheel. Finger grip rim and control knob.Stainless steel centre cap. Fits 3/4" tapered shaft.
ORDER NO. Mfr. No. Diameter Spoke Size Degree of Dish857-4161321 4161321FGK 13.5" 1/8" 22°
DESTROYER 5-SPOKEClassic 5-Spoke Stainless Steel T-304 wheel. Finger grip rim and control knob.Stainless steel centre cap. Fits 3/4" tapered shaft.
ORDER NO. Mfr. No. Diameter Spoke Size Degree of Dish857-1731521 1731521FGK 15.5 1/2" Thick 22°
VISIONTraditional Cast Stainless Steel T-316L wheels. Cast 316L Stainless Steel centre spoke andcentre nut with 5/8"-18 thread. Finger grip rim with or without control knob.Fits 3/4" tapered shaft.
ORDER NO. Mfr. No. Diameter Ring Type Control Knob857-7101321 7101321FG-758 13.5" Stainless No857-7101322 7101321FGK-758 13.5" Stainless Yes
EVOLUTIONPremium Cast Stainless Steel T-316L wheels, cast 316L Stainless centre spoke and centrenut with 5/8"-18 thread. Finger grip rim. Fits 3/4” tapered shaft.
ORDER NO. Mfr. No. Diameter Ring Type Control Knob857-7201321 7201321FG-758 13.5" Stainless No
CENTRE NUTS FOR VISION & EVOLUTION SERIES WHEELSORDER NO. Mfr. No. Thread Size Fits857-0000702 702NUT 12mm Most Manual Steering Systems857-0000712 712NUT 1/2"-20 Uflex Steering Systems
For more information see: www.schmittsteering.com
857-021111
857-1731521
STELLAAll Stella wheels include assembled 3/4" tapered (1.75" length) and black plastic cap.Ergonomically advanced polyurethane wheels.
ORDER NO. Mfr. No. Series Dia. Spoke PU Colour857-013101 PU013101 Fantasy 13.5" Brushed Black857-026101 PU025101-C Folletto 14" Polished Black857-021111 PU021111 Folletto 14" Black w/Burl Inserts Black
POLY PROEconomical Poly Pro wheels. Available with hard plastic or soft touch vinyl grip.Fits 3/4" tapered shaft.ORDER NO. Mfr. No. Series Dia. Spoke Rim Colour Grip857-118101 KP118101 Huron 13.75" Black Black Soft857-088101 KP088101 Delta 13.5" Black Black Hard
857-088101
857-4161321
857-013101 857-026101
857-7201321
4
MARINE STEERING WHEELS
For more information see: www.detmarcorp.com
422-30107
Molded of high impact plastic.The textured black lid is hinged with stainless steel pins and contains amarine push-button lock with two keys.In open position lid serves as a beverage holder.Door Dimensions: 13-1/2" L x 5-1/2" HBox Dimensions: 11-7/8" L x 4-3/8" H x 6-3/4" DInstallation Hole Size: 12-1/8" L x 4-5/8" H
ORDER NO.103-03310 Mfr. No. 331
856-50003
Originally Designed for Viking YachtsA great wheel for sport fishing boats with outside orfly bridge controls• High Polished, Cast 316 Stainless Steel• For 3/4" Teleflex Tapered Shaft• 15-1/2" Diameter• 5/8" - 18 Center Nut Thread
Formed 304 Stainless Steel
• 3 Spoke• Stainless steel cap
ORDER NO. Mfr. No.422-30325 230325
856-50002
422-30106
Fits Steering Wheel part # 422-30115 and most steering wheels with a rim diameter from 5/8" to 1".
DimensionsA : 11" (280mm)B : 3.2" (80mm)
A B
SOFT TOUCH GRIP STEERING WHEEL
• Thermoplastic antishock material• Standard 3/4" taper• Complete with hub• Meet with the EN 28848 and ABYC P22 standards
YACHT WHEELS
STEERING WHEEL MANOEUVRING KNOB
STEERING WHEEL WITH INTEGRAL KNOB
A : Diameter 15-1/2''B : 3/4''C : 3-1/2''D : 25°
ORDER NO. Mfr. No.856-50002 50002856-50003* 50003*With control knob
Investment Cast 316 Stainless
ORDER NO. Mfr. No.422-30106 230106-1422-30107* 230107-1*With black nylon insert
ORDER NO. Mfr. No. Colour762-20045 V45 Black
For more information see: www.ongaromarine.com
For more information see: www.uflexusa.com
For more information see: www.sea-dog.com
CENTURY GLOVE BOX
Not exactly as pictured
5
STEERING WHEELS/GLOVE BOX
6
MECHANICAL STEERING CABLES
How to measure a Telefex Rotary CableMeasure “Y”, add 18" round up to the next full foot.Example: Y = 72"+ 18" = 90" (7' 6") Round up and order 8 ft. cable
PART NO. SSC62xx - “xx” designates length
Mfr. No. SSC 62 xx : xx = Length in feet
* QC II Cables can also be used as a replacement
SSC62 Fits all these Teleflex Helms
SSC72 Fits all these Teleflex Helms
For more information see:www.teleflexmarine.com
SSC 61-FT SAFE-T (QC II)QUICK-CONN. II CABLESFits Teleflex Helms:SAFE-T (QC) RotaryNFB RotarySAFE-T “TS” (Threaded Spigot) RotaryBIG-T Rotary
This new cable is designed to fit any Teleflex rotary helm. New or old.Threaded or quick connect. Because QC II comes with a specially designedconverter, you can complete most steering service jobs with just a snap.
PART NO. SSC61xx - “xx” designates length
SAFE-T QC(QUICK-CONNECT)
NFB(NO-FEED BACK)
SAFE-T “TS”(THREADED SPIGOT)
BIG-T
TELEFLEX TRADITIONAL ROTARY CABLES
SAFE-T QC(QUICK-CONNECT)
NFB(Safe-T II & 4.2 System)
SAFE-T “TS”(THREADED SPIGOT)
BIG-T
SSC61XX (Includes 069-27620 shown at left)
QC II Fits all these Teleflex Helms
SSC 72-FT SAFE-T “TS” CABLESFits Teleflex Helms:SAFE-T “TS” RotaryBIG-T Rotary
NOTE: These cables are replaced by QC II Cables**QC II Cables with CONVERTER can be used to replace SSC72 Cables.See below
SSC 62-FT SAFE-T (QC) QUICK-CONN. CABLESFits Teleflex Helms:SAFE-T (QC) RotaryNFB Rotary
SSC72XX
ORDER NO. Length/Ft.078-61070 7'078-61080 8'078-61090 9'078-61100 10'078-61110 11'078-61120 12'078-61130 13'078-61140 14'078-61150 15'078-61160 16'078-61170 17'078-61180 18'078-61190 19'078-61200 20'
ORDER NO. Length/Ft.078-62140 14'078-62150 15'078-62160 16'078-62170 17'078-62180 18'078-62190 19'078-62200 20'
ORDER NO. Length/Ft.078-61220 22'078-61230 23'078-61240 24'078-61250 25'078-61260 26'078-61280 28'078-61290 29'078-61300 30'078-61320 32'078-61340 34'078-61360 36'078-61380 38'078-61400 40'078-61420 42'
ORDER NO. Length/Ft.078-62080 8'078-62090 9'078-62100 10'078-62110 11'078-62120 12'078-62130 13'
069-27620
SSC 135-FTBack Mount Rack Twin CableNFB ProRack Twin Cable
COMMAND 200 STEERING CABLEOld Part No. 300-619 xx ft.New Part No. 078-130 xx ft.Replaces Original Part No.Morse Comm. 200/OEM 300001Morse Comm. 200 300002Morse Comm. 200/OEM 300619Morse Comm. 200 300620
How to measure a Telefex Rack & Pinion CableMeasure “Y”, add 30" Round up to the next full foot.Example: Y = 65" + 30" = 95" (7' 11" Round up and order 8 ft. cable)
B = INCHES
COMMAND 200 RACK AND CABLE
COMMAND 290 STEERING CABLES“B” Dimension + 23” = Order Length (Round up to nearest whole foot)
ORDER NO. Description Morse No.308-55900 90° Black Bezel - Replaces #292521 (#308559)308-56100 20° Black Bezel - Replaces #293090 (#308561)
ORDER NO. Length
078-13408 8 ft.078-13409 9 ft.078-13410 10 ft.078-13411 11 ft.078-13412 12 ft.078-13413 13 ft.078-13414 14 ft.
ORDER NO. Length
078-13415 15 ft.078-13416 16 ft.078-13417 17 ft.078-13418 18 ft.078-13419 19 ft.078-13420 20 ft.
ORDER NO. Length
078-13512 12 ft.078-13513 13 ft.078-13514 14 ft.078-13515 15 ft.078-13516 16 ft.
ORDER NO. Length
078-12408 8 ft.078-12409 9 ft.078-12410 10 ft.078-12411 11 ft.078-12412 12 ft.078-12413 13 ft.
ORDER NO. Length
078-12414 14 ft.078-12415 15 ft.078-12416 16 ft.078-12417 17 ft.078-12418 18 ft.078-12420 20 ft.
Remove rack & cable assembly from boat to insure accuracy in measuring cable length.B" Dimension + 30"= Order Length (Round up to nearest whole foot)
ORDER NO. Length
078-29008 8 ft.078-29009 9 ft.078-29010 10 ft.078-29011 11 ft.078-29012 12 ft.078-29013 13 ft.078-29014 14 ft.
ORDER NO. Length
078-29015 15 ft.078-29016 16 ft.078-29017 17 ft.078-29018 18 ft.078-29019 19 ft.078-29020 20 ft.
“BACK MOUNT RACK”(1996 - DATE)1-5/8" Rack width
ORDER NO. Length
078-13008 8 ft.078-13009 9 ft.078-13010 10 ft.078-13011 11 ft.078-13012 12 ft.078-13013 13 ft.
ORDER NO. Length
078-13014 14 ft.078-13015 15 ft.078-13016 16 ft.078-13017 17 ft.078-13018 18 ft.078-13019 19 ft
ORDER NO. Length
078-13020 20 ft.078-13022 22 ft.078-13024 24 ft.
Teleflex Traditional Rack & Pinion Cables
Y = INCHES
Replacement Steering Cables for Morse® Command 200 Rack & Pinion
SSC134xx Single Cable • SSC135 Dual Cable(Dual cable versions have 2 cables together in one rack housing)
Rotary Replacement Steering Cables for Morse® 304415 & Teleflex SSC52XXfor Command 290 Steering Helm
Command 290 Rotary Steering - Individual Parts
COMMAND 290 ROTARYSTEERING KIT
B = INCHES
COMMAND 200 STANDARD HELM
SSC 134-FTBack Mount RackSingle CableNFB Rack Single Cable
SSC124XX CABLE
“THE RACK”(1984 - 1996)1-1/4" Rack width
“The Rack” Rack & Pinion Steering Cables For Teleflex Single & Dual Rack Helm Mfr. No. SSC124XX : xx = Length in feet
7
MECHANICAL STEERING CABLES
Add the lengths of A + B + C together and subtract 4" (10 cm) for each 90˚ bend.Add 12" (30.5 cm) for the engine tilt tube. To order in foot length, round up to the nearest whole foot.
TILT TUBE MOUNTING - Fig. 1Example:A (2.5') + B (10.5') + C (3’) = 16'16' - 8" (two 90˚ bends) = 15'4"15'4" + 12" (tilt tube) = 16'4"Round up to 17"
TRANSOM SUPPORT ORSPLASHWELL MOUNTING - Fig. 2-3Example:A (2.5') + B (10.5') + C (3’) = 16'16' - 8" (two 90˚ bends) = 15'4"Round up to 16"
Fig. 1 Fig. 2
HOW TO MEASUREFOR REPLACEMENTSTEERING CABLES
For more information see: www.teleflexmarine.com
STEERING CABLE MEASURING GUIDE
8
Replacement of Existing Cable:If possible, find the part number stamped on the plastic jacketof the old cable. If you removed the old cable, measure for thereplacement cable as follows:
For Rotary Steering Cable Replacement,Measure Existing Cable as follows: Measure plastic cable jacket(“Y” dimension, shown in above drawing) in inches, add 18",and round up to the next foot.Order that length cable.
For Rack Steering Cable Replacement,Measure Existing Cable as follows: Measure plastic cable jacket(“Y” dimension shown in above drawing) in inches, add 30",and round up to the next foot.Order that length cable.
For JBS Jet Boat Cable Replacement,Measure Existing Cable as follows:Measure cable from tip to tip.(Round up to next foot if needed forwhole foot.)Order that length cable
JBS helms are ONLY for smaller jetssuch as Mercury Sport Jet®, OMCTurbo Jet®, etc. and look like thehelm depicted at right. If your jet steering is different, contactTeleflex.
If your engine does not have a tilt tube cable connection, see“Connection Kits” pages later in this section to get the informationor visit us on-line at www.teleflexmarine.com
ORDER LENGTH:"D" dimension + 22" and round up to the next whole footExample: D=120" + 22" = 142" (11'8"). Round up to 12 ft.
NEW INSTALLATION:Measure cable routing path from wheel center line to engine connection, as follows:A = Center line of wheel to gunwale (or deck, if routed downward),B = Dash to transom,C = Gunwale to centerline of cable connection at centered tiller.
For Cable Installations through the Engine Tilt Tube:Add A, B & C + 6", and round up to the next foot.Order that length cable.For Cables Mounted to Transom, Splashwell or Stringer:Add A, B & C, then subtract 6" and round up to the next foot.Order that length cable.
Cable ThroughEngine Tilt Tube
Transom Cable Mount(similar to stringer type)
SplashwellCable Mount
"Y" IN INCHES
A single-cable, starboard drive push-pull mechanical cable system is shownin this diagram. If your mechanicalsystem is different than the onedepicted and/or you have anyquestions about mechanical steeringafter reviewing this guide, pleasecontact Teleflex Technical Service.
Cable routings (such as those foundon pontoon boats) may vary from thisdrawing.Confirm length by laying a gardenhose (or similar object) along cablepath and measure run from wheel toengine connection point.
TYPICAL SINGLE STATION ROUTING
D = Conduit length
HOW TO MEASURE STEERING CABLES“MEASURE TWICE. ORDER ONCE.”
For more information see:www.uflexusa.com
HOW TO MEASUREFOR NEW STEERINGCABLE INSTALLATION
Fig. 3
For more information see: www.teleflexmarine.com
Sport Tilt Sport Tilt Plus
SAFE-T® QC MECHANICAL ROTARY STEERING SYSTEM:Traditional Teleflex Marine mechanical steering is still the choice for sterndrives, inboards and other power assisted applications.It’s just right for power steered boats in which No FeedBack™ systems are not required. Safe-T® QC offers the quick response of three-turnsteering, and easy installation with a patented, no-tools-required cable connection at the helm.
COMPONENTS:(1) Safe-T QC Single Helm # 073-50940(1) Safe-T QC Bezel (90°) # 070-27484(1) QC Cable # 078-62XX0 XX = Length of Cable
DESCRIPTION Mfr. No. ORDER NO.
Safe-T QC Sgl. Tilt Dash ModuleEach Kit Includes Tilt Helm & Tilt Mechanism
SHT91523 153-91523
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Safe-T QC Single Tilt Helm SH91523P* 073-91523*
Bezel (20°) SB27483P 070-27483
Cable Gard (fits most tilt tubes) SA39329P 069-39329
DESCRIPTION Mfr. No. ORDER NO.
QC II Cable (for most Teleflex rotary helms)(includes #069-27620 Helm Converter) SSC61XX 078-61XX0
QC II Threaded Helm Converter(in SSC61 cable) SA27620P 069-27620
Steering Wheel Hardware Kit SA27454 069-27454
Spent Travel Tube SA35680P 069-35680
Hitch Pin for Quick Connect Helms SA27245P 069-27245
Safe-T “TS” Helm (old style) SH5023P 073-50230
Safe-T QC Dual Helm SH5294P † 073-52940 †
Safe-T QC Dual Tilt Helm SH91524P *† 073-91524*†
* Requires tilt mechanism to complete Tilt Steering system installation.† For dual cable. If steering is NOT power-assisted, upgrading toNFB 4.2 Dual Cable is recommended.
SERVICE ITEMS
SS137 SAFE-T® QC STEERING KIT (Single Cable)
DISCLAIMER:This system is only recommended as replacement for the originalsystem as installed by the boat manufacturer. Teleflex alwaysrecommends NFB helms for outboard applications. NFB helms lockout steering loads caused by propeller torque eliminating the driverfatigue normally experienced with a standard helm. Patented Teleflexsteering helms are a drop in replacement for Safe-T systems.
OPTIONSORDER NO. Steering Kit w / 90° Bezel082-13708 8' Q/Conn Steering Kit082-13709 9' Q/Conn Steering Kit082-13710 10' Q/Conn Steering Kit082-13711 11' Q/Conn Steering Kit082-13712 12' Q/Conn Steering Kit082-13713 13' Q/Conn Steering Kit082-13714 14' Q/Conn Steering Kit082-13715 15' Q/Conn Steering Kit082-13716 16' Q/Conn Steering Kit082-13717 17' Q/Conn Steering Kit082-13718 18' Q/Conn Steering Kit082-13719 19' Q/Conn Steering Kit082-13720 20' Q/Conn Steering Kit
APPLICATIONS:Virtually all power-assisted sterndrive boats with wheels up to16" diameter. Safe-T QC® replaces all Teleflex Safe-T helms madesince 1968 with little or no dash modifications.(Requires use of SSC62 QC or SSC61 QC II steering cable.)
For single station use only. Safe-T QC accepts wheelsup to 16" diameter.
Components are available for dual cable systems, but we recommendNo-FeedBack steering for all dual cable steered, non-power-assistedoutboards and sterndrives. See the NFB 4.2 Dual Cable and SeaStarPRO sections of this catalog.
FEATURES:• Quick-response of 3 turns lock-to-lock.• Kits include: cable, helm, 90° bezel and hardware.• Standard 3/4" round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation: uses simple snap-in cable connection,Teleflex Quick Connect (QC) cable, and industry-standardSafe-T mounting hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
9
ROTARY STEERING SYSTEMS
10
NFB SAFE-T II
APPLICATIONS:NFB Safe-T II single-cable systems are suitable formost single-station boats with a single non-power-assisted outboard engine up to V-4 and minimal engineflutter or steering instability. Safe-T II accepts wheelsup to 16" diameter. (NFB Safe-T II is available in singlecable configuration only). Replaces nearly all standardSafe-T® steering without dash modifications.
FEATURES:• Patented No FeedBack™ Steering mechanism.• Quick response of 3.0 turns from lock-to-lock.• Minimal clutch free play.• Standard 3/4" tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation: uses Teleflex Quick Connect(QC) cable & standard Safe-T mounting hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
NFB™ SAFE-T® II MECHANICAL ROTARY STEERING SYSTEM:Major OEMs use Teleflex Safe-T II, and so will your customers. It’s the next generation of Safe-T,the world’s #1 rotary steering system — rugged, compact, lightweight, and with Teleflex No FeedBacktechnology. This ultra-smooth 3-turn system takes the work out of steering most V-4 outboardpowered boats. The Safe-T II helm is a drop-in replacement for current generation Safe-T QC with no dash modifications!
COMPLETE SYSTEM - Kit includes Helm, 90° Bezel & Cable
Sport Tilt Sport Tilt Plus
DESCRIPTION Mfr. No. ORDER NO.
NFB Safe-T II Tilt Dash ModuleEach Kit Includes Tilt Helm & Tilt Mechanism
SHT91190 153-91190
NFB Safe-T II Tilt Helm SH91190P* 073-91190*
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Bezel (20°) SB27483P 070-27483
Cable Gard (fits most tilt tubes) SA39329P 069-39329
SERVICE ITEMS
DESCRIPTION Mfr. No. ORDER NO.
QC II Cable (for most Teleflex rotary)(Includes #069-27620 Helm Converter) SSC61XX 078-61XX0
Steering Wheel Hardware Kit SA27454 069-27454
Spent Travel Tube (Rotary NFB) SA38603P 069-38603
Hitch Pin for Quick Connect Helms SA27245P 069-27245
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
NFB Safe-T II Helm SH5150P 073-51500
QC Cable SSC62xx 078-62xx0
Rotary NFB Bezel (90°) SB27150P 070-27150
* Requires tilt mechanism to complete Tilt Steering system installation.
SSC62XX
SA39329P
SH5150P
SH91190P
SB27150P
SB27483P
Note: xx - Length of cable, See Page 6 in this catalogue for list ofsteering cable sizes available.
OPTIONS
ORDER NO. Mfr. No.SteeringKit
Length084-13210 SS 13210 10'
084-13211 SS 13211 11'
084-13212 SS 13212 12'
084-13213 SS 13213 13'
084-13214 SS 13214 14'
084-13215 SS 13215 15'
084-13216 SS 13216 16'
084-13217 SS 13217 17'
084-13218 SS 13218 18'
084-13219 SS 13219 19'
084-13220 SS 13220 20'
Safe-T II(No Feedback) Quick Connect (QC) Steering SystemApplication Drawings
Includes Helm, Bezel and Cable
ROTARY STEERING & COMPONENTS
For more information see: www.teleflexmarine.com
11
ROTARY STEERING SYSTEMS
DESCRIPTION Mfr. No. ORDER NO.
NFB 4.2 Single Tilt Dash ModuleEach Kit Includes Tilt Helm & Tilt Mechanism
SHT91526 153-91526
NFB 4.2 Single Tilt Helm SH91526P* 073-91526*
NFB 4.2 Dual Tilt Helm SH91527P* 073-91527*
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Bezel (20°) SB27483P 070-27483
Cable Gard (fits most tilt tubes) SA39329P 069-39329
OPTIONS for SS147 & SS148
NFB™ 4.2 MECHANICAL ROTARY STEERING (SINGLE) SYSTEMPatented No FeedBack Steering Control for about the cost of an old-fashioned steering replacement. With the advantage of 4.2 turns lock-to-lock and ourpatented No FeedBack steering to lock out steering loads, Teleflex’s 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steeredboats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required.
FEATURES:• Patented No FeedBack™ Steeringmechanism.• Comfortable 4.2 turns from lock-to-lock.• Minimal clutch free play.• Standard 3/4" round taperedsteering shaft.• Stainless steel cable output ends.• Fast, easy installation: usesTeleflex Quick Connect (QC)steering cable.• Kits include: cable, helm, 90° bezel and hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certificationrequirements.
*Requires tilt mechanism to complete Tilt Steering system installation.
NFB™ 4.2 MECHANICAL ROTARY STEERING (DUAL) SYSTEM:Patented No FeedBack Steering Control for about the cost of an old-fashioned steering replacement. With the advantage of 4.2 turns lock-to-lock and ourpatented No FeedBack steering to lock out steering loads, Teleflex’s 4.2 Rotary NFB Steering is the ideal system for most non-power-steered boats. This rugged dual cable system is made for applications with engine flutter or steering instability. The helm is a drop-in replacement for current generationSafe-T with no dash modifications required.
APPLICATIONS:NFB 4.2 dual-cable systems are suitable for mostsingle-station boats with a single non-power-assistedoutboard engine up to V-6 in which engine flutter orsteering instability is present. 4.2 accepts wheels up to16" diameter.
Replaces nearly all Teleflex Safe-T® steering systems(including twin cable) without dash modification.
FEATURES:SAME FEATURES AS SS147 STEERING KITS• With Added feature of Twin cable system for maximum control.
SS147 NFB 4.2 Steering Kits (Single Cable)Components:(1) NFB 4.2 Helm # 073-49100(1) Rotary NFB Bezel (90°) # 070-27150(1) QC Cable # 078-62XX0
XX = Length of Cable
SS148 NFB 4.2 Dual Steering Kit (Dual Cable)Components: (1) NFB 4.2 Dual Helm # 073-49200(1) Rotary NFB Bezel (90°) # 070-27150(2) QC Cable # 078-62XX0
XX = Length of Cable
SERVICE ITEMS
DESCRIPTION Mfr. No. ORDER NO.
QC II Cable (for most Teleflex rotary)(Includes #069-27620 Helm Converter) SSC61XX 078-61XX0
Steering Wheel Hardware Kit SA27454 069-27454
Spent Travel Tube (Rotary NFB) SA38603P 069-38603
Sport Tilt SH91800 Sport Tilt Plus SH91900
APPLICATIONS:NFB 4.2 single-cable systems are suitable for most single-station boats with a single non-power-assisted outboardengine up to V-6 and minimal engine flutter or steeringinstability. 4.2 accepts wheels up to 16" diameter.
Use dual cable system for boats with engine flutter orsteering instability.
Replaces nearly all Teleflex Safe-T® steering systemswithout dash modification.
ORDER NO. Mfr. No. Description084-14710 SS14710 Steering Kit 10'084-14711 SS14711 Steering Kit 11'084-14712 SS14712 Steering Kit 12'084-14713 SS14713 Steering Kit 13'084-14714 SS14714 Steering Kit 14'084-14715 SS14715 Steering Kit 15'084-14716 SS14716 Steering Kit 16'084-14717 SS14717 Steering Kit 17'084-14718 SS14718 Steering Kit 18'084-14719 SS14719 Steering Kit 19'084-14720 SS14720 Steering Kit 20'
ORDER NO. Mfr. No. Description084-14812 SS14812 Steering Kit 12'084-14813 SS14813 Steering Kit 13'084-14814 SS14814 Steering Kit 14'084-14815 SS14815 Steering Kit 15'084-14816 SS14816 Steering Kit 16'
For more information see: www.teleflexmarine.com
TILT STEERINGThe ultimate in Tilt Steering Technology. Teleflex Tilt Steeringdelivers unsurpassed performance and flexibility making it theperfect system for all possible applications and boat types.
FEATURES:• Preloaded dual taper bearingsensure minimal excess free play
• Smooth operation and feel• Shaft seals prevent water ingress• 48 degrees of tilt articulation• 5 positive lock positions• Up to three style options• Compact footprint• Maintenance free• Fits most styled and formed dashes
MECHANICAL TILT STEERING
DESCRIPTION Mfr. No. ORDER NO.
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800*
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900*
* Mechanical Tilt mechanism only - select Helm type from list below
DESCRIPTION(Note: All Tilt Helms require Tilt Mechanism)
Mfr. No. ORDER NO.
Safe T QC Tilt Helm SH91523P 073-91523
Safe T QC - Dual Cable Tilt Helm SH91524P 073-91524
Safe T ll (NFB) Tilt Helm SH91190P 073-91190
4.2 (NFB) Tilt Helm SH91526P 073-91526
4.2 (NFB) - Dual Cable Tilt Helm SH91527P 073-91527
Rack Tilt Helm SH91610P 073-91610
Rack (NFB) Tilt Helm SH91630P 073-91630
Pro Rack (NFB) Tilt Helm(Dual Cables) SH91630P 073-91630
HPS Tilt Helm SH91650P 073-91650
Jet Boat Tilt Helm (135° tilt) SH91691P 073-91691
Jet Boat Tilt Helm (270° tilt) SH91692P 073-91692
DASH TILT MODULE KITSDash Module Kits include Tilt Helm, Tilt Mechanism(Sport), mounting hardware & instructions.
DESCRIPTION Mfr. No. ORDER NO.
Safe-T QC Single SHT91523P 153-91523
NFB Safe-T II SHT91190P 153-91190
NFB 4.2 Single SHT91526P 153-91526
BM Rack SHT91610P 153-91610
NFB Rack SHT91630P 153-91630
Sport Tilt Sport Tilt Plus
42˚
-6˚
NFB™ 4.2 TILT MECHANICAL ROTARY STEERING SYSTEMPatented No FeedBack Steering Control - PLUS THE WORLD’S MOST POPULAR TILT STEERING!You get Tilt Steering, the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock outsteering loads! Teleflex’s 4.2 Rotary NFB Tilt Kit puts all the latest mechanical steering technology in one box!
FEATURES:• Teleflex Tilt Steering with 48˚ of total adjustment in five 12˚ increments.• Patented No FeedBack™ Steering mechanism.• Twin cable system for maximum control• Comfortable 4.2 turns from lock-to-lock.• Minimal clutch free play.• Standard 3/4" round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation: uses Teleflex Quick Connect (QC) steering cable.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
APPLICATIONS:NFB 4.2 Tilt single-cable systems are suitable for most single-station boats with asingle non-power-assisted outboard engine up to V-6 and minimal engine flutter orsteering instability. 4.2 accepts wheels up to 16" diameter.
Drop-in replacement for all current generation Teleflex Tilt Steering withno dash modification - and replaces other steering systems with minimal dash modifications.
ORDER NO. Mfr. No. Description084-15711 SS15711 Steering Kit 11'084-15712 SS15712 Steering Kit 12'084-15713 SS15713 Steering Kit 13'084-15714 SS15714 Steering Kit 14'084-15715 SS15715 Steering Kit 15'084-15716 SS15716 Steering Kit 16'084-15717 SS15717 Steering Kit 17'084-15718 SS15718 Steering Kit 18'084-15719 SS15719 Steering Kit 19'084-15720 SS15720 Steering Kit 20'
ROTARY TILT STEERING
For more information see: www.teleflexmarine.com12
Minimal Core to LinerContact Area
Splined Liner
Rotary Core
XTREME™ NFB MECHANICAL STEERING SYSTEMSFOR LOWER HP OUTBOARD ENGINESDelivering unsurpassed comfort and safety from a mechanical steering system theNFB 4.2 suits outboard power boats up to V6. For lower HP outboard engines.
XTREME™ Steering System brings a new level of smooth, effortless handling and precision controlto an important class of boats. This advanced mechanical steering system will enhance the drivingexperience and operational control of a wide range of outboard powered boats including aluminumfishing boats, pontoons, flats, skiffs and more.
FEATURES:• Smoothest and lowest steering effort mechanical helm offered in the market place yet still offerseasy installation.
• Complete steering system including new helm, high efficiency XTREME™ steeringcable design and new style bezel.
• Quick connect feature on both steering cable and spent travel tube for easy quick installation.• Installs in same mounting pattern and bracket location as currentTeleflex Marine Steering Systems.
• Smallest footprint possible to accommodate small/tight dash helm stations.
SSCX XTREME™ CABLE
FEATURES:• Based on the current industry leading XTREME™ technology• Splined ridges on the inner liner allow close contact with core• With minimum contact the core glides freely• Tight fit for minimal lost motion• Reduced friction for extended cycle life• Robust construction support highest steering loads in the mechanical range
A brand new XTREME™ steering cable was designed specifically for this system.This cable offers lower backlash and is more efficient than a standard steering cable.It provides the lowest ease of effort, a close “fit” of the core to liner for lowest lost motion.The concept provides the “tight” fit of core to liner yet allows area for lubrication.The design of the helm allows higher loads to be placed into the cable requiring this newdesign cable. There is a quick connect feature on both the steering cable and spent traveltube for easy, quick installation.
ORDER NO. Mfr. No. Descriptiion
084-17612 SSX17612 XTREME NFB Steering Kit, 12 ft.
084-17613 SSX17613 XTREME NFB Steering Kit, 13 ft.
084-17614 SSX17614 XTREME NFB Steering Kit, 14 ft.
084-17615 SSX17615 XTREME NFB Steering Kit, 15 ft.
084-17616 SSX17616 XTREME NFB Steering Kit, 16 ft.
084-17617 SSX17617 XTREME NFB Steering Kit, 17 ft.
084-17618 SSX17618 XTREME NFB Steering Kit, 18 ft.
084-17619 SSX17619 XTREME NFB Steering Kit, 19 ft.
084-17620 SSX17620 XTREME NFB Steering Kit, 20 ft.
084-17622 SSX17622 XTREME NFB Steering Kit, 22 ft.
084-17624 SSX17624 XTREME NFB Steering Kit, 24 ft.
XTREME™ NFB STEERING KITORDER NO. Mfr. No. DESCRIPTION
084-17712 SSX17712 XTREME Tilt NFB Steering Kit, 12 ft.
084-17713 SSX17713 XTREME Tilt NFB Steering Kit, 13 ft.
084-17714 SSX17714 XTREME Tilt NFB Steering Kit, 14 ft.
084-17715 SSX17715 XTREME Tilt NFB Steering Kit, 15 ft.
084-17716 SSX17716 XTREME Tilt NFB Steering Kit, 16 ft.
084-17717 SSX17717 XTREME Tilt NFB Steering Kit, 17 ft.
084-17718 SSX17718 XTREME Tilt NFB Steering Kit, 18 ft.
084-17719 SSX17719 XTREME Tilt NFB Steering Kit, 19 ft.
084-17720 SSX17720 XTREME Tilt NFB Steering Kit, 20 ft.
084-17722 SSX17722 XTREME Tilt NFB Steering Kit, 22 ft.
084-17724 SSX17724 XTREME Tilt NFB Steering Kit, 24 ft.
XTREME™ TILT NFB STEERING KIT
ROTARY STEERING SYSTEMS
For more information see: www.teleflexmarine.com13
For more information see: www.teleflexmarine.com14
OPTIONS
HPS® MECHANICAL ROTARY STEERING SYSTEM:HPS™ Rotary High Performance Steering by Teleflex is the best 3-turn way to steer a power-assisted sterndrive!Designed exclusively for power-steered boats, HPS reduces backlash (free-play at the wheel) associated with power steered boats by up to 50%!
COMPLETE SYSTEMThis steering system is sold by components. Select helm, bezel and cableor Tilt helm, Tilt Mechanism and cable from items listed below.
HPS Rotary Tilt Helm SH91650P* 073-91650*
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Bezel (20°) SB27483P 070-27483
Cable Gard (fits most tilt tubes) SA39329P 069-39329
Steering Wheel Hardware Kit SA27454 069-27454
Spent Travel Tube SA38603P 069-38603
Hitch Pin for Quick Connect Helms SA27245P 069-27245
* Requires tilt mechanism to complete Tilt Steering system installation.
SERVICE ITEMS
DESCRIPTION Mfr. No. ORDER NO.
HPS Rotary Helm SH5180P 073-51800
HPS Rotary Cables(QC interface)
HPS Rotary Cable 10’ SSC6310 078-63100
HPS Rotary Cable 11’ SSC6311 078-63110
HPS Rotary Cable 12’ SSC6312 078-63120
HPS Rotary Cable 13’ SSC6313 078-63130
HPS Rotary Cable 14’ SSC6314 078-63140
HPS Rotary Cable 15’ SSC6315 078-63150
HPS Rotary Cable 16’ SSC6316 078-63160
HPS Rotary Cable 17’ SSC6317 078-63170
HPS Rotary Cable 18’ SSC6318 078-63180
HPS Rotary Cable 19’ SSC6319 078-63190
HPS Rotary Cable 20’ SSC6320 078-63200
Bezel (90°) SB27484P 070-27484
APPLICATIONS:HPS™ Rotary is ideal for all power-assisted sterndrives that can accept amechanical steering cable.
It replaces standard current generation Safe-T® steering without dashmodifications and most other rotary steering systems with minimal dashmodifications.
HPS Rotary is available in single cable configuration and is for singlestation use only. It accepts wheels up to 16" diameter.
FEATURES:• Designed exclusively for boats with power-assisted steering.• Unique 3-turn helm with planetary gears and coated helical steeringcable combine to deliver a compact helm with incredible response andminimal lost motion!• HPS Rotary helms fit industry-standard Teleflex dash cutouts:either Safe-T/Rotary NFB™ or Tilt.• Compact helm takes up little room behind the dash.• Designed to handle normal steering loads.• Standard 3/4" round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation: uses Teleflex QuickConnect™ (QC) cable & standard Safe-T mounting hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
070-2748490˚ Bezel-HPS
073-51800HPS-Gold finish
Sport Tilt SH91800 Sport Tilt Plus SH91900
HPS Rotary Cables (QC interface)
Up to 50%Less free-play atwheel vsconventionalsteering
ROTARY STEERING SYSTEMS
Sport Tilt Sport Tilt Plus
THE RACK MECHANICAL RACK STEERING SYSTEM:Traditional Teleflex mechanical steering is still the choice for sterndrives, inboards and other power assisted applications. It’s just right forpower steered boats in which No FeedBack™ systems are not required. Our new Rack features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice forpower-steered boats. APPLICATIONS:
Virtually all power-assisted sterndrive boats with wheels up to 16"diameter.
Back Mount Rack Replaces 1984-date Teleflex “The Rack”steering without dash modification.(Requires use of SSC134XX Back Mount Rack cable.)
For single station use only. Components are available for dualcable systems, but we recommend No-FeedBack steering for alldual cable steered, non-power-assisted outboards and sterndrives
See the NFB Rack Dual Cable (Page 16)and SeaStar PRO (Page 38) in this catalogue.
FEATURES:• Precise, easy 4 turns lock-to-lock.• Kits include: cable, helm, 90° bezel and hardware.• Standard 3/4” round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation: back mount design allows quickplacement in dash PLUS mounting hardware fits industry-standard Teleflex rack holes.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
COMPONENTS:(1) Back Mount Rack Helm (single/dual) # 073-52100(1) Back Mount Bezel (90°) # 070-39526(1) Back Mount Rack Single Cable # 078-134XX
XX = Length of Cable
DESCRIPTION Mfr. No. ORDER NO.
BM Rack Tilt Dash ModuleEach Kit Includes Tilt Helm & Tilt Mechanism
SHT91610 153-91610
BM Rack Tilt Helm (single/dual) SH91610P* 073-91610*
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Dash Wedge Kit (10°) SB27448P 070-27448
Dash Wedge Kit (20°) SB27449P 070-27449
Back Mount Rack Friction Device SA39531P 069-39531
Cable Gard (fits most tilt tubes) SA39329P 069-39329
DESCRIPTION Mfr. No. ORDER NO.
BM Rack Dual Cables
Back Mount Rack Dual Cable 12' SSC13512 † 078-13512 †
Back Mount Rack Dual Cable 13' SSC13513 † 078-13513 †
Back Mount Rack Dual Cable 14' SSC13514 † 078-13514 †
Back Mount Rack Dual Cable 15' SSC13515 † 078-13515 †
Back Mount Rack Dual Cable 16' SSC13516 † 078-13516 †
Steering Wheel Hardware Kit SA27454 069-27454
*Requires tilt mechanism to complete Tilt Steering system installation.† For dual rack & pinion steered boats.If steering is NOT power-assisted, upgrading to NFB 4.2 Pro Rack is recommended.
SERVICE ITEMS
SS141 BM RACK STEERING KIT (Single Cable)
DISCLAIMER:This system is only recommended asreplacement for the original system asinstalled by the boat manufacturer.Teleflex always recommends NFBhelms for outboard applications.NFB helms lock out steering loadscaused by propeller torque eliminatingthe driver fatigue normally experiencedwith a standard helm. Patented Teleflexsteering helms are a drop inreplacement for Safe-T systems.
SSC135XXBM Dual Cable
OPTIONSORDER NO. Steering Kit w / 90° Bezel081-14108 8' Rack Steering Kit081-14109 9' Rack Steering Kit081-14110 10' Rack Steering Kit081-14111 11' Rack Steering Kit081-14112 12' Rack Steering Kit081-14113 13' Rack Steering Kit081-14114 14' Rack Steering Kit081-14115 15' Rack Steering Kit081-14116 16' Rack Steering Kit081-14117 17' Rack Steering Kit081-14118 18' Rack Steering Kit081-14119 19' Rack Steering Kit081-14120 20' Rack Steering Kit
For more information see:www.teleflexmarine.com
15
RACK STEERING SYSTEMS
Sport Tilt Sport Tilt Plus
APPLICATIONS:NFB Pro Rack systems are suitable forsingle-station, high performance boats equipped with a single non-power-assisted outboard (up to V-6) in which engine flutter or steeringinstability is present. NFB Pro Rack accepts wheels up to 16" diameter.
New Back Mount design installs easily and replaces standard Teleflexrack steering without dash modifications.
FEATURES:• Patented No FeedBack™ Steering mechanism.• Dual cables minimize lost motion in system.• Precise feel of 4 turns from lock-to-lock.• Minimal clutch free play.• Standard 3/4" round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation; back mount design allows quick placementin dash PLUS mounting hardware fits industry-standardTeleflex rack holes.• Kits include: cable, helm, 90° bezel and hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
NFB™ MECHANICAL RACK STEERING (DUAL) SYSTEM:The only Rack and Pinion steering system for the high performance boater. Teleflex combines its patentedNo FeedBack technology with the incredible precision and control of a dual cable rack and pinion system.Now more than ever, NFB means performance! Teleflex offers Pro Rack for high performance hulls andmotors — boats which have engine flutter, experience instability or simply need that extra margin ofcontrol at the helm. It's a drop-in replacement for Teleflex “The Rack”.
ORDER NO. Mfr. No. Length081-15110 SS15110 10'081-15111 SS15111 11'081-15112 SS15112 12'081-15113 SS15113 13'081-15114 SS15114 14'081-15115 SS15115 15'081-15116 SS15116 16'081-15117 SS15117 17'081-15118 SS15118 18'081-15119 SS15119 19'081-15120 SS15120 20'
DESCRIPTION Mfr. No. ORDER NO.
NFB Rack Tilt Dash Module (single/dual)Each Kit Includes Tilt Helm & Tilt Mechanism SHT91630 153-91630
NFB Rack Tilt Helm (single/dual) SH91630P* 073-91630*
Sport Tilt MechanismCover Style: Flexible Rubber Bellows SH91800P 073-91800
Sport Plus Tilt MechanismCover Style: Solid Round Cover SH91900P 073-91900
Dash Wedge Kit (10°) SB27448P 070-27448
Dash Wedge Kit (20°) SB27449P 070-27449
Cable Gard (fits most tilt tubes) SA39329P 069-39329
Hitch Pin for Quick Connect Helms SA27245P 069-27245
OPTIONS FOR SS151 & SS152
* Requires tilt mechanism to complete Tilt Steering system installation.
NFB™ MECHANICAL RACK STEERING (SINGLE) SYSTEM:The easy-to-sell, easy-to-install upgrade to the most popular Rack and Pinion steering system in boating. Teleflex has applied its patented No FeedBacktechnology to the incredible precision of a rack and pinion system, and engineered-in serious advances in steering comfort and control. And — it's adrop-in replacement for Teleflex “The Rack”.
SS151 NFB Rack Steering Kits (Single Cable)
SS152 NFB Rack Steering Kits (Dual Cable)
APPLICATIONS:NFB Rack single-cable systems are suitable for mostsingle-station boats with a single non-power-assistedoutboard engine up to V-6 and minimal engine flutter orsteering instability. NFB Rack accepts wheels up to16" diameter.
New Back Mount design means easy installation; helm &cable are installed as a unit from behind dash and replacestandard Teleflex rack steering without dash modifications.
FEATURES:• Patented No FeedBack™ Steering mechanism.• Precise feel of 4 turns from lock-to-lock.• Minimal clutch free play.• Standard 3/4” round tapered steering shaft.• Stainless steel cable output ends.• Fast, easy installation; back mount designallows quick placement in dash PLUS mountinghardware fits industry-standard Teleflex rack holes.• Kits include: cable, helm, 90° bezel and hardware.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
Includes(1) # 073-52300 Helm, (1) # 070-39544 90° Bezel and(1) # 078-134 xx Cable. Steering wheel not included.
Includes (1) # 073-52300 Helm, (1) # 070-39544 90° Bezel and(1) # 078-135 xx Twin Cable. Steering wheel not included.
ORDER NO. Mfr. No. Length081-15212 SS15212 12'081-15213 SS15213 13'081-15214 SS15214 14'081-15215 SS15215 15'081-15216 SS15216 16'
16
RACK STEERING SYSTEMS
For more information see: www.teleflexmarine.com
(Steering Wheelnot included)
JBS - JET BOATSTEERING SYSTEM TYPICAL JBS
MOUNTING/CABLE ROUTING
For more information see: www.trmarine.com www.teleflexmarine.com17
098-09501
098-09725
OPTIONS
JBS JET BOAT MECHANICALSTEERING SYSTEM:Just for Jets! JBS™ by Teleflex means Jet Boat Steering! Designedexclusively for jet boats, JBS features a choice of two steering arcs, aspecial steering cable (not a control cable) plus an assortment of mountingoptions for virtually any boat! Nobody knows steering like Teleflex!
APPLICATIONS:Teleflex JBS is recommended for use in all jet boat applications powered byMercury® Sport Jet or OMC® Turbo Jet drives up to 175 HP.FEATURES:• Ultra-compact helm with stylish 4.4” bezel is easy to install and very rugged.• 135° or 270° turning arc lock-to-lock.• Uses a special steering cable.• 90° dash mount. (Tilt Steering option available!)• 90° or 180° cable entry into helm allows alternate cable routing. (Lookingat dash, options are 9:00, 12:00 or 3:00 routing positions.)• Built-in steering stops prevent additional cable stress in hard overpositions.• Standard 3/4" round tapered steering shaft, 3.5" total allowable cable travel.• Mercury® & OMC® nozzle/gate connection kits.• Stainless steel cable output ends.• Meets A.B.Y.C./N.M.M.A. requirements.
If you are replacing a jet boat steering cable, you must determine the partnumber of the existing steering cable. SSC219 cables are ONLY for JBSsystems shown on this page.Use only genuine Teleflex replacement hardware specifically designed forthis product. Do not substitute other parts.
COMPLETESYSTEMThis steering system is soldby components. Select helm,bezel and cable or Tilt helm,and cable from items listedbelow. Note engine type anddesired steering arc.
JBS Tilt Steering Helm (135° arc) SH91691P 073-91691
JBS Tilt Steering Helm (270° arc) SH91692P 073-91692
Steering Wheel Hardware Kit SA27454 069-27454
SERVICE ITEM
DESCRIPTION Mfr. No. ORDER NO.
JBS Helm (135° turning arc) SH5087 or 073-50870
JBS Helm (270° turning arc) SH5088 073-50880
JBS Steering Cable 12’ SSC21912 078-21912
JBS Steering Cable 13’ SSC21913 078-21913
JBS Steering Cable 14’ SSC21914 078-21914
JBS Steering Cable 15’ SSC21915 078-21915
JBS Steering Cable 16’ SSC21916 078-21916
JBS Steering Cable 17’ SSC21917 078-21917
JBS Steering Cable 18’ SSC21918 078-21918
JBS Steering Cable 20’ SSC21920 078-21920
JBS Bezel & Mounting Hardware Kit SB39452P 070-39452
Nozzle Connection Kit (Mercury) SA27591P or 069-27591
Nozzle Connection Kit (OMC) SA27590P 069-27590
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
Johnson-Evinrude-MercuryUp to 100 HP, 1972 & Newer,3/8" Diameter
SLA-9000 098-09000
Johnson-EvinrudeV-4 & V-6,1/2" Diameter
SLA-9501 098-09501
Mercury Black Max 1980 & Newer,Mariner V-6 1980 & Newer,1/2" Diameter
SLA-9725 098-09725
STAINLESS STEEL. Complete with adjustable ball point andnylon lock nuts to insure vibration proof locking.
PLATED STEEL.JOHNSON-EVINRUDE70 & 140 HP Engines, 1977-1984(Includes BOOT)
Mfr.No. SA27361ORDER NO. 069-27361
098-09000
LINK ARM KITS/STEERING
JBS STEERING/LINK ARMS
073-509401990-1996date casting
073-529401990-1996date casting
JBS HELMSJust for Jets! JBS by Teleflex meansJet Boat Steering. Designed exclusively for jet boats,JBS features a choice of two steering arcs, a realsteering cable (not a control cable) plus anassortment of mounting options for virtually anyboat. Nobody knows steering like Teleflex! For more information see:
www.teleflexmarine.com18
070-2715090˚ Bezel
070-2748320˚ Bezel
NFB™ 4.2• Two bolts secure QC cable to helm.• One bolt holds spent travel tube.• Cast finish helms have No FeedBack™ feature.Kits:084-147XX (4.2 Single Cable),084-148XX (4.2 Dual Cable)084-157XX (4.2 Single Cable Tilt Steering)
SAFE-T® TS (OLD STYLE)• Large thread-on nut secures cable to helm.• Conical plastic nut holds spent travel tube.Kit:None. Safe-T TS is sold as components.
BIG-T®• Large thread-on nut secures cable to helm.• Conical plastic nut holds spent travel tube.• Usually has diecast bezel which can be eitherround one-piece or oval 2-piece design.
• Older systems may have 2 helms (twin station)or 2-3 cables (tension) systems.Kit:None. Big-T is sold as components.
070-27265Bezel, Two-Piece Style, BLACK
This is an overview of Teleflex Marine ROTARY steering helms likely to be encountered.
070-2748490˚ Bezel
070-51500 070-51800
073-50230
073-50000
NFB™ SAFE-T II & HPSROTARY™• Collet & hitch pin secure QC cable to helm.• One bolt holds spent travel tube.• Safe-T II cast finish helm has No FeedBack™feature; HPS gold-finish helm does not.Kit:084-132XX (Safe-T II Single Cable);HPS Rotary is sold as components only.
SAFE-T® QC• Collet & hitch pin secure QC cable to helm.• Conical plastic nut holds spent travel tube.Kit:082-137XX (Safe-T QC Single Cable)
070-2748320˚ Bezel
070-2748490˚ Bezel-HPS
073-51500Safe T II- cast finish
073-51800HPS- gold finish
070-2748320˚ Bezel-Safe T II & HPS
073-50870JBS HELM (135° Turning Arc)
073-50880JBS HELM (270° Turning Arc)
NOTE: Latest bezel styles shown; several other configurations offered since 1968.
HELM VISUAL IDENTIFICATION GUIDE:
070-2715020˚ Bezel-Safe T II
073-49100Single Cable
073-49200Dual Cable
070-2748320˚ Bezel
070-2748490˚ Bezel
ROTARY STEERING HELMS
For more information see: www.teleflexmarine.com19
NFB™ RACK & NFB™ PRO RACK™(“BACK MOUNT” RACK)• Four bolts and nuts secure cable’s rack housing to helm.• Helm has No FeedBack™ feature.• Helm/cable install as unit from back of dash.• Helm requires current generation rack cables (will not bolt up toolder style cables).• Dual cable has one rack housing with two cables attached.Single helm works on both single and dual cable applications.• One bezel is offered; angle to dash is changed by adding wedges.Kits: 081-151XX (NFB Rack Single Cable),
081-152XX (NFB Pro Rack Dual Cable).
073-52300
070-3954490˚ Bezel
070-2744810˚ Wedge Kit
070-2744920˚ Wedge Kit
070-2744920˚ Wedge Kit
HELM VISUAL IDENTIFICATION GUIDE: Continued
STANDARD SYSTEM TYPE SINGLE HELM DUAL HELM BEZELS CABLE TYPE
NFB™ 4.2 See Page 10*Packaged System (Single) w/Helm,90º Bezel & cable#084-147xx (xx = Length in ft.) Single#084-148xx (xx = Length in ft.) Dual
073-49100 073-49200
Standard:90º # 070-27484
Optional:20º # 070-27483
078-62xx0 or 078-61xx0xx = Length in feet
(See Page 8)
NFB™ Safe-T II See Page 8*Packaged System (Single) w/Helm,90º Bezel & cable#084-132xx (xx = Length in ft.)
073-51500 N/A
Standard:90º # 070-27150
Optional:20º # 070-27483
078-62xx0xx = Length in feet
(See Page 8)
HPS Rotary™System sold by components. 073-51800 N/A
Standard:90º # 070-27484
Optional:20º # 070-27483
078-63xx0xx = Length in feet
(See Page 8)
Safe-T® QC See Page 5*Packaged System (Single) w/Helm,90º Bezel & cable#082-137xx (xx = Length in ft.)
073-50940 073-52940
Standard:90º # 070-27484
Optional:20º # 070-27483
078-62xx0 or 078-61xx0xx = Length in feet
(See Page 8)
Safe-T® TS (Old Style) 073-50230 N/A
Standard:90º # 070-27484
Optional:20º # 070-27483
078-61xx0xx = Length in feet
(See Page 8)
Big-T® 073-50000 N/AStandard:
90º /20º - # 070-27265 (Blk)078-61xx0
xx = Length in feet(See Page 8)
The Rack™ (“Back Mount” Rack)See Page 7*Packaged System (Single) w/Helm,90º Bezel & cable#081-141xx (xx = Length in ft.)
073-52100 073-52100
Standard:90º # 070-39526Optional Wedge Kits:20º # 070-2744910º # 070-27448Optional Friction Knob:# 069-39531
078-134xx - Single Cable078-135xx - Dual Cable
xx = Length in feet(See Page 8)
NFB™ Rack (“Back Mount” Rack)See Page 9*Packaged System (Single) w/Helm,90º Bezel & cable#081-151xx (xx = Length in ft.) Single#081-152xx (xx = Length in ft.) Dual
073-52300 073-52300
Standard:90º # 070-39544
Optional Wedge Kits:20º # 070-2744910º # 070-27448
078-134xx - Single Cable078-135xx - Dual Cable
xx = Length in feet(See Page 8)
THE RACK™ (“BACK MOUNT” RACK)• Four bolts and nuts secure cable’s rack housing to helm.• Helm/cable install as unit from back of dash.• Helm requires current generation rack cables(will not bolt up to older style cables).• Dual cable has one rack housing with two cables attached.Single helm works on both single and dual cable applications(NFB recommended for non-power assist)• One bezel is offered; angle to dash is changed by adding wedges.Kits: 081-141XX (Rack Single Cable)
This is an overview of Teleflex Marine RACK & PINION steering helms likely to be encountered.
073-52100
070-3952690˚ Bezel
070-2744810˚ Wedge Kit
RACK STEERING HELMS
Over the past 30 years Teleflex has produced steering helms and steering cables that are no longer available.Please use the following guide to identify the current system and choose the proper replacement system.
ORIGINAL SYSTEMNAME (VERSION)
DATES USED &CABLE COLOUR(S)
REPLACEMENTNon-Power-AssistOutboards & I/O’s
REPLACEMENTPower-Assist & Small Inboards
PACKAGED SYSTEM P/N(XX=LENGTH)
Easy-T (Rotary)SC89XX Cable
1968 - 1972Silver
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX)
HPS Rotary (components) orSafe-T Quick Connect 082-137XX
HPS RotarySC63XX Cable
1999 - DateBlack
(HPS not recommended fornon-power-assist steering)
HPS Rotary (components)
Midi-T (Rotary)**SC75XX Cable
1969 - 1972Green
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX) HPS Rotary (components) or
Safe-T Quick Connect 082-137XX
Mini-TSC74XX Cable
1969 - 1972Black
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX) HPS Rotary (components) or
Safe-T Quick Connect 082-137XX
Morse® Command 2 Rotary300622/300623/300624
ObsoleteRed
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX) HPS Rotary (components) or
Big-T (components)
Morse® Command 290304411-00-XXX.0
To Date Safe-T II (SS132XX)� or HPS Rotary (components) orNFB 4.2 (SS147XX) Safe-T Quck Connect 082-137XX
Teleflex Direct Replacement Cable for these systems is SSC52XX
Morse® Command 250300962/312020
Red or BlackObsolete
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX) HPS Rotary (components) or
Safe-T Quick Connect 082-137XX
Morse® Command 290Dual Cable Systems(2) 304411 Cables
To 2000 NFB 4.2 (SS148XX)� or Safe-T Quick ConnectRed or Black SeaStar (components) dual (components)
(See SeaStar Selection Guide)Teleflex Direct Replacement Cable for these systems is SSC290XX
Safe-T (Version 1)SC89XX Cable
1968 - 1972White or Black
Safe-T II (SS132XX)� orNFB 4.2 (SS147XX) HPS Rotary (components) or
Safe-T Quick Connect 082-137XX
Safe-T "TS"(Version 2)*
SC69XX/SSC72XX
1972 - Date Safe-T II (SS132XX)� or HPS Rotary (components) orWhite or Black NFB 4.2 (SS147XX) Safe-T Quick Connect 082-137XX
Teleflex Direct Replacement Cable for these systems is SSC61XX
Safe-T QC(Quick Connect)
SSC62XX
1990 - 1996 Safe-T II (SS132XX)� or HPS Rotary (components) orBlack NFB 4.2 (SS147XX) Safe-T Quick Connect 082-137XX
Teleflex Direct Replacement Cable for these systems is SSC61XX
Safe-T QC(Quick Connect)
SSC62XX
1996 - Date Safe-T II (SS132XX)� or HPS Rotary (components) orBlack NFB 4.2 (SS147XX) Safe-T Quick Connect 082-137XX
Teleflex Direct Replacement Cable for these systems is SSC61XX
Safe-T DualCable SystemsSSC62XX
1975 - Date NFB 4.2 Dual Cable (SS148XX) or Safe-T Quick ConnectWhite or Black SeaStar (components) dual (components)
Teleflex Direct Replacement Cable for these systems is SSC61XX
NFB 4.2SSC62XX Cable
1990 - Date NFB Rack (SS147XX) NFB not for power steering or inboardBlack
Teleflex Direct Replacement Cable for these systems is SSC130XX
Morse® Command 200 Rack300619XX
To 2001 NFB Rack (SS151XX) HPS Rack (components) orRed or Black The Rack 081-141XX
Teleflex Direct Replacement Cable for these systems is SSC130XX
� Safe-T II is for engines up to and including V-4’s. For manually steered outboards larger than V-4, use NFB 4.2.**Slight dash modification required for installation of recommended new helm. If engine is power-assisted, NFB steering cannot be used.* Since this may be relatively new, replacement of entire system may not be necessary.Determine which part of the system may need to be replaced. If engine is power-assisted, NFB steering cannot be used.
Note: The only difference between 1990-1996 & 1996-date Safe-T QC helms is the shape of the helm housing castings.
(See Page 14)
(See Page 6 & 9)
(See Page 6 & 9)
(See Page 6)
For more information see: www.teleflexmarine.com
MECHANICAL STEERING IDENTIFICATION GUIDE
20
A or B(A shown)
H
G
D
H
TILT TUBE MOUNTING
SPLASHWELL MOUNTING
TRANSOM SUPPORT MOUNTING
INBOARD STRINGER SUPPORT MOUNTING
This is the most popular steering cable-to-engine connectionmethod for outboards with a standard tilt tube. This installationrequires the use of a link arm which can be purchased from theengine manufacturer.
PARTS REQUIRED: We recommend using the enginemanufacturer's link arm.
See Steering Components Page 22 and 23
This Cable connection is used for older model outboards withouttilt tubes, low HP outboards or applications where transom designinterferes with standard tilt mounting.
PARTS REQUIRED: D, G & H
Master Kits: Includes D, G & H
069-27256 Master Kit - Corrosion Resistant069-27255 Master Kit - Stainless Steel
See Steering Components Page 22 and 23
Link Arm(From engine manufacturer)
G
E or F(E shown)
H
This cable connection is used on boats where standard tilt tubeor transom support mounting methods are pre-cluded by asplashwell box. The mounting surface is usually nearperpendicular to the transom and between 12 and 16 inchesfrom the centre line of the boat and/or tiller(25-33" Total Slashwell Width).
PARTS REQUIRED:90° Splashwell Mounting - B, HORDER NO. 069-27254
15° Splashwell Mounting - A, HORDER NO. 069-27253
See Steering Components Page 22 and 23NOTE: Not for thru hull applications.
This cable connection is used on inboards and is attached to astringer or suitable mounting bracket below deck. The cable isperpendicular to the centred tiller and in half stroke for properoperation. An additional bracket may be needed to support the ballpost. Available in heavy duty “Ski Boat” versions with eitherlong (4.5") or short (2.25") post standoff to centre of support tube.PARTS REQUIRED: E, G, H (long post) or
F, G, H (short post)
For Ski Boat Clamp Block Kit, purchase E or F and G & H separately.See Steering Components Page 22 and 23
21
MECHANICAL STEERING CONNECTION - OVERVIEW
For more information see: www.teleflexmarine.com
For more information see: www.teleflexmarine.com22
CLAMP BLOCK - SKI BOAT INBOARD2-1/4" Stand-OffORDER NO. 069-27578
Heavy Duty with Black Metal Flake Finish.
SPLASHWELL MOUNT KIT90˚ Corrosion ResistantORDER NO. 069-27254
BOOT ONLY:ORDER NO. 069-37868
SPLASHWELL THREADED TUBE W/BALLCorrosion ResistantORDER NO. 069-36316
BOOT ONLY:ORDER NO. 069-37868
CLAMP BLOCK - OUTBOARDStainless SteelORDER NO. 069-27149
Corosion ResistantORDER NO. 069-27055
CLAMP BLOCK - SKI BOAT INBOARD4-1/2" Stand-OffORDER NO. 069-27579
SUPPORT TUBEAluminumORDER NO. 069-27274
Stainless SteelORDER NO. 069-27275
ROD END KIT - 1/2-20 THD.
BUSHING KIT - INBOARD TILLER ARM
ORDER NO. 069-27313
With Short BoltORDER NO. 069-27314
With Long BoltORDER NO. 069-27329
NOTE:069-27313 Bushing should beordered with 069-27329.
CLEVIS KIT - SKI BOAT(STAINLESS STEEL)
With Short BoltORDER NO. 069-27576
With Long BoltORDER NO. 069-27577
Steel SA27276PORDER NO. 069-27276
Stainless Steel SA27277PORDER NO. 069-27277
SPLASHWELL MOUNT KIT15˚ Corrosion ResistantORDER NO. 069-27253
NOTE:OUTER RING NOT SOLD SEPARATELY
BOOT ONLY:ORDER NO. 069-37868
HEAVY DUTY WITH BLACK METAL FLAKE FINISH.
NOTE: Parts shown on this page are available in kit form ONLY.
CLEVIS KIT - STAINLESS STEEL
MECHANICAL STEERING CONNECTION KITS
For more information see: www.teleflexmarine.com23
SPENT TRAVEL TUBES FOR ROTARYHELMSSAFE-T QC/ SAFE-T “TS”/ BIG-T HelmsORDER NO. 069-35680
NFB 4.2 / NFB SAFE-T II / HPS Rotary HelmsORDER NO. 069-38603
UNIVERSAL TIE BAR KIT
STEERING WHEEL HARDWARE KITFor All Teleflex Mechanical Helmswith standard marine round3/4” Tapered Shaft.ORDER NO. 069-27454
QC II HELM CONVERTER
HITCH PIN & TAG FOR QUICK CONNECT HELMAND QC II HELM CONVERTERReplacement hitch pin for all Teleflex helmswith the Quick Connect cable attachmentport and for all# 069-27620 QC II Helm Converters.ORDER NO. 069-27245
SUPPORT TUBEAluminum.Grooved Old Morse® StyleORDER NO. 300-64480
HOOKUP, INBOARD TRANSOM MOUNTFor Volvo, 1977 and earlier.ORDER NO. 300-61400
For Helms with Threaded Spigots.ORDER NO. 069-27620
Upgrades older Teleflex rotary helms toQuick-Connect cable interface, allowing useof SSC61/SSC62 QC cables.
Maximum length: 25-1/2"ORDER NO. 069-27252
ADAPTER BRACKETFor Johnson/Evinrude 40 HP andunder (not pictured)ORDER NO. 300-61200
See also Teleflex outboard clampblock kits on preceding pages.
CABLE GARDFor Most Outboards with Tilt Tube.Helps to keep the tilt tube clean.ORDER NO. 069-39329
NOTE: Parts shown on this page are available in kit form ONLY.
300-61700 Shown
HOOKUP, INBOARD STAND-OFFTall BracketORDER NO.300-61600
Short Bracket 2"ORDER NO.300-61700
Short Bracket 2" (Stainless Steel)ORDER NO.307-04600
See also Teleflex ski boat inboard clamp block kits onpreceding pages.
MECHANICAL STEERING CONNECTION KITS
Mariner 9.9-15 HP 1982 and newer.Suzuki 9.9-15 HP, 16-25 HP 1982 and newer.
Johnson/Evinrude 9.9-15-25-30-40 HP 1977 & newer.Yamaha 9.9-15 HP 1984 and newerORDER NO. 098-03475
This kit fits under engineclamps and is designed toprevent motor from jumpingoff transom. Also preventsdamage to the transom by theclamps. All parts furnished forsimple hook up. Constructedof aluminum and plated steel.
For use with PUSH-PULL CableORDER NO. 098-00210
For use when obstructionsprevent thru tube installation.Fits over motor mountingbolts. All parts furnished forsimple hook up. Constructedof aluminum and plated steel.
Johnson-Evinrude up to 140 HPORDER NO. 098-03470
Holds the steering cable at the rudder.Steering tube is provided with greasefitting and o-ring.All parts furnished for simple hook up.Stainless steel and aluminum makesthis kit corrosion resistant.
DUAL CABLE KIT for cables installed down same side of boat(port or starboard). Steering tube is provided with grease fittingand o-ring. All parts provided for simple hook up. Stainless steeland aluminum makes this kit corrosion resistant.
For use with engine manufacturer’s steering arm.
Steering Link Arm not included in this kit
Yamaha 115-220 HP 1984 and newerORDER NO. 098-03792
Johnson-Evinrude 70-235HP, 1977 thru 1988except 225HP
ORDER NO. 098-03794Johnson-Evinrude V-4 and V-6 1989 and newerexcept “Fast Track”
ORDER NO. 098-03789Johnson/Evinrude “Fast Track” mid section,3 cylinder thru V-6 1991 & newer,except 88 HP and 112 HP.
ORDER NO. 098-03799
Steering Link Arm not included in this kit.
Mercury 1980 and newer Black MaxMariner 1980 and newerFits all Mercury-Mariner 2.4Suzuki 150-150SS-200 HP 1986 and newerSuzuki 115-140 HP 1987 & newer
ORDER NO. 098-03798
STEERING CONNECTION KITS
098-03792
098-03798
For more information see: www.trmarine.com24
STEERING CONNECTION KITS
Adjustable to 31" centers. All parts furnished for simple hook up. Stainless steelmakes this kit corrosion resistant.
YAMAHA 115-225 1984 & NewerJOHNSON/EVINRUDE 50-235 HPMERCURY 40-225 HPMARINER 40-225 HPSUZUKI 150-150SS-200 HP 1986 & NewerORDER NO. 098-09805
TILLER EXTENSIONThis tiller extension bolts onto the front of thetiller arm so that a dual tie bar can be used.Constructed of stainless steel.
MERCURY MARINER 70 -225 HP 1989 & Newer
ORDER NO. 098-09810
INBOARD OR OUTBOARD TIE BAR
STEERING TUBE CLEANING BRUSH
STEERING CABLE BOOT
Protects against cable freeze-up, rustand corrosion. Extend steering cable life.Keeps steering cable lubricated.Fits most domestic and foreign outboardand I/O steering cable.
ORDER NO. 098-00034
935-52600
Clean corroded engine tilt tubes with T&R steering tube cleaning brush.Constructed of steelwire with 8" shaft. For use with electric drill motor.
ALL TILT TUBE ENGINES
ORDER NO. 098-00010
AUXILIARY MOTOR STEERING KITSAn auxiliary motor steering kit is the ideal way to provide remote controlsteering for any type or size of outboard trolling motor up to 25 horse-power.The model 55-2400 is constructed of Zinc plate steel. The model 55-2600 isconstructed of stainless steel.Non-corrosive for saltwater applications.
ORDER NO. Mfr. No. Description075-45000 55-2400 Aux. Motor Steering Kit-Zinc935-52600 55-2600 Aux. Motor Steering Kit-SST075-54010 99-09028 Ball Joint only
075-45000
For more information see: www.trmarine.com25
STEERING CONNECTION KITS
KICKER STEERING/ACCESSORIES
26For more information see: www.uflexusa.com
*Since this is currently supplied product and may be relatively new, replacement of entire system may not be necessary.Please consult your dealer to determine which part of the system may need to be replaced.
OMC® TT KITThru transom sterndrive steering kit applicable for OMC®sterndrives manufactured from 1968-1982.Connects standard mechanical steering cable to the transomand sterndrive.
ORDER NO. 351-10000
STEERING ADAPTER KITFOR THRU-TRANSOM OMC STERN DRIVES
For more information see: www.teleflexmarine.com
SEASTAR KICKER CABLE TIE BAR KITThis new SeaStar product allows a user to manually steer an auxiliary engine (kicker motor) usingtheir existing SeaStar hydraulic steering system. Today this is accomplished with a variety of solidmechanical linkages between the main engine and the auxiliary engine. Teleflex has developed apatent pending design that incorporates a cable as the linkagebetween the two engines.
Features• Flexible cable allows for adjustable locations of kicker motor.• Allows independent trim/tilt of both engines.• Allows full steering stroke of both engines.• Simplified installation using universal ABYC steering connection(as per ABYC P17 & P21 standards) on kicker motor.• Retrofittable to Sea Star Front Mount Cylinders• Incorporates unique patented Teleflex cable technology
HO61XX Kit Includes:1 - Steering Cable Assembly (TFXtreme 40 series cable and a custom drilled out support rod)1 - Pivot Cylinder Drive Link-arm (connects the drive bracket to one side of the cable assembly)1 - Pivot Cylinder Drive Plate (allows for the link-arm to mount to the pivot cylinder pivot plate)2 - Support Brackets (keyed version for use with this product)Fasteners included.
Not Included: Drive/drag link from auxiliary (kicker) engine to the end of the kicker steering cable.
OUTBOARD HYDRAULIC STEERING
ORDER NO. Mfr. No. Max. Engine Cable Length Cable TypeHorsepower Nominal
039-61160 HO6116 20 HP 16" 40 Series
039-61220 HO6122 20 HP 22" 40 Series
039-61280 HO6128 20 HP 28" 40 Series
039-61340 HO6134 20 HP 34" 40 Series
039-61440 HO6144 20 HP 44" 40 Series
Installation Note: Kicker Cable Tie Bar systems require a minimum clearance of 14 " from the endof the tilt tube towards the motor side well or gunnel.
KICKER STEERING
For more information see: www.marinetechproducts.com27
T5 - THROUGH TILT TUBE ELECTRO STEERT5 provides a unique solution to steer a kicker motor. Can be installed on kickermotor with threaded tilt tube without drilling any holes in the boat. Installs inminutes and requires only 4 inches between main engine and kicker. Mountinghardware included. Controlled by a 2 button hand held remote with 24' cable.Optional wireless remote available see ORDER NO. 934-55105.
ORDER NO. Mfr. No. Description934-55502 55-0502 Freshwater Model (Zinc)934-55503 55-0503 Saltwater Model (Stainless Steel)934-55022 99-55022 Relay Control
T4 - ELECTRO STEERUnique product to steer a kicker motor. Can be installed on any kicker motor thathas a threaded tilt tube. No need to drill holes in your transom. Installs in minutes.9" minimum needed between main engine and kicker motor. Mounting hardwareincluded. Controlled by a 24' cable and two button hand held remote. Available inFreshwater model (all component hardware made of zinc) and Saltwater model (allcomponent hardware made of stainless steel).Optional wireless remote available see ORDER NO. 934-55105.
ORDER NO. Mfr. No. Description934-55102 55-0102 Freshwater Model (Zinc)934-55102-A 55-0102AUTO T4 Autopilot Drive Freshwater934-55103 55-0103 Saltwater Model (Stainless Steel)934-55022 99-55022 Relay Control
ELECTRO STEERTrolling Made Easy....Steer your kicker from anywhere in the boat. The Panther100 Electro Steer is easy to install anywhere in the transom area. It operates themotor with the push of a button. Powered from the cranking battery; maximumamp draw: 5 to 7.5 amps. And fast? The Electro Steer will move from full right toleft in only four seconds, with fast, precision kicker control, necessary for contourtrolling. The connecting rod between the main and kicker motor easilydisconnects, allowing versatile applications. Available in Freshwater Models(all components hardware made of zinc), and Saltwater Models (all componenthardware made of stainless steel).
ORDER NO. Mfr. No. Description935-50100 55-0100A Freshwater Model (Zinc)935-50101 55-0101A Saltwater Model (Stainless Steel)934-55022 99-55022 Relay Control
WIRELESS REMOTE CONTROLAllows you to steer your kicker motor from anywhere in the boat.FCC and IC approved.• 50 Ft Range• Operates on 12v Battery• Universal Design• For “all” 2 bullet molded connectors• Adapted for “all” Panther Steering and Trim & Tilt units ever made• Does not interfere with other boat electronics• Fits in the palm of your hand• Lanyard included ORDER NO. 934-55105
Mfr. No. 55-0105
934-55105
934-50100
934-55102-A
934-55102
934-55502
For more information see: www.marinetechproducts.com28
MODEL # EZ-35003Kit Consists of:1) BRAVO BRACKET ASSEMBLY2) LONG ROD (29" - 50")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-35003
MODEL # EZ-35002Kit Consists of:1) BRAVO BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-35002Note: With a 3/4 or full swimplatformpoint the quick connectoron the main bracket down.
3. Small O.B. Bracket Assembly (4")1. Bravo Bracket Assembly 2. Rod
3. Small O.B. Bracket Assembly (4'')
MODEL # EZ-37003KIT CONSISTS OF:1) ALPHA I - 2G BRACKET ASSEMBLY2) LONG ROD (29" - 50")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-37003
MODEL # EZ-37002KIT CONSISTS OF:1) ALPHA I - 2G BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-37002
1. Alpha I-2G Bracket Assembly 2. Rod
3. Small O.B. Bracket Assembly (4")
MODEL # EZ-30003KIT CONSISTS OF:1) ALPHA I BRACKET ASSEMBLY2)LONG ROD (29" - 50")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-30003
MODEL # EZ-30002KIT CONSISTS OF:1) ALPHA I BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-30002
1. Alpha I Bracket Assembly 2. Rod
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
MERCRUISER (BRAVO)
MERCRUISER (ALPHA 1)
# 511-35010
3. Small O.B. Bracket Assembly (4")1. Bravo Bracket Assembly 2. Rod
# 511-50010
3. Small O.B. Bracket Assembly (4'')
# 511-50010
E.Z. BRAVO
# 511-37010
1. Alpha I-2G Bracket Assembly 2. Rod
E.Z. ALPHA I-2G
3. Small O.B. Bracket Assembly (4")
# 511-50010# 511-30010
1. Alpha I Bracket Assembly 2. Rod
E.Z. MERC
MERCRUISER (ALPHA I - 2G)
AUXILIARY OUTBOARD STEERING
For more information see: www.marinetechproducts.com29
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
MODEL # EZ-23003Kit Consists of:1) COBRA S/P BRACKET ASSEMBLY2) LONG ROD (29" - 50")3) SMALL O.B. BRACKET ASSEMBLY (3")
ORDER NO. 511-23003
OMC (COBRA) S/P (SWIM PLATFORM MODEL)
OMC (COBRA)
OMC
# 511-23010
3. Small O.B. Bracket Assembly (3")1. Cobra S/P Bracket Assembly 2. Rod
# 511-50020
3. Small O.B. Bracket Assembly (4")
# 511-50010
# 511-50010
E.Z. COBRA S/P
MODEL # EZ-22002Kit Consists of:1) COBRA BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (4")
ORDER NO. 511-22002
# 511-22010
1. Cobra Bracket Assembly 2. Rod
E.Z. OMC COBRA
3. Small O.B. Bracket Assembly (4")
MODEL # EZ-20002Kit Consists of:1) OMC BRACKET ASSEMBLY2) STANDARD ROD (23'' - 36'')3) SMALL O.B. BRACKET ASSEMBLY (4'')
ORDER NO. 511-20002
# 511-20010
1. OMC Bracket Assembly 2. Rod
E.Z. OMC
AUXILIARY OUTBOARD STEERING
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
3. Small O.B. Bracket Assembly (3")
# 511-50020
For more information see: www.marinetechproducts.com30
VOLVO II
3. Small O.B. Bracket Assembly (3'')
# 511-50020
MODEL # EZ-42002KIT CONSISTS OF:1) VOLVO II BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (3")
ORDER NO. 511-42002
# 511-420101. Volvo II Bracket Assembly 2. Rod
E.Z. VOLVO II
VOLVO SX / COBRA
3. Auxilary Bracket Assembly 4"
MODEL # E.Z. 44002Kit consists of:1) VOLVO SX / COBRA BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) AUXILIARY BRACKET ASSEMBLY (4")ORDER NO. 511-44002
1. Volvo SX / Cobra Bracket Assembly 2. Standard Rod (23" - 36")
VOLVO I (PRE-1989)
MODEL # EZ-40002KIT CONSISTS OF:1) VOLVO I BRACKET ASSEMBLY2) STANDARD ROD (23" - 36")3) SMALL O.B. BRACKET ASSEMBLY (3")
ORDER NO. 511-40002
# 511-40010
1. Volvo I Bracket Assembly 2. Rod
E.Z. VOLVO I
Mfr. No. EZ.10002ORDER No. 511-10002
Mfr. No. EZ.50010ORDER No. 511-50010
Mfr. No. EZ.44010ORDER No. 511- 44010
AUXILIARY OUTBOARD STEERING
3. Auxilary Bracket Assembly (3")
MODEL # E.Z. 70001Kit consists of: 1) Sailboat Bracket Assembly 2) Short Rod (19" - 27") 3) Auxiliary Bracket Assembly (3")ORDER NO. 511-70001
1. Sailboat Bracket Assembly 2. Short Rod (19"-27")
Mfr. No. EZ.50020ORDER No. 511-50020
Mfr. No. EZ.10001ORDER No. 511-10001
Mfr. No. EZ.70010ORDER No. 511-70010
SAILBOAT
OTO STANDARD (WHEN THE AUXILIARY IS MOUNTED ON A LIFT BRACKET)
3. Small O.B. Bracket Assembly (4'')
# 511-50010
MODEL # EZ-60002KIT CONSISTS OF:1) LARGE O.B. BRACKET ASSEMBLY2) STANDARD ROD (23'' - 36'')3) SMALL O.B. BRACKET ASSEMBLY (4'')
ORDER NO. 511-60002
2. Standard Rod (23”-36”)
E.Z. OTO
3. Small O.B. Bracket Assembly (4'')
# 511-50010
MODEL # EZ-60001KIT CONSISTS OF:1) LARGE O.B. BRACKET ASSEMBLY2) SHORT ROD (19'' - 27'')3) SMALL O.B. BRACKET ASSEMBLY (4'')
ORDER NO. 511-60001
# 511-60010
1. Large O.B. Bracket Assembly 2. Standard Rod (19”-27”)
E.Z. OTO SHORT
OUTBOARD TO OUTBOARD (OTO) SHORT (WHEN THE AUXILIARY IS TRANSOM MOUNTED)
1. Large O.B. Bracket Assembly
For more information see: www.marinetechproducts.com31
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
# 511-60010
AUXILIARY OUTBOARD STEERING
For more information see:www.marinetechproducts.com
32
EVINRUDE 150 FFIEvinrude 150 FFI Bracket Assembly 65010
Mfr. No. EZ 61010ORDER NO. 511-61010
HONDA 35-50 HP: Place the U shaped brackets around the housing between theupper flange and the middle flange above the cavitation plate.Place washer on bolt, slide through holes of both bracket and front plate, slide on another washer andnylock nut. Repeat on other side and tighten. Before bracket is tightened completely, place T-wedgeunder pin to prevent bracket from sliding.
75-90 HPMfr. No. EZ 62010ORDER NO. 511-62010
HONDA 75-90 HP: Place the widest U shaped bracket around the exhaust housing just above the middlewave plate. The longer portion of the bracket assembly goes on the back side (prop side) of the motor.Use the bolts and nylock nuts to fasten the two portions of the bracket together.
Mfr. No. EZ 65010ORDER NO. 511-65010
EVINRUDE 150 FFI: Remove top bolts, place a spacer and a flat washer over hole. Line up bracket over spacerand place a washer on bolt. Insert the bolt back into hole and tighten. Repeat for other bolts.
115-130 HPMfr. No. EZ 63010ORDER NO. 511-63010
OUTBOARD TO OUTBOARD
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
HONDA 35-50 HP
HONDA 75-90 HP
EVINRUDE 150 FFI
EVINRUDE/SUZUKI 70 4-STROKE
HONDA 35-50 HPHonda 35-50 HP Bracket Assembly 61010
HONDA 75-90 HP / HONDA 115-130 HPHonda 75-90 HP Bracket Assembly 6201
Mfr. No. EZ 64010ORDER NO. 511-64010
EVINRUDE/SUZUKI 70 4-Stroke: Place wedge under pin to stop bracket from sliding up. Place washer on bolt,slide through holes of both bracket and front plate, slide on another washer and nylock nut.Repeat on other side and tighten.
Order No. Mfr. No. Description511-68010 EZ-68010 Merc 75-115 Round Nose511-69010 EZ-69010 Merc 75-115 EFI Square Nose511-76010 EZ-76010 Evinrude E-TEC 20"511-82010 EZ-82010 Yamaha 200 HPDI511-84010 EZ-84010 Yamaha F200/225511-88010 EZ-88010 Honda F115/150511-93010 EZ-93010 Evinrude E-TEC 250
EVINRUDE/SUZUKI 70 4-STROKEEvinrude/Suzuki 70 4-Stroke Bracket Assembly 64010
AUXILIARY OUTBOARD STEERING
For more information see: www.marinetechproducts.com33
NEW STYLE RODS - FLUORESCENT YELLOW CAUTION LABEL ON OUTER ROD
QUICK CONNECTORMfr. No. EZ 13200
ORDER NO. 511-13200
OUTER TUBE BALL JOINTMfr. No. EZ 10300
ORDER NO. 511-10300
SHORT ROD ASSEMBLYRanges From 19" to 29"Mfr. No. EZ 10001
ORDER NO. 511-10001
LONG ROD ASSEMBLYRanges From 29" to 50"Mfr. No. EZ 10003
ORDER NO. 511-10003
DETENT KIT ASSEMBLYMfr. No. EZ. 11000
ORDER NO. 511-11000
INNER TUBE BALL JOINTMfr. No. EZ. 10400
ORDER NO. 511-10400
STANDARD ROD ASSEMBLYRanges From 23" to 36"Mfr. No. EZ. 10002
ORDER NO. 511-10002
ULTRA ROD ASSEMBLYRanges From 34" to 58"Mfr. No. EZ. 10006
ORDER NO. 511-10006
ORDERING TIPTo determine the correct rod length required, place both engines in the down running
position, and measure the actual center to center distance between the housings.If your measurement is between:
ORDER NO. Mfr. No. Length Description511-10001 EZ-10001 19" - 22" Short Rod Assembly511-10002 EZ-10002 23" - 26" Standard Rod Assembly934-10004 EZ-10004 27" - 28" Medium Rod Assembly511-10003 EZ-10003 29" - 33" Long Rod Assembly511-10006 EZ-10006 34" - 38" Ultra Rod Assembly934-10005 EZ-10005 39" + X-Long Rod Assembly
ORDER NO. Length Description511-50010 EZ-50010 Auxiliary Bracket 4"511-50020 EZ-50020 Auxiliary Bracket 3"511-50070 EZ-50070 Auxiliary Bracket 7"511-55010 EZ-55010 Electric Motor Bracket511-58010 EZ-58010 Suzuki 4 Stroke 15" Shaft
By following this simple step it will help insure you are getting the correct length rodfor your application.Note: Please contact technical support for applications
Place bracket between flanges on lower part of engine just abovethe cavitation plate. Put a washer on bolt and slide throughprepunched hole in front plate and then through hole in backplate. Place 2nd washer on bolt and nylon lock nut.Repeat on the other side and tighten securely.The size of bracket will vary slightly depending on which engineyou have.
JOHNSON / EVINRUDEOUTBOARDS
** SHORT SHAFT **Mfr. No. E.Z. - 56010
ORDER NO.511-56010
MERCURYOUTBOARDS
** SHORT SHAFT **Mfr. No. E.Z. - 54010ORDER NO.511-54010
Also fits “Bigfoot” 9.9 & 15 HP
YAMAHAOUTBOARDS
** SHORT SHAFT **Mfr. No. E.Z. - 52010ORDER NO.511-52010
HONDAOUTBOARDS
** SHORT SHAFT **Mfr. No. E.Z. - 57010ORDER NO.511-57010
AUXILIARY BRACKET OPTIONS SHORT SHAFT ENGINE BRACKET
**Needed for 4-stroke models**
E.Z. STEER™ BY MARINE TECHSteering For Your Auxiliary Outboard Motor
AUXILIARY OUTBOARD STEERING
For more information see: www.teleflexmarine.com34
OPTIONS
NOTES:1. Ensure there is no interference between the BayStar cylinder rod andthe splashwell boot or engine controls & cables.
2. Dimensional restrictions also apply to external motor mount brackets.3. Ensure dimension “A” can be maintained at 32" (813mm) throughoutthe full trim/tilt range.
4. Maximum allowable transom thickness for BayStar cylindersis 3" (76mm).
5. Engines less than 70 HP may require up to 1" (25mm) of additionalsplashwell clearance.
COMPLETE SYSTEM
Baystar 1.1 - Front Mount Helm HH4311 038-43110
BayStar 1.4 - Sport Tilt Helm HH4315 038-43150
SeaStar Oil (1 Gallon) HA5440 033-54400
Helm Service KitComes with wheel shaft nut, key,shaft seal & seal plate
HP6032 037-60320
SERVICE ITEM
BayStar 1.4 Front Mount Helm HH4314 038-43140
BayStar Compact Cylinder HC4645H 036-46450
BayStar Compact Cylinder HC4647H 036-46470
BayStar Compact Cylinder HC4648H 036-46480
BayStar Compact Cylinder HC4658H 036-46580
HK4200 Tubing (2 x 20’ lengths) HT4420H 039-44250
HK4230 Tubing (2 x 30’ lengths) HT4430H 041-44300
SeaStar Oil (1 Quart) HA5430 033-54300 (X2)
BayStar Filler Kit HA5438 033-54380
COMPONENTS
NOTE: SeaStar Outboard Steering hoses (Part No. 039-51XX0) can be used to plumbBayStar Steering Systems.
DESCRIPTION Mfr. No. ORDER NO.
BayStar Steering Kit (20’ tubing run) HK4200A 034-42000
BAYSTAR HYDRAULIC STEERINGCOMPACT CYLINDER SYSTEM:With mechanical steering you sacrifice a degree of comfort, andtraditional hydraulic systems may be more than is needed on lowerhorsepower outboard engines. Built in the tradition of SeaStar,BayStar brings the same efficiency and durability you would expect fromTeleflex Hydraulic steering to smaller outboards up to 150 HP. Compactform and affordable price make it an ideal upgrade for mechanicallysteered boats up to 150 total HP.
APPLICATIONS:BayStar is for single-outboard powered boats rated up to 150 HP,including runabouts and inflatables — and outboard engines with ABYCstandard engine tilt tubes up to 150 HP (total).For single station, single engine use only. BayStar is not intended for highspeed, high performance type boats, such as Bass Boats.
FEATURES:• Designed just for smaller outboards.• Low friction hydraulic steering system.• 5 turns from lock-to-lock.• Balanced cylinder, featuring a compact design that fits mostsplashwells and provides full engine movement.
• Optional five position tilt helm available.• Compact helm has only a 5” footprint; needs only 3” dash hole(standard or Tilt).
• Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit anddetailed instructions.
• Standard 3/4" tapered steering shaft.• Fast, easy installation.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
BAYSTAR OUTBOARDSTEERING SYSTEM
CYL. MODEL NO. NO. OF ENG. A B C MIN. ENG. CENTRE DIST TWIN ENG. APPL.
HC4645 / 47/ 48 / 58 1 21" / 534 mm 6" / 153 mm 5" / 127 mm N/A N/A
HYDRAULIC OUTBOARD STEERING
For more information see: www.teleflexmarine.com35
NOTES:1. Requires Spacer Kit Part No. 039-50900.2. Engine clamp brackets must be cut orground, and the engine through bolted ontothe transom, or interference will occur,restricting engine trim and tilt.
3. Steering hook YamahaPart No. 63D-48511-00-4D must be installed.
4. Cylinder # 036-46450 may be usedin these applications.The pivot plate will need to be flipped beforeinstallation. Instructions provided withOwner’s Manual.
*BAYSTAR CYLINDER PIVOT PLATES:036-46450 compact cylinder is included in the BayStar steering kits. This cylinder can beconverted to # 036-46580 by following instructions included with the product. If your enginerequires use of a cylinder other than # 036-46450 or # 036-46580, please refer to the figurebelow for the appropriate replacement pivot plate, which must be purchased separately.*NOTE: Read and understand all related product instructions before performing
any work on a hydraulic steering system.
BAYSTAR SINGLE ENGINEAPPLICATION GUIDE(BAYSTAR SINGLE ENGINE HC4645H/47H/48H/58H)
FORCE 1985-DATE 90-150 HP 036-46450
HONDA 1992 TO DATE 30-90 HP 036-464501998 TO DATE 115-130 HP 036-46470*2001 TO DATE 150 HP 036-464502003 TO DATE BF135 HP 036-46450
JOHNSON EVINRUDE 1977 TO 1989 65-150 HP 036-46480*Note: Johnson 115 HP 1991 TO DATE 40-150 HP 036-464502-Stroke engines, require 1997 TO DATE 115 HP Ficht 036-46580 See Note 4the cylinder pivot to be flipped. 1997 TO DATE 75-150 HP Ficht 036-46450See Note 4 below 1998 TO DATE 40-140 HP 4-Stroke 036-46580 See Note 1, 4
MERCURY MARINER 1984 TO DATE 75-150 HP 036-46450
NISSAN 1990 TO DATE 120-140 HP 036-46450
SUZUKI 1986 TO DATE 150 HP 036-464501996 ONLY 115-140 HP N/A1987 TO 2002 115-140 HP 036-46450 See Note 11990 TO 2000 90-100 HP 036-464501998 TO DATE 40-70 HP 4-Stroke 036-46450 See Note 12001 TO DATE 115-140 HP 4-Stroke 036-46580 See Note 1, 4
TOHATSU 1990 TO 2007 50-150 HP 036-464502007 TO DATE 50-150 HP 036-46480*
YAMAHA 1998 TO DATE 40-50 HP 036-46450 See Note 21998 TO DATE 60 HP 036-46450 See Note 31986 TO DATE 70-90 HP 036-46450 See Note 11997 TO DATE 80-150 HP 4-Stroke 036-464502000 TO DATE 25 & 60 HP 4-Stroke 036-46480* See Note 1
YANMAR 1990 TO DATE 27-36 HP 036-46450*
ENGINE MAKER /BRAND YEAR MODEL CYLINDER PART NOTESNUMBER
ORDER NO. 033-46410(Install onto # 036-46450 tomake # 036-46470)
ORDER NO. 033-46420(Install onto # 036-46450 tomake # 036-46480)
HYDRAULIC OUTBOARD STEERING
SEASTAR PROPIVOT MOUNT CYLINDEROUTBOARD SYSTEM
36
SEASTAR STEERING(FRONT MOUNT PIVOT CYLINDER)SYSTEM:Unmatched comfort and control. Only with SeaStar steering. Theworld’s most popular outboard hydraulic system offers smooth,superefficient steering for today’s high performance hulls with singleor multiple outboards up to 700 HP combined.It’s the OEM Choice for centre consoles, cruisers and more.
APPLICATIONS:Single and dual non-power-assisted outboard engines up to 350 HP(700 combined HP for counter-rotating duals) that have ABYCstandard engine tilt tube.Ideal for cruisers, runabouts, center console boats, offshore fishingboats and many more. Suitable for speeds up to 60 MPH and dualstation use (with purchase of extra helm, hose & fittings). Allowsindependent engine tilt in dual engine installations. Dual enginesrequire purchase of a tie bar kit and extra hardware.
FEATURES:• Patented steering lock valves.• Low friction hydraulic steering system.• 5 turns from lock-to-lock (single cylinder) when using 1.7 helms.• Compact helm has only a 4-7/16" footprint; needs only 3" dash hole(Tilt requires larger dash cut out).
• Packaged complete with helm, cylinder, fittings, oil, bleeder kit anddetailed instructions.
• Standard 3/4" tapered steering shaft.• Fast, easy installation.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
OPTIONS
COMPLETE SYSTEMS
SeaStar 1.7 - Front Mount- COMMERCIAL Helm HH5217 038-52170
SeaStar 1.7 - REAR MOUNT Helm HH5261 038-52610
SeaStar 1.7 - SPORT TILT Helm HH6191 038-61910
SeaStar 1.7 - CLASSIC TILT Helm HH6541 038-65410
SeaStar 1.7 - SPORT PLUS TILTHelm HH6491 038-64910
SeaStar 2.4 - Front Mount- COMMERCIAL Helm HH5224 038-52240
SeaStar 2.4 - SPORT TILT Helm HH6192 038-61920
SeaStar 2.4 - CLASSIC TILT Helm HH6542 038-65420
SeaStar Round Bezel Kit HA5478 033-54780
SeaStar Backplate Kit HA5418 033-54180
SeaStar 20° Dash Wedge Kit HA5419 033-54190
SeaStar Bulkhead Hose Kit - 2 Hoses HO81 _ _ Special Order
SeaStar Twin Engine Tie Bar Kit HO5 _ _ _ See Appl. Guide
Add-A-Station/Autopilot Fitting Kit HF5501 037-55010
SeaStar Oil (1 Gallon) HA5440 033-54400
Helm Service KitComes with wheel shaft nut, key,shaft seal & seal plate
HP6032 037-60320
SERVICE ITEM
SeaStar 1.7 - Front Mount Helm HH5271 038-52710
Pivot Mount Outboard Cylinder (Black) HC5345 036-53450
SeaStar Hose Kit - 2 HOSESSee Page 50 HO51_ _
039-51XX0XX - Length in ft.
SeaStar Oil (1 Quart) HA5430 033-54300 (x2)
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
SeaStar 1.7 Steering Kit - NO HOSES HK6400A 034-64000
SeaStar TILT Steering Kit - CLASSIC HK6400TC 034-64000-TC
SeaStar TILT Steering Kit - SPORT HK6400TS 034-64000-TS
SeaStar YAMAHA Steering Kit HK6500Y 034-65000-Y
SeaStar YAMAHA TILT Steering Kit- CLASSIC HK6500YTC 034-65000-YTC
HYDRAULIC OUTBOARD STEERING
MAKER/BRAND YEAR MODEL PART NUMBER (COMPLETE) (COMPLETE) NOTES
FORCE 1985-DATE 90-150 HP 036-53450 039-50080 039-50080
HONDA 1996-DATE 75-90 HP 036-53450 039-60010 039-60020 Min. Eng. Center 27"1998-DATE 115-130 HP 036-53470 039-50630 039-50640 #039-506401998-DATE 30-50 HP 036-53450 039-60010 039-60020 Requires Kit 039-509002001-DATE 150 HP 4-Stroke 036-53450 039-60030 039-600202001-DATE 225 HP 4-Stroke 036-53450 039-60010 039-600202003-DATE BF135 HP 036-53450 039-60030 039-60020
JOHNSON/EVINRUDE 1977-1990 65-300 HP 036-53480 039-60030 039-600201988-1997 250-300 HP V8 036-53420 039-50010 039-50300 #039-503001991-DATE 40-250 HP 036-53450 039-60030 039-60020 Includes ETech Engines1996-DATE 75-250 HP Ficht 036-53450 039-60030 039-600201998-DATE 40-140 HP 4-Stroke 036-53580 039-60030 039-60020 Requires Kit 039-509002000-DATE 115 HP Ficht 036-53580 039-60030 039-60020 Requires Kit 039-509002002-DATE 200-225 HP 4-Stroke 036-53450 039-60030 039-600202005-DATE E250 DPX Vindicator 036-53480 039-60030 039-60020
MERCURY/MARINER 1984-1994 2.4/2.5 HP EFI 036-53450 039-60010 039-60020 See Note 11989-DATE 75-300 HP 036-53450 039-60010 039-60020 Min. Eng. Center 27"1996-DATE 75-200 HP 2&4-Stroke 036-53450 039-60010 039-600201998-DATE 30-60 HP 036-53450 039-60010 039-60020 Requires Kit 039-509002002-DATE 225 HP 4-Stroke 036-53580 039-60010 039-60020 See Note 22003-DATE 250-300 HP XS 036-63450 N/A 039-60020 See Note 3
NISSAN/TOHATSU 1990-2007 90-140 HP 036-53450 039-60010 039-60020
SUZUKI 1986-DATE 100 HP 036-53450 039-60030 039-600201986-2002 115-140 HP 036-53450 039-60010 039-60020 NOT 19961986-DATE 150-300 HP 036-53450 039-60030 039-600201996 ONLY 115-140 HP 036-53480 039-60010 039-600201998-DATE 40-140 HP 4-Stroke 036-53580 039-60030 039-60020 Requires Kit 039-509002003-DATE 90 HP 4-Stroke 036-53580 039-60030 039-60020 Requires Kit 039-50900
TOHATSU 2008-DATE 40-115 HP 036-53480 039-60030 039-60020
US MARINE (FORCE) 1996-DATE 90-120 HP 036-53450 039-60010 039-60020
YAMAHA 1990-DATE 40-90 HP 036-53450 039-60030 039-600201986-DATE 100-250 HP 2-Stroke 036-53450 039-60010 039-600201997-DATE 80-225 HP 4-Stroke 036-53580 039-60010 039-60020 See Note 22000-DATE 150-250 HP DI 036-53580 039-60010 039-60020 See Note 22002-DATE 300 HP DI 036-53580 039-60010 039-600202003-DATE 25-60 HP 4-Stroke 036-53480 039-60030 039-60020 Requires Kit 039-509002007-DATE F250-F350 036-53450 039-60010 039-60020
YANMAR 1994-DATE 90-120 HP 036-53450 039-60010 039-60020
ENGINE CYLINDER
TWIN ENGINE2- CYLINDERTIE BAR KIT
Note: These recommendations apply to factory stock outboards only.
TWIN ENGINE1- CYLINDERTIE BAR KIT
Note 1: May require extensive cowling modifications.Note 2: #036-53450 is optional for Single Engine Only applications. DO NOT use #036-53450 for twin engine applications as operational
interference may occour.Note 3: One cylinder per engine. Must use high strength supplied tiller bolt.
comes w/o tie bar
comes w/o tie bar
OUTBOARD STEERINGNON-POWER ASSISTED
SINGLE & DUAL ENGINE APPLICATION GUIDE
For more information see: www.teleflexmarine.com37
HYDRAULIC OUTBOARD STEERING
For more information see: www.teleflexmarine.com38
SeaStar Oil (1 Gallon) HA5440 033-54400
Helm Service KitComes with wheel shaft nut, key,shaft seal & seal plate
HP6032 037-60320
SERVICE ITEMS
OPTIONS
SEASTAR PRO STEERING(FRONT MOUNT CYLINDER)SYSTEM:
The ultimate steering for high speed single outboards,SeaStar PRO®, is designed for the high speed andperformance of today’s top-end bass boats. Recommendedfor single outboards up to 350 HP (even with jackplates andperformance props), SeaStar PRO has steered the BASSMasters Classic® since 1994 and it’s the choice of highperformance outboard boatbuilders.
APPLICATIONS:Seastar Pro is for high-performance boats with singlenon-power-assisted outboards up to 300 HP, especiallythose capable of speeds over 60 MPH, which demandmaximum steering control and comfort. It is suitable for usewith high-performance propellers and jack plates.
FEATURES:• Patented steering lock valves.• Low friction hydraulic steering system.• 4.25 turns from lock-to-lock.• Compact helm has only a 4-7/16" footprint— needs only 3" dash hole (Tilt requires larger hole).
• Optional PRO Cylinders with longer shaft bushingsand larger pivot bushings for an even more solid feel!• Optional hoses with through-bulkhead fittings; multiplehelm mounting options• Factory swaged hoses are Kevlar® reinforced.• Packaged complete with helm, cylinder, fittings, oil,bleeder kit and detailed instructions.• Standard 3/4" tapered steering shaft.• Fast, easy installation.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
COMPLETE SYSTEMS
SeaStar PRO 1.7 - Front Mount Helm HH5779 038-57790
SeaStar PRO 2.0 - SPORT TILT Helm HH6190 038-61900
SeaStar PRO 2.0 - CLASSIC TILT Helm HH6574 038-65740
SeaStar PRO 2.4 - Front Mount Helm HH5772 038-57720
Pivot Mount Cylinder - PRO (Black) HC6345 036-63450
SeaStar Round Bezel Kit HA5478 033-54780
SeaStar Backplate Kit HA5418 033-54180
SeaStar 20° Dash Wedge Kit HA5419 033-54190
SeaStar Bulkhead Hose Kit - 2 Hoses HO81 _ _ Special Order
SeaStar Twin Engine Tie Bar Kit HO5 _ _ _ See Appl. Guide
Add-A-Station/Autopilot Fitting Kit HF5501 037-55010
SeaStar PRO 2.0 - Front Mount Helm HH5770 038-57700
Pivot Mount Outboard Cylinder HC5345 036-53450
SeaStar PRO Hose Kit - 2 HOSESSee Page 50
HO57_ _039-57XX0XX - Length in ft
SeaStar Oil (1 Quart) HA5430033-54300(x 2)
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
SeaStar PRO Steering Kit - NO HOSES HK7400A 034-74000
SEASTAR PROPIVOT MOUNT CYLINDEROUTBOARD SYSTEM
Hoses extra
HYDRAULIC OUTBOARD STEERING
ENGINE/CYLINDER QTY.CONFIGURATION COMPONENT DESCRIPTION REQ’D MODEL PART NO.
SINGLE ENGINE CYLINDER (See Application Guide) 1 PIVOT FRONT MOUNT 036-_ 3_ _0(SINGLE CYLINDER) HELM 1 *SEASTAR PRO 038-57700Applications up to 300 HP HOSE KIT 1 *SEASTAR PRO HOSE 039-57xx0maximum Number of Turns: 4.25 OIL 3 SEASTAR OIL (QT.) 033-54300
xx = No. of feet required (See Page 50)
OPTIONAL EQUIPMENT BACK PLATE KIT (FRONT MOUNT HELMS) 033-5418020 DEGREE WEDGE (FRONT MOUNT HELMS) 033-54190SPORT TILT HELM SEASTAR PRO 038-61900CLASSIC TILT HELM SEASTAR PRO 038-65740BULKHEAD HOSE KIT SEASTAR PRO HOSE (HO82_ _) Special OrderPRO CYLINDER HC 6345 036-63450POWER ASSIST PRO STEERING PA1315_2 034-13150
For more information see: www.teleflexmarine.com39
CYLINDERENGINE MAKER /BRAND YEAR MODEL PART NUMBER NOTES
Must use high strength TILLER bolt,#033-58220 (this bolt is shipped withALL current front mount pivot cylinders)
• Do NOT use with unbalanced cylinder.• SeaStar PRO is for single engine applications only.• The recommendations shown above apply to factory stock outboards only. Modified installations may require a higher capacity steeringsystem. (Cylinder volume / helm displacement = number of turns.) If in doubt, contact Teleflex Canada technical service for assistance.• Some applications vary from what is depicted in this catalog. Always consult SeaStar manual for diagrams specific to your application.• Interference between the cylinder and boat can occur under certain conditions. Check installation thoroughly throughout the full range ofmovement for engine tilt and trim (and jack plate, if present).• For all Seastar PRO outboard systems: use only SeaStar PRO Hose Kit Part No. HO57_ _ or HO82_ _, where last two digits equal length in feet.
APPLICATION GUIDE
PREMIUM OUTBOARD STEERINGFRONT MOUNT CYLINDER
FORCE 1985-DATE 90-150 HP 036-53450
HONDA 1996-DATE 150-300 HP 036-53450
JOHNSON/EVINRUDE 1977-1990 150-300 HP 036-53480 Contact Teleflex2002-DATE 150-250 HP, 4-Stroke 036-534502003-DATE 150-350 HP, ETech 036-534502005-DATE E250HP, Vindicator 036-53480 Contact Teleflex
MERCURY/MARINER 1989-DATE 150-300 2 Stroke, 4-Stroke 036-53450AND XS ENGINES
SUZUKI 1986-DATE 150-250 HP, 2-Stroke, 4-Stroke 036-53450
YAMAHA 1986-DATE 150-250 HP, 2-Stroke, 4-Stroke 036-534502002-DATE 300 HPDI 036-535802007-DATE YAMAHA, F250-F350 036-53450
SEASTAR PRO ORDERING GUIDE
NOTES:
SEASTAR PRO LOCK VALVE SYSTEM:SeaStar PRO’s unique valve system keeps pressure in the two hydraulic lines about equal, so the wheel feels solid and sure at all times.SeaStar PRO is the only hydraulic steering system uniquely designed to give you maximum steering comfort and control of your
high-performance bass boat.SeaStar PRO has been installed on premium bass boats as original equipment for many years. It’s the ideal upgrade for twin-cable
mechanical steering.
HYDRAULIC OUTBOARD STEERING
ENGINE/CYLINDER COMPONENT QUANTITYCONFIGURATION DESCRIPTION REQ’D MODEL PART NO.
SINGLE ENGINE CYLINDER (See Application Guide) 1 PIVOT MOUNT 036-_3_ _0(SINGLE CYLINDER) HELM 1 *SEASTAR 1.7 038-52710Applications up to 350 HP maximum HOSE KIT 1 OUTBOARD HOSE 039-51xx0NUMBER OF TURNS: 5 OIL 3 SEASTAR OIL (QT.) 033-54300
For Extra Steering Station Add:HELM 1 *SEASTAR 1.7 038-52710FITTING KIT 1 ADD A STATION 037-55010HOSE KIT 1 OUTBOARD HOSE 039-51xx0OIL 1 SEASTAR OIL (QT.) 033-54300xx = No. of feet required (See Page 50)
DUAL ENGINE CYLINDER (See Application Guide) 1 PIVOT MOUNT 036-_3_ _0(SINGLE CYLINDER) TIE BAR KIT 1 SEE APPLICATION GUIDE 039-600x0Non-Counter-Rotating Applications HELM 1 *SEASTAR 1.7 038-52710to 450 HP max; Counter-Rotating HOSE KIT 1 OUTBOARD HOSE 039-51xx0Applications to 700 HP maximum. OIL 3 SEASTAR OIL (QT.) 033-54300NUMBER OF TURNS: 5
For Extra Steering Station Add:HELM 1 *SEASTAR 1.7 038-52710FITTING KIT 1 ADD A STATION 037-55010HOSE KIT 1 OUTBOARD HOSE 039-51xx0OIL 1 SEASTAR OIL (QT.) 033-54300
xx = No. of feet required (See Page 50)
DUAL ENGINE CYLINDER (See Application Guide) 2 PIVOT MOUNT 036-_3_ _0(DUAL CYLINDERS) TIE BAR KIT 1 SEE APPLICATION GUIDE 039-600x0Non-Counter-Rotating Applications HELM 1 **SEASTAR 2.4 038-52720to 450 HP max; All Counter-Rotating HOSE KIT 1 OUTBOARD HOSE 039-51xx0Engine Applications HOSE KIT 1 OUTBOARD HOSE 039-51xx0NUMBER OF TURNS: 7 HOSE KIT 1 OUTBOARD HOSE 039-51xx0
FITTING 1 TEE FITTINGS (PIC) 037-55300OIL 3 SEASTAR OIL (QT.) 033-54300For Extra Steering Station Add:HELM 1 **SEASTAR 2.4 038-52720FITTING KIT 1 ADD A STATION 037-55010HOSE KIT 1 OUTBOARD HOSE 039-51xx0OIL 1 SEASTAR OIL (QT.) 033-54300xx = No. of feet required (See Page 50)
OPTIONAL EQUIPMENT BACK PLATE KIT (FOR STANDARD HELMS) 033-5418020 DEGREE WEDGE (FOR STANDARD HELMS) 033-54190AUTOPILOT FITTING KIT (ALL HELMS) 037-55010TILT HELM- SEA STAR I *SEASTAR 1.7 038-65410TILT HELM - SEA STAR II **SEASTAR 2.4 038-65420REAR MOUNT HELM- SEA STAR I *SEASTAR 1.7 038-52610REAR MOUNT HELM - SEA STAR II **SEASTAR 2.4 038-52620POWER ASSIST STEERING PA1200-2 034-12000xx = No. of feet required (See Page 50)
OUTBOARD STEERINGSINGLE & DUAL ENGINE ORDERING GUIDE:
PIVOT MOUNT SYSTEMS
For more information see: www.teleflexmarine.com40
HYDRAULIC OUTBOARD STEERING
41
HYDRAULIC OUTBOARD STEERING
TOURNAMENT SERIES CYLINDER AND ADJUSTABLE TIE BARExtreme heavy duty cylinders and tie bars designed primarily for high performance twin and triple engine applications.Also available for single engine applications.
• Suitable for use with all SeaStar Helms & SeaStar Power Assist• Heavy duty universal cylinder• Bolt-on stainless steel tie bar plates, also reversible (patent pending)• Robust design with heavy duty support brackets, barrel, shaft & seals• Superior corrosion resistance• New pivot plate design provides smooth articulation and a sealed joint (patent pending)• Heavy duty adjustable tie bar (patent pending)• Equipped with stainless steel adjustable o-ring sealed elbow fittings which can be easily
orientated in any direction
ORDER NO. Mfr. No. Descriptiion
036-68450 HC6845 O/B Cylinder Tournament 2, Front Mount
036-68450-S HC6845S O/B Cylinder Tournament 2, Front Mountc/w Single Engine Hardware Kit
039-68200 HO6820 Tie Bar, Adjustable, Tournament 2, Small
039-68210 HO6821 Tie Bar, Adjustable, Tournament 2, Medium
039-68220 HO6822 Tie Bar, Adjustable, Tournament 2, Large
039-68230 HO6823 Tie Bar, Adjustable, Tournament 2, X-Large
033-68020 HA6802 Hardware Kit T2, Twin Engine, Single Cylinder w/ Drive Bracket
033-68040 HA6804 Hardware Kit T2, Twin Engine, Dual Cylinder w/ FM Plates
033-68060 HA6806 Hardware Kit T2, Triple Engine, Dual Cylinder w/ FM Plates
033-68110 HA6811 Hardware Kit T2, Quad Engine, Dual Cylinder w/ FM Plates
037-60050 HF6005 ORB Tee Fitting KitFor more information see:www.teleflexmarine.com
Note:Each configuration requires ahardware kit and tie bar kit(s),with the exception of the single
engine configuration.
GENERAL INSTALLATION NOTES FOR ABOVE CHART1) Installation may vary according to the following factors: engine mounting height, transom thickness, use of transom savers,
tiller bolt hole location, engine tilt range, and engine size.2) For center engine drops greater than 3 inches (76mm), please consult Teleflex Technical Service.3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your nominal engine center to center distance.4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these recommendations may require stroke
limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.5) Cylinders must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.
TOURNAMENT SERIES APPLICATION GUIDE ALL ENGINE MAKES - 200+ HP
CONFIGURATIONCYLINDER HARDWARE KIT TIE BAR
NOTESMfr. No. Qty. Mfr. No. Qty. Mfr. No. Qty. CENTER TO CENTER
DISTANCE (IN.)CENTER TO CENTERDISTANCE (MM)
Single Engine HC6845S 1 Included N/A N/A N/A See note 1
Twin Engine -Single Cylinder (STBD) HC6845 1 HA6802 1
HO6821HO6822HO6823
125.0 - 25.625.7 - 30.630.7 - 39.0
635 - 650653 - 777780 - 991
See notes 1, 3, 4, 5HA6802 Drive Bracket
Availability - TBD
Twin Engine -Dual Cylinder HC6845 2 HA6804 1
HO6820HO6821HO6822HO6823
1
25.0 - 26.526.6 - 29.329.4 - 34.234.3 - 43.0
635 - 673676 - 744747 - 869871 - 1092
See notes 1, 3, 4, 5
Triple Engine -Dual Cylinder HC6845 2 HA6806 1 HO6821
HO6823 2 25.0 - 27.928.0 - 36.0
635 - 709711 - 914
Maximum drop:< 3 inches (76mm)See notes 1 thru 5
Quad Engine -Dual Cylinder HC6845 2 HA6811 1 CONSULT TELEFLEX TECHNICAL SERVICE See notes 1, 3, 4, 5
Quintuplet Engine (Plus) CONSULT TELEFLEX TECHNICAL SERVICE See notes 1, 3, 4, 5
For more information see: www.teleflexmarine.com42
OPTIONS
SeaStar Oil (1 Gallon) HA5440 033-54400
SERVICE ITEMS
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
SeaStar 1.7 - Front Mount Helm HH5271 038-52710
Side Mount Outboard Cylinder HC5370-3 036-53700-3
SeaStar Hose Kit - 2 HOSESSee Page 50 HO51_ _
039-51XX0XX - Length in ft.
SeaStar Oil (1 Quart) HA5430 033-54300
SeaStar 1.7 - Front Mt.- COMMERCIAL Helm HH5217 038-52170**
SeaStar 1.7 - REAR MOUNT Helm HH5261 038-52610
SeaStar 1.7 - SPORT TILT Helm HH6191 038-61910
SeaStar 1.7 - CLASSIC TILT Helm HH6541 038-65410
SeaStar 2.4 Front Mount Helm HH5272 038-52720
SeaStar 2.4 - Front Mount- COMMERCIAL Helm HH5224 038-52240
SeaStar 2.4 - SPORT TILT Helm HH6192 038-61920
SeaStar 2.4 - CLASSIC TILT Helm HH6542 038-65420
SeaStar Round Bezel Kit HA5478 033-54780
SeaStar Backplate Kit HA5418 033-54180
SeaStar 20° Dash Wedge Kit HA5419 033-54190
SeaStar Bulkhead Hose Kit - 2 Hoses HO81 _ _ Special Order
SeaStar Twin Engine Tie Bar Kit HO5009 039-50090
Add-A-Station/Autopilot Fitting Kit HF5501 037-55010
SEASTAR STEERING(SIDE MOUNT CYLINDER) SYSTEM:A great alternative for wide, shallow splashwells. SeaStar sidemount steering is a good choice for engines with threaded tilttubes that comply with ABYC P17/NMMA/BIA standards formechanical steering. The cylinder attaches to an engine tilt tubewhich meets the above standards.
APPLICATIONS:Single and dual non-power-assisted outboard engines up to300 HP (600 combined HP for counter-rotating duals) that havestandard engine tilt tube.
Suitable for speeds up to 60 MPH and dual station use (withpurchase of extra helm, hose & fittings).
Dual engines require purchase of a tie bar kit and extra hardware.For power steered engines, contact Teleflex Technical Service.
FEATURES:• Drag link design fits most engines with threaded tilt tubes.
Fast, easy installation.• Alternative to front mount cylinder where space allows,
especially useful in boats with shallow splashwells.• Suitable for use on engines with power steering.• 4.8/5.7 turns lock-to-lock using SeaStar 1.7 helm
(unbalanced cylinder).• Compact helm has only a 4-7/16" footprint
— needs only 3" dash hole (Tilt requires larger hole).• Standard 3/4" tapered steering shaft.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
COMPLETE SYSTEMSSystem components sold separately.See application and ordering guides to select appropriate components.
**The commercial helm pumps are designed with a stainless steel shaft andheavy duty shaft seal and wiper.
HYDRAULIC OUTBOARD STEERING
NOTES:These recommendations apply to factory stock outboards only. Modified installations may require a higher capacity steering system. If in doubt, contactTeleflex technical service for assistance. (Cylinder volume / helm displacement = number of turns.) For dual engines, use SeaStar or enginemanufacturer’s tie bar.For all SeaStar outboard systems: Use following option A or B:
A) Outboard hose: order standard lengths (cannot be cut to length.) Part No. 039-51XX0 / # 039-57XX0, where XX = length in feet.(See Page 50)
B) Copper tube: 3/8" diameter copper tube and Hose Kit - Part No. 037-55080.WARNING:Do NOT use SeaStar PRO helms with the unbalanced side mount cylinder. Doing so may cause steering wheel to lock up leading to possible loss ofsteering causing property damage and/or personal injury.
For more information see: www.teleflexmarine.com43
OUTBOARD STEERINGORDERING GUIDE: SIDE MOUNT SYSTEMS
OPTIONAL EQUIPMENT
SINGLE ENGINE(SINGLE CYLINDER)Applications up to 300 HP maximumNUMBER OF TURNS: 4.8/5.7
DUAL ENGINE(DUAL CYLINDER)Non-Counter-Rotating Applicationsto 600 HP max; All Counter-RotatingEngine Applications.NUMBER OF TURNS: 7
DUAL ENGINE(SINGLE CYLINDER)Non-Counter-Rotating Applicationsto 300 HP max; Counter-RotatingApplications to 600 HP maximum.NUMBER OF TURNS: 4.8/5.7
ENGINE/CYLINDER COMPONENT QUANTITYCONFIGURATION DESCRIPTION REQ’D MODEL MFR.NO. ORDER NO.
Cylinder 1 Side Mount HC 5370-3 036-53700-3Helm 1 *SeaStar 1.7 HH 5271 038-52710Hose Kit 1 Outboard Hose HO 51 xx 039-51 xx 0Oil 3 SeaStar Oil (Qt.) HA 5430 033-54300
For Extra Steering Station Add :Helm 1 *SeaStar 1.7 HH 5271 038-52710Fitting Kit 1 Add a Station HF 5501 037-55010Hose Kit 1 Outboard Hose HO 51 xx 039-51 xx 0Oil 1 SeaStar Oil (Qt.) HA 5430 033-54300xx = No. of feet required (See Page 50)
Cylinder 1 Side Mount HC 5370-3 036-53700-3Tie Bar Kit 1 Tie Bar Only HO 5009 039-50090Helm 1 *SeaStar 1.7 HH 5271 038-52710Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Oil 3 SeaStar Oil (Qt.) HA 5430 033-54300
For Extra Steering Station Add:Helm 1 *SeaStar 1.7 HH 5271 038-52710Fitting Kit 1 Add a Station HF 5501 037-55010Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Oil 1 SeaStar Oil (Qt.) HA 5430 033-54300xx = No. of feet required (See Page 50)
Cylinders 2 Side Mount HC 5370-3 036-53700-3Tie Bar Kit 1 Tie Bar Only HO 5009 039-50090Helm 1 **SeaStar 2.4 HH 5272 038-52720Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Fittings - Tee 1 Tee Fittings HF 5530 037-55300Oil 3 SeaStar Oil (Qt.) HA 5430 033-54300For Extra Steering Station Add :Helm 1 **SeaStar 2.4 HH 5272 038-52720Fitting Kit 1 Add a Station HF 5501 037-55010Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Oil 1 SeaStar Oil (Qt.) HA 5430 033-54300xx = No. of feet required (See Page 50)
Back Plate Kit (For Standard Helms) HA 5418 033-5418020º Wedge (For Standard Helms) HA 5419 033-54190Autopilot Fitting Kit (For All Helms) HF 5501 037-55010*Tilt Helm - SeaStar 1.7 HH 6541 038-65410Rear Mount Helm - SeaStar 1.7 HH 5261 038-52610**Tilt Helm - SeaStar 2.4 HH 6542 038-65420Rear Mount Helm - SeaStar 2.4 HH 5262 038-52620Power Assist Steering PA 1200-2 034-12000
HYDRAULIC OUTBOARD STEERING
For more information see: www.teleflexmarine.com44
OPTIONS
SEASTAR STEERING(SPLASHWELL MOUNTCYLINDER) SYSTEM:
A Very Economical Hydraulic Steering Alternative,SeaStar splashwell mount steering is ideal for engineswhich do not have threaded engine tilt tubes (cannot usefront or side mount cylinders). The splashwell mountcylinder typically attaches to an anchor point on or nearthe inside of the boat’s transom.
APPLICATIONS:An ideal hydraulic steering solution for engines withouttilt tubes.
Single and dual non-power-assisted outboard engines upto 300 HP (600 combined HP for counter-rotating duals).
Suitable for speeds up to 60 MPH and dual station use(with purchase of extra helm, hose & fittings). Dualengines require purchase of a tie bar kit and extrahardware. Not suitable for engines fitted with factorypower steering.
FEATURES:• Ideal for outboard engines which do not have a tilt
tube.• Design allows wide variety of mountings.• Light duty alternative to front mount cylinder where
space allows.• Suitable for installation in shallow splashwells.• 5.5/6.5 turns lock-to-lock using SeaStar 1.7 helm
(unbalanced cylinder).• Compact helm has only a 4-7/16" footprint — needs
only 3" dash hole (Tilt requires larger hole).• Standard 3/4" tapered steering shaft.• Cylinder #036-53800-3 features a compact 9" stroke for
tight applications.• Meets A.B.Y.C. standards.• Meets N.M.M.A. certification requirements.
COMPLETE SYSTEMSystem components sold separately. See application and ordering guidesto select appropriate components.
SeaStar 1.7 - Front Mount- COMMERCIAL Helm HH5217 038-52170**
SeaStar 1.7 - REAR MOUNT Helm HH5261 038-52610
SeaStar 1.7 - SPORT TILT Helm HH6191 038-61910
SeaStar 1.7 - CLASSIC TILT Helm HH6541 038-65410
Power Assist, 15' Harness PA1200-2 034-12000
SeaStar Round Bezel Kit HA5478 033-54780
SeaStar Backplate Kit HA5418 033-54180
SeaStar 20° Dash Wedge Kit HA5419 033-54190
SeaStar Bulkhead Hose Kit - 2 Hoses HO81 _ _ Special Order
SeaStar Twin Engine Tie Bar Kit HO5010 039-50100
Add-A-Station/Autopilot Fitting Kit HF5501 037-55010
COMPONENTS
DESCRIPTION Mfr. No. ORDER NO.
SeaStar 1.7 Helm HH5271 038-52710
Splashwell Mount Outboard Cylinder HC5380-3 036-53800-3
SeaStar Hose Kit - 2 HOSESSee Page 50 HO51_ _
039-51XX0XX - Length in ft.
SeaStar Oil (1 Quart) HA5430 033-54300
SeaStar Oil (1 Gallon) HA5440 033-54400
SERVICE ITEMS
**The commercial helm pumps are designed with a stainless steel shaft andheavy duty shaft seal and wiper.
HYDRAULIC OUTBOARD STEERING
45
WARNING:Do NOT use SeaStar PRO helms with the unbalancedside mount cylinder. Doing so may cause steeringwheel to lock up leading to possible loss of steeringcausing property damage and/or personal injury.
NOTES:These recommendations apply to factory stock outboards only. Modified installations may require a higher capacity steeringsystem. If in doubt, contact Teleflex technical service for assistance. (Cylinder volume / helm displacement = number of turns.)The splashwell mount cylinder can be used on all engines complying with ABYC P17/NMMA/BIA standards provided they have a threadedattachment hole (3/8"-24 UNF thread) in the steering arm. The splashwell mount cylinder - Part No. 036-53800-3 is not suitable for use onengines fitted with factory power steering. For dual engines, use SeaStar or engine manufacturer’s tie bar.
For all Seastar outboard systems: Use following option A or B:A) Outboard hose: order standard lengths (cannot be cut to length.) Part No. 039-51XX0 / # 039-57XX0,where XX = length in feet. (See Page 50)
B) Copper tube: 3/8" diameter copper tube and Hose Kit - Part No. 037-55080.
SINGLE ENGINE CYLINDER CONNECTION TO ENGINE
# 036-53800-3 SPLASHWELL CYLINDERTYPICAL SINGLE ENGINE MOUNTING
OUTBOARD STEERINGORDERING GUIDE: SPLASHWELL MOUNT SYSTEMS
SINGLE ENGINE(SINGLE CYLINDER)Applications up to 300 HP maximumNUMBER OF TURNS: 5.5/6.5
DUAL ENGINE(SINGLE CYLINDER)Non-Counter-Rotating Applications upto 300 HP maximum.Counter-Rotating Engine Applicationsup to 600 HP maximum.NUMBER OF TURNS: 5.5/6.5
For more information see: www.teleflexmarine.com
ENGINE/CYLINDER COMPONENT QUANTITYCONFIGURATION DESCRIPTION REQ’D MODEL MFR.NO. ORDER NO.
Cylinder 1 Splashwell Mount HC 5380-3 036-53800-3Helm 1 SeaStar 1.7 HH 5271 038-52710Hose Kit 1 Outboard Hose HO 51 xx 039-51 xx 0Oil 3 SeaStar Oil (Qt.) HA 5430 033-54300
For Extra Steering Station Add:Helm 1 *SeaStar 1.7 HH 5271 038-52710Fitting Kit 1 Add a Station HF 5501 037-55010Hose Kit 1 Outboard Hose HO 51 xx 039-51 xx 0Oil 1 SeaStar Oil (Qt.) HA 5430 033-54300xx = No. of feet required (See Page 50)
Cylinder 1 Splashwell Mount HC 5380-3 036-53800-3Tie Bar Kit 1 Tie Bar Only HO 5010 039-50100Helm 1 *SeaStar 1.7 HH 5271 038-52710Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Oil 3 SeaStar Oil (Qt.) HA 5430 033-54300
For Extra Steering Station Add:Helm 1 *SeaStar 1.7 HH 5271 038-52710Fitting Kit 1 Add a Station HF 5501 037-55010Hose Kit 1 Outboard Hose HO 51xx 039-51 xx 0Oil 1 SeaStar Oil (Qt.) HA 5430 033-54300xx = No. of feet required (See Page 50)
OPTIONAL EQUIPMENT Back Plate Kit (For Standard Helms) HA 5418 033-5418020º Wedge (For Standard Helms) HA 5419 033-54190Autopilot Fitting Kit (For All Helms) HF 5501 037-55010
*Tilt Helm - SeaStar 1.7 HH 6541 038-65410Rear Mount Helm - SeaStar 1.7 HH 5261 038-52610Power Assist Steering PA 1200-2 034-12000
HYDRAULIC OUTBOARD STEERING
NUMBER OF TURNS LOCK TO LOCKCYLINDER DESCRIPTION
ENGINE MANUFACTURER COMPONENT DESCRIPTION QTY.REQ’D MODEL ORDER NO.SINGLE & DUAL STERNDRIVES CYLINDER 1 SEE APPLICATION GUIDE
HELM 1 *SEASTAR 1.7 (See Note 1) 038-52710HELM (OPTIONAL) **SEASTAR 2.4 (See Note 2) 038-52720OIL 3 SEASTAR OIL 033-54300TUBE/HOSE (See Note 3)
FOR EXTRA STEERING STATION ADD:HELM 1 * SEASTAR 1.7 (See Note 1) 038-52710
**SEASTAR 2.4 (See Note 2) 038-52720FITTING KIT 1 ADD A STATION
- FOR SEASTAR 1.7 HELMS 037-55020- FOR SEASTAR 2.4 HELMS 037-55010
OIL 1 SEASTAR OIL 033-54300EXTRA TUBE/HOSE (See Note 3)
OPTIONAL EQUIPMENT BACK PLATE KIT (FOR FRONT MOUNT HELMS) 033-5418020 DEGREE WEDGE KIT (FOR FRONT MOUNT HELMS) 033-54190AUTOPILOT FITTING KIT (FOR ALL HELMS) 037-55020*TILT HELM - SEASTAR 1.7 See Page 48REAR MOUNT HELM - SEASTAR 1.7 038-52610TILT HELM - SEASTAR 2.4 038-65420REAR MOUNT HELM - SEASTAR 2.4 038-52620POWER ASSIST STEERING 034-12000
For more information see: www.teleflexmarine.com46
STERNDRIVE STEERING Application Guide
NOTES: These recommendations apply to factory stock sterndrives only. Modified installations may require a higher capacity steering system.If in doubt, contact our technical service for assistance.
1. SeaStar 1.7 helms are recommended for both non-power & power steered applications.2. SeaStar 2.4 helms can be specified for power steered applications in which faster steering response is desired. Review the Application Guide on the previous page for recommendations.3. *For SeaStar 1.7 systems: Use 3/8'" diameter nylon tubing. (Part No. 041-51011, per ft.) **For SeaStar 2.4 systems: Use following option A or B:
A) Outboard hose: must be ordered in standard lengths. (Cannot be cut to length) ORB) Copper tube 3/8" diameter copper tube and hose kit part No. 037-55080
4. For dual sterndrives - Use engine manufacturers supplied tie bar.
(Number of Terms varies byhelm & cylinder.See Application guide.)For Dual Sterndrive applicationsSee Note 4
Teleflex Marine recommends that all steering applications are validated by a qualified Teleflex dealer/installer.NOTES:
1. Balanced system - number of steering wheel turns lock-to-lock is equal port to starboard or vice-versa.2. Unbalanced system - number of steering wheel turns lock-to-lock is unequal port to starboard or vice-versa.3. Requires cylinder rod end adapter 033-54240 from Teleflex Canada. Refer to the 036-53260-3 cylinder diagram in this section.4. 036-53320-3 replaces 036-53260-3 as of January 2000. If installing 036-53260-3 additional clevis supplied by engine manufacturer required (part number B98735A1).5. The installation of the 036-53320-3 sterndrive cylinder requires the use of SeaStar Outboard hose only. Do not use 3/8” copper or nylon tube.6. If engine outdrive is NOT equipped with a torque tab on the underside of the lower leg one must be installed to reduce prop torque.7. Yanmar Engines using the Bravo III drives require the use of cylinder 036-53260-3.
Engine Manufacturer
BMW
MERCRUISER
OMC
VOLVO
YAMAHA
Steering Configuration
NON POWER ASSISTPOWER ASSISTNON POWER ASSISTNON POWER ASSISTNON POWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTNON POWER ASSISTNON POWER ASSISTNON POWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTNON POWER ASSISTNON POWER ASSISTNON POWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTPOWER ASSISTNON POWER ASSISTPOWER ASSIST
Engine/Drive/Model
ALLALLMERCRUISER IALPHA IBRAVO I, II, IIIMERCRUISER IALPHA IBRAVO I, IIBRAVO III400/800 SeriesCOBRAKING COBRA400/800 SeriesCOBRAKING COBRA275280, 290DIESEL275280, 290DIESEL32, DIESEL41-42, DIESELDPS & SXALLALL
Year
To DateTo Date1983 & Prior1984 to Date1984 to DateTo 19831984 to Date1984 to Date1984 to Date1985 & Prior1986 to Date1986 to Date1985 & Prior1986 to Date1986 to DateTo DateTo DateTo DateTo DateTo DateTo Date1997 to Date1992 to Date1996 to Date1989 to Date1989 to Date
Model No.
BA125-8EMV125-8EMBA125-8EMVBA135-7EMBA135-7EM125-8EM125-8EM125-8EM125-8EMN/ABA150-7EMBA150-7EMN/A125-8EM125-8EMBA150-7ATMBA135-7EMBA135-7EMN/A125-8EM125-8VEM92-VPS92-VPS92-VPSN/A125-8EM
ORDER NO.
036-53300-3036-53280-3036-53300-3036-53320036-53320036-53320036-53280-3036-53280-3036-53280-3N/A036-53260-3036-53260-3N/A036-53280-3036-53280-3036-53140-3036-53320036-53320N/A036-53280-3036-53290-3036-53310-3036-53310-3036-53310-3N/A036-53280-3
SStar I Helm038-527104.94.9/5.84.95.05.04.9/5.84.9/5.84.9/5.84.9/5.8N/A6.06.0N/A4.9/5.84.9/5.86.05.05.0N/A4.8/5.84.9/5.84.8/5.54.8/5.84.9/5.5N/A4.9/5.8
SStar II Helm038-52720N/A3.4/4.1N/A3.53.53.4/4.13.4/4.13.4/4.13.4/4.1N/AN/AN/AN/A3.4/4.13.4/4.1N/A3.53.5N/A3.4/4.13.4/4.13.4/4.13.4/4.13.4/4.1N/A3.4/4.1
Notes
121, 61, 4, 5, 61, 4, 5, 62222, 7-1, 31, 3-221, 61, 4, 5, 61, 4, 5, 6-22222
2
STERNDRIVE STEERING ORDER GUIDE (Cylinder Volume ÷ Helm Displacement = # Of Turns)
HYDRAULIC STERNDRIVE STEERING
PLANING HULL DISPLACEMENT HULL SAIL
COMPONENT QUANTITY MODEL ORDER NO.DESCRIPTION REQUIRED
SYSTEM 1 (4 TURNS LOCK-TO-LOCK)HELM 1 *SEASTAR 1.7 038-52710CYLINDER 1 BA125-7ATM 036-53120-3OIL 3 SEASTAR OIL 033-54300TUBE 3/8'' DIA. NYLON (NOTE 1&3) 041-51011 per ftFor Extra Steering Station, Add:HELM 1 *SEASTAR 1.7 038-52710FITTING KIT 1 ADD A STATION 037-55020OIL 1 SEASTAR OIL 033-54300EXTRA TUBE 3/8" DIA. NYLON (NOTE 1&3) 041-51011 per ftSYSTEM 2 (5 TURNS LOCK-TO-LOCK)HELM 1 *SEASTAR 1.7 038-52710CYLINDER 1 BA135-7ATM 036-53130-3OIL 3 SEASTAR OIL 033-54300TUBE 3/8'' DIA. NYLON (NOTE 1&3) 041-51011 per ftFor Extra Steering Station, Add:HELM 1 *SEASTAR 1.7 038-52710FITTING KIT 1 ADD A STATION 037-55020OIL 1 SEASTAR OIL 033-54300EXTRA TUBE 3/8'' DIA. NYLON (NOTE 1&3) 041-51011 per ft
SYSTEM 3 (6 TURNS LOCK-TO-LOCK)HELM 1 *SEASTAR 1.7 038-52710CYLINDER 1 BA150-7ATM 036-53140-3OIL 3 SEASTAR OIL 033-54300TUBE 3/8'' DIA. NYLON (NOTE 1&3) 041-51011per ftFor Extra Steering Station, Add:HELM 1 *SEASTAR 1.7 038-52710FITTING KIT 1 ADD A STATION 037-55020OIL 1 SEASTAR OIL 033-54300EXTRA TUBE 3/8'' DIA. NYLON (NOTE 1&3) 041-51011 per ft
COMPONENT QUANTITY MODEL ORDER NO.DESCRIPTION REQUIRED
SYSTEM 4 (4-1/4 TURNS LOCK-TO-LOCK)HELM 1 **SEASTAR 2.4 038-52720CYLINDER 1 BA150-7TM 036-53180OIL 3 SEASTAR OIL 033-54300HOSE KIT 1 HOSE KIT 037-55080COPPER TUBE 3/8" DIA. COPPER (Note 2 &3)For Extra Steering Station, Add:HELM 1 **SEASTAR 2.4 038-52720FITTING KIT 1 ADD A STATION 037-55020OIL 1 SEASTAR OIL 033-54300EXTRA TUBE 3/8" DIA. COPPER (Note 2 &3)
SYSTEM 5 (5-1/2 TURNS LOCK-TO-LOCK)HELM 1 **SEASTAR 2.4 038-52720CYLINDER 1 BA175-7TM 036-53190OIL 3 SEASTAR OIL 033-54300HOSE KIT 1 HOSE KIT 037-55080COPPER TUBE 3/8" DIA. COPPER (Note 2 &3)For Extra Steering Station, Add:HELM 1 **SEASTAR 2.4 038-52720FITTING KIT 1 ADD A STATION 037-55020OIL 1 SEASTAR OIL 033-54300EXTRA TUBE 3/8" DIA. COPPER (Note 2 &3)
OPTIONAL EQUIPMENTBACK PLATE KIT (FOR STANDARD HELMS) 033-5418020 DEGREE WEDGE KIT (FOR STANDARD HELMS) 033-54190AUTOPILOT FITTING KIT (FOR ALL HELMS) 037-55020* TILT HELM - SEASTAR 1.7 038-65410REAR MOUNT HELM - SEASTAR 1.7 038-52610
** TILT HELM - SEASTAR 2.4 038-65420REAR MOUNT HELM - SEASTAR 2.4 038-52620POWER ASSIST STEERING 034-12000
47
SEASTAR INBOARD STEERINGSeaStar has 2 types of inboard steering:SeaStar (with SeaStar 1.7, 2.0 or 2.4 helm) and SeaStar Capilano (withCapilano 1250V or 1275V variable turn helm).
SeaStar systems are described on this page and the next.
Features• Regular duty aluminum or heavy duty brass cylinders.• Easy installation for single and dual rudder vessels.• Cylinders supplied with bleeder fittings.• Two axis articulation.Applications• Most inboard powered boats with single or twin engines.• Single Engine Planing/Displacement Hull Craft from 26-44 feet.• Twin Engine Planing Hull Craft from 26-50 feet.• Twin Engine Displacement Hull & Sail Craft from 26-44 feet.
HOW TO SELECT AN INBOARD STEERING SYSTEM1) From the application guide select the System Number appropriatefor the vessel based on:a) Hull type - displacement or planing; b) Length of vessel;c) Number of rudders; and d) Usage of vessel.
2) From the order guide select the appropriate helm and accessoryhardware for each steering station.
3) From the order guide select the fitting and hose kits required.4) Confirm that you have sufficient space available where the cylinderwill be mounted and at the dash for the helm, etc.
Displacement Hull - Maximum hull speed does not normallyexceed 18 knots.
Planing Hull - Maximum hull speed normally exceeds 18 knots.
NOTES:1. For systems 1, 2 & 3, nylon tubing (3/8" diameter) is the standard requirement for plumbing the system. Copper tubing (3/8" diameter) can be substituted butFitting Kit 037-55070 is required.
2. For systems 4 & 5, copper tubing (3/8" diameter) is the standard requirement for plumbing the system. Fitting Kit 037-55080 is required.3. For systems 1-5 SeaStar outboard hose can be substituted for nylon or copper tube. These hoses must be ordered in standard lengths.They cannot be cut to length.
SEASTAR INBOARD STEERING Order Guide
Inboard Cylinder P/N HC531 (ATM or TM)
HYDRAULIC INBOARD STEERING
BOAT LENGTHUp To
SINGLE ENGINE TWIN ENGINE SINGLE ENGINE TWIN ENGINE SINGLE ENGINE
Pleasure Work Pleasure Work Pleasure Work Pleasure Work Pleasure Work26 Ft. (8m) 1 4 1 4 1 4 1 4 1 432 Ft. (10m) 2 4 1 4 2 4 2 4 2 438 Ft. (11.5m) 3 5 2 5 3 5 3 5 3 544 Ft. (13.5m) 5 - 3 5 5 - 5 - 5 -50 Ft. (15m) - - 5 - 5
SEASTAR INBOARD STEERING Application Guide
HELM HELM SERVICE KITDESCRIPTION MFR. N0./ORDER NO. MFR. N0./ORDER NO.
SEASTAR 1.7 - FRONT MOUNT HH5271 / 038-52710 HP6032 / 037-60320SEASTAR 1.7 - FRONT MT. COMM. HH5217 / 038-52170 HP6032 / 037-60320SEASTAR 1.7 - REAR MOUNT HH5261 / 038-52610 HP6032 / 037-60320SEASTAR 1.7 - SPORT TILT* HH6191 / 038-61910 HP6032 / 037-60320SEASTAR 1.7 - CLASSIC TILT* HH6541 / 038-65410 HP6032 / 037-60320SEASTAR 1.7 - SPORT PLUS TILT* HH6491 / 038-64910 HP6032 / 037-60320
SEASTAR 2.0 - FRONT MOUNT HH5273 / 038-52730 HP6032 / 037-60320
SEASTAR 2.4 - FRONT MOUNT HH5272 / 038-52720 HP6032 / 037-60320SEASTAR 2.4 - FRONT MT. COMM. HH5224 / 038-52240 HP6032 / 037-60320SEASTAR 2.4 - REAR MOUNT HH5262 / 038-52620 HP6032 / 037-60320SEASTAR 2.4 - SPORT TILT* HH6192 / 038-61920 HP6032 / 037-60320SEASTAR 2.4 - CLASSIC TILT* HH6542 / 038-65420 HP6032 / 037-60320
Unmatched comfort and control only with SeaStar Steering. The world’s most popular hydraulicsteering system – offering smooth, efficient No Feedback Steering for single and multi-outboardengines up to 350HP (700HP combined for counter rotating twins) for speeds up to 60 MPH.
HELM HELM SERVICE KITDESCRIPTION MFR. N0./ORDER NO. MFR. N0./ORDER NO.
BAYSTAR 1.1 - FRONT MOUNT HH4311 / 038-43110 HP6032 / 037-60320BAYSTAR 1.4 - FRONT MOUNT HH4314 / 038-43140 HP6032 / 037-60320BAYSTAR 1.4 - SPORT TILT HH4315 / 038-43150 HP6032 / 037-60320
BayStar hydraulic steering is brought to you by the manufacturers of SeaStar®, the most trustedname in pleasure boat steering.BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto yourboats rated to a MAXIMUM of 150 HP (total). Combine this with a superior design rigid ISO qualitycontrol and the finest materials and precision manufacturing — BayStar continues the traditionbringing comfort and safety to boating.
48
SEASTAR PRO HELMS
HH4314
BAYSTAR HELMS
SEASTAR HELMS
Designed for the performanceboater, SeaStar Pro is theultimate steering system forhigh-speed single engineoutboards. As the premierTeleflex Marine No FeedbackSystem, SeaStar Pro deliversuncompromising steeringcontrol! Suited for all thosecritical high speed outboardpowered boat applications likeBass, Flats, Combo Race and Ski,and other performance boatscapable of speeds in excess of60 MPH. SeaStar PRO hassteered the Bass Masters since1994 and it's the choice of highperformance outboard boatbuilders.
HELM HELM SERVICE KITDESCRIPTION MFR. N0./ORDER NO. MFR. N0./ORDER NO.
SEASTAR PRO 1.7 - FRONT MOUNT HH5779 / 038-57790 HP6032 / 037-60320
SEASTAR PRO 2.0 - FRONT MOUNT HH5770 / 038-57700 HP6032 / 037-60320SEASTAR PRO 2.0 - SPORT TILT* HH6190 / 038-61900 HP6032 / 037-60320SEASTAR PRO 2.0 - CLASSIC TILT* HH6574 / 038-65740 HP6032 / 037-60320
SEASTAR PRO 2.4 - FRONT MOUNT HH5772 / 038-57720 03HP6032 /037-60320
HH5770
HH5271
HYDRAULIC STEERING HELMS
SEASTAR FRONT MOUNTOUTBOARD CYLINDERSSeaStar Outboard Hydraulic Steering offers three models of steeringcylinders to suit most applications. The standard and most commonlyused model is the Front Mount Steering Cylinder HC5345/47/48/58. Beforeordering it is necessary to determine the best possible application for yourboat, taking into account the hull design, speed and usage of the boat.Keep in mind that engines today have become larger, more powerful andheavier than in the past.
HYDRAULIC STEERING CYLINDERSBAYSTAR OUTBOARD CYLINDERSThis balanced cylinder features a compact design that fits mostsplashwells. BayStar allows you to install all of the safety, reliability andcomfort of hydraulic steering onto your boats rated up to MAX. 150HP(Total). Combine this with the superior design, rigid ISO quality controland teamed with the finest materials and precision manufacturing—BayStar continues the tradition bringing comfort and safety to boating.NOTE: Mercury Optimax should use SeaStar cylinders
SEASTAR PRO FRONT MOUNTOUTBOARD CYLINDERSThe SeaStar Pro Front Mount Outboard Cylinders have keyed supportbrackets to prevent racking of the cylinder which gives it a more solid feeland more robust bushings.
SeaStar PRO Outboard cylinders are suited for all those critical highspeed, single powered outboard boats, like Bass, Flats, combo Race/Skiand other performance orientated boats capable of speeds in excess of65mph. All SeaStar PRO systems require the use of a SeaStar PRO helmand SeaStar PRO (1500psi) reinforced Kevlar hoses only!
SEASTAR SPLASHWELL MOUNTOUTBOARD CYLINDERSThis cylinder is a light duty alternative to front & side mountcylinders. It is unbalanced with 5.5/6.5 turns lock to lock and fitsengines with/without support (steering) tube. The splashwell mountcylinder is for single & multiple engine capability and has total powerto 600 HP in counter rotating application. It can be transom orhull mounted cylinder.NOTE: Not for use with
SeaStar Pro helms.
SEASTAR SIDE MOUNTOUTBOARD CYLINDERSThis cylinder is suitable for installation in shallow splashwells and use onengines fitted with power steering. This unbalanced cylinder is 4.8/5.7 turnslock to lock. Typical applications include centre console fishboats and cruisers.For single and multiple outboard engine installations with total power to 600 HPin counter rotating application.NOTE: Not for use with SeaStar Pro helms.
SEASTAR STERNDRIVE CYLINDERSThis cylinder fits most most power and nonpower assist sterndrives.It can be used on single and multiple drives with multiple steeringstation connection. This cylinder features simple autopilot interface.
For more information see: www.teleflexmarine.com49
DESCRIPTION CYLINDER NUMBER
Outboard FM PP Cylinder HC5345 / 036-53450O/B FM PP Cylinder (115-130HP Honda) HC5347 / 036-53470O/B FM PP Cylinder (‘77-’90 OMC) HC5348 / 036-53480O/B FM PP Cylinder (225HP 4-Stroke Yam.) HC5358 / 036-53580Outboard Cylinder Kit, Front Mount HC5342 / 036-53420
DESCRIPTION CYLINDER NUMBER
Outboard PRO FM PP Cylinder HC6345 / 036-63450O/B PRO FM PP Cylinder (Yamaha) HC6358 / 036-63580
DESCRIPTION CYLINDER NUMBER
Outboard Compact Cylinder HC4645H / 036-46450Outboard Compact Cylinder - Honda HC4647H / 036-46470Outboard Compact Cylinder - short plate HC4648H / 036-46480Outboard Compact Cylinder - Yamaha HC4658H / 036-46580
DESCRIPTION CYLINDER NUMBER
O/B Cylinder Kit, Side Mount, Unbalanced HC5370-3 / 036-53700-3
DESCRIPTION CYLINDER NUMBER
SeaStar Cylinder, BA 125 ATM,I/B Type HC5312-3 / 036-53120-3SeaStar Cylinder, BA 135 ATM,I/B Type HC5313-3 / 036-53130-3SeaStar Cylinder, BA 150 ATM,I/B Type HC5314-3 / 036-53140-3SeaStar Cylinder, BA 150 7TM,I/B Type HC5318 / 036-53180SeaStar Cylinder, BA 175 7TM,I/B Type HC5319 / 036-53190
DESCRIPTION CYLINDER NUMBER
SeaStar Cylinder, BA 150-7EM, S/DType HC5326-3 / 036-53260-3SeaStar Cylinder, 125-8VEM HC5329-3 / 036-53290-3SeaStar Cylinder, 125-8EM HC5328-3 / 036-53280-3SeaStar Cylinder, BA 125-8EMV, S/DType HC5330-3 / 036-53300-3SeaStar Cylinder, I/O Model 92VPS HC5331-3 / 036-53310-3SeaStar Cylinder, S/D (Mercruiser & HC5332 / 036-53320
Volvo SX nonPA)
DESCRIPTION CYLINDER NUMBER
O/B Splashwell Mount Cylinder HC5380-3 / 036-53800-3
SEASTAR INBOARD CYLINDERSThese cylinders are for single and dual rudder vessels with two axis articulationand easy autopilot interface. Cylinders are also supplied with bleeder fittings.The cylinders HC53XX-3 are redesigned cylinders with the following features:- All anodized aluminum construction- Adjustable o-ring sealed ports- Common components(i.e. end glands, pistons, seals)
HYDRAULIC STEERING - CYLINDERS
Can be used with SeaStar 1.7 helms on stern drives (except with HC5332 cylinder) and small inboardswith fitting kit; do not use on outboard systems.NOTE: SeaStar 3/8" nylon tubing is not recommended for use in systems with SeaStar IIhelms or SeaStar HP helms. It is also not recommended for use in SeaStar I systems where the total length of tubing runexceeds 100 feet. In these cases outboard hose or 3/8" copper tubing must be used.
HYDRAULIC HOSE / TUBING1) OUTBOARD HOSE KITS2) NYLON TUBING3) COPPER TUBING
For OutboardsFor Baystar System. Use BayStar hydraulic tubing (see below)
*For Seastar 1.7 systems: Use SeaStar hydraulic hose # 039-51 xx 0or SeaStar Pro hydraulic hose # 039-57 xx 0 Outboard hose must beordered in standard lengths.(Cannot be cut to length. xx = length of hose. See chart.)
*For SeaStar 2.0 & 2.4 & SeaStar PRO systems:Use SeaStar Pro hose # 039-57 xx 0 or 3/8'' dia. copper tubing +hose kit # 037-55080. SeaStar outboard hose kits are recommended.(xx = Length of hose. See chart).
For Stern Drives*For SeaStar 1.7 systems: Use SeaStar hydraulic hose # 039-51 xx 0 orSeaStar Pro hydraulic hose # 039-57 xx 0 or 3/8" dia. nylon tubing# 041-51011 (per ft.). (xx = Length of hose).
*For SeaStar 2.0 & 2.4 systems: Use SeaStar hydraulic hose # 039-51 xx 0 orSeaStar Pro hose # 039-57 xx 0 or 3/8" dia. copper tubing + hose kit# 037-55080. (xx = Length of hose).For InboardsSeaStar systems:For systems 1, 2 & 3 (See Page 47) 3/8" dia. nylon tubing # 041-51011 (per ft.)is standard requirement for plumbing the system. Copper Tubing (3/8" diameter)can be substituted but Fitting Kit # 037-55070 is required.For systems 4 & 5 Copper Tubing (3/8" diameter) is the standard requirementfor plumbing the system. Fitting Kit # 037-55080 is required.For systems 1-5 SeaStar outboard hose # 039-51 xx 0 or # 039-57 xx 0can be substituted for nylon or copper tube. (xx = length of hose) (see Chart)
ORDER NO. Length
039-51020 2-ft. / 0.6M
039-51030 3-ft. / 0.9M
039-51040 4-ft. / 1.22M
039-51080 8-ft. / 2.44M
039-51100 10-ft. / 3.05M
039-51120 12-ft. / 3.66M
039-51140 14-ft. / 4.27M
ORDER NO. Length
039-51160 16-ft. / 4.88M
039-51180 18-ft. / 5.49M
039-51200 20-ft. / 6.10M
039-51220 22-ft. / 6.71M
039-51240 24-ft. / 7.32M
039-51300 30-ft. / 9.14M
039-51340 34-ft. / 10.36M
SEASTAR PRO OUTBOARD HOSE KIT (HO 57XX)
BAYSTAR TUBING KITSCan be used with all BayStar helms, withappropriate fittings. Kit contains two cutlengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)
NYLON TUBING (HT 5 XXX)3/8" O.D. (outside diameter)ORDER NO. 041-51011 (per ft.)
3/8" outside diameter copper tubing is recommended for inboard, stern driveand seadrive steering systems with SeaStar II (2.4 cu.in/rev displacement)helms only, or where the length run exceeds 100 ft. Additional SeaStar hose kit# 037-55080 is required to connect the tubing to the cylinder.NOTE: 3/8" copper tubing should be obtained through a local vendorSPECIFICATION: Annealed Copper Refrigeration Tubing / 0.032 wall thickness
/ 3/8" outside diameter.
NOTE: Each OUTBOARD HOSE KIT contains (2) Hoses of equal length.Hose Kits are available in lengths from 2' to 40' from Teleflex.If not indicated on above chart a special order can be placed.
Typical Single Station Routing
3. COPPER TUBING
SEASTAR OUTBOARD HOSE KIT(HO 51XX)Includes two hoses - can be used with allSeaStar systems, except SeaStar PRO,BayStar, Capilano and 3-line inboard systems.
DESCRIPTION ORDER NO. Mfr. No.
20' kit (2 x 20' lengths tubing): 039-44250 HT4420H
30' kit (2 x 30' lengths tubing): 041-44300 HT4430H
Includes two hoses - can be usedwith all SeaStar systems, except BayStar,Capilano and 3-line inboard systems.
These Kevlar® hoses have a lowervolumetric expansion rate thanSeaStar hoses.Use of nylon tubing is not recommendedwith SeaStar PRO systems.
2. HYDRAULIC TUBING
Seastar Steering HoseTypical End Detail
A single, front-mount outboard cylinder system is shown in this diagram.If your hydraulic system is different than the one depicted and/or you haveany questions about hydraulic steering after reviewing this catalogue,please contact our technical department.
HOW TO DETERMINE HOSE/TUBING LENGTHSelect the situation which best suits your application, noting:a) Cylinder locationb) Number of cylindersc) Type of cylindersd) Number of steering stationse) The number of hose and fitting kits required
Then define the hose/tubing lengths and fitting kits required:1) Note the number of hose and fitting kits required.2) Measure along the intended path of the hose/tube routing for each of therequired hose kits.a) Measure from centre of the cylinder(s) and helm(s).b) Some installations require more than 1 hose kit and additional fitting kits.c) Minimum bend radius for outboard hose is 2-1/2" (6 cm).d) Outboard cylinders move. They are subject to engine trim & tilt; enoughslack must be left in hoses to prevent kinking.
e) Systems using copper tubing require installation of flexible cylinder hosebetween the cylinder and the copper tubing.
3) Round the measurement up to the next even digit and add 2 feet (0.6m).This is the length of the hose/tubing required.
(See also Outboard, Stern Drive & Inboard Steering Sections of this cataloguefor part number and application information.)
1. OUTBOARD HOSE KITS
NOTE: Outboard hoses are supplied with pre-attached hose fittings on bothends. In order to prevent hose kinking, bend restrictors are supplied on oneend of each hose in the kit. The end of the hose with the bend restrictor is tobe attached to the cylinder.
ORDER NO. Length
039-57140 14-ft. / 4.27M
039-57160 16-ft. / 4.88M
039-57180 18-ft. / 5.49M
039-57200 20-ft. / 6.10M
039-57220 22-ft. / 6.71M
50
HYDRAULIC STEERING - HOSE/TUBING
HP6036 / ORD. # 037-60360Spacer kitfor O/B front mount cylinder
HP6033 / ORD. # 037-60330Mounting hardware forO/B pivot plate cylinder
VENT PLUG
• For use with SeaStar helms•Must be used on helm pump on singlesteering station systems•Must be used on upper-most helm pump onlyon multi-steering station systems• Colour: Black Cap-Silver Threads
ORDER NO. Mfr. No. Description033-61260 HP 6126 Vented 5Pk.
1 Litre Bottle.ORDER NO. 033-543004 Litre Bottle.ORDER NO. 033-54400
NOTE: SeaStar hydraulic steering systems require the useof a special high quality hydraulic fluid meetingMIL SPEC H-5606C.Alternate recommended hydraulic fluids forSeaStar Steering Systems.
OIL MANUFACTURER BRAND NAMESeaStar SeaStar Oil # HA 5430Shell Aero Shell Fluid #4Esso Univis N15 or J13Texaco HO 15Chevron Aviation Hydraulic Fluid AMobil Aero HFAPetro Canada Harmony HV115 (In Canada Only)
FILLER PLUGS
•Must be used on all helm pumps other thanupper-most helm pump on multi-steeringstation systems.• This non-vent plug is supplied withadditional station fitting kit no. 037-55010and 037-55020.• Colour: Black Cap-Silver Threads
ORDER NO. Mfr. No. Description033-54320 HA 5432 Non-Vented
HYDRAULIC STEERING HARDWARE KITS
HP6019 / ORD. # 037-60190Ball Joint rod end, 3/4” NF. SST.
HP6013 / ORD. # 037-60130Ball Joint rod end, 5/8" SST.
HP6032 / ORD. # 037-60320Service Kit for SeaStar Helms
HP6037 / ORD. # 037-60370Service kitfor SeaStar commercial helms
HP6052 / ORD. # 037-60520Bezel, for tilt helms
HP6064 /ORD. # 037-60640Relief Valve950PSI, for RV60
NON-VENT PLUG
CAUTION: Substitution of non-recommended fluids may result in heavier steering and/orirreparable damage to your steering system.
FILLER KITSEASTAR HYDRAULIC OIL
For SeaStar & Syten HelmsFiller Kit with Screw-On CAP
to fit Oil BottleORDER NO. 033-54380
For more information see: www.teleflexmarine.com51
SEASTAR HYDRAULIC OIL, FILLER KITS, FILLER PLUGS & FITTINGS
SEASTAR HYDRAULIC STEERING - OIL, HARDWARE KITS
(2) per kit
HF5519 / ORD. # 037-55190Bleed Tee (TM Cylinders)
(2) per kit
HF5518 / ORD. # 037-55180Vertical Bleeder Tee
HP6031 / ORD. # 037-60310Mounting Hardware and slide platefor O/B cylinder
All SeaStar Manual Hydraulicsteering systems utilize thesame style of fittings for allapplications.
These are 3/8" compressionfittings which utilize a 9/16" - 24extra fine thread.
(2) per kit
HF5528 / ORD. # 037-55200Horizontal Bleeder Tee
(2) per kitIncludes O-ring. For use withFront Mount Cylinder ONLY.
HF5548 / ORD. # 037-55480Bleed Nipple
(3) per kit
HF5527 / ORD. # 037-55270Union Coupling Fitting
(3) per kit
HF5528 / ORD. # 037-55280Straight Fitting
(3) per kit
HF5538 / ORD. # 037-55380Street Elbow
(3) per kit
HF5532 / ORD. # 037-55320Connector Fitting
(3) per kit
HF5529 / ORD. # 037-55290Elbow Fitting
(3) per kit
HF5533 / ORD. # 037-55330Tee Fitting
(3) per kit
HF5534 / ORD. # 037-55340Elbow Fitting
(2) per kit
HF5540 / ORD. # 037-5540045° Fitting
(3) per kit
HF5536 / ORD. # 037-55360Tee Fitting
(3) per kit
HF5531 / ORD. # 037-55310Tee Fitting
(3) per kit
HF5524 / ORD. # 037-55240Cap Plug Nut
(3) per kit
HF5530 / ORD. # 037-55300Tee Fitting
(6) per kitFor use with 3/8" Nylonand/ or3/8" copper tubing
HF5526 /ORD. # 037-55260Tube Nut
(2) per kit.
HF5566 / ORD. # 037-55660Adapter Fitting
(2) per kit3/8" NPT Male to 1/4" NPT Female
HF5535 / ORD. # 037-55350Reducer Fitting
HP5607 / ORD. # 037-56070Gland KitBayStar cylinder HP5607 port side
HP4600 / ORD. # 037-46000Gland KitBayStar compact cylinder
HYDRAULIC STEERING FITTINGS & HARDWARE KITS
(2) per kit
HF5521 / ORD. # 037-55210Vertical Bleeder Tee
52
TWIN ENGINE2- CYLINDERTIE BAR KIT
HYDRAULIC STEERING FITTINGS & HARDWARE KITS
For more information see: www.teleflexmarine.com53
SEASTAR SERVICE PARTS
HS5157 (B, C, D)
HF5548 (E)
HF6145 (F)
HF5521HF5520
Replacement shaft seal only for 1990-date SeaStar 1.7 (I), 2.0,2.4 (II), SeaStar Pro & SeaStar P.S. helms.For both front and rear mount helms.ORDER NO. Mfr. No. Description034-51760 HS5176 Helm Seal Kit
Comes with every SeaStar helm. Must be used in all single steeringstation systems or on uppermost helm in multiple steering stations.ORDER NO. Mfr. No. Description033-61260 HP6126 Vented Fill Plug (5 PK)
For use on lower station in multi-station systems only.Included with kits HF5501 and HF5502.ORDER NO. Mfr. No. Description033-54320 HA5432 Non-Vented Fill Plug
Contains fittings for adding either a steering station or an autopilotsystem to an existing SeaStar outboard steering system. Includes 25feet of SeaStar 3/8" nylon tubing and non-vented fill plug for helm atupper most station.ORDER NO. Mfr. No. Description037-55010 HF5501 Outboard Add-A-Station
/Auto Pilot Kit
ORDER NO. Mfr. No. Description034-51570 HS5157 Front Mount Cylinder Seal KitReplacement front seal kit for SeaStar front mount cylindersexcept PRO models.(HC5345/HC5347/HC5348/HC5358/HC5343/HC5340/HC5342/HC5365).Includes 2 seal glands, pin wrench and guide tool.
Available separately:Seal Gland (Mfr. No.724124),Seal Gland Assembly Guide Tool (Mfr .No. 745920),Pin Wrench (Mfr. No.745525).(Includes items B, C & D in illustration.)
ORDER NO. Mfr. No. Description037-61450 HF6145 Front Mount Cylinder
Elbow FittingElbow fitting for HC5345/HC5347/HC5348/HC5358 SeaStar front mountcylinder. (Item F in illustration.)
ORDER NO. Description037-55480 Front Mount Cylinder Bleed Fitting2 Bleed fittings, 2 O-rings and 2 soft caps forHC5345/HC5347/HC5348/HC5358. SeaStar front mount cylinders.(Item E in illustration, caps not shown.)
ORDER NO. Description037-55200 Cylinder Bleeder Tee Fitting SetPair of bleeder tee fittings for older-style standard and compact SeaStarfront mount cylinders (HC5342/HC5340/HC5365), side mount cylinders(HC5370-3), and splashwell mount cylinders (HC5380-3).
ORDER NO. Description037-55210 Vertical Bleeder Fitting SetPair of 90-degree fittings with integrated vertical bleeders foruse where clearances are tight.
HF5501
CYLINDER PARTS
HELM PARTS, FITTINGS
SERVICE KIT-SEASTAR HELMS HP6032 (A)ORDER NO. 037-60320
HA5432
HP6126
HYDRAULIC STEERING PARTS & FITTINGS
Part numbers NOT catalogued, but are in stock or superceded.
ORDER NO. Mfr. No. Description
033-54240 HA5424 Cylinder Rod End Adapter
033-54250 HA5425 Adapter Mount
033-54500 HA5450 Fill Vent Plug Kit
036-53420 HC5342 Cylinder – Front Mount(Alt. No. 036-53450)
037-55120 HF5512 Bulkhead Fitting Kit – ¾" max.,Single cylinder
037-55130 HF5513 Bulkhead Fitting Kit – 3",Max. Single cylinder
037-55140 HF5514 Bulkhead Fitting Kit – ¾" max.,Twin cylinder
037-55150 HF5515 Bulkhead Fitting Kit – 3",Max. Twin cylinder
037-60230 HF6023 Elbow Fitting, 4-Pack
037-60240 HF6024 Tube Fitting to T-Flare 44-6, 3-Pack
037-60250 HF6025 Connector Fitting, 3-Pack
038-52750 HH5275 Capilano Helm Pump – (1275V)
039-50390 HO5039 Single Engine Adapter Plate Kit- Yamaha 1989-Date, 70 HP
039-50470 HO5047A Twin Engine Adapter Plate Kit- Yamaha
039-53630 HO5363 Slide Plate Kit – Suzuki
039-53660 HO5366 Slide Plate Kit – Yamaha
039-53670 HO5367 Slide Plate Kit – Mercury/Mariner
039-53680 HO5368 Slide Plate Kit – Johnson/Evinrude
039-53690 HO5369 Slide Plate Kit – Mercury/Mariner
Note:Please call our Technical Department for Hynautic Steering Parts,Cylinders, Reservoir, Reservalves, Helm & Cylinder Seal Kits.
For more information see: www.teleflexmarine.com54
SEAL KITS- HELMS & CYLINDERS
HYDRAULIC STEERING
HELMSORDER NO. Mfr. No. Description
034-51510 HS 5151 Seal Kit, SeaStar HelmHH5201 / HH5202 / HH5220 / HH5241 /HH5242 / HH5741 / HH5742
034-51760 HS5176 Seal Kit, SeaStar HelmSeastar I 1984 – 1990HH4513, HH4514, HH5201,HH5202, HH5217, HH5218,HH5220, HH5224, HH5231,HH5241, HH5242, HH5260,HH5261, HH5262, HH5269,HH5270, HH5271, HH5272,HH5273, HH5279, HH5280,HH5281, HH5282, HH5289,HH5290, HH5291, HH5292,HH5741, HH5742, HH5743,HH5744, HH5745, HH5760,HH5761, HH5762, HH5770,HH5771, HH5772, HH5773,HH5774, HH5775, HH5778,HH5779
034-51610 HS 5161 Seal Kit, SeaStar Helm250V / 275V / 1250V / 1275V
034-51710 HS 5171 Seal Kit, SeaStar Helm1350 / 1350S
ORDER NO. Mfr. No. Description
034-51520 HS 5152 Seal Kit, O/B CylinderHC5340 / HC 5342 “Snap-Ring” version
034-51570 HS 5157 Seal Kit, O/B Cylinderwith wrench (“screw-in-end” gland)HC5340 / HC5342 / HC5365 HC5345HC5347 / HC5348 / HC5358 HC5343
034-51670 HS 5167 Seal Kit, O/B Cylinderwithout wrench (“screw-in-end” gland)HC5340 / HC5342 / HC5365 HC5345HC5347 / HC5348 / HC5358 HC5343
034-51530 HS 5153 Seal Kit, O/B CylinderHC 5370 / OEMHC5371
034-51550 HS 5155 Seal Kit, O/B CylinderHC 5380
034-51540 HS 5154 Seal Kit, O/B Cylinder125 BA/EM, MV,BJ/ATM,EMV (Alum.)
034-51550 HS 5155 Seal Kit, O/B Cylinder135 BA/EM, MV, BJ/ATM,EMV(Alum.)
034-51560 HS 5156 Seal Kit, O/B Cylinder150 BA/EM, MV, BJ/ATM,EMV(Alum.)
034-51820 HS 5182 Seal Kit, O/B Cylinder150-7 BA / STD , TR, TM (BRASS)
034-51830 HS 5183 Seal Kit, O/B Cylinder175-7 BA / TR, TM (BRASS)
034-51840 HS 5184 Seal Kit, O/B Cylinder200-7 BA / STD, TR, TM (BRASS)
CYLINDERS
HYDRAULIC STEERING - SEAL KITS & PARTS
55
POWER ASSIST STEERING SYSTEM
Advantages:• Steering feel is solid every time.• Complete Fill & Purge in 10 minutes or less.• Fast and efficient.• Easy to operate• Screens contaminants from oil.• Quick connect fittings.• Convenient portable size.• Convenient electrical hook-up utilizing your12 volt boat battery.
Mfr. No. HA5445-2ORDER NO. 033-54450
SeaStar / BayStar Power Purge Jr. is the quickest way tobleed a SeaStar/BayStar system in the field and assure arock-solid steering feel every time!
The Power Purge Jr. reduces installation and warrantycosts while enhancing the quality of the boat to the enduser. A typical manual fill and purge takes theaverage experienced installer or servicetechnician about 30 minutes per boat - by usingthe Power Purge Jr. this can be reduced to10 minutes or less.
WHY USE POWER ASSIST?Today’s high horsepower engines are much heavier and are producing morepropeller torque than ever before. Naturally this additional weight and torque has aneffect on the boat’s steering whenthese loads are transferred to thewheel. Unacceptable levels ofsteering load can increase driverfatigue and discomfort. TheSeaStar Power Assist virtuallyeliminates all steering loads andprovides modern boaters the samelevel of steering comfort andcontrol found in cars. Even in themost extreme applications, the boat will be more comfortable to steer. The SeaStarPower Assist allows the boat to be driven safely and easily by the whole family.
COMPLETE SYSTEMS
DESCRIPTION Mfr. No. ORDER NO.
Power Assist, 15' Harness PA1200-2 034-12000
Power Assist, 25' Harness PA1225-2 034-12250
Power Assist PRO, 15' Harness PA1315-2 034-13150
FEATURES:• Dramatically reduces steering effort• Wall or Floor mount• Easy to install• OEM or retro-fit• Compatible with power purge system• Simple add-on to an existing SeaStar steering system(from 1.4 to 2.4 SeaStar helms)• Return to manual in failure mode• Suitable for use with autopilots• 12V or 24V operation• Wiring harness included• Ignition protected (SAE J-1171)• ABYC, CE, NMMA, ISO 10592 Approved
SYSTEM OVERVIEW:The SeaStar Power Assist unit can be installed on new
SeaStar steering installations or as an easy retro-fit to existingsystems.
Suitable for most boat types, the SeaStar Power Assist usesan electronically controlled hydraulic pump to provide on-demandpower steering.
It is installed into the hydraulic steering circuit between thehelm and steering cylinder. The Power Assist unit is powered fromthe boat’s battery and adjusts automatically to the input voltage(12V or 24V).
The SeaStar Power Assist can be used on boats withmultiple engines and rudders, multiple steering stations andautopilots.
If power to the unit is interrupted for any reason, thesteering system will automatically return to manual operationwithout any change to the number of lock-to-lock turns. In thiscase, the steering will of course be heavier than with thePower Assist activated.
For more information see: www.teleflexmarine.com
FAST & EFFICIENT
TECHNICAL SPECIFICATIONSVoltage 12V or 24V (automatically recognized)System Pressure 1000 psi MAX (1500 psi MAX Power Assist Pro)Current Draw 40 A MAX, 60 A Peak (1 A System Electronics)
TYPICAL APPLICATIONS- 150hp+ single outboards- Heavy 4-stroke outboards- Twin/Triple outboards- High performance bass boats (SeaStar Power Assist Pro)- Non-counter-rotating twin outboards- Inboards where rudder torque makes wheel effort heavy or uncomfortable
SEASTAR POWER ASSIST STEERING SYSTEM:SeaStar Power Assist steering dramatically reduces steering effort in heavy or high torque applications.Power assisted steering delivers exceptional performance and unparalleled levels of safety and comfort,even in the most extreme conditions.
OPTIONS
Dual Ignition Control Kit HA1201 033-12010
Harness Fuse Kit HA1206 033-12060
For more information see: www.uflexusa.com56
A.M66 UNIVERSAL ROTARY STEERING CABLEDirect replacement for Uflex Rotary HelmsSolid stainless steel output end fittings
B.M86 UNIVERSAL RACK STEERING CABLE
Direct replacement for Uflex Rack HelmsSolid stainless steel output end fittings
G86 762-14186
T71FC 762-13771
HELMS
X52X35X34
ORDER NO. Mfr. No. Description762-00034 X34 90 Degree Bezel for all Standard Uflex Helms762-00035 X35 20 Degree Bezel for all Standard Uflex Helms762-00052 X52 Tilt Mechanism for Tilt Uflex Helms
UFLEX RACK AND PINION STEERINGPerfect for sterndrives, inboards and power assistedapplications. The RackTech offers smooth and precisesteering and 3.5 turns lock to lock. System includesG86 Helm, X34 Bezel and M86 Universal Rack Cablewith stainless steel output end fittings.
ORDER NO. Mfr. No. Description762-13771 T71FC Standard Rotary Helm762-13772 T72FC Dual Cable Standard Rotary Helm
(Not Shown)762-13781 T81FC Tilt Rotary Helm
(Shown with X52 Tilt Mechanism)762-14186 G86" Standard Rack Helm
T81FC 762-13781(Shown with X52)
BEZELS
A B
UFLEX ROTARY STEERING KITS- WITH THE PLANETARY GEAR DESIGNFeaturing the Planetary Gear Design, the Rotech reduces rudder torque feedback andprovides for smooth steering and increased durability. This system is a directreplacement for competing systems and requires no additional holes in the dash.System offers 4 turns lock to lock and includes T71FC Helm, X34 Bezel and M66Universal Rotary Cable with stainless steel output end fittings.
MECHANICAL STEERING
UFLEX STEERING SYSTEM - Individual Components
STEERING CABLES
Order No. Mfr. No. Kit Length/Ft
762-13708 Rotech-08 8'
762-13709 Rotech-09 9'
762-13710 Rotech-10 10'
762-13711 Rotech-11 11'
762-13712 Rotech-12 12'
762-13713 Rotech-13 13'
762-13714 Rotech-14 14'
762-13715 Rotech-15 15'
762-13716 Rotech-16 16'
762-13717 Rotech-17 17'
762-13718 Rotech-18 18'
762-13719 Rotech-19 19'
762-13720 Rotech-20 20'
Order No. Mfr. No. Kit Length/Ft
762-14109 Racktech-09 9'
762-14110 Racktech-10 10'
762-14111 Racktech-11 11'
762-14112 Racktech-12 12'
762-14113 Racktech-13 13'
762-14114 Racktech-14 14'
762-14115 Racktech-15 15'
762-14116 Racktech-16 16'
762-14117 Racktech-17 17'
762-14118 Racktech-18 18'
762-14119 Racktech-19 19'
762-14120 Racktech-20 20'
Order No. Kit Length/Ft
762-66008 8'
762-66009 9'
762-66010 10'
762-66011 11'
762-66012 12'
762-66013 13'
762-66014 14'
762-66015 15'
762-66016 16'
762-66017 17'
762-66018 18'
762-66019 19'
762-66020 20'
Order No. Kit Length/Ft
762-86009 9'
762-86010 10'
762-86011 11'
762-86012 12'
762-86013 13'
762-86014 14'
762-86015 15'
762-86016 16'
762-86017 17'
762-86018 18'
762-86019 19'
762-86020 20'
FRONT MOUNT CYLINDERUC-128-OBF• 128cc / 7.8 cu. in. Displacement• Compact Design• Heavy Duty Stainless Steel Link Arm• Balanced Front Mount Design• Rated for 600 Horsepower CounterRotating Engines
OUTBOARD HYDRAULIC HOSE KIT - KITOBORDER NO. Mfr. No. Description762-99910 KITOB-10’ Hose Kit w / Bend Restrictors 10’762-99912 KITOB-12’ Hose Kit w / Bend Restrictors 12’762-99914 KITOB-14’ Hose Kit w / Bend Restrictors 14’762-99916 KITOB-16’ Hose Kit w / Bend Restrictors 16’762-99918 KITOB-18’ Hose Kit w / Bend Restrictors 18’762-99920 KITOB-20’ Hose Kit w / Bend Restrictors 20’762-99922 KITOB-22’ Hose Kit w / Bend Restrictors 22’762-99924 KITOB-24’ Hose Kit w / Bend Restrictors 24’
For more information see: www.uflexusa.com
UC-128-OBF-1ORDER NO. 762-01280
UC-128-OBF-2ORDER NO. 762-01282
UC-128-OBF-3ORDER NO. 762-01283
DimensionsA: 15.5", 394 mmB: 4.25", 108 mm
V43 STAINLESS STEELNon-magnetic stainless steel wheel constructed of highgrade stainless steel, Wheel has a cast and welded hub andwelded spokes at the rim.Fits Standard 3/4" tapered shaft.ORDER NO.762-20043
HYDRAULIC OIL OIL 15Grade: ISO VG 15Viscosity: 15 cst @ 40˚ CelsiusViscosity Index: <100Solidification Point: <-30˚ Celsius
ORDER NO. 762-00015
SIDE MOUNT CYLINDERUC-132-OBS• 163cc / 9.95 cu.in Displacement• Patented Mounting Collar for Easy Installation• Rated for 450 Horsepower CounterRotating Engines ORDER NO. 762-01320
FRONT MOUNT HELMUP-28-FMDrop-in Replacement for Teleflex® SeaStar® HelmsBuilt-in Check Valve to Eliminate Rudder TorqueShaft: 3/4" Tapered Shaft, Stainless SteelRelief Valve Setting: 70 Bar - 1000 PSIDisplacement / Rev.: 28cc / 1.7 cubic inchMaximum Wheel Diameter: 710mm - 28"
ORDER NO. 762-00280
INDIVIDUAL COMPONENTS
Hose Kit for Single Station Installation
Kit consists of (2) two flexiblehigh pressure hydraulic hoseswith preassembled endfittings and bend restrictors.
57
HYDRAULIC STEERING
HYDRAULIC OUTBOARD STEERING KIT
WHEEL TURNS 4.7
PACKAGE KIT CONTAINS:• UP20 F Front Mount Helm Pump• UC94-OBF Front Mount Outboard CylinderSpecify engine type when ordering(762-00940) Hyco-1 - with UC94-OBF/1 Cylinder• OIL 15 Hydraulic oil - 2 quarts (762-00015)
Kit OB OptionalHose kit with preassembled fittings-Specify length required when orderingThe wheel is not includedSee Outboard Hydraulic Hose Kits on Page 57
These recommendations should be used as a general reference only.For further information please contact technical service at Phone No. 941-782-1867
Outboard Hydraulic Steering System KitFor Engines 150 HP or below
ORDER NO. 762-90005Mfr. No. HYCO-1HYCO-1 Front MountHydraulic Steering Kit(Includes 762-00940 Cylinder)
58For more information see: www.uflexusa.com
ENGINE MAKE ENGINE MODEL YEAR CYLINDER ORDER NO. HYCO KIT ORDER NO.
MERCURY® F50 EFI–F60 EFI - 4 Stroke 2004 to date 762-00940 762-90005MARINER® F75-F90 - 4 Stroke 2000 to date 762-00940 762-90005
115 EFI - 4 Stroke 2001 to date 762-00940 762-90005135-150 Optimax™ - 2 Stroke 1999 to date 762-00940 762-9000575-90 - 2 Stroke 1990 to date 762-00940 762-90005
YAMAHA® F80A-F100A - 4 Stroke 1999 to date 762-00940 762-90005F115A - 4 Stroke 2000 to date 762-00940 762-90005F150A - 4 Stroke 2004 to date 762-00940 762-9000575C - 2 Stroke 1998 to date 762-00940 762-90005115C-130B - 2 Stroke 1990 to date 762-00940 762-90005150F - 2 Stroke 1996 to date 762-00940 762-90005150 HPDI - 2 Stroke 2000 to date 762-00940 762-90005
HONDA® BF75A-BF90A - 4 Stroke 1995 to date 762-00940 762-90005BF135-150 - 4 Stroke 2005 to date 762-00940 762-90005
JOHNSON® J50 - 2 Stroke 2004 762-00940 762-90005J90-J115 - 2 Stroke 1995 to date 762-00940 762-90005J150 - 2 Stroke 1995 to date 762-00940 762-90005BJ60-BJ70 - 4 Stroke 2001 to date 762-00940 762-90005BJ90-BJ115-BJ140 - 4 Stroke 2001 to date 762-00940 762-90005
EVINRUDE® E100-E115 - 2 Stroke 1995 to date 762-00940 762-90005E135-E150 - 2 Stroke 1995 to date 762-00940 762-9000540-50-60 E-TEC - 2 Stroke 2004 762-00940 762-9000575-90 E-TEC - 2 Stroke 2004 762-00940 762-90005
SUZUKI® DF70 - 4 Stroke 1998 to date 762-00940 762-90005DF90-DF115-DF140 - 4 Stroke 1998 to date 762-00940 762-90005DF150 - 4 Stroke 2006 to date 762-00940 762-90005
SELVA® Marlin 100 - 4 Stroke 2001 to date 762-00940 762-90005Narwhal 115 - 4 Stroke 2001 to date 762-00940 762-90005
TOHATSU® 40-50 TLDI - 2 Stroke 2004 762-00940 762-9000570-90 TLDI - 2 Stroke 2004 762-00940 762-90005M60-M70 - 2 Stroke 2004 762-00940 762-90005M90 - 2 Stroke 2004 762-00940 762-90005M120-M140 - 2 Stroke 2004 762-00940 762-90005
HYDRAULIC STEERING
ENGINE MAKE ENGINE MODEL YEAR CYLINDER ORDER NO. PROTECH KIT ORDER NO
MERCURY® 75-90-115, Optimax - 2 Stroke 2004 to date 762-01283 762-90003MARINER® 135-150-175, Optimax - 2 Stroke 1999 to date 762-01280 762-90001
200-225, Optimax - 2 Stroke 1999 to date 762-01280 762-90001300 Optimax - 2 Stroke 2006 to date 762-01280 762-9000175-90, - 2 Stroke 1990 to date 762-01280 762-90001115, - 2 Stroke 1988 to date 762-01280 762-90001125, - 2 Stroke 1994 to date 762-01280 762-90001225-250 , - 2 Stroke EFI / Saltwater EFI 1996 to date 762-01280 762-9000175-90, - 4 Stroke 2000 to date 762-01280 762-90001115, - 4 Stroke EFI / Saltwater EFI 2001 to date 762-01280 762-90001Verado 135, - 4 Stroke 2006 to date 762-01280 762-90001Verado 150, - 4 Stroke 2006 to date 762-01280 762-90001Verado 175, - 4 Stroke 2005 to date 762-01280 762-90001Verado 200, - 4 Stroke 2007 to date 762-01280 762-90001250, - 4 Stroke Saltwater EFI 2004 to date 762-01280 762-90001
YAMAHA® 70B, - 2 Stroke, 3 Cyl. Carb. 1984 to date 762-01280 762-9000175C-90A, - 2 Stroke, 3 Cyl. Carb. 1998 to date 762-01282 762-90002115C-130B, V-4, - 2 Stroke Carb. 1990 to date 762-01282 762-90002150F-200F, V-6, - 2 Stroke Carb. 1996 to date 762-01282 762-90002250A, V-6, - 2 Stroke Carb. 1990 to date 762-01282 762-90002150-175-200, V-6, HPDI, - 2 Stroke 2000 to date 762-01282 762-90002250, V-6, HPDI, - 2 Stroke 2003 to date 762-01282 762-90002300, V-6, HPDI, - 2 Stroke 2004 to date 762-01282 762-90002F80A- F100A, - 4 Stroke 1999 to date 762-01280 762-90001F115A, - 4 Stroke 2000 to date 762-01280 762-90001F150A, - 4 Stroke 2004 to date 762-01280 762-90001F200A- F225A, - 4 Stroke 2002 to date 762-01282 762-90002F300A- V8, - 4 Stroke 2007 to date 762-01282 762-90002
HONDA® BF75-90, - 4 Stroke 1995 to date 762-01280 762-90001BF115-130, - 4 Stroke 1998 to date 762-01283 762-90003BF135-150, - 4 Stroke 2004 762-01280 762-90001BF175-200-225, - 4 Stroke 2001 to date 762-01280 762-90001
JOHNSON® BJ70, - 4 Stroke 2001 to date 762-01282 762-90002BJ90-115-140, - 4 Stroke 2001 to date 762-01280 762-90001J90-115, V-4, 2-Stroke 1995 to date 762-01282 762-90002J150-175, V-6, - 2 Stroke 1995 to date 762-01282 762-90002J200-225, V-6, - 4 Stroke 2004 762-01282 762-90002
EVINRUDE® 75-90 E-Tec, - 2 Stroke 2004 762-01282 762-90002E100 -115HP, V-4, - 2 Stroke 1995 to date 762-01282 762-90002E135-150-175HP, V-6, - 2 Stroke 1995 to date 762-01282 762-90002E200-225-250HP, V-6, - 2 Stroke 1995 to date 762-01282 762-90002
SUZUKI® DF70, - 4 Stroke 1998 to date 762-01282 762-90002DF90-115-140HP, - 4 Stroke 1998 to date 762-01280 762-90001DF150, - 4 Stroke 2006 to date 762-01280 762-90001DF175, - 4 Stroke 2006 to date 762-01280 762-90001DF200-225-250HP, - 4 Stroke 2004 to date 762-01282 762-90002
TOHATSU® MD70B-TLDI, - 2 Stroke 2004 762-01282 762-90002MD90B-TLDI, - 2 Stroke 2004 762-01282 762-90002M120A2, - 2 Stroke 2004 762-01282 762-90002M140A2, - 2 Stroke 2004 762-01282 762-90002
762-90001Protech-1,Hydraulic O/B Steering Kit(Includes 762-01280 Cylinder)762-90002Protech-2,Hydraulic O/B Steering Kit(Includes 762-01282 Cylinder)762-90003Protech-3,Hydraulic O/B Steering Kit(Includes 762-01283 Cylinder)
PROTECH OUTBOARDSTEERING KIT 4.29 Turns Lock to Lock
PACKAGE KIT CONTAINS:• UP28 FM Front Mount Helm Pump (762-00280)• UC128-OBF/1 Front Mount O/B CylinderSpecify engine type when ordering(762-01280) PROTECH 1 - with UC128-OBF/1 Cylinder or(762-01282) PROTECH 2 - with UC128-OBF/2 Cylinder or(762-01283) PROTECH 3 - with UC128-OBF/3 Cylinder• OIL 15 Hydraulic oil - 2 quarts (762-00015)Note: Hose Kit ExtraThese recommendations should be used as a general reference only.For further information please contact technical service at Phone no. 941-782-1867
For more information see: www.uflexusa.com59
HYDRAULIC STEERING
For more information see:www.uflexusa.com
HYDRAULIC STEERING
60
HIGH PERFORMANCE OUTBOARD STEERING SYSTEMS
SILVERSTEER™ WHEEL TURNS: 4,3SilverSteer™ packaged kit contains:• UP28 F-SVS Front mount helm pump• UC128-SVS Front mount outboard cylinder. Specify engine type when ordering.• Oil 15 Hydraulic Oil 2 litres (0.5 gallons)•Note: Hose kit with preassembled fittings not included.Specify engine type when ordering. See below for Hose Kits
SilverSteer™ 1.0- Front Mount Outboard System with UC128/1-SVS CylinderORDER NO. 762-88001 Mfr. No. SILVER STEER 1.0
Silver Steer™ 2.0- Front Mount Outboard System with UC128/2-SVS CylinderORDER NO. 762-88002 Mfr. No. SILVER STEER 2.0
762-88281
762-88280
762-88810
Specifically designed for high performance and high torque applications, the SilverSteer features a 1500 Psi helm and keyed bullhorn on thecylinder for maximum durability and minimal lost motion. Whether a bass boat, flats boat or tournament style offshore fishing boat, theSilverSteer will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk ofbreaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.Note: The wheel is not included.
SILVERSTEER™ HIGH PERFORMANCE HELMS
FRONT MOUNT & TILT MOUNT FEATURES:• Available in three different displacement sizes (2.4 cu. in special order)• Compact design• Ball bearing piston race• Built-in lock valve for positive rudder lock• Integral relief valve for over-pressure protection 105 bar (1500 psi)• 3/4” tapered stainless steel shaft• Easily accessible lock valve and shaft seal for replacement• Cast iron rotor for greater durability and longer life• Complete with fittings adjustable at 45° for 3/8” tube•FRONT MOUNT HELMSORDER NO. Mfr. No. Displacement/Revolution No. of Pistons762-88280 UP28F-SVS 28 cc - 1.7 cu.in 5762-88330 UP33F-SVS 33 cc - 2.0 cu.in 7
ADDITIONAL FEATURES FOR TILT MOUNT HELMS:• Includes Tilt mechanism for SilverSteer™ systems Order No. 762-00070 (Mfr. No. X70-SVS)• Tilt range of 48° and five locking positions
ORDER NO. Mfr. No. Displacement/Revolution No. of Pistons762-88281 UP28T-SVS 28 cc - 1.7 cu.in 5762-88331 UP33T-SVS 33 cc - 2.0 cu.in 7
SILVERSTEER™ O/B HYDRAULIC HOSE KIT – 2 HOSESHose Kit for Single Station Installation for SILVERSTEER™ SystemsKit consists of a pair of high pressure 1500 PSI stranded flexible hoses, supplied with preassembledstainless steel fittings and bend restrictors on both ends
ORDER NO. Mfr. No. Description762-88810 KITOBSVS-10’ SILVER STEER Hose Kit 10 ft.762-88812 KITOBSVS-12’ SILVER STEER Hose Kit 12 ft.762-88814 KITOBSVS-14’ SILVER STEER Hose Kit 14 ft.762-88816 KITOBSVS-16’ SILVER STEER Hose Kit 16 ft.762-88818 KITOBSVS-18’ SILVER STEER Hose Kit 18 ft.762-88820 KITOBSVS-20’ SILVER STEER Hose Kit 20 ft.762-88822 KITOBSVS-22’ SILVER STEER Hose Kit 22 ft.762-88824 KITOBSVS-24’ SILVER STEER Hose Kit 24 ft.
For more information see: www.uflexusa.com61
HYDRAULIC STEERING
INNOVATIVE NEWDESIGN (Patented)
Split cylinder mounting rodfor easy installation andbushings to prevent frictionwith engine tilt tube
OUTBOARD STEERING SYSTEMS
SPLASHWELL DIMENSION REQUIREMENTSEngine No. A B C
1 560 mm - 22.05" 152 mm - 5.98" 152 mm - 5.98"
2 1110 mm - 43.70" 152 mm - 5.98" 152 mm - 5.98"
WARNING:These recommendations should be used as a general reference only. Final selection should be made with theassistance of a qualified installation technician. For any further information please contact our technical service.
ENGINE MAKE ENGINE MODEL YEAR CYLINDER ORDER N0. SILVERSTEER ORDER N0.
MERCURY® 135-150-175 Optimax™ - 2 Stroke 1999 to date 762-12801 762-88001MARINER® 200-225 Optimax™ - 2 Stroke 1999 to date 762-12801 762-88001
300 Optimax™ - 2 Stroke 2006 to date 762-12801 762-8800175-90 - 2 Stroke 1990 to date 762-12801 762-88001115 - 2 Stroke 1988 to date 762-12801 762-88001125 - 2 Stroke 1994 to date 762-12801 762-88001225-250 - 2 Stroke EFI / Saltwater EFI 1996 to date 762-12801 762-88001250 - 4 Stroke Saltwater EFI 2004 to date 762-12801 762-8800175-90 - 4 Stroke 2000 to date 762-12801 762-88001115 - 4 Stroke EFI / Saltwater EFI 2001 to date 762-12801 762-88001Verado 135 - 4 Stroke 2006 to date 762-12801 762-88001Verado 150 - 4 Stroke 2006 to date 762-12801 762-88001Verado 175 - 4 Stroke, 2005 to date 762-12801 762-88001Verado 200 - 4 Stroke,Verado 250 - 4 Stroke SaltwaterVerado 200 - 4 Stroke 2006 to date 762-12801 762-88001
YAMAHA® 70B - 2 Stroke 3 Cyl. Carb. 1984 to date 762-12801 762-8800175C-90A - 2 Stroke 3 Cyl. Carb. 1998 to date 762-12802 762-88002115C-130B V4 - 2 Stroke Carb. 1990 to date 762-12802 762-88002150F-200F V6 - 2 Stroke Carb. 1996 to date 762-12802 762-88002250A V6 - 2 Stroke carb. 1990 to date 762-12802 762-88002150-175-200 V6 HPDI - 2 Stroke 2000 to date 762-12802 762-88002250 V6 HPDI - 2 Stroke 2003 to date 762-12802 762-88002300 V6 HPDI - 2 Stroke 2004 to date 762-12802 762-88002F80A-F100A - 4 Stroke 1999 to date 762-12801 762-88001F115A - 4 Stroke 2000 to date 762-12801 762-88001F150A - 4 Stroke 2004 to date 762-12801 762-88001F200A-F225A - 4 Stroke 2002 to date 762-12802 762-88002F300A-F350A V8 - 4 Stroke 2007 to date 762-12802 762-88002
HONDA® BF75-90 - 4 Stroke 1995 to date 762-12801 762-88001BF135-150 - 4 Stroke 2004 to date 762-12801 762-88001BF175-200-225 - 4 Stroke 2001 to date 762-12801 762-88001
JOHNSON® BJ70 - 4 Stroke 2001 to date 762-12802 762-88002BJ90-115-140 - 4 Stroke 2001 to date 762-12801 762-88001J90-115 V4- 2 Stroke 1995 to date 762-12802 762-88002
J150-175 V6 - 2 Stroke 1995 to date 762-12802 762-88002J200-225 V6 - 4 Stroke 2004 762-12802 762-88002
EVINRUDE® 75-90 E-TEC - 2 Stroke 2004 762-12802 762-88002E100-115hp V4 - 2 Stroke 1995 to date 762-12802 762-88002E135-150-175hp V6 - 2 Stroke 1995 to date 762-12802 762-88002E200-225-250hp V6 - 2 Stroke 1995 to date 762-12802 762-88002
SUZUKI® DF70 - 4 Stroke 1998 to date 762-12802 762-88002DF90-115-140hp - 4 Stroke 1998 to date 762-12801 762-88001DF150 - 4 Stroke 2006 to date 762-12801 762-88001DF175 - 4 Stroke 2006 to date 762-12801 762-88001DF200-225-250hp 4 Stroke 2004 to date 762-12802 762-88002
SERIES
For more information see: www.teleflexmarine.com62
3300/33C (1ft increments) COLOR PART NO.Standard Black CC172XX /CC230XXMidrange Red CC332XX
Mercury/Mercruiser (1ft increments)Standard (600A type) Black CC179XXStandard (Gen II type) Black CC189XX
BRP-OMC-Johnson/Evinrude 1979 to date (1ft increments)Standard Black CC205XX
XX = Length in feet
CONTROL FEATURES
CONTROL CABLES
START-IN-GEAR PROTECTION-
NEUTRAL INTERLOCK-
ENGINE WARM-UP PROVISION-
ENGINE CUT-OF SWITCH-
ADJUSTABLE THROTLE BRAKE-
TRIM & TILT SWITCH-
ADJUSTABLE TRAVEL STOPS-
MAXIMUM NUMBER OF ENGINES-
33C/3300 UNIVERSAL TYPE-
MERCURY/MARINER OEM TYPE-
MERC GEN II CABLES-
43 SERIES CABLES-
BRP-OMC-JOHNSON/EVINRUDE OEM TYPE-
SINGLE FUNCTION
PRODUCT RANGE MECHANICAL CONTROLS
CH4400 CH5600 SR TWIN S ST/STB
� � � �
• • • •
• • • • �
• • • •1 1 1 1 1
• • • • •
� � •
CCX172XX/
CCX332XX
CCX179XX
CCX189XX
CCX205XX
GENERAL CONTROL CABLES
KEY:• Standard � Optional � Optional for ski version, CH2200
CCX230XX
Gen II type cabledesigned specifically to beused with Mercury 4000series controls.
Black Cable
Red Cable
CONTROLS OVERVIEW
CH1700 CH7500 CH7800 MT3 TOP MT3 SINGLE CH2200/CH2300
CH2600/CH2700 MV3
• • • • • •� � •• � • • •• • • • • • • •• �
• • • • •� � � �
1 1 2 2 1 1 1 1
For more information see: www.teleflexmarine.com
63
PRODUCT RANGE MECHANICAL CONTROLS
DUAL FUNCTION
• • • • • • • •• • •• • •
� �
• • •
Simply the best cable inthe business.
Patent-pending uniquesplined-core design gives youmaximum performance withno lost motion.Recommended forlong cable runs.
CCX633XX
CCX179XX
CCX630XX
CCX189XX
CCX205XX
TFXTREME CONTROL CABLES
KEY:• Standard � Optional � Optional for ski version, CH2200
3300/33C (1ft increments) COLOR PART NO.Premium (Universal) Black CCX633XX
Mercury/Mercruiser (1ft increments)Premium (600A type) Black CCX179XXPremium (3600 type) Black CCX630XXPremium (Gen II type) Black CCX189XX
BRP-OMC-Johnson/Evinrude (1ft increments)Premium (479 type) Black CCX205XX
XX = Length in feet
CONTROLS OVERVIEW
*NOTE: When properly installed, these enginecontrols will connect to outboard, stern drive andinboard engines, utilizing Mercury/Mariner® andOMC® OEM type control cables as well as universal3300/33C type cables and engine connection kits.
64
CH1700 SERIES:CH1700 series of controls are the most sure handling and comfortable youcan buy. The shapely, balanced grip provides a very smooth yet solid feel.This side mount control is designed for Starboard (right side) gunwalemounting only. These controls come with the standard features of neutralsafety switch, neutral lock out, neutral warm up and the safety stop switchwith lanyard. You can also get the optional trim switch (most outboards) ortrim and tilt (most stern drives). These controls not only use the 3300/33Cstyle control cables they can also use Mercury style cables from 1965 todate including the Gen II, OMC/Johnson/Evinrude/BRP control cables from1979 to date. This makes it one of the most desirable replacement controlsin the market today.
APPLICATION:Dual-function control — one lever controls throttle AND shift.For nearly any engine.
FEATURES:• Superior feel and function for mostoutboards, stern drives & inboards.• Dual function lever controls both throttleand shift of one engine.• Neutral interlock and start-in-gearprotection (standard).• Optional Trim in the handle.• Neutral engine warm-up feature (standard).• Optional tilt switch available.• Standard lanyard-style cut-off switch foremergency engine shutdown.• Friction adjustment feature included.• “Easy-On” cable design accepts virtuallyevery type of OEM and 3300/33C type cable.• Easily adapted to push or pull cableactuation mode.• Mechanical advantage 2.38:1• Meets/exceeds all applicable standards.• Made in the U.S.A.
CH7500 SERIES:CH7500 series controls offer options that mosts top mount controls in themarket do not. Options like trim (most outboards) or trim and tilt (most sterndrives) or the newly released neutral lock out button. The lock out button isgreat for center console boats where there is a possibility the control can bebumped while passing by knocking it into gear. The standard items on thesecontrols are the shapely and balanced hand grip that gives you a verysmooth yet solid feel. The neutral safety switch, and the neutral warm upbutton. These controls not only use the 3300/33C style control cables theycan also use Mercury style cables from 1965 to date including the Gen II,OMC/Johnson/Evinrude/BRP control cables from 1979 to date. This makes itone of the most desirable replacement controls in the market today.
APPLICATION:Dual-function control — one lever controls throttle AND shift.For nearly any engine.
FEATURES:• Superior feel and function for most outboards stern drives & inboards.• Dual function lever controls both throttle and shift of one engine.• Neutral safety offers start-in-gear protection (standard).• Optional Trim in the handle for each model.• Neutral engine warm-up feature (standard).• Optional tilt switch available.• Friction adjustment feature included.• “Easy-On” cable design accepts virtually every type of OEM and3300/33C type cable.• Easily adapted to push or pull cable actuation mode.• Mechanical advantage 2.38:1• Meets/exceeds allapplicable standards.
• Made in the U.S.A.
DESCRIPTION Mfr. No. ORDER NO.
Side Mount, Chrome Handle, Black Cover,Chrome and Black Inserts,I/O and O/B stop switch
CH1750P 118-17500
Side Mount, Chrome Handle, Black Cover,Chrome and Black Inserts with Trim,I/O and O/B stop switch
CH1751P 118-17510
Side Mount, Chrome Handle, Black Cover,Chrome and Black Inserts with Trim & Tilt,I/O and O/B stop switch
CH1752P 118-17520
ENGINE
CONTROLS
ENGINE
CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
Insert Kit - CH1700 - Black 7213111 721-31110
Insert Kit - CH1700 - Chrome 7213017 721-30170
Neutral Warm-up Button Kit - CH1700 7213214 721-32140
Tilt Switch - CH1700 - w/Chrome & BlackInsert Kit
7206215 720-62150
Outboard Cutoff Switch - CH1700with Chrome & Black Insert Kit
7206212 720-62120
Stern Drive (I/O) and Inboard CutoffSwitch - CH1700 with Chrome & BlackInsert Kit
7206211 720-62110
Cable Nest and Connection Kit 212151-003 212-15103
DESCRIPTION Mfr. No. ORDER NO.
Dome Cover - CH7500/CH7600 - Chrome 7214113 721-41130
Insert Kit CH7500 - with & w/o Tilt hole-Black (2 inserts)
7214518 721-45180
Insert Kit CH7500 - with & w/o Tilt hole-Chrome (2 inserts)
7214311 721-43110
Neutral Warm-up Button Kit-CH7500/CH7600
7214715 721-47150
Tilt Switch - CH7500/CH7600 - withChrome & Black Insert Kit
7206216 720-62160
Cable Nest and Connection Kit 212151-003 212-15103
Single Top-Mount Control - with Neutral Interlock Lever on the Right
DESCRIPTION Mfr. No. ORDER NO.
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Insertswith Neutral Interlock
CH7550P 118-75500
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Inserts,with Trim, with Neutral Interlock
CH7551P 118-75510
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Inserts,with Trim & Tilt, with Neutral Interlock
CH7552P 118-75520
SERVICEITEM
SSERVICEITEM
S
CH7541P
CH1752P
Single Top-Mount Control - Lever on the Right
DESCRIPTION Mfr. No. ORDER NO.
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Inserts
CH7540P 118-75400
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Inserts,with Trim
CH7541P 118-75410
Single Top-Mount, Chrome Handle,Chrome Cover, Chrome and Black Inserts,with Trim & Tilt
CH7542P 118-75420
CH7500 SERIES
CH1700 SERIES
CONTROLS - DUAL FUNCTION
For more information see www.teleflexmarine.com65
CH7800 SERIES:
The ergonomics and features of our OspreySeries controls are the most advancedavailable and are suitable for most kinds ofboats with dual engine applications. Theshapely, balanced handle provides a verycomfortable feel and the state of the artmechanism guarantees a smooth yet solidaction, assuring you have maximumcontrol at all times. This control isdesigned for twin engine applications.CH7800 controls are suitable for use withboth universal type (3300) or OEM typecontrol cables without the need for adaptation.
These controls not only use the 3300/33C style control cables they can alsouse Mercury style cables from 1965 to date including the Gen II,OMC/Johnson/Evinrude/BRP contol cables from 1979 to date. This makes itone of the most desirable replacement controls in the market today.
FEATURES:
• Superior feel and function for most outboards, stern drives & inboards.
• All controls include start in gear protection
• Designed for use with both universal and OEM shift and throttle cableconnections
• Suitable for most boat/dual engine combinations
• Dual action levers (throttle and shift control in each handle)
• Trim, Tilt, options available
• Drag adjustment on all models
• Easy installation and set up
• Includes both chrome and black cover inserts that allow a choice ofstyling to ensure a perfect aesthetic fit in every application
MT-3 SINGLE LEVER (CH5310P)MT-3 TWIN LEVER (CH5300P):
Ideal for inboards, sterndrives and outboards,MT-3 combines classicbinnacle control stylingwith dual function levers,a neutral safety switchand an engine warm-upfeature! Control throttleand shift with one leverinstead of two.MT-3 Twin can controltwo engines.
APPLICATIONDual-function control— each lever controlsthrottle AND shift. Great for single station inboards stern drives andoutboards, single or dual engine. Perfect for applications in which a binnaclecontrol appearance is desired, but one-lever throttle/shift control ispreferred. Also a great choice when space is at a premium. This control uses3300/33C type cables (single and dual lever) and 4300/43 type cables(single lever version only). Not suitable for use with Mercury® and OMC®OEM type control cables.
FEATURES:• Binnacle styling with the advanced features of a dual-function control:one-handle engine control, neutral warm-up.
• Neutral safety switch to help prevent starting in gear (standard).• Mechanical advantage - shift 2.77:1/throttle 3.57:1.• Meets/exceeds all applicable industry standards.
*NOTE: When properly installed, these engine controls will connect to outboard, stern driveand inboard engines, utilizing Mercury/Mariner® and OMC® OEM type control cables aswell as universal 3300/33C type cables and engine connection kits.
SERVICE ITEMS
DESCRIPTION Mfr. No. ORDER NO.Dual Top-Mount, Chrome Handles,Chrome Cover, Chrome and Black Inserts
CH7840P 784-00000
Dual Top-Mount, Chrome Handles,Chrome Cover, Chrome and Black Inserts,with Trim
CH7841P 784-10000
Dual Top-Mount, Chrome Handles,Chrome Cover, Chrome and Black Inserts,with Trim & Tilt
CH7842P 784-20000
DESCRIPTION Mfr. No. ORDER NO.
Cable Nest and Connection Kit 212151-003 212-15103
ENGINE CONTROLS
OPTIONS/ SERVICE ITEMS
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.SINGLE LEVER:MT-3 Single (Old No. 303-08601)
CH5310P 118-53100
TWIN LEVER:MT-3 Twin (Old No. 303-08602)
CH5300P 118-53000
DESCRIPTION Mfr. No. ORDER NO.
Optional Neutral Safety Switch 305499 305-49900
Hand Lever 032778-002 300-32778
Chrome Side Plate, MT-3 308598-001 308-59801
Ball Knob, Red 4009912 015-40099
Stainless Steel Knob (red-grooved) CA69052P 015-69052
Hardware Kit for MT-3 single lever 308599 308-59900
Hardware Kit for MT-3 twin lever 308727 308-72700
43 Cable Heavy Duty Connection Kit(Must be used when connecting a4300/43CC 4300/43BC cable to the control.43 series cables can only be used with thesingle-lever model.)
308742 308-74200
Engine Connection Kits(see Connection Kits section)
NOTE: 4300/43 type cables cannot to be used on MT-3 Twin, asinterference will occur.
CH7800 SERIES
MT-3 SINGLE LEVER (CH5310P) MT-3 TWIN LEVER (CH5300P):
CH5300P
CH7841P
CH5310P
NEUTRAL WARM-UP(pull lever out from dome)
Teleflex Recommends Using
Cables With This Control
CONTROLS - DUAL FUNCTION
SIDE MOUNT (CH2600P)SIDE MOUNT WITH TRIM (CH2700P):Outboard Side Mount Control. This economical single lever, dual functioncontrol features positive shift detents, an optional engine trim switch inthe handle and easy installation. (Mounts to gunwale surface — no holecutout required.) It’s an excellent replacement for both outboard and sterndrive controls using universal (3300/33C type) cables only.
APPLICATION:Dual-function control — each lever controls throttle AND shift. Virtually allsingle-station outboards and stern drives with mechanical transmissions.Single lever, dual action design controls throttle and shift with one lever.Utilizes 3300/33C type “universal” engine control cables only. Not suitablefor use with Mercury® and OMC® OEM type control cables.
FEATURES:• Single lever, dual action for throttle & shift.• Surface mount design for quick, tidy installation.• Includes neutral warm up capability.• Includes hardware for two 3300/33C control cables.• Positive shift detents and neutral lock-out.• Optional engine trim switch in handle.• Optional neutral safety switch.• Weatherproof exterior, rugged die cast frame.• Meets/exceeds all applicable industry standards.
SKI BOAT (CH2200P)JET BOAT (CH2300P):Considered the best by boat builders, these controls feature superior styling, a compact design,positive lockout and smoothest feel available — and they’re standard equipment on ski and jetboats. The ski boat unit includes superior neutral warm-up action, while the jet boat versionfeatures a waterproof start-in-gear switch.
APPLICATION:Dual-function control — each lever controls throttle AND shift.Ski version: inboard ski boats and other single station craft requiringsuper smooth, precise throttle control. Jet version: jet boats powered byMercury® Sport Jet 90 & early 120, OMC® Turbo Jet, or similarpropulsion systems. Single lever, dual action design controls boththrottle and shift with one leverusing 3300/33C type cables.
FEATURES:• Single lever, dual action forthrottle & shift.
• Superior neutral engine warm-upcontrol (ski version).
• Flush mount design for quick,tidy installation.
• Includes hardware for two3300/33C type cables.
• Crisp shifting ball grip for a solid,sure feel.
• Neutral safety switches are standard on the CH2300P and optionalon the CH2200P.
• Weatherproof exterior, rugged diecast frame.• Meets/exceeds all applicable industry standards.Please note that while the CH2200P and CH2300P are similar in appearance, they have differentneutral safety switches and internal mechanisms.They are NOT interchangeable. Do not substitute CH2200P for CH2300P or vice-versa.
For more information see: www.teleflexmarine.com66
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
Side Mount (no Trim Switch) CH2600P 118-26000
Side Mount with Trim Switch CH2700P 118-27000
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.
Optional Neutral Safety Switch CA27090P 118-27090Engine Connection Kits(see Connection Kits section)
ENGINE CONTROLSDESCRIPTION Mfr. No. ORDER NO.SKI BOAT CONTROL:Side Mount Ski Boat Control
CH2200P 118-22000
JET BOAT CONTROL:Side Mount Jet Boat Control
CH2300P 118-23000
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.
CH2200P SKI
Optional Neutral Safety Switch (Ski) CA27090P 118-27090
CH2300P JET
Neutral Safety Switch (Jet) CA27100P 118-27100
CH2200P or CH2300P:
Stainless Steel Knob (red-grooved) CA69052P 015-69052
Stainless Steel Knob (smooth) CA69051P 015-69051
Cable Connection Kits(see Connection Kits & Jet Boat Steering sections)
SKI BOAT (CH2200P) JET BOAT (CH2300P):
SIDE MOUNT (CH2600P) SIDE MOUNT WITH TRIM (CH2700P):
CH2700P
NEUTRALWARM-UP BUTTON(push)
NEUTRALINTERLOCKRELEASE(lift to release)
TRIMCONTROL INHANDLE
CH2200PSKI BOATS
CH2300PJET BOATS
NEUTRALWARM-UP BUTTON(push)
NEUTRALINTERLOCKRELEASE(lift torelease)
Teleflex Recommends Using
Cables With This Control
CONTROLS - DUAL FUNCTION
For more information see: www.ongaromarine.com67
REPLACEMENT THROTTLE& SHIFT KNOBS
• 316 Cast Stainless Steel• Fits Morse® Control models MT-3, MV-2, Twin S, Twin SR, and ST• Fits Teleflex® CH5600 controls• Fits most Twin and Single controls with 3/8" (24 threads)• Red grooves for sight and touch• Lifetime Warranty• Meets new ABYC requirements
For more information see: www.teleflexmarine.com
MV-3 SERIES:The MV-3 offers style and incredible versatility in a dual-function, single-levercontrol. Several models are offered for outboards, stern drives, inboards, skiboats and jets, including versions with a lanyard-type emergency cut-offswitch.
APPLICATION:Dual-function control — Thelever controls throttle AND shift.Ideal for many outboards, sterndrives and inboards, withspecialized versions for ski andjet boats. Single lever, dualaction units control throttle andshift with one lever, using 3300or 4300 type control cables.Not suitable for use withMercury® and OMC® OEM typecontrol cables.
FEATURES:• Specially styled for today’s integrated cockpit.• Fits most popular outboards, inboards and sterndrives.• Emergency cut-off feature available for most popular MV-3 models.• Crisp, positive detents.• Pullout clutch disengagement feature for engine warm-up with automaticdisengagement.
• Neutral interlock feature to prevent accidental shifting.• Mechanical advantage - Shift 2.9:1 / Throttle 3.20:1.• Uses 3300 and 4300 type cables.• Can be used for Berkeley Jet (with 4300/43 type cables) andMercury 175 HP Sport Jet (with special cable).
• Meets/exceeds all applicable industry standards.
ENGINE CONTROLS
MV-3 Standard For Outboard, Stern Drive Or Inboard
DESCRIPTION Mfr. No. ORDER NO.MV-3 Standard ControlRH Orientation, AFT Cable Entry,Neutral Safety Switch (Old No. 311-36400)
CH2920P 118-29200
MV-3 Competition Ski Boat
DESCRIPTION Mfr. No. ORDER NO.MV-3 Competition Ski Boat withI/O Cut-Off Switch. (Old No. 311335-001)
CH2910P 118-29100
MV-3 For Jet Berkeley
DESCRIPTION Mfr. No. ORDER NO.MV-3 Jet Control (Berkeley), RH Orientation,Aft Cable Entry (Old No. 311412)
CH2940P 118-29400
Mercury Sport Jet 175 (uses special 4300 cable for reverse gate)
DESCRIPTION Mfr. No. ORDER NO.MV-3 HD Control (Merc 175)RH Orientation, Forward Cable Entry,Immersible Neutral Safety Switch,Throttle Limiter (Old No. 311508)
CH2950P 118-29500
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.Ball Knob, Black 4009819 015-40098
Neutral Safety Switch Replacement 300928 300-92800
MV-3 Emergency Cut-Off Switch Kitfor I/O and Inboard 311-48201
Cable Connection Kits(See Connection Kits and Jet Boat Steering sections.)
NOTES:Check with Engine/Drive Manufacturer for detailsparticular to your power train.
MV-3 series
MV-3
NEUTRALWARM-UP BUTTON(pull-out)
NEUTRALINTERLOCKRELEASE(lift torelease)
Order No. Mfr. No. Description856-50020 50020 Throttle Knob, Red Grooves – 1-1/2"856-50030 50030 Shift Knob, Smooth – 1-1/2" Model No. 50030
Model No. 50020
Teleflex Recommends Using
Cables With This Control
311482-001
CONTROLS - DUAL FUNCTION
68
ST (CH2400P)STB (CH2410P):The ST & STB controls areeconomical, and durable, with asimple, classic design. Single-function lever moves one cableonly. Versions are available for3300/33C and 4300/43C typecables, with or without external,adjustable throttle brake.
APPLICATION:Single-function control— each lever controls throttleOR shift. The STB control includesa throttle brake and can shiftBerkeley® or similar type jets when a foot throttle is used. ST/STB unitscan utilize 3300/33C type universal control cables and 4300/43C typecontrol cables. ST/STB controls are for single-station use only and arenot suitable for use with Mercury® and OMC® OEM type control cables.
FEATURES:• Compact, rugged design and classic traditional styling.• Durable heavy chrome finish.• Uses 3300/33C or 4300/43C type cables.• Available with or without adjustable external throttle brake.• Mechanical advantage - 3.20:1.
SINGLE S (CH5210P)TWIN S (CH5200P):This classic control is great forinboards, single or dual station. Thetime-proven design of Twin S meansyears of reliable operation. Acceptsuniversal control cables. Optional leverextension, detent kits and neutral safetyswitch available. Additional hardware isrequired for twin station use.
APPLICATION:Single-function control — each levercontrols throttle OR shift. Ideal forinboards, stern drives and outboards, theS controls are suitable for single or dualstation use. These single function enginecontrols are available in both one ortwo-lever models. Both S controls use 3300 and 4300 type cables. Not suitablefor use with Mercury® and OMC® OEM type control cables.
FEATURES:• Highly polished stainless steel cover.• Simple, rugged, compact design.• Easily adjustable throttle friction and shift detent feel.• Optional neutral safety switch to prevent starting in gear.• Optional hand lever extension.• Optional shift detent kit (if used in dual stations; use on main station only).• Option throttle hold kit.• Uses 3300 and 4300 type cables.• Mechanical advantage - shift 2.77:1/throttle 2.77:1.• Meets/exceeds all applicable industry standards.
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
SINGLE LEVER:Single S (Old No. 310-02001)
CH5210P 118-52100
TWIN LEVER:Twin S (Old No. 310-01001)
CH5200P 118-52000
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.
Dual Station Transfer unit(For Long or Difficult Cable Paths)
061371 300-61371
Single S - Hardware & Bearing Kit3300 Cables
CA67868P 015-67868
Twin S - Hardware & Bearing Kit3300 Cables
CA67869P 015-67869
Single S - Handle Replacement CA67866P 015-67866
Twin S - Handle Replacement CA67867P 015-67867
Single S - Cover Replacement CA67864P 015-67864
Twin S - Bezel Replacement CA67865P 015-67865
Clutch Detent Kit 022328 300-22328
In-Series Dual Station Kit, 30 Series(2 required for twin)
039489-002 394-89002
In-Series Dual Station Kit,40 Series (2 required for twin)
042152 300-42152
Neutral Safety Switch Kit 047307 300-47307
Lever Extension 036773 300-36773
Throttle Hold Kit (one per lever,prevents throttle creep)
306997 306-99700
Ball Knob, Red 035232-001 352-32001
Ball Knob, Black 035232-004 352-32004
Stainless Steel Throttle Knob (grooved) CA69052P ** 015-69052**
Stainless Steel Shift Knob (smooth) CA69051P ** 015-69051**
Cable Mounting Hardware Kit 3300, Twin 061001 300-61001
Connection Kits(see Connection Kits section)
** Fits most controls with 3/8-24 threaded levers.
** Fits most controls with 3/8-24 threaded levers.
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
ST Control with no brake(3300 and 4300 control cables)(Old No. 300-31791)
CH2400P 118-24000
STB Control with External brake(3300 and 4300 control cables)(Old No. 300-44777)
CH2410P 118-24100
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.
Hand Lever Assembly, Chrome 031046-002 310-46002
Ball Knob, Black 4009819 ** 015-40098 **
Stainless Steel Shift Knob (smooth) CA69051P ** 015-69051 **
Throttle Cable Brake 044386 300-44386
CH5210P
ADJUSTABLE THROTTLEFRICTION
ADJUSTABLEDETENT FEEL
STCH2400P
STBCH2410P
ADJUSTABLE THROTTLEFRICTION
ST (CH2400P) STB (CH2410P):
SINGLE S (CH5210P) TWIN S (CH5200P):
Teleflex Recommends Using
Cables With This Control
CONTROLS - SINGLE FUNCTION
For more information see www.teleflexmarine.com69
TWIN SR (CH5400P):Ideal for single and multiple station boats, SR Twin is rugged and made withthe finest marine grade materials. Removable cover enables easy access to themechanism. Includes adjustable brakes and stops. Accepts universal controlcables. Optional detent kits and neutralsafety switch available. Additionalhardware is required for twin stationuse.
APPLICATION:Single-function control — each levercontrols throttle OR shift. Ideal forinboards, stern drives and outboards,Twin SR controls are suitable for singleor dual stations and can utilize 3300/33Cor 4300/43C type cables. Not suitablefor use with Mercury® and OMC® OEMtype control cables.
FEATURES:• Polished stainless steel cover, marine grade chrome levers and rugged casthanger plate.
• Removable cover enables easy access to the control mechanism.• Adjustable brakes and stops.• Optional neutral safety switch to prevent starting in gear.• Optional shift detent kit (if used in dual stations; use on main station only).• Uses 3300/33C and 4300/43C type cables.• Mechanical advantage - shift 3.10:1/throttle 3.10:1.• Meets/exceeds all applicable industry standards.
SLT (CH5600P):There’s nothing else like it! Patented Self Locking Throttle technology makes theSLT the only control that stops cable creep and works flawlessly in single or inseries multi-station applications. SLT stops unwanted control cable movementwithout the need for cable brakes or other friction devices that cause poor feel atthe lever and negate the performanceadvantages of TFXTREME® cables.Additional hardware is required for twinstation use.
APPLICATION:Single-function control — each levercontrols throttle OR shift. For single ordual stations with single or twin engines(one control per engine per stationutilizing an optional neutral safety switchkit). Uses 3300/33C type universalcontrol cables. Not suitable for use withMercury® and OMC® OEM type controlcables.
FEATURES:• Patented SLT technology prevents throttle creep.Lever stays where it is placed.
• Superior twin station performance.• Polished Stainless Steel levers & dome.• Positive detent for shifts.• Can be user-configured as either Push or Pull to operate throttle and/or shift.• Includes hardware for two 3300/33C type universal control cables.• Easy-access adjustable shift detents/lever stops (under easilyremovable dome).
• Optional neutral safety switch.• Meets/exceeds all applicable industry standards.
Engine Connection Kits(see Connection Kits section)
** Fits most controls with 3/8-24 threaded levers.
Engine Connection Kits(see Connection Kits section)
** Fits most controls with 3/8-24 threaded levers.
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
SLT Top Mount Control CH5600P 118-56000
OPTIONS/ SERVICE ITEMS
DESCRIPTION Mfr. No. ORDER NO.
Optional Neutral Safety Switch CA69009P 015-69009
Cable Attachment Hardware for3300/33C Dual Station & Replacements
CA69022P 015-69022
Ball Knob, Red 4009912 ** 015-40099
Ball Knob, Black 4009819 ** 015-40098
Stainless Steel Throttle Knob (grooved) CA69052P** 015-69052
Stainless Steel Shift Knob (smooth) CA69051P** 015-69051
Replacement Stainless Steel Lever(Fits Teleflex® CH5600 SLT andTwin SR controls only.)
CA69060P 015-69060
ENGINE CONTROLS
DESCRIPTION Mfr. No. ORDER NO.
Twin SR 2-lever control (Old No. 364-69001) CH5400P 118-54000
OPTIONS/ SERVICE ITEMSDESCRIPTION Mfr. No. ORDER NO.
Clutch Detent Kit 036774 300-36774
In-Series Dual Station Kit, 30 Series(2 required for twin lever control)
039490-002 394-90002
In-Series Dual Station Kit,40 Series (2 required for twin)
048501-002 485-01002
Neutral Safety Switch Kit 041117 300-41117
Ball Knob, Red 4009912 ** 015-40099
Ball Knob, Black 4009819 ** 015-40098
Stainless Steel Throttle Knob (grooved) CA69052P** 015-69052
Stainless Steel Shift Knob (smooth) CA69051P** 015-69051
Replacement Stainless Steel Lever(Fits Teleflex® CH5600 SLT andTwin SR controls only.)
CA69060P 015-69060
Mounting Hardware Kit, Twin 060991 300-60991
Replacement Dome Cover, Twin 047682 300-47682
TWIN SRCH5400P
CH5600P
EASY ACCESSUNDER DOME(remove screwnear each lever)
EASY ACCESSUNDER DOME(remove screwnear each lever)
TWIN SR (CH5400P):
SLT (CH5600P):
Teleflex Recommends Using
Cables With This Control
**
**
**
**
**
**
**
**
CONTROLS - SINGLE FUNCTION
For more information see: www.teleflexmarine.com70
OEM DIRECT REPLACEMENT TYPE CABLES:
Mercury®/Mariner® Gen II(2003 to date)
Standard: CC189XX, Premium: CCX189XX Mercury® 4000 series Gen II single lever controls Mercury®/MerCruiser®/Force®
Mercury®/Mariner® type 600A(1965 to date)
Standard: CC179XX, Premium: CCX179XX Mercury®/Mariner® single lever controlsBRP®/OMC®/Johnson®/Evinrude®type 479(1979-date)
Standard: CC205XX, Premium: CCX205XX BRP®/OMC®/Johnson®/Evinrude® type single lever controls BRP®/OMC® enginesBRP®/OMC®/Johnson®/Evinrude®type 400(Pre-1979)
Standard: CC170XX BRP®/OMC®/Johnson®/Evinrude® type twin lever controls BRP®/OMC® engines
Mariner® type 40 HP & below(Pre-1993)
Standard: CC210XX Mercury®/Mariner® single lever controls (1965-date)
Mercury Sport Jet®(90 & early 120 HP),U.S. Marine® L-drive shift cableStandard: CC213XX Mercury®/Mariner® single lever controls (1965-date) Sport Jet® 90/120 & L-Drive
Volvo® engines w/OMC® controlsOMC Turbo Jet®
Premium: CCX214XX (side mount) BRP® /OMC® Controls
UNIVERSAL TYPE CABLES:3300/33C type (Teleflex® 3300CC,Morse® 33C/33C Supreme)Standard: CC172XX/CC230XXMidrange: CC332XXPremium: CCX633XX controls accepting 10-32 cable ends
4300/43 type(heavy duty applications)Premium: 4300BC (bulkhead-clamp): CCX430XXPremium: 4300CC (bulkhead-clamp): CCX433XX controls accepting 1/4-28 cable ends
6400/64 type (heavy duty applications)Premium: 6400CC (bulkhead-clamp): CCX643XX controls accepting 5/16-24 cable ends
PANEL MOUNT TYPE CABLES:Utility(with knob: 018872-00-XXX.0) NLA(with T-handle: 018873-00-XXX.0) NLAUSE CC343XXHas both the round and T-handle knobs
CABLE TYPE CONTROL END FITS ENGINE END FITS
Engines and connection kits that accept a10-32 threaded endMay require connection kit from Teleflex or Engine Manufacturer
Engines and connection kits that accept a 1/4-28 threaded end
Engines and connection kits that accept a 5/16-24 threaded end
Volvo® I/O, Turbo, SX; new-gen BRP®/OMC drives; TurboJet® gate cable
Mercury®, most MerCruiser®,most Mariner® & late model Force®
Vernier(micro-adjustable; CC345XX + 317310 Control Head
Mariner® pre-1993 low engines (40 HP & below)
(Clamp End)
(Clamp End)
(Bulkhead End)
(Bulkhead End)
CONTROL CABLES OVERVIEW
For more information see: www.teleflexmarine.com71
CONTROL CABLES - CROSS REFERENCE
Typical Outboard Cable Routing
Typical Stern Drive (I/O) or Inboard Cable Routing
FOUR APPLICATION TYPES:OEM Replacement TypeTeleflex offers a direct replacement cable for almost every engine manufacturer's control.Most of our OEM type cables are available in both standard & versions.Universal (3300/33C) TypeUniversal (or 3300/33C) type throttle/shift control cables are direct replacements for many boats using aftermarket controls or most enginemanufacturer's controls with the correct adapter kit. Universal 3300/33C cables can be connected to most engines. These cables are offered in all threegrades: standard, midrange & .Universal (4300/43 6400/64) TypesHeavy duty universal type control cables are available in versions only. These are drop-in replacements for 43C, 43BC, 64C & 64BC &other similar cables.Jet Boat Gate Control CablesThree styles of drive-specific jet boat gate control cables are available, for Mercury Sport Jet® 90 & early 120s, Sport Jet 175s & OMC Turbo Jet®.Our 43BC cable is used on most other popular jet drives. Replacement throttle control cables are generally an OEM or 3300/33CUniversal TypeTeleflex Marine control cables meet OEM specifications for fit, function, reliability and quality. They are built with marine-grade, corrosion-resistantmaterials and feature either premium core construction or Lubri-Core™ lifetime internal lubrication.
72
THREE PERFORMANCE GRADES:control cables can be used in any boat. They are by far the best choice for long runs, twin stations or other difficult routings with
multiple cable bends. Midrange cables are recommended for somewhat longer cable routings and heavier use than their standard counterparts.Standard cables are suitable for most applications with short, simple cable routings.
Teleflex Marine makes engine control cables for a wide variety of applications. We recommend their use with our controls as well as inengine manufacturers’ control systems. We offer three grades of cable: Standard, Midrange & (PREMIUM)
FOR A NEW INSTALLATIONMeasure cable routing path from control head attachmentpoint to engine connection, as follows:
Outboards
Measure from control along unobstructed cable routing tocenter of outboard. Add four feet to allow for loop which
provides unrestricted engine movement. Round up to the nextfoot and order required cable part number. (Last two digits ofcable part number equal cable length in feet.)
Inboard & Stern Drives
Measure from control along unobstructed cable routing to shiftand/or throttle connection. Round this dimension up to the
next foot and order required cable part number.(Last two digits of cable part number equal cable length in feet.)
FOR EXAMPLE: Part Number CCX63320 = 20 ft. CCX633 Control Cables orMorse® Part Number 032377-03-240.0 = 20 ft. 33C Control Cable
For more information see:www.teleflexmarine.com
CONTROL CABLELENGTH IN FEET
CONTROL CABLE MEASURING GUIDE
HOW TO MEASURE CONTROL CABLES "Measure twice. Order once”
WHAT TO CONSIDER WHEN SELECTING CABLES
FOR REPLACEMENT OF EXISTING CABLESIf you removed the old cable, measure for replacement cable as follows:Measure from tip to tip and round up to the next foot, if necessary (aftermarket cables are sold in foot increments).The control cable part number contains its length Teleflex cables are usually listed as CC???XX, where XX=length in feet, and ??? is the cable series.
73For more information see: www.teleflexmarine.com
Control End Engine End
Universal type cables are designed to fit aftermarket engine controls as well as OEM units from BMW®, Chrysler,® Honda®, Nissan®,Suzuki®, Volvo®, Yamaha® and others. Several versions of the 3300/33C type are available,including a model.
versions of the 3300/33C cables are offered for demanding applications in which a smooth feel at the control is essential.
Features:• Cables can use the existing connection components.• Stainless steel and brass fittings.• Standard cables use stainless steel Lubri-Core™ core wire for smoothoperation and long life. (8" minimum bend radius.)
• Midrange cables use a heavier jacket and a stainless steelLubri-Core™. (8" minimum bend radius for Lubri-Core construction)
• Premium 3300/33C cables have a heavy jacket and thesplined, coated core element for maximum smoothness with minimallost motion. (4" min. bend radius.)
• Black HDPE outer casing for durability and best resistance to UVand chemicals.
NOTE: * CC230 Standard Series replaces CC172 Standard Series
CC230*StandardSeries
CC332 / 33CMidrangeSeries
CCX633
Series
Length ORDER NO. ORDER NO. ORDER NO.
5 ft.. Use #017-63305-X Use #017-63305-X 017-63305-X
6 ft. Use #017-63306-X Use #017-63306-X 017-63306-X
7 ft. Use #017-63307-X Use #017-63307-X 017-63307-X
8 ft. Use #017-63308-X Use #017-63308-X 017-63308-X
9 ft. Use #017-63309-X Use #017-63309-X 017-63309-X
10 ft. 017-23010 017-33210 017-63310-X
11 ft. 017-23011 017-33211 017-63311-X
12 ft. 017-23012 017-33212 017-63312-X
13 ft. 017-23013 017-33213 017-63313-X
14 ft. 017-23014 017-33214 017-63314-X
15 ft. 017-23015 017-33215 017-63315-X
16 ft. 017-23016 017-33216 017-63316-X
17 ft. 017-23017 017-33217 017-63317-X
18 ft. 017-23018 017-33218 017-63318-X
19 ft. 017-23019 017-33219 017-63319-X
20 ft. 017-23020 017-33220 017-63320-X
21 ft. Use #017-63321-X Use #017-63321-X 017-63321-X
22 ft. 017-23022 017-33222 017-63322-X
CC230*StandardSeries
CC332 / 33CMidrangeSeries
CCX633
Series
Length ORDER NO. ORDER NO. ORDER NO.
23 ft. Use #017-63323-X Use #017-63323-X 017-63323-X
24 ft. 017-23024 017-33224 017-63324-X
25 ft. Use #017-63325-X Use #017-63325-X 017-63325-X
26 ft. Use #017-63326-X Use #017-63326-X 017-63326-X
27 ft. Use #017-63327-X Use #017-63327-X 017-63327-X
28 ft. Use #017-63328-X Use #017-63328-X 017-63328-X
29 ft. Use #017-63329-X Use #017-63329-X 017-63329-X
30 ft. Use #017-63330-X Use #017-63330-X 017-63330-X
32 ft. Use #017-63332-X Use #017-63332-X 017-63332-X
34 ft. Use #017-63334-X Use #017-63334-X 017-63334-X
36 ft. Use #017-63336-X Use #017-63336-X 017-63336-X
38 ft. Use #017-63338-X Use #017-63338-X 017-63338-X
40 ft. Use #017-63340-X Use #017-63340-X 017-63340-X
42 ft. Use #017-63342-X Use #017-63342-X 017-63342-X
44 ft. Use #017-63344-X Use #017-63344-X 017-63344-X
46 ft. Use #017-63346-X Use #017-63346-X 017-63346-X
48 ft. Use #017-63348-X Use #017-63348-X 017-63348-X
50 ft. Use #017-63350-X Use #017-63350-X 017-63350-X
Cable has a 10-32 threaded terminal & a clamp-type fitting at each end. 3" nominal travel.
Oil Tempered Lay Wires for Superior Strength& Performance
THE CORE DIFFERENCE:.34" Super Tough HDPE jacket for Ultimate Protection against the Elements
Long Wearing HDPE Liner:Ultra Smooth and Lubed for Life.
UNIQUE SPLINEDCORE!
CONTROL CABLES
UNIVERSAL 3300/33C APPLICATIONS
33C Cable (Midrange) CC332 XX
33C Cable (Premium) CCX633 XX
3300 Cable (Standard) CC230 XX
Cable has a 10-32 threaded terminal & a clamp-type fitting at each end. 3" nominal travel.
Cable has a 10-32 threaded terminal & a clamp-type fitting at each end. 4" nominal travel.
3300/33C TYPES (10-32 ENDS)
74
CC179STANDARDSeries
CCX179
Series
Length ORDER NO. ORDER NO.
6 ft. Use #017-17906-X 017-17906-X
7 ft. Use #017-17907-X 017-17907-X
8 ft. Use #017-17908-X 017-17908-X
9 ft. Use #017-17909-X 017-17909-X
10 ft. 017-17910 017-17910-X
11 ft. 017-17911 017-17911-X
12 ft. 017-17912 017-17912-X
13 ft. 017-17913 017-17913-X
14 ft. 017-17914 017-17914-X
15 ft. 017-17915 017-17915-X
16 ft. 017-17916 017-17916-X
17 ft. 017-17917 017-17917-X
18 ft. 017-17918 017-17918-X
19 ft. 017-17919 017-17919-X
20 ft. 017-17920 017-17920-X
22 ft. 017-17922 017-17922-X
24 ft. 017-17924 017-17924-X
26 ft. Use #017-17926-X 017-17926-X
28 ft. Use #017-17928-X 017-17928-X
30 ft. Use #017-17930-X 017-17930-X
32 ft. Use #017-17932-X 017-17932-X
CC189STANDARDSeries
CCX189
Series
Length ORDER NO. ORDER NO.
10 ft. 017-18910 017-18910-X
11 ft. 017-18911 017-18911-X
12 ft. 017-18912 017-18912-X
13 ft. 017-18913 017-18913-X
14 ft. 017-18914 017-18914-X
15 ft. 017-18915 017-18915-X
16 ft. 017-18916 017-18916-X
17 ft. 017-18917 017-18917-X
18 ft. 017-18918 017-18918-X
19 ft. 017-18919 017-18919-X
20 ft. 017-18920 017-18920-X
Mercury 600A type (Premium) CCX179 XX
Mercury 600A type (Standard) CC179 XX
Mariner®/Mercury®/MerCruiser® and other engines using Mercury2003-date 4000 series controls. CCX189XX is a cable.
Length ORDER NO.
10 ft. 017-21010
11 ft. 017-21011
12 ft. 017-21012
13 ft. 017-21013
14 ft. 017-21014
15 ft. 017-21015
16 ft. 017-21016
18 ft. 017-21018
Length ORDER NO.
10 ft. 017-21310
11 ft. 017-21311
12 ft. 017-21312
13 ft. 017-21313
14 ft. 017-21314
15 ft. 017-21315
16 ft. 017-21316
CC210STANDARD Series CC213
STANDARD Series
U.S. Marine “L-Drive” engineswith original equipment controls.Drop-in replacement for“L-Drive” shift cables.
Mariner® (Pre-1993 40 HP & less)with Mariner/Mercury controls.
For more information see: www.teleflexmarine.com
MERCURY/MARINER/FORCE/U.S. MARINE
OEM CABLE APPLICATIONS
CC210
CC213
CONTROL CABLES
US Marine® L-Drive shift cable (Standard) CC213 XX
Mariner 630 type (Standard) CC210 XX
OEM direct-replacement type cables are designed to fit BRP® Mercury®, Mariner® , OMC®, Volvo® and similar OEM engine control heads whichuse a proprietary control cable connection. versions of the most popular cables are offered for demanding applications in which asmooth feel at the control is essential.
For These Controls:Mercury®, MerCruiser®, Mariner®, Force®, OMC®, Evinrude®, Johnson®,Volvo®, Teleflex Osprey Series CH1700, CH7500, CH7600, and CH7800.Features:• Drop-in replacement cables are engineered as replacements fororiginal equipment cables.
• Cables use the existing connection components.• Stainless steel and brass fittings.• Standard cables use stainless steel Lubri-Core™ core wire for smoothoperation and long life. (8" minimum bend radius.)
• Premium cables have a heavy jacket and the splined, coated core elementfor maximum smoothness with minimal lost motion. (4" min. bend radius.)
• Black or red HDPE outer casing for durability and best resistance to UV and chemicals.
Mercury Gen II type (Premium) CCX189 XX
Mercury Gen II type (Standard) CC189 XX
Mariner®/Mercury®/MerCruiser® (1965-date); Force® (1993-date) with Mercury controls.All Mariner engines with Mercury/Mariner controls (except pre-1993 40 HP & lower models).All 1993-date Force (US Marine) with Force/US Marine/Mercury controls.CCX179XX is a cable.
CC205Standard Series
CCX205
Series
Length ORDER NO. ORDER NO.
6 ft. Use #017-20506-X 017-20506-X
7 ft. Use #017-20507-X 017-20507-X
8 ft. Use #017-20508-X 017-20508-X
9 ft. Use #017-20509-X 017-20509-X
10 ft. 017-20510 017-20510-X
11 ft. 017-20511 017-20511-X
12 ft. 017-20512 017-20512-X
13 ft. 017-20513 017-20513-X
14 ft. 017-20514 017-20514-X
15 ft. 017-20515 017-20515-X
16 ft. 017-20516 017-20516-X
CC205Standard Series
CCX205
Series
Length ORDER NO. ORDER NO.
17 ft. 017-20517 017-20517-X
18 ft. 017-20518 017-20518-X
19 ft. 017-20519 017-20519-X
20 ft. 017-20520 017-20520-X
22 ft. 017-20522 017-20522-X
24 ft. 017-20524 017-20524-X
26 ft. Use #017-20526-X 017-20526-X
28 ft. Use #017-20528-X 017-20528-X
30 ft. Use #017-20530-X 017-20530-X
32 ft. Use #017-20532-X 017-20532-X
34 ft. Use #017-20534-X 017-20534-X
1979-date BRP®/OMC®/Johnson®/Evinrude®/Gale® with BRP/OMC controls. Exceeds engine manufacturer’s specifications.CC736 uses Supreme type coated core wire; CCX205XX is a cable
75
BRP, OMC, JOHNSON, EVINRUDE, VOLVO/OMC
Volvo/OMC cable (Premium)Volvo engines usingBRP/OMC side mount controls.
CCX214 XX
Length ORDER NO.
10 ft. 017-21410-X
11 ft. 017-21411-X
12 ft. 017-21412-X
13 ft. 017-21413-X
14 ft. 017-21414-X
15 ft. 017-21415-X
CC170STANDARD Series
Length ORDER NO.
6 ft. 017-17006
7 ft. 017-17007
8 ft. 017-17008
9 ft. 017-17009
10 ft. 017-17010
11 ft. 017-17011
12 ft. 017-17012
13 ft. 017-17013
14 ft. 017-17014
CC170STANDARD Series
Length ORDER NO.
15 ft. 017-17015
16 ft. 017-17016
17 ft. 017-17017
18 ft. 017-17018
19 ft. 017-17019
20 ft. 017-17020
22 ft. 017-17022
24 ft. 017-17024
Pre-1979 OMC®/Johnson®/Evinrude® with BRP/OMC controls.Exceeds engine manufacturer’s specifications.
Length ORDER NO.
16 ft. 017-21416-X
17 ft. 017-21417-X
18 ft. 017-21418-X
19 ft. 017-21419-X
20 ft. 017-21420-X
479 type (Premium) CCX205 XX
479 type (Standard) CC205 XX
479 type (Standard) CC170 XX
For more information see: www.teleflexmarine.com
OEM CABLE APPLICATIONS
CONTROL CABLES
CCX214
Series
CCX214
Series
76
Length ORDER NO.
10 ft. 017-21310
11 ft. 017-21311
12 ft. 017-21312
13 ft. 017-21313
14 ft. 017-21314
15 ft. 017-21315
16 ft. 017-21316
CC213STANDARDSeries
MERCURY GEN II® - CONTROL CABLES- (Mfr. No. CCX 189 XX)Designed specifically to be used with the new Mercury 4000 series controls
Performance Advantage:Engineered to significantly reduce or eliminate cable “Wig-Wag” and improve the feel ofthe Mercury 4000 Series Controls
Features:• Swivel Joint or Swivel Point: New nickel plated brass swivel tube• Shift & Throttle Effort: Less effort• Cable “Wig-Wag”: Reduced and/or Eliminated
Control End
Control End
MERCURY SPORT JET® - REVERSE GATE CONTROL CABLES90 & EARLY 120 HP: SPORT JET 90 & EARLY 120 (Standard)- (Mfr. No. CC213 XX)For Mercury Sport Jets with controls which accept a cable with 10-32 threaded ends.Drop-in replacement cable; uses existing connection components.
US MARINE® L-DRIVE SHIFT CABLES (STANDARD)- (Mfr. No. CC213 XX)U.S. Marine “L-Drive” engines with original equipment controls.Drop-in replacement for “L-Drive” shift cables.
Control End
Engine End
CC189STANDARDSeries
CCX189
Series
Length ORDER NO. ORDER NO.
10 ft. 017-18910 017-18910-X
11 ft. 017-18911 017-18911-X
12 ft. 017-18912 017-18912-X
13 ft. 017-18913 017-18913-X
14 ft. 017-18914 017-18914-X
15 ft. 017-18915 017-18915-X
16 ft. 017-18916 017-18916-X
17 ft. 017-18917 017-18917-X
18 ft. 017-18918 017-18918-X
19 ft. 017-18919 017-18919-X
20 ft. 017-18920 017-18920-X
Length ORDER NO.
10 ft. 017-21410-X
11 ft. 017-21411-X
12 ft. 017-21412-X
13 ft. 017-21413-X
14 ft. 017-21414-X
15 ft. 017-21415-X
16 ft. 017-21416-X
17 ft. 017-21417-X
18 ft. 017-21418-X
19 ft. 017-21419-X
20 ft. 017-21420-X
VOLVO/OMC CABLES- (Mfr. No. CCX 214 XX)Volvo engines using OMC side mount controls.
OMC TURBO JET®- REVERSE GATE CONTROL CABLESTURBO JET CABLE - (Mfr. No. CCX 214 XX)For OMC Turbo Jets with OMC side mount controls thataccept OMC “snap in” O.E.M. type cable.Drop-in replacement cable; uses existing connection components.
CCX214
Series
Engine End
CONTROL CABLES
For more information see: www.teleflexmarine.com
Engine End
6400/64 TYPES (5/16-24 ENDS)
Engine End
Control End
77
Length ORDER NO.
10 ft. 017-43310-X
11 ft. 017-43311-X
12 ft. 017-43312-X
13 ft. 017-43313-X
14 ft. 017-43314-X
15 ft. 017-43315-X
16 ft. 017-43316-X
17 ft. 017-43317-X
18 ft. 017-43318-X
19 ft. 017-43319-X
20 ft. 017-43320-X
21 ft. 017-43321-X
23 ft. 017-43323-X
Length ORDER NO.
5 ft. 017-64305-X
6 ft. 017-64306-X
7 ft. 017-64307-X
8 ft. 017-64308-X
9 ft. 017-64309-X
Length ORDER NO.
10 ft. 017-64310-X
11 ft. 017-64311-X
12 ft. 017-64312-X
13 ft. 017-64313-X
14 ft. 017-64314-X
Cable has one bulkhead and one clampfitting. There is a 1/4-28 threadedterminal at each end. 3" nominal travel.5" minimum bend radius.
4300/43 TYPES (1/4-28 ENDS)
Cable has a 1/4-28 threadedterminal and a clamp-type fitting ateach end. 3" nominal travel.5" minimum bend radius.
Cable has a 5/16-24 threaded terminal and a clamp-type fitting at each end.4" nominal travel. 8" minimum bend radius.
For more information see: www.teleflexmarine.com
CCX433
Series
Engine End
Control End
CCX643
Series
CCX643
Series
Length ORDER NO.
10 ft. 017-43010-X
12 ft. 017-43012-X
13 ft. 017-43013-X
14 ft. 017-43014-X
15 ft. 017-43015-X
16 ft. 017-43016-X
18 ft. 017-43018-X
20 ft. 017-43020-X
CCX430
Series
CONTROL CABLES
6400 CC Cable CCX643 XX
4300 CC Cable CCX433 XX
UNIVERSAL 4300/43 & 6400/64 APPLICATIONS
Engine End
Control End
4300 BC Cable CCX430 XX
Features:• 4300/43 type cables have stainless steel conduit fittings. (5" minimum bend radius.)• 6400/64 type cables have stainless steel conduit fittings. (8" minimum bend radius.)• Black HDPE outer casing for durability and best resistance to UV and chemicals.• Cables meet/exceed all applicable industry standards.
Universal type cables are designed to fit aftermarket engine controls as well as OEM units from BMW®,Chrysler®, Honda®, Nissan®, Suzuki®, Volvo®, Yamaha® and others.For heavy duty applications, Teleflex offers 4300/43 and 6400/64 series cables.
For more information see: www.teleflexmarine.com78
The vernier cable requires ordering 2 part numbers: A Vernier CableHead (which includes knob, button, panel body and fine adjustmentmechanism) PLUS a Cable, which attaches to the Cable Head.
CC345 Series Vernier Cable
Length Mfr.No. ORDER NO.
10 ft. CC34510 017-34510
20 ft. CC34520 017-34520
CC343 Series Cable w/Knob& T-Handle
Length Mfr.No. ORDER NO.
10 ft. CC34310 017-34310
20 ft. CC34320 017-34320
UTILITY CABLE:An easy-to-install, easy to operate flexible push-pull cable forremote control of choke, throttle, shut off, fuel valves,vents and many other applications.• Available with both Knob and T-handle.• Solid stainless steel core wire resists corrosion, moves easilyin HDPE liner.• HDPE outer casing for durability and best resistance toUV and chemicals.
VERNIER CABLE:Great for throttles or other applications where precise control isdesired. Push the button for fast easy setting of approximateposition, then turn the knob for micro adjustment.• Positive, adjustable brake maintains settings regardless ofvibration or governor back pressure.• Uses standard Teleflex Marine throttle connection kits.• HDPE outer casing for durability and best resistance toUV and chemicals.
FOR USE ON:Remote control of choke, governor, throttle, fuel valves, ventsand other applications.
UTILITY: WITH KNOB AND T-HANDLE
VERNIER
Description Mfr. No. ORDER NO.
Bulkhead Adapter Kit 300673 300-67300
Clamp Adapter Kit 302485 302-48500
Description Mfr. No. ORDER NO.
Vernier Cable Head Only 317310 317-31000
CONDUIT FITTING KITS:Use these (formerly known as Hub Adapter Kits) to adapt utilitycables to mount in either bulkhead or clamp type applications.
DC CONTROL:Converts standard 3300/33C cable into a utility control. Installthrough a panel or mount nearly anywhere with optional bracket.
Description Mfr. No. ORDER NO.
DC Control 301916 301-91600
Mounting Bracket, SST 048210 300-48210
Uses 3300/33C type Cable
BULKHEAD ADAPTER KIT300673
MOUNTING BRACKET048210
CLAMP ADAPTERKIT
302485
3300 CABLE
Utility with T-Handle
Utility with Knob
Vernier Cable
“DC CONTROL”(Shown with 3300Ctype cable attached)
301916
Cable Head
Cable
UTILITY & VERNIER APPLICATIONS
UTILITY/VERNIER CABLES
79
Description Mfr. No. ORDER NO.
Merc/Mariner Control Adapter - 3300/33C cable 301074 301-07400
OMC/J/E Control Adapter - 3300/33C cable 304939 304-93900
OEM Control-Specific Connection Kits for 3300/33C cables
CONTROL CONNECTION KITS
(NOTE: QR type has external spring over ball receptor; ST does not.)
ENGINE CONNECTION KITS
Engine-Specific Connection Kits for 1973-1978 OMC OEM (“400” type) cables with bare wire ends:
Description Mfr. No. ORDER NO.
Evinrude/Johnson O/B Kit (35HP & less) CA27208P 015-27208
Evinrude/Johnson O/B Kit (over 35HP) CA27247P 015-27247
OMC Stern Drive Kit (all) CA27247P 015-27247
(NOTE: Included clip is not used on stern drives.)
Engine-Specific Connection Kits for 3300/33C cables
Description Mfr. No. ORDER NO.
Evinrude/Johnson O/B Kit (1979-date) CA27320P 015-27320
Evinrude/Johnson O/B Kit (pre-1979) CA27321P 015-27321
Evinrude/Johnson O/B Kit 301729 301-72900*
Mercury Outboard Kit (1965-date) CA27319P 015-27319
Mercury Stern Drive Kit (all) CA27319P 015-27319
Mercury Inboard Kit (all) CA27373P 015-27373
Mercury Inboard Kit (all) 302123 302-12300
OMC Stern Drive Kit (all) CA27320P 015-27320
Universal Ball Joint Kits
Description Mfr. No. ORDER NO.
Univ. 3300/33C Ball Joint (1/4-28) (1) CA37701P 015-37701
Univ. 3300/33C Ball Joint (10-32) QR (1) 031799-001 300-31799
Univ. 3300/33C Ball Joint (1/4-28) QR (1) 031126 300-31126
Univ. 3300/33C Ball Joint (5/16-24) QR (1) 035242 300-35242
Univ. 4300/43 Ball Joint (1/4-28) (1) CA28014P 015-28014
Univ. 4300/43 Ball Joint (1/4-28) QR (1) 029104 300-29104
Univ. 4300/43 Ball Joint (5/16-24) QR (1) 032267 300-32267
Univ. 6400/64 Ball Joint (5/16-24) (1) CA28021P 015-28021
Univ. 6400/64 Ball Joint (5/16-24) QR (1) 029108 300-29108
Univ. 6400/64 Ball Joint (5/16-24) ST (1) 038491 300-38491
CA27320P
Teleflex TypeCA37701P
ST Type038491
QR Type029104
CA27247P
301074
CA27373P
304939
*Adapts 33C or 33C Supreme cables for use with Evinrude/Johnson 1978-date 55-235 HP, 1986 20 HP and up.20, 25 and 30 HP motors may need OMC kit 397488 if motor does not already have it installed.
For more information see: www.teleflexmarine.com
CONTROL CABLES - CONNECTION KITS
For more information see:www.teleflexmarine.com
80
OTHER UNIVERSAL CABLE CONNECTION KITS
PIVOTS - 3300/33C SERIES:
A B C D E Mfr. No. ORDER NO.
in 3/16 7/16 3/8 9/64 11/16mm 4.8 11.1 9.5 3.6 17.5 045583 300-45583
in 1/4 7/16 21/64 9/64 5/8mm 6.4 11.1 8.3 3.6 15.9 031029 300-31029
in 1/4 7/16 3/8 .191 23/32mm 6.4 11.1 9.5 4.9 18.3 031539 300-31539
in 1/4 7/16 21/64 .295 25/32mm 6.4 11.1 8.3 7.5 19.8 032392 300-32392
in 1/4 7/16 3/8 .316 15/16mm 6.4 11.1 9.5 8.0 23.8 039890 300-39890
in 5/16 7/16 3/8 13/32 1-1/16mm 7.9 11.1 9.5 10.3 27.0 037691 300-37691
DESCRIPTION Mfr. No. ORDER NO.
Univ. 3300/33C Clevis (10-32, 3/16” pin) (1) 031800 300-31800
Univ. 3300/33C Clevis (10-32, 1/4” pin) (1) 031125 300-31125
Univ. 3300/33C Clevis (10-32, 5/16” pin) (1) 033395 300-33395
Univ. 4300/43 Clevis (1/4-28, 1/4” pin) (1) 029025 300-29025
Univ. 4300/43 Clevis (1/4-28, 5/16” pin) (1) 042212 300-42212
Univ. 4300/43 Clevis (1/4-28, 5/8” pin) (1) 045985 300-45985
Univ. 6400/64 Clevis (5/16-24, 5/16” pin) (1) 029132-001 300-29132
Univ. 6400/64 Clevis (5/16-24, 3/8” pin) (1) 042034 300-42034
For two cables, except where otherwise noted.(1) = for use with one cable.
PIVOTS - 4300/43C SERIES:
A B C D E Mfr. No. ORDER NO.
in 1/4 1/2 7/16 9/64 3/4mm 6.4 12.7 11.1 3.6 19.1
039110 300-39110
in 1/4 1/2 1/2 13/64 7/8mm 6.4 12.7 12.7 5.2 22.2
031537 300-31537
in 1/4 1/2 1/2 17/64 15/16mm 6.4 12.7 12.7 6.7 23.8
036361 300-36361
in 15/16 1/2 9/16 9/64 29/32mm 7.9 12.7 14.3 3.6 23.0
045199 300-45199
in 3/8 9/16 1/2 25/64 13/16mm 9.5 14.3 12.7 9.9 20.6
042419 300-42419
UNIVERSAL CLEVIS KITS
CABLE CONNECTION KITS
CONTROL CABLES - CONNECTION KITS
DESCRIPTION Mfr. No. ORDER NO.
3300/33C Series:Eye Terminal (Metal) – 3300 (10-32, 5/16” pin) (1) 317413 303-17413
Eye Terminal (Red Nylon) – 3300 (10-32, 5/16” pin) (1) 300646 300-64600
4300/43 Series:Eye Terminal – 4300/43 (1/4-28, 5/16” pin) (1) 041134 300-41134
6400/64 Series:Pin for Eye Terminal (1.5”, 5/16” dia.) (pin only) 300965 300-96500
Terminal Pin Kit (300965, ring, nut, washer) 301456 301-45600
Univ. 3300/33C Clamp & Shim Kit (1) CA28020P 015-28020
Univ. 3300/33C Clamp (1) 032010 300-32010
3300/33C Clamp (for bare conduit) (1) 037664 300-37664
3300/33C Clamp (for bare cond. or ftg.) (1) 031509 300-31509
3300/33C Clamp Shim for 032010 (1) 035777 300-35777
Univ. 4300/43 Clamp & Shim Kit (1) CA28018P 015-28018
Univ. 4300/43 Clamp – 2 Holes (1) 031532 300-31532
Heavy Duty 4300/43 Clamp – 4 Holes (1) 021227 300-21227
4300/43 Clamp Shim for 031532 & 021227 (1) 031538 300-31538
(NOTE: 2 shims required for each 021227 clamp.)
Univ. 6400/64 Clamp & Shim Kit (1) CA28019P 015-28019
Heavy Duty 6400/64 Clamp – 4 Holes (1) 036733 300-36733
6400/64 Clamp Shim (1) 031538 300-31538
Univ. 3300/33C Inboard Connection Kit (2)(Above contains: (2) CA37701P Ball Joints & (2)CA35074P Brackets.)
CA27024P015-27024
Univ. 3300/33C Inboard Connection Bracket (1)(Old Morse description: “Cable Hook Clip – Single” )
036174 300-36174
Univ. 3300/33C Inboard Connection Bracket (1)(Old Morse description: “Cable Clip – 30 Series Only” )
031419 300-31419
Univ. 3300/33C Cable Clip DS(Old Morse description: “Cable Hook Clip – Dual”)
035531 300-35531
For more information see: www.teleflexmarine.com81
EYE TERMINAL317413
OTHER CABLE KITS/Accessories
OTHER UNIVERSAL CABLE CONNECTION KITS, continued
EYE TERMINAL PIN300965
CLAMP032010
CLAMP & SHIM KITCA28018P
036174031419
Anti-Vibration Cable Mount – 3300/33C 294200-001 294-20001
Anti-Vibration Cable Mount – 4300/43 294201-001 294-20101
Stop Collar 3300/33C 037693 300-37693
Cable Brake 3300/33C, 4300/43 & 6400/64 Cables 044386 300-44386 STOP COLLAR 037693 CABLE BRAKE 044386
CA27024P
ANTI-VIBRATION CABLE MOUNT
035531
CONTROL CABLES - CONNECTION KITS
PRE-ENGINEERED CLUTCH & THROTTLE KITS - BY ENGINE APPLICATION
82
300673
302485
036680
Connection Kit –3300/33C Cable 036680 300-36680
Connection Kit – 4300/43 Cable 040773 300-40773
Connection Kit – Dual Station 3300/33C (Twin Disc) 042577 300-42577
Clutch Kit – Twin Disc (right) 063696 300-63696
Throttle Kit –3300/33C Cable (Cummins) 300580 300-58000
Adapter Kit –4300/43 Cable (Cummins, GM,Borg-Warner, Twin Disc) 300580 300-58000
Bulkhead Adapter Kit – Panel Cables 300673 300-67300
Clamp Adapter Kit – Panel Cables 302485 302-48500
Description Mfr. No. ORDER NO.
Conduit Fitting [Hub] Adapter Kits for Panel/Utility Cables
All-Purpose Clutch & Throttle Kits – BY PART NUMBER
For Single Station 3300/33C CablesCaterpillar 334, 3304 & 3306 036680 300-36680
Caterpillar 343, 3406 & 3408 036680 300-36680
Cummins (all with MVSGOV) 036680 300-36680
Cummins (V, VT, KT, KTA 1975-up) 300580 300-58000
GM (2, 3 & 4-53 w/left & right hand gov.) 036680 300-36680
GM (GV-53 rear & front entry) 036680 300-36680
GM (6 & 8V-71 front entry shutdown kit) 036680 300-36680
Universal (Atomic 4) 036680 300-36680
Universal (Atomic 1&2 63C clutch & 33C throttle) 036680 300-36680
For Dual Station 4300/43C CablesCaterpillar 334, 3304 & 3306 036680 300-36680
Caterpillar 343, 3406 & 3408 036680 300-36680
Cummins (all with MVSGOV) 036680 300-36680
Cummins (V, VT, KT, KTA 1975-up) 300580 300-58000
GM (2, 3 & 4-53 w/left & right hand gov.) 036680 300-36680
GM (GV-53 rear & front entry) 036680 300-36680
GM (6 & 8V-71 front entry shutdown kit) 036680 300-36680
Universal (Atomic 4) 036680 300-36680
Universal (Atomic 1&2 63C clutch & 33C throttle) 036680 300-36680
To convert from 3300/33C Dual Station to 4300/43C Dual Station, addCaterpillar 334, 3304 & 3306 040773 300-40773
Caterpillar 343, 3406 & 3408 040773 300-40773
Cummins (all with MVSGOV) 040773 300-40773
036680 300580
036680 300580
040773 300665
For two cables, except where otherwise noted.(1) = for use with one cable.
For more information see www.teleflexmarine.com
040773
(Listing continued on next page)
CONTROL CABLES - CONNECTION KITS
83
040773 300665
For Dual Station 3300/33C CablesCapital (12400, 2, 3 & 4 HD & HE) 036680 300-36680
Paragon (HF-7) 036680 300-36680
Twin Disc (MG, 508, 509, 510, 510A, 512) 042577 300-42577
Twin Disc (514C, 514CHP, 518, 521, 527) 042577 300-42577
Twin Disc (530 & 540) 042577 300-42577
Twin Disc (MG502, 506 & 507) 063696 300-63696
For Dual Station 4300/43C Cables
Borg-Warner (70, 71 & 72 inline-red gear) 300665 300-66500
Borg-Warner (71C & 72C drop center) 300665 300-66500
Capital (12400, 2, 3 & 4 HD & HE) 040773 300-40773
Paragon (HF-7) 040773 300-40773
Twin Disc (MG, 508, 509, 510, 510A, 512) 300665 300-66500
Twin Disc (514C, 514CHP, 518, 521, 527) 300665 300-66500
Twin Disc (530 & 540) 300665 300-66500
Twin Disc (MG502, 506 & 507) 300665 300-66500
To convert from 3300/33C Dual Station to 4300/43C Dual Station, add
Capital (12400, 2, 3 & 4 HD & HE) 036680 300-36680
Paragon (HF-7) 036680 300-36680
PRE-ENGINEERED CLUTCH & THROTTLE KITS - BY ENGINE APPLICATION (Continued)
Cummins (V, VT, KT, KTA 1975-up) 300665 300-66500
GM (3,4 & 6-71 w/var. spd. Gov.) 300665 300-66500
GM (6, 8 & 12 V-71, 6 & 8 V-92 w/v.s.g.) 300665 300-66500
GM (2, 3 & 4-53 w/left & right hand gov.) 040773 300-40773
GM (GV-53 rear & front entry) 040773 300-40773
GM (6 & 8V-71 front entry shutdown kit) 040773 300-40773
Universal (Atomic 4) 040773 300-40773
Universal (Atomic 1&2 63C clutch & 33C throttle) 040773 300-40773
For two cables, except where otherwise noted.(1) = for use with one cable.
036680 301474
036680 301474
040773 300665
For more information see www.teleflexmarine.com
Description Mfr. No. ORDER NO.
042577
PRE-ENGINEERED CLUTCH & THROTTLE KITS - BY TRANSMISSION
To convert from 3300/33C Dual Station to 4300/43C Dual Station, add
CONTROL CABLES - CONNECTION KITS
For more information see www.uflexusa.com84
Features:
• Enables easy and safe shifting by preventing accidental gearengagement unless engine is idling• Can be installed horizontally or vertically, on the starboard or portside of the boat• The lever assembly is made of painted marine aluminum• Provided with a brake tension release system adjustablefrom outside• Pull-out handle disengages shift for warm-up• Neutral safety switch # 351-00012 (Mfr. No. X12)prevents in-gear starting• All models are provided with positive lock-in neutral to preventaccidental gear engagement• Model B184 & B184 Merc. are provided with a power trim switchconveniently located in the handle grip that enables easytilting of the engine• For use with all Teleflex 3300 Type, 33C and 33C Supreme enginecontrol cables. Or C2, C8, CØ Ultraflex engine control cables• For Mercury Type cable # 351-00035 (Mfr. No. K35) kit is required,except for # 762-01841 (B184 Merc.) control.
Features:
• Enables easy and safe shifting by preventing accidental gearengagement unless engine is idling• Can be installed horizontally or vertically, on the starboard or portside of the boat• Made of painted marine aluminum• Pull-out handle disengages shift for warm-up• Neutral safety switch # 351-00012 (Mfr. No. X12) preventsin-gear starting• Provided with a positive lock-in neutral to prevent accidental gearengagement• For use with all Teleflex 3300 Type, 33C, and 33C Supreme enginecontrol cables. Or Ultraflex C2, C8, CØ engine control cables.Note: Current OMC Type cable could be used with this controlwith # 351-00051 (Mfr. No. K51) connection kit for the motor end.• For Mercury Type cable # 351-00035 ( Mfr. No. K35) connection kitis required for the control.
B90Black finish with positive lock-in neutral.Model No. B90 ORDER NO. 762-00900
Lock in Neutral
B183This control features a positiveneutral lock-in position of the leverand a neutral safety switch to preventin gear starting.Model No. B183ORDER NO. 762-01830
B184This control features a positiveneutral lock-in position of the lever, aneutral safety switch to prevent ingear starting, and a trim switch in thehandle for engine/drive trim and tilt.Model No. B184ORDER NO. 762-01840
B184 MERC.Includes # 351-00035 ( Mfr.# K35 )connection kit for installation ofMercury type cables.Model No. B184 MercORDER NO. 762-01841
B85Standard smooth design well suitedfor use on sailboats. This controlfeatures a positive neutral lock-inposition of the lever and a neutralsafety switch to prevent in-gearstarting. To shift control an upwardmotion of the handle is required.Model No. B85ORDER NO. 762-00850
SINGLE LEVER SIDE MOUNT CONTROLSSingle lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
B85
B184
B183
ENGINE CONTROLS
For more information see www.uflexusa.com85
Features:
• Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling•Can be installed horizontally or vertically, on the starboard or port side of the boat•Provided with a brake tension release system adjustable from outside•Pull-out handle disengages shift for warm-up•Neutral safety switch # 351-00012 ( Mfr. No. X12) prevents in-gear starting•Exceeds EN ISO 11547 standards when X12 safety switch is installed•All models are provided with positive lock-in neutral to prevent accidental gear engagement•All models are provided with a power trim switch conveniently located in the handle grip that enables for easy tilting of the engine
•For use with all Teleflex 3300 Type, 33C and 33C Supreme engine control cables. Or C2, C8, CØ Ultraflex engine control cables.•For Mercury Type cable # 351-00035 ( Mfr. No. K35) kit is required, except for # 762-01841 (B14 Merc.) control.
B310CHThis control features a positive neutral lock-inposition of the lever and a neutral safety switchto prevent in gear starting, and a trim switch inthe handle for engine/drive trim and tilt.Model No. B310CHORDER NO. 762-03100-CH
B310BRThis control features a positive neutral lock-inposition of the lever and a neutral safety switchto prevent in gear starting, and a trim switch inthe handle for engine/drive trim and tilt.Model No. B310BRORDER NO. 762-03100-BR
B310BThis control features a positive neutral lock-inposition of the lever and a neutral safety switchto prevent in gear starting, and a trim switch inthe handle for engine/drive trim and tilt.Model No. B310BORDER NO. 762-03100-B
191.
1[7
.52]
136.6 [5.38]
32.6 [1.28]
49.5 [1.95]
140 [5.51]
231
[9.0
9]
107 [4.21]
SINGLE LEVER SIDE MOUNT CONTROLSSingle lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
B310B
B310CH
B310BR
ENGINE CONTROLS
For more information see: www.uflexusa.com86
TWIN LEVER CONTROLFOR TWO ENGINESMfr. No. B302CORDER NO. 762-03020
Features:
• Enables easy and safe shifting by preventingaccidental gear engagement unless engine isidling.• Made of chrome plated marine aluminum• Pull-out handle disengages shift for warm-up• Neutral safety switch # 351-00043(Mfr. No. X43) (optional) prevents in-gearstarting.• Built-in friction to avoid throttle creep.• For use with Teleflex 3300 Typeor 33C, 33C Supreme engine control cables.Or C2, C8 and CØ Ultrafllex engine controlcables.
B103Single lever controlfor one engineORDER NO. 762-01030
B104Twin lever controlfor two enginesORDER NO. 762-01040
B77Single lever controlfor one engine, black dome,chrome plated lever, with trim.ORDER NO. 762-00770
B79Twin lever controlfor two engines, black dome,chrome plated lever, with trim.ORDER NO. 762-00790
Single lever / dual action control to operate both with throttle and shift.Suitable for any type of boats with outboard, inboard or I/O power plants.
• Compact single lever controls offering a unique low profile stylecompared to other controls available on the market• Enables easy and safe shifting by preventing accidentalgear engagement unless engine is idling• Made of chrome plated aluminum• Push-in button disengages shift for warm-up• Neutral safety switch # 351-00012 ( X12 )- prevents in-gear starting• Exceeds EN ISO 11547 standards when# 351-00012 ( X12 ) safety switch is installed• For use with Uflex C2, C8 & MACHZero cables orTeleflex 3300 Type, 33C and 33C Supreme
Features:
• Enables easy and safe shifting by preventingaccidental gear engagement unless engine is idling.• Made of marine aluminum, chrome plated orpowder coat finish• Pull-out handle disengages shift for warm-up.• Neutral safety switch # 351-00012(Mfr. No. X12) prevents in-gear starting.• Power trim switch conveniently located in thehandle grip enables easy tilting of the engine.• For use with all Teleflex 3300 Type, 33C,and 33C Supreme engine control cables.Or C2, C8, CØ Ultraflex engine control cables.• For Mercury Type cable # 351-00035(Mfr. No. K35) kit is required.
LOW PROFILE SINGLE LEVER TOP MOUNT CONTROLS
SINGLE LEVER TOP MOUNT CONTROLSSingle lever / dual action control to operate both throttle and shift. Suitable for any type of boat with outboard, inboard or I/O power plants.
SINGLE LEVER CONTROLFOR ONE ENGINEMfr. No. B301CORDER NO. 762-03010
ENGINE CONTROLS
For more information see www.uflexusa.com87
Features:
• Flush mount design makes them suitable for exposed positionssuch as fly bridge.• Made of marine aluminum with chrome plated lever.• Throttle lever is provided with adjustable brake tension releasesystem and shift lever with forward, reverse and neutral detents.Both the brake tension release and detents can be installed andadjusted from the outside.• Neutral safety switch # 351-00012 (Mfr. No. X12) optional,prevents in-gear starting.• Available with straight levers (B59) or bent levers (B58).• B58 and B59 models are provided with an interlock kit toprevent accidental gear engagement.• For use with Teleflex 3300 Type, 33C or 33C Supremeengine control cables or Ultraflex C2, C7, C8and CØ engine control cables.• For Teleflex 4300 Type or Ultraflex C22 engine cable,# 351-00022 (Mfr.# K22) connection kit isrequired for the control.
B58Control with Bent Levers,Throttle and Shift, with interlock.ORDER NO. 762-00580
B59Control with Straight Levers,Throttle and Shift, with interlock.ORDER NO. 762-00590
TWO LEVER TOP MOUNT CONTROLSTwo lever/single action control: each lever operates separately either throttle or shift
B49Control. Black finish. ORDER NO. 762-00490
SINGLE ACTION TWO LEVER CONTROLSuitable for all outboard engines.
Features:
• Made of nylon fiberglass with anodized aluminum levers.• Left or right side mount installation.• For use with engine control cables:- Teleflex CC205 or Ultraflex C14(OMC 1979-date) control cables with # 351-00023 (Mfr. No. K23)connection kit.- Teleflex CC170 or Ultraflex C4 (OMC pre-1979) control cables with # 351-00024 (Mfr. No. K24) connection kit.- Teleflex 3300 Type, 33C, 33C Supreme or Ultraflex C2, C7, C8 and CØ controlcables with # 351-00025 (Mfr. No. K25)connection kit.- Teleflex CC179 or Ultraflex C5 (Merc 1965-date)without connection kit.
Features:
• Flush mount design makes them suitable for exposedpositions such as fly bridge.• Levers structure made of die cast zinc provided with a softthermo plastic ergonomical handgrip.• Adjustable brake to avoid throttle creep and positivedetent for shift• Optional adjustable ratchet for precise throttle operationuse kit # 351-00052 (Mfr. No. K52).• Neutral safety switch # 351-00012 (Mfr. No. X12)(optional)prevents in-gear starting.• Raked throttle handle and straight gear handle for bettermanoeuvering.• B204 and B208 models are provided with an interlockkit to prevent accidental gear engagement.• For use with Teleflex 3300 Type, 33 or 33C Supreme enginecontrol cables or Ultraflex C2, C7, C8 andCØ engine control cables.• For Teleflex 4300 Type or Ultraflex C22 engine cable,# 351-00022 (Mfr. No. K22) connection kit isrequired for the control.
B204Black painted Controlwith black soft hand grip,Throttle and Shift, with interlock.ORDER NO. 762-02040
B208White painted Controlwith grey soft hand grip,Throttle and Shift, with interlock.ORDER NO. 762-02080
150mm5.9"
150mm5.9"
74mm2.9"
240m
m9.5"
195m
m7.7"
74mm2.9"
240m
m9.5"
180m
m7.8"
ENGINE CONTROLS
For more information see: www.uflexusa.com
X12ORDER NO. 351-00012
K35ORDER NO. 351-00035
K22ORDER NO. 351-00022
K23ORDER NO. 351-00023
K51ORDER NO. 351-00051
K24ORDER NO. 351-00024
K25ORDER NO. 351-00025
Features:
• Flush side mount installation.• Particulary suitable for throttle control and hydraulic shift operation.• Provided with adjustable brake tension release and detents.• For use with Teleflex 3300 Type, 33C, 33C Supreme and CC692/CC693(4300 Type) engine control cables.Or Ultraflex C2, C7, C8, CØ, C22 and C23BC engine control cables.
ORDER NO. 762-00350
K22 - ORDER NO. 351-00022Kit to connect Teleflex 4300/43C Type or Ultraflex C22 cable to topmount two lever control boxes B58, B59, B204, B208
K23 - ORDER NO. 351-00023Kit to connect Teleflex CC205 orUltraflex C14 (OMC 1979-date) cable to B49 control box.
K24 - ORDER NO. 351-00024Kit to connect Teleflex CC170 or Ultraflex C4 (OMC pre-1979)cable to B49 control box.
K25 - ORDER NO. 351-00025Kit to connect Teleflex 3300 Type, 33C, 33C Supreme or UltraflexC2, C7, C8, and C0 cables to B49 control box.
K35 - ORDER NO. 351-00035Kit to connect Teleflex CC179 & CC210 or Ultraflex C5 & C16 todual function controls.Note: These cables do not work with B103 and B104 controls.
K51 - ORDER NO. 351-00051Kit to connect Teleflex CC205 or Ultraflex C14 cable to engine foruse with B90 control.
K52 - ORDER NO. 351-00052Adjustable ratchet for B204, B208 controls.
X12 - ORDER NO. 351-00012Neutral safety switch to prevent in-gear starting. For all Ultraflexcontrols except B103, B104 & B184 merc controls.
X43 - ORDER NO. 351-00043Neutral safety switch to prevent in-gear starting, standardwith B103 and B104 controls.
X50 - ORDER NO. 351-00050Neutral safety switch to prevent in-gear starting, standard withB184.merc controls
TRIM SWITCHFor All Ultraflex ControlsORDER NO. 351-00000
B35 CONTROL BOX
ACCESSORIES FOR CONTROL BOXES
88
ENGINE CONTROL ACCESSORIES
For more information see: www.uflexusa.com89
CONTROL CABLES
Uflex offers the best quality and most affordable cables in thebusiness. Every Uflex cable has a full complement of 16 temperedlay wires, a claim not every company can make.A full complement of wires around the core allows for an overallstronger cable, smoother cable bends, a more consistent radius,hence less backlash, and longer life.
C8 CONTROL CABLES - STAINLESS STEEL FITTINGS
FOR NEW INSTALLATION
Measure A + B distance from the control along an unobstructed cablerouting to clutch and / or throttle connection.Round this dimension off to the next whole foot: you will have yourcable length. We recommend that the cable bends have a minimumradius of about 8" (200 mm).For outboard engine installations, it is necessary to add three feet tothe obtained length, in order to allow the engine movement.
To determine the needed length of the REPLACEMENT CABLE,measure it from tip to tip. When ordering, specify the cable length infeet, rounding the dimension off to the next whole value.If any kit is required to complete the cable connection, consult theappropriate section in this catalog.
MACHZERO UNIVERSAL3300 STYLE CABLES
Features and Performance
• MACHZero - Universal 3300 Style Cables• Stroke: 3.4” (87 mm)• Suitable for outboard, inboard, andsterndrive engines• Ideal for high performance applications, long cableruns and complex routings• Blue color jacket• High efficiency for smooth operation• High flexibility for reduced bend radius.• Maintenance free• Stainless steel cable end fittings• High resistant blue outer jacket,against abrasion, UV and chemicals
UNIVERSAL 3300 STYLE CABLES
HOW TO MEASUREFOR UFLEX CONTROL CABLE INSTALLATION
Order No. Length/Ft.
762-08006 6'
762-08007 7'
762-08008 8'
762-08009 9'
762-08010 10'
762-08011 11'
762-08012 12'
762-08013 13'
762-08014 14'
762-08015 15'
Order No. Length/Ft.
762-08016 16'
762-08017 17'
762-08018 18'
762-08019 19'
762-08020 20'
762-08022 22'
762-08024 24'
762-08026 26'
762-08028 28'
762-08030 30'
Order No. Length/Ft.
762-09906 6'
762-09907 7'
762-09908 8'
762-09909 9'
762-09910 10'
762-09911 11'
762-09912 12'
762-09913 13'
Order No. Length/Ft.
762-09914 14'
762-09915 15'
762-09916 16'
762-09917 17'
762-09918 18'
762-09919 19'
762-09920 20'
762-09922 22'
762-08024 24'
OUTBOARD
A + B + 3' (90cm) = L
INBOARD / STERNDRIVE
A + B = L
CONTROL CABLES
TILLER ROPE PULLEYStamped 304 Stainless - Nylon Sheave
TILLER CABLE3/32'' 7 x 7 Galv. Clear PVC 3/16''ORDER NO. 085-0000550 ft. coilORDER NO. 085-02500250 ft. coilORDER NO. 085-05000500 ft. coil
TILLER ROPE GROMMETMolded of durable polyethylene.Has 3'' opening and 5/16'' insideflange. Uses #10 fasteners.ORDER NO. 101-10153White GrommetORDER NO. 101-10155Black Grommet
T-H FLEX™ SLEEVING• Lightweight sleeving• Protects wire, cables and hoses• Braided from high temperature yarn.• Expands up to four times its normal diameter
ORDER NO. Mfr. No. Wire dia. A B C Eye Strap100-91934 091934-1 3/16" 2-3/8" 1-7/16" Yes
ORDER NO. Mfr. No. Description205-00125 FLX-125-DP 1-1/4" x 50' Flex Sleeving205-00150 FLX-150-DP 1-1/2" X 50' Flex Sleeving205-00200 FLX-200-DP 2" x 50' Flex Sleeving
TILLER LINE CLAMPDie-Cast ZAMAKFor 3/16'' to 1/4'' diameter tiller lineORDER NO. 218-80430 (Pair)
CABLE CLAMPDie Cast Zinc Chrome PlatedCable Dia. 3/16'' Mfr. No. 091852-1ORDER NO. 420-91852 (Pair)
MOTORWELL BOOTRigid, high-impact, non-corrosive, plasticreinforcing ring is molded into boot. This makesmounting easy, cost effective and water tight withonly four #8 fasteners required.
ORDER NO. 101-01511Covers 3" holeORDER NO. 101-10151Covers 4" hole
CABLE BOOT 3"Black - ORDER NO. 205-90010White - ORDER NO. 205-90011Requires a 3" diameter hole and mounts with 6 pan head screws.
CABLE BOOT 4-1/2"Black - ORDER NO. 205-90040White - ORDER NO. 205-90041
Requires a 4-1/2" diameter hole andmounts with 8 pan head screws.
CABLE BOOTThis is truly a functional cable boot that is easy to install. No longernecessary to split or cut your motor well boot to pass cables through.This cable boot provides a fully open area to pass wiring and cablesthrough and when rigging is complete simply pull cable tie snug aroundwires and cable to complete installation. The cable boot is constructedof rugged black vinyl that resists ultraviolet rays, gasoline and oil.This cable boot is available in two sizes to cover all installationrequirements. Patent Number 4,958,790.
For more information see: www.thmarine.com
MOTORWELL BOOTMolded RubberA = 5-1/2" B = 9/16"Fastener: #8 RHMfr. No. 521655 ORDER NO. 425-21655
For more information see: www.seadog.com
For more information see: www.attwood.com
TILLER ROPE SPRINGSElectrogalvanized SteelNormal Length: 5''Compressed Length: 6''Mfr. No. 091814-1ORDER NO. 420-91814 (Pair)
For more information see: www.detmarcorp.com www.sea-dog.com
085-00005 085-05000
ROPE STEERING ACCESSORIES/TILLER CABLE
90