119
OTN/DWDM Systems Next Generation SDH Systems Access Systems Network Management System VoIP Devices Radio Communications Power Electronics

CATAOGUE - Iritel · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

  • Upload
    lynga

  • View
    227

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

OTN/DWDM SystemsNext Generation SDH SystemsAccess SystemsNetwork Management SystemVoIP DevicesRadio CommunicationsPower Electronics

CATALOGUE

Page 2: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

2

IRIT

EL

a.d

. B

EO

GR

AD

IR ITE LB E O G R A D

I R I T E L a . d . B E O G R A DBatajnički put 23, 11080 Beograd, Serbia General Manager: (+381 11) 3073 515, Sales: (+381 11) 3073 555Marketing: (+381 11) 3073 544, Exchange: (+381 11) 3073 400, Fax: (+381 11) 3073 434http://www.iritel.com, e-mail: [email protected]

IRITEL was founded in 1967.

Today, with 160 highly educated and skilled employees, IRITEL represents the leading company in the fields of communications and electronics in South-East Europe.

IRITEL has accreditation at Ministry of Science and Technological Development as research and development institute.

IRITEL has a Management System: SRPS ISO 9001:2015, SRPS ISO 14001:2015, SRPS OHSAS 18001:2008, SRPS ISO/IEC 27001:2014 and СОРС 9000/14.

The main areas of activity in communications and electronics:

Transmission systems

Switching systems

Radio communications

Power Electronics

Engineering

Page 3: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

TABLE OF CONTENTSOTN/DWDM Systems

OTP100G Optical Transport Platform OTN/DWDM up to 8 Tbit/s . . . . . . . . . . 4OTP10G Optical Transport Platform OTN/DWDM up to 800 Gbit/s . . . . . . . . . 8

Next Generation SDH Systems ODS2G5 SDH/SONET Multiservice Optical Digital Systems . . . . . . . . . . . . . . . 12OTS622 SDH/SONET Multiservice Optical Transport Systems . . . . . . . . . . . . 16WDM/CWDM/OADM Passive Optical Mux/Demux & Optical Add/Drop Multiplexers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Access SystemsFM-MSAN (FM8x2) MULTISERVICE ACCESS MULTIPLEXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

PIU 4 ISDN tributaries with U interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26PET 3 digital nx64 kbit/s Ethernet Bridge subscribers with 10/100BaseT or 100BaseFX interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28PN64 4 digital interfaces of X .21/V .11 type, n x 64 kbit/s . . . . . . . . . . . . . . 30PCO 10 digital G .703 64 kbit/s codirectional interfaces . . . . . . . . . . . . . . . 32PN64A 8 digital interfaces of V .24/V .28 type . . . . . . . . . . . . . . . . . . . . . . . . . . 34

FMOP FLEXIBLE MULTIPLEXER OPTICAL PLATFORM . . . . . . . . . . . . . . . . . . . . . 36FOP4/8/16 4/8/16xE1 + 2xFE over Fiber Multiplexer . . . . . . . . . . . . . . . . . . . . . 38FMTP FLEXIBLE MULTIPLEXER TDMoIP PLATFORM . . . . . . . . . . . . . . . . . . . . . . 40FTP4/8/16 4/8/16xE1 TDM over IP Multiplexer . . . . . . . . . . . . . . . . . . . . . . . . . . 42FMVP FLEXIBLE MULTIPLEXER VoIP PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . 44V5CAS PROTOCOL CONVERTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

ModemsPSH - SHDSL modem 4 x SHDSL, 4 x E1, 1 x Ethernet . . . . . . . . . . . . . . . . . . 50NTX iDSL modem with X .21 interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Ethernet Access and Interface Converter SeriesKGET TWO INTERFACE CONVERTORS Ethernet over E1 . . . . . . . . . . . . . . . . 54KGET8 INTERFACE CONVERTOR Ethernet over 8 x E1 . . . . . . . . . . . . . . . . . . 56

Ethernet Access and Managed Interface Converter SeriesKGET4/8/16 ETHERNET ACCESS INTERFACE CONVERTOR Ethernet over up to 16x E1 with GFP, VCAT and LCAS . . . . . . . . . . . . . . . . . 58KGET4/8/16S ETHERNET ACCESS INTERFACE CONVERTOR Ethernet over up to 16x E1 with GFP, VCAT, LCAS and Encryption . . . . . . 60KTP INTERFACE CONVERTOR SERIES TDM over IP . . . . . . . . . . . . . . . . . . . . . 62KTG INTERFACE CONVERTOR SERIES TDM over IP . . . . . . . . . . . . . . . . . . . . . 64GMC-2U Unmanaged Gigabit SFP Media Converter . . . . . . . . . . . . . . . . . . 66

06/09/2017

KFE INTERFACE CONVERTOR SERIES Ethernet over TDM . . . . . . . . . . . . . . . 68KG Universal TDM, E1 interface converter platform, fractional multiplexer, cross connect device with exchangeable user interface module and optional built-in AES encryption . . . . . . . . . . . . . . . 70

Managed Ethernet Switch SeriesSMH884 - FPX High Performance, 20 port, PoE enabled L2/L3 Fully Managed Ethernet Switch with Fast Hardware based Failover on Optical Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72MGE41/84/88/168F L2/L3 Managed Ethernet Switch with 16 x FE and 8 x E1 media converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74MGE168FS L2/L3 Managed Ethernet Switch with 16 x FE and 8 x E1 media converters with Encryption . . . . . . . . . . . . . . . . . . . . . . . . 76MGE88/168G Stackable Gigabit L2/L3 Managed Ethernet Switch with 16xFE, 4xGE and 8xE1 media converters . . . . . . . . . . . . . . . . . 78

Network Management SystemSUNCE+ Network Management System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80SUNCE-M Integrated Network Management System . . . . . . . . . . . . . . . . . . . . 82

VoIP DevicesSIPDAT SIP Interactive Voice Response Device . . . . . . . . . . . . . . . . . . . . . . . . . . 86IMG Media Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88IMG95 VoIP IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Radio CommunicationsCJ-1P Cellular Jammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92ARK3000 Antenna Distribution System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Power ElectronicsSDNU System for Remote Monitoring & Control of Power Electronic Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96SNN12 Power Supply System 54 Vdc / 3 x 7 .5 A . . . . . . . . . . . . . . . . . . . . . . . . .100SN12/110 Power Supply System 110 Vdc / 3 x 7 .5 A . . . . . . . . . . . . . . . . . . . . .104NN301/48 Vdc Small DC Power Supply System . . . . . . . . . . . . . . . . . . . . . . . . .108DC UPS Uninterruptible Power Supply with DC Output Voltage 300 Vdc 112SF25 Phase Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

Contract ManufacturingManufacturing and Assembly of Electronic Devices . . . . . . . . . . . . . . . . .116

Management SystemQuality Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

IRITEL reserves the right to make technical changes without notice 3

TA

BLES

OF

CON

TEN

TS

Page 4: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

4

Multiservice OTN/DWDM Platform Line Side Coherent Tunable CFP 100G DWDM Transceiver with Integrated CD Compensation

Universal Ports - Plugable Interfaces Any service – Any rate – Any port – Any λ

Universal Unit Single Unit Solution => Muxponder, Transponder, ODUk Cross connect, 3R Regeneration

Unif ied Platform for 80 Optical Channels DWDM multiplexers, optical amplifiers, dispersion compensation modules

Integrated Optical Transport Solution OTN SDH/SONET point-to-point DWDM Ethernet chain Fibre Channel ring Video mesh CPRI

OTP100G Optical Transport Platform OTN/DWDM up to 8 Tbit/s

OT

N/D

WD

M S

ys

tem

s

Page 5: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

5

OTP

100G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

Tbi

t/s

MAIN FEATURES 100G client/line interfaces are implemented

using CFP modules: OTN OTU4 Ethernet 100GE

10G client/line interfaces support Any service – Any rate – Any port – Any λ using XFP modules:

OTN OTU2/OTU2e Ethernet 10GE LAN, 10GE WAN SDH STM-64 SONET OC-192 Fibre Channel 8GFC, 10GFC CPRI Option 7

Client/line interfaces for bitrates up to 5 Gb/s are implemented using SFP modules as Any service – Any rate – Any port – Any λ:

ОТN OTU1 Ethernet GE, FE SDH STM-16/4/1, SONET OC-48/12/3 SAN: ESCON, FICON, Fibre Channel

FC-12/25/50/100/200/400 Video DVB-ASI, SD-SDI, HD-SDI CPRI Option 1, 2, 3, 4, 5 Bit-transparent protocol-independent

client services All SFP, SFP+, XFP and CFP interfaces are

universal and software configurable with fixed (1310nm, 1550nm, CWDM, DWDM) or tunable (DWDM) lasers

Support for client signals mapping into OTN ОDU0, ODUflex, ODU1, ODU2, ODU2e, ODU3, ODU4 structures

Multistage multiplexing Mapping into ODU1/OPU1 tributary slots of

n x 155.52 Mb/s capacity for efficient mapping of client signals at sub-ОDU0 granularity

OTN client signal mapping procedures AMP – Asynchronous Mapping Procedure BMP – Bit-synchronous Mapping Procedure GMP – Generic Mapping Procedure GFP – Generic Framing Procedure:

Framed and Transparent

Traffic grooming based on client signal requirements by using ODUflex, OTN VCAT (Vir-tual Concatenation) (OPUk-Xv, k=0, 1, 2), and/or n x 155Mb/ѕ tributary slots

ОТN non-blocking ODUk cross connect supports arbitrary mix of ODUk traffic for each muxponder/transponder unit, down to ODU0 granularity

FEC (Forward Error Correction) functionality for detecting and correcting transmission errors, supports: ITU-T G.709 FEC, ITU-T G.975.1 I.4 FEC and ITU-T G.975.1 I.7 FEC, SD-FEC (for coherent DWDM 100G line interfaces)

Transparent transfer of timing information for all client signals

Synchronization support SyncE PTP1588v2

Carrier class traffic protection is implemented at multiple levels and protocols on optical and electrical levels

DWDM multiplexing supports up to 80 channels of С-band wavelengths (192ТHz – 196ТHz) with 50GHz spacing

DWDM filters with low attenuation upgrade ports allow DWDM multiplex configuration in steps of 4, 8 or 40 wavelengths, up to 80 wave-lengths

The system can utilize active and/or passive optical filters. Active multiplexers are implemented using software configurable variable optical attenuators (VOA)

Use of EDFA and RAMAN optical amplifiers extends the maximum length of optical sections

Module for chromatic dispersion compensation is based on FBG (Fiber Bragg Gratings)

Up to 8 degrees ROADM connectivity DCN is implemented using GCC and ОЅС channels Support for in-system optical parameters

monitoring External monitoring points provide access for

OSA instrument measurements Performance monitoring Power supply

DC power supply -48V DC or -60V DC

EMS/NMS Software SUNCE+ Module ОТN Based on client-server architecture SNMPv3 based

Network Management System (NMS) Element Management System (EMS)

Page 6: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

6

OTP

100G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

Tbi

t/s

BASIC CONFIGURATION

OTP100Gs is compact 1U system

Applications: Implementing ОТN networks at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems and local ОDUk cross connect

OTP100G-C4 is four-slot subrack (shelf ) module

Applications: In building ОТN at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems, local ОDUk cross connect and building passive DWDM optical networks with local wavelength switching

OTP100G-C15 is 15-slot subrack (shelf ) with the basic application in building ОТN/DWDM networks with the maximum traffic capacity of the device is up to 80 wavelengths per pair of optical fibers, and with several hundreds of client interfaces

OTP100G-C14 is 14-slot subrack (shelf ) with the basic application in building ОТN/DWDM networks with the maximum traffic capacity of the device is up to 80 wavelengths per pair of optical fibers, and with several hundreds of client interfaces. This subrack has possibility for hard-ware protection of control and monitoring unit.

Applications OTP100G-C14/C15: Implementing all network configurations with all interface types, at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems, local ОDUk cross connect, building DWDM optical networks and local wavelength switching

MECHANICAL DESIGN

OTP100G-C15/C14 subrack: 586.2 mm x 437 mm x 298 mm

OTP100G-C4 subrack: 225 mm x 485.5 mm x 298.6 mm

OTP100Gs system: 44,4 mm x 437 mm x 280 mm

UNITS

ОТ-CMU unit is the system control-management unit

OT10G-3 unit has the following universal software-configurable client/line interfaces: 16 SFP and 3 10G XFP interfaces. OT10G-3 features muxponder, transponder, cross connect, synchronization and traffic protection functionalities

OT10G-4 is a transponder unit with 4 software-configurable client/line XFP interfaces. OT10G-4 features transponder, cross connect, synchroniza-tion and traffic protection functionalities

OT10G-12 is high density transponder unit with 12 software-configurable client/line SFP+/XFP interfaces. OT10G-12 features transponder, cross connect, synchronization and traffic protection functionalities

OT100G-1 is high density muxponder unit with 10 software-configurable client SFP+ interfaces and one line CFP 100G interfaces. OT100G-1 features muxponder, cross connect, synchronization and traffic protection functionalities

OT100G-2 is high density transponder unit with 2 CFP 100G interfaces (one client and one line). OT100G-2 features transponder, cross connect, sy-nchronization and traffic protection functionalities

рDWDM-4Cx and рDWDM-8Cx are passive units for DWDM multiplexing and demultiplexing of 4 or 8 optical signals. The upgrade ports enable capacity increase

DWDM-x are units for DWDM multiplexing and demultiplexing of 4 (DWDM-4Cx) or 8 (DWDM-8Cx) or 40 (DWDM-40CM, DWDM-40CD, DWDM-40HM, DWDM-40HD) optical signals with variable optical attenuator and photo detector for optical signal level adjustment. The upgrade ports enable capac-ity increase. Using interleaver unit DWDM-IL can be created multiplex of 80 wavelengths. DWDM-IL is used to combine and separate odd and even wave-lengths to create a 50GHz system.

ОМА-xy unit performs the function of amplification optical signal using ЕDFA and RAMAN amplifiers with Booster, Preamplifier and Inline applications

DCM-DxDy unit performs chromatic dispersion compensation based on FBG

ОТVOА-x unit has 4 or 8 variable optical attenuators and photo detectors for optical signal level adjustments

OPS-x unit implements of 1+1 on optical level protection of up to 4 or 8 optical signals

CFP INTERFACESOI.100G-CT coherent tunable DWDM 50GHz GRID

OI.100G-4x28 tunable DWDM 4x28Gb/s 50GHz GRID

OI.100G-ER4 40kmOI.100G-LR4 10km OI.100G-SR10 100m

Page 7: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

7

10GbE10GbE

10

10

G

10G

SDHSTM-4/1

SDHSTM-4/1

RouterVideo ondemand

Onlinegaming

DSLAM

IPTV

MSAN/DSLAM

Set top box

BroadbandInternet

VoIP

Terminal

MobileTV/application

2G/3G/WIMAXMobile Station

E1FE/GbE

FE/GbE

CCTV

NxGbE

FibreChannel

TV studioVideo

DVB

Data Storage

Ethernet / MPLS

Exchange

PBXOffice

MetroWiFi

InternetProvider

DSL

Residential

Voice

Data

Video

Video server

Server

PSTN

BusinessCustomer

Internet

VoIP

E-Li

ne

Softswitch

OTN/DWDM OTU4/OTU2/OTU1

OTN/DWDM OTU4/2/1

OTN/DWDM OTU4/OTU2/OTU1

SyncEPTP

10GbELAN/W

AN

OTU-2OTN/DWDM OTU2

NxFESTM-x

NxE1, E3

SDH STM - 4/1WDM/CWDM/OADM

SDH STM - 16WDM/CWDM/OADM

3G/3.5G/WIMAXMobile Station

100GE

100GE

Mobile Base Station

CPRICPRI

Mobile Base Station

Mobile Base Station

Mobile Base Station

CPRI

CPRI

APPLICATIONS IN TRANSPORT NETWORKS

The optical transport platform OTP100G is line of IRITEL’s devices for digital signal transmission over optical fibers, based on OTN and DWDM technologies, designed for implementation of local, metropolitan and regional networks of various configurations:

Point-to-point connections Linear add/drop networks Ring networks at different hierarchy

levels

For inter-connecting networks based on different technologies

Mesh networks Regeneration systems For local switching at ОDUk level For implementation of passive and

active optical networks For local switching at optical wavelength

level

The OTP100G enables inter-connecting networks based on different technologies: ОТN, SDH, Ethernet, SAN (ESCON, FICON, Fibre Channel), video, CPRI, bit-transparent protocol-independent client services, etc.

The OTP100G platform is designed and manufactured with modern modular technology, making it a very flexible solution for building, expanding and upgrading networks. It enables efficient and profitable delivery of telecommunications services.

OTP

100G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

Tbi

t/s

Page 8: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Multiservice OTN/DWDM Platform Universal Ports Any service – Any rate – Any port – Any λ

Universal Unit Single Unit Solution => Muxponder, Transponder, ODUk Cross connect, 3R Regeneration

Unified Platform for 80 Optical Channels DWDM multiplexers, optical amplifiers, dispersion compensation modules

Integrated Optical Transport Solution OTN SDH/SONET point-to-point DWDM Ethernet chain Fibre Channel ring Video mesh

8

OTP10G Optical Transport Platform OTN/DWDM up to 800 Gbit/s

OT

N/D

WD

M S

ys

tem

s

Page 9: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

9

OTP

10G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

00 G

bit/

s

MAIN FEATURES

10G client/line interfaces support Any service – Any rate – Any port – Any λ using XFP modules:

OTN OTU2/OTU2e/OTU1e/OTU2f/OTU1f Ethernet 10GE LAN, 10GE WAN SDH STM-64 SONET OC-192 Fibre Channel 8GFC, 10GFC

Client/line interfaces for bitrates up to 5 Gb/s are implemented using SFP modules as Any service – Any rate – Any port – Any λ:

ОТN OTU1 Ethernet GE, FE SDH STM-16/4/1, SONET OC-48/12/3 SAN: ESCON, FICON, Fibre Channel

FC-12/25/50/100/200/400 Video DVB-ASI, SD-SDI, HD-SDI Bit-transparent protocol-independent

client services All SFP and XFP interfaces are universal and

software configurable with fixed (1310nm, 1550nm, CWDM, DWDM) or tunable (DWDM) lasers

Support for client signals mapping into OTN ОDU0, ODUflex, ODU1, ODU2, ODU2e structures

Mapping into ODU1/OPU1 tributary slots of n x 155.52 Mb/s capacity for efficient mapping of client signals at sub-ОDU0 granularity

OTN client signal mapping procedures

AMP – Asynchronous Mapping Procedure BMP – Bit-synchronous Mapping

Procedure GMP – Generic Mapping Procedure GFP – Generic Framing Procedure:

Framed and Transparent Traffic grooming based on client signal

requirements by using ODUflex, OTN VCAT (Vir-tual Concatenation) (OPUk-Xv, k=0, 1, 2), and/or n x 155Mb/ѕ tributary slots

ОТN non-blocking ODUk cross connect supports arbitrary mix of ODUk traffic for each muxponder/transponder unit, down to ODU0 granularity

FEC (Forward Error Correction) functionality for detecting and correcting transmission errors, supports: ITU-T G.709 FEC, ITU-T G.975.1 I.4 FEC and ITU-T G.975.1 I.7 FEC

Transparent transfer of timing information for all client signals

Synchronization support SyncE PTP1588v2

Carrier class traffic protection is implemented at multiple levels and protocols on optical and electrical levels

DWDM multiplexing supports up to 80 channels of С-band wavelengths (192ТHz – 196ТHz) with 50GHz spacing

DWDM filters with low attenuation upgrade ports allow DWDM multiplex configuration in steps of 4 or 8 wavelengths, up to 80 wavelengths

The system can utilize active and/or passive optical filters. Active multiplexers are implemented using software configurable variable optical attenuators (VOA)

Use of EDFA and RAMAN optical amplifiers extends the maximum length of optical sections

Module for chromatic dispersion compensation is based on FBG (Fiber Bragg Gratings)

Up to 8 degrees ROADM connectivity

DCN is implemented using GCC and ОЅС channels

Support for in-system optical parameters monitoring

External monitoring points provide access for OSA instrument measurements

Performance monitoring

100G ready platform

EMS/NMS Software

SUNCE+ Module ОТN

Based on client-server architecture

SNMPv3 based Network Management System (NMS) Element Management System (EMS)

Page 10: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

10

OTP

10G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

00 G

bit/

sBASIC CONFIGURATION

OTP10Gs is compact 1U system with:

up to 2 OTN ОТU2/2e/1e/2f/1f, up to 8 OTN OTU1, up to 2 universal 10G clients, up to 16 universal clients with bitrates

from 16Mb/s to 5Gb/s eachApplications: Implementing ОТN networks at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems and local ОDUk cross connect

OTP10G-C4 is four-slot subrack (shelf ) module with:

up to 12 OTN ОТU2/2e/1e/2f/1f, up to 16 OTN OTU1, up to 12 universal 10G clients, up to 32 universal clients with bitrates

from 16Mb/s to 5Gb/s each, up to 16 DWDM channels add/drop in

two directionsApplications: In building ОТN at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems, local ОDUk cross connect and building passive DWDM optical networks with local wavelength switching

OTP10G-C15 is 15-slot subrack (shelf ) with the basic application in building ОТN/DWDM networks with the maximum traffic capacity of the device is up to 80 wavelengths per pair of optical fibers, and with several hundreds of client interfaces

A p p l i c at i o n s : I m p l e m e n t i n g a l l n e t wo r k configurations with all interface types, at different hierarchy levels, inter-connecting networks based on different technologies, regeneration systems, local ОDUk cross connect, building DWDM optical networks and local wavelength switching

MECHANICAL DESIGN

OTP10G-C15 subrack:

Dimensions (H x W x D) 586.2 mm x 437 mm x 298 mm

OTP10G-C4 subrack:

Dimensions (H x W x D) 225 mm x 485.5 mm x 298.6 mm

OTP10Gs system:

Dimensions (H x W x D) 44,4 mm x 437 mm x 280 mm

UNITS

ОТ-CMU unit is the system control-management unit

OT10G-3 unit has the following interfaces: 16 universal software-configurable client/line SFP interfaces and 3 universal software-configurable client/line 10G XFP interfaces. OT10G-3 features muxponder, transponder, cross connect, synchronization and traffic protection functio-nalities

OT10G-4 is a transponder unit with 4 software-configurable client/line XFP interfaces. OT10G-4 features transponder, cross connect, synchroniza-tion and traffic protection functionalities

OT10G-12 is high density transponder unit with 12 software-configurable client/line SFP+/XFP interfaces. OT10G-12 features transponder, cross connect, synchronization and traffic protection functionalities

рDWDM-4Cx and рDWDM-8Cx are passive units for DWDM multiplexing and demultiplexing of 4 or 8 optical signals. The upgrade ports enable capacity increase

DWDM-4Cx and DWDM-8Cx are units for DWDM multiplexing and demultiplexing of 4 or 8 optical signals with variable optical attenuator and photo detector for optical signal level adjustment. The upgrade ports enable capacity increase

ОМА-x y unit per forms the func t ion of amplification optical signal using ЕDFA and RAMAN amplifiers with Booster, Preamplifier and Inline applications

DCM-DxDy unit performs chromatic dispersion compensation based on FBG

ОТVOА-x unit has 4 or 8 variable optical attenuators and photo detectors for optical signal level adjustments

OPS-x unit implements of 1+1 protection of up to 4 or 8 optical signals

XFP INTERFACES

OI.10G-x 1310nm, 1550nm 10-80km

OI.D10G-x-CHx DWDM band 40-88km

OI.D10G-x-CHT tunable DWDM 40-80km

POWER SUPPLY

DC power supply -48V DC or -60V DC

Page 11: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

11

OTP

10G

Opt

ical

Tra

nspo

rt P

latf

orm

OTN

/DW

DM

up

to 8

00 G

bit/

s

10GbE10GbE

10

10

G

10G

SDHSTM-4/1

SDHSTM-4/1

RouterVideo ondemand

Onlinegaming

DSLAM

IPTV

MSAN/DSLAM

Set top box

2G/3G/WIMAXMobile Station

BroadbandInternet

VoIP

Terminal

MobileTV/application

C

E1FE/GbE

FE/GbE

CCTV

NxGbE

FiberChannel

TV studioVideo

DVB

Data Storage

Ethernet / MPLS

Exchange

PBXOffice

MetroWiFi

InternetProvider

DSL

Residential

Voice

Data

Video

Video server

Server

PSTN

BusinessCustomer

Internet

VoIP

E-Li

ne

Softswitch

OTN/DWDM OTU-2

OTN/DWDM OTU-1

OTN/DWDM OTU-2

SyncEPTP

10GbE

LAN/WAN

OTU-2OTN/DWDM OTU-2

NxFESTM-x

NxE1, E3

SDH STM - 4/1WDM/CWDM/OADM

SDH STM - 16WDM/CWDM/OADM

3G/3.5G/WIMAXMobile Station

APPLICATIONS IN TRANSPORT NETWORKS

The optical transport platform ОТP10G is line of IRITEL’s devices for digital signal transmission over optical fibers, based on OTN and DWDM technologies, designed for implementation of local, metropolitan and regional networks of various configurations:

Point-to-point connections Linear add/drop networks Ring networks at different hierarchy

levels

For inter-connecting networks based on different technologies

Mesh networks Regeneration systems For local switching at ОDUk level For implementation of passive and

active optical networks For local switching at optical

wavelength level

The OTP10G enables inter-connecting networks based on different technologies: ОТN, SDH, Ethernet, SAN (ESCON, FICON, Fibre Channel), video, bit-transparent protocol-independent client services, etc.

The OTP10G platform is designed and manufactured with modern modular technology, making it a very flexible solution for building, expanding and upgrading net-works. It enables efficient and profitable delivery of telecommunications services.

Page 12: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

12

ODS2G5 SDH/SONET Multiservice Optical Digital Systems

Ne

xt

Ge

ne

rati

on

SD

H S

ys

tem

s

Next generation SDH Optical Digital Systems for STM-16/4/1, E1, E3, 10/100 BaseTx, 100 BaseFx, 1000 BaseX, 1000 BaseT services

Add/drop, cross-connect and terminal multiplexer

Ethernet over SDH, GFP/VCAT/LCAS technologies

Compact and flexible SDH equipment, easily expandable from small to full capacity, for metro and access network applications

Network management system SUNCE-M or SNMP-based management

Page 13: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

OTS

S4ADM-2

μP bus

Telecom bus

GFP Mapper

Ethernet PHY

LOCAL CROSS-CONNECT MATRIX 4 x 4 STM-4

S16LE-2

CROSS-CONNECTMATRIX

40 x 40 STM-4(working)

SDH E3Mapper

Working unit

STI2-63

GB Eth PHY

GFP Mapper

Ethernet PHY

GB Eth PHY

GFPMapper

Protecting unit

μP b

lock

OH

A b

lock

DCC

blo

ck

SYN

C bl

ock

(loca

l)

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #1

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #2

SDH E1Mapper

E3 L

ine

inte

rfac

e #1

E3 L

ine

inte

rfac

e #2

E3 L

ine

inte

rfac

e #3

10/1

00 b

Txlin

k #1

10/1

00 b

Txlin

k #2

10/1

00 b

Txlin

k #3

10/1

00 b

Txlin

k #4

100

bFx

link

#1

E1 L

ine

inte

rfac

e #1

E1 L

ine

inte

rfac

e #2

E1 L

ine

inte

rfac

e #2

1

SDH E1Mapper

E1 L

ine

inte

rfac

e #1

E1 L

ine

inte

rfac

e #2

E1 L

ine

inte

rfac

e #6

3

S16LE-2 S4ADM-2

STM

-16/

4/1

Opt

ical

inte

rfac

e #1

STM

-16/

4/1

Opt

ical

inte

rfac

e #2

STM

-4/1

Opt

ical

inte

rfac

e #3

STM

-4/1

Opt

ical

inte

rfac

e #4

10/1

00/1

000

GB

Eth

link

#1

10/1

00/1

000

GB

Eth

link

#2

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #1

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #2

SYN

C bl

ock

(wor

king

)

10/1

00/1

000

GB

Eth

link

#1

10/1

00 b

Txlin

k #1

10/1

00 b

Txlin

k #2

10/1

00 b

Txlin

k #3

10/1

00 b

Txlin

k #4

100

bFx

link

#1

10/1

00 b

Txlin

k #5

Wor

king

uni

t

Wor

king

uni

tW

orki

ng u

nit

Wor

king

uni

tPr

otec

ting

unit

Prot

ectin

g un

it

10/1

00/1

000

GB

Eth

link

#1

10/1

00/1

000

GB

Eth

link

#2

GFPMapper

13

OD

S2G

5 S

DH

/SO

NET

Mul

tiser

vice

Opt

ical

Dig

ital S

yste

ms

Basic configuration

ODS2G5C3 configuration for 3 units:

up to: 4 x STM-16, 18 x STM-4/1, 21 x 2 Mbit/s, 3 x 34 Mbit/s and 4 x 10/100 BaseTx, 1 x 100 BaseFx, 9 x 1000 BaseT/1000 BaseX

ODS2G5C8 configuration for 8 units:

up to: 4 x STM-16, 20 x STM-4/1, 273 x 2 Mbit/s, 3 x 34 Mbit/s and 13 x 10/100 BaseTx, 2 x 100 BaseFx, 10 x 1000 BaseT/1000 BaseX

ODS2G5C12 configuration for 12 units:

up to: 6 x STM-16, 30 x STM-4/1, 273 x 2 Mbit/, 3 x 34 Mbit/s and 20 x 10/100 BaseTx, 3 x 100 BaseFx, 15 x 1000 BaseT/1000 BaseX (cross connect card protection, sync module protection, E1 line protection)

Applications

Point-to-point fiber optic links

Linear fiber optic networks, providing add-and-drop capability

All types of fiber rings and complex network structure at STM-16, STM-4 and STM-1 level

Local cross-connect at VC12 (2 Mbit/s) , VC3 (34 Mbit/s) and VC4 levels

Main features

Multiservice SDH optical digital system for voice and data transmission of up to STM-16 (2.5 Gbit/s)

Optical line interface 2.5 Gbit/s, 622 Mbit/s and 155 Mbit/s provides t ransmiss ion over single-mode optical fiber at 1310 nm for section length of up to 50 km, or at 1550 nm for section length of up to 120 km

Plug-in SFP optical or electrical transceivers, provide STM-16, STM-4 or STM-1 interface configuration on the same unit

WDM option - two way single fiber transmission (1310 and 1550 nm), passive optical filter

C W D M o p t i o n - w a v e l e n g t h d i v i s i o n multiplexing (1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 nm +1310 nm), passive optical filters

PDH tributary interfaces for 2 Mbit/s and 34 Mbit/s

Full non blocking cross-connect matrix, capac-ity 24.88 Gbit/s (160 x 160 VC4) up to VC12 level, S4ADM-2 unit or 44.78 Gbit/s (288 x 288 VC4) up to VC12 level, S16ADM-2 unit

Ether net over SDH v ia GFP/VCAT/LCAS technologies

Static and dynamic Ethernet traffic capacity adjustment, LCAS procedure

Line protection at multiplex section, 1+1 MSP, higher order path or lower order path protection (VC12, VC3, VC4), subnetwork protection SNCP

Advanced fault diagnosis (integrated BER tester, etc)

Protection configurations (working and reserve modules or units) are possible for cross-connect matrix, synchronization modules, STM-16, STM-4 and STM-1 interfaces and tributary units STI2-63 (1:N 2 Mbit/s tributary protection)

Unit’s configuration parameters are stored in backplane memory, that enable “plug & play” change of units

SONET option (OC-48/OC-12/OC-3, T1, T3) is software configurable

ODS2G5 has been designed in compliance with new ITU-T recommendation and ETSI standards

ODS2G5 functional block diagram

Page 14: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Exchange

Exchange

Exchange

Exchange

ODS2G5C12

ODS2G5C8

ODS2G5C8

ODS2G5C8

OTS622s-21E1

OTS2G5C3

STM-16ring

STM-4ring

Ethernetover SDH

ODS2G5C3

OTS622-84E1

OTS622-84E1

OTS622s-21E1

STM-16ring

STM

-4 li

nk

STM

-1 lin

k

STM-4 link

Video distribution

Mobilebase station

Data storage

OTS622-84E1

14

Control and monitoring

Integrated network management system SUNCE-M provides continuous management of ODS2G5 and all other IRITEL’s SDH and PDH equipment (OTS622, ODS155, FM-MSAN, ...)

The computer (PC) in management operations centre is connected to one network element (ODS2G5) using Ethernet 10/100BaseTx or RS232 interface (F interface)

NMS interconnections of collocated IRITEL’s devices using Q2 (RS485) or Q2Et (10/100BaseTx) interfaces

NMS interconnection of remote IRITEL’s SDH equipment using DCC channels (192 kbit/s, 576 kbit/s)

Additional G.703 2 Mbit/s interfaces used for connections of independent subnetworks to one centralized management system SUNCE-M

SNMP northbound and southbound interfaces

SNMP MIB

Control and monitoring using standard SNMP viewer

Power supply

DC power supply –48 V DC or –60 V DC

Mechanical design

Unit’s dimension: 277 x 175 mm

Module’s dimension

ODS2G5C3 (3 units): 150 x 436.6 x 238 mm

ODS2G5C8 (8 units): 400 x 436.6 x 238 mm

ODS2G5C12 (12 units): 482 x 436.6 x 238 mm

ETSI or 19” cabinet’s dimension: 2200 x 600 x 300 mm

ODS2G5 application in complex STM-16 network OD

S2G

5 S

DH

/SO

NET

Mul

tiser

vice

Opt

ical

Dig

ital S

yste

ms

Page 15: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

15

T E C H N I C A L D A T A

OTS main unit

TMN interface RS232/V.24, 10/100 BaseTX, Q2 (RS485), Q2Et (10/100 BaseTX), 2 Mbit/s / G.703 EOW telephone interface Z (2-wire) DCC (F1 or E2) interface 64 kbit/s, V11 Performance management G.826, G.783

21 x 2 Mbit/s interface G.703 (120/75 Ω) Mapping/multiplexing G.707 at paths: VC12/TU-12/TUG-2/TUG-3/VC4/AU-4/AUG/STM-N

3 x 34 Mbit/s interface G.703 (75 Ω) Mapping/multiplexing G.707 at paths: VC3/TU3/TUG-3/VC4/AU-4/AUG/STM-N

Ethernet interface 4 x10/100 BaseTx (IEEE 802.3) 1 x100 BaseFx (IEEE 802.3) Mapping GFP-F G.7041 (n x VC12, n x VC3 or VC4) Capacity adjustment, LCAS static, dynamic

2 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825Power consumption max 30 W

OTS-G main unit Same as OTS except:

Ethernet interface 1x1000 BaseT/BaseX (IEEE 802.3)

S4ADM-2 unitCross-connect non blocking matrix capacity 160x160 VC4 (up to VC12 level)Synchronization according to G.813

2 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825Ethernet interface 5 x10/100 BaseTx (IEEE 802.3) 1 x100 BaseFx (IEEE 802.3) 1 x1000 BaseT/1000 BaseX (IEEE 802.3) Power consumption max 30 W

S4LI-4 unit 4 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825Ethernet interface 2 x10/100 BaseTx (IEEE 802.3) 2 x1000 BaseT/1000 BaseX (IEEE 802.3)Power consumption max 27 W

S16LI-8 unitup to 2 x 2.5 Gbit/s interface G.957, G.703

up to 8 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825Power consumption max 28 W

S16LE-2 unitup to 2 x 2.5 Gbit/s interface G.957, G.703

up to 4 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825

Ethernet interface 4 x1000 BaseT/1000 BaseX (IEEE 802.3)Power consumption max 30 W

STI2-63 tributary unit63 x E1 interface G.703 (120/75 Ω)Jitter and wander G.823Mapping/multiplexing G.707 at paths: VC12/TU-12/TUG-2/TUG-3/VC4/AU-4/AUG/STM-NPower consumption max 25 W

Plug-in SFP transceiversSTM-16: ITU-T G.957

OI.S16A LC/FPLD 1310 nm/15 kmOI.L16A LC/FPLD 1310 nm/48 kmOI.S16B LC/FPLD 1550 nm/15 kmOI.L16B LC/FPLD 1550 nm/80 km

STM-4: ITU-T G.957 OI.S4A LC/FPLD 1310 nm/15 kmOI.L4A LC/DFBLD 1310 nm/48 kmOI.L4B LC/DFBLD 1550 nm/80 kmOI.L4B1 LC/DFBLD 1550 nm/120 km

STM-1: ITU-T G.957 OI.S1A1 LC/FPLD 1310 nm/15 kmOI.S1A LC/FPLD 1310 nm/40 kmOI.S1B LC/DFBLD 1550 nm/93 kmOI.S1 electrical CMI/12.7 dB at 78 MHz

FE: IEEE 802.3 OI.S1A1 LC/FPLD 1310 nm/15 kmOI.S1A LC/FPLD 1310 nm/40 kmOI.S1B LC/DFBLD 1550 nm/93 km

GbE: IEEE 802.3 OI.GbE-AS LC/MQW FPLD 1310 nm/10 kmOI.GbE-A LC/DFBLD 1310 nm/40 kmOI.GbE-ZX LC/DFBLD 1550 nm/60 kmEI.GbE-RJ45 RJ45/CAT5/CATe/CAT6/100 m

Traffic protectionLine protection 1+1 MSPPath protection VC12, VC3, VC4Subnetwork protection SNCP

OD

S2G

5 S

DH

/SO

NET

Mul

tiser

vice

Opt

ical

Dig

ital S

yste

ms

Page 16: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

16

Next generation SDH Optical Transport Systems for STM-4/1, E1, E3, 10/100BaseTx, 100BaseFx, 1000BaseX, 1000BaseT services

Add/drop, terminal multiplexer and cross-connect

Ethernet over SDH, GFP/VCAT/GFP/LCAS technologies

Compact, flexible and cost-effective SDH equipment for metro and access network applications

Network management system SUNCE-M or SNMP-based management

OTS622 SDH/SONET Multiservice Optical Transport Systems

Ne

xt

Ge

ne

rati

on

SD

H S

ys

tem

s

Page 17: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

17

Basic configurations OTS622s compact 1U system, options:

OTS622s-21E1: 2 x STM-4/1, 21 x 2 Mbit/s

OTS622s-21E1/E3: 2 x STM-4/1, 21 x 2 Mbit/s, 3 x 34 Mbit/s

FE-5 module for OTS622s-21E1 or OTS622s-21E1/E3: 4 x 10/100BaseTx, 1 x 100BaseFx

GbE-2 module for OTS622s-21E1 or OTS622s-21E1/E3: 1 x 1000BaseX/BaseT

OTS622-21E1 “two slots - two OTS/OTSG units”: 2 x (2 x STM-4/1), 2 x (21 x 2 Mbit/s) ,

2 x (3 x 34 Mbit/s), 2 x [(4 x 10/100BaseTx, 1 x 100BaseFx) or (1 x 1000BaseX/T)]

OTS622-84E1 “two slots system”: 2 x STM- 4/1, 84 x 2 Mbit/s

(OTS/OTSG unit 21 x 2 Mbit/s and one tributary unit 63 x 2 Mbit/s), 3 x 34 Mbit/s, (4 x 10/100BaseTx, 1 x 100BaseFx) or (1 x 1000BaseX/T)

Applications

Point-to-point fiber optic transmission

Linear fiber optic networks, providing add-and-drop capability

Add-drop fiber ring at STM-1 or STM-4 level

Connecting to the same or higher order SDH networks

Local cross-connect at VC12, VC3 and VC4 levels

Main features

Multiservice SDH optical transport system for voice and data transmission at STM-1 (155 Mbit/s) and STM-4 (622 Mbit/s) level

Optical line interfaces 622 Mbit/s and 155 Mbit/s provide transmission over single-mode optical fiber at 1310 nm for section length of up to 50 km, or at 1550 nm for section length of up to 120 km

Plug-in SFP optical or electrical tranceivers, provide STM-1 or STM-4 interfaces configurations on the same unit

WDM option-single fiber transmission (1310 and 1550 nm), passive optical filter

C W D M o p t i o n - w a v e l e n g t h d i v i s i o n multiplexing (1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 nm +1310 nm), passive optical filter

Full non blocking cross-connect matrix, capacity 16x16 VC4 (2.5 Gb/s) up to VC12 level

PDH tributary interfaces for 2 Mbit/s and 34 Mbit/s

Ethernet over SDH via GFP/VCAT/LCAS technologies

Static and dynamic Ethernet traffic capacity adjustment, LCAS procedure

Line protection at multiplex section, 1+1 MSP, higher order path or lower order path protection (VC12, VC3, VC4), subnetwork protection SNCP

Advanced fault diagnosis (integrated BER tester, etc)

Unit’s configuration parameters are stored in backplane memory, which enables “plug & play” change of units

SONET option (OC-12/OC-3, T1, T3) is software configurable

OTS622 has been designed in compliance with new ITU-T recommendation and ETSI standards

OTS

622

SD

H/S

ON

ET M

ultis

ervi

ce O

ptic

al T

rans

port

Sys

tem

s

OTS/OTS-G

Telecom bus

GFP Mapper

LOCAL CROSS-CONNECT MATRIX 4 x 4 STM-4

SDH E3Maper

STI2-63

OH

A b

lock

DCC

blo

ck

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #1

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #2

SDH E1Mapper

E3 L

ine

inte

rfac

e #1

E3 L

ine

inte

rfac

e #2

E3 L

ine

inte

rfac

e #3

E1 L

ine

inte

rfac

e #1

E1 L

ine

inte

rfac

e #2

E1 L

ine

inte

rfac

e #2

1

SDH E1Mapper

E1 L

ine

inte

rfac

e #1

E1 L

ine

inte

rfac

e #2

E1 L

ine

inte

rfac

e #6

3

SY

NC

bloc

k(lo

cal)

Ethernet PHY

10/1

00 b

Txlin

k #1

10/1

00 b

Txlin

k #2

10/1

00 b

Txlin

k #3

10/1

00 b

Txlin

k #4

100

bFx

link

#1

GFP Mapper

LOCAL CROSS-CONNECT MATRIX 4 x 4 STM-4

SDH E3Maper

OH

A b

lock

DCC

blo

ck

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #1

STM

-4/S

TM-1

Opt

ical

inte

rfac

e #2

SDH E1Mapper

E3 L

ine

inte

rfac

e #1

E3 L

ine

inte

rfac

e #2

E3 L

ine

inte

rfac

e #3

E1 L

ine

inte

rfac

e #1

E1 L

ine

inte

rfac

e #2

E1 L

ine

inte

rfac

e #2

1

SY

NC

bloc

k(lo

cal)

FE-5 module

Ethernet PHY

10/1

00 b

Txlin

k #1

10/1

00 b

Txlin

k #2

10/1

00 b

Txlin

k #3

10/1

00 b

Txlin

k #4

100

bFx

link

#1

GB Ethernet PHY

10

00 b

Tlin

k #1

1000

bX

link

#1

GbE-2 moduleOTS622s-21E1/E3

OTS622-84E1 block diagram

OTS622s-21E1/E3 block diagram

Page 18: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

OTS622 application in complex STM-4 network

Exchange

Exchange

Exchange

Exchange

Exchange

Exchange

ODS2G5C8

OTSS622s-21E1

OTSS622-84E1

STM-4

STM-4OTSS622-84E1

ODS2G5C8

Ethernetover SDH

OTSS622-84E1

OTSS622-84E1

OTSS622s-21E1/E3+FE-5 module

18

Control and monitoring

Integrated network management system SUNCE-M provides continuous management of OTS622 and all other IRITEL’s SDH and PDH equipment (ODS2G5, ODS155, FM-MSAN ...).

The computer (PC) in management operations centre is connected to one network element (OTS622) using Ethernet 10/100BaseTx or RS232 interface (F interface).

NMS interconnections of collocated IRITEL’s devices using Q2 (RS485) or Q2Et (10/100BaseTx) interfaces

NMS interconnection of remote IRITEL’s SDH equipment using DCC channels (192 kbit/s, 576 kbit/s)

Additional G.703 / 2 Mbit/s interfaces used for connections of several independent subnetwork on one centralized management system SUNCE-M.

SNMP northbound and southbound interfaces

SNMP MIB Control and monitoring using standard SNMP

viewer

Power supply

DC power supply –48 V DC or –60 V DC

Optional 230 V AC internal power supply for OTS622s systems

Mechanical design

Unit: 20 x 277 x 175 mm (H x W x D)

Mechanical modules

OTS622s: 44.5 x 436.6 x 238 mm OTS622-21E1: 150 x 436.6 x 238 mm OTS622-84E1: 150 x 436.6 x 238 mm

ETSI or 19”cabinet: 2200 x 600 x 300 mm

OTS

622

SD

H/S

ON

ET M

ultis

ervi

ce O

ptic

al T

rans

port

Sys

tem

s

Page 19: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

19

T E C H N I C A L D A T A

OTS main unit

TMN interface RS232/V.24, 10/100 BaseTX, Q2 (RS485), Q2Et (10/100 BaseTX), 2 Mbit/s / G.703 EOW telephone interface Z (2-wire) DCC (F1 or E2) interface 64 kbit/s, V11 Performance management G.826, G.783

21 x 2 Mbit/s interface G.703 (120/75 Ω) Mapping/multiplexing G.707 at paths: VC12/TU-12/TUG-2/TUG-3/VC4/AU-4/AUG/STM-N

3 x 34 Mbit/s interface G.703 (75 Ω) Mapping/multiplexing G.707 at paths: VC3/TU3/TUG-3/VC4/AU-4/AUG/STM-N

Ethernet interface 4 x10/100 BaseTx (IEEE 802.3) 1 x100 BaseFx (IEEE 802.3) Mapping GFP-F G.7041 (n x VC12, n x VC3 or VC4) Capacity adjustment, LCAS static, dynamic

2 x 155/622 Mbit/s interface G.957, G.703 Jitter and wander G.825Power consumption max 30 W

OTS-G main unit Same as OTS except:

Ethernet interface 1x1000 BaseT/BaseX (IEEE 802.3)

STI2-63 tributary unit63 x E1 interface G.703 (120/75 Ω)Jitter and wander G.823Mapping/multiplexing G.707 at paths: VC12/TU-12/TUG-2/TUG-3/VC4/AU-4/AUG/STM-NPower consumption max 25 W

OTS622s-21E1 compact 1U system same functionalities as OTS unit, but without interfaces for 34 Mbit/s and Ethernet

OTS622s-21E1/E3 compact 1U system same functionalities as OTS unit, but without interfaces for Ethernet

FE-5 Fast Ethernet interfaces module for OTS622s systems Ethernet interface 4 x10/100 BaseTx (IEEE 802.3) 1 x100 BaseFx (IEEE 802.3)

GbE-2 Gigabit Ethernet interface module for OTS622s systems Ethernet interface 1x1000 BaseT/BaseX (IEEE 802.3)

Traffic protectionLine protection 1+1 MSPPath protection VC12, VC3, VC4Subnetwork protection SNCP

Plug-in SFP transceiversSTM-4: ITU-T G.957

OI.S4A LC/FPLD 1310 nm/15 kmOI.L4A LC/DFBLD 1310 nm/48 kmOI.L4B LC/DFBLD 1550 nm/80 kmOI.L4B1 LC/DFBLD 1550 nm/120 km

STM-1: ITU-T G.957 OI.S1A1 LC/FPLD 1310 nm/15 kmOI.S1A LC/FPLD 1310 nm/40 kmOI.S1B LC/DFBLD 1550 nm/93 kmOI.S1 electrical CMI/12.7 dB at 78 MHz

FE: IEEE 802.3 OI.S1A1 LC/FPLD 1310 nm/15 kmOI.S1A LC/FPLD 1310 nm/40 kmOI.S1B LC/DFBLD 1550 nm/93 km

GbE: IEEE 802.3 OI.GbE-AS LC/MQW FPLD 1310 nm/10 kmOI.GbE-A LC/DFBLD 1310 nm/30 kmOI.GbE-ZX LC/DFBLD 1550 nm/60 kmEI.GbE-RJ45 RJ45/CAT5/CATe/CAT6/100 m

OTS

622

SD

H/S

ON

ET M

ultis

ervi

ce O

ptic

al T

rans

port

Sys

tem

s

Page 20: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Passive optical modules for increasing the capacity of a single optical fiber using wavelength-division multiplexing

Passive WDM multiplexers for increasing the capacity of a single optical fiber, for up to 2 wavelengths 1310/1550 nm

Passive CWDM Mux/Demux for increasing the capacity of a single optical fiber, for up to 4 or 8 wavelengths 1471/1491/1511/1531/1551/1571/1591/1611 nm

Passive optical add/drop multiplexer for one or two wavelengths

CWDM

λ11511λ21531λ31551λ41571

λ1

λ2

λ3

λ4

λ2λ1

λ3

λ4

CWDM4

OADM-1

OADM-1

OADM-2

λ1λ2λ3λ4λ2λ3λ4

λ1

20

WDM/CWDM/OADM Passive Optical Mux/Demux & Optical Add/Drop Multiplexers

WD

M/C

WD

M/O

AD

M P

assi

ve O

ptic

al M

ux/D

emux

& O

ptic

al

Add

/Dro

p M

ultip

lexe

rs

Page 21: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

21

WD

M/C

WD

M/O

AD

M P

assi

ve O

ptic

al M

ux/D

emux

& O

ptic

al

Add

/Dro

p M

ultip

lexe

rs

T E C H N I C A L D A T A

WDM2 wavelengths per one fiber [nm] 1310, 1550Isolation 25 dB/45* dB (*high isolation option)Maximum insertion loss 0.4 dB Optical connector LC or FC/PC

CWDM4 MUX/DEMUX modules4 wavelengths [nm] 1511, 1531 1551, 1571 optionally any combination from CWDM8Maximum insertion loss 1.2* dB/1.8 dB (*ultra low insertion loss option)Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

CWDM4e MUX/DEMUX modules4+1 wavelengths [nm] 1511, 1531 1551, 1571 +1310 optionally any combination from CWDM8Maximum insertion loss 1.8 dB, (0.8 dB for 1310) Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

CWDM8 MUX/DEMUX modules8 wavelengths [nm] 1471, 1491, 1511, 1531, 1551, 1571 1591, 1611 Maximum insertion loss 1.8* dB/2.8 dB (*ultra low insertion loss option)Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

CWDM8e MUX/DEMUX modules8+1 wavelengths [nm] 1471, 1491, 1511, 1531, 1551, 1571, 1591,1611 +1310 Maximum insertion loss 2.8 dB, (0.8 dB for 1310) Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

OADM-1 ADD/DROP module add and drop 1 selected wavelength from CWDM range 1417-1611 nm (*option add/drop 1310 channel - module OADM-1e)Maximum insertion loss 1 dB for add/drop channel 1.2 dB for pass through channel Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

OADM-2 ADD/DROP module add and drop 2 selected wavelengths from CWDM range 1417-1611 nm (*option add/drop 1310 channel - module OADM-2e)Maximum insertion loss 1.2 dB for add/drop channel 1.6 dB for pass through channel Isolation 30 dB adjacent, 50 dB non-adjacent channelsOptical connector LC

WDM-8 Rack mechanical construction for up to eight WDM/CWDM/OADM modules 19”/ETSI/1U height

Power supply NO (passive modules)

Mechanical dimensionsWDM-8 44.5 x 436.6 x 200 mm WDM/CWDM/OADM modules 17,3 x 90 x 140 mm

Page 22: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

22

Multiservice Access Node (MSAN)

Universal access PSTN

8 to 72 external and 16 to 80 internal links 2 Mbit/s

Digital channel cross-connect between all 88 links (non blocking)

Concentrator according to V5 .2 up to 2400 subscribers, for remote multiplexers and/or V5 .2 access nodes

Protocol conversion V5 .2-CAS

Built in optical transmission, TDMoIP access, multiple conference and service channels avaible

FM-MSAN (FM8x2) MULTISERVICE ACCESS MULTIPLEXER

Ac

ce

ss

Sy

ste

ms

Page 23: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

ATC E/M

ATAATC

64 kb/s G.703

n x 64 kb/s V.11/X.21

V.24/V.28

U ISDN, 2B+D

PAT PAC

PCO

PN64

8 x E1G.703, 2 Mb/s, V5.2

LB

PIU-LT

64/128 kb/s, X.21 NTX

ATC U ISDN, 2B+D

PIU

-NT

PSH SHDSL

n x 64 kb/s

n x 64 kb/s Ethernet 10/100 BaseTx

PET

64 kb/s, G.703

64/128, 144 kb/sEthernet 10/100 BaseTx

NTI-CO

NTI-ET

NTI-R

n x 64 kb/sX.21

n x 64 kb/s E1 G.703

n x 64 kb/sEthernet 10/100 BaseTx

LTS-E1

LTS-ET

LTS-X

PLBPEM

NT

FM-MSAN

ISDN

PN64A≤115,6 kb/s V.24/V.28

8 x E1 G.703, 2 Mb/s

PE-1

POT

PTP

TDMoIPOpticalFibre

NTI-X

23

Applications

FM-MSAN access multiplexer is designed to allow transmission of voice and data in access telecom-munication networks. It can be configured as access multiplexer, drop/insert, cross-connect and fractional multiplexer and concentrator according to V5.2.

Features

Supports over 15 different transmission and subscriber, analog and digital interfaces

Redudant central unit Cross-connect non-blocking switching fabric for

up to 88 E1 links, CAS signalling includid Up to 21 universal unit slots per subracks Up to 20 channels per unit Advanced traffic protection mechanism for E1

links Line test access Concentrator according V5.1/V5.2 protocol for

POTS and ISDN-BRI/PRI Intergarted Optical Transmission Unit Intergrated TDM over IP Line Card NMS based on client server application with data

base replication SNMP based agent

Configurations

FMV– multiplex, cross-connect, control and power supplay unit with V5.2 interface

Various types of channel units with up to 20 user interfaces

PE1 – 8xE1 interfaces unit, up to 8 units per FM-MSAN

Rack configuration – 1 to 4 subracks, 21 (19, 12) universal unit slots, 2 special slots for central unit

User interfaces

2w/4w analog voice interface with E/M signaling 2w analog voice interface ATA – for direct

connection to a phone 2w analog voice interface ATC – for direct

connection to a exchange 2w analog voice interface LB – for direct

connection to a phone with local battery supply

64 kbit/s digital interface, codirectional G.703 n x 64 kbit/s digital interface with X.21 interfece Asynhronous/synhronous digital interface V.24,

up to 38.4 kbit/s ISDN basic rate access U interface SHDSL, n×64 kbit/s interface Ethernet 10/100 BaseT and 100 BaseFX interface Conference connection

FM

-MSA

N (F

M8x

2)

MU

LTIS

ERVI

CE A

CCES

S M

ULT

IPLE

XER

Page 24: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

24

FM

-MSA

N (F

M8x

2)

MU

LTIS

ERVI

CE A

CCES

S M

ULT

IPLE

XER

Channel units

PEM10 – 10 channels 2w/4w with E/M signaling

PAT10 – 10 channels, ATA interface

PAT20 – 20 channels, ATA interface

PAC10 – 10 channels, ATC interface

PLB10 – 10 channels, LB interface

PCO – 10 channels, 64 kbit/s digital interface, codirectional G.703

PN64 – 4 channels, n×64 kbit/s, V.11/X.21 inter-face

PN64A – 8/4 channels, asynchronous/synchronous transmission from 2.4 up to 115.6 kbit/s, V24/V.28

PIU-LT – 4 channels, ISDN U interface, 2B1Q for direct connection to a ISDN phone

PIU-NT – 4 channels, ISDN U interface, 2B1Q for direct connection to a ISDN exchange

PSH – 4 channels, SHDSL n×64 kbit/s interface or 2 Mbit/s or Ethernet over SHDSL

PET – 3 channels, n×64 kbit/s Ethernet bridge with 10/100 BaseT or/and 100 Base FX interface

PIO - 8 x digital I/O

PCF – up to 5 conferences with up to 60 users

POT - Integrated Optical Transmission unit with 1+1 APS and additional 2xE1

PTP - TDM over IP Transmission Unit with additional 2xE1

Control and monitoring

Integrated network management system SUNCE-M provides continuous management of FM-MSAN and all other IRITEL’s SDH and PDH equipment (ODS155, OTS622 ...)

For NMS system integration we support standard interface based on SNMP protocol

Synhronization

From internal built-in oscillator (± 25 ppm)

From external 2 048 kHz clock

From received clock on any external link

From received clock on a chosen digital channel interface

Mechanical design

Unit (233×160×20 mm) and (233×175×20mm)

19”/ETSI cabinet’s rack (300×483/533×230 mm)

19”/ETSI cabinet for 4 subracks (2200×600×300 mm)

ETSI cabinet for 3 subracks (1200×600×400 mm)

Wall mount cabinet for 17 or 14 units and uninteruptable power supply (650×600×300 mm)

Page 25: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

25

FM

-MSA

N (F

M8x

2)

MU

LTIS

ERVI

CE A

CCES

S M

ULT

IPLE

XER

T E C H N I C A L D A T A

E1 Tributaries2048 kbit/s according to ITU-T G.703, G.704 and G.706

2w/4w analog voice interface with E/M signalingImpedance 600 ΩRelative levels 2w/4w input and output levels –16 up to +4 dBr in steps 0.1 dBE/M signaling output (E) ≤ 50 mA/150 V input (M) ≤ 500 Ω (2 mA)

2 wire analog voice interface ATCImpedance 600 ΩRelative levels output –4 dBr±3 dB (in 0.1 dB steps) input –3 dBr±3 dB (in 0.1 dB steps)Loop current ≤ 60 mALoop resistance ≤ 350 ΩRinging load impedance > 1 kΩ + 0.47µFRinging detection level 15 up to 35 Veff /25 HzMaximum ringing voltage 90 Veff

Ringing frequency 16 up to 50 HzMetering frequency(standard/option) 16/12 kHz ± 1% sensitivity level 85 mV

2 wire analog voice interface ATAImpedance ETSI/600 ΩRelative levels output –7 dBr±3 dB (in 0.1 dB steps) input 0 dBr±3 dBr (in 0.1 dB steps)Loop feeding 48 V/2x400 Ω, loop resistance up to 1200 Ω,Ringing signal from ring generator (GZV15) 50 do 75 Veff/25 HzMetering frequency (standard/option) 16/12 kHz ± 1%

2 wire analog voice interface LBImpedance 600 ΩRelative levels output –4 dBr±3 dB (in 0.1 dB steps) input –3 dBr±3 dB (in 0.1 dB steps)Ringing load impedance > 1 kΩ + 0.47µFRinging detection level 15 up to 35 Veff /25 HzMaximum ringing voltage 90 Veff

Ringing frequency 16 do 50 HzRinging signal from ring generator (GZV15) 50 do 75 Veff/25 Hz

64 kbit/s digital interface according to ITU-T G.703, codirectional

n x 64 kbit/s digital interface according to ITU-T V.11/X.21 or V.35

Asynchronous/synchronous digital interface V .24/V .28 transparent transmission up to 115.6 kbit/s

ISDN interfaceU interface channel structure: 2B+D line code: 2B1Q according to ETSI ETR 080

SHDSL interface according to ETSI TS 101 524 and ITU-T G.991.2

Ethernet bridge interface10/100 BaseT and 100 BaseFX according to IEEE 802.3

External clock reference 2048 kHz according to ITU-T G.703/10

TMN interfaceSUNCE-M (proprietary) F (RS232/V.24 or 10/100 BaseTX Ethernet), Q2 (RS485), Q2Et (10/100 bT)SNMP/V1/V2/V3 RFC 3895 (DS1/E1), RFC 2494 (DS0), RFC 4316 (SHDSL) Proprietary MIB extension for DS0

Operating temperature range -50 C up to +450 C (class 3.2)

Page 26: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

4 x ISDN U

Main Alarms

Alarms

26

Provides connection to ISDN exchange for 4 remote subscribers, via multiplexers FM2x2, FM-MSAN

Single pair subscriber loop with 2B1Q line code

PIU-LT (Line Termination) and PIU-NT (Network Termination) options

PIU 4 ISDN tributaries with U interface

Ac

ce

ss

Sy

ste

ms

Page 27: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

U ISDNExchange

(LT)

EOC

= 0

NT1PIU (NT)

FM2x2

ISDN U

G.703

2 Mbit/s

PIU (LT)

FM2x2

PIU (NT)

FM2x2

ISDN U PIU (LT)

FM2x2G.703

2 Mbit/s

ISDN U

Embeded Operations Channel (EOC)

EOC

= 6

EOC

= 5

EOC

= 4

EOC

= 1

2B+D Transparency

PIU (LT)

FM2x2

PIU (NT)

FM2x2

ISDN U

EOC

= 3

EOC

= 2

G.703

2 Mbit/s

PIU/FM2x2 regenerator chain between remote subscriber and ISDN exchange

27

PIU

IS

DN

sub

scri

ber u

nit w

ith U

inte

rfac

e

Applications

PIU unit, as tributary unit within multiplexers FM2x2 and FM-MSAN provides connection of remote cus-tomer to ISDN exchange. User NT1 equipment is NT (network termination), whereas U-interface at ex-change side is LT. Therefore, PIU unit at customer side must be PIU-LT, and PIU unit at exchange side PIU-NT.

Remote subscriber can be connected with ISDN exchange via more than one PIU-LT/PIU-NT pair, but maximum number of regenerators is six (i.e. three LT/NT pairs). For test purposes ISDN exchange can send diagnostic commands through EOC channel to each PIU unit in chain. 3 bits are reserved for address. “0” is address of NT1 equipment, “1” to “6” are for PIU units in chain, and “7” is for all stations in chain (broadcast).

Basic functions

4 ISDN U interfaces on PIU unit

One U-ISDN occupies 2.5 64kbit/s channels in FM2x2 and FM-MSAN multiplex

Position of U-ISDN in multiplex is configurable by management software

Transport via single pair is accomplished by use of 2B1Q line code with near-end echo cancellation

PIU-LT is equipped with remote power feed source, which can provide power feeding of NT1 without local power supply

Copper-pair interruption detection

Short-circuited copper-pair detection

Remote loopback control from ISDN exchange through EOC

Performance monitoring

Control and monitoring

PIU unit within multiplexers FM2x2 and FM-MSAN can be controlled by PC software SUNCE-M (Network Manager):

PIU unit configuration

time slot assigning

remote power feed control

performance monitoring control

alarm monitoring control

Alarm monitoring

ISDN exchange has loopback control over PIU unit by means of EOC.

Activation and deactivation of U-interfaces is initiated from NT1 or exchange.

T E C H N I C A L D A T A

ISDN U interface ITU-T G.960, G.961 compliant

Transport type duplex

Transport medium one twisted-pair

Line code 2B1Q

Line speed 80 kboud ± 100 ppm

64kbit/s channels per interface 2.5

Maximum line attenuation at 40 kHz 36 dBm at 80 kHz 45 dBm

Maximum line resistance without repeaters 1048 Ω with repeaters 1300 + 700 Ω

Synchronization frame 1.5 ms multiframe 12 ms

Scrambling 1 + X-18 + X-23

CRC12 X12 + X11 + X3 + X + 1

Remote power 105 V

Page 28: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Ethernet Bridge #1

100 b

FX

10/

100 b

T

100

bFX10

/100

bT

Ethernet Bridge #2

Ethernet Bridge #3

10/1

00 b

T

100

bFX

Main alarms

Controlsignals

28

Provides connection of remote LAN network with Ethernet 10/100Base-TX or 100Base-FX interface via telecommunication network with n x 64 kbit/s data rate .

Programming the number (1 do 31) of 64 kbit/s channels for any of 3 digital subscribers .

PET 3 digital nx64 kbit/s Ethernet Bridge subscribers with 10/100BaseT or 100BaseFX interface

Ac

ce

ss

Sy

ste

ms

Page 29: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

E1, E3STM1/4

SDH/PDHnetwork

FMP

PET

FMP

PETFM

P

PET

ISPInternet

Switch

LAN

Eth

LANEth

Switch

LAN

Eth

Switch

Internet

Corporate

E1

FMP

PET

E1

E1

E1

Remotestations

Eth

Eth

Eth

E1, E3STM1/4

Multiplexer

29

PET

n

x 64

kbi

t/s

Ethe

rnet

Bri

dge

subs

crib

er u

nit

Applications

PET unit, as tributary unit within multiplexers, is used when subscriber want to connect devices with Etherent 10/100 Base-T or 10/100 Base FX interfaces through the transport telecommunication network. Any of 3 ports realize the Switch function on level 2 (MAC level). PET unit can be programmed at nx64 kbit/s rate on Ethernet Bridge interface to the trans-port network.

Basic functions

3 independent Ethernet Switches on one unit, 10/100 Base T/100 Base FX interface and one internal WAN interface for nx64 kbit/s Ethernet Brigde function

Electrical Ethernet interfaces (10/100 BaseT) sup-port auto negotiation procedure which determine the type of interface (10 or 100 Mbit/s, full or half duplex)

All three Ethernet Switches can be configurated for VLAN

Support for QoS priority choice according to the port or IEE802.1p

LED diodes for links activity, full/half duplex trans-mission and data rate

Integrated control and monitoring

When autonegotation is switched off it is pos-sible to programme all three 10/100 BaseT ports independently

Flow control for full duplex transmission according to IEE802.3x or back pressure flow control for half duplex transmission

Automatic address learning for MAC frame switch-ing

T E C H N I C A L D A T AEthernet 10/100 BaseT

Transport type duplexElectrical characteristics IEEE 802.3 Transmission symmetrical Section length (UTP cable class 5) 135 m Connector RJ45

Ethernet 100 BaseFX SFP plug-in module

Transport type duplexOptical characteristics IEEE 802.3 Transmission singlemode optical fiber Section length 2000 m Connector SC

Page 30: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

n x 64X.21

n x 64X.21

n x 64X.21 n x 64

X.21

Main Alarms

Control Signals

Control Signals

30

Provides connection of terminal equipment (DTE) with n x 64kbit/s X.21/V.11 interface to telecommunication network via multiplexers FM2x2 and FM-MSAN (DCE)

Independent selection of number (1 to 31) of 64 kbit/s channels for each interface

PN64 4 digital interfaces of X.21/V.11 type, n x 64 kbit/s

Ac

ce

ss

Sy

ste

ms

Page 31: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FMP

PN64

FMP

PN64

FMP

PN64

FMP

PN64

SDH/PDHNetwork

X.25Frame Relay

(DTE)

TCP/IPRouter(DTE)

n x 64 kbit/sX.21

X.21n x 64 kbit/s

E1

PDHSDH

PDHSDH

E1

E1

n x 64 kbit/sX.21

X.21n x 64 kbit/s

E1

Multiplexer

X.21Audiovideo

service(DTE)

Subscriber(DTE)

31

PN

64

subs

crib

er u

nit,

n x

64 k

bit/

s, X

.21/

V .11

Applications

PN64 unit, as tributary unit within multiplexers FM2x2, and FM-MSAN, provides network access to customer equipment based on X.21 interface. Bit rate n x 64 kbit/s on X.21 interface is programmable and not de-pendant on protocol type used for providing service to customer.

Basic functions

4 n x 64kbit/s X.21 interfaces on one board

Programmable position in multiplex for each n x 64 kbit/s channel, independent

Number of 64 kbit/s channels, n per interface can be 1, 2,..., 31

Independent selection of X.21 interface type: codirectional or contradirectional

Byte Timing signal (B) is available for contradirec-tional interface type

Selectable Byte Timing signal type: time slot (byte) or PCM frame of FM2x2 and FM-MSAN

Codirectional interface type can be referent clock source for multiplexers FM2x2 and FM-MSAN

Asymmetric capacity is possible for codirectional interface type

Unused interfaces can be switched off for power saving

States of near (DCE) and far (DTE) end are displayed by front LEDs

Control and monitoring

PN64 unit within multiplexers FM2x2 and FM-MSAN is controlled by PC software SUNCE-M (Network Manager):

PN64 unit configuration:

activation/deactivation of interfaces

time slot assigning

contradirectional/codirectional selection

referent clock selection

Alarm monitoring

T E C H N I C A L D A T A

X.21 interface ITU-T X.27, V.11 compliant

Transport duplex

Transport medium 6 twisted-pairs

Connector 15-pin SUBD, female

No. of 64kbit/s intervals per interface 1 to 31

Line rate n x 64 kbit/s

Maximum line length

up to128 kbit/s 1300 m

up to 2048 kbit/s 60 m

Copper-pair termination

Transmit (R, S, B and I signals) 120 Ω

Receive (T, X, C signals) 120 Ω

Page 32: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

5x64 kbit/sG.703

5x64 kbit/sG.703

MainAlarms

TributariesAlarms

TributariesAlarms

32

Provides connection for 10 independent subscribers with G .703 64 kbit/s codirectional interfaces via multiplexers FM2x2 and FM-MSAN

PCO 10 digital G.703 64 kbit/s codirectional interfaces

Ac

ce

ss

Sy

ste

ms

Page 33: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FMP

PCO

FMP

PCO

FMP

PCO

FMP

PCO

SDH/PDHNetwork

64 kbit/sG.703

G.70364 kbit/s

E1

E1

E1

64 kbit/sG.703

G.70364 kbit/s

E1

Multiplexer

Mainframe

Audiovideo

service(DTE)

Subscriber(DTE)

33

PCO

su

bscr

iber

uni

t with

G .7

03 6

4 kb

it/s

codi

rect

ion

inte

rfac

e

Applications

PCO unit, as a tributary unit within multiplexers FM2x2 and FM-MSAN provides connection between remote customers having equipment based on ITU-T G.703 64 kbit/s codirectional interface though TDM based telecommunication network. Each interface is abso-lutely transparent regarding the protocol that gives particular service to the customer.

Basic characteristics

10 independent 64 kbit/s G.703 codirectional interfaces accessible from rear side

Each channel could be programmed to occupy any time slot into any external E1 link

Octet framing programming capability for each channel

Power saving mode for the unused interfaces

Each channel can be programmed to be synchronization source for multiplexers FM2x2 and FM-MSAN

Control and monitoring

PCO unit within multiplexers FM2x2 and FM-MSAN is controlled by PC software SUNCE-M (Network Manager):

PCO unit configuration:

Interface activation and deactivation

Time slot allocation

Framing type definition

Alarm monitoring

Synchronization

Centralized alarm monitoring and acquisition functions

T E C H N I C A L D A T A

G.703 64kbit/s codirectional

Transmission full duplex Transmission medium 2 pairs Line speed 256 kbit/s±100 pmm Framing unframed octet framing Input Impedance 120 Ω

Loss at 128 kHz 0 do 3 dB

Return loss:

4 to 13 kHz ≥12 dB 13 to 256 kHz ≥18 dB 256 to 384 kHz ≥14 dB

Output

Impedance 120 Ω

Impulse level 1 V ±0,1 V

Impulse width single 3900 ns double 7800 ns Impulse shape according to ITU-T G.703 single 5a/G.703 double 5b/G.703 Section length 800m or better With 24AWG twisted pairs

Connector 25-pin, D-type, female jointly for 5 interfaces

Page 34: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

V.24#1

V.24#2

V.24#3

V.24#4

V.24#5

V.24#6

V.24#7

V.24#8

Control Signals

34

Asynchronous transmission independent from code and data rate

Data rate in multiplex 64 kbit/s to 384 kbit/s

Submultiplexing up to 8 channels in 64 kbit/s

Interface data rate: 2400 bit/s up to 115 .6 kbit/s

PN64A 8 digital interfaces of V.24/V.28 type

Ac

ce

ss

Sy

ste

ms

Page 35: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FMP

PN64

FMP

PN64A

FMP

PN64

FMP

PN64A

SDH/PDHNetwork

X.25Frame Relay

(DTE)

TCP/IPRouter(DTE)

n x 64 kbit/sX.21

V.24/V.28

2.4 to 115.6 kbit/s

E1

PDHSDH

PDHSDH

E1

E1

n x 64 kbit/sX.21

V.24/V.28

2.4 to 115.6 kbit/s

E1

Multiplexer

35

PN

64

subs

crib

er u

nit,

V .24

/V .2

8

Applications

PN64A unit, as tributary unit within multiplexers FM2x2 and FM-MSAN, provides network access to customer equipment based on V.24/V.28 interface for transparent asynchronous data transmission. Used multiplex data rate for transmission is software pro-grammed and can be 64 kbit/s up to 384 kbit/s and submultiplexing up to 8 channels in 64 kbit/s.

Basic functions

8 interfaces V.24/V.28 on one unit

Programmable position of used channels in multiplex

Selection of data rate in multiplex for transmission: 64 to 384 kbit/s

Submultiplexing up to 8 channels in 64 kbit/s

Asynchronous transmission independent from code and data rate

Control and monitoring

PN64A unit within multiplexers FM2x2 and FM-MSAN is controlled by PC software SUNCE-M (Network Manager):

PN64A unit configuration:

activation/deactivation of interfaces

time slots assigning

submultiplex assigning

Alarm monitoring

T E C H N I C A L D A T ANumber of interfaces 8

Digital interface (TD, RD, RTS, DCD) ITU-T V.24/V.28

Transmission method asynchrounos transparent (ITU-T R.111)

Connector (EIA-561) RJ-45

No. of 64kbit/s time slots 1 to 6

Interface data rate 2400 bit/s up to 115.6 kbit/s

Asynchronous distortion <8%

Page 36: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

36

Universal TDM narrowband and packet broadband optical transmission platform

Up to 400 equivalent 64 kbit/s subscribers

Wire speed broadband Ethernet Services

Point to point leased line or switched TDM services over optical transmission medium

1+1 optical Automatic Protection Switch (APS)

FMOP FLEXIBLE MULTIPLEXER OPTICAL PLATFORM

Ac

ce

ss

Sy

ste

ms

Page 37: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

CENTRAL OFFICE

FMOP

Modem

Router

POTSPOTS

E 1

Ethernet

FMOP

ISP

CORPORATE HEADQUARTERS

ISDN BRI

IP DSLAM

Ethernet

IP SWITCHClass 4/5

E 1

BRANCH OFFICE

WDM/DWDMDark Fiber

Leased LineE1 Services

Leased Line E1 Services

Switched TDM

Services

Leased Line Digital Services

Leased Line Analog and

Digital Services

Subscriber units for

analog and digital

narrowband switched and

leased line services

37

Applications

FMOP is flexible multiplexer specially designed to allow transmission of TDM narrowband voice and data signals and broadband Ethernet packet data in point to point configurations over optical transmis-sion medium.

Device enables reliable and high quality TDM voice and data services with low latency and guar-anteed throughput. FMOP helps user to protect their existing investments in legacy TDM based CO and CPE equipment and at the same time enable smooth transition to a new broadband services. For the users who requires guaranteed quality of services FMOP represents unparallel solution compared to a VoIP technology.

Typically FMOP find application for:

Connecting remote analog subscribers, FXS, FXO Connecting remote ISDN BRA subscribers Leased line access to Internet Service Providers

(ISP) Leased line services over E1 for corporate PABX

connections IP DSLAM connections to remote IP SWITCH

FMOP multiplexer is suitable to be used by:

Public telecommunication networks operators Public utility companies Large and medium sized companies Government offices and agencies

Features

Supports over 15 different transmission and subscriber, analog and digital interfaces. Shares the same channel units with other multiplexers from IRITEL.

4 E1 PDH tributary interfaces for 2 Mbit/s Full non-blocking cross-connect Up to 21 universal unit slots per subracks Up to 20 channels per unit Various synchronization sources are available,

received clock from line, from a subchannel, from internal oscillator or from external reference

Line test access Integrated network management system, SNMP

and SUNCE support Supports fiber rings and complex network struc-

ture

Plug-in SFP optical transceivers, provides different fiber type and section lengths

Wire speed Ethernet bridge functionality Optical Line protection, 1+1 Advanced fault diagnosis (integrated BER tester)

User interfaces

Analog: 2w/4w with E/M signaling, 2w FXS, 2w FXO, Magnetic

Digital 64 and nx64 kbit/s: X.21, asynhronous/synhronous V.24, ISDN U, SHDSL, Ethernet

FM

OP

FLE

XIBL

E M

ULT

IPLE

XER

OPT

ICA

L PL

ATFO

RM

Page 38: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

38

FOP4/8/16 4/8/16xE1 + 2xFE over Fiber Multiplexer

Ac

ce

ss

Sy

ste

ms

Simultaneously multiplexes 16 E1 and one 10/100 Mbit/s Ethernet tributaries

Plug in optical transceivers supporting short, medium, long, dual or single fiber options

Up to 120 km section length

1+1 optical Automatic Protection Switch (APS) option

Ring topology support

Control and monitoring over Embedded Web server and SNMP (MIB: RFC-2495, RFC 2233, RFC 2493) support for NMS

Local displaying of remote device alarms

Compact 1U, stand alone or 19”/ETSI mount options

External office/environmental dry contact alarm inputs and orderwire option

220V AC and/or -48V DC options (dual power protection)

Embedded BER Built In Self Test (BIST) on all E1 tributaries and Optical line

8 x E1 E1 LED IP reset 2 x SFP

2 x 10/100 Eth MNG Eth

Page 39: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

39

FO

P4/8

/16

4/8

/16x

E1 +

2xF

E ov

er F

iber

Mul

tiple

xer

Description

FOP16 is optical transmission equipment that com-bines up to 16 TDM E1 signals and one packet oriented 100 Mbit/s Ethernet signal through the fiber link. Besides, optical multiplexer FOP16 provides many value-added functions and interfaces in order to meet different customers needs. It is a very flexible and ef-ficient way to use the FOP16 in optical transmission network for voice, data, and wireless applications.

FOP16 provides network management system for local/remote maintenance purpose by a well known and friendly GUI based Web Server and standard SNMP. FOP16 also provide switch and LED indications for field application.

On optical transmission line, the FOP16 provide two fiber links for 1+1 protection or ring configuration.

Application

Point-to-point fiber optic links

Linear fiber optic networks, providing add-and drop capability

Supports fiber rings and complex network struc-ture

Local cross-connect at E1 (2 Mbit/s) levels

Main features

Plug-in SFP optical transceivers, provides different fiber type and section lengths

16 E1 PDH tributary interfaces for 2 Mbit/s

Full non blocking cross-connect matrix at E1 level

Wire speed Ethernet bridge functionality

Optical Line protection, 1+1

Advanced fault diagnosis (integrated BER tester)

Integrated network management system

SNMP northbound and southbound interfaces SNMP MIB

Control and monitoring using standard SNMP viewer

T E C H N I C A L D A T AOptical interface 155520 kbit/s

Number of interfaces up to 2xSFPFrame proprietaryMultiplexing method ITU-TG.472 likeOptical characteristics depends on plug in module characteristics option -S1A optical connector LC light source FPLD, 1310 nm output power –5 dBm typical section length 49 km option -S1B optical connector LC light source DFBLD, 1550 nm output power –5 dBm typical section length 100 km sensitivity for 10-10 BER –34 dBm maximum input level –10 dBm

Interface G.703 2 Mbit/s

Type of signal 2048 kbit/s ±50 ppm HDB3Nominal impedance 75 Ω asymmetric 120 Ω symmetricInput Max. cable attenuation 0 - 6 dB at 1024 kHz Input jitter tolerance ITU-T G.823 Input return loss 12 dB in range 50 kHz to 100 kHz 18 dB in range 100 kHz to 2 MHz 14 dB above 2 MhzOutput Nominal impulse amplitude 2.37 V ± 0.237 V, 75 . Impulse shape according to ITU-T 15/G.703 Output jitter up to 100 kHz 0.25 UI p-p in range 18 kHz to 100 kHz 0.05 UI p-p

Ethernet interface 2 x10/100 BaseTx (IEEE 802.3)

Power supply

DC input voltage –36 to –72 VPower consumption <4 W

Environmental conditions

Climatic conditions class 3.1 ETSITemperature -5ºC to +45ºC

Physical dimensions (H x W x D)

Unit 440 x 257 x 43.2 mmWeight 3.15 kg rack-mountable hardware included

Page 40: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

40

Universal TDM narrowband and packet broadband TDM over IP transmission platform

Up to 400 equivalent 64 kbit/s subscribers

High speed broadband Ethernet Services

Point to point or point to multipoint leased line or switched TDM services over Ethernet packet based transmission network

Various protection mechanisms

SUNCE and SNMP based TMN support

FMTP FLEXIBLE MULTIPLEXER TDMoIP PLATFORM

Ac

ce

ss

Sy

ste

ms

Page 41: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

41

Applications

FMTP is flexible multiplexer specially designed to allow transmission of narrowband voice and data signals in point to point or point to multipoint con-figurations Ethernet packet core network.

Device enables reliable and high quality TDM voice and data services with low latency and guaranteed throughput. FMTP helps user to protect their existing investments in legacy TDM based CO and CPE equip-ment and to avoid costly E1 leased lines necessary for existing equipment operation. For the users who re-quires guaranteed quality of services FMTP represents unparallel solution compared to a VoIP technology. Typically FMTP find application for:

Connecting remote analog subscribers, FXS, FXO Connecting remote ISDN BRA subscribers Leased line services over E1 for corporate PABX

connections Wireless base station backhauling

FMTP multiplexer is suitable to be used by:

Public telecommunication networks operators Public utility companies Large and medium sized companies Government offices and agencies

Features

Supports over 15 different transmission and subscriber, analog and digital interfaces. Shares the same channel units with other multiplexers from IRITEL.

2 E1 PDH tributary interfaces for 2 Mbit/s Full non-blocking cross-connect Up to 21 universal unit slots per subracks Up to 20 channels per unit

Various synchronization sources are available, received clock from line, from a subchannel, from internal oscillator or from external reference

Line test access Integrated network management system, SNMP

and SUNCE support Plug-in SFP optical transceivers, provides different

fiber type and section lengths Wire speed Ethernet bridge functionality Various protection mechanisms Advanced fault diagnosis (integrated BER tester)

User interfaces

Analog: 2w/4w with E/M signalling, 2w FXS, 2w FXO, Magnetic

Digital 64 and nx64 kbit/s: X.21, asynchronous/synchronous V.24, ISDN U, SHDSL, Ethernet

FM

TP F

LEXI

BLE

MU

LTIP

LEXE

R TD

MoI

P PL

ATFO

RM

CENTRAL OFFICE

FMTP

Modem

Branch Oce Router

POTS

POTS

E 1

Ethernet

FMTP

BSC

CORPORATE HEADQUARTERS

ISDN BRI

E 1

BRANCH OFFICE

Leased Line

E1 Services

Leased Line E1

Services PABX

Switched TDM

Services

Leased LineE1 Services

Leased Line Analog and

Digital Services

Subscriber units for

analog and digital

narrowband switched and

leased line services

E 1

EthernetIP

Core network

100 BTX100 BFX

100 BTX100 BFX

BTS

IP DSLAM

100 BTX

100 BFX

E1

ISP

100 BTX100 BFX

Ethernet

Page 42: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

42

Simultaneously performs TDM circuit emulation over enterprise or carrier packet-switched Ethernet L2/L3 networks for 4, 8 or 16 E1

At the Ethernet line side supports both electrical Fast and optical 100 FX Ethernet interface

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet .

Compliant with IETF, ITU-T, MFA Forum and Metro Ethernet Forum Technical Specifications

Recovered clock jitter and wander compliant to ITU-T G .823, G .824 . Supports adaptive clock recovery, differential clock (common clock) (using RTP), external clock

Lost/misordered packet compensation

FTP4/816 provide traditional leased-line and TDM switched services transparently over IP with higher voice quality with much lower latency than VoIP and can support all applications that run over E1 circuits, not just voice

FTP4/8/16 4/8/16xE1 TDM over IP Multiplexer

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 43: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

43

FTP

4/8/

16 4

/8/1

6xE1

TD

M o

ver I

P M

ultip

lexe

r

Description

FTP4/8/16 is TDM circuit emulation over Ethernet packet switched network transmission unit. It com-bines 4, 8 or 16 TDM E1 signals over IP based network. FTP4/8/16 enables transparent services for E1 signals from central unit transmission over enterprise or car-rier Ethernet network.

Besides TDM traffic transmission over IP based networks FTP4/8/16 provides many value-added functions in order to meet different customers needs including different network management capabilities, traffic protection, synchronization etc.

Applications

In carrier network FTP4/8/16 typically fins applica-tions for:

TDM services over Ethernet MAN, broadband wireless, CATV

2G / 2.5G cellular backhaul over IP/MPLS

HDLC-based traffic (ex. Frame Relay) trunking over IP/MPLS

PSTN-IP network bridging

SS7 transport over IP

In enterprise applications FPT4/8/16 is suitable to be used for:

Private line/toll bypass via Ethernet MAN

TDM PBX migration to Ethernet MAN

In access networks FTP4/816 typically fins application as Multi Tenant Multi Dwelling Unit MTU/MDU

Basic features

4, 8 or16 E1, framed or unframed, PDH tributary interfaces

One 10/100 electrical and one 100 optical Ethernet interface

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet

Recovered clock jitter and wander compliant to ITU-T G.823, G.824 synchronization interface

Lost/misordered packet compensation

Compliant with:

IETF PWE3 Internet drafts for SAToP, TDMoIP, CESoPSN, HDLC

ITU-T Recommendations Y.1413 and Y.1414 (clause 10)Y.1453, Y.1452.

MFA Forum Implementation Agreements 4.1, 5.1 and 8.0.0

Metro Ethernet Forum Technical Specification MEF8

Supports adaptive clock recovery, differential clock (common clock) (using RTP), external clock and loopback timing modes

Integrated network management system, SNMP and SUNCE support

T E C H N I C A L D A T AEthernet interfaces

Standards IEEE 802.3, IEEE 802.3u IEEE 802.1p, IEEE 802.1Q

Maximum Frame size 1536 bytes

10/100 BaseTx

Number of interfaces 1

Data rate 10 or 100 Mbits Full/Half duplex

Connector RJ45

100 BaseFx

Number of interfaces 1

Data rate 100 Mbits Full duplex

Connector SFP plug in module

option -S1A optical connector LC light source FPLD, 1310 nm output power –5 dBm typical section length 49 km option -S1B optical connector LC light source DFBLD, 1550 nm output power –5 dBm typical section length 100 km sensitivity for 10-10 BER –34 dBm

maximum input level –10 dBm

Interface G.703 2 Mbit/s

Number of interfaces 4, 8, 16Type of signal 2048 kbit/s ±50 ppm HDB3Nominal impedance 75 Ω asymmetric 120 Ω symmetricInput Max. cable attenuation 0 - 6 dB at 1024 kHz Input jitter tolerance ITU-T G.823 Input return loss 12 dB in range 50 kHz to 100 kHz 18 dB in range 100 kHz to 2 MHz 14 dB above 2 MhzOutput Nominal impulse amplitude 2.37 V ± 0.237 V, 75 . Impulse shape according to ITU-T 15/G.703 Output jitter up to 100 kHz 0.25 UI p-p in range 18 kHz to 100 kHz 0.05 UI p-p

Power supply

DC input voltage –36 to –72 VPower consumption <5 W

Environmental conditions

Climatic conditions class 3.2 ETSITemperature -5ºC to +45ºC

Page 44: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

44

Universal VoIP Residential Gateway Solution

Up to 400 POTS analog subscribers (simultaneous VoIP-POTS conversions)

High speed broadband Ethernet Services

Media engine supports various voice coders

Enhanced voice processing and quality enhancement

Signalling engine - SIP

SUNCE and SNMP based TMN support

FMVP FLEXIBLE MULTIPLEXER VoIP PLATFORM

Ac

ce

ss

Sy

ste

ms

Page 45: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

45

Applications

FMVP is flexible multiplexer specially designed to enable voice services to residential subscriber over packet switched Ethernet and IP based network. The main 4 function of FMVP multiplexer are: Media Engine works on voice coding, Signalization Engine deals with signalization, Application Engine controls software applications and TDM Engine deals with analog and digital subscribers.

Device enables premium voice quality utiliz-ing versatile voice quality enhancement like voice detection, echo cancellation, packet loss conceal-ment, comfort noise generation etc. FMVP helps user to protect their existing investments in subscribers CPE equipment and enables smooth transition to new packet voice services while keeping subscriber infrastructure intact. Besides of VoIP services FMVP offers high speed Ethernet connection suitable to be used for IP DSLAM connectivity thus making the FMVP ideal packet voice and data provisioning platform.

Typically FMVP find application for:

Connecting residential subscribers to VoIP Soft Swtich

FMVP multiplexer is suitable to be used by:

Public telecommunication networks operators Public utility companies Large and medium sized companies Government offices and agencies

Features

Supports up to 400 subscribers Supports different voice coders: PCM, ADPCM,

GSM, Fax Relay Echo cancellation: per ITU-T G.168-2000

ECAN 10 ms, 16 ms, 32 ms, 128 ms

Voice detection: analyses voice activity to detect silence

Packet Loss Concealment: per ITU-T G.711 Appendix 1

Comfort Noise Generation: per ITU-T G.711 Appendix 2

Adaptive Jitter Buffer Manager: fully adaptive or static; dejitter and packet reordering

Audio Conferencing: support for 3 to N party audio conferences

DTMF Detect and Generate: per Bellcore GR-506-CORE, TIA 464-B, ITU-T Q.23 and Q.24

DTMF Relay: per RFC 2833 Call Progress Tone Handling:

per Bellcore GR-506-CORE, ITU-T Q.35 Integrated network management system, SNMP

and SUNCE support

User interfaces

Subscriber: analog: 2w FXS, 2w FXO, ISDN U Line Termination side

Auxiliary: Fast Ethernet

FM

VP

FLE

XIBL

E M

ULT

IPLE

XER

VoIP

PLA

TFO

RM

FMVP

EthernetIP

Core network

POTSPOTS

E 1

Ethernet

ISP

ISDN BRI

IP DSLAM

SOFT SWITCH

Subscriber units for

analog and digital

narrowband switched and

leased line services

POTS

ISDN BRI

100 BTX

100 BFX

100 BTX100 BFX

100 BTX100 BFX

100 BTX

100 BFX

Page 46: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

46

1 to 8 E1 links (V5)

Up to 24 E1 links (CAS)

Digital channel cross-connect (non blocking)

Remote multiplexers (CAS) connectivity to V5 interface (up to 660 subscribers)

Concentrator according to V5 .2 up to 2400 subscribers, for remote multiplexers and/or V5 .2 access nodes

Factory customerable CAS interface for non IRITEL multiplexers

V5CAS PROTOCOL CONVERTOR

Ac

ce

ss

Sy

ste

ms

Page 47: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

V5CASProtocolConvertor

Exchange

FM-MSAN

ISDN BRI

ISDN BRI

ISDN BRI

ATA 400

ATA 200

ATA 200

1 - 8 x E1V.5.2

3 x E1 (c)

2 x E1 (c)

2 x E1 (c)

ISDN BRI

ATA 120

ISDN BRI

4 x E1 2 x E1

FM2x2FM2x2

FM-MSAN

FM-MSAN

ATA 60

c - concentration up to 1:10

V5CAS Protocol convertor application

47

V5C

AS

PRO

TOCO

L CO

NVE

RTO

R

Applications

V5CAS Protocol convertor provide connection of access multiplexers FM-MSAN and FM2x2 with CAS signalling to telephone exchange with V5 protocol (V5.1/V5.2).

V5CAS enable economic solution to use telephone exchange’s V5.2 interfaces for connection access multiplexer with small number of subscribers (60 to 120).

V5CAS enable digital channel cross-connect (64 kbit/s) between all 24 E1 links.

Basic functions

Connections of remote access nodes: FM2x2 (multiplexer), FM-MSAN (concentrator) to exchange V5.2 interface

Digital channel cross-connect including corresponding signaling bits between all 24 links (2 Mbit/s) (non blocking)

Control channel (20 kbit/s or 64 kbit/s) transsmision via V5.2 interface

Configurations

FMV– multiplex, cross-connect, control and power supplay unit with V5.2 interface

PE1 – 8xE1 interfaces unit

PSH – 4 x SHDSL interface unit

Page 48: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Control and monitoring software

48

V5C

AS

PRO

TOCO

L CO

NVE

RTO

R

Control and monitoring

Integrated network management system SUNCE-M provides continuous management of V5CAS and all other IRITEL’s SDH and PDH equipment (FM-MSAN, FM2x2, ODS155, OTS622 ...).

For NMS system integration we support standard interface based on SNMP protocol.

Synhronization

From internal built-in oscillator (± 25 ppm)

From external 2 048 kHz clock

From received clock on any external link

Mechanical design

Unit (233x175x20 mm and 233x100x20mm)

V5CAS module (120x437x205 mm)

19”/ETSI cabinet (2200x600x300 mm)

Page 49: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FMV

4 x E1V5.2

4 x E1V5.2 F(Et)/Q2Et F(RS232)

(8 x E1, V5.2)

E1(E/M)Alarms Alarms

PE1

4 x E1V5.2

4 x E1V5.2

(8 x E1, V5.2)

Alarms E1(E/M)Alarms

49

V5C

AS

PRO

TOCO

L CO

NVE

RTO

R

T E C H N I C A L D A T A

E1 Tributaries2048 kbit/s according to ITU-T G.703, G.704 and G.706

E1 Service alarms according to E/M signalization standard

External clock reference

2048 kHz according to ITU-T G.703/10

TMN interfaceSUNCE-M (proprietary) F (RS232/V.24 or 10/100 BaseTX Ethernet), Q2 (RS485), Q2Et (10/100 bT)SNMP/V1/V2/V3 RFC 3895 (DS1/E1)

Operating temperature range -50 C up to +450 C (class 3.2)

Page 50: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

SHDSL#3,4

SHDSL#1,2

RemoteSupply

RS232Ethernet

Alarms

4 x E-1 G.703

50

G .shdsl interface: fractional n x 64 kbit/s from cross-connect field or 2 Mbit/s G .703 – G .shdsl interface converter

G .703 interface: unframed transparent mode or E1 framer mode

Ethernet over 1 to 4 SHDSL

Non-blocking 336 channels cross-connect field

LTU or NTU mode of G .shdsl operation

1 or 2 pairs G .shdsl operation

Multiplexers subscriber unit or standalone unit

PSH - SHDSL modem 4 x SHDSL, 4 x E1, 1 x Ethernet

Ac

ce

ss

Sy

ste

ms

Mod

ems

Page 51: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

LTS-X

LTS-E1

PSH

FMP

Pxx

PSH

FMP

PSH

FMP

PSHRouter

SDH/PDHnetwork

FMP

PSH

LTS-ET

Switch

LAN

Eth

Router

SHDSL

CENTRAL OFFICE

PBX

SHDSL

SHDSL

E1

E1

E1E1

1-4xE1

SHDSL

E1

E1

X.21

X.21

Eth

ATA

ISDN

...

. . .

E1

. . .

Multiplexer

Multiplexer

51

PSH

SH

DSL

mod

em

Application

Each G.shdsl interface has two modes of operation.

First mode is n x 64 kbit/s fractional operation, with bit-rate in range from 144 to 2312 kbit/s (G.shdsl subscriber application). In this mode some number of 64kbit/s channels can be assigned to Ethernet (Ethernet-over-G.shdsl application).

Second mode is 2.048 Mbit G.703 (without E1 framer/deframer) to G.shdsl transparent interface converter, with fixed line rate of 2.056 Mbit/s (G.703 range extension application), when paired with one of four G.703 interfaces.

G.shdsl interfaces can be paired to operate in 4-wire mode with maximum total data rate of 2.320 Mbit/s (shared between two copper pairs, 1160 Mbit/s each), if longer loop is needed.

PSH unit can operate as separate unit without FM-MSAN if all four G.703 – G.shdsl pairs operate as interface converters.

Basic characteristics

Four G.shdsl interfaces on board (ETSI SHDSL: ETSI TS 101 524, ITU-T G.shdsl: ITU-T G.991.2)

High symmetric line rate of maximum 2320 kbit/s utilizes 16-level TC-PAM modulation, with near-end echo-cancellation

LTU and NTU modes of G.shdsl

Line rates from 152 to 2320 kbit/s (144 to 2312 kbit/s subscriber data rate)

Flexible synchronization options

Connector for external remote power feed

LED alarm indication

Monitoring and management

PSH unit management is integrated in IRITEL network management system SUNCE-M, which incorporates:

Configuration

Alarm monitoring

Performance monitoring

T E C H N I C A L D A T AG.703 (2 Mbit/s) ITU-T G.703/G.704

Input Signal 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Loss 0 to 6 dB at 1024 kbit/s Jitter according to ITU-T G.823 Return loss according to ITU-T G.703/9.3

Output Signal 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Impulse level 2.37 V ±0.237 V, 75 Ω 3 V ±0.3 V, 120 Ω Impulse width 244 ns Impulse shape according to ITU-T 15/G.703 Jitter according to ITU-T G.823

G.shdsl interface ETSI TS 101 524, ITU-T G.991.2

Transmission symmetrical duplexTransmission medium one or two (4-wire mode) twisted pairsModulation TC-PAMLine rate 152 kbit/sto 2320 kbit/sMaximum loop length - 0.4 mm copper wire 152 kbit/s 6000 m 2320 kbit/s 2200 m - 0.8 mm copper wire 152 kbit/s 17000 m 2320 kbit/s 6300 m

Page 52: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

52

NTX is ISDN NT1 modem with U interface (2B+D), 64, 128, 144 kbit/s

Enables connectivity of distant DTE devices with X .21 interface to telecommunication network, using existing access multiplexers FM2x2 or FM-MSAN with PIU-LT or PN64 tributary units

Point to point connection of devices based on X .21 interface using single twisted pair transmission medium (NTX LT and NT mode)

NTX iDSL modem with X.21 interface

Ac

ce

ss

Sy

ste

ms

Mod

ems

Page 53: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

53

NTX

iD

SL m

odem

with

X .2

1 in

terf

ace

Basic features

One ISDN BRI U Line Termination (LT) or Network Termination (NT) interface with maximum user throughput of 144 kbit/s

Single copper pair transmission by using 2B1Q line code with near end echo cancellation

Automatic or manual Embedded Operation Channel management

Accepts remote power supply provided by LT side

One X.21 interface, contradirectional, DCE or DTE type for 64, 128 or 144 kbit/s transmission

In DCE mode synchronization is on internal reference

In DTE mode synchronization on X.21 S timing signal

Management thought the PC Graphical User Inter-face based application via RS232 interface

Front panel LED alarm and basic configuration status display

Testing and performance facility

Built In Self Test

Local and Remote test loops.

Far End and Near End Block Error monitoring

Desktop mountable case

External (220/110V AC/unregulated 5V DC) or (-48 V DC/5V DC) adapter options

Applications

NTX is basic ISDN NT1 modem with U interface (2B+D). In modem version NTX enables connectivity of distant DTE devices with X.21 interface by using the existing telecommunication network. Access to the existing network could be realized by using Flexible Multiplexer FM2x2 or FM-MSAN through the proper tributary units like PIU-LT or PN64. In this par-ticular application NTX is Network Terminating (NT) device while tributary unit performs ISDN BRA Line termination (LT). Line Termination side, PIU-LT cards, besides of all other LT functionality provides remote power for NTX devices.

Another typical NTX devices application is bidirectional point to point connection by using single twisted pair transmission medium. Typically this configuration is suitable for direct routers connection in campus or other similar inter-building applications. In order to connect distant routers it is necessary to configure NTX device in one, for instance central or corporate site, in X.21 DCE and ISDN U LT mode. The other NTX, remote device, have to be configured as, X.21 DCE and ISDN U NT. In this case synchronization is obtained from internal reference at the ISDN U LT side; NT side is always synchronized to the peering LT device. Also by adding Remote Power Supply (RPS) device it is possible to power both NTX devices.

T E C H N I C A L D A T AISDN U interface ITU-T G.960, G.961

Transport type duplex Transport medium one twisted-pair Line code 2B1Q Line speed 80 kboud ± 100 ppm 64kbit/s channels per interface 2,5 Maximum line attenuation at 40 kHz 36 dBm at 80 kHz 45 dBm Maximum line resistance without repeaters 1048 Ω with repeaters 1300 + 700 Ω Synchronization frame 1.5 ms multiframe 12 ms Scrambling 1 + X-18 + X-23 CRC12 X12 + X11 + X3 + X + 1 Remote power 105 V

RS232 interface ITU-T V.24, V.28

X.21 interface ITU-T X.21/27, V.11

Transport type duplex Transport medium 6 twisted-pair Connector 15 pin SUBD female Line rate 64, 128, 144 kbit/s Maximum line length 128 kbit/s 1300 m Copper pair termination DCE Transmit (R, S, I) 120 Ω DCE Receive (T, X, C) 120 Ω

Power External AC/DC adapter 220V ac/6V dc Remote power supply 40-105 V Power consumption up to 1 W

Temperature -50 C to +450 C

Dimensions 178 x 131.5 x 36 mm

Page 54: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Eth. Bridge #1

100

bFX

10/1

00 b

T

Eth. Bridge #2

2 x 2 Mbit/sG.703

10/1

00 b

T

100

bFX

Main alarms

Control signals

Control signals

54

Two independent Ethernet E1 Bridge

Provides connection of remote LAN networks with Ethernet 10/100 BaseTX or 100 BaseFX interface via telecommunication network with G .703, 2 Mbit/s interface

Easy configuration

Integrated control and monitoring, SUNCE-M

KGET TWO INTERFACE CONVERTORS Ethernet over E1

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Inte

rfac

e Co

nver

ter S

erie

s

Page 55: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

KGET SDH/PDHnetwork KGET

Switch

LANEth

LAN

EthSwitch

Router

E1E1

RouterE1 E1

LAN

Eth

Switch

Router

Eth

LAN

Switch

Router

55

KG

ET

INTE

RFA

CE C

ON

VERT

ORS

- Et

hern

et o

ver E

1

Applications

The main application of KGET Interface Convertor is to connect devices with Ethernet interface through telecommunication network. Any of two Interface Convertor realize Ethernet Bridge function or Switch function at layer 2.

Basic functions

Two independent Interface Convertors on one unit.

Any of two Interface Convertor realize Ethernet Bridge function with 2048 kbit/s maximum WAN interface capacity.

At Ethernet side there are two ports: electrical 10/100 BaseTX interface and optical 100 BaseFX interface.

Electrical Ethernet interfaces are half/full duplex with auto negotiation procedure which define the type of interface 10 or 100 Mbit/s.

Interface Convertors are transparent for all higher order protocol (TCP-IP, XNS, ISO,...).

VLAN can be configured for any port independently.

Support for QoS priority choice according to the port or IEE802.1p

Synchronization: local clock or external clock from received G.703 signal.

Loop test possibility.

Integrated control and monitoring using OLC unit.

T E C H N I C A L D A T AG.703 (2 Mbit/s)

Input

Signal type 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Cable attenuation 0 to 6 dB at 1024 kbit/s Input jitter according to ITU-T G.823 Reflection attenuation according to ITU-T G.703/9.3Output

Signal type 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Impulse level 2,37 V ±0,237 V, 75 Ω 3 V ±0,3 V, 120 Ω Impulse width 244 ns Impulse shape according to ITU-T 15/G.703 Output jitter according to ITU-T G.823

Ethernet 10-100 BaseTX

Transport type duplex

Electrical characteristics IEEE 802.3Transmission symmetricalSection length (UTP cable class 5) 135 mConnector RJ45

Ethernet 100 BaseFX SFP plug-in module

Transport type duplex

Optical characteristics IEEE 802.3Transmission singlemode optical fiberSection length 2000 mConnector SC

Page 56: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

56

Provides connection of remote LAN networks with Ethernet 10/100 BaseTX or 100 BaseFX interface via telecommunication network with G .703, 2 Mbit/s interface

Easy configuration

Integrated control and monitoring, SUNCE-M

KGET8 INTERFACE CONVERTOR Ethernet over 8 x E1

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Inte

rfac

e Co

nver

ter S

erie

s

Page 57: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

KGET8 SDH/PDHnetwork KGET8

Switch

LAN

EthLAN

EthSwitch

Router

1-8xE1...

1-8xE1... Router

57

KG

ET8

INTE

RFA

CE C

ON

VERT

OR

- Eth

erne

t ove

r 8 x

E1

Applications

Connection of remote LAN networks with Ethernet interface

Connection of small capacity IP DSLAM to IP Switch

IP DSLAM and IP Base station backup/backhaul

Remote corporative networks LAN connection

Basic functions

Enables connection of remote Ethernet networks with 8 x E1 links

Broadband service based on Ethernet technology for existing TDM PDH and SDH network

For TDM transmission maximum capacity of non framing E1 signal is used

Interface Convertor realize Ethernet Bridge function with 8 x 2048 kbit/s maximum WAN interface capacity

At Ethernet side there are two ports: electrical 10/100 BaseTX interface and optical 100 BaseFX interface

Electrical Ethernet interfaces are half/full duplex with auto negotiation procedure which define the type of interface 10 or 100 Mbit/s

Interface Convertors are transparent for all higher order protocol (TCP-IP, XNS, ISO,...)

VLAN can be configured for any port independently

Support for QoS priority choice according to the port or IEE802.1p

Loop test and signal generation possibility

Integrated control and monitoring using OLC or FMV unit.

Card option ready to be used in standard ETSI or 19” shelves

Stand alone, rack or desktop mounting options

T E C H N I C A L D A T AG.703 (2 Mbit/s)

Input

Signal type 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Cable attenuation 0 to 6 dB at 1024 kHz Input jitter according to ITU-T G.823 Reflection attenuation according to ITU-T G.703/9.3Output

Signal type 2048 kbit/s ±50 ppm (HDB3) Impedance 75 Ω/120 Ω Impulse level 2,37 V ±0,237 V, 75 Ω 3 V ±0,3 V, 120 Ω Impulse width 244 ns Impulse shape according to ITU-T 15/G.703 Output jitter according to ITU-T G.823

Ethernet 10-100 BaseTX

Transport type duplex

Electrical characteristics IEEE 802.3Transmission symmetricalSection length (UTP cable class 5) up to135 mConnector RJ45

Ethernet 100 BaseFX SFP plug-in module

Transport type duplex

Optical characteristics IEEE 802.3Transmission singlemode optical fiberSection length up to 2000 mConnector SCProtocols

HDLC X.86/LAPS ML-PPPIEEE 802.1D bridgingIEEE 802.1p QoSIEEE 802.1Q VLANPower supply 48 Vdc or 220 VacOperating temperature range -5⁰ C up to +45⁰ C (class 3.2)

Page 58: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

58

Transparent Ethernet connection over existing TDM infrastructure

Provides Ethernet connection over up to 16 E1

GFP, VCAT and LCAS encapsulation and bonding for up to 16 groups

QoS and SLA Support for Ethernet subscribers

Feature rich diagnostics and fault management on all TDM and Ethernet ports

Monitoring and Configuration via embedded Web Server and SNMP

KGET4/8/16 ETHERNET ACCESS INTERFACE CONVERTOR Ethernet over up to 16x E1 with GFP, VCAT and LCAS

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 59: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

59

KG

ET4/

8/16

ETH

ERN

ET A

CCES

S IN

TERF

ACE

CO

NVE

RTO

R

Applications

High Capacity Transparent Ethernet Service over existing PDH/SDH networks

IP DSLAM, WiMAX and Mobile Base station backhaul

Remote corporative networks LAN connection

Basic features

KGET16 complies to the latest NG-PDH standards

KGET16 provides transparency for all higher order protocols (TCP-IP, XNS, ISO,...)

Generic Framing Procedure (GFP) enables efficient Ethernet packet encapsulation and TDM bandwidth utilization

Virtual Concatenation (VCAT) provides flexible bandwidth allocation for different subscribers by bonding multiple E1 links into single virtual pipe

Link Capacity Adjustment Scheme (LCAS) enables smooth virtual pipe capacity change, by adding or removing E1 links from the pipe, without traffic loss

VLAN capabilities includes stacking and striping for both ingress and egress traffic for all ports independently thus keeping user VLAN settings unchanged. Management traffic can be isolated from user traffic with separate VLAN

QoS support includes per port VLAN based priority or QoS based on IEE802.1p enabling fine traffic shaping in order to fulfill user requirements for delay sensitive real time voice or video applications

KGET16 provides local port and in band capacity for remote management via embedded Web Server. For TMN purposes device provides SNMP agent

E1 port test facility includes loop tests and signal generation and error measurements. All E1 ports under tests are excluded from VCAT LCAS groups thus preventing Ethernet loop storms.

T E C H N I C A L D A T AE1, G.703 (2 Mbit/s)

Number of ports 4, 8, 16

Connector RJ45

Input

Signal type 2048 kbit/s ±50 ppm (HDB3)

Impedance 75 Ω/120 Ω

Cable attenuation 0 to 6 dB at 1024 kHz

Input jitter according to ITU-T G.823

Reflection attenuation according to ITU-T G.703/9.3

Output

Signal type 2048 kbit/s ±50 ppm (HDB3)

Impedance 75 Ω/120 Ω

Impulse level 2.37 V ±0.237 V, 75 Ω 3 V ±0,3 V, 120 Ω

Impulse width 244 ns

Impulse shape according to ITU-T 15/G.703

Output jitter according to ITU-T G.823

Ethernet 10-100 BaseTX

Number of ports 2, 4

Transport type duplex

Electrical characteristics IEEE 802.3

Transmission symmetrical

Section length (UTP cable class 5) up to135 m

Connector RJ45

Ethernet 100 BaseFX SFP plug-in module

Number of ports 0, 2

Transport type duplex

Optical characteristics IEEE 802.3

Transmission singlemode optical fiber

Section length up to 2000 m

Connector SC

Protocols

Encapsulation GFP, G.7041 GFPoPDH, G.8040

Bonding VCAT G7043 LCAS, G.7042

Delay Compensation up to 250 ms

Page 60: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

60

Transparent Ethernet connection over existing TDM infrastructure with built in AES Encryption

Per E1 port configurable AES128/192/256 encryption module with flexible key and access management

Provides Ethernet connection over up to 16 E1

GFP, VCAT and LCAS encapsulation and bonding for up to 16 groups

QoS and SLA Support for Ethernet subscribers

Feature rich diagnostics and fault management on all TDM and Ethernet ports

Monitoring and Configuration via embedded Web Server and SNMP

KGET4/8/16S ETHERNET ACCESS INTERFACE CONVERTOR Ethernet over up to 16x E1 with GFP, VCAT, LCAS and Encryption

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 61: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

61

KG

ET4/

8/16

S E

THER

NET

ACC

ESS

INTE

RFA

CE C

ON

VERT

OR

Applications

Secured High Capacity Transparent Ethernet Service over existing PDH/SDH networks for government, financial and other institutions that requires secured data transmission over public telecommunication network.

IP DSLAM, WiMAX and Mobile Base station backhaul for public and private users

Secured remote corporative networks LAN connection

Basic features

KGET16S complies to the latest NG-PDH standards

KGET16S provides transparency for all higher order protocols (TCP-IP, XNS, ISO,...)

Advanced Encryption Standard (AES) provides high confidence level of data security over public telecommunication network. Each E1 link at the device is possible to configure to perform data encryption with different key length, key manage-ment and key schedule. Encryption procedure in-cludes key exchange, authentication and user data encryption. Each phase of encryption procedure uses their own key.

Generic Framing Procedure (GFP) enables ef-ficient Ethernet packet encapsulation and TDM bandwidth utilization

Virtual Concatenation (VCAT) provides flexible bandwidth allocation for different subscribers by bonding multiple E1 links into single virtual pipe

Link Capacity Adjustment Scheme (LCAS) enables smooth vir tual pipe capacity change, by adding or removing E1 links from the pipe, without traffic loss

VLAN capabilities includes stacking and striping for both ingress and egress traffic for all ports independently thus keeping user VLAN settings unchanged. Management traffic can be isolated from user traffic with separate VLAN

QoS support includes per port VLAN based priority or QoS based on IEE802.1p enabling fine traffic shaping in order to fulfill user requirements for delay sensitive real time voice or video applications

KGET16S provides local port and in band capacity for remote management via embedded Web Server. For TMN purposes device provides SNMP agent

E1 port test facility includes loop tests and signal generation and error measurements. All E1 ports under tests are excluded from VCAT LCAS groups thus preventing Ethernet loop storms

T E C H N I C A L D A T AE1, G.703 (2 Mbit/s)

Number of ports 4,8,16

Connector RJ45

Input

Signal type 2048 kbit/s ±50 ppm (HDB3)

Impedance 75 Ω/120 Ω

Cable attenuation 0 to 6 dB at 1024 kHz

Input jitter according to ITU-T G.823

Reflection attenuation according to ITU-T G.703/9.3

Output

Signal type 2048 kbit/s ±50 ppm (HDB3)

Impedance 75 Ω/120 Ω

Impulse level 2.37 V ±0.237 V, 75 Ω 3 V ±0,3 V, 120 Ω

Impulse width 244 ns

Impulse shape according to ITU-T 15/G.703

Output jitter according to ITU-T G.823

Ethernet 10-100 BaseTX

Number of ports 2,4

Transport type duplex

Electrical characteristics IEEE 802.3

Transmission symmetrical

Section length (UTP cable class 5) up to135 m

Connector RJ45

Ethernet 100 BaseFX SFP plug-in module

Number of ports 0,2

Transport type duplex

Optical characteristics IEEE 802.3

Transmission singlemode optical fiber

Section length up to 2000 m

Connector SC

Protocols

Encapsulation GFP, G.7041 GFPoPDH, G.8040

Bonding VCAT G7043 LCAS, G.7042

Delay Compensation up to 250 ms

AES NIST, FIPS197

Page 62: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

62

Performs TDM circuit emulation over enterprise or carrier packet-switched Ethernet L2/L3 networks for different types of user interfaces

At the Ethernet line side supports both electrical Fast and optical 100 FX Ethernet interface

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet .

Compliant with IETF, ITU-T, MFA Forum and Metro Ethernet Forum Technical Specifications

Recovered clock jitter and wander compliant to ITU-T G .823, G .824 . Supports adaptive clock recovery, differential clock (common clock) (using RTP)

Lost/misordered packet compensation

Embedded Web Server and SNMP Agent

Optional AES 128/192/256 Encryption of TDM Stream

KTP INTERFACE CONVERTOR SERIES TDM over IP

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 63: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Ethernet L x E1 (V5.2)IP = 10.0.1.2

MSAN

Ethernet

`

Residential UserAnalog

/ADSL

SoftSwitch

Ethernet

Ana

log

Analo

g

ISDN BRA/ADSL

E-Commerce

ADSL/SHDSL

ISDNBRA

`

Residential User

Ethernet IPMETRO Ethernet

MPLS

BTS

PHONE - GSM

PHONE - GSM

PHONE - GSM

PDA - GPRS

BSC

PHONE - GSM

Ethernet

Ethernet

IP = 10.0.1.1

E1

nxE1

IP = 10.0.1.3

TDMCO Switch

Kx

E1(SS7)

Lx

E1(V5.2)

K x E1 (SS7)

63

KTP

IN

TERF

ACE

CO

NVE

RTO

R SE

RIES

TD

M o

ver I

P

Applications

KTP devices performes TDM circuit emulation over packet switched network thus enabling transparent TDM services over enterprise or carrier Ethernet network.

Besides TDM traffic transmission over IP based networks KTP provides many value-added functions in order to meet different customers needs including different network management capabilities, traffic protection, synchronization etc.

In carrier network KTP typically finds applications for:

TDM services over Ethernet MAN, broadband wireless, CATV

2G / 2.5G cellular backhaul over IP/MPLS HDLC-based traffic (ex. Frame Relay) trunking

over IP/MPLS PSTN-IP network bridging SS7 transport over IP

In enterprise applications KTP is suitable to be used for:

Private line/toll bypass via Ethernet MAN TDM PBX migration to Ethernet MAN

In access networks KTP typically finds application as Multi Tenant Multi Dwelling Unit MTU/MDU

Basic functions

Broad range of, framed or unframed, PDH tributary interfaces

One 10/100 electrical and one 100 optical Ethernet interface

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet

Recovered clock jitter and wander compliant to ITU-T G.823, G.824 synchronization interface

Lost/misordered packet compensation

Compliant with:

IETF PWE3 Internet drafts for SAToP, TDMoIP, CESoPSN, HDLC

ITU-T Recommendations Y.1413 and Y.1414 (clause 10) Y.1453, Y.1452.

MFA Forum Implementation Agreements 4.1, 5.1 and 8.0.0

Metro Ethernet Forum Technical Specification MEF8

Supports adaptive clock recovery, differential clock (common clock) (using RTP)

Embedded Web Server and SNMP Agent

Ordering codesKTP- I - P - S

I - interface:X - X21/V.11 codirectional or contradirectional

n x 64 kbit/s over IPV - V.35N - NRZ, NATO, 75 Ω, n x 64 kbit/s over IPE1 - E1 over IP2E1 - 2 x E1 over IP4E1 - 4 x E1 over IPE3 - E3 over IP

P - power option:D - 48 Vdc desktop unitN - 220 Vac with external AC/DC adapterR - card - rack version

S -encryption option: - no encryptionS - with encryption

Page 64: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

64

Performs TDM circuit emulation over enterprise or carrier packet-switched 1G Ethernet L2/L3 networks for different types of user interfaces

At the Ethernet line side supports one 10/100 BaseTx, one 100 BaseFx, two 1000 BaseT and one 1000 BaseX Ethernet interfaces

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet .

Compliant with IETF, ITU-T, MFA Forum and Metro Ethernet Forum Technical Specifications

Recovered clock jitter and wander compliant to ITU-T G .823, G .824 . Supports adaptive clock recovery, differential clock (common clock) (using RTP)

ToS support for IP level priority, VLAN 802 .1p and 802 .1Q support for MAC level priority

Lost/misordered packet compensation

Embedded Web Server and SNMP Agent

Optional AES 128/192/256 Encryption of TDM Stream

KTG INTERFACE CONVERTOR SERIES TDM over IP

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 65: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Ethernet L x E1 (V5.2)IP = 10.0.1.2

MSAN

Ethernet

`

Residential UserAnalog

/ADSL

SoftSwitch

Ethernet

Ana

log

Anal

og

ISDN BRA/ADSL

E-Commerce

ADSL/SHDSL

ISDNBRA

`

Residential User

Ethernet IPMETRO Ethernet

MPLS

BTS

PHONE - GSM

PHONE - GSM

PHONE - GSM

PDA - GPRS

BSC

PHONE - GSM

Ethernet

Ethernet

IP = 10.0.1.1

E1

nxE1

IP = 10.0.1.3

TDMCO Switch

Kx

E1(SS7)

Lx

E1(V5.2)

K x E1 (SS7)

1 G

KTG

KTG

KTG

16 x Fast

16 x Fast

1 G

1 G

65

KTG

IN

TERF

ACE

CO

NVE

RTO

R SE

RIES

TD

M o

ver I

P

Applications

KTG devices performes TDM circuit emulation over packet switched network thus enabling transparent TDM services over enterprise or carrier Ethernet network.

Besides TDM traffic transmission over IP based networks KTP provides many value-added functions in order to meet different customers needs including different network management capabilities, traffic protection, synchronization etc.

In carrier network KTG typically finds applications for:

TDM services over Ethernet MAN, broadband wireless, CATV

2G / 2.5G cellular backhaul over IP/MPLS HDLC-based traffic (ex. Frame Relay) trunking

over IP/MPLS PSTN-IP network bridging SS7 transport over IP

In enterprise applications KTG is suitable to be used for:

Private line/toll bypass via Ethernet MAN TDM PBX migration to Ethernet MAN

In access networks KTP typically finds application as Multi Tenant Multi Dwelling Unit MTU/MDU

Basic functions

Broad range of, framed or unframed, PDH tributary interfaces

One electrical Fast Ethernet 10/100 BaseTx and one optical Fast Ethernet 100 BaseFx interfaces, two 1G electrical and one 1G optical Ethernet interfaces

Multiprotocol encapsulation supporting IPv4, IPv6, UDP, RTP, L2TPv3, MPLS and Metro Ethernet

Recovered clock jitter and wander compliant to ITU-T G.823, G.824 synchronization interface

Lost/misordered packet compensation

Compliant with:

IETF PWE3 Internet drafts for SAToP, TDMoIP, CESoPSN, HDLC

ITU-T Recommendations Y.1413 and Y.1414 (clause 10) Y.1453, Y.1452.

MFA Forum Implementation Agreements 4.1, 5.1 and 8.0.0

Metro Ethernet Forum Technical Specification MEF8

Supports adaptive clock recovery, differential clock (common clock) (using RTP)

Embedded Web Server and SNMP Agent

Ordering codesKTG- I - P - S

I - interface:X - X21/V.11 codirectional or contradirectional

n x 64 kbit/s over IPV - V.35N - NRZ, NATO, 75 Ω, n x 64 kbit/s over IPE1 - E1 over IP2E1 - 2 x E1 over IP4E1 - 4 x E1 over IPE3 - E3 over IP

P - power option:D - 48 Vdc desktop unitN - 220 Vac with external AC/DC adapterR - card - rack version

S -encryption option: - no encryptionS - with encryption

Page 66: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

66

Ac

ce

ss

Sy

ste

ms

GMC-2U Unmanaged Gigabit SFP Media Converter

Configurable Link-Fault-Pass-Through and fiber auto/force mode

8192 MAC addresses

Supports 802 .3/802 .3u/802 .3ab/802 .3z/802 .3x . Auto-negotiation and Auto MDI/MDIX .

Full wire-speed forwarding rate

Supports 10k Jumbo packet size

Suitable for traffic control and industrial applications in hazardous environment

Page 67: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

67

IntroductionIRITEL GMC-2U Hardened SFP Media Converter provides solution for rugged environments, transportation road-side cabinets, industrial shop floors, multi tenant dwellings or Fiber To The Home (FTTH) applications. Capable of operating at temperature extremes of -20°C to +60°C, this is by far the media converter of choice for harsh environments in which space constraints exist.

Plug-and-Play Solution:

The hardened media converter is a plug-and-play compact media converter which doesn’t have any complicated software to set up.

Applications Network distance extension

Extend the network distance between two twisted pair Gigabit Switches and/or a Gigabit File Servers with 1000 Base-T interfaces.

Fiber Mode-ConditioningGigabit Fiber Mode-Conditioning and/or extend the network distance between two twisted pair Gigabit Switches and optical Gigabit Switches/File Servers.

Technical data

Connecting Ethernet Ports

Connect copper port

Plug RJ-45 jack Connect optical port

Use SFP transceivers supplied by IRITEL or other manufacturers of MSA compliant SFPs.

Insert 1G SFP module into the cage. Plug optical connector into the SFP.

Supports Desktop, DIN-Rail, Panel, or Rack Mounting installation

Specifications

Applicable Standards

IEEE 802.3 10Base-TIEEE 802.3u 10Base-TXIEEE 802.3ab 1000Base-TIEEE 802.3z 1000Base-SX/ LX/ BX

Fixed Ports One copper port, one fiber port

Speed

10Base-T 10/20Mbps for half/full-duplex10Base-TX 100/200Mbps for half/full-duplex1000Base-T 2000Mbps for full-duplex1000Base-SX/LX/BX 2000Mbps for full-duplex

Cable 1000Base-T 4-pair UTP/STP Cat. 5 up to 100m

Fiber 1000Base-XMulti mode 50 or 62.5μmSingle mode 9 or 10μm

LED Indicators

Per unit Power Good (PG)Fiber port Link and Activity (LINK/ACT)

Copper portLink and Activity (LINK/ACT)Speed 10/100/1G (SPEED)

DimensionsWidth 78mmDepth 27mmHeight 120mm

Weight 220.5 gr

PowerDC Jack 5VDC, External AC/DC reqiredMax. Current 0.88A

Power Consumption 3WOperating Temperature -20°C ~ 60°CStorage Temperature -40°C ~ 85°CHumidity 5 ~ 95%, non-condensing

Page 68: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

68

Ethernet over TDM Bridge

Provides connection of remote LAN networks with Ethernet 10/100 BaseTX or 100 BaseFX interface via PDH/SDH telecommunication network

Different TDM interface support:

G .703, E1, E3, DS-3, OC-3, V .11, V .35, NRZ

SHDSL, SHDSL .bis compliant to EFM applications

Embedded Web Server and SNMP Agent

Optional AES 128/192/256 Encryption of TDM Stream

KFE INTERFACE CONVERTOR SERIES Ethernet over TDM

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 69: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

69

KFE

IN

TERF

ACE

CO

NVE

RTO

R SE

RIES

Eth

erne

t ove

r TD

M

Applications

KFE devices enables connectivity of different equipment with Ethernet interface by utilizing existing TDM or copper infrastructure.

Interface converter KFE basically performs L2 (layer 2) Ethernet Bridge/Switch functionality thus making them transparent for all higher layer protocols.

KFE devices in both, public and private networks, typically find applications for:

Remote LAN segments connection

Campus Corporate Interbuilding

Subscriber connection to Internet Service Provider

ISP hosting Remote terminal connections.

Point of Sell, POS, and info terminals Automated Teller Machine (ATM) Electronic payment systems, parking, pay tool…

Remote video surveillance

Schools, universities Stadiums or sport arenas Cultural and other public institutions, museums, Galleries Warehouses, shopping centres

Process control in private in public utility companies

Railway Distribution and transmission of electricity Oil and gas utilities

For traffic control at

Big junctions, crossroads Bridges and tunnels Crowded roads Highways

In special systems requiring data encryption

Army Police Government institutions and agencies

Basic functions

Enable transparent Ethernet service over TDM/copper infrastructure

At Ethernet side there are two ports: electrical 10/100 BaseTX interface and optical 100 BaseF interface

Electrical Ethernet interfaces are half/full duplex with auto negotiation procedure which define the type of interface 10 or 100 Mbit/s

Interface Convertors are transparent for all higher order protocol (TCP-IP, XNS, ISO,...)

V L A N c a n b e co n f i g u re d fo r a ny p o r t independently

Support for QoS priority choice according to the port or IEE802.1p

Synchronization: local clock or external clock from received signal

Optional AES 128/192/256 Encryption of TDM Stream

Loop test possibility

Ordering codesKFE- I - P - SI - interface:

X - Ethernet over X21/V.11 codirectional or contradirectional n x 64 kbit/s

V - V.35

N - Ethernet over NRZ, NATO, 75 Ω, n x 64 kbit/s

E1 - Ethernet over E1

E3 - Ethernet over E3

2E3 - Ethernet over 2 x E3

S1 - Ethernet over one copper pair

S2 - Ethernet over 2 copper pairs

S4 - Ethernet over 4 copper pairs

P - power option:D - 48 Vdc with external DC/DC adapter

N - 220 Vac with external AC/DC adapter

R - card - rack version

S -encryption option: - no encryption

S - with encryption

Page 70: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

70

Device enables user to connect their equipment over exchangeable user interface module via TDM E1 based telecommunication network

Built in non blocking cross connect enables easy and cost effective add-drop of user interface traffic over spare, non used, E1 time slots with minimum delay including CAS signalling

Basic Features:

2 Е1 framed or non framed interfaces .

1 factory exchangeable user interface module with different number and/or interface types

Non blocking cross connect between E1 links and user interface modules including CAS signaling, where applicable

Different user interface modules with: X .21/V11, V .35, NRZ/NATO, RS232 synchronous and asynchronous interfaces

Embedded Web server for local managamnet

Embedded SNMP agent for TMN application

Optional AES 128/192/256 encryption of user interface data

KG Universal TDM, E1 interface converter platform, fractional multiplexer, cross connect device with exchangeable user interface module and optional built-in AES encryption

Ac

ce

ss

Sy

ste

ms

Ethe

rnet

Acc

ess

and

Man

aged

Inte

rfac

e Co

nver

ter S

erie

s

Page 71: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

KG-V

SDH/PDHE1

network

E1LAN

Switch

Router

Switch

LANV.35

Router

KG-V

V.35

E1

KG-NE1

NRZNATO

Server

KG-X

KG-RRS232

X.21

KG-NE1

NRZNATO

Info terminal

KG-X KG-R

E1

E1

E1

RS232X.21Video

Surveillance

E1

71

KG

Uni

vers

al T

DM

, E1

inte

rfac

e co

nver

ter p

latf

orm

, fra

ctio

nal

mul

tiple

xer,

cros

s co

nnec

t dev

ice

and

optio

nal A

ES e

ncry

ptio

n

Application

KG Series Interface Converter is usually used for connecting different devices through a transport TDM digital network that is based on the E1 interface.

In public and private telecommunication networks KG Series typically finds application for:

Connecting remote LAN segments

Connecting users to ISP

Connecting remote terminals

Remote video surveillance

Industrial process control.

Traffic control.

SCADA systems

In special service networks which requires data encryption.

Basic features

The device convert user signal from removable interface modules to E1 signal in one of two E1 network interfaces and vice versa

Е1 links can be configured to work in framed and unframed mode

Maximum conversion speed in unframed mode is 2048 kbit/s

In framed mode it is possible to perform the ca-pacity allocation of user signal from removable module to one of the E1 network interface in 64 kbit/s steps

Unassigned capacity of E1 link can be mutually cross-connect or unlocated E1 link can be used as a protection link (1+1)

Advanced fault diagnosis (loop test, integrated BER tester) of E1 and user interfaces

The device can be synchronized from received E1, external reference or from received signal of user (synchronous serial) interface

Control of remote devices in framed mode; allocating appropriate capacity of E1 signal to the system for centralized monitoring

Content from the user interface can be encrypt or decrypt before mapping to the desired E1 direction

The desktop version of the device can be used independently as an interface converter

In board version of the device can be used as an independent interface converter, or as a part of fractional multiplexer, which in itself combines multiple interface converters with an appropriate user interfaces

Centralized monitoring and supervision based on the standard packet protocols, SNMP, HTTP, ICMP...

Ordering codes

KG-I-P-SI - Digital Interface: E – Ethernet X – X.21 codirectional or contradirectional V – V.35 R/2R – 1/2 x RSR232 asynchronous and synchronous N – NRZ/NATO, 75/50 Ω C/2C – 1/2 x G.703 codirectional DIO – 8 digital inputs / outputs - Analog interfaces: FXS – analog telephone, user side FXO – analog telephone, exchange side E&M – 2w/4w analog exchange side AIO – 8 analog inputs / outputsP - Power Option D – 48 Vdc with external DC/DC adapter N – 220 Vac with external AC/DC adapter R – card - rack versionS - Encryption Option – no encryption S – with encryption

Page 72: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

72

Ac

ce

ss

Sy

ste

ms

SMH884 - FPX High Performance, 20 port, PoE enabled L2/L3 Fully Managed Ethernet Switch with Fast Hardware based Failover on Optical Links

Provides 8 electrical Ethernet 10/100 BaseTX, 8 electrical PoE 10/100 BaseTX and 4 Optical SFP 100 BaseFX interfaces

Provides up to 125 W of power and automatic sensing and power consumption classification for 8 remotely powered devices (PD), 15 .4 W per port

Optical SFP 100 BaseFX interfaces can be configured to work in pure hardware controlled, 1+1 protection mode, thus enabling fast, less than 50 ms, traffic restoration

Compliant with IEE802 .3, IEE802 .3u and IEE802 .3af standards

Performs wire speed Ethernet Switching function between all user ports, Ethernet 10/100 BaseTX and 100 BaseFX

Traffic protection through STP, RSTP and MSTP protocol

Class of service (CoS) with 4-level priority queuing Full duplex, Half duplex Flow Control

Automatic address learning, address aging and address migration

Static MAC address filtering, MAC address management Up to 12 K MAC address space

(different MAC addresses) Storm control, broadcast and multicast flooding GARP VLAN registration protocol (GVRP) Port trunking support, Link Aggregation Group (LAG) Software/Firmware field upgrade support,

gold configuration backup and restore SNMP1/2 based network management interface Management thought Embedded Web Server

accessible via standard WEB browser User name and password based security 19” Rack and Desktop mountable metal

housing, IP30 protection Rear access to all user connectors, LED

indication at front panel of device External input and output alarm contacts Extended temperature and tropicalized interior

against excessive humidity Redundant DC 48V power supply option

Man

aged

Eth

erne

t Sw

itch

Ser

ies

Page 73: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

73

Description

IRITEL SMH884-FPX is hardened, 20 port, fully Managed, Power over Ethernet (PoE) enabled, High Performance Ethernet L2/L3 Switch designed to operate in harsh environments.

T E C H N I C A L D A T AEthernet Interface

According to IEEE 802.3 Ethernet 10/100Base-TX:Interface type duplex Electrical characteristics IEEE 802.3 Transfer symmetrical Range(UTP CAT5) 135 m Isolation 1500 Vrms/50Hz/60s according to IEC EN 60950 Connector standard RJ45

Power over Ethernet:Power delivery mode Mode A, phantom Power range Type 1 Maximum delivered power 15.40 W Maximum power at PD 12.95 W Maximum current 350 mA Maximum cable resistance (CAT 3 20 Ω

Voltage Range 44 - 57 V

Ethernet 10/100Base-FX:Transport type duplex Electrical characteristics IEEE 802.3 Transport medium single mode optical fiber multimode fiber (option)

Optical SFP Ethernet interfaces SFP Plug in Tranceiver Type 1 OI.S1A1 Connector type LC Transmitter type 1310 nm FPLD Output power -15 to -8 dBm

PoE IP Camera

PoE IP Camera

PoE IP Camera Non-PoE Camera

PoE IP CameraCentre of Surveillance

IP Camera

IP Camera

PoE IP Camera

PoE IP Camera

PC DVR

PoE Splitter

PoE Splitter

PoE

PoE

PoE

PoE

DC

DC

SMH884 - FPX

Campus

100Base-TX UTP

100Base-TX UTP with PoE

Power Line (DC)

PoE

DC

APPLICATION

Maximum spectral width of the optical tranceiver 7.7 nm (RMS) Receiver type PINFET Guaranteed sensitivity of the optical receiver Max -28 dBm Optical budget 14 dB Maximum level of the input signal Min -8 dBm Section length 15 km

SFP Plug in Tranceiver Type 2 OI.S1A Connector type LC Transmitter type 1310 nm FPLD Output power -5 to 0 dBm Maximum spectral width of the optical tranceiver 4 nm (RMS) Receiver type PINFET Guaranteed sensitivity of the optical receiver Max -34 dBm Optical budget 29 dB Maximum level of the input signal Min -10 dBm Section length 40 km

Alarm InterfaceInput Activation current 5 mA Maximum current 30 mA Maximum voltage 70 V

Output Maximum current 0.5 A Type Relay Maximum voltage 110 V

PowerDC Power Supply without PoE 48V (40 ~ 72V) with PoE IEEE 802.af, 48V (45 ~ 57V)

Dissipation (PoE not included) up to 12 W

Environment conditionsExtended operation class Temperature - 25º tо +60º C Relative Humidity 5-95% (non condensing) System Configuration1U Metal Case Dimension 440 mm x 257 mm x 43.2 mm (17.32” x 10.11” x 1.70”) Case Weight 3.15 kg

SMH

884

- FPX

Hig

h Pe

rfor

man

ce, 2

0 po

rt, P

oE e

nabl

ed L

2/L3

Ful

ly

M

anag

ed E

ther

net S

witc

h

Page 74: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

74

Compliant with IEEE802 .3, IEEE802 .3u standards

Up to16 10/100 Mbit/s Auto-Negotiation RJ45 ports supporting Auto-MDI/MDX

Up to 8xE1 2048 kbit/s ITU-T G .703 ports with EoE1 media converters, HDCL encapsulation

Port-Based VLAN and IEEE 802 .1Q tag VLAN

MGE41/84/88/168F L2/L3 Managed Ethernet Switch with 16 x FE and 8 x E1 media converters

Man

aged

Eth

erne

t Sw

itch

Ser

ies

Static MAC address and filtering MAC address management

Static Port Priority and IEEE 802 .1p Class of Service (CoS) with 4-level priority queuing

Firmware upgrade, gold configuration backed up and restored

Rack/Desktop - mountable case options

Management through Embedded Web Server (EWS) which can be accessed via WEB browser

GARP VLAN Registration Protocol (GVRP)

Storm control, broadcast and multicast flooding

Per port ingress and egress rate control

STP, RSTP, MSTP

Trunking, Link Aggregation Group (LAG)

Test facilities, Virtual cable tester and PRBS BIST

Internal power supply, -48 Vdc or 220 Vac option

Ac

ce

ss

Sy

ste

ms

8 x E1E1 LEDIP reset16 x Fast EthernetPower LED

8 x Fast Ethernet 8 x E1E1 LEDIP resetPower LED

Page 75: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

75

MG

E41/

84/8

8/16

8F L

2/L3

Man

aged

Eth

erne

t Sw

itch

with

16

x FE

and

8

x E1

med

ia c

onve

rter

s

Description

IRITEL MGExxxF series of High performance Managed Ethernet Switching devices besides of the true Ether-net access, offers versatile combination of user inter-faces integrated together with media converters, thus reducing the need for external media converters.

Application

MGExxxF devices provides edge connectivity utilizing existing E1 and copper infrastructure, applicable in midsized and large scaled campus, corporate and metro access networks, MGExxxF series especially tailored to provide connectivity and LAN extensions between numerus remote sites

Management

Management can be per formed through an embedded Web Server (EWS) by using standard internet browser. The well known WEB interfaces significantly reduce learning time and minimize the cost of deployment.

For the Centralized Network Management we offer embedded SNMPv1//2/3 agent.

Available options

MGE41F4 x Fast Ethernet, electrical interface

1 x E1, 2048 kbit/s G.703 interfaces

MGE84F8 x Fast Ethernet, electrical interface

4 x E1, 2048 kbit/s G.703 interfaces expandable with additional 4 x E1

MGE88F 8 x Fast Ethernet, electrical interface

8 x E1, 2048 kbit/s G.703 interfaces

MGE168F16 x Fast Ethernet, electrical interface

8 x E1, 2048 kbit/s G.703 interfaces

T E C H N I C A L D A T APerformance

Wire speed switching on all Ethernet and E1 ports

Store and forward mode

Non blocking switch fabric

Port speed:

10/100-TX RJ-45

E1 2048 kbit/s RJ-45

Internal power supply

Interface Standards

802.3 10Base-T & 10Base-FL

802.3u 100Base-TX

E1 ITU-T G.703, HDLC encapsulation

General Standards802.1d Bridging

802.3x Backpressure/ Flow Control

Redundancy Standards802.1D Spanning Tree Protocol

802.1W Rapid Spanning Tree

802.1s Multiple Spanning Tree

Link Aggregation, Static port trunk

VLANsIEEE 802.1Q VLAN Tagging

Port-based VLANs

MAC-based VLANs

GARP VLAN Registration Protocol (GVRP)

Management and MonitoringWEB

RFC 1157 SNMPv1/v2c

RFC 2570 SNMPv3

RFC1213 MIB-II

RFC1493 Bridge MIB

RFC 2863 Interfaces group MIB

RFC 1643 Ethernet like MIB

Stats, History, Alarms, Events

RFC 2674 802.1Q MIB

IP address allocation

SecurityManagement Security: user name and password protection

Fault ProtectionBroadcast Storm Control

Ingress egress rate control

Quality of Services (QoS)QoS in layer 2

Traffic prioritization using 802.1p

System ConfigurationW x D x H 440mm x 257mm x 43.2mm

(17.32” x 10.11” x 1.70”)

Weight 3.15kg (6.94lb)

Mounting 19” rack-mountable hardware included

Power supplyInternal – 48 Vdc, or 220 Vac option

Operating temperature range– 5⁰ C up to +45⁰ C, (class 3.2)

Page 76: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

76

Compliant with IEEE802 .3, IEEE802 .3u standards

Up to16 10/100 Mbit/s Auto-Negotiation RJ45 ports supporting Auto-MDI/MDX

Up to 8xE1 2048 kbit/s ITU-T G .703 ports with EoE1 media converters, HDCL encapsulation

Port-Based VLAN and IEEE 802 .1Q tag VLAN

Per E1 port configurable AES128/192/256 encryption module with flexible key and access management

MGE168FS L2/L3 Managed Ethernet Switch with 16 x FE and 8 x E1 media converters with Encryption

Man

aged

Eth

erne

t Sw

itch

Ser

ies

Static MAC address and filtering MAC address management

Static Port Priority and IEEE 802 .1p Class of Service (CoS) with 4-level priority queuing

Firmware upgrade, gold configuration backed up and restored

Rack/Desktop - mountable case options

Management through Embedded Web Server (EWS) which can be accessed via WEB browser

GARP VLAN Registration Protocol (GVRP)

Storm control, broadcast and multicast flooding

Per port ingress and egress rate control

STP, RSTP, MSTP

Trunking, Link Aggregation Group (LAG)

Test facilities, Virtual cable tester and PRBS BIST

Internal power supply, -48 Vdc or 220 Vac option

Ac

ce

ss

Sy

ste

ms

8 x E1E1 LEDIP reset16 x Fast EthernetPower LED

Page 77: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

77

MG

E168

FS L

2/L3

Man

aged

Eth

erne

t Sw

itch

with

8 x

FE

and

4 x

E1

med

ia c

onve

rter

s with

Enc

rypt

ion

Description

IRITEL MGE168FS high performance Managed Ethernet Switching device besides of the true Ethernet access offers versatile combination of user interfaces integrated together with media converters with encryption, thus reducing the need for external media converters.

Encryption Standard (AES) provides high confidence level of data security over public telecommunication network. Each E1 link at the device is possible to configure to perform data encryption with different key length, key management and key schedule. Encryption procedure includes key exchange, authentication and user data encryption. Each phase of encryption procedure uses their own key.

ApplicationMGE168FS provides edge connectivity utilizing existing E1 and copper infrastructure, applicable in midsized and large scaled campus, corporate and metro access networks. MGE168FS is especially tailored to provide connectivity and LAN extensions between numerus remote sites with encryption.

Management

Management can be per formed through an embedded Web Server (EWS) by using standard internet browser. The well known WEB interfaces significantly reduce learning time and minimize the cost of deployment.

For the Centralized Network Management we offer embedded SNMPv1//2/3 agent.

T E C H N I C A L D A T APerformanceWire speed switching on all Ethernet and E1 ports

Store and forward mode

Non blocking switch fabric

Port speed:

10/100-TX RJ-45

E1 2048 kbit/s RJ-45

Internal power supply

Interface Standards802.3 10Base-T & 10Base-FL

802.3u 100Base-TX

E1 ITU-T G.703, HDLC encapsulation

General Standards802.1d Bridging

802.3x Backpressure/ Flow Control

AES: NIST FIPS197

Redundancy Standards802.1D Spanning Tree Protocol

802.1W Rapid Spanning Tree

802.1s Multiple Spanning Tree

Link Aggregation, Static port trunk

VLANsIEEE 802.1Q VLAN Tagging

Port-based VLANs

MAC-based VLANs

GARP VLAN Registration Protocol (GVRP)

Management and MonitoringWEB

RFC 1157 SNMPv1/v2c

RFC 2570 SNMPv3

RFC1213 MIB-II

RFC1493 Bridge MIB

RFC 2863 Interfaces group MIB

RFC 1643 Ethernet like MIB

Stats, History, Alarms, Events

RFC 2674 802.1Q MIB

IP address allocation

SecurityManagement Security: user name and password protection

Fault ProtectionBroadcast Storm Control

Ingress egress rate control

Quality of Services (QoS)QoS in layer 2

Traffic prioritization using 802.1p

System ConfigurationW x D x H 440mm x 257mm x 43.2mm

(17.32” x 10.11” x 1.70”)

Weight 3.15kg (6.94lb)

Mounting 19” rack-mountable hardware included

Power supplyInternal – 48 Vdc, or 220 Vac option

Operating temperature range– 5⁰ C up to +45⁰ C, (class 3.2)

Page 78: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

78

Up to 4 10/100/1000 Mbit/s Auto-Negotiation RJ45 ports supporting Auto-MDI/MDX, 1 G SFP optional

Up to 16 10/100 Mbit/s Auto-Negotiation RJ45 ports supporting Auto-MDI/MDX

Up to 8xE1 2048 kbit/s ITU-T G .703 ports with EoE1 media converters, HDCL encapsulation

Stacked devices are fully manageable and behaves as a single device

MGE88/168G Stackable Gigabit L2/L3 Managed Ethernet Switch with 16xFE, 4xGE and 8xE1 media converters

Man

aged

Eth

erne

t Sw

itch

Ser

ies

Port-Based VLAN and IEEE 802 .1Q tag VLAN

Static MAC address and filtering MAC address management

Static Port Priority and IEEE 802 .1p Class of Service (CoS) with 4-level priority queuing

Firmware upgrade, gold configuration backed up and restored

Rack/Desktop - mountable case options

Internal power supply, -48 Vdc or 220 Vac option

Ac

ce

ss

Sy

ste

ms

8 x E1

E1 LED

IP reset16 x Fast EthernetPower LED

4 x 1G Ethernet

Page 79: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

79

MG

E88/

168G

Sta

ckab

le G

igab

it L2

/L3

Man

aged

Eth

erne

t Sw

itch

with

16

xFE,

4xG

E an

d 8x

E1 m

edia

conv

erte

rs

Description

IRITEL MGExxxG series of High performance Man-aged Ethernet Switching devices besides of the true Ethernet access MGExxxG offers versatile combination of user interfaces integrated together with media converters thus reducing the need for external media converters. Stacked switches behaves as larger switch managed as a single device.

Application

MGExxxF devices provides edge connectivity utiliz-ing existing E1 and copper infrastructure, applicable in midsized and large scaled campus, corporate and metro access networks, MGxxxG is especially tailored to provide connectivity and LAN extensions between numerus remote sites. MGxxxG devices are scalable and they are ideal for extending port count in order to fulfil network growing requirements.

Management

Management can be performed through an embed-ded Web Server (EWS) by using standard internet browser. The well known WEB interfaces significantly reduce learning time and minimize the cost of de-ployment.

For the Centralized Network Management we offer embedded SNMPv1//2/3 agent.

Available options

MGE88G8 x Fast Ethernet, electrical interface

8 x E1, 2048 kbit/s G.703 interfaces

2 x 1G Electrical interfaces

2 x 1G Optical (SFP) interfaces

MGE168G16 x Fast Ethernet, electrical interface

8 x E1, 2048 kbit/s G.703 interfaces

2 x 1G Electrical interfaces

2 x 1G Optical (SFP) interfaces

T E C H N I C A L D A T APerformanceWire speed switching on all Ethernet and E1 ports

Store and forward mode

Non blocking switch fabric

Port speed:

10/100-TX RJ-45

E1 2048 kbit/s RJ-45

Internal power supply

Interface Standards802.3 10Base-T & 10Base-FL

802.3u 100Base-TX

E1 ITU-T G.703, HDLC encapsulation

General Standards802.1d Bridging

802.3x Backpressure/ Flow Control

Redundancy Standards802.1D Spanning Tree Protocol

802.1W Rapid Spanning Tree

802.1s Multiple Spanning Tree

Link Aggregation, Static port trunk

VLANsIEEE 802.1Q VLAN Tagging

Port-based VLANs

MAC-based VLANs

GARP VLAN Registration Protocol (GVRP)

Management and MonitoringWEB

RFC 1157 SNMPv1/v2c

RFC 2570 SNMPv3

RFC1213 MIB-II

RFC1493 Bridge MIB

RFC 2863 Interfaces group MIB

RFC 1643 Ethernet like MIB

Stats, History, Alarms, Events

RFC 2674 802.1Q MIB

IP address allocation

SecurityManagement Security: user name and password protection

Fault ProtectionBroadcast Storm Control

Ingress egress rate control

Quality of Services (QoS)QoS in layer 2

Traffic prioritization using 802.1p

System ConfigurationW x D x H 440mm x 257mm x 43.2mm

(17.32” x 10.11” x 1.70”)

Weight 3.15kg (6.94lb)

Mounting 19” rack-mountable hardware included

Power supplyInternal – 48 Vdc, or 220 Vac option

Operating temperature range– 5⁰ C up to +45⁰ C, (class 3.2)

Page 80: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

80

Continuous hierarchical management of complex networks, subnetworks, stations, and devices

Service and network monitoring

Operation and maintenance tool, essential for network design

Enables evolutionary network management redesign

OSS/BSS system integration

SUNCE+ Network Management System

Ne

two

rk M

an

ag

em

en

t S

ys

tem

SUNCE+

SUNCE-M SUNCE-M SUNCE-M

Page 81: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

81

SU

NCE

+ N

etw

ork

Man

agem

ent S

yste

m

Applications

Enables integration of all IRITEL transmission systems

Integration of all elements in network or their subset

Network topology is presented in hierarchical tree view, from a sub-network layer to a single location and elements in it

Fast identification of network resource problems improves quality of service

Client-server architecture enables multi-user access

Distributed hardware platform

Operations on IRITEL OTN, SDH and PDH network elements

Distributed hardware platform, depending on number and complexity of managed systems

Automatic database failover

Web browser for application access, over LAN or VPN

FCAPS management functions (Fault, Configuration, Accounting, Performance, Security)

Monitoring of current network state and its history

Monitoring user actions in SUNCE+

Base Module

Enables database integration, access using Web browser and system administration. Other functions are supported in separate modules.

Module Alarms

Presents filtered set of current alarms on hierarchical levels

Monitoring of predefined set of alarms

Reports of any subset of alarms are generated from history log

Module Remote Access

Remote access to SUNCE-M system, with local operator rights

View or change network element parameters and trail management in network

Integration

Integration with OSS/BSS system (Northbound interface)

Direct access to new device types through Southbound interface

Open management interfaces: SNMP, XML...

Module OTN

Network management system for IRITEL OTN devices

Module Inventory

Collecting service data from network elements

Device reports and statistics (unit types, hardware and software versions...)

Module Performance

Provides service availability information on selected customer

Presents information on point to point free transport capacity

Module Accounting

Provides services remuneration through access to accounting data

ITU-T Recommendations

M series: M.3010, M.3300, M.3400

SUNCE+

System Integrator

client

client

client

client

OLM

FM2x2

SUNCE-M

ODS622

ODS622

ODS622

OLM

SUNCE-M

FM-MSAN

ODS2G5

ODS2G5

ODS2G5OT P10 G

OT P10 G

OT P10 G

client

client

Page 82: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

82

Management system covering the full range of IRITEL SDH and PDH equipment

Easy to use – from network views to functional blocks on a single board

Trail manager featuring automatic route calculation

SUNCE-M Integrated Network Management System

Ne

two

rk M

an

ag

em

en

t S

ys

tem

Page 83: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

TCP/IP

ODS2G5

ODS2G5

ODS2G5

OTSM

ODS622

PSH

FM-MSAN

PSH

LTH-E1KGXV

OTS622

FM2x2

OTSM

ODS2G5

STM-16

Multiservice Access Node

SDH Optical Ring

SUNCE-M

LTH-E1

KGET/8

LAN

V5.2IAM-MSAN

FM-MSAN

LAN

83

Management system covering the full range of IRITEL SDH and PDH equipment

Easy to use – from network views to functional blocks on a single board

Trail manager featuring automatic route calculation

Basic Functions

Integrated solution for continuous centralized monitoring of the entire network and individual network element

Intuitive Graphical User Interface facilitates a range of operations, from network view and containment tree view, to functional blocks on a single board

Enables TMN ( Telecommunications Network Management) management functions – fault, configuration, per formance and security management

Provides functions of Network Management Layer and Element Management Layer of the TMN functional architecture

The computer in Management Operations Center is connected to one network element using Ethernet or RS232 serial interface (F interface)

Provides integration in Network Management System SUNCE+

Network Elements

Each network element is equipped with System Management Unit that exchanges information with SUNCE-M. Supported products in Network Management System:

SDH (STM-16/4/1) Optical Digital Systems: ODS2G5, ODS622/ODS622C, OTS622, ODS155

Access Systems: FM-MSAN, IP µDSLAM, IAM-MSAN, V5CAS and FM2x2

DSL modems: PSH (SHDSL) and LTH-E1 (HDSL)

Optical Terminal and Secondary Multiplexer OTSM 4x2Mbit/s

Interface Convertors: KGXV, 2 Mbit/s G.703 to X.21/V.35 and KGET, KGET8, 2 Mbit/s G.703 to Ethernet

SU

NCE

-M

Inte

grat

ed N

etw

ork

Man

agem

ent S

yste

m

Page 84: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

84

Fault Management

Alarm reports from each of the network elements are received automatically and displayed as visual and textual information

Alarms classification: Communication alarms

(transmission and synchronization)

Performance alarms

Equipment alarms

Alarm summar y is avai lable on var ious layers - from network element to equipment functional blocks

Assign alarm severity Acknowledge active alarms Testing:

Close local and remote loops on various levels

Configure PMP (Protected Monitoring Point)

Use built-in PRBS generators and detectors

Fault event history for the entire network is stored in database, with filtering options for any set of network elements categorized by type of network element, time, classification, severity, acknowledgement and status of the event

Configuration Management

Create and change network topology using visual network editor

Create and delete network elements

Connect elements using optical and electrical links

Elements can be grouped upon their location

Edit network element properties

Network parameters

Module equipping

Synchronization parameters

Cross-connections

Quick configuration using configuration files

Trail manager with complete trail lifecycle management: Simple point and click to create, change and

delete trails

Automatic calculation of possible trail routes between network elements

Visual presentation of existing trails in network topology view

Inventory management capabilities include: Tributaries - configuration and services

Network status

Serial numbers, hardware and software versions

SU

NCE

-M

Inte

grat

ed N

etw

ork

Man

agem

ent S

yste

m

Page 85: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

85

T E C H N I C A L D A T A

System requirementsOperating System Windows 8 Windows 7 Windows Vista Windows XP

RAM 2 GB (4 GB recommended)

Free Hard disk capacity > 1 GB

ITU-T Recommendations G series G.781, G.783, G.784, G.826, G.841M series M.3010, M.3300, M.3400

Performance Management

Analyze and aggregate network performance data on a per network element basis

Collect performance events grouped in 15 minutes and 24 hours intervals according to ITU-T G.826

ES – Errored Seconds

SES – Severely Errored Seconds

BBE – Background Block Error

UAS – UnAvailable Seconds

Adjust performance alarms thresholds

Examine UAT (UnAvailable Time) intervals

Security Management

User-based security model

Role based user access control

User data editing (add, delete, change)

Review of user actions log with filtering

SU

NCE

-M

Inte

grat

ed N

etw

ork

Man

agem

ent S

yste

m

Page 86: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FXO

IRINET

IRISIPNET

PSTN

INTERNET Router

Proxy,Firewall

PBXSIP 1

Gateway

SIP 2

PDAPC 1 PC 2

PC n

PC n+1

PC m

ippbx

SIPDAT

IRIS

86

IVR (Interactive Voice Response)

PC in local network

SIPDAT “speaks” your data

Great capacity of concurrent calls (default 8, up to 64)

SIPDAT is accessible through PSTN and Internet

Easily changeable voice messages

Easy programming

Remote access

Tailored to customer needs

SIPDAT SIP Interactive Voice Response Device

Vo

IP D

ev

ice

s

LET YOUR DATA SPEAK !

Page 87: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

FXO

IRINET

IRISIPNET

PSTN

INTERNET Router

Proxy,Firewall

PBXSIP 1

Gateway

SIP 2

PDAPC 1 PC 2

PC n

PC n+1

PC m

ippbx

SIPDAT

IRIS

Voice

Data 87

SIP

DAT

SIP

Inte

ract

ive

Voic

e Re

spon

se D

evic

e

Using SIPDAT

Automatic reading of storehouse data over phone

Public information on changeable data (temperature, exact time, number of cars on the road section, ...)

Private data with authorisation (credit card balance, personal documents, ...)

Hosting

SIPDAT Customers

Telecommunication providers Government institutions and agencies Power plant companies Banks and other financial institutions Trade organizations Any company which needs:

Fast and cheap access to important data,

Surveillance of automated processes,

Control of unattended objects

Basic features

Voice messages:

Easy recording – wav format Correct pronunciation of data

(grammar) Us e r c a n r e co r d h is ow n

messagesCommunication:

SIP RFC 3261 SDP RFC 4566 Other references: RFC 2617, RFC

2976, RFC 3262, RFC 3263, RFC 3966,….

Families of codecs (G.711, Speex, GSM, L16) Various improvements:

Voice Activity Detector (VAD) Comfort Noise Generator (CNG) Perceptual Enhancement (PENH) Packet Lost Concealment (PLC) Echo cancelation

SIPDAT can be reached from public and mobile telephone networks

Conference Recording and playing of speech RTP and RTCP Security – SRTP and SRTCP Tone generation

Data base access

Oracle data base client MySQL data base client Remote data base access Remote SQL query formatting

Remote SIPDAT configuration

Web server Web browser access Configuration data:

Recording and playing of messages SQL query input Administration

Supervision

SIPDAT test configuration in IRITEL

If you want to test SIPDAT in test configuration in IRITEL please contact: Ivan Vidaković

Phone: 381 11 3073 412 Mob: 381 65 3073 412

Mail: [email protected] sip: [email protected] [email protected]

SIPDAT in IRITEL

Oracle client – connected with IRIS (information system)

SIP client connected with ippbx (SIP server)

Accessible from IRINET (LAN), Internet, PSTN and PLMN

Reading of any data from IRIS, for instance:

Number of a certain component in storehouse

Number of employees in the company at the moment

Page 88: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

IMG

R

R

R

R

R

POTS

ISDN

n x E1

n x E1TDM (E

1/CAS)

TDM (H.110)

Access Multiplexer

TDM

H.248/SIP

H.248/SIP

RTP/RTCP

CORE

SoftSwitch

Media Gateway

TDM Switch

TDM Switch

RouterRouter

Router

Router

Router

IPRTP/RTCP

88

VoIP – TDM to IP telephony switch

Up to 200 simultaneous VoIP-POTS conversions for 2400 subscribers

Stand-alone device or part of Access Multiplexer

Signalization: SIP or MEGACO (H .248)

Network management system SUNCE-M or SNMP-based management

IMG Media Gateway

Vo

IP D

ev

ice

s

Page 89: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

89

IMG

M

edia

Gat

eway

Implementation

IMG connects POTS subscribers with IP network by transforming classic telephone traffic to VoIP and vice versa

IMG can be realized as a stand-alone device or as a unit of Integrated access multiplexer Access Multiplexer

Access Multiplexer enables different subscribers (POTS, ISDN, xDSL, Ethernet, X.21, V.35...) to access PSTN and IP networks

Configuration

IMG consists of Engines – software units that can be executed on different hardware platforms and are connected by UDP/TC/IP protocols. This organisation enables big flexibility and skalability.

IMG contains:

ME (Media Engine): is working on voice coding/encoding

SE (Signalization Engine): is dealing with signalization

AE (Application Engine): controls software applications and functions

TE (TDM Engine): is dealing with POTS

When IMG is a part of Access Multiplexer it cantains ME, SE and AE, and TE functions are performed by Access Multiplexer

T E C H N I C A L D A T AVoice packetisation

Voice coders/encoders

G .711 Appendix 1 and 2: Linear PCM 64 kbit/s A law/μ law, VAD/CNG, and PLC

G .723 .1: MP-MLQ 6.3 kbit/s / ACELP 5.3 kbit/sG .726: ADPCM 16, 24, 32, 40 kbit/sG .729 A/B: CS-ACELP 8 kbit/sGSM-AMR: 4.75-12.2 kbit/sT .38 Fax Relay: G3 Fax Relay 2.4-14.4 kbit/sSMV: 0.8-8.55 kbit/s EVRC: 0.8-8.55 kbit/s

Voice processing, quality enhancements

Echo cancelation: per ITU-T G.168-2000 ECAN 10 ms, 16 ms, 32 ms, 128 ms tail sparse window

Voice detection: analyzes voice activity to detect silence intervals

Packet Loss Concealment: per ITU-T G.711 Appendix 1Comfort Noise Generation: per ITU-T G.711 Appen-

dix 2Adaptive Jitter Buffer Manager: fully adaptive or

static; de-jitter and packet reorderingAudio Conferencing: support for 3 to N party audio

conferences per DSP corePrompts: playback of prompts from local memory

Telephony Algorithms

DTMF Detect and Generate: per Bellcore GR-506-CORE, TIA 464-B, ITU-T Q.23 and Q.24

DTMF Relay: per RFC 2833

Call Progress Tone Handling: per Bellcore GR-506-CORE, ITU-T Q.35

Caller Identification: per ETSI, NTT and Telcordia algorithms

DSP data transfer

RTP/RTCP: per RFC 1889 and 3550UDP: per RFC 768IP: per RFC 791

Signalization

SIP: per RFC 3261SDP: per RFC 2327MEGACO: per RFC 3525 – option

Capacity

IMG can handle up to max. 200 simultaneous VoIP connections

TDM H .110 bus capacity (IAM-MSAN) is 2400 subscribers

IMG has: 2 x 10/100 BaseTx interfacesIAM-MSAN supports up to 6 IMG Media Gateway

Software

Operating system: eLinux (Freescale)Applications: written in C

Hardware

Processor Power PC II MSC8260VoIP cores 1 to 2 x DSP MSC8122Aggregator: DSP MSC 8103SDRAM 64 MB, FLASH 64 MBDigital Switch: MT90866Ethernet Switch: ZL50405

Page 90: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

S T V

IT

IP/MPLS

NT P S E R V E R

S B CIMT

S IP

MG W

S IP

S IP/R TP

PS TN

S S 7

R TPLN

NU (O&M)

IMG 95

IMG 95

S IP/R TP

TCP/IP

TCP/ IP

switch

switch

FEGEOpticalZ

Interfaces:

ROUTER

ROUTER

90

First VoIP device belonging to a family of IMG devices developed by IRITEL for use in NGN (Next Generation Network)

Used to support service 95 (exact time speaking service) in Telekom Srbija

Contemporary IVR (Integrated Voice Response) system with adequate number of voice channels (VoIP channels to IVR channels ratio is 1:1)

Connected to NGN via SIP protocol

Media transfer is performed using RTP/RTCP protocol

Exact time is established using NTP protocol

IMG95 VoIP IVR

Vo

IP D

ev

ice

s

Page 91: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

91

IMG

Med

ia G

atew

ay

Configuration

Exact time speaking function is supplied by Exact Time System – STV which consists of two IMG95 devices and two switches connected in order to increase the reliability of a system.

STV is working in active/stand-by mode and fulfils the “no single point of failure” criteria.

STV is maintained by computer NU from IT network.

IMG95 contains printed boards:

IMG – basic board with embedded Linux

PFC – DSP processors for voice packing

VMU – voice machine unit

Operation and maintenance

Operation and maintenance is performed by computer NU from IT network.

NU functions are:

Statistics – data on number of calls, duration, etc. is gathered every 15 minutes

Alarms – heavy, medium and light alarms are gathered and displayed

Archives – all gathered data are archived in daily reviews (15 min. statistics, from-until statistics, alarms)

Web – IMG95 devices have their own web pages with configuration data

Docs – help documentation

NU transfers data to higher level of hierarchy by ftp protocol or writes them in database using SQL language

Basic references and standards

SIP/SDP:

RFC 3261 - SIP: Session Initiation ProtocolRFC 2327/4566 - SDP: Session Description ProtocolRFC 2617 - HTTP Authentication: Basic and Digest Access AuthenticationRFC 3310 - Hypertext Transfer Protocol (HTTP) Digest Authentication Using Authentication and Key Agreement (AKA)

Media flow

RFC 3550 - A Transport Protocol for Real-Time ApplicationsRFC 2833 - Telephony SignalsRFC 3605 - Real Time Control Protocol (RTCP) attribute in Session Description Protocol (SDP)

Codec’s:

G .711 App . 1 & 2 - Linear PCM 64 kbps A Law/μ Law, VAD/CNG, and PLCG .729 A/B - CS-ACELP 8 kbpsITU-T G .168-2000 - Echo cancelation -ECAN 10 ms, 16 ms, 32 ms, 128 ms window

Other:

RFC 791 - Internet protocolRFC 768 - User Datagram ProtocolRFC 1305 - Network Time Protocol: Specification, Implementation and Analysis

T E C H N I C A L D A T ATraffic 86 Erl (up to 147 Erl)

Number of VoIP channels 120 (up to 200)

BHCA - Busy Hour Call Attempts around 10.000 (17.000)

Connection to IP/MPLS network 4 x 100 BaseTx Fast Ethernet IEEE 802.3μ

Codec’s G.711, G.729

VQE – Voice Quality Enhancements EC, VAD, PLC, CNG,AJBM

Power supply internal converter 220 V~ to 48V=

Dimensions rack 19’’ wide, 1 U high, 300 mm deep

Weight around 2 kg

IP/MPLS network connections:

ETH – IT network connection (maintenance, ntp)

SIGN – SIP signalization

DATA – RTP/RTCP media transfer

VMU – voice machine unit control

VQE techniques are:

EC – echo cancelation VAD – voice activity detection PLC – packet loss concealment CNG – comfort noise generation AJBM – adaptive jitter buffer manager

Page 92: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

92

High quality jamming equipment for mobile communications

Blocking up to three frequency bands simultaneously GSM 900, GSM 1800 and UMTS

Various applications

Compact and modular design

CJ-1P Cellular Jammer

Ra

dio

Co

mm

un

ica

tio

ns

Page 93: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

93

CJ-

1P C

ellu

lar J

amm

er

Description

CJ-1P is a high quality jamming equipment for mobile communications. The CJ-1P cell phone jammer unit is intended for blocking all mobile phone types within designated indoor or outdoor areas. Its unique design combines effective jamming and strict compliance with international standards of safety and electromagnetic compatibility.

CJ-1P is a ‘plug and play’ unit, its installation is quick and its operation is easy. Once the CJ-1P cellular jammer is operating, all mobile phones present within the jamming coverage area are blocked, and cellular activity in the immediate surroundings (including incoming and outgoing calls, SMS, pictures sending, etc.) is jammed.

Basic features

Fully digitalized

Effective jamming in a radius between 5-100 meters (depending on cellular signal strength at site)

Can block up to three frequency bands simultaneously GSM 900, GSM 1800 and UMTS

Remote controlled

Blocking range selection

Can be operated via 12 Vdc power source

Applications

Prevention of eavesdropping and information transfer:

Briefing rooms Military and governmental offices Interrogation rooms

Prisons Conference rooms Embassies Government facilities Financial institutions Sensitive locations, churches, faculties

Acoustic isolation:

Theatres / cinemas Concert halls Lecture rooms / libraries Exclusive restaurants Trains Gaming facilities Sensitive locations

Secret services

Government agencies

Police Negotiation Team

Military facilities and forces

Police Special Forces

VIP protection agencies

Elite units

T E C H N I C A L D A T AFrequency ranges: GSM 900 925 - 960 MHz GSM 1800 1805 - 1880 MHz UMTS 1920 - 2170 MHzSynthesizer type digitalJamming signal type white noise with uniform distributionOutput power ON/OFF possibility and adjustable 0 - 30 dB for every band independentlyResolution output power 1 dB

Antenna system three PCB antennas Frequency ranges: АNTENNA1 925 - 960 MHz АNTENNA1 1805 - 1880 MHz АNTENNA3 1920 - 2170 MHz Impedance 50 Ω unbalanced Radiation (H-plane), beamwidth at -3 dB 70° at 920; 60° at 1920 MHz Radiation (E-plane), beamwidth at -3 dB 70° at 920; 60° at 1920 MHz Radiation angle 0° Front to back ratio ≥ 15 dB from 880 to 960 MHz ≥ 15 dB from 1710 to 2000 MHz ≥ 10 dB from 2000 to 2170 MHz Polarization vertical Gain 9 dBi S.W.R. in bandwidth ≤ 2.0:1 from 880 to 960 MHz ≤ 1.8:1 from 1710 to 2170 MHz Max. power 2 Watts (CW) at 50° C Connector SMA-male Material FR4 substratum the depth of 1.6 ± 10 % Cu + Sn plateDimensions АNTENNA1 148.3 x 127 x 45 mm ANTENNA2 148.3 x 127 x 30 mm АNTENNA3 120.5 x 75.5 x 20 mm JAMMER UNIT 300 x 265 x 80 mm BRIEFCASE 500 x 400 x 130 mmPower supply 12 Vdc/battery 12 Ah Consumption 30 VAOperated temperature range -40°C to + 85°C

Page 94: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

94

8 antenna inputs and 16 receiver outputs

Frequency range 20 – 3000 MHz

Solid state switching matrix

Seamless Integration

Local and remote control (Ethernet) as RoIP element

Modular structure

Compact and modular design

ARK3000 Antenna Distribution System

Ra

dio

Co

mm

un

ica

tio

ns

Page 95: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

95

ARK

3000

Ant

enna

Dis

trib

utio

n Sy

stem

Description

Antenna Distribution System ARK3000 receives signals from the eight antennas in the frequency range from 20 MHz to 3 GHz and distributes / switches received signal to the sixteen receivers whereby any of RF outputs can be assign any antenna, or pre-defined combination of antennas.

General characteristics

Control

Local via front panel (touchscreen) Remote via Ethernet link, using any Internet

browser via the intuitive user interface Easy integration into automated systems for

monitoring radio spectrum and radio-surveillance

Working in an autonomous / manual mode

Options

Digitally controlled attenuators on inputs

DC power supply 12 V/24 V/48 V

Different types of input connectors

Different types of input filters

Control via RS232 or USB interface

Adaptation of protocols and structure of management posts in order to emulate the existing antenna distributor

T E C H N I C A L D A T AAntenna InputsNumber of inputs 8

Frequency subband input

VHF1: 20 – 88 MHz 2 inputsVHF2: 110 – 180 MHz 2 inputsVHF/UHF1: 225 – 470 MHz 2 inputsUHF1: 100 – 1400 MHz 1 inputUHF2: 500 – 3000 MHz 1 input

Input impedance 50 Ω

Input SWR ≤ 3

Maximum input level + 17 dBm

Attenuation of input to output

VHF1 ≥ 60 dBVHF2 ≥ 50 dBVHF/UHF1 ≥ 50 dBUHF1 ≥ 50 dBUHF2 ≥ 50 dB

RF outputsNumber of RF outputs 16

Output impedance 50 Ω

Output SWR ≤ 1.5

1dB compresion point > +10 dBm

Attenuation between any two outputs

VHF1 ≥ 50 dBVHF2 ≥ 45 dBVHF/UHF1 ≥ 45 dBUHF1 ≥ 45 dBUHF2 ≥ 40 dB

IP2 (the second order intercept) min 35 dB

Type of connectors (input/output) N

Gain min 1 dB

Noise ratio ≤ 5 dB

Interface for remote control Ethernet 10/100 Mbit/s

Power 220V ±10 %, 50 Hz

Consumption 50 VA

Dimensions 480 x 133 x 365 mm

Weight 15 kg

Operating temperature range -5 do +45 °C

Control over Internet

Page 96: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

96

Simultaneous monitoring and control of power electronics from different vendors, technologies and generation

Modular system for monitoring and control of power electronic devices in remote locations:

Peripheral device for monitoring and control - DNU24

Monitoring and control center (local)

Main monitoring operations center

Peripheral device for monitoring and control - DNU24: Continuous measures of electrical and non-electric

values in the remote objects and data forwarding to the monitoring center at its request

SDNU System for Remote Monitoring & Control of Power Electronic Devices

Po

we

r E

lec

tro

nic

s

Measured electric and non-electrical values can be wireless send to DNU24

Monitoring of alarms and in the case of their appearance forwarding to the monitoring center

Control signals from the monitoring center are forwarded to power electronic devices which is possible to control

Communication between monitoring and control center and DNU24 through TDM, IP and GSM telecommunication network

Communication between monitoring and control center (local)and main monitoring operations center through SNMP

Remote control of batteries quality with and without additional load

Page 97: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

97

SD

NU

Sys

tem

for R

emot

e M

onito

ring

& C

ontr

ol o

f

P

ower

Ele

ctro

nic

Dev

ices

System Description

Monitoring and control system, for power electron-ics devices at remote locations, contains different number of DNU24 devices. Each device collecting and transmitting data to monitoring and control center.

DNU24 is connected with monitoring and control center over TDM (modem, ISDN), IP (Ethernet 10/100 baseTx) or GSM (GPRS) telecommunication network. Type of connection is defined by user in accordance with technical availability.

DNU24

Capacity of DNU24 are 16 analogue and 8 digital signals

Measurement and sending data related to electri-cal values: dc voltage, ac voltage, dc current

Capturing, and sending to the monitoring and control center, signal wave shapes with 1 ms resolution

Capturing, and sending data related to incident situations: measuring values 250 sec after and before incident happened

Measurement and transmission of different values - temperature, pressure, liquid level and other non electrical values

Data are collected and memorized in internal memory of DNU24 every 1 s

Monitoring and control center collects data from DNU24 every 15 minutes

Digital alarm signals, generated from devices under monitoring, DNU24 send to monitoring and control center immediately after their detection

DNU24 have capacity of control over 4 output digital signals and over RS232 interface

In case the power electronic devices have own ability for their remote control, DNU24 send their collected data to the monitoring and control center

Battery capacitive test

Optionally connecting of batteries to additionally test load

Recording batteries current discharge curves

Comparison with manufacturer catalogue discharge curve

Estimation of batteries quality

Monitoring & Control Center (local)

Main MonitoringOperations Center

IPnetwork

IPnetwork

TDMnetwork

GSMnetwork

Analog signalsDigital signals

Analog signalsDigital signals

Analog signalsDigital signals

RS232

RS232

RS232

DNU24

DNU24

DNU24

Batteries

Rectier

SNN12

Battery capacity test

Page 98: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

98

SDN

U S

yste

m fo

r Rem

ote

Mon

itori

ng &

Con

trol

of

Pow

er E

lect

roni

c D

evic

esMonitoring and Control Center

PC with installed necessary software are located in center for remote monitoring and control. Measured data from DNU24 are periodically collecting. Data is stored in the particular database.

In the monitoring center, all data are presented in a clear manner so that the operator have a clear picture about the current state of the system. It is possible to generate a report with the results of measurements over a defined period of time.

The structure of the system for remote monito-ring and control

The structure of device that is monitored and controlled for each object

The measured values of all parameters

The on/off values on remote devices that are controlled

The data required for system administration

Statistical dataAll data are presented in tabular and graphical way.

Measurement ranges can be changed from the monitoring and control center.

Alarms are present in the monitoring and control center until the authorized person terminate them or until they disappear because the cause is disappeared. No matter how alarms go away, the date and time of an alarm condition are registered and the moment and the reason when the are gone. Low battery alarm is combined with an estimation of how much time the object will have to work on battery.

Monitoring and control center and main monitor-ing operations center allow statistical analysis of all collected data and generating of reports on all the alarms and the measured values deviations from the nominal value.

Information stored in the database can be trans-ferred to a standard format database (Access, SQL,

Oracle, ...) for further processing and eventual integra-tion into other systems for monitoring users.

Control of power electronics devices are available in two ways: through the digital control signals directly from DNU24 and through a defined communication protocol (given from manufacturer of the device which is under control in the object); in that case, com-munication flows through special ports of DNU24). Commands are given from the center for monitoring and control (sent to DNU24). When the command is executed by a digital signal from DNU24, it is realized as a time switch (time-limited duration with the pos-sibility of interruption).

Monitoring and Control Network

Centers for monitoring and control can be connected in a hierarchical network for monitoring and control via an IP network to communicate with the main center.

Protocol for communication with the main moni-toring operations center is standardized (SNMP).

Safety Procedures

Authorization of access by user name and password

Assigning user accounts that have limit access to options in the system

Administration of system user - adding, deleting and changing data

Over viewing of the user history (log files, filte-ring)

Page 99: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Constructed and tested according to

Safety EN 60950 (UL1950)

EMC EN 55022/CISPR22, class A

Environmental conditions

Working temperature 0 to +50°C

Dimensions (W x D x H) 440 x 210x 55 mm

Weight 3 kg

99

SDN

U S

yste

m fo

r Rem

ote

Mon

itori

ng &

Con

trol

of

Po

wer

Ele

ctro

nic

Dev

ices

T E C H N I C A L D A T ADNU24:

Analog measurement

DC voltage (0 - 1000 V) 5 inputs

AC voltage (0 - 300 Veff) 6 inputs

DC currents (-1000 - 1000 A)

or AC currents (0 - 1000 A) 3 inputs

Temperature 2 inputs

Digital inputs

Alarms (galvanic isolation) 4 inputs

Digital outputs control signals

Opticaly isolated 2 outputs

Realised with relays 2 outputs

Monitoring and Control center:

PC computer with Windows XP Professional

Software

GUI software for monitoring and control center

Software for control of AC voltage wave shapes

Communication software

Software for control

Administration software

Statistical data analysis software

Database software

Software for connecting with main center for monitoring and control

Interfaces

Local communication with other equipment RS232, RS485

Communication with control and monitoring center ISDN, Ethernet, GPRS

Page 100: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

100

Compact modular power supply system: SN12 - one shelve (3 rectifiers modules), power 1200 W

SNN12 - two shelves (6 rectifiers modules), power 2400 W

Full front access design – ease of installation and operation

Parallel working of rectifiers – active current sharing, true redundant configuration (N+1)

Natural convection cooling – no fans

Power factor 0 .98 (IEC 1000-3-2)

Two independent battery breaker, up to six load breakers

Optimal Charging of Batteries

Programmable low voltage disconnect (LVD)

Integrated control and monitoring system, SUNCE-M

SNN12 Power Supply System 54 Vdc / 3 x 7.5 A

Po

we

r E

lec

tro

nic

s

Page 101: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

AC

D

IM400

IM400

IM400

DC

D6

BB

BCU/SCU

AC

D

IM400

IM400

IM400

Q bus

RS232

1

6

Loads

Batteries

230 Vac

230 Vac

54.6 Vdc

SNN12 Block diagram

Mainconfiguration

101

SN

N12

Po

wer

Sup

ply

Syst

em 5

4 Vd

c / 3

x 7

,5 A

Description

SNN12 system is power solution designed for telecom, datacom and network applications (48 Vdc nominal) which need to have reliable and permanent DC power supply regardless on main supply failure.

The main parts of SNN12 system are: cabinet, up to two shelves (main and for expansion), and batteries (working and reserve). SNN12 is modular and config-urable for different load power: 400, 800 and 1200 W (SN12- main shelf, up to 3 rectifiers units) or 1600, 2000 and 2400 W (two shelves, up to 6 rectifiers units) or 2 ETSI shelves (up to 6 rectifiers). In redundant configu-ration off power supply system (N+1), reserve rectifier is in parallel work with others rectifiers. Accuracy of rectifiers active current sharing is 5%.

Batteries are paralleled with load and system out-put. Battery management includes controlled current charging of batteries independent of load current, IU characteristic, automatic temperature compensation with additional cable and sensor and programmable low voltage disconnect.

System overview

SNN12 system is composed of:

Up to two AC distribution (ACD)

Up to 6 rectifier modules (IM400), power of each rectifier 400 W (nominal)

Load (DC) distribution (DCD2/6) with two or six output fuses (terminals ended with connectors)

Low Voltage Disconnect module (battery board - BB) with battery breakers and terminal connectors (double)

BCU – basic control unit (module) for control, monitoring and communications with LCD display and keyboard for self-guided controller operation, LEDs, RS232 and other interfaces

Batteries

Protections

Protections include:

Overload (current limit) and short circuit protection, active and passive, programmable

Electronic Low Voltage Disconnect (LVD) - over discharging protection; value of battery turn-off threshold is programmable through keyboard or RS232 interface

Battery current overcharging – value of charg-ing current is controlled (apart of control module - BCU) and programmable through keyboard or RS232 interface (BCU)

Over Voltage Protection (OVP) – output dc voltage and input ac voltage, active and passive

Thermal rectifier protection (active)

Page 102: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Batteries charging process

Rectifier moduleIM400

Charging current

REA

UCA

102

SN

N12

Po

wer

Sup

ply

Syst

em 5

4 Vd

c / 3

x 7

.5 A

System monitoring

System monitoring and control can be achieved locally or remotely - integrated through telecommunication network.

All main voltages and currents in system are measured and can be readout on display (also alarms) or via remote user PC-based software package; ac-cidental data, independently of usual measurements are buffered in history files.

Through keyboard and LCD display (local monitor-ing and control) next values are enable to adjust:

Number of shelves and number of rectifiers

Maximal load voltage and current

Battery turn-off threshold

Maximal battery charging current

Light indication of basic system alarms are realized with LEDs and also monitored with BCU. These alarms are:

Low ac input voltage (main supply alarm – MSA)

Rectifier fail (rectifier error alarm – REA)

Battery voltage less than 44.5 Vdc i.e. rest capacity ≤10% (under voltage alarm – UVA)

Battery alarm less than 53 Vdc (under charge alarm – UCA)

Input ac fuse failure (main fuse failure – MFA)

Battery fuse failure (battery fuse alarm – BFA)

Output load fuse failure (distribution fuse alarm – DFA)

Rack door open (open door alarm – ODE)

Green and red LED on each rectifier indicates correct work or rectifier fail.

Green and red LED on battery board indicates correct connection and battery employing.

Integrated System monitoring of basic alarms through telecommunication network is achieved in conjunction with other Iritel equipment using:

Q2 bus, with graphic oriented PC based software package (SUNCE-M option – network manager),

SN12 connection with flexible multiplexer FM2x2, using RS232 interface.

Page 103: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

103

SN

N12

Po

wer

Sup

ply

Syst

em 5

4 Vd

c / 3

x 7

.5 A

T E C H N I C A L D A T A

Input data

AC Input voltage 230 Vac (175 — 255 V)

AC Frequency 50 Hz (47 — 63 Hz)

Inrush current according to EN61000-3-2

Power factor ≥ 0.98

Rectifier IM400 up to 6 p.

Output voltage (main ac supply present) 54.6 Vdc 48 Vdc nominal

Output power 400 W nominal (7.5 A/54.6 Vdc)

Output current limit 7.8 A

Output dynamic responce (change load 20% to 100%) 1.5%

Output load line response ±1%

Output voltage noise ≤50 mVeff, ≤100 mVp-p

Psohometric noise Ueff ≤ 2 mV (according to CCITT norms)

Efficiency η > 87%

System data

Output voltage 54.6 Vdc, nominal

Charging current 3 A, standard (30 Ah capacity) adjustable: 2.2—22 A

Temperature compensation 4 mV/C°/cell standard, adjustable: 1—5mv/C°/cell

Max. Output voltage protection (adjustable using BCU) 50—58 Vdc

Max. Load current protection (adjustable using BCU) n x 7.5 A n - number of rectifier modules

Output specifications under absence of main ac supply

Output voltage 40 — 56 Vdc

Low voltage battery disconnect (LVD) turn-off threshold adjustable 40 — 44 Vdc

Battery turn-on threshold 49 — 52 Vdc

DC (load) distribution

DCD2 2 terminal connectors, up to 30A (automatic) fuse

DCD6 6 terminal connectors, up to 10A (slow) fuse

F - remotes alarms interface (DB9 connector)

Interface RS232

Number of signals (alarms) 8

Isolation optoisolation

Batteries 48 V/24 —180 Ah

Designed and tested according to

Safty standard EN 60950 (UL1950)

EMC standard EN 55022/CISPR22, class A

Environmental

Ambient operating temperature 0 to +50°C

Dimensions (V x L x H)

Rectifier (IM400) 150 x 105 x 200 mm

ETSI shelf (RE-SN1/2) 150 x 533 x 220 mm

ETSI cabinet 1000/1200/2200 x 600 x 300 mm

SN12

Page 104: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

104

Compact modular power supply system - one rack with 3 rectifier modules, power up to 2400 W

Full front access to supply system – easy installation and operation

Parallel working of rectifiers – active current sharing, true redundant configuration (N+1)

Power factor ≥0 .98

Optimal Charging of Batteries

Additional output for extra battery charging - optionally

Two independent battery breakers and two load breakers

Programmable battery low voltage disconnect (LVD) - optionally

Communication with remote monitoring center

Use of IRITEL SDNU System for remote monitoring and control of power electronic devices – optionally

SN12/110 Power Supply System 110 Vdc / 3 x 7.5 A

Po

we

r E

lec

tro

nic

s

Page 105: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

105

SN

12/1

10 P

ower

Sup

ply

Syst

em 1

10 V

dc /

3 x

7 .5

A

Description

SN12/110 system is power solution designed for measurement, control , regulat ion and telecommunication applications with 110 Vdc (nominal) on output. Voltage supplied to load need to be reliable and permanent DC power supply regardless on main supply failure.

Power supply system SN12/110 is modular and consists from up to 3 rectifier modules in one rack. System is positioned inside cabinet (with additional place inside for other devices included monitoring and control equipment and/or smaller batteries). SN12/110 can be configured for different load power: 800, 1600 or 2400 W. In redundant configuration of power supply system (N+1), reserve rectifier is also active and work in parallel work with others rectifiers. Accuracy of rectifiers active current sharing is 5%.

SN12/110 are delivered in two configurations: basic (described above) and extended for additional batteries charging. Second version going when additional string of batteries is present at user. That auxiliary battery string is connected with primary set of batteries when battery voltage goes under 107 V (without presence of main ac voltage). In this configuration, additional battery charger is delivered with SN12/110 V.

Batteries are paralleled with load and system output. Battery management includes controlled current charging of batteries independent of load current (IU characteristic), automatic tempera-ture compensation. Up to two battery sets can be connected to SN12/110 (parallel to each other).

Temperature compensation with additional ca-ble and sensor is available, also, programmable low voltage disconnect (optionally).

System overview

SN12/110 system is composed of:

AC distribution (ACD)

Up to 3 rectifier modules (IM800), power of each rectifier 800 W (nominal)

Load (DC) distribution (DCD2) with two fuses (two equal terminals for user)

Battery board (BB) with double battery fuses and terminals (for two battery sets) – delivered optionally with Low Voltage Disconnect (LVD) part inside module

BCU – basic control unit for control, monitoring and communications, with LCD display and keyboard for selfguided controller operation, LEDs, RS232 and other interfaces

Module for connection with additional battery set - delivered optionally

Protections

Protections include:

Overload (current limit) and short circuit protection, active and passive, programmable and with fuses

Electronic Low Voltage Disconnect (LVD) – bat-tery over discharging protection; value of battery turn-off threshold is programmable (through keyboard or RS232 interface) – this is optionally

Battery current overcharging – value of charg-ing current is controlled independently of load current (even in the case BCU is not active for some reason) and programmable through keyboard or RS232 interface (BCU)

Over Voltage Protection (OVP) – output dc voltage and input ac voltage, active and passive

Thermal rectifier protection (active)

ACD

IM800

IM800

IM800

DC

D2

BB

BCURS232

1

2Loads

Battery

230 Vac

110 Vdc

(Ethernet)

Power supply system SN12/110

block diagram

Page 106: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

Batteries charging processRectifier module IM800

REA

UCA

Time

VboostVfloat

Icharging

“I” part of charging characteristics

“U” part of charging characteristics

Battery voltage

Battery current

SN12/110 with other equipment in closed cabinet

106

SN

12/1

10 P

ower

Sup

ply

Syst

em 1

10 V

dc /

3 x

7 .5

ASystem monitoring

System monitoring and control can be achieved locally (display and keyboard on BCU) or remotely through existing telecommunication network. All voltages and currents in system are measured and can be readout on BCU display (also alarms if exist) or via remote user PC-based software; accidental data, independently of usual measurements can be buffered in databases.

Local monitoring and control through keyboard and LCD display on BCU module allows:

Measuring of voltages and currents in the system

Adjusting of next working parameters:

Number of shelves and number of rectifiers

Maximal load voltage and current

Battery turn-off threshold (optionally)

Maximal battery charging current

Floating and boost voltage and value of current when system goes from boost to float voltage on output

Local light indication of basic system alarms are realized with LEDs on BCU mask. These alarms are:

Low ac input voltage (main supply alarm – MSA)

Rectifier fail (rectifier error alarm – REA)

Battery voltage less than 93 Vdc i.e. rest capacity ≤10% (under voltage alarm – UVA)

Battery voltage less than 107 Vdc (under charge alarm – UCA)

Input ac fuse failure (main fuse failure – MFA)

Battery fuse failure (battery fuse alarm – BFA)

Output load fuse failure (distribution fuse alarm – DFA)

Green and red LED on each rectifier indicates correct work or rectifier failure.

Green and red LED on battery board indicates correct connection and battery employing.

Connection with system for remote monitoring and control

SN12/110 can be connected with any other commu-nication system. Data formatting and protocol are known to end user. For example, System for remote monitoring and control of power electronics – SDNU (IRITEL) or monitoring system SUNCE-M (Network Manager, IRITEL) can be used to communicate with SN12/110 (monitoring of values, control of system by changing system working parameters, data collecting). Also, some already existing monitoring system at user or just PC based software (delivered with SN12/110) are also suitable.

Page 107: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

107

SN

12/1

10 P

ower

Sup

ply

Syst

em 1

10 V

dc /

3 x

7 .5

A

T E C H N I C A L D A T A

Input data

Input voltage 230 Vac (175 — 255 V)

Frequency 50 Hz (47 — 63 Hz)

Inrush current according to EN61000-3-2

Power factor ≥ 0.98

Rectifier IM800 up to 3 pc.

Output voltage (nominal) 110 Vdc Output power 800 W nominal (7.5 A/110 Vdc)

Output current limit 7.5 Adc

Output dynamic response (change load 20% to 100%) 1.5%

Output load line stability ±1%

Output voltage noise ≤ 50 mVeff, ≤ 100 mVp-p

Efficiency η > 87%

System data

Output voltage 110 Vdc, nominal

Max. Output voltage (adjustable using BCU) 116 - 128 Vdc

Max. Load current (adjustable using BCU, n - number of rectifier modules) n x 7.5 A

Charging current 0.1C standard adjustable: 2—16 A

Temperature compensation 4 mV/C°/cell (standard), adjustable: 1—5mv/C°/cell

Output specifications under absence of main ac supply

Output voltage 90 — 120 Vdc

Low voltage battery disconnect (LVD), adjustable, optionally 88 — 96 Vdc

Battery turn-on threshold, adjustable 98 — 104 Vdc

DC (load) distribution

DCD2 2 terminal connectors, up to 30 A fuse (ceramic, 6.3x32 mm)

F - remote alarms interface (DB9 connector)

Interface RS232

Number of signals (alarms) 8

Isolation optoisolation

Designed for Batteries with capacity 110 V/24 – 200 Ah

Designed and tested according to

Safety standard EN 60950 (UL1950)

EMC standard EN 55022/CISPR22, class A

Environmental

Ambient operating temperature 0 to +50°C

Dimensions (L x W x H)

Rectifier (IM800) 150 x 105 x 200 mm

ETSI rack with fan unit 195 x 533 x 220 mm

ETSI cabinet 1000/1200 x 600 x 450 mm

SN12/110 with extra battery charging, additional devices and system for remote

monitoring and control (DNU24) in one cabinet (1000 mm)

Page 108: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

108

Compact uninterruptible dc power supply system - in one enclosure:

Rectifier 230 Vac/48 Vdc, up to 175 W

Battery Charger 220 Vac/40,5 — 56 Vdc, up to 125W

Batteries 48 Vdc/12 Ah/17 Ah/24 Ah

Low Voltage Disconnect block

Optimal Charging of Batteries

Each system is completely wired, charged and ready to go

NN301/48 Vdc Small DC Power Supply System

Po

we

r E

lec

tro

nic

s

Page 109: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

NN301 Block diagram

Batteries charging process

charging current

Batteries voltage

2x4A

2x4A

DC/DC Convertor MN 175Fuse

Control

Load

BatteriesDC/DC Convertor

Fuse

Fuse

230

109

NN

301

Sm

all D

C Po

wer

Sup

ply

Syst

em

Applications

DC power supply system NN301 is designed for:

Applications in which electronic equipment need to have reliable and permanent DC power supply regardless on main supply failure

Equipment to be used in telecom, datacom, and network applications

Equipment to be used in security and monitoring applications

Typical Applications

Fiber Optic Networks

Data communications

PABX/ISDN

Industrial

Customer premises

System overview

NN301 contains:

Rectifier/ Charger N301:

Rectifier - DC/DC converter (MN175) providing DC output power to load

Charger – DC/DC converter (MP125) providing battery charging:

Battery charging is independent of rectifier and move according to optimal charging characteristics given by battery manufacturer

It works like current/voltage source (IU char-acteristics)

System of semiconductor switches providing uninterruptible DC output power to load:

Connecting load and batteries when ac power is loss (rectifier off)

Assuring permanent power to load

Control block:

Controlling system of semiconductor switches mentioned above

Detection of system failures – overload detection, loss of AC detection, battery damage

Battery set (up to 24 Ah)

Enclosure

N301 can be used separately

Page 110: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

LED OUT

LED BAT

LED3 LED2 LED1 Remote Alarms

110

NN

301

Sm

all D

C Po

wer

Sup

ply

Syst

emProtections

Protections include:

Overload (current limit) and short circuit protection - both rectifier and charger

Over Voltage Protection (OVP) - both rectifier and charger

Electronic Low Voltage Disconnect (LVD) - Dis-connect the battery to the load when the battery drops below 40.5 V

Output fuse, one 5 A in-line with system negative output,

Batteries and charging

Inside NN301 are stored set of four sealed lead-acid batteries, standard dimensions, with maximum 24 Ah capacity. These kinds of batteries do not need special maintenance. Optimal charging process increasing working life (5 to 12 years) and protect from deter-mination. Automatic temperature compensation is accomplished using temperature sensor on batteries. Charging process has next stages:

Soft start, charging with constant current, Imax (charger working like current source)

Charging in two-stage voltage mode:

Boost mode - after reaching Vblk voltage, constant voltage of that value is maintained

Float mode - after charging current fall under Imin value, voltage become Vfloat (keeping that value), batteries are fully charged

System Monitoring

With LED indicators user can monitoring status of correct NN301 functioning:

Red neon light on main switch – presence of ac voltage

Green LED OUT – power to load from rectifier (ac lines)

Green LED BATT – power to load from batteries

Green LED1 – charging of batteries in Current/Boost Voltage mode

Yellow LED2 – charging of batteries in float mode

Red LED3 – failure of batteries or decreasing of battery capacity

Remote alarms - optoisolated interface:

Failure (loss or incorrect) main supply voltage

Output power from batteries (rectifier do not work)

Battery low level (remain battery capacity low)

Non-correct charging of battery (failure of charger or batteries)

Page 111: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

111

T E C H N I C A L D A T A

Input data:

AC Input Voltage 230 Vac +10%/–15%

AC Frequency 50 Hz ±5%

Output data (MN175)

Output voltage (main 48 Vdc, nominal, ac supply present) adjustable: 48 – 49.5 Vdc

Output power 175 W nominal, (3.7 A/48.6 V)

Output current limit 4 A, nominal, adjustable: 4.2 – 1.8 A

Output dynamic response (change load 20% to 100%) ±1.5%

Output load line response ±1%

Output voltage ripple and noise ±50 mVmax

Psohometric noise Ueff ≤1mV

Efficiency η >80%

Output data (MP125)

Output battery voltage 54 Vdc, nominal

Output battery voltage in charging process

Vfloat: 54.6 Vdc, nominal, adjustable: 51 – 55 Vdc (2.275 V/cell, adjustable: 2.12 – 2.3 V/cell)

Vbulk: 57.5 Vdc, nominal, adjustable: 53.5 – 58 Vdc (2.4 V/cell, adjustable: 2.2 – 2.4 V/cell)

Charging current: 2.4 A standard/nominal, adjustable: 2.4 A-1A

Temperature 4 mV – /C/cell standard, compensation: adjusatable: 1 – 8 mV/C/cell

Output data under failure of main ac supply:

Output voltage 40.5 – 56 Vdc

Low voltage battery disconnect (LVD) threshold adjustable 40 – 44 Vdc

Threshold of battery connect 45 – 47 Vdc

Standard battery delivered within NN301:

NP24-12, 12V/24Ah, Yuasa, 4 pcs. in set

Battery recharge time 10h (±1h)

Remote alarms interface (DB9 connector):

Number of signals (alarms) 4

Isolation optoisolation

Output voltage 5 – 10 V

Designed and tested according to:

Safety standard EN60950 (UL1950)

EMC standard EN55022/CISPR22, class A

Environmental:

Ambient operating temperature +50C to +500C

Dimensions:

Physical Size (WxLxH) 415 x 250 x 301 mm

Weight 50 kg (with batteries)

NN

301

Sm

all D

C Po

wer

Sup

ply

Syst

em

Page 112: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

112

300/400/600/800 W power uninterruptible power supply

Provide uninterruptible working of computer and telecommunication equipment supplying from line ac voltage

DC UPS is applicable in systems which already have equipment supplying from uninterruptible 24/36/48/110 V dc voltage sources

Protection of batteries from under voltage

Protection of devices from ac line disturbances and low line voltages

DC UPS Uninterruptible Power Supply with DC Output Voltage 300 Vdc

Po

we

r E

lec

tro

nic

s

Page 113: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

DC/DC

+

+–~

~

310 Vdc/300 Vdc

310 Vdc

300 Vdc48 Vdc

230 Vac

DC UPS Block diagram

113

Applications

DC UPS provides uninterruptible working of computer and telecommunication equipment normally supplying from 230 Vac line voltage, 300/400/600/800 W power.

Modern equipment, on their input, have rectifica-tion of line voltage, without line transformer. From the line voltage rectifier generates about 300 Vdc, which means that such devices could be supply with 300 Vdc (approximately) instead 230 Vac line voltage.

DC UPS use this possibility. On its output, when line voltage exists, DC UPS generates dc voltage (about 300 Vdc), made by rectification of 230 Vac line voltage. When line voltage is not present, dc output voltage is generated by converting reserve 48 Vdc input voltage (batteries). Reserve 48 Vdc is available in systems, which have uninterruptible dc power supply (for example, telecommunication companies, railroad companies, power distribution companies, etc.).

DC UPS-400 with built in charger (4.5 A/48 V) is marked DC UPS-400/P.

Switching from ac line supplying to reserve battery supplying and vice-versa, is going without time period of output voltage interrupt (that happens with classic off-line UPSs - at output of classic AC UPS exist inter-rupt in energy supply in period 5-15 ms, because of adding ac voltages, which are not synchronous). That can be accomplished because, on output of DC UPS, dc voltage generated from rectified ac line voltage and dc voltage generated from dc/dc converter are con-nected in parallel; their sum is output DC UPS voltage.

Signalization

LED1 Batteries are low and disconnected (Vbat < 44 Vdc)

LED2 Batteries are low (Vbat < 46 Vdc)

LED3 Line ac voltage is incorrect (not exist or the line is to low), load supplying come from batteries energy

LED4 Line is correct, load supplying come from line energy

DC

UPS

U

nint

erru

ptib

le P

ower

Sup

ply

with

DC

Otp

ut

Vol

tage

300

Vdc

Input voltage 230 Vac (205 — 252 V)

Line voltage frequency 48 — 64 Hz

Input dc voltage (batteries) 48 Vdc Optional 24/36/110/220 Vdc Output dc voltage working “on” line voltage 310 — 340 Vdc working “on” batteries 300 Vdc Load power 300/400/600/800 Wmax

Switch time from working on line to working on batteries 0 ms

Protection of batteries from overdischarge <44 Vdc

Batteries charging time (48 V/38 Ah) DC UPS-400/P <10 h

Number of output connections DC UPS-300 4 DC UPS-400 5 DC UPS-600/800 3

EMC standard Class B

Safety standard EN 60950

Dimension (H x W x L) DC UPS-300 57 x 237 x 335 mm DC UPS-400/ 600/800 88 x 258 x 423 mm

Weight DC UPS-300 2 kg DC UPS-400/600/800 5 kg

T E C H N I C A L D A T A

DC UPS-300 DC UPS-400 DC UPS-600/800

Page 114: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

114

SF25 - additional level of security in the overall power supply system

Monitoring the voltage of each phase from the three-phase mains connection

Supplying one-phase user by choosing priority phase (Vac>180Vac) from a three-phase main connection

Maximum load current 25A

Voltage and time hysteresis during restore of the correct phase

SF25 Phase Selector

Po

we

r E

lec

tro

nic

s

Page 115: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

SF25 Block diagram

115

Applications

Phase Selector is a device whose input is three-phase voltage and one phase is forwarded to the output. Neutral is directly forwarded to the output.

SF25 continuously monitors all present phases present and based on the fact the phases are correct or not and their mutual priorities, deter-mine which phase will be forwarded to the user (output).

Line is correct if the phase voltage is greater than the minimum. In this way, phase selector plays the role of an additional level of security throughout the whole power supply system.

With disappearance of one or two phases, user did not stay without main power supply

Basic functions

The user is connected to one phase only. The control electronics determines which phase form the input will be forwarded to the output. Selector switches off the active phase when registering their disappearance or too low voltage. After that connects the load to the next correct phase, in accordance with the priority of the phase that is determined in advance.

Switching is performed by relays. The time between fault phase detection, the incorrect phase switch-off and move to the next correct phase, is about 100 msec.

For each phase there is a voltage and time hysteresis.

Voltage hysteresis means that, when the phase come on again, after disappearance, voltage must be greater than the upper threshold of hysteresis (eg. 200 Vac), to forward this phase to user again. During the work, phase voltage must be greater than the lower hysteresis threshold (eg. 170 Vac), to consider the phase is correct.

Time hysteresis means that, after the detection of phase failure, during the one period of time (about 7-8 seconds), return of the same phase to user is stopped (although it is correct and have a greater priority than the current active phase). In this way, it overcomes the problem of instability of the main power network during disappearance of one of the phases.

Local monitoring of the SF25 functioning and situation with phases can be done via leds.

SF25 can be delivered to customer already wired

SF25

Pha

se S

elec

tor

Controlelectronics

Controlelectronics

Controlelectronics

Load(user)

R

S

T

0

230 Vac

T E C H N I C A L D A T A

InputInput voltage per phase 230 Vac nom.

Frequency 50 Hz nom.

Input current per phase 25 Aac max

Phase selector operating parametersTime hysteresis 5 sec min.

Hysteresis voltage 40 V min.

Phase switch-off (for European standard) 180 Vac nom. Fixed Adjustable 165 – 210 Vac

Input/output terminal connectionsTerminals, for cable cross-section (min) 6 mm2

Local LED signalizationControl electronics green LED

Correct phase green LED (one per phase)

Designed and tested according to

Safety standard EN60950 (UL1950)

EnvironmentalAmbient operating temperature – 25C⁰ to +50C⁰

Air circulation Natural

DimensionsPlastic box (WxDxH) 200 x 155 x 80 mm

Enclosure protection IP55, IP56

Page 116: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

SMT ASSEMBLY

Continuous flow SMT line

Components QFP, QFN, CSP, 0201 to 55mm, fine pitch ≥0 .4 mm

BGA, μBGA ≥0 .5 mm

RoHS & non-RoHS Services

PTH, SMT & mixed technology, Hi-Tech assembly

Top and bottom placement with Single & double-sided assembly

Selective soldering of TH components

No-Clean flux process and closed loop aqueous cleaning system

Repair and rework including BGA & QFP

Automated Optical Inspection

116

Complete electronic & mechanical design

PCB design service

Electronic and electromechanical assemblies

Wire/cable assembly

Funcitonal testing

Temperature cycling

Burn-in test

Two surface mount manufacturing lines

Line for manufacturing prototype

Manufacturing and Assembly of Electronic DevicesC

on

tra

ct

Ma

nu

fac

turi

ng

Page 117: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

117

Manufacturing possibilities

Automatic continuous f low SMT line with 70,000 chp/h capacity:

Dual vision screen printer

Two SMD automatic pick & place machines

Reflow soldering processes - 7 and 9 temperature zones

Automatic optical inspection

Automation

Other manufacturing equipment:

Automatic wave soldering, two waves

Selective soldering of TH components

Di water cleaning, 4 chambres

Alcohol solvent cleaning

Four clima chambres

Assembled PCB rework system

Prototype and low volume manufacturing line:

Semi-automatic screen printer

Automatic pick and place components (SMD)

Reflow soldering process with 4 temperature zones

Man

ufac

turi

ng a

nd A

ssem

bly

of E

lect

roni

c D

evic

es

Page 118: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

118

Reliability prediction of component parts, equipment and systems

Reliability testing of component parts, equipment and systems

Burn-in testing of component parts, equipment and systems

Environmental testing of component parts, equipment and systems

Attesting of component parts, equipment and systems

Quality AssuranceM

an

ag

em

en

t S

ys

tem

Page 119: CATAOGUE - Iritel  · PDF fileCATAOGUE. 2 IRITEL a.d. BEOGRAD IR ITEL ... IMG Media Gateway ... MSAN/DSLAM Set top box Broadband

119

Quality Assurance

Permanently quality improvement of ours existing products and service, and quality assurance of new products represent one of our basis business policy (politics).

IRITEL’s Quality and Environmental management’s policies are based on national and international reference standards SRPS ISO 9001:2015, SRPS ISO 14001:2015, SRPS OHSAS 18001:2008, SRPS ISO/IEC 27001:2014 and СОРС 9000/14.

Testing determin conformity of product character-istics to standards, technical regulations and specifica-tion: Serbian standards (SRPS), international standards (ISO, IEC, CEE) and military standards (SNO, MIL).

Environmental Testing

In our environmental testing laboratory we simulate the environmental conditions to which various prod-ucts are exposed.

We simulate the conditions to which electrical devices are exposed during both, transportation and operation.

We simulate extreme temperature and humidity in various combinations.

Qua

lity

Ass

uran

ce

Climatic exposures: Cooling up to –80°C

Heating up to +100°C

Humidification study state and cyclic, from +10°C to +90°C, and 10% to 98% relative humidity

Salt mist testing

Mechanical resistance: Test samples can be exposed to diverse mechani-

cal impacts on all three axes:

Sinusoidal vibrations at constant frequency

Sinusoidal vibrations at changing frequencies (frequency range from 5 Hz to 2000 Hz with ac-celerations up to 50 g)

Bump testing with accelerations up to 40 g

IP testing:IP testing helps us to confirm the level of protection against access to dangerous parts, ingress of solid foreign objects (major objects, testing finger, thorn, wire, dust), and ingress of water.