Catalogo ISC 2014

climb. work. rescue.

Solutions in Metal

Photo courtesy of LBO, Norway

forefront of climbing, rigging and rescue product development for more than 15 years and our products are distributed and used in over 25

countries worldwide.

We supply products globally to the working at height industry which

includes Rope Access, Arborists, Emergency Services, Ropes Course,

Climbing Walls and Industrial Fall Protection users as well as the Motor

Racing, Military and other specialist markets.

audited and accredited by SGS.

conception, le développement et la fabrication d'éléments d'ingénierie

développement de produits d'alpinisme, de levage et de sauvetage depuis plus de 15 ans et nos produits sont distribués et utilisés dans

plus de 25 pays à travers le monde.

Nous fournissons des produits à des entreprises pratiquant le travail en

hauteur, notamment les arboriculteurs, les services d'urgence, les

centres proposant des parcours acrobatiques ou des murs d'escalade

protection contre les chutes. Nous fournissons également le secteur des

courses automobiles, l'armée et d'autres marchés spécialisés.

protection

audité et accrédité par SGS.

Bienvenue dans le catalogue de produits ISC

Welcome to the ISC product catalogue

ISC es una empresa conocida mundialmente que se especializa en el

diseño, desarrollo y fabricación de componentes de seguridad crítica y

otras ‘Soluciones de Metal’. Hemos liderado el desarrollo de productos

de alpinismo, jarcia y de rescate durante más de 15 años y nuestros

Suministramos productos en todo el globo para los trabajadores de

sectores de trabajos en alturas, como la arboricultura, los servicios de

emergencia, los circuitos de cuerdas, las paredes de escalada y la

prevención de caídas en la industria, además de las carreras de motor,

el sector militar y otros mercados especializados.

Los productos ISC cumplen con los estándares internacionales, como la Directiva 686/89/CEE relativa a los equipos de Protección Individual,

la norma ANSI Z359 y la NFPA 1983, y se fabrican de acuerdo con el

sistema de garantía de calidad ISO9001/2008 auditado y reconocido

por la organización SGS.

ontwerp, de ontwikkeling en de productie van machinaal vervaardigde

onderdelen voor veiligheidsuitrusting en andere 'Oplossingen van

Metaal'. We nemen al meer dan 15 jaar het voortouw als het gaat om de ontwikkeling van klim-, hijs- en reddingsproducten en onze

producten worden in meer dan 25 landen overal ter wereld verkocht

en gebruikt.

wordt gewerkt, waaronder bosbouw, hulpdiensten, touwparcoursen,

specialistische sectoren zoals de motorsport en het leger.

De producten van ISC voldoen aan internationale normen, waaronder CE (richtlijn 686/89/EEC betreffende persoonlijke beschermingsmid-

delen), ANSI Z359 en NFPA 1983, en worden vervaardigd in

overeenstemming met een ISO9001/2008-kwaliteitsbewakingsysteem

dat door SGS is getest en goedgekeurd.

Welkom bij de productcatalogus van ISC

ISC ist ein weltweit anerkanntes Unternehmen, das sich auf die

Konzeption, Entwicklung und Fertigung von Sicherheitskomponenten

und sonstigen ‘Lösungen aus Metall‘ spezialisiert hat. Wir stehen seit

über 15 Jahren an der Spitze der Produktentwicklung für Kletter-, Spannsystem- und Rettungslösungen, und unsere Produkte werden in

über 25 Ländern vertrieben.

Wir liefern weltweit Produkte für alle Arten von Höhenarbeiten wie

Baumpflege, Rettungsdienste, Hochseilparcours, Kletterwände und

industrielle Absturzsicherung sowie für Motorsport, militärische

Zwecke und sonstige Spezialmärkte.

ISC-Produkte entsprechen internationalen Standards wie CE (PPE Richtlinie 686/89), ANSI Z359 und NFPA 1983. Sie werden gemäß

einem ISO9001/2008-Qualitätssicherungssystem von der SGS

hergestellt, geprüft und zugelassen.

Herzlich willkommen zum ISC-Produktkatalog

ISC è un'azienda di livello mondiale specializzata in progettazione,

sviluppo e realizzazione di importanti componenti tecnici di sicurezza e

altre ‘Soluzioni in Metallo’. Da oltre 15 anni siamo all'avanguardia nello

sviluppo di prodotti per l'alpinismo, per i sistemi di paranchi e per le operazioni di salvataggio e i nostri prodotti vengono distribuiti e

utilizzati in più di 25 paesi nel mondo.

Forniamo prodotti a livello globale per il settore del lavoro in quota,

che include arboricoltura, servizi di emergenza, percorsi elevati,

arrampicate e utenti di protezioni anticaduta industriali, oltre a vari

mercati specialistici come quello automobilistico o militare.

I prodotti ISC sono conformi agli standard internazionali fra cui CE

(Direttiva sui dispositivi di protezione individuale 686/89/CEE), ANSI Z359 e NFPA 1983 e vengono realizzati in conformità al sistema di

gestione della qualità ISO9001/2008, verificato e certificato da SGS.

Benvenuti al catalogo prodotti ISC

Contents

About Us

Descenders

D2 Escape Descender Kits

D4 Work Rescue Descender

A-B Descender/Pro Allp Decsnder Figure 8 & Fiqure 9 Descenders

Edge Protection

Back-up & Ropegrab Devices

REDtm Back-up Device

Ropegrabs & Rockertm

Hand Ascenders

Anchors & Accessories

Girder Grips/Dyvdag Anchors Wire Anchor Strops

Rigging Plates

Climbtechtm Portable Anchors Deadweight Portable Anchors

Deadweight Trolley

A-Frame

Tripod Systems

Tripods

Accessories/Brackets Winch

Arachnipod Edge Management System Slix100tm Stretcher

Fall Arrest Blocks

Progress Capture Pulleys

R-ALFtm & LH-ALFtm Auto-locking Pulleys

ALFtm Climb Assist Pulley

SmartSnaptm Continuous Attachment Device

Zipspeed Tandem Trolleys

Pulleys

Shear Reduction/Top Roping

Eiger Lightweight Heavy-duty Prussiks

Cast Rigging Pulleys

PortaWraps

Singing Tree Rope Wrench

Karabiners

Aluminium

Steel

Stainless Steel

Snaphooks Tactical/Military Products

Buckles & Components

Quick Release Buckles (QRBs)

Terms & Conditions www.iscwales.com

12

13

14

18

27

37

45

10

20

29

21

24

22

25

26

30

36

38

43

44

4

6

16

48

50

Our engineers use the latest state of the art software, hardware, and systems through the entire product life cycle. This is all

Universities giving us access to the latest thinking, materials

apprenticeships.

Our highly skilled manufacturing department is where our innovative product ideas are transformed from raw material to finished goods, within our 25,000 ft2 facility in North Wales.

advanced

grows, and as we continue to increase the level of technology within our products.

Manufacturing Facilities Engineering & Design

Our philosophy here at ISC is to provide our customers with the best products possible. To achieve this we actively consult with and listen to our customers’ ideas, feedback and expectations. This valuable information is then fed in to our new product development process. Feedback about existing products helps to drive our process of continuous product improvement.

demanding environments in which they are used.

Our quality system is regularly

audited by external auditors SGS

UK Ltd and is certified to

ISO9001:2008.

Design, Prototype, Manufacture & Testing

Using the latest Solidworks™ 3D Computer Aided Design (CAD) software provides us with a complete design and virtual

enables our engineers to interact in virtual reality with the products to visualise, test, and optimise the design.

To complement our design abilities we have advanced in house prototyping facilities. These include both manual and Computer

machines are networked to our MasterCAM X™ Computer Aided Machining (CAM) software which allows rapid programming of machinery to produce complex 3D surfaces and shapes. The

accurately and repeatedly reproduce our designs in any metal or plastic material required.

relevant national and international standards, as well as our own rigorous standards. At ISC we believe that it is vital that every piece of safety

critical equipment that we ship has been thoroughly tested

and inspected by highly competent people, reassuring the

user that each and every component has been handled by a

real person to ensure that it meets the highest standards.

Testing & Quality Control Software & Prototyping

Image extracted from Solidworks 3D Model of the ISC D4 Descender – see page 7 for product details

05

controlled. Either side of the sweet spot there is an auto-lock function -when the user lets go of the handle it automatically stops and when the user pulls the handle too hard it automatically stops (often referred to as a ‘panic-stop’).

Escape Descender

Aramid fibres (such as Technora)

are perfect for use in applications

where fire is the main hazard

(such as bail-out or evacuation from wind turbines).

Kit Options

Standard Polyester ropes are ideal

for use in other areas (such as

Linesman

elevating work platforms/

skylifts).

Ployester Rope

Technora Rope

Technical Information

Code Rope Rope

(g/m) (oz/ft)

Rated Load

(kg) (lb)

KT860A Polyester

KT860B Technora

(g)

(oz)

Kit Weight (excluding Rope)

493 17

493 17

45

46

0.5

0.6

100

100

220

220

DESCEND

PANIC BRAKE

STOP & RESET

Indicator Arrow

Features & Applications

Our engineers developed a new handle operated cam system specifically so that in a panic situation the Descender would actually stop the descent, rather than just slow it down– the D2 Descender is the only Micro-Descender in the world to offer this function.

using the thumb) which allows the user to smoothly feed the rope through the device, without the use of the handle. The cam feed feature is particularly useful for fast Bail-out or for work positioning during roof work for example.

emergency hauling (when used as part of a 2:1 ‘Z-rig’).

manufacturers have even integrated it into a harness back-pack so that self-rescue can be made easy.

Photo courtesy of ClimbTech, USA

Work Rescue Descender


Weight > Rated Load >

Rope > Standards >

655g (23oz) 240kg (551lb) 10.5-11.5mm (3/8-7/16”) EN12841, NFPA, ANSI

RP880 D4 Descender

The NEW D4 Descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is a double-stop device with an auto-lock function which is activated whenever the operator lets go of the handle. The panic brake will only lock out when in free-fall, meaning that the panic brake is not overly sensitive in normal use.

The D4 cam is made from solid Stainless Steel and is very wear and corrosion resistant. The device has an in-built wear indicator. The D4 Descender cams are replaceable (by competent trained personnel), potentially giving the D4 a longer in-use life.

device has a double stop mechanism, as although

PANIC BRAKE

DESCEND

RESET

PRIMED

The D4 Descender also has a double safety locking mechanism,

rotated open due to the positioning of the Karabiner and as an

additional safety feature the D4 has been designed with a push button ‘click-lock’ safety closure. The D4 is easy to attach/

detach from rope without detaching from operators harness,

device.

The D4 is suitable for rescue as it has a rated load of 240kg and is suitable for use with 10.5-11.5mm (7/16”) Low Stretch ropes (EN1891).

07

Push-button &

location hole

Descenders (continued)

The A-B Descender is a ’squeeze style’ device, designed for use in Technical Rope Access, Intervention/Special Forces and is rated for two-person rescue loads.

activated when the user pulls too hard on the handle and/or if the user lets go of the handle.

Features & Applications Features & Applications

Pro ALLP A-B Descender

The Pro ALLP is rated for a two-person load and is suitable for use in rescue applications.

controlled descent, or screw-controlled descent adjustment. The screw control allows for precise adjustment and can also

descent has been achieved, the Auto-lock function can be activated, putting the Descender in to ‘cruise control’.

extended, spring-loaded flip down handle

which gives extra leverage when a finer

degree of descent control is required.

The flip down handle is of particular use

for extra control of a two-person rescue

load.

Main Control Lever

Screw Control For precise adjustment

and cruise control

RP810

RP400


Code Rope Ø

(mm) (inch)

RP810 A-B Descender

RP400 Pro Allp

(g)

(oz)

Weight

449 16

589 21

10.5-11

10.5-12.7

3/8-7/16

3/8-1/2

Photo courtesy of TOPROPE, Switzerland

Figure 8 & 9s


RP120 RP110

RP101

RP100

RP130

protecting ropes from wear. Each Edge Roller box has base rollers and side rollers, to protect the rope from edge wear and lateral movement.

ER100

Edge Roller boxes are sold separately and

boxes can be added or removed to suit

the terrain of each application.

RP110

RP100

RP101

RP120

Figure 8

RP130

Figure 9

(kN)

MBS

(lbf)

25

35

80

25

5620

7868

17985

5620

30 6744

- -

(oz) (g)

112

196

600

56

200

445

4

7

21

2

7

16 ER100

Edge Protection

(inch)

5/16-1/2

5/16-5/8

5/16-1/2

5/16-1/2

5/16-1/2

3/16- 5/16


Standard

Rescue (Aluminium)

Rescue (Stainless)

Micro 8

Figure 9

Edge Roller (1 unit)

Weight Rope Ø Type Code

(mm)

9-13

8-16

8-13

9-13

9-13

5-7

locking.

The Figure 9 device performs in a similar way to the Rescue 8, but has the extra benefit of an anti-twist attachment point. The attachment hole has

09

Edge Protection

Back-up Device

RED Device

in locked

position

Poppertm Cord

provides a secondary attachment point for the tow cord.

Poppertm clip releases under the force. The RED is designed for use with an 800mm dynamic cowstail,

(shock absorber not required).

The RED makes use of ‘Rotational Braking’ which means that the device

rotates clockwise creating friction and resistance, which then results in

very effective automatic braking in the

breakaway tow-cord.

RP891 Fixed RP892 Popper


Approved Ropes

The RED should be used with Low Stretch 10.5—11.0mm (3/8-7/16”) ropes (EN1891) only.

(g) (oz)

221

222

224

8

8

8

Rope Ø

3/8-7/16

3/8-7/16

3/8-7/16

10.5-11

10.5-11

10.5-11

(mm) (inch)

Code

RP890

RP891

RP892

No cord

Fixed cord

Poppertm cord

Type Weight

Rotational Braking

Karabiner Attachment

Loop retains device in

case of accidental dropping

Ropegrabs

Rocker

Thumb-catch

Allows the Rockertm to be

‘parked’ on the rope at any position, for work positioning

The Rockertm can be fitted to the rope at any point and can be

Rockertm is designed for use without a shock-absorber and can

accordance with EN358).

Ropegrabs

Features & Applications Features & Applications

ISC Ropegrabs have non-aggressive cam profiles to help prevent rope wear.

RP500

RP203

RP209

RP204

RP205

removable (Pip Pin) axles. The Pip Pin axle is quick and easy to fit/release and can be fitted to the rope at any point, without detatching from the user’s harness.

ISC Ropegrabs can be used on work positioning lanyard/fliplines.


Type

Fixed Axle Ropegrabs

Rocker

Small

Large

Small

Large

168 6

(g)

Weight

(oz)

177

300

6

11

180

302

6

11

3/8-1/2 10.5-12.7

Rope Ø

(mm) (inch)

3/8-1/2

9/16-5/8

10.5-13

14-16

10.5-13

14-16

Removable Pip Pin Ropegrabs

RP203

RP204

RP209

RP205

Code

RP500

3/8-1/2

9/16-5/8

11

Hand Ascenders

Aluminium extrusion and are suitable for heavy-duty use.


5/16-1/2

5/16-1/2

9-13

9-13

5/16-1/2

5/16-1/2

9-13

9-13

364

364

13

13

13

13

367

367

Professional

RP210

RP220

RP230

RP240

Left Handed

Right Handed

Left Handed

Right Handed

Ultrasafe

Rope Ø

(mm) (inch)

Weight

(oz) (g)

Code Type


Coned Cam Profile For minimal rope wear

Ultrasafe Cam Pin For improved rope retention

RP210

RP220

RP240 RP230

ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Hand Ascenders have both primary and secondary attachment holes.

accidentally pulled out between the cam and the body.

ISC Professional and Ultrasafe Hand Ascenders have moulded

versions.

Photo courtesy of DIRA Group, Netherlands

Anchors & Accessories

Girder Grip & Concrete Anchors are made from high strength materials & can be used in vertical or horizontal plane. Girder/Concrete Anchors & Strops are Approved to CE EN 795. ISC Rigging Plates are made from high strength Aluminium and have 20mm (3/4”) holes, to allow Karabiners to be fully rotated.


anchorage solution which can be used in the vertical or horizontal plane. These anchors are operated by using two fingers to pull back the red collar. This action retracts the retention bar, allowing the device to be inserted in to the anchor hole. Once the device is in position, the red collar can be released, causing the retention bar to engage, fixing the device in the anchor hole.

ISC Wire Strops are manufactured from Galvanised Steel, fitted with Thimble eyes and a protective PVC cover. They are available irequest).

RP310

RP320

RP300

WSX00 Range

GG201 GG101

13


(kN)

MBS

(lbf)

28

28

28

6294

6294

6294

-

-

-

-

-

-

36

40

45

8093

8992

10116

Girder/Concrete Anchors

Code

GG101

GG201

GG301

WS100

WS150

WS200

RP300

RP310

RP320

Type

Small (Girder Grip)

Large (Concrete Anchor)

Medium (Pre-cast Anchor)

100cm (39”)

150cm (59”)

200cm (78”)

Small

Medium

Large

Rigging Plates

Weight

(oz) (g)

19

41

24

18

28

35

502

780

998

3

8

16

93

219

442

550

1160

680

Wire Strops- EN795 (other lengths available on request)

The Climbtechtm range is perfect for use in construction and demolition as well difficult access applications in rope access, rope rescue and even theatre rigging. The anchors can be used with a variety of work positioning, fall protection and rescue systems.

Toggle Lok Anchor The ClimbTechtm Toggle Lok Anchor is portable, reusable device which can be used as part of a flexible horizontal life line system (for up to two users) or as a direct anchorage connection (single user). The Toggle Lok can be used in precast concrete and on steel flanges and can be placed in horizontal, vertical and overhead surfaces. This Anchor should be placed in to a 20mm (3/4”) diameter hole.

CT104


Code MBS

(kN) (lbf)

WLL

(kg) (lb)

CT104

(g)

(oz)

Weight

181 6 22 5000 181 400

Removable Concrete Anchors

ClimbTechtm Concrete Anchors are portable, reusable devices

concrete substrate surfaces. Once a suitable hole has been

required. These anchors are available in two sizes/ratings and are suitable for use for fall protection applications.

CT103

CT102


Code MBS

(kN) (lbf)

WLL

(kg) (lb)

CT102

CT103

(g)

(oz)

Weight

181 6

181 6

22

44

5000

10000

140

140

310

310


Portable Anchors

Beam Trolley The ClimbTechtm Beam Trolley is a mobile anchor point, for use on structural beams. The device is fitted with toggle plates, which allow for simple adjustment of the rollers when installing/uninstalling the device. The Beam Trolley is ideal for use as an anchor connection for fall arrest systems (not suitable for material handling). No surface alteration (i.e. drilling) is required in order to use the Beam Trolley.

CT100


Code MBS

(kN) (lbf)

WLL

(kg) (lb)

CT100

(kg) (lb)

Weight

3.5 8 22 5000 140 310

CT101


Code MBS

(kN) (lbf)

WLL

(kg) (lb)

CT101

(kg) (lb)

Weight

1.5 3 22 5000 140 310

Beam Slider The ClimbTechtm I-Beam Slider is a lightweight, reusable anchor clamp which can be attached to a range of beam widths. The Beam Slider is quick and easy to fit/adjust and eliminates without surface alteration (i.e. drilling) and with no need of tools. Once mounted, the Beam Slider slides freely and easily along the beam in either direction.

CT106 (Steel)

CT105 (Concrete) Technical Information

Code Type MBS

(kN) (lbf)

WLL

(kg) (lb)

CT105 Concrete

CT106 Steel

(g)

(oz)

Weight (including bolt)

917 32

847 30

44

44

10000

10000

181

181

400

400

Concrete/Steel Swivel Anchor The ClimbTechtm Concrete MEGA Swivels rotates through

portable use for horizontal lifeline systems, tie-back, staging and rigging. The CT105 Concrete Anchor requires a minimum hole depth of 19mm (3/4”).

Distributed in Europe by ISC Please contact us for further information

15


141cm (55 1/2 inches) 570cm (22 1/2 inches) 540cm (21 1/4 inches) 7 (inc weights) 25kg (55lb) 178kg (392lb) 250 kg (551lb) EN795:97 Type B 2 Man 600mm (24 inches)

Height Length Width No. of Component Parts Max Component Weight Total Weight SWL CE Certified Rated Use Minimum Upstand Required

The Deadweight Trolley is a Portable Anchor Device for use behind Structural Handrails, Balustrades

and Parapet Walls*. The Deadweight Trolley is ideal for use where space is limited. The Deadweight

Trolley is quick and easy to set up, store and transport.

Images not shown to scale

* Requires minimum upstand of 600mm (24”)

DW100 Deadweight Trolley

Height Length Width No. of Component Parts Max Component Weight Total Weight SWL CE Certified Rated Use Minimum Upstand Required

215cm (84 5/8 inches) 193cm (76 inches) 142cm (56 inches) 18 (inc weights) 25kg (55lb) 390kg (860lb) 250 kg (551lb) EN795:97 Type B 2 Man 300mm (12 inches)


Deadweight Anchors

DW200 Images not shown to scale

The A-Frame Anchor is ideal for use on flat roof surfaces*. The A-Frame can be moved sideways as

required, therefore saving job time, by reducing the need for re-rigging. The A-Frame has locking

wheels, to prevent unwanted movement. The A-Frame easily breaks down in to 6 pieces (plus 12

weights), for easy transport and storage.

* Requires minimum upstand of 300mm (12”)

A-Frame

17

Service & Repair

We now offer Service Training courses for our Tripod Systems. These courses

take place at the ISC Factory in North

Wales,

Tripod Fall Arrest Blocks

Weight > WLL >

Fall Indicator > Gate Type >

Wire Diameter >

9kg (20lb) 136kg (300lb) As standard Twistlock

5mm (3/16”)

UB171 15m (50ft)

The UB171 Fall Arrest Block has a cast Aluminium housing, making this block suitable for heavy-duty use, even in harsh environmental conditions. The UB171 is fitted with a retrieval winch, which can be easily engaged in emergency situations.

ISC Tripod Heads are manufactured from Cast Aluminium for strength and durability. The standard version (TP143) is fitted with two pulley wheels and removable captive pins keep the

Tripod also has two swivel-eye anchor points.

The Tripod legs are adjusted by R-Clip pins, up to a maximum overall height of 255cm (approximately 89”).

ISC Tripods are ideal for work and rescue in confined spaces.

Attachment Bracket

GRB150S2

A hard wearing Tripod bracket, for use with the ISC Tripod, Block or Winch system. The GRB150 anti-slip bracket is quick and easy to fit, with a hinged lid and screw design.

The block is fitted with a Swivel-eye

Karabiner, which has a load-

indicator. In the event of a fall, the

swivel eye will pull out a short way, exposing a red collar.

We manufacture brackets to fit a range of Tripods– please contact

further information.

Winch

The Rescue Winch is for use in lifting & lowering applications. We manufacture a range of Tripod attachment brackets.

The RW020 Rescue Winch has a working length of 20m (65ft)

The Rescue Winch is fitted with a Steel Swivel eye, double-action Snaphook as standard.

RW020

*Fees apply

WLL > 140kg (308lb)

Weight > 10.2kg (22.5lb)

Tripods & Accessories

TP143 Tripod (accessories sold separately)

Weight > WLL >

Max. Height >

27kg (60lb) 350kg (771lb) 255cm (9ft)

Basic Dimensions

255

225

cm

inches

100

89

920

680

150

122

26

36

48

59

19

Distributed by ISC Please contact us for further information

Gin Pole A-Frame Side A-Frame

Bridge Tripod/Quadpod Handrail Recovery

THE WORLD’S MOST VERSATILE MODULAR

TOTAL EDGE MANAGEMENT SYSTEM

The Arachnipod Total Edge Management System is an innovative design that captures multi-functional capabilities. Simplicity and robust engineering provide the world’s most versatile modular, total edge management system. Components can be added or removed to achieve any of the 8 possible configurations.

The Arachnipod in its basic form is a Tripod. It consists of three basic telescoping legs, each pivotally connected to an Anodised Head.

connect together with a Quik-link Pin (similar to a hinge), which allows quick and simple addition or removal of legs, or bridge beam, to create different configurations.

Each head has a D-shaped shackle for guying to stabilise the structure. The Pulley Leg has an inbuilt Pulley, which is mounted on two Stainless Steel Roller Bearings. The Pulley is Stainless Steel and has two grooves– one to take up to 13mm (1/2”) rope and the other to take up to 8mm (5/16”) wire cable. Stainless detent pins prevent the rope or wire from coming out of the grooves.

Slix100tm Stretcher

Slixtm Stretcher

finished material allows easy slide manoeuvring of the stretcher. The Slixtm can be rolled up widthways or lengthways, for ease of transport and storage. The webbing straps do not pass underneath the stretcher body, keeping them safe from abrasive damage as the stretcher is dragged over surfaces. The Slixtm stretcher is fitted with several durable web handles, to allow accuracy

whilst manoeuvring. The lifting strap anchors are positioned for optimal balance and easy of use as the stretcher is hauler in a horizontal or vertical orientation. Under tension, the lifting straps cause the stretcher to mould around the casualty, for addition support & security.


SL100

93/42/EEC CLASS 1

Max User Weight Code

Width

(cm) (inches)

Length

(cm) (inches)

36 92 91 230

(kg)

400

(lb)

881

material allows easy slide manoeuvring of the stretcher. The Slixtm can be rolled up widthways or lengthways, for ease of transport and storage.

Slix 100tm Stretcher

21


Total Kit Weight (packed)> 12kg (27lb)

Service & Repair

Become an Approved ISC Block Service & Repair Agent...

We offer Fall Arrest Block Service Training courses, which take place at the ISC Factory in North Wales, or can be arranged at your own premises*.

*Fees apply

Fall Indicators

following a fall.

ISC Fall Arrest Blocks* are fitted with a specialist Karabiner, which indicates when a fall has taken place.

Indicator Ring is exposed to identify that an inspection is required.

* Choice of hook available on Merlin

Fall Arrest Blocks

ISC Fall Arrest Blocks conform to CE and ANSI Standards.

Basic Dimensions

Width Code Name Height Width Height

UB033

UB066

UB100

UB050

UB051

UB170

UB171

Merlin 3.3m (11ft)

Merlin 6.6m (20ft)

Merlin 10m (32ft)

Webbing 5m (16ft)

Wire 5m (16ft)

Wire 15m (50ft)

Wire 15m (50ft)

Retrieval

110

160

190

150

150

200

200

4 3/8

6 1/4

7 1/2

5 7/8

5 7/8

7 7/8

7 7/8

150

190

290

210

210

340

340

5 7/8

7 1/2

11 7/16

8 1/4

8 1/4

13 3/8

13 3/8

Standards

NEW Merlintm 10m (32ft) Block

(mm) (Inches)

NEW

MERLINtm

All ISC Blocks have solid Aluminium Housings, proven to last in all sorts of environments, from rental to off-shore. The internal mechanisms are simple, making them easily serviceable.

The NEW Merlintm 10m (32ft) is the first in the new, improved range. The Merlintm Fall Arrest Blocks are lightweight blocks, with durable cast Aluminium housings.

The UB100 Merlintm is fitted with a Steel Swivel-eye, load-indicating Karabiner as standard. The UB100 has a total weight of only 4.34kg (9.7lb).

Weight > WLL >

Fall Indicator >

3kg (7lb) 136kg (300lb) As standard

UB050 5m (16ft)

Weight > WLL >

Fall Indicator >

1kg (2lb) 136kg (300lb) Optional

UB033 3.3m (11ft)

Weight > WLL >

Fall Indicator >


UB171 15m (50ft)

Weight > WLL >

Fall Indicator >


UB051 5m (16ft)

Weight > WLL >

Fall Indicator >

2kg (5lb) 136kg (300lb) Optional

UB066 6.6m (22ft)

Choice of Hook

Available

Choice of Hook

Available

Fall Arrest Blocks

Weight > WLL >

Fall Indicator >


UB170 15m (50ft)

23

See pages 38-43 for

Karabiners & Snaphooks

See pages 38-43 for

Karabiners & Snaphooks

Progress Capture Pulleys

The latest range of ISC Progress Capture Pulleys (PCP) now feature a new lightweight centre plate, re-positioned wheel to reduce rope friction and a rated Becket, through which even an ANSI Karabiner can be fully rotated. All PCPs are fitted with tamper-proof rivets and are individually serial numbered. The cam-faces are coned (rather than spiked) to minimise rope wear.

Progress-capture Pulleys incorporate a cam which (when

lifting/pulling a load or tensioning a line. To lower/release the line the cam must be manually unclamped by using the flexible Dyneema release cord and held/pinned clear of the rope during the lower/release of the line.

One-way Locking Bearings

bearings (when roped correctly) will not turn, which means

operator much more control. Progress-capture pulleys can be used in all sorts of applications, such as hauling, tensioning & work positioning heavy loads.


Double Rescue Pulleys

Progress Capture Pulleys –Single

(kN)

MBS

(lbf)

40

30

8992

6744

40

30

8992

6744

40

30

8992

6744

Weight

(oz) (g)

23

23

660

649

23

24

663

672

32

32

905

900

Progress Capture Pulleys –Double

Type

Standard

One-way Bearings

Standard

One-way Bearings

Standard

One-way Bearings

Code

RP701

RP700

RP702

RP704

RP703

RP705


Coned Cam-face To minimise rope wear

4 : 1 Mechanical Advantage

System

RP700/701

RP702/704

RP703/705

R-ALFtm Rescue Auto Locking Pulley

The R-ALFtm has an over-speed brake built in so that it will automatically lock and hold when a fall occurs. The

pick-off kit or a 5:1 hauling kit –and whichever combination is used if the user ever loses control of the descent the over-speed brake will automatically kick-in.


limitation to ‘height of lift’ being rope stretch and/or kit weight.

The R-ALFtm can be used as part of a work suspension

themselves off by using a hand ascender and a short strop.

The unique design of the R-ALFtm means that an internal

capable of several thousand cycles and many arrests*.

The Standard R-ALFtm (RP431) locks in both directions. The LH-ALFtm Device (RP433) locks in one direction only and therefore the device will only lock to arrest a fall, leaving the user free to haul at higher speeds, without accidentally engaging the locking mechanism.

apply


MBS Weight

(kN) (lbf) (oz) (g)

Code Type

-

50

50

-

11240

11240

44

19

8

1243

526

235

RP431

RP064

RP065

R-ALF (WLL 250kg/550lb)

Double Prussik

Single Prussik

(Other Heights of Lift available on request) 2 : 1 LH-ALF Kit

KT431A2-010 10m H.O.L. (two-way locking)

KT433A1-010 10m H.O.L. (one-way locking -for Material Handling only)

(Other Heights of Lift available on request) 3 : 1 R-ALF Kit

KT431A1-010 10m H.O.L (two-way locking)

(Other Heights of Lift available on request) 5 : 1 R-ALF Kit

The above kits are supplied with Rope to allow for 10m / 32ft Height of Lift (other HOL available), Ropebag & Instructions

Standard Kit Contents

5 : 1 Kit

3 : 1 Kit

Components 2 : 1 Kit

R-ALF Hauler (2 –way Locking)

LH-ALF Hauler (1-way Locking)

Atlas Scaffold Anchor Connector

Medium Single Prussik (No Becket)

Medium Single Prussik (Becket)

Medium Double Prussik (Becket)

Professional Hand Ascender

0

1

1

1

0

0

0

1

0

1

0

2

0

2

1

0

1

0

0

2

2

RP431

25

ALFtm Climb Assist Pulley

The ALFtm is designed for climbing vertical structures such as ladders and is ideal for use in Ropes Courses. Fall distance is limited to a few centimetres.

be incapacitated, but if this happens a rescue can easily be organised from ground level, unlike the majority of fall

arrest devices where a rescuer must climb up (therefore putting himself at risk) to make the rescue.

View the ALFtm Demo Video:

www.youtube.com/iscmarketing

How it Works

locking system, which combines a speed sensitive inertia locking brake system, with a grooved pulley wheel. At low speed (during normal use), the rope runs freely through the pulley. In the event of a fall, the rope speed increases causing the inertia brake to kick in, to promptly arrest the fall. Fall distances are extremely short, so in most cases the fallen user can regain their grip on the structure and resume their climb, without the need for assistance/instruction.

The ALFtm Pulley is a two-way locking device which can be rigged in a continuous loop system with Alpine Butterfly attachment loops at opposing ends of the system. This

always an attachment loop present, allowing the next user to immediately commence their climb/descent.

Applications

The ALFtm Climb Assist Pulley was developed with users in

mechanical method of protecting multiple climbers en route around a ropes course. The ALFtm provides a simple, cost effective solution, which utilises industry standard (EN1891) low-stretch 11mm (7/16”) rope. The continuous

competent person.

The ALFtm Climb Assist Pulley can also be used as a solution

construction applications.

Alpine

Butterfly

Attachment

Loop, with Karabiner


(g)

Weight

(lb)

1330

463

3

1

MBS

-

15736

-

70

(kN) (lbf)

Code

RP430

RP066

ALF Climb Assist (WLL 140kg/310lb)

Large Single Prussik

Type

RP430

ALF Climb

Assist Pulley

RP066

Large Single

Prussik

Rigging

Photo courtesy of ZIPStream Aerial Adventure Parks

How it Works

KY005 Wire Key KY004 Ring Key

(g)

Weight

(oz)

316

130

36

36

11

5

1

1

MBS

5620

5620

N/A

N/A

25

25

N/A

N/A

(kN) (lbf)

Code

RP420

KY004A

KY005A

KY005B

SmartSnap

Ring Key

Wire Key [for 13mm (1/2”) Wire]

Wire Key [for 10mm (3/8”) Wire]

Type


Figure 1 Figure 2 Figure 3 Figure 5 Figure 4

SmartSnaptm is a self-belay system which allows a user to traverse all the individual elements of a course without ever being able to detach from the line. SmartSnaptm is really simple to use and therefore doesn’t require in depth user training; it is lightweight and is therefore perfectly suitable for children to use. The SmartSnaptm has been designed so that it can easily be retro-fitted to an existing course.

View the SmartSnap Demo Video: www.youtube.com/iscmarketing

“

” ”

We love the SmartSnap system because it embodies two critical

values that are central to our operating ethos; it provides 100% tie-

off security by disallowing unintentional disconnection from the belay

system, while also retaining participant involvement in the transfer process. It’s an ingenious product and is the standard belay system

we use for our brand of ZIPStream Aerial Adventure Parks.

“ingenious” Don Stock, President

ZIPStream® Aerial Adventures

“ “user friendly”

William Moyle, Site Manager Bedale Aerial Extreme Ltd

Each course user wears a SmartSnap Device, attached to their harness by a short lanyard. At the beginning of the course, the

Supervisor attaches red gate of the SmartSnap to the wire [Figure 1] and locks the gate, using the wire-mounted key [Figure 2].

The user then travels to the next change-over point, where they clip the blue gate on to the Ring Key lanyard [Figure 3]. The

user then inserts the spike of the Ring Key in to a hole [Figure 4]. This action simultaneously locks the Blue gate AND unlocks

the Red gate [Figure 5], releasing the user from the previous element, and allowing them to safely attach to the next element.

upgrade its safety system without the need for an expensive

course re-design and re-fit. The user friendly SmartSnap has meant

that we are now able to allow children as young as 6 year old on the course.

27

Special Projects

Visitors to the Zipworld attraction take flight on the ‘Little Zipper’ 450m (1476ft) long Zipline and the ‘Big Zipper’, the 1750m (5741ft) long Zipline which plunges down over the quarry from the 213m (700ft) high summit!

When approached to manufacture a Zip Trolley worthy of the task, we got straight on to it...

Wayne Ellis, ISC Commercial Director

The Brief

The Snowdonia National Park in North Wales was to become home to the UK's Heart of Adventure

A Zipline this big and this fast needed a trolley

serious work went into the Zipline construction,

harness.

ZipWorld has two Zip lines on site in Penrhyn Quarry. The ‘Little Zipper’ is a 450m (1476ft) long line, but the main attraction for the adrenaline hungry thrillseekers is the 1750m (5741ft) ‘Big Zipper’! Those brave enough to take on the Big Zipper will fly down the quarry at speeds in excess of 75mph (110kph)!

ZipWorld site- Penrhyn Quarry, North Wales

To achieve this kind of speed, a very special Zipline Trolley was needed. The ZipWorld Trolleys needed to be big, but not too heavy. The trolleys

environmental conditions. Each trolley is fitted with top grade wheel bearings, which are capable of running at high speeds and perform consistently within a wide range of temperatures. The wheels are made from a special material, which is capable of tens of thousands of zip miles, without causing undue wear to the cable. The wheels also offer a low decibel output during the flight.

[Right] The Zipworld Trolley, manufactured by ISC

Kevin Thomas, ISC Goods Inwards Coordinator

Adam Davies, ISC Customer Service Denny Moorhouse, ISC Chairman

Zipspeed Tandem Trolleys

The NEW ISC Zipspeed Tandems represent industry leading Zipline Trolley innovation at its most affordable! The design of these mid-size trolleys uses state of the art engineering techniques to ensure that they run and run. Lightweight but tough, they offer several unique features. The new trolleys have been trialled and are in use at several major parks around the world. These are possibly the fastest, strongest & most durable Zipline Trolleys in

their class.

Weight

(oz)

876

874

875

31

31

31

(g)


(kN)

MBS

(lbf)

40

40

40

8992

8992

8992

Axle Colour

40

40

40

8992

8992

8992

63

63

63

1796

1794

1789

RP075A

RP075B

RP075C

13mm (1/2”) Wire

16mm (5/8”) Wire

20mm (3/4”) Wire

50mm (2”) Diameter Wheels

Code Type

RP076A

RP076B

RP076C

13mm (1/2”) Wire

16mm (5/8”) Wire

20mm (3/4”) Wire

75mm (3”) Diameter Wheels


[Top Elevation]

Zipspeed Trolleys are fitted with special Rubber-sealed, Deep Groove Ball Bearings as standard. These Bearings have been chosen for optimal high speed, low friction performance. The rubber seals retain the grease lubricant, whilst defending the Bearings from moisture and contaminants; giving the Zipspeed a lifespan of several thousand miles/kilometres.

The Zipspeed Trolleys are fitted with a rubber brake-buffer* to absorb impact load at the end of the run and have several attachment hole options, including an extra

Karabiners and Snaphooks. The rear attachment hole can be used to attach a secondary lanyard and the small central hole can be use to attach an accessory bar/handle.

*Replaceable wear item

Zipspeed Trolleys are available with 50mm (2”) or 75mm (3”) Diameter wheels, to suit lines of varying tension, gradient & speeds.

We also offer versions to suit 13mm (1/2”), 16mm (5/8”) or 20mm (3/4”) Wires and each Trolley is fitted with a colour coded collar for quick, easy identification.

Options

optimal high speed, low friction performance.

Colour-coded

identification collar

RP075 RP076

29

Shear Reduction/Top Roping

RP029 Fixed Wheel Shear Reduction

Block


The RP029 Shear Reduction Pulley is made from Stainless Steel and fitted with a top bollard attachment point. The wheel of this pulley does not rotate, giving maximum friction.

control when used in lowering applications, such as top roping in Climbing Walls/Gyms and Ropes Courses.

Single Prussik Pulleys, in Aluminium and Stainless Steel. See pages 32 & 33 for further information.

Shear Reduction Pulley

RP029

Fixed Wheel Shear Reduction

820

29

13

1/2

45

10116

Stainless Steel


Code Weight

(g) (oz)

MBS

(kN) (lbf)

Wheel Material

(mm) (Inches)

Max Rope Ø

RP012 Small Single RP030 Small Double RP031 Double Re-direct RP032 Medium Single

RP033 Medium Double RP034 Medium Single RP037 Micro (rated bridge)

RP037C Micro Stainless Steel

31


Code

RP012

RP030

RP031

RP032

RP033

RP034

RP037

RP037C

Small Single

Small Double

Double Re-direct

Medium Single

Medium Double

Medium Single (Double Ended)

Micro Pulley (12kN Rated Bridge)

Micro Pulley (Stainless Steel)

Eiger Pulleys

13

13

13

13

13

13

13

13

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

Weight

(g) (oz)

87

150

126

158

284

181

90

174

3

6

5

6

10

6

3

6

MBS

(kN)

36

35

30

36

36

36

28

40

(lbf)

8093

7868

6744

8093

8093

8093

6295

8992

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Stainless Steel

Wheel Material

(mm) (Inches)

Max Rope Ø

ISC lightweight Eiger Pulleys are made from high strength Pulleys are fitted with Bushings, which are ideal in lightweight applications.

Eiger Lightweight Pulleys

Pulleys– Heavy Duty Prussiks

All Pulleys in our latest Prussik range have tamper-proof Rivets, in compliance with CE EN12278 (2007)

Reduction versions are available on request*.

40

40

50

50

50

70

70

70

8992

8992

11240

11240

11240

15736

15736

15736

13

13

13

13

13

16

16

19

1/2

1/2

1/2

1/2

1/2

5/8

5/8

3/4

Weight

200

340

280

500

215

463

760

440

7

12

10

18

8

17

27

16

(g) (oz)

MBS

(kN) (lbf)

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

Aluminium

NO

YES

NO

YES

YES

NO

YES

NO

RP060

RP061

RP063

RP064

RP065

RP066

RP067

RP069

Small Single

Small Double

Medium Single

Medium Double

Single with Becket

Large Single

Large Double

Extra Large Single

Part Becket Wheel Material

Aluminium


Max Rope Ø

(mm) (Inches)

Bushings Ideal for high loads

at low speed

Roller Bearings Ideal for low loads

at high speed

RP060

RP061

RP063

RP064

RP065

RP066

RP067

Part

Stainless Steel


13

13

13

13

13

16

16

1/2

1/2

1/2

1/2

1/2

5/8

5/8

NO

YES

NO

YES

YES

NO

YES

Small Single

Small Double

Medium Single

Medium Double

Single with Becket

Large Single

Large Double

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

Weight

372

674

584

1036

413

896

1626

14

24

21

37

15

32

58

(g) (oz)

MBS

40

40

50

50

50

50

50

(kN)

8992

8992

11240

11240

11240

11240

11240

(lbf)

Becket Wheel Material Max Rope Ø

(mm) (Inches)

33

indentify the correct Block for the task. We have introduced a new fixed bollard dimension, which allows the user to fall in-line with rigging standard practice, whereby the Anchor/Topping Strop should be twice the strength of the Working Line.

Rounded Plates Markings Plate Wider Profile

Features

Cast Rigging Pulleys

Accommodates larger Topping Strops

Quick, easy Pulley identification

Smooth edges minimise rope wear

RP050

RP051

RP054

RP055

RP056

RP057

2000

2000

3000

3000

2000

4000

4400

4400

6600

6600

4400

8800

13

16

16

19

16

19

1/2

5/8

5/8

3/4

5/8

3/4

4500

7720

7720

10630

7720

10630

9900

17000

17000

24000

17000

24000

19

25

25

29

25

29

3/4

1

1

1 1/8

1

1 1/8

10630

17180

17180

21270

17180

21270

24000

37800

37800

46800

37800

46800


Part Code

Side Cheeks

Pulley Wheel

Working Line Topping Strop WLL

(kg) (lb)

Size

(mm) (Inches)

MBS

(kg) (lbf)

Size

(mm) (Inches)

MBS

(kg) (lbf)

Unit Weight

(kg) (lb)

1.8

1.8

2.5

2.5

1.6

3.8

3.5

3.5

5

5

3.5

8.5

Chamfered Pin Head

For quick, easy location of the Spring-lock Pin

RP056 Flame RP054 RP050

RP057 RP055 RP051

TRIED, TESTED...

35

Portawraps

ISC Portawraps are designed for lowering loads of up to 1000kg, with consistent friction for total control. ISC Portawraps have main and secondary attachment points , to offer extra stability of the device against the tree.

giving a bend ratio of approximately 3.5 : 1 and can be used with ropes of up to 13mm (1/2”), to lower loads of up to 750kg (1653lb).

The large Portawrap (AE160) has a 75mm (3”) diameter, giving a bend ratio of approximately 4.5 : 1 and can be used with rope of up to 16mm

captive attachment points, where Karabiners can be attached around the working line, to keep the working line in place.

Application & Features

Weight > SWL >

Max Rope >

2.7kg (6lb) 1000kg (2200lb) 16mm (5/8”)

AE160 Large

Weight > SWL >

Max Rope >

2.3kg (5lb) 750kg (1653lb) 13mm (1/2”)

AE150 Small

NOTE: The STRW is not for primary life support. The hitch provides the

primary life support.

The smaller, lighter design works well with the stiff tether, which keeps the STRW away from the hitch. The ZK-2 Rope

of a Pulley wheel keeps the rope round, so there’s less rope flattening than with the ZK-1 version.

ZK-2 New Features

The Rope Wrench is a unique and innovative device, designed by Kevin Bingham of Singing Tree. The STRW allows so many more options for safe movement in the tree

friction control than that achieved using double rope. The STRW allows far greater flexibility and opens up a wide range of new working possibilities. In double rope climbing, friction levels never remain constant due to rope running over limbs, re-directs and Pulleys. The STRW

technique). The STRW also allows the user to easily pass any limbs which obstruct their route- it is possible to pass obstructions when using DRT, but it can be a very tricky manoeuvre!

How it works

Rope Wrench

The Singing Tree Rope Wrench (STRW) creates a “bend” above the climbers hitch on the single line which, with the addition of the tether to connect to the STRW, creates a “contained doubled rope

the tree allowing for a level of consistency of friction on the hitch which is impossible to duplicate in doubled rope climbing.

The Singing Tree Rope Wrench (STRW) is manufactured and distributed by ISC

RP280

Kit Code KT280

126g (5oz)

RP281 Rope Wrench Pulley

(Parallel Sides)

37

Aluminium Karabiners

ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Aluminium Karabiners are of sleek ergonomic design, with a high strength to weight ratio.

Aluminium Karabiners

H W

P Captive Pin Available

Captive pins can be fitted to keep lanyard/webbing in place, to prevent unwanted rotation, therefore reducing the risk of side loading. Captive pins are supplied loose and can be easily fitted as necessary.

Options

F Fall Indicator Available

Swivel-eye Karabiners can be supplied with fall indicating rings. In the event

the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.

Colour Coded

ISC Aluminium Karabiners have colour-coded Barrels/Ferrules for quick, easy identification.

Basic Dimensions

Code

Name

KH214

KH204

KH411

KH453

KH452

KH451

KH301

KK215

KH255

Mini HMS

HMS

Luke

Gator

Gecko

Mongoose

Captive Eye

Link

Twister

74

78

70

65

75

88

75

61

72

(mm) (inch)

4

4 7/8

4 3/8

4 1/8

4 1/2

5 1/4

5 3/8

4 1/2

6 7/8

3

3 1/3

2 3/4

2 1/2

3

3 1/2

3

2 3/8

2 7/8

102

124

112

105

115

133

137

113

175

H W

Gate opening measurements are approximate, based on Supersafe Gates

Supersafe (triple-action)

Lift, turn, open

Quadlock (quad-action)

Turn, lift, turn, open

Blind Nose

ISC Performance Karabiners are forged with a blind nose, to prevent snagging.

B Blind Nose UNIQUE to ISC

Screwgate

Unscrew, open

Twistlock (double-action)

Turn, open

SSQ

TL

SS

SG

The KH453 Gator Bentgate is ideal for use as a Toolhook and

Restraints.

NOT for PPE

Bentgate Karabiners are NOT for use as PPE purposes and are marked accordingly.

SSQ

TL

SS

B

Weight > Gate Opening >

MBS >

80g (2.8oz) 20mm (3/4”) 25kN (5620lbf)

KH411 Luke Oval


MBS >

98g (3.5oz) 19mm (3/4”) 27kN (6070lbf)

KH214 Mini HMS


MBS >

103g (3.6oz) 22mm (7/8”) 27kN (6070lbf)

KH204 HMS


MBS >

118g (4.2oz) 24mm (1”) 30kN (6744lbf)

KH451 Mongoose


MBS >

47g (1.7oz) 15mm (5/8”) 25kN (5620lbf)

KH453 Gator


MBS >

86g (3oz) 21mm (7/8”) 30kN (6744lbf)

KH452 Gecko

Bentgate Karabiners


MBS >

46g (1.6oz) 22mm (7/8”) 25kN (5620lbf)

KH453BG Gator Bentgate

B


MBS >

88g (3.1oz) 30mm (1 1/8”) 25kN (5620lbf)

KH204BG HMS Bentgate

SSQ

TL

SS

SG B

SSQ

TL

SS

SG

SSQ

TL

SS

SG B

142g (5oz) 15mm (5/8”) 27kN (6070lbf)

KH255 Twister


MBS >


MBS >

99g (3.5oz) 20mm (3/4”) 30kN (6744lbf)

KH300 Captive Eye


MBS >

90g (3.2oz) 15mm (5/8”) 25kN (5620lbf)

KH215 Link

P

SSQ

TL

SS

SG B

F

B

SSQ

TL

SS

SG

SSQ

TL

SS

SG B

SSQ

TL

SS

SG B B

B

39

P

Steel & Stainless Steel Karabiners

ISC Performance Karabiners are Forged for best build quality and feature a unique ‘Blind’ nose, which improves performance by reducing snagging. The Barrels have been designed with a square cut notch to limit debris build up. ISC Steel Karabiners are of sleek ergonomic design, with a high strength to weight ratio.

Basic Dimensions

Code Name

KH219

KH455

KH212

KH202

KH311

KH200

KH260

KK308

KH301

KH307

KH415

KH305

KK400

KH407

Iron Wizard (S)

Big Dan

HMS

Klettersteig

Oval

Offset D

Twister

D Shape

Captive Eye (S)

Firemans

Iron Wizard (L)

Captive Eye (L)

Atlas

Scaffold

4 7/8

5 3/8

5

4 7/8

4 1/8

4 1/2

6 7/8

4 1/8

5 3/8

6 7/8

7

7 3/8

7 7/8

9 1/2

125

137

127

125

106

113

175

105

136

173

180

188

200

240

72

86

80

85

58

63

75

55

76

95

102

107

145

135

2 7/8

3 3/8

3 1/8

3 3/8

2 1/4

2 1/2

3

2 1/8

3

3 3/4

4

4 1/4

5 3/4

5 3/8

(mm) (inch)

H W H W Twistlock (double-action)

Turn, open

Screwgate

Unscrew, open

Supersafe (triple-action)

Lift, turn, open

Quadlock (quad-action)

Turn, lift, turn, open

Options


Swivel-eye Karabiners can be supplied with fall indicating rings. In the event

the user that a fall has taken place. This is particularly useful when hooks are fitted to devices which must be inspected/serviced following a fall.

P Captive Pin Available

(supplied loose)


When a fall occurs, a

red indicator ring is

exposed

B

ANSI Compliant

(3600lb) Barrels

available

Gate Options

Gate opening measurements are approximate, based on Supersafe Gates

Nose Types

K

Blind (Non-Snag) noses as standard

Choice of Standard Hook nose or Keelock Non-snag nose


MBS >

264g (9.3oz) 28mm (1 1/8”) 70kN (15736lbf)

KH219 Iron Wizard (Small)


MBS >

365g (12.9oz) 27mm (1 1/8”) 50kN (11240lbf)

KH455 Big Dan


MBS >

276g (9.7oz) 23mm (7/8”) 50kN (11240lbf)

KH212 HMS

SSQ

TL

SS

SG

SSQ

TL

SS

SG

SSQ

TL

SS

SG

P

B B

Side opening


MBS >

250g (8.8oz) 26mm (1”) 50kN (11240lbf)

KH202


MBS >

188g (6.7oz) 18mm (3/4”) 25kN (5620lbf)

KH311 Oval


MBS >

255g (9oz) 20mm (3/4”) 50kN (11240lbf)

KH200

TL

SS

SG

TL

SS

SG

TL

SS

SG

P P

B


MBS >

175g (6.2oz) 17mm (5/8”) 35kN (7868lbf)

KH308


MBS >

261g (9.2oz) 18mm (3/4”) 50kN (11240lbf)

KH301 Captive Eye KH260 Twister


MBS >

348g (12oz) 18mm (3/4”) 40kN (8992lbf)

SSQ

TL

SS

SG

TL

SS

SG

SSQ

TL

SS

SG

B

F

B

41

K

K

K

K


MBS >

400g (14.1oz) 48mm (1 7/8”) 40kN (8992lbf)

KH307 Firemans


MBS >

540g (19oz) 33mm (1 1/4”) 70kN (15736lbf)

KH415 Iron Wizard (Large)


MBS >

395g (14oz) 45mm (1 3/4”) 40kN (8992lbf)

KH305 Captive Eye (Large)


MBS >

816g (28.8oz) 57mm (2 1/4”) 45kN (10116lbf)

KH400 Atlas


MBS >

678g (23.9oz) 53mm (2 1/8”) 35kN

KH407 Scaffold Hook

TL

SS

SG

TL

Stainless Steel

TL

SS

SG

P

P

TL

SS

TL

SS

TL


MBS >

255g (9oz) 20mm (3/4”) 35kN (7868lbf)

KH200


MBS >

174g (6.1oz) 16mm (5/8”) 22kN (4946lbf)

KH308

TL

SS

SG


MBS >

286g (10oz) 27mm (1 1/8”) 50kN (11240lbf)

KH219 Wizard

TL

SS

TL

SS

SG

Side opening

P

P

B B

B P

Side opening


MBS >

400g (14.1oz) 48mm (1 7/8”) 40kN (8992lbf)

KH307 Firemans


MBS >

269g (9.5oz) 22mm (7/8”) 35kN (7868lbf)

KH202

TL

SS


MBS >

235g (8.3oz) 18mm (3/4”) 23kN (5171lbf)

KH250 Twister

TL

SS

SG

P F

B

P

Side opening

Snaphooks

Locking Nose

SH979

SH999

B

3

B SH903 SH901

F SH824 SH826

F

B

3

F

B SH904 SH905

30 6744 387 13 20 SH826 Double Action

(Fall indicating versions available )

3/4

Steel Snaphooks– Swivel

27 6070 287 10

7/8 21 SH824 Double Action

Standard

30

35

6744

7868

514

495

18

17

2 1/4

2 3/8

65

60

SH979

SH999

Double Action

Double Action, Locking Nose

Large Scaffold Snaphooks– Aluminium

7/8

7/8

1

23

23

26

(kN)

(lbf)

27

27

27

6070

6070

6070

MBS Weight Gate Opening

Code Type

(oz) (g)

4.4

4.5

11.5

125

128

319

(mm) (inch)

SH901

SH903

SH901P

Double Action

Triple Action

Double Action

Standard Snaphooks– Aluminium

27

27

6070

6070

191

200

7.0

7.2

7/8

7/8

22

22

SH904

SH905

Double Action

Triple Action

Swivel Snaphooks– Aluminium (Fall indicating versions available)


43

F

NEW Stainless Steel version Also available with triple-action gate

3

Small Aluminium Snaphooks are available with the

increased gate security.

supplied with fall

indicating rings. In the event of a fall, the red ring is

exposed, altering the user that a fall has taken place.

B SH901P

Triple-action Gate

Images not shown to scale

Tactical Finishes

Ascent and Descent devices. Our range caters for Special Forces Black Tactical, Military and NATO operations.

Specialist finishes are available across a range of products including Karabiners, Pulleys & specialist devices. Please contact us to discuss your requirements.

RP120 Micro Figure 8

Matt Black Sand Olive Drab

45

BU182

BU180

BU183

BU184

BU185

Supplied with Tang & 3 Bar Slide -20kN (4496lbf)

Code Weight

(oz) (g)

4.9

4.4

138

124

4.3

3.9

3.3

122

108

94

8.7 248

BU180

BU183

BU182

BU184

BU185

BU190

Buckle Size

45

25

1 3/4

1

(mm) (inch)

45

25

25

1 3/4

1

1

Tang Size

45

45

1 3/4

1 3/4

(mm) (inch)

45

45

25

1 3/4

1 3/4

1

45 1 3/4 45 1 3/4

Supplied with Tang & 3 Bar Slide– 20kN (4496lbf) (Stainless Steel)

Supplied with Sliding Bar Tang -16kN (3597lbf)


Klick-lock Buckles

We manufacture a wide range of Buckles & Fittings. If you are looking for a Buckle/Fitting which is not shown, please contact a member of our Customer Services Team.

Black versions also available NEW Stainless Steel version

BU190

Buckles & Fittings

BU170

BU173

Chest Ascender

designed for use on a full body harness, and therefore it is ideal for use in Rope Access work.

The cam is spring-loaded and fitted with a catch mechanism, to allow for easy one-handed operation of the device whilst attaching/removing the device to/from the rope.

Suitable for use on 9-13mm (5/16-1/2”) Rope.

The Chest Ascender has an increased grip at low load, even on wet, greasy/oily ropes. The spikes are angled downwards, giving maximum grip, whilst allowing the cam to slide easily up the rope.

RP229

Adjuster Buckles

Weight

(oz) (g)


Web Adjuster Buckles

2.1

4.0

3.5

2.3

60

112

100

65

Size

(mm) (inch)

1 3/4

3

3

1 3/4

45

75

75

45

BU171 Aluminium

BU173 Steel

BU174 Steel

Code

BU171

BU174

BU102/106 BL121/122 BU102G BU121E

BU200 BU101 AP184

SH101 DD302 BD304

BD307 BD600D BD600C

RIN0012

RIN0013

RIN0010

RIN0011


Code Weight

(oz) (g)

Size

(mm) (inch)

3 Bar Slides– Stainless Steel

Square Links– Stainless Steel

BU102

BU106

BL121

BL122

1

1.4

30

40

1.2

1.6

34

45

45

50

1 3/4

2

45

50

1 3/4

2

3 Bar Slides– Steel (*Heavy-duty)

BU200*

BU101*

1

1.6

3.4

30

46

102

1 3/4

2

3

45

50

75

AP184 1.7 48

Sliding 3 Bar– Steel

45 1 3/4

Square Links– Steel

BL121E 1.2 35 45 1 3/4

Compact Hook

SH101 2.8 78 50 2

Pressed Delta

BD302 2.5

72

45

1 3/4

D-Ring– Steel

2.7 76 2 50

D-Ring with Leg– Stainless Steel

3.0 86 2 50

D-Rings– Aluminium

BD600D Flat

2.9

2.9

82

82

1 3/4

1 3/4

45

45

Aluminium Rings– 25kN MBS

RIN0011 Large

1.3

1.9

38

54

-

-

-

-

Steel Rings– 70kN MBS

RIN0013 Large

4.1

5.9

118

166

-

-

-

-

Ring Dimensions:

Small Ring:

ID= 27mm (1 1/8”)

OD= 51mm (2”)

Large Ring:

ID= 45mm (1 3/4”)

OD= 70mm (2 3/4”)

ID= Internal Diameter OD= Outside Diameter

47

Quick Release Buckles (QRB)

We manufacture a wide range of Quick Release Buckles for the Motor Racing Industry, to suit FIA/SFI standards requirements.

Photos courtesy of Corbeau Seats/Luke Racing

Body Type

Lids

QRBs fitted with a Rotary mechanism release their tangs as soon as the user begins to rotate the lid. With the

Motion helps to prevent accidental opening.

Buckle Opening

Specialist Models

We also manufacture a Stainless Steel QRB. This QRB is ideal for use in off-shore & Helicopter SAR use.

Positioning

QRBs can be supplied with a fixed tang in any position, to allow for driver preference.

ISC Tangs are stamped and have ergonomic, rounded edges. Standard Tangs are available in flat, or 20o cranked versions. Standard Tangs are available with a Silver or Black finish. Long Moustache Tangs are also available.

AP154C Cranked, Black AP154A Cranked, Silver

Tangs

AP153 Moustache Tang, Silver

AP150A Flat, Silver AP150B Flat, Black

QR171 Full Lug Lid (FIA) QRB Streamline, Lost Motion Mechanism (Parking)

QR173 Half Lug Lid (SFI) QRB Streamline, Lost Motion Mechanism (Parking)

QR153 Machined Lid QRB Standard, Rotary Mechanism (Parking)

QR174 QRB Streamline, Lost Motion Mechanism (Non-Parking)

49

1. Incorporation of Conditions of Sale

sold by the seller subject to these

stipulated

or referred to by the buyer, whether in the order or in any document

conditions of sale are the only terms or conditions upon which the

seller sells or supplies the goods.

2. Payment

I) Where credit terms apply, payment is due within 30 days of the

date of the seller’s invoice to the buyer.

II) If any payments due to the seller are not made on the due date the

seller reserves the right to suspend any or all the deliveries of goods

ordered by the buyer and/or by notice in writing to the buyer to cancel

the contract without being liable for the consequential loss.

III) The seller reserves the right to charge the buyer interest on any

sum outstanding beyond the period of credit allowed at the rate of 2% per month or part of a month.

IV) Accounts are strictly net and remittances by cheques should be

accompanied by the remittance advice, indicating the invoices being

settled.

3. Credits

acknowledged by the seller’s official credit note.

4. Delivery

I) Stated delivery terms shall not be binding on the seller. The seller

shall not in any event be liable for any cost or damage caused by any

reason of any delay in delivery.

Ii) A goods delivery will be assumed to have been made unless proof

of delivery is requested within 14 days of invoice date. The buyer

shall be deemed to have examined the goods at the time of delivery.

5. Force Majeure

The seller shall not be liable in any way for loss or damage arising

directly or indirectly through or in consequence of delivery of the goods being prevented or delayed by happenings or occurrences due

to or by reason of mobilisation, hostilities, acts of the Queen’s enemies

or war (whether declared or not), government action, departmental

instructions or act of god, riots, combination of workmen, lockouts,

strikes or disturbances wherever taking place, shortage of labour, raw

materials, fuel or power in consequence of non-delivery or any other

cause, want of transport, accidents, fire, flood, blocking of or accidents

advertised times, reduction or stoppage of output at the works where the goods are being manufactured or premises to which they are to be

provision to the seller of any materials information or instructions

pertinent to the fulfilment of the order for the goods by the seller, or

any other causes or any circumstances whatsoever beyond the seller’s

and in these circumstances the seller expressly reserves the right to

cancel or suspend the whole or any part of any delivery.

6. Quantities

will be stated in the invoice.

7. Warranty and Liability

I) T

set out in the seller’s published literature in relation to the goods current at

the date hereof and made available to the buyer and that the goods

are of merchantable quality.

II) The application, use and processing of the goods is the absolute

writing or by way of trials or tests, is given without warranty as to the

suitability of the goods for their intended purposes and applications.

III) The buyer shall be deemed to have examined the goods at the

time of delivery and unless notice of any defect is given by the buyer and received by the seller within 14 days after delivery the seller shall

be relieved and discharged from any liability in respect thereof.

IV) The foregoing paragraphs inclusive shall apply save that if any act

of parliament or other statutory provisions for the time being in force

shall avoid or make enforceable any of the provisions thereof such

paragraphs shall be deemed to apply with the exclusions of those

provisions thereof which shall be void or enforceable as aforesaid.

8. Patents and Trade Marks

I) No warranty or representation is given by the seller that the goods

do not infringe any letters patent, Trade Marks, registered designs or

other industrial rights.

9. Assignments which these conditions form part is personal to the

buyer who shall not assign the benefit thereof without the seller’s

written consent.

10. Proper Law

The construction, validity and performance of this contract shall be

governed by the law of England.

11. Property and Risk

I) Delivery of the goods shall be:

A) Where the seller undertakes delivery of the goods when they are

loaded off the seller’s vehicle, ship or other transport at the station

port or address specified by the buyer,

B) Where the buyer undertakes to collect the goods, when they are

loaded onto the buyer’s vehicle or other transport at the address of

the seller. II) Passing of property:

Terms & Conditions

Ventas, Servicios al Cliente y Marketing

[email protected]

www.vdsmx.com

T - +52 (272) 728 93 81

Stay up to date with ISC e-Mail Alerts!

relevant to

your chosen industry.

Solutions in Metal

Documents

Catalogo ISC 2014