Catalogue - Pinmar Supply€¦ · Catalogue sikkens wood coatings | c atalogue . Sikkens Wood Coatings is an AkzoNobel brand The content and works created by us on these pages are

aLL For PerFecT Wood coaTingS

From our passion for the natural material wood, high-quality prod-ucts have been created which are directly useful to you. detailed infor-mation on our products, our advice as well as useful tips can be found in this catalogue.

Perfect coating systems for wooden components – we work with pas-sion for this.

Passion for wood

Catalogue

sikk

ens

woo

d co

atin

gs |

cata

logu

e

Sikkens Wood Coatings is an AkzoNobel brand

The content and works created by us on these pages are subject to German copyright. The duplication, editing, distribution and any form of use outside of the limits of German copyright require the written consent of Akzo Nobel Wood Coatings GmbH.

Copying this brochure is only permitted for private, non-commercial use. If the content on these pages was not created by Akzo Nobel Wood Coatings GmbH the copyright of third parties is observed. In particular, content from third parties is identified as such. Should you nevertheless find a copyright infringement, we ask that you advise us accordingly.

Ewout Bosman, Brand Manager Sikkens Wood Coatings

2 3

Our passion for wood comes from an intensive relationship to this valuable raw material. We work, with heart and mind, to keep its quality. The natural properties of wooden parts are processed with Sikkens Wood Coatings systems and therefore permanently maintain their beauty.

Here, passion for wood is not an abstract characteristic but an every-day practice when dealing with our customers. You can personally convince yourself of this to the smallest detail.

Sikkens Wood Coatings products represent our performance and, thanks to our expert advisors, you can expect to be expertly support-ed in terms of system technology and the right application method. Partner-like cooperation is also a part of our passion for wood.

To deliver the highest possible quality of coating system to you, so that you can achieve optimum wood surfaces, that’s my everyday drive. And that’s why we keep setting new standards with our wide product range and our service. Innovation and tradition are two properties which you will find are optimally combined in our Sikkens Wood Coatings brand. Trust us for a mutual protection of wood.

The catalogue shows our complete product spectrum and leads you to safe and convincing work results: from impregnation to primers and mid-coats and finally to top coats. We comprehensively inform you about innovative special coatings and care products.

Welcome at Sikkens Wood Coatings

We work with passion for wood and for you

Contents

Are you look for renovation products?

In the case of damage to the coating you should act quickly to avoid further damage. Renovation coating is easy with the high-quality products by Sikkens architectural paints, opaque coats and wooden varnishes. Further information can be found at www.sikkens.com

Translucent: CETOL®

Opaque: RUBBOL®

As of: July 2013

Due to the many substrates and object conditions, the buyer/user is not absolved of their obligation to check our materials are suitable for their intended use under the respective object condi-tions and to correspondingly process them according to the respective state-of-the-art technology.

4 5

RUBBOL® WF 382Duraflex-Technology

29

RUBBOL® WF 387 Duraflex-Technology

29

RUBBOL® WF 375 30

RUBBOL® WF 378 30

RUBBOL® WF 380 31

RUBBOL® WF 373 31

RUBBOL® WF 390 31

CETOL® WF 952Duraflex-Technology

32


32

CETOL® WF 950 33

CETOL® WF 955 33

CETOL® WF 973 33

Natural effect – coatings 34

CETOL® WF 748 35

CETOL® WF 758 35

CETOL® WF 980 35

Special coating systems 36

CETOL® WF 771 36

CETOL® WF 761 37

RUBBOL® WF 361 37

Introduction Impregnation/impregnating primer

Sealant Other products Information and services

Impregnation 13

CETOL® WV 885 BPD+ 13

impregnating primer 13

CETOL® WP 567 BPD 13

RUBBOL® WP 193 15

RUBBOL® WP 194 15

RUBBOL® SP 110 16

RUBBOL® WP 151 16

CETOL® WP 575 17

CETOL® WP 560 17


CETOL® WP 566 18

CETOL® SP 520 19

06 12 20 38 48RUBBOL® WM 270 25

RUBBOL® WM 274 25

CETOL® WM 610 26

CETOL® WM 665 26

CETOL® WM 675 Ion-Lock-Technology

27

CETOL® WM 680 Ion-Lock-Technology

27

AkzoNobel 06

Wood Finishes and Adhesives Europe

07

Sikkens Wood Coatings 08

Product identification 10

Kodrin WV 456 21

Kodrin WV 457 21

Kodrin WV 458 21

Kodrin WV 470 22

Kodrin WV 472 22

Filler 23

Acrylic fine filler 23

Care products 38

Application 38

Maintenance set for windows 39

Maintenance milk for windows

39

Special cleaner for windows and doors

39

Sikkens Wood Coatings care cloth

39

Mounting products 40

ST 860 41

RUBBOL® WP 105 41

CETOL® WP 510 41

RUBBOL® WF 310 42

RUBBOL® WF 318 42

CETOL® WF 905 43

CETOL® WF 910 43

CETOL® WF 915 43

Additional products 44

ST 825 45

ST 830 45

WV 820 46

WV 830 46

WV 850 46

WV 888 47

WV 890 47

WV 891 47

Innovative technologies 48

Highlights: Ion-Lock-Technology

50

Highlights: Duraflex-Technology

51

CETOL® System brief description

52

CETOL® System wood types

53

RUBBOL® System brief description

54

RUBBOL® System wood types

55

House door system 56

Wood-aluminum window system

57

Joinery Colour Classics 58

CETOL® colour collections 59

RUBBOL® colour collections

60

Colour mix system 61

Acomix tone paste 61

Know-how 62

Mid coatPrimer

14 24Top coat

28

Intr

oduc

tion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

7

AkzoNobel is a globally leading manufacturer of colours and paints and a leading producer of special-purpose chemicals. We provide companies and consumers across the world with innovative products and work passionately on the development of sustainable solutions for our customers. Our headquarters are in Amsterdam, the Netherlands, and always lead the way in the area of sustainability. Our 50,000 employees in over 80 countries are dedicated to excellence and strive towards staying true to our motto: "Tomorrow’s An-swers Today™".

You can find our products everywhere, from the Olympic stadia in China to the Sydney Har-bour Bridge – and probably even in your own house. We have a permanent exchange of information with our customers in order to review our own expectations and to continuously improve our-selves. Nowadays, along with high standards in quality and safety, we also fulfill the sustain-able protection of the environment thanks to optimum resources and energy use. www.akzonobel.com

AkzoNobel – Tomorrow’s Answers TodayTM

Locations

European headquarters andEastern region headquartersCasco Adhesives ABP.O. Box 11538100 61 StockholmSwedenPhone: +46 874 34000Fax: +46 864 31607E-mail: [email protected]

Northern region headquartersAkzo Nobel Industrial Coatings ABStaffanstorpsvägen 50205 17 MalmöSwedenPhone: +46 403 55000Fax: +46 403 55132

Western region headquartersAkzo Nobel Industrial Coatings LtdDuesseldorfer Strasse 96-10040721 HildenGermany Phone: +49 210 377800Fax: +49 210 377577

Southern region headquartersAkzo Nobel Industrial Coatings S.p.a. Divisione WoodVia Spangaro, 130030 Peseggia di Scorzè (VE)ItalyPhone: +39 415 898111Fax: +39 415 898191

Wood Finishes and Adhesives – world of innovations

Wood Finishes and Adhesives is a globally recognised supplier of in-dustrial wood coatings supplying the leading manufacturers of wall cladding, furniture, carpets and wood for outdoor use, such as win-dows and doors. They trust our products to attain the desired look and the required protection.

Our customers benefit from our complete coating range as well as from our market-leading wood adhesives and resin products which can preferably be used as a adhesive system for wood composites and laminates.

Patented application systems for adhesives maximise the productivi-ty and minimise the environmental burden. A comprehensive techni-cal service ensures that our products work effectively and efficiently in the workshops of our customers.

www.akzonobel.com/wood

Intr

oduc

tion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Wood Finishes and Adhesives belongs to the Performance Coatings Division of AkzoNobel which is specialised in high-performance coatings and which delivers to a diversified customer base from the construction sector to household electronics and shipbuilding to sport equipment manufacturers. Our business division of industrial wood coatings – Sikkens Wood Coatings – has been a part of Wood Finishes and Adhesives since the start of 2010.

6

98

Passion for woodSikkens Wood Coatings – we want to share our passion for wood with you

But our successes of the past do not blur our vi-sion of the future. Quite the opposite – we see the challenges very clearly and have developed ideas and visions in order to master them.

Top-class customer supportThis claim is right at the top of the agenda at Sik-kens Wood Coatings and you benefit from this – on a daily basis. But we are not just about top-class service, but also about using cooperation to develop a partnership with our customers which meets the high demands of the future.

We strongly believe that together we can be more successful!

Ensure quality – advance innovations.The demands for high-quality products are contin-uously redefined. There are new benchmarks in economy and ecology. This is just as much about optimising the product and process complexity as it is about fulfilling high environmental standards. Manufacturers and processors need sustainable, innovative solutions in order to keep generating growth. We offer this for your benefit.

Our passion for wood helps us to not only keep traditional values, but to innovatively develop them further. It would be nice if we took this path together.

The Sikkens brand was founded in 1792 from which many business divisions developed. Experience, expertise and tradition – all attributes which are reflected in our top-class products. You can bet on this and always rely on it – quality from the market leader.

Passion for wood

Intr

oduc

tion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

1110

Impregnation/ Impregnating primer

Primer

Mid coat

Top coat

Fresher and more informative: Sikkens Wood Coatings in a new look

CETOL®

Satin matt mid and top coat

Seidenmatte Zwischen- und Schlussbeschichtung

Semi-finition et finition satinée mate

Zijdematte voor- en aflak

Jedwabisto matowa powłoka pośrednia i nawierzchniowa

Hedvábně matná mezivrstva a konečná vrstva

Полуматовое промежуточное и финишное покрытие

WF 952

BASE TU 20 L 7000080 13075188-006251-200

VOC: 2004/42/EC - IIA/e: 130g/l (2010). <= 36g/l.

For professional use only

GB Akzo Nobel Industrial Coatings Ltd Mercer Way Blackburn UK BB1 2QZ +44 12 54 68 79 50This product is not classified according to EU legislation. Safety data sheet available for professional user on request.

DE Akzo Nobel Wood Coatings GmbH Düsseldorfer Str. 96-100 40721 Hilden Germany +49210377800Dieses Produkt ist gemäß EU-Gesetzgebung nicht eingestuft. Sicherheitsdatenblatt auf Anfrage für berufsmäßige Verwender erhältlich.

CZ Akzo Nobel Industrial Coatings AB SE-205 17 Malmö +46 40 35 50 00Tento produkt není klasifikován v souladu s legislativou EU. Pro profesionální uživatele je na požádání k dispozici bezpečnostní list.

NL Akzo Nobel Decorative Coatings bv P.O. Box 3 NL-2170 BA Sassenheim +31 71 308 6944Dit product is niet als gevaarlijk geclassificeerd volgens de EU-regelgeving. Inlichtingenblad aangaande de veiligheid is voor de professionele gebruiker op aanvraag verkrijgbaar.

FR Akzo Nobel Industrial Finishes SAS 4, rue Pasteur 91580 ETRECHY +33 1 69 78 70 80Ce produit n‘est pas classé selon la législation de l‘Union européenne. Fiche de données de sécurité disponible sur demande pour les professi-onnels.

PL Akzo Nobel Industrial Coatings sp. z o.o. Ul. Polna 1A 62-025 Kostrzyn Polska +48 61 89 70 500Ten produkt nie jest sklasyfikowany zgodnie z przepisami Unii Europejskiej. Karta charakterystyki dostępna na żądanie użytkownika prowadzącego działalność zawodową.

RU Сделано в Швеции. Поставщик: ООО «Акзо Нобель ЛКМД», 194362, С-Петербург, Парголово, Горское ш., д. 4, Тел:+7 812 325 69 56Этот продукт не классифицирован в соответствии с правилами Европейского Сообщества. Паспорт безопасности предоставляется профессиональному пользователю по запросу.

AKZO-13-049 Cetol_WF952_20l_Lieferprogr.indd 1 18.07.13 10:10

Our goalsIn these goals you can find both the EAN number, the information on the product version and the batch number. Additionally, further numbers are included that affect our production process.

QR codeScan this code using your smart-phone and you will receive all impor-tant information on technical data-sheets and safety datasheets as a download, for example.

Product informationHere you can find some brief information about the product in various languages.

Safety informationAll important safety information and the contact details for the various countries are listed here.

BackgroundA grained wood background identifies products from the CETOL® group. An opaque colour, on the other hand, is used in RUBBOL® products.

PictogramHere you can find out everything important about the properties of the product.

Colour codeThe colour tone makes it clear in a single glance which coating level the product in question is.

Product descriptionOur product description CETOL® stands for translucent and RUBBOL® for opaque products.

Product nameThis is where the product name is written.

Intr

oduc

tion

Impr

egna

tion/

Im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Three-digit number100 sprayable opaque primer200 opaque mid coat300 opaque top coat400 sealants500 translucent primer600 translucent mid coat700 translucent top coat800 waterproofing, thinning,

defoamer900 translucent top coat

Explanation of the pictograms and the code system.

Wooden components according to DIN EN 927-1Classification according to field of application

Sikkens Wood Coatings Code System

Other pictograms

Windows, outer doors, conservatoriesStable

Wooden parts in the prefabricated section• High-quality profile boards • Matchboards/bargeboards • Stud frame, glue-laminate, purlin

profiles, rafters, outer gates, beam constructions, framework, folding shutters, exclusive garden houses and cottages, high-quality garden wood, wood-based panels as facade elements

Semi stable

Simple garden wood (trellis-work fences, blind systems, pergolas, carports,tread planks, etc.), toys, sheds, sties, rustic profile boards, cladding, timbering, terraces, wood-en floors

Nonstable

Water-soluble

Solventborne

Fill

Plank painting machine

Brush

VacumatFlowcoating

Dipping

Spraying

Natural effect – coating

Application levels Typical examples

S Solvent-basedW Water solubleP PrimerM Mid coatF Top coatT ThinningV Various

1312

Sikkens Wood Coatings impregnation Our impregnations offer you the greatest level of safety and improve the ‘natural durability’ of all softwoods and leaf woods. In the impregnation of individual parts, increased protection from blue stain and rotting is achieved, particularly in the tongue-and-groove areas.

Sikkens Wood Coatings waterproof primers Thanks to an innovative concept, you can benefit from two advantages at once. Wood protection and priming function are achieved in just one step with our 2-in-1 product.

This means: minimum effort, maximum profit. As up to 50 % of your material costs and 25 % of your processing time can be saved by using our impregnating base coat. The recommended appropriate application amount is 120–160 g/m2 for sapwood.

The wood is specially protected using our phase transfer technology developed in-house with our impregnating base coat as the ingredients are transported especially deeply into the wood. Thus it receives the necessary protection against blue stains and rotting fungi.

Phase transfer technology in Sikkens Wood Coatings impregnating base coats

The phase-transfer additive causes the fungicide to pene-trate from the watery phase (impregnating primer) into the solid phase (wood). There they take effect, all the way deep down into the wood.

Wood as a building material has to be protected against the continuous effect of moisture so that problems don’t crop up. The construction is primarily responsible for this. Should moisture ever penetrate the unit, our impregnations and impregnating primers offer a reli-able protection and therefore prevent blueing and discolouration.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

CETOL® WV 885 BPD+ 1 Colour shade Packsize Pallet unit

Colourless 2.5 l 20 l 120 l

144 × 2.5 l = 360 l18 × 20 l = 360 l4 × 120 l = 480 l

Impregnation with protection against blue stain and rotting for non-earthedwooden parts not under load, outside.

Water-soluble

Type of binder: Pure acrylic

Application: Dip, flow coating, brush

Fungicide effect: Protection against blueing and rotting. Safe use of biocides. Checked according to EN 599 and corresponds to the requirements of DIN 68800 part 3. Always read labeling and product information prior to use.

Fields of application: stable, semi stable, nonstable wooden components

1: Product availability is country-dependent.2: Colour tone availability is country-dependent.

Impregnation

impregnating primer

CETOL® WP 567 BPD 1 Colour shade

Packsize Pallet unit

Excerpt fromJoinery Colour Classics2

(For details see

www.sikkens-wood-coatings.com)

Base TC: 20 l/110 l

18 × 20 l = 360 l4 × 110 l = 440 l

Transparent waterproof primer with complete wood protection for static non-earthed wooden parts, outside. Impregnates and primes in one work step.

Water-soluble


Application: Dipping, flow coating, board painting machine

Fungicide effect: Protection against blue stain and rotting. Safe use of biocides. Checked according to EN 599 and corresponds to the requirements of DIN 68800 part 3. Always read labeling and product information prior to use.


Basis for the best protection: High-quality impregnation and impregnating primer

1514

Intro

duct

ion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

RUBBOL® WP 193

RUBBOL® WP 194

Colour shade Packsize Pallet unit

White 20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l


White 20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l

Primers are the connecting link between wood surfaces and coating. Their composition influence decisive characteristics of the coating system such as bonding.

The development of primer requires special dili-gence with respect to the selection of raw materi-al, testing and system compatibility. Thus we use technology on the basis of modern bonding dis-persions in water-thinnable products. The result is characterised by a high penetration capability with deep, permanent anchorage in the woods cell structure.

Varnish primersThe CETOL® WP series is available in a great variation of colour shades. Practically ever natural wood tone can be replicated. Through coordinated combination with top coats (CETOL® WF 950/955 or CETOL® WF 952/957), attractive system colour tones and company-custom collections can be created. Depending on the woods quality, its in-herent colour and surface structure can be inten-sified, leveled or concealed through specific se-lection of colour shade.

High-quality primers for more system security

Pro tip for varnish colour tone

Select a darker shade primer (e.g. Cetol® WP 560 = J085T) then paint over it with a lighter shade (e.g. Cetol® WF 955 = J006T) or choose the same colour shade for both primer and top coats.

Penetration and film formation of modern acrylic dispersions in pine wood.

White isolating sprayable base coat for wooden component, exterior and interior. The product has good pore wetting, high sandable pore filling capacity, is near odourless and easily sandable.

Water-soluble

Type of binder: Acrylic-alkyd resin

Application: Spraying

Fields of application: stable, semi stable wooden components

White base and mid coat with isolating effect against paint-discolouring wood extractives (concentrate) for wood parts, exterior and interior. Through double flow coating a dry film thickness of 30 µm can be reached.

Water-soluble


Application: dipping, flow coating


Primer

1716

Primer


Colourless,Sikkens standardcolours,Joinery ColourClassics.Further colour shadesavailable upon request.

Base TC/003:5 l/20 l/100 l

(in the 120 l vat)

72 × 5 l = 360 l18 × 20 l = 360 l4 × 100 l = 400 l


Colourless 5 l 72 × 5 l = 360 l

Transparent base coat for wooden component, exterior and interior.

Water-soluble

Type of binder: Acrylic copolymer



Colourless sanding sealer (concentrate) for wooden parts (mix ratio 1:3, 25 % product, 75 % water), exterior and interior.

Water-soluble


Application: dipping, brushing


CETOL® WP 560

CETOL® WP 575

Primer

White primer for wooden parts with isolating properties against wood extractives, exterior and interior.

Solventborne

Type of binder: Alkyd resin



Transportation tip: UN no.: 1263 ADR: Cl. 3, III

White 2K undiluted spray protection for house doors and MDF, exterior and interior. The product is made up of component A = primer and component B = accelerator.

Water-soluble

Component A: Acrylic-polyurethane resin combinationComponent B: Isocyanate

Application: SprayingMix ratio 5:1 (5 parts primer, 1 part accelerator)Pot life: approx. 2 hours after mixing


RUBBOL® SP 110

RUBBOL® WP 151


White 20 l 18 × 20 l = 360 l

Colour shade Packsize Order unit

White A: 4.16 l A: 1 × 4.16 l = 4.16 l

B: 0.84 l B: 6 × 0.84 l = 5.04 l

Sanding sealer pro tip The CETOL® WP 575 sanding sealer primarily serves the wood preparation to visually improve the subsequent coating quality. All water-soluble and/or solvent borne Sikkens Wood Coatings paint and varnish systems can be used on the precision ground wood surface pre-treated in this way.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

1918

PrimerPrimer


Sikkens standardcolours,Joinery Colour Classics

Base TC/003: 19.6 l

18 × 19.6 l = 352.80 l

Transparent primer for wooden parts, external with isolating properties against wood extractives.

Solventborne

Type of binder: Alkyd resin



CETOL® SP 520Colour shade Packsize Pallet unit

Excerpt fromJoinery Colour Classics2

(For details see

www.sikkens-wood-coatings.com)

Base TC/003:5 l/20 l/100 l(in the 120 l vat)

72 × 5 l = 360 l18 × 20 l = 360 l4 × 100 l = 400 l


Colourless,Sikkens standardcolours,Joinery Colour Classics

Base TC/003: 5 l/20 l

72 × 5 l = 360 l18 × 20 l = 360 l

Transparent, blue stain resistant primer for wooden parts, exterior.

Water-soluble


Application: Dipping, flow coating, board painting machine, Vacumat

Fungicide effect: Protection against blue stain. Safe use of biocides. Checked according to EN 599 and corre-sponds to the requirements of DIN 68800 part 3. Always read labeling and product information prior to use.


Water-soluble transparent base coat for wooden parts, exterior and interior.

Water-soluble

Binder type: Acrylic-alkyd resin


Fields of application: stable, semi stable, nonstable wooden parts


CETOL® WP 566

1: Product availability is country-dependent.2: Colour tone availability is country-dependent.

Intro

duct

ion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

2120

Kodrin WV 457

Kodrin WV 458

Colourless water-based sealant for safe spreading of end-grain surfaces. For opaque and transparent coatings, use after primer.


Application: Brushing, filling


White water-based joint sealer for sealing the end-grain to V-joints in wooden windows and doors for protection against moisture absorption, exterior and interior. For opaque (white and light) coatings, use after primer.

Type of binder: Special polymer dispersion

Application: Spraying in the V joint and smoothing off with the finger


Kodrin WV 456

Colourless water-based joint sealer for sealing the end-grain to V-joints in wooden windows and doors for protection against moisture absorption, exterior and interior. For opaque (coloured) and transparent coatings, use after primer.

Type of binder: Special polymer dispersion

Application: Spraying in the V joint and smoothing off with the finger



Colourless 750 ml 6 × 750 ml = 4.5 l


Colourless 250 ml 10 × 250 ml = 2.5 l


White 250 ml 10 × 250 ml = 2.5 l Moisture will enter wood through an untreated V joint

A closed V joint is watertight

Pro tip

Acrylic spatulaGouges from planing or worm holes: with the acrylic spatula in the practical, us-er-friendly tube allows you to repair these defect loca-tions in no time at all.

Protecting cross-grained woodThe water-based end-grain sealant Kodrin WV 456 for the safe spreading of end-grain surfaces can simply be applied with a brush.

Prevent moisture saturation with the right sealant

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Preventing damageFor long-lasting, preventative protection against moisture absorption in V joint areas we urgently recommend elastic sealing with Kodrin WV 472 for transparent and Kodrin WV 470 for opaque systems after the primer. This ensures the durabil-ity of the wooden window for your customer.

Additional cross grain protectionWooden windows are only functional as long as as they have all-round protection. Structural points are particularly susceptible to attack. For example, the corner joints of windows are always exposed to great stresses. This is because the wood’s movement forces work in different directions here and that can rapidly lead to open V joints. An open joint is an invitation for moisture to penetrate into the wood. The consequence: the wood will swell, fungal spores can intrude. Further consequential damage is possible. Our sealant products help here.

Sealant

2322


White 400 g tube 12 × 400 g = 4,800 g

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Acrylic fine filler

Spatula mass for opaque coatings, exterior and interior. For the closing of small surface defect locations of plane gouges and worm holes on primed wooden surfaces.

Water-soluble

Binder type: Styrol acrylate

Application: With conventional scrapers/knives


Kodrin WV 470(white and light coating)

Kodrin WV 472( transparent and opaque [coloured] coating)

Elastic sealant for V-joints in railing area, in wooden windows and doors, against permeation of moisture. For opaque white and light coatings, use after primer.

Binder type: Special polymer dispersion

Application: Spraying with dosage cartridge and subsequent smoothing with spatula or finger

Fields of application: dimensionally stable wooden components

Elastic sealant for V-joints in railing area, in wooden windows and doors, against permeation of moisture. For transparent and opaque (coloured) coatings, use after primer.

Binder type: Special polymer dispersion

Application: Spraying with dosage cartridge and subsequent smoothing with spatula or finger



White 320 ml cartridge 12 × 320 ml = 3.840 ml


Semitransparent 320 ml cartridge 12 × 320 ml = 3.840 ml

Sealant Filler

2524

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Mid coat


White 20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l


White 20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l

White mid coat with isolation against paint-discolouringwood extractives for wooden parts (not suitable for larch), exterior and interior.

Water-soluble




White base and mid coat for wooden parts, exterior and interior. Particularly suited to large pore timber species. Through double flow coating a dry film thickness of 30 µm can be reached.

Water-soluble


Application: Dipping, flow coating


RUBBOL® WM 270

RUBBOL® WM 274

Surfaces with 2-coat coverage (mid and top coats) are generally treated with the same product for both coats. But in many cases better results were achieved with a product combination. Sikkens Wood Coatings therefore recommends combined solutions for certain woods which prevent later formation of weak points.

Translucent mid coatsHard woods with large pore structures are often not optimally used in a conventional, sprayed mid coating on pore borders and edges. This means no homogeneous, sealed film can form at these positions with sufficient pore-filling. These critical zones are potential weak spots in later weathering as moisture and UV irradiation is able to pene-trate. A mid coat provides increased system safe-ty in such cases.

Opaque intermediate coatsIn woods rich in ingredients (except for larch), RUBBOL® WM 270 offers good protection against discolourations in combination with an isolating primer. The recommended drying times must be observed and upheld (see technical data sheet).

Mid coat as "system optimisation" for better results

2726

Find out more about Ion-Lock-Technology on page 50

Find out more about Ion-Lock-Technology on page 50

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Mid coatMid coat


Colourless: 003 20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l


Colourless: 003 20 l 18 × 20 l = 360 l

Highly transparent, isolating mid coat for wooden components, exterior and interior, very good pore wetting and pore-filling properties.

Water-soluble

Type of binder: Special acrylic copolymer



Highly transparent, isolating mid coat for wooden components, exterior and interior, very good pore wetting and pore-filling properties.

Water-soluble

Type of binder: Special acrylic copolymer

Application: Spraying, brushing (only for semi stable wooden parts)


CETOL® WM 675Ion-Lock-Technology

CETOL® WM 680Ion-Lock-Technology


Colourless: 003 20 l 18 × 20 l = 360 l


Colourless: 003 20 l 120 l

18 × 20 l = 360 l 4 × 120 l = 480 l

Highly transparent mid coat for wooden component, exterior and interior. Particularly good pore wetting and pore-filling on large-pore woods.

Water-soluble




Highly transparent mid coat for wooden component, exterior. The special wetting properties improve wood protection and ensure a good pore wetting and pore filling.

Water-soluble




CETOL® WM 610

CETOL® WM 665

29

Find out more about Duraflex-Technology on page 51


28

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Top coat


Pure white RAL 9010

20 l 18 × 20 l = 360 l

White similar toRAL 9016

20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l

Colour tones from 4041 Colour Concept,RAL and NCS

Base W05:5 l/10 l/20 l

60 × 5 l = 300 l36 × 10 l = 360 l18 × 20 l = 360 l

Base N00:4.9 l/9.8 l/19.6 l

72 × 4.9 l = 352.8 l36 × 9.8 l = 352.8 l

18 × 19.6 l = 352.8 l


White similar toRAL 9016, Pure white RAL 9010

20 l 18 × 20 l = 360 l


Base W05:5 l/10 l/20 l

60 × 5 l = 300 l36 × 10 l = 360 l18 × 20 l = 360 l

Base N00:4.9 l/9.8 l/19.6 l

72 × 4.9 l = 352.8 l36 × 9.8 l = 352.8 l

18 × 19.6 l = 352.8 l

Semi matt, opaque mid and top coats for wooden components, exterior and interior. Good durability and permanently elastic.

Water-soluble




Satin-gloss, opaque mid and top coats for wooden components, exterior and interior. Good durability and permanently elastic.

Water-soluble






Last, but not least: opaque and translucent top coats with long-term protection

There are the Sikkens Wood Coatings top coats for wooden components of great durability and aesthetics.

The opaque coatings of the RUBBOL® product family give wooden windows and doors a signifi-cantly greater durability. Because opaque coatings are especially robust.

The translucent CETOL® top coats give the natu-ral appearance of the wood a fresh, attractive look and also ensure surface protection.

Improved varnish film properties make the coating less sensitive to mechanical stresses.

Convince your customers with transparent, even surfaces – in different gloss grades and many wood colour shades.

3130

Combinable with WP 151: Page 16 and WV 850: Page 46

RUBBOL® WF 375

RUBBOL® WF 378

RUBBOL® WF 380

RUBBOL® WF 390

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

* The ‘HP’ designation in coloured bases will not apply in the near future. The qualities remain unchanged.

Top coat



10 l 20 l

36 × 10 l = 360 l18 × 20 l = 360 l

Satin gloss, opaque 2-component mid and top coats for house doors. Must be wetted before processing with WV 850. The addition of WV 850 can only be eliminated for non-weathered wooden parts, such as wood-aluminum con-structions and other wood surfaces in the interior.

Water-soluble

Type of binder: Acrylic-polyurethane resin combination



RUBBOL® WF 373

Top coat


Colour shades made from 4041 colour concept, RAL and NCS

Base W05: 10 l

36 × 10 l = 360 l

Base N00: 9.8 l

36 × 9.8 l = 352.8 l


RUBBOL® WF 378


20 l 18 × 20 l = 360 l

colourRUBBOL® WF 378 (HP)*Colour shades made from 4041 colour concept, RAL and NCS

Base W05: 5 l/10 l/20 l

60 × 5 l = 300 l 36 × 10 l = 360 l 18 × 20 l = 360 l

Base N00: 4.9 l/9.8 l/19.6 l

72 × 4.9 l = 352.8 l 36 × 9.8 l = 352.8 l

18 × 19.6 l = 352.8 l


RUBBOL® WF 380


20 l 120 l

18 × 20 l = 360 l4 × 120 l = 480 l

Pure whiteRAL 9010

20 l 18 × 20 l = 360 l

coloured RUBBOL® WF 380 (HP)*Colour shades made from 4041 colour concept, RAL and NCS

Base W05: 5 l/10 l/20 l

60 × 5 l = 300 l 36 × 10 l = 360 l 18 × 20 l = 360 l

Base N00: 4.9 l/9.8 l/19.6 l

72 × 4.9 l = 352.8 l 36 × 9.8 l = 352.8 l

18 × 19.6 l = 352.8 l


White aluminum metallic, mouse grey metallic, gold bronze metallic, ruby metallic, ultra marine blue metallic, moss green metallic and DB metallic colours

10 l 36 × 10 l = 360 l

Gloss, opaque mid and top coats for wooden components, exterior and interior.

Water-soluble




Satin-gloss, opaque mid and top coats for wooden components, exterior and interior.

Water-soluble




Semi matt, opaque mid and top coats for wooden components, exterior and interior.

Water-soluble




Mid and top coating with metallic effect for exterior and interior wooden components.

Water-soluble




32 33

Combinable with WV 850: Page 46



Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

CETOL® WF 950

CETOL® WF 955

CETOL® WF 973



Top coat Top coat


Sikkens Wood Coatings standard colour tones, Joinery Colour Classics

Base TU: 5 l/20 l

72 × 5 l = 360 l18 × 20 l = 360 l


Sikkens Wood Coatings standard colour tones, Joinery Colour Classics

Base TU:5 l/20 l

72 × 5 l = 360 l18 × 20 l = 360 l

Semi matt, transparent mid and top coat for wooden components, for interior and exterior, with the highest UV protection. Good durability and permanently elastic.

Water-soluble




Satin gloss, transparent mid and top coat for wooden components, for interior and exterior, with the highest UV protection. Good durability and permanently elastic.

Water-soluble





Colourless,Sikkens Wood Coatings standard colour tones, Joinery Colour Classics.Other colour shades on request.

Base TC/003: 5 l/20 l/120 l

72 × 5 l = 360 l18 × 20 l = 360 l4 × 120 l = 480 l


Colourless,Sikkens Wood Coatings standard colour tones,Joinery Colour Classics.Other colour shades on request.

Base TC/003: 5 l/20 l/120 l

72 × 5 l = 360 l18 × 20 l = 360 l4 × 120 l = 480 l


Colourless,Sikkens Wood Coatings standard colour tones, Joinery Colour Classics.Other colour shades on request.

Base TC/003: 10 l/20 l

36 × 10 l = 360 l18 × 20 l = 360 l

Satin matt, transparent mid and top coats for wooden parts, exterior and interior.

Water-soluble




Satin-gloss, transparent mid and top coats for wooden components, exterior and interior.

Water-soluble




Satin gloss, transparent 2-component mid and top coats for house doors. Must be wetted before processing with WV 850. The addition of WV 850 can only be eliminated for non-weathered wooden parts, e.g. wooden-aluminum constructions and other wooden surfaces on the interior.

Water-soluble

Type of binder: Acrylic-polyurethane resin combination



3534

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Top coatNatural effect – coatings

Top coatNatural effect – coatings



Base TC/003: 20 l

18 × 20 l = 360 l



Base TC/003: 5 l/20 l

72 × 5 l = 360 l18 × 20 l = 360 l



Base TC/003: 5 l/20 l/120 l

72 × 5 l = 360 l18 × 20 l = 360 l4 × 120 l = 480 l

Cloth-matt, transparent mid and top coats for wooden parts, exterior and interior. Thin or mid coat translucent coating system, emphasises the characteristic wooden structure as a natural effect translucent coating.

Water borne, natural effect coating


Application: Spraying (2 × 80 to 120 µm or 1 × 150 up to max. 200 µm)


Matt, transparent mid and top coats for wooden parts, exterior and interior. Thin or mid coat translucent coating system. Emphasises the characteristic wooden structure as a natural effect translucent coating.



Application: Spraying (2 × 80 to 120 µm or 1 × 150 up to max. 200 µm)


Natural matt, transparent mid and top coats for exterior and interior. Emphasises the characteristic wooden structure as a natural effect translucent coating.





CETOL® WF 748

CETOL® WF 758

CETOL® WF 980

Enjoy natureWe have the right products for you to enjoy your garden with wooden furniture without a great deal of maintenance:

With our oils and coatings we offer you products which are weather-proof and wa-ter-repellent. They are easy to process, offer outstanding protection and maintain the beauty of the garden. With our coatings, we offer great room for design with an attractive colour palette.

Natural effect – coatings: maintain natural beauty Since time immemorial, wood has been one of the materials with almost unlimited variety of use. As a renewable, energy-saving material, it has a spe-cial ecological value. But wood does not just have an exciting past, but also a big future. As it has outstanding material properties and a pleasant liv-ing ambience, houses, windows, doors, furniture and floors are built from it.

Those who experience wood with all their senses experience its value and see its natural beauty. The Sikkens Wood Coatings natural effect coat-ings maintain this beauty, protect the wood and increase longevity. The transparent, velvet-matt surfaces underline the wooden structure and show the wooden material from its most beautiful side.

3736

CETOL® WF 771

CETOL® WF 761

RUBBOL® WF 361

Low build, low sheen, transparent primer, mid and final coating in the 1 pot 3 coat system for wooden decks and other limited and dimensionally stable and nonstable wooden components outside.

Water-soluble


Application: Brushing, board painting machine, Vacumat, dipping, flow coating

Fields of application: semi stable, partially stable, nonstable wooden components

Semi matt, transparent base, mid and top coat of wooden components. Can be used as a 1-pot-3 coat system, exterior and interior.

Water-soluble


Application: Spraying, brush coating


Semi matt, opaque base, mid and top coat of wooden components. Can be used as a 1-pot-3 coat system, exterior and interior.

Water-soluble


Application: Spraying, brush coating


Top coatSpecial coating system

Top coatSpecial coating system

For a world full of colourWe have developed a special varnish in CETOL® WF 771 which maintains the unique wood effect and glistens with brilliant colours. The ranges of use include terraces, facade cladding, greenhous-es and garden furniture, pergolas such as roof structures, boardings and wooden constructions.

Two of our technologies have been successfully implemented here: CETOL® WF 771 re-fills the pores in wood to produce the Saturator-Effekt®, thus improving durability. With its two different layers, the Self-Stratifying® binder ensures good adhesion and protection against UV light and moisture. This is the best to protect and add value for wood and is especially suitable for highly exposed wood surfaces.

Our Never Ending Impressions collection offers you a wide spectrum of intensive colours and har-moniously balanced colour tones. Customers such as McDonald’s® or Walt Disney World® already use this huge range of colours. See page 59 for further information.

Function of the Self- Stratifying© binder

Binder 1 Binder 2

Protection for wood in the exterior – CETOL® WF 771Wood emphasises the natural environment in your garden and terrace. Wherever wood is used it creates the sense of well being and an ambience to the surroundings. Wood can be exposed to extreme weathering in directly exposed outdoor areas and will require special protection.

Never Ending Impressions.


Never Ending Impressions.Other colour shades on request.

Base TU: 2.5 l/10 l

144 × 2.5 l = 360 l36 × 10 l = 360 l


Joinery Colour Classics.Other colour shades on request.

Base TC/003: 1 l/2.5 l/10 l

462 × 1 l = 462 l144 × 2.5 l = 360 l

36 × 10 l = 360 l


White similar to RAL 9016

2.5 l/10 l 144 × 2.5 l = 360 l36 × 10 l = 360 l

Colour: Colour tones from 4041 Colour Concept, RAL and NCS

Base W05: 1 l/2.5 l/10 l

462 × 1 l = 462 l144 × 2.5 l = 360 l

36 × 10 l = 360 l

Base M15: 0.98 l/2.45 l/9.8 l

462 × 0.98 l = 452.76 l144 × 2.45 l = 352.8 l

36 × 9.8 l = 352.8 l

Base N00: 0.96 l/2.4 l/9.6 l

462 × 0.96 l = 443.52 l144 × 2.4 l = 345.6 l36 × 9.6 l = 345.6 l

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

3938

Maintenance set for windows

Maintenance milk for windows

Special cleaner for windows and doors

Sikkens Wood Coatings care cloth

Other products Care products

Care set for wooden windowsCleaning and maintenance with the famous Sikkens Wood Coatings care set (made up of a special cleaner and maintenance milk for windows) is essential for preserving value. Be it translucent or opaque – special cleaners and maintenance milk not only protect but also fresh-en up the colours. The windows of your customers will gleam with renewed brilliance. After use of the special cleaner, a treatment of the prepared coat-ing with our maintenance milk is recommended. The maintenance milk should be applied once a year in order to extend maintenance intervals and overall service life.

Care cloth for house doorsBe it painted or varnished house doors – the care cloth brings new lustre and additionally protects

against dirt and weathering influences. A regular application is sensible (once a year) in order to ef-fectively extend the renovation intervals and the life cycle of your high-quality wooden doors.

General care tipsWe recommend regularly cleaning wooden constructions with warm water and a mild deter-gent on the inside and outside as well as in the fold area. It should be ensured that the drainage openings are free so that rainwater can run off unimpeded. Oiling of the fittings with a fitting spray is also important for simple opening and closing as well as the processing of rubber seals with a seal care product for permanent elasticity and good sealing. These applications promise a long-lasting, good service life of windows and doors.

Colour shade Units

Colourless 1 set = 2 × 250 ml/10 pieces in the carton

Colour shade Units

Colourless 1 piece = 250 ml/12 pieces in the carton

Colour shade Units

Colourless 1 set = 2 × 250 ml/10 pieces in the carton

Colour shade Units

30 pieces in the carton

The gentle window maintenance refreshes the gloss and makes the window weather-proof again. Regular use extends the renovation intervals.

Contents: Special cleaner (250 ml), maintenance milk (250 ml), sponge, manual (leaflet)

Maintenance milk for freshening and weather protecting care of weathered coating surfaces on wooden windows. Regular use (1× per year) extends renovation intervals.

Watery cleaning solution for the cleaning and degreasing of closed surfaces, such as varnishes and translucent coats, plastics, metals, etc.

Application: For cleaning down to the pores before use of the maintenance milk or the care cloth (windows + front doors)

The gentle door maintenance refreshes the gloss of your wooden front door. Regular use extends the renovation intervals.

Wooden windows are high-quality products which enhance housing quality, ensure a cosy atmosphere and increase your sense of well-being. To ensure this stays this way, the wood itself should also be cared for with products from the wellness program.

Intro

duct

ion

Impr

egna

ting

prim

erPr

imer

Seal

ant

Mid

coa

tTo

p co

atOt

her p

rodu

cts

Info

rmat

ion

and

serv

ices

Intro

duct

ion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

The 1-2 and done care for wooden windows

1) Clean the coated wooden surfaces with the special cleaner.

2) Evenly apply the maintenance milk with a sponge. Done!

Sikkens Wood Coatings enhancement products – wellness for wooden windows

4140

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Right protection for wooden windows In order to avoid damages to the frame, sash or glass during installation, cleaning or painting, all surfaces around the window should be carefully protected. The foil and tape used must be free of plasticisers and solvents as well as be UV- and weather-proof (e.g. tesa 4438). Please never leave the wooden elements masked or covered for more than two weeks otherwise moisture could build-up in the wood. All plaster work and painting should be completed within three months of in-stallation.

Maintenance of surface coating The coating of your wooden windows should be maintained in regular intervals. Depending on the installation situation, we recommend a mainte-nance coat for opaque coatings after 4 to 5 years and translucent coatings after 2 to 3 years. You can use eco-friendly, water-borne Sikkens Wood Coatings products for maintenance purposes.

MaintenanceEven with the best products, defects can occur on rare occasions. To ensure these are quickly processed, a few things are to be taken into ac-count: It is important that the recommendations for maintenance and care are upheld and that the surface coating be annually checked for mechani-cal damage. Immediate, professional maintenance of even small damaged areas is urgently neces-sary and, in the event of a dispute, must be prov-en. This means: if small damages are discovered during care of the coating, then these are to be immediately remedied as part of maintenance in order to prevent the damage from progressing and to ensure the protective coating is preserved. The affected areas are always at least processed from V-joint to V-joint in the affected areas. A coating which is no longer sound must be removed and the wood beneath it must be sand-ed down until the greyed areas are no longer visible. A sound old coating only has to be sanded down slightly. On the clean, dry sound substrate, the maintenance coat can take place with the right mounting products in the brushing process.

ST 860

RUBBOL® WP 105

CETOL® WP 510

Other productsMounting products





White 1 l 6 × 1 l = 6 l


Sikkens standardcolours,Joinery Colour Classics.Further colour shadesavailable upon request.

Base TC: 1 l

6 × 1 l = 6 l

Liquid additive for the manufacture of a brushable translucent coating maintenance set made from water borne spray products. Only used for the repair of small damaged areas (spot repair).

Water-soluble

Application: Mix ratio 1:10; addition of the additive for a spray product at a ratio of 1 part ST 860 to 10 parts opaque/translucent coating. Good mixing of the mixture. Processing by brushing.

Fields of application: For the repair of small damages to newly final coated wooden windows, which occurred during transport or installation (not suitable for renovation of weathered surfaces).

White primer with isolating properties for the maintenance of wooden parts,exterior and interior.

Water-soluble

Binder type: Acrylic-alkyd resin

Application: Brush

Fields of application: stable wooden components

Translucent primer for the maintenance of wooden parts, exterior and interior.

Water-soluble

Binder type: Acrylic copolymer

Application: Brush

Fields of application: stable wooden components

Sikkens Wood Coatings enhancement products – because maintained wood lasts longer.Professional installation and regular cleaning and maintenance are essential in order for your customers to enjoy long-term pleasure from your windows and house doors. This also allows the renovation intervals to be extended.

42 43

CETOL® WF 905

CETOL® WF 910

CETOL® WF 915

RUBBOL® WF 310

RUBBOL® WF 318




Sikkens standardcolours,Joinery Colour Classics.Other colour shades on request.

Base TC: 1 l

6 × 1 l = 6 l



Base TC: 1 l

6 × 1 l = 6 l



Base TC: 1 l

6 × 1 l = 6 l

Matt, translucent mid and top coat for the maintenance of wooden parts, exterior and interior.

Water-soluble

Type of binder: Pure acrylic emulsion

Application: Brush


Semi matt, translucent mid and top coat for the maintenance of wooden parts, exterior and interior.

Water-soluble


Application: Brush


Satin-gloss, translucent mid and top coat for the maintenance of wooden parts, exterior and interior.

Water-soluble


Application: Brush




1 l 6 × 1 l = 6 l


Base W05:1l

6 × 1 l = 6 l

Base N00:0.98 l

6 × 0.98 l = 5.88 l



1 l 6 × 1 l = 6 l

Semi matt, opaque mid and top coat for the maintenance of wooden parts, exterior and interior.

Water-soluble


Application: Brush


Satin-gloss, opaque mid and top coat for the maintenance of wooden parts, exterior and interior.

Water-soluble


Application: Brush


Pro tip If wooden parts are accidentally damaged during installation, you can remedy small damages with our matching brushing products, specified for lustre and colour shade. Applying a maintenance coat is quite simple: Clean the damaged, old coating layer and sand gently with sandpaper (200- 220 grit). Then brush the coating of the sanded substrate once or twice in the desired colour shade. The matching quality product can be found on the table below.

Top coat, industrial initial coating Matching protection Matching repair coating

RUBBOL® WF 382/RUBBOL® WF 380 RUBBOL® WP 105 RUBBOL® WF 310

RUBBOL® WF 387/RUBBOL® WF 378 RUBBOL® WP 105 RUBBOL® WF 318

CETOL® WF 952/CETOL® WF 950 CETOL® WP 510 CETOL® WF 910

CETOL® WF 957/CETOL® WF 955 CETOL® WP 510 CETOL® WF 915

CETOL® WF 980 CETOL® WP 510 CETOL® WF 905

Intro

duct

ion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

4544

Products which make work easier For the better and cleaner processing of our opaque and translucent coats and for the cleaning of dirty tools, we are introducing a line of additional products to our range: • Thinning agent• Detergent• Thickener • Matting agent for gloss adjustment of top coats• Defoamer

Matching products for minimisation of foaming tendenciesThis allows foaming in waterborne products to be combated during processing such as dipping and flow coating.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

ST 825

ST 830


Colourless 5 l 25 l

1 × 5 l = 5 l 1 × 25 l = 25 l



Thinning for solventborne products, also suitable for the cleaning of tools.

Transportation tip: UN no.: 1263Colour accessories

ADR: Cl. 3, III

Detergent in the use of water-soluble products for dirty tools such as spraying devices, hoses, pistols, injectors, plank painting machines, for rinsing flow installations. For the removal of dried remnants of paint and splashes.

Other productsAdditional products


46 47

Sikkens Wood Coatings products

RUBBOL®

WP 194 RUBBOL®

WM 274CETOL®

WV 885 BPD+

CETOL®

WP 562BPD

CETOL®

WP 567BPD

CETOL®

WP 560CETOL®

WP 566CETOL®

WM 665CETOL®

WM 675Defoamer WV 888 • •

Defoamer WV 890 • • • • • •

Defoamer WV 891 •

WV 888

WV 890

WV 891

WV 820

WV 830

WV 850


Colourless 0.5 l 3 × 0.5 l = 1.5 l


Yellow 0.5 l 2 × 0.5 l = 1 l


Colourless 1 kg (0.92 l) 6 × 0.92 l = 5.52 l

Waterborne thickener for water borne coatings.

Waterborne matting agent for gloss adjustment of top coats.




Milky white 5 l 1 × 5 l = 5 l


Milky white 5 l 1 × 5 l = 5 l

Defoamer for water borne opaque coats. For the prevention of foam formation during processing such as dipping and flow coating.

Added amount: 0.1–0.3 % weight

Defoamer for water borne translucent coats. For the prevention of foam formation during processing such as dipping and flow coating.

Added amount: 0.05-0.3 % weight

Defoamer for CETOL® WM 675. For the preventon of foam formation during processing such as dipping and flow coating.

Added amount: 0.1-0.5 % weight

Wetting agent for RUBBOL® WF 373 and CETOL® WF 973.

Added amount: 2 %



Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

48 49

Innovative technologiesBecause good isn’t good enough for us

Mobile AppWith the free app for professional wood protection, you can find important information for you as a workman or specialist dealer on innovative coating systems by Sikkens Wood Coatings directly on your iPad. Simply go to www.sikkens-wood-coatings.com and install with one click.

Or, to visit our website, simply scan the QR code to load the app.

Application levelsTypical examples of wooden parts

Recommended dry coat covers

StableDimensional change only allowed in very limited circumstances

Windows, outer doors, conservatories

min. 80 μm translucent,min. 100 μm opaque,but not more than 150 μm.We recommend 100 μm each.

Semi stableDimensional changes permitted in limited circumstances

Cladding with fluted and groove profile, parts in the prefabricat-ed section, stud frame, glue-laminate, framework, match-boards, bargeboards, roof beams, rafters, exclusive garden houses and cottages, high-qual-ity garden wood, wood-based panels

Approx. 60–80 μm

NonstableDimensional change not limited

Overlapping boardings, simple garden wood, fences, terraces, pergolas, carports, blind sys-tems, toys, garden furniture, sheds, sties

In film-forming systems approx. 40–60 μm

In non-film-forming systems no measurable coat

Best examples for this are the Ion-Lock and Duraflex-Technology. With Ion-Lock-Technology, Sikkens Wood Coatings has found a way to bind wooden extracts and therefore to considerably re-duce the previously unwanted discolourations of the wood. New standards in the isolating of opaque and translucent wooden window coating systems are being set.

Duraflex-Technology stands for extremely long du-rability of the coating on windows and doors made from wood. The targeted combination of a perma-nently elastic film and a very high-quality UV light protection means influencing factors such as ex-treme cold or high temperatures and the swelling and shrinking of the wood due to moisture to be ideally compensated.

Wood has outstanding physical properties. These include pressure resistance, elasticity and good insulation. To ensure the quality of the wood remains permanently high, the coating is significant. Over the following pages, we would like to give you a few tips and show you opportunities how you can effectively process your wooden parts.

It is our aim to continuously improve products and, furthermore, to realise ideas and devel-opments which optimise the protection of wooden parts even further. New technologies have been developed in our laboratories which meet the highest of requirements and which give dimensionally stable longer lives even under the hardest of conditions.

We introduce our newest technologies and de-scribe the usefulness of permanent wood protec-tion offered to you and your customers. This is the case for both our standard and premium systems.

At the same time, we are entering the world of colours. High-quality, coated wooden parts be-come an attractive stylistic element thanks to our high-class colour program.

See how efficient wooden parts can be in combi-nation with other materials and benefit from our tips for processing and product use. The table to the side gives processing recommendations for dimensionally stable, semi-stable and non-stable wooden parts.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Quality, functionality, appear-ance – use wood optimally

50 51

Ion-Lock-TechnologyMore protection against visible discolouration

Duraflex-TechnologyElasticity for high weather resistance

In opaque and translucent

1. Attractive force: Traditional binder structures cannot completely bind the liberated wood extractives within the isolation layer. ILT uses an electro-chemical process to bind the ion groups in the liberated wood extrac-tives within the film, thus preventing a bleeding through to the surface.

2. Fixation: The timber extractives are permanently bound during fixation.

High isolation power with no heavy metals 33199

At a glance

• Long term elasticity particularly needed in case of temperature and moisture fluctuations

• Extreme resistance to impact of weathering

• Very good bonding

• Optimum durability

• Ideal customisation for the wood substrate

• High UV protection through innovative light stabilisers

• Long-lasting effectiveness of UV light stabilisers

• Especially effective moisture protection through the film’s outstanding permeable proper-ties

• Good impact strength against cracking

See our products on pages 29 and 32

A breakthrough in the isolation of wooden extractives has been achieved by Sikkens Wood Coatings with Ion-Lock-Technology (ILT). The patent-registered technology offers protection against bleeding. Visible discolourations of translucent or opaque coated surfaces are significantly reduced.

Duraflex-Technology stands for longevity and outstanding weather protection. With the permanent elasticity of the coating system, an optimum durability is achieved in all weathering conditions. A convincing argument for your customers.

The innovative mid-coats CETOL® WM 675 and CETOL® WM 680 not only reduce discolourations effectively, but they also increase the weather-re-sistance of the entire coating system thanks to good pore wetting and filling. Can be applied on most leaf and pine woods. Due to the heavy met-als not being used use an environmentally friend-ly, sustainable product in CETOL® WM 675 and CETOL® WM 680.

This is how Ion-Lock-Technology works:The contrasts between the mostly negatively (–) charged wood extractives and the positively (+) charged components of the binder are used for the high isolating effect. Dyes are drawn to the ion ends and are thus permanently bound and neutralised within the coating layer (see graphic below). This can reduce or even prevent wooden extractive bleed considerably. This is particularly the case for oak wood.

Thanks to the long term elasticity of the film – par-ticularly needed in the case of temperature fluctua-tions – the product is optimally suited to the wood-en substrate. Innovative light stabilisers (in the translucent coatings) give the coating high and long-lasting protection against against UV radia-tion. The outstanding permeable properties of the

Various negatively charged wood extractives

Binder with positive ion groups

Positively charged objects of the binder

Traditional stains

Duraflex coating

Wood

Heat: The wood releases its moisture and shrinks. The coating follows the movement without material stress.

Rain: The ingressing moisture makes the wood swell. But the flexible coating ex-pands and ensures a con-trolled release of moisture thanks to its special diffu-sion characteristics.

Hail: Better impact strength reduces cracking.

Extreme sun: The UV light is absorbed by the coating. Wood and coating remain undamaged.

Frost and snow: Even at low temperatures the coating remains elastic and ensures that diffusion is possible for a regulated moisture equilibrium.

film ensure an especially good moisture balance in the wood. Thanks to these properties the Duraflex coating system achieves an extremely high weath-er resistance.

This was also proven by weathering tests at the Q-Lab Weathering Research Service. In addition, the Fraunhofer Wilhelm-Klauditz-Institut für Holz-forschung (WKI) has confirmed the very high elas-ticity of the coating. Further benefits are the very good bonding and impact strength against cracks.

For opaque and translucent coating systemsSikkens Wood Coatings offers a complete system for both opaque and translucent coatings with the innovative Duraflex-Technology: The products can be used as mid and top coats.

Characteristics that impress

At a glance

• Effective protection against wooden extractive bleed-through, especially for oak

• Good pore wetting and pore-filling increases outdoor durability of the whole coating system

• Environmentally safe, sustain-able product without any heavy metals

• Application on most leaf and pine woods

See our products on page 27

Oak with Ion-Lock-TechnologyOak without Ion-Lock-Technology

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

All products with Duraflex-Technology have the SKH-KOMO product certificate 33199 accord-ing to external tests by the SKH Institute in the Netherlands

Isol

atin

g m

id c

oat w

ith IL

TW

ood

subs

trat

e

1.

2.

For dip-ping/flow coating and spraying

52 53

CETOL®

The product program for wood protection with system

CETOL®

System recommendations for timber species

We offer you a top-class, translucent coating system for dimensionally stable wooden parts with products from the CETOL® range. As translucent coating systems, CETOL® products are available for impregnation, impregnating primer, mid or top coats. In any case, you will achieve top-class results for effective wood protection with our premium products either based on Ion-Lock or Duraflex-Technology.

All coating systems

Premium coating systems

Impregnation

CETOL® WV 885 BPD+

impregnating primer

CETOL® WP 560

CETOL® WP 566 CETOL® WP 566

CETOL® WP 562 BPD

CETOL® WP 567 BPD

CETOL® SP 520

Cross-grain protection/V-joint seal

Kodrin WV 456

Kodrin WV 457

Kodrin WV 472

Mid coat

CETOL® WM 665

CETOL® WM 675 CETOL® WM 675

CETOL® WM 610


CETOL® WF 748

CETOL® WF 758

CETOL® WF 980

CETOL® WF 950

CETOL® WF 952 CETOL® WF 952

CETOL® WF 955



Top coat

CETOL® WF 748

CETOL® WF 758

CETOL® WF 980

CETOL® WF 950


CETOL® WF 955



A mid coat improves the pore-filling and reduces blis-tering, e. g. CETOL® WM 665 or CETOL® WM 610.

CETOL® WM 675 or CETOL® WM 680 also isolate discolouring extractives.

For isolating the discolouring extractives, use solvent-borne primer where possible with CETOL® SP 520. This is also valid for timber species such as afrormosia, afze-lia, framiré, iroko, merbau, padouk, sapupira, sipo.

The sugary substances of the wood are isolated with CETOL® WM 675 or CETOL® WM 680.

Here a primer as protection against blue stain is useful. For mid and top coats, Duraflex-Technology with products such as CETOL® WF 952 or CETOL® WF 957 are recommended.

Wood type

Tamarack

Meranti

Oak

Teak

Coating tip for CETOL® products

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Modified timber species, e.g. accoyaIon-Lock-Technology

Duraflex-Technology

Specially for doors and wood-aluminum windows

54 55

Tamarack

Meranti

Oak

Teak

Modified timber species, e.g. accoya

RUBBOL®

With systems for optimum, opaque coatings

RUBBOL®

System recommendations for timber species

With products from the RUBBOL® series we offer you opaque coating systems for dimensionally stable wooden parts. They were developed for impregnation, mid and top coating and are also available for an optimum use of Duraflex-Technology. They provide a significant contribution towards a longer life cycle of wooden parts.

A mid coat improves the pore-filling and reduces blis-tering, e. g. CETOL® WM 665 or CETOL® WM 610.

RUBBOL® WM 270 also isolates discolouring extractives.

For isolating the discoloured inhabitors, use solvent-borne primer where possible with RUBBOL® SP 110. This is also valid for timber species such as afrormo-sia, afzelia, framiré, iroko, merbau, padouk, sapupira, sipo.

The sugary substances of the wood are isolated with CETOL® WM 675 or CETOL® WM 680. RUBBOL® WM 270 cannot be used as it can tear due to the inhabitors.

Here a primer as protection against blue stain is use-ful. For mid and top coats, use Duraflex-Technology such as RUBBOL® WF 382 or RUBBOL® WF 387.

Coating tip for RUBBOL® productsAll coating systems

Premium coating systems

Impregnation

CETOL® WV 885 BPD+

impregnating primer

CETOL® WP 566

CETOL® WP 562 BPD

RUBBOL® WP 193 RUBBOL® WP 193

RUBBOL® WP 194 RUBBOL® WP 194

RUBBOL® WP 151

RUBBOL® SP 110

Cross-grain protection/V-joint seal

Kodrin WV 456

Kodrin WV 457

Kodrin WV 458

Kodrin WV 470

Kodrin WV 472

Mid coat


RUBBOL® WM 274


RUBBOL® WM 270 RUBBOL® WM 270

RUBBOL® WF 380

RUBBOL® WF 382 RUBBOL® WF 382

RUBBOL® WF 378


RUBBOL® WF 375


Top coat

RUBBOL® WF 380


RUBBOL® WF 378


RUBBOL® WF 375


Ion-Lock-Technology

Duraflex-Technology

Specially for doors and wood-aluminum windows

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Wood type

56 57

For the most beautiful calling card of your house:

Coating in Sikkens Wood Coatings House door system

The perfect combination of long life and nature:

Wood-aluminum window system

Modern architecture, but also the trend for the passive use of solar energy and for low-en-ergy houses, means a constant increase in demand for large-area windows. Wooden-alu-minum windows make it possible and also offer significant benefits: High inherent stability, very good insulation and a variety of different designs. Furthermore, they are easy to main-tain and very durable. Sikkens Wood Coatings has the optimum coating for window protec-tion and an attractive offer for a colourful design.

House doors are both entry ports and calling cards – a welcome message for inhabitants and guests. The Sikkens Wood Coatings house door system is especially aligned to the many demands of entrance doors. The high-quality coating underlines the individual character, permanently protects the house door and gives it an attractive appearance.

RUBBOL® WP 151 – the new 2-component primer for opaque-coated house doors made from MDF or solid woodRUBBOL® WP 151 also ensures a standardised white base coat for complicated house doors. Special feature: The primer anchors itself in the substrate and prevents swelling of the MDF due to moisture. The extractives are well-isolated thanks to the reaction of the two components. The appli-cation is easy to carry out. The packaging content is prepared in such a way that you can create an ideal mix ratio of primer and hardener. After mix-ing, the primer can be immediately used.

Please note: For a good reaction of the compo-nents, the drying temperature should not be below 20 °C. High temperatures, ideally 25–30 °C, en-sures a better wetting between the components and therefore strengthen the isolation and bond-ing ability. The primer can be easily sanded after approx. 8 hours. Sanding should – particularly if the overcoating is only to take place on the follow-ing day – occur just before the subsequent coat-ing in order to achieve good intercoat adhesion. The overcoating with waterborne coatings can oc-cur without intermediate sanding after just two hours.

RUBBOL® WF 373 and CETOL® WF 973 as well as WV 850 wetting agent as coating for house doorsWe offer finish coats RUBBOL® WF 373 and CETOL® WF 973 for the necessary protection of the door surface. The formulations include PU components and are reinforced by the addition of wetting agents. Another advantage of the products is that they have a practical pot life of 24 hours after mixing. This means the mixed product from the previous day can be used for the second spraying, even when drying overnight.

Wood and aluminum are a strong team: Wood not only takes on the static function, but also emits a good feeling of contentment as a natural building material. Aluminum offers protec-tion against weathering influences, which guaran-tees constant consistency. Wooden-aluminum windows therefore reach the highest level of safe-ty against climate conditions and also effective fire protection as they are able to withstand fire for a longer period.

High stability and long durabilityThe effective protection by aluminum strengthens the consistency of the wood and therefore leads to an especially long service life of wood-alumi-

num windows. But there are even more benefits: Thanks to the clear separation of materials and functions, the varying dilation behavior, even with major shifts in temperature, does not present any connection problems. On the contrary: As wood has practically no reaction to temperature differ-ences in terms of dimensioning, grooves are not a problem.

In addition, wooden-aluminum windows offer cre-ative freedoms unlike any other material combina-tion. With the innovative CETOL® translucent coats and the brilliant RUBBOL® opaque coats, perfect surface protection is ensured and a harmonious, precisely aligned colour design is made possible.

Practical tips: After adding 2 % WV 850 to the desired finish coat, the mixture can be immediately processed. We rec-ommend painting the coating with max. 150 μm wet layer thickness. In bright colour shades or transpar-ent CETOL® WF 973 the mixed product is used as a mid and top coat.

Transparent Opaque

Soft woodand meranti

Other tropical and hard woods

Soft woodand meranti

Other tropical and hard woods

Impregnation CETOL® WP 562 BPD CETOL® WP 562 BPD

Primer CETOL® WP 566 CETOL® WP 566 RUBBOL® WP 194 RUBBOL® WP 194

Mid coat

CETOL® WM 665CETOL® WM 675CETOL® WM 680CETOL® WM 610

CETOL® WM 675CETOL® WM 680

RUBBOL® WM 270**RUBBOL® WF 378RUBBOL® WF 380

RUBBOL® WM 270

Top coat

CETOL® WF 973CETOL® WF 950CETOL® WF 955CETOL® WF 980

CETOL® WF 973CETOL® WF 950CETOL® WF 955CETOL® WF 980

RUBBOL® WF 373RUBBOL® WF 375RUBBOL® WF 378RUBBOL® WF 380

RUBBOL® WF 373RUBBOL® WF 375RUBBOL® WF 378RUBBOL® WF 380

* The coating systems listed here are examples. Please note the respective technical data sheets and request a system consultation from a Sikkens Wood Coatings sales employee or at the factory.

** For larch we recommend CETOL® WM 675/WM 680 instead of RUBBOL® WM 270 as a mid coat.

Example coating systems for wood-aluminum*

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

58 59

Joinery Colour Classics:

Quality in colour

Joinery Colour Classics – International SelectionWe have put together Europe’s most attractive and requested colour shades into the Joinery Colour Classics (JCC), a truly comprehensive collection. This opens up new and varied design opportunities – with high-quality translucent coats.

Joinery Colour Classics, translucently (transparently) applied to the meranti tim-ber species.

The colours listed here may vary. Deviations are due to printing processes. CETOL® WP 562 BPD and 567 BPD are not available in all colour shades. Details can be found online at www.sikkens-wood-coatings.com

Joinery Colour Classics, translucently (transparently) applied to the spruce tim-ber species.

The trend toward more colour is unmistakable. More than a third of all components are now being colour-coated – regardless of whether translucent or opaque. Customer desires are becoming more individual. Clients increasingly want to have more creative freedom in design. Show you colours, allow yourself and your customers to be convinced by the attractiveness of wooden windows.

Never Ending Impressions translucently (transparently) applied to the spruce timber species.

Never Ending ImpressionsTop-class wood protection and a fascinatingly beautiful colour collection are the trademarks of our special translucent coating CETOL® WF 771 (see page 36). Enchanting colour shades of muted to vivid expressiveness are in the colour collection

‘Never Ending Impressions’ harmoniously com-bined with one another. This leaves more room for creative freedom and the implementation of the very personal taste in colour of your customers.

CETOL® colour collection:

fascinating colour spectrum (translucent)

Intro

duct

ion

impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Walnut J914TRich mahogany J845TSycamore J285TIpé J280TCherry mahogany J275T

Wengé J265TSapelli J255TDouka J245TBilinga J235TTeak J085T

Pine J077TOld Pine J073TOlive Green J065TRosewood J048TMahogany J045T

Douglas fir J043TNut tree J010TDark Oak J009TBrown J007TLight Oak J006T

Walnut J914TRich mahogany J845TSycamore J285TIpé J280TCherry mahogany J275T

Wengé J265TSapelli J255TDouka J245TBilinga J235TTeak J085T

Pine J077TOld Pine J073TOlive Green J065TRosewood J048TMahogany J045T

Douglas fir J043TNut tree J010TDark Oak J009TBrown J007TLight Oak J006T

Gold Satin Ginger Apricot RockSavanna

Royal Red Petrol Blue Smaragd Green Purper

Mineral Grey Concrete Grey Almond Café Latte Fine Clay

Khaki Light Tundra Natural Wool Raw Mountain Ochre

Pumpkin Light Coral Charcoal Dark Night Chestnut

Wengé Sandstone Morning Mist Greige Green Hill

Sea Green Urban Blue Lavender Ultramarine Blue Shadow

Pure Taupe Graphite Sepia Indigo Rich Saffron

Cinnamon Red Earth Mystic Purple Forest Green Sienna

60 61

RUBBOL® CollectionDiscover the almost unlimited possibilities of colourful design for opaque coating systems. The ‘RUBBOL® Collection’ colour collection stands for the great coluor competence of the Sikkens Wood Coatings brand. It presents the 20 preferred top shades in Europe along with the RAL colour shades. All optimally aligned to your wooden win-dows. But colours from other collections can also be easily realised with RUBBOL® products.

Colour cardsThe copious range of colour cards includes 213 RAL colour shades, shows a comparison of various gloss grades and special metallic colours. These makes the cards a valuable decision-making aide to customer advice.

RUBBOL® colour collection:

Huge range of colours for opaque coating systemsColour mix system:

The perfect colour in no time at all

Enormous variety of colour shadesWith our colour collection ‘Joinery Colour Clas-sics’ as well as Cetol® and Rubbol® we present collections to you in an unusually wide palette of highly current colours.

Furthermore, thanks to its large colour space, the colour mix system offers an almost unlimited range of possibilities. Furthermore, it includes all standard and international colour shade collec-tions.

The technology of the colour mix system meets the VOC regulation 2010 – and therefore fulfils the strictest of environmental standards. The mix machine can be easily operated and also offers a design according to the latest ergonomic findings.

And the best thing is: If you have a mixing machine yourself, then you will receive all the necessary updates from us. This means you are always up to date.

Sikkens Wood Coatings has one of the most modern mix systems in Europe. With our intel-ligent technology of the colour mix system we achieve the best colour results. With state-of-the-art mixing machine technology, all water-based Sikkens Wood Coatings product sys-tems, opaque and translucent coats can be mixed by machine. With outstanding quality and in the shortest space of time.

Harbil HA/450/20 mixing machine

Acomix pigment pastesSpecial primer pastes developed for use of bond-ing products. The following colour shades can be delivered:wB1, wB3, wG1, wO3, wR1, wR2, wR5, wTR, wTY, wV1, wV2, wW1, wY1, wY2, wY3, wZ1 und wJW, wJR, wJY, wJZ

Packsize:1 l

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

62 63

Know-how:

Maintenance and disinfection of flow coaters and dip tanks

Know-how:

Tips for top surfaces

Not only high-quality products are required for a perfect surface coating. Professional processing is equally as important: Everything from a flawless base to the correct spray system, right up to appropriate application onto the wooden element.

Our recommendations for professional processing:

Nozzle selection for paint and varnish• Size: 0.28 mm (0.011 inch) or 0.33 mm

(0.013 inch); spray angle: 20° for frames and leaf parts, 40°-50° for doors and flat wood structures

• The service life of a spray nozzle depends on the material being sprayed and the spray pressure (which must be checked regularly)

• The spray nozzle should never be cleaned with sharp-edged objects (e. g. knife, screw-driver, etc)

• Material filters on the spray pistol and the pump must be inspected regularly and replaced as necessary

• Shorter drying periods can be attained with a multiple coat system

Pump adjustment• Material pressure: Opaque + translucent

products 80-100 bar Double membrane pump The setting can be read from the pressure gauge Reciprocating pump Material pressure depends on the transmission ratio (consult the spray equipment manufacturer)

• Atomiser pressure for double membrane and reciprocating pumps Opaque + varnish 0.5 to about 1.2 bar (Esta system, max. 1.5 bar)

• Only the absolute minimum of atomiser air, as necessary, should be used. This can be pre-tested on the basis of spray tests on cardboard (streak-free, homogeneous, atomised spray pattern).

For automatic spray processes (e.g. Esta system)• Processing in a 1-coat system

(up to 350 μm wet)• Machine coating guarantees even material

application and thus flawless surfaces

For manual spray processes • Processing in a 2-coat system

(2 × 150–200 μm wet)• Avoids defect locations in the coating surface• Certain coat thickness even in problem areas• Smooth, evenly spread surfaces

Flow coaters and dip tanks should be regularly maintained and disinfected in order to attain a good coating result and in order to avoid bacterial attacks and the resulting unpleasant odor. This is ideally done with simple, daily measures.

Before starting work and during flow coating, check the viscosity several times a day with a DIN-4 or ISO-3 cup – the processing times are given in the corresponding technical data sheet. For thinning, please only use clean tap water. Clean and dry all equipment for applying, thinning or decanting immediately after use with clear wa-ter. When flow coating it should be ensured that all nozzles are open and the filter is clean.

We recommend emptying the flow coater after finishing and to clean with fresh water and to al-ways cover the dip tank when it is not in use.

The disinfection of flow coaters and dip tanks should occur as a preventative measure. Longer breaks in operation such as plant holidays or Christmas holidays are ideal for this. Disinfection is necessary if the coating material develops a pu-trid smell.

It is important to drain the coating material and to dispose of putrid smelling material – under no circumstances should be it be re-added after disinfection. A disinfectant such as Lyso 3025 can be used.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

64 65

Know-how:

Use of the spray pistol

An evenly applied surface coating is extremely important for the long-term durability of a wooden component. Exercise of proper spray pistol handling is second only to use of proper spraying equipment.

The benefits of waterborne coating systems compared to solventborne materials are much greater in the surroundings of a paint shop than you might think. Waterborne translucent and opaque coats offer benefits in the conditions of the factory department, the emissions values, the design of filter systems and electrical equipment, danger of explosion and fire and the health of employees.

Know-how:

Processing of waterborneopaque and translucent coatings

Additional painting uses such as avoiding room ventilation, limitation of room temperature control and radical shortening of painting times are often suggested, but without limiting the painting result they cannot be realised in practice. In order to avoid painting errors we would therefore like to make a few suggestions:

1. Removal of moisture and temperature control

The view that because waterborne translucent coats do not have organic thinners means there is no need for ventilation is incorrect. As long as the opaque coating is in the water it cannot harden. It is therefore very important to ensure a good venti-lation of dry rooms.

2. Wet layer thickness The rheology of many dispersion paints allows the application of wet layer thicknesses with a higher amount. Such thick opaque coatings cannot suffi-ciently harden within the normal drying time of 12-18 hours, however, which leads to problems in transportation, working on and de-stacking win-dows. If you want the opaque coating to dry well overnight, then waterborne opaque coating should not be applied more thickly than 150 μm wet.

3. Drying If, simply due to the appearance or because of manual touching for dryness, it is already closed and a second coating is applied after just a few hours, then the first coating can swell due to the water of the second coating and then continue drying with major delay.

4. Seals Sealant and lip seals have to be aligned to the water paint system in order to avoid solvation, discolourations and adhesion to/with the coating.

5. Fittings Fittings and fastenings must be corrosion-resis-tant. The contact pressure between the frame and sash should be equal across the entire unit (sash) and not be too high.

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

1 Nozzle always at a right angle to the surface 2 Spray distance of 20 – 25 cm3 Always operate pistol at an even distance from the surface

1 Tilting the pistol causes a paint ridge to form that will lead to runs and streaks

2 Spray distance too small or too big3 Swinging the pistol (creates varying coat thicknesses)

20 – 25 cm 20 – 25 cm

Incorrect spray pistol handlingCorrect spray pistol handling

1

3 3

12 2

676666 67

Your notes

Intro

duct

ion

Impr

egna

tion/

im

preg

natin

g pr

imer

Prim

erSe

alan

tM

id c

oat

Top

coat

Othe

r pro

duct

sIn

form

atio

n an

d se

rvic

es

Akzo Nobel Industrial Coatings Ltd. Unit 04a, Mercer Way Shadsworth Business Park, BlackburnLancs, BB1 2QZ · United Kingdom Tel. +44 1254 687 950 Fax +44 1254 687 960 [email protected] www.sikkens-wood-coatings.co.uk

Passion for wood

0721

5_25

0713

· 01

465/

09/1

3/LW

/P ·

MSR

P €5

.00

Erro

rs a

nd o

miss

ions

exc

epte

d.

Documents

Catalogue - Pinmar Supply€¦ · Catalogue sikkens wood coatings | c atalogue . Sikkens Wood Coatings is an AkzoNobel brand The content and works created by us on these pages are