CBS Catalogue

CBS Products Ltd. Pillings Road, Oakham, Rutland, LE15 6QF, United Kingdom Tel: +44 1572 723 665 • Fax: +44 1572 756 009

Email: [email protected]

Specialised equipment solutions for the construction of power transmission lines and telecommunications networks around the world

CBS Products

For Further Information Telephone No: +44(0) 1572 723665 • Fax No: +44 (0) 1572 756009

E-mail: [email protected] • Website: www.cbsproducts.com

Company Profile

Established in 1971, CBS Products Ltd is a leading provider of solutions and equipment to the installers of power transmission lines and telecom networks around the world. From our base in Oakham, in the East Midlands, the company started life as a manufacturer of cable jointing equipment and gradually diversified into winching equipment for the power transmission industry. With the deregulation of the electricity industry in the 80’s the newly privatised National Grid embarked on a diversification policy and entered the field of telecommunications, installing fibre cables along transmission line networks. This provided an opportunity for the company to develop a line of pullers and tensioners specifically for this work. Our expose to the UK Telecoms market meant that the company’s expertise and know-how rapidly came to the attention of the major players in the fibre optic cable world. As a corollary, CBS became the partner of choice in a number of high profile, international fibre optic cable projects, notably in Russia, Malaysia and Zimbabwe. These projects provided further opportunities for the company to show off its prowess in developing innovative solutions capable of withstanding extreme conditions, both of climate and terrain. Towards the end of the 90’s the company’s continuing quest for new horizons culminated in the development of the Tornado series of fibre optic blowing machines. These have proved highly successful both in the UK and Export markets. In the UK alone the Tornado beat off all competition in a very demanding trial, enabling CBS Products Ltd to win a highly prestigious contract to become exclusive suppliers of Cable Blowing Equipment to British Telecommunications (BT). So, whether you’re in Telecoms, CATV or Power Transmission line installation, CBS has what it takes to keep your project running smoothly and on schedule. Which brings us to one more compelling reason why you should consider us when planning your next cable deployment project. Following our company policy of continual product development CBS Products Ltd reserve the right to amend the specifications of our products without prior notice.

MAIN CATALOGUE INDEX

Section 1 Winches – Overhead and Underground Section 2 Drum Trailers & Drum Stands Section 3 Cable Blowing Machines – Breeze & Tornado

Section 4 Duct Rods & Accessories Section 5 Overhead Line Stringing Equipment Section 6 Tooling & Auxiliary Equipment Section 7 Compression Equipment Section 8 Underground Equipment Section 9 Miscellaneous Information



For Further Information Telephone No: +44(0) 1572 723665 • Fax No: +44 (0) 1572 756009 E-mail: [email protected] • Website: www.cbsproducts.com

SECTION 1

WINCHES – Overhead and Underground

OVERHEAD

Bulldog Overhead Line Winch

Hydraulic Universal Winch

Fibre Optic Cable Puller

Portable Hydraulic Winching System

Overhead Line Construction Winch

Puller

Tensioner

Tower Erection Winch

Tractor Winch

Sagging Tractor

Single Capstan Winch - Hydraulic

Single Capstan Winch - Electrical UNDERGROUND

Lightweight Capstan Winch

Pull & Assist Winch

Hydraulic Hauling Winch

Cable Pusher


C-680 Bulldog Overhead Line Winch The CBS 680 Bulldog winch has been designed to provide a compact, transportable unit for overhead line stringing work. The self-contained winch is powered by an 11hp petrol engine and the precise control required is provided by the hydraulic circuit. There are drums for various applications and these are easily interchanged. Designed to tow behind even small vehicles, the Bulldog winch is lightweight and can be easily positioned by one man. Operational stability is provided by ground anchors on the towbar, or by employing the towing vehicle as an anchor. The C-680 Bulldog is a British Universal Winch designed to meet the needs of overhead line engineers. The various options permit use on aerial bundle (ABC), Copper, Aluminium and ACSR Conductors. SPECIFICATION Output Torque: 615Nm Engine: 11hp Petrol Length: 2150mm Width: 1150mm Height: 800mm Weight: 250kg

ORDERING DETAILS Product No Description C-680 Bulldog Overhead Line Winch C-680-01 Layering Device for Winch C-A1-680-27 Split Drum for retrieving Conductor C-821-02 Drum 700mm dia fitted with 8mm

dia Paraline Rope 400 metres C-680-04 Drum fitted with 6mm diameter

steel wire rope x 120 metres for sagging, pulling and lifting applications

C-680-08 Trailer Lighting Board C-680-07 Drum Drive Arrangement


C-821 Hydraulic Universal Winch The CBS 821 Universal Winch offers the constant pulling tension of a double capstan drive and the flexibility of a direct drive drum in one machine. The winch employs a powerful petrol engine mounted with associated hydraulics on a sturdy trailer unit. The precise hydraulic controls allow easy operation through one fail-safe lever. Ideally suited for ABC erection, 11/33kV stringing work, conductor recovery and underground cable handling. SPECIFICATION Speed: 0-30 metres/min from

capstans 0-100 metres/min drum drive

when connected to capstan drive shaft

Drive Fixed displacement pump Arrangement: and motor through double

capstan drive module Controls: Fail-safe, bi-directional

selection, creep & inching facility and operator adjustable load limiting control

Rope Layer: Semi-automatic Load Indicator: Calibrated gauge dial read out

in kg with adjustable limit control

Hydraulic Circuit: Open circuit with double

filtration overload protection Length: 2750mm Width: 1370mm Height: 1015mm Weight: 575kg (unladen)

ORDERING DETAILS Product No Description Capacity C-821 Hydraulic Winch 800kg C-821-01 Hydraulic Winch 1000kg

OPTIONAL EXTRAS Product No Description C-821-02 Drum 700mm diameter fitted

with 400 metres of 8mm diameter Paraline rope

C-821-03 Drum 700mm diameter fitted

with 600 metres of 8mm diameter Paraline rope

C-A1-680-27 Split Drum C-821-07 Trailer Lighting Board C-821-14 Waterproof Cover

For Further Information Telephone No: +44(0) 1572 723665 • Fa x No: +44 (0) 1572 756009 E-mail: [email protected] • Website: www.cbsproducts.com

C-1070-001 Fibre Optic Cable Puller The C-1070 is a mobile puller designed specifically for installing “ADSS” fibre optical cables on transmission towers. The C-1070 is a double grooved capstan design, suitable for use with the CBS Paraline coated synthetic ropes, enabling installation of cable with one circuit live. SPECIFICATION Pulling Tension (Max): 1000kg Pulling Speed (Max): 40m/min Control System: Full Hydraulic Circuit Tension Monitoring: Dial Read Out Tension Control Limit: Adjustable 100-1000kg Engine: 18hp Petrol Engine Hydraulic Circuit: Oil tank, double filter

and oil cooler Chassis: Steel Construction Rope Take-up Drum: Max Drum 700m semi

auto layering device Trailer Unit: Braked axles c/w

wheels and tyres, high ground clearances and jockey wheel. The unit is designed for site use only.

Length: 2300mm Height: 1320mm Width: 1430mm Weight: 550kg

ORDERING DETAILS Product No Description C-1070 Fibre Optic Cable Puller –

1000kg, 18hp Petrol Engine OPTIONAL EXTRAS Product No Description C-821-26 Drum 700m dia without rope C-1508-0500-21-F Rope 8mm x 500 metres P U

Coated C-1508-0600-21-F Rope 8mm x 600 metres P U

Coated


C-825 Portable Hydraulic Winching System The CBS 825 is designed to provide a fully portable winching system, by breaking down into easily transportable modules. Ideally suited for overhead line stringing work such as ABC conductors, bare conductors or re-conductoring projects, it provides a flexible system suitable where access is restricted and ground disturbance is undesirable. The winch can be pole mounted or ground mounted using the optional frame. The C-825 Hydraulic Winch comprises of a strong lightweight pole mounting frame with securing chains and incorporates a hydraulic drive and control lever. SPECIFICATION Capacity: 1000kg Maximum Tension

(approx) Average Tension 300kg Speed Control: 0-100 metres/min

Fail-safe, bi-directional section, creep and inching facility

C-826 Hydraulic Power Pack The C-826 Hydraulic Power Pack has an 8hp petrol engine, mounted in a tubular frame with wheels and handles. This unit is suitable for operating other equipment and tools requiring the same hydraulic output. Fitted with “Power On Demand” device, the motor delivers only when required, idling when not winching. Length: 960mm Width: 700mm Height: 630mm Weight: 90kg

Drum and rope not included as standard, see optional extras. ORDERING DETAILS Product No Description C-825 Pole Mounted Hydraulic Winch C-825-10 Layering Device (Manual) C-826-08-01 Hyd Power Pack 8hp Std Flow

3000psi 15 litres/min C-826-02-F Hose with couplings – 5 metres long

(2 off) OPTIONAL EXTRAS Product No Description C-821-02 Drum 700mm, fitted with 400

metres of 8mm diameter “Paraline” Rope.

C-821-03 Drum 700mm, fitted with 600

metres of 8mm diameter “Paraline” Rope.

C-A1-680-27 Split drum for retrieving old

conductor C-825-06 Grounding frame and anchor rods C-825-07 Split drum (outboard type) C-825-09 Carrying handle for Hyd Motor


C-780 Overhead Line Construction Winch 2 Tonne Capacity Designed to give reliable, flexible winching system to meet all 11/33kV work, together with some 66kV and 132kV maintenance requirements, the system employs a range of drums to suit particular applications. The powerful winch is mounted on a robust steel chassis with a single axle trailer facility for site manoeuvrability. The engine fitted with electric start, powers the drive spindle of the drum via a gearbox and hydraulic circuit, which is designed to achieve smooth, variable control of the winding operation in either direction. The powered hydraulic drum lifting device, together with hydraulic stabilising jacks provides safe drum handling. SPECIFICATION Capacity: 2 tonne at 250mm dia Engine: Diesel or Petrol Rope Speed: 0-100 metres/min (adjustable) Rope Drums: See options Drum Dia: 1100mm Maximum Drum Width: 1075mm Maximum (If using a solid wooden drum) Length: 3100mm Width: 2300mm Height: 1400mm (without drums) Weight: 1100kg (net)

ORDERING DETAILS Product No Description C-780-20 Overhead Line Construction

Winch 2 Ton Petrol Engine C-780-20-01 Overhead Line Construction

Winch 2 Ton Diesel Engine

OPTIONAL EXTRAS Product No Description C-780-11 Layering Device, Hydraulic

Control C-780-05 Triple Drum 8mm Dia x 1500

metres Paraline Rope – 3 off required

C-1002-10-F Weatherproof Cover CONDUCTOR REFURBISHING Product No Description C-780-07 Triple split steel drum for old

conductors. Drums are split to ease removal of old conductors – 3 off required


C-780 Overhead Line Construction Winch 3 Tonne Capacity Designed to give reliable, flexible winching system to meet all 11/33kV work, together with some 66kV and 132kV maintenance requirements, the system employs a range of drums to suit particular applications. The powerful winch is mounted on a robust steel chassis with a single axle trailer facility for site manoeuvrability. The engine fitted with electric start, powers the drive spindle of the drum via a gearbox and hydraulic circuit, which is designed to achieve smooth, variable control of the winding operation in either direction. The powered hydraulic drum lifting device, together with hydraulic stabilising jacks provides safe drum handling. SPECIFICATION Capacity: 3 tonne at 250mm dia Engine: Diesel or Petrol Rope Speed: 0-100 metres/min adjustable) Rope Drums: See options Drum Dia: 1100mm Maximum Drum Width: 1075mm Maximum (If using a solid wooden drum) Length: 3100mm Width: 2300mm Height: 1400mm (without drums) Weight: 1100kg (net)



Winch 3 Ton Diesel Engine OPTIONAL EXTRAS Product No Description C-780-11 Layering Device, Hydraulic

Control C-780-05 Triple Drum 8mm Dia x 1500

metres Paraline Rope – 3 off required

C-1002-10-F Weatherproof Cover CONDUCTOR REFURBISHING Product No Description C-780-07 Triple split steel drum for old

conductors. Drums are split to ease removal of old conductors – 3 off required


C-780 Overhead Line Construction Winch 4 Tonne Capacity Designed to give reliable, flexible winching system to meet all 11/33kV work, together with some 66kV and 132kV maintenance requirements, the system employs a range of drums to suit particular applications. The powerful winch is mounted on a robust steel chassis with a single axle trailer facility for site manoeuvrability. The engine fitted with electric start, powers the drive spindle of the drum via a gearbox and hydraulic circuit, which is designed to achieve smooth, variable control of the winding operation in either direction. The powered hydraulic drum lifting device, together with hydraulic stabilising jacks provides safe drum handling. SPECIFICATION Capacity: 4 tonne at 250mm dia Engine: Diesel or Petrol Rope Speed: 0-100 metres/min

adjustable) Rope Drums: See options Drum Dia: 1100mm Maximum Drum Width: 1075mm Maximum (If using a solid wooden

drum) Length: 3100mm Width: 2300mm Height: 1400mm (without drums) Weight: 1100kg (net)



Winch 4 Ton Diesel Engine OPTIONAL EXTRAS Product No Description C-780-11 Layering Device, Hydraulic

Control C-780-05 Triple Drums 8mm Dia x

1500 metres Paraline Rope - 3 off required.

C-1002-10-F Weatherproof Cover CONDUCTOR REFURBISHING Product No Description C-780-07 Triple split steel drums for

old conductors. Drums are split to ease removal of old conductors - 3 off required.


C-1020 Puller The CBS 1020 Puller is designed to provide the facilities necessary for safe Overhead Line Stringing. Ease of operation is provided with a flexible hydraulic drive system, which enables rapid pulling rates, or higher pulling forces, within a single control. The system is fail-safe and incorporates an automatic spring applied hydraulic brake. The unit is fitted with a self-loading hydraulic drive reel winder for conductor or rope take up. The reel winder is elevated vertically for transportation. SPECIFICATION The air-cooled diesel engine powers the twin hydraulic circuits, the main drive is provided through a variable displacement pump driving a fixed displacement motor, providing variable step less speed control.

ORDERING DETAILS Product No Description C-1020 Puller 1.6 Ton OPTIONAL EXTRAS Product No Description C-1020-02 Take Up Reel C-1020-03-F Weatherproof Cover C-1508-4000-21-F Paraline Rope 8mm x 4000

metres P U Coated

Pulling Capacity: 2000kg at 2.5km/h Grooved Capstan Wheels: 250mm dia x 7 grooves Maximum Rope Cap: 8mm dia Paraline Rope x

4000 metres Load Indicator: Calibrated Dynamometer Trailer Chassis: Full EC Regulation to

60mph. Auto-reverse facility fitted as standard

Length: 3500mm Width: 1820mm Height: 2100mm Weight: 1600kg


C-1004 Tensioner The CBS 1004 Tensioner is designed to provide smooth control of fibre optic cable tension during the stringing operations. Cable is tensioned directly from the drum, and controlled braking is provided via a gearbox to the hydraulic variable tension controls. A diesel engine drives the cooling system and provides the useful pull back facility. A disc brake provides the secondary holding facility. The unit is trailer mounted and has a powered hydraulic drum lifting facility (auxiliary winches can be fitted if required). The drum drive is taken via the gearbox through a chain drive to the high quality hydraulic pump. The flow is controlled by a fully balanced flow compensated control valve, to provide smooth surge-free control of tension. SPECIFICATION

ORDERING DETAILS Product No Description C-1004 Tensioner 1.5t OPTIONAL EXTRAS Product No Description C-1004-01-F Weatherproof Cover C-1004-02 Auxiliary Capstan Winch Tension Capacity: 500kg on 1500mm dia

drum at 5km/hr Engine: Single cylinder Lister

Diesel, electric start air-cooled

Trailer Chassis: Full EC regulation, auto-

reverse facility fitted as standard

Max Drum Dia: 1900mm Max Drum Width: 1050mm Max Drum Weight: 1500kg Length: 4100mm Width: 2500mm Height: 1700mm Weight: 1300kg


W1-TEW-25H Tower Erection Winch This Hydraulically driven self-powered drum winch, popular with power line and telecommunications contractors, features full man-riding specification with dual braking system and dead-man type controls. It has a heavy duty, welded steel constructed chassis with integral anchoring legs that provide a secure base during winching operations. SPECIFICATION Maximum Load: 2500kg

5000kg is available on request Speed Bare Drum: 14m/min Speed Full Drum: 32m/min Rope Capacity: 500m x 13mm dia steel 450m x 14mm dia steel 340m x 16mm dia steel Engine: Air-cooled diesel. Max 18hp at 3000rpm Controls: Single dead-man control for raise/lower. Separate lever for fine speed adjustment. Transmission: Variable output pump, positive displacement motor, chain drive to sliding pinion for free drum facility, final drive via ring gear on rope drum. Safety: Primary brakes, spring applied, pressure released. Secondary brakes – disc brake type. Fold down spade anchor. Front and Rear props. Shackle points on frame. Length: 2300mm Width: 1200mm Height: 1220mm Weight: 870kg without Rope

ORDERING DETAILS Product No Description W1-TEW-25H-01 Tower Erection Winch 2.5 ton (Rope not included) OPTIONAL EXTRAS Product No Description W1-TEW-25H-45-F Weatherproof Canvas Cover

This winch is supplied in CBS Yellow as standard


W1-TEW25H-0099 Tower Erection Winch (Extra Rope Capacity) This winch has been designed to comply with all relevant safety requirements for lifting loads. Two fully automatic, fail – safe-braking systems are incorporated into the unit. The first is si tuated directly in the transmission line and functions every time the winch controls are operated. The second is mounted in direct contact with the rope drum and is controlled by sensing system acting on the main drive chain and the hydraulic oil pressure. In the unlikely event that the chain should fail, or all hydraulic pressure is lost, then this second brake would automatically apply and hold the load. This brake can also be applied manually. All components used in the manufacture of this winch are designed to offer 5:1 safety factor based on the safe working load of this winch. SPECIFICATION Winching Capacities: The winching capacity is dependent upon the quantity of rope left on the rope drum. As a guide the following will apply: - Rope Drum Full 1000kg Rope Drum Half Full 2000kg Rope Drum Empty 3000kg The actual safe working loads will depend upon the manner of which the winch is working and upon the strength of the wire rope. As a guide, the above winch capacities assume a factor safety of 3:1, for lifting use a safety factor of at least 5:1 and for man riding applications, use a safety factor of at least 10:1. Rope Capacity: 750 metres of 13mm diameter 500 metres of 16mm diameter 300 metres of 20mm diameter

Rope Speeds: Once again, the rope speed is dependent upon the amount of rope on the rope drum. The speed is infinitely variable throughout the full range using the simple FAST-SLOW control pump. Rope Drum Full 35 metres/min Rope Drum half full 25 metres/min Rope Drum empty 15 metres/min Dimensions and Weight Length 2700mm Width 1670mm Height 2100mm Weight 1122kg (Less Rope) (Average Rope weight 500 kg) ODERING DETAILS Product No Description W1-TEW25H-0099 Tower Erection Winch NOTE Axle and wheels are suitable for site work only and not for using on a public highway. C/W Parking Brake.


W1-TEW-50H Tower Erection Winch This Hydraulically driven self-powered drum winch, Popular with powerline and telecommunication contractors, features full man-riding specification with dual safety braking system and dead man controls. It has a heavy duty welded steel construction chassis with integral drop down anchor and adjustable prop legs that provide a secure base during winching operations. SPECIFICATION Maximum Load: 5000kg Speed Bare Drum: 8M/Min Speed Full Drum: 18M/Min Rope Capacity: 500m x 14mm Dia Steel 340m x 16mm Dia Steel 220m x 19mm Dia Steel Engine: Lister Diesel Controls: Single lever control of all raise/lower operations with return to centre dead man facility separate lever for fine speed control of rope. Braking: Two fully automatic brakes are fitted as standard. Primary brakes are on the hydraulic motor drive. Secondary braking is mounted directly to the winch rope drum gear ring drive. Both brakes operate in the event of engine or hydraulic failure. Axle: Site build, c/w parking brake. Towing Eye: 50mm Dia ring hitch. Other sizes are available on request. Length 2700mm Width 1500mm Height 1200mm Weight 1200kg

ORDERING DETAILS Product No Description W1-TEW-50H Tower Erection Winch


W1-RMW50 Tractor Winch A tractor mounted 5 tonne hydraulic winch with variable speed control for both forward and reverse winching. Based on a Landini (Legend) DT105 tractor offering full power steering and four-wheel drive. Fitted with ROPS & FOPS frame. The winch is rear mounted for stability and is complete with hydraulically raised and lowered ground anchor. Winch controls are mounted at the drive position. Power is supplied to the winch motor from a front mounted load-sensing pump. Fail safe braking is mounted directly in the drive system and operates automatically when the winch control lever is released or in the event of hydraulic or engine failure. Secondary manual braking is available acting directly on the winch to control overspin when paying out rope. Free rope drum facility is available through a manually operated clutch. SPECIFICATION Rope Capacity: 270m x 16mm dia 350m x 14mm dia Rope Speed: 55 mtr/min at max

drum diameter Winch Control: A single joystick lever

fitted in the cab for all UP/DOWN functions

Height: 2950mm Length: 5950mm Width: 2300mm Weight: 6060kg

ORDERING DETAILS Product No Description W1-RMW-50 Tractor Winch


W1-FMTW-10J Sagging Tractor A tractor mounted 10 tonne hydraulic winch with variable speeds for both forward and reverse, Automatic load holding, plus rear mounted 4.5 tonne jib complete with load indicator. Based on a Landini (Legend) DT105 Tractor offering full power steering and four wheel drive. Fitted with ROPS and FOPS frame. Rear wheels are replaced with heavy duty rims and solid steel centres.

Front Mounted Winch The winch is hydraulically driven, with variable speeds and is fully reversible. Failsafe automatic braking is applied to the main hydraulic motor with manual secondary braking operating on the secondary drive shaft to control overrun when pulling rope from the rope drum. The full 10,000kg pulling capacity is available only from the rear utilising the hydraulic ground anchor. A four roller fair lead is fitted to the front of the winch to permit light front pulls. The rear-mounted jib is used for hoisting and transporting conductor drums. The load-sensing device indicating weight lifted and is linked to an overload alarm. SPECIFICATION Rope Capacity: 350m x 20mm 500m x 16mm Rope Speed: 56 m/min (on full drum) Winch Control: A single joystick lever fitted

in the cab for all up/down functions.

Height: 4000mm (with jib raised ready

for use) Length: 6880mm (with jib raised ready

for use) Height: 2900mm (with jib lowered for

transport) Length: 8550mm (with jib lowered for

transport) Weight: Front Axle 3950kg Rear Axle 4490kg

ORDERING DETAILS Product No Description W1-FMTW-10J Front Mounted Tractor Winch


C-1054 Single Capstan Winch The C-1054 Capstan Winch has been designed to hoist loads up pole or transmission towers. Fitted with a rope-locking device as standard, thus eliminating the necessity to tie off the rope. The C-1054 comes complete with foot control and easily connects to a Portable Power Pack via quick release couplings. SPECIFICATION Capacity: 450kg Rope Speed: 30m/min Capstan Diameter: 140mm Width: 460mm Height: 380mm Depth: 340mm Weight: 50kg C-1200 Hydraulic Power Pack A lightweight trolley mounted hydraulic power pack, with pre-set internal system protection relief valve and quick release connections.

ORDERING DETAILS Product No Description C-1054-001 Hydraulic Winch Single

Capstan – Pole Mounted C-1054-002 Hydraulic Winch Single

Capstan – Tower Mounted ORDERING DETAILS Product No Description

C-1200-05-25 Hydraulic Power Pack

C-826-02-F Hydraulic Hoses 5m

(Two Required)


C-1210 Single Capstan Winch The C-1210 Single Capstan Winch has been designed to provide a light and powerful universal winch. Suitable for hoisting loads up poles or transmission towers or pulling cables and conductors. The optional rope locking device eliminates the need to tie off the rope. A remote foot control switch operates the 115 volt electrically powered winch. SPECIFICATION Capacity: 450kg Rope Speed: 12m/min Capstan Diameter: 140mm Remote Foot Control: Standard Width: 165mm Length: 510mm Weight: 16kg Power Supply: 115 Volts AC ORDERING DETAILS Product No Description C-1210-1-F Single Capstan Electric Winch ACCESSORIES Product No Description C-1210-01-F Steel Storage Box C-1210-02-F Rope Lock Device C-1210-03-F Universal Bracket C-1210-04-F Foot Switch (Included) C-1210-05-F Generator Set 2.5kvA.

115 Volts AC


C-1035 Lightweight Capstan Winch The C-1035 Lightweight Capstan Winch is designed for use over manholes. Powered by a Honda Engine through a right angle gearbox, the C-1035-05 has a 5.5HP Engine. The C-1035-10 has an 8HP Honda Engine. The units have a pulling capacity of 500kg and 1000kg respectively. SPECIFICATION

Capacity: 500kg 1000kg Engine: 5.5HP 8HP Length: 1100mm 1250mm Width: 500mm 500mm Height: 600mm 600mm Weight: 64kg 99kg

ORDERING DETAILS Product No Description C-1035-05-0001 Lightweight Capstan Winch –

500kg C-1035-10 Lightweight Capstan Winch –

1000kg


C-1045 Pull and Assist Winch The C-1045 winch has been designed to meet the requirements of installing telecommunication cables, employing a 760mm diameter single capstan to impact a controlled force to the pulling rope or cable. The single capstan allows the winch to be placed at the mid point of a section to assist in the pull, thus enabling longer pulls to be achieved. The C-1045 has a rope take up drum, which is driven independently via a hydraulic motor. The take up drum has a detachable side, which allows the rope on the drum to be removed in a tidy coil and can be declutched from the drive to allow the rope to be pulled out manually when threading. The winch is powered by a 13hp petrol engine that drives a fixed displacement hydraulic pump, which in turn drives the low speed, high torque, hydraulic motor. The motor drives the capstan through an epicyclical gearbox. The pulling tension is mounted on a dial read out, allowing the operator to monitor the pull. Tension is adjustable from 0 – 500kg. The winch will stop pulling at the selected tension without stopping the engine, thereby protecting the cable. The C-1045 is built on a robust steel chassis. The trailer equipment complies with European Standards and has a single axle, overrun brakes and jockey wheel. SPECIFICATION Engine: 13hp Capacity: 500kg Rope Speed (Max): 50m/min Capstan Diameter: 760mm Adjustable Tension: 0-500kg Length (Min): 3200mm Length (Max): 3436mm Width: 1670mm Height: 1294mm Weight: 580kg

ORDERING DETAILS Product No Description C-1045-001 Pull & Assist Winch


C-990 Hydraulic Winch 1 & 2 Tonne Capacity Designed to provide the very best in underground hauling of power cables, the winch is constructed on a heavy -duty steel chassis and can be supplied with a petrol or diesel engine. The hydraulic circuit provides precise winching control. The winch incorporates, as standard a dial read out of pulling tension (which is adjustable upto maximum capacity of the winch), overrun brakes and waterproof cover with removable steel frame. SPECIFICATION

C-990-10 Capacity: 1000kg Engine: 11hp Low Speed/High Tension: 20m/min High Speed/Low Tension: 36m/min Rope Diameter: 7mm Rope Length: 900m Tyres: 165 R13 Length: 3085mm Width: 1690mm Height: 1630mm Weight: 1125kg C-990-20 Capacity: 2000kg Engine: 13hp Low Speed/High Tension: 23m/min High Speed/Low Tension: 53m/min Rope Diameter: 9mm Max Rope Length: 600m Tyres: 165 R13 Length: 3085mm Width: 1690mm Height (with cover): 1630mm Weight: 1175kg

ORDERING DETAILS Product No Description C-990-10 Hydraulic Winch 1T Petrol

Engine C-990-20-01 Hydraulic Winch 2T Petrol

Engine C-990-20-04 Hydraulic Winch 2T Diesel

Engine OPTIONAL EXTRAS Product No Description C-990-01 Electronic Load & Length

Measuring System with hardcopy print out


C-990 Hydraulic Winch 3,4 & 5 Tonne Capacity Designed to provide the very best in underground hauling of power cables, the winch is constructed on a heavy duty steel chassis and can be supplied with a petrol or diesel engine. The hydraulic circuit provides precise winching control. The winch incorporates, as standard, a dial read out of pulling tension (which is adjustable upto maximum capacity of the winch), overrun brakes and waterproof cover with removable steel frame. SPECIFICATION C-990-30 Capacity: 3000kg Engine: 18hp Low Speed/High Tension: 15m/min High Speed/Low Tension: 42m/min Rope Diameter: 12mm Max Rope Length: 600m Tyres: 185 R14 Length: 3100mm Width: 1800mm Height (with cover): 1700mm Weight: 1650kg C-990-40 Capacity: 4000kg Engine: 18hp Low Speed/High Tension: 13m/min High Speed/Low Tension: 26m/min Rope Diameter: 14mm Max Rope Length: 600m Tyres: 215/75 R16C Length: 3600mm Width: 1800mm Height (with cover): 1770mm Weight: 2600kg C-990-50 Capacity: 5000kg Engine: 24hp Low Speed/High Tension: 13m/min High Speed/Low Tension: 26m/min Rope Diameter: 14mm Max Rope Length: 600m Tyres: 215/75 R16C Length: 3600mm Width: 1800mm Height (with cover): 1770mm Weight: 2600kg

ORDERING DETAILS Product No Description C-990-30-01 Hydraulic Winch 3T Petrol




Engine OPTIONAL EXTRAS Product No Description C-990-01 Electronic Load & Length

Measuring System with hardcopy print out


C-1350 Cable Pusher The C-1350 Cable Pusher has been designed to assist the laying of electrical cables or cylindrical elements. The unit has a profiled drive system to grip the cable, with a load applicator of adjustable upper rollers. The drive system is hydraulic, and is powered by a C-1200 Portable Hydraulic Power Pack. SPECIFICATION Cable Size: 30-150mm o/d Dimensions: 1390mm Long x 500mm

Wide x 770mm High Max Push: 700kg Max Speed: 10m/min Controls: Single Lever for Push/Pull

Operations c/w variable speed control

Drive System: Hydraulic Recommended Requirement: 18 ltr/min at 60 bar Weight: 95kg C-1200 Hydraulic Power Pack A lightweight trolley mounted hydraulic power pack, with pre-set internal system protection relief valve and quick release connections. ORDERING DETAILS Product No. Description C-1200-0550-01 Hydraulic Power Pack

ORDERING DETAILS

Product No Description

C-1350 Cable Pusher C-1350-01 Control Valve Module c/w Hydraulic Hoses


SECTION 2

Drum Trailers & Drum Stands DRUM TRAILERS

Drum Trailer – 1000kg Drum Trailer – 1000kg Drum Trailer – 1200kg Drum Trailer – 1630kg

Drum Trailer – 1000kg Drum Trailer – 2200kg Drum Trailer – 2750kg Drum Trailer – 4000kg Drum Trailer – 5200kg Triple Braked Drum Trailer DRUM STANDS Roll on Drum Stands Cable Drum Spindles & Cable Drum Jacks, Cable Drum Jack Steady Base Swedish Drum Stand & Drum Cradle Braked Drum Stand 2 & 4 Ton Braked Drum Stand Drum Transporting Trolley & Hydraulic Drum Jacks Conductor Drum Stand


C-751-10 Drum Trailer The Drum Trailer comes in two versions, and provides a compact and secure method of drum transportation. Manufactured in strong steel sections, it incorporates manually operated hydraulic lifting of drums. There is, as an option, the facility to provide drum braking, this is particularly useful when pulling the conductor during conductor stringing operations. Trailer braking is of the overrun type and is supplied to EC Specification with auto -reverse as standard. Lights are also fitted as standard. SPECIFICATION Drum Weight Max: 1000kg Drum Width Max: 1050mm Drum Diameter Max: 1800mm Drum Diameter Min: 1000mm Tyres: 185 R13 Towing Eye: Standard 50mm

diameter eye Height (without Drum): 1350mm Width: 1950mm Length: 2700mm Weight: 350kg Spindle Diameter: 63mm Lighting: Stop, tail, direction,

indicators c/w connectors

Suspension: Swinging arm with

aeon suspension Braking: Drum Brakes to EC

Specification with hand brake

Lifting Arrangement: Hand operated

hydraulic pump with individual valves for each ram

ORDERING DETAILS Product No Description C-751-10 Drum Trailer – 1000kg OPTIONAL EXTRAS Product No Description C-751-03 Drum Braking Arrangement


C-751-12 Drum Trailer The Drum Trailer provides a compact and secure method of drum transportation. Manufactured in strong steel sections, it incorporates manually operated hydraulic lifting of drums. There is, as an option the facility to provide drum braking, this is particularly useful when pulling the conductor during conductor stringing operations. Trailer braking is of the overrun type and is supplied to EC Specification with auto -reverse as standard. Lights are also fitted as standard. SPECIFICATION Drum Weight Max: 1200kg Drum Width Max: 1200mm Drum Diameter Max: 2100mm Drum Diameter Min: 800mm Tyres: 185 R13 Towing Eye: Standard 50mm

diameter ball Height (without Drum): 1585mm Width: 2070mm Length: 3265mm Weight: 400kg Spindle Diameter: 63mm Lighting: Stop, tail, direction,

indicators c/w connectors, for light


rubber suspension Rear Props: Manual slide and lock

type Adjustable Jockey Wheel: Solid tyred Wheel Braking: Drum brakes to EC

Specification 250 x 40 override type, auto reverse, with hand brake.


hydraulic pump with individual valves for each ram and locking facility

ORDERING DETAILS Product No Description C-751-12 Drum Trailer – 1200kg OPTIONAL EXTRA Product No Description C-751-12-03 Drum Braking Arrangement


C-751-16 Drum Trailer The Drum Trailer provides a compact and secure method of drum transportation. Manufactured in strong steel sections, it incorporates manually operated hydraulic lifting of drums. There is, as an option the facility to provide drum braking, this is particularly useful when pulling the conductor during conductor stringing operations. Trailer braking is of the overrun type and is supplied to EC Specification with auto -reverse as standard. Lights are also fitted as standard. SPECIFICATION Drum Weight Max: 1630kg Drum Width Max: 1200mm Drum Diameter Max: 2185mm Drum Diameter Min: 900mm Tyres: 205/75 R17.5 Towing Eye: Standard 40mm

diameter eye Towing Height: 500mm (nominal) Height (without Drum): 1665mm Width: 2220mm Length: 3302mm Weight: 560kg Spindle Diameter: 63.5mm Lighting: Stop, tail, direction,

indicators c/w connectors, for light


rubber suspension Rear Props: Manual slide and lock

type Adjustable Jockey Wheel: Solid tyred Wheel Braking: Drum brakes to EC

Specification 300 x 60 override type, auto reverse, with hand brake.


hydraulic pump with individual valves for each ram and locking facility

ORDERING DETAILS Product No Description C-751-16 Drum Trailer – 1630kg


C-752 Drum Trailer The C-752 Drum Trailer has been designed to provide safe handling of cable or conductor drums. Manufactured in strong steel sections, it incorporates manually operated hydraulic lifting of drums. There is an optional drum braking facility, which can be used to control the conductor when undertaking conductor-stringing operations. Trailer braking is of the overrun type and is supplied to EC Specification with auto reverse as standard. Lights are also fitted as standard. SPECIFICATION Max Drum Weight: 2200kg Max Drum Width: 1160mm with brake

1360mm without brake Min Drum Diameter: 900mm Max Drum Diameter: 2200mm Towing Eye: Standard 50mm dia

eye Height (without drum): 1660mm Width: 2300mm Length: 3300mm Weight: 800kg Spindle: 60mm Suspension: Swinging arm with

aeon suspension Braking: Drum brakes to EC

Specification with hand brake

Lifting Arrangement: Hydraulic pump with

individual valves for each ram

Tyres: 8.25 R16

ORDERING DETAILS Product No Description C-752 Drum Trailer – 2.2 Ton OPTIONAL EXTRAS Product No Description C-752-02 Hydraulic Drum Braking

Arrangement C-752-03 Double Calliper Brake


C-700 Cable Drum Trailer The CBS C-700 comes equipped with braking and road lighting systems to conform with EU Directives and is designed to travel fully laden at road speeds indicated on the UK Highways and most other European Countries. For safe and easy drum handling, all CBS Cable Drum Trailers are fitted with Hydraulic hand pump operated lift/lower systems as standard. When the drum is fully raised mechanical locks ensure drum security in transit. SPECIFICATION Gross Vehicle Weight: 3500kg Payload Approx: 2750kg Drum Dia Min: 1060mm Drum Dia Max: 2500mm Max Drum Width: 1280mm Spindle Dia: 76mm Trailer Width: 2300mm Brake System: Overrun Auto Reverse Tyres: 215/75R 17.5 Towing Speed Max: 100km/h

ORDERING DETAILS Product No Description C-700 Drum Trailer – 2.75 ton OPTIONAL EXTRAS Drum Braking Arrangement (Please Consult)


C-560 4 Ton Drum Trailer A rigidly built general purpose cable drum trailer, which provides a safe, secure method of transporting cable drums. Manufactured in strong steel section, it incorporates hydraulically powered drum lifting through a hand pump and rams, the rams being operated together or individually. The drum is mechanically locked in the top position during transportation. Various spindle pockets are provided to accommodate a range of drum diameters. SPECIFICATION Max Drum Weight: 4000kg Max Drum Width: 1500mm Min Drum Diameter: 1600mm Max Drum Diameter: 3000mm Towing Eye: 50mm Height (without drum): 2050mm Width: 2500mm Length: 3950mm Weight: 1500kg Spindle Diameter: 75mm Lighting: Stop, tail, direction, indicators c/w connectors Suspension: Swinging arm with aeon suspension Braking: 2 line air braking system with hand brake to EC specification. Lifting Arrangement: Hydraulically hand pump with individual values for each ram Drum Drive Arrangement The trailer is fitted with a 5hp petrol engine and hydraulics to drive friction rollers. The rollers locate on the flanges of the drum and are utilised during cable payout. The unit can be operated in either direction.

ORDERING DETAILS Product No Description C-560 4 Ton Drum Trailer OPTIONAL EXTRAS Product No Description C-560-03 Drum Drive Arrangement C-560-TOW-76N 76mm NATO Eye

Picture shown is with Cable Drum Drive arrangement. (Option C-560-03)

Al Konschak

discontinued cbs


C-130 Cable Drum Trailer The C-130 comes equipped with braking and road lighting systems to conform with EU Directives and is designed to travel fully laden at road speeds indicated on the UK Highways and most other European Countries. For safe and easy drum handling, all CBS Cable Drum Trailers are fitted with Hydraulic hand pump operated lift/lower systems as standard. When the drum is fully raised mechanical locks ensure drum security in transit. SPECIFICATION Gross Vehicle Weight: 6580kg Payload Approx: 5200kg Drum Dia Min: 1360mm Drum Dia Max: 2860mm Max Drum Width: 1470mm Towing Eye: 76mm NATO Spindle Dia: 76mm Trailer Width: 2550mm Brake System: 2 Line Air

Mechanical Tyres: 11 x 22.5 Towing Speed Max: 100km/h

ORDERING DETAILS Product No Description C-130-F Drum Trailer – 5.2 Ton OPTIONAL EXTRAS Product No Description C-130-01-F Drum Drive Unit


C-1290 Triple Braked Drum Stand A uniquely versatile tool. A single operator can independently control the tension of all three conductors. Ideally suited to the needs of cost conscious installation crews who require fast turnarounds and maximum productivity. Supplied with a full set of detachable stabilisers to maximise trailer stability during tensioning. Fitted with smooth operating disk brake for conductor control. Advantages:

• Low centre of gravity • Off set drums to enhance stability during

towing • Independent disc braking of each drum • Standard drum drive pin location • Convenient storage area for stabilisers

(located in base frame)

SPECIFICATION

Drum Stand Length: 4750mm Width: 1800mm (without stabilisers) Height: 1650mm (without drums or

stabilisers) Weight: 1025kg Drum Max Diameter: 1200mm Max Width: 830mm Braking Capacity: 60kgm Drum Hole: 65 or 80mm (specify) Drum Weight (Max): 640kg

ORDERING DETAILS Product No Description C-1290-03 Triple Braked Drum Trailer D-804 Ground Anchor


D-496-01 Roll on Drum Stand D-496-01 Roll on Drum Stand allows a range of drums to be accommodated to suite the majority of applications. Manufactured in steel, with ball bearings in the rollers, the stand is suitable for pulling off cable from the drum. SPECIFICATION Maximum Drum Weight: 1500kg Maximum Drum Diameter: 1500mm Minimum Drum Diameter: 300mm Drum Width: Adjustable Height: 100mm Width: 200mm Length: 900mm Weight: 50kg D-998 Roll On Drum Stand Manufactured in steel, with sleeved bearings in the rollers, this portable lightweight unit is particularly suitable for small to medium drum sizes. SPECIFICATION Maximum Drum Weight: 500kg Maximum Drum Diameter: 600mm Minimum Drum Diameter: 300mm Drum Width: 600mm Height: 90mm Width: 630mm Length: 550mm Weight: 14kg

ORDERING DETAILS Product No Description D-496-01 Roll on Drum Stand ORDERING DETAILS Product No Description D-998 Roll on Drum Stand


Cable Drum Jacks Manufactured in a sturdy steel construction, with heavy-duty Acme screw threads to provide safe lifting. Lift 300mm. Cable Drum Jack Steady Base The angular steel construction base, increases the sizes of drums which ca be lifted by D-246-7-8 Drum Jacks, with increased stability. Effective height 300mm Cable Drum Spindles

ORDERING DETAILS

Product No Description Qty Req’d

D-246-1-F Drum Jack 3 Ton 2 D-247-F Drum Jack 6 Ton 2 D-248-1-F Drum Jack 8 Ton 2 D-454-F Drum Jack Steady 2 Base ORDERING DETAILS

Product No Description D-249 Drum Spindle –Solid

50x1220 D-250 Drum Spindle –Solid

75x1830 D-251 Drum Spindle –Solid

90x2300

SPECIFICATION (Per jack) Ref 3 Ton 6 Ton 8 Ton Height* 570mm 710mm 835mm Width 300mm 300mm 300mm Length 300mm 460mm 600mm Weight 19kg 23kg 36kg

SPECIFICATION Ref D-249 D-250 D-251 Dia 50mm 75mm 90mm Length 1220mm 1830mm 2300mm Weight 19kg 66kg 115kg


D-534 Swedish Drum Stand A traditional technique of braking conductor drums during the stringing operation. The stand is manufactured in tubular and channel steel sections, and can accommodate a range of drums. SPECIFICATION Max Drum Weight: 2000kg Max Drum Diameter: 1600mm Max Drum Width: 1000mm Spindle Diameter: 63.5mm Height (folded flat): 160mm Width: 1575mm Length: 1525mm Weight: 115kg D-692 Drum Cradle This universal drum handling aid finds use in drum storage yards for lifting drums for cable removal, or on site for pulling out conductors. SPECIFICATION D-692 Max Drum Diameter: 1500mm Max Drum Width: 800mm Height: 865mm Width: 1050mm Length: 1850mm Weight: 32kg SWL: 1200kg D-692-01 Max Drum Diameter: 1500mm Max Drum Width: 1000mm Height: 865mm Width: 1300mm Length: 1850mm Weight: 35kg SWL: 1200kg

ORDERING DETAILS Product No Description D-534 Swedish Drum Stand ORDERING DETAILS Product No Description D-692 Drum Cradle D-249 Drum Spindle – Solid

50x1220mm D-692-01 Drum Cradle – 1000mm Wide D-249-03 Drum Spindle – Solid

50x1500mm


D-684 Braked Drum Stand The CBS D-684 drum stand is compact in size. Each side is fitted with wheels to allow for easy transportation. Drum lifting is achieved with two hand operated hydraulic jacks. An adjustable band brake provides controlled cable tensioning. SPECIFICATION D-684-2-2 Max Drum Weight: 2000kg Max Drum Diameter: 2300mm Max Drum Width: 1500mm Spindle Diameter: 73mm Height: 500mm Width Per Side Frame: 730mm Length: 1760mm Weight: 209kg D-684-2-4 Max Drum Weight: 4000kg Max Drum Diameter: 1800mm Max Drum Width: 1500mm Spindle Diameter: 73mm Height: 500mm Width Per Side Frame: 730mm Length: 1760mm Weight: 209kg

ORDERING DETAILS Product No Description D-684-2-2 Braked Drum Stand

2000kg D-684-2-4 Braked Drum Stand 4000kg


D-711 Braked Drum Stand The CBS D-711 Braked Drum Stand has been designed in sections for ease of transportation and is simple to assemble. The stand incorporates a band brake to provide smooth cable tensioning. Two hydraulic pumps provide drum lifting. SPECIFICATION D-711 Max Drum Weight: 1500kg Max Drum Diameter: 1600mm Max Drum Width: 1000mm Spindle Diameter: 50mm Min Drum Diameter: 1000mm Height: 630mm Width: 1480mm Length: 1640mm D-711-1 Max Drum Weight: 1500kg Max Drum Diameter: 1200mm Max Drum Width: 1000mm Spindle Diameter: 50mm Min Drum Diameter: 600mm Height: 630mm Width: 1480mm Length: 1640mm D-711-01 Max Drum Weight: 1500kg Max Drum Diameter: 1900mm Max Drum Width: 1100mm Spindle Diameter: 50mm Min Drum Diameter: 900mm Height: 330mm Width: 1580mm Length: 1640mm

D-711-02 Max Drum Weight: 1500kg Max Drum Diameter: 1900mm Max Drum Width: 1300mm Spindle Diameter: 50mm Min Drum Diameter: 900mm Height: 930mm Width: 1780mm Length: 1640mm ORDERING DETAILS Product No Description D-711 Braked Drum Stand

1600mm Dia x 1000mm Wide D-711-1 Braked Drum Stand



1900mm Dia x 1300mm Wide


D-447 Drum Transporting Trolley A sturdy constructed drum trolley winch eases the lifting and transporting of drums in yards and stores. Also suitable for use as a drum stand. SPECIFICATION Max Drum Weight: 750kg Max Drum Diameter: 1250mm Max Drum Width: 930mm Width: 1400mm Length: 1450mm Height: 800mm Hydraulic Drum Jacks Lightweight hydraulic drum jacks are almost indispensable for use in the cable yard, are versatile and easily adjustable within seconds to accommodate a vast range of drums. Excellent all-round stability, fitted with wheels to be easily moved by one person. Complete with spindle and collars. SPECIFICATION Capacity/Pair 3 Tonne 6 Tonne Min Drum Dia: 800mm 880mm Max Drum Dia: 2500mm 3000mm Weight per pair: 106kg 118kg Spindle Weight: 30kg 53kg

ORDERING DETAILS Product No Description D-447 Drum Transporting Trolley ORDERING DETAILS Product No Description D-536-F Hydraulic Drum Jack – 3 Ton D-536-01-F Hydraulic Drum Jack – 6 Ton


W1-CDS-50H Conductor Drum Stand The drum stands are self-loading. Each stand can be raised or lowered independently, using a built-in jack. The stands are capable of carrying drums upto 6 tonnes in weight, and will accommodate drums upto 2.300mm in diameter. The stand is manufactured in two halves to allow easy access with full drums. The drive to the drum stands is provided via a combined motor/brake reduction gear assembly, which is secured directly to the end of the drum spindle. When used in conjunction with a Puller/Tensioner, the stands are connected to it via 20m long hoses, and quick release couplings to allow flexibility in positioning. The drive is fully hydrostatic and incorporates a spring applied/pressure release brake to positively hold the drum stationary when tensioning stops. These drum stands have been designed to accept a full range of conductor drums, ranging from 1200mm to 2200mm diameter and upto six tonnes in weight. SPECIFICATION

ORDERING DETAILS Product No Description W1-CDS-50H Conductor Drum Stand

Hydraulic Drive W1-CDS-50H-01 Conductor Drum Stand c/w

Disc Brake

Conductor Name Conductor Area Drum Dia Lynx 175mm² 1520mm

Zebra 400mm² 1830mm Rubus 500mm² 1830mm Totara 425mm² 1830mm

Araucaria 700mm² 2134mm


SECTION 3

CABLE BLOWING MACHINES: Breeze & Tornado

BREEZE Breeze Microcable Blowing Machine

Compressor & Lubricant

Micro Cable Fleeting Device Drum Stand & Cradle TORNADO Tornado Cable Blowing Machine Hydraulic Power Pack & Universalube Lubricant Compressors Compressed Air Cooler Cable Fleeter Duct Checking Equipment Plastic Duct Cutter & Duct Slitters Pressurisation Kit Tube Blowing Conversion Kits

J Junction Box TUBE BLOWING Tube Blowing Machine Hydraulic Power Pack Tube Blowing Kit

Tube Blowing Accessories ACCELAIR Blown Fibre Unit Blown Fibre Compressor


BREEZE Cable Blowing Machine The “BREEZE” Cable Blowing Machine has been designed to meet the growing need for the installation of micro cables. Small and portable with ergonomic controls, it is ideally suited for external or internal use. The compliant double driven cable rollers provide secure grip whilst safely handling the cable. The pushing force can be set to match the cable stiffness, and the speed control is fully adjustable between zero and maximum. Recent improvements to the machine implement a high/low torque switch giving greater sensitivity when adjusting low-end torque. This allows the installation of a greater range of cables down to 1mm in diameter. The machine is retained in a lightweight, robust aluminium housing and supplied completed with working/carrying case and “J” Mac air coupling. A full range of accessories is available to handle the cable and tube range. SPECIFICATION Cable Diameter: 1 to 8mm Tube Size (Outside Dia): 5.0 to 12mm Cable Speed (Adjustable): 0-62m/min Maximum Air Pressure: 15 Bar Power Requirement: 220/110 Volt AC 50/60 Hz SHIPPING SPECIFICATIONS (including travel case) Length: 470mm Width: 340mm Height: 490mm Weight: 40kg Supplied as 110V Ac 50/60 Hz (standard)

For 220/240v Ac 50 Hz Transformer C-TRANS-CM-7501 required

ORDERING DETAILS Product No Description C-1300 Breeze Cable Blowing Machine ACCESSORIES Steel Drive Wheel Kit C-1300-DW-S-KIT Soft Drive Wheels C-1300-DW-P-RUBBER


BREEZE Configuration for Cable Blowing In order to customise your new “Breeze” to your application, we ask that you pick, one each from the list below, the Tube Collet Assembly, the Cable Guide Assembly and the Cable Collet Assembly. When ordering, please have Tube and Cable dimensions available.

A) Tube Collet Assembly

Tube O.D Part No 5mm C-1300-TBC-05 7mm C-1300-TBC-07 8mm C-1300-TBC-08 10mm C-1300-TBC-10 12mm C-1300-TBC-12

B) Cable Guide Range Cable Range Part No 1.0 – 2.5mm C-1300-AS1041-3880 2.5 – 3.8mm C-1300-AS1041-2538 3.8 – 8.0mm C-1300-AS1041-3880

C) Cable Collet Assembly

Cable Size Part No 2.5 – 3.0mm C-1300-CBL-2530 3.0 – 3.8mm C-1300-CBL-3038 3.8 – 5.0mm C-1300-CBL-3850 5.0 – 6.4mm C-1300-CBL-5064 6.4 – 8.0mm C-1300-CBL-6480

For Cable range 1mm – 2.5mm please contact CBS Products Ltd for parts selection.

CBS Products Ltd, Pillings Road, Oakham, Rutland, LE15 6QF, UK Tel: +44(0) 1572 723 665 Fax: +44(0) 1572 756 009 E-mail: [email protected] Website: www.cbsproducts.com

Breeze Cable Blowing Machine For Cable range 1 mm – 2.4 mm CABLE SIZE

1.0 mm Part Assy for 1.0 mm Cable C-1300-CBL-102010

1.1 mm Part Assy for 1.1 mm Cable C-1300-CBL-102011 1.2 mm Part Assy for 1.2 mm Cable C-1300-CBL-102012 1.3 mm Part Assy for 1.3 mm Cable C-1300-CBL-102013




2.3 mm Part Assy for 2.3 mm Cable C-1300-CBL-102523 2.4 mm Part Assy for 2.4 mm Cable C-1300-CBL-102524

NOTE: For use only with Drive Wheels C-1300-DW-P-RUBBER


Breeze Accessories C-1300-DW-S-KIT Metal Drive Wheel Kit Under certain conditions, e.g. in series blowing where lubricant is used, knurled metal drive wheels offer increased grip on the cable. The kit comprises of a pair of drive wheels and a sprung loaded mechanism allowing the drive to compensate for variances in cable diameter whilst applying a consistent load. C-1300-DW-P-RUBBER Black Drive Wheels These drive wheels have parallel (ungrooved) surfaces and are made of a softer material than standard, C-1300-DW-90 drive wheels. Recommended for use with small cables 1.00mm to 2.5mm or when extra grip is required.

ORDERING DETAILS Product No Description C-1300-DW-S-KIT Metal Drive Wheel Kit

ORDERING DETAILS Product No Description C-1300-DW-P-RUBBER Black Drive Wheels


Cable Blowing Compressor M17 Compressor specifically for use with Breeze Cable Blowing Machine having 15 bar pressure with 1000 litres/m (35.3cfm) flow. The compressor is fitted with an aftercooler and water separator and comes mounted on a two-wheeled trolley. SPECIFICATION Engine: Honda 21.5HP Fuel Tank Capacity: 20 litres Length: 1200mm Width: 800mm Height: 780mm Weight: 205kg MicroGlide Lubricant CBS Micro Glide is a water-based preparation of a blend of polymers. It is easily applied and exhibits excellent coverage. It is non-toxic, non-flammable and has no physical or chemical effects on cable sheath or sub-duct. It can be used on cable blowing or pulling. Typical Properties Appearance: Milky Mobile Liquid SG: Approx 1 Viscosity: 2500 – 4000 cst PH: 6 - 8 Note: A Technical Data Sheet is provided when ordering Lubricant

ORDERING DETAILS Product No Description C-M17-15 Compressor (Breeze) ORDERING DETAILS Product No Description C-1313-250 Micro Glide Lubricant –

250ml C-1313-5000 Micro Glide Lubricant – 5 Lts


Micro Cable Fleeting Device The Micro Cable Fleeting device has been developed to enable longer lengths of fibre optical cable to be laid from a single drum. Employed when the cable needs to be removed from the cable drum, in preparation for blowing the second section. SPECIFICATION Cable Diameter: 5 – 8mm Max Cable Length: 2000m BASKET SIZE: Diameter: 1200mm Max Width: 1285mm Unit Height: 1420mm Weight: 43.5kg

ORDERING DETAILS Product No Description C-1315-20-08 Cable Fleeter


Breeze Cable Drum Stand The Drum Stand has been designed in sections for ease of transportation and simply slots together to form a rigid and stable drum stand. The shaft is fitted with bearings and drum location collars are also included. Two hydraulic jacks provide drum lifting. SPECIFICATION D-1156 D-1156-01 Max Drum Weight: 250kg 500kg Min Drum Diameter: 900mm 900mm Max Drum Diameter: 1200mm 1200mm Max Drum Width: 600mm 800mm Length: 1278mm 1278mm Width: 1070mm 1270mm Height: 615mm 615mm Spindle Diameter: 51mm 51mm Weight: 85kg 98kg Breeze Cable Drum Cradle The Drum Cradle has been designed to lift 2 x 1200 mm maximum diameter of micro duct with a total weight of 200kg. The Drum Cradle is a rigid tubular steel construction with a detachable drum spindle and drum spacer, the drum spacer prevents the drums from rotating against each other. The drum shaft is locked in position by a sprung loaded plunger that can be fixed to allow removal of the drum spindle. When the drums are loaded into the frame the handle can be swung over such that the ground frame is upper most and used to move the drums around the site. SPECIFICATION Max Drum Weight: 200kg Max Drum Width: 850mm Max Drum Diameter: 1200mm Min Drum Bore: 63mm Length: 1110mm Width: 1200mm Height: 790mm Weight (Empty): 32kg

ORDERING DETAILS Product No Description D-1156 Drum Stand D-1156-01 Drum Stand ORDERING DETAILS Product No Description C-1325 Cable Drum Cradle


Tornado Plus Cable Blowing Machine Duct range 25-63mm, cable range 6-32mm General Description The cable blowing machine, comprising an air box and cable pusher, has been designed to provide an effective and safe method of fibre optic cable installation. The system installs fibre optic cable of 6mm (0.25”) to 32mm (1.25”) overall diameter, at speeds up to 90m/min (300ft / min), into pre-installed ducts. The system operates on the viscous drag principle employing compressed air to install the cable, controlled and assisted by the belt drive system. The cable is propelled by compressed air, fed into the duct via a venturi principle, while the hydraulically powered belt drive system controls the fibre optic cable. The electronic monitoring system provides read out of speed and distance, gives protection against duct obstructions and includes an emergency stop facility. The system is mounted on an anti -corrosion treated, sturdy, height adjustable, wheeled, tubular steel trolley. This allows the unit to be wheeled around on site. The C-1200 hydraulic petrol driven power pack provides power. The unit is CE approved. Features Fully labelled control panel containing: • Power on/off button • Emergency stop button • Reset button • Combined length counter recording in metres (feet) and

cable speed read out in metres/min (feet/min) • Hydraulic pressure read out dial • Air pressure read out dial • Hydraulic on/off control valve • Adjustable speed control for drive belts • Air supply control on/off with automatic exhaust function Chassis • Front mounted wheels for ease of manoeuvrability • Lightweight anti -corrosion treated tubular steel frame • Adjustable frame allowing unit to be tilted up to 30°,

reducing bending of duct and cable • Adjustable rear legs for uneven terrain Air Box • Manufactured in aluminium • Range taking of cables from 6mm – 32mm (0.25”-1.25”) by

means of interchangeable collets with double cable sealing arrangement

• Duct sealing at mouth of air box • Duct gripping facility designed to obviate duct crushing and

distortion • All seals, except cable seals, have a common diameter cord • Upper section of air box is retained • Air box aligned is adjustable for varying cable diameters • No tools are required to split air box for insertion of cable

and duct • On/off air control valve with automatic air exhaust from

duct when in “off” position

Storage Case Comprising • Operating Manual • Instructional Video Cable Feeder • Manufactured in cast aluminium • Hydraulically powered • Unit lifts and splits to allow insertion of cable between

drive belts • Drive belts are profiled polyurethane, moulded • Belt tension can be set by means of adjustable chain drive

tensioners fitted to the side of the unit • System relief valve fitted as standard Tool Box • 3mm Allen Key • 4mm Allen Key • 5mm Allen Key • 6mm Allen Key • 3mm dia. Cord x 2.5 metres long • Silicone Grease • Super Glue • Metaflux 70-88 Chain Spray • Pliers 150mm • Screwdriver 150mm (slot) • Knife • 13-17mm A/F Spanner

NB: Please Specify Cable And Duct Diameters When Ordering


TORNADO Configuration for Cable Blowing

In order to customise your new “Tornado” to your application, we ask that you pick, one each from the list below, the Duct Clamp Collet (A), the Duct Seal Collet (B), the Cable Collet Assy (C) and the In Feed Cable Collet (D), the Cable Seals (E) and the Cable Seal Plug F). When ordering, please have Tube and Cable dimensions available.

A) Duct Clamp Collet Duct O.D Part No

25mm C-1258-0200-25 32mm C-1258-0200-32 38mm C-1258-0200-38 40mm C-1258-0200-40 50mm C-1258-0200-50

B) Duct Seal Collet Duct O.D Part No

25mm C-1257-0202-25 32mm C-1257-0202-32 38mm C-1257-0202-38 40mm C-1257-0202-40 50mm C-1257-0202-50

C) Cable Collet Assembly & D) In-Feed Cable Collet Cable Diameter Part No for Cable Collet Assy

(C) Part No for In-Feed Cable Collet

(D) 6-9mm C-1256-0103-06-09 C-1256-0104-06-09 9-12mm C-1256-0103-09-12 C-1256-0104-09-12 12-16mm C-1256-0103-12-16 C-1256-0103-12-16 16-20mm C-1256-0103-16-20 C-1256-0103-16-20 20-24mm C-1256-0103-20-24 C-1256-0103-20-24 24-28mm C-1256-0103-24-28 C-1256-0103-24-28 28-32mm C-1256-0103-28-32 C-1256-0103-28-32


TORNADO Configuration for Cable Blowing – Con’t/d

E) Cable Seals (Supplied in Packs of 10 Seals)

Cable Diameter Part No 6-7.5mm C-1255-0208-06-07.5 7.5-9mm C-1255-0208-07.5-09 9-10.5mm C-1255-0208-09-10.5 10.5-12mm C-1255-0208-10.5-12 12-14mm C-1255-0208-12-14-F 14-16mm C-1255-0208-14-16-F 16-18mm C-1255-0208-16-18-F 18-20mm C-1255-0208-18-20-F 20-22mm C-1255-0208-20-22-F 22-24mm C-1255-0208-22-24-F 24-26mm C-1255-0208-24-26-F 26-28mm C-1255-0208-26-28-F 28-30mm C-1255-0208-28-30-F 30-32mm C-1255-0208-30-32-F

F) Cable Seal Plugs

Cable Diameter Part No 6-7.5mm C-1256-0206-07.5 7.5-9mm C-1256-0206-09 9-10.5mm C-1256-0206-10.5 10.5-12mm C-1256-0206-12 12-14mm C-1256-0206-14 14-16mm C-1256-0206-16 16-18mm C-1256-0206-18 18-20mm C-1256-0206-20 20-22mm C-1256-0206-22 22-24mm C-1256-0206-24 24-26mm C-1256-0206-26 26-28mm C-1256-0206-28 28-30mm C-1256-0206-30 30-32mm C-1256-0206-32

All imperial sizes are available on request


Hydraulic Power Pack A lightweight, trolley mounted, hydraulic power pack, with pre-set internal system protection relief valve and quick release connectors. The unit is powered by an air-cooled, 6hp petrol driven engine, delivering 15 litres/min at upto 120 bar from the hydraulic circuit. The circuit is protected with return line and suction filters. The unit is mounted on a robust, pneumatic wheeled, trolley and is supplied with 2 x 7m storable hydraulic hoses, complete with quick release couplings. The unit is CE approved. SPECIFICATION Height: 960mm Length: 820mm Width: 510mm Weight (incl. Hoses): 60kg Hydraulic Tank Capacity: 22 litres Universalube Universalube is a water-based preparation based on wax and silicone polymers. It is easily applied and exhibits excellent coverage. It is non-toxic, non-flammable and has no physical or chemical effects on cable sheath or sub duct. It can be used on cable blowing, cable pulling or duct pushing. Typical Properties Appearance: Milky Mobile Liquid SG: Approx 1 Viscosity: 2500 – 4000 cst PH: 6 - 8

ORDERING DETAILS Product No Description C-1200-0543-01 Hydraulic Power Pack c/w

Trolley – Petrol Driven Engine

C-1200-0543D-01 Hydraulic Power Pack c/w

Trolley – Diesel Driven Engine

ORDERING DETAILS Product No Description C-LUBE-02-F Universalube Lubricant –

20 Lts


Compressors All compressors are fitted with air coolers, condensation separator and air filtration and come mounted on a two-wheel trailer. SPECIFICATION Note: Above are the minimum requirements based on duct diameter. Always select the compressor size to suit the largest duct diameter. For larger duct sizes consult CBS Products Ltd.

Duct Inner Output Length over Bore Model Make at 12 Bar (174 psi) Weight towbar Width Height 20-25mm C-M80-F Kaeser 215 cfm (6.1m³/min) 1480kg 4.50m 1.78m 1.51m 25-32mm C-M100-F Kaeser 254 cfm (7.2m³/min) 1465kg 4.12m 1.78m 1.51m 32-40mm C-XAHS Atlas 370 cfm (10.5m³/min) 1883kg 4.5m 1.70m 1.66m

186-F Copco


Compressed Air Cooler Ideally the compressed air entering the Cable Blowing Machine should be cool and moisture free to optimise the cable blowing process. This is achieved by a Compressed Air Cooler. The air cooler, fitted with an air driven fan, is installed between the compressor and blowing machine. The unit is fitted with an air driven fan. The air supply is filtered and lubricated and has a water separator with an automatic condensate drain. Operating at pressures up to 15 Bar, capacity 370cfm. SPECIFICATION SHIPPING DIMENSIONS Length: 1.2m Width: 0.78m Height: 1.4m Weight: 124kg

ORDERING DETAILS Product No Description C-1226-02 Trolley Mounted Aftercooler Unit


Cable Fleeter The Fleeter replaces the manual method of “figure of eighting” cable, and provides protection and security for the cable. Following installation of the cable in the first leg of the duct route the balance of the cable is removed from the drum and fed into the “Fleeter”, thereby releasing the cable end ready for blowing into the second leg. The Fleeter provides a smooth and simple system whilst ensuring cable protection from pedestrians or vehicles and prevents contamination from mud, soil or dust. The Fleeter is designed to work in conjunction with the Cable Blowing Machine, which provides the cable feed in and out of the “Fleeter”. The unit accepts 2,000 metres of 13mm cable, allowing drum lengths of 4,000 metres to be utilized. The Fleeter consists of a road going trailer chassis upon which is mounted a cable storage cassette, rotating cable guide quadrant and duct clamp assembly. SPECIFICATION Dimensions: 3.42m long x 2.3m wide x 2.33m high Tyre Size: 145R 10 Brakes: Interia type brakes with auto

reverse Cassette: 2m x 0.85m high Rear Corner Steadies: 2 off Spirit Level Mounted: 1 off Towing Hitch: Eye – 30mm, 40mm, 50mm Ball Type – 50mm Specify at time of ordering Weight: 325kg

ORDERING DETAILS Product No Description C-1265-20-01-R1 Cable Fleeting Device


Duct Checking Equipment Direct buried ducts can suffer from compaction, reduction or other obstructions, therefore, before cable installation begins, CBS recommends that each length of duct is checked for continuity and freedom from obstruction. Various items of hardware are available for checking the ducts. A precision locator supplied with an appropriate duct Sonde(s), allows the duct route to be checked for continuity. The Sonde transmitter is blown along the route length, stopping at any blockage. The blockage is found by locating the Sonde with the locator. Please state the duct inside dimensions when ordering.

ORDERING DETAILS


C-RD-CAT-F Precision Locator

ORDERING DETAILS


C-R-SONDE-29 Missile Sonde – 29mm C-R-SONDE-33 Missile Sonde – 33mm C-R-SONDE-38 Missile Sonde – 38mm C-R-SONDE-40 Missile Sonde – 40mm C-R-SONDE-45 Missile Sonde – 45mm C-R-SONDE-50 Missile Sonde – 50mm


Plastic Duct Cutter Quick and easy to use the adjustable die cast circumferential cutter provides a clean cut of plastic ducts SPECIFICATION Duct Dia Range: 13 – 43mm 25 – 81mm Plastic Duct Slitter Tool for longitudinal cutting of duct, and removal of spare duct from installed cable

ORDERING DETAILS Product No Description D-291-12-43-F Duct Cutter 12-43mm D-291-25-81-F Duct Cutter 25-81mm D-291-01-F Spare Cutter Wheel ORDERING DETAILS Product No Description D-290-F Plastic Duct Slitter D-290-01-F Spare Blade


Pressurisation Kit The CBS Duct Pressurisation Kit has been designed to test the integrity of the duct by checking that the duct has no leaks. This will confirm that the duct holds air pressure, prior to cable blowing. The kit comprises of a pressure regulator with gauge and valves. The system connects to the compressor and the duct for pressurising. Once up to pressure the air in the duct is locked in and the pressure monitored.

ORDERING DETAILS Product No Description C-1262 Pressurisation Kit C-1262-50 50mm Duct Connector C-1262-40 40mm Duct Connector C-1262-32 32mm Duct Connector C-1262-25 25mm Duct Connector Other sizes of duct connector are available, please consult.


Tube Blowing Conversion Kits The tube blowing conversion kits are initially used to convert an existing Tornado Cable Blowing Machine into a Tube Blowing Machine for installing micro tubes into ducts. If additional Tube Bundle Configurations were required, additional Tube Kits would be needed. Each Conversion Kit Contains:- 2 off – Hydraulic Motors 2 off – Drive Chassis (upper & lower) 1 off – Tube Guide Collet 1 off – Tube Guide & Screws 1 off – Roller Bracket Assembly 1 off – Venturi Collet Tube Conversion Kits Tube Bundle Tube Kit Codes Configurations 3 x 12mm C-1250-CON-3x12 4 x 12mm C-1250-CON-4x12 7 x 10mm C-1250-CON-7x10 5 x 10mm C-1250-CON-5x10 4 x 10mm C-1250-CON-4x10 3 x 10mm C-1250-CON-3x10 10 x 7mm C-1250-CON-10x7 7 x 7mm C-1250-CON-7x7 6 x 7mm C-1250-CON-6x7 Other Tube Bundle Configurations available on request (please consult)


C-1253 CABLE OVERBLOWING JUNCTION BOX The CBS Cable Overblowing Junction Box has been designed to install a new cable or duct-tubes into an existing occupied sub-duct (subject to space being available). The Cable Overblowing Junction Box comprises a robust aluminium base and lid that form a pressurised air chamber into which one end of an existing occupied sub-duct can be attached. The existing cable can exit the Cable Overblowing Junction Box through an opening that has 3 cable seal slots, one of which will house the seal to suit the size of the existing cable. The third branch is then connected to a CBS Cable Blowing Machine via. a short slave length of sub-duct for the installation of the extra cable or tube(s). A range of Overblowing junction boxes are available to suit the outside diameter of the sub-duct. CABLE DIAMETERS The maximum diameter of a new cable / tube(s) for installation is dependent on the diameter of the existing cable and duct bore. It is the responsibility of the operator to ensure that the cable / tube(s) to be installed are compatible with the existing sub-duct and installed cable configuration. Cable range limit 9-20 mm O.D. Duct range (Note: one duct O.D. size per unit) Minimum 25 mm O.D Maximum 50 mm O.D

INSTALLATION PRINCIPLE Viscous Drag

PNUEMATIC SYSTEM Max. operating pressure 12 Bar For Ducts with an Inner Diameter of: Minimum Flow Acceptable 0 up to 25mm : 4m³/min 150 CFM 26 up to 30mm : 5m³/min 185 CFM 31 up to 35mm : 7m³/min 250 CFM 36 up to 40mm : 10m³/min 375 CFM 41 up to 44mm : 12m³/min 450 CFM DIMENSIONS LENGTH: 295 mm HEIGHT: 74 mm WIDTH: 170 mm WEIGHT: 4 kg ORDERING DETAILS Product No Description C-1253-25 25mm Duct o.d. C-1253-32 32mm Duct o.d. C-1253-38 38mm Duct o.d. C-1253-40 40mm Duct o.d. C-1253-50 50mm Duct o.d. Other sizes available on request. For unit with interchangeable collet sizes see C-1254.


‘J’ Junction Box The CBS Cable Overblowing Junction Box has been designed to install a new cable into an existing occupied sub-duct (subject to space being available). Or alternatively used for blowing micro tubes over previously installed cable. The Cable Overblowing Junction Box comprises a robust aluminium base and lid that form a pressurised air chamber into which one end of an existing occupied sub-duct can be attached. The existing cable can exit the Cable Overblowing Junction Box from either of the two branches to suit the best installation, the vacant branch is then connected to a CBS Cable Blowing Machine via a short slave length of sub-duct for the installation of the extra cable. A range of customer selected cable seals, cable collets and sub-duct collets are available for cable or duct tube installation using the CBS Overblowing Junction Box. SPECIFICATION Cable Diameters The maximum diameter of a new cable for installation is dependent on the diameter of the existing cable and the duct size. Cable Range Limit: 6 – 20mm O/D Duct Range Limit: 40 – 63mm O/D Installation Principle: Viscous Drag Max Operating Pressure: 12 Bar Length: 455mm Width: 330mm Height: 180mm Weight: 25kg (no collets) 29kg (with collets)

ORDERING DETAILS Product No Description C-1254-001-01 Junction Box NB: Please specify Duct and Cable Sizes when ordering Duct Inner Dia Minimum Flow Acceptance

0 upto 25mm 4m³/min 150 cfm 26 upto 30mm 5m³/min 185 cfm 31 upto 35mm 7m³/min 250 cfm 36 upto 40mm 10m³/min 375 cfm 41 upto 44mm 12m³/min 450 cfm


Tornado Tube Blowing Machine The tube-blowing machine, comprising an air box and pusher, has been designed to provide an effective and safe method of installing Micro-tubes. The system operates on the viscous drag principle employing compressed air to install the tubes, controlled and assisted by a belt drive system. The tubes are propelled by compressed air, fed into the duct via a venturi principle, while the hydraulically powered belt drive system controls the micro-tubes. The electronic monitoring system provides read out of speed and distance, gives protection against duct obstructions and includes an emergency stop facility. The system is mounted on an anti corrosion treated, sturdy, height adjustable, wheeled, tubular steel trolley. This allows the unit to be wheeled around on site; in addition the system can also be detached from the trolley. The C-1200 hydraulic petrol driven power pack provides power. The unit is CE approved. Features Fully labelled control panel containing: • Power on/off button • Emergency stop button • Reset button • Combined length counter recording in metres (feet) and

cable speed read out in metres/min (feet/min) • Hydraulic pressure read out dial • Air pressure read out dial • Hydraulic on/off control valve • Adjustable speed control for drive belts • Air supply control on/off with automatic exhaust function Air Box • Manufactured in aluminium • Range taking of varying combinations of tub configurations

by means of interchangeable collets • Duct sealing at mouth of air box • Duct gripping facility designed to obviate duct crushing and

distortion • Upper section of airbox is retained • Air box aligned is adjustable for varying tube configurations • No tools are required to split air box for insertion of tubes

and duct • On/off air control valve with automatic air exhaust from

duct when in “off” position

Tool Box • 3mm Allen Key • 4mm Allen Key • 5mm Allen Key • 6mm Allen Key • 3mm dia. Cord x 2.5 metres long • Silicone Grease • Super Glue • Metaflux 70-88 Chain Spray • Pliers 150mm • Screwdriver 150mm (slot) • Knife • 13 x 17mm A/F Spanner Chassis • Front mounted wheels for ease of manoeuvrability • Lightweight anti -corrosion treated tubular steel frame • Adjustable frame allowing unit to be tilted up to 30°,

reducing bending of duct and tubes • Adjustable rear legs for uneven terrain Cable Feeder • Manufactured in cast aluminium • Hydraulically powered • Unit lifts and splits to allow insertion of cable between

drive belts • Drive belts are profiled polyurethane, moulded • Belt tension can be set by means of adjustable chain drive

tensioners fitted to the side of the unit • System relief valve fitted as standard


Hydraulic Power Pack A lightweight, trolley mounted, hydraulic power pack, with pre-set internal system protection relief valve and quick release connectors. The unit is powered by an air-cooled, 6hp petrol driven engine, delivering 15 litres/min at upto 120 bar from the hydraulic circuit. The circuit is protected with return line and suction filters. The unit is mounted on a robust, pneumatic wheeled, trolley and is supplied with 2 x 7m storable hydraulic hoses, complete with quick release couplings. The unit is CE approved. SPECIFICATION Height: 960mm Length: 820mm Width: 510mm Weight (incl. Hoses): 60kg Hydraulic Tank Capacity: 22 litres

ORDERING DETAILS Product No Description C-1200-0543-01 Hydraulic Power Pack c/w

Trolley – Petrol Driven Engine

C-1200-0543D-01 Hydraulic Power Pack c/w

Trolley – Diesel Driven Engine


Tube Blowing Kit TABLE 1: Tube Kits

Tube Bundle Configurations

Tube Kit Codes

2 x 12mm C-1250-TBK-2x12 3 x 12mm C-1250-TBK-3x12 4 x 12mm C-1250-TBK-4x12

7 x 10mm C-1250-TBK-7x10 5 x 10mm C-1250-TBK-5x10 4 x 10mm C-1250-TBK-4x10 3 x 10mm C-1250-TBK-3x10 2 x 10mm C-1250-TBK-2x10

10 x 7mm C-1250-TBK-10x7 7 x 7mm C-1250-TBK-7x7 6 x 7mm C-1250-TBK-6x7 5 x 7mm C-1250-TBK-5x7

Other Tube Bundle Configurations available on request TABLE 2: Metric Duct Sizes

Duct Outside Diameter (mm)

Colour Duct Clamp Collets Code

Duct Seal Collets Code

25 Blue C-1258-0200-25 C-1257-0202-25 32 Gold C-1258-0200-32 C-1257-0202-32 38 Silver C-1258-0200-38 C-1257-0202-38 40 Red C-1258-0200-40 C-1257-0202-40 50 Black C-1258-0200-50 C-1257-0202-50

Tornado Tube Blowing Kit includes the following: • Tube Blowing Machine • C-1200 Hydraulic Power Pack including 2x7m hoses • 1 off – Tube Kit (Select from Table 1 below) • 1 off – Sub Duct Clamp Collet (Select from Table 2 below) • 1 off – Sub Duct Seal Collet (Select from Table 2 below)


Tube Blowing Accessories CBS has developed a micro tube pressuring system, which prevent potential problems where the blowing air can collapse the tubes. The system charges the tubes on their drums, this keeps the micro tubes stiff and resilient during the tube installation procedure. Therefore before tube installation beings, CBS recommends that each length of tube is pressurised with use of the following equipment. Micro-Tube Pressurisation Product No Description C-1250-002 Tube Pressure Inflator c/w Jmac

Tube Pressure Adaptor Product No Description C-1250-001-07 Tube Pressure Adaptor 7mm C-1250-001-10 Tube Pressure Adaptor 10mm C-1250-001-12 Tube Pressure Adaptor 12mm Heat Shrink Caps Product No Description C-1250-001-HS-20 Heat Shrink Caps (Pack of 20)


Blown Fibre Unit The Blown Fibre Machine has been developed to complement the existing range of fibre cable blowing equipment available from CBS Products Ltd. The Blown Fibre Machine is designed to fit the smaller end of fibre range from 2 to 12 fibres (1 to 2mm diameter), thereby providing the complete range of fibre blowing installation systems from one company. A compact integrated fibre-blowing machine. The machine benefits from full automation and fibre management – sophisticated fibre protection is implemented to ensure the fibre mechanical and optical integrity is maintained. The machine is self contained and only requires a single electrical supply and compressed air to operate. SPECIFICATION Fibre Compatibility: 1mm and 1.4mm as standard –

any size to 2mm by request. Blowing Distance: Typically 1000m (this is

dependent on circumstances). Blowing Speed: Auto or manual control to 40

metres per minute. Compatible Tubes: 3mm, 4mm and 5mm

standard. Any size up to 12mm on request.

Automation: Press a button to start and

the machine does the rest. Air Supply: 15 Bar max working pressure

– conditioned to specification for C-1420-10 compatible compressor.

Electrical Supply: 24V DC, 1 Amp. A range of

AC and DC transformers is available for connection to different mains and vehicle supplies used around the world.

Physical: H: 140mm D: 120mm x

127mm. Weight: 3kg. Carry Box: H: 200mm D: 380mm x

390mm. Weight (all in): 5kg Environment: +5°C to +35°C

ORDERING DETAILS Product No Description

C-1400 Accelair Fibre Blowing Machine c/w Power Cable, Universal Mains Supply, Fibre Blowing Table, Air Stop End Kit, 5mm Connector, 4mm Adapter and 3 mm Adapter.

Machine custom set for your fibre.


SPARES FOR ACCELAIR Universal Mains Power Supply Optional Mains power supply for the Accelair, will accept 85-265 Va.c. (47-440 Hz) input and give 24Vd.c. output. Fibre Blowing Table This provides a stable platform to carry out the blowing operation. The table comes complete with tube and fibre guides leaving the operator to concentrate on the installation. The on/off valve enables point of use control over the air supply to the Accelair while an air regulator allows the operator to vary the air pressure supplied. Air Stop End Kit This device blocks the far end of the tube while allowing air to escape, this in turn enables the Accelair to detect when the fibre has reached the end of its installation

ORDERING DETAILS

Product No Description C-1400-UMPS-115 Universal Mains Power

Supply 115v C-1400-UMPS-220 Universal Mains Power

Supply 220v

ORDERING DETAILS

Product No Description C-1401 Fibre Blowing Table

ORDERING DETAILS

Product No Description C-1400-ASEK Air Stop End Kit


Air Flowmeter Attached to the end of the tube, this indicates the airflow exiting the installation route giving an indication of tube integrity and complexity. As a general rule if you get 16-18 l/min or more of air exiting the tube the Accelair will install the fibre. 5mm Clear Tube Connector These connect 5mm tube to 5mm tube with the added advantage of being clear; this enables the installer to see the presence of fibre without depressurising or disconnecting the system. Blown Fibre Beads These beads are crimped to the fibre to help protect the end and assist in the blowing.

ORDERING DETAILS Product No Description C-1400-FM Air Flowmeter

ORDERING DETAILS Product No Description C-CON-NC621 5mm Clear Tube Connector

(Pack of 10)

ORDERING DETAILS

Product No Description C-1400-BFB-12F Blown Fibre Beads Large

(8/12 Fibre) – Pack of 25 C-1400-BFB-4F Blown Fibre Beads

(2/4 Fibre) – Pack of 25


Blown Fibre Compressor

A compact 10 Bar compressor specifically for use with the CBS Blown Fibre Unit. The compressor is fitted with aftercooling, filtration and air drying essential in providing the optimum viscous drag effect for maximum fibre blowing length. SPECIFICATION Power Source: Petrol air-cooled Honda

engine, pull chord start.

Air Compressor: Hydrovane, Vane type delivering 240l/min @ 10 Bar.

Electrical Output: 24V DC for powering C-1400

Blown Fibre Unit.

Air Conditioning: Membrane dryer providing +1oC Pressure Dew Point based on +35oC inlet temperature and maximum flow. Filtration to 0.01µm particulate and oil removal.

Temperature Spec: Ambient range +5oC to +40oC

Cooling to maintain air temperature to within +2oC of ambient.

Length: 790mm Width: 420mm Height: 580mm Weight: 80 kg

ORDERING DETAILS


C-1420-10 Fibre Blowing Compressor


SECTION 4

Duct Rods & Accessories

Duct Rods Duct Rod Accessories (Threaded Ends, Ferrules) Sprint Conduit Rod & Accessories Cable Pulling Grips


Duct Rods A high quality fibreglass rod, specially constructed to provide exceptionally high tensile strengths, whilst retaining flexibility. The 80% fill rate glass fibre core is reinforced with a high strength resin. A braided reinforcing wrap is added before the final polypropylene wear resistant protective coating is applied. The continuous rods range from 4.5mm – 14mm with lengths from 30 metres – 300 metres. Product No Length

of Rod Weight Cassette

Dia mm Length

mm Width

mm Height

mm Min. Bend Radius mm

Breaking Strength kg

Mini Rod 4.5mm B-101-030 30m 4.5kg B-101-050 50m 4.8kg B-101-060 60m 5.0kg B-101-070 70m 5.3kg B-101-080 80m 5.5kg

400 400 162 520 140 770

Midi Rod 6.7mm B-102-060 60m 9kg B-102-080 80m 10kg B-102-100 100m 11kg B-102-150 150m 13kg

600 600 210 730 250 2500

Maxi Rod 9.0mm B-103-060-800 60m 29kg B-103-080-800 80m 31kg B-103-100-800 100m 33kg B-103-120-800 120m 35kg B-103-150-800 150m 38kg

800 850 520 940 310 3800

Maxi Rod 11mm B-104-100-1000 100m 42kg B-104-150-1000 150m 48kg B-104-200-1000 200m 55kg B-104-250-1000 250m 62kg B-104-300-1000 300m 69kg

1000 1110 520 1130 390 6000

Maxi Rod 14mm B-105-150-1200 150m 70kg B-105-200-1200 200m 84kg B-105-250-1200 250m 98kg B-105-300-1200 300m 113kg

1200 1300 550 1300 500 9000

Spare Rod is available for all models. For example:- B-101-030-01 Spare Rod 30m

Rod Specification Core Rod: E-Glass+Vinylester Coating: Polypropylene, UV Stabilised


Threaded Rod End Fitting A male rod end fitting is supplied as standard with mini, midi and maxi rods. Replacement threaded rod end fittings allow the connection to other duct rod accessories, such as tapered rod ends, flexible guide ends, roller guides etc. Male and Female ends are available with M5, M6 and M12 threads. Male Thread ORDERING DETAILS Product No Description B-101-END-M-F End for 4.5mm Mini Rods B-102-END-M-F End for 6.7mm Midi Rods B-103-END-M-F End for 9mm Maxi Rods B-104-END-M-F End for 11mm Maxi Rods B-105-END-M-F End for 14mm Maxi Rods Female Thread ORDERING DETAILS Product No Description B-101-END-F-F End for 4.5mm Mini Rods B-102-END-F-F End for 6.7mm Midi Rods B-103-END-F-F End for 9mm Maxi Rods B-104-END-F-F End for 11mm Maxi Rods B-105-END-F-F End for 14mm Maxi Rods

Flexible Guide End Used to guide duct rods around bends. Available for use with maxi rods. ORDERING DETAILS Product No Description B-103-4-FLEX Flexible Guide End for Maxi

Rods Jointing Ferrule Used to repair breakages in mini, midi and maxi rods. The ferrule is bonded to the rod with a two part adhesive. ORDERING DETAILS Product No Description B-101-FERR-F Ferrule for 4.5mm Mini Rods B-102-FERR-F Ferrule for 6.7mm Midi Rods B-103-FERR-F Ferrule for 9mm Maxi Rods B-104-FERR-F Ferrule for 11mm Maxi Rods B-105-FERR-F Ferrule for 14mm Maxi Rods


Shackle Used with tapered rod end when a larger pulling loop is required. Available for mini, midi and maxi rods ORDERING DETAILS Product No Description B-101-2-SHACK-F Shackle for Mini & Midi Rods B-103-4-SHACK-F Shackle for Maxi Rods Tapered Rod End Supplied as standard with mini, midi and maxi rods, to guide the rod through the duct and allow the pulling rope to be attached to the rod. ORDERING DETAILS Product No Description B-101-TIP-F Tapered Rod End for Mini

Rods B-102-TIP-F Tapered Rod End for Midi

Rods B-103-4-TIP-F Tapered Rod End for Maxi

Rods

Roller Guide Used in connection with maxi rods, this roller guide allows the duct rod to pass around bends and duct misalignments. SPECIFICATION Rod Diameter: 9mm / 11mm Duct Diameter: 60mm

ORDERING DETAILS Product No Description B-103-4-ROLL Roller Guide for Maxi Rods Swivel Connector Used to connect two duct rods together when the required rodding length exceeds a single duct rod. Available for use with 9mm and 11mm maxi rods. ORDERING DETAILS Product No Description B-103-4-SWIV Swivel Connector for

Maxi Rods


Sprint Conduit Rod The CBS Sprint Rod is a handy device for smaller conduit applications, using 3mm polypropylene-coated fibreglass rod in lengths ranging from 20m –50m. A range of accessories such as flexible ends, fixed ends and pulling eyes are available, which can be stored in the central compartment of the plastic cassette. The product is lightweight, with a carrying handle and is ideal for short rodding applications.

ORDERING DETAILS Product No Description B-100-240-F Cassette without Rod B-100-020-01 Fibre Glass Rod 20m B-100-030-01 Fibre Glass Rod 30m B-100-040-01 Fibre Glass Rod 40m B-100-050-01 Fibre Glass Rod 50m ORDERING DETAILS Product No Description B-100-1134-F Flexible End 11mm dia (3 pack) B-100-1135-F Flexible End 14mm dia (3 pack) B-100-1015-F Jointing Ferrule 3mm (3 pack) B-100-1016-F Fixed End M5 3mm (3 pack) B-100-1017-F Pulling Eye 3mm (3 pack)


Cable Pulling Grips Cable Pulling Grips are manufactured from high-grade galvanised steel wire, in a double or single weave construction. Slipped over the outside of the cable when tension is applied the grip contracts applying the pulling the force to the cable. Split grips are available on all models, for example: E-958-0611-SP

ORDERING DETAILS Single Weave/Single Eye Grip Product No Description Length E-958-0611 6 – 13mm Cable P/Grip 300mm E-958-1311 13 – 19mm Cable P/Grip 550mm E-958-1911 19 –25mm Cable P/Grip 600mm E-958-2511 25 – 38mm Cable P/Grip 700mm Single Weave/Double Eye Grip Product No Description Length E-958-0612 6 – 13mm Cable P/Grip 300mm E-958-1312 13 – 19mm Cable P/Grip 550mm E-958-1912 19 –25mm Cable P/Grip 600mm E-958-2512 25 – 38mm Cable P/Grip 700mm Double Weave/Single Eye Grip Product No Description Length E-958-3821 38 – 51mm Cable P/Grip 1000mmE-958-5121 51 – 63mm Cable P/Grip 1300mmE-958-6321 63 – 76mm Cable P/Grip 1300mm Double Weave/Double Eye Grip Product No Description Length E-958-3822 38 – 51mm Cable P/Grip 1000mmE-958-5122 51 – 63mm Cable P/Grip 1300mmE-958-6322 63 – 76mm Cable P/ Grip 1300mm


SECTION 5

Overhead Line Stringing Equipment RUNNING OUT BLOCKS

Aerial Bundle Conductor (ABC) Crossarm Mounted Suspension c/w Safety Hook Insulated Mounted Swivel Sagging

Transmission Line Running Out Blocks Running Out Block – Single Sheave ACCESSORIES Grips for Standard Aluminium and Copper Conductors Aerial Bundle Conductor Clamps Dynamometers Non-Conductive Cable Stockings Heavy/Light Duty Pulling Stockings Swivels and Connectors Pole Platforms – Fixed, Swivelling & Step Ground Anchor & Ground Anchor Set Transformer Bogie

Wire Rope Sling & Tensioning Shoe Sparrholm Pole Raising Sheerings & Pole Bogie Crossarm Lifter & Conductor Lifter ABC Lifter & Hydraulic Pole Hoist

Staywire Dispenser & Cable Measuring Device Spanometer Petrol Driven Drill Pole Climbing Irons

Electronic High Voltage Detectors MG Adaptor Box

Identi Strip Jointers Toolkit 11 & 33 kV


Double Sheave Running Out Block Designed to be strong but light, suitable for pole work. The aluminium sheaves are mounted on sealed ball bearings for low resistance. The webbing ratchet device makes securing to pole very quick and simple. SPECIFICATION Dimensions: 210mm x 200mm x 360mm Weight: 6kg SWL: 600kg Single Offset Sheave Running Out Block This block has the same features as the CBS 687. Single sheave is offset to assist with, fixing conductor to clamp. SPECIFICATION Dimensions: 210mm x 280mm x 330mm Weight: 4kg SWL: 300kg Intermediate Running Out Block Has a split frame and hooks to locate on brackets. The aluminium sheave is mounted on sealed ball bearings. Guide ring protect conductor from damage. SPECIFICATION Dimensions: 110mm x 250mm x 140mm Weight: 2kg SWL: 300kg


D-687 Pole Mounted Double Sheave R/O Block


D-685 Pole Mounted Single Sheave R/O Block

ORDERING DETAILS


D-686 Single Sheave Split R/O Block

AERIAL BUNDLE CONDUCTOR (ABC) RUNNING OUT BLOCKS


Intermediate Running Out Block Has a split frame and hooks to locate on brackets. The aluminium sheave is mounted on sealed ball bearings. Guide ring protect conductor from damage. SPECIFICATION Dimensions: 322mm x 210mm x 130mm Weight: 3.69kg SWL: 350kg Rear Pole Roller Block Suitable for stringing conductors at the rear of a angle pole SPECIFICATION Dimensions: 250mm x 200mm x 300mm Weight: 10kg SWL: 600kg Pole Traversing Block The block allows the stringing operation to be fed up or down poles, when access at the rear of the pole is not available. The block has a 260mm sheave with quick acting ratchet fixing and a conductor side gate. SPECIFICATION Dimensions: 260mm x 260mm x 100mm Weight: 10kg SWL: 600kg

ORDERING DETAILS Product No Description D-973 Single Sheave Split R/O

Block (120mm²)

ORDERING DETAILS Product No Description D-793 Rear Pole Roller Block

ORDERING DETAILS Product No Description D-798 Pole Traversing Block

AERIAL BUNDLE CONDUCTOR (ABC) RUNNING OUT BLOCKS/Cont’d


Crossarm Running Out Block - Straight Designed to mount onto cross arms upto 100mm angle. Sheaves are fitted with sleeve bearings. Unit comes complete with uplift roller to prevent conductor lifting out. SPECIFICATION Outside Diameter: 85mm Groove Width: 25mm Root Diameter: 45mm Weight: 3kg SWL: 350kg Crossarm Running Out Block - Angle Designed to mount onto angle cross arms upto 100mm. Sheaves are fitted with sleeve bearings. This design allows conductors to be strung around route deviations. SPECIFICATION Outside Diameter: 85mm Groove Width: 25mm Root Diameter: 45mm Weight: 4.3kg SWL: 300kg

ORDERING DETAILS Product No Description D-694-2 Crossarm R/O Block - Straight

ORDERING DETAILS Product No Description D-807 Crossarm R/O Block - Angle

CROSS ARM MOUNTED RUNNING OUT BLOCKS


Crossarm R/O Block – Straight The dual pin allows the nylon top roller to be opened from either side when inserting conductor. Suitable for cross arms upto 150mm angle. SPECIFICATION Outside Diameter: 120mm Groove Width: 55mm Root Diameter: 55mm Weight: 3.6kg SWL: 300kg Crossarm Angle Roller The adjustable angle facility allows the sheave to position through 180º in 45º increments. Fits cross arms upto 150mm angle. Nylon roller fitted. SPECIFICATION Outside Diameter: 120mm Groove Width: 55mm Root Diameter: 55mm Weight: 5kg SWL: 400kg Running Out Blocks Suitable for mounting onto cross arms upto 150mm angle, conductor-retaining pin is provided. SPECIFICATION Outside Diameter: 120mm Groove Width: 55mm Root Diameter: 55mm Weight: 4kg SWL: 150Kg

ORDERING DETAILS

Product No Description D-861 Crossarm R/O Block –

Straight

ORDERING DETAILS

Product No Description D-862-1 Crossarm Angle Roller ORDERING DETAILS

Product No Description D-683 Running Out Block

CROSSARM MOUNTED RUNNING OUT BLOCKS/Cont’d

For Further Information Telephone No : +44(0) 1572 723665 • Fax No: +44 (0) 1572 756009 E-mail: [email protected] • Website: www.cbsproducts.com

Suspension Running Out Block The Running Out Block has a swivel hook mounting. SPECIFICATION Outside Diameter: 120mm Groove Width: 55mm Root Diameter: 55mm Weight: 4kg SWL: 50kg Insulator Mounted Running Out Block Suitable for 33kV insulator, has two sheaves for stringing, which are lowered for making off onto insulator. SPECIFICATION Outside Diameter: 455mm x 250mm x 90mm Weight: 4kg SWL: 200kg

ORDERING DETAILS


D-592 Suspension R/O Block 120mm dia

D-592-02 Suspension R/O Block c/w

Safety Hook ORDERING DETAILS

Product No Description D-733 Insulator Mounted R/O Block

– 33Kv D-917 Insulator Mounted R/O Block

– 11Kv


Single sheave aluminium suspension block with spring-loaded safety gate & steel zinc plated side frames. D-691-010 has a swivel oval eye arrangement. D-691-020 has a hole mounting to fit insulated clevis. Neoprene lining of groove is available on request SPECIFICATION Dimensions: 550mm x 300mm x 170mm Outside Diameter: 300mm Groove Width: 45mm Root Diameter: 245mm Weight: 9kg SWL: 1200kg

All our blocks are stamped with Head Load SWL T2. Single sheave aluminium suspension block with spring-loaded safety gate & steel zinc plated side frames. D-700 has a swivel oval eye arrangement. D-702 has a hole mounting to fit insulated clevis. Neoprene lining of groove is available on request SPECIFICATION Dimensions: 703mm x 470mm x200mm Outside Diameter: 470mm Groove Width: 55mm Root Diameter: 385mm Weight: 14kg SWL: 2400kg All our blocks are stamped with Head Load SWL T2.

ORDERING DETAILS Product No Description D-691-010 R/O Block Oval Eye D-691-020 R/O Block Tongue Mounting (Clevis)

ORDERING DETAILS Product No Description D-700-010 R/O Block Rotating Oval Eye D-702-020 R/O Block Tongue Mounting Clevis

Single Sheave Aluminium Suspension Blocks



With an automatic safety gate and steel side frames. SPECIFICATION Outside Diameter: 175mm Groove Width: 65mm Root Diameter: 105mm Weight: 7kg Note: Also available with slip ring for earthwire earthing Swivel Sagging Block Designed to fit tower cross arm to accept wire rope for sagging conductor. SPECIFICATION Maximum Wire Rope Dia: 24mm SWL: D-668-01: 1000kg D-668: 1750kg D-668-02: 2500kg Straight Sagging Block SPECIFICATION Maximum Wire Rope Dia: 16mm SWL: 1000kg Weight: 3kg

ORDERING DETAILS Product No Description D-717 Tandem Aluminium Sheave

R/O Block ORDERING DETAILS Product No Description D-668 Swivel Sagging Block – 1.75t

M20 D-668-01 Swivel Sagging Block – 1t M16 D-668-02 Swivel Sagging Block – 2.5t

M22 ORDERING DETAILS Product No Description D-670 Straight Sagging Block

Tandem Aluminium Sheave Suspension Block


Capable of accommodating the larger conductor, this aluminium suspension block has an automatic safety gate and steel frames. Hole mounted to fit insulator clevis. SPECIFICATION Outside Diameter: 760mm Groove Width: 65mm Root Diameter: 625mm Weight: 24kg SWL: 1200kg With an automatic safety gate and steel side frames. Hole mounting to fit insulator clevis. SPECIFICATION Outside Diameter: 300mm Groove Width: 45mm Root Diameter: 245mm Weight: 7kg SWL: 1200kg

ORDERING DETAILS Product No Description D-736 Running Out Block


D-691 Single Sheave Aluminium Suspension Block

TRANSMISSION LINE RUNNING OUT BLOCKS




Running Out Block – Single Sheave Lightweight Running Out particularly suitable for the railway industry. Fitted with 152mm dia nylon sheave, zinc plated, side frame and snatch gate, also provided with hook and safety catch. SPECIFICATION Length: 400mm Width: 155mm Depth: 80mm Weight: 2.75kg Safe Working Load: 350kg Max Conductor Size: 25mm dia

ORDERING DETAILS Product No Description D-1137 Running Out Block

Single Sheave, 152mm Nylon


The smooth round jaw contour provides maximum contact when used on bare ACSR, aluminium and standard copper conductors. SPECIFICATION The grip is placed over the conductor with a Hotline stick that when removed the latch on the grip closes stopping the grip disengaging from the conductor. SPECIFICATION

ORDERING DETAILS Product No Description D-1656-20-F Grips 5.08 – 10.16mm D-1656-30-F Grips 7.87 – 13.46mm D-1656-40-F Grips 13.46 – 18.80mm D-1656-50-F Grips 18.40 – 21.83mm D-1656-60-F Grips 21.83 – 24.60mm ORDERING DETAILS Product No Description D-1684-5-F Grips 5.54 – 13.97mm D-1684-74-F Grips 5.54 – 13.97mm

Product No Range mm

Max Load kgf

Weight kg

D-1656-20-F 5.08 - 10.16 800 1.36 D-1656-30-F 7.87 – 13.46 900 1.70 D-1656-40-F 13.46 – 18.80 1600 3.40 D-1656-50-F 18.40 – 21.83 1600 3.40 D-1656-60-F 21.83 – 24.60 1600 3.40

Hot Line Grips are available by placing “H” after model number.

Product No Range mm SWL kgf

Weight kg

D-1684-5-F 5.54 – 13.97 1200 2.83 D-1684-74-F * 5.54 – 13.97 1200 2.83

* Curved jaw version to prevent slippage when pulling.

Grips for Standard Aluminium and Copper Conductors

Grip for Extra High Strength Cable & Conductors


Aerial Bundle Conductor Clamps Manufactured from high quality materials, the clamps have been specially designed to suit ABC conductors and provide a wide range per clamp to suit the range of twin and quad bundles. SPECIFICATION Grips for Large Conductors These grips are custom made to individual conductor sizes to ensure maximum contact around the conductor circumference. When ordering specify conductor diameter and name (ie Lynx). SPECIFICATION

ORDERING DETAILS Product No Description D-766 Come Along Clamp 4 x 25-50mm² D-768 Come Along Clamp 4 x 95mm² D-974 Come Along Clamp 4 x 120mm² ORDERING DETAILS Product No Description D-1628-16P-F Grip 7.87 – 22.35mm D-1628-30-F Grip 21.59 – 31.50mm D-1628-40-F Grip 31.50 – 39.12mm

Product No

Conductor Range mm²

SWL kgf

Weight Kg

D-766 4 x 50 4 x 35 4 x 25 2 x 95 2 x 70 2 x 50 2 x 35

600 2.3

D-768 4 x 95 4 x 70

800 4.7

D-974 4 x 120 1000 7.95

Product No Range mm SWL kgf

Weight Kg

D-1628-16-P-F 7.87 – 22.35 2245 7.71 D-1628-30-F 21.59-31.50 4080 12.29 D-1628-40-F 31.50-39.12 7140 15.47


Dynamometer A Dynamometer specially designed for accurate tensioning of overhead line conductors. The units are very compact and light, yet have an easy read dial. The accuracy is ±3% of full scale and they are supplied complete in a heavy-duty leather case. SPECIFICATION PIAB Dynamometer A PIAB Dynamometer is a heavy-duty unit, robust in construction and suitable for conductor tensioning. Supplied in a heavy-duty protective case. SPECIFICATION

ORDERING DETAILS Product No Description D-732-05-F Dynamometer – 500kg D-732-10-F Dynamometer – 1000kg D-732-20-F Dynamometer – 2000kg D-732-30-F Dynamometer – 3000kg D-732-50-F Dynamometer – 5000kg

ORDERING DETAILS Product No Description D-460-05-F Dynamometer – 500kg D-460-10-F Dynamometer – 1000kg D-460-20-F Dynamometer – 2000kg D-460-30-F Dynamometer – 3000kg D-460-50-F Dynamometer – 5000kg D-460-100-F Dynamometer – 10000kg

Capacity Length mm

Diameter Mm

Eye Diameter

mm

Weight

kg 500kgf 110 65 11 0.7 1000kgf 135 65 16 0.8 2000kgf 135 65 16 1.2 3000kgf 150 80 28 2.3 5000kgf 260 95 28 3.5

Capacity Length mm

Diameter Mm

Eye Diameter

mm

Weight

kg 500kgf 266 50 17 1.9 1000kgf 266 50 17 1.9 2000kgf 395 86 33 7.8 3000kgf 395 86 33 7.8 5000kgf 413 122 40 15 10000kgf 495 149 56 26.5


Non-Conductive Cable Stockings Manufactured from a man-made, high strength parallel standard fibre, and having a polyethylene sheath Non-conductive, non-corrosive and abrasive resistant Prevents damage to other components during the pulling operation As a support grip, long life is ensured even in hostile environments Single Weave Double Weave To ensure maximum grip during pulling of cables the end of the stockings should be bound over the tail for 50mm with PVC tape. Grip Length – 600mm Special designs, constructions are available to customer’s specifications.

Dia Range mm

Minimum Breaking

Strength kg

Product No

Single Eye

Product No

Double Eye 10 - 20 1,120 E-677-1011 E-677-1012 20 – 30 1,680 E-677-2011 E-677-2012 30 – 40 2,240 E-677-3011 E-677-3012 40 – 50 2,688 E-677-4011 E-677-4012

Dia Range mm

Minimum Breaking

Strength kg

Product No

Single Eye

Product No

Double Eye 30 – 40 4,480 E-677-3021 E-677-3022 40 – 50 5,376 E-677-4021 E-677-4022 50 – 65 7,168 E-677-5021 E-677-5022 65 – 80 7,168 E-677-6521 E-677-6522 80 – 100 7,168 E-677-8021 E-677-8022

AERIAL BUNDLE CONDUCTOR (ABC) FOR INSULATED CABLE


Heavy Duty Pulling Stockings Triple Weave, Single Eye, Pulling Stockings Flexible Eye with Shoulders – Heavy Duty Jointing Grips, Triple Weave, Pulling Stockings with Connecting Bond – Heavy Duty Light Duty Pulling Stocking Single Weave, Single Eye, Pulling Stockings Flexible Eye – Light Duty

Dia Range mm

Minimum Breaking

Strength kg

Grip Length

mm

Product No

6 – 13 2,250 650 E-858-0631 12 – 19 3,380 825 E-858-1231 19 –25 5,540 1,025 E-858-1931 25 - 32 9,550 1,300 E-858-2531 32 – 38 11,456 1,400 E-858-3231 38 –48 11,456 1,400 E-858-3831

STRENGTHENED 16 – 24 9,750 1,100 E-858-S-1631 19 – 25 13,500 1,100 E-858-S-1931 25 - 32 15,000 1,400 E-858-S-2531

Dia Range mm

Minimum Breaking

Strength kg

Grip Length

mm

Product No

6 – 13 2,250 650 E-859-0630 12 – 19 3,380 825 E-859-1230 19 –25 5,540 1,025 E-859-1930 25 - 32 9,550 1,300 E-859-2530 32 – 38 11,456 1,400 E-859-3230 38 –48 11,456 1,400 E-859-3830

Dia Range mm

Minimum Breaking

Strength kg

Grip Length

mm

Product No

6 – 10 195 110 E-860-0611 10 – 13 350 175 E-860-1011 13 – 16 567 200 E-860-1311 16 – 19 814 230 E-860-1611 19 – 25 1,172 250 E-860-1911 25 – 32 1,848 290 E-860-2511


Swivels and Connectors Swivels are essential for effective pulling operations of underground cables and overhead conductors. The swivels are fitted with bearings to prevent build up of twist in the cable pulling bond. CBS swivels are precision manufactured in high-grade steel with a plated finish. The safe working loads are based on a factor of safety of 3:1. SPECIFICATION Fused Swivels Fused swivels are used in applications where the pulling force must not be exceeded. The fuses are replaceable and allow the swivel to break when then maximum applied load equals the rating of the fuse. Rope Connectors Rope Connectors provide as an effective method of jointing pulling grips

ORDERING DETAILS

Product No Description D-516 Swivel 800kgf D-565 Swivel 1600kgf D-564 Swivel 3500kgf

D-801 Swivel 4500kgf


D-566-01-F Fused Swivel Body 22mm D-566-02-F Shear Pin 3kN 10 Pack – Blue D-566-03-F Shear Pin 2kN 10 Pack – Brass D-566-04-F Shear Pin 4kN 10 Pack – Silver D-566-08-F Shear Pin 8kN 10 Pack - Black

ORDERING DETAILS

Product No Description D-956 Rope Connector – 500kg D-1043 Rope Connector – 1000kg D-1169 Connector – 3500kg

D-802 Connector – 4500kg D-1164 Connector – 6000kg

Product No

SWL Dia (mm)

Length (mm)

Jaw Opening

Pin Dia mm

Weight kg

D-516 800kgf 26 105 10 8 0.26 D-565 1600kgf 34 108 15 10 0.55 D-564 3500kgf 37 135 15 12.7 0.75 D-801 4500kgf 40 142 15 14 0.85



Insulated Connector Assembly D-1082 Connector Assemblies are provided as an effective method of joining two cable pulling grips together when pulling O/H conductors. This Insulated Connector, designed to meet ‘National Grid Specifications’ has been designed to insulate the joined Pulling Grips to stop the transfer of Induced Currents travelling along the length of conductor. SPECIFICATION Overall Length: 192mm Centres: 160mm Jaw Width: 15.25mm Pin Diameter: 14mm Weight: 1.3kg SWL: 4500kg

ORDERING DETAILS Product No. Description D-1082-001 Insulated Connected Assembly


Pole Platforms CBS Aluminium Pole Platforms for varying situations. All models feature a serrated pole-gripping device and are light in weight and simple to apply. Manufactured in tubular aluminium, incorporating a non-slip open plate platform. Platforms have a safe working load of 250kg. Pole Step has safe working load of 150kg. SPECIFICATION CBS Aluminium Pole Platforms for varying situations. All models feature a serrated pole gripping device and are light in weight and simple to apply. Manufactured in tubular aluminium, incorporating a non-slip open plate platform. Platforms have a safe working load of 250kg. SPECIFICATION

Picture shown is the D-899 – Fixed Platform

Length (m) 1.0m 1.5m 2.0m Product No Weight

D-899-10 23kg

D-899-15 27kg

D-899-20 30kg

Product No Weight

D-900-10 27kg

D-900-15 30kg

D-900-20 35kg

Product No Weight

D-901 18kg

Note: D-889 – Fixed, D-900 – Swivelling & D-901 – Pole Step

Picture shown is the D-901 – Pole Step

Swivel Pole Platform To suit crossarms to ESI 43/40

Length (m) 1.5m 2.0m Product No Weight

D-900-15-1 30kg

D-900-20-1 40kg

Length 1700mm 2260mm Width 510mm 600mm Height 920mm 940mm


Ground Anchor The screw type ground anchor provides secure anchorage points when operating on site. Manufactured in high quality steel to provide safe and firm location points when pulling and holding. SPECIFICATION Ground Anchor Set A sturdy ground anchor designed for use where near horizontal loads are being applied. Fixed by the insertion of an eight-pin removal tool provided. 3000kg SWL. SPECIFICATION Shipping Weight: 62kg

ORDERING DETAILS Product No Description D-457-06-F Screw Anchor – 150mm D-457-08-F Screw Anchor – 200mm D-457-10-F Screw Anchor – 250mm D-457-12-F Screw Anchor – 300mm

ORDERING DETAILS

Product No Description D-804 Ground Anchor Set

Product No Disc Dia mm

Shaft Dia mm

Dia Mm

Weight Kg

D-457-06-F 150 20 750 2.7 D-457-08-F 200 25 1200 6.8 D-457-10-F 250 28 1500 12.2 D-457-12-F 300 35 1675 19.0


D-483 Wire Rope Sling Wire rope sling for lifting and tensioning applications. Manufactured from high-grade galvanised steel, soft eye loops each end. SPECIFICATION Capacity: 500kg, 1000kg, 2000kg,

3000kg, 4000kg & 5000kg Length: 1m, 2m, 3m & 5m Tensioning Shoe Special purpose device to meet Electricity Board Standards. Fits at end of insulator set when sagging and making off dead ends on wood pole lines. 2000kg SWL. SPECIFICATION Shipping Weight: 2kg Length: 355mm Width: 105mm Height: 120mm

ORDERING EXAMPLE When ordering the Wire Rope Slings your need the following:- Model: D-483 Capacity: 500kg Length: 1m Example: D-483-05-1-F (500kg, 1m Sling) ORDERING DETAILS Product No Description D-325 Tensioning Shoe D-822 Tensioning Shoe


Sparrholm Pole Raising Sheerlegs Lightweight aluminium legs with hand winch and pole chains makes for safe erection of wooden poles. SPECIFICATION D-187-F D-188-F Pole Length: 12m 14m Overall Length: 5m 6m Wire Rope Length: 26m 32m Safe Working Load: 350kg 350kg Pole Erecting Pikes Wooden poles can be safely erected with two men deploying these lightweight pole pikes. Manufactured in aluminium tube with double pole spikes, push up handle and ground spike. Usually supplied in pairs of 3 or 4 varying lengths per set. Lengths to suit customer’s requirements. SPECIFICATION Length: 2m 3m 4m 5m 6m Weight: 8kg 9kg 11kg 14kg 16.5kg

ORDERING DETAILS

Product No Description D-187-F Sheerleg – 12m D-191 Spare Ropes

D-188-F Sheerleg – 14m D-192 Spare Ropes

ORDERING DETAILS

Product No Description D-498-20 Pole Erecting Pike – 2m D-498-30 Pole Erecting Pike – 3m D-498-40 Pole Erecting Pike – 4m D-498-50 Pole Erecting Pike – 5m D-498-60 Pole Erecting Pike – 6m


D-710 Pole Bogie – Standard Tyres

D-710-8 Pole Bogie – 500mm Wide

D-710 Pole Bogie (LP Tyres) This pole bogie is fitted with low-pressure tyres to reduce land damage to a minimum. Ideally suited for transporting poles across rough terrain or soft ground. The poles are secured with quick action retaining straps. Also available is the towing eye and strap for towing by vehicles, and narrow versions for when restricted access is required. SPECIFICATION – D-710-1 Length: 1200mm Width: 1260mm Height: 560mm Weight: 70kg SPECIFICATION – D-710 Length: 1200mm Width: 1075mm Height: 560mm Weight: 70kg SPECIFICATION – D-710-8 Length: 1200mm Width: 500mm Height: 560mm Weight: 34kg

ORDERING DETAILS

Product No Description D-710-1 Pole Bogie (LP Type) D-710 Pole Bogie (STD Tyre) D-710-8 Pole Bogie (500mm Wide) D-710-2 Towing Eye & Strap


Transformer Bogie The CBS Transformer Bogie has been designed to manually move transformers over short distances from one location to another by one operator. The sturdy lightweight all steel construction frame incorporates a detachable lifting bracket that can be fitted to any one of four positions to best suit the transformer being moved. Wide pneumatic wheels with ball bearing hubs are fitted to aid travelling especially when on soft terrain. The operator selects the best position for the lifting bracket, and then manoeuvres the transformer bogie into position to locate the lifting hook into the lifting bracket on the transformer, by pulling back on the handle the transformer is lifted clear of the ground, it can be moved to the new location. SPECIFICATION Capacity: 400kg (Vertical load on Lifting hook)

(The actual load that can be lifted is dependent on the size of the transformer, its weight and the size and physical strength of the operator)

Chassis: All steel welded construction OVERALL DIMENSIONS Length: 600 mm Width: 890 mm Height: 2060 mm (max.) Weight: 50 kg

ORDERING DETAILS Product No Description D-1166 Transformer Bogie


Crossarm Lifter This lightweight Aluminium Crossarm Lifter is ideal for raising even the largest crossarms to ESI 4340 to the top of any pole. The lifter, which has a safe weight lift of 100kg, rests on the pole top and is strapped in position with a liberally rated chain plus toggle screw. The Sheave is securely caged to prevent the lifting rope escaping while in action. SPECIFICATION Weight: 13.18kg Conductor Lifter Designed to be attached to a cross arm to lift bare conductors out to the insulated pots which then allows the pot to be changed. SPECIFICATION Weight: 10.90kg

ORDERING DETAILS Product No Description D-929-01 Crossarm Lifter ORDERING DETAILS Product No Description D-1044 -001 Conductor Lifter


ABC Conductor Lifter Designed to be attached to a pole to lift the ABC Conductor out of the running out blocks. The ABC Conductor is then attached to the pole. SPECIFICATION Weight: 8.5kg Hydraulic Pole Hoist The Hydraulic Pole Hoist is designed to raise damaged or rotten wooden poles from the ground. It employs a hydraulic ram, to provide the lifting effort, which is attached to the pole by the strong link chain. The sturdy manually operated hydraulic pump powers the ram, which is simply connected by quick-release connectors. The pump is mounted on an aluminium base, and the cylinder has a load spreading “I” beam base with handle. SPECIFICATION Maximum Lifting Force: 8000kg CONSISTING OF THREE ASEMBLIES 1 – Cylinder assembly 2 – Pump and foot assembly 3 – Ground frame assembly Total weight: 102 kg

ORDERING DETAILS


D-972 Conductor Lifter

ORDERING DETAILS

Product No Description D-980 Hydraulic Pole Hoist


Staywire Dispenser An essential aid for handling staywire coils, robustly constructed in steel tube having a plated finish. Removable side arm for ease of loading, automatically feeds wire as drawn off by operator. SPECIFICATION Dimensions: 950mm x 410mm Weight: 8kg Cable Measuring Device Designed to work in conjuction with the Roll on Drum Stand (D-496), the cable-measuring device offers a practical solution to accurate cable measuring. Mounted on wheels for ease of transporting the device can accommodate cables from 20mm to 50mm diameter. SPECIFICATION Height: 1000mm Width: 300mm Length: 400mm Weight: 8kg

ORDERING DETAILS Product No Description D-837-01 Staywire Dispenser ORDERING DETAILS Product No Description D-557 Cable Measuring Device


Spanometer – Overhead Cable/Rope Measuring Machine This machine has been designed to measure lengths of overhead cables. The unit is hung on the cable and a vertically movable pulley is used to clamp the measuring wheel to the cable. A shackle is provided to enable the machine to be pulled along. A mechanical counter then displays the length/distance that the machine has moved. Its primary use is for positioning of spacers on overhead power lines. Can accommodate cable sizes between 8 – 43mm diameters.

ORDERING DETAILS Product No Description D-557-4-F Overhead Cable/Rope

Measuring Device


Petrol Driven Auger Drill – STIHL BT45 A high quality tool for drilling wooden poles on site. Petrol powered, this sturdy drill makes light work of boring holes in all sizes of pole. The STIHL BT45 is powered by the same two-stroke mixture as chainsaws. A highly effective anti -vibration system and non-slip handles ensure safe and comfortable operation. Drill Quick Release chuck for drills with shank diameter upto 13mm Planting Auger Adaptor for mounting planting hole drills and a second handle for ergonomically correct use of the machine as an earth auger. Drill Bits Wood Drills (dia mm) upto 25. Planting hole drills (dia inches) 3, 4 & 5. SPECIFICATION Displacement: 27.2cm³ Power Output: 0.75kW Weight: 4.8kg Spare Auger Bits

ORDERING DETAILS Product No Description D-779-100-F Petrol Driven Auger Drill OPTIONAL EXTRA Product No Description D-779-1-F Wooden Case D-779-13-F Auger Bit for Wood 13x300mm D-779-14-F Auger Bit for Wood 14x300mm D-779-16-F Auger Bit for Wood 16x450mm D-779-18-F Auger Bit for Wood 17.5x450mm D-779-19-F Auger Bit for Wood 19x450mm D-779-22-F Auger Bit for Wood 22x450mm D-779-25-F Auger Bit for Wood 25x450mm


Petrol Driven Drill – TED 262L A must for drilling wooden poles on site. Petrol powered, this sturdy drill makes light work of boring holes in poles. Lightweight and able to be used in any position, the fuel lasts for around 50 minutes running time. Fitted with ½ inch chuck. A full range of wood augers available on request. SPECIFICATION Weight: 4kg Spare Auger Bits


D-779-F Petrol Auger Driven Drill

OPTIONAL EXTRA


D-779-1-F Wooden Case D-779-13-F Auger Bit for Wood 13x300mm D-779-14-F Auger Bit for Wood 14x300mm D-779-16-F Auger Bit for Wood 16x450mm D-779-18-F Auger Bit for Wood 17.5x450mm D-779-19-F Auger Bit for Wood 19x450mm D-779-22-F Auger Bit for Wood 22x450mm D-779-25-F Auger Bit for Wood 25x450mm


Pole Climbing Irons Spur type adjustable climbers; make easy work of pole climbing. Comfort pads, and calf and ankle straps, replacement gaffs. A complete range of spare parts and sharpening equipment is available.

• UK Industry standard climbers • High quality forged steel gaffs • Comfortable padded leather calf pads • Adjustable length • Gaffs can be re-sharpened • Gauges and sharpening tools available

SPECIFICATION Weight: 2.78kg

ORDERING DETAILS Product No Description D-443-F Pole Climbing Iron OPTIONAL EXTRAS Product No Description D-443-1-F Comfort Pads D-443-2-F Calf Strap D-443-3-F Replacement Gaffs D-443-4-F Ankle Strap D-443-5-F Gaff Gauge D-443-7-F Gaff Sharpening Kit


Electronic High Voltage Detectors 6.6 – 33kV Switchable Long Probe These well-proven warning devices have been in service throughout the industry for many years. The unit comes complete with a forked probe and adaptor suitable for use with P331 type pole head and uses the standard red and green LED warning displays. The visual warning can be supplemented with an aural one by incorporating the “ACU” acoustic warning unit. The “ACU” unit can also be used with existing detectors have a serial number prefixed with an “M”.

ORDERING DETAILS Product No Description K-364-347-002-F Voltage Detectors 6.6 –

33kV Switchable Long Probe (KP USE)

K-620-425-001-F Spare Fork Tip for Voltage

Detector OPTIONAL EXTRAS Product No Description K-05017-01-F Voltage Detector Carrying

Case - Large K-05019-F Adaptor/Nylon Bayonet for

P331 Type Pole Head D-850-F Pole head Type P331 K-611-009-009-F Adaptor/Nylon Bayonet for

KP Type Ins Pole Head K-360-882-882-1 KP Type Ins Pole Head D-851-F Top Operating Pole 1.22m D-852-F Middle Operating Pole 1.22m D-853-F Bottom Operating Pole 1.22m K-364-746-002-F Acoustic Unit


Electronic High Voltage Detectors 6.6 – 33kV Short Probe These well-proven warning devices have been in service throughout the industry for many years. The unit comes complete with a forked probe and adaptor suitable for use with P331 type pole head and uses the standard red and green LED warning displays. The visual warning can be supplemented with an aural one by incorporating the “ACU” acoustic warning unit. The “ACU” unit can also be used with existing detectors have a serial number prefixed with an “M”.

ORDERING DETAILS Product No Description K-364-046-001-F Voltage Detectors 6.6 –

33kV c/w Forked Probe Short Probe 170mm (KP1.2)

OPTIONAL EXTRAS Product No Description K-05016-F Voltage Detector Carrying

Case - Small K-05019-F Adaptor/Nylon Bayonet for



For Further Information Telephone No: +44(0) 1572 723665 • Fax No : +44 (0) 1572 756009 E-mail: [email protected] • Website: www.cbsproducts.com

Electronic High Voltage Detectors 132kV Long Probe These well-proven warning devices have been in service throughout the industry for many years. The unit comes complete with a forked probe and adaptor suitable for use with P331 type pole head and uses the standard red and green LED warning displays. The visual warning can be supplemented with an aural one by incorporating the “ACU” acoustic warning unit. The “ACU” unit can also be used with existing detectors have a serial number prefixed with an “M”.

ORDERING DETAILS Product No Description K-620-035-003-F Voltage Detectors 132kV OPTIONAL EXTRAS Product No Description K-05017-01-F Voltage Detector Carrying

Case – Large K-624-413-001-F Adaptor for 132kV Detector K-360-882-882-1 KP Type Ins Pole Head D-851-F Top Operating Pole 1.22m D-852-F Middle Operating Pole 1.22m D-853-F Bottom Operating Pole 1.22m K-364-746-002-F Acoustic Unit


Electronic High Voltage Detectors 11 – 66Kv Short Probe These well-proven warning devices have been in service throughout the industry for many years. The unit comes complete with a forked probe and adaptor suitable for use with P331 type pole head and uses the standard red and green LED warning displays. The visual warning can be supplemented with an aural one by incorporating the “ACU” acoustic warning unit. The “ACU” unit can also be used with existing detectors have a serial number prefixed with an “M”.

ORDERING DETAILS Product No Description K-364-046-002-F Voltage Detectors 11 – 66kV

c/w Forked Probe Short Probe 170mm (KP 1.4) OPTIONAL EXTRAS Product No Description K-05016-F Voltage Detector Carrying

Case - Small K-05019-F Adaptor/Nylon Bayonet for




MG Adaptor Box The MG Adaptor box is used in conjunction with the Pfisterer Electronic phase comparator No-K-827-189-007-F This adaptor box is used only when the phase testing of Schneider switch gear is required.

ORDERING DETAILS Product No Description D-967 Adaptor Box 1.4 amps max (2 x req for phase testing) 100 V max


Identi-Strip Marking System Identi-Strip requires no special tools. It is highly visible with black characters on a yellow background. The characters slot into the black strip to create unique labels. Identi-Strip is particularly suited for labelling wooden poles, which are predominantly used in Electricity Industry. The system is made entirely of plastic, which is specially treated to prevent UV deteriorations.


Jointer’s Tool Kit 33kV A comprehensive range of tools and equipment to meet the needs of the cable jointer. Provided in a sturdy wooden chest, with lift out tool tray. A complete contents list available on request. Jointer’s Tool Kit 11kV A smaller kit suited to 11kV jointing prepared to UK Board requirements. Provided in a sturdy wooden chest, with lift out tool tray and carrying handles. A complete contents list available on request. Special tool kits can be prepared to meet consultants, custo mers or contractors requirements, both for cable jointing or linesman’s tool kits.

ORDERING DETAILS Product No Description D-435-F Jointer’s Tool Kit – 33kV D-436-F Jointer’s Tool Kit – 11kV

Al Konschak

discontinued cbs


SECTION 6

Tooling & Auxiliary Equipment RIDGID ACSR Cable Trimmer Podger Ratchet, Ratchet Wrenches & Extension Sockets Ratchet Cutters – Heavy Duty Cable Croppers Hydraulic Cutters & Ratchets Lever Hoist & Ratchet Lever Hoist Mini Ratchet Puller & Insulated Web Strap Rope Hoist (Tirfor & Yale) Canvas Buckets Safety Belts & Harnesses Tree Pruning Head, Pruning Saw & Tree Hook Hydraulic Breaker & Accessories & Hydraulic Power Pack Jointers Utilitent


RIDGID ACSR Cable Trimmer

• Fast, accurate cable splice preparation.

• The bushing holder, cutter and handy

carrying case are sold as one unit.

• Case contains storage sockets for 11 bushings.

Weight: 2.8kg RIDGID Bushings

ORDERING DETAILS Product No Description D-914-RIDGID-87-F ACSR Cable Trimmer D-914-RIDGID-87-01-F Ridgid Cutter Wheel -

No 87 ORDERING DETAILS Product No Description D-914-RIDGID-HORSE Bushing–Horse–70mm² D-914-RIDGID-LYNX Bushing-Lynx-175mm² D-914-RIDGID-ZEBRA Bushing-Zebra-

400mm²


Podger Ratchet – Double Ideal tools for linesmen, ratchet facility in both directions, two sizes per wrench. Sizes from 10 x 14 x 41 x 46mm A/F. SPECIFICATION

Product No Across Flats (mm)

Bolt Size

D-257-1014-F 10 x 14 M6 x M8 (5/16) D-257-1113-F 10 X 13 ¼W x 5/16 W D-257-1317-F 13 x 17 M8 x M10 D-257-1719-F 17 x 19 M10 x M12 D-257-1921-F 19 x 21 7/16W x ½W D-257-1924-F 19 x 24 M12 x M16 D-257-2126-F 21 x 26 ½W x 5/8 W D-257-2430-F 24 x 30 M16 x M20 D-257-2632-F 26 x 32 5/8 W x M22 D-257-3032-F 30 x 32 M20 x M22 D-257-3235-F 32 x 35 ¾W x 7/8 W D-257-3236-F 32 x 36 M22 x M24 D-257-3541-F 35 x 41 7/8 W x 1 W D-257-3641-F 36 x 41 M24 x M27 D-257-4146-F 41 x 46 M27 x M30

Ratchet Spanner – Double A universal tool, ratchet facility in both directions, two sizes per wrench. Sizes from 13 x 17 to 30 x 32mm A/F SPECIFICATION

Product No Across Flats (mm)

Bolt Size

D-258-1317-F 13 x 17 M8 x M10 D-258-1719-F 17 x 19 M10 x M12 D-258-1921-F 19 x 21 7/16W x ½W D-258-2126-F 21 x 26 ½W x 5/8W D-258-2224-F 22 x 24 M14 x M16 D-258-2427-F 24 x 27 M16 x M18 D-258-2430-F 24 x 30 M16 x M20 D-258-3032-F 30 x 32 M20 x M22

Extension Sockets SPECIFICATION Product No Across Flats

(mm) D-259-17-F 17 D-259-19-F 19 D-259-21-F 21 D-259-22-F 22 D-259-24-F 24 D-259-26-F 26 D-259-27-F 27 D-259-30-F 30 D-259-32-F 32 D-259-36-F 36


Ratchet Cutters Designed for cutting ACSR Conductors upto 23mm diameter.

• Extra Heavy-duty blade design with alignment bar.

• PVC fibreglass handles with vinyl grips.

• Convenient operation feature allows fast or

slow opening closing of handles. Rugged, compact. Lightweight design.

• Blades made from 6150-alloy steel.

SPECIFICATION Length: 457mm Weight: 1.81kgs Ratchet Cutter – Quick Release Quick action Ratchet Cutters designed for use on Copper & Aluminium cables. (Not for Steel)

• Precision ground alloy steel blade

• PVC fibreglass handles with vinyl grip (100kV/ft dielectric strength)

• Convenient operation feature allows fast or

slow opening/closing of handles.

• Rugged, compact, lightweight design. SPECIFICATION Length: 457mm Weight: 1.9kgs

ORDERING DETAILS Product No Description G-GMP-75248 Ratchet Cutter Heavy Duty ORDERING DETAILS Product No Description G-GMP-75249 Ratchet Cutter –

Quick Release


Cable Croppers Designed for cutting Copper & Aluminium Cables (not suitable for steel or ACSR).

• Precision ground hardened steel blades to cut cables upto 20mm diameter.

• Contoured handles with non-slip plastic

covering. SPECIFICATION Length: 220mm Weight: 0.28kgs Cable Croppers for Aluminium and Copper Designed for cutting Copper & Aluminium cable (not suitable for steel or ACSR) Hook type blades for easy non-slip cutting. Fibreglass handles with non-slip grips. SPECIFICATION Maximum Cable Dia: 32mm Length: 533mm Weight: 1.5kg Cable Croppers Designed for cutting Copper & Aluminium cable (not suitable for steel or ACSR). Hook type blades for easy non-slip cutting. Fibreglass handles with non-slip grips. SPECIFICATION Maximum Cable Dia: 50mm Length: 813mm Weight: 4kg

ORDERING DETAILS Product No Description G-GMP-15304 Cable Croppers ORDERING DETAILS Product No Description G-GMP-75246 Cable Croppers for

Aluminium and Copper -32mm

ORDERING DETAILS Product No Description G-GMP-75247 Cable Croppers for

Aluminium and Copper – 50mm


Hydraulic Cutter Hand operated hydraulic cutters, designed to increase speed and reduce effort of cutting conductors and cables whilst providing a superior finish. Models D-805-04-F & D-805-05-F are two-speed for faster operation. SPECIFICATION Ratchet Cutter These compact hand cutters multiply the power available through a ratchet action to provide a steady clean out. SPECIFICATION

Maximum Cutting Diameter (mm) Product No Al/Cu Cable D-806-32-F 32 D-806-45-F 45

Conductor Cutter (ACSR) This scissor action cutter is simple and trouble free in operation, yet is capable of cutting through steel rope and ACSR conductors. SPECIFICATION Product

No Steel Rope

ACSR Conductor

Length mm

Weigh Kg

D-809-F Ø14mm Ø17mm 780 3.0

Maximum Cutting Diameter (mm) Product No Cu/Al

Cable Cu/ACSR Conductor

Steel Rope mm

Weight Kg

D-805-025-F 24 24 16 2.7 D-805-04-F 40 35 16 6.3 D-805-05-F 50 - - 3.6

D-805-085-F 85 - - 6.5


TENSIONING & LIFTING EQUIPMENT Lever Hoist Elephant Lever Operated Hoist for lifting and pulling in all directions. Quick and easy to handle. SPECIFICATION Ratchet Lever Hoist Yale Ratchet Lever Hoist PT – ideal for applications where economical value is a decisive factor. Featuring low handle pull, compact design and high strength. SPECIFICATION Product No Capacity

Kgf Lift mm

Weight Kg

D-840-07-F 800 1500 5.7 D-840-15-F 1600 1500 9.3 D-840-30-F 3200 1500 14.9 D-840-60-F 6300 1500 28.5

Product No Capacity Kgf

Lift mm

Chain Diameter

mm

Weight Kg

D-854-02-F 250 1000 4 2.0 D-854-05-F 500 1500 5 3.6 D-854-08-F 800 1500 5.6 6.2 D-854-16-F 1600 1500 7.2 9.5 D-854-31-F 3150 1500 9.0 15.5 D-854-63-F 6300 1500 9.0 x 2 26.5


Mini Ratchet Puller Specially designed and developed to meet the specific needs of linesmen for tensioning applications. The units are compact and lightweight, easy to operate in any position and feature a ratchet and automatic brake for secure tensioning. SPECIFICATION Insulated Web Strap (Mini Ratchet Puller) SPECIFICATION

ORDERING DETAILS Product No Description D-785-10-F M/Ratchet – 1000kg D-785-15-F M/Ratchet – 1500kg

ORDERING DETAILS Product No Description D-785-10-WS-F M/Ratchet – 1000kg D-785-15-WS-F M/Ratchet – 1500kg

Capacity Kgf

Wire Dia

Number of

Wires

Min Length mm

Max Length mm

Weight Kg

1000 5 2 410 1210 3.15 1500 6.3 2 450 1220 4.3

Capacity Kgf

Strap Size mm

Min Length mm

Max Length mm

Weight Kg

1000 2 x 33 440 1940 3.3

1500 2 x 40 470 1970 4.6


Rope Hoist (Tirfor) Ideal lifting and pulling device where long strokes are required. 20m of rope supplied as standard, longer ropes available on request. The T-500 Range are available on request. SPECIFICATION

Lifting Capacity

Kg

Pulling Capacity

Kgf

Rope Diameter

mm 800 1250 8.4 1600 2500 11.5 3200 5000 16.0

Yaletrac Cable Pullers Yaletrac® cable pullers feature a lightweight, compact, high strength aluminium housing, smooth contour design with a large, flat bottom surface for increased stability in horizontal and vertical working positions.

Forward and reversing levers in tandem provide slim design and assure power transfer along the centre line. Overload protection is by a shearing pin in the forward lever. Spare shear pins are conveniently located in the carrying handle or operating lever. A broken pin can be replaced without removing the load.

A lever disengages the rope clamp system allowing easy, smooth installation of the wire rope.

Yaletrac® uses a special flexible wire rope. It has six strands with a steel core and is identified by an orange strand. The rope is tapered at one end for easy threading and fitted with a safety hook on the other end.

SPECIFICATION Lifting Capacity Kg Rope Diameter mm

800 8.4 1600 11.5 3200 16.0

ORDERING DETAILS Product No Description D-477-08T-F Tirfor 800 Kg D-477-16T-F Tirfor 1600 Kg D-477-32T-F Tirfor 3200 Kg

ORDERING DETAILS Product No Description D-477-08Y-F Yaletrac – 800kg D-477-16Y-F Yaletrac – 1600kg D-477-32Y-F Yaletrac – 3200kg


Canvas Buckets Used to transport tools from the ground to an aerial perch, each of these 12in high heavy canvas buckets has a tough vulcanised rubber bottom and reinforced steel ring mouth to give you years of heavy-duty use. Spanning the mouth of each bucket is rope handle, which runs between two grommets riveted to opposite sides of the bucket. The rope is long enough so that it won’t get in your way if you have to move large or heavy objects in and out of the bucket. A solid brass snap swivel on the rope lets you attach it to any secure strand or handline.

ORDERING DETAILS Product No Description G-GMP-66731-F 12in Canvas Bucket – No

Pocket - Weight – 1.4kg G-GMP-66732-F 12in Canvas Bucket with 15

small stitched-in pouches - Weight – 1.4kg G-GMP-66739-F 9in Canvas Bucket with

Single Outside Pocket - Weight – 1.4kg


Safety Belts and Harnesses The work-positioning belt is intended for the use of linesmen and other workers required working at heights on poles or other structures in a supported position thereby enabling them to have both hands free for working. (They are not intended for fall arrest) A D-415-F may also be integrated with a full body harness, giving full fall arrest protection combined with a work positioning facility. The D-415-F is manufactured from strong durable polyester webbing and is fitted with a wide back support. A fully adjustable body belt and pole strap makes it easy for the wearer to obtain a comfortable fit and at the same time to able to achieve the correct working position required.

ORDERING DETAILS Product No Description D-415-F Working Positioning Belt D-416-F Work Positioning Belt

integrated with a full body harness

D-415-F

D-416-F


Tree Pruning Head The Tree Pruning Head is ideal for tree clearing near overhead power lines. It is suitable for fitment upon a standard operating pole top section, by use of an aluminium adaptor for rigid location when cutting. The spring loaded side action-cutting blade is able to cut branches up to 1.75” (44mm) diameter. Operation is facilitated by a 2-metre chain and 9 metre operating rope, which is fitted to the blade-operating lever, for ease of use from ground level. Weight: 1.6kg Pruning Saw Head The branch-cutting saw is suitable for fitment to standard intermediate pole sections with oval joint button. The curved 6-tpi blade facilitates a cutting action on both forward and backward strokes, which greatly reduces the effort required when compared to a conventional saw blade. The blade is 14” (355mm) long and manufactured from stainless steel and lacquered to ensure a long service life. The blade is bonded and riveted into the pole head to provide sure location during use. The blade is profiled at either end, to prevent the branch being cut, from slipping from the blade whilst cutting action is taking place. Weight: 0.32kg Tree Hook Helps with the handling of branches when used with the saws or pruning heads Complete with adapter to fit glass fibre rods Weight: 0.5kg

ORDERING DETAILS Product No Description D-845-F Tree Pruner D-845-3-F Rope Insulator ORDERING DETAILS Product No Description D-845-1-F Pruning Saw D-845-2 Top Pole Adapter

ORDERING DETAILS Product No Description D-845-4-F Tree Hook


Hydraulic Breaker & Accessories Handheld breakers can be used for light or heavy -duty concrete demolition, post driving and asphalt cutting. The Breakers features a feathering valve, making start-up and initial placement of the steel easy and comes with anti-vibration handles, which reduce operator fatigue.

• Highly productive in utility construction, street maintenance and repair of water & gas mains.

• Ideal for street & bridge maintenance, building renovation & heavy -duty driving.

• High alloy accessories for increased strength & durability.

• Available in asphalt cutter, asphalt wedge, clay spade, moil point & drive rod set.

SPECIFICATION Features: Vibro Damped Chuck Size: 32 x 160 Weight: 32 kg Hand arm vib figures: 7.5m/2s L x W x H (cm): 68 x 40 x 11 Flow Range (Lpm): 26-34 Pressure (Bar): 90-150 Blows Per Min: 1300 Ft-lbs per Blow: 65 Hydraulic Power Pack Hydraulic Power Pack with 13hp dependable Honda Petrol Engine. Mounted in a steel protection frame, easily transported over rugged terrain. Designed for heavy-duty service and for continuous use applications and can operate a much wider range of tools. Fitted with power on demand, on/off control value and detachable 7m, dual hoses. SPECIFICATION Engine: Honda GX390 Engine Power: 13hp Fuel: Petrol (Unleaded) Flow & Pressure: 30 LPM @ 150 bar L X W X H (cm): 72 x 55 x 61 Weight: 83kg Noise Level (LWA): 107 Hoses: 7m x 13mm EHTMA Category: D Engine Oil Cap: 1.1 Litres Hydraulic Oil Cap: 3.8 Litres

(B) (C) (A) (D) (E)

ORDERING DETAILS Product No Description G-BR67-01-01-F Hydraulic Breaker OPTIONAL EXTRAS Product No Description G-BR67-02-F Drive Rod Set SGC14 c/w Bag G-BR67-03-F Moil Point 14in (A) G-BR67-04-F Asphalt Cutter 5in

Blade x 11in (B) G-BR67-05-F Asphalt Wedge (C) G-BR67-06-F Chisel 3in x 14in (D) G-BR67-07-F Clay Spade 5½in Blade (E) ORDERING DETAILS Product No Description C-826-HP90-F Hydraulic Power Pack

c/w 7m hoses

Al Konschak

discontinued cbs


Jointer’s Utilitent Designed to protect workers from the elements, these brightly coloured tents are easily seen by oncoming traffic. Utilising a unique new hub design, the tent ops up or down in a matter of seconds and requires no assembly. The white and bright yellow fabric is a durable water repellent, 200 denier nylon/polyester. The Utilitent features adjustable rod ends for side wall tension, a zipped door, vent windows on each side and tie down loops on all corners for additional ground anchoring. 1.8m x 1.8m and 2.4m tents are available. Door Designs “A” Model Includes two screen windows with roll up flaps, three ties down cords through the hub, ground flaps, single zippered front door, exterior roof line loops for tie down. “D” Model Includes two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, heavy duty frame, wide open front, snap and loops with interconnectable flaps (connect 2 tents together), ventilation hose entry sleeve, interior and exterior roof line loops for tie down.

ORDERING DETAILS Product No Description Weight D-161-00-F “A” Style Jointers Tent 1.8 x 1.8 x 1.8m 9.1kgs D-161-01-F “A” Style Jointers Tent 2.4 x 2.4 x 2.0m 14.1kgs D-161-02-F “D” Style Jointers Tent 1.8 x 1.8 x 1.8m 9.5kgs D-161-03-F “D” Style Jointers Tent 2.4 x 2.4 x 2.0m 14.5kgs


SECTION 7

Compression Equipment Hand Operated Hydraulic Compression Tool Open Hand Compression Tool – G06 & Carrying Case


Burndy MD6 Manual Compression Tool Lightweight, dependable, bent wooden handled tool. Uses industry standard interchangeable “W” die sets. Full range of “W” dies for: -

• Cable Lugs and Fittings • Overhead Line Connectors and Fittings including

ABC SPECIFICATION Force: 50kN Range: 10-120mm² Cu

16 – 100mm² Al Weight: 2.7kg Burndy Y35 Hydraulic Compression Tool The Y35 tool is a compact portable self-contained hydraulic hand compressor, rapid ram advance with swivel G head, positive push button die locks. The Y35 is supplied in a steel carrying case, which has integral die storage compartment (no die). Full range of “U” dies for:-

• Cable Lugs and fittings (LV/HV) cables • Overhead Line connectors & fittings including ABC

SPECIFICATION Force: 120kN Range: 10-300mm² Cu-Al Weight: 6kg The Burndy Y35 Hydraulic Compression Tool is also available as a remote head.

Hydraulic Pump Foot operated double speed pump, developing a maximum pressure of 700 bar. The pump is supplied with 3m long high-pressure flexible hose complete with female self-lock quick coupler. Pressure can be withdrawn at any time during operation by depressing the release lever. A solid shaped stand gives the pump stability during operation. SPECIFICATION Operating Pressure: 700 Bar Length: 680mm Width: 200mm Height: 163mm Weight: 9.2kg

ORDERING DETAILS Product No Description G-458-MD6-F Compression Tool Burndy MD6 G-458-02-F Steel Carrying Case c/w Die Tray ORDERING DETAILS Product No Description G-459-Y35-F Hydraulic Tool Burndy Y35 G-459-Y35BH-1-F Hydraulic Tool Burndy Y35 –

Remote Head

ORDERING DETAILS Product No Description G-868-F Hydraulic Foot Pump

MANUALLY OPERATED COMPRESSION TOOLS


The GO6 open hand-operated compression tools have a C-Shaped 360° swivel compression head. For the infinitely variable length adjustment of the new type of telescopic handles, these are loosened and tightened respectively by turning. Carrying Case Empty for storing of one mechanical hand-operated compression tool Primat 06-T, G06-T or G06-300T and 15 compression dies.

ORDERING DETAILS Product No Description K-303-527-527-F Compression Tool Primat 02D K-303-871-002-F Compression Tool Primat 06T K-303-871-003-F Compression Tool Primat G06-T K-303-871-004-F Compression Tool Primat

G06-300T

ORDERING DETAILS Product No Description K-305-295-001-F Steel Box for Compression Tool

Open Hand Operated Compression Tool – GO6

SPECIFICATION

Type Nominal Compressive Force kN

Total Length

mm

Cross Sections

Copper mm²

Aluminium

mm²

Hexagonal Dies max Code No. Width

Cu Al mm

Weight

kg

Primat 02D 25 400 6-35 16-50 12 16 25 1.4 Primat 06-T 60 540-750 6-185 16-150 25 25 32 3.2

Primat G06-T 60 550-760 6-185 16-150 25 25 38 3.3 Primat G06-300T 60 560-770 6-185 16-300 25 34 50 4.0


SECTION 8

Underground Equipment Trench Rollers, Twin Link Corner Rollers & Hoop Roller V Frame Guide Set, Trench Feed Roller Set & Cable Roller Triple Corner Roller, Manhole Quadrant Roller & Manhole Entry Roller Duct Entry Rollers & Cable Duct Protection General Duty Pulling Stockings (E-546 & E-856)


Trench Roller Designed for use on soft earth or in trench work. Robust die cast aluminium roller mounted on oil pregnated bearings. SPECIFICATION: Dimensions: 390mm x 260mm x 230mm Weight: 5.7kg Hoop Roller (Aluminium Roller) A cable roller designed to bridge existing cables. Fitted with oil-impregnated bearings for use in adverse site conditions. Tubular steel frame construction, choice of two types of rollers. SPECIFICATION: Dimensions: 290mm x 235mm x 250mm Weight: 5kg Cable Roller – Steel Sheave This roller is designed for use in trenches, on pavements or across steel gantries in factories. Fitted with sealed for life ball to give frictionless running. Tubular steel frame and steel sheave, zinc plated and gold passivated. SPECIFICATION: Dimensions: 590mm x 225mm x 195mm Max Cable Dia: 150mm (6”) Weight: 4.5kg

ORDERING DETAILS


D-197 Trench Roller ORDERING DETAILS


D-196 Hoop Roller (Aluminium Roller)

ORDERING DETAILS

Product No Description D-193 Cable Roller

(Steel Sheave)


“V” Frame Guide Set Positioned in front of drum to guide cable into trench or duct. SPECIFICATION: Dimensions: 825mm x 500m x 415mm Weight: 19.45kg Trench Feed Roller Set Guides cables into trench, adjustable vertical guide rollers. SPECIFICATION: Dimensions: 1000mm x 200mm x 250mm Weight: 22kg Lead Roller A horizontal roller to protect cable feeding from drum, fitted with end guides SPECIFICATION: Dimensions: 1000mm x 300mm x 180mm Weight: 11.02kg Manhole Entry Roller This roller is used to guide draw rope into and out of manhole openings. SPECIFICATION: Dimensions: 260 x 150 x 160mm Weight: 2.4kg

ORDERING DETAILS

Product No Description D-194 “V” Frame Guide Set ORDERING DETAILS Product No Description D-195 Trench Feed Roller Set D-439 Lead Roller ORDERING DETAILS Product No Description D-1041-001 Manhole Entry Roller


Triple Corner Rollers Used in pairs Triple Corner Rollers are used on bends in open trench work. The frame is manufactured in tubular steel, and the rollers are cast aluminium. SPECIFICATION: Dimensions: 620 x 310 x 330mm Weight: 18.2kg Twin Link Corner Roller Used for general purpose cable protection, where bends or other hazards arise. SPECIFICATION: Dimensions: 300mm x 280mm x 300mm Weight: 7.3kg Manhole Quadrant Roller Three cast aluminium rollers mounted in a tubular steel frame, allows cable to gradually turn through 90° into manhole opening. The effective rolling radius is 800mm. SPECIFICATION: Dimensions: 810 x 600 x 210mm Weight: 17.4kg

ORDERING DETAILS

Product No Description D-1047-001 Triple Corner Roller

ORDERING DETAILS Product No Description D-437 Vertical Link Roller D-438 Twin Link Corner Roller

ORDERING DETAILS Product No Description D-1048-001 Manhole Quadrant Roller


Duct Entry Rollers Duct Entry Rollers are designed to allow rope or cable into and out of the duct mouth. They are available for different sizes of duct ranging from 25mm – 100mm Duct Dia 25 – 28mm 30 – 33mm 42 – 45mm 55 – 60mm 75 – 80mm 90 – 100mm Cable Duct Protection Fits into cable duct entries to protect cable sheath from damage. Elbow Dia Socket Dia 80mm 80mm 100mm 100mm 120mm 120mm 150mm 150mm

ORDERING DETAILS

Product No Description D-938-001 Duct Roller 25-28mm D-938-002 Duct Roller 30-33mm D-938-003 Duct Roller 42-45mm D-938-004 Duct Roller 55-60mm D-938-005 Duct Roller 75-80mm D-938-006 Duct Roller 90-100mm

ORDERING DETAILS

Product No Description D-202 Cable Duct Elbow – 80mm D-203 Cable Duct Elbow – 100mm D-204 Cable Duct Elbow – 120mm D-205 Cable Duct Elbow – 150mm D-206 Cable Duct Socket – 80mm D-207 Cable Duct Socket – 100mm D-208 Cable Duct Socket – 120mm D-209 Cable Duct Socket – 150mm


General Duty Pulling Stockings Double Weave, Flexible Eye(s)

Dia Range

mm Min Breaking Strength (kg)

Product No

Single Eye

Product No

Double Eye 10 -20 1,860 E-546-1021 E-546-1022

20 – 30 2,256 E-546-2021 E-546-2022 30 – 40 3,696 E-546-3021 E-546-3022 40 – 50 5,490 E-546-4021 E-546-4022 50 –65 5,490 E-546-5021 E-546-5022 65 – 80 7,320 E-546-6521 E-546-6522 80 – 95 7,320 E-546-8021 E-546-8022 95 – 110 10,613 E-546-9521 E-546-9522 110 – 130 10,613 E-546-11021 E-546-11022 130 – 150 12,736 E-546-13021 E-546-13022 150 – 180 12,736 E-546-15021 E-546-15022

Grip Length – 10-95mm diameter = 600mm 110-150mm diameter = 900mm

Dia Range

mm Min Breaking Strength (kg)

Product No Single Fleeting

Eye

Product No Open Sleeve

10 - 20 1,860 E-855-1021 E-856-1020 20 – 30 2,256 E-855-2021 E-856-2020 30 – 40 3,696 E-855-3021 E-856-3020 40 – 50 5,490 E-855-4021 E-856-4020 50 –65 5,490 E-855-5021 E-856-5020 65 – 80 7,320 E-855-6521 E-856-6520 80 – 95 7,320 E-855-8021 E-856-8020 95 – 110 10,613 E-855-9521 E-856-9520 110 – 130 10,613 E-855-11021 E-856-11020 130 – 150 12,736 E-855-13021 E-856-13020 150 – 180 12,736 E-856-15021 E-856-15020 Grip Length – E-855 10-95mm diameter = 600mm 110-150mm diameter = 900mm E-856 1200mm – Standard (1800mm – Special)

Double Weave, Single Fleeting Eye and Open Sleeve


SECTION 9

Miscellaneous Information Contact Details Map of How to Find Us


Contact Details

CBS Products Ltd Pillings Road Industrial Estate

OAKHAM, Rutland, LE15 6QF

United Kingdom

Telephone No: +44 (0) 1572 723665 Fax No: +44 (0) 1572 756009

E-mail: [email protected] Website: www.cbsproducts.com

Sales Team

Mr Bryan Mitchell - Technical Sales Director Mr John Davies - Sales & Marketing Manager Mrs Karen Bruce - Customer Service Co-ordinator Mr Ray Gladwinfield - Customer Administrator & Estimator Miss Laura Smith - Clerical Assistant

Account Manager Mr Shaun Ryan - Account Manager (Western UK & Ireland) Mobile No: 07710 976 993


Find Us

Documents

CBS Catalogue