CATEYE STRADA CC-RD100N Quick Start

Click the button and follow the in-structions.

CATEYE STRADACC-RD100NQuick Start

Thank you for purchasing our cyclocomputer CATEYE STRADA.

This Quick Start Manual explains how to set up the computer and how to install the unit on your bicycle.Please set up the unit according to the specified procedure, then it will be ready for use as a cyclocomputer.

Before use, read the instruction manual that comes with the product thoroughly to the end to understand the functions of this unit, and to use it safely in a correct manner.

This PDF contains a movie file.When you click on the movie screen, a message regarding security appears. Click the Trust in the text or Play button to close the message.Click the screen again to play the movie.

CATEYE STRADAQuick Start Manual Contents

Click the item you wish to view.

Operation of buttonsSet up the computer by operating the buttons as follows.Check the button position before you start setting up.

MODE

MENU

Back

Press the MENU button and the MODE button on the back of the computer.

CATEYE STRADAQuick Start Manual Setting up the computer

Setting the speed unit

Entering the tire circumference

Setting the clock display

Measuring screen (Setup completed)

Setting the hour

Setting the minute

Clear all data (initialization) Clear all data (initialization)Press the AC button on the back of the computer.After full lighting of the screen, the computer switch-es to the speed unit setting screen to start setup.

ACAC

Full lighting Setting the speed unit





Setting the hour

Setting the minute


Clear all data (initialization)


Setting the speed unitWhen the MODE button is pressed, either km/h or mph is selected for the speed unit display. Select the display of your choice.After selecting, press the MENU button to proceed to the next step Entering the tire circumference.

MENU

To the next step

MODE

km/h mph




Setting the hour

Setting the minute



Clear all data (initialization) Entering the tire circumferenceEnter the tire circumference (mm) of your bicycle with 4 digits using the tire circumference reference table. Pressing the MODE button increases the value flashing, and pressing and holding the MODE button moves to the next digit. After entering, press the MENU button to proceed to the next step Setting the clock display.

Entering the tire circumference Move digitIncrease the value

MENU

To the next step

MODEMODE(Press and hold)



Setting the hour

Setting the minute




Clear all data (initialization) Setting the clock displayWhen you press and hold the MODE button, 24h flashes.When the MODE button is pressed, either 12h or 24h is selected for the clock display. Select the display of your choice.After selecting, press and hold the MODE button to pro-ceed to the next step Setting the hour.

Clock displayTo the next step

MODE

24h 12h

MODE(Press and hold)



Setting the minute

Setting the hour




Clear all data (initialization) Setting the hourPressing the MODE button increases the value flashing (Hour of the clock). Enter any value.After entering, press and hold the MODE button to pro-ceed to the next step Setting the minute.

HourTo the next step

MODE

Increase the value

MODE(Press and hold)



Setting the minute

Setting the hour




Clear all data (initialization) Setting the minutePressing the MODE button increases the value flashing (Minute of the clock). Enter any value (Pressing and holding MODE rapidly increases the value).After entering, press the MENU button to switch to the measuring screen.

Minute

MENU

Setup is completed To the measuring screen

MODE

Increase the value



Setting the minute

Setting the hour




Clear all data (initialization)Now, setup of the computer is completed.

If the bracket and speed sensor are not installed on your bicycle, return to Contents, click How to install the brack-et and How to install the speed sensor, and then install them according to the instructions.

Measuring screen

CATEYE STRADAQuick Start Manual How to install the bracket

The Bracket being used in this movie is for wireless products and there is no wire attached.When you install the bracket band to your bicycle, tighten it so the wire will not be pinched by the stem or handlebar.

Prepare the following parts from the packaged items.

Speed sensor

Magnet

Sensor rubber pad (x2) Sensor rubber pad (x3)

Hook

Nylon ties (x5)

CATEYE STRADAQuick Start Manual How to install the speed sensor

Fixing the wire

Adjust the clearance between the speed sensor and magnet

Adjust the positions of the speed sensor and magnet

Install the magnet

Winding the wire (Installation is completed)

Install the speed sensor Install the speed sensorSelect the suitable size for the front fork diameter of your bicycle from two different sensor rubber bands.

1Attach the sensor hook to the sensor rubber band, and install it to the right front fork of your bicycle. 2Pass the speed sensor through the sensor rubber band installed. Install the sensor rubber band so that it fits in the hook on the top and bottom of the sensor.You may use nylon ties instead of the sensor rub-* ber band.

Hook

Speed sensorRight front fork

Rubber band


Fixing the wire




Install the magnet

Install the speed sensor Install the magnetTemporarily secure the magnet to the right side spoke of the front wheel spoke. Tighten the magnet to such an extent that it can be moved.

Right side spoke

Magnet

To the SENSOR ZONE


Fixing the wire




Install the magnet

Install the speed sensor Adjust the positions of the speed sensor and magnet Adjust the position so that the magnet passes through the SENSOR LINE of the speed sensor.After adjusting, tighten firmly the magnet.

Magnet

Speed sensor (inside the front fork)

SENSOR LINE


Fixing the wire




Install the magnet

Install the speed sensor Adjust the clearance between the speed sensor and magnetAdjust the clearance between the speed sensor and magnet so that it is within 5 mm. When the clearance with the magnet is more than 5 mm, install the speed sensor with 1 to 3 sensor rubber pads in layers.

5 mm 5 mm

or

MagnetSpeed sensor

Sensor rubber pad (1 to 3 sheets)



Fixing the wire



Install the magnet

Install the speed sensor Fixing the wireFix the wire to the front fork with nylon ties. Cut off any excess nylon tie using a nipper.

Nylon ties

Pull securely



Fixing the wire



Install the magnet

Install the speed sensor Winding the wireWind the wire around the brake cable.Caution: Adjust this section so that the wire is

not stretched when you turn the handle.Now, speed sensor installation is completed. See how to install the bracket, and then complete the installation.When the computer is not set up, return to Con-tents, click Setting up the computer, and follow the instructions.


ETRTO Tire size L (mm)47-203 12x1.75 93554-203 12x1.95 94040-254 14x1.50 102047-254 14x1.75 105540-305 16x1.50 118547-305 16x1.75 119554-305 16x2.00 124528-349 16x1-1/8 129037-349 16x1-3/8 130032-369 17x1-1/4 (369) 134040-355 18x1.50 134047-355 18x1.75 135032-406 20x1.25 145035-406 20x1.35 1460

ETRTO Tire size L (mm)40-406 20x1.50 149047-406 20X1.75 151550-406 20x1.95 156528-451 20x1-1/8 154537-451 20x1-3/8 161537-501 22x1-3/8 177040-501 22x1-1/2 178547-507 24x1.75 189050-507 24x2.00 192554-507 24x2.125 196525-520 24x1 (520) 1753

24x3/4 Tubular 178528-540 24x1-1/8 179532-540 24x1-1/4 1905

ETRTO Tire size L (mm)25-559 26x1 (559) 191332-559 26x1.25 195037-559 26x1.40 200540-559 26x1.50 201047-559 26x1.75 202350-559 26x1.95 205054-559 26x2.10 206857-559 26x2.125 207058-559 26x2.35 208375-559 26x3.00 217028-590 26x1-1/8 197037-590 26x1-3/8 206837-584 26x1-1/2 2100

650C Tubular 26x7/8 1920

ETRTO Tire size L (mm)20-571 650x20C 193823-571 650x23C 194425-571 650x25C 26x1 (571) 195240-590 650x38A 212540-584 650x38B 210525-630 27x1 (630) 214528-630 27x1-1/8 215532-630 27x1-1/4 216137-630 27x1-3/8 216918-622 700x18C 207019-622 700x19C 208020-622 700x20C 208623-622 700x23C 209625-622 700x25C 2105

ETRTO Tire size L (mm)28-622 700x28C 213630-622 700x30C 214632-622 700x32C 2155

700C Tubular 213035-622 700x35C 216838-622 700x38C 218040-622 700x40C 220042-622 700x42C 222444-622 700x44C 223545-622 700x45C 224247-622 700x47C 226854-622 29x2.1 228860-622 29x2.3 2326

Measure the tire circumference (L) of your bicycleAdjust the tire pressure properly. With the riders weight applied on the bicycle, roll the wheel one tire revolution with reference to a marker such as the valve, and measure the travel distance on the ground.

Tire circumference reference table

L mm
ENG: NEXT 10: NEXT 11: TOP: Page 4: OffSETUP 4: setup-SENSOR: MOVIE1: NEXT 13: MENU: Page 6: OffPage 7: Page 8: Page 9: Page 10: Page 11: Page 12: Page 13: Page 15: Page 16: Page 17: Page 18: Page 19: Page 20: Page 21: NEXT 1: Page 6: OffPage 7: Page 8: Page 9: Page 10: Page 11: Page 12: Page 15: Page 16: Page 17: Page 18: Page 19: Page 20: BACK 1: Page 6: OffPage 7: Page 8: Page 9: Page 10: Page 11: Page 12: Page 15: Page 16: Page 17: Page 18: Page 19: Page 20: LAST: MENU 2: NEXT 14: MENU 3: setup-TIRE:

Documents

CATEYE STRADA CC-RD100N Quick Start