catalogue pb stn-19.0.16

HANSU CONTROLS OFF: PLOT W-281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.

TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 WEB SITE:www.hansucontrols.com,E-Mail:[email protected],[email protected]

F/CATALOGUE/P.B STN PAGE 1 OF 76 CAT- HC, HD, HE, HF, HG, HH, HI, HJ, HK, HL, HM, HN, HO, HP, HQ, HR SPECIFICATION AND QUOTATION FOR W.P.CAST ALUMINIUM P.B.STATION

Supply of Cast Aluminium P.B. Station dust, vermin and weatherproof suitable for wall/Structure mounting. All the enclosures are cast out of superior quality Aluminium alloy-LM-6.All the surfaces are carefully cleaned and leveled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth surface. All the mating surfaces are provided with round NEOPRENE rubber gasket in the groove so as to make it effectively dust and vermin proof. Typical enclosures with different types of actuators mounted are tested for IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 . Our P.B. Stn are suitable for outdoor installation without any canopy. MOUNTING: External four lugs are provided for fixing. The lugs offset in such a way that the rear part of the unit stays away from the surface by at least 3mm. FIXING OF ACTUATORS AND ELEMENTS: For wall-mounting P.B. Station all the actuators and elements are fixed on cover and Cover is fixed bolted type and has glass cemented on it in front of the ammeter. Ammeter is mounted inside if provided. Ammeter will be 65MM DIA OR 72x72 or 96x96 square type having 90 scales. Ammeter will have suppressed scale to read starting current. Ammeter will be suitable for one Ampere secondary.CABLE ENTRIES: Threaded cable entries are provided at the bottom unless otherwise specified no gland will be provided. HARDWARE: All external hardware’s used will be Stainless Steel. EXTERNAL CANOPY: Our P.B. Stn. is suitable for outdoors mounting without canopy. We also manufacture IND.WEATHER PROOF P.B Station with Aluminium integral canopy.EARTHING: Earthing is provided on both sides of the enclosures by 5mm screw with two plain washers and spring washer of brass. NAME PLATE: Each P.B. Station will be provided with nameplate giving equipment description. INSPECTION & TESTING: Each P.B. Station will be subjected to routine tests in accordance with relevant Indian Standards-IS-8623-1,1993 AND NEW STANDARD FOR FACTORY BUILT ASSEBLIES-IS/IEC61439 & including the following:(1) Dimensional check as per drawing. (2) Operation test.(3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60 Seconds.(5) Earth continuity test. SALIENT FEATURES OF `HANSU' P.B.STATIONS: (a) Each P.B Stn. is in Cast Aluminium enclosure & epoxy powder coated.(b) Actuator/Elements are TEKNIC/ SIEMENS make which are known for quality and reliability. Even spares are available freely anywhere in India.(c) Better than IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001.(d) Non deteriorating Neoprene sponge rubber gasket.

SPECIFIC REQUIREMENTS FOR CAST ALUMINIUM P.B.STATIONS CODE DRAWING DESCRIPTION HC05

TYPE: HC05 QTY: NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Stop P.B. Station with canopy on cover & without terminals, with 1no.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE ENCLOSURE CAST OUT OF ALUMINIUM ALLOY LM-6

FRONT VIEW

TOP/ BOTTOM VIEW

SIDE VIEW OPEN VIEW

F/CATALOGUE-P.B STN PAGE 2 OF 76 SPECIFIC REQUIREMENTS FOR CAST ALUMINIUM P.B.STATIONS

CODE DRAWING DESCRIPTION HC06


Design, Manufacturing & Supply of Cast Aluminium (LM-6) Stop P.B. Station without canopy & without terminals, with 1no.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given).EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING.IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE ENCLOSURE CAST OUT OF ALUMINIUM ALLOY LM-6

FRONT VIEW

TOP / BOTTOM VIEW SIDE VIEW

OPEN VIEW

HC09


Design, Manufacturing & Supply of Cast Aluminium (LM-6) Stop P.B. Station without canopy & with 1no.shrouded red spring return actuator with NC contact for stop wired up to 2:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. External legs are provided for wall/structure mounting. MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make.(Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE ENCLOSURE MAX.6 TERMINALS CAN BE PROVIDED. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

FRONT VIEW

TOP/ BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HC17

TYPE: HC17 QTY: NOTE:IMAGES, DRAWING & WIRING DIAGRAM ARE TYPICAL& ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX.6 TERMINALS CAN BE PROVIDED

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Stop P.B. Station with canopy covering top side,left side and right side & with 1no.shrouded red spring return actuator with NC contact for stop wired up to 2:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE



FRONT VIEW-HC17

BOTTOM VIEW-HC17 SIDE VIEW-HC17

OPEN VIEW-HC17

CODE DRAWING DESCRIPTION HD01

TYPE: HD01 QTY: NOTE: IMAGES, DRAWING AND

WIRING DIAGRAM ARE TYPICAL AND ACTUAL

PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop (mounted vertically) P.B. Station without canopy & without terminals, with 1no.shrouded green spring return actuator with NO contact for Start & 1no.M.Red stayput actuator with NC contact for Stop. Cable termination directly on cover mounted element. External legs are provided for wall / structure mounting. 2:3/4" cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE .MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW SIDE VIEW

HD04

TYPE: HD04 QTY: NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop (mounted HORIZONTALLY) P.B. Station without canopy & without terminals, with 1no.shrouded green spring return actuator with NO contact for Start & 1no.M.Red stayput actuator with NC contact for Stop. Cable termination directly on cover mounted element. External legs are provided for wall / structure mounting. 2:3/4" cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE ENCLOSURE CAST OUT OF ALUMINIUM ALLOY LM-6 TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

FRONT VIEW

TOP / BOTTOM VIEW SIDE VIEW SIDE VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021 WEB SITE:www.hansucontrols.com,E-Mail:[email protected],[email protected]



MAX. 6 WIRES AND TEMINALS CAN BE PRROVIDED

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station without canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 3:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given). THICKNESS OF ENCLOSURE 3-4MM IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HD14 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD16

IN THIS LCS TYPE HD16 UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 3:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION .

FRONT VIEW

BOTTOM VIEW

SIDE VIEW OPEN VIEW



IN THIS LCS TYPE HD18 UPTO 2NO+2NC

CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS

CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 3:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/ BOTTOM VIEW SIDE VIEW

OPEN VIEW

HD35

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 3:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR.MAX. 6 WIRES AND TEMINALS CAN BE PRROVIDED

FRONT VIEW

BOTTOM / TOP VIEW

SIDE VIEW

OPEN VIEW




F/CATALOGUE-P.B STN PAGE 6 OF 76 CODE DRAWING DESCRIPTION HD36

TYPE: HD36 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER YOUR SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop (mounted HORIZONTALLY) P.B. Station with canopy OVER COVER & without terminals, with 1no.shrouded green spring return actuator with NO contact for Start & 1no.M.Red stayput actuator with NC contact for Stop. Cable termination directly on cover mounted element. External legs are provided for wall / structure mounting. 2:3/4" cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD41

MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDED AND WITH MAX 20 TERMINALS CAN BE PROVIDED.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) PB Station with Integral canopy & with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, wired up to 3:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE MAX 4 CABLE ENTRIES ¾” OR 1” CAN BE PROVIDED. TYPE: HD41 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

BOTTOM / TOP VIEW

SIDE VIEW

OPEN VIEW



MAX. 4 POLE T-N-C SWITCH CAN BE

PROVIDED AND WITH MAX 20 TERMINALS CAN BE PROVIDED.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) PB Station withut any canpy but with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, wired up to 3:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HD42 MAX 4 CABLE ENTRIES ¾” OR 1” CAN BE PROVIDED NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HE08

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION . SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE . TYPE: HE08 IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.

FRONT VIEW

TOP/BOTTOM VIEW SIDE VIEW OPEN VIEW

F/CATALOGUE-P.B STN PAGE 8 OF 76

CODE DRAWING DESCRIPTION HE09

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL

PRODUCT WILL BE AS PER ABOVE SPECIFICATION . TYPE: HE09

SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station withut any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW OPEN VIEW

HF11

Manufacture and supply of Cast Aluminium IND. WP Starter with 3 pole MCB OR 3 POLE ON OFF SWITCH, CONTACTOR,O.L. RELAY AND START/STOP PB,wired up to 7:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make.CONTACTORS AND RELAYS WILL BE L& T MAKE.IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HF11 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW



CODE DRAWING DESCRIPTION HG05

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATIONTYPE: HG05

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with Ammeter without canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HG12

NOTE: IMAGES, DRAWING AND

WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATIONTYPE: HG12

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW



Design, Manufacturing & Supply of Cast Aluminium (LM-6) PB Station without any canopy but with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg MISC Ammeter will be provided.wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make.AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HG13 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDED

FRONT VIEW

TOP / BOTTOM VIEW SIDE VIEW OPEN VIEW

HG14

TYPE: HG14

Design, Manufacturing & Supply of Cast Aluminium (LM-6) PB Station with integral canopy AND with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg MISC Ammeter will be provided.wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make.AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDED

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW OPEN VIEW



CODE DRAWING DESCRIPTION HH05

TYPE: HH05 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HH06

TYPE: HH06 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HANSU CONTROLS F/CATALOGUE-P.B STN PAGE 12 OF 76

CODE DRAWING DESCRIPTION HI01

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HI01

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with Ammeter without canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HI08

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HI08

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE.IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


F/CATALOGUE-P.B STN PAGE 13 OF 76 CODE DRAWING DESCRIPTION HJ02

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HJ02

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HJ06

NOTE: IMAGES, DRAWING & WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.UPTO 2POLE 2WAY WITH OR WITHOUT OFF SELECTOR SW.ITEM CODE HJ06

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

F/CATALOGUE-P.B STN PAGE 14 OF 76 CODE DRAWING DESCRIPTION HK02

TYPE: HK02 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop (mounted vertically) P.B. Station without canopy & without terminals, with 2nos.shrouded yellow/black spring return actuator with NO contact for for/rev & 1no.M.Red stayput actuator with NC contact for Stop. Cable termination directly on cover mounted element. External legs are provided for wall / structure mounting. 2:3/4" cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE .MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

FRONT VIEW

HK03

UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB & UPTO 20 TERMINALS CAN BE PROVIDED

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station without canopy with 1no.shrouded green spring return actuator with NO contact for for/re, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given). THICKNESS OF ENCLOSURE 3-4MM IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HK03 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW





UPTO 2NO+2NC CONTACT

ELEMENTS CAN BE PROVIDED ON EACH PB & UPTO 20 TERMINALS

CAN BE PROVIDED

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station without canopy with 1no.shrouded green spring return actuator with NO contact for for/re, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.)THICKNESS OF ENCLOSURE 3-4MM IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HK11 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HL02

TYPE: HL02 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station with Ammeter without canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW


CODE DRAWING DESCRIPTION HL06


Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAkE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM - TYPE: HL02

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HM02

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION .

Design, Manufacturing & Supply of Cast Aluminium (LM-6) FOR/REV/Stop P.B. Station with INTEGRAL canopy with 1no.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HM02.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HM03

TYPE: HM03 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station withintegral canopy with 1no.shrouded green spring return actuator with NO contact for START, & 1no. M.Red Stayput actuator with NC contact for stop, 1no: 1 Pole 2 Way Local/Remote selector switch, 1no: 10k 10turn potentiometer for speed adjustment and 1no: 72x72 mm RPM meter with 4-20mA input, wired upto 11: 2.5sqmm Connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HM04

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL

AND ACTUAL PRODUCT WILL BE AS PER ABOVE

SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) FOR/REV/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF - TYPE: HM04.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HN02

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS.

TYPE-HN02

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station with Ammeter without canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96x96mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HN07

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96x96mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAkE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. TYPE: HN07

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HO02


AND ACTUAL PRODUCT WILL BE AS PER ABOVE

SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) FOR/REV/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF - TYPE: HO02.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HO04

TYPE: HO04 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station withintegral canopy with 1no.shrouded green spring return actuator with NO contact for START, & 1no. M.Red Stayput actuator with NC contact for stop, 1no: 1 Pole 2 Way Local/Remote selector switch, 1no: 10k 10turn potentiometer for speed adjustment and 1no: 96x96 mm RPM meter with 4-20mA input, wired upto 11: 2.5sqmm Connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HANSU CONTROLS

OFF: PLOT W-281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701. F/CATALOGUE-P.B STN PAGE 20 OF 76

CODE DRAWING DESCRIPTION HQ02

TYPE: HQ02 NOTE: IMAGES, DRAWING ANDWIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Manufacture& Supply of Cast Aluminium (LM-6) 2NOS START/Stop P.B. Station without canopy & without terminals, with 2nos.shrouded green spring return actuator with NO contact for start & 2no.M.Red stayput actuator with NC contact for Stop. Cable termination directly on cover mounted element. External legs are provided for wall / structure mounting. 2:3/4" cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE .MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR

FRONT VIEW


OPEN VIEW

HQ03

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION TYPE: HQ03

Design, Manufacturing & Supply of Cast Aluminium (LM-6) 2NOS Start/Stop P.B. Station without any canopy with 2no.shrouded green spring return actuator with NO contact for start, & 2no. M.Red Stayput actuator with NC contact for stop wired up to 6:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOMVIEW

SIDE VIEW OPEN VIEW

HANSU CONTROLS

OFF: PLOT W-281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701. /CATALOGUE-P.B STN PAGE 21 OF 76


TYPE: HQ04 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station without any canopy with 2nos.shrouded yellow/black spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM SELECTOR SWITCH MAY BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HQ05

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

Design, Manufacturing & Supply of Cast Aluminium (LM-6) 2NOS Start/Stop P.B. Station with integral canopy with 2no.shrouded green spring return actuator with NO contact for start, & 2no. M.Red Stayput actuator with NC contact for stop wired up to 6:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM- TYPE HQ05

FRONT VIEW

TOP/BOTTOM VIEW SIDE VIEW

OPEN VIEW

. /CATALOGUE-P.B STN PAGE 22 OF 76


TYPE: HQ06 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

Design, Manufacturing & Supply of Cast Aluminium (LM-6) for/rev/Stop P.B. Station with integral canopy with 2nos.shrouded yellow/black spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH MAY BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HR02

NOTE: IMAGES, DRAWING & WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICS.

Design, Manufacturing & Supply of Cast Aluminium (LM-6) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for START, & 1no. M.Red Stayput actuator with NC contact for stop, 2nos: N.yellow/black spring return act. With NO contact for increase/decrease,1no 10k 10turn potentiometer for speed adjustment and 1no: 96x96 mm RPM meter with 4-20mA input, wired upto 11: 2.5sqmm Connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. TYPE: HR02

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW



F/CATALOGUE-P.B STN PAGE 23 OF 76 CATEGORY - HC, HD, HE, HF, HG, HH, HI, HJ, HK, HL, HM, HN, HO, HP, HQ, HR

SPECIFICATION AND QUOTATION FOR FRP P.B.STATIONS Supply of FRP P.B.STATIONS dust, vermin and weather proof suitable for Wall/structure Mounting. All the enclosures are hot moulded out of superior quality SMC/DMC compound with 20-30% glass of shade 631 as per IS-5. All the mating surfaces are provided with round neoprene rubber gasket so as to make it effectively dust and vermin proof. Typical enclosures with different types of actuators mounted are tested by many of our customers for confirmation to IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 FIXING OF ACTUATORS AND ELEMENTS: For wall-mounting P.B. Station all the actuators and elements are fixed on cover and Cover is fixed bolted type and has glass cemented on it in front of the ammeter. Ammeter is mounted inside if provided. Ammeter will be 72x72 or 96x96 square type having 90 scales. Ammeter will have suppressed scale to read starting current. Ammeter will be suitable for one Ampere secondary.CABLE ENTRIES: Threaded cable entries are provided at the bottom unless otherwise specified no gland will be provided. HARDWARE: All external hardware’s used will be Stainless Steel. EXTERNAL CANOPY: Our P.B. Stn. is suitable for outdoors mounting without canopy. We also manufacture IND.WEATHER PROOF P.B Station with FRP integral canopy.EARTHING: Earthing is provided on both sides of the enclosures by 5mm screw with two plain washers and spring washer of brass. NAME PLATE: Each P.B. Station will be provided with nameplate giving equipment description. INSPECTION & TESTING: Each P.B. Station will be subjected to routine tests in accordance with relevant Indian Standards-IS-8623-1,1993 AND NEW STANDARD FOR FACTORY BUILT ASSEBLIES-IS/IEC-61439 & including the following:(1) Dimensional check as per drawing. (2) Operation test.(3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60 Seconds.(5) Earth continuity test. SALIENT FEATURES OF `HANSU' P.B.STATIONS:

(a) Each P.B Stn. is in HOT COMPRESSION MOULDED FRP enclosure b) Actuator/Elements are TEKNIC/ SIEMENS make which are known for quality and reliability. Even spares are available freely anywhere in India.(c) Better than IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001.(d) Non deteriorating Neoprene sponge rubber gasket

GRP (GLASS REINORCED POLYSTER) AND FRP(FIBRE GLASS REINORCED POLYSTER) ARE THE SAME

SPECIFIC REQUIREMENTS FOR FRP /POYCARBONATE P.B.STATION CODE DRAWING DESCRIPTION HC13

TYPE: HC13-NEW DESIGN NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED.

Design, Manufacturing & Supply of E.Stop P.B. Station with integral canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP/ POLYCARBONATE ENCLOSURE & with 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 2:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

FRONT VIEW

BOTTOM VIEW SIDE VIEW

OPEN VIEW


SPECIFIC REQUIREMENTS FOR FRP/POLYCARBONATE P.B.STATION CODE DRAWING DESCRIPTION HC16

TYPE: HC16 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION UPTO 2 CONTACTS IN ANY OF NO OR NC COMBINATION CAN BE PROVIDED.

Design, Manufacturing & Supply of E.Stop P.B. Station with integral canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP ENCLOSURE & with 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 2:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE 631 AS PER IS5 THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HC19

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL & ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION UPTO 2 CONTACTS IN ANY OF NO OR NC COMBINATION CAN BE PROVIDED.

Supply of POLY CARBONATE Stop P.B. Station without canopy & without terminals,with 1no.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE - TYPE: HC19

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HC20

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED.

Design, Manufacturing & Supply of E.Stop P.B. Station without any canopy IN FRP/ POLYCARBONATE ENCLOSURE & with 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 2:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HC20

F/CATALOGUE-P.B STN PAGE 25 OF 76 CODE DRAWING DESCRIPTION

FRONT VIEW

TOP – BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD21

TYPE: HD21 NOTE: IMAGES, DRAWING AND WIRING DIA.ARE TYPICAL & ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED,TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

Design, Manufacturing & Supply of start/Stop P.B. Station with integral canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP/ POLYCARBONATE ENCLOSURE & with 1no.shrouded green spring return actuator with NO contact for start, & 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 3:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE

FRONT VIEW

BOTTOM / TOP VIEW

SIDE VIEW OPEN VIEW

HD22

TYPE HD22 NOTE: IMAGES, DRAWING AND WIRING DIA.ARE TYPICAL & ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED,TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

Design, Manufacturing & Supply of start/Stop P.B. Station with integral canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP ENCLOSURE & with 1no.shrouded green spring return actuator with NO contact for start, & 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 3:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE.

FRONT VIEW

BOTTOM / TOP VIEW

SIDE VIEW

OPEN VIEW


TYPE: HD27 NOTE: IMAGES, DRAWING AND WIRING DIA.ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED

Supply of POLY CARBONATE Start/Stop P.B. Station without canopy & without terminals,with 1no shrouded green act. with No contact for start, 1no.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HD28

Type HD28 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED,TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

Design, Manufacturing & Supply of start/Stop P.B. Station without any canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP/ POLYCARBONATE ENCLOSURE & with 1no.shrouded green spring return actuator with NO contact for start, & 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 3:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 6 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW





TYPE: HD29 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE

Design, Manufacturing & Supply of start/Stop P.B. Station with integral canopy COVERING TOP,LEFT AND RIGHT HAND SIDE IN FRP ENCLOSURE & with 1no.shrouded green spring return actuator with NO contact for start, & 1no.M.RED STAYPUT actuator with NC contact for stop wired up to 3:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX. 20 TERMINALS WITH WIRING CAN BE ACCOMODATED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, ENCLOSURE WILL HAVE LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS.COVER FIXING BY SS SCREWS 5MM CAPTIVE

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD39

TYPE: HD39

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) PB Station with Integral canopy & with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, wired up to 3:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX 20 TERMINALS CAN BE PROVIDED TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDED IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE, MAX 4 CABLE ENTRIES ¾” OR 1” CAN BE PROVIDED. NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY.

FRONT VIEW

TOP VIEW

SIDE VIEW OPEN VIEW

HANSU CONTROLS

OFF: PLOT W-281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701. TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021

WEB SITE:www.hansucontrols.com,E-Mail:[email protected],[email protected]

HANSU CONTROLS F/CATALOGUE-P.B STN PAGE 28 OF 76


TYPE: HD40

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) PB Station without any canopy & with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, wired up to 3:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. MAX 20 TERMINALS CAN BE PROVIDED TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDED IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE, MAX 4 CABLE ENTRIES ¾” OR 1” CAN BE PROVIDED. NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY.

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HE13


Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE . IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. TYPE: HE13 SELECTOR SWITCH CAN BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

FRONT VIEW BOTTOM VIEW SIDE VIEW OPEN VIEW


CODE DRAWING DESCRIPTION HE14


Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE . IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. TYPE: HE14 SELECTOR SWITCH CAN BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

FRONT VIEW


OPEN VIEW

HG10


Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HG10

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW




Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station with Ammeter without any canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HG11

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HG17

TYPE: HG17

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn with integral canopy but with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg MISC Ammeter will be provided.wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make.AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG17

FRONT VIEW

TOP VIEW

SIDE VIEW

OPEN VIEW



Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn without any canopy but with 1NO 2Pole TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg MISC Ammeter will be provided.wired up to 5:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make.AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HG18 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG18

TOP VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HG19

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1NO 2Pole 25A TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 3nos. in any combination of P.B and lamp holder, wired up to 11:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG19

CATALOGUE-P.B STN PAGE 32 OF 76

CODE DRAWING DESCRIPTION HG20 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-

inforced Polyster) P.B. Stn. with integral canopy on cover with 1NO 2Pole 25A TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 2nos. in any combination of P.B and lamp holder, wired up to 10:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG20

HG21

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. without any canopy but with 1NO 2Pole 25A TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 3nos. in any combination of P.B and lamp holder, wired up to 11:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG21

CATALOGUE-P.B STN PAGE 33 OF 76


TRIP

NEUTRALCLOSE

H SU

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. without any canopy but with 1NO 2Pole 25A TRIP-Neutral- Close Breaker Control Switch Spring Return to Neutral from Trip & Close, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 2nos. in any combination of P.B and lamp holder, wired up to 10:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. TNC SWICH will be KAYCEE make. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. MAX. 4 POLE T-N-C SWITCH CAN BE PROVIDEDTYPE: HG22

HH11


Design, Manufacturing & Supply of FRP (FIBRE GLASS REINFORCED) Start/Stop P.B. Station with integral canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HH11

`FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HH12

Design, Manufacturing & Supply of FRP (FIBRE GLASS REINFORCED) Start/Stop P.B. Station without any canopy with 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM. SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HH12

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HI13

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE

AS PER ABOVE SPECS

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station with Ammeter with integral canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96x96mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HI13

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HI14

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICS

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Start/Stop P.B. Station with Ammeter without any canopy with 1no.shrouded green actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96x96mm M.I.S.C.90 degree scale Ammeter wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HI14

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HK08

IN THIS LCS MAX. 2CONTACTS OF ANY COMBINATION OF NO OR NC CONTACT CAN BE PROVIDED ON EACH PB TYPE: HK08

Supply of POLY CARBONATE for/rev/Stop P.B. Station without canopy & without terminals,with 2nos shrouded green act. with No contact for for/rev, 1no.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE. NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HK21

TYPE: HK21

UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB & UPTO 20 TERMINALS

CAN BE PROVIDED

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/ Reverse/Stop P.B.Station without canopy with 2no.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM, All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given). THICKNESS OF ENCLOSURE 3-4MM,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW


HK22

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION.

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/ Reverse/Stop P.B.Station with integral canopy with 1no.shrouded yellow actuator with NO contact for forward 1no.shrouded black spring return actuator with NO contact for Reverse, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.)THICKNESS OF ENCLOSURE 3-4MM IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HK22 UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB & UPTO 20 TERMINALS CAN BE PROVIDED

FRONT VIEW

TOP / BOTTOM VIEW

SIDE VIEW

OPEN VIEW

F/CATALOGUE-P.B STN PAGE 37 OF 76 CODE DRAWING DESCRIPTION HL09


Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/Reverse/Stop P.B.Station with canopy with 1no.shrouded yellow actuator with NO contact for forward 1no.shrouded black spring return actuator with NO contact for Reverse, 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE. TYPE HL09 IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/ BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HL10


AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/Reverse/Stop P.B.Station without any canopy with 1no.shrouded yellow actuator with NO contact for forward 1no.shrouded black spring return actuator with NO contact for Reverse, 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE. TYPE HL10,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HM11


WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER

ABOVE SPECIFICATION .

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) FOR/REV/Stop P.B. Station with INTEGRAL canopy with 2nos.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HM11

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HM12



ABOVE SPECIFICATION

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) FOR/REV/Stop P.B. Station without ANY canopy with 2nos.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.72x72mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HM12

FRONT VIEW


OPEN VIEW


CODE DRAWING DESCRIPTION HN11


Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/Reverse/Stop P.B.Station with canopy with 1no.shrouded yellow actuator with NO contact for forward 1no.shrouded black spring return actuator with NO contact for Reverse, 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE. TYPE HN11 IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HN11

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HN12

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL . ACT. PRODUCT WILL BE AS PER ABOVE SPECS.

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) Forward/Reverse/Stop P.B.Station without any canopy with 1no.shrouded yellow actuator with NO contact for forward 1no.shrouded black spring return actuator with NO contact for Reverse, 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96mm M.I.S.C.90 degree scale Ammeter wired up to 7:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same. Extra price will be as per list given).AMMETER WILL BE MECO MAKE. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM TYPE: HN11 TYPE: HN12

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


CODE DRAWING DESCRIPTION HO05



ABOVE SPECIFICATION .

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) FOR/REV/Stop P.B. Station with INTEGRAL canopy with 2nos.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96x96mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HO05

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HO06



ABOVE SPECIFICATION

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) FOR/REV/Stop P.B. Station without ANY canopy with 2nos.shrouded green spring return actuator with NO contact for for/rev, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.96X96 mm M.I.S.C.90 degree scale Ammeter and 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, Selector Switch,wired up to 10:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH COULD BE UPTO 2POLE 2WAY WITH OR WITHOUT OFF TYPE: HO06

FRONT VIEW


OPEN VIEW

F/CATALOGUE-P.B STN PAGE 41 OF 76 CODE DRAWING DESCRIPTION HQ01

NOTE: IMAGES, DRAWING AND WIRING DIA.ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAXIMUM UPTO 2 CONTACTS IN ANY COMBINATION OF NO OR NC CAN BE PROVIDED

Supply of FRP/POLY CARBONATE Start/Stop P.B. Station without canopy & without terminals,with 2nos shrouded green act. with No contact for start, 2nos.M.RED STAYPUT actuator with NC contact for stop. Cable termination directly on element mounted on cover.MAX.2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS/TEKNIC Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer. Extra price will be as per list given). EXTERNAL MOUNTING LEGS FOR WALL/STRUCTURE MOUNTING. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 ENCLOSURE WILL HAVE LIGHT GRAY SHADE.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE TYPE: HQ01

FRONT VIEW


OPEN VIEW

HQ16

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM- TYPE: HQ16

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) WITH 2NOS Start/Stop P.B. Station with integral canopy with 2no.shrouded green spring return actuator with NO contact for start, & 2no. M.Red Stayput actuator with NC contact for stop wired up to 6:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED.

FRONT VIEW


OPEN VIEW



NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM-

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) WITH 2NOS Start/Stop P.B. Station without any canopy with 2no.shrouded green spring return actuator with NO contact for start, & 2no. M.Red Stayput actuator with NC contact for stop wired up to 6:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM 6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE ,IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. . TYPE: HQ17

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HQ22

IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH MAY BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) for/rev/Stop P.B. Station with integral canopy with 2nos.shrouded yellow/black spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE -TYPE: HQ22 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


IN THIS LCS UPTO 2NO+2NC CONTACT ELEMENTS CAN BE PROVIDED ON EACH PB AND UPTO 20 TERMINALS CAN BE PROVIDED. UPTO MAX 4 ENTRIES CAN BE PROVIDED AT BOTTOM.SELECTOR SWITCH MAY BE UPTO 2P- 2WAY WITH OR WITHOUT OFF

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) for/rev/Stop P.B. Station without any canopy with 2nos.shrouded yellow/black spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop, 1no.6A CAM type 1 pole 2 way Local/Remote or auto/manual, SELECTOR Switch,wired up to 8:2.5sqmm.connectwell clip on terminals,by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements & actuators will be of SIEMENS Make. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.). IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5,THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE -TYPE: HQ23 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HR01 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass

Re-inforced Polyster) P.B. Stn. without any canopy but with 1No. 2 Pole 2way selector switch, and 6nos. in any combination of P.B and lamp holder, wired up to 13:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. SELECTOR SWICH will be KAYCEE/SIEMENS make,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HR01

F/CATALOGUE-P.B STN PAGE 44 OF 76 CODE DRAWING DESCRIPTION HR02 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber

Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1No. 2 Pole 2way selector switch, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 6nos. in any combination of P.B and lamp holder, wired up to 15:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. SELECTOR SWICH will be KAYCEE/SIEMENS make, AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HR02

HR03

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1No. 2 Pole 2way selector switch, and 6nos. in any combination of P.B and lamp holder, wired up to 13:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. SELECTOR SWICH will be KAYCEE/SIEMENS make,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. TYPE: HR03

F/CATALOGUE-P.B STN PAGE 45 OF 76 CODE DRAWING DESCRIPTION HR04 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber

Glass Re-inforced Polyster) P.B. Stn. without any canopy but with 1No. 2 Pole 2way selector switch, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 6nos. in any combination of P.B and lamp holder, wired up to 15:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. SELECTOR SWICH will be KAYCEE/SIEMENS make, AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HR02

HS01

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. without any canopy but with and 6nos. in any combination of P.B and lamp holder, wired up to 11:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. TYPE: HS01

F/CATALOGUE-P.B STN PAGE 46 OF 76 CODE DRAWING DESCRIPTION HS02

Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 6nos. in any combination of P.B and lamp holder, wired up to 13:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. TYPE: HT02

HS03 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover and 6nos. in any combination of P.B and lamp holder, wired up to 11:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 20 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. ,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HS03

F/CATALOGUE-P.B STN PAGE 47 OF 76 CODE DRAWING DESCRIPTION HS04 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber

Glass Re-inforced Polyster) P.B. Stn. Without any canopy but with 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 6nos. in any combination of P.B and lamp holder, wired up to 15:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. AMMETER WILL BE MECO MAKE IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HS04

HT01 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. without any canopy but with 1No. 2 Pole 2way selector switch, and 4nos. in any combination of P.B and lamp holder, wired up to 10:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom, IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HT01

F/CATALOGUE-P.B STN PAGE 48 OF 76 CODE DRAWING DESCRIPTION HT02 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber

Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1No. 2 Pole 2way selector switch, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 4nos. in any combination of P.B and lamp holder, wired up to 12:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC. TYPE: HT02

HT03 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber Glass Re-inforced Polyster) P.B. Stn. with integral canopy on cover with 1No. 2 Pole 2way selector switch, and 4nos. in any combination of P.B and lamp holder, wired up to 10:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HT03

F/CATALOGUE-P.B STN PAGE 49 OF 76 CODE DRAWING DESCRIPTION HT06 Design, Manufacturing & Supply of Hot Moulded FRP (Fiber

Glass Re-inforced Polyster) P.B. Stn. without any canopy but with 1No. 2 Pole 2way selector switch, 1NO 72x72mm OR 96X96mm 90 deg. MISC Ammeter and 4nos. in any combination of P.B and lamp holder, wired up to 12:2.5sqmm.connectwell clip on terminals, by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX 40 TERMINALS CAN BE PROVIDED External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. AMMETER WILL BE MECO MAKE,IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPEC.TYPE: HT06



CATEGORY HP SPECIFICATION FOR CAST ALU. PIL BOXES(MANNUAL CALL POINT BREAKGLASS TYPE)

Supply of Cast Aluminium Pil box suitable for wall/Structure mounting. All the enclosures are cast out of superior quality aluminium alloy. All the surfaces are carefully cleaned and levelled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by RED colour per IS5.Powder coating gives very tough durable and extremely smooth surface. All the mating surfaces are provided with round NEOPRENE rubber gasket in the groove so as to make it effectively dust and vermin proof. Typical enclosures with different types of actuators mounted are tested for IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 . Our PIL BOXES are suitable for outdoor installation without any canopy. MOUNTING: External four lugs are provided for fixing. The lugs offset in such a way that the rear part of the unit stays away from the surface by at least 3mm.. MOUNTING: External lugs are provided for fixing. The lugs offset such that the rear part of the unit stays away from surface. FIXING OF ELEMENT: 1NO+1NC contact element is mounted inside. Cover is fixed bolted type A pointed piece is fixed on element and on smashing of glass this piece will pierce through glass and change over of contacts will take place. CABLE ENTRIES: Threaded cable entries are provided at the bottom. HARDWARE: All external hardware used will be Stainless Steel.EARTHING: Earthing is provided on both sides of the enclosures by 5mm screw with two plain washers and one spring washer. EXTERNAL CANOPY: Our Pil Boxes are suitable for outdoor mounting without any canopy. We also manufacture Pil Boxes with aluminium integral canopy. INSPECTION & TESTING: Each Pil Box will be subjected to routine tests in accordance with relevant Indian Standards-IS-8623-1,1993 AND NEW STANDARD FOR FACTORY BUILT ASSEBLIES-IS/IEC61439 & including the following:(1) Dimensional check as per drawing. (2) Operation test.(3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60 Seconds.(5) Earth continuity test. SALIENT FEATURES OF `HANSU' P.B.STATIONS: (a) Each P.B Stn. is in Cast Aluminium enclosure & epoxy powder coated.(b) Actuator/Elements are TEKNIC/ SIEMENS make which are known for quality and reliability. Even spares are available freely anywhere in India.(c) Better than IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001.(d) Non deteriorating Neoprene sponge rubber gasket




SPECIFIC REQUIREMENTS FOR CAST W.P.BREAK GLASS TYPE P.B.STATIONS CODE DRAWING DESCRIPTION HP01



MAX.20 TERMINALS CAN BE PROVIDED. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE. MAX.4:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM. TYPE:HP01

Supply of Cast Alu. (LM-6) industrial break glass types LCS (Pil Box) with integral Canopy and with 1no.1NO+1NC contact SIEMENS make. (NO contact becomes NC when glass is pressing the contacts but will become NO when you smash the glass. Same way NC contact becomes NO when glass is pressing the contacts but will become NC when you smash the glass), wired to 4nos. 2.5sqmm CONNECTWELL clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. External legs are provided for wall/structure mounting. All elements will be of SIEMENS Make. Glass will be provided on cover such that contact element will remain pressed all the time. Chain and hammar will be provided to smash glass in case of emergency or fire. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS POST OFFICE RED SHADE AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE

FRONT VIEW TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HP02



MAX.20 TERMINALS CAN BE PROVIDED. TERMINALS WILL HAVE TERMINAL MARKER

ON ONE SIDE. MAX.4:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM.

TYPE:HP02

Supply of Cast Alu. (LM-6) industrial break glass types LCS (Pil Box) without any Canopy and with 1no.1NO+1NC contact SIEMENS make. (NO contact becomes NC when glass is pressing the contacts but will become NO when you smash the glass. Same way NC contact becomes NO when glass is pressing the contacts but will become NC when you smash the glass), wired to 4nos. 2.5sqmm CONNECTWELL clip on terminals by grey PVC insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. External legs are provided for wall/structure mounting. All elements will be of SIEMENS Make. Glass will be provided on cover such that contact element will remain pressed all the time. Chain and hammar will be provided to smash glass in case of emergency or fire. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS POST OFFICE RED SHADE AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE



TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 SPECIFIC REQUIREMENTS FOR CAST W.P.BREAK GLASS TYPE P.B.STATIONS

CODE DRAWING DESCRIPTION HP05

SIZE:100x100x65mm. TYPE: HP05 QTY NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

Supply of Cast Alu. (LM-6) industrial break glass types LCS (Pil Box) without canopy, without terminals, with 1no.1NO+1NC contact SIEMENS make. (NO contact becomes NC when glass is pressing the contacts but will become NO when you smash the glass. Same way NC contact becomes NO when glass is pressing the contacts but will become NC when you smash the glass), External legs are provided for wall/structure mounting. Glass will be provided on cover such that contact element will remain pressed all the time. Chain and hammar will be provided to smash glass in case of emergency or fire. External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS POST OFFICE RED SHADE AS PER IS5.THICKNESS OF ENCLOSURE 3-4MM,6MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY SS SCREWS 5MM CAPTIVE

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

Supply of Cast Al. Hooter Box suitable for wall/ structure mounting. All enclosures are cast out of superior quality Aluminium alloy. All surfaces are carefully cleaned and leveled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static spray method by light grey shade 641 as per IS5. All the mating surface are provided with round rubber gasket in the groove so as to make in effective dust and vermain proof.

SPECIFIC REQUIREMENTS FOR CAST W.P.HOOTER CODE DRAWING DESCRIPTION HP06

Supply of Cast Alu. (LM-6) industrial hooter with canopy on cover, covering hooter, complete with 12V, 24/30V, 40/60V, 110/230V, 220/260V AC/DC, with rated current 35 to 40mA, rated frequency 1.5KHz to 5KHz, sound output 100dB to 120dB with 100 meter range, wired upto 2Nos 2.5sqmm terminals. 2:3/4” cable entry will be provided at the bottom. SIZE: 160x160x80mm. TYPE: HP06 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY.

FRONT VIEW



TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 F/CATALOGUE-P.B STN PAGE 52 OF 76

CODE DRAWING DESCRIPTION HP51

TYPE: HP51

MAX. 6 TERMINALS CAN BE PROVIDED. .

DESIGN, MANUFACTURE & SUPPLY OF FLAME PROOF/WP PILL BOX/MANNUAL CALLPOINT / BREAKGLASS TYPE P.B.STATION IN CAST ALUMINIUM LM6 ENCLOSURE WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO+1NC CONTACT SIEMENS MAKE (NO CONTACT BECOMES NC WHEN GLASS IS PRESSING THE CONTACT BUT WILL BECOME NO WHEN YOU SMASH THE GLASS SAME WAY NC CONTACT BECOMES NO WHEN GLASS IS PRESSING THE CONTACT BUT WILL BECOME NC WHEN YOU SMASH THE GLASS ) WILL BE WIRED UP TO 4 NOS. 2.5 SQMM CONNECTWELL clip on terminals,by grey FRLS insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE 2:3/4"CABLE ENTRY WILL BE AT THE BOTTOM.GLASS WILL BE PROVIDE ON COVER SUCH THAT CONTACT ELEMENT WILL REMAIN PRESSED ALL THE TIME. CHAIN & HAMMER WILL BE PROVIDED TO SMASH GLASS IN CASE OF EMERGENCY OR FIRE. EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING.BOTH CHAMBERS WILL HAVE 100MM CLEAR DIA.CMRI Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

FRONT VIEW

SIDE VIEW

CATEGORY –HY – LIMIT SWITCHES

SPECIFICATION & QUOTATION FOR FLAMEPROOF/WEATHER LIMIT SWITCHES Cast Aluminium LM6 Limit Switch Boxes dust, vermain and Flameproof /weatherproof suitable for wall/Structure mounting. All the enclosures are cast out of superior quality aluminium alloy-LM-6. All the surfaces are carefully cleaned and levelled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth coating on the surface. All the mating surfaces are provided with NEOPRENE round rubber gasket in the groove so as to make it effectively dust and vermain proof. FLAMEPROOF/WEATHER LIMIT SWITCHES ARE SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND HAS IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. FLAMEPROOF/WEATHER LIMIT SWITCHES ARE tested at CIMFR for flameproof and weather proof test. Our Limit Switch Boxes suitable for outdoor installation without any canopy. MOUNTING: External lugs are provided for fixing. FIXING OF TERMINAL: For wall mounting/Structure Mounting Terminal Boxes. terminals, if provided, are fixed inside the box. Cover is fixed bolted type. CABLE ENTRIES: Threaded cable entries are provided at bottom. EARTHING: Earthing is provided on both sides of the enclosures by 5mm.screw with two plain washers and one spring washer. INSPECTION& TESTING: Each Box is subjected to routine tests in accordance with relevant Indian Standards including following:(1) Dimensional check as per drawing. (2) Operation test. (3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60 Sec. (5) Earth continuity test.6) Hydraulic Test 7) Impact test.

F/CATALOGUE-P.B STN PAGE 53 OF 76 SPECIFIC REQUIREMENTS FOR FLAMEPROOF/WEATHER LIMIT SWITCHES

CODE DRAWING DESCRIPTION HY51

Supply of Flame proof/Explosion proof direct entry limit Switch in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO+1NC CONTACT WILL BE WITHOUT WIRING. DIRECT CABLE TERMINATION ON LIMIT SWITCH ELEMENTS. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON THREE SIDES.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING.BOTH CHAMBERS WILL HAVE 100MM CLEAR DIA.CIMFR Certificate No CIMFR\TC\P/H739 Dt 24.3.2015, Type: HY51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

SIDE VIEW

OPEN VIEW

HY52

MAX. 6 TERMINALS CAN BE PROVIDED.

Supply of Flame proof/Explosion proof INdirect entry limit Switch in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001.IT WILL BE COMPLETE WITH 1NO+1NC LIMIT SWITCH CONTACT IN ONE CHAMBER AND WILL BE WIRED UP TO 4 NOS. 2.5 SQMM CONNECTWELL clip on terminals,by grey FRLS insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE 2:3/4"CABLE ENTRY WILL BE AT THE BOTTOM. EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING.BOTH CHAMBERS WILL HAVE 100MM CLEAR DIA. CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HY52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

TOP VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 WEB SITE:www.hansucontrols.com,E-Mail:[email protected],[email protected]


CAT- HC, HD, HE, HF, HG, HK, HQ, HR, HS, HT, HU, HV, HW, HX SPECIFICATION & QUOTATION FOR FLAMEPROOF/WEATHER PROOF P.B.STATION

Supply of Cast Aluminium LM6 P.B.STATIONS Flame proof/weather proof suitable for wall/Structure mounting. All the enclosures are cast out of superior quality aluminium alloy-LM-6. All the surfaces are carefully cleaned and levelled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth coating on the surface. All the mating surfaces are provided with NEOPRENE round rubber gasket in the groove so as to make it effectively dust and vermain proof. FLAMEPROOF/WEATHER P.B.STN ARE SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND HAS IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. FLAMEPROOF/WEATHER P.B.STN ARE tested at CIMFR for flameproof and weather proof test. Our P.B.STN Boxes suitable for outdoor installation without any canopy. MOUNTING: External lugs are provided for fixing. FIXING OF ACT. ELEMENTS: For wall mounting/Structure Mounting P.B. STATIONS are fixed inside the box. Cover is fixed bolted type. CABLE ENTRIES: Threaded cable entries are provided at bottom. EARTHING: Earthing is provided on both sides of the enclosures by 5mm.screw with two plain washers and one spring washer. INSPECTION& TESTING: Each Box is subjected to routine tests in accordance with relevant Indian Standards including following:(1) Dimensional check as per drawing. (2) Operation test. (3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60 Sec. (5) Earth continuity test.6) Hydraulic Test 7) Impact test.

SPECIFIC REQUIREMENTS FLP/WP P.B.STATIONS CODE DRAWING DESCRIPTION HC52

2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.

Supply of Flame proof/Explosion proof direct entry E.STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NC CONTACT WITHOUT WIRING. DIRECT CABLE TERMINATION ON CONTACT ELEMENT. Elements will be SIEMENS make. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. CHAMBER WILL HAVE 100MM CLEAR DIA.CIMFR Certificate No CIMFR\TC\P/H739 Dt 24.3.2015, Type: HC52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HC57

2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED

Supply of Flame proof/Explosion proof E.STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001.IT WILL BE COMPLETE WITH 1NC CONTACT IN ONE CHAMBER AND WILL BE WIRED UP TO 2 NOS. 2.5 SQMM CONNECTWELL clip on terminals,by grey FRLS insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE 2:3/4"CABLE ENTRY WILL BE AT THE BOTTOM. EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING.BOTH CHAMBERS WILL HAVE 100MM CLEAR DIA. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HC57 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

HC57 WITH CANOPY

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 F/CATALOGUE-P.B STN PAGE 55 OF 76

SPECIFIC REQUIREMENTS FLP/WP P.B.STATIONS CODE DRAWING DESCRIPTION HC58


SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO AMMETER/INDICATOR WITHOUT WIRING. DIRECT CABLE TERMINATION ON AMMETER/INDICATOR. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY 8MM ALLEN BOLT 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. CHAMBER WILL HAVE 100MM CLEAR DIA.CIMFR CERTIFICATE NO CIMFR\TC\P/H739 DT 24.3.2015, TYPE: HC58

FRONT VIEW

SIDE VIEW

OPEN VIEW

HD51

Supply of Flame proof/Explosion proof START/STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 3:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HD51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED

HD51 WITH CANOPY

FRONT VIEW SIDE VIEW

F/CATALOGUE/P.B STN PAGE 56 OF 76 CODE DRAWING DESCRIPTION HD52

EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED

DESIGN, MANUFACTURE & SUPPLY OF FLAME PROOF/WP ROTARY SW. IN CAST ALUMINIUM LM6 ENCLOSURE WITHOUT CANOPY SUITABLE FOR INSTALLATION IN GROUP IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. COMPLETE WITH 1NO 16A 2POLE ON OFF ROTARY SWITCH OF KAYCEE OR EQUIVALENT,wired up to 4:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HD52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION MAX. 6 TERMINALS CAN BE PROVIDED

VIEW WITH CANOPY

TOP VIEW

SIDE VIEW

OPEN VIEW

HD53

Supply of Flame proof/Explosion proof P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. COMPLETE WITH 1NO. 230V RED INDICATING LAMP AND 1 NO. 230V AC GREEN INDICATING LAMP,wired up to 3:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All LAMP HOLDERS will be of SIEMENS/TEKNIC Make. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HD53 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED MAX. 6 TERMINALS CAN BE PROVIDED


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 F/CATALOGUE/P.B STN PAGE 57 OF 76 CODE DRAWING DESCRIPTION HD54

MAX. 6 TERMINALS CAN BE PROVIDED


SUPPLY OF FLAME PROOF/EXPLOSION PROOF P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO AMMETER/INDICATOR IN ONE CHAMBER AND TERMINALS IN ANOTHER CHAMBER. AND WILL BE WIRED UP TO 2 NOS. 2.5 SQMM CONNECTWELL clip on terminals,by grey FRLS insulated 1.5sqmm copper wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE 2:3/4"CABLE ENTRY WILL BE AT THE BOTTOM. EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING.BOTH CHAMBERS WILL HAVE 100MM CLEAR DIA. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HD54 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD55

EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR.

SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY START/STOP P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY WITHOUT TERMINALS. SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR START, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP.DITECT TEMINATION OF CABLE ON CONTACT ELEMENTS.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP. ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS COVER FIXING BY 8MM ALLEN BOLT CIMFR CERTIFICATE NO CIMFR\TC\P/H739 DT 24.3.2015, TYPE: HD55 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

F/CATALOGUE/P.B STN PAGE 58 OF 76 CODE DRAWING DESCRIPTION HD56

2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH ACTUATOR

SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY STOP P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY WITHOUT TERMINALS. SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP AND 1NO 240V AC RED LED TYPE LAMP.DITECT TEMINATION OF CABLE ON CONTACT ELEMENTS/LAMP HOLDER.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP. ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR CER. NO CIMFR\TC\P/H739 DT 24.3.2015, TYPE: HD56 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HD57

SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY STOP P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPYSUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP AND 1NO 240V AC RED LED TYPE LAMP. WIRED UP TO 4:2.5SQMM.CONNECTWELL CLIP ON TERMINALS BY GREY PVC INSULATED 1.5SQMM COPPER FRLS WIRE WITH TINNED COPPER CABLE LUGS AND FERRULES ON BOTH SIDES. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 2:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM. ALL LAMP HOLDERS WILL BE OF SIEMENS/TEKNIC MAKE. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HD57 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED MAX. 6 TERMINALS CAN BE PROVIDED

FRONTVIEW

BOTTOM VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038

F/CATALOGUE-P.B STN PAGE 59 OF 76 CODE DRAWING DESCRIPTION HE51


SUPPLY OF FLAME PROOF/EXPLOSION PROOF START/STOP WITH L/R SELECTOR P.B.STN IN TWO CHAMBERS IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1NO.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR START, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP,1NO 1 POLE 2WAY SELECTOR ACTUATOR WITH 1NO+1NC CONTACT FOR AUTO/MANUAL OR LOCAL/REMOTE, WIRED UP TO 6:2.5SQMM.CONNECTWELL CLIP ON TERMINALS BY GREY PVC INSULATED 1.5SQMM COPPER FRLS WIRE WITH TINNED COPPER CABLE LUGS AND FERRULES ON BOTH SIDES. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 2:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM. ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR CERTIFICATE NO CIMFR/TC/P/H165 DT 06.08.2015, TYPE: HE51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVEY ACTUATO.MAX. 6 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW OPEN VIEW

HE52

SUPPLY OF FLAME PROOF/EXPLOSION PROOF START/STOP WITH L/R SELECTOR P.B.STN IN THREE CHAMBERS IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1NO.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR START, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP,1NO 1 POLE 2WAY SELECTOR ACTUATOR WITH 1NO+1NC CONTACT FOR AUTO/MANUAL OR LOCAL/REMOTE, WIRED UP TO 6:2.5SQMM.CONNECTWELL CLIP ON TERMINALS BY GREY PVC INSULATED 1.5SQMM COPPER FRLS WIRE WITH TINNED COPPER CABLE LUGS AND FERRULES ON BOTH SIDES. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 2:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM.ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR CERTIFICATE NO CIMFR/TC/P/H63 DT 14.06.2016, TYPE: HE52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVEY ACTUATO.MAX. 6 TERMINALS CAN BE PROVIDED

FRONT VIEW

SIDE VIEW

OPEN VIEW

F/CATALOGUE-P.B STN PAGE 60 OF 76 CODE DRAWING DESCRIPTION HE54

TYPE: HE54 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

DESIGN, MANUFACTURE & SUPPLY OF FLAME PROOF/WP ROTARY SW. IN CAST ALUMINIUM LM6 ENCLOSURE WITHOUT CANOPY SUITABLE FOR INSTALLATION IN GROUP IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. COMPLETE WITH 1NO 16A 2POLE ON OFF ROTARY SWITCH OF KAYCEE OR EQUIVALENT, WITHOUT WIRING WITHOUT TERMINAS DIRECT TERMINATION ON SWITCH TERMINALS..External legs are provided for wall/structure mounting. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT, CIMFR CERTIFICATE NO CIMFR\TC\P/H739 Dt 24.3.2015.

FRONT VIEW TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

SPECIFICATION & QUOTATION FOR FLAMEPROOF/WEATHER PROOF DOL/REV/STAR-DELTA STARTER Supply of Cast Aluminium LM6 Flame proof/weather proof suitable for wall/Structure mounting. All the enclosures are cast out of superior quality aluminium alloy-LM-6. All the surfaces are carefully cleaned and levelled so as to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth coating on the surface. All the mating surfaces are provided with NEOPRENE round rubber gasket in the groove so as to make it effectively dust and vermain proof. FLAMEPROOF/WEATHER P.B.STN ARE SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND HAS IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. FLAMEPROOF/WEATHER DOL/REV/STAR-DELTA STARTER ARE tested at CIMFR for flameproof and weather proof test. Our P.B.STN Boxes suitable for outdoor installation without any canopy. MOUNTING: External lugs are provided for fixing.. Cover is fixed bolted type. CABLE ENTRIES: Threaded cable entries are provided at bottom. EARTHING: Earthing is provided on both sides of the enclosures by 5mm.screw with two plain washers and one spring washer.

SPECIFIC REQUIREMENTS FLP/WP DOL/REV/STAR-DELTA STARTER CODE DRAWING DESCRIPTION HF51 D-5

160X160MM X100MM DEPTH NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

Supply of FLAMEPROOF-EXPLOSION PROOF WP DIRECT ON LINE STARTER IN CAST ALUMINIUM LM-6 enclosure without canopy suitable for installation in GAS GROUP AREA IIA, IIB,IIC complete with 1no N.Green spring return actuator with NO contact for start & M. Red stayput actuator with NC contact for stop, 1no 9A contactor with thermal over load relay for DOL up to 5HP.DIRECT TERMINATION ON CONTACTOR AND RELAY TERMINALS. 2:3/4" cable entries at the bottom. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 5-6MM,3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS EXTERNAL AND 1NO INTERNAL EARTHING BY BRASS ROUND HEAD NICKLE PLATED SCREWS WITH PLAIN WASHER & SPRING WASHERS.COVER FIXING BY SS ALLEN BOLT 6MM CIMFR Certificate No CIMFR\TC\P/ H463 DT.8.3.16- Wt.4.5 Kg.App. TYPE: HF51 Qty:

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 F/CATALOGUE-P.B STN PAGE 61 OF 76 CODE DRAWING DESCRIPTION HF51-D20

200X200MM X100MM DEPTH NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL

PRODUCT WILL BE AS PER ABOVE SPECS

Supply of FLAMEPROOF-EXPLOSION PROOF WP DIRECT ON LINE STARTER IN CAST ALUMINIUM LM-6 enclosure without canopy suitable for installation in GAS GROUP AREA IIA, IIB,IIC complete with 1no N.Green spring return actuator with NO contact for start & M. Red stayput actuator with NC contact for stop, 1no UPTO 40A contactor with thermal over load relay for DOL up to 20HP.WIRED UPTO 10SQMM 6NOSTERMINALS. 2:3/4" cable entries at the bottom.IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 5-6MM,3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS EXTERNAL AND 1NO INTERNAL EARTHING BY BRASS ROUND HEAD NICKLE PLATED SCREWS WITH PLAIN WASHER & SPRING WASHERS.COVER FIXING BY SS ALLEN BOLT 6MM TYPE: HF51 Qty: CIMFR Cer.No CIMFR\TC\P/H463 DT.8.3.16 Wt.4.5Kg. App.

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HF56-R20

200X200MM X100MM DEPTH

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER

ABOVE SPECS

Supply of FLAMEPROOF-EXPLOSION PROOF WP REVERSIBLE DIRECT ON LINE STARTER IN CAST ALUMINIUM LM-6 enclosure without canopy suitable for installation in GAS GROUP AREA IIA, IIB,IIC complete with 2nos N.Green spring return actuator with NO contact for FOR/REV & M. Red stayput actuator with NC contact for stop, 1no UPTO 40A contactor with thermal over load relay for RDOL up to 20HP.WIRED UPTO 10SQMM 6NOSTERMINALS. 2:3/4" cable entries at the bottom.IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001, EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 5-6MM,3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE 2NOS EXTERNAL AND 1NO INTERNAL EARTHING BY BRASS ROUND HEAD NICKLE PLATED SCREWS WITH PLAIN WASHER & SPRING WASHERS.COVER FIXING BY SS ALLEN BOLT 6MM CIMFR Cer.No CIMFR\TC\P/H463 DT.8.3.16 Wt.4.5Kg. App TYPE: HF51 Qty:

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


SPECIFIC REQUIREMENTS FLP/WP DOL/REV/STAR-DELTA STARTER CODE DRAWING DESCRIPTION HF51 S-D-20


Supply of FLAMEPROOF-EXPLOSION PROOF WP STAR-DELTA STARTER IN CAST ALUMINIUM LM-6 enclosure without canopy suitable for installation in GAS GROUP AREA IIA, IIB,IIC complete with 1no N.Green spring return actuator with NO contact for start & M. Red stayput actuator with NC contact for stop, 1no UPTO 40A contactor with thermal over load relay for STAR/DELTA up to 20 HP.WIRED TO TERMINALS. 2:3/4" cable entries at the bottom. IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.THICKNESS OF ENCLOSURE 5-6MM,3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS EXTERNAL AND 1NO INTERNAL EARTHING BY BRASS ROUND HEAD NICKLE PLATED SCREWS WITH PLAIN WASHER & SPRING WASHERS.COVER FIXING BY SS ALLEN BOLT 6MM CIMFR Cer.No CIMFR\TC\P/H463 DT.8.3.16 Wt.4.5Kg. TYPE: HF51 Qty:

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038 F/CATALOGUE-P.B STN PAGE 63 OF 76 CODE DRAWING DESCRIPTION HG51

Supply of Flame proof/Explosion proof START/STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1no.shrouded green spring return actuator with NO contact for start, & 1no. M.Red Stayput actuator with NC contact for stop AND 1NO 65MM DIA MISC 90 DEGREE SCALE AMMETER,wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16 , Type: HG51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED,2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW

`SIDE VIEW WITH CANOPY

OPEN VIEW

HG52


Supply of Flame proof/Explosion proof P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1no.2 POLE T-N-C SWITCH spring return TO NEUTRAL AND 1NO 65MM DIA MISC 90 DEGREE SCALE AMMETER,wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT TNC SWITCH WILL BE KAYCEE MAKE.SWITCHING UNIT WILL BE IN 200MM DIA AND TERMINATION WILL BE IN 120MM DIA CHAMBER CIMFR Certificate-CIMFR/TC/P , Type: HG52 EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED,UPTO 4 POLE SWITCH CAN BE PROVIDED.MAX. 15 TERMINALS CAN BE PROVIDED


EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR.

SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY FOR/REV/STOP P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY WITHOUT TERMINALS. SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EX-d-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 2NOS.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR FOR/REV, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP.DITECT TEMINATION OF CABLE ON CONTACT ELEMENTS.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP. ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR CERTIFICATE NO CIMFR\TC\P/H739 DT 24.3.2015, TYPE: HK51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW OPEN VIEW

HK52

Supply of Flame proof/Explosion proof FOR/REV/STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 2nos.shrouded green spring return actuator with NO contact for FOR/REV, & 1no. M.Red Stayput actuator with NC contact for stop wired up to 5:2.5sqmm.connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H165 Dt 06.08.2015, Type: HK52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED.

TOP VIEW

SIDE VIEW

OPEN VIEW


EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVERY ACTUATOR NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

SUPPLY OF FLAME PROOF/EXPLOSION PROOF DIRECT ENTRY START/STOP P.B.STN IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY WITHOUT TERMINALS. SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EX-d-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001 COMPLETE WITH 1NOS.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR START, 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP.AND 1NO RED 240V AC INDICATING LAMP FOR ON. DITECT TEMINATION OF CABLE ON CONTACT ELEMENTS AND LAMP HOLDER.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 1:3/4"CABLE ENTRY WILL BE PROVIDED ON BOTTOM AND 1:3/4” ENTY WILL BE POVIDED AT TOP. ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR CERTIFICATE NO CIMFR\TC\P/H739 DT 24.3.2015, TYPE: HK51

FRONT VIEW BOTTOM VIEW SIDE VIEW OPEN VIEW

HK54

Supply of Flame proof/Explosion proof STOP P.B.STN in Cast Aluminium enclosure (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 1no. M.Red Stayput actuator with NC contact for stop,2NS RED AND GREEN INDICATING LAMPS FOR ON-OF INDICATION, wired up to 5:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT,CIMFR Certificate-CIMFR/TC/P/H165 Dt 06.08.2015, Type: HK54 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW


Supply of Flame proof/Explosion proof START/STOP P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 2nos.shrouded green spring return actuator with NO contact for start, & 2nos.M.Red Stayput actuator with NC contact for stop,wired up to 6:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16, Type: HQ51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED,2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 6 TERMINALS CAN BE PROVIDED

TOP VIEW

OPEN VIEW

HQ52

SUPPLY OF FLAME PROOF/EXPLOSION PROOF FOR/REV/STOP WITH L/R SELECTOR P.B.STN IN THREE CHAMBERS IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 2NOS.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR FOR/REV, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP,1NO 1 POLE 2WAY SELECTOR ACTUATOR WITH 1NO+1NC CONTACT FOR AUTO/MANUAL OR LOCAL/REMOTE, WIRED UP TO 8:2.5SQMM.CONNECTWELL CLIP ON TERMINALS BY GREY PVC INSULATED 1.5SQMM COPPER FRLS WIRE WITH TINNED COPPER CABLE LUGS AND FERRULES ON BOTH SIDES. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 2:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM.ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16, TYPE: HQ52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVEY ACTUATO.MAX. 8 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW

OPEN VIEW

F/CATALOGUE-P.B STN PAGE 67 OF 76 CODE DRAWING DESCRIPTION HL51

SUPPLY OF FLAME PROOF/EXPLOSION PROOF FOR/REV/STOP WITH L/R SELECTOR P.B.STN IN THREE CHAMBERS IN CAST ALUMINIUM ENCLOSURE (LM-6),WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXD-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 2NOS.SHROUDED GREEN SPRING RETURN ACTUATOR WITH NO CONTACT FOR FOR/REV, & 1NO. M.RED STAYPUT ACTUATOR WITH NC CONTACT FOR STOP, AND 1NO 65MM DIA MISC 90 DEGREE SCALE AMMETER, WIRED UP TO 7:2.5SQMM.CONNECTWELL CLIP ON TERMINALS BY GREY PVC INSULATED 1.5SQMM COPPER FRLS WIRE WITH TINNED COPPER CABLE LUGS AND FERRULES ON BOTH SIDES. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.EXTERNAL LEGS ARE PROVIDED FOR WALL/STRUCTURE MOUNTING. 2:3/4"CABLE ENTRIES WILL BE PROVIDED AT THE BOTTOM.ALL ELEMENTS WILL BE OF SIEMENS MAKE. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16, TYPE: HL51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION 2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED WITH EVEY ACTUATO.MAX. 8 TERMINALS CAN BE PROVIDED

TOP VIEW

OPEN VIEW

HR51

Supply of Flame proof/Explosion proof 5 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 4nos.shrouded green spring return actuator with NO contact for FOR/REV HOIST AND LOWER, & 1no.M.Red Stayput actuator with NC contact for stop,wired up to 8:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT, CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16, Type: HR51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED,2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 8 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021 F/CATALOGUE-P.B STN PAGE 68 OF 76 CODE DRAWING DESCRIPTION HS52

Supply of Flame proof/Explosion proof 6 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB AND IIC GAS GROUP AREA-EXd-T6,IP65 AS PER IS/IEC-60079-1 2007 AND IP65 CLASS OF PROTECTION AS PER IS/IEC 60529-2001. WITH 5nos.shrouded green spring return actuator with NO contact for START,FOR/REV HOIST AND LOWER, & 1no.M.Red Stayput actuator with NC contact for stop,wired up to 10:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. 2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 8MM ALLEN BOLT, CIMFR Certificate No CIMFR/TC/P/H63 DT.14.6.16, Type: HS52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION EXTERNAL SHEET STEEL CANOPY CAN BE PROVIDED,2 CONTACTS OF ANY COMBINATION OF NO OR NC CAN BE PROVIDED.MAX. 10 TERMINALS CAN BE PROVIDED

TOP VIEW

SIDE VIEW

OPEN VIEW


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021 F/CATALOGUE-P.B STN PAGE 69 OF 76 CODE DRAWING DESCRIPTION HR53

Supply of Flame proof/Explosion proof 5 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 4nos.shrouded green spring return actuator with 1NO+1NC contact for FOR/REV HOIST AND LOWER, & 1no.Red LAMP FOR ON INDICATION,wired up to 8:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT,CIMFR Certificate no CMRI/TC/H607 Dt 09.07.97 , Type: HR53 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HS51

Supply of Flame proof/Explosion proof 6 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 6nos.shrouded green spring return actuator with 1NO+1NC contact for FOR/REV,LEFT,RIGHT,HOIST AND LOWER, ,wired up to 9:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, Certificate no CMRI/TC/H607 Dt 09.07.97 , Type: HS51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP VIEW

SIDE VIEW OPEN VIEW

F/CATALOGUE/P.B STN PAGE 70 OF 76 CODE DRAWING DESCRIPTION HS53

Supply of Flame proof/Explosion proof 7 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 6nos.shrouded green spring return actuator with 1NO+1NC contact for FOR/REV,LEFT,RIGHT,HOIST AND LOWER, & 1no.Red LAMP FOR ON INDICATION,wired up to 11:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, Certificate no CMRI/TC/H607 Dt 09.07.97 , Type: HS53 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP VIEW

SIDE VIEW

OPEN VIEW

HU51

Supply of Flame proof/Explosion proof 8 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 7nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT,HOIST AND LOWER,1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 12:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, CIMFR Certificate No , Type: HU51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION CMRI Certificate no CMRI/TC/H607 Dt 09.07.97

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW


F/CATALOGUE/P.B STN PAGE 71 OF 76 CODE DRAWING DESCRIPTION HV51

Supply of Flame proof/Explosion proof 12 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 11nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT,A.HOIST, A.LOWER, M.HOIST,M.LOWER, HOIST AND LOWER,1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 15:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION CMRI Certificate no CIMFR/TC/P/H140 Dt 30.08.16 TYPE: HV51

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HV52

NOTE: IMAGES, DRAWING, WIRING DIA ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECS

Supply of Flame proof/Explosion proof 9 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 8nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT,HOIST AND LOWER, 1NO M.RED PB FOR STOP,& 1no.Red LAMP FOR ON INDICATION,wired up to 14:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, CMRI Certificate no CIMFR/TC/P/H140 Dt 30.08.16 TYPE: HV52

FRONT VIEW


OPEN VIEW

F/CATALOGUE/P.B STN PAGE 72 OF 76 CODE DRAWING DESCRIPTION HV53


Supply of Flame proof/Explosion proof 10 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 9nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT, A.HOIST, A.LOWER, HOIST AND LOWER,1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 15:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, CMRI Certificate no CIMFR/TC/P/H140 Dt 30.08.16 TYPE: HV53

FRONT VIEW


OPEN VIEW

HV54

NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY

Supply of Flame proof/Explosion proof 11 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 9nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/ REV, LEFT, RIGHT,HOIST AND LOWER,AHOIST ALOWER 1NO M.RED PB FOR STOP,& 1no.Red LAMP FOR ON INDICATION,wired up to 17:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT, CMRI Certificate-CIMFR/TC/P/H140 Dt 30.08.16TYPE: HV54

FRONT VIEW



TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021 F/CATALOGUE/P.B STN PAGE 73 OF 76 CODE DRAWING DESCRIPTION HW51


CIMFR certificate no CIMFR/TC/P/H-195 DT 14.10.2016 TYPE: HW51

Supply of Flame proof/Explosion proof 13 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 11nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/ REV, LEFT, RIGHT,HOIST AND LOWER,AHOIST ALOWER M.HOIST MLOWER,1NO M.RED PB FOR STOP,& 1no.Red LAMP FOR ON INDICATION,wired up to 20:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:1"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HW52



Supply of Flame proof/Explosion proof 14 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 13nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT, A.HOIST, A.LOWER, M.HOIST,M.LOWER, HOIST AND LOWER,1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 21:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:3/4"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT.

F/CATALOGUE/P.B STN PAGE 74 OF 76

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

CODE DRAWING DESCRIPTION HW53



Supply of Flame proof/Explosion proof 15 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 13nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/ REV, LEFT, RIGHT,HOIST AND LOWER,AHOIST ALOWER M.HOIST MLOWER,M LEFT MRIGHT,1NO M.RED PB FOR STOP,& 1no.Red LAMP FOR ON INDICATION,wired up to 23:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:1"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLTTYPE: HW53

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HANSU CONTROLS

OFF: PLOT W-281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701. TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021

WEB SITE:www.hansucontrols.com,E-Mail:[email protected],hansucontrols@yahoo


TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021 F/CATALOGUE/P.B STN PAGE 75 OF 76 CODE DRAWING DESCRIPTION HW54


CIMFR certificate no CIMFR/TC/P/H-195 DT 14.10.2016

TYPE: HW54

Supply of Flame proof/Explosion proof 16 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 15nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT,A.HOIST, A.LOWER, M.HOIST,M.LOWER, HOIST AND LOWER,M.LEFT MRIGHT 1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 24:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:1"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT. TYPE: HW54 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION

FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HX52


Supply of Flame proof/Explosion proof 17 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 15nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/ REV, LEFT, RIGHT,HOIST AND LOWER,AHOIST ALOWER M.HOIST MLOWER,M LEFT MRIGHT,1NO M.RED PB FOR STOP,& 1no.Red LAMP FOR ON INDICATION,wired up to 26:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:1"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLTTYPE: HX52 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION ONLY.


FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

HX51


TYPE: HX51

Supply of Flame proof/Explosion proof 18 WAY P.B.STN in Cast Aluminium enclosure (LM-6) WITHOUT CANOPY SUITABLE FOR INSTALLATION IN IIA, IIB GAS GROUP AREA-EXd-T6,AS PER IS/IEC-60079-1 2007. WITH 17nos.shrouded green spring return actuator with 1NO+1NC contact for START,FOR/REV,LEFT,RIGHT,A.HOIST, A.LOWER, M.HOIST,M.LOWER, HOIST AND LOWER,M.LEFT MRIGHT 1NO M.RED STOP PB WITH 1NO+1NC CONTACT FO STOP,wired up to 27:2.5sqmm. connectwell clip on terminals by grey PVC insulated 1.5sqmm copper FRLS wire with tinned copper cable lugs and ferrules on both sides. TERMINALS WILL HAVE TERMINAL MARKER ON ONE SIDE.External legs are provided for wall/structure mounting. IT WILL BE IN TWO CHAMBERS ,ONE SWITCHING CHAMBER AND ANOTHER TERMINATION CHAMBER. (Push Button may be replaced by Lamp, Selector Actuator or Potentiometer, items remains same.).2:1"cable entries will be provided at the bottom. All elements will be of SIEMENS Make. THICKNESS OF ENCLOSURE 4-6MM,EPOXY POWDER COATED WITH 60 MICRONS LIGHT GRAY SHADE 631 AS PER IS5.3MM ROUND NEOPRENE RUBBER GASKET IN COVER GROOVE,2NOS BRASS EARTHING BY ROUND HEAD NICKLE PLATED BRASS SCREWS WITH PLAIN WASHER AND SPRING WASHERS,COVER FIXING BY 6MM ALLEN BOLT. TYPE: HX51 NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL AND ACTUAL PRODUCT WILL BE AS PER ABOVE SPECIFICATION



FRONT VIEW

TOP/BOTTOM VIEW

SIDE VIEW

OPEN VIEW

Documents

catalogue pb stn-19.0.16