When Inspection Needs Perfection

A30

Catalogo A30-2014_Layout 1 21/03/16 18:08 Pagina 1

A30 machine has been designed to be inserted downstream from filling and sterilizing lines and

upstream from labelling and packaging systems.

Once loaded on the conveyor belt, the containers (ampoules, vials, cartridges) are sent to the

inspection path, where all the inspections are carried out. Process control is totally automatic.

Each container undergoes a series of inspections, including particles, fill level, cosmetic inspections

(optional), performed by high speed cameras. The integrated electrical cabinet contains all the

electronics which control the machine, including power section.

A swivelling operating panel equipped with pushbuttons and a touch screen PC provides the user

interface, which allows the user to select or modify the inspection parameters and to print production

reports; it also displays some diagnostic information about the state of the various parts of the machine.

conc

ept:

over

-prin

t.it

BREVETTI C.E.A. SpA

Via del Commercio, 28 - 36050 Sovizzo (VI) ItalyTel. +39 0444.551.988 - Fax +39 0444.536.241www.brevetti-cea.com - info@brevetti-cea.com

Rev

. 2 ·

03/2

016

Specification subject to change without notice.All rights reserved. The copying of technical data and images is forbidden. © Copyright BREVETTI C.E.A. SpA

A30

Inspected containers: Vials, Ampoules and Cartridges

Products to be inspected Waterlike, Suspensions, Oily, Freeze-dried

Container size: Diameter: from 8 mm to 36 mm Height: up to 135 mm

Machine nominal speed: up to 200 pcs/min (12.000 pcs/h)

Container inspected: 1 at the same time

Spindle Rotation Spindles driven by belt.Up to 4 rotation motors according to machine configuration

Rotation speed: Continuous regulationUp to 3000 rpm

Loading: By trays or in line

Unloading Accepted: By trays or in line

Unloading Rejected: By trays

Electric supply: 230V±10% - 50/60Hz - 1Ph + PE

Power: 3kW

Dimensions (WxDxH): 2500x1210x2050mm

Weight: 900 kg

Loading height: 975 mm ± 25 mm

Unloading height: 975 mm ± 25 mm

Noise: < 75 dB(A)

Particles, fill level and cosmetic inspection

RPV Remote Parameterization & Validation

Manual loading

“Fail safe” reject verification system (Optional)

21 CFR part 11 compliance for electronic records (recipes, batches/sub-batches, audit trail)

Ethernet connection

User friendly interface

In-line connection to upstream and downstream equipments.

Product colour (Spectrometer)

Product opacity (Opacimeter)

OCR/OCV

The information given on this data sheet is accurate as for the date of issue. Nothing here in shall bedeemed to constitute a warranty, explicitly or implicitly. It is the user’s responsibility to determine theapplicability and suitability of such material to any particular purpose.

Catalogo A30-2014_Layout 1 21/03/16 18:08 Pagina 2