Catalogue 2014 - audioeffetti.com 2014 dB.pdf · HPA 1000 Amplifier 102 HPA 1400 Amplifier 102 HPA 2800 Amplifier 102 ... 200+200W RMS DIGIPRO® G3 CLASS-D AMPLIFIER (800W …

Catalogue 2014

Catalogue 2014

DVA SeriesDVA M2M + M2S Active Line Array Module 6DVA MS12 Active Subwoofer 10

DVA T12 Active Line Array Module 12DVA T8 Active Line Array Module 16DVA T4 Active Line Array Module 22DVA S30 N Active Subwoofer 28DVA S1521 N Active Subwoofer 29DVA S1518 N Active Subwoofer 30DVA S2585 N Active Subwoofer 31DVA S20 DP Active Subwoofer 32DVA S10 DP Active Subwoofer 33DVA S09 DP Active Subwoofer 34DVA S08 Active Subwoofer 35DRK 20M Motorized Flybar 36DVA Accessories 37

OPERA BLACK LINE SeriesOPERA 710 BL Active Speaker 60OPERA 712 BL Active Speaker 60OPERA 715 BL Active Speaker 60OPERA 910 BL Active Speaker 61OPERA 912 BL Active Speaker 61OPERA 915 BL Active Speaker 61

FLEXSYS SeriesFLEXSYS F8 Active Speaker 53FLEXSYS F10 Active Speaker 53FLEXSYS F12 Active Speaker 54FLEXSYS F15 Active Speaker 54FLEXSYS F212 Active Speaker 55FLEXSYS F315 Active Speaker 55FLEXSYS FM8 Active Stage Monitor 56FLEXSYS FM10 Active Stage Monitor 57FLEXSYS FM12 Active Stage Monitor 57

SIGMA SeriesSIGMA S215 Active Speaker 49SIGMA S115 Active Speaker 50SIGMA S118 Active Subwoofer 51

DVX SeriesDVX DM12 TH Active Stage Monitor 40DVX DM15 TH Active Stage Monitor 40

DVX D8 HP Active Speaker 44DVX D10 HP Active Speaker 44DVX D12 HP Active Speaker 45DVX D15 HP Active Speaker 45DVX DM28 Active Stage Monitor 46DVX DM12 Active Stage Monitor 47DVX DM15 Active Stage Monitor 47

OPERA DX SeriesOPERA 508 DX Active Speaker 64OPERA 510 DX Active Speaker 64OPERA 512 DX Active Speaker 65OPERA 515 DX Active Speaker 65

Product Index

The sound of experience.AEB, the ACOUSTIC ENGINEERING BUREAU, has its headquarters in the outskirts of Bologna, which today is one of the most industrialized areas in Italy.

AEB has been designing and manufacturing electronic and electro acoustic products for the professional audio world for over 25 years under its trademark dBTechnologies.

Over the years, dBTechnologies products have gained substantial recognition for their technological innovations, as well as their inherent standard of quality.

Years of continuous significant investments in design, R&D and manufacturing technologies have made their mark on the industry.

AEB’s ability to develop innovative products, in a remarkably short time to market is the key ingredient for an ever-increasing market share and success.

Professional power amplifiers, active loudspeakers and audio mixers complete the comprehensive line of products developed and produced in our extensive facilities.

It came naturally to AEB, that in the continuous quest to improve

interrelated performance between the various components in active speaker systems, AEB is now also designing and manufacturing most of the speaker components used in its enclosures.

This process allows us to optimize and match the performance of the electronic components to the electro acoustic transducers. A further mark of distinction of dBTechnologies products is the major emphasis given to details and design.

dBTechnologies aim is to provide the audio professional, as well as musicians and sound designers, with products that combine high performance with world renowned Italian flair and design.

With the cooperation between Italy’s finest designers it has been possible to develop truly elegant loudspeakers, which make their own significant contribution to a magnificent stage setting.

OPERA DX SeriesOPERA 710 DX Active Speaker 66OPERA 712 DX Active Speaker 67OPERA 715 DX Active Speaker 67OPERA 910 DX Active Speaker 68OPERA 912 DX Active Speaker 69OPERA 915 DX Active Speaker 69

OPERA POPERA P15 Passive Speaker 100

SUB SeriesSUB 15H Active Subwoofer 76SUB 18H Active Subwoofer 77

SUB 28D Active Subwoofer 78SUB 12D Active Subwoofer 79SUB 05D Active Subwoofer 80SUB 808D Active Subwoofer 81SUB 15D Active Subwoofer 82SUB 18D Active Subwoofer 83

ARENA SeriesARENA 8 Passive Speaker 92ARENA 10 Passive Speaker 92ARENA 12 Passive Speaker 93ARENA 15 Passive Speaker 93ARENA SW15 Passive Subwoofer 94ARENA SW18 Passive Subwoofer 95ARENA 8 PRO Passive Speaker 96ARENA 10 PRO Passive Speaker 96ARENA 12 PRO Passive Speaker 97ARENA 15 PRO Passive Speaker 97ARENA SW15 PRO Passive Subwoofer 98ARENA SW18 PRO Passive Subwoofer 99

CROMO+ SeriesCROMO 8+ Active Speaker 71CROMO 10+ Active Speaker 72CROMO 12Club Active Speaker 72CROMO 12+ Active Speaker 73CROMO 15+ Active Speaker 73

MINIBOX SeriesMINIBOX L160D Active Speaker 87MINIBOX K300 Active Speaker 88MINIBOX K70 Active Speaker 89MINIBOX K162 Active Speaker 89

CONTROLLER & AMPLIFIERAC26N Controller 101HPA 1000 Amplifier 102HPA 1400 Amplifier 102HPA 2800 Amplifier 102HPA 3100L Amplifier 102

READY 4READY 4 Mobile Active Speaker 85

M2M / M2S

SUB 15 H / 18 H

DM12 TH / DM15 TH

MS12

p.6

p.40

p.10

p.76

p.85

Digital Array System & Subs

4 DVA Digital Array Systems & Subs

DVA M2MDVA M2SDVA MS12DVA T12DVA T8DVA T4DVA S30NDVA S1521NDVA S1518NDVA S2585NDVA S20 DPDVA S10 DPDVA S09 DPDVA S08DRK 20M

Digital Array Systems & Subs

Digital Array Systems & Sub

Line array technology has revolutionized sound reinforcement, particularly for large venues and events. Arraying several speaker cabinets vertically is a far more effective method of delivering and directing sound. Line array’s signal levels do not drop off as steeply with increasing distance as is the case with conventional systems. What‘s more, their patterns of throw are very wide despite the systems’ lean configurations. Until recently this technology saw limited use mainly in large, elaborate, and costly projects and installations. But with arrival of DVA, true line array technology is now available for a wide range of portable and permanent sound reinforcement applications.

Factoring all the many different parameters and users’ needs into the design equation, the dBTechnologies team of engineers developed a line array system that is easy to configure, exceedingly light, and tremendously versatile. What‘s more, the managed to take all these vital criteria into account without imposing limits on curving capacity and the number of arrayed components. Called DVA, this system makes the most of line array technology’s considerable audio benefits.

¢ Fully powered units, freely scalable to setups of any size.

¢ None of the impedance and amp channel availability concerns associated with passive models.

¢ Lossless signal path with no need for speaker cables.

¢ Extremely tough yet remarkably light enclosures.

¢ Digital controller (DSP) onboard for utmost operating safety.

Leveraging state-of-the-art technologies, materials, and many years experience developing powered speaker systems, dBTechnologies has turned up a line array series that raises the performance bar for handling, versatility, and return on investment.

dBTechnologies has a competitive edge. Our engineers’ deep insight into power electronics, DSP programming, acoustics, mechanics, materials, and manufacturing practices enables us to independently develop innovative solutions in each of these areas. Such comprehensive R&D proficiency puts us in a unique position: We are able to transform inspired ideas into premium-quality products that deliver outstanding performance at an unrivalled price-point.

The DVA series stands as a shining example of this all-around ability. Nowhere are the benefits of integrated amps, active crossovers, and processor-driven control more apparent than in DVA three-way line array units.

5DVA Digital Array Systems & Subs

Digital Array Systems & Subs


M2M

M2SFull of Technology

2-WAY ACTIVE LINE ARRAY SYSTEM

INTEGRATED HARDWARE WITH INNOVATIVE FAST LOCK MECHANICS

LIGHTWEIGHT AND ELEGANT PREMIUM DESIGN

DUAL PHASE PLUG DESIGN FOR AN EXTREMELY PRECISE DISPERSION

200+200W RMS DIGIPRO® G3 CLASS-D AMPLIFIER (800W PEAK POWER)

SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE

HI END DIGITAL CONTROLLER ON BOARD (DSP)

INNOVATIVE MASTER AND SLAVE CONCEPT

LIGHTWEIGHT NEODYMIUM MAGNETS FOR ALL TRANSDUCERS

Remember the DVA T8 launch? As hard as it was to believe, all that power

and performance came packed in an incredibly compact, lightweight

speaker. Now the DVA MINI is about to set a new standard (again).

Offering the same hallmark user-friendliness and sound quality of its DVA

predecessors, the MINI series sets the new benchmark for easy-to-use

systems with top-range sound performance.

The innovative Master + Slave design makes for simplified system wiring

and less total weight, making this series equally ideal for permanent

installation in theatres, places of worship, convention centres, and for

concert tours and live music performances.

Master + SlaveA unique perfect system


DVA M2MTechnical DataSpeaker Type: 2-Way Active Master Line Array Module

Acoustical dataFrequency Response [- 6dB]: 90 - 19.000 HzFrequency Response [- 10dB]: 80 - 20.000 HzMax SPL: One Unit: 126 dBHF: 2x1”Type HF: NeodymiumVoice Coil HF: 1”LF: 2x6.5”Type LF: NeodymiumVoice Coil LF: 1.5”Directivity: 100x20° Single unit

AmplifierAmp Technology: Digipro® G3Amp Class: Class DRMS Power HF Amp: 200 W (100 W + 100 W)RMS Power LF Amp: 200 W (100 W + 100 W)Cooling: Convection

ProcessorController: DSP 56 bitAD/DA Converter: 24 bit/48 kHzSystem Presets: 9 presets (8x HF and Low-Mid corrections and 1x for service use)Limiter: Multiband, RMS/Peak, ThermalCrossover Frequency LF-HF: 2000 HzSlope LF-HF: 24 dB/Octave

InputSignal Input: 1x XLR fem, Bal.Signal Output: 1x XLR male, Bal.Power Supply: 400W SMPS with PSU Auto-range (110V~ and 220V~)Power Socket: 1x PowerCon In 1x PowerCon Out

MechanicsHousing: Polypropylen PPHandles: 2x back sideFittings: Integrated hardware with fast lock mechanicsSplay Angles: 0°- 1,5°- 3°- 4,5° - 6°- 8°- 10°- 12,5°- 15°Width: 460 mm (18.1 in)Height: 190 mm (7.5 in)Depth: 345 mm (13.6 in)Weight: 7.6 kg (16.8 lbs)

3-Way Active Line Array System

DVA M2STechnical DataSpeaker Type: 2-Way Slave Line Array Module

Acoustical dataFrequency Response [- 6dB]: 90 - 19.000 HzFrequency Response [-10 dB]: 80 - 20.000 HzMax SPL: One Unit: 126 dBHF: 2x1”Type HF: NeodymiumVoice Coil HF: 1”LF: 2x6.5”Type LF: NeodymiumVoice Coil LF: 1.5”Directivity: 100x20° Single unit

AmplifierLocated on the relative M2M module

ProcessorLocated on the relative M2M module

InputSignal Input: 1 Custom connector

MechanicsHousing: Polypropylen PPHandles: 2x back sideFittings: Integrated hardware with fast lock mechanicsSplay Angles: 0°- 1,5°- 3°- 4,5° - 6°- 8°- 10°- 12,5°- 15°Width: 460 mm (18.1 in)Height: 190 mm (7.5 in)Depth: 345 mm (13.6 in)Weight: 7.1 kg (15.7 lbs)

2-Way Active Line Array System

460 mm 345 mm

190 m

m


Low-mid range constant coverage

The low and mid-range reproduction is performed by the two 6,5” neodymium woofers, whose disposition and efficiency is extremely optimized thanks to a custom dual phase-plug.

The choice of neodymium magnets ensures even more value to the module, because it contributes to contain the overall weight of the M2M speaker under 7.6 kg/16.8 lbs (7,1 kg/15,7 lbs for the M2S model).

Clear and assertive top end

The two 1” drivers, finely tuned for the DVA M2 custom designed array horns, deliver a crystalline clear sound in high frequency, in order to provide to the audience the same intelligibility of the DVA line array systems.

Furthermore, the premium quality Neodymium magnets are synonym of reliability, performance and lightness.

Light weight. Heavy duty.

The high quality reinforced Polypropylene enclosure, and the internal hard-wearing anti-vibration structure, makes the M2M and M2S boxes very tough and able to work as heavy duty professional tools.

These features, together with neodymium transducers and the lightest amplifier ever engineered by dBTechnologies R&D, contributes to realize an exceptionally light, durable and powerful line array module for the well-known DVA Series.

Premium design

DVA Mini is characterized by a very clean aesthetic and a very discreet look.

Even the mechanics are hidden behind the frontal panel, and the elegant curvature of the frontal hexagonal grille contributes to create a very nice looking system for any kind of fixed installation purposes or live music events where the system should be totally invisible.

Consistent coverage pattern

Low and mid-range reproduction has been extremely optimized by a custom dual phase-plug. This technology significantly improves the mid-range efficiency of the speaker and, most of all, makes the horizontal coverage really homogeneous and consistent.


Download telemetry from USB

An integrated USB B-type port on the M2M amplifier allows the user to access the complete telemetry of the speaker, monitoring the status of every single element of the line array, including total playing hours, temperatures and performances reports.

Furthermore it is possible to download a file log as a status report, and upgrade the Firmware of the DVA M2M using the same USB port.

Fast lock mechanics

DVA mini is an incredibly versatile system, and you will find out this when you’ll have your hands-on it. dBTechnologies engineers have provided a way to simplify the process of installation and rigging by completely removing the pins and mechanics, in favor of a quick-locking system.

You’ll simply have to place one module below the previous one, and slide it towards one side until the red lever is up. Mounting the system in a flash has never been so easy!

Single rear mechanics

A single mechanic is provided on the back of every single DVA M module. Using incremental angles steps dBTechnologies has greatly improved the precision of the mechanics. Smaller steps between the modules mean more precision in the aiming of your DVA linear array system.

Ground stacking options

Every time it is not possible to fly the system, the DVA mini can serve you as a ground stacked system. Indeed this system can be easily mounted on the top of the MS12 sub without any additional frame or mechanic.

As an optional, DSA-M2 pole mount adapter can handle the line arrays modules, helping the user to elevate the system to a reasonable height through a standard pole.

DVA M2M ¢ DVA M2S ¢

Top Performance Combined With Total Control


MS12Full of Technology

ACTIVE BASS REFLEX FLYABLE SUBWOOFER

INTEGRATED HARDWARE WITH INNOVATIVE QUICK-LOCK MECHANICS

LIGHTWEIGHT AND ELEGANT PREMIUM DESIGN

700W RMS DIGIPRO® G3 CLASS-D AMPLIFIER (1400W PEAK POWER)

SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE

HI END DIGITAL CONTROLLER ON BOARD (DSP)

DUAL FUNCTION FEET (FLYING OR GROUND STACKING PURPOSES)

DVA MS12 is the flyable subwoofer which comes with the DVA mini series.

Especially designed to fit perfectly with an M2M and M2S array, the MS12

is equipped with a single 12” woofer in a bass reflex enclosure, acting as a

perfect low-end extension module for DVA mini systems.

385 mm

430 mm

460 mm


Active Bass Reflex Flyable Subwoofer

DVA MS12Technical DataSpeaker Type: Active bass reflex flyable subwoofer

Acoustical dataFrequency Response [- 6dB]: 45 - 140 HzFrequency Response [-10 dB]: 40 - 165 HzMax SPL: One Unit: 131 dBLF: 12”Voice Coil LF: 3”Directivity: Omnidirectional

AmplifierAmp Technology: Digipro® G3Amp Class: Class DPower Supply: 700W SMPS with PSU Auto-range (110V~ and 220V~)LF Amp: 700 W RMS (1400 W Peak)Cooling: Convection

ProcessorController: DSP 56 bitAD/DA Converter: 24 bit/48 kHzControls: X-Over frequency selection Phase selection (0° or 180°) Outputs mode selection (Link/X-over) Mini-USB type “B” port (service data)Limiter: Dual active, Multiband, RMS/Peak, ThermalCrossover Frequency LF-HF: 110Hz - 140HzLF X-over out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywood - Polyurea paintingHandles: 1x left side, 1x right sideFeet: 4x Dual Position Reversable Feet (flying/stacking mode)Fittings: M20 screw for pole mount on top side Integrated hardware with fast lock mechanicsWidth: 460 mm (18.1 in)Height: 430 mm (16.9 in)Depth: 385 mm (15.2 in)Weight: 26.5 kg (58.4 lbs)

Active Bass Reflex Flyable Subwoofer

Versatility

This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked.

The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it.

A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.

Digipro G3 Class-D amplifier

DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3.

Engineered by dBTechnologies, these new amplifiers deliver a power that you can’t expect from such a small amplifier. Distinguished by great new features, an exceptionally lightweight design and a very remarkably efficiency, it pushes the system performance at its maximum.

In order to let the speaker play flawlessly with both 110V~ and 220V~ power, a Switched Mode Power Supply with auto-range circuit has been built inside the DVA MS12.

Download telemetry from USB

An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports.

Furthermore it is possible to download a file log as a status report, as well as upgrade the Firmware of the DVA MS12 using the same USB port.


Full of Technology

LONG-THROW SYSTEM

FULLY POWERED THREE-WAY UNIT

FREELY SCALABLE TO SETUPS OF ANY SIZE

LOSSLESS SIGNAL PATH WITH NO NEED FOR SPEAKER CABLES

SEQUENTIALLY CONFIGURABLE ARRAY SEGMENTS

HIGH-END DIGITAL CONTROLLER (DSP) ON BOARD

NETWORK-READY WITH AN INTEGRATED RDNET PORT

HARDWARE COMPATIBLE WITH DVA T8 AND T4 SYSTEMS

T12

The global group of dBTechnologies companies develops and

manufactures individual speaker components autonomously, and often

specifically for the given application. We do not subscribe to the practice

of equalizing and optimizing speakers with elaborate technology to bring

them up to our standards. Instead, it has been our long-standing policy to

build from the bottom up components with specs tailored to deliver the

best audio performance for the application.

DVA T12 is a step up the evolutionary ladder from the successful DVA

T4 line array system. Although it provides more power and has greater

range, its active three-way design makes it just as easy to set up and install

as its predecessor.

PfCPfCPfC


3-Way Active Line Array Module

The DVA T12 features state-of-the-art neodymium speakers and high-performance digital amps with total of 1,410W output power.

In combination with top-drawer DSP and premium quality AD-DA converter, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications.

Weighing just 29kg, this remarkably compact unit belies its unobtrusive look by enabling you to set up very powerful line arrays that deliver extraordinary performance.

DVA T12Technical DataSpeaker Type: 3-Way Active Line Array Module

Acoustical dataFrequency Response [- 3dB]: 60 - 19.000 HzMax SPL: One Unit: 136 dBHF: 3x1”Voice Coil HF: 1.4”MF: 2x 6.5”Type MF: Neodymium Sealed Basket Phase Plug Horn LoadedVoice Coil MF: 2”LF: 12”Type LF: NeodymiumVoice Coil LF: 3”Directivity: 100x10° Single unit

AmplifierAmp Technology: Digipro® G2Amp Class: Class DHF Amp: 350 W RMSMF Amp: 350 W RMSLF Amp: 710 W RMSCooling: Convection

ProcessorController: DSP 56 bitAD/DA Converter: 24 bit/96 kHzSystem Presets: 9 (8x HF/Low-mid correction)Limiter: Dual Active Limiter Multiband RMS, Peak, ThermalCrossover Frequency MF-HF: 1800 HzSlope MF-HF: 24 dB/OctaveCrossover Frequency LF-MF: 420 HzSlope LF-MF: 24 dB/Octave

InputSignal Input: 1x XLR fem, Bal.Signal Output: 1x XLR male, Bal.Network: RDNet remote control RJ45 connector IN/OUTPower Socket: 1x PowerCon In 1x PowerCon OutVoltage Range: 90 - 240 V~

MechanicsHousing: Polypropylen PP Aluminium reinforcedHousing Design: Trapezoidal 10°Rain cover: IncludedRigging Points: Integrated rigging hardwareWidth: 580 mm (23.2 in)Height: 386 mm (15.44 in)Depth: 430 mm (17.2 in)Weight: 29,9 kg (63.93 lbs)

3-Way Active Line Array Module


Extended low-end performance

A 12” neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable fullrange applications. The 12” woofer is slanted inside the housing, giving the cabinet a lean, unobtrusive look.

¢ 12” NEODYMIUM WOOFER

¢ FULLRANGE CAPABILITY FROM 60HZ UP

Accurate and awesomely efficient midrange response

The DVA T12’s two 6.5” neodymium midrange are placed close together to maximize coherent coupling and response for those critical midrange frequencies. The speaker resides in a sealed basket to optimize the displacement volume. This makes the midrange even more responsive.With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5” midrange are equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern.

High-definition top end

The 1” neodymium HF drivers feature 1.4” Mylar diaphragms. Exceptionally light and responsive, they deliver richly detailed signals with remarkably linear frequency response. Specially developed for use in line arrays, these ultra compact drivers may be deployed in very close proximity to one another. This is essential to minimize interference in such arrays.The DVA T12 is loaded with three HF drivers tuned specifically for the custom designed array horn. This combination maximizes the coupling of the drivers’ outputs and extends the range of the HF signal.

Consistent coverage pattern

The DVA T12 features constant directivity horns, HF drivers, and midrange speakers optimized to deliver a uniform 100°-by-10° coverage pattern. The DVA makes the most of two acoustical effects to help distribute SPL evenly.One is the vector addition of individual horns’ output, with the other being cylindrical wave formation. The coverage pattern may be adapted to suit the sound reinforcement application by varying the length of the array and adjusting the splay between individual components.

¢ UNIFORM 100°-BY-10° COVERAGE PATTERN

¢ EVENLY DISTRIBUTED SPL

T12 LF

T12 MF

T12 HF

T12


DVA T12 ¢


Ground stacks

DRK-10 and DRK-20 harnesses can also serve to stack cabinets on the ground when rigging points are unavailable or the ceiling is too low. A special bracket adjusts the inclination down to 7.5°. The DRK-10/20 fits perfectly on an upright DVA S30 subwoofer. Equipped with two receptacles for quick-release pins, it is readily attached without tools.The DVA S30 subwoofer sports two 18“ speakers, a bass reflex horn, a 3000W power amp, and an internal DSP. (To learn more about it, see the chapter entitled Active Subwoofer).

¢ LINE ARRAY BENEFITS IN GROUND-STACKED CONFIGURATIONS

Compatible with DVA T8 and T4 units

DVA T12 and DVA T8 series housings and rigging hardware are compatible. This means DVA T8 units may be flown right below a T12 array for use as down-fills in large PA systems.

¢ COMPATIBLE DVA T8’S MAY SERVE AS FAR-FILL EXTENSIONS

Power Supply

The PFC switched-mode power supply allows up to four DVA T12 units to be connected to one phase.

When connecting large systems (up to 12 units), we recommend splitting up the power feed using a 16ACEKON adapter, tapped and spliced to feed three weatherproofed Power-Con connectors.


Full of Technology

3-WAY ACTIVE WITH A 700W/RMS DIGITAL POWER AMP

HIGH-END 56-BIT DSP ON BOARD

96 KHZ SAMPLING RATE

NETWORK-READY WITH AN INTEGRATED RDNET PORT

SIX MODULES CONNECTED TO ONE 16A PHASE PLACE


ACOUSTICALLY COMPATIBLE WITH THE DVA T12

MECHANICALLY COMPATIBLE WITH THE DVA T12

T8

DVA T8 is the latest and most advanced incarnation of a string of successful

line array systems that started with the DVA T4. Loaded with state-of-the-

art neodymium woofers, the DVA T8 features a high-performance digital

power amp with 700W/RMS total output, a high-end 56-bit DSP, and

premium-quality AD-DA converters.

These superior components come together to deliver superior audio

quality and high SPL.

Remarkably easy to handle, this lightweight, 14.2kg line array’s powerful

performance belies its look of subdued elegance and small footprint.

It’s hard to believe that something so petite can pack such a mighty punch.

PfCPfCPfC


3-Way Active Line Array Module3-Way Active Line Array Module

DVA T8Technical DataSpeaker Type: 3-Way Active Line Array Module

Acoustical dataFrequency Response [- 3dB]: 66 - 18.000 HzMax SPL: One Unit: 132 dBHF: 2x1”Voice Coil HF: 1.4”MF: 1x 6.5”Type MF: Neodymium Sealed Basket Phase Plug Horn LoadedVoice Coil MF: 2”LF: 8”Type LF: NeodymiumVoice Coil LF: 2.5”Directivity: 100x15° Single unit

AmplifierAmp Technology: Digipro® G2Amp Class: Class DHF Amp: 175 W RMSMF Amp: 175 W RMSLF Amp: 350 W RMSCooling: Convection

ProcessorController: DSP 56 bit with double precision filtersAD/DA Converter: 24 bit/96 kHzSystem Presets: 9 (8xHF and Low-mid correction)Limiter: Dual Active Limiter Multiband RMS, Peak, ThermalCrossover Frequency MF-HF: 1900 HzSlope MF-HF: 24 dB/OctaveCrossover Frequency LF-MF: 400 HzSlope LF-MF: 24 dB/Octave

InputSignal Input: 1x XLR fem, Bal.Signal Output: 1x XLR male, Bal.Network: RDnet remote control RJ45 connector IN/OUTPower Socket: 1x Powercon In 1x Powercon OutVoltage Range: 90 - 240 V~

MechanicsHousing: Polypropylen PP Metal reinforcedHousing Design: Trapezoidal 15°Rain cover: IncludedRigging Points: Integrated rigging hardwareWidth: 580 mm (23.2 in)Height: 240 mm (9.6 in)Depth: 327 mm (13.08 in)Weight: 14.2 kg (31.3 lbs)

Top Performance Paired with Total Control

The DVA T8 is a fully active, three-way speaker system equipped with the same innovative technologies that feature so prominently in the DVA T12.

Its power supply, DSP, power amps, woofers and drivers were all developed and painstakingly tuned specifically for the DVA T8 system by the dBTechnologies team of engineers.

Precise directivity

The DVA T8 sports constant directivity horns, HF drivers, and midrange woofers optimized to deliver a uniform 100°-by-15° coverage pattern. It makes the most of two acoustical effects to help distribute SPL evenly.

One is the vector addition of individual horns’ output; the other is cylindrical wave formation. These two effects come together to create a uniform coverage pattern that is easily adapted to different venues by varying the length of the array and adjusting the splay between individual components.

¢ UNIFORM COVERAGE PATTERN

¢ EVENLY DISTRIBUTED SPL


Extended low-end performance

A powerful 8” neodymium woofer, paired with a 350W power amp, covers the low frequency range with an assertive punch that reaches down to 70 Hz.

¢ 8” NEODYMIUM WOOFER

¢ FULLRANGE CAPABILITY FROM 70 HZ UP

Accurate, awesomely efficient midrange response

Loaded with a custom 6.5” neodymium midrange, the DVA T8 also delivers excellent midrange response, which has such a formative influence on shaping the sonic image. The midrange is housed in a sealed chassis. Its high BL factor makes it even more responsive so that it renders transients faithfully. A phase plug feeds into a frontloaded horn tuned to achieve a uniform coverage pattern.

¢ ONE 6.5” NEODYMIUM MIDRANGE WITH A FRONTLOADED HORN

¢ SUPERIOR TRANSIENT RESPONSE

High-definition top end

The 1” neodymium HF drivers feature 1.4” Mylar diaphragms. Exceptionally light and responsive, they deliver richly detailed signals with remarkably linear frequency response. Developed especially for use in line arrays, these drivers may be deployed in very close proximity to one another. This is essential to minimize interference in such arrays.

¢ TWO 1” NEODYMIUM HF DRIVERS WITH ARRAY HORN

¢ REMARKABLY TRANSPARENT RESPONSE

T8 LF

T8 MF

T8 HF


DVA T8 ¢


Durable yet light hybrid polypropylene enclosure

This enclosure’s surface is immune to knocks and scratches and fully resistant to water and moisture. A sophisticated metal skeleton provides internal bracing that connects its component parts, reinforces the housing and soften resonance.

¢ METAL-REINFORCED POLYPROPYLENE HOUSING

¢ LIGHT YET EXCEEDINGLY DURABLE

¢ INTEGRATED RAIN PROOFING

Extraordinary dynamic range and natural sound

The DVA T8’s signal processors and AD/DA converters were engineered to achieve transcendent sound quality with great fidelity and dynamic range with 56-bit digital signal processing at a sampling rate of 96 kHz.

DSPs equalize every signal path, aligning phases and time, and handle loads with digital peak, RMS, and thermal limiters to maximize operating safety, power management and performance even at threshold levels.

¢ EXCELLENT AUDIO SPECS

¢ PERFECT SYSTEM EQUALIZATION

Easy setup - configuration at the touch of a button

The DVA T8’s DSP offers eight system presets that adapt the unit to its assigned task in the array.

They adjust the gain structure and EQ for the near-field/midfield and far-field positions to compensate for high frequencies absorbed by air as well as for low/midrange frequency coupling as the array length increases. No further manual adjustments are necessary. All presets may be selected using the rear-mounted rotary encoder or downloaded from a PC using RDnet software.

¢ SIMPLEST SYSTEM CONFIGURATION

¢ VERY FAST SETUP


Compact yet remarkably powerful

Digipro®G2 digital power amps - compact yet remarkably powerful

The DVA T8 sports three Class-D digipro® power amps, one for each signal path. Embodying the latest advance in digital high-performance amps, the digipro®’s sophisticated technology delivers more from less – that is, maximum power from a package designed to minimized weight and size.

¢ 700 W/RMS

¢ HIGH PERFORMANCE AND TRANSPARENCY WITH TRUE DYNAMIC RESPONSE

SMPS with PFC for consistently superb performance

The DVA T8’s power supply consists of independent networked devices. Incorporating the latest IT technology, it was engineered to maximize operating safety, efficiency, and performance.

The main 750W power supply provides plenty of juice to the power amps and features PFC (power factor correction). A secondary power supply feeds the microcontrollers and the DSP, and serves to ramp up check routines and the main power supply. The smart IPOS™ (Intelligent Power-On Sequence) circuit keeps the overall system’s inrush current low.

¢ WIDE-RANGE 90-TO-240V SMPS POWER SUPPLY WITH PFC

¢ IPOS™ CIRCUIT FOR LOW INRUSH CURRENT

High reliability and operating safety

The processor monitors amp’s temperature, voltage, current, impedance, input, output, and other data independently and continuously. It detects problems such as an impending overload, and attenuates the signal gradually in small steps or mutes it altogether, depending on the given temperature and level.

¢ REAL-TIME OPERATING STATUS MONITORING

¢ STATUS REPORT DELIVERY VIA THE DVA USB MANAGER


Handling, Stacking and Flying Cabinets

The DVA T8 comes with built-in rigging hardware. The splay between

enclosures may be adjusted in incrementally from 0° to 15°. The DRK-10 harness holds up to 16 flown T4 units. At just 14.2 kg, the DVA T8 is exceptionally light so an array with six elements weighs less than 100 kg. This is an advantage greatly appreciated by everyone who handles and transports the array.

A single person can rig up and fly the system, even from trusses and towers rated to handle lighter loads.

¢ VERY LIGHT POINT LOAD

¢ PRECISE ALIGNMENT

¢ DRK-10 HARNESS FLIES UP TO 16 UNITS

Compatible with DVA T12 units

DVA T8 and DVA T12 series housings are acoustically and mechanically compatible.

This means DVA T12 units may be flown right above a T8 array for use as far-fills.

¢ COMPATIBLE DVA T12S MAY SERVE AS FAR-FILL EXTENSIONS

DSA 4 pole mount adapter

The DSA 4 pole mount adapter holds up to 3 DVA T8 modules on one pole. A set screw adjusts the tilt angle, smoothly and precisely. Compact PA systems can be configured for smaller applications simply by adding S1518N subwoofers to the setup.

DVA T8 ¢



Full of Technology

8 MODULES (2 METERS ARRAY) CONNECTED TO ONE 16A PHASE

PLACE JUST 125 KG LOAD ON THE PICK-POINT

FULLY POWERED UNITS, FREELY SCALABLE TO SETUPS OF ANY SIZE


NONE OF THE IMPEDANCE AND AMP CHANNEL AVAILABILITY

CONCERNS ASSOCIATED WITH PASSIVE MODELS

SEQUENTIALLY CONFIGURABLE ARRAY SEGMENTS

DIGITAL CONTROLLER (DSP) ONBOARD

FOR UTMOST OPERATING SAFETY

T4

A three-way active line array system, the DVA T4 has set new standards in

the sound reinforcement industry since its 2007 market launch. Better yet,

it has brought the benefits of real line array technology to a much wider

range of users.

Equipped with top-notch features and engineered for maximum

versatility, the DVA T4 delivers premium performance and ensures

excellent return on investment.

PfCPfCPfC


3-Way Active Line Array Module3-Way Active Line Array Module

DVA T4

Technical DataSpeaker Type: 3-Way Active Line Array Module

Acoustical dataFrequency Response [- 3dB]: 80 - 19.000 HzMax SPL: One Unit: 128 dBHF: 2x1”Voice Coil HF: 1.4”MF: 1x 6.5”Type MF: Neodymium Sealed Basket Phase Plug Horn LoadedVoice Coil MF: 1.5”LF: 8”Type LF: NeodymiumVoice Coil LF: 2.5”Directivity: 100x15 ° Single unit

AmplifierAmp Technology: Digipro®Amp Class: Class DHF Amp: 100 W RMSMF Amp: 100 W RMSLF Amp: 220 W RMSCooling: Convection

ProcessorController: Analog DevicesAD/DA Converter: DSP 24 bit/48 kHzSystem Presets: 8, HF/Low-mid correctionLimiter: Dual Active Limiter Multiband RMS, Peak, ThermalCrossover Frequency MF-HF: 1800 HzSlope MF-HF: 24 dB/OctaveCrossover Frequency LF-MF: 400 HzSlope LF-MF: 24 dB/Octave

InputSignal Input: 1x XLR fem, bal.Signal Output: 1x XLR male, bal.Power Socket: 1x PowerCon In 1x PowerCon OutVoltage Range: 90 - 240 V~

MechanicsHousing: Polypropylen PP reinforcedHousing Design: Trapezoidal 15°Rigging Points: Integrated rigging hardwareWidth: 580 mm (23.2 in)Height: 240 mm (9.6 in)Depth: 327 mm (13.08 in)Weight: 13.8 kg (30.42 lbs)

The DVA T4 is equipped with unique digital power amps that provide a total of 420W RMS. Driven by Digipro® technology, their resolution is several-fold that of conventional digital amps. They render signals very accurately with this high-definition audio capability.

Sonic images are almost impossible to distinguish from those of analog sources, even in the HF range. The amps are equipped with high-quality delta-sigma converters.

The DVA T4’s digital power amp features DPP™ (Digital Power Processing) technology and a multiband compressor/limiter with separate response curves for each signal path. Its dynamic range is exceptionally wide.

For example, headroom in the middle and high-frequency bands ranges up to 22dB. This innovative circuitry not only maximizes dynamic response, it also ensures signals are rendered accurately and uniformly even at threshold levels.


Reliability

The 8” Neodymium-Woofer is equipped with a high power 2.5” voice coil to provide superior sound pressure level in a very compact size.

¢ 8” VC 2.5” NEODYMIUM WOOFER

High Efficiency

The 6.5” Neodymium-Midrange speaker has a sealed basket to provide an optimized volume capacity including high sensitivity and superb sound reproduction. It also has a horn exit including phase plug for defined and linear sound emission.

¢ 6.5” VC 1.5” NEODYMIUM MIDRANGE

State-of-the-Art Drivers

The build in 1” Neodymium- Drivers are equipped with a 1.4” Mylar- Membrane which allow a very quick response and provide a linear frequency range at a surprisingly low weight. This driver was specially designed for the use with Line-Arrays. Its compact measurements allow very close proximity which is a main factor for minimum interference.

¢ 2X 1” VC 1.4” NEODYMIUM DRIVERS

Constant Directivity

The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly.

The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements.

However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. That’s how the effect of optimised SPL distribution is managed.

T4 LF

T4 MF

T4 HF

T4


Groundstacking

TIn case there are no possibilities to fly the system or the ceiling of the venue is not high enough, the DRK-10 can be used for groundstacking too.A special bracket provides an inclination up to 7.5°.The DRK-10 fits exactly onto the surface of an upright positioned DVA S20 subwoofer and can be mounted by two quick release pins on top of the sub.The combination of a DVA S10 subwoofer and a DSA-4 pole mount adaptor holding up to three DVA T4 mid-/high-range units is a great solution for smaller applications and for delay zone sound reinforcement.The continuously adjustable DSA-4 adaptor lets you aim the mid-/high-range units.

Flying the cabinets

The DVA T4 comes with precisely engineered flying hardware.

The hardware in combination with the extremely low weight of a T4 top allows easy and fast setup of the whole system. The curving can be adjusted in steps of 2.5° within a range of 0° and 15°. For an optimum of performance the system should be principally flown.

The DRK-10 flying frame holds up to 16 T4. For professional handling the frame is well balanced and the angle of inclination can be corrected with the upper rear flying rails.

The DSA-4 adapter attaches to the bottom cabinet and secures the rig to the truss with half-couplers and a pipe. We recommend using this adapter to prevent the stack from twisting and swinging.

The combination of DVA S10 subwoofers and DVA T4 mid-/high-range units in a flown array packs a mighty fullrange punch with serious SPL. This setup is the preferred configuration in venues where you are unable to place bass bins on the floor or where you wish to cover bleachers or balconies.

Handling, stacking, and flying the DVA T4

The DVA T4 Line-Array element has a sensational weight of only 13,8kg.

The obvious advantage for handling and transport also makes flying possible where under normal circumstances the trussing is not strong enough to support also flying of the audio devices an Array of six T4 Tops therefore weighs less than 100 kg.

For system dimensioning please refer to DVA Composer simulation software.

DVA T4 ¢



Full of Technology

VARIABLE CROSSOVER FREQUENCIES

PRECISE LIMITER FUNCTIONS

ON BOARD DELAY FOR

PERFECT TIME ALIGNMENT

PRESET FOR CONFIGURING

CARDIOID SYSTEMS

SETTINGS ACCESSIBLE

VIA A ROTARY ENCODER

X-OVER OUT

RDNET NETWORK PORT

SUB WOOFERS

DVA bass bins are loaded with state-of-the-art, high-performance

subwoofers.

Equipped with powerfull woofers with voice coils with diameters up to 4“,

these units‘ load handling capacity is extremely high, and their transient

response is remarkably faithful.

The dual ventilation system minimizes heat buildup and power compression

while helping to maximize loading handling capacity and reliability.

The woofers feature a fiberglass-reinforced diaphragm, an exceedingly

robust triple-roll surround, and a geometrically optimized cone. All this

culminates in peak-to-peak excursion capabilities ranging up to 48 mm.


High Performan Subwoofer SystemsHigh Performance Subwoofer Systems

These subwoofers are driven by digipro®G2 digital power amps with up to 3000W output. Digipro®G2 technology is so very efficient that it does not require fans. With no moving parts to tend to, these amps are altogether maintenance-free.

Equipped with PFC switched-mode power supplies, they are largely impervious to line voltage fluctuations, which is a tremendous asset in a touring rig.

Our network-enabled DVA subwoofers are designated by an “N” in the product name.

They feature a premium-quality DSP boasting excellent audio specs with variable crossover frequencies, precise limiter functions and adjustable delay settings for perfect time alignment.

A special preset makes it easy to set up cardioid systems with enhanced directivity. Settings are readily adjusted using the rear-mounted rotary

¢ High-performance bass woofers

¢ High-performance digipro®G2 Class-D power amp

¢ High-quality DSP and RDnet

¢ Built tough for touring

encoder. The DSP also provides an X-Over output for connecting satellites (in stereo on S08 and S09 units).

Factory-equipped with an RDnet port, these subwoofers are ready for integration into elaborate, remotely controlled and monitored DVA T12 sound reinforcement systems via RJ45 inputs and outputs that connect the units to the RDnet hub.

Made of sturdy birch multiplex covered in robust black textured lacquer, the subwoofer housing is fronted with a rugged speaker grille. The enclosure is easy to tote with its comfortable carrying handles.

Optional dust covers protect it on the go. With 16 threaded bushings each on their rear panels, the S09, S10, S30N, S1518N, 1521N and S20 bins are ready to accept Blue Wheels. Retrofitted with the appropriate fly kit, S09, S10, 1518N and 2585N subwoofers are easily rigged and flown.


DVA S30 N Subwoofer, 2x18” Bassreflex Horn Loaded

Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S30 packs a muscular, ultra lowfrequency punch.

It delivers very powerful performance indeed with a range extending down to the lowest frequencies.

This sub-bass powerhouse is the perfect addition to large PAs and an excellent complement to DVA T12 mid-/high-range units in stacked arrays.

Bass reflex horn housing

This sophisticated hybrid design brings together the benefits of bass reflex and horn systems in a compact housing engineered to render low frequencies with high SPL.

The two baffle boards are arrayed in the form of a V. They guide the central bass reflex channel‘s sound energy into the horn’s port. This funneling action is smooth and uniform, greatly increasing its range.

The high-quality birch multiplex housing is covered in robust black textured lacquer and equipped with eight grips.

On the back is a transport dolly that removes easily via quick-release pins to keep the wheels from rattling.

DVA S30 NTechnical DataSpeaker Type: Active Bassreflex-Horn Subwoofer

Acoustical dataFrequency Response [- 3dB]: 30 - 120 HzMax SPL: 141 dBDirectivity: Omnidirectional, Cardiod Option with DSP setupLF: 2x18”Voice Coil LF: 4”

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower Supply: 3 kW SMPS with PFCLF Amp: 3000 W RMSCooling: Convection

ProcessorController: DSP 56 bitAD/DA Converter: DSP 24 bit/48 kHzSystem Presets: X-Over,DelayPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: 0-4.5 ms internalCrossover Frequency LF-HF: 75-120Hz |steps of 5HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 4x Per SideAccessory: Dolly, Wheels 100mm, Dust Cover, Rain CoverRigging Points: 2xPick Points on top to fix DRK10/20 rigging framesWidth: 1100 mm (44 in)Height: 580 mm (23.2 in)Depth: 720 mm (28.8 in)Weight: 83 kg (182.98 lbs)

PfCPfCPfC


DVA S1521 N Subwoofer, 21” Bassreflex

The DVA S1521 N is a powered 21” subwoofer housed in a bass reflex enclosure that we tuned for accurate, ultra low-frequency response.

It readily integrates into large DVA and DVX Series PA systems as a sub-bass unit or as a stacked subwoofer.

Made of durable birch multiplex housing covered in robust black textured lacquer, the high-quality housing provides six carrying handles, an M20 pole mount, and bushings on the rear panel that accept casters. Pick-points for attaching DRK-10 and DRK-20 harnesses are built into the top panel to enable easy, safe stacking.

Top-notch 21” woofer

Serving as the unit’s transducer is a state-of-the-art 21” woofer with 4.5” voice coil.

This combination of high-quality materials and sophisticated magnetic drivers fields some pretty impressive results.

Even very low bass frequencies are rendered with pinpoint precision and hairtrigger transient response, treating audiences to a breathtaking audio experience.

DVA S30 N ¢ DVA S1521 N ¢

Ultra Low-Frequency Punch

DVA S1521 NTechnical DataSpeaker Type: Active Bassreflex-Subwoofer

Acoustical dataFrequency Response [- 3dB]: 30 - 105 HzMax SPL: 139 dBDirectivity: Omnidirectional, Cardiod Option with DSP setupLF: 21”Voice Coil LF: 4.5”

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower Supply: 1.5 kW SMPS with PFCLF Amp: 1500 W RMSCooling: Convection

ProcessorController: DSP 56 bitAD/DA Converter: 24bit/96 kHzSystem Presets: X-Over,DelayPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: 0-4.5 ms internalCrossover Frequency LF-HF: 60-105Hz |steps of 5HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 3x Per SideAccessory: Dolly, Wheels 100mm, Dust Cover, Rain CoverPole Mount: M20Rigging Points: 2xPick Points on top to fix DRK10/20 rigging framesWidth: 580 mm (23.2 in)Height: 800 mm (32 in)Depth: 720 mm (28.8 in)Weight: 52.5 kg (115.74 lbs)

PfCPfCPfC


DVA S1518 N Subwoofer, 18”, Bandpass

The DVA S1518 N is a bandpass subwoofer based on the DVA S10, but with 50 percent higher power amp output, an integrated DSP, and an RDnet link.

A remarkably versatile subwoofer, it delivers tight and punchy bass response that supports and transitions smoothly to satellites’ lower midrange frequencies.

The DVA S1518 N is equipped with a next-generation, 18” woofer driven by a built-in 1500W digipro® G2 digital power amp.

Subwoofer arrays are easily flown using the optional SRK10 rigging hardware retrofit.

The S1518 N will also serve you well in compact stacks paired with DVA T12, T8 and T4 units or DVX Series enclosures.

DVA S1518 NTechnical DataSpeaker Type: Active Bandpass Subwoofer

Acoustical dataFrequency Response [- 3dB]: 39 - 120 HzMax SPL: 138 dBDirectivity: Omnidirectional, Cardiod Option with DSP setupLF: 18”Voice Coil LF: 4”


ProcessorController: DSP 56 bitAD/DA Converter: 24bit/96 kHzSystem Presets: X-Over, DelayPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: 0-4.5 ms internalCrossover Frequency LF-HF: 75-120Hz |steps of 5HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 3x Per SideAccessory: Dolly, Wheels 100mm, Dust Cover, Rain CoverPole Mount: M20Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging framesWidth: 515 mm (20.6 in)Height: 640 mm (25.6 in)Depth: 720 mm (28.8 in)Weight: 46 kg (101.41 lbs)

PfCPfCPfC


DVA S2585 N Subwoofer, 18”+ 15”, Cardiod

The DVA S2585 N is a compact subsystem featuring a cardioid layout designed for utmost directivity.

The system consists of two separate chambers, one loaded with a forward facing 18” woofer and another with a rearward facing 15” woofer. The integrated digipro®G2 digital power amps provide 2500W total output power. The high-quality DSP filters signals and controls the speakers to deliver a remarkably authentic audio image and faithful transient response.

The housing is ready to fly with the optional SRK10 Rigging Kit is all it takes to put up flown cardioid sub arrays.

Cardiod- Design

Many systems lack low-frequency directivity and, as a result, are plagued by interference and annoying noise.

The S2825 N, in contrast, was engineered specifically for enhanced low-frequency directivity. And it not only sounds great, it is also easy to handle and transport.

DVA S1518 N ¢ DVA S2585 N ¢


DVA S2585 NTechnical DataSpeaker Type: Active Cardiod-Subwoofer

Acoustical dataFrequency Response [- 3dB]: 35 - 120 HzMax SPL: 140 dBDirectivity: CardiodLF: 18”+15”Voice Coil LF: 4”


ProcessorController: DSP 56 bitAD/DA Converter: 24bit/96 kHzSystem Presets: X-Over,DelayPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: 0-4.5 ms internalCrossover Frequency LF-HF:75-120Hz |steps of 5HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 3x Per SideAccessory: Dolly, Dust Cover, Rain CoverPole Mount: M20Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging framesWidth: 515 mm (20.6 in)Height: 640 mm (25.6 in)Depth: 1000 mm (40 in)Weight: 65 kg (143.3 lbs)

PfCPfCPfC


DVA S20 DP Subwoofer, 2 x 18” Bassreflex

Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority.

It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays.

Thanks to the integrated Quick-Release-Pins, both DRK-10 and DRK-20 frames can be easily mounted to set up a ground stacked system.

DVA S20 DPTechnical DataSpeaker Type: Active Bassreflex Subwoofer

Acoustical dataFrequency Response [- 3dB]: 35 - 120 HzMax SPL: 138 dBDirectivity: Omnidirectional, Cardiod Option with SDD ModuleLF: 2x18”Voice Coil LF: 4”

AmplifierAmp Technology: Digipro®Amp Class: Class DLF Amp: 2000 W RMSCooling: Convection

ProcessorController: AnalogPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: SDD ModuleCrossover Frequency LF-HF: 90, 120 HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 4x Per SideAccessory: Wheels 100mm, Dust CoverRigging Points: 2xPick Points on top to fix DRK10/20 rigging framesWidth: 1100 mm (44 in)Height: 580 mm (23.2 in)Depth: 720 mm (28.8 in)Weight: 84 kg (185.19 lbs)

PfCPfCPfC


DVA S10 DP Subwoofer, 18” Bandpass

The bandpass subwoofer DVA S10 is equipped with a single 18” woofer of the newest generation, driven by a 1000W digitalpower amp.

Using the optionally available flyware, up to two DVA S10 DP can be flown mounted to the DRK-10 rigging kit.

Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack.

Cardioid setup with the SDD module

A cardioid setup comprising the SDD module and two or three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area.

Never before has this innovative solution – which until today required much greater effort and more elaborate gear – been so easy to achieve with such professional results.

DVA S10 DPTechnical DataSpeaker Type: Active Bandpass Subwoofer

Acoustical dataFrequency Response [- 3dB]: 40 - 120 HzMax SPL: 136 dBDirectivity: Omnidirectional, Cardiod Option with SDD ModuleLF: 18”Voice Coil LF: 4”


ProcessorController: AnalogPhase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: SDD ModuleCrossover Frequency LF-HF: 90, 120 HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularColor: Black, WhiteHandles: 3x SidePole Mount: 1x M20Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames Accessory: Wheels 100mm, Dust Cover, Rain CoverWidth: 515 mm (20.6 in)Height: 640 mm (25.6 in)Depth: 720 mm (28.8 in)Weight: 48 kg (105.82 lbs)

PfCPfCPfC

DVA S20 DP ¢ DVA S10 DP ¢



DVA S09 Subwoofer

A remarkably compact 15” subwoofer in a band-pass design, the DVA S09 DP delivers true, tight, and punchy bass response. With a height of just 44 cm, it can be flown above DVA T4 modules to keep the rig‘s footprint inconspicuous.

The S09 comes with two features that make it the perfect base for a high-quality satellite system, for example, when paired with the DVX D10. One is an integrated active stereo crossover with two cutoff frequencies to choose from, 90Hz and 120Hz. The other is a phase inversion switch. One PowerCon socket connects to the mains power supply, while two PowerCon outputs connect satellites.

SRK-09 Fly Kit

Retrofitted with the optional SRK-09 fly kit, the DVA S09 DP subwoofer is easily rigged to a DRK-10 harness and flown alongside further DVA T4 mid-/high-range units.

DVA S09 DPTechnical DataSpeaker Type: Active Bandpass Subwoofer

Acoustical dataFrequency Response [- 3dB]: 45 - 120 HzMax SPL: 134 dBDirectivity: OmnidirectionalLF: 15”Voice Coil LF: 4”


ProcessorController: Analog (Stereo)Phase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: NOCrossover Frequency LF-MF: 90, 120 HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularColor: Black, WhiteHandles: 2x SidePole Mount: 1x M20Rigging Points: 2xPick Points on top to fix DRK10/20 rigging framesAccessory: Wheels 100mm, Dust Cover, Rain CoverWidth: 515 mm (20.6 in)Height: 440 mm (17.6 in)Depth: 720 mm (28.8 in)Weight: 37.5 kg (82.67 lbs)


S08 Subwoofer

The DVA S08 DP is a remarkably compact 12” high power active bassreflex subwoofer for professional applications and to satisfy upmarket requirements.

It delivers a high momentum and at the same time reproduces a punchy low end. Equipped with a 800W/RMS digipro® digital power amp including switch mode supply, this unit provides a high sound pressure level of up to 131dB. Furthermore there is a powercon in and out for mains connection.

DVA S08 DPTechnical DataSpeaker Type: Active Bassreflex Subwoofer

Acoustical dataFrequency Response [- 3dB]: 40 - 150 HzMax SPL: 131 dBDirectivity: OmnidirectionalLF: 12”Voice Coil LF: 3”


ProcessorController: Digital + Analog (Stereo)Phase: 0, 180°Limiter: RMS, Peak, ThermalDelay Option: NOCrossover Frequency LF-MF: 90, 120 HzLF-Xover out slope: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: RectangularHandles: 1x on topPole Mount: 2x M20Accessory: Dust CoverWidth: 360 mm (20.8 in)Height: 520 mm (14.4 in)Depth: 500 mm (20 in)Weight: 23 kg (50.71 lbs)

DVA S09 DP ¢ DVA S08 DP ¢



Full of Technology

MOTORIZED FLYBAR

ACCELEROMETER ON BOARD

REAL TIME DATA USING RDNET SOFTWARE

MANUAL REMOTE CONTROL

SAME WEIGHT CAPACITY OF DRK-20

EXTREMELY ACCURATE 0,5° AIMING RESOLUTION

DRK20M

The new DRK20M is the first motorized fly bar in the world for line

array systems.

Equipped with a system that modifies the clusters focal point, it is possible

to adjust the inclination of the sound system in any moment without

having to lower the loudspeakers; this makes it possible to change the

sound coverage, when necessary, even during the event.

This system can be directed from RDNet or by simply using a manual

remote control connected with a standard XLR cable.

Motorized Rigging Frame

The new DRK20M is also equipped with an RDNet interface, in order to control each of its functions through a computer and monitor its position in real time.

The new motorized flybar is also very useful in facilitating the installation of line array modules by adjusting the clusters inclination progressively, as each single modules’ applied angles vary.

Thanks to its solid structure in special steel, it is possible to hang speakers of the DVA series with a weight of up to 1000 kg, TUV certified.

0°


Accessories for DVA SystemsAccessories for DVA Systems

CA

BLE

SIN

STA

LLA

TIO

NW

HEE

LSC

OV

ERS

FLIG

HT

CA

SE

DRK-20M

DRK-M5

DRK-20

DSA-M2

DRK-10

DS2-S

DWB 3

DSA 4

DS2

SRK-10

SRK-09

SRK-09W

DT-6

ADT-8-MINI

ADT-6

DWK 20

DO 218

DO 18

DRP T4

RC M2

RC MS12-SUBH

DRP S30

DRP S15

DRP S10

TC 20S

TC 10S

TC 09S

TC 08S

ADTF-2

ADTF-3

DTF 4

F 4

M2M

l

l

l

l

M2S

l

l

l

l

MS12

l

l

l

l

l

T12

l

l

l

l

l

l

l

T8

l

l

l

l

l

l

l

l

l

T4

l

l

l

l

l

l

l

l

l

l

S30N

l

l

l

l

l

l

l

S1521N

l

l

l

l

l

l

S1518N

l

l

l

l

l

l

l

l

l

l

S2585N

l

l

l

l

l

l

l

l

l

S20 DP

l

l

l

l

l

S10 DP

l

l

l

l

l

l

l

l

S09 DP

l

l

l

l

l

l

l

l

l

S08

l

l

l

RJ45-RJ45-150

RJ45-RJ45-75

AFL 05

DCK 27

RJ45-XLR M

RJ45-XLR F

DPC 15

DCK 15

DCK 45

DAC 15

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l l

l

l

l

l

l

l l l

38 DVX Digital Active Speakers

Digital Active Speakers

DVX DM12 THDVX DM15 THDVX D8 HPDVX D10 HPDVX D12 HPDVX D15 HPDVX DM28DVX DM12DVX DM15

2-Way Power Active Speakers2-Way Power Active Speakers

The DVX series combines dBTechnologies’ new digipro®G2 power amp technology and state-of-the-art transducers to raise the bar several notches for sound pressure, performance, and response.

Boasting an impressive feature set comprising high quality input board, multifunctional birch multiplex housings equipped with rigging points and rails, flexible configuration options, and an unrivalled price-to-performance ratio, DVX systems are discerning professionals’ go-to solutions for a vast range of applications.

Alongside the four multifunctional two-way systems, the DVX line also comprises the three DM28, DM12, and DM15 low-profile stage monitors. All models feature high-quality loudspeaker chassis, Innovative, high-performance dBTechnologies digipro®G2 power amps deliver impressive 900W each to drive these advanced speakers.

¢ Versatile and robust

¢ DVX Multifunctional Systems

¢ High-quality speaker components

¢ Entire Active System Design EASD™

Specially designed, rotatable high-frequency horns provide very clean and constant directivity. All highfrequency horns are made of aluminum to help keep their drivers cool.

The integrated DSP carries out various tasks involved in controlling digipro®G2 power amps, serving as an active equalizer, x-over, high-pass filter, as well as performing audio setup tasks, aligning phases and delay time, and controlling the limiter to ensure utmost reliability and operating safety.

All DVX Series models come in a professional-grade birch multiplex housing equipped with PowerCon mains connectors and a rugged metal grille backed withlaminated acoustic foam rubber. D12 HP and D15 HP models feature high-quality aluminum grips, a pole mount, and a rigging system. DM12 and DM15 monitors are also equipped with a pole mount.

39DVX Digital Active Speakers


Full of Technology

1500W RMS DIGIPRO™

CLASS-D AMPLIFIERS

STATE-OF-THE-ART

NEODYMIUM TRANSDUCERS

ROTATABLE FRONTAL PANEL

(LEFT-RIGHT CONFIGURATION)

DOUBLE EQ PRESET ON-BOARD

INPUT AND OUTPUT PANELS

ON BOTH SIDES

SMPS WITH ACTIVE PFC

(FROM 100V~ TO 240V~)

DM12 THDM15 TH

DVX DM TH: it’s not just an upgrade of the well-known series DVX DM digital

monitors, it is rather a brand new line. These products are exclusively aimed

at fulfill the requirements of musicians and stage engineers.

The DVX TH series is equipped with neodymium heavy-duty woofers,

12” or 15”, with 4” voice coil. Beside it features top-class neodymium

compression drivers, 1500W RMS Digipro™ amplifiers and Switched Mode

Power Supply with PFC. The products’ features provide the musicians with

an excellent listening, even on the most demanding and loud stages. DVX

TH ensures a sound quality and intelligibility without compromise.

The models DVX DM12 TH and DM15 TH can reach elevate SPL levels,

maintaining both a linear response and an impressive punch. At the same

time it will keep unaltered the DVX DM’s typical dimensions and versatility.

PfCPfCPfC


Professional Stage MonitorsProfessional Stage Monitors

DVX DM12 THTechnical DataSpeaker Type: 2-way Active Stage Monitor

Acoustical dataFrequency Response [- 6dB]: 63 - 16.000 HzFrequency Response [- 10dB]: 59 - 18.000 HzMax SPL: 136 dBHF: 1.4”Type HF: NeodymiumVoice Coil HF: 3”Horn: Aluminum rotatable hornLF: 12”Type LF: NeodymiumVoice Coil LF: 4”Directivity: 90x40°

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower RMS: 1500 WPeak Power: 3000 WLF: 750 W RMS @4 OhmHF: 375 W RMS @8 OhmCooling: Single fan

ProcessorController: DSP 56 bitAD/DA Converter: 24 bit/48 kHzSystem Presets: Flat EQ, TH EQLimiter: Dual active, Multiband, RMS/Peak, ThermalCrossover Frequency LF-HF: 1070 HzSlope LF-HF: 24 dB/Octave

MechanicsHousing: Multiplex birch plywood - Polyurea paintingAdvanced features: Rotatable front panel (left or right monitor customization)Angles Up: 35°, 55°Handles: 1x left side, 1x right sideWidth: 670 mm (26.4 in)Height: 325 mm (12.8 in)Depth: 405 mm (15.9 in)Weight: 24.5 kg (54 lbs)

DVX DM15 THTechnical DataSpeaker Type: 2-way Active Stage Monitor

Acoustical dataFrequency Response [- 6dB]: 55 - 16.000 HzFrequency Response [- 10dB]: 47 - 18.000 HzMax SPL: 136 dBHF: 1.4”Type HF: NeodymiumVoice Coil HF: 3”Horn: Aluminum rotatable hornLF: 15”Type LF: NeodymiumVoice Coil LF: 4”Directivity: 90x40°

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower RMS: 1500 WPeak Power: 3000 WLF: 750 W RMS @4 OhmHF: 375 W RMS @8 OhmCooling: Single fan

ProcessorController: DSP 56 bitAD/DA Converter: 24 bit/48 kHzSystem Presets: Flat EQ, TH EQLimiter: Dual active, Multiband, RMS/Peak, ThermalCrossover Frequency LF-HF: 1070 HzSlope LF-HF: 24 dB/Octave

MechanicsHousing: Multiplex birch plywood - Polyurea paintingAdvanced features: Rotatable front panel (left or right monitor customization)Angles Up: 35°, 55°Handles: 1x left side, 1x right sideWidth: 735 mm (28.9 in)Height: 355 mm (14 in)Depth: 447 mm (17.6 in)Weight: 28.5 kg (62.8 lbs)


An incredible output

A masterpiece of power, quality and Italian design. The DVX DM TH’s monitors are the outcome of the collaboration between some of the most important touring professionals and dBTechnologies R&D staff. As a result of this synergy, these products feature acoustic responses and performances that suit the most prestigious stages of the international scene.

Thanks to an incredibly high SPL, considering its dimensions, the TH is suitable for every circumstance; beside, its frequency response can be regulated trough two preset equalizations: Flat EQ and TH EQ.

The DM12 TH and DM15 TH monitors feature the phase plug technology, providing a correction of the phase and frequency response of the 12’’ (or 15’’) woofer. The results are a coherent horizontal coverage and a great definition of the mid-frequencies.

The stage monitors have a multiplex birch plywood, painted with polyurea, in order to guarantee excellent touring-proof resistance and durability.


DVX DM12 TH ¢ DVX DM15 TH ¢

Power. Unleashed.

Left or right in a flash

The DVX DM TH offers a unique feature that is functional to meet the requirements of the most exigent professionals. In few minutes, you can regulate the monitor’s orientation, rotating the whole frontal panel. The internal geometry of the speaker will be so inverted, moving the horn from the left side to right side, or vice versa. It is now possible to consistently couple two adjacent monitors’ HF horns and avoid comb filters.

You will be able to discern if a monitor is in a right or left configuration in every moment. Despite the grid has been remounted, a logo will indicate the internal disposition of the transducers.

For a vertical usage (like a drumfill system), it is also possible to rotate the monitor’s CD aluminum horn, in order to optimize the speaker’s dispersion and adapting it to the new configuration.

Hidden handles and floor coupling

The innovative positioning of the connectors’ panels makes the wiring even more intuitive. Having the inputs (PowerCon and XLR) on one side and the links on the other one (PowerCon and XLR ), the stage will be orderly, without any cable visible.

Beside, this disposition enables the positioning of the adjacent monitors, without any space between the two boxes. As a result, the coupling effect - as well as the stage look - will be optimized.


DVX D8 HP

Technical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 75 - 20.000 HzFrequency Response [- 3dB]: 100 - 19.000 HzMax SPL: 125 dBHF: 1”Voice Coil HF: Titanium 1.7”Directivity: 90x70°Horn: CD Horn AluminiumRotatable Horn: YESLF: 8”Voice Coil LF: 2”

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower RMS: 400 WPeak Power: 800 W

ProcessorController: DSP 24 Bit/48 kHzSystem Presets: Flat, MonitorLimiter: RMS, Peak. Thermal, MultibandCrossover Frequency MF-HF: 1800 Hz

MechanicsHousing: Multiplex birch plywoodHousing Design: MultifunctionalAngles Up: Monitor use 45°Rigging Points: 6x M8 2x 10mm Quick Release for DTF-bracketWidth: 250 mm (10 in)Height: 425 mm (17 in)Depth: 260 mm (10.4 in)Weight: 9.7 kg (21.38 lbs)

DVX D10 HP


Acoustical dataFrequency Response [- 10dB]: 70 - 20.000 HzFrequency Response [- 3dB]: 85 - 19.000 HzMax SPL: 127 dBHF: 1”Voice Coil HF: Titanium 1.7”Directivity: 90x70°Horn: CD Horn AluminiumRotatable Horn: YESLF: 10”Voice Coil LF: 2.5”



MechanicsHousing: Multiplex birch plywoodHousing Design: MultifunctionalAngles Up: Monitor use 45°Rigging Points: 6x M8 2x 10mm Quick Release for DTF-bracketFlytracks: 3x on top 3x on bottomWidth: 290 mm (11.6 in)Height: 510 mm (20.4 in)Depth: 310 mm (12.4 in)Weight: 15.8 kg (34.83 lbs)


DVX D8 HP ¢ DVX D10 HP ¢ DVX D12 HP ¢ DVX D15 HP ¢

Power. Unleashed.

DVX D12 HPTechnical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 55 - 20.000 HzFrequency Response [- 3dB]: 68 - 19.000 HzMax SPL: 131 dBHF: 1.4”Voice Coil HF: 2.5”Directivity: 60x40°Horn: CD Horn AluminiumRotatable Horn: YESLF: 12”Voice Coil LF: 3”



MechanicsHousing: Multiplex birch plywoodHousing Design: MultifunctionalAngles Up: Monitor use 45°Rigging Points: 6x M10 4x Quick-Release PinsFlytracks: 3x on top 3x on bottomWidth: 370 mm (14.8 in)Height: 625 mm (25 in)Depth: 395 mm (15.8 in)Weight: 27.5 kg (60.63 lbs)

DVX D15 HPTechnical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 49 - 20.000 HzFrequency Response [- 3dB]: 57 - 19.000 HzMax SPL: 132 dBHF: 1.4”Voice Coil HF: Titanium 2.5”Directivity: 60x40°Horn: CD Horn AluminiumRotatable Horn: YESLF: 15”Voice Coil LF: 3.5”



MechanicsHousing: Multiplex birch plywoodHousing Design: MultifunctionalAngles Up: Monitor use 45°Rigging Points: 6x M10 4x Quick-Release PinsFlytracks: 3x on top 3x on bottomWidth: 430 mm (17.2 in)Height: 690 mm (27.6 in)Depth: 450 mm (18 in)Weight: 30.3 kg (66.8 lbs)


Stage Monitor

Unlike conventional multifunctional speakers, the DVX DM is a prograde performer developed specifically for use as a floor monitor.

Optimized to resist feedback even at extremely high levels, it delivers the true-to-nature response and dynamic balance that today’s artists demand.

The integrated digipro® digital power amps deliver the requisite output. The switched mode power supplies with PFC ensure touring rigs get all the juice they need to perform at their peak even when a venue’s mains power is weak and voltage is low.

The onboard controller encompasses an active equalizer, active x-over including phase and time alignment, limiters, and switchable system presets that adapt the monitor’s performance to suit the given application.Made of rugged multiplex and coated with tough black lacquer, the cabinet sets up at two different angles.

Specially designed, rotatable high-frequency horns provide very clean and constant directivity. By rotating the horn, the directivity of high frequencies can adjusted, intepended if the cabinet is mounted horizontally or vertically.

A great and professional feature for fixed install purposes or when a multifuntional speaker is used as stage monitor.

PfCPfCPfC DVX DM28Technical DataSpeaker Type: 2-Way Active Stage Monitor

Acoustical dataFrequency Response [- 10dB]: 60 - 20.000 HzFrequency Response [- 3dB]: 70 - 19.000 HzMax SPL: 130 dBHF: 1”Type HF: Neodymium Compression DriverVoice Coil HF: Titanium 1.75”Directivity: 90x60/40°Horn: AsymmetricalLF: 2x8”Type LF: NeodymiumVoice Coil LF: 2.5”

AmplifierAmp Technology: Digipro®Amp Class: Class DPower RMS: 750 WPeak Power: 1500 WCooling: Convection

ProcessorController: DSP 24 Bit/48 kHzSystem Presets: Flat, MonitorLimiter: RMS, Peak. Thermal, MultibandCrossover Frequency MF-HF: 1600 HzSlope MF-HF: 24 dB/Octave

MechanicsHousing: Multiplex birch plywoodHousing Design: Low Profile MultifunctionalAngles Up: 30°, 60°Width: 480 mm (19.2 in)Height: 265 mm (10.6 in)Depth: 418 mm (16.72 in)Weight: 14 kg (30.86 lbs)


DVX DM12Technical DataSpeaker Type: 2-Way Active Stage Monitor

Acoustical dataFrequency Response [- 10dB]: 55 - 20.000 HzFrequency Response [- 3dB]: 68 - 19.000 HzMax SPL: 131 dBHF: 1.4”Type HF: Neodymium Compression DriverVoice Coil HF: Titanium 2.5”Directivity: 40x90°Horn: CD Horn AluminiumRotatable Horn: YESLF: 12”Type LF: NeodymiumVoice Coil LF: 3”



MechanicsHousing: Multiplex birch plywoodHousing Design: MultifunctionalAngles Up: 35°, 55°Rigging Points: 6x M10 4x Quick-Release PinsWidth: 660 mm (14.8 in)Height: 305 mm (25 in)Depth: 378 mm (15.8 in)Weight: 17.5 kg (55.12 lbs)

DVX DM15Technical DataSpeaker Type: 2-Way Active Stage Monitor

Acoustical dataFrequency Response [- 10dB]: 50 - 20.000 HzFrequency Response [- 3dB]: 59 - 19.000 HzMax SPL: 132 dBHF: 1.4”Type HF: Neodymium Compression DriverVoice Coil HF: Titanium 2.5”Directivity: 60x40°Horn: CD Horn AluminiumRotatable Horn: YESLF: 15”Type LF: NeodymiumVoice Coil LF: 3.5”



MechanicsHousing: Multiplex birch plywoodHousing Design: Low Profile MultifunctionalAngles Up: 35°, 55°Rigging Points: 6x M8Width: 734 mm (29.36 in)Height: 338 mm (13.52 in)Depth: 442 mm (17.68 in)Weight: 21 kg (46.3 lbs)

DVX DM28 ¢ DVX DM12 ¢ DVX DM15 ¢

Power. Unleashed.

Digital Active Speakers & Sub

48 SIGMA Digital Active Speakers & Subs

SIGMA S215SIGMA S115SIGMA S118

Quasi 3-Way Active Speakers

Quasi 3-Way Active Speaker 2 x 15”/1.4”, 1400 W

Many venues demand high SPL and low-ranging response. However, a fullrange enclosure is often the only viable option for some of these applications. Loaded with two 15” woofers designed to handle considerable loads, the S215 is the solution of choice for such scenarios.

H.E.T™ Housing

Exceptionally light and remarkably rugged Developed by dBTechnologies, H.E.T (Hyprid Enclose Technology) housings are made of premium quality multiply wood with a hardwearing, durable, and scratch-resistant coating.

Tough, rugged plastic side panels provide excellent protection for the housing as well as integrated grips and electrical connectors for utmost handling convenience and safety.

Quasi 3-Way Active Speakers

S118 + S215

SIGMA S215Technical DataSpeaker Type: Quasi 3-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 42 - 20.000 HzMax SPL: 139 dBHF: 1.4”Type HF: Titanium Compression driverVoice Coil HF: 2.8”Directivity: 60 x 40°Horn: CD HornLF: 2x15” (with phase plug)Voice Coil LF: 3”

AmplifierAmp Technology: Digipro® G2Amp Class: Class DPower PRG: 1400 WPeak Power: 2800 W

ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, BoostLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency MF-HF: 1100 HzSlope MF-HF: 24 dB/Octave

MechanicsHousing: Multiplex with H.E.T coating, reinforcedWidth: 509 mm (20.36 in)Height: 1215 mm (48.6 in)Depth: 533 mm (21.32 in)Weight: 50 kg (110.23 lbs)

49SIGMA Digital Active Speakers & Subs

50 SIGMA Digital Active Speakers & Subs

2-Way Active Speaker 15”/1.4”, 1000 W

This active 15”/1.4” two-way system is musicians and DJs’ first choice in a fullrange FOH speaker. The S115’s reach is remarkable thanks to its assertive midrange, prominent top end, and constant directivity at high sound pressure levels.

Digital processing for professional sound through and through

The integrated digital sound processor allows the final touches to be made to your sound, rounding it out to a warm, natural tone with powerful bass and sparkling high frequencies.

A variety of signal processing presets allows you to achieve your perfect sound with the minimum of fuss.

All in all, the SIGMA series is a fully integrated range of products for professional use, setting a new standard in the field of live amplification and quite unique amongst its competitors.

2X S118 + S115

SIGMA S115Technical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 46 - 20.000 HzMax SPL: 133 dBHF: 1.4”Type HF: Titanium Compression driverVoice Coil HF: 2.8”Directivity: 60 x 40°Horn: CD HornRotable Horn: YESLF: 15”Voice Coil LF: 3”


ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, BoostLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency MF-HF: 1100 HzSlope MF-HF: 24 dB/Octave


51SIGMA Digital Active Speakers & Subs

Engineered for portability

Musicians and DJs who provide their own backline need a reliable sound system that sets up in a flash and is easily tweaked without a lot of fuss It has to respond directly and predictably to every mix.

Live acts need resilient speakers with lots of load handling capacity and the staying power necessary to operate at high levels for hours on end. The rig has to deliver tight, punchy bass response that gets people dancing as well as assertive mids and a sparkling top end.

And it has to be easy to handle. The SIGMA line does all this and more.

Active Subwoofer 18”, 1400 W

The S118 is a powerful, active 18” subwoofer housed in a bassreflex enclosure. Designed specifically to provide low-frequency support for highperformance S115 fullrange speakers, it packs a mighty low-ranging bass punch. S118 and S115 enclosures have the same width so they are easily stacked to set up professional-grade PA systems.

SIGMAS118

Bd TECHNOLOGIES

TECHNOLOGIES

Bd

SIGMAS118

Bd TECHNOLOGIES

TECHNOLOGIES

Bd

S118 + S115

SIGMA S115 ¢ SIGMA S118 ¢

A New Way For Professional Sound

SIGMA S118Technical DataSpeaker Type: Active Bassreflex Subwoofer

Acoustical dataFrequency Response [- 10dB]: 32 - 110 HzMax SPL: 134 dBHF: 1.4”Directivity: omnidirectionalLF: 18”Voice Coil LF: 4”


ProcessorController: Analog/DigitalLimiter: Peak, RMS, ThermalCrossover Frequency: 80-100 Hz (Switchable)LF-Xover out slope: 24 dB/Octave

Input Signal Input: XLRInput Sensitivity [dBu]: -3dBuSignal Output: 1x XLR X-Over Out/ Link Out


Digital Active Speakers & Monitors

FLEXSYS F8FLEXSYS F10FLEXSYS F12FLEXSYS F15FLEXSYS F212FLEXSYS F315FLEXSYS FM8FLEXSYS FM10FLEXSYS FM12

52 FLEXSYS Digital Active Speakers & Monitors

2-Way ActiveSpeakers & Monitors2-Way Active Speakers & Monitors

FLEXSYS F8Technical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 75 - 20.000 HzFrequency Response [- 3dB]: 90 - 19.000 HzMax SPL: 121 dBHF: 1”Type HF: Neodymium compression driverDirectivity: 90/40 x 60°Horn: Asymmetrical CD Horn LF: 8”

AmplifierAmp Technology: Digipro®Amp Class: Class DPower PRG: 400 WPeak Power: 800 W

ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, ProcessedLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency LF-HF: 2100 HzSlope MF-HF: 24 dB/Octave

MechanicsHousing: MultiplexAngles Up: Monitor use 40°Width: 260 mm (10.4 in)Height: 420 mm (16.8 in)Depth: 260 mm (10.4 in)Weight: 9.5 kg (20.9 lbs)


Acoustical dataFrequency Response [- 10dB]: 75 - 20.000 HzFrequency Response [- 3dB]: 90 - 19.000 HzMax SPL: 121 dBHF: 1”Type HF: Neodymium compression driverDirectivity: 90/40 x 60°Horn: Asymmetrical CD Horn LF: 8”


ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, ProcessedLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency LF-HF: 2100 HzSlope MF-HF: 24 dB/Octave


53FLEXSYS Digital Active Speakers & Monitors



Acoustical dataFrequency Response [- 10dB]: 65 - 20.000 HzFrequency Response [- 3dB]: 75 - 19.000 HzMax SPL: 127 dBType HF: 1” Compression driverDirectivity: 90 x 40°Horn: CD HornRotable Horn: YESLF: 12”


ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, ProcessedLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency LF-HF: 1300 Hz



Acoustical dataFrequency Response [- 10dB]: 55 - 20.000 HzFrequency Response [- 3dB]: 60 - 19.000 HzMax SPL: 128 dBType HF: 1” Compression driverDirectivity: 90 x 40°Horn: CD HornRotable Horn: YESLF: 15”



MechanicsHousing: MultiplexAngles Up: Monitor use 45°Width: 430 mm (16.9 in)Height: 680 mm (26.7 in)Depth: 430 mm (16.9 in)Weight: 20 kg (44.09 lbs)


FLEXSYS F12 ¢ FLEXSYS F15 ¢ FLEXSYS F212 ¢ FLEXSYS F315 ¢

Adapts To Anything

FLEXSYS F212Technical DataSpeaker Type: Quasi 3-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 50 - 20.000 HzFrequency Response [- 3dB]: 65 - 19.000 HzMax SPL: 132 dBType HF: 1” neodymium compression driverDirectivity: 60 x 40°Horn: CD HornRotable Horn: YESLF: 2x12” (with phase plug)

AmplifierAmp Technology: Digipro®Amp Class: Class DPower RMS: 1000 WPeak Power: 2000 W

ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, ClusteredLimiter: Dual Active Peak, RMS, ThermalCrossover Frequency LF-HF: 1800 Hz

MechanicsHousing: MultiplexWidth: 360 mm (14.4 in)Height: 930 mm (37.2 in)Depth: 500 mm (20 in)Weight: 31.5 kg (69.45 lbs)

FLEXSYS F315Technical DataSpeaker Type: Quasi 3-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 47 - 20.000 HzFrequency Response [- 3dB]: 60 - 19.000 HzMax SPL: 131 dBType HF: 1” compression driverDirectivity: 90 x 40°Horn: CD HornRotable Horn: NOMF: 6.5”Type MF: HornloadedLF: 15”

AmplifierAmp Technology: Digipro®Amp Class: Class DPower RMS: 1000 WPeak Power: 2000 W


MechanicsHousing: MultiplexWidth: 440 mm (17.3 in)Height: 880 mm (34.6 in)Depth: 500 mm (20 in)Weight: 31 kg (68.34 lbs)


Active Coaxial Stage Monitors

A revolution in live sound reinforcement, the Flexsys FM Series comprises a range oftailored monitoring solutions featuring innovative technologies.

Housed in compact multifunctional enclosures, these units raise the bar for intelligibility, definition, and ease of use. They are the discerning user’s first choice when nothing less than the best on-stage monitoring will do.

Remarkably resistant to feedback

These newly developed coaxial speakers deliver extraordinary sound quality that defies the compact design of their housings.

Engineered for precise directivity and uniform throw patterns, they provide the same satisfying audio experience at every listening position, with far greater resistance to feedback.

DSP with eight presets for easy adaptation to varying requirements

FM Series monitors feature a powerful DSP that offers a crossover, digital multiband limiters, phase correction, and eight variable presets that serve to adapt the monitor to the varying demands of vocalists, instrumentalists, and audio playback applications.

PACK

FLEXSYS FM8Technical DataSpeaker Type: 2-Way Active Coaxial Stage Monitor

Acoustical dataFrequency Response [- 3dB]: 77 - 20.000 HzMax SPL: 117 dBHF: 1”Type HF: compression driverHorn: CD HornLF: 8”

AmplifierAmp Technology: Digipack™Amp Class: Class DPower PRG: 200 WPeak Power: 400 W

ProcessorController: DSP 24bit/48kHzSystem Presets: 8 presetsLimiter: Dual Active Peak, RMS, Thermal

MechanicsHousing: Multiplex with H.E.T coating, reinforcedHousing Design: Multifunctional, Low ProfileAngles Up: 2 monitor angles°Width: 280 mm (11.2 in)Height: 290 mm (11.6 in)Depth: 410 mm (16.4 in)Weight: 9.8 kg (21.61 lbs)






MechanicsHousing: Multiplex with H.E.T coating, reinforcedHousing Design: Multifunctional, Low ProfileAngles Up: 2 monitor angles°Width: 370 mm (14.8 in)Height: 290 mm (11.6 in)Depth: 410 mm (16.4 in)Weight: 12.8 kg (28.22 lbs)





MechanicsHousing: Multiplex with H.E.T coating, reinforcedHousing Design: Multifunctional, Low ProfileAngles Up: 2 monitor angles°Width: 450 mm (19.6 in)Height: 290 mm (11.6 in)Depth: 410 mm (16.4 in)Weight: 17 kg (37.48 lbs)

FLEXSYS FM8 ¢ FLEXSYS FM10 ¢ FLEXSYS FM12 ¢

Adapts To Anything

58 OPERA BLACK LINE Professional Active Speakers

Professional Active Speakers

OPERA 710 BLOPERA 712 BLOPERA 715 BLOPERA 910 BLOPERA 912 BLOPERA 915 BL

Professional Active SpeakersProfessional Active Speakers

The new Opera Black Line series treasures all the tecnological innovations of the Opera DX family with an original Full Grille look which allows greater air volume inside the box, benefiting low frequency response.

The new and captivating front is backed up by the revision of the controls’ firmware which optimizes the system, offering the maximum for a polypropylene reinforced speaker.

Available in two series, 700 or 900 watt with a 12 or 15 inches woofer, for every need.

¢ Engineered to exceed expectations

¢ Two different equalizations

¢ Metal steel grille 1.2 mm

¢ Foam on backside

¢ Reinforced polypropylene

¢ 3 Handles: 2 on the side and 1 on top

¢ Asymmetrical Horn

¢ Monitor Angle 43°

BdTECHNOLOGIES

BTECHNOLOGIES

59OPERA BLACK LINE Professional Active Speakers

60 OPERA BLACK LINE Professional Active Speakers

OPERA710 BL


Acoustical dataFrequency Response [- 10dB]: 61 - 20.000 HzFrequency Response [- 3dB]: 70 - 19.000 HzMax SPL: 127 dBHF: 1”Type HF: Compression driverDirectivity: 80/65 x 60°Horn: Asymmetrical CD HornLF: 10”

AmplifierAmp Technology: digipro®G2Amp Class: Class DPower PRG: 700 Watt

ProcessorController: DSP 24bit/48kHzSystem Presets: Flat, ProcessedLimiter: Dual Active Peak, RMS, Thermal

MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 343 mm (13.72 in)Height: 553 mm (22.12 in)Depth: 304 mm (12.16 in)Weight: 11.6 kg (24.25 lbs)

OPERA712 BL






OPERA715 BL






Series

61OPERA BLACK LINE Professional Active Speakers

OPERA910 BL






OPERA912 BL





MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 432 mm (17.28 in)Height: 655 mm (26.2 in)Depth: 353 mm (14.12 in)Weight: 18.9 kg (41,66 lbs)

OPERA915 BL





MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 432 mm (17.28 in)Height: 655 mm (26.2 in)Depth: 353 mm (14.12 in)Weight: 19.3 kg (42,54 lbs)

OPERA 710 BL ¢ OPERA 712 BL ¢ OPERA 715 BL ¢ OPERA 910 BL ¢ OPERA 912 BL ¢ OPERA 915 BL ¢

All Black For A Legend

Professional Active Speakers

OPERA 508 DXOPERA 510 DXOPERA 512 DXOPERA 515 DXOPERA 710 DXOPERA 712 DXOPERA 715 DXOPERA 910 DXOPERA 912 DXOPERA 915 DX

62 OPERA DX Professional Active Speakers

Professional Active SpeakersProfessional Active Speakers

dBTechnologies has added another chapter to the celebrated Opera Series’ 12-year success story: welcome to the new Opera DX line. Our engineers have again succeeded in treating users to state-of-the-art features and functions unrivalled in this price range.

The digipro® G2 digital power amps, DSPs and asymmetrical horns have been tuned to deliver peerless performance. And with that, the three Opera DX 500, 700, and 900 lines provide a tailored solution for every sound reinforcement application.

The secret to the extraordinary performance of products bearing the dBTechnologies brand is the custom design effort that went into each component.These units outperform their rivals because almost every component was developed from the bottom up for the given product.

All components in an OPERA system are manufactured in our plants or sourced from trusted suppliers that we have relied on for many years, with dBTechnologies’ quality assurance experts rigorously monitoring the production process.

Final assembly takes place at our home base in Bologna, Italy, where we burn in speakers and put every enclosure to the test for several hours before it ships.

This painstaking attention to detail has made the OPERA series one of the most successful and most frequently copied speaker systems. dBTechnologies leverages leading-edge technologies and proven manufacturing processes to continue making – in Italy rather than offshore - quality products that deliver unmatched performance for the price.

63OPERA DX Professional Active Speakers


OPERA 508 DXTechnical DataSpeaker Type: 2-Way Active Speaker


AmplifierAmp Technology: digipro®Amp Class: Class DPower PRG: 400 Watt


MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 300 mm (12 in)Height: 484 mm (19.36 in)Depth: 284 mm (11.36 in)Weight: 7.9 kg (15.43 lbs)





MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 343 mm (13.72 in)Height: 553 mm (22.12 in)Depth: 304 mm (12.16 in)Weight: 9.8 kg (21.61 lb)

DX












OPERA 508 DX ¢ OPERA 510 DX ¢ OPERA 512 DX ¢ OPERA 515 DX ¢

A Sound Out Of The Ordinary


OPERA 700 DX

Advanced Active Technology

Equipped with 700-watt digipro®G2 power amps, high-quality transducers, and modern DSPs, every 700 Series sound system delivers the kind of stellar audio performance that sets the stage for success. And that makes it the perfect companion for the discerning performer.






DX












OPERA 710 DX ¢ OPERA 712 DX ¢ OPERA 715 DX ¢



OPERA 900 DX

High-end Audio Performance

It doesn’t get any better than this: the OPERA 900 is not only the flagship of the line, it is also the reference standard for the entire class.

Its 900-watt digipro®G2 power amp comes with a SMPS and an onboard DSP. Paired with a premium woofer and a high-end driver sporting a 1.4” diaphragm, it packs a powerful low-frequency punch and comjures crystal-clear top end. Its range is nothing short of remarkable.






DX

69OPERA DX Professional Active SpeakersDX

OPERA 910 DX ¢ OPERA 912 DX ¢ OPERA 915 DX ¢












2-Way Active Speakers

CROMO 8+CROMO 10+CROMO 12ClubCROMO 12+CROMO 15+

70 CROMO 2-Way Active Speakers

2-Way Active Speakers 2-Way Active Speakers

The Cromo+ Series offers powered loudspeakers with modern digital technology for first time users, without having to miss out on professional features and outstanding audio performance.

The Cromo+ Series features the ultra compact digipack digital power amplifiers, based on the successful digipro® amp technology for maximum efficiency.

The integrated digital sound processor (DSP) caters for perfect sound calibration of the individual speaker components. All in all, true professional features, unique in its class and setting new standards in entry level speaker lines.

The compact multifunctional housing of the Cromo+ speaker line, with asymetrical CD horns, can be used for many different applications, such as live events, a public address system for a singer, for monitoring purposes on stage, or for fixed installations in Bars or lounges.

All Cromo+ models have a microphone input on XLR and jack sockets for maximum flexibility.

CROMO 8+Technical DataSpeaker Type: 2-Way Active Speaker


AmplifierAmp Technology: Digipack™Amp Class: Class DPower PRG: 300 Watt



PACK

71CROMO 2-Way Active Speakers

72 CROMO 2-Way Active Speakers





MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Width: 320 mm (12.8 in)Height: 508 mm (20.32 in)Depth: 297 mm (11.88 in)Weight: 12 kg (26.46 lbs)

CROMO 12ClubTechnical DataSpeaker Type: 2-Way Active Speaker





73CROMO 2-Way Active Speakers











CROMO 10+ ¢ CROMO 12Club ¢ CROMO 12+ ¢ CROMO 15+ ¢

More Power To Your Power Amp

74 SUB Subwoofers

Active Subwoofers

SUB 15HSUB 18HSUB 28DSUB 12DSUB 05DSUB 808DSUB 15DSUB 18D

74 SUB Subwoofers

Active Class-D SubwoofersActive Class-D Subwoofers

¢ H.E.T™ (Hybrid Enclosure Technology)

¢ Digipro™ and Digipack™ digital amplifiers

¢ Double Sub Preset EQ

¢ Stereo I/O for easy setup

¢ Delay on-board (Sub H Series)

dBTechnologies is well known for its remarkable active subwoofers with outstanding performance, combining powerful and precise subsonic reproduction with excellent tonal quality.

All powered subwoofers are equipped with an active crossover, which can operate in Mono or Stereo mode, providing all combinations for applications with one or more subwoofers.

With digital power amps lightening the load,

toting and setting up these bins is an exercise in convenience. This handling ease is an asset users are sure to value, particularly those frequently tasked to set up and tear down systems for live applications.

Developed by dBTechnologies, H.E.T™ housings are made of premium-quality multiply wood with a hardwearing, durable, and scratch-resistant coating. Tough, robust plastic side panels provide excellent protection for the housing as well as integrated grips and electrical connectors for utmost handling convenience and safety.

75SUB Subwoofers

76 SUB Subwoofers

SUB 15HTechnical DataSpeaker Type: Semi Horn-loaded Active Subwoofer

Acoustical dataFrequency Response [- 10dB]: 35 - 150 HzMax SPL: 133 dBDirectivity: omnidirectionalLF: 15”Voice Coil LF: 3”

AmplifierAmp Technology: Digipro G3™Amp Class: Class DPRG Power: 1000 WPeak Power: 1400 WPower supply: 700 W SMPS with PSU Auto-range (110V~ and 220V~)

ProcessorController: DSP 56 bitAD/DA Coverters: 24 bit/48 kHzLimiter: Dual Active, Multiband, RMS/Peak, ThermalCrossover Frequency: 90 or 120 Hz, 24dB/OctaveControls: X-Over frequency selection Delay switch up to 4.5ms Phase inversion switch Outputs mode switch (Link/X-over) Mini-USB type “B” port (service data)

InputsSignal Input: 2x XLRSignal Output: 2x XLR X-Over Out/Link Out

MechanicsHousing: Birch plywood, Black PVC coverWidth: 524 mm (20.6 in)Height: 511 mm (20.1 in)Depth: 695 mm (27.4 in)Weight: 31.5 kg (69.4 lbs)

Sub 15H & Sub 18H

dBTechnologies’ new subwoofers H Series offer remarkable specifications and user-friendliness.

With 1000W (1400W Peak Power) and a high-performance 15” woofer with 3” coil, the Sub 15H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size.

Whenever a lower extension is required, the perfect choice is the new Sub 18H, equipped with a 1500W (2000W Peak Power) power amplifier and a high-performance 18” woofer with 4” coil.

Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound.

Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues.

The new 15H sub offers stereo inputs with selectable link or crossover outputs, a crossover frequency switch at 90 or 120 Hz, a phase inversion switch and built-in delay up to 4.5 ms (adjustable in 0.5 ms steps).

The delay helps you to improve the correct coupling with the whole line-up of dB Technologies full-range speakers, and to make advanced subwoofer configurations without the help of any external processor (Cardioid or End-Fire or Straight Line).

As a matter of fact, the built-in features - variable crossover frequency, phase and delay - let the new Sub H Series be compatible with any other speaker of our lines.

77SUB Subwoofers

SUB 15H ¢ SUB 18H ¢

Exceptionally Light And Remarkably Rugged

SUB 18HTechnical DataSpeaker Type: Semi Horn-loaded Active Subwoofer


AmplifierAmp Technology: Digipro G3™Amp Class: Class DPRG Power: 1500 WPeak Power: 2000 WPower supply: 1000 W SMPS with PSU Auto-range (110V~ and 220V~)

ProcessorController: DSP 56 bitAD/DA Coverters: 24 bit/48 kHzLimiter: Dual Active, Multiband, RMS/Peak, ThermalCrossover Frequency: 90 or 120 Hz, 24dB/OctaveControls: X-Over frequency selection Delay switch up to 4.5ms Phase inversion switch Outputs mode switch (Link/X-over) Mini-USB type “B” port (service data)


MechanicsHousing: Birch plywood, Black PVC coverWidth: 524 mm (20.6 in)Height: 711 mm (28 in)Depth: 695 mm (27.4 in)Weight: 41.4 kg (91.3 lbs)

The subs also feature a mini USB Type-B port to update system firmware and retrieve a telemetry log file that provides information on abnormal events, usage time and amplifier status.

The latest-generation digital amplifier Digipro™ G3 ensures excellent performance and low energy consumption thanks to its highly efficient, yet very lightweight system. The auto-range digital power supply allows it to operate both on 110V~ and on 220V~.

The new 28/56 Bit DSP with 24 Bit/48KHz A/D conv. provides sound performance above all expectations and perfect system control even under the most extreme operating conditions, thanks to its advanced limiting functions.

The PVC faced birch plywood speaker box is extra resistant also thanks to polypropylene edges that protect it from scratching or impacts during transport. This unique Hybrid Enclosure Technology offers outstanding strength and durability, making your speaker truly road-ready, with their exclusives Aluminum heavy-duty handles.

The M20 threaded mount on the top end of the box permits any type of full-range speaker to be installed using a standard pole with M20 thread.

DS2-S mini pole is also available as an option to adapt any dB Technologies speaker to 15H and 18H subs.

78 SUB Subwoofers

Active 2x8” Subwoofer

We engineered the SUB 28 D to provide low-end reinforcement for compact satellites such as dBTechnologies L and K Series speakers.

This light and lean enclosure houses two 8” woofers driven by a 800W digital power amp and an onboard digital stereo x-over. Setting up mono and stereo satellite systems is a piece of cake with this amp and DSP on board.

290 mm 505 mm

520

mm

SUB 28DTechnical DataSpeaker Type: Active Bandpass Subwoofer

Acoustical dataFrequency Response [- 10dB]: 45 - 150 HzMax SPL: 125 dBDirectivity: omnidirectionalLF: 2x8”

AmplifierAmp Technology: Digipack™Amp Class: Class DPeak Power: 800 W

ProcessorController: DSP 24 bit/48 kHzPhase: 0, 180°Limiter: Dual Active LimiterCrossover Frequency: 100 Hz, 24dB/OctaveSystem Presets: Flat, Boost

InputsSignal Input: 2x XLRSignal Output: 2x XLR X-Over Out/Link Out)

MechanicsHousing: Multiplex with H.E.T coating, reinforcedWidth: 290 mm (11.6 in)Height: 520 mm (20.8 in)Depth: 505 mm (20.2 in)Weight: 19.5 kg (42.99 lbs)

PACK

79SUB Subwoofers

Active 12” Subwoofer

Equipped with a 800W digital power amp, the SUB 12 D is the perfect complement to 8” or 10” speaker systems for users looking to set up small but assertive satellite systems that deliver exceptional performance.

Featuring compact dimensions and the innovative H.E.T™ housing, this unit is easy to transport and set up. Connecting satellites is an exercise in convenience thanks to an integrated digital crossover (DSP) with adjustable frequency.

390 mm505 mm

520

mm

SUB 28D ¢ SUB 12D ¢



Acoustical dataFrequency Response [- 10dB]: 40 - 150 HzMax SPL: 127 dBDirectivity: omnidirectionalLF: 12”





PACK

80 SUB Subwoofers


The 800W SUB 05D is an excellent choice for extending 10” and 12” loudspeakers’ range. It packs the kind powerful low-end punch necessary for contemporary sounds and pumps out plenty of SPL for live applications.

The unit connects easily and quickly courtesy of a built-in digital stereo crossover (DSP) with boost selector and phase inversion switch.

Housed in the newly developed H.E.T™ enclosure featuring integrated control features, this rugged cabinet tough enough to stand up to the rigors of transport.

490 mm 615 mm

520

mm






MechanicsHousing: Multiplex with H.E.T coating, reinforcedWidth: 490 mm (19.6 in)Height: 520 mm (20.5 in)Depth: 615 mm (24 in)Weight: 29.5 kg (65.04 lbs)

PACK

81SUB Subwoofers


Sporting an 18” woofer loaded to a bandpass housing and an onboard 1000W digital power amp, the SUB 808D delivers a low-ranging bass foundation to provide precisely the low-end support 12” and 15” speaker systems need.

Such rigs are easily set up, connected and configured thanks to the built-in digital stereo x-over (DSP) with phase reverse switch, and integrated control features.

The H.E.T™ enclosure is a tough, road-worthy housing that keeps the components inside well protected.

615 mm 640 mm

520

mm







InputsSignal Input: 2x XLRSignal Output: 2x XLR Link Out/X-Over Out

MechanicsHousing: Multiplex with H.E.T coating, reinforcedWidth: 640 mm (25.6 in)Height: 520 mm (20.8 in)Depth: 615 mm (24.6 in)Weight: 34.8 kg (74.96 lbs)

PACK

82 SUB Subwoofers

PUSH

ON MUTE SGNL IM

PHASE

90Hz

8 0dBMono

OUT 1 OUT 2

120Hz 0°180°

XOVER

SUB-WOOFERLEVEL

LINKXOVER

BALANCEDINPUT 1MONO

BALANCEDINPUT 2

0dBStereo

PUSH

“CAUTION”

DO NOT REMOVE COVERTO PREVENT ELECTRICAL SHOCK

“AVIS”

NE PAS OUVRIRRISQUE DE CHOCH ELECTRIQUE

LINKMAINS INPUT

MAINS FUSE

ON

OFF

ON

OFF

100-120V~ 50-60Hz 220-240V~ 50-60Hz

(T8A 250V~)

(T4A 250V~)Internal voltage setup

436 mm 600 mm

600

mm


Loaded with 15” woofer and featuring band-pass cabinet, the SUB 15D is a remarkably agile and responsive speaker system.

Driven by an onboard digipro® digital power amp, this bin packs a powerful low-end punch perfect for rendering kick drums with high SPL.




ProcessorController: DigitalPhase: 0, 180°Limiter: RMS, Peak, thermalCrossover Frequency LF-HF: 90, 120 HzLF X-over out slope: 24 dB/Octave

InputsSignal Input: 2x XLRSignal Output: 2x XLR X-Over Out/ Link Out

MechanicsHousing: Multiplex, birch plywoodPole Mount: M20Width: 436 mm (17.44 in)Height: 600 mm (24 in)Depth: 600 mm (24 in)Weight: 32 kg (70.55 lbs)

PfCPfCPfC

83SUB Subwoofers


The SUB 18D is the first-choice bass bin for users seeking powerful punch and ultra low-end response. Fine-tuned to augment and amplify the highpower 18” woofer’s audio performance, this custom engineered bandpass enclosure outperforms conventional bass-reflex designs, achieving higher peak levels.

PUSH

ON MUTE SGNL IM

PHASE

90Hz

8 0dBMono

OUT 1 OUT 2

120Hz 0°180°

XOVER

SUB-WOOFERLEVEL

LINKXOVER

BALANCEDINPUT 1MONO

BALANCEDINPUT 2

0dBStereo

PUSH

MAINS LINK

ACTIVE P.F.C.

MAINSFUSE

FULL RANGE MAINS INPUT 100-240V 50-60Hz~

1000W MAX

OUTPUT220-240V MAX 15A100-120V MAX 10A

~~

220-240V (T5A 250V)100-120V (T10A 250V)

~~

“CAUTION”

DO NOT REMOVE COVERTO PREVENT ELECTRICAL SHOCK

“AVIS”

NE PAS OUVRIRRISQUE DE CHOCH ELECTRIQUE

530 mm600 mm

700

mm






ProcessorController: DigitalPhase: 0, 180 °Limiter: Dual Active LimiterCrossover Frequency LF-HF: 90, 120 HzLF X-over out slope: 24 dB/Octave

InputsSignal Input: 2x XLRSignal Output: 2x XLR X-Over Out/ Link Out

MechanicsHousing: Multiplex, birch plywoodPole Mount: 2x M20Width: 530 mm (21.2 in)Height: 700 mm (28 in)Depth: 600 mm (24 in)Weight: 44 kg (97 lbs)

PfCPfCPfC

84 READY 4 Battery-powered Bi-amp Speaker

Battery-powered Bi-amp Speaker

¢ Self-powered speaker

¢ Back panel for fast access to the battery

¢ Digital Class-D amplifier

¢ SMPS with auto-range (works at 110V~ or 220V~)

¢ UHF Radio receiver built-in

¢ XLR/Jack TRS/RCA inputs

¢ USB port (for mp3 media players)

¢ Bluetooth Receiver (optional)

¢ Mix Output

¢ Ultra-bright OLED screen for user interface

85READY 4 Battery-powered Bi-amp Speaker

READY 4Technical DataSpeaker Type: Bi-amp battery-powered speaker

Acoustical dataFrequency Response [- 10dB]: 70 Hz - 20.000 kHzMax SPL: 120 dBHF: 1”Voice Coil HF: 1”Directivity: 80/65 x 60°Horn: Asymmetrical CD HornLF: 10”Voice Coil LF: 1.5”

AmplifierAmp Technology: digipro®G2Amp Class: Class D High efficiency power amplifierPeak Power: 200 WControls: 1x OLED display with 4 push buttons 2x Audio signal monitoring leds 1x USB type “B” port (service data) 1x power supply source switch (external, internal or OFF)Cooling: convectionMain PSU: 45 W Full-range SMPS (90-264 V~) for full operation and battery chargingInternal Battery PSU: 12V - 7Ah lead acid battery (user-replaceable)External 15V PSU: DC conn. for 15V external power supply

ProcessorController: DSP 56 bitAD/DA Converter: 24bit/48kHzCrossover Frequency LF-HF: 1950 HzSlope LF-HF: 24 dB/OctaveLimiter: Dual Active, Multiband, RMS/Peak, ThermalSpecial features: Digital battery charger Battery management and power saving functions

InputsMaster Channel: 1x Master volume potentiometerMic/Line Channel: 1x Combo (XLR/jack) input 1x Mic/Line volume control 1x Mic/Line selection switchWireless Mic Channel: 1x 16ch. UHF wireless built-in receiver 1x Wireless receiver volume controlMedia Channel: 2x RCA unbalanced inputs 1x Bluetooth™ built-in receiver (optional) 1x USB type “A” port for media files (MP3/WMA/AAC) 1x RCA/USB/Bluetooth™ volume controlMix output: 1x 6.3” unbalanced jack mix Out

MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Handles: 1x top sideWidth: 343 mm (13.72 in)Height: 553 mm (22.12 in)Depth: 304 mm (12.16 in)Weight: 11.3 kg (25 lbs)

Battery-powered Bi-amp SpeakerBattery-powered Bi-amp Speaker

Technology on the move

After the great success of the Mobile 110 sport speaker, dBTechnologies is introducing Ready 4, a high-performance and versatile speaker that will set a new standard for portable PA systems.

Featured with multiple power supply options (battery/power mains), the new Ready 4 can be used in any situation. The battery ensures several hours of autonomy. An exhausted battery can be quickly replaced with a charged battery through the back removable panel. The speaker can be connected to 220 V or 110 V AC power, thanks to a SMPS with auto-range, or a 15 V power supply via an optional external adapter.

Based on the Black Line series box, the new Ready 4 features a stylish contemporary design that will suit any situation.

An optional Bluetooth board, a MIX OUT output and a bright multi-function OLED display enhance the excellent potential of the new Ready 4, placing it right at the top of its category.

MINISeries

MINIBOX L160DMINIBOX K300MINIBOX K162MINIBOX K70

86 MINIBOX Compact Active Speakers

Compact Active Speakers

Compact Active SpeakersCompact Active Speakers

Active Speakers

A powerful yet surprisingly light cabinet, the remarkably compact L160D offers a variety of connection options to provide convenient sound reinforcement for multimedia applications.

Paired with a DSP, the two 5” phase-corrected loudspeakers deliver astonishingly high sound pressure levels for their size and an amazingly transparent and articulate sonic image.

The multifunctional housing offers wall-mount fixing points for permanent installation and a pole mount for portable use.

WB03 WB11

MINIBOX L160DTechnical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 70 - 20.000 HzMax SPL: 116 dBHF: 1”Type HF: Dome Tweeter, coaxialDirectivity: 85 x 75°LF: 2x5”

AmplifierAmp Technology: digipro®Amp Class: Class DPower PRG: 160 WCooling: Convection

ProcessorController: DSP 24bit/48kHzSystem Presets: 8Limiter. Dual Active Peak, RMS, ThermalSlope MF-HF: 24 dB/Octave

InputsSignal Input: 1x XLR Line In/Mic 1x 6.3mm phone jack 1x RCA cinch AUX with volume ctrlMicrophone Input: YesSignal Output: 1x 6.3mm phone jackPower Socket: VDEVoltage Range: 110-120 - 220-240 V

MechanicsHousing: Polyporpylen PPAngles Up: 60° for monitor use°Rigging Points: 2x M5 on side 2x M5 on bottom for accessoriesAccessory: WB03, SN120Width: 200 mm (8 in)Height: 335 mm (13.4 in)Depth: 220 mm (8.8 in)Weight: 5.2 kg (11.46 lbs)

PACK

87MINIBOX Compact Active Speakers

88 MINIBOX Compact Active Speakers

Active Speakers

The most powerful compact cabinet in its class, the K300 is chock-full of innovative technologies.

Housed in an ultra compact enclosure, its digipro® bi-amped digital power amp delivers high performance and sound pressure levels. The 1“ HF driver renders midrange frequencies with pinpoint precision, and its response is richly detailed.

The integrated DSP further enhances clarity and accuracy, and protects components using digital limiters.

MINIBOX K300Technical DataSpeaker Type: 2-Way Active Speaker

Acoustical dataFrequency Response [- 10dB]: 70 - 20.000 HzMax SPL: 118 dBHF: 1”Type HF: Neodymium driverDirectivity: 80 x 60°LF: 2x6.5”Type LF: Neodymium

AmplifierAmp Technology: digiproAmp Class: Class DPower PRG: 300 WCooling: Convection

ProcessorController: DSP 24bit/48kHzLimiter: Dual Active, Peak, RMS, Thermal

InputsSignal Input: 1x XLR 1x 6.3mm phone jack 1x RCA cinchMicrophone Input: YesSignal Output: 1x XLR 1x 6.3mm phone jack 1x RCA cinchPower Socket: VDEVoltage Range: 240 V

MechanicsHousing: Polyporpylen PPPole Mount: OptionalRigging Points: 4x M5Width: 210 mm (8.4 in)Height: 350 mm (14 in)Depth: 270 mm (10.8 in)Weight: 5.5 kg (12.13 lbs)

MINISeries

89MINIBOX Compact Active Speakers


Acoustical dataFrequency Response [- 10dB]: 85 - 19.000 HzMax SPL: 110 dBType HF: TweeterLF: 2x 6.5”

AmplifierPower PRG: 160 WCooling: Convection

ProcessorController: AnalogLimiter: Soft Clip

InputsSignal Input: 1x XLR 1x 6.3mm phone jack 1x RCA cinchMicrophone Input: YesSignal Output: 1x XLR 1x 6.3mm phone jack 1x RCA cinchPower Socket: VDE

MechanicsHousing: Polyporpylen PPRigging Points: 4x M5Width: 210 mm (8.4 in)Height: 350 mm (14 in)Depth: 270 mm (10.8 in)Weight: 5.5 kg (12.13 lbs)


Acoustical dataFrequency Response [- 10dB]: 100 - 18.000 HzMax SPL: 101 dBType HF: TweeterLF: 5”

AmplifierPower PRG: 100 WCooling: Convection

ProcessorController: AnalogLimiter: Soft Clip

InputsSignal Input: 1x XLR 1x 6.3mm phone jack 1x RCA cinchMicrophone Input: YesSignal Output: 1x XLR 1x 6.3mm phone jack 1x RCA cinchPower Socket: VDE

MechanicsHousing: Polyporpylen PPWidth: 170 mm (6.8 in)Height: 270 mm (10.8 in)Depth: 185 mm (7.4 in)Weight: 3.5 kg (7.72 lbs)

MINIBOX K300 ¢ MINIBOX K162 ¢ MINIBOX K70 ¢

A Big Heart In A Mini-box

90 ARENA Professional Passive Speakers & Subs

ARENA 8ARENA 10ARENA 12ARENA 15ARENA SW15ARENA SW18ARENA 8 PROARENA 10 PROARENA 12 PROARENA 15 PROARENA SW15 PROARENA SW18 PRO

Professional Passive Speakers & Subs

2-Way Passive Loudspeakers2-Way Passive Loudspeakers

¢ High-quality multifunctional housing made of multiplex coated with a robust black textured finish

¢ High-quality passive crossovers featuring PTC driver protection

¢ Professional-grade M8/M10 threaded rigging points

¢ Rotatable high-frequency, wide-dispersionhorns painstakingly engineered for excellent performance

¢ Subwoofer’s threaded M20 base ready to accept a pole mount

¢ High-quality components selected for ultra precise response

¢ Professional mounting accessories optionally available

The passive loudspeaker range ARENA offers high-quality 2-way enclosures and powerful subwoofers. This series can be used for many different mobile or fixed install applications due to its extensive configurations.

All high/mid units use a multipurpose housing made out of multilayer birch wood, offering a pole mount, 12 professional flypoints and a slanted backside for monitor applications.

Due to the premium loudspeaker components, all units are able to handle high sound pressure levels.

They offer outstanding, specially designed constant directivity horns which are rotatable by 90°, thanks to the symmetrical shape. The low weight of the enclosures allows easy handling.

All models are equipped with a black front grill with acoustic foam layer.

91ARENA Professional Passive Speakers & Subs


ARENA 8Technical DataSpeaker Type: 2-Way Passive Speaker

Acoustical dataNominal Power Rating: 200 W/RMSProgram Power Rating: 400 WImpedance: 8 OhmsFrequency Response [- 3dB]: 100 - 19.000 HzMax SPL: 122 dBHF: 1”Driver Protection: PTCDirectivity: 90x70°Horn: CD HornRotatable Horn: YesCrossover Frequency (passive): 2100 HzSlope MF-HF: 18 dB/OctaveLF: 8”Voice Coil LF: 1.5”

InputsSignal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-)Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

MechanicsHousing: Multiplex birch plywoodPole Mount: 36mmAngles Up: Monitor use 45°Rigging Points: 12 x M8Width: 270 mm (10.8 in)Height: 458 mm (18.32 in)Depth: 270 mm (10.8 in)Weight: 9.3 kg (20.5 lbs)


Acoustical dataNominal Power Rating: 300 W/RMSProgram Power Rating: 600 WImpedance: 8 OhmsFrequency Response [- 3dB]: 95 - 19.000 HzMax SPL: 125 dBHF: 1”Driver Protection: PTCDirectivity: 90x70°Horn: CD HornRotatable Horn: YesCrossover Frequency (passive): 2100 HzSlope MF-HF: 18 dB/OctaveLF: 10”Voice Coil LF: 2”





Acoustical dataNominal Power Rating: 400 W/RMSProgram Power Rating: 800 WImpedance: 8 OhmsFrequency Response [- 3dB]: 80 - 19.000 HzMax SPL: 127 dBHF: 1”Driver Protection: PTCDirectivity: 90x40°Horn: CD HornRotatable Horn: YesCrossover Frequency (passive): 2000 HzSlope MF-HF: 18 dB/OctaveLF: 12”Voice Coil LF: 2”




Acoustical dataNominal Power Rating: 400 W/RMSProgram Power Rating: 800 WImpedance: 8 OhmsFrequency Response [- 3dB]: 80 - 19.000 HzMax SPL: 129 dBHF: 1”Driver Protection: PTCDirectivity: 90x40°Horn: CD HornRotatable Horn: YesCrossover Frequency (passive): 2000 HzSlope MF-HF: 18 dB/OctaveLF: 15”Voice Coil LF: 2.5”


MechanicsHousing: Multiplex birch plywoodPole Mount: 36mmAngles Up: Monitor use 45°Rigging Points: 12 x M10Width: 458 mm (18.32 in)Height: 710 mm (28.4 in)Depth: 453 mm (18.12 in)Weight: 23.7 kg (52.25 lb)

ARENA 8 ¢ ARENA 10 ¢ ARENA 12 ¢ ARENA 15 ¢

Passive Loudspeakers & Subs


Passive 15” Subwoofer

The ARENA SW15 offers a 15” woofer with a 3” voice coil which can take a load up to 500W/RMS putting out an extraordinary SPL of 130dB at very powerful low end frequencies.

It can be easily combined with ARENA10 and ARENA12 high/mid units, due to the internal passive crossover. Also possible is bi-amp operation using an external crossover unit.

600 mm 460 mm

600

mm

ARENA SW15Technical DataSpeaker Type: Passive Subwoofer

Acoustical dataNominal Power Rating: 500 W/RMSProgram Power Rating: 1000 WImpedance: 8 OhmsFrequency Response [- 3dB]: 40 - 150 HzMax SPL: 130 dBLF: 15 “Voice Coil LF: 3 “Internal Crossover: YesCrossover Frequency (passive): 150 Hz


MechanicsHousing: Multiplex birch plywoodWidth: 460 mm (18.4 in)Height: 600 mm (24 in)Depth: 600 mm (24 in)Weight: 34 kg (74.96 lbs)



The 4” voice coil of the ARENA SW18 delivers powerful and accurate low frequency reproduction, down to 35Hz, at a maximum load of 600W/RMS.

Sound pressure levels of up to 132dB at a crossover frequency of 150Hz, using the internal crossover make this subwoofer the professionals choice.

This woofer can be easily combined with the ARENA satellite units, using just one external power amp.

700 mm 565 mm

700

mm

ARENA SW15 ¢ ARENA SW18 ¢


ARENA SW18Technical DataSpeaker Type: Passive Subwoofer

Acoustical dataNominal Power Rating: 600 W/RMSProgram Power Rating: 1200 WImpedance: 8 OhmsFrequency Response [- 3dB]: 35 - 150 HzMax SPL: 132 dBLF: 18“Voice Coil LF: 4“Internal Crossover: YesCrossover Frequency (passive): 150 Hz


MechanicsHousing: Multiplex birch plywoodWidth: 565 mm (22.6 in)Height: 700 mm (28 in)Depth: 700 mm (28 in)Weight: 44 kg (97 lbs)


ARENA 8 PROTechnical DataSpeaker Type: 2-Way Passive Speaker

Acoustical dataNominal Power Rating: 300 W/RMSProgram Power Rating: 600 WImpedance: 8 OhmsSensitivity 1W@1m: 94 dBFrequency Response [- 10dB]: 75 - 20.000 HzFrequency Response [- 3dB]: 100 - 19.000 HzMax SPL: 125 dBHF: 1”Voice Coil HF: 1.5”Driver Protection: PTCDirectivity: 90X70°Horn: CD Horn AluminiumRotatable Horn: YesCrossover Frequency (passive): 1800 HzSlope MF-HF: 18 dB/OctaveLF: 8”Voice Coil LF: 2”


MechanicsHousing: Multiplex birch plywoodRigging Points: 12 x M8Width: 270 mm (10.8 in)Height: 458 mm (18.32 in)Depth: 270 mm (10.8 in)Weight: 10.9 kg (24.03 lbs)


Acoustical dataNominal Power Rating: 300 W/RMSProgram Power Rating: 600 WImpedance: 8 OhmsSensitivity 1W@1m: 9 6 dBFrequency Response [- 10dB]: 70 - 20.000 HzFrequency Response [- 3dB]: 90 - 19.000 HzMax SPL: 127 dBHF: 1”Voice Coil HF: 1.5”Driver Protection: PTCDirectivity: 90X70°Horn: CD Horn AluminiumRotatable Horn: YesCrossover Frequency (passive): 1800 HzSlope MF-HF: 18 dB/OctaveLF: 10”Voice Coil LF: 2”




ARENA 8 PRO ¢ ARENA 10 PRO ¢ ARENA 12 PRO ¢ ARENA 15 PRO ¢



Acoustical dataNominal Power Rating: 500 W/RMSProgram Power Rating: 1000 WImpedance: 8 OhmsSensitivity 1W@1m: 100 dBFrequency Response [- 10dB]: 60 - 20.000 HzFrequency Response [- 3dB]: 70 - 19.000 HzMax SPL: 133 dBHF: 1.4”Voice Coil HF: 2.5”Driver Protection: PTCDirectivity: 90X40°Horn: CD Horn AluminiumRotatable Horn: YesCrossover Frequency (passive): 1400 HzSlope MF-HF: 18 dB/OctaveLF: 12”Voice Coil LF: 3”




Acoustical dataNominal Power Rating: 500 W/RMSProgram Power Rating: 1000 WImpedance: 8 OhmsSensitivity 1W@1m: 100 dBFrequency Response [- 10dB]: 60 - 20.000 HzFrequency Response [- 3dB]: 70 - 19.000 HzMax SPL: 133 dBHF: 1.4”Voice Coil HF: 2.5”Driver Protection: PTCDirectivity: 90X40°Horn: CD Horn AluminiumRotatable Horn: YesCrossover Frequency (passive): 1400 HzSlope MF-HF: 18 dB/OctaveLF: 15”Voice Coil LF: 3”





The ARENA SW15 PRO is a compact, high-performance subwoofer housed in a bass reflex enclosure. Its impulse response is amazingly true, rendering low-end frequencies with hair-trigger precision in a tight, finely contoured sonic image.

Deployed to stand alone or in a double stack, it is an excellent choice for FOH applications. What‘s more, its powerful punch makes it your subwoofer of choice for drum fills.

600 mm 460 mm

600

mm

ARENASW15 PRO

Technical DataSpeaker Type: Passive Subwoofer

Acoustical dataNominal Power Rating: 500 W/RMSProgram Power Rating: 1000 WImpedance: 8 OhmsFrequency Response [- 10dB]: 35 - X-Over HzFrequency Response [- 3dB]: 40 - X-Over HzMax SPL: 132 dBLF: 15“Voice Coil LF: 3“Internal Crossover: No


MechanicsHousing: Multiplex birch plywoodPole Mount: M20Width: 460 mm (18.4 in)Height: 600 mm (24 in)Depth: 600 mm (24 in)Weight: 34.8 kg (76.72 lbs)



The ARENA SW18 PRO is a powerful high-capacity 18” subwoofer housed in a bass reflex enclosure with a low limiting frequency of 35 Hz.

Developed specifically to provide a big low-end boost for high-performance fullrange speakers, this bass bin’s hallmarks include remarkably dynamic performance and a powerful punch even at very low frequencies.

700 mm 565 mm

700

mm

ARENA SW15 PRO ¢ ARENA SW18 PRO ¢


ARENASW18 PRO

Technical DataSpeaker Type: Passive Subwoofer

Acoustical dataNominal Power Rating: 1000 W/RMSProgram Power Rating: 2000 WImpedance: 8 OhmsFrequency Response [- 10dB]: 28 - X-Over HzFrequency Response [- 3dB]: 35 - X-Over HzMax SPL: 134 dBLF: 18”Voice Coil LF: 4”Internal Crossover: No


MechanicsHousing: Multiplex birch plywoodPole Mount: M20Width: 565 mm (22.6 in)Height: 700 mm (28 in)Depth: 700 mm (28 in)Weight: 43.2 kg (95.24 lbs)

100

PASSIVE SPEAKER

OPERA P15Technical DataSpeaker Type: 2-Way Passive Speaker

Acoustical dataNominal Power Rating: 400 W/RMSProgram Power Rating: 800 WImpedance: 8 OhmsFrequency Response [- 10dB]: 68 - 19.500 HzMax SPL: 128 dBHF: 1”Voice Coil HF: 1.75”Driver Protection: PTCDirectivity: 80°/65°x 60°Horn: Asymmetrical CD HornCrossover Frequency (passive): 2100 HzLF: 15”Voice Coil LF: 3”

InputsSignal Input: 2x Speakon

MechanicsHousing: Polyporpylen PPAngles Up: Monitor use 43°Pole Mount: 36mmOptional Accessories: Mounting bracketWidth: 432 mm (17.28 in)Height: 655 mm (26.2 in)Depth: 353 mm (14.12 in)Weight: 18.4 kg (40,57 lbs)

OPERA P15 2-Way Passive Speaker

101

AC26NDigital Audio Controller for Loudspeaker Processing

The new audio digital processor AC26N allows you to control any professional audio system, both active and passive.

Equipped with two inputs and six outputs balanced analogically, two in/out digital AES/EBU and an RDNet control, this processor allows a perfect control in a simple and complete way. Each output possesses a parametric equalizer, delay, phase and level control, completely run by a powerful 28/56 Bit DSP, unique in its kind. This processors control may be directed by the front control panel or through an RDNet connected computer.

General Features:

2x XLR Balanced analog inputs6x XLR Balanced analog outputs2 channels AES/EBU digital input with SRC (XLR connector)2 channels AES/EBU digital ouputs (XLR connector)Full range power supplyRDNet Hardware Interface USB InterfaceRemotable via RDNet or USB using dBtechnologies softwareClean and Easy to use user interface on front panel

AC-26N ControllerAC-26N Controller

Audio Specifications:

Max input level: 21dBu (without pad) / 27dBu (with -6dB pad)Max output level: 21dBuDSP processing: 28/56bit - 48KHzA/D and D/A Converters: 24bit - 96KhzAnalog Input S/N ratio: 115dB A/D Section S/N ratio: 118dBD/A Section S/N ratio: 120dB

AC26N Controller

102

HPA 1000

Technical DataPower Output RMS 4Ohm: 2x 510W Power Output RMS 8Ohm: 2x 330W Weight: 15Kg

• Class (HD) technology • Fast Rensponse • Easy to Configure• Extensive Protective Circuits• Operable at 2 Ohms

HPA 1400



HPA 2800



HPA 3100


• Class (HD) technology • Fast Rensponse • SMPS• Extensive Protective Circuits• Operable at 2 Ohms

HPA Amplifiers

HPA Amplifiers

DVX

miniboX

arena

reaDy 4

SiGma

cromo+

Sub

FLeXSyS

opera bLack Line

opera DX

inStaLLation

inStaLLation

inStaLLation

acceSSorieS

inStaLLation

inStaLLation

inStaLLation

inStaLLation

inStaLLation

inStaLLation

coVerS

coVerS

coVerS

coVerS

cabLeS

coVerS

coVerS

coVerS

coVerS

coVerS

DVX D8 Hp

miniboX L160D

arena 8arena 8 pro

arena 10arena 10 pro



arena Sw15arena Sw15 pro

arena Sw18arena Sw18 pro

Mobile speaker

DVX D10 Hp

miniboX k70

miniboX k162

miniboX k162

DVX D12 Hp

DVX D15 Hp

DVX Dm12

SiGma S115

cromo 8+

Sub 15H

FLeXSyS F8

710 bL, 910 bL

508 DX

DVX Dm15

SiGma S118

cromo 10+

Sub 18H

Sub 05D

FLeXSyS F10

712 bL, 715 bL, 912 bL, 915 bL

510 DX, 710 DX, 910 DX

510 DX, 710 DX, 910 DX

DVX Dm28

SiGma S215

cromo 12+

Sub 28D

Sub 808D

Sub 12D

Sub 15D

Sub 18D

FLeXSyS F12

FLeXSyS F212

FLeXSyS F12

FLeXSyS F315

TE M8DTF 8

DTF 8AWB 09

WB11WB 03WWB 03sn130

TE M8WB A810

WB 09WB A8

TE M8WB A810

WB 09WB A10

TE M10WB 09

WB A12

TE M10WB 09

WB A15

Ds2

Ds2

r4 hTr4 pTr4 hMr4 cM

TE M8DTF 10

DTF 10AWB 09

WB11WB 03WWB 03

WB11WB 03WWB 03sn130Ak 50

WB11WB 03WWB 03sn130Ak 50

TE M10DTF 12WB 09

TE M10DTF 15WB 09

TE M10

Ds2

WB 09

Ds2-sDs2

TE M8WB 09

WB 09WB D10

WB 09

TE M10

Ds2

WB 09

Ds2-sDs2

AFl 01

TE M8WB 09

WB 09WB D25

WB 09WB D10

WB 09WB D25

WB 09

AFl 01

AFl 01

AFl 01

Ds2-sDs2

Ds2-sDs2

TE M10WB 09

TE M10

TE M10WB 09

TE M10

Tc 8

Tc sW15

Tc sW18

Tc r4

Tc 10

TT 06

TT 06

Tc 12

Tc 15

Tc 12M

AFl 05

Tc cr08

Tc s15hrc Ms12-suBh

Tc F8

TT Op10

TT Op08

Tc 15M

AFl 05

Tc cr10

Tc s18hrc Ms12-suBh

Tc s05D

Tc F8

TT Op25

TT Op10

TT Op25

Tc 28M

AFl 05

Tc cr12

Tc s28D

Tc s808D

Tc s12D

Tc s15D

Tc s18D

Tc F8

Tc F8

Tc F8

Tc F8

ACCESSORIES

Accessories installation, clables,Accessories installation, cables, covers...

www.dbtechnologies.com

RCF USA Inc.

USA sales

110 Talmadge Rd.

08817 Edison, NJ USA

Tel. +1 732-9026100

Fax. +1 732-9026105

[email protected]

dBTechnologies

Italy & International sales

A.E.B. Industriale Srl

Via Brodolini, 8 - Loc. Crespellano

40053 Valsamoggia (BO) ITALY

Tel +39 051.969.870

Fax +39 051.969.725

[email protected]

dBTechnologies Deutschland GmbH

Germany, Belgium, Netherlands, Luxembourg

Hansestrasse 93

51149 Köln

Tel. +49 (0)2203 925370

Fax. +49 (0)2203 9253773

[email protected]

Documents

Catalogue 2014 - audioeffetti.com 2014 dB.pdf · HPA 1000 Amplifier 102 HPA 1400 Amplifier 102 HPA 2800 Amplifier 102 ... 200+200W RMS DIGIPRO® G3 CLASS-D AMPLIFIER (800W …