CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL … group 19...CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL SKIDDER Ship Weight List Price LAGRANGE, GA, USA lbs At Factory OTHER STANDARD

CATERPILLAR MACHINE PRICE LIST 525D525D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory

Standard Equipment:

ELECTRICAL24-volt electrical systemAlarm, back-upAlternator, 115-ampBatteries, maintenance free (2-1000CCA)Lighting system, halogen (4 total)Main disconnect switch with DieselExhaust Fluid (DEF) purgeindicator light

Starter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warning

OPERATOR ENVIRONMENTPower port, 12VConverter, 24V to 12VBeverage holders (2)Headliner with dome lightFloormat, non permeable and removableMirror, rear viewRadio, AM/FM/CD/Sirius-SatelliteComputerized Monitoring System

Instrumentation Gauges:Engine coolant temperatureFuel levelDiesel Exhaust Fluid (DEF) levelHydraulic oil temperatureEngine TachometerTorque converter oil temperature

Instrumentation, Warning Indicators:Air filter restrictionAutograbBrake oil pressureDifferential locksEmissions systemEngineEngine oil pressureHydraulic lockout statusHydraulic filter bypassLockup clutchParking brakePrimary steer pressureStarting aidSystem voltageTransmissionTransmission filter bypassWinch freespool (if equipped)Work lights

Instrumentation, Digital Data:Gear and directionService hour meterFault code and warning description

Computerized diagnostics &monitoring:

Engine fault code logHydraulic system fault code logMachine fault code logMachine electronic componenttroubleshooting capability

POWERTRAINEngine, Cat C7 with ACERT TechnologyEPA/ARB Tier 4 Final and EU Stage IVEquivalent Engine with Cat CleanEmissions Module (CEM)

Fuel priming pump, electricFuel transfer pump, electricFuel filters, inline, primary andsecondary

Air Precleaner, TurbineAir Cleaner, 2-stageCooling, cross-flow system withstationary cores and swing out panel

Stationary CoresEngine coolantFuelHydraulicTransmission

Swing Out PanelAir to air aftercoolerAir conditioner condenser

Reversing cooling fan, hydraulicallydriven on demand

Transmission, countershaftpowershift (6F/3R)

Lock-up torque converterLubed for life driveline slipjoint anduniversal joints

Axles, heavy duty Cat inboard planetaryapproved for odd sized dual tires up to30.5-32 inner and 24.5-32 outer andsingle wide tires up to 73-44with chains

Differential locks, independent frontand rear

Four-wheel enclosed disc service brakesParking brake, hydraulically released,spring applied

Fuel tank, high capacity

OTHER STANDARD EQUIPMENTAccess panels, hinged or removableArticulation lock linkCenter Hitch, dual tapered rollerbearing upper and lower

Ecology drains (engine oil, enginecoolant, hyd tank, fuel tank, axles,transmission)

Fuel fill, ground level

Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green

US-A D U. S. DOLLAR CURRENCY 525D-001


OTHER STANDARD EQUIPMENT (CONT.)

Frames, heavy dutyLimb risers, heavy dutySegregated compartments, engine/CEMand cooling

Product LinkSingle side engine serviceSOS sampling portsTilt CabVandalism protection, lockable doors andcap locks

HYDRAULICSLoad Sense HydraulicsPumps, variable displacement mainand fan

Main control valve, high performanceand multifunctioning

Filter, in-tank returnCAT ToughGuard hoses

ANTIFREEZEIncludes 50% concentration of extendedlife coolant with freeze protection to-36C (-33F) and anti-boil protectionto 106C (223F)




366-4832 525D SKIDDER 21,431 $238,250.......................................203 hp/143.8 inch wheelbase

0P-3512 525D MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.



CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price

USE NO. lbs At FactoryMANDATORY ATTACHMENTS

ARCH/BOOM AND WINCH

ARCH/BOOM (Must Select One)

L 367-1846 ARCH & GRAPPLE, SF 5,934 $30,120...............................Includes: Single function arch; 1.34 sq.m (14.4 sq.ft)continuous rotation grappleREQUIRES: 426-4640 Frame, SF Rear, No fender -OR-

393-8135 Frame, SF Rear, Grapple FenderL 367-1849 ARCH BOOM & GRAPPLE, DF 6,910 $39,770..........................

Includes: Dual function arch and boom; 1.34 sq.m(14.4 sq.ft) continuous rotation grappleREQUIRES: 426-4650 Frame, DF Rear, No Fender -OR-

369-2493 Frame, DF Rear, Grapple FenderL 367-1852 ARCH & WINCH, CABLE 8,552 $16,510..............................

Includes: Cable arch; Heavy duty 2-position fairlead; Highperformance hydraulic logging winch; Cable rear frame withheavy duty, extended coverage cable fenders; For cableapplications only where significant rear tire protectionis requiredREQUIRES: 454-8496 Cab, Encl Cable W/Whl SteeringCANNOT BE USED WITH: 373-4610 Winch, Retrieval

373-4611 Winch, Logging373-4612 Retrieval Ready426-4640 Frame, SF Rear, No Fender393-8135 Frame, SF Rear, Garpple Fender426-4650 Frame, DF Rear, No Fender369-2493 Frame, DF Rear, Grapple Fender

C 476-6796 INDUSTRIAL ARRANGEMENT 339 $11,000............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/Whl Steering

426-4640 Frame, SF Rear, No Fender -OR-393-8135 Frame, SF Rear, GR Fender -OR-426-4650 Frame, DF Rear, No Fender -OR-369-2493 Frame, DF Rear, GR Fender

CANNOT BE USED WITH: 373-4610 Winch, Retrieval373-4611 Winch, Logging373-4612 Retrieval Ready

WINCH (Grapple Skidder Only)

L 373-4612 RETRIEVAL READY 0 NC......................................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-

476-6796 Industrial ArrangementL 373-4610 WINCH, RETRIEVAL 1,733 $17,140.................................

Includes: Hydraulic retrieval winch; Fairleadroller subassemblyCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-

476-6796 Industrial Arrangement





ARCH/BOOM AND WINCH (CONT.)

WINCH (Grapple Skidder Only) (Cont.)

L 373-4611 WINCH, LOGGING 1,879 $22,590..................................Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-


FRAME

REAR FRAME (Grapple Or Industrial Skidder Only)

L 426-4640 FRAME, SF REAR, NO FENDER 2,806 NC.........................Includes: Single function rear frame,; For applications whererear tire protection is not requiredREQUIRES: 367-1846 Arch & Grapple, SF -OR-

476-6796 Industrial ArrangementL 393-8135 FRAME, SF REAR, GR FENDER 3,331 $1,905.........................

Includes: Single function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1846 Arch & Grapple, SF -OR-

476-6796 Industrial ArrangementL 426-4650 FRAME, DF REAR, NO FENDER 2,843 NC........................

Includes: Dual function rear frame; For applications where reartire protection is not requiredREQUIRES: 367-1849 Arch Boom & Grapple, DF -OR-

476-6796 Industrial ArrangementL 369-2493 FRAME, DF REAR, GR FENDER 3,369 $1,905.........................

Includes: Dual function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1849 Arch Boom & Grapple, DF -OR-


OPERATOR ENVIRONMENT

CAB (Must Select One)

L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable

L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1846 Arch & Grapple, SF -OR-

367-1849 Arch Boom & Grapple, DF -OR-476-6796 Industrial Arrangement





OPERATOR ENVIRONMENT (CONT.)

SCREENS (Must Select One)

L 435-4324 SCREENS, READY ONLY 18 NC................................Includes: Grab handle/Window retainer;Mounting positions ready for Window and Wiper Screens

L 378-9921 SCREENS, WINDOW & WIPER 176 $1,110............................Includes: Additional swing open screens for the 3 rear windowsprotecting windows and optional wipers; REQUIRES GLASS TOREMAIN INSTALLED AND IS NOT CERTIFIED FOR OPERATORPROTECTION WITHOUT GLASS INSTALLED

WATER TANKS

(Must Select One)

L 378-9923 WATER TANK, READY ONLY 109 NC............................Includes: Reinforced plate to cover the in-roof watertank position

L 375-2731 WATER TANK 220 $2,370.......................................Includes: Integrated in-roof water tank; Cab located hosewith nozzle; Pressure valve with gauge

BLADES/MOLDBOARDS

(Must Select One)

L 368-5677 BLADE, STANDARD 2,344 $2,490................................Includes: Overall width of 2678 mm (105.4") for standardtire coverage; Replaceable cutting edges

L 385-5004 BLADE, WIDE 2,559 $3,140.....................................Includes: Overall width of 3138 mm (123.5") for standardtire coverage; Replaceable cutting edges

C 476-6807 BLADE, OMISSION 0 NC.....................................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Lines routings from the main control valve to thefront frame and capped near the blade mounting location.

SERVICE INSTRUCTIONS

DECAL PACKAGE & LUBE GROUP (Must Select One)

426-4617 INSTRUCTIONS, ANSI 0 NC...................................Includes: Standard ANSI decal package required for all USAshipments





TIRES, RIMS, & WHEELS

Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.

FIRESTONE TIRES (Tubes ARE Included)

P 375-0679 TIRES, 35.5L-32 24PR FS 7,807 $17,710............................Provides width of 3703 mm (145.8")

P 375-2706 TIRES, 35.5L-32 24PR FS, NOAW 7,807 $17,640......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset



P 375-0694 TIRES,30.5L-32 26PR FS 2X RING 6,951 $9,550......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset




P 374-9855 TIRES, 30.5L-32 20PR FS 6,191 $780............................Provides width of 3386 mm (133.3")

P 375-0691 TIRES, 30.5L-32 20PR FS NOAW 6,191 $750.......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset





TIRES, RIMS, & WHEELS (CONT.)

FIRESTONE TIRES (Tubes NOT Included)

C 457-5772 TIRES, 35.5L-32 20PR FS 7,405 $9,770............................Provides width of 3703 mm (145.8")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 457-5774 TIRES, 35.5L-32 20PR FS NOAW 7,405 $9,690.......................Provides narrow overall width of 3533 mm (139.1")Tubes NOT included.Not approved for use with chains due to narrowoverall width offsetCONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 457-5768 TIRES, 30.5L-32 20PR FS 6,020 $-1,275............................Provides width of 3386 mm (133.3")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 457-5770 TIRES, 30.5L-32 20PR FS NOAW 6,020 $-1,305.......................Provides narrow overall width of 3216 mm (126.6")Tubes NOT included.Not approved for use with chains due to narrowoverall width offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

PRIMEX TIRES (Tubes ARE Included)

C 426-1333 TIRES, 35.5L-32 20PR PM 7,575 $9,000............................Provides width of 3703 mm (145.8")CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 426-1329 TIRES, 35.5L-32 20PR PM, NOAW 7,575 $8,920......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 426-1321 TIRES, 30.5L-32 20PR PM 2XRING 6,843 $3,580......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 426-1325 TIRES, 30.5L-32 20PR PM 6,191 $-1,355............................Provides width of 3386 mm (133.3")CONTACT LAGRANGE FACTORY FOR AVAILABILITY

C 426-1317 TIRES, 30.5L-32 20PR PM, NOAW 6,191 $-1,385......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwith offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY

NO RIMS -TIRES

P 174-7607 TIRES, ALLOWANCE FOR OMISSION 0 $-17,770........................Omits tires and rims.





PACKING

DOMESTIC PACKING

0P-1480 DOMESTIC TRUCK $129 NET..................................................

0P-1481 DOMESTIC TRUCK, TIRES REMOVED $230 NET.....................................




USE NO. lbs At FactoryOPTIONAL ATTACHMENTS

OTHER ATTACHMENTS

STARTING AIDS

P 367-4974 RECEPTACLE, JUMP START 2 $283...............................Includes: Remote mounted battery jump start posts; Does notrequire special jump start cable

P 374-3425 STARTING, COLD WEATHER 26 $585.............................Includes: Mounting brackets; Ether hoses and lines; Ethercanister NOT includedThe ether bottle is available seperately from Parts Distribution

OTHER

P 378-9922 LIGHTS, LED WORKING 18 $1,040.................................Includes: 8 LED lights (2 front, 4 sides, 2 rear) in additionto the 4 standard halogen lights (2 front, 2 rear)

L 375-2729 WIPERS, FRONT AND REAR 39 $690..............................Includes: Single wiper on front window and 2 wipers onrear windows with washer; Single speed

L 436-1770 STEERING, SECONDARY 84 $3,055................................Includes: Electric powered secondary steering pump

PACKING

MISCELLANEOUS

0P-0058 PACK, MISC SHIPMENTS $153 NET.............................................Required when ordering miscellaneous materialwithout ordering a machine.

FIELD INSTALLED ATTACHMENTS

Available for MISC orders only.

Use 0P-3512 for TOP LEVEL and 0P-0058 for PACKING.

Kits must be ordered NOT-INSTALLED.

No returns on Kit components or for parts removed.

C 472-0339 KIT, SCREENS, WINDOW & WIPER 350 $2,365 NI........................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Additional swing open screens for the 3 rearwindows protecting windows and optional wipers; REQUIRESGLASS TO REMAIN INSTALLED AND IS NOT CERTIFIED FOROPERATOR PROTECTION WITHOUT GLASS INSTALLED




Standard Equipment:











































ARCH/BOOM AND WINCH


L 367-1859 ARCH & GRAPPLE, SF 6,145 $36,200...............................Includes: Single function arch; 1.54 sq.m (16.6 sq.ft)continuous rotation grappleREQUIRES: 426-4591 Frame, SF Rear, No Fender -OR-

426-4590 Frame, SF Rear, Grapple FenderL 367-1850 ARCH BOOM & GRAPPLE, DF 7,122 $45,850..........................

Includes: Dual function arch and boom; 1.54 sq.m(16.6 sq.ft) continuous rotation grappleREQUIRES: 426-4592 Frame, DF Rear, No Fender -OR-


Includes Cable arch; Heavy duty 2-position fairlead; Highperformance hydraulic logging winch; Cable rear frame withheavy duty, extended coverage cable fenders; For cableapplications only where significant rear tire protectionis requiredREQUIRES: 454-8496 Cab, Encl Cable W/Whl SteeringCANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready

373-4613 Winch, Retrieval373-4614 Winch, Logging426-4591 Frame, SF Rear, No Fender426-4590 Frame, SF Rear, Grapple Fender426-4592 Frame, DF Rear, No Fender378-7300 Frame, DF Rear, Grapple Fender

C 476-4798 INDUSTRIAL ARRANGEMENT 339 $11,600............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/Whl Steering

426-4591 Frame, SF Rear No Fender -OR-426-4590 Frame, SF Rear Grapple Fender -OR-426-4592 Frame, DF Rear No Fender -OR-378-7300 Frame, DF Rear Grapple Fender

CANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready373-4613 Winch, Retrieval373-4614 Winch, Logging


L 373-4618 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-

476-6798 Industrial ArrangemtentL 373-4613 WINCH, RETRIEVAL 1,744 $17,140.................................







ARCH/BOOM AND WINCH (CONT.)

WINCH (Grapple Skidder Only) (Cont.)

L 373-4614 WINCH, LOGGING 1,880 $22,590..................................Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-


FRAME

REAR FRAME (Grapple or Industrial Skidder Only)

L 426-4591 FRAME, SF REAR NO FENDER 2,908 NC.........................Includes: Single function rear frame,; For applications whererear tire protection is not requiredREQUIRES: 367-1859 Arch & Grapple, SF -OR-

476-6798 Industrial ArrangementL 426-4590 FRAME, SF REAR GRAPPLE FENDER 3,434 $1,905.....................

Includes: Single function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1859 Arch & Grapple, SF -OR-

476-6798 Industrial ArrangementL 426-4592 FRAME, DF REAR NO FENDER 2,945 NC.........................

Includes: Dual function rear frame; For applications whererear tire protection is not requiredREQUIRES: 367-1850 Arch Boom & Grapple, DF -OR-

476-6798 Industrial ArrangementL 378-7300 FRAME, DF REAR GRAPPLE FENDER 3,471 $1,905.....................






L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1859 Arch & Grapple, SF

367-1850 Arch Boom & Grapple, DF476-6798 Industrial Arrangement









WATER TANKS

(Must Select One)



BLADES/MOLDBOARDS

(Must Select One)






426-4618 INSTRUCTIONS, ANSI 0 NC ...................................Includes: Standard ANSI decal package required for all USAshipments























FIRESTONE TIRES (Tubes NOT included)








C 426-1321 TIRES, 30.5L-32 20PR PM 2XRING 6,843 $3,580......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY



NO RIMS -TIRES






PACKING

DOMESTIC PACKING







OTHER ATTACHMENTS

STARTING AIDS



OTHER




PACKING

MISCELLANEOUS











Standard Equipment:











































ARCH/BOOM AND WINCH


L 367-1861 ARCH BOOM & GRAPPLE, DF 7,491 $57,900..........................Includes: Dual function arch and boom; 1.77 sq.m(19.0 sq.ft) continuous rotation grappleREQUIRES: 426-4592 Frame, DF Rear, No Fender -OR-


Includes Cable arch; Heavy duty 2-position fairlead; Highperformance hydraulic logging winch; Cable rear frame withheavy duty, extended coverage cable fenders; For cableapplications only where significant rear tire protectionis requiredREQUIRES: 454-8496 Cab, Encl Cable W/Whl SteeringCANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready

373-4613 Winch, Retrieval373-4614 Winch, Logging426-4592 Frame, DF Rear, No Fender378-7300 Frame, DF Rear, Grapple Fender

C 476-6800 INDUSTRIAL ARRANGEMENT 339 $11,600............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/whl Steering

426-4592 Frame, DF Rear No Fender378-7300 Frame, DF Rear Grapple Fender

CANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready373-4613 Winch, Retrieval373-4614 Winch, Logging


L 373-4618 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-

476-6800 Industrial ArrangementL 373-4613 WINCH, RETRIEVAL 1,744 $17,140.................................


476-6800 Industrial ArrangementL 373-4614 WINCH, LOGGING 1,880 $22,590..................................

Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-






FRAME

REAR FRAME (Grapple or Industrial Skidder Only)

L 426-4592 FRAME, DF REAR NO FENDER 2,945 NC.........................Includes: Dual function rear frame; For applications whererear tire protection is not requiredREQUIRES: 367-1861 Arch Boom & Grapple, DF -OR-







L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1861 Arch Boom & Grapple, DF -OR-





WATER TANKS

(Must Select One)







BLADES/MOLDBOARDS

(Must Select One)



















FIRESTONE TIRES (Tubes ARE Included) (Cont.)







FIRESTONE TIRES (Tubes NOT Included)












PRIMEX TIRES (Tubes ARE Included) (Cont.)




NO RIMS -TIRES


PACKING

DOMESTIC PACKING







OTHER ATTACHMENTS

STARTING AIDS



OTHER




PACKING

MISCELLANEOUS










CATERPILLAR MACHINE PRICE LIST 553C553C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory

Standard Equipment:

POWERTRAINEngine, CAT C6.6 with ACERT TechnologyEPA/ARB Tier 3 Certified EngineEU Stage IIIA Certified EngineFuel priming pump, electric

Air PrecleanerAir Cleaner, 2-stageCooling, cross-flow system with side byside cores and integrated airconditioner condenser


Hydrostatic drive hydraulic system2 Speed transmission, manually shiftedfor working and travel range

Heavy Duty Axles, CAT inboard planetaryapproved for odd size dual tires up to30.5 x 32 with 24.5 x 32 and wide tiresup to 73 x 44

Front differential lock, momentarycontrol

Rear differential lock, on/off controlFour-wheel enclosed disc service brakesDriveshafts, heavy duty and lubricatedUniversal joints, lubed for lifeParking brake, hydraulically released,spring applied


HYDRAULICSPowerDirect Plus SystemLoad Sense HydraulicsPumps, variable displacement main,attachment, hydrostatic, and fan

Main control valve, high performancemultifunctioning

Spin on filters, dual full inline returnCAT ToughGuard hoses

ELECTRICAL24-volt electrical systemAlarm, back-upAlternator, 130-ampBatteries, maintenance free (2-1000CCA)Working lights, dual bulbhalogen (6 total)

Main Disconnect SwitchStarter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warningProduct Link, ReadyIQAN MD3 full function control systemwith display

OPERATOR ENVIRONMENTEnclosed cab, OPS/FOPS/ROPS certifiedWindshield, reverse slope 3-pieceHVAC, high capacity systemWater tank, pressurizedSeat, air suspension with harnessseat belt

Headliner with dome lightFloormat, non-permeable and removableMirror, rear view24V to 12V converterPower ports, 12 volt (2)Beverage holders (2)Electro-hydraulic machine controlsAdvanced Operator ControlsOperator control adjustabilityTerrain Selection ModeCreep ModeRoad Steer Mode

Computerized Monitoring SystemIntrumentation, Guages:Engine coolant temperatureHydraulic oil temperatureFuel LevelSoot LevelEngine TachometerSaw Tachometer

Instrumentation, Warning Indicators:Parking brakeHigh/Low speed indicatorDifferential lock indicatorEngine warning indicatorEngine stop indicatorLow engine oil pressure indicatorEngine WarningWork Lights

Computerized diagnostics and monitoringEngine specific, quick accessinformation page including hours,coolant temperature, oil pressure,battery voltage, and speed

Hydraulic system specific, quickaccess information page includingattachment and auxiliary pumppressures, oil temperature, andfilter restriction information

Joystick configuration, quick accessinformation pages

Machine electronic componenttroubleshooting capability

Engine fault code logHydraulic system fault code logMachine fault code log

Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green

US-A D U. S. DOLLAR CURRENCY 553C-001


OTHER STANDARD EQUIPMENTHeavy Duty Frames, double walled boxsection front and rear

Center Hitch, dual tapered rollerbearing upper and lower

Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine andhydraulic

Fuel fill, ground levelHydraulic oil fill pump, ground levelelectric with quick coupler

Test ports, remote mounted bankAccess panels, hinged or removable




375-1135 553C WHEEL FELLER BUNCHER 25,979 $262,360...........................174 hp/110 inch wheelbase

0P-2818 553C MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.



CATERPILLAR MACHINE PRICE LIST 553CREF Ship Weight List Price


NOTE

One item must be selected from each categoryin the MANDATORY ATTACHMENT section of this price list.

POWERTRAIN

Engine

L 388-1878 ENG AR-TIER 3 CERTIFIED FLEX 0 NC............................FOR USE WITH: 553C machines sold into Tier 4

regulated countries

ELECTRICAL

PRODUCT LINK (Must Select One)Product Link enables the remote transmission of information

about the location, operation, and condition of yourequipment. Efficiently and effectively monitor performanceof your assets to help keep your jobs on schedule, maintainequipment condition, and reduce the costs of owning andoperating your fleet. Availability varies by country.Please contact your Cat marketing representative with questions.

L 351-9955 PRODUCT LINK, SATELLITE PL321 19 NC .........................Satellite Product Link uses a satellite network fortransmission of asset information including location,utilization and condition. For use in areas withpoor or no cellular coverage.Data from the Product Link is displayed in VisionLink.


Steering Control Selection

L 455-3862 STEERING, JOYSTICK GATHER ARM 195 NC......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, gather arm control,all open attachment function, and creep controls;Right joystick with lift, tilt, bunching controland momentary front differential

L 455-3863 STEERING, JOYSTICK FOOT PEDAL 195 $590.......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, all open attachmentfunction, and creep controls; Right joystick withlift, tilt, bunching control and momentary frontdifferential control; Left foot pedals for gatherarm control.





TIRES, RIMS, AND WHEELS


FIRESTONE TIRES

P 375-1128 TIRES,30.5L-32 20PR FS 2X RING 6,480 $3,980......................Includes mounting plate for 24.5L-32 outer duals to be attachedProvides width of 2966 mm (116.8")

P 375-1126 TIRES, 67-34 14 PR FS 6,080 $2,070..............................Provides standard width of 3222 mm (126.9")

P 375-1123 TIRES, 30.5L-32 20PR FS, NOAW 6,080 $-1,760......................Provides narrow overall width of 2980 mm (117.3")

P 375-1132 TIRES, 30.5L-32 20PR FS 6,080 $-1,760............................Provides width of 3140 mm (123.6")

P 375-1124 TIRES, 28L-26 16PR FS, NOAW 4,360 $-8,550.......................Provides narrow overall width of 2793 mm (110.0")

P 375-1125 TIRES, 28L-26 16PR FS 4,360 $-8,550..............................Provides standard width of 2920 mm (115.0")

C 375-1127 TIRES, 24.5L-32 16PR FS, NOAW 4,320 $-8,780......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2801 mm (110.3")

PRIMEX TIRES

C 389-0389 TIRES, 67-34 20PR PM 6,080 $11,130..............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 3222 mm (126.9")

C 387-5432 TIRES, 30.5L-32 20PR PM, NOAW 6,080 $-4,945......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2980 mm (117.3")

C 387-5431 TIRES, 30.5L-32 20PR PM 6,080 $-4,945............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides width of 3140 mm (123.6")

C 375-1097 TIRES, 28L-26 20PR PM, NOAW 4,360 $-7,000.......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2793 mm (110.0")

C 375-1098 TIRES, 28L-26 20PR PM 4,360 $-7,000.............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 2920 mm (115.0")





TIRES, RIMS, AND WHEELS (CONT.)

NO RIMS-TIRES


OTHER ATTACHMENTS

Radio

L 357-8159 RADIO, READY PACKAGE 0 NC................................Includes speakers, AM/FM Antennae and blank cover in headliner.

P 357-8158 RADIO, AM/FM/CD/XM-SATELLITE 3 $1,025.........................Includes Digital AM/FM/Sirius Satellite RadioReceiver with CD player, USB input, auxillary input;Speakers; AM/FM antennae; Sirius satellite radio antennawith protective cover (Subscription Required forSirius Service).

WORK TOOLS

Felling Heads

P 376-5449 SH-56B BUNCHING SAW 5,870 $71,740.............................5,870 $71,740 NI

Single Cut Capacity 53.3 cm (21.0");Accumulation Area 0.69 m (7.4 ft )

P 337-5523 SC-57 FELLING SAW 5,841 $71,010................................5,841 $71,010 NI


P 440-4884 SS-56 FELLING SAW 5,453 $68,240................................5,453 $68,240 NI

Single Cut Capacity 56.0 cm (22.0");Directional Fell Capacity 76.2 cm (30.0");Accumulation Area 0.37 m (4.0 ft )

P 434-4990 OMISSION, HEAD 0 NC......................................

Disc Selection

Must select one when ordering any Disc Saw Head.

P 372-3922 BUNCHING DISC, INLINE 1 PIECE 743 $1,285.........................Includes 18 x 2.25" bolt on shankless carbide teeth.REQUIRES: 376-5449 SH-56B Bunching Saw

P 385-9331 BUNCHING DISC, STAGGERED 719 NC...........................Includes 16 x 1.875" bolt on shankless carbide teethstaggered high and low providing overall cut of 2.25".REQUIRES: 376-5449 SH-56B Bunching Saw

P 330-4903 FELLING DISC, INLINE 1 PIECE 829 $840...........................Includes 16 x 2.25" bolt on shankless carbide teeth.REQUIRES: 337-5523 SC-57 Felling Saw -OR-

440-4884 SS-56 Felling Saw





WORK TOOLS (CONT.)

Disc Selection (Cont.)

P 351-0511 FELLING DISC, STAGGERED 757 NC.............................Includes 16 x 1.875" bolt on shankless carbide teethstaggard high and low providing overall cut of 2.25".REQUIRES: 337-5523 SC-57 Felling Saw -OR-


Mount Selection


P 384-8349 C SERIES MOUNTS, SH-56B 272 NC............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 376-5449 SH-56B Bunching Saw

P 379-4357 C SERIES MOUNTS, SC-57 430 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 337-5523 SC-57 Felling Saw

P 386-1383 C SERIES MOUNTS, SS-56 272 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 440-4884 SS-56 Felling Saw

PACKING

DOMESTIC PACKING







MISCELLANEOUS





Standard Equipment:











































ARCH/BOOM AND WINCH

ARCH/BOOM (Must Select)

L 390-7507 ARCH BOOM & GRAPPLE, DF 7,704 $66,590..........................Includes: Dual function arch and boom; 2.04 sq.m(22.0 sq.ft) continuous rotation grappleREQUIRES: 426-4630 Frame, DF Rear, No Fender

379-5751 Frame, DF Rear, Grapple FenderC 476-6802 INDUSTRIAL ARRANGEMENT 339 $12,200............................

CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/whl Steering

426-4630 Frame, DF Rear No Fender379-5751 Frame, DF Rear Grapple Fender

CANNOT BE USED WITH: 373-4620 Winch, Retrieval Ready373-4619 Winch, Retrieval

WINCH (Must Select One)

L 373-4620 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with RetrievalWinch not installed kitCANNOT BE USED WITH: 476-6802 Industrial Arrangement

L 373-4619 WINCH, RETRIEVAL 1,754 $17,140.................................Includes: Hydraulic retrieval winch; Fairleadroller subassemblyCANNOT BE USED WITH: 476-6802 Industrial Arrangement

FRAME

REAR FRAME (Must Select One)

L 426-4630 FRAME, DF REAR NO FENDER 3,149 NC.........................Includes: Dual function rear frame; For applications whererear tire protection is not requiredREQUIRES: 390-7507 Arch Boom & Grapple, DF -OR-





CAB (Must Select)

L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedals









WATER TANKS

(Must Select One)



BLADES/MOLDBOARDS

(Must Select One)





























PRIMEX TIRES (Tubes ARE Included) (Cont.)


NO RIMS -TIRES


PACKING

DOMESTIC PACKING







OTHER ATTACHMENTS

STARTING AIDS



OTHER




PACKING

MISCELLANEOUS











Standard Equipment:

POWERTRAINEngine, CAT C7 with ACERT TechnologyEPA/ARB Tier 4 Interim andEU Stage IIIB Certified Engine with CATClean Emissions Module (CEM)Fuel priming pump, electric

Air PrecleanerAir Cleaner, 2-stageCooling, cross-flow system with side byside cores and integrated airconditioner condenser and fuel cooler















Instrumentation, Warning Indicators:Parking brakeHigh/Low speed indicatorDifferential lock indicatorEngine warning indicatorEngine stop indicatorLow engine oil pressure indicatorRegeneration active indicatorRegeneration required indicatorRegeneration disabled indicatorEngine WarningWork Lights





Engine fault code log





Hydraulic system fault code logMachine fault code log



Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine,hydraulic, and CEM












NOTE


ELECTRICAL














FIRESTONE TIRES








PRIMEX TIRES











NO RIMS-TIRES


OTHER ATTACHMENTS

Radio



WORK TOOLS

Felling Heads








Disc Selection










WORK TOOLS (CONT.)




Mount Selection





PACKING

DOMESTIC PACKING







MISCELLANEOUS





Standard Equipment:

POWERTRAINEngine, CAT C7 with ACERT TechnologyEPA/ARB Tier 4 Interim andEU Stage IIIB Certified Engine with CATClean Emissions Module (CEM)Fuel priming pump, electric

Air PrecleanerAir Cleaner, 2-stageCooling, cross-flow system with side byside cores and integrated airconditioner condenser and fuel cooler















Instrumentation, Warning Indicators:Parking brakeHigh/Low speed indicatorDifferential lock indicatorEngine warning indicatorEngine stop indicatorLow engine oil pressure indicatorRegeneration active indicatorRegeneration required indicatorRegeneration disabled indicatorEngine WarningWork Lights





Engine fault code log





Hydraulic system fault code logMachine fault code log



Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine,hydraulic, and CEM












NOTE


ELECTRICAL














FIRESTONE TIRES








PRIMEX TIRES











NO RIMS-TIRES


OTHER ATTACHMENTS

Radio



WORK TOOLS

Felling Heads








Disc Selection










WORK TOOLS (CONT.)




Mount Selection





PACKING

DOMESTIC PACKING







MISCELLANEOUS




Documents

CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL … group 19...CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL SKIDDER Ship Weight List Price LAGRANGE, GA, USA lbs At Factory OTHER STANDARD