Catalogue Master 2009 - cerenservis.com · 4 Technical Catalogue 2009 HIGH PERFORMANCE, BASE AND CLEARCOAT TECHNOLOGY SPRAY GUNS Part Number Explanation GTIPRO - T1 - B - 13 Model

Technical Catalogue 2009 1

Technical Catalogue 20092


GTi-Pro Advanced HVLP and Trans-Tech Spray Guns .................................................................4

PRi-Pro Trans-Tech Gravity Feed Primer Spray Gun ....................................................................5

SRi-Pro HVLP Spot Repair Gravity Feed Spray Gun ..................................................................6

DAGR Airbrush ....................................................................................................................7

GFG Pro Conventional Gravity Feed Spray Gun .....................................................................8

FLG-5 General Purpose Gravity Feed Spray Gun .....................................................................9

DMG Air Dryer Guns and Systems .......................................................................................10

DVFR-1 Filter Regulator .......................................................................................................11

DVFR-2 Filter Regulator Coalescer ........................................................................................12

DVFR-3 Filter Regulator .......................................................................................................13

DVFR-8 Filter Regulator Coalescer with Activated Carbon Filter ................................................14

MPV-623 Full Face Air Fed Visor Outfit .................................................................................15

MPV-627 Air Fed Half Mask Outfit .......................................................................................16

Valuair and Freedom Half Mask Respirators ..........................................................................17

Accessories - Gravity and Suction Cups ................................................................................18

Accessories - Spray Gun .............................................................................................. 19 - 20

Accessories - Hoses and Connections ...................................................................................21

Commercial Vehicle Product Section

GTi-Pro Compliant Suction and Pressure Feed Spray Guns ......................................................22

CVi Suction and Pressure Commercial Vehicle Spray Guns ......................................................23

JGA-Pro Conventional Suction and Pressure Feed Spray Guns .................................................24

KBII 2.3 Litre Remote Cup ...................................................................................................25

Binks DVP Double Diaphragm Fluid Pump .............................................................................26

Binks Air Assisted Airless Pump ............................................................................................27

Binks Pressure Feed Tank .....................................................................................................28

Finishline Economy Regulators .............................................................................................29

Evercoat ...........................................................................................................................30

Notes ........................................................................................................................ 31 - 33

All Products and Spares Alpha/Numeric Listing .............................................................. 34 - 37

ATEX ................................................................................................................................38


HIGH PERFORMANCE, BASE AND CLEARCOAT TECHNOLOGY SPRAY GUNS

Part Number Explanation

GTIPRO - T1 - B - 13 Model Air Cap Base Fluid Tip

No H1 HVLPAir Cap

A totally new DeVilbiss spray gun developed for busy professional painters needing the ultimate in quality finishes. Three advanced technology, air caps (one HVLP and two Trans-Tech) for optimum application performance with the latest solvent and waterborne coatings. All new ergonomic gun body design with even better fit and balance for comfortand control. New ultra high flow fluid tips provide superb versatility across a range of viscosities.Revolutionary air valve design gives smoother feel for even greater air and paint control for ease of fade-outs and blend-ins. Simplified, user friendly components provide easy cleaning andmaintenance.

No T1 Trans-TechAir Cap


*** = Air Cap** = Fluid tip size

SpecificationAir Inlet Pressure 2.0 bar (29psi)Air Consumption T1: 280 l/min (9.9 cfm)

T2: 350 l/min (12.4 cfm)H1 450 l/min (15.9 cfm)

Air Inlet Thread 1/4” Universal

GTi-Pro Spray Gun KitsWhen ordering please specify the air cap of your choice (H1, T1 or T2), the tip size of your choice (12, 13 or 14) and the paint type marking required on your gun B=BASE, C=CLEARPart No Examples DescriptionGTIPRO-T2C-12 Gun with a T2 Trans-Tech air cap, a #12 fluid tip and marked as “CLEAR”GTIPRO-H1B-13 Gun with a H1 HVLP air cap, a #13 fluid tip and marked as “BASE”GTIPRO-T1C-13 Gun with a T1 Trans-Tech air cap, a #13 fluid tip and marked as “CLEAR”

Kit includes GTi PRO Gravity gun, cup, paint filter, brush, set of 4 identification rings and combination spanner

AccessoriesPart No DescriptionPRO-100-H1-K H1 HVLP Air Cap and retaining ring PRO-100-T1-K T1 Trans-Tech Air Cap and retaining ringPRO-100-T2-K T2 Trans-Tech Air Cap and retaining ringPRO-450-***-** Air cap, fluid tip and needle kitPRO-200-**-K Fluid Nozzle Size Numbers 12, 13 & 14 PRO-300-K Fluid NeedlePRO-415-1 Spray Gun Service/Repair Kit SPN-8-K2 Torx & flat blade Screwdriver - Trigger & Nedle Packing SN-28-K Spanner Ring for fluid tip and open end for valves/inlet DGIPRO-502-BAR Digital Gauge - Reads in barsMPV-60-K3 Male Quick Detach Uni Swivel - fits to gun air inletHAF-507-K12 Lightweight in-line air filter (pack of 12).4900-5-1-K3 Pack of three cleaning brushes KGP-5-K5 Pack of 5 gravity cup filters for GFC cups

Cup Capacity 560 mlsWeight (gun & cup) 768 gmsAir Cap & Ring Plated BrassFluid Tip Stainless SteelFluid Needle Stainless Steel

DGIPRO-502-BAR

MPV-60-K3

HAF-507-K12

PRO-415-1


DGIPRO-502-BAR

MPV-60-K

KGP-5-K5

GFV-50F

HIGH PERFORMANCE, GRAVITY FEED,PRIMER SPRAY GUN

No P1 Trans-Tech Air Cap

SpecificationAir Inlet Pressure 2.0 bar (29psi)Air Consumption 300 l/min (10.6 cfm)Air Inlet Thread 1/4” UniversalCup Capacity 560 mlsWeight (gun & cup) 760 gmsAir Cap & Ring Plated BrassFluid Tip Stainless SteelFluid Needle Stainless Steel


PRiPRO - P1P - XX Model Air Cap Fluid Tip

PRi Spray Gun KitsPart No DescriptionPRiPRO-P1P-14 Gravity Gun & Cup – P1 Air Cap & No. 14 Fluid Tip PRiPRO-P1P-16 Gravity Gun & Cup – P1 Air Cap & No. 16 Fluid Tip PRiPRO-P1P-18 Gravity Gun & Cup – P1 Air Cap & No. 18 Fluid Tip PRiPRO-P1P-20 Gravity Gun & Cup – P1 Air Cap & No. 20 Fluid Tip

PRiPRO-P1P-25 Gravity Gun & Cup – P1 Air Cap & No. 25 Fluid Tip

Kit includes PRiPRO Gravity Gun, cup, paint filter, brush and multi-fit spanner

AccessoriesPart No DescriptionPRIPRO-100-P1-K Air cap and retaining ringPRIPRO-210-**-K Fluid Nozzle - Size Numbers 14,16,18, 20 & 25PRIPRO-310--K Fluid needlePRO-415-1 Spray gun repair kit – includes seals, packing and springsDGIPRO-502-BAR Digital pressure gauge – reads in barsHAF-507-K12 Lightweight, in-line air filter (pack of 12)KGP-5-K5 Pack of gravity cup filters for GFC cupsGFC-501 Replacement gravity cup complete (0.6 litre)4900-5-1-K3 Pack of three cleaning brushesMPV-60-K3 Male quick detach Uni swivel stem to fit onto gun air inletGFV-50F Gravity gun bench top stand

GFG-6 Wall mounting bracket for gun and cup

** = Fluid tip size

Advanced technology P1 Trans-Tech Air Cap Suitable for all primers including latest generation waterbase materialsFluid Tip sizes available for fillers, surfacers and polyestersFirst class atomisation and material distributionUtilises new design air valve for smooth triggering control All new ergonomic gun body with improved “fit and feel” Large spray patterns for fast and easy applicationDrop forged body with tough anodised finish for protection


COMPLIANT SMART / SPOT REPAIR GRAVITY FEED SPRAY GUN

No HS1Air Cap HVLP

SpecificationAir Consumption: HS1: 135 l/min (4.8 cfm) @ 2.0 bar (30 psi)

TS1: 100 l/min (3.5 cfm) @ 2.0 bar (30 psi)

RS1: 55 l/min (1.9 cfm) @ 1.0 bar (15psi)

Air inlet thread 1/4” Universal

Cup Capacity 125 mls

Weight (gun & cup) 500 gms

Air cap & ring Plated Brass

Fluid Nozzle & Stainless Steel

Needle Stainless Steel

SRi Pro Gravity Spot Repair Spray Gun Kits (Specify the air cap & nozzle size required)

Part No Description SRIPRO-TS1-08 Gravity Feed Gun with TS1 Trans-Tech cap & No. 08 fluid tip SRIPRO-HS1-10 Gravity Feed Gun with HS1 HVLP cap & size No. 10 fluid tip

Kit contents are spray gun with chosen cap tip set up, permanent and semi-disposable cups, pouring funnel, spanner, torx key and cleaning brush.

AccessoriesPart No Description SRIPRO-100-HS1-K HVLP Air Cap and retaining ring

SRIPRO-100-TS1-K Trans-Tech Air Cap and retaining ring

SRIPRO-100-RS1-K Round spray (hornless) cap - priming, pinstriping

SRIPRO-200-**-K Fluid Nozzles - Sizes No. 08, No. 10, No. 12 & No. 14

SRIPRO-300-08-10-K Fluid Needle for No. 08 & No. 10 fluid nozzles

SRIPRO-300-12-14-K Fluid Needle for No. 12 & No. 14 fluid nozzles

SPN-8-K2 Torx & flat blade Screwdriver - Trigger & Needle Packing

MPV-60-K3 Male Quick Detach Uni Swivel - fits to gun air inlet

SRi-65-K2 Pack of two cleaning brushes

PRO-415-1 SRi service kit – includes seals, packing and springs

SRi-510 125ml Acetal gravity cup

SRi-51-K12 Pack of 12 SRi cup pouring funnels

SRi-478-K12 Pack of 12 SRi Gravity Cups & 12 coloured lids

SRi-480-K3 Black cup and lid for UV paint – Pack of 3

SRi-42-K3 Pack of 3 cone filters DGIPRO-502-BAR Digital Gauge - Reads in bars


SRiPRO - TS1 - 08 Model Air Cap Fluid Tip

Totally redesigned SRi gravity gun for small scale repair work

New, more ergonomic gun body with improved fit, feel, comfort and controls

New balanced air valve design for precision control of paint and air

Three compliant air cap choices to suit all latest refinishing materials

A range of four nozzle sizes for varying viscosities and control preferences

Renowned DeVilbiss atomisation quality and even paint distribution

Faster, easier maintenance from user-friendly fittings and adjustments

Rugged drop forged body with anodised finish for protection

DGiPRO-502-BAR

SPN-8-K2 &SRi-50-K2

SRIPRO-100-RS1-K

MPV-60-K3

No TS1Air Cap Trans Tech


GRAVITY FEED AIRBRUSH PERFORMANCE & VERSATILITY FOR AUTOMOTIVE ARTISTS

Specification

Operating Pressure 1.3 – 3.5 bar (20 -50 psi)

Max inlet pressure 12 bar (175 psi)

Fluid tip 0.35mm

Cup Capacity 9 mls (1/3 fl/oz)

Airbrush plating Nickel, copper, chrome

Needle Packing Teflon®(solvent proof)

Hose: Inside diameter 3.2 mm (1/8”)

Air Hose connection 1⁄4” NPS (M)

Universal fluid threaded connector 3/8”

Sprays most automotive paints and lacquers

Hairline detail to high paint-flow shading and gradual fades

Lightweight, well balanced with smooth double action trigger

Crown cap standard for fine lines and needle protection

Copper, nickel and chrome plated body Pre-set handle for precise control of paint flow

Removable 9 mls (1/3rd oz) gravity cup

Solvent proof fluid passages, Teflon® needle packing Precision made and hand tested in the U.S.A.

DAGR Airbrush Kit and Accessories

Part No Description

DGR-501G-35 DAGR Gravity Airbrush - 0.65mm – 9 CC Cup/lid (1/3 fl/oz)

DGR-123 3 m (10’) Braided Nylon Air Hose with loose nut 1⁄4” swivel connections.

DGR-121K Repair Kit - ‘O’ Rings, needle spring and washers

Part Number

DGR - 501G - 35


PROFESSIONAL CONVENTIONAL GRAVITY FEED SPRAY GUN

SpecificationAir Inlet Pressure C1: 2.5 - 3.0 bar (30 - 45 psi)

C2: 2.5 - 4.0 bar (30 - 60 psi)Air Consumption C1: 300 l/min (10.6 cfm) @ 3.0 bar

C2: 305 l/min (12.8 cfm) @ 3.0 barAir Inlet Thread 1/4” Universal


GFGPRO - C1 - XX Model Air Cap Fluid Tip

GFG-Pro Spray Gun KitsWhen ordering please specify the air cap of your choice (C1 or C2) and the tip size of your choice (14, 16 or 18).Part No Examples DescriptionGFGPRO-C1-14 Gravity Gun & Cup - C1 air cap and No. 14 fluid tipGFGPRO-C1-16 Gravity Gun & Cup - C1 air cap and No. 16 fluid tipGFGPRO-C2-18 Gravity Gun & Cup - C2 air cap and No. 18 fluid tip

Kit includes GFG PRO Gravity gun, cup, paint filter, brush and multi-fit spanner

No C1Air Cap

AccessoriesPart No DescriptionPROC-120-C1-K C1 Air Cap and retaining ringPROC-120-C2-K C2 Air Cap and retaining ringPROC-220-**-K Fluid Nozzle Size Numbers 14, 16 & 18 GFGPRO-320-K Fluid NeedlePRO-415-1 Spray Gun Service/Repair Kit SPN-8-K2 Torx & flat blade Screwdriver - Trigger & Nedle Packing SN-28-K Spanner Ring for fluid tip and open end for valves/inlet DGIPRO-502-BAR Digital Gauge - Reads in barsMPV-60-K3 Male Quick Detach Uni Swivel - fits to gun air inletHAF-507-K12 Lightweight in-line air filter (pack of 12)4900-5-1-K3 Pack of three cleaning brushes KGP-5-K5 Pack of 5 gravity cup filters for GFC cups

Totally redesigned GFG gun for professional use.

Renowned DeVilbiss atomisation quality and even paint distribution.

Utlises new air valve design for ultra smooth triggering and control.

Rugged drop forged body with anodised finish for protection.

A choice of two advanced technology air caps to suit solids and metallics.

Three fluid tip sizes for varying viscosities and control preferences.

New, more ergonomic gun body with improved fit, feel, comfort and control.

Faster, easier maintenance from user-friendly fittings and adjustments.

No C2Air Cap

** = Fluid tip size

DGIPRO-502-BAR

MPV-60-K3

HAF-507-K12

PRO-415-1

Cup Capacity 560 mlsWeight (gun & cup) 768 gmsAir Cap & Ring Plated BrassFluid Tip Stainless SteelFluid Needle Stainless Steel


FLG-5GENERAL PURPOSE SPRAY GUN

SpecificationAir inlet Pressure 2.0 bar (29 psi) – Suction & GravityAir Consumption 277 l/min (9.8 cfm) Air Inlet Thread 1⁄4” Universal Cup Capacity Gravity 560 mls, Suction 1140 mlsWeight (gun & cup) Gravity 642 gms, Suction 934 gms Air Cap Plated brassRetaining Ring Plated brassFluid Tip Stainless SteelFluid Needle Stainless Steel

FLG-5 Spray Gun KitPart No DescriptionFLG-G5-14 Gravity Gun & Cup Kit – No 5 Air Cap & 1.4 mm Fluid Tip FLG-G5-18 Gravity Gun & Cup Kit – No 5 Air Cap & 1.8 mm Fluid Tip FLG-S5-18 Suction Gun & Cup Kit – No 5 Air Cap & 1.8 mm Fluid Tip

FLG-5 Air Cap

Spares and AccessoriesPart No DescriptionFLG-0001-5 No 5 Trans-Tech Air Cap (Fits Gravity & Suction)SGK-0023 Air Cap Retaining RingSGK-0012-14 1.4 mm fluid tip for gravity gun SGK-0012-20 2.0 mm fluid tip for gravity gun SGK-0014-18 1.8 mm fluid tip for suction and gravity guns SGK-0430-18 Fluid Needle (for 1.8 mm tip – Suction Gun) SGK-0420 Fluid Needle (for 2.0 mm tip – Gravity Gun) SGK-0418 Fluid Needle (for 1.8 mm tip – Gravity Gun) SGK-0414 Fluid Needle (for 1.4mm - Gravity Gun) SGK-0043-K10 Fluid Tip seal (pack of 10)K-5030 Baffle Replacement Kit K-5040 Repair kit – seals and springs – includes service toolKGP-5-K5 Pack of gravity cup filters for GFC cupMPV-60-K3 Male, quick detach, universal swivel – fits to gun air inlet4900-5-1-K3 Pack of three cleaning brushesKK -4584 Spray gun cleaning tool kit – purpose made brushes & toolsSGK-0037 Needle Packing

General purpose compliant spray gun for a wide range of refinish paints and coatings

Operates with unique and efficient DeVilbiss Trans-Tech® Atomisation Technology

Ergonomically shaped gun handle for positive grip and comfort

Smooth action trigger with exceptionally light pull for fatigue free operation

Ultra lightweight but strong, cast aluminium gun body

Full controls of pattern shape, fluid flow rate and air inlet pressure

Precision engineered brass air cap and stainless steel fluid tips

Choice of gravity or suction models with large capacity cups

NOT SUITABLE FOR USE WITH WATERBORNE MATERIALS

HAV-501-B

KK-4584

KGP-5-K5

GFV-50F


FLG - G5 - 14 Model Gravity/Air Cap Fluid Tip


DMG AIR DRYER GUNS AND SYSTEMS

SpecificationAir consumption per gun @3.4 bar (50psi) 325 l/min (11.5cfm)Recommended working pressure range 2-4 bar (30 – 60 psi)Noise level at 3.4 bar (50psi) 83 dba

A versatile system to speed up the drying process

DMG guns multiply their intake by a factor of 7 to give generous air volumes

A fully adjustable aerodry stand provides full dryer flexibility

Solvent resistant for cleaning in gun wash machines

DMG guns feature intake debris filters and shut-off valves

Ref No Description Part Number

1 Single Air Dryer Gun DMG-501-K2 Female QD MPV-4243 Filter pack of 3 DMG-5-K3

DMG Air Dryer SystemsPart No Description

DMG-501-K Single Air Dryer gun – boxedDMG-620 Two gun stand system with hose

AccessoriesPart No Description

DMG-5-K3 Pack of 3 dryer inlet filtersDMG-520-K Air dryer stand and hoseH-6086-B 10m Air hose with female quick detach and swivel/loose nut

fittingsMPV-424 Female, self sealing, QD air line fittingMPV-5 Male stem, QD air line fitting with 1/4” BSP(F)


DVFR-1 FILTER REGULATOR

SpecificationAir Inlet Thread 1/2” BSP (F)Regulated Outlets 3 ValvedUnregulated Outlets NAAir Outlets (Ball Valves) 1/ 4” BSP (M)Width (Overall) 175mm (6.9”)Height (Overall) 280mm (11”)Weight 2500 gms (88oz)Capacity (maximum air flow) 3500 l/min (124cfm)Maximum Air Inlet Pressure 13 bar (189 psi)Maximum Regulated Outlet Pressure 0-8 bar (0-116psi)Maximum Operating Temperature 100°C (212°F)Pressure Gauge 0-11 bar (0-160 psi)Gauge port 1/8” BSP (F)Air Filtration Down to 5 micronsDrain Valve Semi-AutomaticMaximum Pressure Drop 5% of Inlet Pressure

Rolling diaphragm gives rapid response andsensitive air pressure control

Provides air filtered to 5 microns

Maximum airflow 3500 l/min (124 cfm)

Suitable for use in booth/oven up to 100°C (212°F)

Three ball valve controlled outlets

Tamperproof, removable and lockable air pressure control knobs


1 Upper Cover Assembly DV-94508062 Filter (Air) DV-94517053 Metal Filter Bowl DV-9453301-MET4 Ball Valve SER-3414-MF5 Pressure Gauge GA-3196 Isolation Valve DV-8000035

DVFR-1 RegulatorPart No Description

DVFR-1 3 Outlet Filter Regulator (90 cfm)DV-9451705 Replacement 5 micron filter element for DVFR-1DV-9420601 Filter bowl removal tool

DV-9451705

DV-9420601


DVFR-2 FILTER REGULATOR COALESCER

SpecificationAir Inlet Thread 1/2” BSP (F)Regulated Outlets 3 ValvedUnregulated Outlets NAAir Outlets (Ball Valves) 1/ 4” BSP (M)Width (Overall) 240mm (9.5”)Height (Overall) 280mm (11”)Weight 3200 gms (113oz)Capacity (maximum air flow) 3500 l/min (124cfm)Maximum Air Inlet Pressure 13 bar (189 psi)Maximum Regulated Outlet Pressure 0-8 bar (0-116psi)Maximum Operating Temperature 100°C (212°F)Pressure Gauge 0-11 bar (0-160 psi)Gauge port 1/8” BSP (F)Air Filtration Down to 0.01 microns *Drain Valve Semi-AutomaticMaximum Pressure Drop 10% of Inlet Pressure

* Suitable for Breathing Air

High air flows for conventional and compliantspray guns

Provides air filtered to 0.01 microns suitable for air-fed respiratory outfits

Maximum airflow of 3500 l/min (124cfm)

Suitable for use in booth/oven up to 100°C (212°F)

Three ball valve controlled outlets

Rolling diaphragm gives rapid response and sensitive air pressure control


1 Upper Cover Assembly DV-94508062 Filter (Air) DV-94517053 Metal Filter Bowl DV-9453301-MET4 Ball Valve SER-3414-MF5 Pressure Gauge GA-3196 Fine Filter (Oil) DV-94517117 Isolation Valve DV-8000035

DVFR-2 RegulatorPart No DescriptionDVFR-2 3 Outlet Filter Regulator Coalescer (50 cfm)DV-9451705 Replacement 5 micron filter element for DVFR-2DV-9451711 Replacement 0.01 micron fine filter breathing air element for DVFR-2DV-9420601 Filter bowl removal tool

DV-9451705& DV-9451711

DV-9420601


DVFR-3 FILTER REGULATOR

SpecificationAir Inlet Thread 1/2” BSP (F)Regulated Outlets 2 ValvedUnregulated Outlets NAAir Outlets (Ball Valves) 1/ 4” BSP (M)Width (Overall) 165mm (6.5”)Height (Overall) 240mm (9.5”)Weight 1341 gms (46oz)Capacity (maximum air flow) 1700 l/min (60cfm)Maximum Air Inlet Pressure 13 bar (189 psi)Maximum Regulated Outlet Pressure 0-8 bar (0-116psi)Maximum Operating Temperature 40°C (104°F)Pressure Gauge 0-11 bar (0-160 psi)Gauge port 1/8” BSP (F)Air Filtration Down to 20 micronsDrain Valve Semi-AutomaticMaximum Pressure Drop 5% of Inlet Pressure

Dual filtration process provides air filtered to 20 microns

Maximum airflow of 1700 l/min (60cfm)

Two ball valve controlled outlets

Ideal for general workshop or prep deck duty.

Semi automatic filter drain


1 Upper Cover Assembly DV-93508112 Filter 93517063 Metal Filter Bowl DV-93533014 Ball Valve SER-3414-MF5 Pressure Gauge GA-319


DVFR-3 2 Outlet Filter Regulator (60 cfm)9351706 Replacement 20 micron filter element for DVFR-3

9351706

GA-319


DVFR- 8 FILTER REGULATORCOALESCER WITH ACTIVATED CARBON FILTER

SpecificationAir Inlet Thread 1/2” BSP (F)

Regulated Outlets 3 Valved

Unregulated Outlets NA

Air Outlets (Ball Valves) 1/ 4” BSP (M)

Width (Overall) 305mm (12”)

Height (Overall) 280mm (11”)

Weight 3.3kg

Capacity (maximum air flow) 3500 l/min (124cfm)

Maximum Air Inlet Pressure 13 bar (189 psi)

Maximum Regulated Outlet Pressure 0-8 bar (0-116psi)

Maximum Operating Temperature 100°C (212°F)

Pressure Gauge 0-11 bar (0-160 psi)

Gauge port 1/8” BSP (F)

Air Filtration Down to 0.01 microns *

Drain Valve Semi-Automatic

Maximum Pressure Drop 10% of Inlet Pressure

* Suitable for Breathing Air

High air flows for conventional and compliant spray gunsProvides air filtered to 0.01 microns suitable for air-fed respiratory outfitsActivated carbon filter removes oil carry over to 0.003 ppmMaximum airflow of 3500 l/min (124cfm)Suitable for use in booth/oven up to 100°C (212°F)Three ball valve controlled outletsRolling diaphragm gives rapid response and sensitive air pressure control


1 Upper Cover Assembly DV-9450806

2 Filter (Air) DV-9451705

3 Metal Filter Bowl DV-9453301-MET

4 Ball Valve SER-3414-MF

5 Pressure Gauge GA-319

6 Fine Filter (Oil) DV-9451711

7 Isolation Valve DV-8000035

8 Activated Carbon Filter DV-9451711AC


DVFR-8 3 Outlet Filter Regulator Coalescer with activated carbon filter

DV-9451705 Replacement 5 micron filter element for DVFR-8

DV-9451711 Replacement 0.01 micron fine filter breathing air element for DVFR-8

DV-9451711AC Replacement 0.003 ppm activated carbon filter element for DVFR-8

DV-9420601 Filter bowl removal tool

DV-9451705& DV-9451711

DV-9451711AC


MPV FULL FACE AIR-FED VISOR OUTFIT

SpecificationProtection APF=40 ( suitable for use with Isocyanates)

Carbon Filter Life 1000 hours

Supply Pressure 3.8 bar (55 psi) - At hose supply connection max 7 bar (100 psi)

MPV-623 OutfitPart No Description

MPV-623 Complete integral air-fed visor outfit with waistbelt


MPV-526 Complete integral visor with neck cover, hood and air tube

MPV-44-K10 Replaceable clear visor covers – kit of 10

MPV-476-K5 Replaceable foam face seal cassettes – kit of 5

MPV-477-K5 Replaceable fabric face seal cassettes – kit of 5

MPV-478-K5 Clear visor with visor cover lugs – kit of 5

MPV-457 Clear air tube with low noise diffuser

MPV-24-K5 Grey fabric neck cover – kit of 5

H-6085-QD 10 metre length air hose complete with male and female QD’s

H-6065-B 10 metre length air hose complete with re-usable fittings

MPV-518 Complete waistbelt with regulator, filter cartridges & QD’s

MPV-22 Replaceable waistbelt filter cartridge

MPV-455 Waistbelt regulator (does not include belt or QD)

MPV- 519 Waistbelt filter housing

MPV-2-K5 Disposable elasticated ‘Tyvek’ protective hood – kit of 5

MPV-456 Rubber spray gun hose (4’ long, 5/16” bore with QD fittings)

H-5824 Supply hose, PVC, 25’ long, 5/16” bore with 1/4” fittings)

MPV-458 Stowage bag for masks or visors

MPV-424 Female, self sealing, QD air line fitting

MPV-10 Male stem, QD air line fitting with 1/4” BSP(M)

MPV-5 Male stem, QD air line fitting with 1/4” BSP(F)

MPV-462 Female self sealing QD fitting with 1/4” BSP (F)

MPV-463 Kit of 4 QD fittings (2 male a 2 females)

MPV-442 Female miniature QD fittings for waistbelt to mask / visor

MPV-20 Male miniature QD stem for waistbelt to mask / visor

A single airline supplies breathing and spraying air.

Waistbelt incorporates odour filter and pre-set visor air regulator.

Breathing air is gently and quietly dispersed through the tough, lightweight visor at a positive pressure.

Vizor is supplied with both foam and fabric face seal cassettes.

The visor is hinged with adjustable crownstrap and ratchet headband.

MPV-60-K3

MPV-22

MPV-463

MPV-476-K5

MPV-477-K5


COMPLETE AIR-FED HALF-MASK OUTFIT

SpecificationProtection APF=20 ( not suitable for use with Isocyanates)

Carbon Filter Life 1000 hours

Supply Pressure 3.8 bar (55 psi) - At hose supply connection max 7 bar (100 psi)

MPV-627 OutfitPart No Description

MPV-627 Complete air-fed half-mask outfit


MPV-506-2 Complete half-mask with cotton rimlet, hood & air tube

MPV-4006 One piece protective goggles for use with half mask

MPV-486 Half mask rubber facepiece only

MPV-489-K2 Half-mask exhalation valve

MPV-17-K10 Cotton mask-to-face rimlet-kit of 10

MPV-487 Rubber strap harness for half mask

MPV-488 Half-mask clear air tube assembly with mini QD fitting

H-6085-QD 10 metre length air hose complete with male and female QD’s

H-6065-B 10 metre length air hose complete with re-usable fittings

MPV-518 Complete waistbelt with regulator, filter cartridges & QD’s

MPV-22 Replaceable waistbelt filter cartridge

MPV-455 Waistbelt regulator (does not include belt or QD)

MPV- 519 Waistbelt filter housing

MPV-2-K5 Disposable elasticated ‘Tyvek’ protective hood – kit of 5

MPV-456 Rubber spray gun hose (4’ long, 5/16” bore with QD fittings)

H-5824 Supply hose, PVC, 25’ long, 5/16” bore with 1/4” fittings)

MPV-458 Stowage bag for masks or visors

MPV-424 Female, self sealing, QD air line fitting

MPV-10 Male stem, QD air line fitting with 1/4” BSP(M)

MPV-5 Male stem, QD air line fitting with 1/4” BSP(F)

MPV-462 Female self sealing QD fitting with 1/4” BSP (F)

MPV-463 Kit of 4 QD’s fittings (2 male a 2 females)

MPV-442 Female miniature QD fittings for waistbelt to mask / visor

MPV-20 Male miniature QD stem for waistbelt to mask / visor

A single airline supplies breathing and spraying air

One piece high specification goggles are included

The facepiece incorporates dual exhalation valves and an air inlet diffuser

Waistbelt incorporates odour filter and pre-set mask air regulator

Outfit includes high quality gun hose (1.2m x 8mm bore)

MPV-60-K3

MPV-22

MPV-463

MPV-4006

H-6085-QD


“VALUAIR” HALF-MASK RESPIRATOR

Part No Description

MPV-629 Valuair Cartridge Mask complete with A2 Filter cartridges and pre-filters

MPV-492 Pair of pre-filter covers plus ten filter padsMPV-494-K2 Pack of two A2 specification filter cartridgesMPV-4006 One piece protective goggles for use with

half masks

Part No Description

MPV-496 Freedom Cartridge Mask complete with A2 Filter cartridges

MPV-4006 One piece protective goggles for use with half masks

“FREEDOM” HALF-MASK RESPIRATOR

Specification – A2 FiltersA2 filters are for use against organic vapours with boiling points above 650°C.The Valuair mask with A2 filter cartridges can therefore be used in areas of contamination up to 10 x the Occupational Exposure levels set by the Health and Safety Executive.Suitable for use with cellulose paints, primers, lacquers and varnishes but not suitable for use with Isocyanates.Assigned Protection Factor of 10.

Lightweight, dual filter, semi-disposable half mask respirator.Can be used up to a maximum of 28 daysMaintenance free and requires no spare partsLow nose bridge helps to accommodate goggles for optimum visionHeadstrap has no buckles or fasteners and is comfortable and easy to use

Specification – A2 FiltersA2 filters are for use against organic vapours with boiling points above 650°C.The Freedom mask with A2 filter cartridges can therefore be used in areas of contamination up to 10 x the Occupational Exposure levels set by the Health and Safety Executive.Suitable for use with cellulose paints, primers, lacquers and varnishes but not suitable for use with Isocyanates.Assigned Protection Factor of 10.

Lightweight, soft, pliable facepieceEasy bayonet fitting filter cartridgesComfortable elasticated / moulded headstrap cradleReplaceable A2 specification cartridges supplied as standardPre filters to extend the service life of the main filter cartridges


GRAVITY AND SUCTION CUP ACCESSORIES

Gravity Feed CupsPart No Description

GFC-501 568ml (1 Pint) Acetal gravity cup for GTI / GFG

KGP-509-1 284ml (1/2 Pint) Nylon gravity cup for GFG

SRi-510 125ml Acetal gravity cup

SRi-42-K3 Pack of 3 cone filters

SRi-478-K12 Pack of 12, 125ml gravity cups for SRi

SRi-480-K3 Black cup and lid for UV paint

GFC-402 Lid assembly for GFC-501 gravity cup

KGP-401 Lid assembly for KGP-509 gravity cup

GFC-17-K5 Washer

GFC-2-K5 Pack of 5 drip check lids

KGP-5-K5 Pack of 5 gravity cup strainers for GFC-501 & KGP-509

SRi-8-K6 Pack of 6 lids for SRi gravity cups

Suction Feed CupsPart No Description

TGC-404-E Cup Lid Assembly

TGC-407-1-K3 Valve kit of 3

TGC-9-K5 Lid Gasket - Kit of 5

KR-115-K5 Drip Free Diaphragm - Kit of 5

TGC-545-E-K Complete Cup

KR-483-K10 Kit of 10 mesh KR cup strainers – to fit 7/16” tube, 115 Micron

KR-484-K10 Kit of 10 mesh KR cup strainers – to fit 7/16” tube, 350 Micron

KR-110-K3 Kit of 3 Spot Pots


DGi PRO Digital Gauge● The most accurate digital gauge available ● Clear and easy to read, just squeeze the trigger to set● Smooth, accurate control even when wearing glovesPart No: DGIPRO-502-BAR

Professional Spray Gun Cleaning Kit● Handy tool wrap style kit of purpose made cleaning brushes and tools● Includes cleaning instructions and spray gun oil● Keeps your spray guns in top working orderPart No: KK-4584

Gravity Gun Stands● Stable metal workbench gun stands● Choice of 2 stands for 3 gravity guns or a single gun● Single gun stand is ideal for SRi guns and full size guns Part Nos: GGS-1 – 3 gun stand GFV-50F – single gun stand

Gravity Cup Filters● Effectively removes dirt, flakes and scum● Keeps the finish blemish free● Resistant to most solvents – easily cleanedPart No: KGP-5-K5 - Pack of five filters

Suction Cup Filters● Convenient, easy fit suction cup paint filters● Keeps spray gun passages clear● Removes dirt, flakes and scumPart Nos: KR-484-K10 51 mesh filter screen (general purpose) KR-483-K10 130 mesh filter screen (finer filtration)

Drip-Free Diaphragms● Prevents suction cup leaks and vent hole blockages● Allows the cup to be used at angles● Fits snugly under the cup lidPart No: KR-115-K5 (Pack of 5)

Suction Cup Lid Gaskets● Ready to use, purpose fit suction cup lid seals● Choose between Tri-Seal or traditional leather gaskets● Fits all DeVilbiss KR type suction cupsPart Nos: KR-11-K3 Tri-seal gaskets KR-69-K3 Leather gaskets

Spot Pots● 0.5 litre capacity nylon cup insert cuts down on costly paint mixes● Tapered base ensures that minimal quantities of paint can be utilised● Quickly and easily cleaned for frequent colour changes● Fits all 1 litre capacity KR type suction cupsPart No: KR-110-K3


In-Line Air Filters● Lighweight, gun mounting air filter● High efficiency action traps water, oil and dirt● Tough solvent resistant Delrin® housing with 1/4” threadsPart No: HAF-507-K12

In-Line Air Adjusting Valve● Fits neatly in-line at the gun air inlet● Increase or decrease working pressure at the gun● Calibrated up to 11 Bar (160 psi)Part No: HAV-501-B

Gun Cleaning Brushes● Ideal for a variety of gun cleaning jobs● Tough resilient bristles for useful service● Suitable size for cleaning most parts of the gunPart No: 4900-5-1-K3 Pack of 3 brushes

Duster/Blow Guns● Palm size trigger operated with diffused air flow● Low noise factor● Durable designPart No: DGD-505-E

Viscosity Cups● The fast, simple way to check out paint viscosity● Tough durable and easy to clean● Precision metal drain out insertPart No: 7000-114-K2 Pack of 2 viscosity cups

Service Kits● Service kits for GTi and JGA / GFG spray guns, complete with fluid tip and needlePart Nos: KK-4502-EX-H – JGA/GFG service kit KK-4502-FW-H – JGA/GFG service kit GTI-416-## – GTi service kit ( ## = fluid tip size)

Spray Gun Maintenance Kit● Maintenance kit for JGA, GFG, JGV, GTI-G, GTi-S, GTi-P, GTI-W and PRi● Includes, seals, springs, packing, cleaning brush, gun lube etcPart No: KK-4585

Mixing Cups● Easy to use, disposable mixing cups● Made from solvent resistant clear polypropylene ● Calibrated with a 0-600 volumetric measurement scalePart No: MC-1-K50 Pack of 50 cups

Spray Gun Service Kit● Spray gun service/repair kit for GTIPRO and SRIPROPart Nos: PRO-415-1 – Service kit


HOSE & FITTINGS

Option 110 metre length air hose complete with quality chrome replaceable 1/4” swivel nut female fittings either end.Part No: H-6065-B

● High Flow Air Hose (by the metre) and connections

● High Flow Air Hose with Connections● High air flow, high quality rubber air hose● 8mm (5/16”) bore ideal for use with conventional, compliant / HVLP spray guns, air fed breathing

equipment and other air tools.

Option 210 metre length air hose complete with crimped female quick detach connection at one end and crimped male QD fitting at the other end.Part No: H-6085-QD

MPV-5 – Male quick detach stem with 1/4” female fitting: MPV-424 – Female quick detach connection with 1/4” male fitting: MPV-10 – Male quick detach stem with 1/4” male fitting: MPV-462 – Female quick detach with 1/4” female fitting: MPV-463 – Economy pack, includes 1 of each shown above: MPV-60-K3 – Male quick detach Uni Swivel stem with 1/4” female fitting:

Option 1Air Hose Part No: H-7501- 8mm (5/16”) bore red rubber air hose

Connection Part No: PA-HC-4527- 1/4” BSP Female (8mm (5/16”) hose bore)

Option 2Air Hose Part No: H-7502- 9.5mm (3/8”) bore red rubber air hose

Connection Part No: PA-HC-4528- 1/4” BSP Female (9.5mm (3/8”) hose bore)

Option 1Fluid Hose Part No: H-75036mm (1/4”) bore black rubber fluid hose

Connection Part No: PA-HC-45433/8” BSP Female (6mm (1/4”) hose bore)

Option 2Fluid Hose Part No: H-75049.5mm (3/8”) bore black rubber fluid hose

Connection Part No: PA-HC-45483/8” BSP Female (9.5mm (3/8”) hose bore)

Quick detach fittings● High flow connections – minimal pressure drops● Ideal for spray guns, respirators, hoses and regulators

● Fluid Hose (by the metre) and connections

Option 310 metre length air hose complete with crimped female quick detach connection at one end and crimped female loose nut fitting at the other end.Part No: H-6086-B


COMPLIANT SUCTION & PRESSUREFEED SPRAY GUNS

DGIPRO-502-BAR

KR-484-K10

MPV-60-K3

PRO-415-1

SpecificationAir Inlet Pressure H1, T1, T2, T3 & T4 air caps 2.0 bar (30 psi)Air Consumption H1: 450 l/min (16 cfm) @ 2.0 bar (30 psi) T1: 280 l/min (10 cfm) @ 2.0 bar (30 psi) T2: 350 l/min (12 cfm) @ 2.0 bar (30 psi) T3: 345 l/min (12 cfm) @ 2.0 bar (30 psi) T4: To be confirmed in 2009Air inlet thread Universal 1/4” BSP/NPSFluid inlet thread Universal 3/8” BSP/NPS

GTi Pro Suction / Pressure Spray Gun KitsWhen ordering please specify the air cap and nozzle size required.Part No Examples DescriptionGTISPRO-T1-16 Suction Feed Gun with T1 air cap and No. 16 fluid nozzleGTIPPRO-T2-085 Pressure Feed Gun with T2 air cap and No. 085 fluid nozzle

Kit contents are spray gun, (suction cup with filter if appropriate), Torx key, brush and multi-fit spanner

AccessoriesPart No DescriptionPRO-100-H1-K HVLP Air Cap and retaining ring PRO-100-T1-K Trans-Tech Air Cap and retaining ring PRO-100-T2-K Trans-Tech Air Cap and retaining ring PRO-100-T3-K Trans-Tech Air Cap and retaining ring PRO-100-T4-K Trans-Tech Air Cap and retaining ring PRO-200-**-K Suction/Pressure Fluid Nozzles- Size Numbers 16, 18 & 20PRO-315-K Suction/Pressure Fluid Needle for 16, 18 & 20 Nozzle sizesPRO-205-**-K Pressure Fluid Nozzle Size Numbers 085, 10, 12 & 14PRO-305-085-10-K Pressure Fluid Needle for 085 & 10 Nozzle sizesPRO-305-12-14-K Pressure Fluid Needle for 12 & 14 Nozzle sizesPRO-415-1 Spray Gun Service/Repair Kit SPN-8-K2 Torx & flat blade Screwdriver - Trigger & Needle Packing SN-28-K Spanner Ring for fluid tip and open end for valves/inlet DGIPRO-502-BAR Digital Gauge - Reads in bars MPV-60-K3 Male Quick Detach Uni Swivel - fits to gun air inlet HAF-507-K12 Lightweight in-line air filter. 4900-5-1-K3 Pack of three cleaning brushes

** = Fluid tip size

Totally redesigned GTi Pro gun for suction or pressure feed duty New, more ergonomic gun body with improved fit, feel, comfort and controls.Suitable for use with a suction cup or pumps, tanks or remote feed cups.Four compliant air cap choices to suit solids, metallics, bases and clears.A range of pressure & suction nozzle sizes for varying viscosities and control preferences. Utilises new air valve design for ultra smooth triggering and control.Renowned DeVilbiss atomisation quality and even paint distribution.Faster, easier maintenance from user-friendly fittings and adjustments.Rugged drop forged body with anodised finish for protection.


GTISPRO (or GTIPPRO) - T1 - XX Model Air Cap Fluid Tip

No H1 HVLPAir Cap



Max static air inlet pressure

P1 = 12 bar (175 psi)

Max static fluid inlet pressure

P2 = 14 bar (203 psi)

Air cap & ring Plated BrassFluid Nozzle & Needle Stainless SteelSuction gun & cup weight 1070 gmsPressure gun weight 650 gms


GTiP-Pro only


GTiP-Pro only


COMPLIANT SUCTION AND PRESSURE FEED SPRAY GUNS

SpecificationAir Inlet Pressure 2.0 Bar (29psi)

Air Consumption (510 Air Cap) 283 l/min (10cfm)

Air Inlet Thread 1/4” Universal (m)

Cup Capacity 1 litre

Weight (Suction) 934 gm

Weight (Pressure) 435 gm

Air Cap & Ring Plated Brass

Fluid Tip Stainless Steel

Fluid Needle Stainless Steel


CVi - S/P - 510 - B - 18 Model Suction/Pressure Air Cap Blue Fluid Tip

CVi Spray Gun KitsPart No Description

CVi-S510B-16 Gun and Cup – 510 Air Cap & 1.6mm Fluid Tip + alternative 1.8 Tip

CVi-P523B-085 Gun – 523 Air Cap & 0.85mm Fluid Tip + alternative 1.4 Tip

Kit includes either CVi Pressure or Suction gun &1 litre cup (suction), seal insertion tool and multi fit spanner

No 510 Trans-Tech Air Cap


SP-100-510-K Air Cap and retaining ring

SPK-401-** Service Kit, includes fluid tip (0.85, 1.0, 1.4, 1.6, 1.8, 2.0 or 2.2), needle, seals etc

DGIPRO-502-BAR Digital pressure gauge – reads in bars

HAF-507-K12 Lightweight, in-line air filter (pack of 12)

MPV-60-K3 Male quick detach Uni swivel stem to fit onto gun air inlet

4900-5-1-K3 Pack of three cleaning brushes

KR-483-K10 Kit of 10 mesh KR cup strainers (115 micron) (S)

KR-484-K10 Kit of 10 mesh KR cup stainers (350 micron) (S)

KR-115-K5 Kit of 5 drip free diaphragms (S)

VSA-512 Strainer for fluid inlet – 60/112/280 micron mesh (P)

TGC-545-E-K 1 litre suction cup and lid assemblyNB: (S) = Suction gun only / (P) = Pressure gun only. ** = Fluid tip size.

Renowned DeVilbiss atomisation quality and paint distributionRobust construction with forged aluminium body for a long working lifeAvailable in either suction or pressure feedEasy Air Cap positioning and re-positioningPrecision high grade Stainless steel fluid tips and needlesReduced overspray and significant material savingsLarge capacity 1 litre suction cup for larger area CV work

KR-484-K10

KR-115-K5

MPV-60-K3

DGIPRO-502-BAR


PROFESSIONAL CONVENTIONALSUCTION & PRESSURE FEED SPRAY GUN

DGIPRO-502-BAR

KR-484-K10

MPV-60-K3

PRO-415-1

SpecificationAir Inlet Pressure C1: 2.5 - 3.0 bar (30 - 45 psi)

C2: 2.5 - 4.0 bar (30 - 58 psi)C3: 2.5 - 4.0 bar (30 - 58 psi)

Air Consumption C1: 300 l/min (10.6 cfm) @ 3.0 barC2: 305 l/min (12.8 cfm) @ 3.0 barC3: 410 l/min (14.5 cfm) @ 3.0 bar

Air Inlet Thread 1/4” Universal

JGA-Pro Spray Gun KitsWhen ordering please specify the air cap (C1, C2 or C3) and the tip size of choice (12, 14, 16, 18 or 085).Part No Examples DescriptionJGASPRO-C1-16 Suction Feed Gun with C1 air cap and No. 16 fluid tipJGAPPRO-C3-085 Pressure Feed Gun with C3 air cap and No. 085 fluid tip

Kit includes JGA PRO gun, cup & paint filter (suction), Torx key, brush and multi-fit spanner

No C1 Air Cap

AccessoriesPart No DescriptionPROC-120-C1-K C1 Air Cap and retaining ring PROC-120-C2-K C2 Air Cap and retaining ring PROC-120-C3-K C3 Air Cap and retaining ring PROC-220-**-K Suction Fluid Nozzle Size Numbers 16 or 18 JGAPRO-330-K Suction Fluid Needle for 16 or 18 Fluid Nozzles PROC-230-**-K Pressure Fluid Nozzle Size Numbers 085, 10, 12 or 14 PRO-305-085-10-K Pressure Fluid Needle to match 085 & 10 Nozzle sizes PRO-305-085-12-14-K Pressure Fluid Needle to match 12 & 14 Nozzle sizes PRO-415-1 Spray Gun Service/Repair Kit SPN-8-K2 Torx & flat blade Screwdriver for - Trigger & Needle Packing SN-28-K Spanner Ring for fluid tip and open end for valves/inlet DGIPRO-502-BAR Digital Gauge - Reads in bars MPV-60-K3 Male Quick Detach Uni Swivel - fits to gun air inlet HAF-507-K12 Lightweight in-line air filter. 4900-5-1-K3 Pack of three cleaning brushes KR-484-K10 Pack of 10 suction cup paint strainers

** = Fluid nozzle size

Totally redesigned JGA gun for professional use.Renowned DeVilbiss atomisation quality and even paint distribution. Utlises new air valve design for ultra smooth triggering and control. Rugged drop forged body with anodised finish for protection.A choice of two advanced technology air caps to suit solids and metallics. Three fluid tip sizes for varying viscosities and control preferences.New, more ergonomic gun body with improved fit, feel, comfort and control.Faster, easier maintenance from user-friendly fittings and adjustments.

No C2 Air Cap

Fluid Inlet Thread 3/8” UniversalCup Capacity 1000 mlsWeight (gun & cup, S) 1070 gmsWeight (gun, P) 650 gmsAir Cap & Ring Plated BrassFluid Tip Stainless SteelFluid Needle Stainless Steel

No C3 Air Cap


JGASPRO (or JGAPPRO) - C1 - XX Model Air Cap Fluid Tip


KBII 2.3 LITREREMOTE CUP

2.3 litre capacity –greater area coverage,less refills.Aluminium or stainlesssteel options (for waterbasematerials).Familiar gun grip handleplus belt hook for operatorconvenience. At-the-job controls with lidmounted pressure gauge.Available complete with short cup to gunair and fluid hosesKB disposable liners make cleaning and colour changes fast and simple.

SpecificationAir Inlet and outlet connections threads 1/4” BSP (M)Fluid outlet connection (to spray gun) 3/8” BSP (M)Maximum working pressure 2.1 Bar (30 psi)Maximum air supply pressure 8.6 bar (125 psi)Height 183 mmWeight (less hoses) 1.76 kgCup Capacity 2.3 litres

Spray Gun Kits for use with KBIIPart No DescriptionGTIPPRO-**-*** Pressure Feed Gun with either H1, T1, T2 or T3 air cap and either 085, 10, 12, 14, 16,

18 or 20 fluid nozzleJGAPPRO-**-*** Pressure Feed Gun with either C1, C2 or C3 air cap and either 085 12, 14, 16 or 18

fluid nozzle Kit contents are spray gun, (suction cup with filter if appropriate), Torx key, brush and multi-fit spanner** = Air Cap / *** = Fluid Tip

KBII Remote Cup kitsPart No DescriptionKB-522-B Aluminium Remote Cup without hosesKB-522-SSB Stainless Steel Remote Cup without hosesKB-622-B Aluminium Remote Cup complete with air and fluid hoses

AccessoriesPart No DescriptionKB-422 Aluminium 2.3 Litre KBII Spare Cup Only for KB-522KB-442 Stainless Steel 2.3 Litre KBII Spare Cup Only for KB-522-SSKK-5051 Kit of 20 disposable liners plus lid diaphragmsH-6066-B 1.2m Air Hose Assembly with BSP FittingsH-6067-B 1.5m Fluid Hose Assembly with BSP Fittings

KK-5051

KB-422


BINKS DVP DOUBLE DIAPHRAGM PUMP

SpecificationPump Ratio 1:1

Regulated air pressure 7 bar

Max. paint viscosity (ford 4) 60 sec

Universal threaded fluid connector 1/4”

Max. temperature 90°C

Recommended operating speed: Cycle/min 60

Max. fluid pressure 7 bar

Max. fluid flow 8.5 l/min

Universal fluid threaded connector 3/8”

Choice of pail or wall-mounted outfits

Rapid delivery of up to 8.5 litres per minute

Even material flow at up to 60 cycles / minute

Economic air consumption at pressures up to7 bar (100psi)

Designed for quick flushing and materialchanges

Part No DescriptionDVP-610 Compact double diaphragm fluid pump. Complete with “Euro” lid for pail mounting (Pail

not included)DVP-630 Compact double diaphragm fluid pump for wall mounting. Complete with wall mounting

bracket and suction wand.H-7501PA-HC-4527

8mm (5/16”) bore red rubber air hose1/4” BSP Female (8mm (5/16”) hose bore)

H-7502PA-HC-4528

9.5mm (3/8”) bore red rubber air hose1/4” BSP Female (9.5mm (3/8”) hose bore)

H-7503PA-HC-4543

6mm (1/4”) bore black rubber fluid hose3/8” BSP Female (6mm (1/4”) hose bore)

H-7504PA-HC-4548

9.5mm (3/8”) bore black rubber fluid hose3/8” BSP Female (9.5mm (3/8”) hose bore)

Spray Gun Kits for use with DVP Pump OutfitsPart No DescriptionGTIPPRO-**-***

Pressure Feed Gun with either H1, T1, T2 or T3 air cap and either 085, 10, 12, 14, 16, 18 or 20 fluid nozzle

JGAPPRO-**-***

Pressure Feed Gun with either C1, C2 or C3 air cap and 085 12, 14, 16 or 18 fluid nozzle

Kit contents are spray gun, (suction cup with filter if appropriate), Torx key, brush and multi-fit spanner** = Air Cap / *** = Fluid Tip

Repair KitsPart No Repair Kit Reference DescriptionDVP-114-K6 A Kit of 6 gasketsKK-4630 B Diaphragm and stud kitKK-4631 C Standard fluid valve kitKK-4633 E Reverse switch kitKK-4634 F Pneumatic distributor

Hose by the metreH-7501 &

PA-HC-4527


PA-HC-4543


AIR ASSISTED AIRLESS PUMP OUTFITSHigh efficiency economical air consumptionSimple handlingReliable and low maintenanceEasy to cleanPump components made of Stainless Steel for operation with water-borne spray materialsLow noise level in operationSuitable for use with waterborne and solvent based paints

SpecificationPump Ratio 32:1

Volume per cycle – HP4/32Volume per cycle – HP10/32

27cm3

72cm3

Free Flow Capacity – HP4/32Free Flow Capacity – HP10/32

4.0 l/min10.0 l/min

Operating Pressure max. 256 bar

Air consumption – HP4/32Air consumption – HP10/32

120 to 800 l/min120 to 1200 l/min

Air Connection R 3/8” AG

Air Assisted Airless Pump OutfitsPart No Description

HP-0432C-AAA Air Assisted Airless High Pressure Pump – mobile: 4 l/min - Consisting of: pump, chassis, high pressure filter, AirCombi pressure regulator, suction pipe plus gun, hoses and tip.

HP-1032C-AAA Air Assisted Airless High Pressure Pump – mobile: 10 l/min - Consisting of: pump, chassis, high pressure filter, AirCombi pressure regulator, suction pipe plus gun, hoses and tip.

Spray Gun Kits for use with Air Assisted Airless Pump OutfitsPart No Description

AA4000 Aircombi Spray Guns (without nozzle)

114-00908 Nozzle 0.23 mm - Spray angle 40°



**other nozzles available on request


0110-009132 Filter insert for high pressure filter 100 mesh



7720-01-K3 Disc filter fine - 127 µ

7720-02-K3 Disc filter coarse - 230 µ

0114-016015 Connection for 2nd spray gun (only for version 10/32)


BINKS PRESSURE FEED TANK

SpecificationTank Capacity 9.5 litre

Maximum working Pressure 5.5 bar (80psi)

Safety Valve Set Pressure 5.5 bar (80psi)

Air Inlet Size 1/4” BSP (M)

Fluid Outlet Size 3/8” BSP (M)

Tank Shell SA-620 H.R Steel Zinc plate 2.7mm (8 gauge)

Tank Lid SA-414 H.R Steel Zinc plate 4.2mm (3/16”)

Fluid Tube Steel, Galvanised Zinc Plate

Air Manifold CRS Zinc Plated

Fluid Outlet Steel, Galvanised Zinc Plate

Lid Gasket Santoprene

Spray Gun Kits for use with KBIIPart No Description

GTIPPRO-**-*** Pressure Feed Gun with either H1, T1, T2 or T3 air cap and either 085, 10, 12, 14, 16, 18 or 20 fluid nozzle

JGAPPRO-**-*** Pressure Feed Gun with either C1, C2 or C3 air cap and 085 12, 14, 16 or 18 fluid nozzle

Kit contents are spray gun, (suction cup with filter if appropriate), Torx key, brush and multi-fit spanner** = Air Cap / *** = Fluid Tip

Pressure Feed TankPart No Description

83C-210-CE 9.5 litre capacity zinc plated tank and lid assembly

PT-78-K10 Kit of 10 polyethylene inner liners for 9.5 litre capacity tank

VS-521 Paint filter (100 mesh) and housing – fits directly onto fluid outlet of tank

H-7501PA-HC-4527

8mm (5/16”) bore red rubber air hose1/4” BSP Female (8mm (5/16”) hose bore)

H-7502PA-HC-4528

9.5mm (3/8”) bore red rubber air hose1/4” BSP Female (9.5mm (3/8”) hose bore)

H-7503PA-HC-4543

6mm (1/4”) bore black rubber fluid hose3/8” BSP Female (6mm (1/4”) hose bore)

H-7504PA-HC-4548

9.5mm (3/8”) bore black rubber fluid hose3/8” BSP Female (9.5mm (3/8”) hose bore)

Zinc plated tank shell for long service life

Single regulator and gauge to control tank and air pressure

Zinc plated lid assemblies for solvent based coatings

Positive 4 point lid clamping for secure operation

High density polyethylene, tank liners ensure efficient use

PT-78-K10


PA-HC-4527


PA-HC-4543


ECONOMY FILTER REGULATORS AND COALESCERSFLFR-1 Filter RegulatorAir filtration down to 20 micronsHigh quality manufactureAir flow of 70cfm (at 7 bar – 100psi inlet pressure)Lockable and removable (tamperproof) control

Regulator AssembliesPart No. Description

FLFR-1 Single outlet Filter Regulator (70cfm)

FLCF-1 Coalescing (fine oil) filter (25cfm)

FLRC-1 Single outlet Filter Regulator Coalescer

FLRCAC-1 Single outlet filter regulator coalescer with activated carbon filter

9450102 Replacement filter element

FLCF-1 Coalescing FilterA 3/8” (port size) coalescing (fine oil) filter

Air filtration down to 0.01 microns (suitable for breathing air-fed visors/masks)

Replaceable filter elementMaximum working pressure 18 bar (260 psi)

FLFR-1

FLCF-1

FLRC-1

FLRC-1 – Filter Regulator CoaslescerCompact, low cost single operator Filter Regulator and CoalescerFiltration down to 0.01 microns suitable for air mask or visorNot suitable for low bake temperatures

FLRCAC-1 Filter Regulator Coalescer with Activated Carbon Filter

High efficiency filter designed to remove dirt, liquid oil and water from spraying and breathing air.

Filtration down to 0.01 microns plus activated carbon filter removing contaminants down to 0.003ppm.

FLRCAC-1

Part No. Description

XA-12 Replacement coalescing filter element

AC-12 Replacement activated carbon filter

9450802 Upper Cover

9450301 Metal Bowl

GA-319 Gauge

FLRCAC-1


Rage Gold - Premium Grade FillerFormulated with Hattonite for lubricated application and to reduce frictional heat during sanding. Stainresistant for use with base / clear systems. Available in cartridge form for use with wall mounting dispenser machine.Container size: 1.5 Litre tin plus tube of hardener Part No: FE101668-RGCartridge size: 1.6 Litre cartridge plus hardener cartridge Part No: FE104168-RGDIS

Z-Grip - Non-Clogging Lightweight FillerProvides superior surface adhesion and corrosion resistance on steel and aluminium. Easy, non-clog sanding.Available in cartridge form for use with wall mounting dispenser machine.Container size: 3 litre tin plus tube of hardener Part No: FE101667-ZGCartridge size: 1.6 Litre cartridge plus hardener cartridge Part No: FE104167-ZGDIS

Easy Sand - Pourable blending putty to intermix with Evercoat fillersTan coloured flowable polyester glazing putty for filling pinholes and grind marks. Self levels and is ideal forskim coats. Available in pump action dispenser or 709ml tube.Container size: 900ml pump action dispenser plus tube of hardener Part Number: FE101669-ESTube size: 709ml Tube Part Number: FE104114-EST

Lite-Weight - High quality, clog free, lightweight body fillerGreat value with its smooth spreading, easy sanding features. Non-clog formula adds greater value insandpaper savings. Blue cream hardener included.Container size: 3 litre tin plus tube of hardener Part No: FE101340-LW

Fiber Tech - Reinforced fillerA multi-fibre reinforced filler with Kevlar. Has the bridging capability of a long-strand fibre and density of a short strand fibre. Kevlar adds superior strength when used on thin applications. Can be used on bare steel, galvanized steel, aluminium, fibreglass and rigid plastics.Pouch size: 814gr Part No: FE104116-FTP

Plastic Repair Adhesive - Fast Set UrethaneA two component urethane repair material that provides incredible strength and stability with a fast cure time. This urethane material is used for non-structural repairs on fibreglass and automotive plastics.Cartridge size: 250 ml Part No: FE104187Adhesive Mixing Tips Pack of 12 Part No: FE100817

Metal Bonding Adhesive - Fast SetA fast setting modified acrylic adhesive for metal to metal surfaces. This adhesive is used for replacing door skins, roofs, quarter panels, truck bedsides and other non-structural panels. Has excellent adhesion to bare steel, galvanised steel and e-coated panels.Cartridge size: 250 ml Part No: FE104112Adhesive Mixing Tips Pack of 12 Part No: FE100817

Manual Caulking GunManually operated 26:1 caulking gun to be used with Evercoat’s adhesive products. Part No: FE100830

HardenerFast, effective hardener – supplied with above products and also available separately.Tube size: 28g tube or 78g tube. Part No: FE101474 (28g) Part No: FE101475 (78g)

Durable Plastic SpreadersFor fast, smooth application of fillers and putties. Flexible, durable and reusable.Pack of 3 spreaders Part No: FE100381

Mixing PaletteMade from smooth, durable, heavy duty plastic. Bows for ease of clean up.12” x 12” mixing area Part No: FE100155





2101004 ADAPTOR M/M 1/4”BSPF2101005 1/4BSP X 3/8BSP MALE NIPPLE2101007 NIPPLE 3/8” - 3/8”2113002 F/F/M TEE FITTING 1/4 BSP9351706 FILTER9351711 FILTER ELEMENT9450102 FILTER ELEMENT 20 MICRON9450301 FILTER BOWL & S/A DRAIN9450802 UPPER COVER - REGULATOR23165-001 PTFE SEAL 7/16”OD X 1/32”SQ.25746-007-K5 RETAINING RING (PACK OF 5)4900-5-1-K3 CLEANING BRUSHES - KIT OF 37000-114-K2 VISCOSITY CUPS (FORD 4)83-2727 GAUGE-100# (BOTTOM)83-4233 D.M. NIPPLE 1/4” X 3/8”83C-210-B 2.8 US GAL P.F.TANK-1regAD-11 NIPPLE 3/8”NPSM X 3/8”NPTAV-1239-4UZ AIR CAPAV-4239-186 AIR CAP/RETAINING RING 186AV-4239-30 NEW “30” AIR CAP/RET.RINGAV-4239-43 AIR CAP/RETAINING RINGAV-4239-765 AIR CAP/RETAINING RINGAV-645-EX FLUID TIP - STS. (1.8mm)AV-645-FF FLUID TIP - STS. (1.4mm)AV-645-FW FLUID TIP - STS. (1.6mm)AV-645-FX FLUID TIP - STS. (1.1mm)CVI-P523B-085 CVi PRESS SPRAYGUN.TRANSTECHCVI-S510B-16 CVI SUCTION GUN/CUP.TRANSTECHDB-40003 DISPLAY BOARD.10 X KR-11-K3DB-40007 DISPLAY BOARD.10 X KR-484-K2DB-40014 DISPLAY BOARD.10 X GL-1-K10DB-40015 DISPLAY BOARD.8 X GTI-445-K2DB-424 DISPLAY BOARD.6 X KR-115-K5DB-426 DISPLAY BOARD.10X4900-5-1-K3DGD-505-E DUSTER GUNDGIPRO-502-BAR DIGITAL PRESSURE GAUGE (BAR)DGR-101 CROWN CAPDGR-103-35 AIR CAP (FOR .35mm NOZZLE)DGR-104 HEAD CAPDGR-105-35 NOZZLE ( .35mm)DGR-106K PACKING & NUT ASSEMBLYDGR-107 AIR VALVE CASINGDGR-108K AIR VALVE KITDGR-109 TRIGGER ASSYDGR-110K NEEDLE GUIDE,ROCKER & SPRINGDGR-111 SPRING GUIDEDGR-112 NEEDLE LOCKNUTDGR-113-35 NEEDLE (FOR .35mm NOZZLE)DGR-114 CUTAWAY HANDLE W/PRESETDGR-116 PRESET NEEDLE KNOBDGR-117 1/4 OZ (7cc) CUP & LIDDGR-118 1/3 OZ (9cc) CUP & LIDDGR-119 1/2 OZ (14cc) CUP & LIDDGR-120 CUP LIDDGR-121K DAGR REPAIR KITDGR-122K TRIGGER BUTTONS ERGO PACKDGR-123 10’ BRAIDED AIR HOSEDGR-124 10’ BRAIDED AIR HOSE WITH QDDGR-125 20’ BRAIDED AIR HOSEDGR-126 20’ BRAIDED AIR HOSE WITH QDDGR-127 QUICK DISCONNECT SETDGR-128-K2 QUICK DISCONNECT ADAPTORSDGR-129 ADAPTOR - PAASCHEDGR-130 REG,GAUGE & MOISTUREDGR-131 ADAPTOR - BADGERDGR-132 AIRBRUSH HOLDERDGR-501G-35 DAGR AIRBRUSHDMG-501-K DRYNAMIC GUN ASSYDMG-5-K3 DRYER INLET FILTERS (3 PACK)DMG-620 AIR DRYER STAND/2 DRYERS KITDV-8000035 ISOLATION VALVE 1/2”DV-9350811 UPPER COVER-DVFR-3 REGULATORDV-9353301 FILTER BOWL FOR DVFR-3DV-9420601 DVFR BOWL WRENCHDV-9450806 DVFR UPPER COVER

DV-9451705 DVFR FILTERING ELEMENT(5 Mic)DV-9451706 FILTER ELEMENT 20 MICRONDV-9451711 DVFR FINE FILTERING ELEMENTDV-9451711AC ACTIVE CARBON FILTER ELEMENTDV-9453301-MET DVFR FILTER BOWL & DRAINDVCF-1 COALESCER 1/2” BSPDVFR-1 FILTER REGULATOR ASSEMBLYDVFR-2 FILTER REGULATOR/COALESCERDVFR-3 FILTER REGULATORDVFR-8 FILTER REGULATOR/COALESCERDVP-114-K6 GASKET (PACK OF 6)DVP-610 COMPACT PUMP.STD.EURO LIDDVP-630 COMPACT PUMP.STD.WALL MOUNTFE100155 EVERCOAT MIXING BOARDFE100381 EVERCOAT SPREADERS(PACK OF 3)FE100524 EVERCOAT SPREADERFE101474 EVERCOAT HARDENER.1 OZ.TUBEFE101475 EVERCOAT HARDENER.2.75OZ.TUBEFLCF-1 COALESCER 3/8”INLET.1/4”OUTFLFR-1 FILTER REG.3/8”INLET.1/4”OUTFLG-0001-5 AIRCAP No5 TRANSTECHFLG-1-3 AIR CAP No.3 (FLG3)FLG-301 AIR CAP RETAINING RING(FLG3)FLG-302-15K FLUID TIP & GASKET KIT(FLG3)FLG-302-18K FLUID TIP & GASKET KIT(FLG3)FLG-304-K5 FLUID TIP GASKETS X 5 (FLG3)FLG-305 BAFFLE (FLG3)FLG-311 FLUID NEEDLE (FLG3)FLG-488 REPAIR KIT (FLG3)FLRC-1 FILTER REG./COALESCERGA-319 GAUGE (0-160 LB/SQ IN)GA-355 AIR PRESS GAUGE (KBII) 0-30PSIGA-382 AIR PRESSURE GAUGE (0-145 PSI)GFC-17-K5 WASHER - GFC CUP (PACK OF 5)GFC-2-K5 DRIP CHECK LID - KIT OF 5GFC-402 LID C/W DRIP CHECK - 1 PINTGFC-501 GRAVITY CUP - 1 Pt ACETALGFG-6 GUN HOOKGFGPRO-320-K FLUID NEEDLEGFGPRO-C1-14 GRAVITY GUN & CUP,CONVENTIONALGFGPRO-C1-16 GRAVITY GUN & CUP,CONVENTIONALGFGPRO-C2-18 GRAVITY GUN & CUP,CONVENTIONALGFV-50-F GRAVITY GUN STAND (1 GUN)GGS-1 GRAVITY GUN STAND (3 GUNS)GL-1-K10 GUN LUBE.PACK OF 10 SACHETSGTI-108 TRIGGERGTI-213-085-K FLUID TIP (.085mm) Grav/SuctGTI-213-10-K FLUID TIP (1.0mm) Grav/SuctGTI-213-11-K FLUID TIP (1.1mm) Grav/SuctGTI-213-12-K FLUID TIP (1.2mm) Grav/SuctGTI-213-13-K FLUID TIP (1.3mm) Grav/SuctGTI-213-14-K FLUID TIP (1.4mm) Grav/SuctGTI-213-15-K FLUID TIP (1.5mm) Grav/SuctGTI-214-16-K FLUID TIP (1.6mm) Hi-FlowGTI-214-18-K FLUID TIP (1.8mm) Hi-FlowGTI-214-20-K FLUID TIP (2.0mm) Hi-FlowGTI-214-22-K FLUID TIP (2.2mm) Hi-FlowGTI-33-K5 BAFFLE SEALS (PACK OF 5)GTI-402-K GUN BODY BUSHINGGTI-404-K SPREADER VALVE - GRAVITY GUNGTI-405-K SPREADER VALVE-SUCT/PRES GUNGTI-407-110 AIR CAP/RINGGTI-407-115 AIR CAP/RINGGTI-407-123 AIR CAP/RING-PRESSUREGTI-408-K5 TRIGGER STUD & SCREW (5 PACK)GTI-409-K5 NEEDLE SPRING & PAD (5 PACK)GTI-413-K FLUID NEEDLE - GRAV/SUCT.STSGTI-414-K NEEDLE ADJUSTING SCREWGTI-415-K AIR FLOW VALVEGTI-416-12 SERVICE KIT - GRAVITY/SUCTIONGTI-416-13 SERVICE KIT - GRAVITY/SUCTIONGTI-416-14 SERVICE KIT - GRAVITY/SUCTIONGTI-416-15 SERVICE KIT - GRAVITY/SUCTIONGTI-416-16 SERVICE KIT - GRAVITY/SUCTIONGTI-416-18 SERVICE KIT - GRAVITY/SUCTION


GTI-416-20 SERVICE KIT - GRAVITY/SUCTIONGTI-416-22 SERVICE KIT - GRAVITY/SUCTIONGTI-420-K FLUID NEEDLE-GRAV/SUCT.H/FLOWGTI-425-K BAFFLE & SEAL ASSYGTI-428-K5 SEAL & PIN KIT (5 PACK)GTI-445-K2 NEEDLE PACKING KIT OF 2GTI-449-10-K GTI PRESSURE NEEDLEGTI-449-12-K GTI PRESSURE NEEDLEGTI-449-14-K GTI PRESSURE NEEDLEGTI-450-110-12 CAP.TIP & NEEDLE KITGTI-450-110-13 CAP.TIP & NEEDLE KITGTI-450-110-14 CAP.TIP & NEEDLE KITGTI-450-110-15 CAP.TIP & NEEDLE KITGTI-450-110-16 CAP.TIP & NEEDLE KITGTI-450-110-18 CAP.TIP & NEEDLE KITGTI-450-110-20 CAP.TIP & NEEDLE KITGTI-450-115-13 CAP.TIP & NEEDLE KITGTI-450-115-14 CAP.TIP & NEEDLE KITGTI-450-115-15 CAP.TIP & NEEDLE KITGTI-455-16 HIGH FLOW TIP/NEEDLE KITGTI-455-18 HIGH FLOW TIP/NEEDLE KITGTI-455-20 HIGH FLOW TIP/NEEDLE KITGTI-455-22 HIGH FLOW TIP/NEEDLE KITGTI-459-115 TEST AIR CAP & GAUGE KITGTIPPRO-H1-085 PRESSURE FEED PRO SPRAYGUNGTIPPRO-H1-10 PRESSURE FEED PRO SPRAYGUNGTIPPRO-H1-12 PRESSURE FEED PRO SPRAYGUNGTIPPRO-H1-14 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T1-085 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T1-10 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T1-12 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T1-14 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T1-18 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T2-085 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T2-10 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T2-12 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T2-14 PRESSURE FEED PRO SPRAYGUNGTIPPRO-T2-18 PRESSURE FEED PRO SPRAYGUNGTIPRO-H1B-12 GRAVITY GUN & CUP - BASEGTIPRO-H1B-13 GRAVITY GUN & CUP - BASEGTIPRO-H1B-14 GRAVITY GUN & CUP - BASEGTIPRO-H1C-13 GRAVITY GUN & CUP - CLEARGTIPRO-T1B-12 GRAVITY GUN & CUP - BASEGTIPRO-T1B-13 GRAVITY GUN & CUP - BASEGTIPRO-T1C-12 GRAVITY GUN AND CUP - CLEARGTIPRO-T1C-13 GRAVITY GUN & CUP - CLEARGTIPRO-T1C-14 GRAVITY GUN & CUP - CLEARGTIPRO-T2B-12 GRAVITY GUN & CUP - BASEGTIPRO-T2B-13 GRAVITY GUN & CUP - BASEGTIPRO-T2C-12 GRAVITY GUN & CUP - CLEARGTIPRO-T2C-13 GRAVITY GUN & CUP - CLEARGTISPRO-H1-16 SUCTION FEED PRO SPRAYGUN KITGTISPRO-H1-18 SUCTION FEED PRO SPRAYGUN KITGTISPRO-H1-20 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T1-16 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T1-18 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T1-20 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T2-16 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T2-18 SUCTION FEED PRO SPRAYGUN KITGTISPRO-T2-20 SUCTION FEED PRO SPRAYGUN KITH-2008 ADAPTOR M/M 1⁄4”NPTx1⁄4”NPS/BSPH-5824 AIR HOSE.5/16”ID.25FT.1/4BSPFH-5825 AIR HOSE.5/16”ID.50FT.1/4BSPFH-6065-B AIR HOSE.5/16”ID.10M.1/4BSPFH-6066-B AIR HOSE.5/16”ID.4FT BSPFH-6067-B FLUID HOSE.1/4”ID.4.75FT BSPH-6085-QD AIR HOSE.5/16”ID.10M.M&F QDsH-6086-B 10M AIR HOSE WITH FITTINGSH-7501 RUBBER AIR HOSE -5/16”IDH-7502 RUBBER AIR HOSE 3/8” I/DH-7503 FLUID HOSE 1/4” I/DH-7504 FLUID HOSE 3/8” I/DHAF-507-K12 DISPOSABLE AIR FILTERSHAR-511 AIR REGULATORHAV-501-B AIR ADJ.VALVE WITH GAUGE BSPHC-616 HOSE CONNS 3/8”BSPF - 3/8”HC-622 HOSE CONNECTION - 1/4”BSPFJGA-156-K5 KIT OF 5 RETAINING CLIPS

JGA-158 AIR INLET ADAPTOR 1/4”JGA-159-K FLUID INLET & SEAL(UNIVERSAL)JGA-17 GUN BODY BUSHINGJGA-421-DEX-K FLUID NEEDLE KIT - H.G.STSJGA-421-FF-K FLUID NEEDLE KIT - H.G.STSJGA-421-FW-K FLUID NEEDLE KITJGA-421-FX-K FLUID NEEDLE KIT - H.G.STSJGA-51-K5 LOCKNUT - KIT OF 5JGAPPRO-C1-18 PRESSURE SPRAYGUNJGAPPRO-C2-18 PRESSURE SPRAYGUNJGAPPRO-C3-085 PRESSURE SPRAYGUNJGAPPRO-C3-10 PRESSURE SPRAYGUNJGAPPRO-C3-12 PRESSURE SPRAYGUNJGAPPRO-C3-14 PRESSURE SPRAYGUNJGAPRO-330-K FLUID NEEDLE(JGAPRO P/S 16->)JGASPRO-C1-16 SUCTION SPRAYGUN AND CUP KITJGASPRO-C1-18 SUCTION SPRAYGUN AND CUP KITJGASPRO-C2-18 SUCTION SPRAYGUN AND CUP KITJGD-14-K5 SEALS - KIT OF FIVEJGD-402-K BAFFLE HEAD & SEAL KITJGK-449-K AIR VALVEJGS-72-K5 GASKET - KIT OF FIVEJGV-262-K5 AIR VLV.SPRING.STS-KIT OF 5K-5030 BAFFLE KIT FLG5K-5040 SERVICE KIT FLG5KB-101-K5 SEAL - KIT OF 5KB-422 CUP KBIIKB-428-1 REGULATOR ASSY (0-30 PSI)KB-432-K3 CHECK VALVE ASSY (PACK OF 3)KB-433 FLUID TUBE. STS - BSPKB-442 CUP ONLY (KBII) STAINLESSKB-444 CHECK VALVE ASSYKB-522-B KBII 2LTR PRESSURE CUP(30PSI)KB-522-SSB 2 Ltr PRESSURE CUP.STS(30PSI)KB-60-K6 GASKET (PACK OF 6)KB-622-B KBII 2LTR PRESSURE CUP/HOSESKB-64 RETAINING RINGKB-66 PRESSURE RELIEF VALVEKB-74 HANDLEKB-80-K5 GASKET (PACK OF 5)KB-81-K5 SLIP RING (PACK OF 5)KB-85-K5 GASKET (PACK OF 5)KB-97-K2 LOCKNUT SS (KB) (PACK OF 2)KGP-401 LID -1/2PINT WITH DRIP CHECKKGP-509-1 GRAVITY CUP.1/2 PINT.W/BORNEKGP-5-K5 STRAINERS (PACK OF 5)KK-4502-EX-H SERVICE KIT-JGA/JGV/GFG/GFVKK-4502-FF-H SERVICE KIT-JGA/JGV/GFG/GFVKK-4502-FW-H SERVICE KIT-JGA/JGV/GFG/GFVKK-4504-EXH-30 CAP.TIP.NEEDLE - JGA/V.GFG/VKK-4504-FFH-186 CAP.TIP.NEEDLE - JGA/V.GFG/VKK-4504-FWH-186CAP.TIP.NEEDLE - JGA/V.GFG/VKK-4558 GASKETS & SEALS. JGA/V/GFG/VKK-4584 GUN CLEANING KITKK-4585 GUN MAINTENANCE KITKK-4630 DIAPHRAGM & STUD KITKK-4631 FLUID VALVE REPAIR KIT (STD)KK-4633 REVERSE SWITCH KITKK-4634 PNEUMATIC DISTRIBUTOR KITKK-4887-2 KB II REGULATOR REPAIR KITKK-4997 FLUID TUBE KIT (KBII)KK-5051 KB CUP LINER (PACK OF 20)KR-110-K3 SPOT POTS - KIT OF THREEKR-115-K5 DIAPHRAGMS - KIT OF FIVEKR-11-K3 CUP GASKETS - KIT OF 3KR-4001-B CUP LID ASSEMBLY.SUCTION.KR-459-K5 DEVILBISS MINI-CUP.KIT OF 5KR-466-K CUP ONLY. 1L. SUCTION FEEDKR-483-K10 PAINT STRAINERS - 130 MESHKR-484-K10 PAINT STRAINERS - 51 MESHKR-566-1-B CUP. 1L. SUCTION. DRIP FREEKR-69-K3 CUP GASKETS.LEATHER.KIT OF 3KRW-4001-B CUP LID ASSY.1L.CORR.RES.KRW-401-K CUP ONLY. 1L. SUCTION. BLUEKRW-502-B CUP. 1L. SUCTION. BLUEMB-4039-80 AIR CAP/RETAINING RINGMBD-11-K5 NUT (PACK OF 5) (KB-II)MC-1-K1000 PAINT MIXING CUPS (1000 BOX)


MC-1-K50 PAINT MIX CUPS (PACK OF 50)MC-2-K1000 PAINT MIX CUP LIDS(1000 BOX)MC-2-K50 PAINT CUP LIDS (PACK OF 50)MPV-10 QD STEM (1/4 MALE THREAD)MPV-17-K10 COTTON RIMLET.HALF MASK X10MPV-1-K10 SPARE VIZOR COVER (PACK OF 10)MPV-1-K50 SPARE VISOR COVER (PACK OF 50)MPV-20 QUICK DETACHABLE MALE STEMMPV-22 CARBON CARTRIDGEMPV-24-K5 NECK COVER-GREY (PACK OF 5)MPV-2-K5 DISPOSABLE HOODS (PACK OF 5)MPV-3 DISPOSABLE CARBON CARTRIDGEMPV-340 DETECTOR TUBES (2 SETS)MPV-35-K10 DETECTORS - CARBON MONOXIDEMPV-36-K10 DETECTORS - CARBON DIOXIDEMPV-37-K10 DETECTORS - OIL MISTMPV-38-K10 DETECTORS - WATER VAPOURMPV-40 DETECTOR TUBE HOLDER - BLACKMPV-4006 SAFETY GOGGLESMPV-403 VIZOR/FOAM SEALMPV-417 COALESCING ELEMENT (MPV-503)MPV-42 AIR FLOW INDICATORMPV-424 QD CONNECTOR(1/4 MALE THREAD)MPV-43-K5 BREATHESAFE RECORD CARD (X5)MPV-442 QD FEMALE VALVEMPV-44-K10 INTEGRAL VISOR COVER (X10)MPV-44-K50 INTEGRAL VISOR COVER (X50)MPV-453 RED BROWGUARD/HEADBANDMPV-454 VIZOR + FOAM SEALMPV-455 WAISTBELT REG. HOUSINGMPV-456 RUBBER HOSE 4’ 5/16”ID. QDMPV-457 AIR TUBE WITH DIFFUSERMPV-458 BAG FOR VISOR - TYVEKMPV-462 QD CONNECTOR(1/4BSP FEM THRD)MPV-463 QD CONNECTION KITMPV-476-K5 FOAM FACE CARTRIDGE (X5)MPV-477-K5 TYVEK FACE CARTRIDGE (X5)MPV-478-K5 INTEGRAL CLEAR VISOR ONLYMPV-486 FACEPIECE (BLUE HALF MASK)MPV-487 HEADSTRAP/MOULDED CAGE ASSYMPV-488 BREATHING HOSE+MALE Q/DMPV-489-K2 EXHALATION VALVE(PACK OF 2)MPV-5 QD STEM (1/4 FEM THREAD)MPV-506-2 HALF MASK & AIR SUPPLY TUBEMPV-517 VIZOR COMPLETEMPV-518 WAISTBELT WITH Q.D. CONNS.MPV-519 WAISTBELT & FILTER HOUSINGMPV-525 BREATHESAFE AIR TEST KITMPV-526 INTEGRAL VISOR ASSEMBLYMPV-59-K10 GOGGLE COVERS (PACK OF 10)MPV-60-K3 SWIVEL QD STEM (PACK OF 3)MPV-616 VIZOR/BELT KITMPV-623 INTEGRAL VISOR/BELT KITMPV-627 HALF MASK KITMPV-628 ECONOMY VISOR/BELT KITPA-HC-4482 QD STEM/NIPPLE ASSY 3/8”BSPFPA-HC-4527 HOSE CONNECTION - 1/4”BSPFPA-HC-4528 HOSE CONNECTION - 1/4”BSPFPA-HC-4543 HOSE CONNECTION - 3/8”BSPFPA-HC-4548 HOSE CONNECTION - 3/8”BSPFPRI-2-16-K FLUID TIP (1.6mm) PRIMERPRI-2-18-K FLUID TIP (1.8mm) PRIMERPRI-2-20-K FLUID TIP (2.0mm) PRIMERPRI-2-22-K FLUID TIP (2.2mm) PRIMERPRI-2-25-K FLUID TIP (2.5mm) PRIMERPRI-3-K FLUID NEEDLE - PRIMERPRI-407-310 AIR CAP/RING-COMPLIANT T/TECHPRI-416-16 SERVICE KIT - PRIMERPRI-416-18 SERVICE KIT - PRIMERPRI-416-20 SERVICE KIT - PRIMERPRI-416-22 SERVICE KIT - PRIMERPRI-416-25 SERVICE KIT - PRIMERPRIPRO-100-P1-K TRANSTECH AIRCAP - PRIMERPRIPRO-210-14-K FLUID NOZZLE No. 14PRIPRO-210-16-K FLUID NOZZLE No. 16PRIPRO-210-18-K FLUID NOZZLE No. 18PRIPRO-210-20-K FLUID NOZZLE No. 20PRIPRO-210-25-K FLUID NOZZLE No. 25

PRIPRO-310-K FLUID NEEDLEPRIPRO-P1P-14 GRAVITY GUN & CUP - PRIMERPRIPRO-P1P-16 GRAVITY GUN & CUP - PRIMERPRIPRO-P1P-18 GRAVITY GUN & CUP - PRIMERPRIPRO-P1P-20 GRAVITY GUN & CUP - PRIMERPRIPRO-P1P-25 GRAVITY GUN & CUP - PRIMERPRO-100-H1-K HVLP AIR CAPPRO-100-T1-K TRANSTECH AIR CAPPRO-100-T2-K TRANSTECH AIR CAPPRO-100-T3-K TRANSTECH AIR CAPPRO-12-K FLUID INLET CONNECTOR KITPRO-200-12-K FLUID NOZZLE (GRAVITY)PRO-200-13-K FLUID NOZZLE (GRAVITY)PRO-200-14-K FLUID NOZZLE (GRAVITY)PRO-200-16-K FLUID NOZZLE (GTISPRO)PRO-200-18-K FLUID NOZZLE (GTIPPRO,GTISPRO)PRO-200-20-K FLUID NOZZLE (GTISPRO)PRO-205-085-K FLUID NOZZLE (GTIPPRO)PRO-205-10-K FLUID NOZZLE (GTIPPRO)PRO-205-12-K FLUID NOZZLE (GTIPPRO)PRO-205-14-K FLUID NOZZLE (GTIPPRO)PRO-300-K FLUID NEEDLE (GTIPRO GRAVITY)PRO-305-085-10-K FLUID NEEDLE 085/10 (PRESSURE)PRO-305-12-14-K FLUID NEEDLE 12/14 (PRESSURE)PRO-315-K FLUID NEEDLE(GTIPRO P/S, 16->)PRO-3-K FLUID ADJ. KNOB, SPRING & PADPRO-402-K SPREADER VALVE ASSY (PRO GRAV)PRO-404-K SPREADER VALVE ASSY (PRO S/P)PRO-405-K RETAINING RING ASSEMBLYPRO-411-K CHEATER VALVE ASSEMBLYPRO-415-1 SPRAY GUN REPAIR KITPRO-450-H1-12 CAP.TIP & NEEDLE KITPRO-450-H1-13 CAP.TIP & NEEDLE KITPRO-450-H1-14 CAP.TIP & NEEDLE KITPRO-450-T1-12 CAP.TIP & NEEDLE KITPRO-450-T1-13 CAP.TIP & NEEDLE KITPRO-450-T1-14 CAP.TIP & NEEDLE KITPRO-450-T2-12 CAP.TIP & NEEDLE KITPRO-450-T2-13 CAP.TIP & NEEDLE KITPRO-450-T2-14 CAP.TIP & NEEDLE KITPROC-120-C1-K CONVENTIONAL AIR CAP C1PROC-120-C2-K CONVENTIONAL AIR CAP C2PROC-120-C3-K CONVENTIONAL AIRCAP C3PROC-220-14-K FLUID NOZZLE No. 14PROC-220-16-K FLUID NOZZLE No. 16PROC-220-18-K FLUID NOZZLE No. 18PROC-230-085-K FLUID NOZZLE JGAPPRO (PRES)PROC-230-10-K FLUID NOZZLE JGAPPRO (PRES)PROC-230-12-K FLUID NOZZLE JGAPPRO (PRES)PROC-230-14-K FLUID NOZZLE JGAPPRO (PRES)PT-31 FLUID TUBEPT-32 HANDLEPT-33-1 LID GASKET (SANTOPRENE)PT-78-K10 2.8 GALL LINER (PACK OF 10)PT-78-K60 2.8 GALL LINER (PACK OF 60)QDL-4808-B Q/D FLUID CONNECTION (BSP)SER-3414-MF DVFR/DMG BALL VALVESGK-0012-14 FLUID TIP 1.4MM GRAVITYSGK-0012-20 FLUID TIP 2.0MM GRAVITYSGK-0014-18 FLUID TIP 1.8MM GRAV/SUCTIONSGK-0023 AIR CAP RETAINING RINGSGK-0037 NEEDLE PACKINGSGK-0043-K10 FLUID TIP SEAL (PACK OF 10)SGK-0414 FLUID NEEDLE 1.4MM GRAVITYSGK-0418 FLUID NEEDLE 1.8MM GRAVITYSGK-0420 FLUID NEEDLE 2.0MM GRAVITYSGK-0430-18 FLUID NEEDLE 1.8MM SUCTIONSN-17-1-K SPRAYHEAD, PLATE & SEAL KITSN-18-1-K2 SPRAY HEAD SEAL. KIT OF 2SN-21-K TRIGGER. STUD & SCREW KITSN-26-K4 COLOUR IDENTIFICATION RING KITSN-28-K GUN SPANNERSN-34-K5 REAR SEAL KIT OF 5SN-402-K AIR VALVE ASSEMBLY KITSN-404-K NEEDLE PACKING KITSN-405-K5 TRIGGER STUD & SCREW(KIT OF 5)SN-40-K AIR INLET FITTINGSN-41-K BAFFLE PLATE


SN-42-K TRIGGER STUD AND SCREW KITSN-6-K BODY BUSHING & SEAL KITSP-100-510-K AIR CAP/RET.RING.TRANSTECHSP-100-523-K AIR CAP/RET.RING.TRANSTECHSP-200S-085-K FLUID TIP (COMPACT)SP-200S-10-K FLUID TIP (COMPACT)SP-200S-14-K FLUID TIP (COMPACT)SP-200S-16-K FLUID TIP (COMPACT)SP-200S-18-K FLUID TIP (COMPACT)SP-200S-20-K FLUID TIP (COMPACT)SP-200S-22-K FLUID TIP (COMPACT)SP-300S-085-K FLUID NEEDLE (COMPACT)SP-300S-10-K FLUID NEEDLE (COMPACT)SP-300S-14-K FLUID NEEDLE (COMPACT)SP-300S-16-K FLUID NEEDLE (COMPACT)SP-300S-18-K FLUID NEEDLE (COMPACT)SP-300S-20-K FLUID NEEDLE (COMPACT)SP-300S-22-K FLUID NEEDLE (COMPACT)SP-401-K SPREADER VALVE (COM Pr & Suct)SP-402-K AIR FLOW VALVE ASSY (COM GUN)SP-610-K FLUID INLET & SEAL (COMPACT)SP-611-K AIR INLET (COMPACT)SP-612-K AIR VALVE HOUSING & SEAL (COM)SP-614-K NEEDLE ADJ.SCREW (COMPACT)SP-617-K TRIGGER (COMPACT)SP-622-K5 NEEDLE SPRING-5 PACK (COMPACT)SP-623-K5 SEPARATOR-5 PACK (COMPACT S/P)SPK-101-K AIR VALVE SERV.KIT (COMPACT)SPK-102-K RETAINING RING ASSY (COMPACT)SPK-401-085 SERVICE KIT (COMPACT)SPK-401-10 SERVICE KIT (COMPACT)SPK-401-14 SERVICE KIT (COMPACT)SPK-401-16 SERVICE KIT (COMPACT)SPK-401-18 SERVICE KIT (COMPACT)SPK-401-20 SERVICE KIT (COMPACT)SPK-401-22 SERVICE KIT (COMPACT)SPN-5 SPANNER - GENERAL GUNSSPN-50-K2 SPANNER - KIT OF 2SPN-8-K2 TORX KEY - KIT OF 2SRI-100 CARRY TRAYSRI-16-K5 SEAL (PACK OF 5)SRI-17-K BODY BUSHING & SEAL KITSRI-18-K2 NEEDLE SPRING (PACK OF 2)SRI-19-K2 NEEDLE ADJ.KNOB (PACK OF 2)SRI-2-07-K FLUID TIP & SEALSRI-2-08-K FLUID TIP & SEALSRI-20-K AIR INLET ADAPTORSRI-21 BLANKING PLUGSRI-2-10-K FLUID TIP & SEALSRI-2-12-K FLUID TIP & SEALSRI-23-K2 AIR VALVE SPRING (PACK OF 2)SRI-35-K5 AIR CAP SEAL (PACK OF 5)SRI-37-K FLUID NEEDLESRI-3-K FLUID NEEDLESRI-401-K SPREADER VALVE ASSYSRI-402-K CHEATER(AIR FLOW) VALVE ASSYSRI-404-K AIR VALVE ASSYSRI-407-200 AIR CAP/RET.RING-ROUND SPRAYSRI-407-205 AIR CAP/RET.RING - HVLPSRI-407-210 AIR CAP/RET.RING - COMPLIANTSRI-407-215 AIR CAP/RET.RING - HVLPSRI-40-K AIR INLET ADAPTOR (SRI-W)SRI-410 CASE (INCLUDES SRI-100 TRAY)SRI-411-K3 NEEDLE PACKINGS(3) + NUT(1)SRI-412-K TRIGGER STUD & SCREW KITSRI-415-K SPREADER VALVE ASSY (SRI-W)SRI-416 SERVICE KITSRI-42-K3 SRI CUP FILTER (KIT OF 3)SRI-440-07 FLUID TIP/SEAL & NEEDLE KITSRI-440-08 FLUID TIP/SEAL & NEEDLE KITSRI-440-10 FLUID TIP/SEAL & NEEDLE KITSRI-440-12 FLUID TIP/SEAL & NEEDLE KITSRI-450-210-08 CAP.TIP/SEAL & NEEDLE KITSRI-450-210-10 CAP.TIP/SEAL & NEEDLE KITSRI-478-K12 CUP & LID (PACK OF 12 SETS)SRI-480-K3 BLACK CUP & LID (3 SETS)SRI-50-K2 SPANNER (PACK OF 2)SRI-510 GRAVITY CUP KIT

SRI-51-K12 FUNNEL (PACK OF 12)SRI-65-K2 CLEANING BRUSH (PACK OF 2)SRI-6-K5 SEPARATOR (PACK OF 5)SRI-8-K6 SPARE CUP LIDS (PACK OF 6)SRI-9-K TRIGGERSRIPRO-TS1-08 GRAVITY GUN AND CUP - TRANS-TECHSRIPRO-TS1-10 GRAVITY GUN AND CUP - TRANS-TECHSRIPRO-TS1-12 GRAVITY GUN AND CUP - TRANS-TECHSRIPRO-TS1-14 GRAVITY GUN AND CUP - TRANS-TECHSRIPRO-HS1-08 GRAVITY GUN AND CUP - HVLPSRIPRO-HS1-10 GRAVITY GUN AND CUP - HVLPSRIPRO-HS1-12 GRAVITY GUN AND CUP - HVLPSRIPRO-HS1-14 GRAVITY GUN AND CUP - HVLPSRIPRO-100-HS1-K AIR CAP/RET.RING - HVLPSRIPRO-100-TS1-K AIR CAP/RET.RING - TRANS-TECHSRIPRO-100-RS1-K AIR CAP/RET.RING - ROUND SPRAYSRIPRO-2-K5 SEPARATORSRIPRO-200-08-K FLUID NOZZLE No. 08SRIPRO-200-10-K FLUID NOZZLE No. 10SRIPRO-200-12-K FLUID NOZZLE No. 12SRIPRO-200-14-K FLUID NOZZLE No. 14SRIPRO-300-08-10-K FLUID NEEDLE FOR No. 08 & No. 10 FLUID

NOZZLESSRIPRO-300-12-14-K FLUID NEEDLE FOR No. 12 & No. 14 FLUID

NOZZLESSRIPRO-401-K SPREADER VALVE ASSEMBLYSS-2707 DRAIN COCKSSG-8069-K5 O-RING KIT OF 5SSP-1939 STR ELBOW. 90 ° 3/8NPTSSP-30-ZN SWIVEL ADAPTORSSP-462-ZN HEX NIPPLE 1/4” NPTSST-8434-K5 RETAINING RING KITTGC-407-1-K3 DRIP FREE VALVE (PACK OF 3)TGC-545-E-K SUCTION CUP KITTGC-9-K5 LID GASKET (PACK OF 5)TIA-4355 SAFETY VALVE (FOR KBII)TIA-5080-CE SAFETY VALVE 80PSI CE APPROVEDVS-522 FILTER - BSPF CONNECTIONVS-55 FILTER SCREEN 100 MESH NYLONVSA-3 FILTER ELEMENT 60 MICRON(GR)VSA-4 FILTER ELEMENT 112 MICRON(BL)VSA-5 FILTER ELEMENT 280 MICRON(WH)VSA-512 STS STRAINER ASSEMBLY 3/8 UNIVXA-12 COALESCER FILTER ELEMENT


What is DSEAR and ATEX?The EU Directives 94/4/EC (ATEX 95) “Equipment for use in potentially explosive atmospheres” and the “Workplace directive” 1999/92/EC (ATEX 137) are the European directives, which ensure employers work practices and manufacturers of equipment used in potentially explosive atmospheres, are safe and do not create potential explosion hazards. In other words, its all about health and safety at work for workers who handle and work with flammable and dangerous materials, to ensure they are not at risk of an explosion from the equipment and work practices.

The ATEX directives are implemented into UK law by the regulations “Dangerous Substances and Explosive Atmospheres Regulations” known as DSEAR 2002 and the “Equipment and protective systems for use in potentially explosive atmospheres” regulations 1996. DSEAR became mandatory in July 2006. DSEAR is a legal Health and Safety requirement which is enforced by the HSE, local authorities and in part the fire service.

A guide to the DSEAR and ATEX Directives

ATEX Compliance

As a manufacturer of equipment used in potentially explosive atmospheres, we comply with this directive by applying the CE mark along with the Explosion protection symbol

and other markings to show compliance

of that product.

Each piece of equipment must be marked with information to enable the user to assess its suitability to be used in the environment it is intended to be used in. The equipment could be marked with the following;

● Name and address of Manufacturer● The CE mark● If the equipment has been certified by a Notified

Body, their reference follows the CE mark● Equipment model number/name/type● Year of manufacture● The Explosion protection Symbol

● The equipment Group II and category 1, 2 or 3● For Gas (G) e.g. Group 2, Cat 2 Gas

Workplace regulations DSEAR 2002The ATEX 1999/92/EC workplace regulations are implemented in the UK through the DSEAR 2002 Regulations. The duties for employers and owners under DSEAR are;

● Carry out a risk assessment of work involving dangerous substances and eliminate or reduce any risks identified.

● Provide equipment and procedures for accidents and emergencies.

● Instruct and train employees.● Areas where hazardous explosive atmospheres may

occur are classified into zones and where necessary marked with a specified “EX” sign at their points of entry; (eg spray booths, mix rooms, paint stores etc).

● Provide equipment and protective systems which comply with ATEX Regulations appropriate for the Zone rating of the hazardous area.

● Document all the above in an Explosion Protection Document.

Avoidance of Hazards associated with Spraying flammable materialsThe main hazard with spraying is electrostatic discharges and mechanically generated sparks. To avoid these ignition hazards, you should;

● Only use equipment CE marked to ATEX regulations. Most ITW Finishing Products are CE marked to ATEX eg Sprayguns, Digital Gauge, hoses. If in doubt, contact your distributor or ITW Finishing.

● The equipment must be installed and used in accordance with the instructions provided by the manufacturer(s).● Ensure metallic parts of the equipment are earthed and bonded together (e.g. pressure feed tanks and pumps) to avoid potential

differences between them. Metallic portable containers must be bonded and earthed. Check earth continuity at regular intervals. Keep earthing points clean.

● Use conductive air and fluid hoses to avoid static charging from air and fluid flows.● Equip Operators with anti-static clothing and conductive footwear. Remove contaminated clothing if leaving the workplace into areas

where ignitions hazards may occur e.g. smoking.● Clean equipment with non-flammable liquids, or use safety cans with flame arrestors for use with flammable liquids.● Removal of paint residues with scrapers made of plastic or non-sparking materials (steel scrapers can create sparks). Coat walls with

strippable/peelable coatings to avoid removal of residues by mechanical means.

More information can be found at the HSE DSEAR website: http://www.hse.gov.uk/fireandexplosion/dsear.htm

Typical Markings found on Sprayguns

Name and Address of Manufacturer

CE Mark

Model or Type

Equipment Group

Category 2

Special Conditions for safe Use

Gas

Typical Markings found on Hazardous Area Equipment

Name and Address of Manufacturer

Specific Marking of Explosive Protection

EquipmentGroup

CategoryGasor Dust

Protection Concept

Gas Group

Temperature Class

Ambient Temperature range

CE Mark and number of Notified Body

Modelor Type

EC Type Examination Certificate Number

Example of DGi Serial Number:First 2 numbers denote year, 3rd and 4th denote month, eg March = 03, 5th and 6th denote day. remaining 5 numbers are sequential, reset at 00001 at start of New Year.


Documents

Catalogue Master 2009 - cerenservis.com · 4 Technical Catalogue 2009 HIGH PERFORMANCE, BASE AND CLEARCOAT TECHNOLOGY SPRAY GUNS Part Number Explanation GTIPRO - T1 - B - 13 Model