Catalogue - Implant Training › NdSite › OnLineCache › FMS › 42 › 7… · We are pleased to introduce our new MG In-Hex Catalogue 2015. ... in 1996, Mozo-Grau was created

the perfect fusion

Catalogue

p.

3

Dear Doctors,

We are pleased to introduce our new MG In-Hex Catalogue 2015.

Established in Valladolid (Spain) in 1996, Mozo-Grau was created to offer a service

by developing, researching, designing and launching new reliable products and

solutions for the field of implantological oral surgery, based on the experience of

respected professionals.

Quality, innovation, and science are among the fundamental bases on which Mozo

Grau sets its activities. Mozo Grau has been audited and certified to be in conformance

with local, European and international standards. Its high quality standards demand

parts to be produced with specifications accurate to within 10 microns (0.01 mm)

and 100% verification of the parts manufactured to pass through a series of rigorous

tests before shipping.

As evicence of what science means to Mozo-Grau is our Scientific Summary which

gathers over 50 scientific articles on experimental and clinical studies, and a collection

of selected clinical cases performed with Mozo Grau dental implants. The best

guarantee of Mozo-Grau quality and constant improvement is the research team´s

trust and confidence.

As for innovation, Mozo Grau is focused in increasing the added value of its production

and quality. In this regard, Mozo Grau has launched MG Código Explorer®, a unique

numeric code which identifies every single MG dental implant. This code allows

doctor and patient to have full traceability and knowledge of the implant. Patients

receive their Código Explorer® on a MG Implant Card®, a very comfortable form to

carry information everywhere (see page 11 for further information).

Valladolid, October 2014Castilla y León Young Businessman of

the Year Award. Valladolid 2003

AQVA Quality and Business Management Award. Madrid 2003

The Bizz Award for Excellence in Quality Houston -Texas (USA) 2005

Entrepeneur of the year award.Castilla y Leon 2012

Quality Award. Executive Magazine 2013

Enterpreneur of the Year Award (Category: Industry). Castilla y León 2012

Best Quality Manager Award. Castilla y León 2014

Quality

Quality: Mozo-Grau Principle

p. 4

Clients testimonials

The definition of the Spanish Royal Academy of the Language

for quality is: “property or set of inherent properties to a thing

that allow to appreciate it like equal, better or worse than the

rest of its type”.

The strict reading of this definition places the quality of a pro-

duct as a comparison to the quality offered by its competi-

tors. At Mozo-Grau this comparison is not enough. Our aim is

not only to be better than the rest, but to work to satisfy our

clients by offering the most advanced science and techniques.

Our Quality Control and Engineering Department set up

analysis systems and verification procedures to avoid mistakes

from the first stages of production. In this way we are able

to develop solid and efficient processes that guarantee 100%

reliability on all the products and services.

ISO 13485:2003 is an ISO standard, published in 2003, that re-

presents the requirements for a comprehensive management

system for the design and manufacture of medical devices.

The Medical Devices Directive (Council Directive 93/42/EEC)

is intended to harmonize the laws related to medical devices

within the European Union. ISO 9001:2008 requires the or-

ganization to demonstrate continuous improvement. The CE

marking (also known as CE mark) is a mandatory conformity

mark on many products placed on the single market in the

European Economic Area (EEA).

Mozo-Grau complies with all these mandatory certifications

and regulations necessary to supply implants in the European

Union, moreover Mozo Grau is voluntarily complying with the

most exigent standards on the subject.

At Mozo-Grau we are proud of the trust placed on us by our

clients every time they purchase one of our products. This con-

fidence compels us to meet their expectations.

“The best quality control any company can have is a satisfied client”.

“I´m really pleased to collaborate with a company which is truly interested in the correct evalua-tion of its products and that also promotes the clinical researching with the aim of solving important problems for our patients“.

Dr. Marco EspositoChief editor European Jour-nal of Oral Implantology. Italy. 23/08/2012

“In my opinion Mozo-Grau is at the very forefront among the most important companies in the Implantology sector. Its concern and support to research, its ex-haustive quality controls, its innovation capability and its closeness to the profes-sionals in the field, predicts undoubtedly a great future full of success, both from a scientific point of view and from a profes-sional and commercial”.

Dr. Eduardo EstefaníaDirector of Master in Periodontics UPV, Dental Clinic Medical Director UPV.11/09/2012

“Nowadays there are many com-panies that manufacture implants. So, what makes the difference? How to choose between one or the other?. In my opinion, there are two essential elements: accu-racy or adjustment between the different parts that must articulate to achieve a perfect restoration and the closeness between those who manufacture implants and those who use them. Both factors are fully complied by Mozo-Grau”.

Dr. Carlos LarruceaUniversity of Talca. Chile.29/08/2012

“I have been using exclusively Mo-zo-Grau implants for 12 years, both in ordinary patients as well as in oncologic under radiotherapy treat-ment. The implant quality is ex-traordinary and it is at the highest level among the companies in the sector. Besides, Mozo-Grau is also concerned about the knowledge disclosure, organizing courses with lectures of the highest international level in all the countries where it is set. For Mozo-Grau the continu-ous investigation is its first objec-tive, and so it organizes researching programmes in many Spanish and foreigners universities. On the other part, the service and assistance of the professionals is very good, fast and exquisite”.

Profesor. D. Carlos Navarro VilaProfessor of Oral Surgery and Max-illofacial of the Faculty of Medicine at the Complutense University of Madrid . Chief Professor of Oral and Maxillofacial Surgery of University General Hospital Gregorio Marañon in Madrid. President of the European Board of Oral and Maxillofacial Sur-gery.29/09/2012

“The relationship between the Master of Oral Surgery at the University of Seville and Mozo-Grau comes from nearly 5 years and has always been conducted at the highest level, both in the clinical as well as the scien-tific level. For us it is crucial that a brand can offer so optimum quality standards in all the areas of collaboration and at all the times and Mozo-Grau always complies at 100%”.

Dr. Daniel Torres LagaresDirector of Master in Oral Surgery Univer-sity of Seville, Dean of the Faculty of Den-tistry University of Seville. 20/08/2012

Quality

p. 5

CE Marking

COLOMBIA

TAIWAN

VENEZUELA

CHINARUSSIA

MEXICO

ISO 13485: 2012 ISO 9001: 2008

Introduction 3

Quality 4

The Perfect Fusion 7

Scientific Support 8

MG Vial manipulation 10

Código Explorer® 11

MG-INHEX Implants 13

3.30 MG-INHEX Implant 14




MG-Inhex Prosthetic System 19

Prostheses scheme 20

Tools for prostheses and screwdrivers 25

MINI MG-INHEX Prosthetic System 26

STANDARD MG-INHEX Prosthetic System 28

MAXI MG-INHEX Prosthetic System 38

MG-INHEX Temporary prostheses/Immediate Loading 48

Screws for abutment and transfers 51

Surgical Material 53

Instructions for maintenance of surgical instruments 54

Surgical kits 55

Drills for implants 56

Drills for implants and RCD® stop kit 58

Surgical Wrenches 59

Bone Expansion 61

Accessories 62

MG-InHex® CatalogueIndex

Abut. Abutmentcc Cubic centimeterscm centimeterC/A Contra-Angle

Diff. Sit. Difficult SituationsH HeightImpr. Impressionmm Millimeters

Ncm Newtons per centimeterPrep. Prepableret. Retainingrpm Revolutions per minute

STD StandardTap. Taperedw/s With screw

Abbreviations

MG-INHEX

Imp

lant

sMG-INHEX

Pro

sthe

ses

SURGICAL

MATERIALS

p.

7

micron accuracy

With MG-InHex Implant, Mozo-Grau has achieved a solution

based on well established scientific results and respecting

surgical, biological and prosthetic principles thus ensuring a

very aesthetic result.

The ease of manipulation and the strength of the materials of the

MG-InHex implant allows the clinician to achieve predictable

aesthetic results with the security and reliability provided by its

high rate of success, based on solid osseointegration and ideal

distribution of the biomechanical loads.

The internal connection of MG-InHex implant is based on the

use of Morse Cone, which reliably ensures the correct stability

and solidity in the abutment, without loss of flexibility when

planning the restoration.

The location of the internal connection point between the

implant and the abutment, together with the design of the

microthreads in the coronal portion, respect the biological

principles that ensure a correct reaction from the perimplant

bone. On the other hand, the 45º shoulder has been proven

as the best solution in regard to the soft tissues treatment.

All these proven principles lead to the achievement of an

optimum aesthetic result.

The trunk and cone profile design of the implant allows

its walls to provide sufficient resistance to respond to

axial and paraxial occlusion loads with guarantees. The

Microthreads in the cortical part, which become threads

in the central part, together with the self-tapping design

of the apex end, make this implant one of the most stable

at insertion in the market. Moreover, the proven efficiency

of the RBM treated surface to achieve secondary or

biological stability, makes the MG-InHex Implant the best

option for immediate loading applications.

At Mozo-Grau we are very satisfied with the versatility

that the MG-InHex Implant offers and we are sure it will

meet the most demanding expectations of all the clinical

professionals and technicians in the sector.

the perfect fusion

MG-InHex®

Implantology. Implants. MG-InHex

p. 8

INTERNAL CONNECTION11º Morse taper double internal hexagon.

PLATFORM SWITCHINGRespect for the biological principles.

MICROTHREADSReducing marginal bone remodelation.

45º IMPLANT SHOULDERAesthetic soft tissues.

RBM SURFACE TREATMENTPredictable osseointegration. (Success rate 98,2%*)

SURFACE TREATMENT UP TO THE IMPLANT COLLAREvolution of science.

LOADING RESISTANCEStrength of material.

IMPLANT MORPHOLOGYSelf taping, conical apex and V-shape threads.

IMMEDIATE LOADINGSuitable for the treatment.

* According to the multicentric prospective study published in Official Journal of the Spanish Oral and Maxillofacial Surgery Association (published Sept-Oct 2009).1,475 implants placed, 654 prostheses over 480 patients, 2.5 years follow up.


List of Studies

MG-InHex®

p. 9

A solid base: over 50 scientific studies and articles

For more information about the scientific principles that support the MG-InHex implant design, please refer to, among others, the following scientific articles:

Microleakage of the prosthetic abutment/implant interface with internal and external connection: in vitro study

Carlos Larrucea Verdugo et al. University of Talca, Chile.

Publication: Clinical Oral Implant Research. Article first published online 4 July 2013

Conclusion: “.....the lower levels of microleakage occur in 30N tightened abutments, where, as shown in the photomicrographs, the gap is virtually nonexistent for Morse taper connections and external connections get an almost perfect seal. This may be due to the strict manufacturing criteria found in the analysed elements.”

Influence of implant neck design and implant-abut-ment connection type on peri-implant health. Ra-diological study

Miguel Peñarrocha Diago et al. University of Valencia, Spain.

Publication: Clinical Oral Implant Research. Vol. 24, Issue 11, pages 1192-1200, November 2013

Conclusion: “.....Global mean marginal bone loss with Osseous® was 0.27 ± 0.43 mm and 0.38 ± 0.51 mm as determined 6 and 12 months after prosthetic loading, respectively, whereas in the case of Inhex® was 0.07 ± 0.13 and 0.12 ± 0.17 mm..... Anyway, in both groups, the value obtained were within normal ranges described in the literature”

MG-InHex internal connection photomicrograph. Courtesy of Dr. Carlos Larrucea

Measurement of peri-implant marginal bone loss. Courtesy of Dr. Miguel Peñarrocha

Implantology. MG Vial manipulation

p. 10

MG Vial manipulation

PLACEMENT OF THE IMPLANT WITH THE CONTRA ANGLE

MANUAL PLACEMENT OF THE IMPLANT

Open the blister

Open the blister

Remove the vial

Remove the vial

Vial

Vial

Unscrew the plastic cap

Unscrew the plastic cap

Pick up the implant with the C/A

Place the cover screwPlace the implant in the alveolus Open the cap flip-top Extract the cover screw

Load the implant Place the implant in the alveolus*See the Hex. hand wrench on page 51

Remove the hand wrench Open the cap flip top Extract the cover screw Place the cover screw

Implantology. Código Explorer

p. 11

Your Implant, your CodeEvery Mozo Grau dental implant is identified with a Código Explorer®, a unique numeric code that will allow you to have full traceability and knowledge of your implant.

Código Explorer® ensures 100% traceability of every Mozo Grau implant leading to doctor’s and patient’s peace of mind. Enter your Código Explorer® in Mozo Grau website (www.mozo-grau.com) to download a Certificate of Quality showing full information about your implant.

Patients receive their Código Explorer® on a Mozo Grau Implant Card®, a very comfortable form to carry information everywhere.

I M P L A N T C A R D

Traceability as never seen before

MG-InHex®

Implants

Implants


DESCRIPTION

3.3 x 10 mm MINI MG-INHEX Implant

3.3 x 11.5 mm MINI MG-INHEX Implant



MG-INHEX MINI Cover screw*Do not tighten at torque values higher than 10 Ncm

DRILLING SEQUENCE

MG-INHEX

REF.

23203310

23203311

23203313

23203315

23203325

3.3 mm MINI MG-INHEX

- Double Internal Hexagon- R.B.M. Treated Surface- Implant Platform: 2.30 mm- Implant Diameter: 3.3 mm- Ø Internal thread: 1.4 mm- Internal Morse Cone 11º- Microthreads- Material: Grade V Titanium- Cover screw included in each implant- Implant mount included- “No touch” sterile package

A standard drilling sequence will be needed and the 3.0 mm drill will be the final one to be used

(recommended drilling speed: 800-1000 rpm). It is suggested to use the profile drill at 800 rpm. Being

the implant self-tapping, on very cortical bones (symphysis area) it is recommended to use the drills for

hard bones, and, if considered necessary, use the 3.3 mm bone tap to avoid overheating the bone and to

facilitate the implant insertion.

The use of copious internal irrigation is suggested, too.

It is recommended to place the implants at torque values between 35-45 Ncm.

Implant mount shows millimetermarks and hexagon position

Bone

Tap

(for v

ery

corti

cal

bone

s)

Loca

tor d

rill

800-1000 rpm 800-1000 rpm800 rpm 15 rpm

2.0

mm

3.0

mm

Profi

le D

rill

3.2

mm

har

d bo

ne d

rill

p. 14

p. 15

Implants


MG-INHEX

REF.

23203708

23203710

23203711

23203713

23203715

23205001

DESCRIPTION

3.75 x 8 mm STD MG-INHEX Implant


3.75 x 11.5 mm STD MG-INHEX Implant



MG-INHEX STD Cover screw*Do not tighten at torque values higher than 10 Ncm

3.75 mm STANDARD MG-INHEX

- Double Internal Hexagon- R.B.M. Treated Surface- Implant Platform: 2.80 mm- Implant Diameter: 3.75 mm- Ø Internal thread: 1.6 mm- Internal Morse Cone 11º- Microthreads- Material: Grade IV Commercially Pure

Titanium- Cover screw included in each implant- Implant mount included- “No touch” sterile package




hard bones, and, if considered necessary, use the 3.75 mm bone tap to avoid overheating the bone and

to facilitate the implant insertion.



DRILLING SEQUENCE


Bone

Tap

(for v

ery

corti

cal

bone

s)

Loca

tor d

rill

2.0

mm

3.0

mm

3.3

mm

Profi

le D

rill

3.5

mm

har

d bo

ne d

rill

MG-INHEX

800-1000 rpm 800-1000 rpm800 rpm 15 rpm

p. 16

Implants


MG-INHEX4.25 mm STANDARD MG-INHEX

REF.

23204208

23204210

23204211

23204213

23204215

23205001

DESCRIPTION



4.25 x 11.5 mm STD MG-INHEX Implant



MG-INHEX STD Cover screw*Do not tighten at torque values higher than 10 Ncm

- Double internal hexagon- R.B.M. treated surface- Implant Platform: 2.80 mm- Implant Diameter: 4.25 mm- Ø Internal Thread: 1.6 mm- Internal Morse Cone 11º- Microthreads- Material: Grade IV Commercially Pure

Titanium- Cover screw included in each implant- Implant mount included- “No touch” sterile package

Recommendations for use:- Soft Bones (Type IV), Posterior Sectors




hard bones, and, if considered necessary, use the 4.25 mm bone tap to avoid overheating the bone and

to facilitate the implant insertion.



DRILLING SEQUENCE


Bone

Tap

(for v

ery

corti

cal

bone

s)

Loca

tor d

rill

2.0

mm

3.0

mm

3.3

mm

3.8

mm

Profi

le D

rill

4.0

mm

har

d bo

ne d

rill

800-1000 rpm 800-1000 rpm800 rpm 15 rpm

p. 17

MG-INHEX

REF.

23205009

23205010

23205011

23205013

23205015

23205000

DESCRIPTION

5.0 x 9 mm MAXI MG-INHEX Implant


5.0 x 11.5 mm MAXI MG-INHEX Implant



MG-INHEX MAXI Cover screw*Do not tighten at torque values higher than 10 Ncm

- Double Internal Hexagon- R.B.M. Treated Surface- Implant Platform: 3.80 mm- Implant Diameter: 5.0 mm- Ø Internal Thread: 2.0 mm- Internal Morse Cone 11º- Microthreads- Material: Grade IV Commercially Pure

Titanium- Cover screw included on each implant- Implant mount included- “No touch” sterile package

Recommendations for use:- Soft Bones (Type IV), Posterior Sectors,

immediate post-extraction sites

5.0 mm MAXI MG-INHEX


(recommended drilling speed: 800-1000 rpm). Drills wider than 4.3 mm are recommended to be used

at 400 rpm. It is suggested to use the profile drill at 800 rpm. Being the implant self-tapping, on very

cortical bones (symphysis area) it is recommended to use the drills for hard bones, and, if considered

necessary, use the 5.0 mm bone tap to avoid overheating the bone and to facilitate the implant insertion.



DRILLING SEQUENCE


Bone

Tap

(for v

ery

corti

cal

bone

s)

Loca

tor d

rill

2.0

mm

3.0

mm

3.3

mm

3.8

mm

4.3

mm

4.7

mm

Profi

le D

rill

4.9

mm

har

d bo

ne d

rill

Implants


MG-INHEX

800-1000 rpm 400 rpm400 rpm 800 rpm 15 rpm

Discover this and other products in: www.mozo-grau.com

New MTA®

This new MTA line offers the easiest and most effective solution

The implant (MG InHex® o MG Osseous®) together with the MTA abutment with implant mount function allows the maximum use of all its prosthetic components with the high quality has always characterized Mozo-Grau

This new Line presents, together with a Mozo-Grau implant, a final MTA® abutment, an impression coping, a cover screw and a prosthetic screw, which makes it into the optimal solution to achieve the maximum efficiency of all its components.

MTA® FinalAbutment

MG InHex® Implant

MTA® ImpresionCoping

+

MG InHex® Implant

MTA® Final

+Cover Screw & Prosthetic Screw

+Cover Screw

+++C

M

Y

CM

MY

CY

CMY

K

MTA ENG2.pdf 1 01/10/15 09:49

Discover this and other products in: www.mozo-grau.com

New MTA®

This new MTA line offers the easiest and most effective solution

The implant (MG InHex® o MG Osseous®) together with the MTA abutment with implant mount function allows the maximum use of all its prosthetic components with the high quality has always characterized Mozo-Grau

This new Line presents, together with a Mozo-Grau implant, a final MTA® abutment, an impression coping, a cover screw and a prosthetic screw, which makes it into the optimal solution to achieve the maximum efficiency of all its components.

MTA® FinalAbutment

MG InHex® Implant

MTA® ImpresionCoping

+

MG InHex® Implant

MTA® Final

+Cover Screw & Prosthetic Screw

+Cover Screw

+++C

M

Y

CM

MY

CY

CMY

K

MTA ENG2.pdf 1 01/10/15 09:49

MG-InHex®

Prosthetic SystemProstheses schemeScrewdrivers and tipsHealing abutmentsImpression copingsDirect to implant abutmentsAbutment for ZirconiumBall and Locator® abutmentsTransmucosal (Tapered)Temporary Prostheses / Immediate LoadingScrews for Abutments and Transfers

p. 20

Healing abutment

AestheticHealing abutment

MINI Platform

STANDARD Platform

MAXI Platform

MG-INHEX Implants

Retaining Cap for Tapered Abutment

(10º-30º). 2 pcs.

Taperedabutment cap

Angled 17º

All the anti-rotational castable abutments are manufactured in red colour for an easy identification.*

UnitaryRestoration

Multiplerestoration (fixed) Direct to

implant

Transmucosal

Straight

Angled

Cemented

Cemented

Screw

Screw

Hex prepable abutment

Hex gold baseUCLA abutment

Hex / Non-Hexgold base

UCLA abutment

17º angledtapered abutment

10º Tapered abutment


Hex / Non-Hexgold base

UCLA abutment

Ball abutment Inhex

Locator® abutment(includes processing

pack)

Direct to implant

Ball abutment

Locator®

Bars

Overdenture(removable)

Non-Hexgold base

UCLA abutment

ABUTMENT FOR ZIRCONIUM

Straight

Angled 17º angledtapered abutment



Transmucosal

Direct to implant

Unitary

ImmediateTemporary Restoration

Multiple

Tapered abutment(10º - 30º)

Straight

Angled

Temporaryhex castable

UCLA abutment

Temporarynon hex castableUCLA abutment

Transmucosal

17º angledtapered abutment

Tapered Abutment Cap (10º-30º)

p. 21

Angled abutment(15º - 20º)

Hex / Non-Hexprepable abutment

Hex / Non-Hexprepable abutment

(weld with titanium)

Aesthetic hex prepable abutment


Aesthetic hexprepable abutment

Hex titaniumUCLA abutment


Abutment for Zirconium

Aesthetic hex prepable abutment

Angled abutment(15º - 20º)

Abutment for Zirconium

Castable post for 17º angled tapered

abutment

Titanium post for 17º angled tapered

abutment

Rotational castable post for tapered

abutment(10º - 30º)

Rotational titanium post for tapered


10º Anti-rotational castable post for

tapered abutment

10º Anti-rotational titanium post for tapered abutment

Plastic cap

10º Anti-rotational castable post for

tapered abutment

10º Anti-rotational titanium post for tapered abutment


abutment


abutment

Rotational castable post for tapered


Rotational titanium post for tapered


Temporary prepable hex abutment

Temporary prepable non-hex abutment

Temporary castable post for tapered


Temporary titanium post for tapered


Temporarytitanium hex

UCLA abutment

Temporarytitanium non-hexUCLA abutment


abutment


abutment

Bio-CAMMG

MG Bio-CAM®

Customized prosthesis

Mozo-Grau offers more:

QualityReliabilityPerfect adjustmentPeace of mindAccuracy

Now more connections available:Branemark type®; Straumann®; Nobel Replace®; Zimmer®; Astra Tech®...

Simply perfect

New!

p. 25

Prostheses. Prosthetic System MG-InHex

Prosthetic System MG-InHex®

100% of all the stages necessary for the production of the prosthesis for our implant system are subject to strict quality controls.

High precision machinery, with ±0.005 mm margin error and ±0.01 mm tolerance, is used to produce the prosthetic abutments.

Unless expressly specified in any section, the material used for producing the abutments is Grade V Titanium (TiAI6V

4)

REF.

13801500

14608020

14608030

14650185

DESCRIPTION

Dynamometrical manual wrench.Variable Tightening torque from 10 to 35 Ncm

20 Ncm torque wrench

30 Ncm torque wrench

Dynamometric ratchet wrench 45 Ncm.

TORQUE WRENCHES

- To assure the precise tightening of all the prosthetic screws

- For a bigger comfort when working in the posterior zone

Recommendations for use:- Tightening Torque:

· 30 Ncm for MG-InHex prostheses· 30 Ncm for MG-Osseous prostheses

SCREWDRIVERS AND TIPS

1.25 mm Hex Screwdriver- Used for: Cover screw, implant mount,

healing abutment, impression coping, tapered abutment, ball abutment, prosthetic screw, twist drills with stop

Screwdriver tip- 1.25 mm Hex Screwdriver- Used for: Cover screw, implant mount,

healing abutment, impression coping, tapered abutment, ball abutment, prosthetic screw, twist drills with stop

- Used with: ratchet wrench, torque wrench, hand wrench

REF.

15201125

15202125

15203125

15251125

15252125

15253125

14601125

14602125

14603125

13801525

13802525

13803125

19008393

DESCRIPTION

1.25 mm short Hex. Screwdriver. Length 8 mm

1.25 mm long Hex. Screwdriver Length 14 mm

14 mm flat screwdriver

1.25 mm short Hex. Dynamometric ratchet wrench. Length 8 mm. NEW

1.25 mm long Hex. Dynamometric ratchet wrench. Length 14 mm. NEW

14 mm flat screwdriver. Dynamometric ratchet wrench. NEW

1.25 mm short Hex. Screwdriver tip. Length 7 mm

1.25 mm long Hex. Screwdriver tip. Length 12 mm

12 mm flat screwdriver tip

1.25 mm short C/A Hex. Screwdriver. Length 9 mm

1.25 mm long C/A Hex. Screwdriver. Length 14 mm

14 mm C/A flat screwdriver

Locator® Core Tool

p. 26

Mini MG-InHex® Prosthetic System


MINI MG-INHEX

- Platform: 2.30 mm- Ø: 3.3 mm- Stainless Steel

Recommendations for use:- One single use

REF.

23205541

DESCRIPTION

Implant Analogue MG-INHEX MINI

MINI MG-INHEX IMPLANT ANALOG

MINI MG-INHEX

MINI MG-INHEX

REF.

23203320

23203330

23203340

DESCRIPTION

Healing abutment MG-INHEX MINI



CUFF HEIGHT (H)

2 mm

3 mm

4 mm

MINI MG-INHEX HEALING ABUTMENTS

MINI MG-INHEX IMPRESSION COPINGS

REF.

23203303

23235504

DESCRIPTION

Hex Impr. Coping w/s for MG-INHEX MINI

Short transfer screw MG-INHEX MINI

[ Hex

]

- Platform: 2.30 mm- Ø: 3.3 mm- Screwdriver: Hex 1.25 mm

Recommendations for use:- It is convenient to leave the cuff 2 mm

above the soft tissue- Maximum tightening torque 10 Ncm.

- Stainless Steel- Screwdriver: Hex 1.25 mm- Platform: 2.30 mm- Impression coping: L=13 mm , A=11 mm- Short transfer screw: L= 17 mm, A=9 mm- Ø: 3.3 mm

[ Hex ]- For single or multiple restorations- Used for open or closed tray

Recommendations for use:- For hex closed tray use short transfer screw- Maximum tightening torque 10 Ncm.

[ No Hex ]- For multiple restorations- Used for closed tray

Ø

H

Ø

AL

p. 27

DESCRIPTION

Hex Prep. Abutment w/s for MG-INHEX MINI



CUFF HEIGHT (H)

1 mm

2 mm

3 mm


Mini MG-InHex® Prosthetic System

MINI MG-INHEX

MINI MG-INHEX

REF.

23207031

23207032

23207033

MINI MG-INHEX HEX PREPABLE ABUTMENT

[ Hex

]

- Titanium Grade V abutment that can be cut- Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Platform: 2.30 mm- Ø: 3.70 mm- Screwdriver: 1.25 mm Hex

Recommendations for use:- Soft tissue height must be above the

abutment ring height- Torque 30 Ncm.

* Abutments are also available without screw.

MINI MG-INHEX

REF.

23231015

23231020

DESCRIPTION

15º Angled prep. abut. w/s for MG-INHEX MINI

20º Angled prep. abut. w/s for MG-INHEX MINI

MINI MG-INHEX ANGLED PREPABLE ABUTMENT

CUFF HEIGHT (H)

2 mm

2 mm

[Hex

]

- Titanium Grade V abutment that can be cut - Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Used to correct disparallelism- Platform: 2.30 mm- Ø: 3.7 mm- Screwdriver: 1.25 mm Hex.


abutment ring height- Torque 30 Ncm

Ø

6,5 mm.

H

Ø

6,5 mm.

H

p. 28

Standard MG-InHex® Prosthetic System


STANDARD MG-INHEX

REF.

23204820

23204830

23204840

23204850

23204860

23204870

DESCRIPTION

Healing abutment MG-INHEX STD






CUFF HEIGHT (H)

2 mm

3 mm

4 mm

5 mm

6 mm

7 mm

STANDARD MG-INHEX HEALING ABUTMENTS




STANDARD MG-INHEX

REF.

23206030

23206040

23206050

23206060

23206070

DESCRIPTION

Aesthetic healing abutment for MG-INHEX STD





STANDARD MG-INHEX AESTHETIC HEALING ABUTMENTS

CUFF HEIGHT (H)

3 mm

4 mm

5 mm

6 mm

7 mm

- Platform: 2.80 mm- Ø: 6.0 mm- Screwdriver: Hex1.25 mm

Recommendation for use:- It is convenient to leave the cuff 2 mm


Ø

H

STANDARD MG-INHEX

REF.

23206036

23206046

23206056

23206066

23206076

DESCRIPTION

Healing abutment Ø5mm MG-INHEX STD





STANDARD MG-INHEX HEALING ABUTMENTS Ø5mm NEW

CUFF HEIGHT (H)

3 mm.

4 mm.

5 mm.

6 mm.

7 mm.




Ø

H

Ø

H

p. 29



STANDARD MG-INHEXSTANDARD MG-INHEX STANDARD MG-INHEX IMPRESSION COPINGS

REF.

23205503

23205506

23205403

23205600

23205603

23205606

DESCRIPTION

Hex Impr. Coping w/s for MG-INHEX STD

Aesthetic Hex Impr. Coping w/s for MG-INHEX STD

Long Hex Imp Coping w/s for MG-INHEX STD

Non-Hex Impr. Coping. for MG-INHEX STD

Aesthetic Non-Hex Impr. Coping for MG-INHEX STD

Long Non-Hex Impr. Coping for MG-INHEX STD

[ Hex

][ N

on H

ex ]

- Stainless Steel- Screwdriver: Hex 1.25 mm- Platform: 2.80 mm

[ Hex ]- For single or multiple restorations- Used for open or closed tray- Supplied with screw Ref. 23205502 (see page 43)- For hex closed tray use short transfer screw (Page

45, order separately)- Hex impression coping:

Ø: 4.1 mm L= 13.5 mm A=11 mm- Aesthetic Hex impression coping:

Ø: 6.0 mm L= 13.5 mm A=11 mm- Long Hex impression coping:

Ø: 4.1 mm L= 17 mm A=15 mm

[ Non Hex ]- For multiple restorations- For closed tray only- Non-hex impression coping:

Ø: 4.1 mm L=16.30 mm A=11 mm- Aesthetic non-hex impression coping:

Ø: 6.0 mm L=16.30 mm A=11 mm- Long non-hex impression coping:

Ø: 4.1 mm L=19.30 mm A=14 mmRecommendations for use:- Maximum tightening torque 10 Ncm.

STANDARD MG-INHEX

- Platform: 2.80 mm- Ø: 4.0 mm- Stainless Steel


Analog wrenchTo hold the abutment or crown for a comfortable handling at lab or clinic

REF.

23205501

23285501

DESCRIPTION

Implant Analogue MG-INHEX STD

Analog wrench MG-INHEX STD

STANDARD MG-INHEX IMPLANT ANALOG

Ø

Ø

L

L

A

A



REF.

23207990

13207993

DESCRIPTION

Abutment for Zirconium w/s MG-INHEX STDIncludes one Sirona®’s CEREC 3D scanbody

Scanbodies (3 pcs each pack)* Compatible with Sirona®’s CEREC 3D


0,55

TITANIUM BASE FOR CAD/CAM. For production of customized mesostructures by CAD/CAM techniques

Mozo-Grau abutment for Zirconium allows the professional to carry out customized restorations using Zirconium over Mozo-Grau implants with the highest possible accuracy.

The abutment for Zirconium can be used as base to cement zirconium structures or mesostructures for unitary or multiple restoration cases, achieving the best possible passive adjustment that allows a safe, predictable and aesthetic result.

Mozo-Grau abutment for Zirconium can be scanned by some of the best scanners currently in the market allowing the use of modern software for infographic design.

STANDARD MG-INHEX

Ø

A= 10 mm

REF.

TITANIUM

23205245

23205345

GOLD

23209800

23209801

DESCRIPTION

Non-Hex Titanium UCLA w/s for MG-INHEX STD

Hex Titanium UCLA w/s for MG-INHEX STD

Hex GOLD BASE UCLA w/s for MG-INHEX STD(Gold 60/19)

Non-Hex GOLD BASE UCLA w/s for MG-INHEX STD(Gold 60/19)

STANDARD MG-INHEX UCLA ABUTMENT

- Hex Castable UCLA with Gold Base abutment- Attaches directly to implant- For cement retained or screw retained

restorations- Platform: 2.80 mm- Ø: 4.1 mm - Screwdriver: 1.25 mm Hex.- Cast using Gold alloys 60/19- Melting temperature 1415ºC

Recommendations for use:- Ensures a correct fit of the abutment to the

implant- Maximum tightening torque 20 Ncm.

- Titanium Grade V abutment- Attaches directly to implant- For cement retained or screw retained

restorations- Platform: 2.80 mm- Ø: 4.1 mm - Screwdriver: 1.25 mm Hex.

Recommendations for use:- Hex abutment is recommended for unitary

restorations- Maximum tightening torque 20 Ncm.- Ensures a correct fit of the abutment to the

implant

Ø

A= 10 mm

A= 2,7 mm

* Abutments are also available without screw.* Hex castable abutments are red-coloured for an easy identification.

p. 30



STANDARD MG-INHEX

p. 31

CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

STANDARD MG-INHEX

REF.

23207000

23207010

23207012

23207013

23207014

DESCRIPTION

Hex Prep. Abutment w/s for MG-INHEX STD





STANDARD MG-INHEX HEX PREPABLE ABUTMENT

[ Hex

]

- Titanium Grade V abutment that can be cut- Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Platform: 2.80 mm- Ø: 4 mm- Screwdriver: 1.25 mm Hex




STANDARD MG-INHEX

REF.

23207513

23207514

DESCRIPTION

Aesthetic Hex Prepable Abutment w/s for MG-INHEX STD

Aesthetic Hex Prepable Abutment w/s for MG-INHEX STD

CUFF HEIGHT (H)

3 mm

4 mm

STANDARD MG-INHEX AESTHETIC HEX PREPABLE ABUTMENT

- Titanium Grade V abutment that can be cut - Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Platform: 2.80 mm- Ø: 6.0 mm- Screwdriver: 1.25 mm Hex.


abutment ring height- Usable in situations of high aesthetic

compromise- Torque 30 Ncm.



[ Hex

]

Ø

6,5 mm.

H

STANDARD MG-INHEX

REF.

23207613

23207614

DESCRIPTION

Hex Prep. Abutment Ø5mm w/s for MG-INHEX STD

Hex Prep. Abutment Ø5mm w/s for MG-INHEX STD

STANDARD MG-INHEX HEX PREPABLE ABUTMENT Ø5mm NEW

- Titanium Grade V abutment that can be cut- Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Platform: 2.80 mm- Ø: 5 mm- Screwdriver: 1.25 mm Hex



Ø

A= 6,5 mm.

H

[ Hex

] ALTURA (H)

3 mm.

4 mm.

Ø

A= 6,5 mm.

H

Ø

Ø

6,5 mm.

6,5 mm.

H

H

p. 32



CUFF HEIGHT (H)

1 mm

3 mm

5 mm

1 mm

3 mm

5 mm

REF.

23201015

23201315

23201515

23201020

23201320

23201520

DESCRIPTION

15º Angled prep. abut. w/s for MG-INHEX STD






STANDARD MG-INHEX ANGLED PREPABLE ABUTMENT

[Hex

]

STANDARD MG-INHEX

- Titanium Grade V abutment that can be cut - Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Used to correct disparallelism- Platform: 2.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.



CUFF HEIGHT (H)

1 mm

2 mm

3 mm

4 mm

1 mm

2 mm

3 mm

4 mm

STANDARD MG-INHEX

REF.

23207501

23207502

23207503

23207504

23207521

23207522

23207523

23207524

DESCRIPTION

Non-Hex Prep. Abutment for MG-INHEX STD




Non-Hex Prep. Abut. w/s for MG-INHEX STD




STANDARD MG-INHEX NON-HEX PREPABLE ABUTMENT

- Titanium Grade V abutment that can be cut - Attaches directly to implant- For multiple restorations- For cement retained restorations- Platform: 2.80 mm- Ø: 4 mm- Screwdriver: 1.25 mm Hex




[ Non

Hex

][ 2

pie

ces

]

Ø

6,5 mm.

H

STANDARD MG-INHEX

REF.

23206015

23206315

23206515

23206020

23206320

23206520

DESCRIPTION

15º Angled prep. abut. Ø5mm w/s for MG-INHEX STD






STANDARD MG-INHEX ANGLED PREPABLE ABUTMENT Ø5mm NEW

CUFF HEIGHT (H)

1 mm.

3 mm.

5 mm.

1 mm.

3 mm.

5 mm.

[Hex

]

- Titanium Grade V abutment that can be cut - Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Used to correct disparallelism - Platform: 2.80 mm- Ø: 5.0 mm- Screwdriver: 1.25 mm Hex.



Ø

6,5 mm.

H

Ø

3 mm.

H

p. 33



CUFF HEIGHT (H)

1 mm

2 mm

3 mm

4 mm

5 mm

STANDARD MG-INHEX

REF.

19008530

232086810

232086820

232086830

232086840

232086850

19008505

19008028

19008589

DESCRIPTION

Locator® Analog - Pack 2 units

Locator® Abut.and processing package MG-INHEX STD





Locator® impression coping Pack 4 units.

Locator® bar attachment processing pack

Locator® bar attachment 2mm (2 pack)

STANDARD MG-INHEX LOCATOR® ABUTMENT

[ Non

Hex

] - For overdentures- Accommodates a divergent implant between

10 and 20 degrees (40 degrees between implants)

- Attaches directly to the implant- Platform: 2.80 mm- Ø: 4.0 mm- Use Locator® Core Tool- Torque 20 Ncm

Recommendations for use:- It is convenient to leave the Locator®

abutment at least 1 mm above the soft-tissue level

- The use of the Paralleling Guide will help to avoid problems when placing the abutments

* Males Clear=strong / Pink=light / Blue=Extralight

* Males for divergent implants Green=strong / Red=light

CUFF HEIGHT (H)

1 mm

2 mm

3 mm

4 mm

5.5 mm

STANDARD MG-INHEX

REF.

23208610

23208620

23208630

23208640

23208650

13205521

13208600

DESCRIPTION

Ball Abutment with Plastic cap for MG-INHEX STD





Ball Abutment Analog

(stainless steel)

Plastic Cap

STANDARD MG-INHEX BALL ABUTMENT

[ Non

Hex

] - For overdentures- Up to 10º relative divergence between implants- Attaches directly to the implant- Platform: 2.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.- Stainless steel- Torque 30 Ncm

Recommendations for use:- It is convenient to leave the cuff 1 mm above

the soft tissue- The use of the Paralleling Guide will help to

avoid disparalellism problems when placing the ball abutments

5 mm

4 mm

STANDARD MG-INHEX

REF.

23202112

DESCRIPTION

Temporary. prepable. abutment. hex for chairside modif. for MG-INHEX STD

TEMPORARY PREPABLE ABUTMENT HEX FOR CHAIRSIDE MODIF. INHEX STD NEW

CUFF HEIGHT (H)

2 mm.

[Hex

] - Titanium Grade V abutment that can be cut - Attaches directly to implant- For cement retained restorations- Platform: 2.80 mm- Ø: 5.0 mm- Screwdriver: 1.25 mm Hex.

Recommendations for use:- Soft tissue height must be above the abutment

ring height- Torque 30 Ncm

Ø

11 mm.

p. 34



STANDARD MG-INHEXSTANDARD MG-INHEX TAPERED ABUTMENT

REF.

23201000

23201001

23201002

23201003

23201004

23201005

23203001

23203002

23203003

23203004

23203005

DESCRIPTION

10º tapered abutment MG-INHEX STD











CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

1 mm

2 mm

3 mm

4 mm

5 mm

- For multiple restorations- For overdentures or superstructures- Screw-retained- The 10º or 30ºangle corrects disparallelism- Attaches directly to the implant- Platform: 2.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.

Recommendations for use:- For restorations in soft tissues thicker than

3 mm- To take impressions is recommendable to

use tapered abutments Impression Copings- Torque 30 Ncm.

Transmucosal tapered abutmentfor screw retained restorations

Recommended for immediate loading and compromised cases with damaged periodontal tissues.

Eases the exchange of provisional abutments during the immediate loading protocol.

Improves the emergency profile and maintains the gingival and osseous level.

Avoids the contact of the temporary abutments and impression copings with the wound.Protects the hard and soft perimplantary tissues and eases the prosthetics hygiene.

Flat side that provides an anti-rotational system to the abutment.

Ø

0,75 mm.

H

Ø

2 mm.

H

p. 35



STANDARD MG-INHEX

Ø

11 mm

STANDARD MG-INHEXSTANDARD MG-INHEX TAPERED ABUTMENTS

REF.

13209152

13209151

13209153

13209252

13209251

13209253

13205511

13203511

13205213

13205513 / 30

13205613 / 30

13201000

13201300

23201720

23201730

23201740

13201751

13209117

13205117

13205217

13201017

DESCRIPTION

10º anti-rotational castable post for tapered abut. w/s

10º rotational castable post for tapered abut. w/s


10º anti-rotational titanium post for tapered abut. w/s

10º rotational titanium post for tapered abut. w/s


10º tapered abutment analog


10º anti-rotational impression coping for tapered abut. w/s

10º / 30º rotational impr. coping for tapered abut. w/s

10º / 30º impression coping for tap. abut. closed tray

10º tapered abutment cap (1 piece)


17º angled tapered abutment MG-INHEX STD 2 mm height



Rotational castable post for 17º angled tapered abutment w/s

Rotational titanium post for 17º angled tapered abutment w/s

Rotational 17º angled tapered abutment analog

Rotational impression coping for 17º angledtapered abutment w/s

17º tapered abutment cap

Ø

11 mm

Ø

11 mm

Ø

4,2 mm

- Material: stainless steel



- Grade V Titanium.

- Grade V Titanium.

- Castable abutment.- Torque 20 Ncm.

* Anti-rotational castable abutments are manufactured in red colour for an easy identification.


- Grade V Titanium.- Torque 20 Ncm.


Recommendations for use:- Used to correct disparalellism between

implants.- Used to restore implants with very

divergent emergency angles.


* Anti-rotational titanium abutments are manufactured in purple colour for an easy identification.

* Anti-rotational abutments are manufactured in purple colour for an easy identification.

p. 36



STANDARD MG-INHEXSTANDARD MG-INHEX MORSE TAPER TAPERED ABUTMENT NEW

DESCRIPTION

10º Morse taper tapered abutment MG-INHEX STD











- For multiple restorations- For overdentures or superstructures- Screw-retained- The 10º or 30ºangle corrects disparallelism- Attaches directly to the implant- Platform: 2.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.



use tapered abutments Impression Copings- Torque 30 Ncm.






Ø

0,75 mm.

H

Ø

2 mm.

H

CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

1 mm

2 mm

3 mm

4 mm

5 mm

REF.

23201600

23201601

23201602

23201603

23201604

23201605

23203601

23203602

23203603

23203604

23203605

p. 37



STANDARD MG-INHEX

Ø

11 mm.

STANDARD MG-INHEXSTANDARD MG-INHEX MORSE TAPER TAPERED ABUTMENTS NEW

REF.

13209162

13209161

13209163

13209262

13209261

13209263

13205561

13203561

13205260

13205560 / 63

13205660 / 63

13201060

13201360

DESCRIPTION

10º anti-rotational cast. post for morse taper tapered abut. w/s

10º rotational castable post for morse taper tapered abut. w/s


10º anti-rotational titan. post for morse taper tapered abut. w/s

10º rotational titanium post for morse taper tapered abut. w/s


10º morse taper tapered abutment analog


10º anti-rot. impr. coping for morse taper tapered abut. w/s

10º / 30º rot. impr. coping for morse taper tapered abut. w/s

10º / 30º impr. coping for morse taper tap. abut. closed tray

10º morse taper tapered abutment cap (1 piece)




*Anti-rotational castable abutments are manufactured in red colour for an easy identification.

Ø

11 mm.

Ø

11 mm.

Ø

4,2 mm.

- Grade V Titanium. - Torque 20 Ncm.

*Anti-rotational titanium abutments are manufactured in purple colour for an easy identification.

- Grade V Titanium.


p. 38

Maxi MG-InHex® Prosthetic System


CUFF HEIGHT (H)

3 mm

4 mm

5 mm

6 mm

7 mm

MAXI MG-INHEX

MAXI MG-INHEX

CUFF HEIGHT (H)

2 mm

3 mm

4 mm

5 mm

6 mm

7 mm

MAXI MG-INHEX HEALING ABUTMENTS

REF.

23205020

23205030

23205040

23205050

23205060

23205070

DESCRIPTION

Healing abutment MG-INHEX MAXI






MAXI MG-INHEX AESTHETIC HEALING ABUTMENTS

REF.

23206530

23206540

23206550

23206560

23206570

DESCRIPTION

Aesthetic healing abutment for MG-INHEX MAXI





- Platform: 3.80 mm- Ø: 4.0 mm- Screwdriver: Hex. 1.25 mm




Recommendation for use:- It is convenient to leave 1 mm of the cuff


Ø

H

MAXI MG-INHEX

CUFF HEIGHT (H)

3 mm.

4 mm.

5 mm.

6 mm.

7 mm.

MAXI MG-INHEX HEALING ABUTMENTS Ø5mm. NEW

REF.

23206536

23206546

23206556

23206566

23206576

DESCRIPTION

Healing abutment Ø5mm MG-INHEX MAXI








Ø

H

Ø

H

p. 39



MAXI MG-INHEX

REF.

23205003

23255403

23205006

23205056

23205306

23205066

DESCRIPTION

Hex Impr. Coping for MG-INHEX MAXI

Aesthetic Hex Impr. Coping for MG-INHEX MAXI

Long Hex Imp Coping for MG-INHEX MAXI

Non-Hex Impr. Coping for MG-INHEX MAXI

Aesthetic Non-Hex Impr. Coping for MG-INHEX MAXI

Long Non-Hex Impr. Coping for MG-INHEX MAXI

MAXI MG-INHEX IMPRESSION COPINGS

[ Hex

][ N

on H

ex ]

- Stainless Steel- Screwdriver: Hex 1.25 mm- Platform: 3.80 mm

[ Hex ]- For single or multiple restorations- Used for open or closed tray- Supplied with screw Ref. 23205002 (see page 43)- For hex closed tray use short transfer screw (Page

45, order separately)- Hex impression coping:

Ø: 4.1 mm L= 15 mm A=11 mm- Aesthetic Hex impression coping:

Ø: 6.0 mm L= 15 mm A=11 mm- Long Hex impression coping:

Ø: 4.1 mm L= 18.5 mm A=15 mm

[ Non Hex ]- For multiple restorations- For closed tray only- Non-hex impression coping:

Ø: 4.1 mm L=18.50 mm A=11 mm- Aesthetic non-hex impression coping:

Ø: 6.0 mm L=18.50 mm A=11 mm- Long non-hex impression coping:

Ø: 4.1 mm L=21.50 mm A=14 mm

Recommendations for use:- Maximum tightening torque 10 Ncm.

MAXI MG-INHEX

REF.

23205605

23285605

DESCRIPTION

Implant Analog MG-INHEX MAXI

Analog wrench MG-INHEX MAXI

MAXI MG-INHEX IMPLANT ANALOG

- Stainless Steel- Platform: 3.80 mm- Ø: 5.00 mm


Analog wrenchTo hold the abutment or crown for a comfortable handling at lab or clinic

MAXI MG-INHEX

Ø

A

Ø

AL

L

p. 40



MAXI MG-INHEX

REF.

TITANIUM

23205255

23205355

GOLD

23209850

23209851

DESCRIPTION

Non-Hex Titanium UCLA w/s for MG-INHEX MAXI

Hex Titanium UCLA w/s MG-INHEX MAXI

Hex GOLD BASE UCLA w/s for MG-INHEX MAXI(Gold 60/19)

Non-Hex GOLD BASE UCLA w/s for MG-INHEX MAXI(Gold 60/19)

MAXI MG-INHEX TITANIUM UCLA

- Castable UCLA with Gold Base abutment- Attaches directly to implant- Platform: 3.80 mm- Ø: 4 mm- Screwdriver: 1.25 mm Hex.- Cast with 60/19 Gold alloys.- Melting temperature 1415ºC

Recommendations for use:- Recommended Torque 30 Ncm.- Ensures a correct fit of the abutment to

the implant

- Titanium Grade V abutment- Attaches directly to implant- For cement retained or screwretained

restorations- Platform: 3.80 mm- Ø: 4 mm- Screwdriver: 1.25 mm Hex.


restorations- Recommended Torque 30 Ncm.- Ensures a correct fit of the abutment to

the implant

Ø

A= 10 mm

* Abutments are also available without screw.* Hex castable abutments are red-coloured for an easy identification.

REF.

23257990

13207993

DESCRIPTION

Abutment for Zirconium w/s MG-INHEX MAXI Includes one Sirona®’s CEREC 3D scanbody

Scanbodies (3 pcs each pack)* Compatible with Sirona®’s CEREC 3D


0,55

TITANIUM BASE FOR CAD/CAM. For production of customized mesostructures by CAD/CAM techniques

Mozo-Grau abutment for Zirconium allows the professional to carry out customized restorations using Zirconium over Mozo-Grau implants with the highest possible accuracy.

The abutment for Zirconium can be used as base to cement zirconium structures or mesostructures for unitary or multiple restoration cases, achieving the best possible passive adjustment that allows a safe, predictable and aesthetic result.

Mozo-Grau abutment for Zirconium can be scanned by some of the best scanners currently in the market allowing the use of modern software for infographic design.

Ø

A= 10 mm

A= 2,7 mm

p. 41



MAXI MG-INHEX

REF.

23207050

23207051

23207052

23207053

23207054

DESCRIPTION

Hex Prep. Abut. w/s for MG-INHEX MAXI





CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

MAXI MG-INHEX HEX PREPABLE ABUTMENT

- Titanium Grade V- Attaches directly to implant- For cement retained or screwretained

restorations- Platform: 3.80 mm- Ø: 4.1 mm- Screwdriver: 1.25 mm Hex.


restorations- Torque 30 Ncm.

Ø

6,5 mm

H



[ Hex

]

MAXI MG-INHEX

DESCRIPTION

Hex Prep. Abutment Ø5mm w/s for MG-INHEX MAXI

Hex Prep. Abutment Ø5mm w/s for MG-INHEX MAXI

CUFF HEIGHT (H)

3 mm.

4 mm.

- Titanium Grade V- Attaches directly to implant- For cement retained or screwretained

restorations- Platform: 3.80 mm- Ø: 5 mm- Screwdriver: 1.25 mm Hex.


restorations- Torque 30 Ncm.

MAXI MG-INHEX HEX PREPABLE ABUTMENT Ø5mm. NEW

REF.

23257613

23257614

[ Hex

]

Ø

6,5 mm.

H

CUFF HEIGHT (H)

1 mm

2 mm

3 mm

4 mm

1 mm

2 mm

3 mm

4 mm

MAXI MG-INHEX

REF.

23257501

23257502

23257503

23257504

23257521

23257522

23257523

23257524

DESCRIPTION

Non-Hex Prep. Abut. for MG-INHEX MAXI




Non-Hex Prep. Abut. w/s for MG-INHEX MAXI




MAXI MG-INHEX NON-HEX PREPABLE ABUTMENT

- Titanium Grade V abutment for chair side modification

- Attaches directly to implant- For multiple restorations- For cement retained restorations.- Platform: 3.80 mm- Ø: 4.1 mm- Screwdriver: 1.25 mm Hex.



Ø

Ø

6,5 mm

6,5 mm

H

H


[ Non

Hex

][ 2

pie

ces

]

CUFF HEIGHT (H)

1 mm.

3 mm.

5 mm.

1 mm.

3 mm.

5 mm.

p. 42

MAXI MG-INHEX

DESCRIPTION

Aest. Hex Prep. Abut. w/s for MG-INHEX MAXI

Aest. Hex Prep. Abut. w/s for MG-INHEX MAXI

CUFF HEIGHT (H)

3 mm

4 mm

- Titanium Grade V post for chair side modification

- Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Platform: 3.80 mm- Ø: 6.0 mm- Screwdriver: 1.25 mm Hex


abutment ring height- Usable in situations of high aesthetic

compromise- Torque 30 Ncm.

MAXI MG-INHEX AESTHETIC HEX PREPABLE ABUTMENT

REF.

23257513

23257514


MAXI MG-INHEX

REF.

23251015

23251315

23251515

23251020

23251320

23251520

DESCRIPTION

15º Angled prep. abut. w/s for MG-INHEX MAXI






MAXI MG-INHEX ANGLED PREPABLE ABUTMENT

CUFF HEIGHT (H)

1 mm

3 mm

5 mm

1 mm

3 mm

5 mm


- Attaches directly to implant- For single or multiple restorations- For cement retained restorations- Used to correct disparallelism- Platform: 3.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex



[ Hex

][ H

ex ]



Ø

6,5 mm.

H

Ø

6,5 mm

H

MAXI MG-INHEX

REF.

23256015

23256315

23256515

23256020

23256320

23256520

DESCRIPTION

15º Angled prep. abut. Ø5mm w/s for MG-INHEX MAXI






MAXI MG-INHEX ANGLED PREPABLE ABUTMENT Ø5MM NEW


- Attaches directly to implant- For single or multiple restorations - For cement retained restorations - Used to correct disparallelism- Platform: 3.80 mm- Ø: 5.0 mm- Screwdriver: 1.25 mm Hex



[ Hex

]

Ø

6,5 mm

H

p. 43

CUFF HEIGHT (H)

0.73 mm

2 mm

3 mm

4 mm

5 mm

MAXI MG-INHEX

REF.

19008530

232586810

232586820

232586830

232586840

232586850

19008505

19008028

19008589

DESCRIPTION

Locator Analog pack 2 pcs.

Locator® Abut. and processing package MG-INHEX MAXI





Locator® impression coping Pack 4 units.

Locator® bar attachment processing pack

Locator® bar attachment 2mm (2 pack)

MAXI MG-INHEX LOCATOR® ABUTMENT

- For overdentures- Accommodates a divergent implant

between 10 and 20 degrees (40 degrees between implants)

- Attaches directly to the implant- Platform: 2.80 mm- Ø: 4.0 mm- Use Locator® Core Tool- Torque 20 Ncm

Recommendations for use:- It is convenient to leave the Locator®

abutment at least 1 mm above the soft-tissue level

- The use of the Paralleling Guide will help to avoid problems when placing the abutments

* Males Clear=strong / Pink=light / Blue=Extralight

* Males for divergent implants Green=strong / Red=light

[ Non

Hex

]



MAXI MG-INHEX

REF.

23258610

23258620

23258630

23258640

23258655

13205521

13208600

DESCRIPTION

Ball Abut. with Plastic cap for MG-INHEX MAXI





Ball Abutlment Analog

(stainless steel)

Plastic Cap

MAXI MG-INHEX BALL ABUTMENT

CUFF HEIGHT (H)

1 mm

2 mm

3 mm

4 mm

5.5 mm

- For overdentures- Maximum angle of 10º- Attaches directly to the implant- Platform: 3.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.- Stainless steel- Torque 30 Ncm


above the soft tissue- The use of the Paralleling Guide will help to

avoid disparalellism problems when placing the ball abutments

Ø

3 mm

H

5 mm

4 mm

[ Non

Hex

]

p. 44

MAXI MG-INHEXMAXI MG-INHEX TAPERED ABUTMENTS

REF.

23201050

23201051

23201052

23201053

23201054

23201055

23253001

23253002

23253003

23253004

23253005

DESCRIPTION

10º tapered abutment MG-INHEX MAXI











CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

1 mm

2 mm

3 mm

4 mm

5 mm

- For multiple restorations- For overdentures or superstructures- For screw-retained restorations- The10º or 30º angle corrects disparallelism- Attaches directly to the implant- Platform: 3.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.



use tapered abutments impression copings- Torque 30 Ncm.

Flat side that provides an anti-rotational system to the abutment.








Ø

2 mm

H

Ø

0,75 mm

H

p. 45

Ø

11 mm

MAXI MG-INHEXMAXI MG-INHEX TAPERED ABUTMENTS

REF.

13209152

13209151

13209153

13209252

13209251

13209253

13205511

13203511

13205213

13205513 / 30

13205613 / 30

13201000

13201300

23251720

23251730

23251740

13201751

13209117

13205117

13205217

13201017

DESCRIPTION

10º anti-rotational castable post for tapered abut. w/s



10º anti-rotational titanium post for tapered abut. w/s





10º anti-rotational impression coping for tapered abut. w/s

10º / 30º rotational impr. coping for tapered abut. w/s

10º / 30º impression coping for tap. abut. closed tray



17º angled tapered abutment MG-INHEX MAXI 2 mm height



Rotational castable post for 17º angled tapered abutment w/s

Rotational titanium post for 17º angled tapered abutment w/s

Rotational 17º angled tapered abutment analog w/s

Rotational impression coping for 17º angledtapered abutment w/s

17º tapered abutment cap

Ø

11 mm

Ø

11 mm

Ø

4,2 mm






* Anti-rotational castable abutments are manufactured in red colour for an easy identification.




Recommendations for use:- Used to correct disparalellism between

implants.- Used to restore implants with very

divergent emergency angles.


* Anti-rotational titanium abutments are manufactured in purple colour for an easy identification.



- Grade V Titanium.

- Grade V Titanium.

p. 46








MAXI MG-INHEX

- For multiple restorations- For overdentures or superstructures- For screw-retained restorations- The10º or 30º angle corrects disparallelism- Attaches directly to the implant- Platform: 3.80 mm- Ø: 4.0 mm- Screwdriver: 1.25 mm Hex.



use tapered abutments impression copings- Torque 30 Ncm.

MAXI MG-INHEX MORSE TAPER TAPERED ABUTMENT NEW

REF.

23201650

23201651

23201652

23201653

23201654

23201655

23253601

23253602

23253603

23253604

23253605

DESCRIPTION

10º Morse taper tapered abutment. MG-INHEX MAXI











Ø

0,75 mm.

H

Ø

2 mm.

H

CUFF HEIGHT (H)

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

1 mm

2 mm

3 mm

4 mm

5 mm

p. 47



Ø

11 mm.

MAXI MG-INHEXMAXI MG-INHEX MORSE TAPER TAPERED ABUTMENTS NEW

REF.

13209162

13209161

13209163

13209262

13209261

13209263

13205561

13203561

13205260

13205560 / 63

13205660 / 63

13201060

13201360

DESCRIPTION

10º anti-rotational cast. post for morse taper tapered abut. w/s



10º anti-rotational titan. post for morse taper tapered abut. w/s





10º anti-rot. impr. coping for morse taper tapered abut. w/s

10º / 30º rot. impr. coping for morse taper tapered abut. w/s

10º / 30º impr. coping for morse taper tap. abut. closed tray





*Anti-rotational castable abutments are manufactured in red colour for an easy identification.

Ø

11 mm.

Ø

11 mm.

Ø

4,2 mm.

- Grade V Titanium. - Torque 20 Ncm.

*Anti-rotational titanium abutments are manufactured in purple colour for an easy identification.

- Grade V Titanium.


p. 48

CUFF HEIGHT (H)

2 mm

2 mm

2 mm

2 mm

2 mm

MG-INHEXMG-INHEX TEMPORARY TITANIUM UCLA ABUTMENT

REF.

23204110

23254110

23205110

23255110

DESCRIPTION

Temporary titanium Hex UCLA for MG-INHEX STD w/s

Temporary titanium Hex UCLA for MG-INHEX MAXI w/s

Temporary titanium Non-hex UCLA for MG-INHEX STD w/s

Temporary titanium Non-hex UCLA for MG-INHEX MAXI w/s


- Attaches directly to implant- Screw retained- Screwdriver: 1.25 mm Hex- Retaining Surface- Easy fixation of the temporary prosthesis

Recommendations for use:- For temporary restorations to be placed for

up to 2 or 3 months- Torque 10 Ncm.

Ø

10 mm

MG-INHEX

REF.

23207151

23207155

23208151

23208155

DESCRIPTION

Temporary castable non hex UCLA MG-INHEX STD w/s

Temporary castable non hex UCLA MG-INHEX MAXI w/s

Temporary castable hex UCLA MG-INHEX STD w/s

Temporary castable hex UCLA MG-INHEX MAXI w/s

MG-INHEX TEMPORARY CASTABLE UCLA ABUTMENT

Ø

A= 10 mm

* Abutments are also available without screw.* Anti-rotational castable abutments are manufactured in red colour for an easy identification.

*Abutments are also available without screw

- Temporary castable abutment- For direct to implant restorations- For screw retained restorations- Platform STD: 2.80 mm- Platform MAXI: 3.80 mm- Ø: 4 mm - Screw driver: 1.25 mm hex

Recommendations for use:- For unitary restorations is recommended to

use hex abutments- Torque 10 Ncm

MG-INHEX2 MM HEIGHT MG-INHEX TEMPORARY PREPABLE ABUTMENT

REF.

23232110

23202110

23252110

23203110

23253110

DESCRIPTION

Temp. Prep. Abut. Hex for chair side modif. MG-INHEX MINI w/s

Temp. Prep. Abut. Hex for chair side modif. MG-INHEX STD w/s

Temp. Prep. Abut. Hex for chair side modif. MG-INHEX MAXI w/s

Temp. Prep. Abut. Non-Hex for chair side modif. MG-INHEX STD w/s

Temp. Prep. Abut. Non-Hex for chair side modif. MG-INHEX MAXI w/s


- Attaches directly to implant- For single or multiple restorations- Screw retained- Screwdriver: 1.25 mm Hex- Retaining Surface- Easy fixation of the temporary prosthesis- Ø MINI: 2.3 mm- Ø STD: 2.8 mm- Ø MAXI: 3.8 mm


up to 2 or 3 months- Torque 10 Ncm

* Plastic cap included, except on MG-Inhex MINI. To place between the temporary crown and the abutment to ensure a better fit

* Abutments are also available without screw Plastic capFacilitates and ensures a correct passive adjustment of the aesthetic temporary crown.

[ Hex

][ H

ex ]

[ Hex

][ N

on H

ex ]

[ Non

Hex

][ N

on H

ex ]

Temporary Prostheses/Immediate Loading MG-InHex®


Ø

6,5 mm

H

7,6 mm

p. 49

MG-INHEX

MG-INHEX

TEMPORARY CASTABLE POST FOR TAPERED ABUTMENT

REF.

13205110

13205130

DESCRIPTION

Temporary castable post for 10º tapered abut. w/s

Temporary castable post for 30º tapered abut. w/s

- Abutment for chair side modification- Screwdriver: 1.25 mm Hex.- Screw retained- Retaining Surface- Easy fixation of the temporary prosthesis



TEMPORARY TITANIUM POST FOR TAPERED ABUTMENT

REF.

13206110

13206130

DESCRIPTION

Temporary Titanium post for 10º Tapered Abut. w/s

Temporary Titanium post for 30º Tapered abut. w/s




Temporary post for tapered abutmentAllows the retention of the temporary prosthesis during the immediate loading procedure.

[ Non

Hex

][ N

on H

ex ]



Ø

11 mm.

MG-INHEXTEMP. CAST. POST FOR MORSE TAPER TAPERED ABUTMENT NEW

REF.

13205160

13205163

DESCRIPTION

Temporary castable post for 10º morse taper tapered abut. w/s

Temporary castable post for 30º morse taper tapered abut. w/s




Ø

11 mm.

[ No

Hex

]

MG-INHEXTEMP. TITANIUM POST FOR MORSE TAPER TAPERED ABUT. NEW

REF.

13206160

13206163

DESCRIPTION

Temporary Titanium post for 10º morse taper tapered abut. w/s

Temporary Titanium post for 30º morse taper tapered abut. w/s




Ø

11 mm.

[ No

Hex

]

Ø

11 mm.



MG-INHEXRETAINING CAP FOR TAPERED ABUTMENT

REF.

13201200

13201230

DESCRIPTION

Retaining cap for 10º tapered abutment with screw

Retaining cap for 30º tapered abutment with screw - Screw retained.- Screw driver: 1.25 mm hex.- Retaining surface.- Easy fixation of the temporary prosthesis



Ø

6 mm

Retaining cap for tapered abutmentAllows the adaptation of the patient’s temporary prosthesis during the immediate loading procedure.

[ Non

Hex

]p.

50







MG-INHEX

MG-INHEX

TEMPORARY TITANIUM POST FOR ANGLED TAPERED ABUTMENT

TEMPORARY CASTABLE POST FOR ANGLED TAPERED ABUTMENT

REF.

13206710

REF.

13205710

DESCRIPTION

Temporary Titanium post for 17º angled tapered abutment

DESCRIPTION

Temporary Castable post for 17º angled tapered abutment

[ No

Hex

][ N

o He

x ]

RETAINING CAP FOR MORSE TAPER TAPERED ABUTMENT NEW

REF.

13201260

13201263

DESCRIPTION

Retaining cap for 10º morse taper tapered abutment with screw

Retaining cap for 30º morse taper tapered abutment with screw

Ø

6 mm.[ No

Hex

]

p. 51

MG-INHEX

[ MINI ]- Ø head: 2.1 mm Ø thread: 1.4 mm

[ STANDARD ]- Ø head: 2.4 mm Ø thread: 1.6 mm

[ MAXI ]- Ø head: 2.4 mm Ø thread: 2.0 mm

STD MG-INHEX Lab Screw - Ø Head: 2.4 mm Ø Thread: 1.6 mm A=2.3

mm L=8.4 mm

MAXI MG-INHEX Lab Screw - Ø Head: 2.4 mm Ø Thread: 2.0 mm A=2.3

mm L=9.7 mm

Ø ØØ

A

L

A

L

Ø Ø

L L

A A

L

A

Ø

A

L

Screws for abutments and transfers


STANDARD MG-INHEX IMPLANT

MINI MG-INHEX IMPLANT

MAXI MG-INHEX IMPLANT

REF.

23205504

23205502

23205505

23202526

23202508

232010151

13202528

23201726

13201727

23282526

REF.

23235504

23235502

23235505

23232526

232310151

DESCRIPCIÓN

Short transfer screw L=17 mm A=9 mm MG-INHEX MINI

Long transfer screw L=23 mm A=17 mm MG-INHEX MINI

Transfer screw for waxing MG-INHEX MINI Ø head=2.1 mm Ø thread= 1.4. L=29 mm A=23 mm

Retaining screw hex. 1.25 mm L= 8.6 mm MG-INHEX MINI

Retaining screw for angled abutment L= 8.20 mm MG-INHEX MINI

REF.

23205004

23205002

23205005

23205025

23202509

232510151

13202528

23251726

13201727

23285025

DESCRIPTION

Short transfer screw L=14 mm A=8 mm MG-INHEX STD

Long transfer Screw L=20 mm A=14 mm MG-INHEX STD

Transfer screw for waxing L=26 mm A=20 mm MG-INHEX STD

Retaining screw Hex 1.25 mm L=7.7 mm A=1.7 mm MG-INHEX STD

Ret. screw w/slot for dif. sit. L=6.9 mm A=1.2 mm MG-INHEX STD

Ret. screw for ang. abut. L=6.9 mm A=1.2 mm MG-INHEX STD

Prosthetic screw for castable/titanium tapered abutment L=4.7 mm A=1.7 mm MG-OSSEOUS/INHEX

Retaining screw for 17º angled tapered abut. MG-INHEX STD

Prosth. screw for 17º angled tap. abut. MG-OSSEOUS/INHEX

Lab screw MG-INHEX STD (5 pcs)

DESCRIPTION

Short transfer screw L=14 mm A=8 mm MG-INHEX MAXI

Long transfer Screw L=20 mm A=14 mm MG-INHEX MAXI

Transfer screw for waxing L=26 mm A=20 mm MG-INHEX MAXI

Ret. screw Hex 1.25 mm L=7.7 mm A=1.7 mm MG-INHEX MAXI

Ret. screw w/slot for dif. sit. L=6.9 mm A=1.2 mm MG-INHEX MAXI

Ret. screw for angled abut. L=6.9 mm A=1.2 mm MG-INHEX MAXI

Prosthetic screw for castable/titanium tapered abutment L=4.7 mm A=1.7 mm MG-OSSEOUS/INHEX

Retaining screw for 17º angled tapered abutment MG-INHEX MAXI

Prost. screw for 17º angled tapered abutment MG-OSSEOUS/INHEX

Lab screw MG-INHEX MAXI (5 pcs)

MG-Fidelis®

Surgical kit for Computer-Guided Surgery

Fidelis

Surgicalmaterial

p. 54

PRE-TREATMENT

TREATMENT DURING USE

TREATMENT AFTER USE

Surgical material. Instructions for maintenance

Instructions for maintenance of surgical instruments

All products must be cleaned, disinfected and sterilized prior to use; this applies in particular prior to first use

i.e. after delivery as all products are supplied nonsterile. The thorough cleaning and disinfecting is indispensable

in order to achieve effective sterilization. The disinfectant used during pre-treatment only ensures personal

protection and can be no substitute for the disinfection procedure to be used later after completion of the

cleaning process.

During use, separate the soiled instruments to avoid further contamination of the instrument tray. Clean /

disinfect the soiled products, arrange them in the instrument tray, and sterilize only the instruments that will

be used.

Impurities must be removed from the products directly after use. To do so, use distilled water or a disinfectant

solution; the disinfectant must not contain aldehyde (which could fix blood residues to the instrument surface).

1. Choosing the cleaning / disinfecting agents: It is recommended to use a neutral/enzymatic detergent

(minimum admissible pH value 5.5). It should contain neither bleach nor Organic solutions (e.g. alcohols,

ether), nor oxidants (e.g. hydrogen peroxides), nor halogens (chlorine, iodine, bromine). Caution should be

paid with tap water as it may contain too much chlorine. Avoid solutions with aldehyde (which could fix

blood residues to the instrument surface).

2. Choosing the products for the cleaning process: For the manual removal of impurities, only use

nylon brushes. Never use metal brushes or steel wool. Use a wire to clean the internal cooling canal of the

drills (Not applicable to RCD drills).

3. How to clean / disinfect the surgical instruments: Eliminate thoroughly all the post-operative

residues (blood, bone....). As to products with lumen (cavities), such as drills with internal cooling, rinse

all cavities by using a disposable syringe and a wire for this purpose (Not applicable to RCD drills). Do

not clean, implant drills with other tools made of different material, in the same ultrasonic box. During

the cleaning process in ultrasonic box, avoid as much as possible, shocks and contacts with other drills or

instruments. Rinse and dry the drills immediately after the cleaning process (preferably use distilled water

to rinse). Never store instruments while they are still wet.

4. How to sterilize: Sterilization by wet heat autoclaving 134 ºC (273 ºF) - 18 minutes (5 minutes in case

of RCD drills). Make sure that the elements, inside the autoclave, are not rusted. Wrap the elements in

sterilization packaging intended for this purpose. Never allow surgical instruments to touch one another

while being sterilized. Surgical instruments and sterilization trays should never be exposed to temperatures

exceeding 137 °C (279 °F).

REF. 15400004

Locator drill

2.0 mm twist drill

Conical drills:

3.0 / 3.3 / 3.8 / 4.3 / 4.7 mm

Profile drills: 3.3 / 3.7 / 4.2 / 4.95 mm

Conical drills for hard bones:

3.2 / 3.5 / 4.0 / 4.9 mm

1.25 mm long hex screwdriver

Paralleling pins: 4.1 / 5.0 mm

C/A implant mount driver

16 mm ratchet wrench extender

15 mm drill extender

STD MG-INHEX depth gauge

MAXI MG-INHEX 20 mm long implant mount

STD MG-INHEX 20 mm long implant mount

Hexed hand wrench

Ratchet wrench with Hex. converter

Open-end wrench

Surgical kit box

MG-INHEX SURGICAL KIT

Locator drill

2.0 mm twist drill.

3.0 mm conical drill.

3.3 mm conical drill




3.2 mm conical drill. Hard bone




2.0 mm long twist drill.

3.0 mm long conical drill.

3.3 mm long conical drill




3.3 mm profile drill




3.3 mm bone tap

3.75 mm bone tap

4.25 mm bone tap

5.0 mm bone tap

Paralleling pins (2 units)

STD MG-INHEX depth gauge

MAXI MG-INHEX depth gauge

STD MG-INHEX long implant mount

MAXI MG-INHEX long implant mount

4.0 mm C/A circular tissue punch

5.0 mm C/A circular tissue punch

Drill extender



C/A Implant mount driver

Ratchet wrench with Hex converter

Open-end wrench

1.25 mm short hex screwdriver

1.25 mm long hex screwdriver

1.25 mm short C/A hex screwdriver

1.25 mm long C/A hex screwdriver

Plus surgical kit box

MG-INHEX PLUS SURGICAL KIT

REF. 15405430

Surgical material. Surgical kits

Surgical kits

p. 55

RCD STRAIGHT CONICAL DRILLS NEW

Surgical material. Drills for implants

p. 56

Drills for implants

- Color ring- Long drills lenght: 20 mm- Short drills length: 16 mm- Material: Stainless steel- Internal irrigation- Short drills depth marks: 8-9-10-11.5-13-15 mm- Long drills depth marks:

8-9-10-11.5-13-15-18-20 mm

Recommendations for use:- Use and sterilise the drills up to 3 surgeries- Sterilise only the drills used in the surgery

REF.

13903230

13903233

13903238

13903243

13903247

13923230

13923233

13923238

13923243

13923247

REF.

13903230

13903233

13903238

13903243

13903247

13963230

13963233

13963238

13963243

13963247

ø

3.0 mm

3.3 mm

3.8 mm

4.3 mm

4.7 mm

3.0 mm

3.3 mm

3.8 mm

4.3 mm

4.7 mm

ø

3.0 mm

3.3 mm

3.8 mm

4.3 mm

4.7 mm

3.0 mm

3.3 mm

3.8 mm

4.3 mm

4.7 mm

LENGTH

16 mm

16 mm

16 mm

16 mm

16 mm

20 mm

20 mm

20 mm

20 mm

20 mm

LENGTH

16 mm

16 mm

16 mm

16 mm

16 mm

20 mm

20 mm

20 mm

20 mm

20 mm

STRAIGHT CONICAL DRILLS

LOCATOR DRILLS

- Material: Stainless steel - Internal irrigation - Locator drill depth marks: 8-9 mm - 2.0 mm drills depth marks: 8-9-10-11.5-13-15

mm - 6-mm depth mark drill depth marks: 6-8-9-10-

11.5-13-15 mm- 2.0 mm Long drills depth marks: 8-9-10- 11.5-

13-15-18-20 mm

Recommendations for use:- Use and sterilise the drills up to 3 surgeries (RCD

Drills 5 surgeries)- Sterilise only the drills used in the surgery

- Color ring- Drills lenght: 16 mm- Material: Stainless steel, Diamong-Like Carbon

coated- No internal irrigation- Depth marks: 8-9-10-11.5- 13-15 mm- Long drills depth marks:

8-9-10-11.5-13-15-18-20 mm Recommendations for use: - Use and sterilise the drills up to 5 surgeries- Sterilize only the drills used in the surgery

REF. ø LENGTH DEPTH MARKING

13202020 1.5-2.2mm 8 mm

132020206 6 mm

13901620 2.0 mm 16 mm

139016206 2.0 mm 16 mm 6 mm

13911620 new rdc 2.0 mm 16 mm

13902120 2.0 mm 21 mm

Drills for implants

- Color ring- Drills lenght: 16 mm- Material: Stainless steel- Internal irrigation- Depth marks: 6- 8-9-10-11.5- 13-15 mm

Recommendations for use:- 3 uses- Sterilize only the drills used in the surgery

REF.

139032306

139032336

139032386

139032436

139032476

Ref.

Short straight conical drill 3.0 mm - 6 mm depth mark





STRAIGHT CONICAL DRILLS WITH 6 MM DEPTH MARK

REF.

13903232

13903235

13903240

13903249

ø

3.2 mm

3.5 mm

4.0 mm

4.9 mm

STRAIGHT CONICAL DRILLS FOR HARD BONE

LENGTH

16 mm

16 mm

16 mm

16 mm

- Double color ring- Short drills lenght: 16 mm- Material: Stainless steel- Internal Irrigation- Short drills depth marks: 8-9-10-11.5-13-

15 mm

Recommendations for use:- Use and sterilise the drills up to 3 surgeries- Sterilise only the drills used in the surgery


p. 57

RCD STRAIGHT CONICAL DRILLS FOR HARD BONE

REF. ø LENGTH- Double color ring- Drills lenght: 16 mm- Material: Stainless steel, Diamong-Like Carbon

coated- No internal irrigation- Depth marks: 8-9-10-11.5- 13-15 mm

Recommendations for use:- 5 uses- Sterilize only the drills used in the surgery

13913232 new 3,2 mm 16 mm

13913235 new 3,5 mm 16mm

13913240 new 4,0 mm 16mm

13913249 new 4,9 mm 16mm


p. 58

Drills for implants

REF.

13102032

13102037

13102042

13102049

DESCRIPTION

Profile drill 3.3 mm MG-INHEX




PROFILE DRILLS

- Material: Stainless steel

Recommendations for use:- Sterilise only the drills used in the surgery

BONE TAPS

- Material: Stainless steel- Depth marks: 6-8-9-10-11.5-13-15 mm

Recommendations:- Drill speed: 15 rpm

REF.

13107340

13107375

13107425

13107500

DESCRIPTION

Bone tap 3.3 / 3.40 mm MG-OSSEOUS/INHEX

Bone tap 3.75 mm MG-OSSEOUS/INHEX

Bone tap 4.25 mm MG-OSSEOUS/INHEX

Bone tap: 5.0 mm MG-OSSEOUS/INHEX

RCD DRILL STOP KIT

This kit is composed of all the stop range for Mozo Grau RCD (Diamond-like carbon) drills

Instructions for use: 1. Insert the drill into the contra-angle and

select the appropriate drill stop according to the desired drillings depth.

2. Insert the drill to the end of drill stop.3. Verify drilling depth by using the drill

depth guide. 4. To release the stop from the drill, insert

the contra-angle in the appropriate metallic sheet and pull up. The stop will fall safely into the box.

REF. DESCRIPTION- Sterilizable material- Delivers stop easy pick-up and release.- Stop color-coding and organization in

the box aid in easy identification.- Reduced size to facilitate storage and

sterilization.- Measurement guide aid to ensure a

safe drilling process.- Depth identification for each stop

group (A, B or C).

15400007 new DRILL STOP KIT

This kit includes 21 drill stops to place implants (from 6 mm to 15 mm long) with RCD (Diamond-like carbon) drills

Surgical material

LONG IMPLANT MOUNTS

REF.

23207004

23207001

23207009

DESCRIPTION

Long implant mount 20 mm INHEX MINI

Long implant mount 20 mm INHEX STD

Long implant mount 20 mm INHEX MAXI

Recommendations for use:- Replace the normal implant mount in

difficult situations (limited interdental space available).

- Millimeter marks: useful on flapless surgeries

SURGICAL WRENCHES

REF.

23208000

14608010

14650185

18089021

14659021

13209022

DESCRIPCIÓN

Open-end wrench

Ratchet wrench

Dynamometrical ratchet wrench 45 Ncm.

Multiconverter for C/A latch

Hexed dynamometrical ratchet wrench adapter

Hexed hand wrench

Open-end wrench Recommendations for use: - To hold the implant mount while it is

unscrewed. Suitable for cases with little primary stability.

Ratchet wrench: Recommendations for use: - To insert implant - To insert non-traumatic bone expanders

Dynamometrical ratchet wrenchRecommendations for use: - To ensure a proper implant insertion torque

Multiconverter for C/A latchRecommendations for use: - To be used with C/A tissue punches and C/A

screwdrivers

Hexed dynamometrical ratchet wrenchRecommendations for use:- To insert implant with the dynamometrical

ratchet wrench

Hand wrench Recommendations for use: - To insert implant by hand

Surgical material. Surgical Wrenches

p. 59

REF. DESCRIPTION- Sterilizable material- Delivers stop easy pick-up and release.- Stop color-coding and organization in

the box aid in easy identification.- Reduced size to facilitate storage and

sterilization.- Measurement guide aid to ensure a

safe drilling process.- Depth identification for each stop

group (A, B or C).

15400007 new DRILL STOP KIT

This kit includes 21 drill stops to place implants (from 6 mm to 15 mm long) with RCD (Diamond-like carbon) drills

p. 60

Surgical material

RATCHET WRENCH AND DRILL EXTENDERS

REF.

23208009

23208016

14602000

DESCRIPTION

Ratchet wrench extender 9 mm

Ratchet wrench extender 16 mm

Drill extender 15 mm

Recommendations for use: - To be used when limited interdental space

is available. - To be used when adjacent teeth height does

not allow C/A a proper drilling. - In some cases, to be used to replace long

drills.

C/A IMPLANT MOUNT DRIVER AND CONVERTER

REF.

23209021

23209121

DESCRIPTION

C/A implant mount driver

Square to Hexagon converter for Ratchet wrench

Recommendations for use: - To insert implants with C/A

DEPTH GAUGES

REF.

23209006

23209007

23209008

13109009

DESCRIPTION

1.7 – 2.5 mm depth gauge. MINI MG-INHEX

1.8 – 3.2 mm depth gauge. STD MG-INHEX

2.2 – 4.1 mm depth gauge. MAXI MG-INHEX

2.0 mm angled depth gauge

- Material: stainless steel- D epth marks:

8-9-10-11,5-13-15 mm.

PARALLELING PIN

- To ensure implant parallelism at the beginning of the surgery

- The pin ring matches the implant platform

REF.

13109034

13109041

13109050

DESCRIPTION

Paralleling pin for MINI platform

Paralleling pin for STD platform

Paralleling pin for MAXI platform

Ø

Surgical material. Surgical Wrenches

- An easy system for bone expansion or pressing which allows a measured and progessive control. Indicated for thin crests or type IV bone crests (pressing). It allows a perfect control of the implants insertion axis.

- Surgical technique: The expanders should be introduced following a slow and sequential method. Once an excessive resistance is encountered, the insertion should be stopped for a few seconds to avoid heating and, then, continue with the normal insertion sequence until the desired depth is reached. The size pattern will help to identify the exact width of each expander according to their depth markings.

Recommendations for use:- Recommended for thin crests or to compact

bone in crest where Tipe IV bones are present. Recommendable only for upper maxilla

Upper maxilla bone expansion with MG-Expanders

NON-TRAUMATIC MG-EXPANDERS SET

REF.

13203041

13200445

DESCRIPTION

Non-traumatic MG-Expanders set. Size pattern and hand wrench included

Hand wrench for MG-Expanders

Advanced surgery. Bone expansion

Bone expansion

p. 61

Advanced surgery. Accessories

Accessories

BONE COLLECTOR

REF.

14309110

13109110

DESCRIPTION

Bone collector with aspirator tip

Disposable Filter Cartridge, sterile. One single use.

- By using the bone collector during the osteotomy with saws, handpieces, crest regularisations, etc., we will obtain a great amount of graft material to repair different types of tissues

Recommendations for use:- It is recommended the use of the bone

collector only during the drilling process and only for this process. Use another aspirator tip to draw in blood and saliva and approach as much as possible the aspirator tip to the drill

PARALLEL PIN GUIDEREF.

17690035

DESCRIPTION

Parallel Pin Guide

- To secure parallelism between implant- Drill an alveolus with the 2.0 mm drill. Enter

the spike into this alveolus and adjust the hinge until the open arm reaches the desired location of the following implant. Then, drill a new alveolus through the open end guide hole

Recommendations for use:- Mandatory to be used when placing

ball abutments in overdentures to avoid disparallelism

p. 62

www.mozo-grau.com

HEADQUARTERS

SPAINMOZO-GRAU S. A.C/ Santiago López González, 7. 47197 ValladolidTel: +34 983 211 312Fax: +34 983 304 [email protected]

SUBSIDIARY

POLANDMOZO-GRAU Sp. z o.o.ul. Grójecka 22/24 lok. 52. 02-301 Warszawatel./fax: +48 22 658 41 [email protected]

www.mozo-grau.com

Follow us:

A L B A N I A C H I L E C H I N A C O L O M B I A E G Y P T I R A N

I TA LY M E X I C O P O L A N D R O M A N I A S P A I N TA I WA N

DISTRIBUTOR

Documents

Catalogue - Implant Training › NdSite › OnLineCache › FMS › 42 › 7… · We are pleased to introduce our new MG In-Hex Catalogue 2015. ... in 1996, Mozo-Grau was created