Upload
others
View
20
Download
1
Embed Size (px)
Citation preview
AIR ENERGY CATALOGUE
Headquarters ANEST IWATA Corporation
Founded May 1st, 1926
Established June 2nd, 1948
Capital 3354 mil Yen / 25 mil EUR
Listed Stock First section of the Tokyo Stock Exchange, listed in 1973
Main Business • Air compressors and associated products
• Spray painting equipment, liquid application equipment, associated products and installation
• Vacuum pumps and associated products
Accounting Term March 31st
Number of Employees 1,415 / Japanese: 602 (43%) and Other: 813 (57%) including group companies
Domestic Bases Headquarters, 2 plants and 20 branches
Group 41 companies (Outside Japan : 35)
Accounting Period March, 31
Oilfree Scroll CompressorSimplex Scroll CompressorsMultiplex Scroll Compressors
Oilfree Piston CompressorOilfree Reciprocating Compressors
Screw CompressorOil Lubricate Screw Compressors
Oilfree Scroll Vacuum PumpDry Scroll Vacuum Pump
CONTENTS
The Most Advanced Technologiesfor High-Quality air
Scroll Compression Principle
Oilfree Drain
High-precision processing technology is required to produce the components that make up a Scroll Compressor.We have developed new Scroll Air-Ends thanks to the experience and know-how we have accumulatedover the past 20 years.
As the orbiting scroll goes from No.1 to No.4 position,the size of the symmetrical crescent-shaped compression chambers is gradually reduced, compressingthe air contained within . This is then discharged through the central exhaust port.
Drainage from oil-lubricated compressors requires proper treatment as it contains oil. Oilfree scroll compressors, on the other hand, are eco-friendly, their drain is cleanand does not contain oil, therefore avoiding the cost of drain disposal.
Drainage from anoilfree compressor
Drainage from anoil-lubricated compressor
1 2 3 4
Orbiting scroll Fixed scroll Compression chamber
Clean
Class Zero Certification
What is Class Zero?Air from oil-lubricated compressors contains oiland can contaminate the piping. This does not happenwith an Oilfree Scroll Compressor which produceshigh-quality oilfree air.
TÜV (independent third party test house) has just certified that the air quality from our oilfree scroll compressors is in conformity with “Class 0 (ISO8573-1:2010[-:-:0])“.
ISO8573-1(JIS B8392-1) defines quality classesfor compressed air. Class Zero indicates wall flow oil, oil mistand oil vapor are completely absent. As oil vapor in particular cannot be absorbed by conventional air filters, it is important factories that require clean air use Class Zero compressors.
Wall Flow Oil
Oil Vapor
Oil Mist
CLASS Oil Concentration mg/m³
0As specified by the equipment user or supplier and more stringent the Class 1
1 0.01
2 0.1
3 1
4 5
1
12
3
3
2
INSIDE THE PIPING OF AN OIL-LUBRICATED COMPRESSOR
INSIDE THE PIPING OF AN OILFREE COMPRESSOR
Simplex Oilfree Scroll Compressors
Features• 8.000 hrs. maintenance free*3
• Class Zero oilfree air• Low noise level• Low vibration• Compact size• Wheels for easy relocation• Membrane dryer model available
0.75 kW (1HP)
Aluminium air receiver(anti-rust coated)
49dB(A)
• SLPE-07E
*1 F.A.D. is measured at max working pressure. *2 Noise level measured at a distance of 1M according to ISO11201; tolerance±3dB*3 Except intake filter• It is recommended to install air filters and an external receiver tank after the compressor.• Even with Class Zero compressors, oil may be found in the piping. This may be caused by the presence of oil in the piping before installation of the compressor or by accident during the production process
Casters for better mobility
Principle of membrane
Features of Membrane Dryer
• Environmentally friendly; no Freon gas
• Purge-cut function
Membrane dryerScroll air-end (1HP)(Direct-Driven)
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
Dryerpressure dew point
Tankcapacity
NetDimensions
(WxDxH)
NetWeight
Voltage
kW HP bar MPa L/min m3/h dB(A) size °C L mm kg Volt/Hz/Pha
SLPE-07E
0.75 1Pressure switch
8 0.870 4.2
49 Rc 3/8[ball valve]
-5
(internal)
335x590x690 50230/50/1
SLPE-07ED 60 3.6 15 335x660x690 52
SLPE-55(1)F-75(1)F
Features• 10.000 hrs. maintenance free*3 • Class Zero oilfree air• IE3 premium efficiency motor• Control panel for easy operation in 5.5/7.5kW model• Low noise level• Low vibration
Hourmeter
EmergencyStop button
Pressuregauge
Motor
Scrollair-end
SLPE-15(1)E-37(1)E
Simplex Oilfree Scroll Compressors1.5 kW (2HP) - 7.5 kW (10HP)
8 bar models
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Tank capacity
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg L Volt/Hz/Pha
Standard
SLPE-15E 1.5 2Pressureswitch
8 0.8
155 9.3 54
Rc 3/8 535x685x745
80
-
230/50/1
SLPE-22E-T 2.2 3 243 14.6 56 85
400/50/3SLPE-37E 3.7 5 404 24.2 59 105
SLPE-55F 5.5 7.5 Pressuresensor
596 35.8 55Rc 3/4 650x970x1195
205SLPE-75F 7.5 10 808 48.5 57 210
w/TankSLPE-15E-90 1,5 2
Pressureswitch
8 0.8155 9.3 56
Rc 3/8 1120x600x1325145
90230/50/1
SLPE-22E-T-90 2,2 3 243 14.6 61 150400/50/3
SLPE-37E-90 3,7 5 404 24.2 59 165
w/Tank w/Dryer
SLPE-15ED-90 1,5 2Pressureswitch
8 0.8
155 9.3 57
Rc 3/8 1310x600x1325
185
90
230/50/1SLPE-22ED-T-90 2,2 3 243 14.6 63 190
400/50/3SLPE-37ED-90 3,7 5 404 24.2 60 205
10 bar models
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Tank capacity
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg L Volt/Hz/Pha
StandardSLPE-151E 1.5 2
Pressureswitch
10 1.0119 7,1 55
Rc 3/8 535x685x74580
-230/50/1
SLPE-221E-T 2.2 3 207 12,4 57 85400/50/3
SLPE-371E 3.7 5 337 20,2 59 105
w/TankSLPE-151E-90 1,5 2
Pressureswitch
10 1.0119 7,1 58
Rc 3/8 1120x600x1325145
90230/50/1
SLPE-221E-T-90 2,2 3 207 12,4 57 150400/50/3
SLPE-371E-90 3,7 5 337 20,2 62 165
w/Tank w/Dryer
SLPE-151ED-90 1,5 2Pressureswitch
10 1.0
119 7,1 59
Rc 3/8 1310x600x1325
185
90
230/50/1SLPE-221ED-T-90 2,2 3 207 12,4 58 190
400/50/3SLPE-371ED-90 3,7 5 337 20,2 66 205
*1 F.A.D. is measured at max working pressure.*2 Noise level measured at a distance of 1M according to ISO11201; tolerance±3dB*3-1 Except intake filter*3-2 5000 hrs. for 10 bar models and 8000 hrs. for 5.5kW and 7.5kW models• It is recommended to install air filters and an external receiver tank after the compressor.• Even with Class zero compressors, oil may be found in the piping. This may be caused by the presence of oil in the piping before installation of the compressor or by accident during the production process.
SLPE-551F and SLPE-751F coming soon.
*1 F.A.D. is measured at max working pressure.*2 Noise level measured at a distance of 1M according to ISO11201; tolerance±3dB*3-1 Except intake filter*3-2 5000 hrs. for 10 bar models• It is recommended to install air filters and an external receiver tank after the compressor.• Even with Class zero compressors, oil may be found in the piping. This may be caused by the presence of oil in the piping before installation of the compressor or by accident during the production process
Features• Multi Stage Control for energy conservation• Class Zero oilfree air• 10.000 hrs. maintenance free for 8 bar model*3
• IE3 premium efficiency motor• Touch panel for monitoring running conditions• Low noise level• Low vibration
8 bar models
10 bar models
Multi-stage Scroll Compressor
Multiplex Oilfree Scroll Compressors11 kW (15HP) - 30 kW (40HP)
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg Volt/Hz/Pha
SLPE-110E 11(3x3.7) 15
Pressuresensor
8 0.8
1211 73.0 59Rc 1 655x960x1555
365
400/50/3SLPE-150E 15(4x3.7) 20 1615 96.9 61 435
SLPE-220E 22(6x3.7) 30 2422 145 64Rc 1 1/4 1370×955×1555
745
SLPE-300E 30(8x3.7) 40 3230 194 67 885
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg Volt/Hz/Pha
SLPE-1101E 11(3x3.7) 15
Pressuresensor
10 1.0
1009 61.0 60Rc 1 655x960x1555
365
400/50/3SLPE-1501E 15(4x3.7) 20 1346 80.8 62 435
SLPE-2201E 22(6x3.7) 30 2018 121 66Rc 1 1/4 1370×955×1555
745
SLPE-3001E 30(8x3.7) 40 2692 162 65 885
1 Model SLPE Oilfree Scroll Compressor
2 Power
07 0,75kW / 1HP
15 1,5kW / 2HP
22 2,2kW / 3HP
37 3,7kW / 5HP
55 5,5kW / 7,5HP
75 7,5kW / 10HP
110 11kW / 15HP
150 15kW / 20HP
220 22kW / 30HP
300 30kW / 40HP
3 Max. Press.Blank 8 bar
1 10 bar
4 SeriesE E Series
F F Series
5 DryerBlank Without Dryer
D With Dryer
6 *1 PowerM Single phase, 230V/50Hz
T Three phase, 400V/50Hz
7Tank
(coming soon)
Blank Without tank
90 With 90L tank
270 With 270L tank
500 With 500L tank
1 2 3 4 5 6*1 7
SLPE - 22 1 E D - M - 270
*1 : Only 2,2kW model
LIST OF TECHNICAL SPECIFICATIONS8 bar models
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Tank capacity
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg L Volt/Hz/Pha
Standard
SLPE-07E0.75 1
Pressureswitch
8 0.8
70 4.249
Rc 3/8
335x590x690 50 5(internal) 230/50/1SLPE-07ED 60 3.6 335x660x690 52
SLPE-15E 1.5 2 155 9.3 54
535x685x745
80
-
SLPE-22E-T 2.2 3 243 14,6 56 85
400/50/3
SLPE-37E 3.7 5 404 24,2 59 105
SLPE-55F 5.5 7.5
Pressuresensor
596 35,8 55Rc 3/4 605x970x1195
205
SLPE-75F 7.5 10 808 48,5 57 210
SLPE-110E 11 15 1211 73,0 59Rc 1 655x960x1555
365
SLPE-150E 15 20 1615 96,9 61 435
SLPE-220E 22 30 2422 145 64Rc 1 1/4 1370×955×1555
745SLPE-300E 30 40 3230 194 67 885
w/TankSLPE-15E-90 1,5 2
Pressureswitch
8 0.8155 9,3 56
Rc 3/8 1120x600x1325145
90230/50/1
SLPE-22E-T-90 2,2 3 243 14,6 61 150400/50/3
SLPE-37E-90 3,7 5 404 24,2 59 165
w/Tank w/Dryer
SLPE-15ED-90 1,5 2Pressureswitch
8 0.8
155 9,3 57
Rc 3/8 1310x600x1325
185
90
230/50/1SLPE-22ED-T-90 2,2 3 243 14,6 63 190
400/50/3SLPE-37ED-90 3,7 5 404 24,2 60 205
10 bar models
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)Noise
Level (*2)Outlet
NetDimensions
(WxDxH)
NetWeight
Tank capacity
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg L Volt/Hz/Pha
Standard
SLPE-151E 1.5 2Pressureswitch
10 1.0
119 7,1 55
Rc 3/8 535x685x745
80
-
230/50/1
SLPE-221E-T 2.2 3 207 12,4 57 85
400/50/3
SLPE-371E 3.7 5 337 20,2 59 105
SLPE-1101E 11 15
Pressuresensor
1009 61,0 60Rc 1 655x960x1555
365
SLPE-1501E 15 20 1346 80,8 62 435
SLPE-2201E 22 30 2018 121 66Rc 1 1/4 1370x955x1555
745SLPE-3001E 30 40 2692 162 65 885
w/TankSLPE-151E-90 1,5 2
Pressureswitch
10 1.0119 7,1 58
Rc 3/8 1120x600x1325145
90230/50/1
SLPE-221E-T-90 2,2 3 207 12,4 57 150400/50/3
SLPE-371E-90 3,7 5 337 20,2 62 165
w/Tank w/Dryer
SLPE-151ED-90 1,5 2Pressureswitch
10 1.0
119 7,1 59
Rc 3/8 1310x600x1325
185
90
230/50/1SLPE-221ED-T-90 2,2 3 207 12,4 58 190
400/50/3SLPE-371ED-90 3,7 5 337 20,2 66 205
OILFREE RECIPROCATING TECHNOLOGYWe developed wide range of OILFREE RECIPROCATING COMPRESSORS in 1979 and keep improving the technologies since then along with our unique technical characteristics which are Composite Resin Piston and high pressure as well as high durability.
• Oilfree Air
• Composite resin piston
• Long maintenance interval (10,000 hrs.)
• Durability for continues workload
• Wide range (0,75kW to 11kW)
• 2 way cooling system (above 2,2kW)
• 2-stage for 14 bar (above 5,5kW)
FEATURES:
The composite resin pistonThe composite resin piston is made from a heat resistant and thermosetting resin.It has excellent anti-wear characteristics and can endure continuous use under high temperatures.It eliminated the need for a rider ring, which is essential to conventional OILFREE air compressors.This means you are free from seizure or galling, often found in the rider ring mechanism.The compression ring is made from Teflon resin which has high heat and anti-wear resistance properties.
Pressure ring
Conventional OILFREE piston
Pressure ring
Pressure ring
Rider ring
HP (two stage)LP (first stage)●■ ■
●Composit resin piston
TFPE SeriesThe oilfree models provide high-quality clean air.
• Food & Beverage• Dental & Medical• Pharmaceutical• Laboratory• Painting• Agriculture • Fiber industry• Others
APPLICATIONS
CleanAir from oil-lubricated compressors contains oil and can contaminate the piping. This does not happen with an Oilfree Scroll Compressor which produces high-quality oilfree air.
Drainage from anoilfree
compressor
Drainage from an
oil-lubricated compressor
INSIDE THE PIPING OF AN OIL-LUBRICATED COMPRESSOR
INSIDE THE PIPING OF AN OILFREE COMPRESSOR
ModelPower Operation
Control
Max. WorkingPressure
F.A.D. (*1)NoiseLevel (*2)
OutletNet
Dimensions(WxDxH)
NetWeight
Tank Capacity
Voltage
kW HP bar MPa L/min m3/h dB(A) size mm kg L Volt/Hz/Pha
TFPE-55E 5,5 7.5Pressureswitch
14 1.4
520 31.2 78
1” 1500x700x1300
300
270 400/50/3TFPE-75E 7,5 10 700 42.0 79 330
TFPE-110E 11 15 1020 61.2 82 400
OIL LUBRICATE COMPRESSORPREMIUM LINE
• Air Energy Control
• High efficiency Motor IE3
• High efficiency compression Unit
• Noise reduction
• Optimized separation system
• Efficient cooling system and ventilation
STANDARD LINE
• Easy Control
• High efficiency Motor IE3
• Encapsulated Air End
• Noise reduction
PREMIUM LINEScrew compressors 7,5 to 90kW | 8 - 13 bar
Model Power Flow rate m³/min Noise level
Compressed air out put
Dimensions Weight Tank capacity
Voltage
kW HP 8 bar 10 bar 13 bar dB (A) inch mm (WxDxH) kg L V/Hz/Ph
PREMIUM LINE
CAIRP-F-75 7,5 10 1,20 1,02 0,81 65 3/4" 930x690x1120 278
- 400/50/3
CAIRP-F-110 11 15 1,65 1,50 1,17 67 3/4" 930x690x1120 283
CAIRP-F-150 15 20 2,40 2,20 1,98 68 3/4" 1215x870x1300 288
CAIRP-F-185 18,5 25 2,86 2,52 2,02 66 1" 1215x870x1300 415
CAIRP-F-220 22 30 3,36 3,05 2,43 67 1" 1215x870x1300 435
CAIRP-F-300 30 40 4,78 4,11 3,72 65 1 1/4" 1500x1000x1450 707
CAIRP-F-370 37 50 5,67 5,12 4,46 65 1 1/4" 1500x1000x1450 715
CAIRP-F-450 45 60 6,85 6,19 5,53 65 1 1/4" 1500x1000x1450 778
CAIRP-F-550 55 75 9,10 8,15 7,40 73 1 1/2" 2200x1450x1990 1720
CAIRP-F-750 75 100 12,70 10,30 9,10 75 1 1/2" 2200x1450x1990 1820
CAIRP-F-900 90 125 13,70 13,00 11,80 75 1 1/2" 2200x1450x1990 1920
W/ DRYERW/ TANK
CAIRP-F-75-270 7,5 10 1,20 1,02 0,81 66 1/2" 2150x720x2070 480 270
400/50/3CAIRP-F-110-270 11 15 1,65 1,50 1,17 67 1/2" 2150x720x2070 485 270
CAIRP-F-75-500 7,5 10 1,20 1,02 0,81 67 1/2" 2150x720x2300 520 500
CAIRP-F-110-500 11 15 1,65 1,50 1,17 68 1/2" 2150x720x2300 525 500
W/ INVERTER
CAIRP-F-150 F 15 20 0,75 - 2,40 0,68 - 2,04 0,65 - 1,77 66 1" 1215x870x1300 500
- 400/50/3
CAIRP-F-185 F 18,5 25 0,82 - 2,90 0,78 - 2,54 0,75 - 2,12 66 1" 1215x900x1300 523
CAIRP-F-220 F 22 30 0,86 - 3,40 0,81 - 3,12 0,78 - 2,67 67 1" 1215x900x1300 543
CAIRP-F-300 F 30 40 1,72 - 4,90 1,62 - 4,37 1,43 - 3,77 65 1 1/4" 1500x1000x1450 963
CAIRP-F-370 F 37 50 2,14 - 6,09 1,94 - 5,53 1,83 - 4,80 65 1 1/4" 1500x1000x1450 971
CAIRP-F-450 F 45 60 2,60 - 7,40 2,40 - 6,50 2,10 - 5,50 65 1 1/4" 1500x1000x1450 1033
CAIRP-F-550 F 55 75 2,56 - 9,10 2,95 - 8,15 3,47 - 7,40 66 1 1/2" 2200x1450x1990 1700
CAIRP-F-750 F 75 100 3,60 - 12,70 3,70- 10,30 4,20 - 9,10 66 1 1/2" 2200x1450x1990 1850
CAIRP-F-900 F 90 125 3,60 - 13,70 3,70 - 13,00 4,20 - 11,80 67 1 1/2" 2200x1450x1990 1950
CAIRP-F-75 CAIRP-F-300
STANDARD LINEScrew compressors 4 to 75kW | 8 - 13 bar
Model Power Flow rate m³/min Noise level
Compressed air out put
Dimensions Weight Tank capacity
Voltage
kW HP 8 bar 10 bar 13 bar dB (A) inch mm (WxDxH) kg L V/Hz/Ph
STANDARD
CAIR-F-40 4 5 0,56 0,45 0,40 65 1/2" 820x540x750 138
- 400/50/3
CAIR-F-55 5,5 7,5 0,82 0,72 0,64 66 1/2" 820x540x750 143
CAIR-F-75 7,5 10 0,95 0,86 0,69 67 1/2" 820x540x750 148
CAIR-F-110 11 15 1,56 1,43 1,21 65 3/4" 940x630x850 254
CAIR-F-150 15 20 2,01 1,90 1,67 67 3/4" 940x630x850 280
CAIR-F-185 18,5 25 2,70 2,50 2,20 73 1" 950x850x1180 468
CAIR-F-220 22 30 3,28 2,97 2,39 74 1" 950x850x1180 498
CAIR-F-300 30 40 4,50 3,90 3,50 74 1" 1200x890x1350 679
CAIR-F-370 37 50 5,35 5,00 4,20 75 1" 1200x890x1350 700
CAIR-F-550 55 75 8,00 7,90 7,00 74 1 1/4" 1680x1285x1640 1230
CAIR-F-750 75 100 11,50 10,00 9,00 76 1 1/4" 1680x1285x1640 1350
W/ TANK
CAIR-F-40-270 4 5 0,56 0,45 0,40 65 1/2" 1525x540x1225 245 270
400/50/3
CAIR-F-55-270 5,5 7,5 0,82 0,72 0,64 66 1/2" 1625x540x1250 252 270
CAIR-F-55-500 5,5 7,5 0,82 0,72 0,64 66 3/4" 1625x540x1250 295 500
CAIR-F-75-270 7,5 10 0,95 0,86 0,69 67 1/2" 1625x540x1250 257 270
CAIR-F-75-500 7,5 10 0,95 0,86 0,69 67 1/2" 2040x540x1460 300 500
CAIR-F-110-270 11 15 1,56 1,43 1,21 65 3/4" 1625x630x1300 365 270
CAIR-F-110-500 11 15 1,56 1,43 1,21 65 3/4" 2040x630x1430 390 500
CAIR-F-150-270 15 20 2,01 1,90 1,67 67 3/4" 1625x630x1300 392 270
CAIR-F-150-500 15 20 2,01 1,90 1,67 67 3/4" 2040x630x1430 438 500
CAIR-F-185-500 18,5 25 2,70 2,50 2,20 73 1" 2040x850x1770 670 500
CAIR-F-220-500 22 30 3,28 2,97 2,39 74 1" 2040x850x1770 700 500
W/ INVERTERCAIR-F-110 F 11 15 0,32 - 1,56 0,30 - 1,43 0,26 - 1,21 65 3/4" 1100x730x935 280 - 400/50/3
CAIR-F-150 F 15 20 0,34 - 2,01 0,32 - 1,90 0,28 - 1,67 67 3/4" 1100x730x935 310 - 400/50/3
W/ INVERTERW/ TANK
CAIR-F-110-500 F 11 15 0,32 - 1,56 0,30 - 1,43 0,26 - 1,21 65 3/4" 2040x730x1540 430 500 400/50/3
CAIR-F-150-500 F 15 20 0,34 - 2,01 0,32 - 1,90 0,28 - 1,67 67 3/4" 2040x730x1540 575 500 400/50/3
CAIR-F-40 CAIR-F-40 - 270
Piston compressors
Model Power Max. Working Pressure
Flow rate Noise level Dimensions Weight Tank capacity Voltage
kW HP bar l/min dB (A) mm (WxDxH) kg L V/Hz/Ph
MOBILE
AI-MLK 250-24-230 1,7 2,2 10 121 72 740 x 320 x 660 37 24 230/50/1
AI-MLK 350-50-230 2,2 3 10 155 74 740 x 320 x 660 39 50 230/50/1
AI-MLK 350-50-400 2,2 3 10 155 74 1010 x 338 x 690 55 50 400/50/3
AI-MLK 520-90-400 3 4 10 400 71 1220 x 510 x 107 130 90 400/50/3
AI-MLK 600-90-400 4 5,5 10 448 75 1220 x 510 x 107 130 90 400/50/3
AI-MBK 360-2x9,5-230 2,2 3 10 135 77 770 x 610 x 510 50 19 230/50/1
AI-MBK 360-20-230 2,2 3 10 135 77 520 x 430 x 790 45 20 230/50/1
AI-MBK 830-2x17-400 5,5 7,5 10 592 77 750 x 585 x 790 135 34 400/50/3
AI-MSK 350-90-230 2,2 3 10 155 74 510 x 510 x 1150 55 90 230/50/1
AI-MLK 422-270-400 14b 3 4 14 293 71 1600 x 560 x 1040 145 270 400/50/3
LYING
AI-LK 600-270 4 5,5 10 448 75 1600 x 560 x 1040 143 270
400/50/3
AI-LK 600-500 4 5,5 10 448 75 1970 x 590 x 1300 205 500
AI-LK 830-270 5,5 7,5 10 592 76 1600 x 560 x 1040 150 270
AI-LK 830-500 5,5 7,5 10 592 76 1970 x 590 x 1300 255 500
AI-LK 1080-270 YD 7,5 10 10 860 77 1600 x 560 x 1040 165 270
AI-LK 1080-500 YD 7,5 10 10 860 77 1970 x 590 x 1300 270 500
AI-LK 1200-500 4 + 4 5.5 + 5.5 10 896 77 2050 x 590 x 1170 425 500
AI-LK 1660-500 5,5 + 5,5 7.5 + 7.5 10 1184 78 2050 x 590 x 1170 517 500
STANDING
AI-SK 540-270 3 4 10 386 76 670 x 670 x 1850 155 270
400/50/3AI-SK 650-270 4 5,5 10 491 74 670 x 670 x 1850 180 270
AI-SK 830-270 5,5 7,5 10 592 76 670 x 670 x 1850 200 270
HIGH PRESSURE
AI-LK 465-270 14b 4 5,5 14 326 73 1600 x 560 x 1040 150 270
400/50/3AI-LK 730-270 14b 5,5 7,5 14 455 75 1600 x 560 x 1040 152 270
AI-LK 730-500 14b 5,5 7,5 14 455 76 1970 x 590 x 1300 260 500
AI-LK 820-500 YD 14b 7,5 10 14 567 76 1970 x 590 x 1300 270 500
SILENT
AI-LKS 600-270 4 5,5 10 448 69 1612 x 599 x 1264 215 270
400/50/3
AI-LKS 830-270 5,5 7,5 10 592 66 1612 x 599 x 1264 230 270
AI-LKS 830-500 5,5 7,5 10 592 66 2038 x 600 x 1357 305 500
AI-LKS 1070-270 YD 7,5 10 10 785 66 1612 x 599 x 1264 250 270
AI-LKS 1070-500 YD 7,5 10 10 785 66 2038 x 600 x 1357 325 500
AI-KS 400 2,2 3 10 248 68 864 x 591 x 745 115 -
AI-KS 540 3 4 10 386 68 864 x 591 x 745 125 -
AI-KS 600 4 5,5 10 448 69 864 x 591 x 745 160 -
AI-KS 830 5,5 7,5 10 592 66 864 x 591 x 745 170 -
AI-KS 1070 YD 7,5 10 10 785 65 864 x 591 x 745 170 -
BASE COMPRESSORS
AI-K 650 4 5,5 10 491 74 750 x 400 x 590 70 -
400/50/3AI-K 830 5,5 7,5 10 582 75 890 x 456 x 730 75 -
AI-K 1050 YD 7,5 10 10 860 77 1050 x 560 x 660 95 -
AI-K 1400 YD 11 15 10 1110 78 1050 x 460 x 660 95 -
AI-KS 400 AI-LKS 830-270 AI-SK 540-270 AI-MBK 360-2x9,5-230
Air Compressor Accessories
Use of Refrigerated Air Dryers allowsfor the best performance of our oilfreescroll compressors. These unitsincorporate an electronic controlto monitor all functions.A hot gas bypass valve avoidsthe formation of ice in the dryer.The vertical flow layout allowsfor easy access to the drain valve.
AID-6 / AC
AID-12 / AC
• Data refers to the following nominal conditions: ambient temperature of 25°C, with inlet air 7 bar and 35°C, and 5°C pressure dew point (-20.5°C atmospheric pressure dew point).• Max. working conditions: ambient temperature 45°C, inlet air temperature 55°C and inlet air pressure 14 bar (16 bar for AID-3 to AID-18).• It is recommended to install an air filter before the inlet.
Model name Part no.
Compressorcombination
Max. air flow OutletDimension(WxDxH)
Weight Voltage
kW HP L/min size mm kg Volt/Hz/Phase
AID-3/AC AID003GP1J000 3 4 350 G3/8 310x345x435 21
230/50/single230/60/single
AID-6/AC AID006GP1J000 4 5.5 600 G1/2 370x515x475 25
AID-9/AC AID009GP1J000 5.5 7.5 950 G1/2 370x515x475 26
AID-12/AC AID012GP1J000 7.5 10 1.200 G1/2 370x515x475 28
AID-18/AC AID018GP1J000 11 15 1.800 G1/2 370x515x475 32
AID-25/AC AID025GP1J005 15 20 2.500 G1 345x420x740 34
AID-32/AC AID032AP1J005 18.5 25 3.200 G1-1/4 345x445x740 39
230/50/single
AID-43/AC AID043AP1J004 22 30 4.300 G1-1/4 345x445x740 40
AID-52/AC AID052AP1J004 22+ 30+ 5.200 G1-1/4 485x455x825 41
AID-61/AC AID061AP1J004 30 40 6.100 G1-1/2 555x580x885 54
AID-75/AC AID075AP1J003 37 50 7.500 G1-1/2 555x580x885 56
AID-105/AC AID105AP1J004 55 75 10.500 G2 555x625x975 94
AID-130/AC AID130AP1J004 55+ 75+ 13.000 G2 555x625x975 96
AID-168/AC AID168AP1J002 90 120 16.800 G2-1/2 665x725x1105 144
Refrigerated Air Dryer
Air Compressor Accessories
Air Receiver Tank (Vertical)
Model nameMax. working
pressureCapacity Connection Weight Dimension
MPa bar Liter in-out kg WxDxH (mm)
87FY000
1.1 11
100 G3/8-3/4 37 370x370x1156
87LY000 200
G3/8-1
62 446x446x1554
87NY000 270 80 500x500x1648
87TY000 500 135 600x600x2050
*equipped with safety valve, pressure gauge, air release valve and drain valve
Auto Drain
*recommended electric cable is 3X 0.75mm 2
Model name
Max. working pressure
ConnectionElectricity
Weight Dimension
MPa bar in-out outlet(hose size) kg WxDxH (mm)
BEKOMAT32 1.6 16 G1/2 G½(φ8-10) 230V/50-60HZ 1.0 179x74x115
Air Regulator
*equipped with pressure gauge
Model name
max.working pressure
Settingpressure range
Connection Weight Dimension
MPa bar MPa bar in-out kg WxDxH (mm)
R6000-20G-W 1.0 10 0.05 to 0.85 0.5-8.5 G3/4 1 90x90x151
Air Filter with Auto Drain
Model nameMax. working
pressureFiltrating Connection Weight Dimension
MPa bar μm in-out kg WxDxH (mm)
F4000-10G-WF1Z
1.0 10
5μ
G3/8* 0.45 80x79x171F4000-10G-WF1Y 0.3μ
M4000-10G-W-F1M 0.01μ
*also available with other connection sizes from 1/8 to 1 inch
Dimensions
Single phase
Dimensions
Three phase
(38)
Dimensions
(37)
Dimensions
Dimensions
InletNW25
OutletNW16
Air flush port
31715551
118
80.5
179
50 75
90 11015
4-φ 9140
227
OIL FREE SCROLL VACUUM PUMP
ISP-50
ISP-90
ISP-250C
ISP-500C
ISP-1000E
Single Phase Motor Three Phase Motor Vertical Inlet Horizontal Inlet RoHS Conformity CSA Conformity CE Conformity
● Ultimate pressure is measured as total pressure. Noise is measured in an anechoic room.
Oil free scroll vacuum pump
Air Flush Air FlushPurpose of Air FlushPumping of humid gas by vacuum pump can cause condensed moisture to remain in pump. This remaining moisture can cause failure to ultimate pressure or pump. Air Flush operation is necessary to remove remaining moisture inside. Air Flush operation also recovers ultimate pressure.
Pumping Speed of vacuum pump
Single phaseHorizontal Inlet
Three phaseVertical Inlet
How to select
Synchrotron FacilityEvacuation units for beamlines in Synchrotron and Accelerator Facilities
High Vacuum Pumping SystemRoughing pump for Turbo Molecular Pump and Mechanical Booster Pump
Applications
Sputtering equipment, Vacuum deposition equipment, Ion plating equipmentGas recovery devicesVacuum equipmentLeak detectorsDevice handling system
Surface modification, Electron beam processVacuum furnace, Heat treatment furnaceLaboratory useVacuum packaging machineOthers
Pumping speed
)nim/L
( deepS gnipmuP
101 102 103 104 105555555
Inlet Pressure (Pa)
10-2 10-110-3 100
10-1 100
102 103101 555555
(Torr)
100
1000
10
1
100
1000
10
1
ISP-50
(with thermal protector)
L/min50/60HzPa50/60Hz
kW
Pa・m /s
g/day
L/min
NW
NW
�
V
kg
dB(A)
Pumping Speed
Ultimate pressure
Motor power
Voltage
Noise level
Weight
Leak tightness
Water Vapor Capacity
Air flush
Inlet connection
Outlet connection
Cooling system
Ambient temperature
Trade name
Model
Single phaseThree phase
Single phase
Three phase
air-cooled
5~40
The model name of ISP-1000 is ISP-1000-TVA/THA, ISP-50 is change to ISP-50-SV1; single phase 100V, ISP-50-SV2; single phase 200V
Trade name Oilfree Scroll Vacuum Pump
Model ISP-50 ISP-90 ISP-250C ISP-500C ISP-1000E
Pumping speed (50 Hz)L/min 50 90 250 500 1000
m3/h 3,0 5,4 15,0 30,0 60,0
Ultimate pressure (50Hz)≦ Pa 20 5 1,6 1 1
≦ mbar 2,0 ×10-1 5,0 ×10-2 1,6 ×10-2 1,0 ×10-2 1,0 ×10-2
Motor power kW 0,1 0,15 0,4 0,6 1,4
Voltage V
Singie phase
AC100V, AC200V, AC 230V 100,115,200,230 (with thermal protector) -
Threephase
- - 200,208,230,380,450,460
Noise level dB(A) 48 (at air �ush 57) 52 (at air �ush 57) 58 (at air �ush 66) 60 (at air �ush 68) 67 (at air �ush 74)
Weight Kg
Singie phase
12 14 25 44 -
Threephase
- - 23 38 56
Leak tightness Pa • m3/s ≦ 1 x 10-7 ≦ 1 x 10-5
Water Vapor Capacity g/day 3 (at air �ush) 5 (at air �ush) 25 (at air �ush)
Air �ush L/min 4 9 10
Inlet connection NW 25 40
Outlet connection NW 16 25 40
Cooling system air-cooled
Ambient temperature °C 5~40 10~40
Introducing the HC model with increased durability in DVSL series!
It lasts three-times longer than the standard model, thanks to the specialized fi nishing which
is applied to the sliding surface.It is highly recommended to end-users
who process water vapor frequently.
• Numbers and values are comparison to our current products and reference only. Results are varied depending upon application and condition of use.
Single Phase Motor Three Phase Motor RoHS Conformity CSA Conformity CE Conformity
DVSL-100C
DVSL-500E/501E
Single Phase Motor
RoHS Conformity
CSA Conformity
CE Conformity
Three Phase Motor
RoHS Conformity
CSA Conformity
CE Conformity
Three Phase Motor
RoHS Conformity
CE Conformity
Three Phase Motor
RoHS Conformity
CE Conformity
DVSL-501E-HC
DVSL-1002E
Product dimensions are the same as the DVSL-501C.
DRY SCROLL VACUUM PUMP
DVSLシリーズに高耐久仕様が登場!特殊表面処理の採用により、シール摺動面の耐久性が従来品と比較して※3倍長持ち!特に蒸気排気の多いお客様にお奨めです。
※数値は当社従来品との比較による参考値です。結果はお客様のご使用条件、用途により異なります。※Numbers and values are comparison to our current products and reference only. Results are varied depending upon application and condition of use.
Introducing the HC model with increased durability in DVSL series!It lasts three-times longer than the standard model, thanks to the specialized finishing which is applied to the sliding surface.It is highly recommended to end-users who process water vapor frequently.
■外形寸法はDVSL-501Cと同じです。■Product dimensions are the same as the DVSL-501C.
■ Structure
最適にやさしくメンテナンスが簡単ダイヤフラムより強くて速いも簡単
付きも選べます
■Principle of compression
Vacuum Chuck
Vacuum Transport
Vacuum Forming
Cryopump Regeneration
Leak Test
Roughing for TMP
Deaerator
Gas Substitution
Vacuum Drying
Vacuum Packing
■配管部品 ■Plumbing parts
接続口径NW16~40クランプ・センターリング・フレキシブルチューブ・エルボ・ティー・クロス・レジューサー・ブランクConnection diameter:NW16~40Clamp, Center ring, Flexible tube, Elbow, Tees, Cross, Reducer, Blank
■真空チャンバー ■Vacuum Chamber
気体の脈動防止・補助タンクとして多用途に20L(接続口径NW25)35L(接続口径NW40)For various purposes for the prevention of gas pulsation and auxiliary tank.20L(connection diameter:NW25)30L(connection diameter:NW40)
intenance.
吸込口フランジ(NW)、水分離サイレンサーはオプションです。Inlet flange andwater separator areavailable as an option.
DVSL-100C ■ Application
■関連商品 ■Related Items
DVSL-500C/501C
DVSL-1002C
VTU-080-LH GVS-250/500B/501B
single-phase RoHS対応 CSA対応three-phase CE対応
Trade name
Model形 式Model
スクロールポンプForeline Pump(scroll)
ターボ分子ポンプTurbo molecular pump(TMP)
到達圧力 Ultimate pressure
電源電圧Voltage
外形寸法(W×L×H)Dimentions
オプションOptional parts
DVSL-100C
100/120
≦50
0.3
100,115,200,230
-
≦62 (at air flush65)
15
-
100 (at air flush)
5 (at air flush)
NW25(with Rc 3/8)
NW16(with Exhaust valve)
VTU-080-LH
ISP-90
SL80 (エリコンライボルト株式会社)
10-5台(No baking)
1Ф AC100V、200V
235×436×474
自動バルブなどIsoration valve etc.
Pa
V
mm
Displacement
Ultimate pressure
Motor power
Voltage
Noise level
Weight
Water vapor
Air flush
Inlet connection
Outlet connectionCooling system
Ambient temperature
Back-up material
GVS-500BGVS-250 GVS-501B
air-cooled
5~40
L/min50/60Hz
kW50/60Hz
VSingie phase
Three-phase
Singie phase
Three-phase
Pa
dB(A)
g/day
L/min
NW
NW
℃
kg
Fluorine rubber Silicon rubber Fluorine rubber Silicon rubber
DVSL-1002C
845/1010
≦30
2.4
-
200,220
≦69(at air flush74)
-
118
500(at air flush)
20(at air flush)
Rc1
形 式Model
設計排気速度Displacement
到達圧力Ultimate pressure
排気口径Outlet connection
吸気口径Inlet connection
騒音値Noise level
L/min50/60Hz
Pa
シリコンゴムSilicon rubber
フッ素ゴムFluorine rubber
Rc 1/2
Rc1
V
単相Singie phase
三相Three-phase
423/ 505
≦500
-
200,220
≦64
208/ 255
≦750
100,115
-
≦61
電圧voltage
バックアップ材Back-up material
1φ
1φ
3φ
3φ
3φ
DVSL-501C-HC
大気~真空の繰り返しと蒸気排気に強い
DVSL-500C
≦30
≦64 (at air flush69)
430/520
0.9/1.1
-
200,208,230,380,400,415,460
-
36
250(at air flush)
10(at air flush)
NW25(with Rc 1/2)
DVSL-501C・DVSL-501C-HC
NW25(with Exhaust valve)
Oil-free Scroll Vacuum Pump
dB(A)
≦100
≦64 (at air flush69)
NEW
3φ
No.1 No.2
No.4 No.3
Intake cycle completed Position No.1
Position No.2Position No.3
Inlet
Fixed scroll
Gas pocket
Inlet
Outlet
Orbiting scroll
DRY SCROLL VACUUM PUMPExcellence in continuous operation between
atmosphere and vacuum and in displacing water vapor.
As the orbiting scroll orbits as shown in the illustration from No.1 position to No.4 position, crescent shaped gas pockets are gradually reduced. At the last stage, compressed gas is exhausted through the center port.
Pumping of humid gas by vacuum pump can cause condensed moisture to remain in pump.
This remaining moisture can cause failure to ultimate pressure or pump.
Air Flush operation is necessary to pump remaining moisture inside the pump.
Air Flush operation dose not only pump remaining moisture but also recovers ultimate pressure.
• Pumping speed of DVSL-501C-HC is the same as the DVSL-501C.
Structure
Air Flush
Purpose of Air Flush
Specifi cations Pumping speedTrade name Oilfree Scroll Vacuum Pump
Model DVSL-100C DVSL-500E DVSL-501E DVSL-1002E
Pumping speed (50 Hz)
L/min 100 430 430 845
m3/h 6,0 25,8 25,8 50,7
Ultimate pressure (50Hz)
≦ Pa 50 30 100 30
≦ mbar 5,0 ×10-1 3,0 ×10-1 1,0 ×10-0 3,0 ×10-1
Motor power kW 0,3 0,9 0,9 2,4
Voltage VSingie phase 100,115,200,230 - - -
Three-phase - 200,208,230,380,400,415,460 200,220
Noise level dB(A) ≦ 62 (at air � ush 65) ≦ 64 (at air � ush 69) ≦ 69 (at air � ush 74)
Weight KgSingie phase 15 - -
Three-phase - 36 118
Water vapor g/day 100 (at air � ush) 250 (at air � ush) 500 (at air � ush)
Air � ush L/min 5 (at air � ush) 10 (at air � ush) 20 (at air � ush)
Inlet connection NW NW25 (with Rc 3/8) NW25 (with Rc 1/2) Rc 1
Outlet connection NW NW16 (with Exhaust valve) NW25 (with Exhaust valve)
Cooling system air-cooled
Ambient temperature °C 5~40
Back-up material Fluorine rubber Silicon rubber Fluorine rubber Silicon rubber
01
03
05
07
02
04
06
08
VACUUM EQUIPMENT APPLICATIONS
Vacuum equipment of Anest Iwataare utilized in various applications.
Pick and Place [DVSL]
Medical [ISP/DVSL]
Vacuum-freeze drying [DVSL]
Vacuum impregnation [DVSL]
Vacuum Chuck [DVSL]
Vacuum drying [DVSL]
Vacuum heat insulation [DVSL]
Vacuum Forming [DVSL]
Conveying workpiece andutilizing a pressure difference with suction pad.
Used for variousapplications. Cancertherapy system,Sterilization and aspiratorin the hospital etc.
Sublimating frozen workunder vacuum pressure.For example ... instantcoffee, dry food, etc.
Penetrating the seasoningto groceries usinga vacuum pressure.The mechanicalcomponents are utilizedto infiltrate the adhesive.
Chucking a workpieceby pressure difference.Suitable for distortedsurface, soft, thin film and small objects.
Removing unnecessary components form the work(workpiece) using vacuum pressure.It is used for delicate material againstheating and complex shape.For example ... Removing washingwater from mechanical parts, Removing absorbed water molecular from resin pellets, and centrifugal system forchemicals etc.
Vacuum is suitable forheat-insulation as itdoesn’t cause heatconduction.For example ... Vacuumheat insulation sheet,thermos etc.
Using a vacuum pressureto the molding resinmaterials.
09
11
13
15
17
10
12
14
16
18
Degassing [DVSL]
Gas recovery devices [ISP/DVSL]
Leak detectors [ISP/DVSL]
Vacuum heat treatment [ISP]
Evapolation deposition [ISP]
Vacuum packaging [DVSL]
Exhaust gas inspection [ISP]
Electron microscope [ISP]
Sputtering [ISP]
Accelerator • Synchrotron [ISP]
Contained gases aresucked from the materialusing a vacuumpressure.
Make it easier to fill the gasto the container which isunder vacuum pressure.It is also used to recover thegases, which are the rare gasand the effective gas to theenvironment (ISP series).
Checking the leakageof containers by pressurechange during the certaintime under the vacuumpressure.Leak tight pump is neededfor Helium leak tester toprevent the influence ofbackground (ISP series).
Preventing the oxidationand removing absorbedgas for heat treatmentunder the vacuumpressure.
Deposit metal on a surfaceby heating a target invacuum chamber.
Sucking the air fromthe sealed bag to preventdeterioration of the foodand workpiece.
It is used for the inspectionof particulatecontained in the exhaustgas of automobiles.
The vacuum pressure isneeded in the chamberwhen the sample isscanned by shot electronbeam.
Deposit metal ona surface by using fastions to eject particles outof it from a target.
By creating clean vacuumcondition, we aresupporting world’scutting-edgetechnologies such asaccelerator and particlephysics.
He
Distributed by:
ANEST IWATA GLOBAL NETWORK
AI Brasil
AI U.S. AI Sweden AI Russia AI China
AI South Korea
AI CORPORATIONJapan
(Head Office)
AI India
AI Australia
AI Myanmar
AI Indonesia
AI Thailand
AI Vietnam
AI Taiwan
AI Germany
AI U.K.AI France
AI Spain
AI Italy
AI South Africa AI U.A.E.
AI Poland
ANEST IWATA EUROPE GmbHAm Stahlbügel 2 - D-74206 Bad Wimpfen - GermanyTel.+49 (0) 7036-933 670 - Fax +49 (0) 7063-933 [email protected] - www.anest-iwataairtech.com
Headquarters in Japan:ANEST IWATA Corporation3176, Shinyoshida-cho, Kohoku-ku,Yokohama 223-8501, [email protected]