© Copyright 2004 Continental Biomass Industries, Inc.The CBI logo is a registered trademark of Continental Biomass Industries, Inc. All trademarks are the property of their respective owners.040426/OEMM/2.0M

The CBI difference: More Value — by Design

Distributed by:

the Mother of all Shredders!

Annihilator

Designed for all types of contaminated C&D, MSW, and other bulky waste.

Features

• High volume throughput – 100+ tons/hour

• 20,000 pound rotor made of 6" highstrength forging

• Dual Hägglunds car crusher-style radialpiston motors

• 8,000 pound anvil

• Anvil cutting gap adjusts instantaneouslyto feed stock and desired end product size

• 8'x10'4" shredding chamber

• Full radio remote

DescriptionThe CBI Annihilator is truly the Mother of all Shredders! From theframe up, the Annihilator is designed to handle 100+ tons/hour of themost contaminated, co-mingled waste streams you can throw at it.Whether configured for stationary or portable applications, theAnnihilator delivers extreme throughput for primary shredding of C&D,bulky waste, and MSW. As with all CBI products, every feature andcomponent is designed for the most durability, easiest maintenance,and lowest cost of operation available.

RotorThe single, 6" forged steel, 20,000 pound rotor, 12" support shaft andbearing housings are designed for extreme duty shredding. 42 hammers,each weighing 95 pounds, are secured to the rotor in machined grooves.Each 22 pound forged steel, reversible tip, is bolted into machinedcross-slots on its hammer, allowing fast and easy reversal or replacement.Dual Hägglunds (car crusher-style) radial piston direct drive, shaft-mounted motors provide 97% instantaneous torque at startup (no ramp-up here). The single-rotor design virtually eliminates the cloggingassociated with dual counter-rotating designs, and allows the use of aremotely adjustable anvil.

Shredding ChamberThe shredding chamber is lined with 11/4" Hardox 400 wear-resistanthog liners for maximum durability. The 8' wide by 10' 5" long box,with three extended sides, provides unrestricted loading of large amountsof material with less spillage.

FrameFrame construction is often overlooked as an important part in achievingoverall durability in a shredder. The tubular construction of theAnnihilator frame provides 2-3 times more rigidity than conventionalI-beam construction, providing the most rugged base possible for theother Annihilator components. Super single tires provide high floatationand, when the unit is on-site, debris can’t be trapped as often happens

in the space between dual tires, so there’s significantly less chance ofblowouts.

AnvilThe 8,000 anvil has bolt-on, replaceable teeth for ease of maintenance.The anvil door is hydraulically positioned via remote control, to allowrapid adjustment for varying finished product sizes. Significant heightbetween the bottom of the rotor/anvil and the discharge belt greatlyreduces clogging. A heavy duty impact plate deflects objects from beingdriven through the discharge belt, further reducing downtime.

Discharge ConveyorThe 48" wide, 660 6-ply, steel paddle belt, single discharge conveyor,actively pulls and removes material from under the hog chamber,preventing clogging of materials. The 40HP high-torque dischargeconveyor motor uses a planetary drive to extend life and reducemaintenance. The 25 degree incline of the discharge conveyor providesa discharge height of up to 13'.

Power UnitThe dual Rexroth axial piston transmission pumps that power theAnnihilator can be driven by either diesel or electric power. The standardfactory configuration is powered by a CAT C-16, 630 HP diesel engine.For stationary applications, the Annihilator can be driven by two,300-500 HP crusher duty electric motors.

Control/Misc.The Allen-Bradley PLC is fed from a number of sensors locatedthroughout the Annihilator, so maximum fuel efficiency and throughputare achieved at all times. The PLC controller provides automatic controlfor functions such as a Auto Material Purge and Auto Rotor ReverseCycles, to aid in clearing non-shreddable objects. Full remote radiocontrol is provided with full, independent, mechanical backup.Hydraulically actuated landing gear provide ease of setup on site.

SpecificationsOverall

Length 51' 10"Height 13' 6"Width 9' 5"Weight 105,000 pounds

Box

Length 10' 5"Width 6' 8"

Output conveyor

Length 30'Width 48"

Rotor

Length 10' 4"Diameter 42"Weight 20,000 poundsHammers 42Hammer Weight 95 pounds, eachTips, Reversible 22 pounds, each

Anvil

Weight 8,000 poundsSupport 5" dia. high strength, hardened

steel pivot pins and bushingThroughput 100+ tons/hourPower

Diesel CAT C-16, 630 HP; standardElectric Two (2) 300-500 HP motors

Electrical Radio remote control for allfunctions, with full,independent mechanicalbackup

Annihilator

In the Field

The perfect solution for all types of contaminated demolition debris, bulky waste, tires, carpets, mattresses, MSW, etc...etc...etc.The perfect solution for all types of contaminated demolition debris, bulky waste, tires, carpets, mattresses, MSW, etc...etc...etc.

Tubular frame construction provides greaterrigidity and strength than conventional I-beam.

Super single tires provide high floatationand eliminate trapped debris.

Hydraulically actuated, remote-controlled anvil door with adjustablecutting gap allows for instantaneoussizing of finished product. Extra-wideopening provides ease of maintenanceand eliminates clogging.

6" forged steel, 20,000 pound rotor features42 hammers weighing 95 pounds each forextreme-duty shredding, with reversible tipsbolted into machined cross slots for easymaintenance AND:• Automatic material purge cycle

• Jammed rotor detection

• Auto reverseHighest quality components:CAT motors, Rexroth pumps,Allen Bradley controls,Hägglunds drives.

48" wide, 660 6-ply steel paddle belt singledischarge conveyor pulls and removesmaterial from under the hog withoutclogging. Discharge height to 13 feet.

The 8' wide by 10'5" feed opening withextended sides provides unrestrictedloading of large volumes of materialwithout spillage. Shredding chamber linedwith 11/4" Hardox 400 wear resistant hogliners for maximum durability.

Dual Hägglunds car crusher-style,radial-piston direct-drive, shaft-mounted motors provide 97%instantaneous torque at startup.

C & D Systems available in stationary and portable configurations. Electric or Diesel powered. MSW

“From the owner all the way down to the guys inparts and service, they are very responsive.There’s a great sense of urgency at CBI, makingsure my company is up and running — all thetime.”

Doug Casella, Vice ChairmanCasella Waste Systems

“They stand behind their equipment and makesure it is right.”

Chris Lucarelle, Site ManagerWaste ManagementWilbraham, MA