Upload
vuonghuong
View
246
Download
17
Embed Size (px)
Citation preview
Catalog–Power Tools2012
Electric PoweredSystems
Battery PoweredSystems
PneumaticPoweredSystems
Catalo
g–
Pow
er Too
ls 2012
Numerical Index N-1 to N-7
Alphabetical Index A-1 to A-2
Anspach Products 1-1 to 1-29
Synthes Power Equipment 2-1 to 2-55
CONTENTS
Anspach, eMax, XMax and Synthes are trademarks of Synthes, Inc. or its affiliates.
© 2011 Synthes, Inc. or its affiliates. All rights reserved. Printed in U.S.A. 11/11 20-0070 rev A. J10412-A
No extracts or copies of this catalog may be made without the written permission of Synthes, Inc. All Synthes catalogs and price lists remain the property of Synthes and may only be used in connection with the instruments and implants distributed by Synthes.
Illustrations not actual size
11/11
1-1
Anspach Products
Handpiece Key
XMax
MicroMax Plus
BlackMax
iMRI
eMax 2, eMax 2 Plus
e12
XM
MM
BM
iMRI
EM
E12
Pneumatic High Performance Instrument Systems
XMax Pneumatic System............................................ 1-2
Black Max Pneumatic System ..................................... 1-2
Pneumatic Instrument System Accessories.................. 1-3
Powered Irrigation System.......................................... 1-4
iMRI System ............................................................... 1-5
Electric High Performance Instrument System
eMax2 Plus System .................................................... 1-6
Small Bone High Performance Instrument System
e12 Electric Instrument System................................... 1-7
Anspach Standard Attachments and Dissection Tools
Straight Attachments ................................................ 1-8
Contra and Right Angle Attachments, Craniotomes, and Specialty Attachments ................... 1-11
Heavy Duty Attachments............................................ 1-12
Black Max Standard Attachments and Dissection Tools
Straight Attachments ................................................. 1-14
Minimally Invasive Attachments ................................. 1-17
Craniotomes, Specialty, MRA,and Contra and Right Attachments............................ 1-18
Micro Curved Attachment (MCA) and Dissection Tools
MCA.......................................................................... 1-19
MA Attachments and Dissection Tools
Minimal Access Attachments ..................................... 1-20
Angle Attachments and Dissection Tools
Quick Disconnect (QD) Angle Attachments ................ 1-21
Saw Attachments and Saw Blades
microSaws ................................................................. 1-23
Small Attachments: J-latch and Jacobs Chuck ............ 1-24
Sagittal Saws ............................................................. 1-25
Saw Blades ................................................................ 1-26
Additional Surgical Instruments and Accessories
Bone Collector ........................................................... 1-27
Compact SpeedReducer............................................. 1-27
Cranial Perforator ...................................................... 1-27
Couplers .................................................................... 1-28
KAM SuperSucker Disposable Suction Tips/Filters ....... 1-28
Cutting Burr Styles.................................................. 1-29
Anspach products are manufactured under one or more of the following U.S. Patent Nos. RE 37,358; 5,405,348; 5,601,560; 5,630,818;5,741,084; 5,904,687; 6,607,533; 6,733,218; 6,746,153; 6,749,341; 6,969,368; 7,128,544; 7,144,415; 7,217,090; 7,255,546;7,261,526 and 7,458,979. Additional U.S. and International patents pending.Aesculap is a registered trademark of Aesculap ACI. Midas Rex and Legend are registered trademarks of Medtronics, Inc.The Synthes Anspach Black Max Instrument System is not sponsored by, endorsed by or otherwise associated with United StatesManufacturing Corp. or its Blackmax prosthetic limbs.
AnspachProducts
Illustrations not actual size
11/11
1-2
Pneumatic High Performance Instrument Systems
XMax Pneumatic System
XMAX XMax Handpiece
BLACKMAX-N Black Max Swivel/Angle HandpieceBLACKMAX-N-LP Low Pressure Black Max Handpiece, Swivel Angle
XM
Black Max Pneumatic System BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-3
Pneumatic High Performance Instrument Systems
Pneumatic Instrument System Accessories
MOTOR-CASE* Handpiece Sterilization CaseXM-CASE XMax Sterilization Case & TrayMM-CASE-TRAY microMax Plus Sterilization Case & TrayB-CASE-TRAY Black Max Sterilization Tray with CaseMM-CTR-RACK Cutting Burr RackAUTOLUBE-III Foot ControlAUTOLUBE-III-DISS Foot Control, DISS AdapterAUTOLUBE-III-20 Foot Control with 20’ HoseAL-III-DISS-20 Foot Control with 20’ Hose, DISS AdapterAL-III-30 Foot Control with 30’ HoseAL-III-DISS-30 Foot Control with 30’ Hose, DISS AdapterAUTOLUBE-III-MA7 Foot Control, MA7 AdapterAUTOLUBE-III-IRR Foot Control for Irrigation SystemAUTOLUBE-III-FG Foot Control with Foot GuardAUTOLUBE-III-FG7 Foot Control with Foot Guard, MA7 AdapterAUTOLUBE-III-NK Foot Control with Nitrogen Keyed AdapterAL-III-IRR-MA7 Foot Control for Irrigation System, MA7 AdapterACB Attachment Cleaning BrushesOIL-II Instrument Oil w/1 Replacement Filter for AutoLube-II & -IIIB-OIL Instrument Oil w/1 Replacement Filter for AutoLube-IFILTER-II AutoLube-II and -III Filters (5/Pkg)PG Pistol Grip for Black MaxSCHRADER-F Schrader Adapter
Multiple Outlet Manifold and HosesMOM Multiple Outlet ManifoldHOSE-01 10 Inch Air Extension HoseHOSE-5 5 Foot Air Extension HoseHOSE-10 10 Foot Air Extension HoseHOSE 20 Foot Air Extension HoseHOSEDISS 10 Inch Air Extension Hose with DISS AdapterHOSE5-DISS 5 Foot Air Extension Hose with DISS AdapterHOSE-10-DISS 10 Foot Air Extension Hose with DISS AdapterHOSE-15-DISS 15 Foot Air Extension Hose with DISS AdapterHOSE-20-DISS 20 Foot Air Extension Hose with DISS Adapter
Extension Hose may be added to any MOM unit intended for use with OR wall outlets.
* Small sterilization case, holds handpiece only
MM XM BM AnspachProducts
Illustrations not actual size
11/11
1-4
Pneumatic High Performance Instrument Systems
Powered Irrigation System
Powered Irrigation SystemIRR-PUMP-II Powered Irrigation Pump*IRRIGATE-TUBE Sterile Tubing and Hoseclips for Irrigation System (1ea.)IRRIGATE-TUBE-HF Sterile High Flow Tubing and Hoseclips for Irrigation System (1ea.)
Irrigation Clips IRR-CLIP-10 Irrigation Clip for SHORT AttachmentIRR-CLIP-20 Irrigation Clip for QD8 and QD8-S Angle AttachmentsIRR-CLIP-30 Irrigation Clip for SHORT-HD AttachmentIRR-CLIP-40 Irrigation Clip for MEDIUM-HD and LONG-HD AttachmentIRR-CLIP-50 Irrigation Clip for MEDIUM, LONG, LONG-S, and LONG-01 AttachmentsIRR-CLIP-60 Irrigation Clip for QD11, QD11-S, QD14, and QD14-S Angle Attachments
Irrigation Clips IRR-CLIP-20 Irrigation Clip for B-QD8 and B-QD8-S AttachmentIRR-CLIP-30 Irrigation Clip for B-SILVER AttachmentIRR-CLIP-40 Irrigation Clip for B-BLUE-S and B-VIOLET AttachmentsIRR-CLIP-50 Irrigation Clip for B-TURQ-L AttachmentIRR-CLIP-60 Irrigation Clip for B-QD11, B-QD11-S, B-QD14, and B-QD14-S Attachments
XM MM
BM
EM
All irrigation clips are supplied sterile and are designed for single use only.
*In order to operate the Anspach Irrigation Pump, utilize an AUTOLUBE-III-IRR or AL-III-IRR-MA7.Upgrades to the IRR version are available.
MM XM BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-5
Pneumatic High Performance Instrument Systems
iMRI System
IMRI-MOTOR iMRI Handpiece
IMRI System AccessoriesIMRI-FOOT-CTRL iMRI Air ControlIMRI-OIL iMRI Synthetic Oil
IMRI Attachments
IMRI-SHORT iMRI Short AttachmentIMRI-S-4B 4 mm Fluted BallIMRI-S-1R 1.4 mm x 12.8 mm Fluted RouterIMRI-S-8NS-M 3 mm Fluted Matchstick, extends 8.9 mm, Less AggressiveIMRI-S-1004TD 1.0 mm x 4.0 mm Twist Drill with Depth Stop
IMRI-SHORT-HD iMRI Short Heavy Duty Attachment IMRI-SHD-6B 6 mm Fluted Ball
IMRI-CRANI-A iMRI Adult CraniotomeIMRI-A-CRN 1.85 mm x 16 mm Fluted Router
iMRI AnspachProducts
Illustrations not actual size
11/11
1-6
Electric High Performance Instrument System
eMax2 Plus System
EMAX2PLUS eMax 2 Plus HandpieceSC2102 Single Port Console, no IrrigationE-FP Electric Foot PedalE-FP-DIR/IRR Electric Foot Pedal, with Direction & Irrigation
Switch
eMax 2 Plus Instrument System AccessoriesMOTOR-CASE Anspach Handpiece CaseEMAX2-HC Hand ControlEMAX2-TRAY Sterilization Case & TrayMM-CTR-RACK Cutting Burr RackACB Attachment Cleaning Brushes
See Page 1-4 for irrigation accessories.
EM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-7
Small Bone High Performance Instrument System
e12 Electric Instrument System
E12 e12 Electric HandpieceSC2101 Single Port Console with IrrigationE-FP Electric Foot Pedal
e12 Instrument System AccessoriesE12-HC e12 Hand Control
e12 with the SA-JACOBS attachment
E12 AnspachProducts
Illustrations not actual size
11/11
1-8
Anspach Standard Attachments and Dissection Tools
Straight Attachments
Dissection Tools for 5 cm Short Attachment (SHORT)S-1B 1 mm Fluted Ball, ExtendedS-1SB 1 mm Fluted Ball, StandardS-15B 1.5 mm Fluted Ball, ExtendedS-15SB 1.5 mm Fluted Ball, StandardS-2B 2 mm Fluted Ball, ExtendedS-2SB 2 mm Fluted Ball, StandardS-2SBT 2 mm Fluted Ball, Tapered, StandardS-25B 2.5 mm Fluted Ball, ExtendedS-25SB 2.5 mm Fluted Ball, StandardS-3B 3 mm Fluted Ball, ExtendedS-3SB 3 mm Fluted Ball, StandardS-3SBT 3 mm Fluted Ball, Tapered, StandardS-35B 3.5 mm Fluted Ball, ExtendedS-35SB 3.5 mm Fluted Ball, StandardS-4B 4 mm Fluted BallS-4BT 4 mm Fluted Ball, TaperedS-5B 5 mm Fluted BallS-5B-12F 5 mm Fluted Ball, 12 FlutesS-6B 6 mm Fluted BallS-7B 7 mm Fluted BallS-8B 8 mm Fluted BallS-9B 9 mm Fluted BallS-05D 0.5 mm Diamond Ball, ExtendedS-06SD 0.6 mm Diamond Ball, StandardS-08SD 0.8 mm Diamond Ball, StandardS-1D 1 mm Diamond Ball, ExtendedS-1SD 1 mm Diamond Ball, StandardS-12D 1.2 mm Diamond Ball, ExtendedS-15D 1.5 mm Diamond Ball, ExtendedS-15SD 1.5 mm Diamond Ball, StandardS-2D 2 mm Diamond Ball, ExtendedS-2SD 2 mm Diamond Ball, StandardS-2SD-120 2 mm Diamond Ball, 120/140 Grit, StandardS-25D 2.5 mm Diamond Ball, ExtendedS-25SD 2.5 mm Diamond Ball, StandardS-3D 3 mm Diamond Ball, ExtendedS-3SD 3 mm Diamond Ball, StandardS-3SD-100 3 mm Diamond Ball, 100/120 Grit, StandardS-35D 3.5 mm Diamond Ball, ExtendedS-35SD 3.5mm Diamond Ball, StandardS-4D 4 mm Diamond BallS-4D-100 4 mm Diamond Ball, 100/120 GritS-4D-L 4 mm Diamond Ball, Extends 27 mmS-5D 5 mm Diamond BallS-5D-100 5 mm Diamond Ball, 100/120 GritS-6D 6 mm Diamond BallS-1DC 1 mm Coarse Diamond Ball, ExtendedS-1SDC 1 mm Coarse Diamond Ball, StandardS-15DC 1.5 mm Coarse Diamond Ball, ExtendedS-15SDC 1.5 mm Coarse Diamond Ball, StandardS-15DCT 1.5 mm Coarse Diamond Ball, Tapered, Extended
S-2DC 2 mm Coarse Diamond Ball, ExtendedS-2SDC 2 mm Coarse Diamond Ball, StandardS-2SDCT 2 mm Coarse Diamond Ball, Tapered, StandardS-25DC 2.5 mm Coarse Diamond Ball, ExtendedS-25SDC 2.5 mm Coarse Diamond Ball, StandardS-3DC 3 mm Coarse Diamond Ball, ExtendedS-3SDC 3 mm Coarse Diamond Ball, StandardS-3SDCT 3 mm Coarse Diamond Ball, Tapered,
StandardS-3SDC-50 3 mm Coarse Diamond Ball, 50/60 Grit,
StandardS-35DC 3.5 mm Coarse Diamond Ball, ExtendedS-4DC 4 mm Coarse Diamond BallS-5DC 5 mm Coarse Diamond BallS-5DC-40 5 mm Coarse Diamond Ball, 40/60 GritS-6DC 6 mm Coarse Diamond BallS-8DC 8 mm Coarse Diamond BallS-4DX 4 mm Extra Coarse Diamond BallS-5DX 5 mm Extra Coarse Diamond BallS-6DX 6 mm Extra Coarse Diamond BallS-1R 1.4 mm x 12.8 mm Fluted RouterS-6R 1.12 mm x 6.35 mm Fluted RouterS-4OV 4 mm x 8 mm Fluted OvalS-8N-18 1.8 mm Fluted MatchstickS-8N 2.3 mm Fluted MatchstickS-8N-L 2.3 mm Fluted Matchstick, Extends 22 mmS-8NS 3 mm Fluted MatchstickS-8NS-M 3 mm Fluted Matchstick, Extends 8.9 mm,
Less AggressiveS-8ND 2.5 mm Diamond MatchstickS-8NSD 3.2 mm Diamond MatchstickS-5AC 5 mm Fluted AcornS-6AC 6 mm Fluted AcornS-9AC 9.2 mm Fluted AcornS-1203TD 1.2 mm x 3 mm Twist DrillS-1254TD Twist Drill for 1.25 mm x 4 mm ScrewS-1504TD Twist Drill for 1.5 mm x 4 mm ScrewS-1506TD Twist Drill for 1.5 mm x 6 mm ScrewS-1506TD-M 1.5 mm x 6 mm Fluted Twist DrillS-1510TD 1.55 mm x 10 mm Fluted Twist DrillS-2004TD Twist Drill for 2.0 mm x 4 mm ScrewS-2006TD Twist Drill for 2.0 mm x 6 mm ScrewS-2433TD 2.4 mm x 3.3 mm Twist DrillS-6P 6 mm x 9 mm Fluted PearS-6IP 6 mm x 11.8 mm Fluted Pear, InvertedS-7IP 7 mm x 13.1 mm Fluted Pear, InvertedS-6PD 6 mm x 9 mm Diamond PearS-68DRMDC 6.8 mm x 10.6 mm Coarse Diamond DrumS-68DRMDX 6.8 mm x 10.6 mm Extra Coarse Diamond
Drum
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment. Extended length cuttingburrs extend approximately 27 mm from the distal end of the attachment.
XM MM EM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-9
Anspach Standard Attachments and Dissection Tools
Straight Attachments — continued
SHORT 5 cm Long Attachment
S-1SB-C 1 mm Carbide Fluted Ball, StandardS-2SB-C 2 mm Carbide Fluted Ball, StandardS-3SB-C 3 mm Carbide Fluted Ball, StandardS-4B-C 4 mm Carbide Fluted Ball, StandardS-5B-C 5 mm Carbide Fluted Ball, StandardS-6B-C 6 mm Carbide Fluted Ball, Standard
S-7B-C 7 mm Carbide Fluted Ball, StandardS-1B-C 1 mm Carbide Fluted Ball, ExtendedS-2B-C 2 mm Carbide Fluted Ball, ExtendedS-3B-C 3 mm Carbide Fluted Ball, ExtendedS-4BL-C 4 mm Carbide Fluted Ball, ExtendedS-15DRMC 1.5 mm x 7.5 mm Cylindrical Carbide DrumS-15DRMC-L 1.5 mm x 7.5 mm Cylindrical Carbide Drum,
extends 25 mm
MEDIUM 8 cm Long Attachment
M-1B 1 mm Fluted Ball, ExtendedM-1SB 1 mm Fluted Ball, StandardM-2B 2 mm Fluted Ball, ExtendedM-2SB 2 mm Fluted Ball, StandardM-3B 3 mm Fluted Ball, ExtendedM-3SB 3 mm Fluted Ball, StandardM-3SB-2 3 mm Fluted Ball, 2 mm Shaft ExposureM-4B 4 mm Fluted BallM-5B 5 mm Fluted BallM-5B-2 5 mm Fluted Ball, 2 mm Shaft ExposureM-5B-C 5 mm Carbide Fluted BallM-6B 6 mm Fluted BallM-6B-C 6 mm Carbide Fluted BallM-7B 7 mm Fluted BallM-05D 0.5 mm Diamond Ball, ExtendedM-05SD 0.5 mm Diamond Ball, StandardM-1D 1 mm Diamond Ball, ExtendedM-1SD 1 mm Diamond Ball, StandardM-15D 1.5 mm Diamond Ball, ExtendedM-15SD 1.5 mm Diamond Ball, StandardM-2D 2 mm Diamond Ball, ExtendedM-2SD 2 mm Diamond Ball, StandardM-25SD 2.5 mm Diamond Ball, StandardM-3D 3 mm Diamond Ball, ExtendedM-3SD 3 mm Diamond Ball, StandardM-35SD 3.5 mm Diamond Ball, StandardM-4D 4 mm Diamond BallM-5D 5 mm Diamond BallM-6D 6 mm Diamond BallM-1DC 1 mm Coarse Diamond Ball , ExtendedM-1SDC 1 mm Coarse Diamond Ball, StandardM-15SDC 1.5 mm Coarse Diamond Ball, Standard
M-2DC 2 mm Coarse Diamond Ball, ExtendedM-2SDC 2 mm Coarse Diamond Ball, StandardM-3DC 3 mm Coarse Diamond Ball, ExtendedM-3DC-2 3 mm Coarse Diamond Ball,
2 mm Shaft ExposureM-3SDC 3 mm Coarse Diamond Ball, StandardM-35SDC 3.5 mm Coarse Diamond Ball, Standard M-4DC 4 mm Coarse Diamond BallM-5DC 5 mm Coarse Diamond BallM-6DC 6 mm Coarse Diamond BallM-6DC-2 6 mm Coarse Diamond Ball,
2 mm Shaft ExposureM-4DX 4 mm Extra Coarse Diamond BallM-6DX 6 mm Extra Coarse Diamond BallM-6DX-20 6 mm Extra Coarse Diamond Ball, 20/30 GritM-1R 1.2 mm x 12.8 mm Fluted RouterM-4OV 4 mm x 8 mm Fluted OvalM-56OV 5 mm x 6 mm Fluted OvalM-58OV 5 mm x 8 mm Fluted OvalM-5OV 5 mm x 10 mm Fluted OvalM-55OV-C 5.5 mm x 10 mm Carbide Fluted OvalM-4FD 4 mm x 10 mm Diamond FlameM-8N 2.3 mm Fluted MatchstickM-8NS 3 mm Fluted MatchstickM-8NS-M 3 mm Fluted Matchstick, Less AggressiveM-8NS-M-C 3 mm Carbide Fluted Matchstick,
Less AggressiveM-8ND 2.5 mm Diamond MatchstickM-8NSD 3.2 mm Diamond MatchstickM-5AC 5 mm Fluted AcornM-7AC 7 mm Fluted AcornM-6P 6 mm x 9 mm Fluted PearM-5BA-20 5 mm x 20 mm Fluted Barrel
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment.Extended length cutting burrs extend approximately 27 mm from the distal end of the attachment.
XM MM EM AnspachProducts
Illustrations not actual size
11/11
1-10
Anspach Standard Attachments and Dissection Tools
Straight Attachments — continued
LONG-S 10.5 cm Long AttachmentLONG 11 cm Long Attachment
L-1SB 1 mm Fluted Ball, StandardL-2SB 2 mm Fluted Ball, StandardL-3SB 3 mm Fluted Ball, StandardL-4B 4 mm Fluted BallL-4B-C 4 mm Carbide Fluted BallL-5B 5 mm Fluted BallL-5B-C 5 mm Carbide Fluted BallL-6B 6 mm Fluted BallL-7B 7 mm Fluted BallL-9B 9 mm Fluted BallL-1SD 1 mm Diamond Ball, StandardL-2SD 2 mm Diamond Ball, StandardL-3SD 3 mm Diamond Ball, StandardL-4D 4 mm Diamond BallL-5D 5 mm Diamond BallL-6D 6 mm Diamond BallL-3SDC 3 mm Coarse Diamond Ball, StandardL-4DC 4 mm Coarse Diamond BallL-5DC 5 mm Coarse Diamond BallL-6DC 6 mm Coarse Diamond BallL-4DX 4 mm Extra Coarse Diamond BallL-5DX 5 mm Extra Coarse Diamond BallL-6DX 6 mm Extra Coarse Diamond BallL-8DX 8 mm Extra Coarse Diamond BallL-1R 1.2 mm x 12.8 mm Fluted RouterL-4OV 4 mm x 8 mm Fluted OvalL-56OV 5 mm x 6 mm Fluted Oval
L-58OV 5 mm x 8 mm Fluted OvalL-5OV 5 mm x 10 mm Fluted OvalL-8N 2.3 mm Fluted MatchstickL-8NS 3 mm Fluted MatchstickL-8NS-M 3 mm Fluted Matchstick,
Less AggressiveL-8NS-M-C 3 mm Carbide Fluted Matchstick,
Less AggressiveL-8ND 2.5 mm Diamond MatchstickL-8NSD 3.2 mm Diamond MatchstickL-8NSDC 3.2 mm Coarse Diamond MatchstickL-5AC 5 mm Fluted AcornL-7AC 7 mm Fluted AcornL-4BA-S 4 mm x 8 mm Fluted BarrelL-5BA 5 mm x 10 mm Fluted BarrelL-35DR 3.5 mm x 8.4 mm Fluted Drum L-4DRM 4 mm x 8.9 mm Fluted Drum, Side Cut OnlyL-5DRM 5 mm x 8.4 mm Fluted DrumL-5DRC 5 mm x 14 mm Fluted Drum, Side Cut OnlyL-6DRC 6 mm x 14 mm Fluted Drum, Side Cut OnlyL-68DRMDX 6.8 mm x 10.6 mm Extra Coarse Diamond
DrumL-7DRC 7 mm x 14 mm Fluted Drum, Side Cut OnlyL-7DRC-11 7 mm x 11 mm Fluted DrumL-8DRC 8 mm x 14 mm Fluted Drum, Side Cut OnlyL-8DRC-11 8 mm x 11 mm Fluted DrumL-9DRC 9 mm x 14 mm Fluted Drum, Side Cut OnlyL-10DRC 10 mm x 14 mm Fluted Drum, Side Cut Only
MIA16 16 cm Minimally Invasive Attachment
MIA16-3SB 3 mm Fluted Ball, StandardMIA16-4B 4 mm Fluted Ball MIA16-6B 6 mm Fluted BallMIA16-4D 4 mm Diamond BallMIA16-5D 5 mm Diamond Ball
MIA16-4DC 4 mm Coarse Diamond BallMIA16-6DC 6 mm Coarse Diamond BallMIA16-6DX 6 mm Extra Coarse Diamond BallMIA16-5OV 5 mm x 10 mm Fluted OvalMIA16-8NS 3 mm Fluted Matchstick
XM MM EM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-11
Anspach Standard Attachments and Dissection ToolsContra and Right Angle Attachments, Craniotomes andSpecialty Attachments
Contra and Right Angle Attachments
ORANGE-45 45˚ Contra Angle Attachment Multiple AngleORANGE-90 90˚ Right Angle Attachment
ORNG-35 2.3 mm Fluted BallORNG-36 2.9 mm Fluted BallORNG-1 11.1 mm Fluted RouterORNG-8-18 1.8 mm Fluted MatchstickORNG-33 10.5 mm Small Bone BurrORNG-1275 1.2 mm x 7.5 mm Twist DrillORNG-37 1.8 mm Fluted Drum
Craniotomes
CRANI-P Pediatric CraniotomeP-CRN-M 1.3 mm x 12.8 mm Fluted RouterP-CRN 1.4 mm x 12.8 mm Fluted Router
CRANI-L Large Craniotome Also available as a rotating attachment (CRANI-L-R) L-CRN 2.5 mm x 25.4 mm Fluted RouterL-CRN-S 2.47 mm x 30.3 mm Spiral Router
CRANI-A Adult CraniotomeA-CRN 1.85 mm x 16 mm Fluted RouterA-CRN-M 2 mm x 15.6 mm Fluted RouterA-CRN-S 2.15 mm x 22 mm Spiral Router
CRANI-A-R Rotating Adult CraniotomeA-CRN 1.85 mm x 16 mm Fluted RouterA-CRN-M 2 mm x 15.6 mm Fluted RouterA-CRN-S 2.15 mm x 22 mm Spiral Router
Specialty Attachments
ADG 7.2 cm Adjustable Drill Guide The ADG adjusts 3-6 mm incrementsADG-10 1.0 mm Twist Drill for 1.25 mm ScrewADG-11 1.1 mm Twist Drill for 1.50 mm ScrewADG-13 1.3 mm Twist Drill for 1.70 mm ScrewADG-155 1.5 mm Twist Drill for 2.0 mm Screw
CDA 6.8 cm Controlled Depth AttachmentThe CDA adjusts 1-4 mm increments
CDA-1R 1.2 mm x 12.8 mm Fluted Router
XM MM EM
AnspachProducts
Illustrations not actual size
11/11
1-12
Anspach Standard Attachments and Dissection Tools
Heavy Duty Attachments
SHORT HD 5 cm Heavy Duty Short Attachment The Short-HD attachment is comparable in length
to the Black Max B-SILVER.
SHD-5B 5 mm Fluted BallSHD-6B 6 mm Fluted BallSHD-7B 7 mm Fluted BallSHD-6DX 6 mm Extra Coarse Diamond BallSHD-6R 1.12 mm x 6.35 mm Fluted RouterSHD-25R 2.15 mm x 25.4 mm Fluted RouterSHD-3-10 1.93 mm Suture Pass Drill/1.17 EyeSHD-8NS 3 mm Fluted MatchstickSHD-6AC 6 mm Fluted AcornSHD-75AC 7.5 mm Fluted AcornSHD-75AC-A 7.5 mm Fluted Acorn, Less AggressiveSHD-9AC 9.2 mm Fluted AcornSHD-17DD 17 mm Diamond DiscSHD-25DD 25.4 mm Diamond DiscSHD-1504TD 1.15 mm Twist Drill for 1.5 mm x 4 mm ScrewSHD-DS-A 1.7 mm x 11.9 mm Twist Drill with Depth Stop, Aesculap®
SHD-325DS 3.2 mm x 5 mm Twist Drill with Depth StopSHD-4892DS 4.8 mm x 9.2 mm Twist Drill with Depth Stop
MEDIUM-HD 8 cm Heavy Duty Medium Attachment The Medium-HD attachment is comparable in length
to the Black Max B-VIOLET.
MHD-6B 6 mm Fluted BallMHD-25R 2.15 mm x 25.4 mm Fluted RouterMHD-8NS 3 mm Fluted MatchstickMHD-8NS-M 3 mm Fluted Matchstick, Less AggressiveMHD-6AC 6 mm Fluted AcornMHD-62DRM 6.2 mm x 4.6 mm Fluted Drum, Side Cut OnlyMHD-3DRMC 3 mm x 9.5 mm Fluted Carbide DrumMHD-15C 3.2 mm Fluted Carbide Side CutterMHD-95DRM 9.5 mm Fluted DrumMHD-17DD 17 mm Diamond DiscMHD-25DD 25.4 mm Diamond DiscMHD-16CT 6.7 mm Coring ToolMHD-19CT 9.9 mm Coring ToolMHD-98B 9.5 mm Boring Tool (Use with XMax/eMax 2 Plus Only)MHD-97B 12.6 mm Boring Tool (Use with XMax/eMax 2 Plus Only)MHD-126B-3F 12.6 mm x 10.4 mm Boring Tool, 3 flutes (Use with XMax/eMax 2 Plus Only)
XM MM EM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-13
Anspach Standard Attachments and Dissection Tools
Heavy Duty Attachments — continued
LONG-HD 12.4 cm Heavy Duty Long Attachment The LONG-HD attachment is comparable in length to the Black Max B-BLUE-S.
LHD-3SB 3 mm Fluted Ball, StandardLHD-4B 4 mm Fluted Ball LHD-5B 5 mm Fluted Ball LHD-6B 6 mm Fluted Ball LHD-7B 7 mm Fluted Ball LHD-8NS 3 mm Fluted Matchstick LHD-8NS-M 3 mm Fluted Matchstick, Less AggressiveLHD-6AC 6 mm Fluted Acorn LHD-47-5 3.2 mm Fluted BellLHD-5DRM 5 mm x 8.4 mm Fluted DrumLHD-5DRM-12 5 mm x 12 mm Fluted DrumLHD-5DRM-L 5 mm x 16.2 mm Fluted DrumLHD-64DRM 6.4 mm Fluted DrumLHD-95DRM 9.5 mm Fluted DrumLHD-LS9-35 3.5 mm x 19.8 mm Fluted DrumLHD-LS9-5 4.7 mm x 20 mm Fluted DrumLHD-LS9-76 7.6 mm x 28.6 mm Fluted Drum
XL-HD 20.2 cm Heavy Duty Extra Long Attachment The XL-HD is comparable in length to the Black Max B-BLACK.
XLHD-3SB 3 mm Fluted Ball, StandardXLHD-4B 4 mm Fluted BallXLHD-5B 5 mm Fluted BallXLHD-6B 6 mm Fluted BallXLHD-7B 7 mm Fluted BallXLHD-9B 9 mm Fluted BallXLHD-55DC 5.5 mm Coarse Diamond BallXLHD-25R 2.15 mm x 25.4 mm Fluted RouterXLHD-8NS 3 mm Fluted MatchstickXLHD-8NS-M 3 mm Fluted Matchstick, Less AggressiveXLHD-6AC 6 mm Fluted AcornXLHD-75AC 7.5 mm Fluted AcornXLHD-51C 6.4 mm Fluted Cylindrical CarbideXLHD-95DRM 9.5 mm Fluted Drum
XM MM EM AnspachProducts
Illustrations not actual size
11/11
1-14
Black Max Standard Attachments and Dissection Tools
Straight Attachments
B-SILVER 6.1 cm Attachment
SIL-3 3 mm Fluted BallSIL-4 4 mm Fluted BallSIL-5 5 mm Fluted BallSIL-6 6 mm Fluted BallSIL-7 7 mm Fluted BallSIL-7-9 9 mm Fluted BallSIL-17-1 1 mm Diamond BallSIL-17-2 2 mm Diamond BallSIL-17-3 3 mm Diamond BallSIL-17-4 4 mm Diamond BallSIL-17-5 5 mm Diamond BallSIL-17-6 6 mm Diamond BallSIL-17-1C 1 mm Coarse Diamond BallSIL-17-2C 2 mm Coarse Diamond BallSIL-17-3C 3 mm Coarse Diamond BallSIL-17-4C 4 mm Coarse Diamond BallSIL-17-5C 5 mm Coarse Diamond BallSIL-17-6C 6 mm Coarse Diamond BallSIL-17-4CX 4 mm Extra Coarse Diamond BallSIL-17-5CX 5 mm Extra Coarse Diamond BallSIL-17-6CX 6 mm Extra Coarse Diamond BallSIL-0 1.12 mm x 6.35 mm Fluted RouterSIL-1-3 1.42 mm x 6.4 mm Fluted RouterSIL-1 1.85 mm x 16 mm Fluted RouterSIL-2 2.15 mm x 25.4 mm Fluted Router SIL-2XL 3.05 mm x 38.2 mm Fluted RouterSIL-1S 2.15 mm x 22 mm Fluted Spiral RouterSIL-2S 2.47 mm x 30.2 mm Fluted Spiral RouterSIL-3-10 1.93 mm Suture Pass Drill/1.17eye
SIL-8-18 1.8 mm Fluted MatchstickSIL-8 3 mm Fluted MatchstickSIL-8-M 3 mm Fluted Matchstick, Less AggressiveSIL-8D-32 3.2 mm Diamond MatchstickSIL-39 5 mm Fluted AcornSIL-24 6 mm Fluted AcornSIL-32 7.5 mm Fluted AcornSIL-38 9.2 mm Fluted AcornSIL-1510 1.55 mm x 10 mm Twist DrillSIL-464-4 Twist Drill for 2.0 mm x 4 mm ScrewSIL-466-6 Twist Drill for 2.0 mm x 6 mm ScrewSIL-DS-A 1.7 mm x 11.9 mm Twist Drill w/Depth Stop,
Aesculap®
SIL-47 6.2 mm Fluted Bell, Side Cut OnlySIL-9 6.4 mm Fluted DrumSIL-10 9.5 mm Fluted DrumSIL-11 12.7 mm Fluted DrumSIL-14-17 17 mm Diamond DiscSIL-14 25.4 mm Diamond DiscSIL-15 3.2 mm Carbide Fluted Side CutterSIL-16-5 5.56 mm Boring ToolSIL-16 6.7 mm Coring ToolSIL-16XL2 6.7 mm x 45 mm Coring ToolSIL-18 8.48 mm Boring ToolSIL-19 9.9 mm Coring ToolSIL-20 10.06 mm Boring ToolSIL-21 11.5 mm Coring ToolSIL-22 13.23 mm Boring ToolSIL-23 14.7 mm Coring Tool
B-TURQUOISE 5.9 cm Attachment
TURQ-3 3 mm Fluted BallTURQ-4 4 mm Fluted BallTURQ-5 5 mm Fluted BallTURQ-6 6 mm Fluted BallTURQ-7 7 mm Fluted BallTURQ-17-2 2 mm Diamond BallTURQ-17-3 3 mm Diamond BallTURQ-17-4 4 mm Diamond BallTURQ-17-5 5 mm Diamond BallTURQ-17-6 6 mm Diamond BallTURQ-17-2C 2 mm Coarse Diamond BallTURQ-17-5C 5 mm Coarse Diamond BallTURQ-17-4CX 4 mm Extra Coarse Diamond Ball
TURQ-17-5CX 5 mm Extra Coarse Diamond BallTURQ-17-6CX 6 mm Extra Coarse Diamond BallTURQ-0-1 .95 mm x 12.8 mm Fluted Router TURQ-1 1.4 mm x 12.8 mm Fluted RouterTURQ-8-18 1.8 mm Fluted MatchstickTURQ-8-23 2.3 mm Fluted MatchstickTURQ-8 3 mm Fluted MatchstickTURQ-8-M 3 mm Fluted Matchstick, Less AggressiveTURQ-8D-25 2.5 mm Diamond Matchstick TURQ-404-4 Twist Drill for 1.25 mm x 4 mm ScrewTURQ-406-6 Twist Drill for 1.25 mm x 6 mm ScrewTURQ-434-4 Twist Drill for 1.5 mm x 4 mm ScrewTURQ-436-6 Twist Drill for 1.5 mm x 6 mm Screw
BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-15AnspachProducts
Black Max Standard Attachments and Dissection Tools
Straight Attachments — continued
B-VIOLET 8.2 cm Attachment
VIO-7-2 2 mm Fluted BallVIO-3 3 mm Fluted BallVIO-4 4 mm Fluted BallVIO-5 5 mm Fluted BallVIO-6 6 mm Fluted BallVIO-7 7 mm Fluted BallVIO-7-9 9 mm Fluted BallVIO-17-1 1 mm Diamond BallVIO-17-2 2 mm Diamond BallVIO-17-3 3 mm Diamond BallVIO-17-4 4 mm Diamond BallVIO-17-5 5 mm Diamond BallVIO-17-6 6 mm Diamond BallVIO-17-3C 3 mm Coarse Diamond BallVIO-17-4C 4 mm Coarse Diamond BallVIO-17-5C 5 mm Coarse Diamond BallVIO-17-6C 6 mm Coarse Diamond BallVIO-17-4CX 4 mm Extra Coarse Diamond BallVIO-17-5CX 5 mm Extra Coarse Diamond BallVIO-17-6CX 6 mm Extra Coarse Diamond BallVIO-1 1.85 mm x 16 mm Fluted RouterVIO-2 2.15 mm x 25.4 mm Fluted RouterVIO-2XL 3.05 mm x 38.2 mm Fluted RouterVIO-40-4 4 mm x 8 mm Fluted OvalVIO-40-5 5 mm x 10 mm Fluted OvalVIO-40-55 5.5 mm x 10 mm Fluted OvalVIO-87-5 5 mm x 10 mm Fluted BarrelVIO-87-8 8 mm x 12.5 mm Fluted BarrelVIO-8-18 1.8 mm Fluted MatchstickVIO-8 3 mm Fluted MatchstickVIO-8-M 3 mm Fluted Matchstick, Less AggressiveVIO-8D-32 3.2 mm Diamond MatchstickVIO-39 5 mm Fluted AcornVIO-24 6 mm Fluted AcornVIO-32 7.5 mm Fluted AcornVIO-38 9.2 mm Fluted AcornVIO-9-5 5.6 mm Fluted DrumVIO-9 6.4 mm Fluted DrumVIO-10 9.5 mm Fluted DrumVIO-98B 9.5 mm Boring ToolVIO-98C 10.8 mm Coring ToolVIO-97B 12.6 mm Boring ToolVIO-97C 13.5 mm Coring ToolVIO-99C 16.8 mm Coring ToolVIO-14 25.4 mm Diamond Disc.
B-BLUE-S 11.25 cm Attachment
BLU-3 3 mm Fluted BallBLU-4 4 mm Fluted BallBLU-5 5 mm Fluted BallBLU-6 6 mm Fluted Ball BLU-7 7 mm Fluted BallBLU-7-9 9 mm Fluted BallBLU-17-1 1 mm Diamond BallBLU-17-2 2 mm Diamond BallBLU-17-3 3 mm Diamond BallBLU-17-4 4 mm Diamond BallBLU-17-5 5 mm Diamond BallBLU-17-6 6 mm Diamond BallBLU-1 1.85 mm x 16 mm Fluted Router BLU-2XL 3.05 mm x 38.2 mm Fluted RouterBLU-2S-25 2.8 mm x 22 mm Fluted Spiral RouterBLU-40-55 5.5 mm x 10 mm Fluted OvalBLU-8-18 1.8 mm Fluted MatchstickBLU-8 3 mm Fluted MatchstickBLU-8-M 3 mm Fluted Matchstick, Less AggressiveBLU-8D-32 3.2 mm Diamond MatchstickBLU-8D-32C 3.7 mm Coarse Diamond MatchstickBLU-39 5 mm Fluted AcornBLU-24 6 mm Fluted AcornBLU-32 7.5 mm Fluted AcornBLU-38 9.2 mm Fluted AcornBLU-47 6.2 mm Fluted Bell, Side Cut OnlyBLU-9-5 5.6 mm Fluted DrumBLU-9-68 6 mm x 8 mm Fluted DrumBLU-9 6.4 mm Fluted DrumBLU-10 9.5 mm Fluted DrumBLU-11 12.7 mm Fluted DrumBLU-9DCX 6.8 mm x 10.6 mm Extra Coarse Diamond DrumBLU-27 6.4 mm x 4.8 mm Fluted Drum, Side Cut OnlyBLU-CS5 5 mm x 14 mm Fluted Drum, Side Cut OnlyBLU-CS6 6 mm x 14 mm Fluted Drum, Side Cut OnlyBLU-CS7 7 mm x 14 mm Fluted Drum, Side Cut OnlyBLU-LS9-35 3.5 mm x 19.8 mm Fluted DrumBLU-LS9-5 4.7 mm x 20 mm Fluted DrumBLU-LS9-5E 4.7 mm x 20 mm Fluted Drum, Side Cut OnlyBLU-14 25.4 mm Diamond DiscBLU-51 6.4 mm Fluted Cylindrical Carbide
BM AnspachProducts
Illustrations not actual size
11/11
1-16
Black Max Standard Attachments and Dissection Tools
Straight Attachments — continued
B-TURQ-L 12.6 cm Tapered Attachment
TURQ-L3 3 mm Fluted BallTURQ-L4 4 mm Fluted BallTURQ-L5 5 mm Fluted BallTURQ-L6 6 mm Fluted BallTURQ-LS7 7 mm Fluted Ball, Extends 8.9 mmTURQ-L17-1 1 mm Diamond BallTURQ-L17-2 2 mm Diamond BallTURQ-L17-3 3 mm Diamond BallTURQ-L17-4 4 mm Diamond BallTURQ-L17-5 5 mm Diamond BallTURQ-L17-6 6 mm Diamond BallTURQ-L17-1C 1 mm Coarse Diamond BallTURQ-L17-2C 2 mm Coarse Diamond BallTURQ-L17-3C 3 mm Coarse Diamond BallTURQ-L17-4C 4 mm Coarse Diamond BallTURQ-L17-5C 5 mm Coarse Diamond BallTURQ-L17-6C 6 mm Coarse Diamond BallTURQ-L17-75C 7.5 mm Coarse Diamond BallTURQ-L17-4CX 4 mm Extra Coarse Diamond BallTURQ-L17-5CX 5 mm Extra Coarse Diamond BallTURQ-L17-6CX 6 mm Extra Coarse Diamond BallTURQ-L17-7CX 7 mm Extra Coarse Diamond BallTURQ-L1 1.4 mm x 12.8 mm Fluted RouterTURQ-L40-4 4 mm x 8 mm Fluted OvalTURQ-L40-5 5 mm x 10 mm Fluted OvalTURQ-L8-18 1.8 mm Fluted MatchstickTURQ-L8-23 2.3 mm Fluted MatchstickTURQ-L8 3 mm Fluted MatchstickTURQ-L8-L 3 mm Fluted Matchstick,
Extends 20.8 mmTURQ-L8-M 3 mm Fluted Matchstick, Less AggressiveTURQ-L8D-25 2.5 mm Diamond MatchstickTURQ-L8D-32L 3.2 mm Diamond Matchstick,
Extends 28.5 mmTURQ-L9-58 5 mm x 8.4 mm Fluted Drum
B-BLACK 19 cm Attachment
BLA-3 3 mm Fluted BallBLA-4 4 mm Fluted BallBLA-5 5 mm Fluted BallBLA-6 6 mm Fluted BallBLA-7 7 mm Fluted BallBLA-7-9 9 mm Fluted BallBLA-1 1.85 mm x 16 mm Fluted RouterBLA-2 2.15 mm x 25.4 mm Fluted RouterBLA-8 3 mm Fluted MatchstickBLA-24 6 mm Fluted AcornBLA-32 7.5 mm Fluted AcornBLA-38 9.2 mm Fluted AcornBLA-9 6.4 mm Fluted DrumBLA-10 9.5 mm Fluted DrumBLA-11 12.7 mm Fluted DrumBLA-14 25.4 mm Diamond DiscBLA-15 3.2 mm Fluted Carbide Side CutterBLA-51 6.4 mm Fluted Cylindrical Carbide
BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-17
Black Max Standard Attachments and Dissection Tools
Straight Attachments — continued
B-RED 26.65 cm Attachment
RED-3 3 mm Fluted BallRED-4 4 mm Fluted BallRED-5 5 mm Fluted BallRED-6 6 mm Fluted BallRED-7 7 mm Fluted BallRED-7-9 9 mm Fluted BallRED-17-55C 5.5 mm Coarse Diamond BallRED-17-75C 7.5 mm Coarse Diamond BallRED-1 1.85 mm x 16 mm Fluted RouterRED-2 2.15 mm x 25.4 mm Fluted RouterRED-8 3 mm Fluted MatchstickRED-24 6 mm Fluted AcornRED-32 7.5 mm Fluted AcornRED-38 9.2 mm Fluted AcornRED-9 6.4 mm Fluted DrumRED-10 9.5 mm Fluted DrumRED-11 12.7 mm Fluted Drum
B-GREY-MIA16 16 cm MIA
GREY-MIA16-3 3 mm Fluted BallGREY-MIA16-4 4 mm Fluted BallGREY-MIA16-17-2 2 mm Diamond BallGREY-MIA16-17-3 3 mm Diamond BallGREY-MIA16-17-4C 4 mm Coarse Diamond BallGREY-MIA16-8 3 mm Fluted Matchstick
B-GREY-MIA20 20 cm MIA
GREY-MIA20-3 3 mm Fluted BallGREY-MIA20-4 4 mm Fluted BallGREY-MIA20-7 7 mm Fluted BallGREY-MIA20-7-9 9 mm Fluted BallGREY-MIA20-17-3 3 mm Diamond BallGREY-MIA20-17-4 4 mm Diamond Ball GREY-MIA20-17-2C 2 mm Coarse Diamond Ball GREY-MIA20-17-3C 3 mm Coarse Diamond BallGREY-MIA20-17-4C 4 mm Coarse Diamond Ball GREY-MIA20-17-75C 7.5 mm Coarse Diamond BallGREY-MIA20-8 3 mm Fluted Matchstick
Minimally Invasive Attachments (MIA)
BM
BM
AnspachProducts
Illustrations not actual size
11/11
1-18
Black Max Standard Attachments and Dissection ToolsCraniotomes, Specialty, MRA, and Contra and Right Angle Attachments Attachments
CraniotomesB-TURQ-X Pediatric CraniotomeTURQ-1-M 1.3 mm x 12.8 mm Fluted RouterTURQ-1 1.4 mm x 12.8 mm Fluted Router
B-GOLD Large CraniotomeGOL-2S 2.47 mm x 30.3 mm Fluted Spiral RouterGOL-2 2.5 mm x 25.4 mm Fluted Router
B-GREEN Standard CraniotomeGRE-1 1.85 mm x 16 mm Fluted RouterGRE-1-M 2 mm x 15.6 mm Fluted RouterGRE-1S 2.15 mm x 22 mm Fluted Spiral Router
B-GREEN-R Rotating Green CraniotomeGRE-1 1.85 mm x 16 mm Fluted RouterGRE-1-M 2 mm x 15.6 mm Fluted RouterGRE-1S 2.15 mm x 22 mm Fluted Spiral Router
Specialty AttachmentsB-GREY-ADG 8.7 cm Adjustable Drill Guide (ADG)
GREY-471-25 1.0 mm Twist Drill for 1.25mm ScrewGREY-471-50 1.1 mm Twist Drill for 1.5mm ScrewGREY-471-70 1.3 mm Twist Drill for 1.7mm ScrewGREY-472-00 1.55 mm Twist Drill for 2.0mm Screw
B-TURQ-CDA 7.7 cm Controlled Depth Adjusts 1 mm-4 mm increment, Attachment (CDA)
TURQ-1 1.4 mm x 12.8 mm Fluted Router
Micro Revision Attachments (MRA)B-MRA-S 9.4 cm Revision AttachmentB-MRA-M 16.5 cm Revision AttachmentB-MRA-L 22 cm Revision Attachment
MRA-8S 2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-SMRA-8M 2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-MMRA-8L 2.3 mm x 4.5 mm Fluted Matchstick for B-MRA-L
Contra and Right AnglesB-ORANGE-45 45˚ Contra Angle Attachment Multiple Angle
B-ORANGE-90 0˚ Right Angle Attachment
ORNG-35 2.3 mm Fluted BallORNG-36 2.9 mm Fluted BallORNG-1 11.1 mm Fluted RouterORNG-8-18 1.8 mm Fluted MatchstickORNG-33 10.5 mm Small Bone Burr ORNG-1275 1.2 mm x 7.5 mm Twist DrillORNG-37 1.8 mm Fluted Drum
BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-19
Micro Curved Attachment (MCA) and Dissection Tools
MCA
MCA Micro Curved Attachment
MCA5-05SD 0.5 mm Diamond Ball, 5.6 cm MCA5-06SD 0.6 mm Diamond Ball, 5.6 cm MCA5-07SD 0.7 mm Diamond Ball, 5.6 cm MCA5-08SD 0.8 mm Diamond Ball, 5.6 cm MCA5-1SD 1 mm Diamond Ball, 5.6 cm MCA5-15SD 1.5 mm Diamond Ball, 5.6 cm MCA5-2SD 2 mm Diamond Ball, 5.6 cm MCA5-1SB 1 mm Fluted Ball, 5.6 cm MCA5-15SB 1.5 mm Fluted Ball, 5.6 cm MCA5-2SB 2 mm Fluted Ball, 5.6 cm MCA7-05SD 0.5 mm Diamond Ball, 7.3 cm MCA7-06SD 0.6 mm Diamond Ball, 7.3 cm MCA7-07SD 0.7 mm Diamond Ball, 7.3 cm MCA7-08SD 0.8 mm Diamond Ball, 7.3 cm MCA7-1SD 1 mm Diamond Ball, 7.3 cm MCA7-15SD 1.5 mm Diamond Ball, 7.3 cm MCA7-2SD 2 mm Diamond Ball, 7.3 cm MCA7-1SB 1 mm Fluted Ball, 7.3 cm MCA7-15SB 1.5 mm Fluted Ball, 7.3 cm MCA7-2SB 2 mm Fluted Ball, 7.3 cm
XM MM EM AnspachProducts
Illustrations not actual size
11/11
1-20An
spac
hPr
oduc
ts
MA Attachments and Dissection Tools
Minimal Access Attachments
MA-D20 20° Angle DriverMA-DRIVER Minimal Access Straight DriverMA-D20BM 20° Angle Driver
MA-10S Bearing Sleeve, 10 cm StraightMA-10C Bearing Sleeve, 10 cm Curved
MA10-1SB 1 mm Fluted Ball, 10 cmMA10-15SB 1.5 mm Fluted Ball, 10 cmMA10-2SB 2 mm Fluted Ball, 10 cmMA10-25SB 2.5 mm Fluted Ball, 10 cmMA10-3SB 3 mm Fluted Ball, 10 cmMA10-08SD 0.8 mm Diamond Ball, 10 cmMA10-2SD 2 mm Diamond Ball, 10 cmMA10-3SD 3 mm Diamond Ball, 10 cmMA10-4D 4 mm Diamond Ball, 10 cmMA10-8N-18 1.8 mm Fluted Matchstick, 10 cmMA10-8N 2.3 mm Fluted Matchstick, 10 cmMA10-8NS 3 mm Fluted Matchstick, 10 cmMA10-8NSDC 3 mm Coarse Diamond Matchstick, 10 cm
15 cm
15 cm
4.8 mm 4 mm3.3 mm
MA-15S Bearing Sleeve, 15 cm StraightMA-15C Bearing Sleeve, 15 cm CurvedMA-15ST Bearing Sleeve, 15 cm Straight TaperMA-19ST Bearing Sleeve, 19 cm Straight Taper
MA15-2SB 2 mm Fluted Ball, 15 cmMA19-2SB 2 mm Fluted Ball, 19 cmMA15-3SB 3 mm Fluted Ball, 15 cmMA19-3SB 3 mm Fluted Ball, 19 cmMA15-15SD 1.5 mm Diamond Ball, 15 cmMA19-15SD 1.5 mm Diamond Ball, 19 cmMA15-2SD 2 mm Diamond Ball, 15 cmMA19-2SD 2 mm Diamond Ball, 19 cmMA15-3SD 3 mm Diamond Ball, 15 cmMA19-3SD 3 mm Diamond Ball, 19 cmMA15-4D 4 mm Diamond Ball, 15 cmMA19-4D 4 mm Diamond Ball, 19 cmMA15-4DC 4 mm Coarse Diamond Ball, 15 cmMA15-8N-18 1.8 mm Fluted Matchstick, 15 cmMA19-8N-18 1.8 mm Fluted Matchstick, 19 cmMA15-8N 2.3 mm Fluted Matchstick, 15 cmMA19-8N 2.3 mm Fluted Matchstick, 19 cmMA15-8NS 3 mm Fluted Matchstick, 15 cmMA19-8NS 3 mm Fluted Matchstick, 19 cmMA15-8NSDC 3 mm Coarse Diamond Matchstick, 15 cmMA19-8NSDC 3 mm Coarse Diamond Matchstick, 19 cm
XM MM BM EM
BM
XM MM EM
XM MM EM
Illustrations not actual size
11/11
1-21AnspachProducts
Angle Attachments and Dissection Tools
Quick Disconnect (QD) Angle Attachments
Standard length cutting burrs extend approximately 16 mm from the distal end of the attachment.Extended length cutting burrs extend approximately 27 mm from the distal end of the attachment.
7.5 cm, 8 cm
QD8-S 7.5 cm Angle AttachmentB-QD8-S 7.5 cm Angle AttachmentQD8 8 cm Angle AttachmentB-QD8 8 cm Angle Attachment
QD8-05B 0.5 mm Fluted Ball, ExtendedQD8-1SB 1 mm Fluted BallQD8-15SB 1.5 mm Fluted BallQD8-2SB 2 mm Fluted BallQD8-25SB 2.5 mm Fluted BallQD8-3SB 3 mm Fluted BallQD8-4B 4 mm Fluted BallQD8-5B 5 mm Fluted BallQD8-5B-2 5 mm Fluted Ball, 2 mm Shaft ExposureQD8-6B 6 mm Fluted BallQD8-7B 7 mm Fluted BallQD8-05SD 0.5 mm Diamond BallQD8-1SD 1 mm Diamond BallQD8-15SD 1.5 mm Diamond BallQD8-2SD 2 mm Diamond BallQD8-25SD 2.5 mm Diamond BallQD8-3SD 3 mm Diamond BallQD8-3SD-100 3 mm Diamond Ball, 100/120 GritQD8-35SD 3.5 mm Diamond BallQD8-4D 4 mm Diamond BallQD8-5D 5 mm Diamond BallQD8-5D-2 5 mm Diamond Ball,
2 mm Shaft ExposureQD8-6D 6 mm Diamond BallQD8-1SDC 1 mm Coarse Diamond BallQD8-15SDC 1.5 mm Coarse Diamond Ball,
120/140 Grit
QD8-2SDC 2 mm Coarse Diamond BallQD8-25SDC 2.5 mm Coarse Diamond BallQD8-3SDC 3 mm Coarse Diamond BallQD8-35SDC 3.5 mm Coarse Diamond BallQD8-4DC 4 mm Coarse Diamond BallQD8-5DC 5 mm Coarse Diamond BallQD8-6DC 6 mm Coarse Diamond BallQD8-4DX 4 mm Extra Coarse Diamond BallQD8-5DX 5 mm Extra Coarse Diamond BallQD8-6DX 6 mm Extra Coarse Diamond BallQD8-1R 1.4 mm x 12.8 mm Fluted RouterQD8-4OV 4 mm x 8 mm Fluted OvalQD8-4OVD 4 mm x 8 mm Diamond Oval QD8-5OV 5 mm x 10 mm Fluted OvalQD8-8N-18 1.8 mm Fluted MatchstickQD8-8N 2.3 mm Fluted MatchstickQD8-8NS 3 mm Fluted MatchstickQD8-8ND 2.5 mm Diamond MatchstickQD8-5AC 5 mm Fluted AcornQD8-6AC 6 mm Fluted AcornQD8-4DRM 4 mm x 8.9 mm Fluted Drum,
Side Cut OnlyQD8-62DRM 6.2 mm x 4.6 mm Fluted Drum,
Side Cut Only QD8-62BE 6.2 mm Fluted Bell, Side Cut OnlyQD8-5BA 5 mm x 10 mm Fluted Barrel
XM MM BM EM
XM MM EM
XM MM EM
BM
BM
Illustrations not actual size
11/11
1-22
Angle Attachments and Dissection Tools
Quick Disconnect (QD) Angle Attachments — continued
QD11-S 10.5 cm Angle AttachmentB-QD11-S 10.5 cm Angle AttachmentQD11 11 cm Angle AttachmentB-QD11 11 cm Angle Attachment
QD11-1SB 1 mm Fluted BallQD11-2SB 2 mm Fluted BallQD11-3SB 3 mm Fluted BallQD11-4B 4 mm Fluted BallQD11-5B 5 mm Fluted BallQD11-5B-A 5 mm Fluted Ball, Less AggressiveQD11-6B 6 mm Fluted BallQD11-7B 7 mm Fluted BallQD11-1SD 1 mm Diamond BallQD11-2SD 2 mm Diamond BallQD11-3SD 3 mm Diamond BallQD11-4D 4 mm Diamond Ball QD11-5D 5 mm Diamond BallQD11-6D 6 mm Diamond BallQD11-3SDC 3 mm Coarse Diamond BallQD11-4DC 4 mm Coarse Diamond BallQD11-5DC 5 mm Coarse Diamond BallQD11-6DC 6 mm Coarse Diamond BallQD11-4DX 4 mm Extra Coarse Diamond BallQD11-5DX 5 mm Extra Coarse Diamond BallQD11-6DX 6 mm Extra Coarse Diamond BallQD11-7DX 7 mm Extra Coarse Diamond BallQD11-1R 1.4 mm x 12.8 mm Fluted RouterQD11-4OV 4 mm x 8 mm Fluted Oval
QD11-4OVD 4 mm x 8 mm Diamond OvalQD11-4OVDC 4 mm x 8 mm Coarse Diamond OvalQD11-5OV 5 mm x 10 mm Fluted OvalQD11-8N-18 1.8 mm Fluted MatchstickQD11-8N 2.3 mm Fluted MatchstickQD11-8NS 3 mm Fluted MatchstickQD11-8NS-M 3 mm Fluted Matchstick, Less AggressiveQD11-8ND 2.5 mm Diamond MatchstickQD11-8NSDC 3.2 mm Coarse Diamond MatchstickQD11-4AC 4 mm Fluted AcornQD11-5AC 5 mm Fluted AcornQD11-6AC 6 mm Fluted AcornQD11-4DRM 4 mm x 8.9 mm Fluted Drum, Side Cut
OnlyQD11-5DRM 5 mm x 8.4 mm Fluted DrumQD11-62DRM 6.2 mm x 4.6 mm Fluted Drum, Side Cut
OnlyQD11-45DRMDX 4 mm x 5 mm Extra Coarse Diamond
DrumQD11-3BA-A 3 mm x 11 mm Fluted Barrel, 14 FlutesQD11-4BA-A 4 mm x 11 mm Fluted Barrel, 14 FlutesQD11-5BA-A 5 mm x 11.3 mm Fluted BarrelQD11-6BA-A 6 mm x 11.3 mm Fluted Barrel
10.5 cm, 11 cm
QD14-S 13.5 cm Angle AttachmentB-QD14-S 13.5 cm Angle AttachmentQD14 14 cm Angle AttachmentB-QD14 14 cm Angle Attachment
QD14-3SB 3 mm Fluted BallQD14-4B 4 mm Fluted BallQD14-5B 5 mm Fluted BallQD14-5B-A 5 mm Fluted Ball, Less AggressiveQD14-6B 6 mm Fluted BallQD14-1SD 1 mm Diamond BallQD14-2SD 2 mm Diamond BallQD14-3SD 3 mm Diamond BallQD14-4D 4 mm Diamond BallQD14-5D 5 mm Diamond BallQD14-6D 6 mm Diamond Ball
QD14-4DC 4 mm Coarse Diamond BallQD14-5DC 5 mm Coarse Diamond BallQD14-6DX 6 mm Extra Coarse Diamond BallQD14-4OV 4 mm x 8mm Fluted OvalQD14-8N-18 1.8 mm Fluted MatchstickQD14-8N 2.3 mm Fluted MatchstickQD14-8NS 3 mm Fluted MatchstickQD14-8ND 2.5 mm Diamond MatchstickQD14-47DRM 4.7 mm x 8 mm Fluted DrumQD14-4BA 4 mm x 8 mm Fluted Barrel
13.5 cm, 14 cm
XM MM EM
XM MM EM
BM
BM
XM MM EM
XM MM EM
BM
BM
XM MM BM EM
Ansp
ach
Prod
ucts
O-SAW Oscillating microSaw Attachment or drivers on page 1-24 Speed: 12,000 cpm Arc: 6°
MO-3001 28.5 mm x 5.5 mm Oscillating Micro BladeMO-3002 31 mm x 10 mm Oscillating Micro BladeMO-3003 21 mm x 5.5 mm Oscillating Micro BladeMO-3005 18.5 mm x 10 mm Oscillating Micro BladeMO-3006 14 mm x 5.5 mm Oscillating Micro BladeMO-3105 18.5 mm x 9 mm Oscillating Micro BladeMO-3225 31 mm x 9 mm Oscillating Micro BladeMO-3515 42 mm x 13.3 mm Oscillating Micro Blade
R-SAW Reciprocating microSaw or drivers on page 1-24 Speed: 12,000 cpm Axial Travel: 0.1 in (2.5 mm)
MR-0500 6.6 mm, 9th/cm Reciprocating Micro Blade, 0.5 mm ThickMR-0520 22.9 mm, 9th/cm Reciprocating Micro Blade, 0.5 mm ThickMR-0540 25.1 mm, 14th/cm Reciprocating Micro Blade, 0.4 mm ThickMR-0560 15 mm, 13th/cm Reciprocating Micro Blade, 0.25 mm ThickMR-0580 21.35 mm, 13th/cm Reciprocating Micro Blade, 0.25 mm ThickMR-0600 25.4 mm, 9th/cm Reciprocating Micro Blade, 0.4 mm ThickMR-14006 39.5 mm, 9th/cm Reciprocating Micro Blade, 0.5 mm Thick
S-SAW Sagittal microSaw Attachment or drivers on page 1-24 Speed: 12,000 cpm Arc: 6°
MS-3101 25.5 mm x 9.5 mm Sagittal Micro BladeMS-3102 25.5 mm x 4.5 mm Sagittal Micro BladeMS-3104 15.2 mm x 9.5 mm Sagittal Micro BladeMS-3105 18.5 mm x 9 mm Sagittal Micro BladeMS-3106 25.5 mm x 5.5 mm Sagittal Micro BladeMS-3108 34 mm x 4 mm Sagittal Micro BladeMS-3101C 25.5 mm x 9.5 mm Coarse Sagittal Micro BladeMS-3225 31 mm x 9 mm Sagittal Micro BladeMS-3515 42 mm x 13.3 mm Sagittal Micro Blade
Illustrations not actual size
11/11
1-23
Saw Attachments and Saw Blades
microSaws
E12
E12
E12
XM MM BM EM E12 AnspachProducts
Illustrations not actual size
11/11
1-24
Saw Attachments and Saw Blades
Small Attachments: J-Latch and Jacobs Chuck
SA-JLATCH Small Attachment, J-Latch or drivers below
SA-JACOBS Small Attachment, Jacobs Chuck or drivers below
Drivers
DRIVER Keyless Driver BM-DRIVER Keyless Driver
E12
E12
XM MM EM
BM
Ansp
ach
Prod
ucts
Illustrations not actual size
11/11
1-25
Saw Attachments and Saw Blades
Sagittal Saws
MM-SAGITTAL Sagittal SawB-SAGITTAL Sagittal Saw
LS-3405 5 mm x 20 mm Graft Harvesting BladeLS-3406 6 mm x 20 mm Graft Harvesting BladeLS-3407 7 mm x 20 mm Graft Harvesting BladeLS-3408 8 mm x 20 mm Graft Harvesting BladeLS-3409 9 mm x 20 mm Graft Harvesting BladeLS-3410 10 mm x 2 0mm Graft Harvesting BladeLS-3411 11 mm x 20 mm Graft Harvesting BladeLS-3412 12 mm x 20 mm Graft Harvesting BladeLS-3413 13 mm x 20 mm Graft Harvesting BladeMS-3100C 41 mm x 14 mm Coarse Sagittal Saw BladeMS-3231 41 mm x 19.5 mm Sagittal Saw BladeMS-3240 41 mm x 9.5 mm Sagittal Saw Blade
XM MM EM
BM
AnspachProducts
Illustrations not actual size
11/11
1-26
Saw Attachments and Saw Blades
Saw Blades
Graft Harvesting Blades
LS-3405
LS-3406
LS-3407
LS-3408
LS-3409
LS-3410
LS-3411
LS-3412
LS-3413
MS-3100C
MS-3231
MS-3240
Sagittal Blades
Sagittal Saw Blades (E-SAGITTAL, B-SAGITTAL, MM-SAGITTAL only)
20mm
5mm
41mm
14mm
}
Micro Oscillating Saw Blades (O-SAW)
Micro Reciprocating Saw Blades (R-SAW)
MS-3101
MS-3101C
MS-3102
MS-3104
MS-3105
MS-3106
MS-3108
MS-3225
MS-3515
MO-3001
MO-3002
MO-3003
MO-3105
MO-3005
MO-3006
MO-3225
MO-3515
Micro Sagittal Saw Blades (S-SAW)
Microsaw Blades (S-SAW, O-SAW, R-SAW)
mm
MR-0500
MR-0520
MR-0540
MR-0560
MR-14006
MR-0580
MR-0600
Saw Blade StylesAll saw blades are supplied sterile and are designed for single use only.
Ansp
ach
Prod
ucts
B-COLLECTOR-1 Bone Collector (Qty. 1)
B-COLLECTOR-BX Bone Collector (Qty. 12)
Compact SpeedReducer
CSR60 Perforator Driver with Hudson End (60:1 Ratio, approx. 1,300 rpm) 5.8 in. long, 1.5 in. diameter, 0.8 lbs.
CSRSC Storage Cover, Drive Shaft Protector Replacement
CSR60BM Perforator Driver with Hudson End (60:1 Ratio, approx. 1,300 rpm) 5.1 in. long, 1.5 in. diameter, 0.8 lbs.
CSRSC-BM Storage Cover, Drive Shaft Protector Replacement
Cranial Perforator
CPERF-14-11-3F 14-11 mm Cranial Perforator
Illustrations not actual size
11/11
1-27
Additional Surgical Instruments and Accessories
Bone Collector
XM
BM
MM EM
AnspachProducts
Illustrations not actual size
11/11
1-28An
spac
hPr
oduc
tsAdditional Surgical Instruments and Accessories
Couplers
COUPLER Coupler for Anspach MotorsTo couple with Midas Rex Legend® Bone Mill
BM-COUPLER Coupler for Black Max Handpiece To couple with Midas Rex Legend® Bone Mill
KAM SuperSucker Disposable Suction Tips/Filters
KAM SuperSucker Disposable Suction Tips/Filters
SS1 Super Sucker Long (BX/20)SS2 Super Sucker Short (BX/20)SS2C Super Sucker Short Curved (BX/20)
XM
BM
MM EM
Illustrations not actual size
11/11
1-29
Cutting Burr Styles
Standard and Extended Styles
OVAL BARREL
FLUTED BALL
MATCHSTICK
DIAMOND BALL
ACORN
COARSE DIAMOND BALL
PEAR SHAPED
EXTRA COARSE DIAMOND BALL
TWIST DRILL CORING/BORING
ROUTER
ADG
DIAMOND DISCCARBIDE
DRUM
FlutedFluted
Diamond
Fluted Fluted
Fluted
Fluted
Diamond
Fluted
Side Cut Only
S-15DRMC
Diamond
Fluted
Fluted Spiral
Wire Threader
Fluted
DS-A
Fluted, inverted
Diamond
Cutting burrs are pictured for head styles only. Please refer to your cutting burr chart for available lengths and additional detail. All cutting burrs are supplied sterile unless otherwise indicated and are designed for single use only.
STANDARD AND EXTENDED STYLESStandard length cutting burrs extendapproximately 16 mm from the distalend of the attachment. Extended lengthcutting burrs extend approximately 27 mmfrom the distal end of the attachment
The extended length offers the surgeongreater visibility of the cutter head style.
Standard
Extended
AnspachProducts
Illustrations not actual size
11/11
2-1
Synthes Power Equipment
Air Pen Drive Sets ........................................................................................ 2-2
Electric Pen Drive Sets .................................................................................. 2-4
Air Pen Drive and Accessories ...................................................................... 2-5
Electric Pen Drive and Accessories ................................................................ 2-6
Small Battery Drive Sets ............................................................................... 2-11
Small Battery Drive and Accessories ............................................................. 2-12
Trauma Recon System Set ............................................................................ 2-16
Trauma Recon System and Accessories......................................................... 2-17
Battery Power Line Sets................................................................................ 2-21
Battery Power Line and Accessories.............................................................. 2-23
ComPact Air Drive II Set ............................................................................... 2-26
ComPact Air Drive II and Accessories............................................................ 2-27
Oscillating Bone Saw ................................................................................... 2-29
Universal Battery Charger II and Batteries..................................................... 2-30
Attachments and Accessories ...................................................................... 2-32
Chucks and Replacement Keys..................................................................... 2-34
Double Air Hoses ......................................................................................... 2-35
Autoclavable Oil, Regulators and Fitting....................................................... 2-36
Saw Blades .................................................................................................. 2-37
Cutting Tools for Electric Pen Drive and Air Pen Drive................................... 2-44
Accessories for Mini Compressed Air Machine ............................................. 2-51
Graphic Cases.............................................................................................. 2-52
Compartmental Pressure Monitoring System................................................ 2-55
For operating and care instructions for Synthes power equipment, refer to the User’s Manual and Cleaning and SterilizationCharts for each specific product.
Synthes Power
Equipment
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-2
01.001.594 Air Pen Drive Set
Air Pen Drive SetsSy
nthe
s Pow
erEq
uipm
ent
60.550.050 Three-Level Graphic Case for Air Pen Drive
Instruments05.001.028 Screw Attachment, AO Coupling, for Pen Drive05.001.030 Drill Attachment, Mini Quick Coupling, for Pen Drive05.001.031 Drill Attachment, J-Latch Coupling, for Pen Drive05.001.032 Drill Attachment, AO Coupling, for Pen Drive05.001.034 Screw Attachment, Mini Quick Coupling, for Pen Drive05.001.037 K-Wire Attachment for Pen Drive05.001.038 Oscillating Saw Attachment for Pen Drive05.001.039 Sagittal Saw Attachment for Pen Drive05.001.040 Reciprocating Saw Attachment for Pen Drive05.001.045 Burr Attachment, Short, for Pen Drive05.001.046 Burr Attachment, Medium, for Pen Drive05.001.050 Burr Attachment, Long-Angled, for Pen Drive05.001.066 Irrigation Nozzle, Short, for Pen Drive05.001.067 Irrigation Nozzle, Medium, for Pen Drive05.001.068 Irrigation Nozzle, Long, for Pen Drive05.001.070 Irrigation Nozzle for Sagittal Saw Attachment05.001.071 Irrigation Nozzle for Reciprocating Saw Attachment05.001.074 Handhold for Tool Change for Pen Drive Attachments05.001.080 Air Pen Drive05.001.081 Foot Switch, for Air Pen Drive05.001.082 Hand Switch, for Air Pen Drive05.001.084 Double Air Hose, for Air Pen Drive, 5 meters05.001.085 Angled Coupling, for Air Pen Drive05.001.086 Protective Cap, for Air Pen Drive05.001.089 Adaptor for Maintenance Station, for Air Pen Drive05.001.090 Irrigation Flow Control Unit, for Air Pen Drive05.001.091 Seal Nipple for Double Air Hose, for Air Pen Drive05.001.099 Maintenance Station for Pen Drive05.001.120 Drill Attachment with Jacobs Chuck for Pen Drive05.001.121 Guide for K-Wires for Pen Drive for Oscillating Saw Attachment
Illustrations not actual size
11/11
2-3
Graphic Case60.550.050 Three-Level Graphic Case for Air Pen Drive
Instruments05.001.028 Screw Attachment, AO Coupling, for Pen Drive05.001.030 Drill Attachment, Mini Quick Coupling, for Pen Drive05.001.031 Drill Attachment, J-Latch Coupling, for Pen Drive05.001.032 Drill Attachment, AO Coupling, for Pen Drive05.001.034 Screw Attachment, Mini Quick Coupling, for Pen Drive05.001.037 K-Wire Attachment for Pen Drive05.001.038 Oscillating Saw Attachment for Pen Drive05.001.039 Sagittal Saw Attachment for Pen Drive05.001.040 Reciprocating Saw Attachment for Pen Drive05.001.045 Burr Attachment, Short, for Pen Drive05.001.046 Burr Attachment, Medium, for Pen Drive05.001.074 Handhold for Tool Change for Pen Drive Attachments05.001.080 Air Pen Drive05.001.081 Foot Switch, for Air Pen Drive05.001.082 Hand Switch, for Air Pen Drive05.001.084 Double Air Hose, for Air Pen Drive, 5 meters05.001.085 Angled Coupling, for Air Pen Drive05.001.086 Protective Cap, for Air Pen Drive05.001.089 Adaptor for Maintenance Station, for Air Pen Drive05.001.091 Seal Nipple for Double Air Hose, for Air Pen Drive05.001.099 Maintenance Station for Pen Drive
01.001.595 Air Pen Drive Set — Hand & Foot
Air Pen Drive SetsSynthes Pow
erEquipm
ent
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-4
Electric Pen Drive Sets01.001.580 Electric Pen Drive Set01.001.581 Electric Pen Drive Hand and Foot Set
690.580 Graphic Case, for Electric Pen Drive
Instruments in set 01.001.58005.001.000 Standard Console with irrigation,
for Electric Pen Drive05.001.010 Electric Pen Drive, 60,000 RPM05.001.012 Hand Switch, for Electric Pen Drive05.001.016 Foot Switch, 1 pedal, for Electric Pen Drive05.001.021 Cable Electric Pen Drive, 4M, to Console05.001.022 Cable Foot Switch, to Console05.001.027 Seal Nipple for Cables05.001.028 Screw Attachment AO coupling05.001.029 Screw Attachment, hex coupling05.001.030 Drill Attachment, mini quick coupling05.001.031 Drill Attachment, J-Latch coupling05.001.032 Drill Attachment, AO coupling05.001.033 45° Oscillating Drill Attachment,
mini quick coupling05.001.034 Screw Attachment, mini quick coupling05.001.035 90° Drill Attachment, short, mini quick coupling05.001.036 90° Drill Attachment, long, mini quick coupling05.001.037 K-Wire Attachment, for Pen Drive05.001.038 Oscillating Saw Attachment, for Pen Drive05.001.039 Sagittal Saw Attachment, for Pen Drive05.001.040 Reciprocating Saw Attachment, for Pen Drive05.001.042 45° Drilling Attachment, mini quick coupling05.001.043 45° Drilling Attachment, J-Latch coupling05.001.044 45° Drilling Attachment, AO coupling05.001.045 Burr Attachment, short05.001.046 Burr Attachment05.001.047 Burr Attachment05.001.048 Burr Attachment, short, angled05.001.049 Burr Attachment05.001.050 Burr Attachment05.001.051 Dura Guard, short, for Pen Drive05.001.052 Dura Guard, medium, for Pen Drive05.001.053 Dura Guard, long, for Pen Drive05.001.054 Perforator, for Pen Drive05.001.059 Craniotome Attachment, for Pen Drive05.001.066 Irrigation Nozzle, Short05.001.067 Irrigation Nozzle, Medium05.001.068 Irrigation Nozzle, Long05.001.070 Irrigation Nozzle for Sagittal Saw Attachment
05.001.071 Irrigation Nozzle for Reciprocating Saw Attachment05.001.074 Handhold for Tool Change for Attachments,
for Pen Drive05.001.076 Irrigation Nozzle, for perforator 05.001.05405.001.099 Maintenance Station05.001.104 Pneumatic Connection, DISS Coupling for
05.001.09905.001.105 Pneumatic Connection, Schrader Coupling for
05.001.09905.001.108 Light Adaptor05.001.110 Drill Attachment, hexagonal05.001.111 Irrigation Nozzle for Electric Pen Drive,
hexagonal drilling attachment05.001.120 Drill Attachment with Jacobs Chuck05.001.121 Guide for K-wires for Pen Drive, for Oscillating
Saw Attachment05.001.177 Perforator, Hudson coupling, for Pen Drive
Instruments in set 01.001.58105.001.000 Standard Console with irrigation,
for Electric Pen Drive05.001.010 Electric Pen Drive, 60,000 RPM05.001.012 Hand Switch, for Electric Pen Drive05.001.016 Foot Switch, 1 pedal, for Electric Pen Drive05.001.021 Cable Electric Pen Drive, 4M, to Console05.001.022 Cable Foot Switch, to Console05.001.027 Seal Nipple for Cables05.001.028 Screw Attachment AO coupling05.001.030 Drill Attachment, mini quick coupling05.001.031 Drill Attachment, J-Latch coupling05.001.032 Drill Attachment, AO coupling05.001.034 Screw Attachment, mini quick coupling05.001.037 K-Wire Attachment, for Pen Drive05.001.038 Oscillating Saw Attachment, for Pen Drive05.001.039 Sagittal Saw Attachment, for Pen Drive05.001.040 Reciprocating Saw Attachment, for Pen Drive05.001.045 Burr Attachment, short05.001.046 Burr Attachment05.001.074 Handhold for Tool Change for Attachments,
for Pen Drive05.001.099 Maintenance Station
Also available: Modular cases for Electric Pen Drive (see page 2-52)
Synt
hes P
ower
Equi
pmen
t
Air Pen Drive
Air Pen Drive
Air Pen Drive Accessories
05.001.080 Air Pen Drive
05.001.081 Foot Switch, for Air Pen Drive
05.001.082 Hand Switch, for Air Pen Drive
Double Air Hoses05.001.083 3 meters05.001.084 5 meters
Air Pen Accessories05.001.085 Angled Coupling, for Air Pen Drive05.001.086 Protective Cap, for Air Pen Drive05.001.087 Adaptor, Schrader/Synthes05·001.088 Adaptor, Draeger/Synthes05.001.089 Adaptor for Maintenance Station, for Air Pen Drive05.001.090 Irrigation Flow Control Unit, for Air Pen Drive05.001.091 Seal Nipple for Double Air Hose, for Air Pen Drive
05.001.083
05.001.085
Illustrations not actual size
11/11
2-5Synthes Pow
erEquipm
ent
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-6Sy
nthe
sPo
wer
Equi
pmen
tElectric Pen Drive
Electric Pen Drive
05.001.010 Electric Pen Drive, 60,000 rpm
Consoles05.001.000 Standard Console with irrigation
05.001.002 Basic Console
05.001.012 Hand Switch
05.001.016 Foot Switch, 1 pedal05.001.017 Foot Switch, 2 pedals 05.001.022 Cable Foot Switch, to console 05.001.026 Cable Foot Switch, 2 m, to foot switch
Electric Pen Drive Accessories
Illustrations not actual size
11/11
2-7SynthesPow
erEquipm
entElectric Pen Drive
Electric Pen Drive— continued
Screw Attachments05.001.028 Screw Attachment, AO coupling 05.001.029 Screw Attachment, hex coupling 05.001.034 Screw Attachment, mini quick coupling
Drill Attachments05.001.030 Drill Attachment, mini quick coupling 05.001.031 Drill Attachment, J-Latch coupling05.001.032 Drill Attachment, AO coupling 05.001.110 Drill Attachment, hexagonal 05.001.033 45° Oscillating Drill Attachment, mini quick coupling
05.001.035 90° Drill Attachment, short, mini quick coupling 05.001.036 90° Drill Attachment, long, mini quick coupling
05.001.037 K-Wire Attachment
05.001.020 Cable Electric Pen Drive, 2 m, to console 05.001.021 Cable Electric Pen Drive, 4 m, to console 05.001.025 Cable Electric Pen Drive, 3 m, to console 05.001.027 Seal Nipple for cables
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-8Sy
nthe
sPo
wer
Equi
pmen
t
05.001.038 Oscillating Saw Attachment
05.001.039 Sagittal Saw Attachment 05.001.183 In-line Sagittal Saw Attachment
05.001.040 Reciprocating Saw Attachment
Electric Pen Drive
Electric Pen Drive Accessories— continued
45° Drilling Attachments05.001.042 mini quick coupling 05.001.043 J-latch coupling05.001.044 AO coupling
05.001.120 Jacobs Chuck, cannulated
Burr Attachments05.001.045 short 05.001.046 medium 05.001.047 long 05.001.048 short, angled 05.001.049 medium, angled 05.001.050 long, angled 05.001.055 extra-extra long, angled 05.001.063 extra long, angled
05.001.123 Drill/Burr Attachment, for 2.35 mm shafts, for Pen Drive
Illustrations not actual size
11/11
2-9SynthesPow
erEquipm
entElectric Pen Drive
Electric Pen Drive Accessories— continued
Irrigation Nozzles05.001.066 short 05.001.067 medium 05.001.068 long 05.001.065 for Extra Long Burring Attachment (05.001.063)05.001.122 for Extra-Extra Long Burring Attachment (05.001.055)05.001.070 for Sagittal Saw Attachment (05.001.039)05.001.071 for Reciprocating Saw Attachment (05.001.040)05.001.185 for In-Line Sagittal Saw Attachment (05.001.183)05.001.111 for Hexagonal Drilling Attachment (05.001.110)
05.001.069.01S Irrigation Tubing Set, single pack
05.001.103 Adaptor for Intra-Coupling
05.001.177 Perforator with Hudson Coupling, for Pen Drive
05.001.108 Light Adapter for Small Battery Drive, for Electric Pen Drive
Torque Calibration Units05.001.060 0.4 Nm Torque Calibration Unit 05.001.061 0.8 Nm Torque Calibration Unit
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-10Sy
nthe
sPo
wer
Equi
pmen
tElectric Pen Drive
Electric Pen Drive Accessories— continued
05.001.074 Handhold for Tool Change for Attachments
05.001.075 Cleaning Brush for Wire Driver 05.001.095 Oil Dispenser with Synthes oil, 50 ml
05.001.098 Maintenance Spray 05.001.099 Maintenance Station05.001.094 Refill Kit for Electric Pen Drive Maintenance Station 05.001.101 Adaptor for Maintenance Spray for Drive Unit 05.001.102 Adaptor for Maintenance Spray for EPD Attachments 05.001.064 Adaptor, for Maintenance Unit for XL and XXL attachment
05.001.104 Pneumatic Connection, DISS coupling for 05.001.099 05.001.105 Pneumatic Connection, Schrader coupling for 05.001.099
05.001.121 Guide for K-wires for Electric Pen Drive, for oscillating saw attachment
05.001.100 Cart for Electric Pen Drive
05.001.099
05.001.098
05.001.074
05.001.101
Illustrations not actual size
2-11SynthesPow
erEquipm
ent
11/11
Small Battery Drive Sets105.955 Small Battery Drive Set105.954 Small Battery Drive Set, with 14.4 V Battery Pack
60.550.010 Base Assembly for Small Battery Drive Graphic Case60.550.011 Lid for Small Battery Drive Graphic Case60.550.012 Attachment Rack for Small Battery Drive Graphic Case60.550.013 Insert Tray for 12V Battery Casings60.550.014 Insert Tray for 14.4V Battery Casings (in set 105.954)60.550.016 Insert Tray for SBD Handpiece and Radiolucent Drive
Instruments in both sets05.001.204 Universal Battery Charger II05.001.250 AO/ASIF Quick Coupling for Drill Bits05.001.253 Large Chuck with Key, Drilling Speed532.002 Small Battery Drive Battery Casing, for 12V Battery, 2 ea.532.003 Small Battery Drive 12V Battery, 2 ea.532.004 Battery Insertion Shield, for Small Battery Drive, 2 ea.532.010 Small Battery Drive532.011 Mini Quick Coupling, for Small Battery Drive532.012 Stryker J-Latch Coupling, for Small Battery Drive532.015 Large Quick Coupling, for Small Battery Drive532.021 Sagittal Saw Attachment532.022 Quick Coupling for K-Wires, for Small Battery Drive
Additional instruments in set 105.954532.017 AO Reduction Drive Unit532.031 Adaptor for Radiolucent Drive532.032 Small Battery Drive Battery Casing, for 14.4V Battery, 2 ea.532.033 Small Battery Drive 14.4V Battery, 2 ea.
Also available: AO Screw Attachment (05.001.251) Small Chuck with Key, Drilling Speed (05.001.252) Large Chuck with Key, Reaming Speed (05.001.254)
Synthes Power
Equipment
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-12Sy
nthe
sPo
wer
Equi
pmen
tSmall Battery Drive
Small Battery Drive
532.011 Mini Quick Coupling532.012 Stryker J-Latch Coupling
532.010 Small Battery Drive Includes Cleaning Brush (519.40) and Autoclavable Oil (519.97)
Small Battery Drive Accessories
532.003 532.033
532.004532.004 Battery Insertion Shield
532.002 Battery Casing For 12 V Battery
532.003 12 V Battery For Small Battery Drive (530.010) Voltage: 12 VDC Capacity: 0.5 Amp hour Type: NiCd
532.033 14.4 V Battery For Small Battery Drive (530.010) Voltage: 14.4 VDC Capacity: 0.5 Amp hour Type: NiCd
532.032 Battery Casing For 14.4 V Battery
532.002 532.032
Illustrations not actual size
11/11
2-13SynthesPow
erEquipm
entSmall Battery Drive
Small Battery Drive Accessories— continued
05.001.250 Quick Coupling for drill bits Cannulation: 2.1 mm
05.001.253 Large Chuck with key Cannulation: 3.3 mm Accepts round and triangular shafts up to 7.3 mm
532.015 Large Quick Coupling Cannulation: 3.2 mm
05.001.252 Small Chuck with key Cannulation: 3.3 mm Accepts round and triangular shafts up to 7.3 mm
05.001.251 AO Screw Attachment
05.001.254 Large Chuck with Key, Reaming Speed
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-14Sy
nthe
sPo
wer
Equi
pmen
tSmall Battery Drive
Small Battery Drive Accessories— continued
532.017 AO Reduction Drive Unit Cannulation: 3.2 mm
532.018 Hudson Reduction Drive Unit Cannulation: 3.2 mm
532.019 Trinkle Reduction Drive Unit Cannulation: 3.2 mm
532.020 Modified Trinkle Reduction Drive UnitCannulation: 3.2 mm
532.021 Sagittal Saw Attachment
532.022 Quick Coupling for Kirschner Wires Cannulation: 3.2 mm (fully open)
Illustrations not actual size
11/11
2-15SynthesPow
erEquipm
entSmall Battery Drive
Small Battery Drive Accessories— continued
532.026 Oscillating Saw Attachment, large, for Small Battery Drive
532.027 Replacement Key, for Saw Attachment (532.026)
532.031 Adaptor for Radiolucent Drive
532.023 Oscillating Saw Attachment II, for Small Battery Drive
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-16Sy
nthe
sPo
wer
Equi
pmen
t
01.550.001 Trauma Recon System Set
60.550.140 Graphic Case, Nylon, for Trauma Recon System Instruments05.001.201 Trauma Recon System Handpiece, 2 ea.05.001.202 Power Module, 2 ea.05.001.203 Insertion Shield, 2 ea.05.001.204 Universal Battery Charger II05.001.205 AO Quick Coupling for Drill Bits05.001.206 Chuck with Key, Drill Speed05.001.207 Chuck with Key, Ream Speed05.001.208 Chuck, Keyless, Drill Speed05.001.210 AO Reaming Attachment05.001.212 Quick Coupling for Kirschner Wires05.001.213 Large Quick Coupling for Drill Bits05.001.214 AO Screw Attachment05.001.217 Hudson Drilling Attachment05.001.218 Hudson Reaming Attachment05.001.219 Trinkle Drilling Attachment05.001.220 Trinkle Reaming Attachment05.001.221 Modified Trinkle Drilling Attachment05.001.222 Modified Trinkle Reaming Attachment05.001.224 Sagittal Saw Attachment, long05.001.225 Reciprocating Saw Attachment05.001.226 Adaptor for Radiolucent Drive05.001.227 Lid for Handpiece, 2 ea.
Trauma Recon System Set
Please refer to all TRS sections for additional instruments.
Illustrations not actual size
11/11
2-17SynthesPow
erEquipm
ent
05.001.201 Trauma Recon System Handpiece05.001.227 Lid for Handpiece
05.001.202 Power Module
05.001.203 Insertion Shield
05.001.205 AO Quick CouplingCannulation: 2.1 mm
05.001.206 Chuck with Key, Drill SpeedCannulation: 4.1 mmAccepts round and triangular shafts: up to 7.3 mmIncludes Key (510.191)
05.001.208 Chuck, Keyless, Drill SpeedCannulation: 4.1 mmAccepts round and triangular shafts: up to 6.5 mm
Trauma Recon System
Trauma Recon System
Drilling Speed Attachments
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-18Sy
nthe
sPo
wer
Equi
pmen
tTrauma Recon System
Drilling Speed Attachments— continued
05.001.212 Quick Coupling for Kirschner WiresCannulation: 4.0 mm (fully open)To insert/remove Kirschner wires and guide pins,1.0 mm-4.0 mm diameter (any length)
05.001.217 Hudson Drilling AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with Hudson fitting
05.001.219 Trinkle Drilling AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with Trinkle fitting
05.001.221 Modified Trinkle Drilling AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with modified Trinkle fitting
Illustrations not actual size
11/11
2-19SynthesPow
erEquipm
entTrauma Recon System
Reaming Speed Attachments
05.001.207 Chuck with Key, Ream SpeedCannulation: 4.1 mmAccepts round and triangular shafts: up to 7.3 mmIncludes Key (510.191)
05.001.210 AO Reaming AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with AO reaming fitting
05.001.213 Large Quick Coupling for Drill BitsMax speed: 670 rpmMax torque: 6.5 NmCannulation: 4.1 mmAccepts cutting tools and instruments with large quick coupling fitting (includes RIA, DHS/DCS Triple Reamers)
05.001.218 Hudson Reaming AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with Hudson fitting
05.001.220 Trinkle Reaming AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with Trinkle fitting
05.001.222 Modified Trinkle Reaming AttachmentCannulation: 4.1 mmAccepts cutting tools and instruments with modified Trinkle fitting
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-20Sy
nthe
sPo
wer
Equi
pmen
tTrauma Recon System
Accessories
05.001.214 AO Screw AttachmentCannulation: 2.1 mmInserts screws at a maximum speed of 330 rpm
05.001.215 Torque Limiting Attachment, 1.5 Nm05.001.216 Torque Limiting Attachment, 4.0 Nm
05.001.224 Sagittal Saw Attachment, long, with keyFrequency: 11,000 oscillations per minute in “Saw” modeDeflection: 4.5° (2.25° each side)Includes key (05.001.229)
05.001.225 Reciprocating Saw AttachmentFrequency: 11,000 oscillations per minute in “Saw” modeStroke: 4 mm
05.001.226 Adaptor for Radiolucent Drive
Illustrations not actual size
2-21SynthesPow
erEquipm
entBattery Power Line Sets
150.119 Battery Power Line Set
690.570 Graphic Case, for Battery Power Line Instruments05.001.204 Universal Battery Charger II530.605 Battery Reamer/Drill530.610 Battery Oscillator530.615 Battery Reciprocator530.620 Battery, 3 ea.530.650 Battery Insertion Shield, 3 ea.530.680 Battery Casing, 3 ea.530.730 Chuck with Key530.731 Chuck, Keyless530.741 Adaptor for Radiolucent Drive530.750 Quick Coupling for Drill Bits530.760 Large Quick Coupling530.780 AO ASIF Reaming Attachment530.782 Hudson Reaming Attachment530.783 Modified Trinkle Reaming Attachment530.784 Trinkle Reaming Attachment530.790 Quick Coupling for K-wires530.792 Hudson Drilling Attachment530.793 Modified Trinkle Drilling Attachment530.794 Trinkle Drilling Attachment
11/11
Synthes Power
Equipment
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-22Sy
nthe
sPo
wer
Equi
pmen
tBattery Power Line Sets
150.119TR Battery Power Line Set—Trauma
690.570 Graphic Case, for Battery Power Line Instruments05.001.204 Universal Battery Charger II530.605 Battery Reamer/Drill530.610 Battery Oscillator530.620 Battery, 2 ea.530.650 Battery Insertion Shield, 2 ea.530.680 Battery Casing, 2 ea.530.730 Chuck with Key530.741 Adaptor for Radiolucent Drive530.750 Quick Coupling for Drill Bits530.760 Large Quick Coupling530.780 AO ASIF Reaming Attachment530.790 Quick Coupling for K-wires
150.119JR Battery Power Line Set—Joint Replacement
690.570 Graphic Case, for Battery Power Line Instruments05.001.204 Universal Battery Charger II530.605 Battery Reamer/Drill530.610 Battery Oscillator530.615 Battery Reciprocator530.620 Battery, 3 ea.530.650 Battery Insertion Shield, 3 ea.530.680 Battery Casing, 3 ea.530.730 Chuck with Key530.782 Hudson Reaming Attachment530.783 Modified Trinkle Reaming Attachment530.792 Hudson Drilling Attachment530.793 Modified Trinkle Drilling Attachment
Also Available: Chuck, 340 rpm (530.732) Large Modified Trinkle Reaming Attachment (530.795)Battery Casing with Lock (530.681)Graphic Case for Battery Reciprocator (690.575)
Illustrations not actual size
11/11
2-23SynthesPow
erEquipm
entBattery Power Line
Battery Power Line
530.605 Battery Reamer/Drill
530.610 Battery Oscillator
530.615 Battery Reciprocator
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-24Sy
nthe
sPo
wer
Equi
pmen
tBattery Power Line
Battery Power Line Accessories
530.620 Battery Voltage: 14.4 VDC Capacity: 2.0 Amp hours Type: Ni MH
530.650 Battery Insertion Shield
530.680 Battery Casing
530.681 Battery Casing with Lock
Do not sterilize batteries
530.730 Chuck with Key, 930 rpm (drilling speed) Cannulation: 3.2 mm530.732 Chuck with Key, 340 rpm (reaming speed) Cannulation: 4.0 mm
Accepts round and triangular shafts up to 7.3 mm Includes: key (510.191)
530.731 Chuck, Keyless Cannulation: 3.2 mm Accept round and triangular shafts up to 7.3 mm
530.741 Adaptor for Radiolucent Drive
530.750 Quick Coupling for Drill Bits Cannulation: 2.0 mm
530.730
530.620
530.650
530.681530.680
Illustrations not actual size
11/11
2-25SynthesPow
erEquipm
entBattery Power Line
Battery Power Line Accessories— continued
530.760 Large Quick Coupling Cannulation: 3.2 mm
530.780 AO/ASIF Reaming Attachment Cannulation: 4.0 mm
530.782 Hudson Reaming Attachment Cannulation: 4.0 mm
530.792 Hudson Drilling Attachment Cannulation: 3.2 mm
530.783 Modified Trinkle Reaming Attachment Cannulation: 4.0 mm
530.795 Large Modified Trinkle Reaming Attachment Cannulation: 4.0 mm
530.793 Modified Trinkle Drilling Attachment Cannulation: 3.2 mm
530.784 Trinkle Reaming Attachment Cannulation: 4.0 mm
530.794 Trinkle Drilling Attachment Cannulation: 3.2 mm
530.782 530.792
530.783 530.793
530.784 530.794
530.790 Quick Coupling for K-wires Cannulation: 4.0 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-26Sy
nthe
sPo
wer
Equi
pmen
tComPact Air Drive II Set
150.16 ComPact Air Drive II Set
60.550.030 Graphic Case Base Assembly, for ComPact Air Drive II Set 60.550.031 Lid, for ComPact Air Drive II Set Graphic Case 60.550.032 Attachment Rack, for ComPact Air Drive II 60.550.033 Insert Tray, for ComPact Air Drive II
Instruments511.701 ComPact Air Drive II511.73 Chuck with key511.75 Quick Coupling for drill bits511.761 Large Quick Coupling511.785 Reduction Drive Unit511.791 Quick Coupling for K-wires519.51S Double Air Hose, 3 meter length, with Schrader stem
Also available: Double Air Hose, 3 meter length, with AO stem (519.51)
Illustrations not actual size
2-27SynthesPow
erEquipm
ent
11/11
Compact Air Drive II
Accessories
511.785 Reduction Drive Unit511.786 Reduction Drive Unit with Reverse
For intramedullary and acetabular reaming Cannulation: 3.2 mm
511.80 Oscillating Saw Attachment Includes key (518.09)
511.785
511.801 Oscillating Saw Attachment II
511.902 Reciprocating Saw Attachment
511.701 ComPact Air Drive II Includes Cleaning Brush (519.40) and Autoclavable Oil (519.97)
ComPact Air Drive IISynthes Pow
erEquipm
ent
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-28Sy
nthe
sPo
wer
Equi
pmen
tComPact Air Drive II
Accessories— continued
511.73 Chuck with key Accepts round and triangular shafts up to 7.3 mm Cannulation: 3.2 mm Includes key (510.191)
511.761 Large Quick Coupling Accepts DHS and DCS Triple Reamers Accepts large quick-coupling drill bits Cannulation: 3.2 mm
511.75 Quick Coupling for drill bits Allows use of Oscillating Drill Attachment and Radiolucent Drive Cannulation: 2.0 mm
511.731 Chuck, keyless Accepts round and triangular shafts up to 7.3 mm
511.784 Trinkle Adaptor
Adaptors for Reduction Drive Unit (511.785 and 511.786) Accept competitive intramedullary and acetabular reamers
511.783 Modified Trinkle Adaptor
511.782 Hudson Adaptor
Illustrations not actual size
2-29SynthesPow
erEquipm
ent
11/11
ComPact Air Drive II
Accessories— continued
511.791 Quick Coupling for K-wires For insertion of K-wires from 0.6 mm to 3.2 mm in diameter Cannulation: 3.2 mm
511.770 Torque Limiting Attachment, 1.5 Nm
511.771 Torque Limiting Attachment, 4 Nm
Synthes Power
Equipment
518.01 Oscillating Bone Saw, with double hose connector518.09 Replacement Chuck Key for Oscillating Bone Saw
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-30Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Universal Battery Charger II and Batteries
530.200 Battery For Power Drive (530.100) Voltage: 12 VDC Capacity: 1.0 Amp hours Type: NiCd
To be charged with UBC Charger (530.601)
530.200
05.001.204 Universal Battery Charger II05.001.140 Medical Grade Power Cord, three prongs, clear plug
Do Not Sterilize Batteries or Battery Charger
530.280 Battery Casing
530.250 Battery Insertion Shield
530.250 530.280
530.620 Battery Voltage: 14.4 VDC Capacity: 2.0 Amp hours Type: Ni MH
530.650 Battery Insertion Shield
530.680 Battery Casing
530.681 Battery Casing with Lock
Do not sterilize batteries
530.620
530.650
530.681530.680
Illustrations not actual size
11/11
2-31SynthesPow
erEquipm
entPower Equipment Accessories
Universal Battery Charger II and Batteries— continued
05.001.202 Power ModuleFor Trauma Recon SystemVoltage: 25.2 VCapacity: 1.2 Amp hoursType: Li-Ion
05.001.203 Insertion Shield05.001.227 Lid for Handpiece
532.003 532.033
532.004532.004 Battery Insertion Shield
532.002 Battery Casing For 12 V Battery
532.003 12 V Battery For Small Battery Drive (530.010) Voltage: 12 VDC Capacity: 0.5 Amp hour Type: NiCd
532.033 14.4 V Battery For Small Battery Drive (530.010) Voltage: 14.4 VDC Capacity: 0.5 Amp hour Type: NiCd
532.032 Battery Casing For 14.4 V Battery
532.002 532.032
05.001.203
05.001.227
05.001.202
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-32Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Attachments and Accessories
510.191 Replacement Key for Large Chucks
510.20 Right Angle DriveFor use with Trauma Recon System Attachment (05.001.210), or ComPact Air Drive II Attachments (511.785 or 511.786)
511.20 Oscillating Drill Attachment For use with ComPact Air Drive II with Quick Coupling for drill bits (511.75)
511.30 Radiolucent Drive For use with ComPact Air Drive II with Quick Coupling for drill bits (511.75); or Small Battery Drive with Quick Coupling for drill bits (05.001.250) and Adaptor (532.031); or Battery Power Line, with Adaptor (530.741); or Trauma Recon System,
with Adaptor (05.001.226)
Three-Fluted Drill Bits for Radiolucent Drive, 14 mm flute length, quick coupling
Diameter Length 511.411 2.0 mm 150 mm
Brad Point511.412 2.5 mm 150 mm511.413 2.7 mm 150 mm511.431 3.2 mm 105 mm511.414 3.2 mm 150 mm511.415 3.5 mm 150 mm511.416 3.6 mm 150 mm511.432 4.0 mm 105 mm511.417 4.0 mm 150 mm511.418 4.5 mm 150 mm
Three-Fluted Drill Bits, for Radiolucent Drive�
quick coupling, needle point, 145 mm03.010.100 3.2 mm03.010.101 4.2 mm03.010.102 5.0 mm
�Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
11/11
2-33SynthesPow
erEquipm
entPower Equipment Accessories
Attachments and Accessories— continued
Torque Limiting Attachments
511.777 0.4 Nm, quick coupling511.776 0.8 Nm, quick coupling511.770 1.5 Nm, for ComPact Air Drive II511.773 1.5 Nm, quick coupling05.001.215 1.5 Nm, for Trauma Recon System 511.771 4 Nm, for ComPact Air Drive II511.774 4 Nm, for AO Reaming Coupler05.001.216 4.0 Nm, for Trauma Recon System
519.40 Cleaning Brush, 3.6 mm diameter, 187 mm lengthFor Small Battery Drive and ComPact Air Drive II Systems
516.101 Cleaning Brush, 4.7 mm diameter, 322 mm lengthFor Battery Power Line and Trauma Recon Systems
511.904 Sternum Top For use with Reciprocating Saw Attachments (511.902 and 05.001.225) and Reciprocating Saw Blade (511.915S)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-34Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Chucks and Replacement Keys
310.90 Mini Quick Coupling Chuck For use with Small Air Drill (511.10 or 511.11) and Quick Coupling for drill bits
310.93 Small Chuck with Key For use with Small Air Drill (511.10 or 511.11) and Quick Coupling for drill bits Also used with Handle (311.43) or T-Handle (311.44) Accepts round shafts to 4.0 mm in diameter with Chuck shafts to 4.5 mm in diameter
310.93K Replacement Key For Small Chuck (310.93)
338.49 Large Quick Coupling Chuck For use with Small Air Drill (511.10 or 511.11) and Quick Coupling for drill bits Accommodates the DHS/DCS Triple Reamers and large cannulated drill bits
351.16J Flexible Shaft Connector, for chuck, cannulated
Illustrations not actual size
11/11
2-35SynthesPow
erEquipm
entPower Equipment Accessories
Double Air Hoses
All double air hoses are autoclavable; do not connect both ends when autoclaving.
Synthes Stem Hoses connect to each other and to machines with a double hose connector
519.50 2 meters length519.51 3 meters519.53 5 meters
Synthes Stem
Schrader Stem
Schrader Stem
Connect to machines with a double hose connector for use with a Schrader system
519.50S 2 meters length519.51S 3 meters519.53S 5 meters
DISS hand-tight nut
DISS Fitting
Connect to machines with a double hose connector for use with a DISS system 519.50D 2 meters length519.51D 3 meters519.53D 5 meters
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-36Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Accessories
519.97 Autoclavable Oil Dispenser with autoclavable oil which does not harden during sterilization Not to be used with Pen Drive systems.
Use Autoclavable Oil for Pen Drive Systems (05.001.095)
05.001.095 Autoclavable Oil for Pen Drive Systems
Regulators 520.89 Nitrogen Regulator Complete with couplers
For use with all Synthes air equipment Regulator will accept both Synthes (quick- connect) and Schrader hose connectors. Input is standard C.G.A. nitrogen tank fitting.
520.89R Nitrogen Regulator Regulator with Synthes fitting only
520.89Y “Y” Fitting To adapt nitrogen regulators to accept both Synthes and Schrader hose fittings
519.97 05.001.095
Illustrations not actual size
11/11
2-37SynthesPow
erEquipm
entPower Equipment Accessories
Saw Blades for Oscillating Saws
Saw Blades, calibrated, sterile
Cutting Width Length Thickness519.230S 6 mm 25 mm 0.6 mm519.103S 10 mm 25 mm 0.6 mm 519.250S 14 mm 25 mm 0.6 mm519.104S 10 mm 50 mm 0.6 mm 519.150S 14 mm 50 mm 0.6 mm 519.105S 20 mm 50 mm 0.6 mm 519.100S 27 mm 50 mm 0.6 mm 519.113S 18 mm 70 mm 1.2 mm519.106S 19 mm 70 mm 1.0 mm519.170S 27 mm 70 mm 0.8 mm 519.200S 27 mm 70 mm 1.0 mm 519.210S 27 mm 70 mm 1.2 mm519.190S 50 mm 70 mm 0.8 mm
519.100S 519.103S 519.104S
519.105S 519.106S 519.113S
519.150S 519.170S
519.190S
519.200S 519.210S 519.230S
519.250S
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-38Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Saw Blades for Oscillating Saws— continued
Saw Blades, calibrated, self-centering, sterile
Calibrated Cutting Width Length Thickness05.002.201S 12.5 mm 90 mm 0.89 mm519.118S 12.5 90 0.9005.002.405S 12.5 90 1.00 05.002.202S 12.5 90 1.1905.002.203S 12.5 90 1.2705.002.204S 12.5 90 1.3705.002.205S 12.5 90 1.47
519.118S
05.002.006S 19 mm 80 mm 0.89 mm 05.002.001S 19 95 0.89 519.107S 19 95 0.9005.002.007S 19 95 1.00 05.002.008S 19 95 1.07 05.002.002S 19 95 1.19519.114S 19 95 1.2505.002.003S 19 95 1.2705.002.004S 19 95 1.37519.116S 19 95 1.4005.002.005S 19 95 1.47
05.002.001S
05.002.301S 19-12.5 mm* 90 mm 0.89 mm05.002.306S 19–12.5 90 1.00 05.002.302S 19-12.5 90 1.1905.002.303S 19-12.5 90 1.2705.002.304S 19-12.5 90 1.3705.002.305S 19-12.5 90 1.47
519.109S
05.002.302S
05.002.501S 25 mm 60 mm 0.89 mm519.109S 25 60 0.90
05.002.101S 25 mm 95 mm 0.89 mm519.108S 25 95 0.9005.002.106S 25 95 1.00 05.002.107S 25 95 1.07 05.002.102S 25 95 1.19519.115S 25 95 1.2505.002.103S 25 95 1.2705.002.104S 25 95 1.37519.117S 25 95 1.4005.002.105S 25 95 1.4705.002.401S 25 85 1.47
* Cutting width-shaft width
05.002.101S
05.002.401S
Illustrations not actual size
11/11
2-39SynthesPow
erEquipm
entPower Equipment Accessories
Saw Blades for Oscillating Saws— continued
Saw Blades for joint replacement, calibrated, aggressive cut, sterile
Calibrated Cutting Width Length Thickness05.003.100S 12.5 mm 90 mm 0.89 mm05.003.102S 12.5 90 1.00 05.003.103S 12.5 90 1.07 05.003.104S 12.5 90 1.19 05.003.106S 12.5 90 1.27 05.003.107S 12.5 90 1.37 05.003.109S 12.5 90 1.47 05.003.110S 19 mm 90 mm 0.89 mm05.003.112S 19 90 1.00 05.003.113S 19 90 1.07 05.003.114S 19 90 1.19 05.003.116S 19 90 1.27 05.003.117S 19 90 1.37 05.003.119S 19 90 1.47 05.003.120S 19–12.5 mm 90 mm 0.89 mm05.003.122S 19–12.5 90 1.00 05.003.123S 19–12.5 90 1.07 05.003.124S 19–12.5 90 1.19 05.003.126S 19–12.5 90 1.27 05.003.127S 19–12.5 90 1.37 05.003.129S 19–12.5 90 1.47 05.003.130S 25 mm 90 mm 0.89 mm05.003.132S 25 90 1.00 05.003.133S 25 90 1.07 05.003.134S 25 90 1.19 05.003.136S 25 90 1.27 05.003.137S 25 90 1.37 05.003.139S 25 90 1.47
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-40Sy
nthe
sPo
wer
Equi
pmen
t
Saw Blades, sterile, for Large Reciprocating Saw Attachments
Cutting Cutting Length Thickness511.915S 40 mm 1.1 mm
511.914S 68 mm 0.80 mm (double-sided)511.913S 68 1.00 (double-sided) 511.912S 68 1.10 (double sided)
511.907S 55 mm 1.05 mm511.909S 55 0.85
511.905S 80 mm 1.05 mm
511.906S 70 mm 1.27 mm
Power Equipment Accessories
Saw Blades
Saw Blades for Small Battery Drive
532.067S
532.048S
532.044S
Saw Blades, sterile, for Small Battery Drive
Calibrated Cutting Width Length Thickness532.041S 6 mm 10 mm 0.4 mm532.042S 10 10 0.4 532.043S 16 10 0.4 532.044S 4 15 0.4 532.045S 8 20 0.4 532.046S 12 20 0.4 532.047S 6 30 0.4 532.048S 10 30 0.4
532.061S 6 mm 25 mm 0.6 mm532.062S 10 25 0.6 532.063S 14 25 0.6 532.064S 10 50 0.6 532.065S 14 50 0.6 532.066S 20 50 0.6 532.067S 27 50 0.6
Illustrations not actual size
11/11
2-41Pow
erEquipm
entPower Equipment Accessories
Parallel Saw Blades for Small Battery Drive
Parallel Saw Blades90° parallel cut
532.081S 2.0 mm shortening532.082S 2.5 mm shortening532.083S 3.0 mm shortening532.084S 4.0 mm shortening532.085S 5.0 mm shortening
45° parallel cut532.091S 2.0 mm shortening532.092S 2.5 mm shortening532.093S 3.0 mm shortening532.094S 4.0 mm shortening532.095S 5.0 mm shortening
532.081S 532.082S 532.083S
532.084S 532.085S 532.091S
532.092S 532.093S 532.094S
532.095S
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-42Sy
nthe
sPo
wer
Equi
pmen
tPower Equipment Accessories
Saw Blades
Saw Blades, for Pen Drive Reciprocating Saw (05.001.040), sterile03.000.320S 13 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid03.000.321S 20 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid03.000.327S 27 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid03.000.334S 20 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid, long03.000.335S 27 mm x 6.4 mm/2.9 mm x 0.6 mm, trapezoid, long 03.000.322S 7.0 mm x 4.0 mm x 0.6 mm03.000.324S 14.5 mm x 4.0 mm x 0.6 mm 03.000.325S 25 mm x 5.5 mm x 0.6 mm, for rhinoplasty 03.000.323S 14 mm x 6.4 mm x 0.6 mm03.000.326S 27 mm x 6.4 mm x 0.6 mm03.000.328S 33.5 mm x 6.4 mm x 0.6 mm 03.000.329S 34.5 mm x 5.0 mm/2.5 mm x 0.6 mm, crescent-shaped, ascending 03.000.330S 33.5 mm x 6.4 mm x 0.6 mm, with offset downwards03.000.331S 33.5 mm x 6.4 mm x 0.6 mm, with offset to the right03.000.332S 33.5 mm x 6.4 mm x 0.6 mm, with offset to the left 03.000.336S 13 x 3 x 0.4 mm, thin03.000.337S 20 x 3 x 0.4 mm, thin 03.000.338S 9.2 x 7.3 x 0.6 mm, left, Intrabuccal Osteotomy 03.000.339S 9.2 x 7.3 x 0.6 mm, right, Intrabuccal Osteotomy
Saw Blades, for Pen Drive Sagittal Saw (05.001.039), sterile03.000.314S 18 mm x 2.5 mm x 0.38 mm 03.000.300S 18 mm x 4.0 mm x 0.38 mm 03.000.301S 15 mm x 6.0 mm x 0.38 mm 03.000.302S 31 mm x 6.0 mm x 0.38 mm 03.000.303S 22 mm x 8.0 mm x 0.38 mm 03.000.304S 15 mm x 10 mm x 0.38 mm 03.000.305S 31 mm x 10 mm x 0.38 mm 03.000.306S 22 mm x 12 mm x 0.38 mm 03.000.307S 15 mm x 16 mm x 0.38 mm 03.000.317 22 mm x 8.0 mm x 0.4 mm (nonsterile only) 03.000.308S 27 mm x 6.0 mm x 0.6 mm 03.000.309S 27 mm x 10 mm x 0.6 mm 03.000.310S 27 mm x 14 mm x 0.6 mm 03.000.315S 43 mm x 20 mm x 0.6 mm
Saw Blades, crescentic, for Pen Drive Oscillating Saw (05.001.038) and Small Battery Drive Oscillating Saw (532.023), sterile
03.000.311S 26.5 mm x 13.3 mm x 0.6 mm 03.000.312S 25 mm x 16.3 mm x 0.6 mm 03.000.313S 30 mm x 17.9 mm x 0.6 mm 03.000.316S 30 mm x 21.9 mm x 0.6 mm
03.000.314S
03.000.302S
03.000.308S
03.000.321S
03.000.329S
03.000.334S
03.000.338S
Illustrations not actual size
11/11
2-43SynthesPow
erEquipm
entPower Equipment Accessories
Saw Blades— continued
Saw Blades for Small Battery Drive
Saw Blades, 105° angled, 70 mm shaft, sterilefor Pen Drive Oscillating Saw (05.001.038) and Small BatteryDrive Oscillating Saw (532.023)
03.000.340S 7.0 mm x 12 mm x 0.4 mm 03.000.343S 12.0 mm x 4.5 mm x 0.4 mm03.000.342S 12.0 mm x 9.5 mm x 0.4 mm 03.000.341S 12.0 mm x 11.5 mm x 0.4 mm
Crescentic Saw Blades, for Small Battery Drive Large Oscillating Saw Attachment (532.026)
Radius Depth Thickness03.000.390 12 mm 45 mm 0.6 mm 03.000.391 15 45 0.6 03.000.392 18 45 0.6 03.000.393 21 45 0.6 03.000.394 24 45 0.6 03.000.395 27 50 0.603.000.396 30 50 0.6
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-44Sy
nthe
sPo
wer
Equi
pmen
tCutting Tools for Electric Pen Drive and Air Pen Drive
Burrs
Round Burrs, sterile Diameter03.000.000S S 1.0 mm03.000.001S M 1.0 03.000.002S L 1.0
03.000.003S S 1.5 03.000.004S M 1.5 03.000.005S L 1.5
03.000.230S S 2.0 03.000.231S M 2.0 03.000.232S L 2.0
03.000.006S S 2.5 03.000.007S M 2.5 03.000.008S L 2.5
03.000.009S S 3.0 03.000.010S M 3.0 03.000.011S L 3.0
Diameter03.000.012S S 4.0 mm 03.000.013S M 4.0 03.000.014S L 4.0
03.000.015S S 5.0 03.000.016S M 5.0 03.000.017S L 5.0
03.000.018S S 6.5 03.000.019S M 6.5 03.000.020S L 6.5
03.000.021S S 8.0 03.000.022S M 8.0 03.000.023S L 8.0
Round Burrs, diamond-coated, sterile Diameter03.000.030S S 1.0 mm03.000.031S M 1.0 03.000.032S L 1.0
03.000.033S S 1.5 03.000.034S M 1.5 03.000.035S L 1.5
03.000.036S S 2.0 03.000.037S M 2.0 03.000.038S L 2.0
03.000.039S S 2.5 03.000.040S M 2.5 03.000.041S L 2.5
03.000.042S S 3.0 03.000.043S M 3.0 03.000.044S L 3.0
Diameter03.000.045S S 3.5 mm 03.000.046S M 3.5 03.000.047S L 3.5
03.000.048S S 4.0 03.000.049S M 4.0 03.000.050S L 4.0
03.000.051S S 5.0 03.000.052S M 5.0 03.000.053S L 5.0
03.000.054S S 6.0 03.000.055S M 6.0 03.000.056S L 6.0
Acorn-shaped Burrs, sterile Diameter Head Length03.000.233S S 5.0 mm 6.7 mm03.000.234S M 5.0 6.7 03.000.235S L 5.0 6.7 03.000.060S S 6.0 8.0 03.000.061S M 6.0 8.0 03.000.062S L 6.0 8.0 03.000.063S S 7.5 9.5 03.000.064S M 7.5 9.5 03.000.065S L 7.5 9.5 03.000.066S S 9.0 11.4 03.000.067S M 9.0 11.4 03.000.068S L 9.0 11.4
Illustrations not actual size
11/11
2-45SynthesPow
erEquipm
entCutting Tools for Electric Pen Drive and Air Pen Drive
Burrs— continued
Egg-shaped Burrs, sterile Diameter Head Length03.000.070S S 4.0 mm 8.0 mm03.000.071S M 4.0 8.0 03.000.072S L 4.0 8.0 03.000.073S S 5.5 10 03.000.074S M 5.5 10 03.000.075S L 5.5 10
Pear-shaped Burrs, sterile Diameter Head Length03.000.236S S 4.0 mm 6.9 mm03.000.237S M 4.0 6.9 03.000.238S L 4.0 6.9 03.000.076S S 5.0 8.3 03.000.077S M 5.0 8.3 03.000.078S L 5.0 8.3 03.000.079S S 6.0 9.7 03.000.080S M 6.0 9.7 03.000.081S L 6.0 9.7
Barrel-shaped Burrs, sterile Diameter Head Length03.000.239S S 4.0 mm 9.0 mm03.000.240S M 4.0 9.0 03.000.241S L 4.0 9.0 03.000.082S S 5.0 10 03.000.083S M 5.0 10 03.000.084S L 5.0 10 03.000.242S S 6.0 11 03.000.243S M 6.0 11 03.000.244S L 6.0 11
Fissure Burrs, tapered, carbide, sterile Diameter Head Length03.000.085S S 1.6 mm 4.5 mm03.000.086S M 1.6 4.5 03.000.087S L 1.6 4.5 03.000.088S S 2.3 5.2 03.000.089S M 2.3 5.2 03.000.090S L 2.3 5.2 03.000.091S S 2.6 6.8 03.000.092S M 2.6 6.8 03.000.093S L 2.6 6.8
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-46Sy
nthe
sPo
wer
Equi
pmen
tCutting Tools for Electric Pen Drive and Air Pen Drive
Burrs— continued
Fissure Burrs, cylindrical, carbide, sterile Diameter Head Length03.000.094S S 1.6 mm 4.3 mm03.000.095S M 1.6 4.3 03.000.096S L 1.6 4.3 03.000.097S S 3.0 16 03.000.098S M 3.0 16 03.000.099S L 3.0 16
Inverted Cone Burrs, sterile Diameter Head Length03.000.100S S 6.5 mm 6.1 mm03.000.101S M 6.5 6.1 03.000.102S L 6.5 6.1
Drum-shaped Burrs, sterile Diameter Head Length03.000.245S S 4.7 mm 7.9 mm03.000.246S M 4.7 7.9 03.000.247S L 4.7 7.9 03.000.103S S 6.0 7.9 03.000.104S M 6.0 7.9 03.000.105S L 6.0 7.9 03.000.106S S 9.1 7.9 03.000.107S M 9.1 7.9 03.000.108S L 9.1 7.9
Circular Burrs, diamond-coated, sterile Diameter Head Length03.000.109S S 25.0 mm 0.7 mm03.000.110S M 25.0 0.7 03.000.111S L 25.0 0.7
Illustrations not actual size
11/11
2-47SynthesPow
erEquipm
entCutting Tools for Electric Pen Drive and Air Pen Drive
Burrs— continued
Swanson Burrs, sterile Diameter Head Length03.000.115S S 2.0 mm 6.3 mm03.000.116S M 2.0 6.3 03.000.117S L 2.0 6.3 03.000.118S S 3.0 9.7 03.000.119S M 3.0 9.7 03.000.120S L 3.0 9.7 03.000.121S S 4.0 12.7 03.000.122S M 4.0 12.7 03.000.123S L 4.0 12.7 03.000.160S S 5.0 15.8 03.000.161S M 5.0 15.8 03.000.162S L 5.0 15.8
Cranial Burrs, sterile Diameter Head Length03.000.124S S 1.8 mm 11 mm for Craniotome 05.001.05103.000.125S M 2.2 mm 16 mm for Craniotome 05.001.05203.000.126S L 3.0 mm 25 mm for Craniotome 05.001.053
Pin-shaped Burrs, sterile Diameter Head Length03.000.127S S 1.4 mm 6.0 mm03.000.128S M 1.4 6.0 03.000.129S L 1.4 6.0 03.000.130S S 2.1 12 03.000.131S M 2.1 12 03.000.132S L 2.1 12 03.000.248S S 3.0 19.5 03.000.249S M 3.0 19.5 03.000.250S L 3.0 19.5
Neuro Burrs, sterile Diameter Head Length03.000.133S S 1.7 mm 2.3 mm03.000.134S M 1.7 2.3 03.000.135S L 1.7 2.3 03.000.136S S 2.2 3.7 03.000.137S M 2.2 3.7 03.000.138S L 2.2 3.7 03.000.139S S 2.9 3.8 03.000.140S M 2.9 3.8 03.000.141S L 2.9 3.8
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-48Sy
nthe
sPo
wer
Equi
pmen
tCutting Tools for Electric Pen Drive and Air Pen Drive
Cutting Tools
Drill Bits, sterile Diameter03.000.142S S 1.0 mm03.000.143S M 1.0 03.000.144S S 1.1 03.000.145S M 1.1 03.000.146S S 1.3 03.000.147S M 1.3 03.000.148S S 1.5 03.000.149S M 1.5 03.000.150S S 2.0 03.000.151S M 2.0 03.000.152S S 2.5 03.000.153S M 2.5
Wire-Pass Drill Bits, sterile Diameter Head Length03.000.154S S 1.1 mm 5.0 mm03.000.155S M 1.1 5.0 03.000.156S S 1.5 7.0 03.000.157S M 1.5 7.0 03.000.158S S 2.0 7.0 03.000.159S M 2.0 7.0
Rasps, sterile, for Pen Drive Reciprocating Saw (05.001.040)03.000.360S small crosscut03.000.361S large crosscut03.000.362S small03.000.363S large
Broaches, sterile03.000.364S small proximal 19 mm x 4.5 mm x 4.5 mm03.000.365S small distal 16 mm x 6 mm x 6 mm
Lindemann Reamers, sterile Diameter Head Length03.000.112S S 2.3 mm 20.2 mm03.000.113S M 2.3 20.2 03.000.114S L 2.3 20.2
Illustrations not actual size
11/11
2-49SynthesPow
erEquipm
entCutting Tools for Electric Pen Drive and Air Pen Drive
Cutting Tools with mini quick and J-latch couplings
Round Burrs, sterile Diameter Head Length Coupling03.000.170S 3.0 mm 28 mm mini quick03.000.171S 3.0 45 mini quick03.000.172S 5.0 45 mini quick03.000.200S 3.0 28 J-latch03.000.201S 3.0 45 J-latch03.000.202S 5.0 45 J-latch
Egg-shaped Burrs, sterile Diameter Head Length Coupling03.000.173S 7.0 mm 28 mm mini quick03.000.174S 7.0 45 mini quick03.000.175S 8.0 28 mini quick03.000.176S 8.0 45 mini quick03.000.203S 7.0 28 J-latch03.000.204S 7.0 45 J-latch03.000.205S 8.0 28 J-latch03.000.206S 8.0 45 J-latch
Conical Burrs, sterile Diameter Head Length Coupling03.000.177S 5.0 mm 23 mm mini quick03.000.178S 5.0 28 mini quick03.000.179S 5.0 45 mini quick03.000.180S 6.0 24 mini quick03.000.181S 6.0 28 mini quick03.000.182S 6.0 45 mini quick03.000.207S 5.0 23 J-latch03.000.208S 5.0 28 J-latch03.000.209S 5.0 45 J-latch03.000.210S 6.0 24 J-latch03.000.211S 6.0 28 J-latch03.000.212S 6.0 45 J-latch
Pear-shaped Burrs, sterile Diameter Head Length Coupling03.000.183S 5.0 mm 23 mm mini quick03.000.184S 5.0 28 mini quick03.000.185S 5.0 45 mini quick03.000.186S 6.0 24 mini quick03.000.187S 6.0 28 mini quick03.000.188S 6.0 45 mini quick03.000.213S 5.0 23 J-latch03.000.214S 5.0 28 J-latch03.000.215S 5.0 45 J-latch03.000.216S 6.0 24 J-latch03.000.217S 6.0 28 J-latch03.000.218S 6.0 45 J-latch
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-50Sy
nthe
sPo
wer
Equi
pmen
tCutting Tools for Electric Pen Drive and Air Pen Drive
Cutting Tools with mini quick and J-latch couplings— continued
Fissure Burrs, tapered, sterile Diameter Head Length Coupling03.000.189S 2.1 mm 31 mm mini quick03.000.190S 2.1 45 mini quick03.000.191S 3.2 31 mini quick03.000.192S 3.2 45 mini quick03.000.219S 2.1 31 J-latch03.000.220S 2.1 45 J-latch03.000.221S 3.2 31 J-latch03.000.222S 3.2 45 J-latch
Circular Burrs, sterile Diameter Head Length Coupling03.000.193S 8.0 mm 28 mm mini quick03.000.194S 10.0 28 mini quick03.000.195S 12.0 28 mini quick03.000.196S 15.0 28 mini quick03.000.223S 8.0 28 J-latch03.000.224S 10.0 28 J-latch03.000.225S 12.0 28 J-latch03.000.226S 15.0 28 J-latch
Lindemann Reamers Diameter Head Length Coupling03.000.197S 2.3 mm 45 mm mini quick03.000.227S 2.3 45 J-latch
Illustrations not actual size
11/11
2-51SynthesPow
erEquipm
entAccessories
For Mini Compressed Air Machine
512.55 Saw Blade, 26 mm length, 0.65 mm thick For Mini Reciprocating Saw
Saw Blades for Mini Oscillating Saw, 0.25 mm thick Width Length512.77 6 mm 13 mm512.78 8 mm 13 mm512.79 8 mm 18 mm
Cutting Tools, with mini quick coupling513.01 1.1 mm Drill Bit, 28 mm513.03 1.1 mm Drill Bit, 45 mm
513.05 1.5 mm Drill Bit, 28 mm513.08 1.5 mm Drill Bit, 52 mm
513.10 2.0 mm Drill Bit, 28 mm513.13 2.0 mm Drill Bit, 52 mm513.14 2.0 mm Drill Bit, 67 mm
513.17 2.7 mm Drill Bit, 28 mm513.19 2.7 mm Drill Bit, 67 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-52Sy
nthe
sPo
wer
Equi
pmen
tGraphic Cases
Graphic Cases for Electric Pen Drive
690.580 Graphic Case for Electric Pen Drive The standard graphic case for the Electric Pen Drive set has a
removable attachment rack that houses 24 attachments. Thebottom of the graphic case houses the pen, cable and handswitch and includes an auxiliary bin.
Graphic Case Replacement Accessories690.581 Lid for Graphic Case690.582 Attachment Rack for Graphic Case690.583 Insert Tray for Graphic Case690.585 Graphic Case Base68.000.007 Support for Cutting Tools
Modular Graphic Cases for Electric Pen Drive Set The modular graphic cases for the Electric Pen Drive set are designed to meet various Electric Pen Drive set configurations in a compact case.
Graphic Cases690.586 Three Level Modular Graphic Case (includes lid)690.596 Single Level Modular Graphic Case (includes lid)690.597 Two Level Modular Graphic Case (includes lid)
Insert Trays690.587 Insert Tray for 60,000 rpm Drive Unit Auxiliary bin holds one module insert
690.588 Attachment Tray Assembly Designed to house any combination of attachments
for the Electric Pen Drive
ModulesModule inserts are available to customize insert trays to house selectedattachments. Two (2) modular compartments can be customized to fit small orlarge Electric Pen Drive attachments. The attachment tray assembly can hold up tofour (4) module inserts. Module inserts include dividers and screws for properinsertion onto tray. Divider inserts snap easily into place, and can be removed foreasy adjustment. Labels are also available to provide easy identification ofattachments within the modules.
690.578 Module Insert, 4 Compartments (includes dividers and screws)690.579 Module Insert, 2 Compartments (includes dividers and screws)
Accessories306.763 Label Sheet for Electric Pen Drive Module690.578.04 Divider Kit for Module Insert (for extra divider inserts
and screws)690.589 Lid for Modular Graphic Case
690.586
690.578 and 690.579
Illustrations not actual size
11/11
2-53Pow
erEquipm
entGraphic Cases
Graphic Cases for Battery Power Line
690.570 Graphic Case for Battery Power Line Set The attachment rack for the Battery Power line graphic case also
serves as a stand for the Battery Reamer/Drill, Battery Oscillator, and Battery Reciprocator handpieces, and can be used to facilitateinstrument insertion and removal.
690.575 Graphic Case for Battery Power Line Reciprocator The Battery Reciprocator Graphic Case houses
the Battery Reciprocator handpiece, one insertion shield and one battery casing.
Accessories690.571 Lid for Battery Power line Graphic Case 690.572 Attachment Rack for Battery Power line Graphic Case 690.573 Insert Tray for Battery Power line Graphic Case 690.574.04 Grommets for Attachment Rack for Battery Power line Graphic Case,
4-Pack
60.550.140 Graphic Case, Nylon, for Trauma Recon System60.550.141 Lid, Nylon, for Trauma Recon System Graphic Case60.550.143 Insert Tray, for Trauma Recon System Graphic Case
68.001.605 Washing Machine Basket for 2 TRS Handpieces68.001.602 Lid for Washing Machine Basket
690.575
Graphic Case for Trauma Recon System
Washing Basket for Trauma Recon System
Illustrations not actual size
Instruments and implants approved by the AO Foundation 11/11
2-54Po
wer
Equi
pmen
tGraphic Cases
Graphic Cases for Small Battery Drive
The Small Battery Drive graphic case options allow cases to be ordered for various set configurations.
The standard graphic case configuration includes base, lid, attachment rack and three insert trays. Customers can choose up to 2 insert trays from Option 1 and 1 insert tray from Option 2 to configure the case to meet their individual needs.
01.001.501 Graphic Case Set for Small Battery Drive Set (includes 60.550.010, 60.550.011, 60.550.012, 60.550.013, 60.550.014 and 60.550.016)
60.550.010 Base Assembly for Small Battery Drive Graphic Case60.550.011 Lid for Small Battery Drive Graphic Case60.550.012 Attachment Rack for Small Battery Drive Graphic Case
Choose up to 2 trays from Option 160.550.013 Insert Tray for 12 V Battery Casings60.550.014 Insert Tray for 14.4 V Battery Casings60.550.015 Insert Tray for Small Battery Drive Adaptor
for Electric Pen Drive
Choose 1 tray from Option 260.550.016 Insert Tray for Small Battery Drive Handpiece
and Radiolucent Drive60.550.017 Insert Tray for Two Small Battery Drive Handpieces
Accessories690.576.04 Grommets for Attachment Rack for
Small Battery Drive Graphic Case, 4-Pack
690.525 Small Graphic Case for Small Battery Drive Set The small graphic case for Small Battery Drive set
offers a compact, lightweight graphic case option to have a basic set including a handpiece, casings and a few attachments.
690.355 Graphic Case for Small Battery Drive
60.550.014
60.550.016
60.550.010
690.355
60.550.013
Illustrations not actual size
11/11
2-55SynthesPow
erEquipm
entCompartmental Pressure Monitoring System
150.001 Compartmental Pressure Monitoring System
306.001 Carrying Case, for Compartmental Pressure Monitoring System
Instruments530.411 Monitor530.412 Probe530.413 Extension Cable
The Anspach Effort, Inc.4500 Riverside DrivePalm Beach Gardens, FL 33410Telephone: (561) 627-1080To order: (800) 327-6887Fax: (800) 327-6661E-mail: [email protected]
Anspach Europe Ltd.Aston Court, Kingsmead Business ParkFrederick Place, High WycombeHP 11 1LA, United KingdomTelephone: +441 494 616126Fax: +441 494 616001
www.synthes.comwww.anspach.com
Manufacturer
11/11
N-1N
umerical
Index
Numerical Index
Section numbers are listed in bold.
01.001.501 2: 5401.001.594 2: 201.001.595 2: 301.001.580, .581 2: 401.550.001 2: 1603.000.000S–.068S 2: 4403.000.070S–.093S 2: 4503.000.094S–.111S 2: 4603.000.112S–.114S 2: 4803.000.115S–.141S 2: 4703.000.142S–.159S 2: 4803.000.160S–.162S 2: 4703.000.170S–.188S 2: 4903.000.189S–.197S 2: 5003.000.200S–.218S 2: 4903.000.219S–.227S 2: 5003.000.230S–.235S 2: 4403.000.236S–.241S 2: 4503.000.245S–.247S 2: 4603.000.248S–.250S 2: 4703.000.300S–.339S 2: 4203.000.340S–.343S 2: 4303.000.360S–.365S 2: 4803.000.390–.396 2: 4303.010.100–.102 2: 3205.001.000–.017 2: 605.001.020, .021 2: 705.001.022 2: 605.001.025 2: 705.001.026 2: 605.001.027–.037 2: 705.001.038–.055 2: 805.001.060, .061 2: 905.001.063 2: 805.001.064 2: 1005.001.065–.071 2: 905.001.074, .075 2: 1005.001.080–.091 2: 505.001.094–.099 2: 1005.001.095 2: 3605.001.100–.102 2: 1005.001.103 2: 905.001.104, .105 2: 1005.001.108 2: 905.001.110 2: 705.001.111 2: 905.001.120 2: 805.001.121 2: 1005.001.122 2: 905.001.123 2: 805.001.140 2: 3005.001.177 2: 905.001.183 2: 805.001.185 2: 905.001.201–.206 2: 1705.001.204 2: 30
05.001.207 2: 1905.001.208 2: 1705.001.210 2: 1905.001.212 2: 1805.001.213 2: 1905.001.214–.216 2: 2005.001.217, .219 2: 1805.001.218, .220 2: 1905.001.221 2: 1805.001.222 2: 1905.001.224–.226 2: 2005.001.227 2: 17, 3105.001.250–.254 2: 1305.002.201S–.405S 2: 3805.003.100S–.139S 2: 39105.954, .955 2: 11150.001 2: 55150.119 2: 21150.119TR 2: 22150.119JR 2: 22150.16 2: 26306.763 2: 52310.90–.93K 2: 34338.49 2: 34351.16J 2: 34510.191 2: 32510.20 2: 32511.20, .30 2: 32511.411–.418 2: 32511.701 2: 27511.770–.777 2: 29, 33511.73–.784 2: 28511.785, .786 2: 27511.791 2: 29511.80–.902 2: 27511.904 2: 33511.905S–.915S 2: 40512.55 2: 51512.77–.79 2: 51513.01–.19 2: 51516.101 2: 33518.01, .09 2: 29519.100S–.106S 2: 37519.107S–.109S 2: 38519.113S 2: 37519.114S–.118S 2: 38519.150S–.250S 2: 37519.40 2: 33519.50–.53S 2: 35519.97 2: 36520.89–.89Y 2: 36530.200–.280 2: 30530.605 2: 23530.610, .615 2: 23530.620–.681 2: 24, 30530.730–.732 2: 24
530.741 2: 24530.750 2: 24530.760–.790 2: 25532.002–.012 2: 12532.015 2: 13532.017–.022 2: 14532.023–.031 2: 15532.032, .033 2: 31532.041S–.067S 2: 40532.081S–.095S 2: 4160.550.010–.017 2: 5460.550.050 2: 260.550.140–.550.143 2: 5368.000.007 2: 5268.001.002 2: 5368.001.605 2: 53690.355 2: 54690.525 2: 54690.570–.575 2: 53690.576.04 2: 54690.578–.597 2: 52ACB 1: 3, 6A-CRN 1: 11A-CRN-M 1: 11A-CRN-S 1: 11ADG 1: 11ADG-10 1: 11ADG-11 1: 11ADG-13 1: 11ADG-155 1: 11AL-III-30 1: 3AL-III-DISS-20 1: 3AL-III-DISS-30 1: 3AL-III-IRR-MA7 1: 3AUTOLUBE-III 1: 3AUTOLUBE-III-20 1: 3AUTOLUBE-III-DISS 1: 3AUTOLUBE-III-FG 1: 3AUTOLUBE-III-FG7 1: 3AUTOLUBE-III-IRR 1: 3AUTOLUBE-III-MA7 1: 3AUTOLUBE-III-NK 1: 3B-BLACK 1: 16B-BLUE-S 1: 15B-CASE-TRAY 1: 3B-COLLECTOR-1 1: 27B-COLLECTOR-BX 1: 27B-GOLD 1: 18B-GREEN 1: 18B-GREEN-R 1: 18B-GREY-ADG 1: 18B-GREY-MIA16 1: 17B-GREY-MIA20 1: 17B-MRA-L 1: 18B-MRA-M 1: 18B-MRA-S 1: 18
Instruments and implants approved by the AO Foundation 11/11
N-2
Numerical Index
Section numbers are listed in bold.
Num
eric
alIn
dex
B-OIL 1: 3B-ORANGE-45 1: 18B-ORANGE-90 1: 18B-QD11 1: 22B-QD11-S 1: 22B-QD14 1: 22B-QD14-S 1: 22B-QD8 1: 21B-QD8-S 1: 21B-RED 1: 17B-SAGITTAL 1: 25B-SILVER 1: 14B-TURQ-CDA 1: 18B-TURQ-L 1: 16B-TURQUOISE 1: 14B-TURQ-X 1: 18B-VIOLET 1: 15BLA-1 1: 16BLA-10 1: 16BLA-11 1: 16BLA-14 1: 16BLA-15 1: 16BLA-2 1: 16BLA-24 1: 16BLA-3 1: 16BLA-32 1: 16BLA-38 1: 16BLA-4 1: 16BLA-5 1: 16BLA-51 1: 16BLA-6 1: 16BLA-7 1: 16BLA-7-9 1: 16BLA-8 1: 16BLA-9 1: 16BLACKMAX-N 1: 2BLACKMAX-N-LP 1: 2BLU-1 1: 15BLU-10 1: 15BLU-11 1: 15BLU-14 1: 15BLU-17-1 1: 15BLU-17-2 1: 15BLU-17-3 1: 15BLU-17-4 1: 15BLU-17-5 1: 15BLU-17-6 1: 15BLU-24 1: 15BLU-27 1: 15BLU-2S-25 1: 15BLU-2XL 1: 15BLU-3 1: 15BLU-32 1: 15BLU-38 1: 15BLU-39 1: 15BLU-4 1: 15
BLU-40-55 1: 15BLU-47 1: 15BLU-5 1: 15BLU-51 1: 15BLU-6 1: 15BLU-7 1: 15BLU-7-9 1: 15BLU-8 1: 15BLU-8-18 1: 15BLU-8D-32 1: 15BLU-8D-32C 1: 15BLU-8-M 1: 15BLU-9 1: 15BLU-9-5 1: 15BLU-9-68 1: 15BLU-9DCX 1: 15BLU-CS5 1: 15BLU-CS6 1: 15BLU-CS7 1: 15BLU-LS9-35 1: 15BLU-LS9-5 1: 15BLU-LS9-5E 1: 15BM-COUPLER 1: 28BM-DRIVER 1: 24CDA 1: 11CDA-1R 1: 11COUPLER 1: 28CPERF-14-11-3F 1: 27CRANI-A 1: 11CRANI-A-R 1: 11CRANI-L 1: 11CRANI-P 1: 11CSR60 1: 27CSR60BM 1: 27CSRSC 1: 27CSRSC-BM 1: 27DRIVER 1: 24E12 1: 7E12-HC 1: 7E-FP 1: 6, 7E-FP-DIR/IRR 1: 6EMAX2-HC 1: 6EMAX2PLUS 1: 6EMAX2-TRAY 1: 6FILTER-II 1: 3GOL-2 1: 18GOL-2S 1: 18GRE-1 1: 18GRE-1-M 1: 18GRE-1S 1: 18GREY-471-25 1: 18GREY-471-50 1: 18GREY-471-70 1: 18GREY-472-00 1: 18GREY-MIA16-17-2 1: 17GREY-MIA16-17-3 1: 17
GREY-MIA16-17-4C 1: 17GREY-MIA16-3 1: 17GREY-MIA16-4 1: 17GREY-MIA16-8 1: 17GREY-MIA20-17-2C 1: 17GREY-MIA20-17-3 1: 17GREY-MIA20-17-3C 1: 17GREY-MIA20-17-4 1: 17GREY-MIA20-17-4C 1: 17GREY-MIA20-17-75C 1: 17GREY-MIA20-3 1: 17GREY-MIA20-4 1: 17GREY-MIA20-7 1: 17GREY-MIA20-7-9 1: 17GREY-MIA20-8 1: 17HOSE 1: 3HOSE-01 1: 3HOSE-10 1: 3HOSE-10-DISS 1: 3HOSE-15-DISS 1: 3HOSE-20-DISS 1: 3HOSE-5 1: 3HOSE5-DISS 1: 3HOSEDISS 1: 3IMRI-A-CRN 1: 5IMRI-CRANI-A 1: 5IMRI-FOOT-CTRL 1: 5IMRI-MOTOR 1: 5IMRI-OIL 1: 5IMRI-S-1004TD 1: 5IMRI-S-1R 1: 5IMRI-S-4B 1: 5IMRI-S-8NS-M 1: 5IMRI-SHD-6B 1: 5IMRI-SHORT 1: 5IMRI-SHORT-HD 1: 5IRR-CLIP-10 1: 4IRR-CLIP-20 1: 4IRR-CLIP-30 1: 4IRR-CLIP-40 1: 4IRR-CLIP-50 1: 4IRR-CLIP-60 1: 4IRRIGATE-TUBE 1: 4IRRIGATE-TUBE-HF 1: 4IRR-PUMP-II 1: 4L-1R 1: 10L-1SB 1: 10L-1SD 1: 10L-10DRC 1: 10L-2SB 1: 10L-2SD 1: 10L-3SB 1: 10L-3SD 1: 10L-3SDC 1: 10L-35DR 1: 10L-4B 1: 10
Section numbers are listed in bold.
11/11
N-3N
umerical
Index
Numerical Index
L-4BA-S 1: 10L-4B-C 1: 10L-4D 1: 10L-4DC 1: 10L-4DRM 1: 10L-4DX 1: 10L-4OV 1: 10L-5AC 1: 10L-5B 1: 10L-5BA 1: 10L-5B-C 1: 10L-5D 1: 10L-5DC 1: 10L-5DRC 1: 10L-5DRM 1: 10L-5DX 1: 10L-5OV 1: 10L-56OV 1: 10L-58OV 1: 10L-6B 1: 10L-6D 1: 10L-6DC 1: 10L-6DRC 1: 10L-6DX 1: 10L-68DRMDX 1: 10L-7AC 1: 10L-7B 1: 10L-7DRC 1: 10L-7DRC-11 1: 10L-8DRC 1: 10L-8DRC-11 1: 10L-8DX 1: 10L-8N 1: 10L-8ND 1: 10L-8NS 1: 10L-8NSD 1: 10L-8NSDC 1: 10L-8NS-M 1: 10L-8NS-M-C 1: 10L-9B 1: 10L-9DRC 1: 10L-CRN 1: 11L-CRN-S 1: 11LHD-3SB 1: 13LHD-4B 1: 13LHD-47-5 1: 13LHD-5B 1: 13LHD-5DRM 1: 13LHD-5DRM-12 1: 13LHD-5DRM-L 1: 13LHD-64DRM 1: 13LHD-6AC 1: 13LHD-6B 1: 13LHD-7B 1: 13LHD-8NS 1: 13LHD-8NS-M 1: 13
LHD-95DRM 1: 13LHD-LS9-35 1: 13LHD-LS9-5 1: 13LHD-LS9-76 1: 13LONG 1: 10LONG-HD 1: 13LONG-S 1: 10LS-3405 1: 25, 26LS-3406 1: 25, 26LS-3407 1: 25, 26LS-3408 1: 25, 26LS-3409 1: 25, 26LS-3410 1: 25, 26LS-3411 1: 25, 26LS-3412 1: 25, 26LS-3413 1: 25, 26M-05D 1: 9M-05SD 1: 9M-1B 1: 9M-1D 1: 9M-1DC 1: 9M-1R 1: 9M-1SB 1: 9M-1SD 1: 9M-1SDC 1: 9M-15D 1: 9M-15SD 1: 9M-15SDC 1: 9M-2B 1: 9M-2D 1: 9M-2DC 1: 9M-2SB 1: 9M-2SD 1: 9M-2SDC 1: 9M-25SD 1: 9M-3B 1: 9M-3D 1: 9M-3DC 1: 9M-3DC-2 1: 9M-3SB 1: 9M-3SB-2 1: 9M-3SD 1: 9M-3SDC 1: 9M-35SD 1: 9M-35SDC 1: 9M-4B 1: 9M-4D 1: 9M-4DC 1: 9M-4DX 1: 9M-4FD 1: 9M-4OV 1: 9M-5AC 1: 9M-5B 1: 9M-5B-2 1: 9M-5BA-20 1: 9M-5B-C 1: 9
M-5D 1: 9M-5DC 1: 9M-5OV 1: 9M-55OV-C 1: 9M-56OV 1: 9M-58OV 1: 9M-6B 1: 9M-6B-C 1: 9M-6D 1: 9M-6DC 1: 9M-6DC-2 1: 9M-6DX 1: 9M-6DX-20 1: 9M-6P 1: 9M-7AC 1: 9M-7B 1: 9M-8N 1: 9M-8ND 1: 9M-8NS 1: 9M-8NSD 1: 9M-8NS-M 1: 9M-8NS-M-C 1: 9MA10-08SD 1: 20MA10-15SB 1: 20MA10-1SB 1: 20MA10-25SB 1: 20MA10-2SB 1: 20MA10-2SD 1: 20MA10-3SB 1: 20MA10-3SD 1: 20MA10-4D 1: 20MA10-8N 1: 20MA10-8N-18 1: 20MA10-8NS 1: 20MA10-8NSDC 1: 20MA-10C 1: 20MA-10S 1: 20MA15-15SD 1: 20MA15-2SB 1: 20MA15-2SD 1: 20MA15-3SB 1: 20MA15-3SD 1: 20MA15-4D 1: 20MA15-4DC 1: 20MA15-8N 1: 20MA15-8N-18 1: 20MA15-8NS 1: 20MA15-8NSDC 1: 20MA-15C 1: 20MA-15S 1: 20MA-15ST 1: 20MA19-15SD 1: 20MA19-2SB 1: 20MA19-2SD 1: 20MA19-3SB 1: 20MA19-3SD 1: 20
N-4N
umer
ical
Inde
x
Numerical Index
MA19-4D 1: 20MA19-8N 1: 20MA19-8N-18 1: 20MA19-8NS 1: 20MA19-8NSDC 1: 20MA-19ST 1: 20MA-D20 1: 20MA-D20BM 1: 20MA-DRIVER 1: 20MCA 1: 19MCA5-05SD 1: 19MCA5-06SD 1: 19MCA5-07SD 1: 19MCA5-08SD 1: 19MCA5-15SB 1: 19MCA5-15SD 1: 19MCA5-1SB 1: 19MCA5-1SD 1: 19MCA5-2SB 1: 19MCA5-2SD 1: 19MCA7-05SD 1: 19MCA7-06SD 1: 19MCA7-07SD 1: 19MCA7-08SD 1: 19MCA7-15SB 1: 19MCA7-15SD 1: 19MCA7-1SB 1: 19MCA7-1SD 1: 19MCA7-2SB 1: 19MCA7-2SD 1: 19MEDIUM 1: 9MEDIUM-HD 1: 12MHD-126B-3F 1: 12MHD-15C 1: 12MHD-16CT 1: 12MHD-17DD 1: 12MHD-19CT 1: 12MHD-25DD 1: 12MHD-25R 1: 12MHD-3DRMC 1: 12MHD-62DRM 1: 12MHD-6AC 1: 12MHD-6B 1: 12MHD-8NS 1: 12MHD-8NS-M 1: 12MHD-95DRM 1: 12MHD-97B 1: 12MHD-98B 1: 12MIA16 1: 10MIA16-3SB 1: 10MIA16-4B 1: 10MIA16-4D 1: 10MIA16-4DC 1: 10MIA16-5D 1: 10MIA16-5OV 1: 10MIA16-6B 1: 10
MIA16-6DC 1: 10MIA16-6DX 1: 10MIA16-8NS 1: 10MM-CASE-TRAY 1: 3MM-CTR-RACK 1: 3MM-CTR-RACK 1: 6MM-SAGITTAL 1: 25MO-3001 1: 23, 26MO-3002 1: 23, 26MO-3003 1: 23, 26MO-3005 1: 23, 26MO-3006 1: 23, 26MO-3105 1: 23, 26MO-3225 1: 23, 26MO-3515 1: 23, 26MOM 1: 3MOTOR-CASE 1: 3MR-0500 1: 23, 26MR-0520 1: 23, 26MR-0540 1: 23, 26MR-0560 1: 23, 26MR-0580 1: 23, 26MR-0600 1: 23, 26MR-14006 1: 23, 26MRA-8L 1: 18MRA-8M 1: 18MRA-8S 1: 18MS-3100C 1: 25, 26MS-3101 1: 23, 26MS-3101C 1: 23, 26MS-3102 1: 23, 26MS-3104 1: 23, 26MS-3105 1: 23, 26MS-3106 1: 23, 26MS-3108 1: 23, 26MS-3225 1: 23, 26MS-3231 1: 25, 26MS-3240 1: 25, 26MS-3515 1: 23, 26OIL-II 1: 3ORANGE-45 1: 11ORANGE-90 1: 11ORNG-1 1: 11, 18ORNG-1275 1: 11, 18ORNG-33 1: 11, 18ORNG-35 1: 11, 18ORNG-36 1: 11, 18ORNG-37 1: 11, 18ORNG-8-18 1: 11, 18ORNG-8-18 1: 18O-SAW 1: 23P-CRN 1: 11P-CRN-M 1: 11PG 1: 3QD11 1: 22QD11-1R 1: 22
QD11-1SB 1: 22QD11-1SD 1: 22QD11-2SB 1: 22QD11-2SD 1: 22QD11-3BA-A 1: 22QD11-3SB 1: 22QD11-3SD 1: 22QD11-3SDC 1: 22QD11-45DRMDX 1: 22QD11-4AC 1: 22QD11-4B 1: 22QD11-4BA-A 1: 22QD11-4D 1: 22QD11-4DC 1: 22QD11-4DRM 1: 22QD11-4DX 1: 22QD11-4OV 1: 22QD11-4OVD 1: 22QD11-4OVDC 1: 22QD11-5AC 1: 22QD11-5B 1: 22QD11-5B-A 1: 22QD11-5BA-A 1: 22QD11-5D 1: 22QD11-5DC 1: 22QD11-5DRM 1: 22QD11-5DX 1: 22QD11-5OV 1: 22QD11-62DRM 1: 22QD11-6AC 1: 22QD11-6B 1: 22QD11-6BA-A 1: 22QD11-6D 1: 22QD11-6DC 1: 22QD11-6DX 1: 22QD11-7B 1: 22QD11-7DX 1: 22QD11-8N 1: 22QD11-8N-18 1: 22QD11-8ND 1: 22QD11-8NS 1: 22QD11-8NSDC 1: 22QD11-8NS-M 1: 22QD11-S 1: 22QD14 1: 22QD14-1SD 1: 22QD14-2SD 1: 22QD14-3SB 1: 22QD14-3SD 1: 22QD14-47DRM 1: 22QD14-4B 1: 22QD14-4BA 1: 22QD14-4D 1: 22QD14-4DC 1: 22QD14-4OV 1: 22QD14-5B 1: 22
Instruments and implants approved by the AO Foundation 11/11
Section numbers are listed in bold.
N-5N
umerical
Index
Numerical Index
QD14-5B-A 1: 22QD14-5D 1: 22QD14-5DC 1: 22QD14-6B 1: 22QD14-6D 1: 22QD14-6DX 1: 22QD14-8N 1: 22QD14-8N-18 1: 22QD14-8ND 1: 22QD14-8NS 1: 22QD14-S 1: 22QD8 1: 21QD8-05B 1: 21QD8-05SD 1: 21QD8-15SB 1: 21QD8-15SD 1: 21QD8-15SDC 1: 21QD8-1R 1: 21QD8-1SB 1: 21QD8-1SD 1: 21QD8-1SDC 1: 21QD8-25SB 1: 21QD8-25SD 1: 21QD8-25SDC 1: 21QD8-2SB 1: 21QD8-2SD 1: 21QD8-2SDC 1: 21QD8-35SD 1: 21QD8-35SDC 1: 21QD8-3SB 1: 21QD8-3SD 1: 21QD8-3SD-100 1: 21QD8-3SDC 1: 21QD8-4B 1: 21QD8-4D 1: 21QD8-4DC 1: 21QD8-4DRM 1: 21QD8-4DX 1: 21QD8-4OV 1: 21QD8-4OVD 1: 21QD8-5AC 1: 21QD8-5B 1: 21QD8-5B-2 1: 21QD8-5BA 1: 21QD8-5D 1: 21QD8-5D-2 1: 21QD8-5DC 1: 21QD8-5DX 1: 21QD8-5OV 1: 21QD8-62BE 1: 21QD8-62DRM 1: 21QD8-6AC 1: 21QD8-6B 1: 21QD8-6D 1: 21QD8-6DC 1: 21QD8-6DX 1: 21
QD8-7B 1: 21QD8-8N 1: 21QD8-8N-18 1: 21QD8-8ND 1: 21QD8-8NS 1: 21QD8-S 1: 21RED-1 1: 17RED-10 1: 17RED-11 1: 17RED-17-55C 1: 17RED-17-75C 1: 17RED-2 1: 17RED-24 1: 17RED-3 1: 17RED-32 1: 17RED-38 1: 17RED-4 1: 17RED-5 1: 17RED-6 1: 17RED-7 1: 17RED-7-9 1: 17RED-8 1: 17RED-9 1: 17R-SAW 1: 23S-05D 1: 8S-06SD 1: 8S-08SD 1: 8S-1B 1: 8S-1B-C 1: 9S-1D 1: 8S-1DC 1: 8S-1R 1: 8S-1SB 1: 8S-1SB-C 1: 9S-1SD 1: 8S-1SDC 1: 8S-1203TD 1: 8S-1254TD 1: 8S-12D 1: 8S-1504TD 1: 8S-1506TD 1: 8S-1506TD-M 1: 8S-1510TD 1: 8S-15B 1: 8S-15D 1: 8S-15DC 1: 8S-15DCT 1: 8S-15DRMC 1: 9S-15DRMC-L 1: 9S-15SB 1: 8S-15SD 1: 8S-15SDC 1: 8S-2004TD 1: 8S-2006TD 1: 8S-2433TD 1: 8S-25B 1: 8
S-25D 1: 8S-25DC 1: 8S-25SB 1: 8S-25SD 1: 8S-25SDC 1: 8S-2B 1: 8S-2B-C 1: 9S-2D 1: 8S-2DC 1: 8S-2SB 1: 8S-2SB-C 1: 9S-2SBT 1: 8S-2SD 1: 8S-2SD-120 1: 8S-2SDC 1: 8S-2SDCT 1: 8S-3B 1: 8S-3B-C 1: 9S-3D 1: 8S-3DC 1: 8S-3SB 1: 8S-3SB-C 1: 9S-3SBT 1: 8S-3SD 1: 8S-3SD-100 1: 8S-3SDC 1: 8S-3SDC-50 1: 8S-3SDCT 1: 8S-35B 1: 8S-35D 1: 8S-35DC 1: 8S-35SB 1: 8S-35SD 1: 8S-4B 1: 8S-4B-C 1: 9S-4BL-C 1: 9S-4BT 1: 8S-4D 1: 8S-4D-100 1: 8S-4DC 1: 8S-4D-L 1: 8S-4DX 1: 8S-4OV 1: 8S-5AC 1: 8S-5B 1: 8S-5B-12F 1: 8S-5B-C 1: 9S-5D 1: 8S-5D-100 1: 8S-5DC 1: 8S-5DC-40 1: 8S-5DX 1: 8S-68DRMDC 1: 8S-68DRMDX 1: 8S-6AC 1: 8S-6B 1: 8
11/11
Section numbers are listed in bold.
N-6N
umer
ical
Inde
x
Numerical Index
S-6B-C 1: 9S-6D 1: 8S-6DC 1: 8S-6DX 1: 8S-6IP 1: 8S-6P 1: 8S-6PD 1: 8S-6R 1: 8S-7B 1: 8S-7B-C 1: 9S-7IP 1: 8S-8B 1: 8S-8DC 1: 8S-8N 1: 8S-8N-18 1: 8S-8ND 1: 8S-8N-L 1: 8S-8NS 1: 8S-8NSD 1: 8S-8NS-M 1: 8S-9AC 1: 8S-9B 1: 8SA-JACOBS 1: 24SA-JLATCH 1: 24SC2101 1: 7SC2102 1: 6SCHRADER-F 1: 3SHD-1504TD 1: 12SHD-17DD 1: 12SHD-25DD 1: 12SHD-25R 1: 12SHD-3-10 1: 12SHD-325DS 1: 12SHD-4892DS 1: 12SHD-5B 1: 12SHD-6AC 1: 12SHD-6B 1: 12SHD-6DX 1: 12SHD-6R 1: 12SHD-75AC 1: 12SHD-75AC-A 1: 12SHD-7B 1: 12SHD-8NS 1: 12SHD-9AC 1: 12SHD-DS-A 1: 12SHORT 1: 9SHORT-HD 1: 12SIL-0 1: 14SIL-1 1: 14SIL-10 1: 14SIL-11 1: 14SIL-1-3 1: 14SIL-14 1: 14SIL-14-17 1: 14SIL-15 1: 14SIL-1510 1: 14
SIL-16 1: 14SIL-16-5 1: 14SIL-16XL2 1: 14SIL-17-1 1: 14SIL-17-1C 1: 14SIL-17-2 1: 14SIL-17-2C 1: 14SIL-17-3 1: 14SIL-17-3C 1: 14SIL-17-4 1: 14SIL-17-4C 1: 14SIL-17-4CX 1: 14SIL-17-5 1: 14SIL-17-5C 1: 14SIL-17-5CX 1: 14SIL-17-6 1: 14SIL-17-6C 1: 14SIL-17-6CX 1: 14SIL-18 1: 14SIL-19 1: 14SIL-1S 1: 14SIL-2 1: 14SIL-20 1: 14SIL-21 1: 14SIL-22 1: 14SIL-23 1: 14SIL-24 1: 14SIL-2S 1: 14SIL-2XL 1: 14SIL-3 1: 14SIL-3-10 1: 14SIL-32 1: 14SIL-38 1: 14SIL-39 1: 14SIL-4 1: 14SIL-464-4 1: 14SIL-466-6 1: 14SIL-47 1: 14SIL-5 1: 14SIL-6 1: 14SIL-7 1: 14SIL-7-9 1: 14SIL-8 1: 14SIL-8-18 1: 14SIL-8D-32 1: 14SIL-8-M 1: 14SIL-9 1: 14SIL-DS-A 1: 14SS1 1: 28SS2 1: 28SS2C 1: 28S-SAW 1: 23TURQ-0-1 1: 14TURQ-1 1: 14, 18TURQ-1-M 1: 18TURQ-17-2 1: 14
TURQ-17-2C 1: 14TURQ-17-3 1: 14TURQ-17-4 1: 14TURQ-17-4CX 1: 14TURQ-17-5 1: 14TURQ-17-5C 1: 14TURQ-17-5CX 1: 14TURQ-17-6 1: 14TURQ-17-6CX 1: 14TURQ-3 1: 14TURQ-4 1: 14TURQ-404-4 1: 14TURQ-406-6 1: 14TURQ-434-4 1: 14TURQ-436-6 1: 14TURQ-5 1: 14TURQ-6 1: 14TURQ-7 1: 14TURQ-8 1: 14TURQ-8-18 1: 14TURQ-8-23 1: 14TURQ-8D-25 1: 14TURQ-8-M 1: 14TURQ-L1 1: 16TURQ-L17-1 1: 16TURQ-L17-1C 1: 16TURQ-L17-2 1: 16TURQ-L17-2C 1: 16TURQ-L17-3 1: 16TURQ-L17-3C 1: 16TURQ-L17-4 1: 16TURQ-L17-4C 1: 16TURQ-L17-4CX 1: 16TURQ-L17-5 1: 16TURQ-L17-5C 1: 16TURQ-L17-5CX 1: 16TURQ-L17-6 1: 16TURQ-L17-6C 1: 16TURQ-L17-6CX 1: 16TURQ-L17-75C 1: 16TURQ-L17-7CX 1: 16TURQ-L3 1: 16TURQ-L4 1: 16TURQ-L40-4 1: 16TURQ-L40-5 1: 16TURQ-L5 1: 16TURQ-L6 1: 16TURQ-L8 1: 16TURQ-L8-18 1: 16TURQ-L8-23 1: 16TURQ-L8D-25 1: 16TURQ-L8D-32L 1: 16TURQ-L8-L 1: 16TURQ-L8-M 1: 16TURQ-L9-58 1: 16TURQ-LS7 1: 16
Instruments and implants approved by the AO Foundation 11/11
Section numbers are listed in bold.
N-7N
umerical
Index
Numerical Index
VIO-1 1: 15VIO-10 1: 15VIO-14 1: 15VIO-17-1 1: 15VIO-17-2 1: 15VIO-17-3 1: 15VIO-17-3C 1: 15VIO-17-4 1: 15VIO-17-4C 1: 15VIO-17-4CX 1: 15VIO-17-5 1: 15VIO-17-5C 1: 15VIO-17-5CX 1: 15VIO-17-6 1: 15VIO-17-6C 1: 15VIO-17-6CX 1: 15VIO-2 1: 15VIO-24 1: 15VIO-2XL 1: 15VIO-3 1: 15VIO-32 1: 15VIO-38 1: 15VIO-39 1: 15VIO-4 1: 15VIO-40-4 1: 15VIO-40-5 1: 15VIO-40-55 1: 15VIO-5 1: 15VIO-6 1: 15VIO-7 1: 15VIO-7-2 1: 15VIO-7-9 1: 15VIO-8 1: 15VIO-8-18 1: 15VIO-87-5 1: 15VIO-87-8 1: 15VIO-8D-32 1: 15VIO-8-M 1: 15VIO-9 1: 15VIO-9-5 1: 15VIO-97B 1: 15VIO-97C 1: 15VIO-98B 1: 15VIO-98C 1: 15VIO-99C 1: 15XL-HD 1: 13XLHD-25R 1: 13XLHD-3SB 1: 13XLHD-4B 1: 13XLHD-51C 1: 13XLHD-55DC 1: 13XLHD-5B 1: 13XLHD-6AC 1: 13XLHD-6B 1: 13XLHD-75AC 1: 13XLHD-7B 1: 13
XLHD-8NS 1: 13XLHD-8NS-M 1: 13XLHD-95DRM 1: 13XLHD-9B 1: 13XMAX 1: 2XM-CASE 1: 3
11/11
Section numbers are listed in bold.
11/11
Alphabetical Index
Section numbers are listed in bold.
A Adaptor for Radiolucent Drive 2: 15, 20, 24Air hoses 2: 5, 35Air Pen Drive sets 2: 2, 3Air Pen Drive and accessories 2: 5Angle attachments and dissection tools 1: 21, 22Anspach standard attachments
and dissection tools 1: 8-13Autoclavable oil 2: 36
B Batteries and battery charger 2: 30, 31Battery oscillator 2: 23Battery Power Line accessories 2: 24, 25Battery Power Line sets 2: 21, 22Battery reamer/drill 2: 23Battery reciprocator 2: 23Black Max Pneumatic System 1: 2Black Max standard attachments
and dissection tools 1: 14-18Bone collector 1: 27Broaches 2: 48Burrs 2: 44–47, 49, 50Burr attachments 2: 8
C Chucks 2: 8, 13, 17, 19, 24, 28, 34Cleaning brushes 2: 33Compact Air Drive II and accessories 2: 27–29ComPact Air Drive set 2: 26Compact SpeedReducer 1: 27Compartmental Pressure Monitoring System 2: 55Contra and right angle attachments 1: 11, 18Couplers 1: 28Cranial perforator 1: 27Craniotomes 1: 11, 18Cutting Tools for Electric Pen Drive
and Air Pen Drive 2: 44–50
D Drilling attachments 2: 8, 18, 25Drill bits 2: 48, 51
for Radiolucent Drive 2: 32Drivers 1: 24
E e12 Electric Instrument System and accessories 1: 7Electric High Performance Instrument System 1: 6Electric Pen Drive and accessories 2: 6–10Electric Pen Drive sets 2: 4eMax 2 Plus Instrument System and accessories 1: 6
G Graphic cases 2: 52–54
H Heavy duty attachments 1: 12, 13
I iMRI System and attachments 1: 5Irrigation clips 1: 4Irrigation nozzles 2: 9
K KAM SuperSucker Disposable Suction Tips/Filters 1: 28K-Wire attachment 2: 7
L Lindemann reamers 2: 48, 50
M MA attachments and dissection tools 1: 20Micro Curved Attachment (MCA)
and dissection tools 1: 19Micro Revision Attachments (MRA) 1: 18microSaws 1: 23Mini Compressed Air Machine accessories 2: 51Minimal access attachments 1: 20Minimally Invasive Attachments (MIA) 1: 17
N Nitrogen regulators 2: 36
O Oscillating bone saw 2: 29
P Pneumatic High Performance Instrument Systems 1: 2Pneumatic High Performance Instrument
System accessories 1: 3Powered Irrigation System 1: 4
Q Quick couplings 2: 12–14, 17–19, 24, 25, 28, 29Quick Disconnect (QD) angle attachments 1: 21, 22 R Radiolucent drive 2: 32Rasps 2: 48Reaming attachments 2: 19, 25Reduction drive units 2: 14, 27, 28
Alp
habe
tical
Inde
xA-1
Alphabetical
Index
Instruments and implants approved by the AO Foundation 11/11
Alphabetical Index
S Sagittal Saws
Anspach 1: 25Saw attachments 2: 8, 14, 15, 20, 27Saw Blades
Anspach 1: 26for Large Reciprocating Saw Attachments 2: 40for Mini Reciprocating and Oscillating Saws 2: 51for Oscillating Saws 2: 37–43for Pen Drive Saws 2: 42, 43for Small Battery Drive 2: 40–43parallel 2: 41
Screw attachments 2: 7, 13, 20Small attachments, Anspach 1: 24Small Battery Drive and accessories 2: 12–15Small Battery Drive sets 2: 11Small Bone High Performance Instrument System 1: 7Specialty attachments 1: 11, 18Sternum top 2: 33Straight attachments 1: 8-10, 14-17
T Torque calibration units 2: 9Torque limiting attachments 2: 20, 29, 33Trauma Recon System set 2: 16Trauma Recon System accessories 2: 17–20
X XMax Pneumatic System 1: 2
Section numbers are listed in bold.
A-2
© 2011 Synthes, Inc. or its affiliates. All rights reserved. Printed in U.S.A. 12/11 20-0070 rev A J10412-A
www.synthes.comwww.anspach.com
Synthes Anspach4500 Riverside DrivePalm Beach Gardens, FL 33410Telephone: (561) 627-1080To order: (800) 327-6887Fax: (800) 327-6661E-mail: [email protected]
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
Catalo
g–
Pow
er Too
ls 2012