Catalogue No14 Englisch Internet

8/9/2019 Catalogue No14 Englisch Internet

1/88


2/88


3/88

1

Our solutions for your service

No downtime and that goes for ourstaff as well

Markets, standards and products are changing at an ever

accelerating pace. So that we can stay on the ball to service

your evolving requirements, our staff are always kept up to

date on consulting, development and design practices.

This begins with the initial design phase, and goes rightthrough to the After-Sales Service, as far as maintenance

and modernisation are concerned.

The company also places a great deal of importance on

training young people. The goes for both the commercial

and technical areas. Rounded out by cooperation with

local colleges and universities, this means that there is

always a fresh wind of new ideas blowing through

PLANETA, which helps us to improve our offering to you,

little by little, day by day.

Relationship management for customersand suppliers

We put longterm partnerships and trusting cooperation first.

The continuous exchange of ideas with customers and

suppliers always helps us to improve the service we offer

to the market even more.

Growth is not everything

Our goal is not growth at any price. We wish to remain

the company with the most satisfied and loyalest customers

in the business. This means we value safety, environmental

protection and efficiency very highly. The rest takes care of

itself. This is what we have been working on since 1861,

each and every day.

Paul H. Klawitter Christian P. Klawitter

Matthias B. Klawitter Detlev Middelhauve


4/88

Note: PLANETA are constantly striving to increase and further improve the product range. Whilst every effort has been made to ensure the accuracy of the specificationsand dimensions included at the time of printing, we are unable to warrant the given information. Designs and specifications are subject to change without notice orobligation. The inclusion of any product does not guarantee the availability of that product in the future. Customers should check both the availability and conformance ofthe product to any critical parameters at the time of ordering!

2014 by PLANETA Form 05/HKE

Page 3-22

Page 23-34

2

bersicht

2

Page 35-443

Page 45-704

Page 71-845

Content of catalogue

Manual lifting and pulling equipmentLever hoists, Manual chain hoists, Grip pullers, Trolleys,

Low headroom trolley hoists, Super-low combined trolley hoists, Beam clamps

EX-proofEX-proof manual chain hoists, EX-proof push and geared trolleys,

Air chain hoists, Air rope hoists, Air supply

Electric hoistsElectric chain hoists GCH, Trolleys for electric hoists, Electric rope hoists

Rope winchesWinch options, Wire ropes, Electric rope winches, Electric rope winch PFW,

Electric rope winch PORTY, Worm gear winch types, Compact rope winches,

Planetary gear winches, Capstans, Manual rope winches

Lifting and transporting accessoriesFlat webbing slings, Round slings, Ratchet lashing, Chain slings,

Magnetic lifter, Plate clamps, Hydraulic pallet truck, Hydraulic jacks,

Mechanical steel jacks


5/88

SEIT 1861Vorspann fehlt

3

1


6/88

HebelzugPLANETA hoists

4

Overview of PLANETA manual hoists:

General Information

PLANETA hoists and trolleys are designed to have a long

service life even under the toughest operating conditions and

comply with the machinery directive. Each hoist that leaves our

factory is tested with an appropriate excess load before

delivery. This is certified in an inspection report when a serial

number is assigned, and is enclosed with the item.

When developing our hoists, we do not only place

value on a long service life, but also on absolute

functionality, maximum safety during use and an

appealing design.

We only use galvanised load chains that conform to

DIN EN 817-7-T and that are manufactured in Germany or

Europe, in order to guarantee the highest level of safety.

We guarantee that spare parts will be available for a long time

so that you can work with your hoist for many years.

We are happy to assist you with the recommended annual

inspection of your hoists by passing you on to a designated,

trained PLANETA service partner throughout the entire

federal territory.

Lever hoists

Our WICHTEL, PREMIUM PRO

(for the highest quality), PLANETA-AH

(low weight), PMH and PLX-II

(as a standard model) hoists provide

safe lifting, pulling and securing for

load bearing capacities of up to 9 t.

This is virtually unique in the hoist

market.

Chain hoists

PLANETA pulley hoists are

always used if there is no

power supply (e.g. during

maintenance tasks) or if

acquiring a motor-driven hoist

does not make sense from an

economic perspective, as it

will only be used occasionally.

Our product range includes

the established PLM-II and thePREMIUM PRO for load bearing

capacities of up to 30 t.

Grip puller

PLANETA-Ropemasters for up

to 5400 kg have been used

for many years in structuraland civil engineering,

open line construction and

in forestry to pull and secure

loads.

Beam clamps

The BK beam clamp and the BR

roller clamp are suited as mobile

attachment points on assemblies;

the BR design is also suited as a

trolley for up to 10 t.

The galvanised spindle guarantees

a long service life.

Trolleys

Regardless of whether you choose

the standard PT/GT design, the

strengthened L series or the pulley

hoist-trolley combination for the

lowest construction heights,

PLANETA trolleys provide the

safety, quietness and flexibility tomeet your requirements.


7/88


8/88

SeilzuggertLever hoist

6

Safety brakewith two pawls

Drop-forged load hookwith closed and fitting

safety latch

Chromedsteel plate housing

Large, non-sliphand wheel

Extra-secure handle

Chain end piecewith robust nylon design

Integratedchain guide

Reversing leverwith free-

running mode

Tempered andgalvanized load chainacc. DIN EN 818-7-T

Option:Overload protection


9/88

Seilzuggert

1

7

Lever hoist

Lever hoist PLANETA PREMIUM PROThe next development stage of the reliable PREMIUM lever hoist is the PREMIUM PRO.

Thanks to a significant weight saving, handling is improved. Despite this, the frame has been

strengthened compared to the previous generation.Proven quality also ensures longevity and its design makes it very robust.

Free-running mode

When the selection switch is moved to the middle point, the unladen chain can easily bepulled through the device freely to the required usage length.

This makes tensioning the chain easier.

Load chain

The tempered, galvanised load chain according to DIN EN 818-7-T is supplied with the unit.The standard lifting height is 1.5 m; any length required for higher lifting is possible.

New chain end piece

The robust chain end piece provides additional safety because it cannot be pulled through

the device with the chain.

Protected handle

The ergonomic rubber handle on the end of the lever protects the useragainst injury and is also screwed in place to prevent it slipping.

Technical advantages

Hand lever can be used in any position thanks to the ratchet; safety automatic

mechanical brake; galvanised connecting parts; cast hook clip; large, non-slip andclosed hand wheel; safety chain end piece.

PREMIUM PRO

6 t

Options: Also in -design

With overload protection

PREMIUM PRO1.5 t

TYPE PREMIUM PRO 0,75 1,5 3 6 9

Capacity t

Standard lift m

Min. headroom (A) mm

Lever force daN

Number of chain falls

Chain size mm

B (Dimensions) mm

C mm

D mm

E mm

E1 mm

F mm

G mm

Weight with standard lift kg

Weight for 1m additional lift ing height kg

0.75

1.5

320

22

1

5.6 x 17

115

239

35

35

23

91

146

5.3

0.7

1.5

1.5

360

24

1

7.1 x 21

137

259

42

38

28.5

67

162

8.6

1.1

3

1.5

431

33

1

9 x 27

169

374

48

46

33

98

187

15.2

1.8

6

1.5

500

36

2

9 x 27

238

374

60

59

39

98

187

23

3.6

9

1.5

635

38

3

9 x 27

300

374

70

54

51

98

187

43

5.4

PREMIUM PRO ... with 1,5 m lift Order N o. G10290 G10291 G10292 G10293 G10294

Additional 1m lift Order No. G10086 G10087 G10249 G10254 G10256

0.75 3 t 9 t


10/88

Only285mm

PMH 500

FlaschenzugLever hoist

8

Mini lever hoist PLANETA PMH

The new PLANETA PMH mini lever hoist impressesdespite its low net weight and minimal size for

professional use in smaller load ranges. It is the ideal

appliance for assembly tasks, in industry, in trade or

in the service area.

It can be used for lifting, pulling, aligning and stretchingin any location and in any direction.

Steel housingThe closed housing is made of steel plates, is extremely

robust and protects the chain drive against dirt.

BrakeThanks to the integrated automatic mechanical brake,

the load is held completely securely in all positions.

Hooks

The carrying and load hooks made of forged steelare fully rotatable and equipped with spring-loaded

safety clips.

Load chainTempered and galvanised load chain according to

DIN EN 818-7-T.

Chain free-running modeBy quickly reversing the selection lever to the middle

setting, the chain can be pulled through freely with

minimal effort.

Hand leverThe rubberised hand lever protects against injuries tohands and enables loads to be lifted and lowered easily.

Storage bag

A practical nylon bag with a belt strap is supplied with

the unit.

TYPE PMH 250 PMH 500

Capacity kg

Standard lift m


Lever force daN

Chain size mm

B (Dimensions) mm

C mm

D mm

E mm

F mm

G mm

H mm

J mm


Weight for 1 m add. lifting height kg

250

1.5

245

26

4 x 12

86

170

32

23

97

77

155

79

2.2

0.35

500

1.5

285

26

4 x 12

95

170

36

24

117

80

178

87

3.2

0.35

PMH ... with 1,5 m lift Order No. G10028 G10029

Additional 1 m lift Order No. G10007 G10007

Only245mm

PMH 250

The PMH can be carried easily onthe belt and is always to hand.


11/88

Preciselychain guide

All external partsgalvanic zinc plated

PLX-II 1.5 t

PLX-II 6 t

Forged safety hookswith accurately fitting

hook clips

0.75 3 t 6 t

PLANETA PLX-II lifting and anchoring device

The PLANETA PLX-II lever hoist is an extremely versatilelifting and anchoring device but is easy to handle.

It is used in the industrial area, in commercial transport, as an

aid during assembly and in construction and the trades.

This device stands out thanks to the high quality of serial production

and its long service life even if operational demands are high.

Simple free-running modeWhen the selection switch is moved to the middle point, the unladen

chain can easily be pulled though the device freely.

New chain end pieceIn the unlikely case of a brake failure, this serves as an additionalsafety device because it cannot be pulled through the device with the

load chain and therefore the load is held reliably.

Connecting partsGalvanised screws, nuts and bolts prevent corrosion, even if

used outdoors.

Rotatable hooksThe forged carrying and load hooks made of heat-treated, tempered

steel are fully rotatable and equipped with spring-loaded, galvanised

hook clips.

TYPE PLX-II ... 0,75 1,5 3 6

Capacity tStandard lift m


Lever force daN


Chain size mm

B (Dimensions) mm

C mm

D mm

E mm

E1 mm

F mm

G mm


Weight for 1 m add. lifting height kg

0.751.5

340

20

1

6 x 18

135

296

37

26.5

21

150

90

6.5

0.7

1.51.5

360

26

1

7.1 x 21

160

420

37

33

27.5

170

98

10

1.1

31.5

480

38

1

10 x 30

210

420

47

40.5

34

190

105

18.5

2.2

61.5

600

39

2

10 x 30

250

420

69

47

42

190

105

33

4.4

PLX-II... with 1,5 m lift Order No. G10230 G10231 G10232 G10233

Additional 1 m lift Order No. G10009 G10068 G10011 G10012

1

9

Lever hoist


12/88


13/88

1

Manual chain hoist

11

Safety brake

The reliable disc brake holds the load in any position after the

lifting or lowing process is complete. Of course, the brake discs

are free of asbestos.

Housing

Even in harsh conditions, dust and dirt have no chance.

The brake and pawls are well protected.

Hooks

Forged carrying and load hooks made of heat-treated, tempered

steel. Cast hook clips that are galvanised and spring-loaded

prevent lifting gear slipping.

Options:

Short model as a combination of chain hoist PREMIUM PROand trolley

Chain bag as an accessory

Also available with GL (Germanischer Lloyd) certification!For shipyards, ships and the chemical industry.

-Design

Safety brake withtwo pawlshold the load in any

position safely!All parts corrosion

protected!

Standard overloadprotection

(over 500 kg)

Chain mounting forlower terminal link

Tempered andgalvanized

load chain acc.DIN EN 818-7-T

Swivelling topand bottomhook

Chrome platedhousing forbest corrosionprotection

High qualityspur gears

Ball bearingmountedsprocket shaft

New casthook clips


14/88

Seilzuggert

PLANETA PLM-IIThe manual chain hoist PLANETA-PLM-II is our valued price alternative

to many hoists on the market. It complies fully with all relevant

International standards and the CE-regulations for Europe. Its solid design

and easy way of handling made him many friends through the last years.

You will find PLM-II in many kinds of industry, shipyards, on cranes and

also for maintenance.

Safety brake

The large sized safety brake works instantly when operation is stopped,

holding the load safely in any position.

Reliable material

The housings are made of steel, the hook holder and sheeves are of

cast steel. This makes PLM-II robust and sturdy.

Swivel hook

Top and bottom hook are out of tempered high tensile steel. They have

spring loaded, galvanized safety latches with side bending protection.

Luxery rust protectionScrews, nuts, discs, washers, bolts, the complete middle section and

the chains are galvanized to offer a reliable corrosion protection.

All other steel parts are painted or powder-coated

with our best blue finish. Top quality load chain accords to

DIN EN 818-7-T and shines zinc galvanized.

0.5 - 1.5 t 2 - 5 t

Completely zinc platedinternal housing

PLM- II 5 t

PLM- II 1 t

Die-forged safety hookwith locking safety latch

Manual chain hoist

12

TYPE PLM-II... 0,5 1 1,5 2 3 5

Capacity t

Standard lift m

Min. Headroom (A) mm

Hand chain force daN

Hand chain operation length m

Number of Chain falls

Chain size mm

B ( Dimensions) mm

C mm

D mm

E mm

E1 mm

Weight with 3 m lift kg

Weight for 1 m additional lift kg

0.5

3

295

22

2.5

1

5 x 15

122

108

32

18.5

15

8

1.2

1

3

310

30

2.5

1

6 x 18

146

122

38

24.5

19.5

11

1.7

1.5

3

390

34

2.5

1

8 x 24

178

139

42

29.5

22

15

2.3

2

3

410

31

2.5

2

6 x 18

142

122

45

31

26.5

14

2.5

3

3

480

34

2.5

2

8 x 24

178

139

50

33

30

25

3.7

5

3

600

38

2.5

2

10 x 30

210

162

65

45.5

40.5

36

5.3

PLM-II... with 3 m lift Order No. G10235 G10236 G10237 G10238 G10239 G10240

Additional 1 m lift Order No. G10241 G10242 G10243 G10244 G10245 G10246

Chain bag (plastic) up to 3 m lift Order No. H10057 H10057 H10059 H10058


15/88

13

1

13

Grip puller

Greifzug T508 - T532 in Leichtbauweise

PLANETA Aluminium ROPEMASTERThe housing is made of corrosion resistant lightweight durable

aluminium die cast. This makes the hoist very robust and light

enough to carry it around the job. We supply the puller completewith lever and spare overload protection pins, stowed

conveniently inside the cap of the lever grip or carrying handle.The wire rope, wounded on a reel with hook, is optional.

Versatile

Cranes lift, winches pull, lever hoists span and tie.

A PLANETA - ROPEMASTERis all in one! Three capacities

up to 3.2 tons are offered and if you need more power,then wire rope blocks can multiply the force. See the picture

below how 10 tons can be moved! Please ask us for sheaves.

Simple operation

The unloaded ROPEMASTER allows you to pull the rope throughthe body quickly and to the right distance. Now anchor your

ROPEMASTER safely! The long rope provides lots of play. Put thelong lever pipe on handle 1 for pulling, on handle 2 for lowering.Simply pump the lever. Whenever you stop, the load will be held

safely. Its that easy!

Overload protected

Protection pins in handle 1 break if the load is too high. No more

pulling or lifting is possible then. But the break function is stillactive. Just replace the pin quickly without unloading the puller.

RM08

RM16RM32

2-part lever for RM32

TYPE RM08 RM16 RM32 RM54

Capacity kg

Rope movement per lever action mmLever force at full load daN

Lever length mm

Rope diameter mm

Weight of rope kg/m

Standard rope length m

B (Dimensions) mm

B1 mm

H mm

H1 mm

L mm

Weight without rope kg

Weight with rope and lever kg

800

6024

800

8.5

0.29

20

60

168

240

430

7

16

1600

6030

1200

11

0.53

20

72

97

190

270

545

14

28

3200

4050

1200

16

1

20

91

110

230

330

680

21

52

5400

2585

1200

20

1.65

20

116

150

280

390

830

61

95

RM Puller without rope Order No. G10100 G10101 G10102 G10114

RM Puller with 20 m rope Order No. G10103 G10104 G10105 G10115

Guide roller Order No. D01160 D01162 D01162 D01169

RM08 with rope

10 t


16/88


17/88

Seilzuggert

1

Trolleys

15

Push trolley L87-106

Gear type trolley L87-107

L87-Trolleys

L87-trolleys are manufactured in a higher quality for a very rough and unusual use.

The chain hoists PREMIUM PRO, PLM-II and PLX-II of the same capacity as the trolley fit

easily into the lugs with their top hook, but these L87-trolleys are best combined with

PREMIUM PRO. Trolleys have rubber buffers at both sides!

Ball bearings

There are life-time lubricated ball bearings of high quality with seals inside the cast

iron wheels. Their ball shaped surfaces offer a smooth and quiet run on any beam flange

construction.

Wide adjustment for any flange width

Discs of different thicknesses are on the carrying bolts that allow to make the distance

between side plates shorter or longer by exchanging them from outside to inside.

There are two main bolt lengths. The standard bolts are adjustable for normal width.

Bolts of size 2 offer more possibilities up to beam flange sizes on HE-B-beams with

300 mm width. Prefer this when unclear for what kind of work you will use them.

Double safety

Climb stop on both side of the beam flange hinders the trolley to climb up thebeam and prevents from falling down. Right angled side plates work as wheel shaft

breakage protection, falling down protection and beam flange cleaner.

Sturdy side plates

The load is balanced by two carrying bolts on all four wheels because the castle nuts

tie only one side. This gives the bolts a bit of tolerance for movement and equalizes

unproper beam flanges.

More capacities upon request.

L87-106 L87-107

TYPE Push trolley L87-106...

TYPE Gear type trolley L87-107...

0,5

0,5

1

1

2

2

3

3

5

5

10

16

20

Capacity t

Flange width M min. - max. L87-106 and 107 mm

Min. curve radius m

Hand chain operation length L87-107 m

A (Dimensions) mm

A1 mm

B mm

C mm

D mm

E mm

H mm

J mm

S mm

F mm

Weight L87-106 kg

Weight L87-107 kg

0.5

50 203

0.8

2.5

286

272

194

158

54

79

75

95

30

2

6

10

1

64 203

0.9

2.5

303

334

236

196

68

95

96

110

38

2

11

14

2

88 203

1

2.5

317

343

268

226

77

108

110

123

38

2

18

22

3

100 203

1.2

2.5

333

357

322

266

100

131

122

144

40

3

30

34.5

5

114 203

1.3

2.5

355

373

362

301

106

145

142

156

42

3

44

47

10

124 203

1.5

2.5

423

442

356

131

176

190

200

45

3

88

16

136 203

3.5

2.5

498

555

498

236

65

3

163

20

136 203

3.5

2.5

501

555

498

233

58

3

165

L87-106 Order No. G20100 G20101 G20102 G20103 G20104 L87-107 w/ 2.5 m operation lengthOrder No. G20105 G20106 G20107 G20108 G20109 G20110 G20176 G20129

Larger flange width min. - max. mm

Order No.

64 305

G20111

64 305

G20112

88 305

G20113

100 305

G20114

114 305

G20115

124 305

G20116

136 305

G20149

136 305

G20139

Add. hand chain operation length/m Order No. G20117 G20117 G20117 G20117 G20117 G20117 G20150 G20117


18/88


19/88

HD3N-Trolleys

Zinc plated design

HD3N-trolleys have outstanding corrosion protection.

All steel parts are electrolytically zinc plated. This is a must

in wet rooms and in very aggressive environment.

Larger flange width (size 2 - 4) are optional. Wheels fit flat

and also tapered flanges!

Capacities up to 25 t on request.

HD3N-H-VZ

1m more operation length Order No.

Standard zinc plated (2.5 m total) G20118

TYPE Push trolley HD3N-H-VZ...

TYPE Gear type trolley HD3N-G-VZ...

0,5

1

1

2

2

3,2

3,2

5

5

6,3

6,3

8

8

Capacity t

Maximum weight of hoist kg

Flange width b min. / max. Size 1 mmmin. / max. Size 2 mm

min. / max. Size 3 mm




Min. Curve radius m

A ( Dimensions) mm

B mm

C mm

D mm

E mm

F mm

G mm

H mm

L mm

M mm

N mm

O mm

W Size 1 mm

Size 2 mm

Size 3 mm

Size 4 mm

R mm

Weight HD3N-H-VZ kg

Weight HD3N-G-VZ kg

0.5

100

55/102105/152

2.5

1

45

60

15

52

15

45

30

125

150

160

210

75

3

1

120

55/102105/152

156/203

207/254

10

2.5

1.5

60

75

18

60

20

60

30

150

190

65

90

100

170

220

270

325

99

5

6

2

250

74/127127/180

190/243

254/305

16

2.5

1.6

80

100

22

75

27

80

35

195

255

65

90

100

215

265

330

390

123

11

12

3.2

150

90/143149/203

203/254

251/305

25

2.5

2

100

120

25

90

35

100

40

235

300

70

95

100

250

310

360

410

144

18

19

5

300

106/156160/210

210/260

255/305

20

2.5

2.9

125

150

30

117

40

120

60

295

375

100

130

135

275

330

380

425

174

33

35

6.3

200

106/156160/210

210/260

255/305

25

2.5

2.9

125

150

30

117

40

120

60

300

375

100

130

135

275

330

380

425

174

35

36

8

550

Fix

(119 min.)

16

2.5

3.5

160

190

35

145

45

145

80

365

450

115

135

270

b + 150

220

85

90

HD3N-H-VZ Order No. G20230 G20231 G20232 G20233 G20234 G20235 G20236

HD3N-G-VZ with 2.5 m operation length Order No. G20237 G20238 G20239 G20240 G20241 G20242

Larger Flange width size 2 - 4 Order No. G20243 G20244 G20245 G20246 G20247 G20248

Many special version upon request.

NIROSTA - trolleys up to 3 t

Bogie trolleys up to 10 t

Rack gear trolleys up to 12.5 t Person transporting trolleys - acc. EN 1808up to 4 t capacity

HD3N-G-VZ

1

17

Trolleys


20/88

Low headroom trolley hoist

18

Combined power

Saving headroom

The very best manual chain hoist

PLS PREMIUM and a trolley L87 are put

together in an integrated combination to

save headroom. That means the distance

between load point of hook and bottomof beam flange. This is very important

if rooms are low or space is narrow.

Halls can be build smaller what saves costs.

Or if the clearance in older buildings is

too narrow for standard hoists - this is

the solution!

Advantages of trolley hoist

shortens downtime in ships

enables low cost bridge cranes

labor saving during repair andmaintenance works.

optimal space utilisation

Low headroom trolleyhoist LHT

The close combination of hoist and trolley

with low headroom offers a unit that is

both functional and versatile. There is less

time spent messing with equipment and

money is saved.

The LHT-line uses the quality advantages

of the PREMIUM manual chain hoists

(see also page 10).

The smoothly moving and operation on ball

bearings plus a perfectly finish of surface

protection offers the user an uncomparable

reliability. The standard equipped overload

protection fulfills even the high demands on

ocean going vessels.

Standard version: PREMIUM chain hoist with 3 m lift and

2.5 m hand chain operation length

Available as manual push trolley

(TYPE -H) or geared trolley (TYPE -G)

A contour trolley wheel design provides

maximum beam contact on flat or

tapered beams. Tilting and climbing

protection according CE-regulations are

self-evident.

Options (on request):

Chain case (what is very unusual

for manual chain hoists) for down-

hanging loose chain that may

cause trouble in some cases.

For corrosive environments,

completely zinc plated surfaces

are also available for the trolley

Special non-corrosive and

non-sparking steels for chain

Special options

Special- Ex-protection with bronze partsand galvanizations, chain collector,

overload limiter, beam parking brake.

LHT-H = Chain hoist in push trolley

LHT-G = Chain hoist in gear type trolley

Dimensional drawing LHT-G (with gear type trolley)

0.5 - 3 t 5 t

10 t 15 t

Low headroomtrolley in a specialconstruction withbeam fixing device.It keeps the trolley

in position whileship rolls.

LHT-G 010L


21/88

TYPE LHT...-H/-G 005L 010L 015L 020L 030L 050L 075L 100L 150L 200L

Capacity t

Standard lift m


Chain size mm


Flange width M min.-max. (M) mm

Min. curve radius mDimension H min. LHT-H mm

Dimension H min. LHT-G mm

B mm

C mm

S mm

Z mm

F mm

Weight with 3 m lift LHT-H kg

Weight with 3 m lift LHT-G kg

0.5

3

1

5 x 15

299

50 - 152

0.85

236

272

258

385

30

7.5

3

15

19

1

3

1

6.3 x 19

331

64 - 203

1

303

334

292

451

37

10.5

3

24

28

1.5

3

1

8 x 24

424

88 - 203

1.1

317

343

358

551

38

12

3

46

44

2

3

1

8 x 24

424

88 - 203

1.1

317

343

358

551

38

12

3

46

44

3

3

1

10 x 28

486

100 - 203

1.3

333

356

434

633

40

14

3

61

65

5

3

2

9 x 27

636

114 - 203

1.4

355

373

448

808

42

15

3

86

91

7.5

3

3

9 x 27

760

124 - 203

2

372

416

628

965

45

16

3

130

135

10

3

4

9 x 27

780

124 - 203

2

378

423

636

990

45

17

3

147

153

15

3

6

9 x 27

930

136 - 203

3.5

449

498

757

1130

56

20

3

278

286

20

3

8

9 x 27

965

136 - 203

3.5

449

498

891

1165

58

25

3

331

353

LHT-H with 3 m lift Order No. G20050 G20051 G20052 G20053 G20054 G20055 G20056 G20057 G20058 G20059

Add. lift / m (LHT-H) Order No. G20070 G20071 G20072 G20073 G20074 G20075 G20076 G20077 G20078 G20079

LHT-G with 3 m lift Order No. G20060 G20061 G20062 G20063 G20064 G20065 G20066 G20067 G20068 G20069

Add. lift / m (LHT-G) Order No. G20080 G20081 G20082 G20083 G20084 G20085 G20086 G20087 G20088 G20089

Larger flange min. - max. mm

width (M) Order No.

50 - 203

G20090

64 - 305

G20091

88 - 305

G20092

88 - 305

G20093

100 - 305

G20094

114 - 305

G20095

124 - 305

G20096

124 - 305

G20097

136 - 305

G20098

136 - 305

G20099

Chain bag * Order No. H10057 H10058 H10058 H10059 H10059

* Flange width to be advised with order! The flange width will be fix and is not adjustable afterwards! Data in chart show only a range of recommendation.

TYPECapacity

t

Hand force

daN

Beam *

mm

Min. Headroom

G mm

Weight (kg) Order No.

with 3 m lift

Order No.

Add. lift per mcomplete 3 m Meter lift

PKB 10

PKB 20

PKB 32

PKB 60

PKB100

PKB120

1

23.2

6

10

12

24

33.538

43

40

40

74-300

90-300106-300

119-300

134-300

134-300

125

150170

285

270

270

40

120150

300

400

400

1.7

23

5

11

11

G20260

G20261

G20262

G20263

G20275

G20278

G20264

G20265

G20266

G20267

G20276

G20279

TYPE

Dimensions

Amm

Bmm

Cmm

Emm

Fmm

F1mm

Rmm

Lmm

Nmm

Umm

Omm

nmm

PKB 10

PKB 20

PKB 32

PKB 60

PKB100

PKB120

80

100

125

160

160

160

100

120

150

190

220

220

22

25

30

35

35

35

20

20

26

33

35

35

36

42

48

75

50

50

29

34

39

68

43

43

226

266

310

430

600

600

500

600

685

965

1070

1070

140

145

175

225

223

223

105

150

150

200

196

196

100

135

135

300

300

300

2500

2500

2500

2500

2500

2500

* Chain bag (plastic) up to 3 m lift

1

19


The manual powered PKB is a very

compact lifting equipment that combines

an integrated chain hoist with a gearedtype trolley. The important fact is that the

load hook can be lifted up directly under

the beam flange.

Quality

A solid steel construction with satisfactorily

hoist component.

Standard version

Ball contoured wheels for flat and tapered

beam flanges. High tensile and galvanizedload chain acc. DIN EN 818-7-T. Hand

chain is also galvanized. Standard lift 3 m

and hand chain operating length 2.5 m.

Complete with multi-paged operation and

testing manual.

Special options

Special- -protection with bronze parts

and galvanizations, chain collector,

overload limiter, beam parking brake.



22/88

SUPER-Low combined trolley hoist

20

Lifting and driving by SUPER-LO HPR

Compact

The manual powered SUPER-LO HPR is a very compact lifting

equipment that combines an integrated chain hoist with a geared

type trolley. The important fact is that the load hook can be lifted

up directly under the beam flange.

No swing of load

This special development of a combined trolley hoist has two lifting

gears, one at each side of the girder. They lift the load fully

synchronized with two parallel operating load chains what hinders

the attached load to swing. It is different from other models on

the market with only one gear and one chain that goes from one

beam side through the suspension device to the other trolley side.

SUPER-LO HPR places your load softly and precisely on the spot.

That is an important advantage in machinery rooms of ships i.e.

during pulling of motor pistons.

Fast

Lifting is done with very little hand force! The gears have a high

ratio. It enables SUPER-LO HPR to be your first choice when only

very little headroom is available and one man shall do the work!

Quality

It is a solid and robust device made from best steel with machined

sprocket wheels, ball bearing wheels and high tensile load chain.

Anti-fall and antirocking systems are included of course.

Standard versionBall contoured wheels for flat and tapered beam flanges!

Standard lift 3 m and hand chain operating length 2.5 m.

Special options

Special- Ex-protection with bronze parts and galvanizations,

chain collector, overload limiter, beam parking brake.

* Flange width to be advised with order! The flange width will be fix and is not adjustable afterwards! Data in chart show only a range of recommendation.

TYPE

HPR...

Capa-city

t

Handforce

daN

Beam (mm) Min.Curveradius

m

Min.Head-roomH mm

Weight (kg) Dimensions Order

No.with

3 m lift

Order

No.add. liftper m

Order

No.Overload

limiterHeight

mmFlange

width* mmCompl.

3 mMeter

liftL

mmP

mmG

mmWmm

Umm

Bmm

Emm

Fmm

010

020

040

050

063

080

100

120

150

180200

240

1

2

4

5

6.3

8

10

12

15

1820

24

28

28

30

38

41

30

37

45

36

4436

45

72

72

102

102

157

157

157

157

180

180180

180

50-300

50-300

82-300

82-300

125-300

125-300

125-300

125-300

125-300

125-300125-300

125-300

4

4

5

5

10

10

10

10

14

1414

14

105

152

175

195

220

245

245

280

300

340340

370

63

70

115

116

260

295

295

305

540

560580

590

4

5

7

7

8

12

12

12

17

1721

21

445

445

487

487

755

755

755

755

937

937937

937

220

220

295

295

490

490

490

490

532

532532

532

134

134

148

148

208

208

208

208

290

290290

290

265+b

265+b

295+b

295+b

320+b

320+b

320+b

320+b

505+b

505+b505+b

505+b

190

190

220

220

350

350

350

350

365

365365

365

70

70

100

100

155

155

155

155

170

170170

170

30

30

30

40

40

50

50

58

58

7575

80

85

85

139

174

174

174

174

192

192

192192

G20200

G20201

G20202

G20203

G20204

G20205

G20206

G20207

G20208

G20209G20210

G20211

G20212

G20213

G20214

G20215

G20216

G20217

G20218

G20219

G20220

G20221G20222

G20223

G20224

G20224

G20224

G20225

G20225

G20225

G20225

G20226

G20226

G20226G20226

G20226


23/88

Kurze Kombikatze

21

Beam clamp and trolley

1

TYPE BR... 10 20 30 50

Capacity t

Grip range min. mm

Grip range max. mm

Curve radius m

B min. (Dimensions) mm

D max. mm

E max. mm

J mm

Weight kg

1

64

203

1.1

105

324

340

174

7

2

76

203

1.3

111

387

340

174

20

3

76

203

1.4

127

438

345

280

32

5

100

305

1.5

135

528

465

345

53

BR Order No. F00042 F00036 F00037 F00039

TYPE BK... 10 20 30 50 100

Capacity t

Grip range A min. mm

Grip range A max. mm

B min. (Dimensions) mm

B max. mm

C mm

D mm

E mm

F min. mm

F max. mm

G min. mm

H mm

Weight kg

1

75

230

180

375

80

5

220

102

160

29

20

4

2

75

230

180

375

90

5

220

102

160

28

22

5

3

80

320

220

498

117

8

271

168

240

60

24

9

5

90

320

220

498

127

10

271

168

240

57

30

11

10

90

320

250

514

139

16

280

172

242

55

40

18

BK Order No. F00031 F00032 F00033 F00034 F00035

PLANETA Beam clamp BK

Type BK

Type BR

Mobile attachment device

The girder clamp BK is a simple and safe

load attachment tool. Its easy two-stepoperation makes it ideal for urgent tasks

and assembly jobs. Twist and open the

spindle to the width of the beam flange, pushover the flange and close tightly. The clamp

can also be used for the lifting and transfer

of steel beams and as a pulling clamp.

See the picture! So they are the idealtools for erection and installation works as

they fit any beam type. Rapid preparations

are possible for the lifting equipment thatsaves your time and money.

No more improvised attachment points!

Get safer and reliable with BK!

FeaturesThe frame of the Beam Clamp is madefrom solid steel plates and the spindle is

made from high tensile galvanized steel that

normally forgives a strong tightening.

PLANETA Trolley BR

Trolley BR = clamp on wheels

The grip trolley type BR with its integratedpush trolley is used as a helper for all kind

of mounting, assembly and erection work.

While the clamp BK is fixed at one place,

this attachment point for hoists can travelalong the beam. The system works with

the same concept of our PTM trolley with

the added bonus, that it can be moved fromone beam to another by a simple and easy

twist of the spindle. When it is installed on

the next beam, a crowned counter nut locks

the spindle. Any beam profile type like INP,

HE and HE-B can be served. The mechani-cally machined steel rollers and the closed

ball bearings are permanently lubricated.The spindle is protected against corrosion

by zinc galvanization.


24/88

Manual lifting applications

22


25/88

23

2


26/88

24

Explosion protection informationAccording to ATEX Directive 95 (Directive 94/9/EC), as of

01/07/2003, manufacturers are obligated to produce hoists

in accordance with the applicable rules, standards and

regulations for explosion-protected operating materials,

classified by Ex class and identified accordingly.

The customer must specify either a classificationor an Ex zone.

When we have received this information, we can present you

with a suitable quotation for the hoist you are interested in.

Here is an overview of the classification of explosion-protected

operating materials according to Directive 94/9/EC, to serve

as a guide. The standards, regulations and directives of the

appropriate authority, e.g. chemicals industry associations,

regarding the use of equipment in areas at risk of explosion,

must be observed by the owner during installation, assembly and

operation of >> EX-protected hoists T2

--------------------------------- >T3

------------------------------------------------->T4

----------------------------------------------------------------- >T5

--------------------------------------------------------------------------------- >T6

24

Explosion protection


27/88


28/88

26

-proof manual chain hoists

PLS EX

PLS PREMIUM with EX-protectionThe PLS PREMIUM-EX gets a very special surface treatment and has

some changes in design that allows you to use the manual chain hoist

in explosion hazardous areas. It accords to EC-guide lines 94/9/EG

(ATEX-standards).

Three explosion clases are specified. We offer the versions

Basic, Medium and High. Please ask us for more detailedinformations in case of doubts.

All around galvanization and chromatation

Mud and dirt cannot harm this hoist! This protection begins with self-

locking galvanized castle nuts, goes over bronze wheels and rustfree

chains and ends with fully chromated housing parts. Overload protection

in 0.5 t capacity hoist and bigger, supplied with ATEX-Certificate!

1 m more operation length Capacity Order No.

Hand chain Basic/Medium

Hand chain High

0.5 - 10 t

0.5 - 10 t

G50032

G50033

0.25 3 t 5 t 10 t

TYPE PLS-EX... PLS PREMIUM with EX-protection Versions Basic/Medium/High

Capacity Basic/Medium t

Capacity High t

0.25

0.25

0.5

0.5

1

1

1.5

1.25

2

1.25

3

2

5

3.2

10

6.4




Chain size mm

Min. Headroom (A) mm

B (Dimensions) mm

C mm

D mm

E mmN m

F mm

F1 mm


Weight per m additional lift kg

12

2.5

1

4 x 12

270

47

69

52

652.5

30

20

6

1

25

2.5

1

5 x 15

350

49

89

50

962.5

30

23

10

1.2

28

2.5

1

6.3 x 19

383

59

95

63

982.5

40

27

12

1.5

31

2.5

1

7.1 x 21

442

76

100

75

1072.5

45

33

17

1.7

29

2.5

1

8 x 24

485

77

100

87

1152.5

50

35

19

2

37

2.5

1

10 x 28

554

85

120

105

1502.5

55

39

35

2.8

37

2.5

2

9 x 27

688

89

100

90

1602.5

65

45

41

3

38

2.5

4

9 x 27

765

89

100

150

3102.5

75

54

78

4.2

Version Basic:

PLS-EX with 3 m liftOrder No. G50000 G50001 G50002 G50003 G50004 G50005 G50006 G50007

Version Medium:

PLS-EX mit 3 m liftOrder No. G50008 G50009 G50010 G50011 G50012 G50013 G50014 G50015

Add. lifting height per m

Basic / MediumOrder No. G10048 G10049 G10050 G10051 G10052 G10053 G10054 G10055

Version High:

PLS-EX with 3 m lift Order No. G50016 G50017 G50018 G50019 G50020 G50021 G50022 G50023

Add. lifting height per m

HighOrder No. G50024 G50025 G50026 G50027 G50028 G50029 G50030 G50031

Chain bag up to 3 m lift* Order No. H10057 H10057 H10058 H10058 H10059 H10059

* Chain bag (plastic) up to 3 m lift. Chain bag up 6 t (steel plate) on request.


29/88

27

-proof applications

2


30/88

28

-proof trolleys

L87-Trolleys

L87-trolleys are manufactured in a higher quality for a very

rough and unusual use. The trolleys have outstanding corrosion

protection. All steel parts are electrolytically zinc plated.

The chain hoists PLS PREMIUM-EX of the same capacity as

the trolley fits easily into the lugs with their top hook.

Trolleys have rubber buffers at both sides!

Ball bearings

There are life-time lubricated ball bearings of high quality with

seals inside the cast iron wheels. Their ball shaped surfaces offer

a smooth and quiet run on any beam flange construction.

Wide adjustment for any flange width

Discs of different thicknesses are on the carrying bolts that

allow to make the distance between side plates shorter or

longer by exchanging them from outside to inside.There are two main bolt lengths. The standard bolts are

adjustable for normal width. Bolts of size 2 offer more

possibilities up to beam flange sizes on HE-B-beams with

300 mm width. Prefer this when unclear for what kind of work

you will use them.

Double safety

Climb stop on both side of the beam flange hinders the trolley

to climb up the beam and prevents from falling down.

Right angled side plates work as wheel shaft breakage

protection, falling down protection and beam flange cleaner.

Sturdy side plates

The load is balanced by two carrying bolts on all four

wheels because the castle nuts tie only one side.

This gives the bolts a bit of tolerance for movement and

equalizes unproper beam flanges.

EX-protection version

Trolleys for use in environments with explosion danger

(so-called ex-proof areas) are equipped with special treated

wheels and sparkfree hand chains for EX-areas up to

Zone 1 II 2 G IIC T4. The trolleys accord to EC-Machine

Directive 94/4/EG (Atex-guide lines).

TYPE Gear type trolley L87-107-EX... 0,5 1 2 3 5

Capacity tFlange width M min. - max. mm

Min. curve radius m

Hand chain operation length L87-107 m

A (Dimensions) mm

A1 mm

B mm

C mm

H mm

S mm

F mm

Weight L87-107-EX kg

0.550 203

0.8

2.5

286

272

194

158

75

30

2

10

164 203

0.9

2.5

303

334

236

196

96

38

2

14

288 203

1

2.5

317

343

268

226

110

38

2

22

3100 203

1.2

2.5

333

357

322

266

122

40

3

34.5

5114 203

1.3

2.5

355

373

362

301

142

42

3

47

L87-107-EXwith 2.5 m operation length Order No. G20250 G20251 G20252 G20253 G20254

Larger flange width min. - max. mm

Order No.

64 305

G20111

64 305

G20112

88 305

G20113

100 305

G20114

114 305

G20115

Additional hand chain operation length/m Order No. G20117 G20117 G20117 G20117 G20117

More capacities upon request.

Gear type trolleyL87-107-EX


31/88

29

-proof trolleys

2

SUPER-Corrosion protection (Basic/Medium)HD3N-trolleys have outstanding corrosion protection. All steel parts are

electrolytically zinc plated. This is a must in wet rooms and in very

aggressive environment. Larger flange width (size 2 - 4) are optional.

Wheels fit flat and also tapered flanges!

Capacities up to 25 t on request.

EX-protection version (High)Trolleys for use in environments with explosion danger (so-called ex-

proof areas) are equipped with bronze wheels and sparkfree hand

chains for EX-areas up to Zone 1 II 2 G IIC T4.

The trolleys accord to EC-Machine Directive 94/4/EG

(Atex-guide lines).

Many special version upon request.

HD3N-H

HD3N-G-EX

Die Laufkatzenpreise verstehen s ich fr Flanschbreitenbere ich 1 bzw. Fes tma ab 8 t. Preise fr Sonderausfhrungen und Opt ionen auf Anf rage.

1m more operation length Order No.

Standard zinc plated (2.5 m total)

V2A (EX) rustfree (2.5 m total)

G20118

G20119

Person transporting

trolleys - acc. EN 1808

up to 4 t capacity Flame zinc plating

NIROSTA - trolleys up to

3 t (non-corrosive steel)

TYPE Push trolley HD3N-H...

TYPE Gear type trolley HD3N-G...

0,5

1

1

2

2

3,2

3,2

5

5

6,3

6,3

8

8

10

10

12,5

12,5

Capacity t

Maximum weight of hoist kg

Flange width b min. / max. Size 1 mm






Min. Curve radius m

A (Dimensions) mm

B mm

C mm

D mm

E mm

F mm

G mm

H mm

L mm

M mm

N mm

O mmW Size 1 mm

Size 2 mm

Size 3 mm

Size 4 mm

R mm

Weight HD3N-H kg

Weight HD3N-G kg

0.5

100

55/102

105/152

2.5

1

45

60

15

52

15

45

30

125

150

160

210

75

3

1

120

55/102

105/152

156/203

207/254

10

2.5

1.5

60

75

18

60

20

60

30

150

190

65

90

100170

220

270

325

99

5

6

2

250

74/127

127/180

190/243

254/305

16

2.5

1.6

80

100

22

75

27

80

35

195

255

65

90

100215

265

330

390

123

11

12

3.2

150

90/143

149/203

203/254

251/305

20

2.5

2

100

120

25

90

35

100

40

235

300

70

95

100250

310

360

410

144

18

19

5

300

106/156

160/210

210/260

255/305

20

2.5

2.9

125

150

30

117

40

120

60

295

375

100

130

135275

330

380

425

174

33

35

6.3

200

106/156

160/210

210/260

255/305

25

2.5

2.9

125

150

30

117

40

120

60

300

375

100

130

135275

330

380

425

174

35

36

8

550

Fix

(119 min.)

16

2.5

3.5

160

190

35

145

45

145

80

365

450

115

135

270

b + 150

220

85

90

10

600

Fix

(131 min.)

19

2.5

3.5

160

190

35

145

45

145

80

370

450

115

135

270

b + 150

220

90

95

12.5

150

Fix

(143 min.)

23

2.5

3.5

160

190

35

145

45

145

80

375

450

115

135

270

b + 150

220

95

100

Version Basic/Medium

HD3N-H Order No. G20120 G20121 G20122 G20123 G20124 G20125 G20126 G20127 G20128

Version High

HD3N-H Order No. G20130 G20131 G20132 G20133 G20134 G20135 G20136 G20137 G20138

Version Basic/Medium

HD3N-G with 2.5 m operation lengthOrder No. G20141 G20142 G20143 G20144 G20145 G20146 G20147 G20148

Version High

HD3N-G with 2.5 m operation lengthOrder No. G20151 G20152 G20153 G20154 G20155 G20156 G20157 G20158

Larger Flange width size 2 - 4 Order No. G20160 G20161 G20162 G20163 G20164 G20165

Flame zinc plating Order No. G20170 G20171 G20172 G20173 G20174 G20175 G20179 G20177 G20178

HD3N-G


32/88

Air chain hoists

30

Pneumatic air chainhoist LIFTMASTER TCR

The air chain hoist, why?

A hoist cannot be selected solely on

the basis of its lifting capacity. Ease of

operation, environment, intended use,

frequency of use and degree of speedcontrol are important factors that

need to be considered. The driving

force behind increased use of the LIFT-

MASTER in the industrial market place

is that a growing number of industries

are simply finding the many inherent

advantages of the LIFTMASTER.

Environment

The air chain hoist LIFTMASTER can

be operated in explosive atmospheres

and corrosive environments, becausethe air motor is inherently spark

resistant and also extremely resistant

to adverse external conditions.

Reliable, trouble free

Overloading will not damage the

motor because there is an automatic

switch-off over 1 t capacity. Whether

you are faced with constant stop-start

or continuous operation, you can

expect reliable performance.

Variable speed control

Infinitely variable speed control allows

for accurate and precise load position-

ing. You can inch loads into position or

increase the speed when accuracy is of

less importance.

Smooth starts & stops

Important for operator safety as

well as for reducing parts wear and

maintenance. Smoother operation leads

to less vibration, less stress on partsand a longer unit life.

Compact & lightweight

Small external dimensions and a light-

weight construction make the LIFT-

MASTER hoist ideal for close head room

situations and temporary installations.

Very economical

Approximately 1/3 of the cost of a wire-

rope hoist of the same capacity with

same features.Standard

Height of lift 3 m, Control length 2 m,

use up to EX-Zone IIA 3 GD c T4/T5/T6.

TCR 3000PwithPendant control

TCR 1000C2withRope control

Chain bag up 6 t (steel plate) on request.

In compliance with EX-Zone - ClassesEN 50 014 and newest EC-MachineryDirective 94/4/EG (ATEX- guide lines).

TYPE Order No.

Add. control length rope control / m

Add. control length pendant control / m

H10042

H10043

Pneumatic-Special-Oil Order No.

Content: 2.5 Liter H20566

TYPE LIFTMASTER TCR... 250C/P 500C/P 1000C2/P 1000C/P 2000C2/P 3000C/P

Capacity (Air pressure 6 bar - 1Bm) t

Lifting speed without load m/min

Lifting speed with full load m/min

Lowering speed without load m/min

Lowering speed with full load m/min

Air consumption with fu ll load l/sec


Air inlet R inch

Chain size (diameter) mm


0.25

20.5

10.5

13.4

17.9

25

1

1/2

6.3 x 19.1

31

0.5

20.5

10.5

13.4

17.9

25

1

1/2

6.3 x 19.1

31

1

10.3

5.3

6.7

9

25

2

1/2

6.3 x 19.1

34

1

11.3

6

6.8

10.3

25

1

1/2

7.1 x 21

35

2

5.7

3

3.4

5.2

25

2

1/2

7.1 x 21

40

3

5.4

2.8

3.3

4.6

33

1

1/2

11.2 x 34

69

TCR... with 3m Lift with

rope control Order No. H10001 H10002 H10003 H10004 H10005 H10006


pendant control Order No. H10015 H10016 H10017 H10018 H10019 H10020

Add. lift per meter Order No. H10029 H10029 H10030 H10031 H10032 H10033

Maintenance unit Order No. H10054 H10054 H10054 H10054 H10054 H10055

Add. air powered trolley DLKOrder No. H10044 H10044 H10044 H10044 H10045 H10046

Chain bag (plastic)

to 3 m lift Order No. H10057 H10057 H10058 H10058 H10058 H10059

TYPE LIFTMASTER TCR... 6-C2/P2 10-C2/P2 12-C4/P4 15-C5/P5 20-C4/P4 25-C2/P2

Capacity (Air pressure 6 bar - 1Bm) t

Lifting speed without load m/min

Lifting speed with full load m/min

Lowering speed without load m/minLowering speed with full load m/min

Air consumption with full load l/sec


Air inlet R inch

Chain size (diameter) mm


6

2.7

1.4

1.72.3

33

2

1/2

11.2 x 34

90

10

2.2

1.5

1.82.3

90

2

1

16 x 45

190

12

1.4

0.7

0.81.2

33

4

1/2

11.2 x 34

170

15

1.1

0.6

0.70.9

33

5

1/2

11.2 x 34

221

20

1.2

0.8

0.91.2

90

4

1

16 x 45

470

25

0.7

0.5

0.50.7

120

2

1

22 x 66

320


rope control Order No. H10007 H10008 H10009 H10010 H10011 H10012


pendant control Order No. H10021 H10022 H10023 H10024 H10025 H10026

Add. lift per meter Order No. H10034 H10035 H10036 H10037 H10038 H10039

Maintenance unit Order No. H10055 H10055 H10055 H10055 H10056 H10056

Add. air powered trolley DLKOrder No. H10047 H10048 H10049 H10049 H10050 H10051


33/88

31

Air chain hoists

2

Air powered trolley DLK

10 t

25 t

TYPE TCR... A B C D E H

TCR 250 C/P

TCR 500 C/P

TCR 1000 C2/P2

TCR 1000 C/P

TCR 2000 C2/P2

TCR 3000 C/P

342

342

342

342

342

449

156

156

156

156

156

202

149

149

180

157

194

245

52

52

47

40

50

47

29

29

29

29

29

34

462

462

519

466

580

580

TYPE TCR... A B C D E H

TCR 6 C2/P2

TCR 10 C2/P2

TCR 12 C4/P5

TCR 15 C5/P5

TCR 20 C4/P4

TCR 25 C2/P2

449

560

441

441

549

710

202

247

191

191

247

335

275

445

520

480

230

478

63

165

210

210

200

165

42

40

57

83

100

80

690

890

900

900

1350

1440

1- chain fall 2 - chain falls

Air pressure

The LIFTMASTER hoist reaches its

nominated performance data at 6 bar

flowing air pressure. But it can operate

also with only 4 or 5 bar, which decreases

the lifting speed by 20 to 30 percent.

The SWL will still be lifted. The type series

TCR has a wide capacity spectrum from

250 kg up to 100 tons upon request. All

hoists have an excellent relation between

price and performance. They are infinitely

adjustable in lifting and lowering speed

and can work continuously. The pull chain

control is even better in speed regulation

than the push key control because it

works directly on the inside main valve.

The TCR is also avaible with special

chains from sparkproof material and

hooks can be treated with bronze plating.Please ask for our assistance to choose

the correct option.

Air powered trolley

There are air powered and gear type

trolleys available for all capacities of

LIFTMASTER. Please inquire!

Hoists in trolley on request!

Drop forged, high tensileTop Hook made of tempered steel

Rigid, zinc galvanizedHook Safety Latch

Efficient Muffler

Precise Chain Guide with

chain stripperDependable starting

Vane Motor with 7 vanes

Control Valve, for smoothlyadjustable speed control

Robust cast steel Housing

Sprocket wheel with perfectly fittingmilled pockets

Limit Switches for highest andlowest hook position, also controllever for chain control

Round link steel chainacc. DIN EN 818-7-T withGalvanized Protection

Flexible Control hoses

Automatic Disc Brake

Three-stage Planetary Gearing

Emergency-Stop-Button,also for 4-key-control with trolley,according EN 418.

Swivel Hook in axialball bearing

TCR 3000P


34/88


35/88

33

Small air rope hoists

2

Air rope hoist LIFTMASTER EHW

Mobile application

The pneumatic rope hoist LIFTMASTER EHW is a practical addition

to the TC chain hoist program. This model is ideal for small load

up to 140 KG that must be moved quite often. All hoists are

equipped with a high-tensile steel rope which is spooled on a drum

inside of the hoist body. Only up to Ex II 2 G D II B T 5 (X).

Two types of control

The EHW types are hand guided and have their control direct

at the hoist body that allows one hand of operator to be free for

other actions. The EHW-R hoists have a separate push key

pendant control with one red emergency shut-off mushroom button

that ensures safety and complies with CE-regulations.

Automatic Brake

All hoists have a fail-safe automatic disc brake which holds the

load in any position even if the air supply fails.

Versatility of Service

These hoist are perfectly used at pack tables, for lifting of barrels,

bundles, parcels, over machine tools in slewing cranes etc.

The hoists switch off automaticaly in highest and lowest hook

position. Interesting is the combination with a pneumatic vacuum

lifter, whereby both units can be served through one common

air line. All hoists have a standard 2-meter rope which fits

onto the drum.

That is sufficient in most cases. However if you need a longer

rope, perhaps to allow a higher suspension of the type EHW-R,

we can extend the rope. But this additional length cannot be

spooled on the drum. The control hoses can be made longer up

to 10 m. The air pressure shall be max. 6.3 bar, but it can drop

to 4 bar and the hoist still lifts its rated capacity, only much

slower.

EHW60/120 EHW60R/120R

EHW120REHW60

TYPE EHW60 EHW60R EHW120 EHW120R

Capacity kgStandard lift m

Number of rope strands

Air pressure bar

Lifting speed with full load 0 - m/min

Air consumption m3/min

Air inlet R inch


602

1

6

26

0.9

3/8

9

602

1

6

26

0.9

3/8

10

1202

1

6

16

0.9

3/8

9

1202

1

6

16

0.9

3/8

10

EHW... with standard rope length Order No. H10080 H10083 H10081 H10084

Longer control hoses per meter Order No. H10086 H10086

More capacities on request.


36/88

34

Air supply

TYPE 1: Spiral hoseBeam length up to 10 m are best to serve with a spiral hose for

air supply. A rope is spanned parallel to the beam between twoholding arms. The spiral hose winds around it. The plastic hose

acts like a spiral spring, gets longer or shorter with the moving

trolley.

Complete set for 3 meter beam drive:Spiral hose with reserve (1.7 x L), twistable connections with male

thread, 2 span arms, wire rope with reserve, 4 rope clamps and

2 span screws. The maintenance unit (filter, lubricator, regulator)shoud be fixed as near as possible to the trolley. Short beams may

have it at the beginning of the beam.

TYPE 2: Drag hosePulling the air hose behind the trolley is the easiest way to bring

air to the hoist. Small plastic trolleys carry the hose in certaindistance behind the trolley. The hose hangs normally one meter

down. So one hose carrier is needed each two meters. The hose is

transparent with a strengthening textile inlet. It stands a pressure up

to 15 bar. Water and oil cannot harm it. Since the trolleys arepushed together when the train comes into end position, the beam

must be a little bit longer.

Complete set

The beside mentioned order number includes all accessory for a

beam length of 3 m. In details: air hose plus 3 meter addition forleading down to the ground where a ball valve cuts air supply off.

Plastic trolleys, end clamp, nipples end other fittings. If the hose

shall be detachable, a quick-acting coupling shall be ordered.

ATTENTION:

Driving through curves need special equipment. Please inquire!

TYPE 3: C-trackA C-track is the most comfortable air supply. The total beam lengthcan be used for driving. This type is mostly used with slewingcranes because the complete length of swing arm is necessary to

drive on. Here the holding arm of C-rack can be fixed easily what is

difficult in opposite under the ceiling in case of a double T-beam.C-tracks are available in lengths of 6 m. They are added with

combiners to longer rails.

Complete set

The beside mentioned order number includes all accessory for a

beam length of 3 m. In details: air hose plus 3 meter addition for

leading down to the ground, where a ball valve cuts air supply off.Three holding arms, connection clamps, screws, C-rail holder,

C-rails in 2 m length, C-rail connectors, first trolley leading arm,

hose clamps, fittings.

All metal parts are zinc plated.Remind when ordering that hoses have the correct diameter.

Choose one size bigger in case that hoses are longer than 10 m.

The longer the hose, the deeper the pressure drops.Hoists need minimum 5 bar FLOWING pressure during operation.

Each quick-acting coupling, every pipe bow, all valves etc.

reduce flow pressure. Even when static pressure is 6 bar before

operation, the flow pressure is a result of air friction in hoses and

fittings and other users of the same ring pipe line. Keep an eyeon your pressure gauge! A bad performance of air hoist is for

99% a result of wrong air supply and too low flow pressure.

TYPE 1

TYPE 2

TYPE 3

Ball valve Quick-action coupling

TYPE 1 2 3

Standard driving length m

Complete 1/2 inch Order No.

3

H10180

3

H10181

3

H101821 m more rail length 1/2 inch Order No. H10183 H10184 H10185

Complete 3/4 inch Order No. H10186 H10187 H10188

1 m more rail length 3/4 inch Order No. H10189 H10190 H10191

Complete 1 inch Order No. H10193 H10194

1 m more rail length 1 inch Order No. H10196 H10197

Special equipment:

Quick-action coupling 1/2 inch Order No. H10199 H10200

Quick-action coupling 3/4 inch Order No. H10202 H10203

Quick-action coupling 1 inch Order No. H10205 H10206

Air hose 1/2 inch - 6 bar Order No. H10208 H10209


Air hose 1 inch - 6 bar Order No. H10214 H10215




37/88

35

3


38/88

36

Electric chain hoist GCH

Brake

Maximum safety(construction:

brake after

slipping clutch)

New advanced

brake design

Allows lifting

above persons

according FEM 9.756

Maintenance free

Transmission

Helical-toothed first and

second gear step

for quiet running

Permanent lubrication

for wear resistant

operation

Chain wheel

Made of hardened steel

With additional chain pockets

(4mm): hence quiet running and

improved running properties

With double bearing construction

Geared limit switch

Geared limit switch for highest and lowesthook position. Easy to adjust in exact

position with milled setting ring

Exact positioning

Lifting heights up to 220 m

Accuracy for repetition assured

Chain guidance

2-part construction to optimize

maintenance

Reinforced plastic

material highly

wear resistant

Safe operation

jamming excluded

Slipping clutch

Simple and precise adjustment

Maintenance free and highly

resistant to wear

Ease of servicing

thanks to comfortable

access

Control switch

With built-in support wire

as a standard

2-buttons: design especially

ergonomic

Emergency stop as a standard Protection: IP 65 to DIN 40050

Electric chain hoist PLANETA-GCH

Simple Reliable Safe

Compact design

Robust construction

Simple maintenance

Fast availability

Moderntechnology

Highest quality

Extraordinarylong duty life

Maximum safety


39/88

37


3

Entertainment industry

no show for sure!

Climbing and lifting with

PLANETA-GCH-Electric chain hoist

Individually direct control available

Control from point far away

Standard with gear limit switch

2nd brake

According standards like BGV-D8,

BGV-D8 Plus and BGV-C

For applications in theatres,

stages and studios

All in black color available

Synchronic lifting technology

with PLANETA electric

chain hoist

Solution for optimized

handling of exceptional length

and bulky loads

Precise parallel run of two or four

load hooks guaranteed

Load capacity with 2 hooks,

up to 3200 kg

Hook position (height) individually

adjustable by geared limit switch Step less speed control with frequency inverter available

(optional)

Hook distance following needs and further on adjustable

Modular development for use in low rooms

Practicable in fully automatic installations with external controls

Optional with chain oiling system

Flexible hand guide control

Chain Handy with PLANETA-

GCH-Electric chain hoist

Product positioning through toggle switch

in comfortable and efficient way

Allows a fast and reliable movement

of different goods Standard left and right hand operation

Safe lifting up to 250 kg capacity

Step less speed control with frequency

inverter available (optional)

Low headroom version with

PLANETA-GCH-Electric chain hoist

Solution for especially low rooms.

For working areas in all kind of industries

Reduced headroom over clever

chain guidance Hook position individually adjustable by

geared limit switch



Hook distance variable by modular

lengthening device

Capacities up to 4000 kg

Designed for use with the complete GCH range

Radio control

69 different frequencies, 433.075 - 434.775 MHz

Emergency stop acc. EN 954-1 category 3

10 push buttons with 2 positions

Housing protection class: IP54

Accu status monitoring

High precise rigid hand

guide control Telescopic

Handy with PLANETA - GCH

electric chain hoist

Exact and accurate positioning

through toggle switch and rigid telescopic

guide system

Allows the controlled and perfected

handling of different (incl. liquids) transport

goods

Standard left and right hand operation

Safe lifting up to 250 kg capacity




40/88


41/88

39


3

Hook mounting *

for GCH

Order No.

TYPE 250 / TYP 500 H20760

TYPE 1000 H20761

TYPE 1600 / TYP 2000 / TYP 2500 H20762

Options for GCH * Order No.

Motor thermal protection / Klixon 140C H20073

Special motor voltage H20076Special control voltage H20078

CEE-plug with 5m connection cable H20080

Counter of operation hours H20553

Radio remote control for hoist only H20557

Radio remote control for hoist and trolley H20558

Limit switches for electric motor trolley H20559

Rain cover of textile material H20561

Connecting lug GCH 250-2-L87-05 H20162

Connecting lug GCH 250-1-500-1-L87-05 H20163




Connecting lug GCH 1600-1-2000-1-L87-20 H20167


Connecting lug GCH 1600-2-2000-2-2500-2-L87-50 H20169

Special options upon request:

Motor driven trolley

Low headroom version

Synchronized hoists

Flexible one-hand-solution

Rust proof electric hoist

Hoists for theatres, stages and studios acc. BGV C1

Electric chain hoists for DUST Ex-areasEx II 3D Ex tc IIIA T130 C Db

Electric hoists and trolleys for 1-Ph/230V (single phase)

Electric hoists for any other voltage

Chain case*

for TYPE

Size of

chain case

Version Order No.

GCH 250

up to 8 m Chain Plastic H20754


up to 25 m Chain Textile H20756

GCH 500




GCH 1000up to 8 m Chain Plastic H20757


GCH 1600 up to 20 m Chain Textile H20758

GCH 2000 / 2500 up to 15 m Chain Textile H20758

* Only in connection with electric chain hoist/trolleyMore sizes for higher lifts upon request!

* Only in connection with electric chain hoist/trolley

* Only in connection with electric chain hoist/trolley

Rain coverof textile material

Electric motor trolley

for GCH

Driving speed

m/min

Standard

flange widthmm

Weight

kg

Order No.

EMF 50 * to 1000 kg 12/4 50 - 99 27 H20720

EMF 150 to 2000 kg 12/4 76 - 139 31 H20721

EMF 300 to 4000 kg 12/4 120 - 179 50 H20722

EMF 500 to 5000 kg 12/4 120 - 179 57 H20723

Wider flange width** up to 300 H20724

Manual push trolley for

GCH

Standard

flange width

mm

Weight

kg

Order No.

GHF 500 K to 500 kg 50 - 99 2.5 H20729

EHF 50 * to 1000 kg 50 - 99 7.5 H20730

EHF 150 to 2000 kg 76 - 139 13.5 H20731

EHF 300 to 4000 kg 120 - 179 27.5 H20732

EHF 500 to 5000 kg 120 - 179 27.5 H20733

Wider flange width** up to 300 H20734

* Only in connection with GCH 500/2 ** Only in connection with trol ley

* Only in connection with GCH 500/2 ** Only in connection with trol ley

TYPE

Capacities in kg acc. ISO (FEM)*Lifting

speed with

load

m/min

Number

of

chain

falls

Chain

size

mm

Motor

power

kW

3 x 400 V

50 Hz

(example)

A

Weight

with

3 m lift

kg

Weight

each meter

add. lift

kg

Order No

GCH with

3 m lift

Order No

Add. lift

per m**

M3

(1Bm)

M4

(1Am)

M5

(2m)

M6

(3m)

M7

(4m)

GCH 2000/1N 2000 1600 1250 1000 800 8 1 10 x 28 3.05 7.3 65 2.25 H20706 H20101

GCH 2000/1NF 2000 1600 1250 1000 800 8/2 1 10 x 28 3.05/0.77 8.0/4.5 67 2.25 H20707 H20101

GCH 2000/1SF 1250 1000 800 630 500 12.5/3 1 10 x 28 2.98/0.72 8.0/4.5 67 2.25 H20708 H20101

GCH 2000/2N 4000 3200 2500 2000 1600 4 2 10 x 28 3.05 7.3 76 4.5 H20709 H20102GCH 2000/2NF 4000 3200 2500 2000 1600 4/1 2 10 x 28 3.05/0.77 8.0/4.5 78 4.5 H20710 H20102

GCH 2000/2SF 2500 2000 1600 1250 1000 6.25/1.5 2 10 x 28 2.98/0.72 8.0/4.5 78 4.5 H20711 H20102

GCH 2500/1N 2500 2000 1600 1250 1000 6.4 1 10 x 28 3.05 7.7 65 2.25 H20712 H20103

GCH 2500/1NF 2500 2000 1600 1250 1000 6.4/1.6 1 10 x 28 3.05/0.77 8.2/4.4 67 2.25 H20713 H20103

GCH 2500/1SF 1600 1250 1000 800 630 10/2.5 1 10 x 28 3.05/0.77 8.2/4.4 67 2.25 H20714 H20103

GCH 2500/2N 5000 4000 3200 2500 2000 3.2 2 10 x 28 3.05 7.7 76 4.5 H20715 H20104

GCH 2500/2NF 5000 4000 3200 2500 2000 3.2/0.8 2 10 x 28 3.05/0.77 8.2/4.4 78 4.5 H20716 H20104

GCH 2500/2SF 3200 2500 2000 1600 1250 5/1.25 2 10 x 28 3.05/0.77 8.2/4.4 78 4.5 H20717 H20104

** Load chain and control cable


42/88

40


Type GCHwith lug eye mounting

A

BNC

D

HK

M

Type GCHwith electric motor trolley

E

J

F L G

TYPE GCH ... 250/1 250/2 500/1 500/2 1000/1 1000/2 1600/1 1600/2 2000/1 2000/2 2500/1 2500/2

A (Dimensions) mm

B mm

C mm

D mm

E mm

F mm

G mm

H mm

J mm

K mm

L mm

M mm

N mm

281

309

246

40

277

250

209

369

418

398

50-99

431

36

281

309

246

40

277

250

209

408

457

398

50-99

470

36

281

309

246

40

277

250

209

377

426

398

50-99

439

36

281

309

246

40

277

250

209

417

466

398

50-99

479

36

367

367

321

52

293

253

211

482

542

565

76-139

553

43

367

367

321

52

293

253

211

556

616

565

76-139

627

43

424

389

345

75

323

259

217

608

637

646

120-179

638

50

424

389

345

75

323

259

217

690

719

646

120-179

720

50

424

389

345

75

323

259

217

608

637

646

120-179

638

50

424

389

345

75

323

259

217

690

719

646

120-179

720

50

424

389

345

75

323

259

249

608

637

646

120-179

638

50

424

389

345

75

323

259

249

690

719

646

120-179

720

50

Electric chain hoist GCHwith electric motor trolley EMF

Electric chainhoist GCH withhook mounting

Electric chain hoist GCHwith push trolley EHF

Double chain fall

Single chain fall


43/88


44/88

42

Electric chain hoist / accessories

Trolley buffer assembly

Trolley bufferThe ideal trolley limit stop, suitable for all types of manual trolley,

reel chain trolley and electric trolley up to a maximum load bearing

capacity of 10 t! With just a few simple actions it is clamped to the

required end of the track on a parallel flange carrier section.

In this way it fulfils various functions: Path limit to prevent crashes,

holding hoists in the desired position, securing the trolley againstrolling away inadvertently, absorbing impact energy and more

precise braking.

Trolleybuffer

TYPEBeamwidths

mm

Order No.

Setconsisting of

2 pieces

K1 90 - 300 H20066

Please photocopy, fill in and FAX to us!

Enquiry help for electric hoists1. What tasks will the hoist be used for?

...........................................................................................

...........................................................................................

2. Type of hoist: Electric chain hoist Electric cable hoist

3. How often is the nominal load lifted?

................................. /day ................................. /hour

4. How often is the partial load lifted? ................................. /day

5. How many load cycles per day? ..........................................

6. Distance covered per hoisting cycle:..................................... m

7. Speed:

a) Required main hoisting speed .. .. ... .. ... .. .. ... .. m/min

b) 1 speed

c) 2 speeds

8. Clear height for electric hoist (short model required?): .......... mm

9. Total weight of load to be hoistedincluding load-carrying equipment: ............ kg

10. Lifting height (standard: 3 m): ............ m

11. Mounting height/trolley track height(Floor to bottom edge of carrier) ............. m

12. Operating height (distance from floor oroperating platform to bottom edge of carrier): ............. m

Documents

Catalogue No14 Englisch Internet