Catálogo de SRM 2014

2014

EN

TablE of coNTENTour Philosophy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Why SRM Power? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

The SRM Difference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

craftsmanship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SRM Powercontrol 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Shimano 11-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Shimano 10-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

cannondale Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

campagnolo Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Specialized Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Rotor 3D Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Rotor 3D+ Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

SRaM Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

fSa f-force light Road . . . . . . . . . . . . . . . . . . . . . . . . . . 24

fSa Gossamer Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Tune Smartfoot Road . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

THM clavicula Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Shimano 2x10 MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Shimano bMX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Shimano Downhill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Rotor 3D+ MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

fSa K-force light MTb . . . . . . . . . . . . . . . . . . . . . . . . . . 33

SRaM 2x10 MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

SRaM 1X MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Tune Smartfoot MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

cannondale MTb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

SRM Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Rotor Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SRM Ergometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Torque analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

SRM Indoor Trainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

IcoN KEY

PoWERMETER – Expected battery lifespan for the PowerMeter battery in hours of use - the battery is not rechargeable . Powercontrol – Expected battery life of a full charge cycle - this battery is rechargeable .

bolT cIRclE DIaMETER (bcD) – Standard PowerMeters have a 130mm bcD . compact PowerMeters have either 110mm or 130/110mm bcD . The 130/110 is exclusive to SRM and allows for standard 53/39 or 50/34 rings .

WEIGHT – Includes PowerMeter, left and right crank, chainrings and chainring bolts (except when noted) . Not including the bottom bracket!

cRaNK lENGTH – Individual length for each PowerMeter crank in 2 .5mm increments . SRM offers cranks from 150mm – 190mm depending on the PowerMeter type .

Q-facToR is the distance from the outer edges of the pedal threads between the left and right crankarms (measured parallel to the bb axle) - Pedal washers included!

MaTERIalS – SRM offers several different crank arm solutions with different materials in the arm and axle . It’s an overview of the materials and their performance .

cHaINRINGS – Standard PowerMeters contain 53/39 and compact 50/34 chainrings – all other PowerMeters as described . other chainring combinations only if available and on request!

boTToM bRacKET (bb) – Shows if the bottom bracket is included with the product or not . Weights are only shown for Standard bb’s .

aNT+™ TEcHNoloGY is used to transmit data information from the PowerMeter to the SRM Powercontrol 7 or other third-party aNT+™ head units and sensors .

USb – The SRM Powercontrol 7 is USb compatible and connects via a standard USb Mini-b plug to your Pc or Mac .

NEWS aND facTS – Whenever there is something special about this product or if its new for 2014 you will find the info here .

Our PhilOsOPhyFounded on the principles of precision, innovation, durability and quality, srM has set the gold standard within the power measurement industry. in 1986 uli schoberer, the founder of srM, invented the cycling PowerMeter. For the last 25 years srM has developed the finest scientifically tested power measurement products for cyclists all over the world. These are the ideal products for individuals who understand that power data is critical in developing fitness and race strategies. As fast as innovations in bicycle design and technology have expanded, so too has srM’s capacity to continuously design new crank-specific power measurement devices that are compatible with today’s most popular cranksets and frames. The extensive relationships we have built within the global cycling industry in both the product and competitive arenas underlie our belief in constant improvement and innovation. At srM we work tirelessly to provide the best power measurement system on the market, we also work just as hard to make sure our customers receive an impeccable level of service and support. Each srM Training system is handmade to assure the finest quality possible, and the customer can expect expert, personalized support for the lifetime of the product.

Our spirit of excellence and innovation defines us and drives all that we do. if you are the owner or dealer of an srM product, we thank you for using our system. if you are considering the purchase of an srM, welcome to the world of cycle training with power and precision. yours,

ulrich schoberer - Founder and President of srM

1

Why srM POWEr?

The srM Training system measures all the data needed to organize your training and to analyze your race efforts. The srM PowerMeter measures the applied torque and cadence at the most direct point of application - the crank set. This gives you the benefit of the most reliable and accurate power data available. in addition, the srM PC7 also measures heart rate, speed/distance, energy, altitude and temperature. since power is the most accurate measure of fitness this allows you to optimize the time and effort you spend on the bike, and get the most from your training. Knowing your precise workload and following it throughout your training prevents injuries and overtraining, while ensuring you get the maximum performance out of each ride. Not only will your training quality improve, but there will also be a marked increase in training efficiency.

When it comes to training and racing with a PowerMeter, the srM has been the “Gold standard” for more than 25 years. All over the world professional cyclists, triathletes, coaches, universities and national cycling federations trust and depend on the precision, durability and quality of the srM Training system.

Take a look at how the srM system can improve your Training:

• Measuring and recording your fitness level in real-time and tracking your development over time• Helping you to train in your correct training zones with the aid of the most accurate

power, cadence and heartrate measurement• Preventing overtraining or even injuries by constantly comparing your power data to your heartrate• Making your training session more effective - without costing you more time• Making interval training easier - with the touch of a button • Helping to improve your nutrition planning with the aid of precisely measured

mechanical energy expenditure• Collecting race data will make your training more focused• Pacing yourself for time trials with power or heart rate limits• Analyzing and comparing data easily with the SRM Software (PC/MAC compatible)

which is part of the srM package

2

3

ThE srM DiFFErENCE

POWErED by ExPEriENCE

Each srM PowerMeter and PowerControl head-unit are made one at a time, by hand. Our production facilities are located in Jülich, Germany and Colorado springs, usA. Every step of production is carried out by highly trained engineers and technicians who have a passion for quality craftsmanship.

rACE PrOvEN DurAbiliTy

srMs are designed to take whatever you can throw at them. From freezing temperatures, to boiling heat, srMs are designed to handle temperature compensations while maintaining accuracy with our “Auto” offset feature. each srM is designed to be sealed against water, snow, mud, sand, and cleaning solvents. srMs are designed to work. Period.

ACCurACy is EvEryThiNG

srM uses a 144 point calibration protocol against a known mass measured to the exact gram. With exacting calibration and our auto-offset feature, the resulting power measurement of the srM has error of less than 1%. The scientific community has been publishing peer reviewed research for over 20 years using the srM PowerMeter as the bench mark for measuring power in physiological and human performance research studies. We don’t claim anything, our accuracy is proven.

DEPENDAbiliTy yOu CAN COuNT ON

Up to 3000 hours of battery life (depending on model) give SRM‘s year after year of uninterrupted use. A three-year global-warranty protects against defects and backs up your investment. Add on the industry‘s leading accuracy and data reception rate for a truly unrivaled power measurement device.

4

Craftsmanship

CrAFTsMANshiP

5

ThE POWEr OF DEsiGNOur design process uses 3D Form Modeling and Finite Element Analysis (FEA) to determine the best structural layout for a strain gauge based measuring system. The foundation of each srM PowerMeter is subject to a durable component design as a crank spider, even before its given electronics and measurement capabilities.

MAChiNiNG FrOM A sOliD blOCK OF AluMiNuMEach srM PowerMeter chassis is machined in Jülich, Germany, or Colorado springs, usA. Our CNC Machinists are isO Certified to Military specifications. Each srM PowerMeter is produced to exacting standards from 7000 series aluminum to tolerances within five hundreths of one millimeter (0.05mm). This produces a PowerMeter with absolute symmetry, yielding a stable offset frequency and consistent slope value. Each PowerMeter is also anodized to protect the aluminum and create a stronger surface.

sTrAiN GAuGE iNsTAllATiONApplying strain gauges is an art as well as a science. Each srM PowerMeter uses custom designed strain gauges, each placed by hand and aligned to exacting standards. This process allows for rock solid offset stability. A stable offset frequency means a more accurate power measurement.

ElECTrONiC MANuFACTuriNGThe electronics of srM are designed to withstand the forces and harsh environments of cycling. All soldering connections of the srM circuit board are reinforced above normal consumer electronics, allowing for increased durability. Following manufacturing, each circuit board is inspected as part of our extensive quality control process.

CrAFTsMANshiP

6

AssEMbly: A hANDs ON APPrOAChOur employees are our secret for success. Each specially trained technician follows a meticulous process for new builds as well as servicing existing product. Our technicians carry on the proud legacy of building the worlds greatest power measurement devices! Every srM Product is made by hand in Colorado springs, usA or in Jülich, Germany.

CAlibrATiON ThE COrNErsTONE OF ThE srM POWErMETEr.Without an accurate calibration, any measuring system would be flawed. linearity of slope is a critical component to ensuring accuracy at lower power outputs as well as during high power sprint efforts. Each srM is calibrated against four increasing loads ranging from 20 to 100 kilograms of known force. Each weight is measured to the exact gram to maintain the highest level of accuracy. since the srM was designed to be a transparent scientific measuring tool for torque, our calibration process can also be replicated by consumers!

7

srM POWErCONTrOl 7

Available with Custom laser Engraving

(aluminum model only)

130h6061 Aluminum Top Case or Fiberglass-reinforced

PA6 Case 78g (Aluminum)68g (PA6)

8

• Real Time Display: Power (W), Cadence (rpm), Speed (mph/kph), Heartrate (bpm), Energy (kJ), Training Zones, Intervals, Temperature (°F/°C), Altitude (ft/m), Ride Time, Daytime Clock. Also displays average and maximum of each value.

• interval of storage: 0.5 – 5 seconds

• Memory: 130 hours (@ 1 second interval)

• Dimensions: 62mm x 65mm x 20.25mm (W x H x D)

• Downloadable: yes, via integrated Mini-usb interface

• Software Compatibility: srMWin software and Training Peaks WKO+ (Windows), SRMMac Software and TrainingPeaks.com (MAC™)

• Device Compatibility: srM Wireless PowerMeter, ANT™ and ANT+™ Heartrate Straps and Speed pods, ANT™ Cadence pods, ANT+™ Combined Cadence and speed pods

©tdwsport.com9

shiMANO 11 sPEED rOAD

165mm - 180mm110mm

53/39 52/3650/34

3000h 768g

147.5mm

New shimano FC-sr70 Alu-minum Crank Arms, Custom

Made for srMby shimano

New for 2014!

Not included

10

11

12

shiMANO 10 sPEED rOAD

165mm - 180mm1900h

147.5mm

Available in both standard and Compact Models

shimano 7800 hollowtech ii Crank Arms,

24mm spindle Not included

130mm (7900) 110mm (7950)

780g (Standard) 727g (Compact)

53/39, 50/34

13

©tdwsport.com14

CANNONDAlE rOAD

170mm - 175mm*1900h

141mm


Cannondale sisl2 Aluminium

*(Crank Arms Not Included) Not

included

130mm (Standard) 110mm (Compact)


53/39, 50/34

* (Crank Arms available from Cannondale)

15

©tdwsport.com16

CAMPAGNOlO rOAD

170mm - 175mm1900h

145.5mm


unidirectional Carbon-Fiber Crankarms;

steel Axle Not included


53/39, 50/34

17

©tdwsport.com18

SPECIAlIZED ROAD

167mm - 177mm*1900h

147.5mm


specialized s-Works Carbon Cranks

* (Crank Arms Not Included) Not included


642g (Standard)596g (Compact)

53/39, 50/34

* (Crank Arms available from Specialized)

19

rOTOr 3D rOAD

170mm - 175mm1900h

147mm


Machined Aluminium Crank set, bsA 24mm steel Axle

Not included

130mm (Standard) 130/110mm (Compact)


53/39, 50/34

20

rOTOr 3D+ rOAD

170mm - 175mm1900h

147mm


Machined Aluminum Crank set, 30mm Axle

Not included



53/39, 50/34

21

©tdwsport.com22

170mm - 177mm1900h

145mm

Not included

srAM rOAD

unidirectional Carbon Fiber Crank Arms

Available in both standard and Compact Models with

bb30 or GxP spindles


826g (Standard GXP) 762g (Compact GXP) 804g (Standard BB30) 742g (Compact BB30)

53/39, 50/34

23

FsA K-FOrCE liGhT rOAD

170mm - 175mm1900h

53/39 50/34


hollow Carbon Arm, 24mm steel Axle or

Available 30mm Axle on bb386 Model



150mm (24mm Axle), 147mm (BB386)

included bb-8200 Ceramic - 92g

24

FsA GOssAMEr rOAD

170mm - 175mm1900h

150mm


Cold Forged Aluminum Crank Arms,

24mm spindle



53/39, 50/34 included bb-6000 – 103g

25

TuNE sMArTFOOT rOAD

172mm - 175mm1900h

147mm


7075 CNC Aluminum Crank Arms, Aluminum 30mm

spindleincluded


770g (standard) 750g (Compact)

53/39, 50/34

26

ThM ClAviCulA rOAD

170mm - 175mm1900h

148mm


Carbon Fiber Cranks Produced in an rTM Process,

high-strength Aluminum spindle. included



53/39, 50/34

27

shiMANO 2x10 MTb

170mm 175mm950h

172mm

shimano Forged Aluminium Crank Arms, 24mm spindle

120/80mm

705g

Not included38/26, 40/28

28

shiMANO bMx

175mm 180mm700h

176mm

PowerMeter Wired(PowerControl V)

Dxr Forged Aluminumhollowtech ii Crankset

included Mx-70

104mm

794g

32, 34, 36, 38, 40

29

30

shiMANO DOWNhill

shimano Forged Aluminium Crank Arms, 24mm spindle

793g

32, 34, 36, 38, 40

950h Not included104mm

192mm

165mm, 170mm

31

rOTOr 3D+ MTb

170mm - 175mm950h

163mm

Aluminium rotor 3D+ Crank Arm,

30mm Aluminium bb Axle

Not included

120/80mm

521g

38/26, 40/27, 42/28

32

FsA K-FOrCE liGhT MTb

170mm 175mm950h

171.5mm

Available in both 2x10 or 3x9 Models.

hollow Carbon Arm, 24mm steel Axle, Ceramic bb

120/80mm104/64mm

757g (2x10)783g (3x9)

42/28, 39/26 (2x10), 44/32/22 (3x9)

included bb-9200 Ceramic - 107g

33

srAM 2x10 MTb

170mm 175mm950h

168.5mm

unidirectional Carbon Arms (SRAM X.0),

24mm steel spindle

Not included

120/80mm

703g

42/28, 39/26

34

srAM 1x MTb

170mm 175mm950hNew for 2014

unidirectional Carbon Cran-karms (SRAM X.0 DH or X.0),

24mm steel spindle

Not included

104mm

589g

30, 32, 34, 36, 38, 40178.5mm (83mm BB Shell),

168.5mm (73mm BB Shell)

35

36

TuNE sMArTFOOT MTb

172mm 175mm950h

167mm

7075 CNC Aluminum Crank Arms, Aluminum 30mm

spindle

included

120/80mm

676g

42/28, 39/26

37

38

CANNONDAlE MTb

170mm - 175mm*950h

160mm

Available in both 2x10 or 3x9 Models

Cannondale sisl2 Aluminium

*(Crank Arms Not Included) Not

included

120/80mm104/64mm

521g (2x10)537g (3x9)

42/28, 39/26 (2x10), 44/32/22 (3x9)

* (Crank Arms available from Cannondale)

39

srM TrACK

165mm – 180mm1900h

141mm

7075 Aluminum Crank Arms

738g

144mm

shimano Octalink Not included

Chain rings Not included

40

rOTOr TrACK

165mm – 175mm1900h

141.5mm

7075 Aluminum Crank Arms with 24mm steel Axle

745g

144mm

bsA Threaded Not included

Chain rings Not included

41

• SRM Ergometer with integrated SRM Training System - Science version (0.5% accuracy). The PowerMeter is Wireless ready.

• The saddle and handlebar position can easily be adjusted and locked using quick release levers for a wide range of positions to fit cyclists between 140 and 200 cm height (4’7” – 6’7”).

• Narrow Q-Factor of only 151mm.

• Individually adjustable crank length from 150 – 190mm in 2.5mm increments.

• Smooth running gearbox with an eddy current brake and braking power from 20 to 2500 watts; up to 4000 watts for short intervals.

• Compatible with Polar™ heartrate belts

• Stiff and sturdy design (Total weight 100 kg / 220 lbs), powder-coated aluminum frame and stainless steel parts allow for precise measurements and years of reliable use.

• Two interchangeable large flywheel masses simulate the kinetic energy and the “sensation” of cycling at realistic speeds. in addition to the flywheels we added a low maintenance 14-gear rohloff hub to allow for smaller adjustments of the kinetic energy to simulate each athlete’s weight and riding speeds in real conditions.

• SRMWin software which is part of the package includes a simple editor to

create and save different test protocols.

• All data are shown on the screen in online mode and then saved automatically. The data can be analyzed using the srMWin software.

• Requirements: PC with Windows XP, Vista or 7 (32 or 64bit), usb or serial rs232 port

• Ethernet Torque Analysis (see page 43) included

• The two different operational modes are:

isOKiNETiC MODE:

This mode measures maximum power and physical condition with a defined cadence. The cyclist himself determines the power output, as the Ergometer keeps the cadence constant. This makes it possible to determine the actual endurance capacity in relation to a pre-set time and cadence.

hyPErbOliC MODE:

For step and ramp tests this mode is perfect as it keeps power constant independently from the cadence. The cyclist can determine the optimum, individual cadence; the Ergometer keeps the power constant.

Power in the lab - accurate scientific results, professionally testedThe srM high Performance Ergometer is designed to simulate cycling indoors for scientific testing, research and high-level monitored training. The Ergometer is used world-wide in university laboratories, coaching facilities and by national cycling and triathlon federations.

TEChNiCAl sPECiFiCATiONs:

srM ErGOMETEr

42

Analysis screen, marker panel, revolution table with input-output function (load, save and export) and average calculator

Measuring torque is one of the best methods to optimize bike fitting and rehabilitation, understand the distribution of power during all 360 degrees of the pedal revolution, and to analyze the strengths of different pedaling styles. The srM Ethernet Torque Analysis box is a rugged and effective solution designed to the exacting standards of all srM products. The included software provides online data analysis and simple one-key recording of data. Torque is displayed in three different types: Nm, kgm and Nm/kg. revolution data can be saved with unique rider profiles and overlaid with information from previous sessions to track changes. Differential analysis at any point of the pedal revolution means that it is easy to understand and communicate rider strengths. Additionally, data can easy be exported to document (PDF), image (PNG) and raw data (CSV).

COMPATibiliTy: MS Windows (>=XP), Apple OSX (>=10.5), linux (>=Kernel 2.6)

REQUIREMENTS: Java RE (>=1.6), Ethernet Port (RJ45), special PowerMeter (for signal transmission)

This product is only compatible with stationary bike

“The srM Ethernet Torque Analysis box represents a new standard in torque measurement and analysis”

Main screen with online data, current revolution overlayed and recording panel

ETHERNET TORQUE ANAlySIS

43

44

TEcHNIcal SPEcIfIcaTIoNS:

• Fully adjustable: saddle and handlebar position can be adjusted to any position for cyclists of between 165 and 200 cm (5’5” to 6’7”) so you can set you your trainer to simulate the geometry of your race bike

• The frame has a standard BSA bottom bracket housing to allow for installation of almost all SRM Systems .

• With the SRM System on the Indoor Trainer and on your bike, you can collect power data all year long .

• Gearbox: NuVinci™ hub

• TIG-welded steel frame equipped with stainless steel and aluminum parts (Total weight 55 kg / 120lbs) – including handlebar and saddle .

• Heavy flywheel (23.5kg / 52lbs) realistically simulates the kinetic energy of riding outside

• Strength training possible with low cadence of 40 rpm and up to 400 watts

• Max. braking power of 1400 watts (at 120 rpm)

If you want to start the season off in top condition, you need to maintain a regular training schedule regardless of the weather during the winter months . In response to many inquiries, SRM has developed a revolutionary indoor trainer concept . Instead of copying existing designs on the market, SRM has designed an Indoor Trainer with the same quality and precision as the SRM PowerMeter . The Indoor Trainer includes a magnetic brake which can be controlled manually with a twist shifter that controls the resistance . To allow for a wide power and cadence range, we added a multi-geared freewheel hub – to be controlled manually as well . The combination of a low maintenance drive train and a non-contacting brake creates a perfect formula for your training session .

SRM INDooR TRaINER

45

SRM Germany

Rudolf-Schulten-Str . 652428 JülichPhone: +49 2461 69 123 0 fax: +49 2461 69 123 17Email: info@srm .de

SRM USa

720 West Monument Streetcolorado Springs, co 80904Phone: +1 719 266 4127fax: +1 719 266 4284Email: usa@srm .de

SRM Italia

Via della Rimembranza 72655100 luccaPhone: +39 0583 332036fax: +39 0583 331684Email: italia@srm .de

SRM oceania

104b Weston Road8052 St albans, christchurchNew ZealandPhone: +64 (3) 355 9467fax: +64 (3) 355 9469Email: oceania@srm .de

Documents

Catálogo de SRM 2014