CC Marine 2013-14 Catalogue_Mooring

MOORING&ANCHOR

2013 Pages 404_405:2013 3/4/13 3:12 PM Page 3

For more information see: www.polyformus.com

FENDERS

406

ORDER NO. Model Size Case Qty

BLACK200-06151 HTM-1 6" x 15" 6200-71026 HTM-2 8" x 20" 4200-71032 HTM-3 10" x 26" 4200-12341 HTM-4 12" x 34" 4BLUE200-06152 HTM-1 6" x 15" 6200-41026 HTM-2 8" x 20" 4200-41032 HTM-3 10" x 26" 4200-12342 HTM-4 12" x 34" 4BURGUNDY200-06154 HTM-1 6" x 15" 6200-08204 HTM-2 8" x 20" 4200-10264 HTM-3 10" x 26" 4200-12344 HTM-4 12" x 34" 4CLASSIC RED200-06157 HTM-1 6" x 15" 6200-08207 HTM-2 8" x 20" 4200-10267 HTM-3 10" x 26" 4200-12347 HTM-4 12" x 34" 4

ORDER NO. Model Size Case Qty

COBALT BLUE200-06156 HTM-1 6" x 15" 6200-08206 HTM-2 8" x 20" 4200-10266 HTM-3 10" x 26" 4200-12346 HTM-4 12" x 34" 4FOREST GREEN200-06153 HTM-1 6" x 15" 6200-08203 HTM-2 8" x 20" 4200-10263 HTM-3 10" x 26" 4200-12343 HTM-4 12" x 34" 4NAVY200-06155 HTM-1 6" x 15" 6200-08205 HTM-2 8" x 20" 4200-10265 HTM-3 10" x 26" 4SAND200-06158 HTM-1 6" x 15" 6200-08208 HTM-2 8" x 20" 4200-10268 HTM-3 10" x 26" 4200-12345 HTM-4 12" x 34" 4WHITE200-06150 HTM-1 6" x 15" 6200-10260 HTM-2 8" x 20" 4200-11320 HTM-3 10" x 26" 4200-12340 HTM-4 12" x 34" 4

A FENDER FOREVERY BOAT

A FENDER FOREVERY CONDITION

HTMS E R I E S

FEATURES:• Even wall thickness formaximum strength

• Molded in ribs for strengthand abrasion resistance

• Reinforced tube ends• Designed for use in mediumduty applications in bothpermanent protected andunprotected moorings

• Mirror like finish willlast for years

• Offered in more colours thanany other manufacturer

• Tube diameter 5/8"• Unique polyform valve foryears of service

TRUE-FIT FENDER HOLDER KITFender Holder Kits include two baskets and all connectors needed for correct mounting.Every (2) holders need (3) TFR 402 swivel connectors and (1) pair of TFR 403 parallel connectors for proper installation.

TFR-402Swivel Connector(Fits 7/8" - 1" Rails)

Reinforced Tube Ends

Even wallthickness formaximumstrength

Molded inribs forstrength andabrasionresistance

TFR-403Parallel Connector(Fits all holders)

Blue

Red

Burgundy

Navy

Black

Sand

Green

White

CobaltBlue

Sold by each

Sold by each

Sold by each

ORDER NO. Model Description Fits Case Qty

200-17020 TFR-170-2 Fender Kit / 6.75", 2 Holders 6" 1200-17030 TFR-170-3 Fender Kit / 6.75", 3 Holders 6" 1200-00230 TFR-230 Fender Holder Basket 9" (ea.) 12200-23020 TFR-230-2 Fender Kit / 9", 2 Holders 8" 1200-23030 TFR-230-3 Fender Kit / 9", 3 Holders 8" 1200-00280 TFR-280 Fender Holder Basket 12" (ea.) 12200-28020 TFR-280-2 Fender Kit / 12", 2 Holders 10" 1200-28030 TFR-280-3 Fender Kit / 12", 3 Holders 10" 1CONNECTORS200-00402 TFR-402 Swivel Connector 7/8" - 1" Rail 12200-00403 TFR-403 Parallel Connector (Pair) 12200-00404 TFR-404 Swivel Connector 1.25" Rail 12

Sold by each

2013 Pages 406_407:2013 2/26/13 11:44 AM Page 2

For more information see: www.polyformus.com407

FENDERS

ORDER NO. Model Size Case EyeQty Dia.

COBALT BLUE200-35136 G-1 3-1/2" x 13" 12 3/8"200-45066 G-2 4-1/2" x 16" 12 1/2"200-55206 G-3 5-1/2" x 20" 6 5/8"200-65236 G-4 6-1/2" x 23" 6 3/4"200-85276 G-5 8-1/2" x 27" 4 3/4"FOREST GREEN200-35133 G-1 3-1/2" x 13" 12 3/8"200-45063 G-2 4-1/2" x 16" 12 1/2"200-55203 G-3 5-1/2" x 20" 6 5/8"200-65233 G-4 6-1/2" x 23" 6 3/4"200-85273 G-5 8-1/2" x 27" 4 3/4"SAND200-35135 G-1 3-1/2" x 13" 12 3/8"200-45065 G-2 4-1/2" x 16" 12 1/2"200-55205 G-3 5-1/2" x 20" 6 5/8"200-65235 G-4 6-1/2" x 23" 6 3/4"200-85275 G-5 8-1/2" x 27" 4 3/4"WHITE200-35130 G-1 3-1/2" x 13" 12 3/8"200-45060 G-2 4-1/2" x 16" 12 1/2"200-55200 G-3 5-1/2" x 20" 6 5/8"200-65230 G-4 6-1/2" x 23" 6 3/4"200-85270 G-5 8-1/2" x 27" 4 3/4"

ORDER NO. Model Size Case EyeQty Dia.

BLACK200-35131 G-1 3-1/2" x 13" 12 3/8"200-45061 G-2 4-1/2" x 16" 12 1/2"200-55201 G-3 5-1/2" x 20" 6 5/8"200-65231 G-4 6-1/2" x 23" 6 3/4"200-85271 G-5 8-1/2" x 27" 4 3/4"BLUE200-35132 G-1 3-1/2" x 13" 12 3/8"200-45062 G-2 4-1/2" x 16" 12 1/2"200-55202 G-3 5-1/2" x 20" 6 5/8"200-65232 G-4 6-1/2" x 23" 6 3/4"200-85272 G-5 8-1/2" x 27" 4 3/4"BURGUNDY200-35134 G-1 3-1/2" x 13" 12 3/8"200-45064 G-2 4-1/2" x 16" 12 1/2"200-55204 G-3 5-1/2" x 20" 6 5/8"200-65234 G-4 6-1/2" x 23" 6 3/4"200-85274 G-5 8-1/2" x 27" 4 3/4"CLASSIC RED200-35137 G-1 3-1/2" x 13" 12 3/8"200-45067 G-2 4-1/2" x 16" 12 1/2"200-55207 G-3 5-1/2" x 20" 6 5/8"200-65237 G-4 6-1/2" x 23" 6 3/4"200-85277 G-5 8-1/2" x 27" 4 3/4"

G

F

S E R I E S

WSS E R I E S

S E R I E S

Even wall thicknessthroughout product

Ribs molded intoproduct to absorbimpact, abrasion

Reinforcedropeholds

One wayvalve

Take a look inside and see Polyform’slegendary quality, design and

construction from the inside out

ORDER NO. Model Colour CaseQty

200-00001 WS-1 Red 60200-00002 WS-1 Yellow 60200-00003 WS-1 Green 60

ORDER NO. Model Colour Size

200-06250 F-1 White 6" x 25"200-09250 F-2 White 9" x 25200-12300 F-5 White 12" x 30"

CLASSIC EUROPEANFENDER FOR THE MOSTDEMANDING USE•Wide range of sizes to suit any vessel

•White fender with blue ropeholds

• Unique vinyl valve seals securely• Even wall thickness

•Multiple ribbed reinforced ropeholds

• Twin-eye design for vertical or horizontal use

• Designed for use in permanent unprotectedmoorings, pilings, locks and concrete walls

A FENDER FOREVERY BOAT

A FENDER FOREVERY CONDITION

Blue

White

Green

Black

Sand

RedCobalt Blue

Burgundy

Sold by each Sold by each

Sold by each Sold by each

FEATURES:• Even wall thickness for maximumstrength

• Available in a wide selection ofcolours

• Recognized as the “best” in its class

• Polyform’s most popular product

• Molded in ribs for strengthand abrasion resistance

• Reinforced ropeholds

• Designed for use by trailered boatsand permanent protected moorings

• Unique Polyform valve for years ofservice

Water SkiSlalom Buoy• Meets official American WaterskiAssociation specifications for recordcapability tournaments

• Multiple colours to mark both skiand boat courses

• High quality PVC construction

• Durable ropehold

2013 Pages 406_407:2013 2/26/13 11:46 AM Page 3

THE GUARANTEE OF A LIFETIME!Against Splitting or Bursting....If it fails we’ll replace it!

You take a lot of pride in your boat, and part of that pride is its color scheme. Too often, the colors of your accessories just never seem tomatch up quite right with the boat’s gelcoat, or with each other, leaving it with a variety of mis-matched colors at the dock.

That’s why Taylor Made is introducing True Color™. Our team of engineers has spent countless hours creating color mixes for our fendersand accessories to closely match the most popular colors used in OEM’s gelcoats and trim.So, when choosing a brand to outfit your boat, choose Taylor Made®...the only marine accessory company with true colors.

HULL GARD® INFLATABLE VINYL FENDERS

• Unique oval shape prevents rolling• Molded in football needle style valve is integrally moldedinto the fender, not glued like the competition.• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!

BIG B™ INFLATABLE CRT™ VINYL FENDERS

• Center Rope Tube™ allows for end-to-end line passage• Can be hung vertically or horizontally with a single line• Molded in football needle style valve is integrally moldedinto the fender, not glued like the competition.

WhiteOrder No.

BlueOrder No.

CranberryOrder No.

Hunter GreenOrder No.

NavyOrder No.

BlackOrder No. D x L Size Boat Size

101-10210 104-41021 4.5" x 16" 10' to 15'

101-10220 104-41022 105-31022 105-41022 105-71022 103-31722 5.5" x 20" 15' to 20'

101-10230 104-41023 105-31023 105-41023 105-71023 103-31723 6.5" x 23" 20' to 25'

101-10280 105-31028 105-41028 105-71028 8.5" x 27" 25' to 35'

101-10240 10.5" x 30" 35' to 50'

WhiteOrder No.

BlueOrder No.

CranberryOrder No.


NavyOrder No.

BlackOrder No D x L Size Boat Size

119-50520 119-51520 119-53520 119-54520 119-57520 119-52520 5.5" x 20" 15' to 20'119-50622 119-51622 119-53622 119-54622 119-57622 119-52622 6.5" x 22" 20' to 25'

119-50824 119-51824 119-53824 119-54824 119-57824 119-52824 8.5" x 26" 25' to 35'

SUPER GARD™ INFLATABLE VINYL FENDERS

• Double molded ends for added strength• Ribbed sides to minimize roll• Molded in football needle style valve is integrally molded into thefender, not glued like the competition.

#1 SELLING FENDERS!

• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!

• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!

Double molded end for strengthwhere you need it most!

Marine grade vinyllasts years in the sun!

WhiteOrder No.

BlueOrder No.

CranberryOrder No.


NavyOrder No.

BlackOrder No.

SandOrder No. D x L Size Boat Size

111-10250 111-41025 105-31025 105-41025 105-71025 111-71025 106-01025 6" x 15" 20' to 25'

111-10260 111-41026 105-31026 105-41026 105-71026 111-71026 106-01026 8" x 20" 25' to 35'111-10320 111-41032 105-31032 105-41032 105-71032 111-71032 106-01032 10" x 26" 35' to 50'

111-10340 111-41034 105-71034 111-71034 12" x 34" 50' to 60'

BOAT FENDERS

408For more information see: www.taylormadeproducts.com

For more information see www.taylormadeproducts.com409

FENDER BOOTS & COVERS

TRADITIONAL FENDER BOOTS• Knit fabric hugs the fender for a close fit. • Smooth polyester fabric resists picking up dirt and grit.• Neoprene sewn into the hem keeps the boot on your fender.• Sold in pairs.

FLEECE FENDERS BOOTSFinally a fender cover specially designed to fit CRT™ (Center Rope Tube) style fenders.These will provide your boat with the ultimate in hull protection. No marring or colortransfer to your boat. Constructed from 12 ounce Blizzard Fleece, these 100% polyesterfender boots come with a reinforced grommetted top with an adjustable tie on theopposite end for a snug fit.

PREMIUM FENDER COVERSCovers are knit from heavy weight, high tenacity solution dyed nylon yarn that stands up to sunlight,abrasion and harsh environments. The fabric is a circular knit construction to eliminate lateralseams (that can fail due to the added friction) and has a high degree of elasticity to maintain itsshape and ensure a nice tight fit to your fender. The covers are secured, both top and bottom, withan adjustable, high strength polypropylene rope that keeps the cover in place yet allows for easyremoval for cleaning. By combining superior fabric with these excellent construction features, Taylordelivers a fender cover that won’t fail after only a season or two, but will look great and providelasting protection for many years. Sold individually.

BLACK NAVY FITS FENDER SIZEORDER NO. ORDER NO.111-90310 111-90350 8" x 20"111-90330 111-90360 10" x 26"

BLACK NAVY FITS FENDER SIZEORDER NO. ORDER NO.105-50010 105-50410 5-1/2" x 20"105-50020 105-50420 6" x 15" & 6-1/2" x 23"105-50030 105-50430 8" x 20" & 8-1/2" x 27"105-50040 105-50440 10" x 26" & 10-1/2" x 30"

NAVY BLACK FITS FENDER SIZEORDER NO. ORDER NO. Hull Gard® Super Gard™ Big B™111-90760 111-90800 8-1/2" x 27" 8-1/2" x 26" 8" x 20"111-90770 111-90810 10-1/2" x 30" 10-1/2" x 30" 10" x 26"111-90780 111-90820 12" x 34"

BLUE BLACK BURGUNDY FITS FENDER SIZEORDER NO. ORDER NO. ORDER NO. Hull Gard® Super Gard™ Big B™111-90540 111-90550 111-90560 8-1/2" x 27" 8-1/2" x 26" 8" x 20"111-90580 111-90590 111-90600 10-1/2" x 30" 10-1/2" x 30" 10" x 26"111-90650 111-90660 111-90670 - 12" x 34"

TAYLOR TUX® FENDER BOOTS• Circular knit fabric eliminates lateral seams• Solution-dyed nylon fabric will not fade or bleed• Synthetic fabric for maximum sunlight resistance• Adjustable rope sewn into hem (top and bottom) provide custom fit• Tear and abrasion resistant• Machine washable• Sold individually

FENDER BOOTS

NEW LONGER LASTING FABRIC!

SPECIALTY FENDERS

410

• The first boat fender to address the needs oflow freeboard boats.• Shaped to protect the gunwales and rubrail.• Offers superior protection compared toregular fenders against high docks.• Can be tied over the cleat to position ithigher on the boat, putting protectionwhere it is needed.

U.S. PATENT #5,671,692

• The Fence Saver secures to thefence or railing and is designed toprevent contact to the delicatealuminum fencing.• Especially effective preventingthose nasty dings that occur whenrafting a pontoon boat to aconventional hull boat.• The Pontoon Fender is specificallydesigned to fit snuggly betweenthe pontoon and the deck of theboat, protecting both from raftingboats, docks, or other objects.

PONTOON PROTECTORS

Exclusively designed for the needs of PontoonBoaters, these unique fenders offer a level ofprotection to areas on the Pontoon boat otherfenders can’t provide.

• The corner bumpers mountover the original factoryinstalled aluminum cornersection to provideair-cushioning impactprotection when docking.• Each corner section is moldedfrom a special grey pvcformulatedto match thealuminum color of the boatand secures withstainlessfasteners.

LOW FREEBOARD FENDERSPWC FENDERS

• Designed to custom fit theprofile of most PWCs.• Bottom is shaped to “hook”under the bond flange forquick attachment.• Features an inflation valve forair pressure adjustment.• Includes a suction cup andsecuring line.

TRANSOM FENDER

Uniquely shaped to fit the stern of a sailboat or the edge ofmost swim platforms up to 4" thick. An integral 3/4" diametertube allows a securing line to pass from end to end while acontoured shape helps 'grip' the fendering location.

Made from soft, flexible vinyl. Rubber football inflation valveto adjust the level of firmness to satisfy all applications.Size: 10" x 22"

ORDER NO. 111-56090

ORDER NO. Description666-31033 90° Corner Fender666-31034 Radius Corner Fender

ORDER NO. Description666-31030 Pontoon Fender666-31032 Fence Saver

SPECIALTY FENDERS & ACCESSORIES

For more information see: www.taylormadeproducts.com

ORDER NO. Color111-10690 White

ORDER NO. Color Size111-31005 White 5" x 14"111-31006 Metallic Black 5" x 14"

666-31032 666-31030

TUFF END™ BUOYS• Heavy duty seamless construction.• Ends are reinforced and tested to 2000 psi tensile strength,the strongest in the industry!• Large line holes accept standard shackles.• Trivalve™ for easy inflation with needle or compressor.• High Gloss Finish.• Guaranteed for the life of your boat!NOTE:The orange is a high visibility colour that exceeds

red or yellow in visibility at a distance.Three-year flotation warranty on all hard skin buoys

Great for Larger Boats and Rafting!

• Fade resistant, self-adhesive vinyl marker labels.• Brightly colored for high visibility.• Two labels required per buoy (sold in pairs).• Each label is 13" wide x 24" long to fit your Sur-Mark™ Buoy.• All labels are warranted for 5 years againstweathering or fading.Three-year flotation warranty on all hard skin buoys

ORDER NO.104-46180

ORDER NO.104-46185

ORDER NO.104-46181

SUR-MARK™ BUOY LABELS

TRADITIONAL SUR-MOOR™ MOORING BUOYS• Thick one piece outer shell molded of high density polyethylenefilled with solid closed-cell foam.• Puncture Proof and virtually indestructible.• Fittings, swivels and rings are hot dipped galvanized steel foradded years of service.• Hardware includedWARNING: Mooring lines must never be tied to the top loop.Mooring lines should always be attached to the anchor chain.

ORDER NO. Ht. Col.Dia.

LargeRing Dia.

Buoyancy†(lbs)

Visible Ht.Above Waterline

104-46104 49" 10" 18" 40 39"

WhiteORDER NO.

OrangeORDER NO. Diameter. Circumference. Line Hole Buoyancy†

(lbs)112-11430 111-11430 12" 38" 1-1/16" 33

112-11460 111-11460 15" 47" 1-1/2" 65

112-11490 111-11490 18" 57" 1-1/2" 112

112-11520 111-11520 21" 66" 1-1/2" 180

112-11550 111-11550 27" 85" 1-1/2" 375

• Molded from tough UV protected polyethylene.• One-piece seamless construction.• Internal concrete ballast.• Recessed galvanized eye.• Stand upright for easy storage.• Color labels sold separately.Three-year flotation warranty on all hard skin buoys*

Tube Buoy Approx.ORDER NO. Diameter Diameter Circumference Buoyancy† (Ibs.)111-46370 2" 12" 38" 30111-46371 2" 15" 47" 60111-46372 2-1/2" 18" 57" 100111-46374 2-1/2" 24" 75" 240

Approx.ORDER NO. Diameter Circumference Buoyancy† (Ibs.)102-21700 12" 38" 30102-22171 15" 47" 60102-21720 18" 57" 100102-22174 24" 75" 240

† BUOYANCY RATING: The number indicated is the maximum flotation the buoyprovides while fully submerged. 50% of this value will be the weight the buoy cansupport at the level of the stripe. Blue Stripe is Reflective for Nighttime Visibility.

Traditional Sur-Moor™ T3C™

SUR-MARK™ MARKER BUOYS


The Guarantee of a Lifetime!Against Splitting or Bursting...If it fails we’ll replace it!

SUR-MOOR™ T3C™ MOORING BUOY• Sur-Moor™ hard skin mooring buoys have a seamless andtough, one-piece polyethlene shell.• Feature ultraviolet light absorbers• Sandblasted finish allowing the buoy to be easilypainted for identification• Filled with closed cell foam to positively displace water• Tube-through-the-center design with blue reflective striping• Flanged collar made from rigid PVC tubing• Hardware not included

WATER SKI MARKER BUOYSMade from PVC these lightweight but durableinflatable buoys wil mark your slalom coursein accordance with the AWSA specifications(American Water Ski Association). Each buoyhas a molded-in-loop to fasten anchor line andcontains an inflation valve for air pressureadjustment. Buoys are 9" in diameter.Colour: RedMfr. No. 164ORDER NO. 101-00164

411

MOORING ACCESSORIES/BUOYS

Dolphin Twin Eye fenders feature specially reinforced heavy-duty integral lugs for added strength and longer durability.These fenders provide maximum protection and value for your dollar. All Dolphin fenders are manufactured from the best quality Marine

Grade vinyl resulting in superior strength, cushioning and a high gloss finish.Dolphin fenders resist deterioration from mildew, gas, oil, seawaterand bacteria and have built-in U.V. Stabilizers. All fenders include an inflation valve to allow adjustment for the desired level of firmness.Each Fender is warranted for the life of the boat.

KWIK ADJUST FENDER LOK™Ratcheted strap allows quick, easy attaching.Simply squeeze tabs to release fender for storage.One finger height adjuster allows quick adjustment from 4"– 24".

ORDER NO. 440-91500 1/Pk

ORDER NO. Description Colour440-91561 3/8 in. x 5 ft., 2/ Pk, White440-91562 3/8 in. x 5 ft., 2/ Pk, Royal Blue440-91566 3/8 in. x 5 ft., 2/ Pk, Black440-91569 3/8 in. x 5 ft., 2/ Pk, Navy Blue

440-91571 3/8 in. x 8 ft., 2/ Pk, White440-91572 3/8 in. x 8 ft., 2/ Pk, Royal Blue440-91576 3/8 in. x 8 ft., 2/ Pk, Black440-91579 3/8 in. x 8 ft., 2/ Pk, Navy Blue

ORDER NO. Description Colour112-11640 4.5" x 16" Smooth White112-22050 5.5" x 20" Smooth White112-32360 6.5" x 23" Smooth White112-42780 8.5" x 27" Smooth White112-50301 10" x 30" Smooth White

112-59161 4.5" x 16" Ribbed White112-59201 5.5" x 20" Ribbed White112-59231 6.5" x 23" Ribbed White112-59271 8.5" x 27" Ribbed White Twin Eye Ribbed

TWIN EYE, SMOOTH & RIBBED FENDERS

FENDER LINESFENDER LINES

COLOUR SWATCHES

ORDER NO. Description Colour112-11560 6"x15" White112-22080 8"x20" White112-32590 10"x25" White

CENTRE HOLE, RIBBED BOAT FENDERS

All Dolphin roto-molded fenders are manufactured from the best quality Marine Gradevinyl resulting in superior strength, cushioning and a high gloss finish. Dolphin fendershave been tested for many years in various marine environments worldwide. Dolphinfenders resist deterioration from mildew, gas, oil, seawater and bacteria and have built-inU.V. Stabilizers. All fenders include an inflation valve to allow adjustment for the desiredlevel of firmness. Dolphins new Twin Eye Ribbed fenders feature specially reinforcedheavy-duty integral lugs for added strength and longer durability. These fenders providemaximum protection and value for your dollar. Each centre hole fender is equipped withcentral tubing to allow end-to-end line passage. Unique ribbed construction gives strengthto the fender, minimizes rolling and offers maximum protection.

FENDERS AND ACCESSORIES

412For more information see: www.dockedge.com

For more information see www.kwiktek.com413

FENDERS AND ACCESSORIES

HULL HUGR® DISPLAYStocked with an assortment of styles in a variety of colours!

Contents:

• 4 each Contour Fenders in Blue, White & Black• 4 each Flat Fenders in Blue, White & BlackORDER NO. 737-12000Mfr. No. HH DISPLAY

HULL HUGR®MODULAR FLAT EVA FENDER• 3 layer dual density EVA• Easy to stow and will not puncture or absorb water• Flat design prevents them from rolling or riding up• Link 2 or more together with the hook and loopstraps provided

• Great for rafting 2 boats together

NO-SLIP™ FENDER STRAPSNo more tying and untying knots!

• No Slip pads sewn to the underside of thestraps minimize sliding along rails

• Easily adjust the length in seconds from6" to 40" to fit most boats & docking situations

• Attach to rails and cleats securelyORDER NO. 737-19786Mfr. No. SF-2

HULL HUGR® CONTOUR FENDERS• Constructed of durable rip proof tri-laminate cover,with enclosed cell foam inside, anddurable polycarbonate grommets

• They hinge to wrap around the gunwale and hull,following the contours of the boat

• Easily stows under a seat or in a side compartment• Stays put unlike round fenders, that tend to roll upfrom contact with the dock, leaving your boat unprotected

• Size: 24" long x 2-1/2" thick

HULL HUGR® FENDERSWhen boats rock, Hull Hugr® stays put

• Patented design, constructed of UV and puncture resistantmarine grade vinyl/polyester tri-laminate

• Six blocks of durable closed-cell foam are sealed inside• Folds up to a compact size, easy to stow, or use as a cushion• Blue in colour

ORDER NO. Mfr. No. Description737-29174 HH-20BL Blue - 20" x 8" x 2"737-29181 HH-24BL Blue - 24" x 12" x 3"737-29198 HH-36BL Blue - 36" x 12" x 3"737-32600 HH-20GR Grey - 20" x 8" x 2"737-32617 HH-24GR Grey - 24" x 12" x 3"737-32624 HH-36GR Grey - 36" x 12" x 3"

ORDER NO. Mfr. No. Colour737-12001 HH-1 Blue737-12002 HH-1B Black737-12003 HH-1W White

ORDER NO. Mfr. No. Colour737-12004 HH-1C Blue737-12005 HH-1CB Black737-12006 HH-1CW White

ORDER NO. Mfr. No. Size

737-16068 HH-MMedium - 7-1/2'L x 22" H

(6 foam bumpers - 20" x 6" x 2")Folds to only 22" x 15" x 4"

737-16075 HH-LMedium - 9'L x 26" H

(6 foam bumpers - 24" x 6" x 2-1/2")Folds to only 26" x 18" x 6"

HULL HUGR® FLAT FENDERS• Constructed of durable marine grade tri-laminatewith a polycarbonate grommet at each end

• Hang them vertically or horizontally• Easily stows under a seat or in a side compartment• Stays put unlike round fenders, that tend to roll upfrom contact with the dock, leaving your boat unprotected

• Great for mounting to docks and posts too!• Size: 26" long x 2-1/2" thick

STOW ‘N GO™ FIBERGLASS DOCK BOXES

These fiberglass dock boxes are built tough. With a UV gelcoat finish andthe stainless steel lockable latch and hardware these are sure to hold up inthe harshest marine environments. Our dock boxes incorporate gas shock

lifts, which come standard on all models. These shocks help to keep your lidopen on rocking docks and in higher wind areas and allows for a slower, morecontrolled closing. These fiberglass molded dock boxes are also constructedwith a smooth interior finish which helps prevent splinters in your hands whenstoring or retrieving your boating accessories.Standard Dock BoxesProvide a large rectangular space in which to store all your boating needs.(2 shocks installed)

ORDER NO. Mfr. No. Description Height Width Depth666-83562 83562 Small 24” 54” 22”666-83552 83552 Medium 24” 72” 23”666-83551 83551 Large 24” 85” 22”

POST BUMPERSPost bumpers are great protection for pipe supported type docks. Protects theboat from contact with the metal dock pipe and hardware at dock level. Easilyslides over 1 1/2" dock pipe and rests securely against the dock. Molded frommarine grade vinyl with an inflation valve to adjust firmness. Bumper measures7" dia. x 17" long.ORDER NO. Mfr. No. Description666-45600 45600 Post Dock Bumper (White)

DOCK PRO™ HEAVY DUTYVINYL DOCK CORNER MOUNTTaylor Made now offers the ultimate in versatile, durable docking protection!Dock Pro heavy-duty vinyl bumpers are ideal for rough conditions, and can takea beating. Made from U.V. resistant, marine-grade vinyl, they provide excellentprotection for your boat and dock. Corner piece provides superior impactprotection on dock corners. Bumpers have inflation valves for easy adjustmentto desired firmness. Pre-drilled for easy, permanent mounting with platedfasteners.Dimensions: 13.5”L x 6”W x 10.5”HORDER NO. 666-45510 Mfr. No. 45510

• It is a Complete System - There is no need to buy extra attachmentdevices or rope.• No Need to Remove - Double hook attachment will keep the fenderfrom rolling around or popping up, there is no need tostore the fender.• Over 36" Long, Adjusts from 17" to 34" attachment. Protects fromabove the top railing to 4 to 5 inches below thefloor trim, or can be adjusted to protect thepontoons themselves.• Protects Below the Water Line. This is the onlyfender that can protect below the water line anddoes not float up like typical round fenders would.• Boat Covers can be installed normally, fitting inbehind the fender.• Thin top stainless steel hook allows it to beattached between cushion upholstery - impossiblewith a typical rope attachment.• Promotional DVD available• Molded in UV inhibitors and fungicides

For more information see: www.dockedge.com

FENDERS

414

440-53131 TOON FENDER, White, 36”440-53134 TOON FENDER, Beige, 36”440-53135 TOON FENDER, Grey, 36”440-53136 TOON FENDER, Black, 36”

‘TOON FENDER

For more information see:www.taylormadeproducts.com

666-45510

666-45600

666-83551


BIG B™ FENDER HANGERDesigned for use on Taylor Made fenders with 3/4" I.D. tubing. Maybe used on other brands; but due tovariation among brands the consumer must verify a tight enough fit between the tube and product forproper function (center tube must be small enough to keep the product halves firmly together)• Injection molded reinforced nylon for strength• Vented to prevent water accumulating in fender tube• Fits 3/8" diameter rope• Professional finished look ORDER NO. Mfr. No. Description

666-10850 1085 Big B™ Fender Hanger (3 pack)666-11085 11085 Big B™ Fender Hanger Display (36 Pieces)

PONTOON RAIL FENDER ADJUSTERDesigned specifically for the 1" square tube rails of Pontoon Boats.The mounting structure clamps securely to square tubing yet can berepositioned quickly and easily. Constructed from durable ABS plastic thisfender adjuster allows for simple height adjustment for lines up to 3/8".ORDER NO. Mfr. No. Description666-11390 1139 Pontoon Rail Fender Adjuster (4 pack)666-11391 11391 Pontoon Display Rack

(36 Pieces)

OVERSIZED “J” HOOKS• Fits all standard 1" or 1-1/2" railings forTaylor Made stainless steel fender racks• Sold in single packsORDER NO. 111-32191 Mfr. No. 32191

STAINLESS STEEL FENDER RACKS

• Cross reinforced for extra strength• High Gloss 316 stainless steel• Moveable “J” hooks mount on 7/8" rails and stanchion• Completely pre-assembled• Tightens to accomodate any angle• Holds any style fender• Folds flat for easy storage

2 Fender Units 3 Fender UnitsORDER NO. ORDER NO. FENDER DIAMETER111-20070 111-30070 Up to 7"111-20090 111-30090 7" to 9"111-20110 111-30110 9" to 11"

ORDER NO. Color/ Rail Size111-10150 White (STD)111-10160 Black (STD)111-10170 Blue (STD)111-10180 White (LG)

101-10150

TIDY-UP FENDER ADJUSTERQuick and simple. These fender adjusters simply snapover your lifelines or railing and are ready to use.Holds line up to 5/8" in diameter.

HAND PUMP WITH HOSE ADAPTERCompact hand pump for filling fenders, rafts, etc.

ORDER NO. 101-10050

415

FENDER ACCESSORIES

408

FA-1

For more information see www.dockedge.com

FENDER ADJUSTERS/CABLE-LINE HANG UPS

416

410 MULTI - PURPOSEHANG-UP - WOODEN RAILS

Durable vinyl strap is large enough and strong enough tohold a 20" life ring secure, from a hose to a shore powercord, this strap will get the job done.

409 MULTI - PURPOSEHANG-UP - PIPE RAILS

For use with Life Lines and Pipe Rails up to 1" in diameter

475 CABLE LINE HANG-UPExcellent for use with shore lines. These handy devicesare a snap to use with boats that have wooden rails orwire life lines. Can also be used to coil line, water hoses,telephone line, etc.

401

475

FENDER ADJUSTERSKWIK-ADJUST FENDER LINE ADJUSTERTough and durable PVC mounting strap snaps over railings,lifelines or stanchions. Allows fender lines to be adjusted tolength in a matter of seconds. 1 per pack.

ORDER NO. Mfr. No. Description440-91531 91-531-F White440-91536 91-536-F Black440-91539 91-539-F Navy Blue

For more information see www.nhsmarine.com

ORDER NO. Mfr. No. Colour114-10101 410-101 White114-10216 410-216 Blue114-10221 410-221 Black

ORDER NO. Mfr. No. Colour111-01010 FA1-101 White114-01110 FA1-111 Sand111-01300 FA1-300 Flat Red111-02160 FA1-216 Blue111-02170 FA1-217 Navy111-02210 FA1-221 Black111-02270 FA1-227 Teal111-02280 FA1-228 Forest Green111-02360 FA1-236 Burgundy

ORDER NO. Mfr. No. Colour114-09101 410-101 White

ORDER NO. Mfr. No. Colour114-01101 401-101 White

ORDER NO. Mfr. No. Colour114-75101 475 -101 White

410

AUTOMATICFENDER ADJUSTERThe automatic Fender Adjuster makesplacing fenders a breeze! Eliminates tying and untyingfender lines. No more tangled knots! Instant self lockingaction works automatically to raise and lower the fenderand hold it securely in place. Snaps around rails andlife-lines in seconds. Both models handle up to 1/2"diameter line. Vinyl strap with all stainless hardware.

FA1 FOR USE WITHWOODEN RAILS

408 FOR USE WITHLIFE LINES AND PIPE RAILSUP TO 1" IN DIAMETER

ORDER NO. Mfr. No. Colour114-08101 408-101 White114-08216 408-216 Blue114-08217 410-217 Navy114-08221 408-221 Black114-08228 408-228 Forest Green114-08236 408-236 Burgundy

409

401 BASIC HANG-UPHolds line (up to 45' of 3/4" line or 75' of l/2"),cable, extension cord, etc.

417

FENDER ACCESSORIES

Use this Davis accessory to clip your fenders torails, lifelines, side wing windows or cleats.Fender Tender II® simplifies the handling andrelocation of boat fenders. The “Railing Lock”firmly grasps rails from 7/8" to 1" (22mm to25mm) diameter. New “Lifeline Lock” providesadded safety. Use 1/4" to 3/8" (6mm to 9mm)diameter nylon line. Made of tough, sun-resistantplastic for many years of use. Helps tidy up yourboat. Don’t dock without it!

• Easy on, Easy off• Easy to adjust• No knots!• Strong material

SECURING STRAPS• Holds gear in place - Line coils, life vest,fish rods and deck chairs

• Turn snap opens and closes strap to lock item in place• White vinyl strap with plated brass swivel snaps. Pair.

Specifications:For Rail / Lifeline Mounts - Movable

Mfr. No. 71077ORDER NO. 459-71077

FENDER HEIGHT ADJUSTER• Raises or lowers boat fenders with ease!• Automatically locks in place at desired height• Eliminates tying and untying fender lines• Simple locking lever lets line slide down and lock in place• Handles: Hollow braid lines up to 1/2" diameter

Solid braid lines up to 3/8" diameter• Tough glass reinforced nylon, rust free brass serratedlocking ball.

• U.S. Patent #344671

Specifications:For Rails and Life LinesVinyl strap with easy on-off mounts

Mfr. No. 71080ORDER NO. 459-71080

LINE STRAPTough and durable PVC mounting strap, snaps overrailings, lifelines or stanchions. Allows fenders orlines to be conveniently retrieved or stored quickly.

1 per pack.ORDER NO. Mfr. No. Description440-91541 91-541-F White440-91546 91-546-F Black440-91549 91-549-F Navy blue

FENDER MATEInjection Molded NylonThe latest in fender brackets made of marine gradereinforced nylon. Clamps securely onto both 7/8”and 1” round tubing and 3/16” and 1/4” life line wire.Unique double locking action locks clamp onto rail or wireand still allows full adjustment of the fender. When theproper height is reached, the final locking action clamps therope quickly and securely.

ORDER NO. Mfr. No. A (Line size)423-27200 327200-1 1/4" - 5/16"

FENDER MATE P.O.P.Place on the counter or hang on peg board with theincluded custom rack. Contains 10 Pcs.ORDER NO. 423-27200-5 Mfr. No. 327200-5

For more information see: www.davisnet.com

For more information see: see www.sea-dog.com

For more information see: www.garelick.com

ORDER NO. 510-00393 Mfr. No. 393

FENDER HANGER

For more information see www.dockedge.com

FENDER ACCESSORIES

418

FENDER CLEATBrass Chrome Plated.

ORDER NO. Mfr. No. A B C Fast. Fits

426-72510 672510-1 1-5/16" 5/16" 1" # 8 FH 1/8" Line

426-72520 672520-1 1-1/4" 7/16" 1-5/16" # 8 FH 3/8" Line

ORDER NO. Mfr. No. A B C D Fast.

426-72550 672550-1 2-1/8" 7/8" 1-1/8" # 8 FH # 4 FH

FENDER HOOKSand Cast Brass Chrome Plated.

JUNIOR CLAM CLEATSORDER NO. 032-70060 - Black.ORDER NO. 032-70070 - White.

Both are 2 per package with screws.

621- 12990

LINE MASTER MOORING SNUBBERSFalcon Line-Master Mooring Snubbers stretch to more than twicetheir length if necessary, to absorb shock loads and protect boats,cleats and lines from the strain of winds and waves. Highly resilientEPDM rubber is resistant to sunlight, salt, water and ozone. It willnever discolour or damage a boat. Unique, injection molded nylonlocking system provides 100% safe and secure locking of the lines,with no hardware required. The harder the line is pulled, the tighterthe grip. No slipping, ever.

• Easy to fit - variable resilience• Keeps boat stable when moored- ideal for overnight trips

• Unprecedented 5-year replacementwarranty

COAMING SLIDEORDER NO. 032-70040Black. 2 per package with screws.

STERN SLIDENo moving parts to jam rope.ORDER NO. 032-70030Black. 2 per package with screws.

FENDER CLEATSPlastic - No sharp edges to catch or cut.ORDER NO. 032-70010. Black. 6 per package.ORDER NO. 032-70020. White. 6 per package.

ORDER NO. Mfr. No. Decsription466-00001 LLM1 Line Master No.1 (3/8" Line)466-00002 LLM2 Line Master No.2 (5/8" Line)466-00003 LLM3 Line Master No.3 (3/4" Line)466-00004 LLM4 Line Master No.4 (1" Line)

FENDER LOCKChrome plated zinc.The eye is to be permanently attached to the fender line.I.D. Eye: 3/8" / O.D. Flange: 1-1/2" / Screw Size: # 8.

Fender LockMfr. No.1299 DP CHRORDER NO. 621-12990 2pc./card

Spare EyeMfr. No. 1299 DP099AORDER NO. 621-12999-2 2pc./card

For more information see: www.falconsafety.com

For more information see: www.perko.com

For more information see www.sea-dog.com

FENDER RING

Use the Fender Ring to quickly attach a fender to yourScotty rod holder mounts. Easy to insert and remove.Inside diameter of ring is 7/8".

ORDER NO. 382-03270(2 /Pkg)

ORDER NO. 382-03271Bucket of 50.

For more information see: www.scotty.com

CLAMCLEAT for 4 - 8mm (5/32" - 5/16") rope• The rope drops down into the teeth to give a quick, positive lock that is easy to release•UV resistant• Can be fixed to horizontal or vertical surfaces• Can be fitted on dinghies and kayaks

CLAMCLEATS for 6 - 12mm (1/4" - 1/2") rope•UV resistant • Can be fixed to horizontal or vertical surfaces

ORDER NO. Mfr. No. Description Material A B C Rope FastenerSize Size

420-02090 002090-1 Midi,Black Nylon 2-7/8" 2-1/8" 3/4" 5/32"-5/16" #10 FH

CLAMCLEAT for 4 - 8mm (5/32" - 5/16") rope•UV resistant• The side fixing gives a short length, ideal on a narrow surface.• Cleat is used to hold anchor lines on small fishing rafts and ropes in window frames


420-02150 002150-1 Side-Fixing Midi,Black Nylon 1-1/12" 1-1/8" 1-11/16" 5/32"-5/16" #10 FH

CLAMCLEAT for 10 - 16mm (3/8" - 5/8") ropeThe rope drops down into the teeth to give a quick, positive lock that is easy to release.• UV resistant • Can be fixed to horizontal or vertical surfaces


420-02050 002050-1 Major,Black Nylon 4-13/16" 3-3/4" 1-7/16" 3/8"-5/8" #16 FH


420-02600 002600-1 Line-Lok®, Black Nylon 1-1/4" NA 3/8" 1/16"-3/16" NA420-02603 002603-1 Line-Lok®, White Nylon 1-1/4" NA 3/8" 1/16"-3/16" NA

420-02030

420-02090

420-02150

420-02010

420-02050

420-02600

420-02610

420-02060

420-02070

420-02190

420-02140

420-02130

420-02111

420-02040

419

ROPE CLEATS

For more information see: www.clamcleat.com www.sea-dog.com


420-02010 002010-1 Vertical,Black Nylon 3-3/4" 2-13/16"1-1/8" 1/4"-1/2" #14 FH420-02060 002060-1 Lateral (Starboard),Black Nylon 3" 2" 1-15/16" 1/4"-3/8" #14 FH420-02070 002070-1 Lateral (Port),Black Nylon 3" 2" 1-15/16" 1/4"-3/8" #14 FH420-02190 002190-1 Racing Vertical,Silver Aluminum 3-9/16" 1-15/16"2-13/16" 1/4"-1/2" #14 FH

LINE-LOK® TENT CLEATSManufactured from a material that improves its performance the colder it gets, this cleat is the ideal choicefor holding guylines in winter conditions.The design locks the rope so it will not slip in windy conditions, yet is easy to release.• Ideal for bimini tops, boat covers, tents gazebos, shelters, and radio masts and aerials etc.

POWER GRIP 1 CLEAT for 1 - 6 mm (1/32" - 1/4") rope• For single handed use, allows you to pull twice the load • No more sore hands


420-02610 002610-1 Power Grip 1 Aluminum 3-3/4" - 11/16" 1/8"-1/4" NA

CLAMCLEATS for 1 - 6mm (1/32" - 1/4") rope• (420-02030 & 420-02111) Mounts on flat or curved surfaces• (420-02040 & 420-02130, 420-02140) Mounts on horizonta or vertical surfaces


420-02030 002030-1 Junior,Black Nylon 3-1/4" 2-5/8" 11/16" 1/8"-1/4" #8 FH420-02040 002040-1 Mini,Black Nylon 2-1/16" 1-7/16" 5/8" 1/8"-1/4" #8 FH420-02111 002111-1 Racing Junior,Silver Aluminum 3-1/4" 2-5/8" 11/16" 1/8"-1/4" #10 FH420-02130 002130-1 Fine Line (Starboard),Black Nylon 2-3/4" 1-15/16" 13/16" 1/16"-3/16" #8 FH420-02140 002140-1 Fine Line (Port),Black Nylon 2-3/4" 1-15/16" 13/16" 1/16"-3/16" #8 FH

420-02603

For more information see: www.bridgelineropes.com

MOORING SNUBBERSAn ideal shock absorber for small boat mooringand docking lines. Eases the strain on mooringlines from wind or tides. High tensile rubber thatresists salt, oils, acids. Line loop preventsoverstretching of rubber snubber. Limitedstretch does not over stress rubber snubber, yetallows lines to remain tight when relaxed.Length: 22" - WhiteORDER NO. 109-99473 (pair)

ORDER NO. Dia. Length Sold As

FENDER LOOPS

White Hollowbraid Polypropylene108-00123 1/4'' 14'' 3 Pk.108-00283 1/4'' 16'' 3 Pk.108-00293 1/4'' 18'' 3 Pk.


FENDER LINES w/LOOPBurgundy Braided Nylon

108-00898 3/8'' 4ft 2 pk108-00908 3/8'' 6ft 2 pk

Forest Green Braided Nylon108-00899 3/8'' 4ft 2 pk108-00909 3/8'' 6ft 2 pk

Navy Braided Nylon108-00914 3/8'' 4ft 2 pk108-00915 3/8'' 6ft 2 pk

FENDER LOOPS/FENDER LINES

For more information see: www.dockedge.com

For more information see: www.attwoodmarine.com

MOORING SNUBBERSFor Secure and Cushioned MooringIdeal for both motor and sailing boats.The forces the line is exposed to, are taken upby the elongation of the mooring snubber,reducing the shock load on the line as well asthe boat’s hardware.

ORDER NO.440-90302 For line sizes 3/8” - 7/16” & craft up to 20 Ft.440-90304 For line sizes 7/16” - 5/8” & craft up to 26 Ft.440-90306 For line sizes 9/16” - 3/4” & craft up to 40 Ft.

MOORING SNUBBERS/FENDER LINES

420


FENDER LINES w/LOOPWhite Braided Nylon

108-00901 3/8'' 4ft 2 pk108-00902 3/8'' 6ft 2 pk

Black Braided Nylon108-00903 3/8'' 4ft 2 pk108-00900 3/8'' 6ft 2 pk

Blue Braided Nylon108-00904 3/8'' 4ft 2 pk108-00906 3/8'' 6ft 2 pk

ANCHOR LINES-WHITEDOUBLE BRAID NYLON

3/8" X 50' White 108-00804

3/8" X 100' White 108-00201

3/8" X 100' Black 108-61001

3/8" X 150' White 108-00202

3/8" X 150' Black 108-61501

1/2" X 150' White 108-00203

1/2" X 200' White 108-00204

1/2" X 150' White 108-00205

5/8" X 150' White 108-00206

ANCHOR LINES-WHITETWISTED NYLON

3/8" X 50' 108-00805

3/8" X 100' 108-00932

3/8" X 100' 108-00933

3/8" X 150' 108-00190

3/8" X 150' 108-00200

DOCK/MOORING LINESWHITE TWIST NYLON

3/8" X 10' 108-00141

3/8" X 15' 108-00150

3/8" X 20' 108-00160

1/2" X 20' 108-00161

1/2" X 25' 108-00162

DOCK/MOORING LINESWHITE HOLLOWBRAIDPOLYPROPYLENE

3/8" X 10' 108-00130

3/8" X 15' 108-00140

WHITE NYLON (REELS)TWISTED

1/4" X 650' 108-00090

NYLON DOUBLE BRAID

WHITE (REELS)

1/4” X 600’ 108-00260

5/16” X 600’ 108-00262

3/8” X 600’ 108-00311

1/2” X 600’ 108-00321

BLUE (REELS)

3/8” X 600’ 108-00850

1/2” X 600’ 108-00853

BLACK (REELS)

3/8” X 600’ 108-00851

1/2” X 600’ 108-00854

POLYESTER YACHT BRAID (REELS)

WHITEW/BLACKTRACER

W/GREENTRACER

W/REDTRACER

W/BLUETRACER

1/4” X 600’ 108-00230 108-00856 108-00857 108-00858 108-00859

5/16” X 600’ 108-00868 108-00873 108-00874 108-00875 108-00876

3/8” X 600’ 108-00871 108-00860 108-00861 108-00862 108-00863

7/16” X 600’ 108-00869 108-00878 108-00879 108-00880 108-00881

1/2” X 600’ 108-00872 108-00864 108-00865 108-00866 108-00867

5/8” X 600’ 108-00882

DOCK/MOORING LINES

SIZE WHITE BLACK BLUE BURGUNDY FOREST GREEN NAVY GOLD/WHITE

DOCK/MOORING LINES - DOUBLE BRAID NYLON

3/8” X 10’ 108-00163 108-00807 108-00806 108-00705 108-00716 108-00934

3/8” X 15’ 108-00170 108-00330 108-00701 108-00706 108-00717 108-00935 108-00430

3/8” X 20’ 108-00180 108-00340 108-00702 108-00707 108-00718 108-00936 108-00440

1/2” X 15’ 108-00184 108-00350 108-00809 108-00708 108-00719 108-00937 108-00450

1/2” X 20’ 108-00181 108-00360 108-00812 108-00709 108-00720 108-00938 108-00460

1/2” X 25’ 108-00182 108-00816 108-00815 108-00710 108-00721 108-00939

1/2” X 30’ 108-00183 108-00830 108-00831 108-00711 108-00722 108-00940

5/8” X 25’ 108-00051 108-00819 108-00818 108-00712 108-00723 108-00941

5/8” X 30’ 108-00052 108-00821 108-00824 108-00713 108-00724 108-00942

5/8” X 35’ 108-00053 108-00822 108-00825 108-00714 108-00725 108-00943

5/8” X 40’ 108-00054 108-00823 108-00826 108-00715 108-00726 108-00944

FENDER LINE DOUBLE BRAID NYLON – 2/PK

3/8” X 4’ 108-00901 108-00903 108-00904 108-00898 108-00899 108-00914

3/8” X 6’ 108-00902 108-00900 108-00906 108-00908 108-00909 108-00915

ANCHOR LINES

BULK ROPE

421

MOORING LINES/ANCHOR LINES/ROPE

For more information see: www.bridgelineropes.com

STARTER ROPESORDER NO. Size Dia. Length108-00380 # 4 1/8" 250'108-00390 # 5 5/32" 250'108-00400 #7 7/32” 250’

For more information see: www.marinetechproducts.com

YELLOW TWISTEDPOLYPROPYLENEORDER NO. Dia. Length/Ft108-00020 1/4" 1300'108-00030 5/16" 975'108-00040 3/8" 630'108-00050 1/2" 335'

ORDER NO. Dia. Length/Ft108-00410 1/4" 50'108-00420 3/8" 50'

ALUMINUM FIDSThreaded end. Needs no push rod.Will splice double braid rope only.

ORDER NO. Mfr. No. Dia.108-00924 FD 04 1/4"108-00925 FD 05 5/16"108-00926 FD 06 3/8"108-00927 FD 07 7/16"108-00928 FD 08 1/2"108-00930 FD 10 5/8"

FLOATING SAFETY ROPE(Double Braided Polypropylene)(Yellow w/Orange Tracer)ORDER NO. Dia. Length/Ft108-00490 3/8" 300'

HOLLOWBRAID(Blue/White)ORDER NO. Dia. Length/Ft108-00210 1/4" 1000'

HANDY COILS - (Polypropylene)

STARTER ROPE & HANDLEUniversal Starter Rope & Handle - (Uses 9/64" Rope), #4.5ORDER NO. 018-49040

HANDLE ONLYORDER NO. 018-49010

STARTER ROPES (200' SPOOL)ORDER NO. Dia./Length OEM #018-49110 5/32" x 200' OMC 322236018-49130 3/16" x 200' OMC 316705018-49140 1/8" x 200' MOC 316706

947-57061

Panther’s portable rope cutting gun is ideal for boat, camper andhome use. The handle fits in the palm of your hand with easy fingerpull operation. It makes quick clean cuts in all types of syntheticropes, line and strapping.• Lightweight - 1.5 Ibs.• Overall Dim: 6"L x 6"H x 2"D• Operates from 120V AC• Complete w/ 4 ft. cord

TWISTED CO-POLYMER ROPE – OrangeBlending polypropylene & high modulus polyethylene resins produce the co-polymer fiber used in making thispremium industrial rope.• 35% stronger and has many times the abrasion resistance of conventional polypropylene products,

with low-elongation characteristics equivalent to pure polyester• Bright orange colour offers the additional benefit of use as a barrier rope, where safety is a concern• UV resistant• Resistant to acids and alkalis, oil and gas• Increased tensile strength – 900 lbs• Floats• Can be spliced

ORDER NO. Dia. Length/Ft108-00060 3/16” 2125’/Reel

For more information see: www.bridgelineropes.com www.teleflexmarine.com

STARTER ROPES PANTHER PORTABLE ROPE CUTTER

ORDER NO. Mfr. No. Description947-57060 75-7060 Portable Rope Cutter947-57061 75-7061 Replacement Blades

ROPES AND ACCESSORIES

422

SEAHOOK SH ANCHORHot Dipped Galvanized Stamped Steel

ORDER NO. Mfr. No. Weight Recomm A B CLbs Boat Length

423-17008 317008 7.8 lb. 12' - 22' 20-1/2" 15" 10-1/2"423-17010 317010 9.5 lb. 16' - 26' 22-1/2" 16" 12"423-17014 317014 12.1 lb. 20' - 32' 25-1/2" 18" 13"423-17018 317018 17.6 lb. 28' - 34' 30" 18" 16"423-17022 317022 21.4 lb. 32' - 40' 34" 22" 17"

For more information see: www.canadametal.com


423

ANCHORS/ANCHOR CHAIN

0RDER NO. Mfr. No. Weight Recomm A B C DLbs Boat Length

423-19011 319011 11.02 lb. 16' - 23' 21-1/4" 7-1/2" 10-5/8" 8-1/4"423-19015 319015 15.43 lb. 16' - 26' 23-1/4" 8-5/8" 12-3/16" 9"423-19020 319020 19.84 lb. 16' - 29' 27-9/16" 9" 13-3/8" 10-1/4"423-19026 319026 26.45 lb. 16' - 32' 28-3/4" 9-7/16" 14-7/16" 10-5/8"423-19033 319033 33.06 lb. 25' - 45' 33-7/8" 10-5/8" 15-3/4" 11-7/16"

PLOW ANCHORHot Dipped Galvanized Steel

WATER SPIKE ANCHOR• Made of 1/4" plated steel• Completely collapsible• Unmatched holding power• Incredibly light weight

ORDER NO. Mfr. No. Description945-59200 55-9200 Up to 16' boat - 7 Ibs.945-59300 55-9300 Up to 22' boat - 10 Ibs.945-59400 55-9400 Up to 35' boat - 13 Ibs.

G30 ISO PROOF COIL - General Purpose G43 ISO HIGH TEST CHAIN - Calibrated for Windlasses

ORDER NO. Description Container300-18751-250 G30 ISO HDG CHN 3/16" x 250' Plastic Pail300-18751-800 G30 ISO HDG CHN 3/16" x 800' 1/2 Drum300-25100-141 G30 ISO HDG CHN 1/4" x 141' Plastic Pail300-25100-400 G30 ISO HDG CHN 1/4" x 400' 1/2 Drum300-31251-092 G30 ISO HDG CHN 5/16" x 92' Plastic Pail300-31251-275 G30 ISO HDG CHN 5/16" x 275' 1/2 Drum300-37500-063 G30 ISO HDG CHN 3/8" x 63' Plastic Pail300-37500-200 G30 ISO HDG CHN 3/8" x 200' 1/2 Drum

ORDER NO. Description Container430-25100-400 G43 ISO HT CHN 1/4" x 400' 1/2 Drum430-31250-275 G43 ISO HT CHN 5/16" x 275' 1/2 Drum430-37500-200 G43 ISO HT CHN 3/8" x 200' 1/2 Drum

SEAHOOK SH ANCHORThe SeaHook SH Series class of anchor is a popular light-use anchor. It has L-shaped flukes with a shovel-like tip which provides quickpenetration and maximum holding power. The solid untapered shank provides greater weight distribution at the end of the shank to help keep itparallel with the bottom. The 15˚ tapered stock increases holding power while allowing debris to slide off when retrieving the anchor.

ISO High Test Chain uses high tensile strength carbon steel thatprovides a greater strength-to-weight ratio than proof coil chain.ISO short pitch link which makes it more flexible and ideally suited as awindlass chain. Each link is proof tested and calibrated.Check manufacturer’s specification prior to purchase

Performs well in sand, rock, mud and weeds. Add a line to the eye on the horn for easy retrieval. Hinged shank helps anchor stayset during wind shifts. Heat treated type C1035 steel.

ISO Proof Coil Chain is low carbon steel generalpurpose/anchor chain with an ISO short pitch link. Used inapplications where high tensile strength is not required

For more information see: www.sea-dog.com

NAVY ANCHORSReally digs in and holds the minute it strikes bottom!

SLIP RING ANCHORSThe Greenfield Slip Ring Anchor is made ofsolid steel, is self-releasing, lightweight, easyto store, and coated in heavy no-mar resistantplastisol, which protects boat finishes.

Note: Holding power may vary depending onwindage & conditions

RIVER ANCHORSEspecially designed for river andmud bottom lakes.Great for pontoon & bass boats.

CoatedAnchors are coated in a heavy no-mar resistant plastisol coating.

ORDER NO. Mfr. No. DESCRIPTION

937-66906-1 669-6-B #6 Black

937-66906-5 669-6-R #6 Royal Blue

937-66906-6 669-6-RD #6 Red

937-66906-7 669-6-T #6 Teal

937-66906-8 669-6-W #6 White

937-66906-9 669-6-Y #6 Yellow

937-66911-1 669-11-B #11 Black

937-66911-5 669-11-R #11 Royal Blue

937-66911-6 669-11-RD #11 Red

937-66911-7 669-11-T #11 Teal

937-66911-8 669-11-W #11 White

937-66911-9 669-11-Y #11 Yellow

ORDER NO. Mfr. No. COLOUR SIZE

937-51401 514-B Black 14 lbs.937-51601 516-B Black 16 lbs.937-52001 520-B Black 20 lbs.


Suitable for boats to 20’937-00618 618-B Black 18 lbs.

Suitable for boats to 30’937-00625 625-B Black 25 lbs.

Mfr. No. WEIGHT RECOMMENDED BOAT SIZE

669-6 6 lbs. Up to 15 ft.

669-11 11 lbs. Up to 20 ft.

PaintedAnchors are painted with a special rustresistant aluminum paint.

ORDER NO. Mfr. No. SIZE

937-33310 333-10 10 lbs.937-33315 333-15 15 lbs.937-33320 333-20 20 lbs.


937-91001 910-B Black 10 lbs.

937-91005 910-R Royal Blue 10 lbs.

937-91006 910-RD Red 10 lbs.

937-91501 915-B Black 15 lbs.

937-91505 915-R Royal Blue 15 lbs.

937-91506 915-RD Red 15 lbs.

937-91508 915-W White 15 lbs.

937-91509 915-Y Yellow 15 lbs.

937-92001 920-B Black 20 lbs.

937-92005 920-R Royal Blue 20 lbs.

937-92006 920-RD Red 20 lbs.

CoatedAnchors are coated in a heavy no-mar resistant plastisol coating.

RICHTER ANCHORSThe ultimate high performance anchor for allapplications. Patented design combines theweight of a river anchor, penetration of agrapnel anchor and the easy retrieval of aslip-ring anchor. Unmatched performance inany situation. Richter Anchors are currentlybeing used by over 200 tournamentfishermen worldwide.

333-10

ANCHORS

424For more information see: www.greenfieldproducts.com

MUSHROOM ANCHORSA type preferred by many experienced boaters.

MARINE RETRIEVAL MAGNETIncredibly strong magnet rated at over 200 lbs. pull. Ideal for retrieving dropped tools,keys, props, etc. Also great for the treasure hunter seeking loot.

Colour: Thick-coated, Red.ORDER NO. 937-00007 Mfr. No. 7-RD

PaintedAnchors are painted with a special rust resistantaluminum paint. Silver.

CoatedAnchors are coated in a heavy no-mar resistant plastisolcoating. (Protects bass boat finishes.)

Selection GuideMfr. No. Working Load Limit Recommended Boat SizeGPI-13 900 lbs. For boats up to 33 ft. in winds up to 30 knotsGPI-17 1200 lbs. For boats up to 38 ft. in winds up to 30 knotsGPI-21 1500 lbs. For boats up to 41 ft. in winds up to 30 knots

ORDER NO. Mfr. No. COLOUR SIZE WORKING LOAD LIMIT

937-21151 2115-B Black 1/4" x 4 ft. 1,300 lbs.

937-21152 2115-FG Forest Green 1/4" x 4 ft. 1,300 lbs.

937-21155 2115-R Royal Blue 1/4" x 4 ft. 1,300 lbs.

937-21156 2115-RD Red 1/4" x 4 ft. 1,300 lbs.

937-21157 2115-T Teal 1/4" x 4 ft. 1,300 lbs.

937-21158 2115-W White 1/4" x 4 ft. 1,300 lbs.

937-21161 2116-B Black 5/16" x 5 ft. 1,370 lbs.

937-21165 2116-R Royal Blue 5/16" x 5 ft. 1,370 lbs.

937-21166 2116-RD Red 5/16" x 5 ft. 1,370 lbs.

937-21168 2116-W White 5/16" x 5 ft. 1,370 lbs.

ANCHOR CHAINS PVC COATEDSpecially formulated vinyl coating protects boat finishes while allowing good flexibility.

ORDER NO. Mfr. No. SIZE

937-44480 444-8 8 lbs.937-44410 444-10 10 lbs.937-44415 444-15 15 lbs.


937-50801 508-B Black 8 lbs.937-51001 510-B Black 10 lbs.937-51501 515-B Black 15 lbs.

508-B

ORDER NO. Mfr. No. DESCRIPTION

937-00131 GPI-13-B #13 Black

937-00138 GPI-13-W #13 White

937-00136 GPI-13-RD #13 Red

937-00175 GPI-17-R #17 Royal Blue

937-00178 GPI-17-W #17 White

937-00218 GPI-21-W #21 White

937-00216 GPI-21-RD #21 Red

For more information see: www.greenfieldproducts.com425

ANCHORS & ACCESSORIES

AMERICAN YACHTING SERIESTraditional Fluke-Type anchor modified to include PVCcoating. Holding power is rated for higherperformance applications.For best results, use with Greenfield Anchor Chain.


426

ANCHOR DISPLAY - 6938

Features:Attractive powder coated black structuralsteel frame, colorful and informative twosided 48" x 16" header.Display capacity of approximately 20anchors, requires only 16 sq. ft. of floorspace, adjustable racks to accommodatevarious inventory mix, secure designprovides for retail display safety.Packed 1 per carton.

Anchor Display Rack OnlyMfr. No. 6938ORDER NO. 123-69380

Model No. A B C RecommendedORDER NO. & Weight Anchor Stock Fluke Boat*

Rating Length Length Length Length123-05405 5E 11-1/2" - 29cm 10-3/4" - 27cm 8-1/2" - 22cm 10' to 15'123-06912 7E 14" - 36cm 11-3/4" - 30cm 9" - 23cm 15' to 19'123-05610 10E 15-1/2" - 39cm 13" - 33cm 9-1/2" - 24 cm 20' to 24'123-06916 13E 17-5/8" - 45cm 15-3/4" - 40cm 11-1/4" - 29cm 25' to 28'123-09615 15E 20-1/2" - 52cm 15-3/4" - 40cm 13" - 33cm 28' to 30'

Model No. A B C RecommendedORDER NO. & Weight Anchor Length Stock Length Fluke Length Boat* Length

in/cm in/cm in/cm in/cm in/cm123-06921 2-1/2 16-5/8" - 42cm 13" - 33cm 9" - 23cm Up to 12'123-06922 4 19-1/4" - 49cm 14-3/4" - 37cm 9-1/2" - 24cm 12' to 16'123-06923 8 20-3/4" - 53cm 15-3/4" - 40cm 11-3/4" - 30cm 17' to 24'123-06924 13 24-1/4" - 62cm 18-1/4" - 46cm 14-1/2" - 37cm 25' to 30'123-06925 18 26-3/4" - 68cm 21-1/2" - 55cm 16-1/2" - 42cm 31' to 34'123-06926 22 34-3/8" - 87cm 26-3/4" - 68cm 19" - 48cm 35' to 38'

382-02780

Permanent Mount382-02760Includes a No. 241 Side /Deck Mount

ANCHORSThe D-L Anchor line consists of twostyles of penetrating design anchors.Sentinel design anchors incorporatea combination of fluke shape andangle to provide superior bottompenetration. Each D-L anchor iscarefully hot dip galvanized for themaximum in corrosion resistance.

*For storm anchors or houseboats,use one size larger than

recommended.Dimensions have a ±1/4" tolerance

For more information see: www.scotty.com

For more information see: www.dutton-lainson.com

The Sentinel® Slip Ring anchorfeatures a single piece crownconstruction enhancing thestrength of the anchor,uniquely formed flukesprovide more rigid penetration,and a slip-ring design forretrievability. Galvanized.

SENTINEL® SLIP RING ANCHOR

SENTINEL® DELUXE ANCHOR

The Sentinel® Deluxe anchor uses atraditional lightweight design.The strong, wide flukes penetratequickly and firmly for maximumholding power. A fully weldedcrown configuration providesthe properly engineered anglesfor ultimate holding powerand secure penetration.Galvanized.

ANCHOR LOCKAnchor release system for small boats in still-water fishing situations. Easy lockand release action allows anchor line adjustments. For use with rope up to 1/2"diameter. Tough construction and roller bearing for smooth, quiet operation.

No. 276 - Includes No. 241 Side/Deck MountNo. 277 - Includes No. 244 Flush Deck MountNo. 278 F - Permanent Mount

ORDER NO. 382-02760 Mfr. No. 276ORDER NO. 382-02770 Mfr. No. 277ORDER NO. 382-02780 Mfr. No. 278F

382-02770Includes a No. 244 Flush Deck Mount

ORDER NO. Weight Boat Recomm. Recomm. ALbs. / Kg. Length Line / Length Chain / Length

423-18001 1.5 lbs / 0.7 kg 5'-10' 1/4" / 35' 3/16" / 7-10' 1/2"423-18003 3.5 lbs / 1.5 kg 5'-12' 1/4" / 35' 3/16" / 7-10' 1/2"423-18005 5.5 lbs / 2.5 kg 5'-14' 5/16" / 50' 3/16" / 7-10' 1/2"423-18007 7.0 lbs / 3.2 kg 5'-16' 5/16" / 50' 3/16" / 7-10' 1/2"423-18009 9.0 lbs / 4.0 kg 5'-18' 5/16" / 120' 3/16" / 10-13' 1/2"423-18013 13.0 lbs / 6.0 kg 14'-22' 3/8" / 150' 3/16" / 10-20' 5/8"423-18018 18.0 lbs / 8.0 kg 18'-26' 3/8" / 150' 1/4" / 10-20' 5/8"

FOLDING ANCHORSHot Dipped Galvanized Iron/Forged Flukes

Inexpensive and easy to store, folding anchors make an ideal backup anchoron larger boats or can be used as a primary anchor on smaller boats,sailboats and inflatable boats.

THE SEA-HOOKHot Dipped Zinc Galvanized Investment Cast Steel

ANCHOR CHOCKSSand Cast Brass Chrome PlatedAnchor Size: 5 - 25 lbs.Fastener: # 10 FHMfr. No. 322100-1ORDER NO. 423-22100

A

BC

Galvanized Forged Steel

ORDER NO. Mfr. No. A B C Chain Link Size

423-12833 312833 3 ft 1-1/16" 1-1/16" 3/16"

423-12844 312844 4 ft 1" 1-1/8" 1/4"

423-12855 312855 5 ft 1-3/8" 1-1/4" 5/16"

Forged Steel / PVC Coated

423-12956 312956 6 ft 1-7/16" 1/-3/16" 3/8"

ANCHOR CHAIN

ORDER NO. Mfr. No. A B C Recomm. WeightBoat Length. Llbs.

423-18503 318503 16" 10-1/4" 8-11/16" 13'-18' 7.7423-18505 318505 18-7/16" 12-3/8"' 9-7/16" 19' - 23' 11.0423-18507 318507 20-15/16" 14-3/16"' 10-3/4" 24' - 30' 16.5423-18510 318510 22-15/16" 15-1/8" 11-1/2" 31' - 35' 22.0423-18515 318515 25-3/4" 17" 13-7/16" 36' - 40' 33.0423-18520 318520 27-5/8" 18" 14-5/8" 41' - 47' 44.0

“LIFT ’N LOCK” ANCHOR CONTROLEasy-to-use anchor lift and pulley system supports an anchor up to20 pounds with 1/2" diameter line (sold separately).Economical zinc plated steel anchor lift and nylon pulley system.Steel sheave controls anchor from any position.

Mfr. No. 13700-3 Order No. 101-13700 - Standard


For more information see: www.attwoodmarine.com427


WAVE STAKE ANCHORS - Self-releasing fluke type designRecommended in most conditions and for light / medium duty Self-releasing Fluke Type Design, Penetrating, Steel,Easy Retrieval. The unique, patented Wave Stake is the first anchor to offer the weight and performance of a castiron anchor in a collapsible design. Aggressive, low profile flukes dig and hold in nearly all conditions. High densityiron construction provides added weight for deep sets. To assemble, simply slide two plates together and attach bracket and shackle/pin.For storage, remove bracket and shackle and slide plates apart. Black.

PANTHER ANCHOR ROPEPanther anchor rope is manufactured with the outdoorsman in mind. Made from heavyduty 3/8” blue polypropylene it has an amazing tensile strength of 2800 lbs. Comespackaged with a no-tie rope cleat and snap hook. Available in both 50’ and 100’ lengths.

Order No. Mfr. No. Description947-75700 75-7000 50’ Anchor Rope, Cleat/ w/Snap Hook947-75701 75-7010 100’ Anchor Rope, Cleat/ w/Snap Hook

For more information see: www.greenfieldproducts.com

STRETCH n’ SLIDE - Versatile Dock & Rafting LineMulti-Loop Bungee for perfect size every time. Stretches to fit any span to 7 ft.Docking:Without question, Stretch n’ Slide is the world’s most versatile and easy to use dock line.Innovative multi-loop bungee allows a perfect fit for any span to 7 ft.Simply place end loop over cleat, stretch and tighten down the slider.Then just select perfect loop to place over second cleat.Stretch n’ Slide makes docking quick and easy for any craft from PWC to large boats.Temporary docking only.Rafting / Party Chaining:Stretch n’ Slide is the ultimate solution for Rafting boats together for party chain.The versatile loops allow quick and accurate connection between cleats, regardless of distance or elevation between boats.With Stretch n’ Slide a rafting party can be connected in minutes, without tying a single knot. Shock absorbing bungee allows entire chain ofboats to move and flex together with ease. Order No. 937-00001 Mfr. No. SNS (Black)

ORDER NO. Mfr. No. Working Recommended ScopeWeight Boat Size in Winds (Line Feet: Depth Feet)Pounds* Up to 30 Knots

937-70005 Wave-5-B 4-5 Ibs. PWC, Canoes 7:1Kayaks to 12'

937-70012 Wave-12-B 11-12 Ibs. < 18' 7:1937-70018 Wave-18-B 17-18 Ibs. < 24' 7:1

*Weights vary due to metal and coating content. Listed weights are approximate.

ANCHOR BUDDYThe Anchor Rope that StretchesPoly-covered bungee cord stretches from 14' to 50'. Anchor Buddy takes theshock out of your anchor line and makes it easier to anchor offshore. Simply dropanchor about 30' out, proceed to shore, and Anchor Buddy stretches while youranchor stays set. As you pay outyour bow line Anchor Buddyretracts, anchoring your boat safelyoffshore. Also works great foranchoring in rough water. Black.Order No. 937-04000-1Mfr. No. AB-4000-B

Disassemblesfor easy storage

DOCK BUDDYStretch Dock Line For Temporary Docking onlyDock Buddy is an easy to use dock line that stretches between boatcleat and dock cleat, without knots. A simple slide adjustmenttightens loop around cleat and allows for quick and secure docking.Dock Buddy stretches for more stability from waves while fueling orcooking at dock. Black.Order No. Mfr. No. Description937-00400-1 DB4-B Dock Buddy, 4', Black937-00500-1 DB5-B Dock Buddy, 5', Black

KWIK GRIP SELF-LOCKING CLEATTie loads without tying knotsIdeal for securing deck & dock lines, fenders, anchor & mooring linesand deck accessories.

• Works with any rope up to 1/2"• Made of durable 316 Stainless Steel• Corrosion resistant• Durable clear coat finish• Stainless mounting hardwareOrder No. 937-70112Mfr. No. R701-12


ANCHORS/DOCKING ACCESSORIES

428

C

B

A


FOLDING ANCHOR KITPainted Hot Dipped Galvanized Iron/Forged FlukesInexpensive and easy to store, the folding anchor kit makes an ideal backup anchor on larger boatsor can be used as a primary anchor on smaller boats, sailboats and inflatable boats. Includes 3.5 lb.folding anchor with 25' of 1/4" line, adjustable float and stainless fast eye boat snap.

ORDER NO. Mfr. No. Weight/Lbs. Boat Length Line/Length A B C423-18000K 318003K 3.5 lb. 5' - 12' 1/4"/25' 1/2" 25' 1"

HOOKER ANCHOR KITS

• 50 ft. (15m) Premium nylon line• 1.5 Ib. (0.6 kg) Folding Anchor• Watertight buoyant container- Doubles as a bailer

• Nylon snap hook, for easy attachment to vessel• For still water use

Order No. 382-00797

Recommended for boats up to 24 feet in length.For use in clean bottoms – sand/mud – and varying surf andwind conditions.

Kit Contains:• (1) 8 Sentinel® Deluxe Anchor• (2) 5/16” galvanized shackles• (1) 1/4” x 5 ft. galvanized chain• (1) 3/8” x 100 ft. nylon anchor line

Order No. 123-08000Mfr. No. 23635

For more information see: www.scotty.com For more information see: www.dutton-lainson.com

For more information see: www.tie-down.com429

ANCH0R KITS

797 ANCHOR KITS 8K DELUXE ANCHOR KITS

HOOKER QUIK-SET ANCHOR KITKit includes:(1) 10HQ Quik Set Anchor(1) Coil of 3/8" x 100' nylon anchor line w/thimble(1) Coil of 1/4" x 4' galvanized chain(2) 5/16" shackles

Mfr. #95090Order No. 404-95090

SUPER HOOKER #8 ANCHOR KITKit includes:(1) #8 Super Hooker Anchor,(1) Coil of 3/8" x 100' nylon anchor line w/thimble(1) Coil of 1/4" x 6' galvanized chain,(2) 5/16" shackles.

Mfr. #95095Order No. 404-95095

SUPER HOOKER #13 ANCHOR KITKit includes:(1) #13 Super Hooker Anchor,(1) Coil of 3/8" x 100' nylon anchor line w/thimble,(1) Coil of 1/4" x 6' galvanized chain,(2) 5/16" shackles.

Mfr. #95100Order No. 404-95100

For safe anchoring, a length of chain should be attached between your anchor line andanchor. This helps to keep the anchor shank low and allows the flukes to further

penetrate. Also guards against bottom chafe.

Order No. Mfr. No. A B C Rope Diameter Fastener423-28052 328052 6-1/4" 1-3/4" 2-1/2" 1" Max. 3/8" Bolt423-28059 328059 Replacement wheel (1-3/4" x 2-1/2")

Order No. Mfr. No. A B C Rope Diameter Fastener423-28054 328054 15-1/2" 1-3/4" 2-1/2" 1" Max. 3/8" Bolt423-28059 328059 Replacement wheel (1-3/4" x 2-1/2")

PLATFORM BOW ROLLERStamped 304 Stainless

BOW ROLLER-SHORT (Unpolished)Stamped 304 Stainless

BOW ROLLER - SEAHOOK STYLE (Unpolished)Stamped 304 Stainless

ANCHOR LIFT & LOCK BOW ROLLERElectrogalvanized Steel

Order No. Mfr. No. A B C Rope Diameter Fastener423-28040 328040-1 6-13/16" 13/16" 1-7/8" 3/8" Max. #10 RH

COMPLETE FOLDING ANCHOR SYSTEM• 3-1/3 Ib., 4 fluke folding anchor holds in mud, sand, gravel and rock• Designed for the temporary mooring of small boats, PWC, inflatable boats, canoes,sailboats, and float tube• Coated to protect finishes• Durable, nylon, padded storage bag is included• 25 ft. long marine-grade rope, with an in-line buoy is spliced to the anchor and a heavyduty stainless steel snap hook

Order No. 737-15764Mfr. No. A-2

LIGHTWEIGHT FLUKE ANCHOR• Vinyl dipped fluke anchor weighs 1-3/4 Ib.• Perfect for the temporary mooring of PWC’s and other small craft• 25 ft. marine grade rope is spliced to the anchor• Sturdy nylon case is included


PWC SAND ANCHOR & BUOY• Ideal for anchoring PWC’s in shallow water to keep the impeller off the beach• Fill this super durable tri-laminate anchor bag with up to 35 Ibs. of rocks or sand.• A buoy marks the anchor’s location• Tie-ups are easy with the 6 ft. long rope and the oversized, acetyl finish snap hook


For more information see: www.airhead.com


ANCHOR ROLLER/ANCHOR KITS

430

Order No. Mfr. No. A B C D Rope Diameter Fastener423-28051 328051 3" 1-3/4" 2-1/2" 6" 1" Max. 3/8" Bolt423-28059 328059 Replacement wheel (1-3/4" x 2-1/2")

Features 26' 36' 41' 46'ORDER NO. 409-77726 409-77736 409-77741 409-77746Mfr. No. P 77726 P 77736 P 77741 P 77746Powerwinch 26' Class 36' Class 41' Class 46' ClassAnchoring Speed N/A 250'/min. 300'/min. 300'/min.Pulling Power 525 lbs. 775 lbs. 900 lbs. 1100 lbs.Retrieval Speed 80'/min. 80'/min. 75'/min. 70'/min.Boat Size Up to 26' Up to 36' Up to 41' Up to 46'Warranty Full 2 year Full 3 year Full 3 year Full 3 year(Includes all components)

All Powerwinch Anchor Winches have the following features: • Internal drive shafts - Stainless steel• One-piece gears - heat treated / oil impregnated • Protect-a-deck gasket - 1/8" rubber • One-piece housing - cast aluminum

• Paint finish - Alodine/e-coat/nylon powder • Mounting template - included • Deck Mounted Design - saves space for rope locker• Country of origin - USA • Footprint - same for all units

Free Fall - The Fastest & Easiest Way To Anchor

• Patented Free Fall System anchors up to 350 ft./min.• Stainless Steel Rope & Chain Guidance System• Units From 525 - 1100 lbs. of Pulling Power• Units Available For Boats 20' -46'

*** See Next Page For Technical Specifications ***

Features & Benefits

• The Most Powerful Fishing & Pontoon Boat Anchor Winch• Six Times More Powerful Than Competition (200 lbs.)• The Fastest Line Speed For Quick Anchoring (80'/min.)• Lifts The Heaviest River & Lake Anchors Up To 40 lbs.• Automatically Retrieves & Spools The Anchor Line• Includes An Integrated Davit With Compact Design For Easy Installation• Includes 100' of 3/16" Line• Power Source 12V • Circuit Breaker 15 Amp• Two Year Warranty • Made in The U.S.A.• Anchor not included

FREE-FALL ANCHOR WINDLASSESAutomatic helm Operated FREE-FALL WINDLASSES

POWERWINCH 24' ROPE ANCHOR WINCH

- The #1 Selling Anchor Winch Designed For Fishing & Pontoon Boats- For Fishing & Pontoon Boats Up To 24 Ft.

ORDER NO. 409-77724Mfr. No. P77724

431

ANCHOR WINCHES

For more information see: www.powerwinch.com


ANCHOR WINCH SPECIFICATIONS

432

SPORT FISH 450 FREE-FALL WINDLASS

FREE-FALL ANCHOR WINDLASSES TECHNICAL SPECIFICATIONS

POWERWINCH 26' 36' 41' 46'FEATURES CLASS CLASS CLASS CLASS

Electro Electro ElectroRope & Chain System Rope only Plated Plated Plated

Aluminum Stainless Steel Stainless Steel Stainless SteelRope & Chain System finish Capstan-matte grey Electro-polished Electro-polished Electro-polishedLine size (required) Up to 5/8" 1/2" 5/8" 5/8"

Powerwinch Powerwinch PowerwinchLine type (required)* Nylon Premium Premium Premium

3-Strand Med. Lay Nylon Med. Lay Nylon Med. Lay NylonChain size (required) na 1/4" 5/16" 5/16"Chain type(required) na Hi-test ACCO G4 Hi-test ACCO G4 Hi-test ACCO G4Replaceable Rode-Glide deck insert na Engineered Resin Engineered Resin Engineered ResinHelm operated control switch Foot switch 409-10684 409-10684 409-10705Avg. amp draw (during retrieval) 8-12 amps 8-12 amps 10-14 amps 14-18 ampsAvg. amp draw (during FreeFall) 0 amps 0 amps 0 amps 0 ampsWire (run from battery to anchor winch) 8 gauge (50' run) 8 gauge (50' run) 6 gauge (70' run) 6 gauge (70' run)Fasteners Stainless steel Stainless steel Stainless steel Stainless steelSolenoid Sold separately Sold separately Sold separately IncludedBoat size Up to 26' Up to 36' Up to 41' Up to 46'Warranty (includes all components) Full 2 year Full 3 year Full 3 year Full 3 yearUnit weight (lbs) 20 22 23 24Rodes (sold separately)** na P10293-P10296 P10297-P10300 P10297-P10300Overall unit dimensions 10-9/16"L x 10-9/16"L x 10-9/16"L x 10-9/16"L x

8"W x 6-5/16"H 7"W x 6-5/16"H 7"W x 6-5/16"H 7"W x 6-5/16"H

Note: Rope & chain system includes gypsy, finger and stripper. **See Page 433 for Part Nos.*Powerwinch recommends New England Premium 3 Strand Nylon medium lay line as an alternative.Powerwinch recomends Ancor® Premium Marine Wire for installation.

ORDER NO. 409-77727

The Safest Way to Anchor Your Boat!Designed for all Sport Fishing Boats up to 27 feet. It has quick and safe one-person operation.

• Find the right fishing spot and hold your position.• Helm Operated Control Switch.Eliminates going to the bow in rough seas or severe weather conditions.

• Safe and easy one person operation.• Hold helm control switch in the downward position for only 5 seconds to release anchor.• Anchor sets quickly at 150’ per minute Free-Fall.• Fast Retrieval - retrieval rate is 70' per minute.ORDER NO. 409-77727Mfr. No. P77727

ACCESSORIESWaterproof Toggle Helm Switch (with Switch Plate)ORDER NO. 409-10684

433

ANCHOR WINCHES & ACCESSORIES

A.WATERPROOFSWITCH(for P77746 )P1070500AJORDER NO. 409-10705

B. WATERPROOFHELM SWITCHP1068400AJORDER NO. 409-10684

A B

ORDER NO. Mfr. No. DescriptionFor 30/31 & 35/36' Class FreeFall Anchor Winches

409-10294 P10294 15' of 1/4" Hi-test Chain & 200' of 1/2" Rope409-10295 P10295 15' of 1/4" Hi-test Chain & 300' of 1/2" RopeFor 40/41 & 45/46' Class FreeFall Anchor Winches

409-10299 P10299 20' of 5/16" Hi-test Chain & 250' of 5/8" Rope409-10300 P10300 20' of 5/16" Hi-test Chain & 300' of 5/8" Rope

DECKHAND 25RThe Deckhand 25R’s new 12 ft. corded remote control lets you operate yourDeckhand from anywhere on the boat• 25 lb. anchor capacity (anchor not included)• Includes davit for stowing most styles of anchors• Pre-spooled with 60 ft. of 800 lb. test nylon rope• Runs on 12 volt battery (not included)Mfr. No. 1810126ORDER NO. 718-10126

Mfr. No. 1810140ORDER NO. 718-10140

DECKHAND 40Why do all the work when a Deckhand will do it for you?These electric winches will automatically raise or lower your anchor at the touch of a button.A special anti-drag system senses the bottom to allow for controlled drifting.• Davit can be mounted at base of Deckhand or in remote position on boat deck• 40-lb anchor capacity (anchor not included)• Pre-spooled with 100 ft. of 800 lb test nylon rope• Universal davit stows anchor horizontally to eliminate anchor swing• Anchor shackle allows for quick changes between anchors• Runs on 12 volt battery (not included)• Compatible with Deckhand 40 remote switch (sold separately)

SOLENOIDS & SWITCHES

DECKHAND ANCHOR WINCHES

FREE-FALL ANCHOR WINCH ROPES• Required for Powerwinch Free-Fall anchor winches.• All rodes come with a tapered backsplice.• 1/2" & 5/8" Powerwinch premium 3 strand nylon line, tested to be the highest quality& best performing line.

• Acco G4 Hi-Test 1/4" & 5/16" chain- 1/4" Hi-Test offers 50% more strength than 1/4" BBB- 5/16" Hi-Test offers 47% more strength than 3/8" BBB- 5/16" Hi-Test offers twice the strength of 5/16" BBB

DECKHAND 40REMOTE SWITCH25’ cord allows you to operate the Deckhand 40from anywhere on the boat

Mfr. No. 1810150ORDER NO. 718-10150


For more information see: www.minnkotamotors.com

For more information see: www.southpacific.com.au

WINDLASSES

434

SPECIFICATIONS 710 Hs / Power Out 800H / 800F 900 MightyBoat Size 4.5-6m (15-20 ft.) 6-9m (20-30 ft.) 8.4-13.5m (28-45 ft.)Operating Voltage 12V DC 12V DC 12V DC or 24V DCMax. Work Load 120 kg (265 Ib.) 275 kg (600 Ib.) 500 kg (1100 Ib.)Typical Working Load 20 kg (45 Ib.) 40 kg (90 Ib.) 72 kg (160 Ib.)Retrieval Speed 17m/min (57 ft.)/min 19m/min (63 ft./min) 18m/min (60 ft./min)Pay-Out Speed 22m/min (73 ft.)/min 22m/min (73 ft./min) (800H) free-fall or 19 m/min (63 ft./min)

power out or free-fall (800F)Current Draw (Typical) 12A 16A 25AMotor Type / Efficiency Permanent Magnet / 74% Permanent Magnet / 74% Permanent magnet / 82%Motor Wattage I/O 700W / 300W 700W / 300W 1100W / 450WGear Type Efficiency Worm Gear / 50%-88% Spur Gear / 92% - 98% Spur Gear / 92% - 98%Chain Size 6mm short-link 8(6)mm short-link, 8(6)mm DIN766 8(6)mm short-link,

6-7mm DIN766 5/16" (1/4") BBB, 5/16" (1/4") G4 HT 8(6)mm DIN7661/4" BBB, 1/4" G4 HT 5/16" BBB, 5/16" G4 HT

Rope Size 12mm, 1/2" Nylon 12-14mm (1/2"-9/16") Nylon 12-14mm (1/2"-9/16") Nylonthree strand, medium lay three strand, medium lay three strand, medium lay

Dimensions 230mm x 120mm x 135mm 304mm x 197mm x 153mm 304mm x 197mm x 153mm9" x 4.75" x 5.3" 12" x 7.75" x 6" 12" x 7.75" x 6"

Weight 4.6 kg (10 Ib.) 7.8 kg (117 Ib.) (800H) 9.2 kg (20.4 Ib)8.2 kg (18 Ib.) (800F)

FEATURES 710 SERIESFor vessels from 4.5-6m (15-20 ft.) or handle up to 6.8 kg (15 Ib.) of anchor• Gypsy takes both rope and chain• Efficient heavy duty DC motor produce less heat• Stainless steel drive shaft and parts• Compact one-piece housing ensures water resistance• Aluminum alloy case with powder coated finish• Simple deck mounting with no under deck parts• Easy to install by yourself

FEATURES 800 SERIESFor vessels from 6-9m (20-30 ft.) or handle up to 13.6 kg (30 Ib.) of anchor• Efficient spur gears, low current draw, high output power• Efficient heavy duty DC motor produce less heat• Stainless steel Gypsy takes both rope and chain• Switch control automatically free-fall or power out for free-fall model• Compact one-piece housing ensures water resistance.• Aluminum alloy case with powder coated finish• Stainless steel drive shaft and parts• Simple deck mounting with no under deck parts• Easy to install by yourself

ORDER NO. Mfr. No. Description760-08000 800H Power Out, Stainless Steel Gypsy760-08001 800F Free-Fall, Stainless Steel Gypsy

ORDER NO. Mfr. No. Description760-07100 710HS Power Out, Stainless Steel Gypsy

ORDER NO. Mfr. No. Description760-09000 900 Mighty Free-Fall, Stainless Steel Gypsy

FEATURES 900 MIGHTYFor vessels from 8.4-13.5m (28-45 ft.) or handle up to 20.4 kg (45 Ib.) of anchor• Efficient spur gears, low current draw, high output power• Efficient heavy duty DC motor produce less heat• Stainless steel Gypsy takes both rope and chain• Switch controls automatic free-fall• Selectable free-fall or power out mode• Compact one-piece housing ensures water resistance.• Aluminum alloy case with powder coated finish• Stainless steel drive shaft and parts• Simple deck mounting with no under deck parts• Easy to install by yourself

HORIZONTAL WINDLASS SERIES

For more information see: www.southpacific.com.au

VA600 SERIES - For vessels from 18-32 ft. (5.4-9.6 meters) or handle up to 13.6 kg. (30 Ib.) of anchorVA1000 Series - For vessels from 28-42 ft. (8.4-12.6 meters) or handle up to 18.2 kg. (40 Ib.) of anchor

The VA series windlass is made of marine grade aluminum alloy with powder coated finish to ensure corrosion resistance.The gearbox, heavy duty DC motor and base have been designed into one, with no separate parts for easy installation. Includes control unit,circuit breaker, handle bar, hardware and manual.• Stainless steel Gypsy takes both rope and chain• Capstan and Gypsy are able to be operated separately• Efficient spur gears, low current draw, high output power• Efficient heavy duty DC motor produces less heat• Manual retrieval handle bar included• Compact one-piece unit for easy installation• Simple deck mounting

SPECIFICATIONS VA600 VA1000Boat Size 18-28 ft. 28-45 ft.Operating Voltage 12V DC 12V DC or 24V DCMax. Work Load 275 kg (600 Ib.) 450 kg (1000 Ib.)Typical Working Load 45 kg (100 Ib.) 72 kg (160 Ib.)Retrieval Speed 20m (67 ft.)/min 18m (60 ft.)/minPay-Out Speed 22m (73 ft.)/min 20m (67 ft.)/minCurrent Draw (Typical) 16A 25A or 13AMotor Type Permanent MagnetMotor Wattage I/O 700w/300w 1100w/450wMotor Efficiency 75% 82%Gear Type Efficiency Spur Gear / 92% - 98%Chain Size 8(6) mm short-link

8(6) mm DIN7665/16" (1/4") BBB5/16" (1/4") G4 HT

Rope Size 12-14mm, (1/2" - 9/16")Three strand, medium lay

Weight w/o Capstan 5.2 kg (11.5 Ib.) 5.8 kg (12.8 Ib.)Weight with Capstan 6.2 kg (13.7 Ib.) 6.8 kg (15 Ib.)

Model No. VA600

ORDER NO. Mfr. No. A B C D E F Fastener:422-22350 222350-1 5-3/4" 2-5/8" 1-1/4" 1-3/4" 1" 4-3/4" #8FH

LIFT HANDLEDie Cast Zinc Chrome Plated

LIFT HANDLESand Cast Brass Chrome Plated

LIFT HANDLESand Cast Brass Chrome Plated

ORDER NO. Mfr. No. A B C D E F Fastener:422-22340 222340-1 4-3/4" 2-5/8" 13/16" 1-1/4" 5/8" 4-1/16" #10FH

ORDER NO. Mfr. No. A B C D E F Fastener:422-24260 (ea) 224260-1 5-7/8" 2-3/4" 1-3/8" 2" 1-1/8" 4-15/16" #10FH

ORDER NO. Mfr. No. Description760-06000 VA600 Windlass, Aluminum Base760-10000 VA1000 Windlass, Aluminum Base

VERTICAL WINDLASS SERIES

For more information see: www.sea-dog.com435

WINDLASSES/STERN HANDLES

Documents

CC Marine 2013-14 Catalogue_Mooring