Cblm Gasoline Fuel System

Embed Size (px)

DESCRIPTION

COMPETENCY BASED LEARNING MODULE IN SERVICING GASOLINE FUEL SYSTEM

Text of Cblm Gasoline Fuel System

COMPETENCY BASED LEARNING MATERIALS

Sector: AUTOMOTIVE/LAND TRANSPORT Qualification: AUTOMOTIVE SERVICING NC II Unit of Competency: SERVICE ENGINE MECHANICAL COMPONENTS Module Title: SERVICING ENGINE MECHANICAL COMPONENTS (GASOLINE FUEL SYSTEM)Technical Education and Skills Development Authority MADDELA INSTITUTE OF TECHNOLOGY Maddela, Quirino

HOW TO USE THIS COMPETENCY-BASED LEARNING MODULEWelcome to the Module: SERVICING COOLING SYSTEM. This module contains training materials and activities for you to complete. The unit of competency "SERVICE ENGINE MECHANICAL COMPONENTS" contains the knowledge, skills and attitudes require for Automotive servicing National Certificate Level II (NC II ). You are required to go through a series of learning activities in order to complete each learning outcome of the module. In each learning outcome there are Information Sheets, Resource Sheets and Reference Materials for further reading to help you better understand the required activities. Follow these activities on your own and answer the self-check at the end of each learning outcome. Get the answer key from your instructor and check your work honestly. If you have questions, please dont hesitate to ask your facilitator for assistance. Recognition of Prior Learning (RPL) You may already have some or most of the knowledge and skills covered in this module because you have: been working for someone already completed training in this area

If you can demonstrate to your trainer that you are competent in a particular skill or skills, talk to him/her about having them formally recognized so you wont have to do the same training again. If you have qualifications or Certificates of Competency from previous trainings, show them to your trainer. If the skills you acquired are still relevant to this module, they may become part of the evidence you can present for RPL. At the end of this learning material is a Learners Diary, use this diary to record important dates, jobs undertaken and other workplace events that will assist you in providing further details to your trainer or assessors. A Record of Achievement is also provided for your trainer to complete once you completed the module. This learning material was prepared to help you achieve the required competency in Servicing Engine Mechanical Components. This will be source of information for you to acquire the knowledge and skills in this particular trade independently and your own pace with minimum supervision or help from your instructor.

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Date Developed: May 2011

Document No.

Issued by:

Developed by:EDWARD P. ALIP

Page 2 of 112

Revision # 00

In doing the activities to complete the requirements of this module, please be guided by the following: Talk to your trainer and agree on how you will both organize the training under this module. Read through the module carefully. It is divided into sections that cover all the skills and knowledge you need to successfully complete Work through all information and complete the activities in each section. Read the information sheets and complete the self-check provided in this module. Most probably your trainer will also be your supervisor or manager. He/She is there to support you and show you the correct way to do things. Ask for help. Your trainer will tell you about the important things you need to consider when you are completing the activities and it is important that you listen and take notes. You will be given plenty of opportunities to ask questions and practice on the job. Make sure you practice your new skills during regular work shifts. This way you will improve both your speed and memory and also your confidence. Talk to more experienced work mates and ask for their guidance. Use self-check questions at the end of each section to test your own progress. When you are ready, ask your trainer to watch you perform the activities outlined in this module.

As you work through the activities, ask for written feedback on your progress. Your trainer keeps feedback/pre-assessment reports for this reason. When you have completed this learning material and feel confident that you have had sufficient knowledge and skills, your trainer will arrange an appointment with a registered assessor to assess you. TheDate Developed: May 2011 Document No.

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Issued by:

Developed by:EDWARD P. ALIP

Page 3 of 112

Revision # 00

results of the assessment will be recorded in your Competency Achievement Record.

LIST OF COMPETENCIES `CODE NO. ALT723301 ALT723302 ALT723303 ALT723304 ALT723305 ALT723306 ALT723307 ALT723308 ALT723309 ALT723310 ALT723311 ALT723312 ALT723313 ALT723314 ALT723315 CORE COMPETENCIES Perform Diesel Engine Tune Up Perform Gas Engine Tune Up Service Automotive Battery Service Ignition System Test and Repair Wiring/Lighting System Perform Underchassis Preventive Maintenance Service Starting System Service Charging System Service Engine Mechanical System Service Clutch System Service Differential and Front Axle Service Steering System Overhaul Manual Transmission Service Brake System Service Suspension System

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Date Developed: May 2011

Document No.

Issued by:

Developed by:EDWARD P. ALIP

Page 4 of 112

Revision # 00

MODULE CONTENT QUALIFICATION: AUTOMOTIVE SERVICING NC II

UNIT OF COMPETENCY: SERVICE ENGINE MECHANICAL COMPONENTS MODULE TITLE: SERVICING GASOLINE FUEL SYSTEM

INTRODUCTION: This module covers the principles of operation, servicing, and overhauling gasoline fuel system NOMINAL DURATION: 16 HOURS SUMMARY OF LEARNING OUTCOMES: 1. Explain fuel octane rating 2. Identify fuel pump types 3. Perform carburetor adjustment 4. Overhaul carburetor ASSESSMENT CRITERIA: 1. Fuel octane rating information is accessed and used in accordance with manufacturers specification. 2. Data are gathered interpreted from American Petroleum Institute (API) 3. Safety measures are applied in dealing with fuel 4. Fuel pump types are identified according to usage 5. Classification of fuel pumps identified 6. Removed and installed fuel pumps according to service steps and procedures 7. Technical data are accessed and interpreted from manufacturers specification.TESDAMIT QADate Developed: May 2011 Document No.

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Issued by:

Developed by:EDWARD P. ALIP

Page 5 of 112

Revision # 00

8. Tools & equipment are used in accordance with industry standard. 9. Carburetor is overhauled in accordance with the required steps and procedures. 10. Appropriate tools are used in adjusting carburetors 11. Carburetor adjustment specifications is obtained according to repair manual 12. Adjusted carburetor according to required procedure

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Date Developed: May 2011

Document No.

Issued by:

Developed by:EDWARD P. ALIP

Page 6 of 112

Revision # 00

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Date Developed: May 2011

Document No.

Issued by:

Developed by:EDWARD P. ALIP

Page 7 of 112

Revision # 00

EXPLAIN FUEL OCTANE RATING LEARNING OUTCOME #1 CONTENTS: 1. Properties of gasoline fuel 2. Fuel octane rating 3. Safety measures in handling fuels ASSESSMENT CRITERIA: 1. Fuel octane rating information is accessed and in accordance with manufacturers specification. 2. Data are gathered interpreted from American Petroleum Institute (API). 3. Safety measures are applied in dealing with fuel.

CONDITIONS: Students/Trainees must be provided with the following: WORKPLACE 1. Learning resource area 2. Work station EQUIPMENT/TOOLS: 1. Engine mock-up (carbureted engine)

MATERIALS 1. Learning media (modules, computer set, reference books, products brochures) 2. API manual 3. Gasoline fuel

METHODOLOGIES: 1. Interactive discussion 2. Self-paced instruction 3. Film viewingTESDAAuto Servicing NC ASSESSMENT METHOD : II MIT Service Engine QA Mechanical SystemDate Developed: May 2011 Document No.

Issued by:

SYSTEM

1. Written exam 2. Oral interview

Developed by:EDWARD P. ALIP

Page 8 of 112

Revision # 00

LEARNING EXPERIENCES/ACTIVITIES

EXPLAIN FUEL OCTANE RATING LEARNING OUTCOME # 1 LEARNING ACTIVITIES 1. Read information sheet # 9..1-1 SPECIAL INSTRUCTION If you have some problem on the content of the information sheet dont hesitate to approach your facilitator If you feel that you are now kn owledgeable on the content of the information sheet you can now answer self-check provided in the module Compare your answers to Answer key #9.1-1Document No.

Answer self-check # 9.1-1

1. Properties of gasoline fuel and fuel octane rating

TESDAMIT QA

SYSTEM

Auto Servicing NC II Service Engine Mechanical System

Date Developed: May 2011

Issued by:

Developed by:EDWARD P. ALIP

Page 9 of 112

Revision # 00

2. Read information sheet 9.1-2 Safety measures in handling gasoline fuels

Evaluate your own work using the performance criteria checklist

Answer self-check #9.1-2 Safety measures in handling gasoline fuels

INFORMATION SHEET # 9.1-1 PROPERTIES OF GASOLINE FUEL LEARNING OBJECTIVES: After reading this information sheet, you should be able to: 1. Explain the properties of gasoline fuels;