inncon industriesinncon industries inncon industriesinncon industries

Range in kg/cm Hyd Fluid

0-100 kg/cm Oil

0-400 kg/cm Oil

0-700 kg/cm Oil

0-1000 kg/cm Oil

0-100 kg/cm Water

0-400 kg/cm Water

0-700 kg/cm Water

0-1000kg/cm Water

-760-0mmhg. Air

-760-0mmhg Air

This M/c work on the reverse principle of pressure pumps. Vacuum isdeveloped by expansion of air inside the large capacity serew pump. Thispump has two valves on for releasing vacuums and one for working thesecond cycle so that full vacuum is attended with less effort.

Authorised Dealer

INNCON DEAD WEIGHT PRESSURE GAUGE TESTERSINNCON DEAD WEIGHT PRESSURE GAUGE TESTERSINNCON INDUSTRIES is a young Engineering Company into manufacturing of premium quality Dead Weight Pressure Gaugetesters.Our Calibration laboratory is being set up with consultancy from Regional Testing Center. They have certified our masterDead Weight Tester and also provided training in correct calibration methods to our Engineers.We make very high accuracy Dead Weight Pressure Gauge Tester of the accuracy levels of 0.025% and better for precisiontesting applications and for meeting the needs of the international market.

Application : Calibration of Industrial Dead Weight Pressure Gauge Tester Pressure Gauges, Vacuum Gauge, PressureTransducers, Transmitters, Transfer Standards, Pressure Switch, Recorders etc. in labs and direct, high accuracymeasurement of pressure in system and processes, Hydortesting in Pipeline applications etc.

Free Piston Assemble is made of special HCHC steel for low pressures andTungston Carbide for High Pressures, Pistons are ground and super finishedto accurate size and very fine surface finish to provide true floating action.HCHC Pistons are hardened, tempered, stress relieved also, Datum levelindicatoris provided for accurate indications for operating position.

Operating Principle : When fluid pressure generated by a secrew pump actson the bottons of a vertically free floating piston the force produced pushes theload free piston vertically upwards. The Piston floats freely in its cylinder and thepressure in the circuit will be determined by the weights loaded onthe pistondivided by the effective area of the piston with corractions us for value ofacceleration due to gravity air buoyancy. Surface tension and dotum leveldifference.

INNCON Series 1500

kg/cm

Min Step MaxStep with

Incrementalweights

LP 0.2 0.05 16 0.005HP 10 0.5 160 0.05LP 0.2 0.1 25 0.01HP 22 1 250 0.1LP 0.4 0.1 40 0.01HP 34 1 400 0.1LP 1 0.2 22 0.05HP 50 2 600 0.2LP 1 0.2 70 0.02HP 65 2 800 0.2LP 2 0.5 100 0.05HP 100 5 1000 0.5LP 0.2 0.05 30 0.005HP 30 1 600 0.1

INNCON Series 1300

kg/cm

Min Step MaxStep with

Incrementalweights

0.1 0.01 2.5 0.0020.1 0.01 6 0.0050.2 0.05 16 0.0050.2 0.1 25 0.010.4 0.1 40 0.011 0.2 70 0.022 0.5 100 0.022 1 160 0.054 1 160 0.054 1 250 0.1

INNCON 900 SERIES

INNCON 1000 SERIES

INNCON 1100 SERIES

inncon industriesinncon industries inncon industriesinncon industriesHigh quality test gauges with accuracy 0.25% of gauge span are available to be used with gauge comparator.

Dial 100, 150, 250 mm sizes withor without antiparallax mirror.Single or double scale.

Bourdon & Shank Ss316 Properly stabilized by stress relieving and cycycling.Movement Gears Ss304 or Ss316.Connection BSP, npt, Metric, flange, bottom or back as required.Pointer Standard, center zero adjustment, micro-zero adjustment,

normal or knife edge, dummy pointer for maximum pressureindication.

Zero Stopper Pin or soft springCase Weatherproof pressure die cast aluminum with or without blowout device.Windows Acrylic or toughened glassCalibration Individually calibrated. Test certificate traceable to National Standard can be provided to

meet ISO 9000 requirements. Available in any unit required - kg/cm2, kPa, Mpa, psi, Ton/in2,Tonne/mm2, mmHg, inHg, MMwG, etc, Hydraulic gauges with specified ram dia.Glycerin filled gauges available for vibrating/ pulsting systems. Dual Range gauges are alsoavailable. Dimensions: Drawings provided or request.

Bourdon in SS316Teflon Lined.Flanges element/Diaphragm : SS316, SS316L or silver.Silicone Oil FilledUsed in chemical industry.Exposed diaphragm for viscous, slurry type process reqirements are also available.Homogeniser gauges for milk Plants are provided.

Chemical seal Gauges :-

RANGE(In kg/cm)

LEAST COUNT LEAST COUNT LEAST COUNT(In kg/cm) (In kg/cm) (In kg/cm)Accuracy1% Accuracy0.5% Accuracy0.25%

0-1 0.02 0.02 0.02 0.01 0.01 0.010 0.005 0.0050-16 0.02 0.02 0.02 0.01 0.01 0.010 0.005 0.0050.2.5 0.02 0.05 0.05 0.02 0.02 0.02 0.01 0.010-4 0.1 0.1 0.1 0.05 0.05 0.02 0.02 0.010.6 0.1 0.1 0.1 0.05 0.05 0.05 0.025 0.0250-10 0.2 0.2 0.2 0.1 0.1 0.05 0.05 0.050-16 0.4 0.4 0.2 0.2 0.2 0.1 0.1 0.50.25 0.5 0.5 0.2 0.2 0.2 0.2 0.1 0.10-40 1 1 0.5 0.5 0.5 0.2 0.2 0.10-60 1 1 0.5 0.5 0.5 0.5 0.25 0.250-100 2 2 1 1 1 0.5 0.5 0.250-160 4 4 2 2 2 1 1 0.50-250 5 5 5 2 2 2 1 10-400 10 10 5 4 4 2 2 10-600 10 10 10 5 5 5 2.5 20-700 10 10 10 5 5 5 2.5 20-800 10 10 10 5 5 5 5 2.50-100 20 20 10 5 5 5 4 2.5

Techanical Specifications : Accuracy : 0.1%, 0.05%,0.03% and 0.025%Uncertanity Better than 0.01%Ranges : Various models from 1-1000 kg/cm2, Both single and Double

range.Units : kg/cm2, bar, psi,Ib/in2, or any other units.Operating Medium : Oil (Sebacate) Water for Oxygen Gauges, Food and Drugs

Industries.Piston Matrial : HCHC Steel for LOW Pressure range.

Tungsten Carbide for High Pressure range.Cylinder Materials : Mield Steel (With Phosphating Black) Or SS 304, 306Certification : Traceable to National / International Standard.Standard accessories : 1 gauge connector of BSP and complete with one set of

weights in a storage box, 1 Instruction manual, 1 tin of oil and a toolbox containing, 1 pointer puller, 1 puller, 1 pointer punch, Angle connectorfor Back mounting Gauges, 3 Nos. Adaptors, 4 spanners, 2 Allankey, a screw drive and One set of spareseals, The tester and weights are supplied in separate carrying boxes.

1/2

kg/cm

Min Step Max Step withIncremental

weights

10 1 400 0.110 2 600 0.210 2 700 0.210 2 800 0.250 5 1000 0.5

INNCON Series 1400

Our Other product :INNCON Pressure / Vacuum Gauge Comparators.INNCON Pressure / Vacuum Gauge Dead Weights TestersINNCON Pressure / Vacuum Gauges of accuracies 1%, 0.5 and 0.25% fortesting Pruposes.Overhaul, repair, servicing , recalibration and recertification of Dead WeightsPressure Gauge Testers.

INNCON INDUSTRIESWorks : Plot No. M.C.F. 3, Numberdar Market, Ismailpur,

Faridabad, Haryana - 121003 Mob: +91-9810866482E-mail : innconindustry@yahoo.com Web. : www.innconindustries.com

Page 1Page 2