CATALOGO 4 poison

ELKRON. THE HI-PROTECTION COMPANY

ANTINTRUSION

22

3

THE HI-PROTECTION COMPANYSince 1974 Elkron has been committed to guarantee Security to any type of application, from small home systems to large installations. As a leading company in its sector and confirming its position with 14 Quality marks in many different countries, 21 International Patents registered, 1600 different products designed and developed, and 27 million pro-ducts sold. Elkron has made a huge progress in research and innovation expressing new and unique solutions and gaining a steady international reputation in Security.

As a fundamental achievement for its constant commitment to total quality, Elkron has always complied with the strictest international stan-dards, generating a permanent process to check that such pro-fessional standards are constan-tly maintained as well as to ensu-re a continuous improvement of the products, respecting all the operating phases, from the ini-tial product concept, to design, manufacturing, sales and distri-bution, and finally to customer support.

Last but not the least, Elkron is a leading participator as coordi-nators and experts, in domestic (CEI) and European (CENELEC) standardisation projects.

www.elkron.com

3

4

THE ANTITHEFT ELKRON OFFER

Sistema MP105

WIRELESS SYSTEM

Sistema MP105

WIRE ALARM SYSTEM

Wireless control unit with two-way com-munication (Reply Technology). It ma-nages burglar, fire and system failure events separately. Up to 4 freely pro-grammable partitions which can be as-sociated to inputs and outputs. The ex-clusive, sophisticated protocol ensures maximum security of communication under all conditions.

WL31The ER20WL interface works with bus control units (MP110, MP120) acting as wire concentrators. The interface is powered by the bus, locally manages wire and radio peripherals and constan-tly exchanges respective status and alarm information with the control unit.

ER20WL

PAGE

50PAGE

60

4

Control unit suitable to make small size system provided with 4 alarm. Pro-grammable part set in 2 groups. Set-ting/unsetting through electronic keys, proximity reader, remote keypad, built-in electronic key module, mechanical key.

MP105

Expandable (up to 56 zones) control panel with pc up/down loading. 8 zo-nes in the control unit expandable up to 56 zones. Programmable part set in 8 groups+total. System locally program-mable from a PC over USB connection or remotely programmable via modem. Remote alarm transmission.

MP120

Expandable control panel with 8 zones expandable up to 256. Programmable part set in 12 groups+total. Setting/un-setting through electronic keys, partiali-sers, remote keypad. Alarm transmis-sion over telephone line. System locally or remotely programmable via modem. Weekly-date time scheduler.

MP200

Expandable (up to 56 zones) control panel with pc up/down loading. 8 zo-nes in the control unit expandable up to 56 zones. Programmable part set in 3 groups+total. System locally program-mable from a PC over USB connection or remotely programmable via modem. Remote alarm transmission.

MP110

Expandable control panel with 8 zones expandable up to 56. Programmable part set in 8 groups+total. Setting/un-setting through electronic keys, proximi-ty reader, remote keypad. The system allows integration of several devices for home security and automation, like au-dio/video controls, safety sensors, personal emergency care, etc.

MP508

PAGE

14

PAGE

30

PAGE

44

PAGE

24

PAGE

36

Expandable (up to 28 zones) control panel with pc up/down loading. 4 zo-nes in the control unit expandable up to 28 zones. Programmable part set in 3 groups+total. System locally program-mable from a PC over USB connection or remotely programmable via modem. Remote Alarm transmission integrated.

MP106TG/V

PAGE

18

5

VOLUMETRIC DETECTORS

IR 015CeilingFresnelLensCoveragediameter 9 m

INFRAREDIRA 12Analogic Extravision TrifunctionalLens12/20 m

IRA 13AnalogicInterchange. FresnelLens. 12/20 m

IRA 15PDigital FresnelLensPET Immunity 12/25 m

DOUBLE TECHNOLOGY

IR21LDMirror60 m

PERIMETER PROTECTION

MS04Vault detector for break-in attempts on reinforced con-crete walls, safes, armoured cabinets, etc..

PERIMETER PROTECTION

GD03/GD05Glassbreakdetector

ESD30Sismic detectorfor doors and windows

MS04PKSame as MS04 but with cover patch device for protection of safes


IRA 14Digital Extravision TrifunctionalLens 12/25 m

IMA 12Extravision TrifunctionalLensAutoequalizer 12 m

IMA 13Interchange. FresnelLens. Autoequalizer 15 m

IM915AMExtravision TrifunctionalLensAutoequalizerAntimasking15/25 m

IM29CPUFresnelLens Autoequalizer 13/25 m

IMA 15AMInterchange. FresnelLens Antimasking15/30 m

MICROWAVE

MW21PDAdjustableAntimasking30 m

VOLUMETRIC FOR OUTDOOR

IMA 20 EXTripleTechnologyIR mirrorMW double lobe10 m

IMA20EX/AMTripleTechnologyAntimasking10 m

SURFACEMAGNETICCONTACTS

MAGNETIC CONTACTS

MAGNETICCONTACTSFOR PIVOTINGDOORS

ROLLERSHUTTERCONTACTS

FLUSHMAGNETICCONTACT

PAGE

67PAGE

68PAGE

69PAGE

70PAGE

71PAGE

71

PAGE

73PAGE

74PAGE

75PAGE

76PAGE

76

PAGE

77PAGE

77

PAGE

80PAGE

80PAGE

81PAGE

81

PAGE

83PAGE

83PAGE

84PAGE

85

PAGE

76

5

6

SOUNDERS


OUTDOOR PROTECTION

EL15R/TOutdoor synchronized barrier with disqualification circuit. Max range 100m.

INFRARED BARRIERS

EL20Indoor / outdoor bar-rier. 4 models with eights from 0,5 to 3m. Range up to 10m for indoor and up to 20 m for outdoor.

EL10R/TOudoor barrier with disqualification circuit. Max range 100m.

PAGE

88PAGE

91PAGE

90PAGE

93

EL50RTIndoor / outdoor barrier. 3 models with range from 60 to 250 m (for indoor from 120 to 500m)

MICROWAVE BARRIERS

MWA60R/TOutdoor barrier with automatic compensat ion and disqualifica-tion circuit. Range 60m.

MWA120R/TOutdoor barrier with automatic compensat ion and disqualifica-tion circuit. Range 120m.

PAGE

96PAGE

96

HP202LXPolycarbonateself-poweredsounder withanti-approaching device103dB

OUTDOOR SOUNDERs

700 SERIESRange of self powered die cast aluminium sounders103dB.

HP 202Polycarbonateself-poweredsounders.103dB

PAGE

100PAGE

102PAGE

103

HP602LGStainless steel microprocessor based sounder102dB

HP305Self powered sounder in metallic box112dB

INDOOR SOUNDERS

HP12Sounderin plasticbox110 dB.

HP25Sounderin plasticbox126 dB.

PAGE

104PAGE

104PAGE

104

HP301ASelf powered sounder in metallic box111dB

COMMUNICATORS

CT06PSTNcommunicator2 alarm inputs12 numbers2 remote commands

GMS COMMUNICATORS

CT10-MVocal synthesis GSM communicator

PAGE

106PAGE

107PAGE

108

PSTN COMMUNICATORS

CT11-MBi-standardGSM/PSTNVocal synthesiscommunicator12 numbers

PAGE

103

PAGE

104

6

MW30RTOutdoor barrier 4 m o d u l a t i o n c h a n n e l s . Range 180m.

PAGE

96

7

ANTENNA GSM 1 AN0300111 43

ANTENNA GSM 2 AN0400111 43

AS02/S PS3400111 114

AS07/S PS3500211 114

AS15 PS3200211 114

AS27 PS3300211 114

AT01 AT0410143 113

BASE SP50/20 SP8710123 94

BASE SP50/30 SP8810163 94

CAVO X KP CV3010111 42

CONTROPIASTRA SP8510111 102

CP 4F MP5900111 17

CP 8Z MP7400111 17

CT06 CT4900211 108

CT10-M CT4600111 106

CT11-M CT4700111 107

DK20 DK1700111 34

DK2000M DK2000111 34

DK2000M/B DK2400111 34

DK21S DK2300211 111

DK30 DK3500111 41

DK3000M DK3000211 41

DK40 DK0100211 48

DK4000M DK2100211 48

DK4000M/B DK2500211 48

DK41S DK0300211 105

DK50 DK5400211 41

DK500M-E DK5000211 41

DK500M-E/B DK5100211 41

DK500M-P DK5200211 41

DK500M-P/B DK5300211 41

DKA/A KT2500111 112

DKA/EIK KT6C00111 112

DKA/G KT2400111 112

DKA/I KT2200111 112

DKA/L KT2300111 112

DKA/VI KT7500111 112

DKAB/G KT2800111 112

DKAB/A KT2900111 112

DKAB/I KT2600111 112

DKAB/L KT2700111 112

DKAB/AXO KT5C00111 112

DKAB/EIK KT7C00111 112

DKAB/VP KT7700111 112

DKA/AXO KT4C00111 112

DKR4 DK0900211 111

DKZ4/4000M DK2200211 111

DKZ4/4000M/B DK2600211 111

EL10R/T EL0800111 91

EL15/S EL0360115 90

EL15R/T EL0400111 90

EL20RT/10 EL1100211 89

EL20RT/15 EL1200211 89

EL20RT/20 EL1300211 89

EL20RT/05 EL1000211 89

EL50RT/2PH-150 EL1500113 93

EL50RT/2PH-60 EL1400113 93

EL50RT/4PH-250 EL1600113 93

EP 200/4Z MP6700111 48

EP 200/8Z MP6600211 48

EP100 MP7210111 35

EP508 MP7K00211 42

ER20WL R WL1310113 62

ER20WL R/T WL1210113 62

ES100 MP7310111 35

ESD30 VV0500113 80

FAST LINK SW1300111 49

FO31WL SD4000121 59

GA 01 KT1500111 91

GABBIA HP8910111 102

GD03 GD0300113 70

GD05PL GD0400113 70

HI-CONNECT SW2400111 57

HP12 HP2800113 104

HP202L HP5000111 102

HP202LG HP5100111 103

HP202LX HP5200111 103

HP20WL HP8000113 63

HP25 HP0200111 104

HP301A HP0800311 104

HP305 HP5300211 104

HP305P HP5300311 104

HP30WL HP8100111 59

HP602LG HP5700111 103

ALPHABETIC INDEXPRODUCT NAME CODICE PAGE PRODUCT NAME CODICE PAGE

7

8

HPA701 HP8400211 100

HPA702L HP8500211 102

HPA702LG HP8600211 101

HPA703XP HP8700211 102

HPA730XP/H HP9000211 102

IL03R/T IL0100111 82

ILT100 CT4210111 29

IM 29 CPU IM1800111 76

IM915AM IM2600111 76

IMA12 IM3000211 73

IMA13 IM3100211 74

IMA15AM IM3200211 75

IMA20EX IM3300113 77

IMA20EX/AM IM3400113 77

IMG30 CT5110111 57

IMG500 CT5510111 42

INTERFACCIA ETHERNET IT1200111 43

IR015 IR4A00211 71

IR20WL IR2B00113 63

IR 21 LD IR0600211 71

IR30WL IR3B00211 58

IRA12 IR4B00211 67

IRA13 IR6100211 68

IRA14 IR7B00211 69

IRA15P IR6B00211 70

IRA31WL IR5B00211 58

IRA31WL/P IR8B00211 58

IT 485 MP9110211 49

IT USB MP9H10111 35

IT USB/KEY MP5K10111 42

IV 4Z MP9610111 35

KIT 2 LENTI LR 1,2 G1 12V1 LT1410111 71

KIT 2 LENTI VB 1,2 G1V1 LT1310111 71

KIT 2xPH-60 KT9B10163 94

KIT AMP/MWA KT1C10113 97

KIT COPERCHIO EL0910111 91

KIT DK30-50 KT9410111 41

KIT FISSAGGIO KT4800111 59

KIT MP110A+KP100 MP4A00111 28

KIT MP110A+KP100D MP9A00111 28

KIT MP110TGA+KP100 MP3A00111 28

KIT MP110TGA+KP100D MP6A00111 28

KIT MP508TG/FC KT9900111 40

KIT MP508TG/FC/IMA KT5800111 40

KIT MP508TG/FC/IRA KT6A00111 40

KIT MP508TG/FC/IMA/L KT7A00111 40

KIT MP508TG/FC/IRA/L KT8A00111 40

KIT SOCCORSO KT5700113 110

KIT PER SP11/15 KT1320161 92

KIT PER SP11/20 KT1420161 92

KIT PER SP11/25 KT1520161 92

KIT PER SP11/30 KT1620161 92

KIT SP50 KT8B10163 94

KIT TAMPER SPA10 KT7800111 71

KIT TAMPER KT5000111 71

KP 200D/I KP2700211 48

KP100 KP2100211 28

KP100D KP2200211 28

KP106 KP3500111 20

KP120D KP4000211 34

KP30WL KP3700211 57

KP500D KP6000211 41

KP500DV KP6100211 41

KT TMP KT4700111 82

KV100 CT3410111 29

MF01 MM4500113 83

MF02 MM4600113 83

MM20WL MM4300113 63

MM30WL MM6700211 58

MM30WL-BR MM6800211 58

MMB01 MM4400213 83

MMH01 MM4700213 84

MMH02 MM4800213 84

MMH03 MM4900113 84

MMI01 MM5000213 85

MMI02 MM5100213 85

MMI03 MM5200113 85

MMI17 MM6000113 85

MMS01 MM5300113 84

MMS01-BR MM5400113 84

MMS02 MM5500213 84

MMS03 MM5600213 85

MMS50 MM5700113 84

MMS50-BR MM5800113 84

PRODUCT NAME CODICE PAGE PRODUCT NAME CODICE PAGE

ALPHABETIC INDEX

8

9

MMS60 MM6100113 85

MMS60MR MM6200113 85

MMZ01 MM5900113 85

MODEM CT3900113 49

MODEM/ROUTER CT5200111 42

MODULO PROTEZIONI HP8810111 102

MP 200/256-OM MP6400211 47

MP105 MP9700111 16

MP106TG/V MP9K00111 19

MP110 MP1A00211 27

MP110M MP5A00211 27

MP110TG MP2A00211 27

MP120 MP0400211 33

MP120M MP3H00211 34

MP120M/TG MP4H00211 34

MP120TG MP2H00211 33

MP200/256 MP6500111 47

MP200/64 MP6300111 47

MP200/64-OM MP6200211 47

MP200/256-OM MP6400211 47

MP508M/TG MP8K00211 40

MP508TG MP4K00211 40

MR02 MP7910111 29

MS04 MS0800211 81

MS04ET MS1110211 82

MS04IT MS1010211 82

MS04PK MS1200211 81

MU30 MU2910111 59

MW 21 PD MW1100211 76

MW30RT MW1900111 96

MWA120RT MW5600111 96

MWA60RT MW5500111 96

PA01-C PL2300113 113

PS/SP50 PS6810163 94

RB06 RB0410113 113

RB12 RB0110113 113

RB212 RB0110113 113

RB15 RB0810113 113

RB19 RB0310113 113

RB24 RB0510113 113

RB612 RB0910113 113

RS/MWA MW5810113 97

RS10 EL0200115 93

RS10/T EL0600115 93

RS50T EL1710163 94

RT03 RT0700173 80

RT35 RT0200171 97

RX02 RX3240143 113

SP10/15 SP1000111 97

SP10/20 SP1100111 97

SP11/15 SP1100113 92

SP11/20 SP1200113 92

SP11/25 SP1300113 92

SP11/30 SP1400113 92

SP11/M SP1600161 92

SP120/MWA SP9610113 97

SP13/15 SP1200111 92

SP13/20 SP1300111 92

SP130/MWA SP9710113 97

SP20/MWA SP9410113 97

SP50/15 KT2B00163 94

SP50/20 KT3B00163 94

SP50/25 KT4B00163 94

SP50/30 KT5B00163 94

SP50/MWA SP9510113 97

SP900/10 SP5900111 71

SPA04 SP6900111 82

SPA10/10 SP7500111 71

STM200 CT4110211 49

STM30 CT5010211 57

SV108 CT3210111 29

SV500I CT5610111 42

TELECOMANDO SOCCORSO TX1000113 110

TX02 TX7950143 113

TX02M TX7850143 113

TX31WL/5 TX3500211 57

UR1Z MP6110111 35

VIDEO GATEWAY 4I VD0800111 43

VSD 3 VV0600113 80

WL31 WL0100211 57

WL31TG WL0200211 57

ZA X SP50 SP8910163 94

PRODUCT NAME CODICE PAGE PRODUCT NAME CODICE PAGE

ALPHABETIC INDEX

9

1010

11

INDEX

WIREALARMSYSTEMS

MP105 ...........................14MP106TG/V ....................18MP110 ...........................24MP120 ...........................30MP508 ...........................36MP200 ...........................44

WIRELESSALARM SYSTEMS

WL31 .............................52WL20 .............................60

VOLUMETRICDETECTORS

INFRARED ......................66DOUBLE TECHNOLOGY ...72MICROWAVE ...................76OUTDOOR ......................77

PERIMETERPROTECTIONS

STRUCTURE PROTECTIONS ... 80INDOOR BARRIER ................82MAGNETIC CONTACTS .........83

OUTDOOR PROTECTIONS

INFRARED BARRIERS ............ 88MICROWAVE BARRIERS ........95

SOUNDERS OUTDOOR SOUNDERS .......... 100INDOOR SOUNDERS ............104

COMMUNICATORS GSM COMMUNICATORS ..... 106PSTN COMMUNICATOR ..... 108

AID KIT ..........................................110ACTIVATION SYSTEMS ................111ELECTRICAL ADAPTORS ..............112TRANSMITTERS .....................113BATTERIES ............................113POWER SUPPLY UNITS ...........114

HOME AUTOMATIONACCESSORIES

11

1212

13

WIREALARM

SYSTEM

MP105 ....................page 15

MP106TG/V .............page 18

MP110 ....................page 24

MP120 ....................page 30

MP508 ....................page 36

MP200 ....................page 44

13

14

MP105 SYSTEMWIRE ALARM SYSTEM

15

FOR SMALL SIZE SYSTEMSTo make small and medium dimension products, Elkron’s microprocessor technology provides MP105, the 4 alarm zone system expandable up to 12. The system is manageable through in-built keypad (with 4 access codes), remote keypad, electronic digital key or mechanical key. It is possible to part set the device in 2 sectors and transmit the alarm through telephone line, thanks to the optional communicator. Remote keypad, the expansion and the electronic keys dialogue on the serial line.

AUX1 2 3 4

CONTROL UNIT INPUTS (4 + 1 AUX)

MP105 SYSTEM: FROM 4 UP TO 12 INPUTS

WIRE ALARM SYSTEMS

KEYPADS AND KEYS

MAX 4 MAX 4

UR1Z

1 2 3 4

5 6 7 8

SERIAL EXPANSION

1 2 3 4PARALLELEXPANSION

5 6 7 8

UR1Z UR1Z UR1Z

UR1Z UR1Z UR1Z UR1Z

MAX 1

EXPAN

SIO

N

MP105

KP100 DK2000M

ES100

EP100

SER

IAL

LIN

E

16

Control Unit

MP105 cod. MP9700111Wire control unit suitable to make small and medium size systems with 4 inputs expandable up to 12.

Control unit suitable to make small size system provided with 4 alarm zones •programmable as instantaneous, delayed, last exit, chime, withProgrammable part set in 2 groups•1 auxiliary input programmable for theft, panic, technological, fire, alarms•1 system self protection input.•1 mechanical key input•Setting/unsetting through built-in keypad, remote keypad, built-in electronic •key module, mechanical key.4 different codes are available: master user’s, user’s 2, engineerings, •telemonitoringWarning for: network presence, battery low, system status, tampering, open •inputs, inputs disabledEntry time, exit time, alarm time adjustable•CHIME FACILITY: possibility to enable, when the system is off, the sound of •a buzzer when a door or window opensAlarm count for each input (programmable)•Serial/parallel expansion: 1 max•Remote keypoints for electronic keys: 4 max.•Remote keypads: 4 max.•Allocable battery: 12 Vdc - 6 Ah•Power supply: 1,1 A•Dimensions (H x W x D): 345 x 240 x 79 mm•

Control Items

KP100 cod. KP2100211Backlit remote keypad

Remote keypad connected through dedicated serial line; featuring segment •display and warning leds.4 remote keypads can be installed as a maximum. •Dimensions (H x W x D): 108 x 140 x 45 mm. •

DK2000M cod. DK2000111Key reader for electronic digital key (black)

Key reader connected through dedicated serial line•White version code DK2000M/B - DK2400111. •Dimensions (H x W x D): 40 x 20 x 50 mm. •

DK20 cod. DK1700111Electronic digital key

Programmable key to receive a code (more than 4 milliards of combinations •available) generated by the control unit at random. Therefore, the number of keys that can be programmed with the same code is unlimited.Through the electronic key DK20 it is possible to enable/disable the system •totally or partially.


WIRE ALARM SYSTEMS

MP105

KP100

DK2000M

DK20

17

Expansions

ES100 cod. MP73101118 serial input extension unit

Expansion from 8 alarm zones,Takes a BUS on output for connecting the •interface modules which can be placed inside the detectors (UR1Z) and capable of taking back to the control unit the alarm and tamper information for every detector.Inputs of parallel expansions are programmable as instantaneous or delayed •and they can be memorized, excluded and associated to the managed sectors.The expansions are connected through dedicated serial line•

EP100 cod. MP72101118 parallel input extension unit

Allows traditional detector connection (parallel).•Inputs of expansions are programmable as instantaneous or delayed and they •can be memorized, excluded and associated to the managed sectors.The expansions are connected through dedicated serial line•

UR1Z cod. MP6110111Serial interface module for ES100.

It can be placed inside the detectors •

Accessories

IV 4Z cod. MP9610111Interface board equipped with 4 storable alarms inputs and 4 electric outputs, one for each input.The board transforms the fast signals coming from equipment such as vibrators, shutter sensors, etc into signals manageable by alarm control unit

CP 4F cod. MP5900111Plastic Box

Prearranged to contain ES100, EP100, and IV4Z modules. •Dimensions (H x W x D): 189 x 110 x 30 mm.•

CP8Z cod. MP7400111Plastic Box

Prearranged to contain ES100, EP100, and IV4Z modules. •Dimensions (H x W x D): 245 x 185 x 70 mm.•


WIRE ALARM SYSTEMS

ES100

EP100

CP4F

CP8Z

IV4Z

18

MP106TGV SYSTEMWIRE ALARM SYSTEM

19

FOR SMALL SIZE ALARM SYSTEMSThe MP106 system permits to manage 4 zones of alarm in the base version, and reaches up to 28 with optional expansion, or using the alarm zones present on each keypad or on each elec-tronic reader. It is possible to part set the system in 3 sectors. MP106 is manageable through remote keypad and/or electronic key connected to the serial line. The alarms can be transmitted on the telephone line with main communication protocols or through pre-recorded messages thanks to the voice synthesis. The system can be directly uploaded or downloaded by PC, through USB interface and it is also Tele-manageable remotely or via modem.

MP106TG/V: FROM 4 UP TO 28 INPUTS

WIRE ALARM SYSTEMS

1

CONTROL UNIT INPUTS

CONTROL ITEMS

4 KEYPADS MAX

UR1Z

1 2 3 4

5 6 7 8

SERIALEXPANSION ES100

1 2 3 4PARALLELEXPANSION EP100

5 6 7 8

UR1Z UR1Z UR1Z

UR1Z UR1Z UR1Z UR1Z

2 3 4

MAX 4

1

2

1

2

MAX 1

EXPAN

SIO

N

1

2

WIRELESSEXPANSION ER20WL

MP106TGV

KP106KP100D DK2000M

20

PROGRAMMABLE PART SET

WIRE ALARM SYSTEMS

GROUP 1

GROUP 2

GROUP 3

The system can be subdivided into 3 independently armed partitions.

REMOTE CONTROL - ALARM TRANSMISSION

USB connection (option)

Telephone Line

Remote Control

Remote Surveillance

Vocal Message

FASTLINK SOFTWARESYSTEM LOCALLY PROGRAMMABLE FROOM PC OR REMOTELY PROGRAMMABLE VIA MODEM OVER TELEPHONE LINEData uploading and downloading through a dedicated easy-to-use, user-friendly running over Windows. The same software is already in use for remote management of other Elkron Systems. This software permits to record and classify customers, systems and operators. It also permits the following: remote control panel programming, control panel program downloading, program verification and editing, program uploading to control panel, system event log downloading, real time checking of system, input, output, battery and fuse status.

21

Alarm Control Unit

MP106TG/V cod. MP9K00111(A) GB/E/PMP106TG/V cod. MP6K00111(C) I/F/DWire control unit for medium size plants equipped with 4 zones expandable up to 28.

Wire control unit for small size plants equipped with 4 zones max + 1 tamper •input + 1 mechanical key input. Expandable up to 28 zones + zones 24H + 4 AUX2 programmable alarm outputs: 1 open collector electric outputs and 1 relay •output with free exchange.Inputs can be partialized into 3 sectors•Possibility of controlling up to 4 readers, 4 keyboards and 4 expansions for •inputs/outputs via dedicated serial line ( 4 conductors)8 supplementary alarm zones + 1 tamper input + 1 auxiliary input in every •input expansion which may be of parallel type (EP100) or serial type (ES100). Every expansion is also equipped with 4 open collector electric outputs. The inputs can be further expanded through the wireless expansion ER20WL.2 additional alarm zones in every reader and in every remote keyboard•Programmable zones such as THEFT ( instant, delayed, last output, GONG), •Technologic, Fire, Silent panic, panic with sirens.Activation and deactivation via LCD display remote keyboard (with clear •message visualization), led remote keyboard, integrated electronic key, mechanical key.Signalling of :general alarm, failure, mains presence, low battery, plant status, •tamper alarm,inputs open, inputs cut off. Signalling is provided by means of leds and/or display.8 user access codes are available: MASTER code, installer code, remote •surveillance code, user code 2, 5, 6, 7 and 8.Max 64 events can be memorized.•Alarm transmission integrated in the control unit with 6 23-digit telephone •numbers communicator Multiprotocol digital transmission on 8 programmable channels. Voice transmission with 9 messages (1 base message + 8 alarm messages)Programmable with KP100 led keyboard and KP100D keyboard.•Programmable through local/remote PC and Fast Link software.•Programmable commutating lock functions with open zones and zone self-•bypassing.Max length of unit-peripheral serial line: 500 meters (2x0.75 cable sect.for •feeder + 2 x 0.22 x data).Degree of protection provided by casing: IP30/ IK 02.•Allocable battery (plastic box): 12 Vdc 2,2 Ah.•Switching power supply: 1 A.•Dimensions (H x W x D): 245 x 185 x 70 mm.•


WIRE ALARM SYSTEMS

MP106TG/V

22

Control Items

KP106 cod. KP3500111Remote keypad

Remote keyboard connected on dedicated serial line•Max 4 keyboard installable•Degree of protection provided by casing: IP30/ IK 02.•Dimensions (H x W x D): 108 x 140 x 45 mm.•

KP100D cod. KP2200111Backlit remote keypad with LCD display.

Remote keyboard connected on dedicated serial line, equipped with •16-character display with clear message signalling and signalling leds.2 on-board additional alarm zones. •Max 4 keyboard installable•Degree of protection provided by casing: IP30/ IK 02.•Dimensions (H x W x D): 108 x 140 x 45 mm.•


Reader connectable on dedicated serial line.•Max number of readers connectable to MP110 system: 4.•Max number of programmable DK20 keys Unlimited.•White version code DK2000M/B - DK2400111. •Dimensions (H x W x D): 40 x 20 x 50 mm.•



Software for remote control

FAST-LINK cod. SW1300111Data uploading and downloading through a dedicated, easy to use, user-friendly software running under Windows™

MODEM cod. CT3900113External modem to connect to PC for telemonitoring functions


WIRE ALARM SYSTEMS

KP106

DK2000M

DK20

KP100D

2° level

2° level

2° level

23

Expansions







Accessories

IT USB cod. MP9H10111Interface module for connecting the control unit to the PC

MR 02 cod. MP79101112 relais module for TTL o OPEN COLLECTOR NH/NL electrical outputs



WIRE ALARM SYSTEMS

ES100

EP100

IV4Z

2° level

24

MP110 SYSTEMWIRE ALARM SYSTEMS

25

FOR MIDDLE SIZE ALARM SYSTEMSIt is ideal for the device of medium extension, the MP110 system permits to manage 8 zones of alarm in the base version, and reaches up to 56 with optional expansion, or using the alarm zones present on each keypad or on each electronic reader. It is possible to part set the system in 3 sectors. MP110 is manageable through remote keypad and/or electronic key connected to the serial line. The alarms can be transmitted on the telephone line with main communication protocols or through pre-recorded messages thanks to the optional voice synthesis card. The system can be directly uploaded or downloaded by PC, through RS232 serial door and it is also Tele-manageable remotely or via modem.

MP110: FROM 8 UP TO 56 INPUTS

WIRE ALARM SYSTEMS

1

CONTROL UNIT INPUTS

CONTROL ITEMS

4 KEYPADS MAX

UR1Z

1 2 3 4

5 6 7 8

SERIALEXPANSION ES100

1 2 3 4PARALLELEXPANSION EP100

5 6 7 8

UR1Z UR1Z UR1Z

UR1Z UR1Z UR1Z UR1Z

2 3 4 5 6 7 8

MAX 4

1

2

1

2

MAX 4

EXPAN

SIO

N

1

2

WIRELESSEXPANSION ER20WL

MP110

KP100KP100D DK2000M

26


WIRE ALARM SYSTEMS

GROUP 1

GROUP 2

GROUP 3



USB connection

Telephone Line

Remote Control

Remote Surveillance

Vocal Message

FASTLINK SOFTWARESYSTEM LOCALLY PROGRAMMABLE FROOM PC OVER RS232 LINE OR REMOTELY PROGRAMMABLE VIA MODEM OVER TELEPHONE LINEData uploading and downloading through a dedicated easy-to-use, user-friendly running over Windows. The same software is already in use for remote management of other Elkron Systems. This software permits to record and classify customers, systems and operators. It also permits the following: remote control panel programming, control panel program downloading, program verification and editing, program uploading to control panel, system event log downloading, real time checking of system, input, output, battery and fuse status.

27

Alarm Control Unit

MP110 cod. MP1A00211Wire control unit for medium size plants equipped with 8 zones expandable up to 56.

Wire control unit for small and medium size plants equipped with 8 zones •max + 1 tamper input + 1 mechanical key input. Expandable up to 56 zones + zones 24H + 4 AUX5 programmable alarm outputs: 4 open collector electric outputs and 1 relay •output with free exchange.Inputs can be partialized into 3 sectors•Possibility of controlling up to 4 readers, 4 keyboards and 4 expansions for •inputs/outputs via dedicated serial line ( 4 conductors)8 supplementary alarm zones + 1 tamper input + 1 auxiliary input in every •input expansion which may be of parallel type (EP100) or serial type (ES100). Every expansion is also equipped with 4 open collector electric outputs. The inputs can be further expanded through the wireless expansion ER20WL.2 additional alarm zones in every reader and in every remote keyboard•Programmable zones such as THEFT ( instant, delayed, last output, GONG), •Technologic, Fire, Silent panic, panic with sirens.Activation and deactivation via LCD display remote keyboard (with clear •message visualization), led remote keyboard, integrated electronic key, mechanical key.Signalling of :general alarm, failure, mains presence, low battery, plant status, •tamper alarm,inputs open, inputs cut off. Signalling is provided by means of leds and/or display.8 user access codes are available: MASTER code, installer code, remote •surveillance code, user code 2, 5, 6, 7 and 8.Max 64 events can be memorized.•Alarm transmission integrated in the control unit (MP110TG version) with 6 •23-digit telephone numbers communicator Multiprotocol digital transmission on 8 programmable channels. Optional voice transmission (with SV108+KV100 module) with 9 messages (1 base message + 8 alarm messages)Programmable with KP100 led keyboard and KP100D keyboard.•Programmable through local/remote PC and Fast Link software.•Programmable commutating lock functions with open zones and zone self-•bypassing.Max length of unit-peripheral serial line: 500 meters (2x0.75 cable sect.for •feeder + 2 x 0.22 x data).Degree of protection provided by casing: IP30/ IK 02.•Allocable battery (plastic box): 12 Vdc 6 Ah.•Switching power supply: 1,5 A.•Dimensions (H x W x D): 345 x 240 x 79 mm.•

MP110TG cod. MP2A00211Same as MP110 but with alarm transmission through communicator inte-grated.

Vocal transmission in option through SV108.•

MP110M cod. MP5A00211Same as MP110 but in metallic box and 2,2 A power supply.

Dimensions (H x W x D): 318 x 422 x 91 mm.•


WIRE ALARM SYSTEMS

MP110 - MP110TG/A

2° level

MP110M

2° level

28

Control Items

KP100 cod. KP2100211Backlit remote keypad with 2 led digit display.

Remote keyboard connected on dedicated serial line, equipped with 2 led •digits and signalling leds.2 on-board additional alarm zones. •Max 4 keyboard installable•Degree of protection provided by casing: IP30/ IK 02.•Dimensions (H x W x D): 108 x 140 x 45 mm.•


Remote keyboard connected on dedicated serial line, equipped with •16-character display with clear message signalling and signalling leds.2 on-board additional alarm zones. •Max 4 keyboard installable•Degree of protection provided by casing: IP30/ IK 02.•Dimensions (H x W x D): 108 x 140 x 45 mm.•






FAST-LINK cod. SW1300111Data uploading and downloading through a dedicated, easy to use, user-friendly software running under Windows™



WIRE ALARM SYSTEMS

KP100

DK2000M

DK20

KP100D

2° level

2° level

2° level

2° level

29

Expansions







Accessories

SV108 cod. CT3210111Vocal synthesis module

KV 100 cod. CT3410111Voice synthesis kit consisting of microphone and speaker

ILT100 cod. CT4210111Modulo di interfaccia alla linea telefonica.

IT USB cod. MP9H10111interface module for connecting the communicator (for MP110 control unit only) to the telephone line




WIRE ALARM SYSTEMS

ES100

EP100

IV4Z

2° level

30


31

FOR MIDDLE SIZE ALARM SYSTEMSThe MP120 system is an antitheft and safety alarm wire system suitable for individual users both in the residential, industrial or service industry fields. The inputs can be configured as unbalan-ced (N.C.), single-balancing and dualbalancing inputs. The control unit, inserters, keyboards and input/output expansions are connected with oneanother through a bus. The detectors, sirens and other signalling devices are, on the contrary, connected to the inputs and outputs available in the control unit and the other aforesaid devices. Using the bus makes cabling much easier and allows you to save money, since not all the connections need be terminated directly to the control unit. For instance, if you wish to ensure the antitheft feature as well as local actuation for an annexe (e.g. garage, warehouse, shot), you will just need to run the bus cable to the annexed building, and the bus cable shall be connected to an inserter (or keyboard) and an expansion to which the alarm detectors will be linked. The MP120 system may, if equipped with a communica-tor, send telephone, voice alarm messages with numeric protocol (to remote surveillance agen-cies); moreover, it may also be controlled remotely through the telephone (incl. mobile phones) and make use of remote assistance. The system is programmed through any of its keyboards, and also be connecting the control unit to a PC equipped with the Fast Link software, after the control unit has been equipped with the interface with the RS232 port.


WIRE ALARM SYSTEMS

1

CONTROL UNIT INPUTS

CONTROL ITEMS

MAX 4 KEYPADS

UR1Z

1 2 3 4

5 6 7 8

SERIAL EXPANSION

1 2 3 4PARALLELEXPANSION

5 6 7 8

UR1Z UR1Z UR1Z

UR1Z UR1Z UR1Z UR1Z

2 3 4 5 6 7 8

1

2

1

2

MAX 4

EXPAN

SIO

NS

1

2

MAX 4

WIRELESSEXPANSIONER20WL

MP120

KP100KP100D

DK2000M DK3000M

ES100

EP100

32


WIRE ALARM SYSTEMS



SOFTWARESYSTEM LOCALLY PROGRAMMABLE FROM PC OVER USB LINE OR REMOTELY PROGRAMMABLE VIA MODEM OVER TELEPHONE LINE.Data uploading and downloading through a dedicated, easy-to-use, user-friendly software running under windows 3.1 or windows. the same software is already in use for the remote management of other elkron systems (WL31). This software permits to record and classify customers, systems and operators. It also permits the following: remote control panel programming, control panel program downloading, program verification and editing, program uploading to control panel, system event log downloading, real-time checking of system, input, output, battery and fuse status.

1

2

3

4

56

7

8

USB connection

Telephone Line

Remote Control

Remote Surveillance

Vocal Message

33

Control unitsMP120 cod. MP0400211Expandable (up to 56 zones) control unit with communicator (in option) and pc up/down loading via usb and modem

Control panel is provided with 8 inputs with uncoded assignment + 1 24h •input + 1 keyswitch input. It is expansible up to 56 inputs + 5 24h inputs + 4 AUX inputs. It is programmable with LCD keypad KP120, local/remote PC and Hi-Connect •software.It is provided with 5 programmable alarm outputs: 4 open collector electrical •outputs and 1 relay output with free exchange.It has the capability to split inputs into 8 partitions that can be freely clustered •in 3 areas.It has the capability to manage up to 4 key readers (independently of either •DK2000M or DK3000M model), 4 keypads and 4 input/output expansions by dedicated serial line (with 4 leads). It is provided with 8 alarm additional inputs + 1 tamper input + 1 auxiliary •input at each input expansion, which can be of either parallel (EP100) or serial (ES100) type. Each expansion has also available 4 open collector electrical outputs.It has 2 alarm additional inputs at each key reader DK2000M and at each •remote keypad.It has inputs programmable as BURGLARY (instantaneous, delayed, last •output, GONG), Technological, Fire, silent panic, panic with sirens.Commissioning and decommissioning is through LCD remote keypad (with •inputs and messages uncoded assignment and display), integrated key, proximity reader, keyswitch.It provides following signals: general alarm, failure, network present, battery •low, system status, tamper alarm, inputs open, inputs excluded. Signals are provided through leds and/or displays.It has available 8 access codes: MASTER, Fitter, Watchman, Users 2, 5, 6, •7, 8.Up to 250 events can be stored in EEprom (non volatile) memory.•Alarm transmission is integrated at control panel (version MP120TG) with •communicator with 6 23-digit telephone numbers. Digital transmission is of multi-protocol type. It has available an optional vocal transmission (with module SV108 + KV100) with 15 messages (1 basic message + 14 messages for alarms), as well as telephone calls cycle locking capability from remote location with DTMF code.It has entry locking programmable functions in presence of open inputs and •inputs self-exclusion.It has daily and weekly time-table programmers with the capability to activate/•deactivate partition and/or outputs. It has also the capability to put off (1 hour) time-table programmer activation with pre-entry signal (5 min), 4 programming tables (for commands).Max length of unit-peripheral serial line: 500 meters (2x0.75 cable sect.for •feeder + 2 x 0.22 x data).Degree of protection provided by casing: IP30/ IK 02.•Allocable battery (plastic box): 12 Vdc 6 Ah.•Switching power supply: 1,5 A.•Dimensions (H x W x D): 345 x 240 x 79 mm.•

MP120TG cod. MP2H00211Same as MP120 but with alarm transmission through communicator integra-ted in the control unit

Vocal trasmission in option through SV108 unit.•


WIRE ALARM SYSTEMS

MP120 / MP120TG

2° level

34

Control units

MP120M cod. MP3H00211Same as MP120 but in metallic box and 2,8A power supply.

Dimensions (H x W x D): 318 x 422 x 91 mm•

MP120M/TG cod. MP4H00211Same as MP120TG but in metallic box and 2,8A power supply.


Control Items


Remote keyboard connected on dedicated serial line, equipped with •16-character. Inputs and messages clear naming and visualisation.2 on-board additional alarm zones. •Max 4 keyboard installable•Degree of protection provided by casing: IP30/ IK 02.•Dimensions (H x W x D): 108 x 140 x 45 mm. •





DK3000M cod. DK3000111Proximity reader for transponder key DK30

The device features 4 signalling LEDs (one for the system status, three for •the area or sector status).Dimensioni (H x W x D): 40 x 20 x 50 mm•

DK30 cod. DK3500111Transponder key for full or partial system actuation and deactivation.


HI-CONNECT cod. SW2400111Software for computerized local programming and remote control of the MP120 control unit.

MODEM cod. CT3900113External modem to connect to PC for telemonitoring functions.


WIRE ALARM SYSTEMS

MP120M / MP120MTG

DK2000M

DK20

KP100D

DK3000M + DK30

2° level

2° level

2° level

2° level

35

Expansions







Accessories



ILT100 cod. CT4210111Modulo di interfaccia alla linea telefonica.

IT USB cod. MP9H10111interface module for connecting the communicator (for MP110 control unit only) to the telephone line




WIRE ALARM SYSTEMS

ES100

EP100

IV4Z

2° level

36


37

THE INTERACTIVE, MULTIMEDIA AND REMOTE CONTROLLED SYSTEM Elkron introduces MP508, the first security system of the new SIM 500 series. This system features 8 fully programmable zones (expandable up to 64), is both interactive and multimedia, and it can be fully remote controlled thanks to the unique Hi-Connect software. The system allows integration of several devices for home security and automation, like audio/video controls, safety sensors, personal emergency care, etc. MP508: state-of-the art technology for the ultimate innovation, to ensure protection beyond security.

Total Performance Ensuring SimplicityThe system performs a wide range of advanced communications, allowing to monitor and con-trol the security either from an internet website or by any touchtone phone including the mobile phone, hearing a system status report at home or from anywhere around the world. The Elkron-developed unique Hi-Connect software makes it possible to remotely control, program (upload/download) and fully check the system, and allows the additional feature to store/backup the en-tire system programming into a USB key. Moreover, the on-site system programming, including the set-up and test of all the peripherals, is autonomously and easily done by the control panel without the need of further operations on the single devices. This simplifies installation and main-tenance, saving time and money.

High System FlexibilityIn addition to its simplicity to install and set-up, the new MP508 system is very fast and flexible – two outstanding strengths. The 8 input zones (which can be expanded up to 64) make the system perfectly suitable for small to medium premises, whereas the possibility to integrate up to 4 video cameras allows the most advanced performances of alarm verification and video surveillance.The “speak-and-listen” performances of the keypads allows the system to activate a communication and make the “environment monitoring” by remote, listening what’s going on in the protected area, or to give the possibility to start an indoor/outdoor voice communication.

Tailored Features for Outstanding SecurityThe new MP508 system has been designed and manufactured to offer such a wide range of fe-atures that can easily adapted, or “tailored”, to satisfy most of the possible integrated securityneeds. In addition to the traditional intrusion detection functions, the MP508 system can per-form a number of functions for security that’s unlike anything else in its range: intrusion detec-tion, alarm verification, video surveillance, fire detection, gas leak prevention, flooding prevention, personal emergency, rescue, etc.

Telephone/mobile phone controlSimple, full system control. Easy, practical voice menu. Immediate identification, in case of phone calls, of the area concerned by the alarm signal. The environment listening function can also be activated with the “speak-and-listen” keyboards.

Hi-connect remote control softwareControl unit remote programming, check and control. Provision for transferring the program-ming to a USB key.

Web management through the pc or mobile phoneE-mailing the images of the area concerned by the alarm. Actuation of the image sending service even at the user’s request or through programming.

Connection with the security service Through numeric protocols.

Videosurveillance function Thanks to 4 analog video inputs for camera actuation.

Max. System capacity •64inputs•27outputs•8sectors•4areas•8keyboards•16readers•32codes•32keys•1000historyevents

Remote control through pstn and gsm telephone networks With provisions for sending SMS, vocal and numeric alarms.

Dmtf control management With vocal guide, as well as management of the environment “speak-and-listen” and caller ID (caller identification) functions.

Sms control managementprovision for activating the service by sending SMS’s.


WIRE ALARM SYSTEMS

38


WIRE ALARM SYSTEMS

GSM PSTN USB LAN/WAN

ALARM VOICE RECEPTIONDTMF USER

REMOTE CONTROL (VOCAL GUIDE)

SMS CONTROLS

SMS ALARM RECEPTION

CALLER ID

VIGILANCE SERVICESDIGITAL PROTOCOLS

EP508INPUT EXPANSION8 INPUTS1+2 OUTPUTSMAX 7 EXPANSIONS

MP508TGCONTROL UNIT WITH 8 ALARM INPUTSEXPANDABLE UP TO 64 WITH PSTN COMMUNICATORSYSTEM PART SET UP TO 8 SECTORS4+2 ALARM OUTPUTS

16 READERS MAX 8 KEYPADS MAX

DK500M-PPROXIMITYKEY READER2 PROGRAMMABLEINPUTS

DK500M-EELECTRONICKEY READER2 PROGRAMMABLEINPUTS

KP500DVLCD KEYPADWITH SPEAK-LISTEN FUNCTION

KP500DLCD KEYPAD2 PROGRAMMABLEINPUTS

SECURITY RESULTANT FROM CONSTANT CONNECTION:THROUGH THE TELEPHONE, THE WEB, AND HI-CONNECT

BUS

39

MAIN CHARACTERISTICS• Fast system start-up: o acquire the devices it is not

necessary to set the addresses with dip-switch. It is sufficient to press their programming button and the control panel will send to the device the assigned ad-dress and the factory settings.

• Service keypad: it is possible to connect to the con-trol panel a temporary service keypad, by a dedicated connector, for programming or maintenance. The service keypad can be disconnected from the system at the end of the installation, without needing to pro-gram again the control panel.

•Advanced technological alarms: when a “technologi-cal” event occurs, for example the flood of a room, the system can activate specific actions, as for example the water electric valve closing, and also sends the corresponding alarms. In order to manage different situations, the system is provided with three outputs management types.

•Rescue call: with a dedicated input it is possible to send a phone call and inform the receiver with a vocal message concerning the help request. If the system is provided with a KP500DV vocal keypad, afterwards it will be possible to call the control panel and commu-nicate in hands-free mode with the person that issued the alarm.

•Door opener: it is possible to drive an electric lock with an output configured as “door opener”. In this way it is possible to limit the access in specific areas only to authorized personnel. Date, time and user that re-quested the opening are stored in the control panel.

•Savings on call cost: by using the GSM telephone number identification by the control panel, it is pos-sible to generate a command on a specific output. In this way it is possible, for example, to open the automatic gate of the vehicle entrance, by calling the control panel from the car with the mobile and han-ging up after the first 3-4 rings, without entering the code.

•Wide input configuration capability: every single in-put can be configured according to type (seven) and configuration (twenty). Every single input of control panel, keypad, expansion, reader, can also manage Elkron VSD3 and MMZ01 inertial detectors and El-kron MF01 and MF02 rolling shutter detectors.

• Vocal help for remote management: the system helps the user in the telephone management with vo-cal messages.

•Service messages playback: capability to give the user diagnostic information with vocal hands-free messages from the vocal keypad.

•Video function: with a video gateway connected to the MP508TG control panel it is also possible to exa-mine the images of four analogic cameras. Images recording, activated by the selected system events, can be sent to PC, mobiles, smartphone, etc, with e-mail.

•Advanced alarm vocal calls: capability to send vo-cal calls with a specific message for single partitions and/or inputs.

•Automatic functions: with a time programmer em-bedded in the control panel, it is possible to set a weekly list of automatic commands. Commands types can be ACTIVATE or DEACTIVATE and can be used, for example, for a garden irrigation system or a boiler for heating. Besides the above mentioned functions, that can be defined as service functions, it is also possible to manage automatically the alarm system arming or disarming, or set time bands in which a specific code or key are not enabled. For example, during holidays the domestic help key or code is disabled.

LAN/WAN

RS232 RJ45

4 ANALOG VIDEO INPUTS (COAX)

VIDEOGATEWAY 4T

ETHERNETINTERFACE

MODEMROUTER

MAILSIGNALLING

VIDEO CONTROL BY MOBILE PHONE AND

PC

USB KEY

REMOTE MANAGEMENTSOFTWARE

40

Alarm control units

MP508TG cod. MP4K00211Expandable Control panel (64 inputs max) with integrated telephone com-municator, Remotely controlled via internet, Remote video control, Video warning as a result of alarms

8 programmable inputs + 1 sabotage input, basic; expandable up to 64•6 programmable outputs (2 relays + 4 OC), basic; expandable up to 27 •System part set into 8 partitions•Management of 32 user codes (from 4 to 6 digits) and 32 keys (electronic •DK30 or proximity DK50)History file storing 1000 events•Weekly time programmer, 8 daily controls•1 field bus for the connection of: max. 8 display keypads, max. 7 expansions, •max. 16 key readers Direct connection for service keypad•Telephone transmission on 12 telephone no., through numerical protocols •and/or modem. Voice synthesis interface: factory recorded messages for each system input/•partition/event, sound BUS for voice functions and ambient listening through keypad (KP500DV), auxiliary voice guide for DTMF remote controls.GMS interface with antenna which can be allocated inside the control panel •TCP/ IP interface for control panel connection with LAN or ADSL modem. •Web video 4T interface (up to 4 video cameras) for connection with LAN or •ADSL modem. USB interface for connection with local programming PC•USB pen drive interface (standard type) to save and retrieve system •programming HI CONNECT software application for programming and remote management •(compatible with Windows Vista ®) In compliance with EN 50131 -1 •Rhos compliant •Allocable battery : 12 Vdc - 7 Ah•Switching Power supply : 1.5 A•Dimensions (H x W x D): 238 x 340 x 90 mm•

MP508M/TG cod. MP8K00211Like MP508TG but with metal container.

Like MP508TG but with metal container. •Allocable battery : 12 Vdc - 17 Ah•Switching Power supply : 4 A•Dimensions (H x W x D): 350 x 490 x 145 mm•External antenna for GSM module to be fastened on container top rim •


WIRE ALARM SYSTEMS

MP508TG

MP508M/TG

41

Control Items

KP500D cod. KP6000211Remote keypad with LCD alphanumerical display with 2 lines for 16 characters.

Back light, contrast and buzzer, adjustable.•3 alarm control keys.•User menu access with closed lid.•2 alarm inputs. •Dimensions (H x W x D): 140 x 115 x 28 mm. •

KP500DV cod. KP6100211Like KP500D, but with:

Connection with sound BUS (as an alternative for 2 alarm inputs). •Integrated microphone and loudspeaker.•Emission of recall voice messages. •Recording listening of alarm voice messages. •Remote ambient speaking/listening. •

DK500M-E cod. DK5000211Electronic key reader (mod. DK50)

5 LEDs: 4 LEDs to view system state + 1 alarm memory•2 inputs onboard, programmable •Compatible with whole range of Elkron civil electric line adapters. •Available in white color version DK500M-E/B cod. DK5100211•

DK50 cod. DK5400211Digital electronic key with univocal code (over 1099 billions of possible combi-nations)

ABS material•Possibility to customize (Kit DK30 50) •

DK500M-P cod. DK5200211Proximity key reader (mod. DK30)

5 LEDs: 4 LEDs to view system state + 1 alarm memory•2 inputs onboard, programmable •Available in white color version DK500M-P/B cod. DK5300211•

DK30 cod. DK3500111Proximity key 125 KHz (more than 281.000 billion of combinations)

ABS material •Degree of protection IP68 - IK08. •Possibility to customize (Kit DK30 50) •

KIT DK30-50 cod. KT9410111Color inserts to be fitted on DK50/DK30 keys for their customization


WIRE ALARM SYSTEMS

KP500D

KP500DV

DK500M-E

DK50

DK500M-P

DK30

42

Expansion

EP508 cod. MP7K00211Parallel expansion which can be connected with system BUS where it is pos-sible to connect traditional devices

8 inputs + 1 sabotage, programmable •3 outputs (1 relay + 2 electric), programmable•

Accessories

SV500I cod. CT5610111Voice synthesis board which can be connected with the control panel throu-gh the suitable connector (headphones provided)

Factory recorded messages for each system input/partition/event•Sound BUS for voice functions and ambient listening through keypad •(KP500DV) Auxiliary voice guide for DTMF remote controls•

IMG500 cod. CT5510111BI-BAND GSM module (900/1800 MHz)

IMG500 is the interface allowing to connect the MP508TG and MP508M/•TG control panel to the GSM network, for sending of alarm signalling and reception of remote commands. The interface is provided with a dual-band GSM transmitter/receiver (900/1800 MHz) and with an antenna to be installed in the control panel. If the control panel position does not ensure for the GSM module a sufficient field strength, it is possible to use the GSM 1 antenna (not provided). If the GSM module is used with the MP508M/TG metal control panel, it is necessary to replace the provided antenna with the GSM 2 antenna used in case of metal housing or to use GSM 1 antenna (both are not provided).

IT USB cod. MP9H10111USB interface.

IT-USB interface allows to connect a computer to the MP508TG or MP508M/•TG control panel for control panel programming.

IT USB/KEY cod. MP5K10111USB interface for connection to PC and to USB IT-USB/KEY keys.

The IT-USB/KEY interface allows to connect a computer to the MP508TG or •MP508M/TG control panel for control panel programming and a USB key (Pen Drive) for save and restore of the whole system programming.

CAVO X KP cod. CV3010111The cable for service keypad is used to connect the control panel to the •service keypad (KP500D or KP500DV, as you like), in order to carry out the system programming. The cable is provided with a connector compatible with the SERVICE connector of the MP508TG or MP508M/TG control panel motherboard.

MODEM cod. CT3900113External modem to be connected with the PC for remote management.

MODEM/ROUTER cod. CT5200111External modem/router suitable for gateway video applications


WIRE ALARM SYSTEMS

EP508

SV500I

IMG500

ITUSB

43

Accessories

HI-CONNECT cod. SW2400111Software for ELKRON control panel configuration, user friendly and easy to •understand, working in Windows™ operating environment. Through this software it is possible to record and classify clients, systems and operators. In addition, it is possible to remotely program alarm control panels, acquire the resident configuration, check it, change it and then load it again in the control panel (up/downloading), acquire the system event memory, check in real time the system state, the input and output state, the battery and fuse state. Integrated function for technical alarm reception (modem needed).

VIDEO GATEWAY 4T cod. VD0800111Video module with 4 inputs for analogue video cameras

The Video gateway is used to include in the system up to 4 analogic cameras, •whose images can be seen in real time, or recorded and then examined on PC, mobile and other devices (attached to e-mail sent by the gateway).The images recording is activated by the selected system events (intrusion, •time commands, remote commands etc.). Images resolution is 640 x 480 pixel max. For connection to Internet is available an Ethernet connector, that allows to connect the video gateway to a LAN network or a modem or an ADSL router. The video gateway is connected to the MP508TG or MP508M/TG control panel with a dedicated interface.The connection of the Video gateway to the control panel is alternative to the •connection of the Ethernet interface.Dimensions (H x W x D) 238 x 340 x 90 mm. •

INTERFACCIA ETHERNET cod. IT1200111Interface which can be connected with the control panel

Interface which can be connected with the control panel set for the connection •with LAN or ADSL modem (not provided. System management through HI CONNECT software application).

ANTENNA GSM 1 cod. AN0300111Remote antenna

GSM 1 remote antenna is provided with bracket, screw anchors for wall •mounting and 5 m of cable assembly with SMA-M connector compatible with GSM IMG500 module. It is useful when the control panel position does not ensure for the GSM module a sufficient field strength.

ANTENNA GSM 2 cod. AN0400111Remote antenna for metal housing

Antenna for metal housing with SMA-M connector compatible with the GSM •IMG500 module. It must be used with the IMG500 module in the MP508M/TG control panel with metal housing.


WIRE ALARM SYSTEMS

VIDEO GATEWAY 4T

44


45

MULTI-FUNCTIONAL AND MULTI-USER REMOTE MANAGEABLE SYSTEM A family of control units with 8 base zones, expandable up to 64 or until 256 with part set up to 12 groups. Here is the Elkron MP200 system for extended installation systems. In fact, the control units MP200 are expandable on serial line and have a complete range of common de-vices and for the plant management. The system is totally Remote manageable thanks to the keypad with LCD display, optic-digital key reader on the serial line and access with electronic me-chanical key. The weekly date-time scheduler on monthly and annual base, permits the automatic enabling and deactivation of sectors. The hour calendar, instead, allows a complete recording of chronological event log of 300 or 1000. The use of the modem communicator permits remote Tele-management, while RS232 door offers Tele-management and local programming. MP200 is really a complete system, endowed with telephonic transmission with vocal synthesis, and it can also be used by up to 24 key readers, 12 partialisers and 24 remote keypads.


WIRE ALARM SYSTEMS

1

CONTROL UNIT INPUTS

CONTROL ITEMS

POWER SUPPLY UNITS1 2 3 4

RELAIS MODULE

5 6 7 8

2 3 4 5 6 7 8

1 2 3 4

4 INPUTEXPANSION

8 INPUTSEXPANSION

OUTDOORSOUNDERHPA702LG

TECHNICAL CONTROLS

KP200DDK4000M DKZ4/4000M

EP200/4Z

EP200/8Z

DKR4

46

EASY TO USEThe guided menu on the keypad display allows an easy use with regard to the system programming and management. The clear writing of the name of the single zones (e.g.IR WAREHOUSE) , single codes and/or keys (e.g. JOHN DOE) and single sectors (e.g. OFFICE AREA) enables the final user to identify quickly and univocally the alarm or operation to be carried out.

MULTIFUNCTIONThe zones and outputs are individually programmable to manage alarms or different conditions such as theft, 24H theft, tamper, robbery, fire, technical alarm, technical control, social alarm, On-Off, failure and other functions.

MULTI USERPossibility of action at the same time from different key readers and/or diffe-rent keypads. Management of sub-systems (separated plants) with one control unit, each of which can be in turn subdivided into one or more sector.

REMOTE MANAGEMENTThrough the Personal Computer and the Fast-Link Telemanagement software the engineer can remotely program and check the different systems installed through transmission (modem) on telephone line. All programming data can be loaded and unloaded, zones can be bypassed and reentried, output and battery tests can be made, the situation of the plant status and of the event log can be requested, output and battery tests can be made , etc.

ALARM TRANSMISSIONThe MP200 system can transmit alarm conditions on telephone line program-mable in three different ways: via modem to a centre equipped with personal computer and Fast-Link software; with DTMF numeric protocol (chosen among the various available on the board); to a telemonitoring centre with messages recordable in voice synthesis. In the modem and numeric transmission (for tho-se protocols allowing it) the data transfer to the receiving centre requires the “point-point” information, i.e. relevant to every single alarmed zone.

MODEM - COMMUNICATOR STM200Module for alarm telephone transmission, for remote control and for system remote programming.

CLOCK CALENDAR AND TELEPHONE PROGRAMMERThe MP200 system is provided with calendar clock for the chronological clas-sification of the events and the control of the time programmer. This program-mer offers a high management flexibility through different and fully program-mable daily and weekly timetables. In addition to the antitheft system arming/disarming,it can be associated to other functions, such as technical control.


WIRE ALARM SYSTEMS

47

Alarm control units

MP200/64 cod. MP6300111Expandable (up to 64 zones) microprocessor based high security system

Microprocessor based control unit provided with 8 zones, expandable up to •64 using two kind of expandable cards: 4 zone input/3 outputs and 8 zones input/6 outputsFully programmable zones, as immediate, timed, final door, panic, technical, •social alarm, pre-alarmProgrammable part set up to 12 groups. •Single and double input balancing•Fully programmable facilities: AND facility, COURTESY LIGHT facility, PRESENCE •SIMULATION facility, CHIME facilityUp to 16 remote keypads: LCD message keypads with backlight•Plain language display of system conditions and messages, plain language •instructions for system operations. Up to 16 integrated optical key readers and up to 8 partialiser for full ON/•OFF system control by optical keyAccess control function through DK40 optical keys•Clock calendar function. •Timer programmer for various events, such as group ON/OFF, access •control, patrol passage, technology output switchingUp to two independent RS485 serial bus lines for system expander control•One built-in RS232 serial port for local PC or printer connection•Plug on modem/digital communicator and speech dialler•System locally programmable from a PC over RS232 line or remotely •programmable via modem (in option) over telephone line: data uploading and downloading through a dedicated software running under WINDOWSAllocable battery: 12Vdc - 18Ah. •Power supply: 2,8 Ah.•Dimensions (H x W x D): 318 x 422 x 91 mm.•

MP200/64-OM cod. MP6200211As above but in larger case suitable for a 12 V - 27 Ah battery


MP200/256 cod. MP6500211As above with the following differences:

Expandable up to 256 zones.•Programmable part set up to 24 groups.•Up to 24 remote keypads.•Up to 24 integrated optical key readers and up 16 partialisers.•Up to three independent RS485 serial bus lines for system expanders •control.

MP200/256-OM cod. MP6500211As above but in larger case suitable for a 12 V - 27 Ah battery



WIRE ALARM SYSTEMS

MP200/64

MP200/64-OM

2° level

48

Control Items

KP200D/I cod. KP2700211Backlit remote keypad with 16 digit LCD display for clear message visuali-sation

Integrated backlight LCD display, incorporated buzzer.•The device is used to programme and control the system, to which they may •be partially or totally associated (control and management of one or more sectors).Dimensions (H x W x D): 140 x 115 x 28 mm. •

DK4000M cod. DK2100211Reader for opto-digital key.

These are devices for optical/digital reading and decoding of DK 40 digital •keys. They are used for activating/deactivating relevant sectors each time a recognised optical key is introduced. They are fitted with 4 LEDs for signalling specific system events.They are addressed by rotary switches•It is available in White color version with code DK4000M/B.•

DK40 cod. DK0100211Opto-digital key (patented)

DKZ4/4000M cod. DK26002114 Inputs splitter.

These devices work in association with DK 4000M readers and are used for •partial activation/deactivation of associated sectors.They fit 4 keys, each of which is associated to a system sector, and 4 LEDs •for signalling sector statusThey are addressed by rotary switches•It is available in White color version with code DKZ4/4000M/B.•

Expansions

EP200/4Z cod. MP6700111I/O modules for connection on RS485 serial lines, providing 4 zones and 3 outputs (1 relay and 2 electric)

All zones and outputs may individually programmed as is the case with the •control unit. Concentrators are connected via an RS485 serial line and acknowledged via a programmable dip-switch address.The equipment is supplied in modules and is suitable for a range of locations: •in special cases (CP8Z), in the back-up supply units or even in the control unit case.A direct interface connector to the back-up supply units uses a serial BUS •line to convey trouble-shooting information (power failure, low battery, error) to the control unit.

EP200/8Z cod. MP6700111Same as EP200/4Z but with 8 inputs and 6 outputs (2 relais and 4 elec-tric)

The 4 electric outputs present on the EP200/8Z may become relay outputs •by installing a DKR4 module with direct coupling connettors.


WIRE ALARM SYSTEMS

KP200D

DK4000M

DK40

DKZ4/4000M/B

EP200/8Z

EP200/4Z

2° level

3° level

3° level

3° level

2° level

49

Communication

FAST LINK cod. SW1300111Software for Data uploading and downloading

Data uploading and downloading through a dedicated easy-to-use, user-friendly •running over Windows. The same software is already in use for remote management of other Elkron Systems. This software permits to record and classify customers, systems and operators. It also permits the following: remote control panel programming, control panel program downloading, program verification and editing, program uploading to control panel, system event log downloading, real time checking of system, input, output, battery and fuse status.


STM200 cod. CT4110211Modem Communicator

Telephone alarm transmission board for remote management and remote •programming of the system.

Accessories

DKR4 cod. DK0900211Relay circuit.

4-relay circuit with quick connector coupling. Can be used with EP200/8z, •DK41S.

IT485 cod. MP9110211Serial interface

RS485 serial interface for connecting remote keypads and/or commutators •and partialising devices.



IV 4Z cod. MP9610111Interface board equipped with 4 storable alarms inputs and 4 electric outputs, one for each input.The board transforms the fast signals coming from equipment such as vibrators, shutter sensors, etc into signals manageable by alarm control unit.


WIRE ALARM SYSTEMS

50

51

WIRELESSALARM

SYSTEMWL31 ......................pag. 52

WL20 ......................pag. 60

52

WL31 TWO-WAYWIRELESS SYSTEM

WIRELESS ALARM SYTEM

53

WL31 is an evolutionary total two-way wireless communication system. Thanks to Reply Techno-logy®, developed by ELKRON, all devices in the system are transceivers that constantly interface with the alarm unit to verify correct communication status. The exclusive, sophisticated protocol (synchronous, GSM type) ensures maximum security of communication under all conditions. All devices, including the alarm unit, are powered by long-life lithium batteries to ensure maximum autonomy. The system is therefore immune from interferences, power blackouts and can even work in locations where electrical power is not available.

WL31 WIRELESS SYSTEM

WIRELESS ALARM SYSTEM

VOCALMESSAGES TELEMONITORING

REMOTE CONTROL SMS MESSAGE

STM30 3.00IMG30

PS30Auxiliary

power supply*

LOCAL PC

MAX 32 DETECTORS

MAX 4 OUTDOORSOUNDERS

MAX 8TRASMITTERS

MAX 4 KEYPADS

* IN CASE OF USE OF GSM MODULE OR OTHER COMMUNICATION EQUIPMENT, YOU ARE ADVICED TO USE AN AUXILIARY PS30 FEEDER.

54



INNOVATION IN COMMUNICATIONS AND PROTOCOLSEach system device is provided with an intelligent radio module based on a transceiver with frequency synthesis, miniaturised and among the most sophi-sticated ones in the world. The module manages all circuits, including RTC (Real Time Clock), modem and antenna, which communicates towards the other ap-paratuses. The use of frequency band, channels, protocol, as well as any other aspect of communication are managed by the exclusive software which is the core of Reply Technology®.

Two-way radio communication is in narrow band frequency modulation (FSK-NB), splitting the 434 MHz band into a number of selectable channels in order to dynamically use those ones which are less susceptible to interferences, as well as, in general, less noisy. The choice of channels during installation or main-tenance steps is very simple and completely automatic, by quickly sweeping the band and choosing unused or less jammed channels.

WL31 system uses a synchronous type communication protocol akin to the one of GSM networks and provided with a developed communication encoding system. A so high communication protection level against simulations and in-telligent sabotages results, that WL31 system can also be used in medium to high safety systems. The structural versatility of this protocol also allows for even later extending the range of peripheral units: remote keyboards, outdoors detectors, etc. The innovative features of Reply Technology® and its exclusive protocol provide the control and peripheral units of WL31 system with high radio range and high communication reliability.

RADIO COMMUNICATIONThanks to Reply Technology®, all devices communicate bidirectionally•Transmission in 434 MHz band, with FSK-NB modulation•Very high immunity to interferences and jams•Band split into selectable channels•Self-test checking radio coverage for each channel, with choice of the most •suitable channelsSupervision with programmable time•Anti-jamming protection•Radio range over 300 m in free air•Synchronous protocol with communication protection and authentication:•

- dynamic protocol; - protocol variable in time; - authentication with 64 bit symmetrical double key (that can be deactiva-

ted); - crack proof protocol; - code reproduction (playback) proof protocol.

With system/sector (TC radio) on, detectors remain in standby condition:• - Detectors do not transmit and consequently do not consume without use;

- Detectors need no timed block after detection.

EXCLUSIVITYDevices sequential acquisition: after pre-arranging the control unit, just close each tamper contact at a time of those devices which must be entered into the system. Acquisition occurrence will be confirmed by the control unit through acoustic and visual signalling from LCD. Each acquired device, depending on its own typology, receives its own functional and protocol parameters via radio from the control unit. So, at acquisition procedure termination, system imme-diate use is available.

New tool checking radio communication (Patent Pending): after placing all devi-ces to desired position, the efficiency of radio communication with control unit can be checked in each device.During the procedure, the system operates with radio signal power intentionally reduced: therefore, check outcome positive in such conditions will assure that with nominal power maximum communication effectiveness is achieved.

55



SYSTEM CAPACITY AND STRUCTUREWL31 control unit•Infrared detectors via radio IR30WL/IR31WL•MM30WL magnetic contact detectors via radio, further provided with two •inputs for external auxiliary detectors that are also addressed as single de-tectors and can be programmed and named in plain language.F031WL smoke optical detectors•HP30WL outdoors sirens via radio•TX30WL / TX31WL remote controls via radio (versions with 3 or 5 keys/•Led) All apparatuses are supplied by lithium batteries.•

System maximum capacity:• Up to 32 detectors via radio, including IR30WL, IR31WL, F031WL and

MM30WL• Up to96 detectorswhich can be identified as single detectorswhere allMM30WLdetectorswithauxiliaryinputsareused(onecontactplus2inputseach)

• Upto8remotecontrols• Upto4externalsirens• Systemdivisibleinto4sectorsthatcanbefreelyprogrammedandnamedin

plain language.

FUNCTIONALITYMultifunctional control unit separately managing theft, fire, technological •eventsIntuitive and tree-structured menus for programming from keyboard in diffe-•rent selectable languagesSystem divisible into 4 sectors that can be freely programmed and associa-•ted to inputs/outputsUpto18accesscodeswithmax6digitseach•Historical memory with max 500 event capacity•Time-table programmer•Peripheral devices sequential self-acquisition•System self-configuration•Maximum flexibility in associating inputs, outputs and sectors•Capability to name inputs, outputs, sectors, codes and remote controls “in •plain language”Capability to program all system peripheral devices via radio allowing for mo-•difying the technical parameters of each peripheral device by operating:on control unit keyboard via special menu;•on remote PC via special ELKRON application software (unlike one-way sy-•stems where programming is to be made aboard each device).Various possibilities of signalling alarms via: internal siren, external HP30WL •sirens. PSTN communicator (STM30), GSM communicator (IMG30).

56

Alarm Control Unit

WL31cod.WL0100211Wireless control unit with two-way communication.

It manages burglar, fire and system failure events separately.•Up to 4 freely programmable partitions which can be associated to inputs •and outputs.Upto18accesscodes(upto6digitslong).•Event log capable of storing up to 500 events.•Programmable timer.•Sequential self-acquisition of peripherals devices.•System self-configuration.•Optional communicator modules (PSTN and GSM) for: •remote system management using special •ELKRON modules, various alarm •transmission methods: •voice, numeric protocols, modem, SMS messages.•Built-in keypad and LCD: 21 backlit buttons (2 line x 16 alphanumeric•characters). Inputs, outputs, sectors, codes and remote control can be named by the user.Wiredinputsandoutputs:2PGMrelayoutputs,2PGMwiredinputs.•I/O serial port forPC connection; it can be equippedwith:RS232 serial•module, USB “slave” serial module.Optional memory card connection for system data backup to removable •medium.High intensity internal siren with programmable functions.•Cabinet tamper for opening and removal.•Two 3.6V high capacity lithium thionyl chloride batteries (included) with smart •energy management function. Auxiliary main power option (PS30).•Radio coverage: up to 500 m line of sight•Dimensions(HxWxD):345x240x79mm.•

WL31TGcod.WL0200211Same as WL31 but with built-in communicator module: PSTN, numeric •protocols and voice synthesys.

Control Units

TX31WL/5cod.TX3500211Fully programmable five-button remote control

Remote control with 5 keys and relating two-colour LEDS, totally managed •by a microprocessor. All the operations associated with the keys (up totwo per key) and with the LEDS can be programmed from the WL31 control panel. Each key can also be personalised through coloured labels to make the choice of the associated control easier and the two-colour LEDS supply a direct visual answer to the controls. When it is acquired by the control panel, it is configured with pre-set parameters.The radio range is approx. 150 meters in open air and the communications •with the WL31 control panel are done using the Reply Technology®. Power is supplied by one 3V long lasting lithium battery which can be replaced by the user.



WL31 / WL31TG

TX31WL/5

2°level

2°level

IT-AI-3/2009-REV.0

57

Control Units

KP30WLcod.KP3700211ABS backlit bidirectional wireless keypad

KP30WL is a keyboard for internal areas, totally managed by a microprocessor, •whichisequippedwith11lightsignals,12alphanumerickeysand5“Function”keys for direct controls. These can be personalized with labels to make easier and evident the choice of the allocated control. All these keyboard elements can be radio programmed from the control panel.Signals are: controls, alterations, damages, system status, open and excluded •Inputs, maintenance and remote management operations.The radio range of the keyboard is approx. 300 meters in open air and •communications with the control panel are done using the Reply Technology®. The keyboard is equipped with protection from opening and from removal. When it is acquired by the control panel, it is configured with pre-set parameters.Power is supplied by two 3V lithium batteries which under normal condition •ofuse,enableuptoabout2yearsoflife.The keyboard automatically transmits an alarm of expiring batteries. To reduce •energy consumption to the minimum, the keyboard has a timed back lighting switch, through a specific twilight detector. It is automatically excluded when there is enough environmental light.Degree IP40 IK04.•Dimensions(HxWxD):138x106x35mm.•

Communication

STM30cod.CT5010211PSTN communicator module

STM30 is an optional telephone communicator which works as interface •between the control panel and the fixed telephone network (PSTN) for modem and DTMF communications, using vocal pre-recorded messages or a numeric protocol (for example ADEMCO®, IDP® etc.).Note: the communicator module is equipped with headphones to register/•listen to the vocal messages.

IMG30 cod. CT5110111GSM Dual Band module equipped with aerial

IMG30 is a GSM Dual Band module, equipped with aerial, which enables you •to use the mobile phone network instead of or as an integration of the fixed one, even offering the possibility to communicate via SMS messages.This can only be used if there is an STM30 module. SIM card is not •included.

HI-CONNECTcod.SW2400111Software for ELKRON control panel configuration, user friendly and easy to •understand, working in Windows™ operating environment. Through this software it is possible to record and classify clients, systems and operators. In addition, it is possible to remotely program alarm control panels, acquire the resident configuration, check it, change it and then load it again in the control panel (up/downloading), acquire the system event memory, check in real time the system state, the input and output state, the battery and fuse state. Integrated function for technical alarm reception (modem needed).

MODEMcod.CT3900113External modem to be connected with the PC for remote management.



KP30WL

2°level

IT-AI-3/2009-REV.0

58

Detectors

IR30WLcod.IR3B00211PIR detector, two-way wireless communication, with patented trifunctional emisferic lens.Threeselectablecoveragefield:maxrange18m(volumetriclens)•Entirely microprocessor controlled•Dual Piroelectric sensor•Programmable pulse counter•Programmable pulse counter•Two-way line of sight radio coverage: up to 300 m•Lithium battery powered (3V, included).•Dimensions(HxWxD):138x74x53mm.•

IRA31WLcod.IR5B00211Passive infrared two-way wireless communication detector with Fresnel cylindrical lens.Range:15mwithvolumetriclens.Coverage:108°.•Entirely microprocessor-controlled.•DUAL pyroelectric sensor.•Programmable pulse counter.•Diagnostic and TEST LEDs.•Two-way line of sight radio coverage: up to 300 m•Lithium battery powered (3V, included).•Dimensions(HxWxD):124x70x54mm•

IRA31WL/Pcod.IR8B00211Passive Infrared Detector with PET Immunity, two-way wireless communica-tion and Fresnel cylindrical lens. Range:15mwithvolumetriclens.Coverage108°.•Pet immunity (35 kg max).•Entirely microprocessor-controlled.•DUAL pyroelectric sensor.•Programmable pulse counter.•Diagnostic and TEST LEDs.•Two-way line of sight radio coverage: up to 300 m.•Lithium battery powered (3V, included).•Dimensions(HxWxD):124x70x54mm.•

MM30WLcod.MM6700211Magnetic contact, two-way wireless communication, entirely microproces-sor-controlled

Alarm and test led•Two external auxiliary detector inputs (addressable and programmable •from the alarm unit): rolling blinds detector, inertia detector, generic alarm contactTamper protection for opening and removal•Smart magnet holder: possibility to locate the magnet at 3 different positions •inside the housing to compensate for misalignment of fixturesTwo-way line of sight radio coverage: up to 500 m•Lithium battery powered (3V, included).•Dimensions(HxWxD):120x30x27mm•VersioninBROWN-MM30WL-BRcod.MM6800211•



IR30WL

IRA31WL / IRA31WL/P

MM30WL

2°level

1°level

2°level

IT-AI-3/2009-REV.0

59

Detectors

FO31WLcod.SD4000121Optical smoke detector, two-way radio communication, conforming to EN14604 (smoke alarm).

It is used both in household and industrial (shops, offices, etc.) environments, •thanks to its operation flexibility: self-contained by means of optic-acoustic signalling on the sensor; integrated into the WL31 system to take advantage of all the advantages of the Reply Technology® radio communication.Fully microprocessor-based control.•Radiorange:over250m•Coverage: 40 square m•Alarm, failure and “existence” signalling LEDs.•Device TEST and alarm reset button.•Integrated,high-ratingbuzzer(85dB(A)@3m).•Smoke threshold self-adjustment in order to avoid improper alarms.•Dust immunity and smoke sensitivity level adjustment.•Powered by 2 long-life lithium/manganese dioxide batteries (3 V), type:•CR123A(suppliedwiththeunit)–Formats:CR17345(IEC),5018LC(ANSI)Dimensions:Ø=136,h=68mm•

Sounder

HP30WLcod.HP8100111External sounder, two-way wireless communication, polycarbonate box with internal steel crushproof cage

Entirely microprocessor controlled•High acoustic power: 100 dB(A) at 3 m•Sounds modes controlled by alarm unit: break-in alarm, fire alarm, system •state tonesStrobe with high efficiency LED panel indicating: alarms, tests, system state•Tamper protection for opening and removal•Electronics protected in plastic casing with IP44 degree of protection•Radio coverage: up to 300 m line of sight•Powered by two 3.6V high capacity lithium batteries (included) with smart •energy management function Dimensions(HxWxD):265x210x65mm.•

Accessories

ITUSBcod.MP9H10111USB interface module for the WL31 control unit connection to a local PC•

MU30cod.MU2910111Memory card for data system backup•

KITFISSAGGIOcod.KT4800111Battery fixing kit for IMG30. •



FO31WL

HP30WL

IT-AI-3/2009-REV.0

60

WL20 WIRELESS EXTENSION


61

THE SYSTEM TO COMMUNICATE WITH AND WITHOUT WIREWL20systemwascreatedtomakeElkronbussystemshybrid(wireandwireless).Thismeansthat it is possible to make systems that can connect wire and wireless together. It is a significant advantage that permits to add sensors, contacts and sirens in an existing plant, without interve-ning on the wall to make new connections. The wireless extension is obtained by directly connec-tingtothecontrolunitbusMP110,MP120andMP200theinterfaceER20WLandapartfromeachprovidinginputandoutputwires,itcanmanagethroughradioupto48sensors(betweeninfrared and contacts) plus an outdoor siren.



1

4 WIRE INPUTS+ 2 OUTPUTS 24h

23

4

6 8

5

7

MP120

MP110

BUS

8 RADIOCHANNEL

FOR DETECTORS

RADIO CHANNELFOR SOUNDER

WIRE OUTPUTFOR SOUNDER

62

Wireless interface

ER20WLR/Tcod.WL1210113Wireless extension for hybrid systemsTheER20WLinterfaceworkswithbuscontrolunits(MP110,MP120and•MP200) acting as wire concentrators. The interface is powered by thebus, locally manages wire and radio peripherals and constantly exchanges respective status and alarm information with the control unit. Radio extension management is perfectly integrated with the rest of the system from all points of view: enabling signals, sector association, event log, remote management, etc. Receptionradiochannels:8•Linkable detectors: 6 for each channel•1transmissionradiochannelforcontrollingHP20WLwirelesssounder•Comunicazione in FSK a due canali nella banda dei 434 MHz.•Two-channel FSK communication in 434 MHz band•Maximum free field range: 500 m•Completesystemsupervision: every32minutes•Test mode •Diagnostic and status signals by means of LEDs and displays •Signals provided by each radio channel: alarm, tamper, low battery, radio •anomaly, supervisor not OKWire inputs: 4 entirely programmable•24hinputs:2•Electric outputs: 3 entirely programmable •Relay outputs: 1•Dimensions(HxWxD):138x74x53mm.•

ER20WLRcod.WL1310113SameasER20WLR/Tbutwithonlyreceptionchannels(withouttransmission•radio channel).



ER20WL R/T

IT-AI-3/2009-REV.0

63

Detectors

IR20WLcod.IR2B00113Passive infrared radio sensor with Extravision series patented three-function lens Range: 18m(volumetriclens)•

15 m (curtain lens) 25m(longrangelens)Copertura: 90°(volumetriclens)•

6°(curtainlens) 6°(longrangelens)Sensitivezones:20on3levels+2/creep-zone(wideanglelens)•

1on1levels+1/creep-zone(curtainlens) 7on5levels+1percreep-zone(longrangelens)

CREEP-ZONE detection •Free field radio range up to 500•Pulse counter •Walk test•Cut-offtime:2min•Opening and removal self protection •Optional self-protected joint•Battery charge check•Lithiumbattery:3V–1,3Ahincluded•Dimensions(HxLxP):138x74x53mm.•

MM20WLcod.MM4300113Radio transmitter with opening detector for protecting accesses (doors and windows)

Free field radio range up to 500 m•Internal reed contact •External contact input•Rope contact input for rolling shutters•Pulse counter •Opening and removal self protection •Battery charge check•Lithium battery 3V - 1,3 Ah provided•

Sounder

HP20WLcod.HP8000113Wireless outdoor siren in a high-resistance polycarbonate box, with •shatterproof protection cage and flasher. Free field radio range up to 500 m•Sound output: 104 dB at 3 m•Polycarbonate box•Shatter-proof, drill-proof steel cage•Battery charge check •Opening and removal self protection •Ring count programming•Two way radio communication•Lithiumthionylchloridebattery7,2V-13Ahprovided•Dimensions(HxWxD):265x210x65mm.•



IR20WL

MM20WL

HP20WL

IT-AI-3/2009-REV.0

64

65

VOLUMETRICDETECTORS

INFRARED .......................... pag. 67

DOUBLE TECHNOLOGY ....... pag. 73

MICROWAVE ....................... pag. 76

FOR OUTDOOR ................... pag. 77

66

INFRAREDDETECTORS

VOLUMETRIC PROTECTIONS

A NEW RANGE OF DETECTORSElkron presents its new range of detectors gathering, into one family only, the best anti-tamper technology, ready to meet any installation need. It is a smart and unmistakable series coming up complete and well structured in performances, joining different technologies into the same design and integrating them into a sole offer.This series is ranging from passive infrared models to double technology (infrared plus micro wave) models, then up to revolutionary Extravision® detectors with three-function lens that are also available in either infrared or double technology version. Therefore, it is a range offering the capability to integrate, within the same attractive appearance, the different best anti-tamper technologies at the highest performance level available today to design complete systems, ran-ging from a small flat to the most sophisticated and complex implementation.It is also to be reminded that all detectors are equipped with a distinguished innovative patented articulated joint, i.e. a new design for highest level performances.

NEW SERIES IRASeries IRA is born to offer a passive infrared detector family available in its different types of lenses. Models are provided using “classic” flat (cylindrical) lens detection system, as well as mo-dels using three-function Extravision® hemispherical Fresnel lens patented by Elkron, the latter being a very high density lens with 3 selectable covered ranges (volumetric, long range, curtain covering), where uniform sensitivity optics allow detection capacities independent of burglar di-stance or position within covered range

A COMPLETE RANGE OF DETECTORS

EXTRAVISION® THREE-FUNCTIONAL HEMISPHERICAL LENS

THE COVERAGE FIELD IS EASILY SELECTABLE BY TURNING THE LENSBY120°

120°

OPERATIVEAREA

VOLUMETRICLENS

CURTAINLENS

LONGRANGELENS

SPA10 BRACKET- wall or ceiling fastening- cables passing inside - removal protection (optional)

67

Analogic infrared detector with EXTRAVISION® trifunctional lens

IRA12cod.IR4B00211Passive infrared detector IRA12 is equipped with three-function Extravision® hemispherical Fresnel lens.

High-density lens with selectable coverage fields (volumetric, long-range, •curtain) where the uniform sensitivity optics allow detection capacities regardless of the intruder’s distance or position inside the coverage field. Range: 12mnominal(volumetriclens)•

12mnominal(curtainlens) 20mnominal(longrangelens)IRcoverage: 90°(volumetriclens)•

6°(curtainlens) 6°(lognrangelens)Sensitivezones: 23on5levels+2creep-zone(volumetriclens)•

1on1levels+1creep-zone(curtainlens) 7on5levels+1creep-zone(longrangelens)

PROTECTED P.I.R.: The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.ALARM MEMORY: In case of detection (when the system is on), the detector •led comes on with steady light to indicate the alarm memory.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation. ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.The detector is fitted with an automatic temperature adjustment system which •adapts the detection sensitivity to the different environmental conditions.WALK TEST: The detector operation is signalled by the LED coming on (it can •be cut off) Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:11mAnom.;17mAmax•Pulsecounter:X1/X2•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD)::85x70x50mm.•Weight:80g.•

IRA SERIES INFRARED DETECTORS


VOLUMETRIC LENS

LONG RANGE LENS

CURTAIN LENS

IRA 12

2°level

68

ANALOGIC infrared detector with cylindric Fresnel Lens

IRA13cod.IR6100211Passive infrared detector equipped with interchangeable cylindric Fresnel lens.

The Fresnel® volumetric lens manufactured in the factory can be replaced •with a curtain or long-range lens, optional.Forinstallationsatheightsdifferentfrom2.1metresitispossibletoadjust•the pyroelectric detector position by translating the printed circuit board up or down.Range: 12mnominal(volumetriclens)•

12mnominal(curtainlens) 20mnominal(longrangelens)IRcoverage: 108°(volumetriclens)•Sensitive zones: 31 on 4 levels (volumetric lens)•

1 on 1 levels (curtain lens) 7on4levels(longrangelens)

PROTECTED P.I.R.: The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.ALARM MEMORY: In case of detection (when the system is on), the detector •led comes on with steady light to indicate the alarm memory.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation. ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.The detector is fitted with an automatic temperature adjustment system which •adapts the detection sensitivity to the different environmental conditions.WALK TEST: The detector operation is signalled by the LED coming on (it can •be cut off) Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:11mAnom.;17mAmax•Pulsecounter:X1/X2•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD):70x85x54mm.•Weight:80g.•



IRA 13

VOLUMETRIC LENS

LONG RANGE LENS

CURTAIN LENS

2°livello

69

DIGITAL infrared detector with EXTRAVISION® trifunctional lens

IRA14cod.IR7B00211Detector with passive infrared signal digital processing equipped with three-function Extravision® hemispherical Fresnel lens.

High-density lens with selectable coverage fields (volumetric, long-range, •curtain) where the uniform sensitivity optics allow detection capacities regardless of the intruder’s distance or position inside the coverage field.Range: 12/15mnominal(volumetriclens)•

12/15mnominal(curtainlens) 18/25mnominal(longrangelens)IRCoverage: 90°(volumetriclens)•

6°(curtainlens) 6°(longrangelens)Sensitivezones: 23on5levels+2creep-zone(volumetriclens)•

1on1level+1creep-zone(curtainlens) 7on5levels+1creep-zone(longrangelens)

PROTECTED P.I.R.: The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.ALARM MEMORY: In case of detection (when the system is on), the detector •led comes on with steady light to indicate the alarm memory.FAULT DISPLAY: The detector can detect infrared section faults by displaying •them through the flashing LED.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation.ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.SENSITIVITY ADJUSTMENT: It is possible to adjust the detector sensitivity •according to two levels.AUTOMATIC TEMPERATURE COMPENSATION: The detector is provided with •two-direction automatic compensation, i.e., when environment temperature increases and approaches human body temperature, actuation threshold is decreased, while, when environment temperature becomes higher than human body temperature, the threshold rises back.WALK TEST: The detector operation is signalled by the LED coming on (it can •be cut off) PRE-ALARM FUNCTION: The approaching of the alarm threshold is indicated •by the flashing LED, while the threshold reaching is indicated by the LED steady light.Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:10,5mAnom.;13mAmax•Pulsecounter:X1/X2•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD):85x70x50mm.•Weight:80g.•



VOLUMETRIC LENS

LONG RANGE LENS

CURTAIN LENS

IRA 14

2°level

70

DIGITAL infrared detector with Fresnel lens

IRA15Pcod.IR6B00211Detector with passive infrared signal digital processing equipped with inter-changeable flat (cylindrical) Fresnel lens.

PET IMMUNITY: Through programming the detector can distinguish between •animalswithweightbelow18KG(range12m)orbelow35KG(range15m)Range: 12/15mnominal•IRcoverage: 88,5°•Sensitivezones: 52on11levels•PROTECTED P.I.R.: The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.ALARM MEMORY: In case of detection (when the system is on), the detector •led comes on with steady light to indicate the alarm memory.FAULT DISPLAY: The detector can detect infrared section faults by displaying •them through the flashing LED.VISUALIZZAZIONE STATO DI GUASTO: il rivelatore è in grado di rivelare •situazioni di guasto della sezione infrarosso, visualizzandole tramite il lampeggio del LED.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation.ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.AUTOMATIC TEMPERATURE COMPENSATION: The detector is provided with •two-direction automatic compensation, i.e., when environment temperature increases and approaches human body temperature, actuation threshold is decreased, while, when environment temperature becomes higher than human body temperature, the threshold rises back.WALK TEST: The detector operation is signalled by the LED coming on (it can •be cut off) PRE-ALARM FUNCTION: The approaching of the alarm threshold is indicated •by the flashing LED, while the threshold reaching is indicated by the LED steady light.Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:10,5mAnom.;13mAmax•Pulsecounter:X1/X2•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD):85x70x50mm.•Weight:80g.•



IRA 15P

2°level

71

Analogic detectors

IR21LDcod.IR0600211Mirror infrared detector

Range: 60 m•Coverage:4°horizontalplan•Coverage zones : 6 on 4 levels•Ratedvoltage:10,5÷14Vdc•Consumption:8mArated•Dimensionswithoutsupport:: 100x80x60mm•Intermittent LED for visualizing sensitive zones•Orientable, equipped with anti-tamper device•CertifiedNF-A2PType2•

IR015cod.IR4A00211Infrared detector with Fresnel Lens for ceilingRange:9m•Coverage:360°•Coverage zones: 34 on 5 levels•Installation: ceiling•Ratedvoltage:10,5÷14Vcc•Consumption:8mArated•Dimensions without support: 150 mm•

Accessories for IMA/IRA detectors

SPA10/10cod.SP7500111Adjustable joint for IRA - IMA detectors. Patented.

Wall or ceiling fastening•Cables passing inside•Removal protection (optional)•

KITTAMPERSPA10cod.KT7800111Tamper for SPA10 Joint to realize removal protections.

KIT2LENTIVB1,2G1V1cod.LT1310111Lens for curtain coverage for IRA series.

KIT2LENTILR1,2G112V1cod.LT1410111Lens for long range coverage for IRA series

Accessories for detectors 900 series

SP900/10cod.SP5900111Adjustable joint for 900 series detectors

KIT TAMPER cod. KT5000111Tamper for SPA900 Joint to realize removal protections..

INFRARED DETECTORS


IR 21LD

IR015

SPA10/10

2°level

1°level

72

DOUBLE TECHNOLOGYDETECTORS


A NEW RANGE OF DETECTORSElkron presents its new range of detectors gathering, into one family only, the best anti-tamper technology, ready to meet any installation need. It is a smart and unmistakable series coming up complete and well structured in performances, joining different technologies into the same design and integrating them into a sole offer.This series is ranging from passive infrared models to double technology (infrared plus micro wave) models, then up to revolutionary Extravision® detectors with three-function lens that are also available in either infrared or double technology version. Therefore, it is a range offering the capability to integrate, within the same attractive appearance, the different best anti-tamper technologies at the highest performance level available today to design complete systems, ran-ging from a small flat to the most sophisticated and complex implementation.It is also to be reminded that all detectors are equipped with a distinguished innovative patented articulated joint, i.e. a new design for highest level performances.

IMA SERIESThis new series with double technology is born to offer all the best features of combined infrared and micro wave technologies enhanced to the state of the art in both covered range and pro-tection; models can be chosen provided with either flat (cylindrical) Fresnel lens or three-function Extravision® hemispherical Fresnel lens.Passive infrared technology is sensitive to the heat of human body and signals its presence by invisible rays passing through projecting each lens element into protected area. Micro wave technology exploits Doppler effect and detects physical bodies moving. This technology is insen-sitive to environment temperature. These detectors are provided with function AUTOEQUALIZER®, enabling a dynamic adaptation of alarm threshold and optimises its detection conditions, that is necessary in presence of en-vironments which are troubled to a particular extent. Double technology detectors exploit the matching of passive infrared technology with micro wave technology, so exploiting respective peculiarities and reducing false alarms to zero, because alarm signalling is only present if both detectors confirm it. Model size is small; therefore, models are perfectly integrated into any environment.

A COMPLETE RANGE OF DETECTORS

120°

EXTRAVISION® THREE-FUNCTIONAL HEMISPHERICAL LENS

THE COVERAGE FIELD IS EASILY SELECTABLE BY TURNING THE LENSBY120°

OPERATIVEAREA

VOLUMETRICLENS

CURTAINLENS

LONGRANGELENS

SPA10 BRACKET- wall or ceiling fastening- cables passing inside - removal protection (optional)

73

Double Technology detector with trifunctional EXTRAVISION® Lens

IMA12cod.IM3000211Double technology detector equipped with three-function Extravision® hemi-spherical Fresnel lens.

High-density lens with selectable coverage fields (volumetric, long-range, •curtain) where the uniform sensitivity optics allow detection capacities regardless of the intruder’s distance or position inside the coverage field. Range: 12mnominal(volumetriclens)•

12mnominal(curtainlens) 12mnominal(longrangelens)IRcoverage: 90°(volumetriclens)•

6°(longrangeandcurtainlens)MWcoverage: 90°horizontal-36°vertical•Sensitivezones: 23on5levels+2creep-zone(volumetriclens)•

1on1level+1creep-zone(curtainlens) 7on5levels+1creep-zone(longrangelens)

PROTECTED P.I.R. : The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.The detector MW section is provided with AUTOEQUALIZER function for a •dynamic adaptation to the alarm thresholds.OPERATING LOGICS: Two operating modes are possible: AND1: the alarm is •triggeredonlyifbothIRandMWsectionsareenergized;AND2:thealarmis triggered only if both IR and MW sections are energized, or if the MW section is energized for some seconds.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation. ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.AUTOMATIC TEMPERATURE COMPENSATION: The detector is provided with •two-direction automatic compensation, i.e., when environment temperature increases and approaches human body temperature, actuation threshold is decreased, while, when environment temperature becomes higher than human body temperature, the threshold rises back.MICROWAVE EMISSION INHIBITION: The detector is in stand-by mode (system •off) inhibits the emission generated by the microwave section FAULT MEMORY: The detector can detect fault situations and display the •type of fault through the LED flashing. The detected fault conditions are the following: power supply voltage fault; microwave section fault; infrared section fault.Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:14mAnom.;35mAmax•Infraredsectionpulsecounter:X1/X2.•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD):124x70x50mm.•Weight:124g.•

IMA SERIES DOUBLE TECHNOLOGY DETECTORS


IMA 12

1°/2°level

74

Double Technology detector with interchangeable Fresnel® lens

IMA13cod.IM3100211Double technology detector equipped with interchangeable flat (cylindrical) Fresnel lens.

INCLINATION OF SENSITIVE RAYS: For installations at heights different from •2.1 metres it is possible to adjust the pyroelectric detector position bytranslating the printed circuit board up or down.INTERCHANGEABLE LENS: The Fresnel ® volumetric lens manufactured in •the factory can be replaced with a curtain or long-range lens, optional.Range: 15 m nominal (volumetric lens)•

15 m nominal (curtain lens) 15 m nominal (long range lens) IRcoverage: 108°(volumetriclens)•MWcoverage: 90°horizontal-36°vertical•Sensitive zones: 31 on 4 levels (volumetric lens)•

1 on 1 level (curtain lens) 7on4levels(longrangelens)

PROTECTED P.I.R. : The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light raysThe detector MW section is provided with AUTOEQUALIZER function for a •dynamic adaptation to the alarm thresholds.OPERATING LOGICS: Two operating modes are possible: AND1: the alarm is •triggeredonlyifbothIRandMWsectionsareenergized;AND2:thealarmis triggered only if both IR and MW sections are energized, or if the MW section is energized for some seconds.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation. ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.AUTOMATIC TEMPERATURE COMPENSATION: The detector is provided with •two-direction automatic compensation, i.e., when environment temperature increases and approaches human body temperature, actuation threshold is decreased, while, when environment temperature becomes higher than human body temperature, the threshold rises back.MICROWAVE EMISSION INHIBITION: The detector is in stand-by mode (system •off) inhibits the emission generated by the microwave section FAULT MEMORY: The detector can detect fault situations and display the •type of fault through the LED flashing. The detected fault conditions are the following: power supply voltage fault; microwave section fault; infrared section fault.Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:14mAnom.;35mAmax•Infraredsectionpulsecounter:X1/X2.•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD)124x70x54mm.•Weight:124g.•



IMA 13

1°/2°level

75

Double technology detector with antimasking

IMA15AMcod.IM3200211INCLINATION OF SENSITIVE RAYS: For installations at heights different from •2.1 metres it is possible to adjust the pyroelectric detector position bytranslating the printed circuit board up or down.INTERCHANGEABLE LENS: The Fresnel ® volumetric lens manufactured in •the factory can be replaced with a curtain or long-range lens, optional.Range: 15 m nominal (volumetric lens)•

15 m nominal (curtain lens) 30 m nominal (IR section, OR operation - long range lens) IRcoverage: 108°(volumetriclens)•MWcoverage: 90°horizontal-36°vertical•Sensitive zones: 31 on 4 levels (volumetric lens)•

1 on 1 level (curtain lens) 7on4levels(longrangelens)

PROTECTED P.I.R. : The PIR sensitive element is completely protected against •disturbances due to insects and/or air draughts which might generate false alarms. HALOGEN LIGHT PROTECTION: The lens colouring prevents false alarms •should the sensitive element be hit by white light rays.ANTI-MASKING FUNCTION: The detector identifies the masking function both •on the microwave section and, as a deduction, also on the infrared section.The detector MW section is provided with AUTOEQUALIZER function for a •dynamic adaptation to the alarm thresholds.OPERATING LOGICS: Two operating modes are possible: AND1: the alarm is •triggeredonlyifbothIRandMWsectionsareenergized;AND2:thealarmis triggered only if both IR and MW sections are energized, or if the MW section is energized for some seconds.STAND-BY “S” CONTROL: Through this input the detector is informed on the •system state (on or off). Therefore, it is possible to program the detector so that this information can control the alarm relay and LED activation/deactivation. SYNCHRONISM FUNCTION: this function makes it possible to install up to •max 4 detectors in one single environment preventing microwave section mutual interference.INIBIZIONE RELE’ DI ALLARME: possibilità di programmare l’uscita di allarme •affinché sia inibita quando il rivelatore è in stato di “stand-by”ALARM RELAY INHIBITION: Possibility of programming the alarm output so •that it is inhibited when the detector is in “stand-by” mode.AUTOMATIC TEMPERATURE COMPENSATION: The detector is provided with •two-direction automatic compensation, i.e., when environment temperature increases and approaches human body temperature, actuation threshold is decreased, while, when environment temperature becomes higher than human body temperature, the threshold rises back.FAULT MEMORY: The detector can detect fault situations and display the •type of fault through the LED flashing. The detected fault conditions are the following: power supply voltage fault; microwave section fault; infrared section fault.Min-maxoperationvoltage:9–15Vcc•Supplynominalvoltage:12Vcc•Absorption12V—:18mAnom.;38,5mAmax•Infraredsectionpulsecounter:X1/X2.•Alarmrelay:solidstaterelay-NC0.1A@24V—/Rmax=35ohm•Anti-tamperdevice:50mA@24Vcc•Operating temperature: -10 °C/ +55 °C (declared by themanufacturer)•+5°C÷+40°C(certifiedaccordingtoCEI79.2)Dimensions(HxLxD):124x70x54mm.•Weight:124g.•



IMA 15AM

1°/2°level

76

Double Technology detector with trifunctional EXTRAVISION® Lens

IM915AMcod.IM2600211Double technology detector equipped with three-function Extravision® hemi-spherical Fresnel lens.Range:15m(volumetriclens),15m(curtainlens),25m(longrangelens)•Coverage: 90°horizontalplan•Coveragezones:20on3levels+2creepzones(volumetriclens)•Creep zone detection•QUAD PIR sensor, double antimasking function (Patented)•PIR range adjustable•AND/OR operation•Autoequalizer function•Pulse count•Automatic temperature compensation•Double digital filter•Ratedvoltage:12Vdc•Consumption: 10mA at rest•Dimensionswithoutbracket: 138x74x53mm•Dimensions(HxLxD):138x74x53mm.•Weight:124g.•

Double Technology detector with Fresnel® lens

IM29CPUcod.IM1800111Double technology detector equipped with Fresnel lens.Globalrange:15/25mprogrammable•Microwavecoverage:70°horizontal,70°vertical•Sensitivezones:18zoneson3levels•Main frequency:in accordance with national frequencies•Autoequalizer® Function: variable thresholds in relation to the environmental •noise (for MW and IR)Microwave section sensitivity: adjustable•Infrared section sensitivity: adjustable•Alarm memory: adjustable•Operation: AND•Passive infrared: Fresnel lens•Warning leds: one for each section•Ratedvoltage:10,5÷14Vdc•Consumption: 30 mA under quiescent conditions•Dimensionswithoutsupport: 100X95X60mm•

Microwave Detector

MW21PDcod.MW1100211Microwave detector with antimasking.

Range: 30 m with anti-masking device•Coverage:70°horizontal,70°vertical•Main frequency: in accordance with national frequencies•Ratedvoltage:10,5÷14Vdc•Consumption:18mArated•Dimensionswithoutbracket:100x80x60mm•Orientable, equipped with anti-tamper device•CertifiedNF-A2PType3(IDVersion)•

DOUBLE TECHNOLOGY AND MICROWAVE DETECTORS


IM 915AM

IM29CPU

MW21PD

3°level

3°level

77

In front of the house, on the balcony, on the terrace, everywhere there is a small space to be kept under control, an external detector may be required, like the brandnewElkronmodelIMA20EX.Its range is 10 metres and it is based on a triple technology: dual passive infra-red and double microwave.This technology combination allows an accurate analysis of the alarm signal, thus ensuring a high reliability in distinguishing false alarms.

High capacity to distinguish false alarmsThe digital processing of the detected signals makes it possible to distinguish •the signals caused by movements from those generated by environmental disturbances.(MRDsystem–MotionRateDetect).The capacity to analyse a body interfering in the area covered by the micro-•wave section allows the distinction between the movement of a person and other movements (e.g. leaves carried by the wind).

Pet Immunity The detector digital processing can distinguish between the signals generated by a person and those generated by animals up to 35 kg.

Night functionThe detector can be programmed in order to generate alarm only when there is no sunlight, this way it can be used as “courtesy light”.

IMA20EXcod.IM3300113Outdoor detector with triple technology, dual passive infrared, double lobo microwave.Supplynominalvoltage:12V—•Min-maxoperationvoltage:9÷15V—•Absorption12V—:9mAnom.•Technology: double-channel microwave and mirror passive infrared•Detection range: 10m•Microwave sensitivity: adjustable with trimmer•Frequency:10.525GHz•Infrared sensitive areas: seven curtain beams•Temperature adjustment: present (digital adjustment)•Alarm duration: 3 seconds•Alarmoutput:NCinidleposit.max35V—/150mA•Anti-tamperdevice:NCmax.24V—/500mA•Pet immunity: up to 35 Kg•Operatingtemperature:25°C+55°C•Humidity:5~95%•Case protection level: IP43•Dimensions(lxhxp):152x75x55mm•Joint provided•

IMA20EX/AMcod.IM3400113Same as IMA20EX but with antimasking

OUTDOOR VOLUMETRIC DETECTOR


IM20EX - IMA20EX/AM

OUTDOORDETECTORS

78

79

INDOORPERIMETER

PROTECTIONSTRUCTURAL PROTECTION . pag. 80

INDOOR IR BARRIER ........... pag. 82

MAGNETIC CONTACTS ........ pag. 83

80

STRUCTUREPROTECTIONS

INDOOR PERIMETER PROTECTION

Sismic Detector

GD03 cod. GD0300113Glass break detector

4 wires powered •Rated voltage: 9÷16 Vcc•LED indication and Mosfet alarm relay •Dimensions (H x W x D) : 37 x 19 x 12 mm•

GD05PL cod. GD0400113Glass break detector

2 wires powerless •Rated voltage: 9÷16 Vcc•Electronic switch (no contact), also suitable for wireless alarm system •Dimensions (H x W x D) : 37 x 19 x 12 mm•

RT03 cod. RT0700173Test meter for GD05PL and GD03 detectors

ESD30 cod. VV0500113Electronic shock detector to be applied to doors and windows with automa-tic control of sensitivities and indication of vibration level

Smart pulse count: discriminations of false alarms•Dimensions (H x W x D) : 21 x 25 x 92 mm•

VSD3 cod. VV0600113Mechanical shock sensor for surface installation, to be used together with ESD30 electronic sensor

To widen the detection range of the ESD30 electronic sensor up to 3 •detectors can be connected

STRUCTURE PROTECTIONS

GD03

GD05PL

RT03

ESD30

VSD3

81


MS04 Vault Detector

MS04 cod. MS0800211Vault detector for signalling alarms for break-in attempts on reinforced concrete walls, safes, armoured cabinets, 24-hour deposits, armoured doors, etc.

Microprocessor technology with integral digital sensor management. •Total immunity from external electromagnetic interference thanks to double •galvanised isolation between connections area and signal detection and analysis.Cyclic self-test on two detection channels, with constant transducer and •amplification section integrity test. Threshold heat detector for detecting attempt to attack the microphone •with external temperature device which sharply influence the detector’s working temperature.Detection channels and methods:•

Perforation channel: 16 levels of sensitivity, 4 - integration values (delay) Explosion channel: 4 levels of sensitivity

View and storage of different types of alarm.•Test point for instrument testing.•“REMOTE” control for attenuating levels of sensitivity (ATM applications) •Double cable passage: to the control unit, with grommet - To optional •auxiliary sensor, external to microphoneSet-up for “internal perturbator” housing (optional) , for operative testing.•Possibility of “external perturbator” management (optional), for operative •testing on large surfaces.Nominal power voltage: 12V— ± 25%•Absorption: 25 mA typ at 12 Vdc 30 mA max.•Certified working temperature: from + 5°C to +40°C •Working temperature stated by manufacturer : from -10°C to +70°C.•Heat attack tampering tripping temperature : from - 5°C to +60°C•Automatic self test each 5 min•Degree of certified protection: IP30 (CEI 70-1). •Manufacturer’s declared degree of protection: IP54.•Effective floor surface protected: 48 sq.m.•Alarm terminals: solid state relay•Tamper terminals protected against: unauthorized opening; removal; heat •attacksDimensions (lxhxp): 136 x 48 x 89 mm.•Weight: 550 gr.•

MS04PK cod. MS1200211Same as MS04 but with cover patch device for protection of safes. Possibility to discriminate one between three positions: unavailable lock, available lock and intermediate position.

STRUCTURE PROTECTIONS

MS04

MS04PK

3° level

3° level

82

STRUCTURE PROTECTION

MS04 Vault Detector

MS04IT cod. MS1010211Internal test noise generator for MS04.It allows to test the detector in operational way (the noise generator transmits through the mean to be protected)

MS04ET cod. MS1110211External test noise generator for MS04 .It run the operational test in applications of large structures protection

ACCESSORIES

SPA04 cod. SP6900111Plate of adaptation and fixing for safes and reinforced structures.

KT TMP cod. KT4700111Fixing kit for composite structures.

MS04IT

MS04ET

2° level

2° level


INDOOR BARRIER

IL03RT infrared barrier

IL03R/T cod. IL0100111Indoor infrared barrier

Range: 30 m. •Power supply : 12 Vdc or 24 Vdc - 24 Vac •Direct optics •Emitter: Gallium Arsenide Diode•Rated voltage: 12 Vdc or 24 Vdc - 24 Vac•Transmitter consumption: 19 mA rated•Receiver consumption: 10 mA rated•Dimensions (H x W x D): 80 x 51 x 23,5 mm•Direct optics•Fully tampered •

INDOOR INFRARED BARRIER

IL03R/T

83


MAGNETIC CONTACTS

Magnetic contact for pivoting doors

MMB01 cod. MM4400213Heavy duty aluminium housing magnetic contact suitable for pivoting doors

Anti-tamper - NC contact•Max working distance : 35 mm•

Roller shutter contact

MF01 cod. MM4500113Roller shutter contact

With adjustable pulley•Dimensions (H x W x D) : 90 x 102 x 16 mm•

MF02 cod. MM4600113Inox roller shutter contact

With inox slide rolls•Dimensions (H x W x D) : 90 x 102 x 16 mm •

IV4Z cod. MP9610111Interface board equipped with 4 storable alarms inputs and 4 electric outputs, •one for each input. The board transforms the fast signals coming from equipment such as vibrators, shutter sensors, etc into signals manageable by alarm control units.

MMB01

MF01

MF02

1° level

MAGNETICCONTACTS

84


Surface magnetic contact

MMH01 cod. MM4700213High security surface triple magnetic balancing magnetic contact

IP65 Aluminium housing•Screw terminals•Suitable for gates and doors•Max working distance: 12 mm•

MMH02 cod. MM4800213Surface double magnetic balancing magnetic contact

IP65 Aluminium housing•Screw terminals•Suitable for gates and doors•Max working distance : 18 mm•

MMH03 cod. MM4900113Surface high power magnetic contact. IP65 Aluminium housing

Screw terminals•Suitable for gates and doors•Max working distance: 50 mm•

MMS01 cod. MM5300113Surface magnetic contact. WHITE ABS housing

Screw terminals•Max working distance: 15 mm•

MMS01BR cod. MM5400113Same as MMS01 but in BROWN ABS

MMS02 cod. MM5500213High power Surface aluminium magnetic contact

Suitable for iron doors•Cable terminals•Max working distance: 25 mm•

MMS50 cod. MM5700113White ABS Surface magnetic contact

Cable terminals•With antiamper•Minimum working distance: 10 mm•

MMS50BR cod. MM5800113Same as MMS50 but in BROWN ABS

MAGNETIC CONTACTS

MMH01

MMH02

MMH03

MMS01

MMS01BR

MMS02

MMS50

1° level

1° level

1° level

85


Surface magnetic contact

MMS03 cod. MM5600213High power Surface aluminium magnetic contact

Suitable for iron doors. Screw terminals•Max working distance: 25 mm•

MMS60 cod. MM6100113Surface aluminium magnetic contact

With antiamper•Minimum working distance: 10 mm•

MMS60MR cod. MM6200113Same as MM60 btu in BROWN aluminium.

Flush fitting magnetic contacts

MMI01 cod. MM5000213White ABS flush fitting magnetic contact

Diameter: 9 mm•With anti-tamper•Max working distance: 10 mm•

MMI02 cod. MM5100213Brass housing flush fitting magnetic contact

Diameter: 8 mm•With anti-tamper•Suitable for wooden and aluminium frames•Max working distance: 10 mm•

MMI03 cod. MM5200113Brass housing flush fitting magnetic contact

Diameter: 10 mm and 16 mm•With anti-tamper•Suitable for iron frames•Max working distance: 20 mm•

MMI17 cod. MM6000113White ABS flush fitting magnetic contact

Diameter: 9 mm•With anti-tamper•Max working distance: 20 mm•

Inertial detector

MMZ01 cod. MM5900113Inertial sensor with golden contacts.

Plastic housing. Suitable for all kind of glasses and frames•Dimensions (H x W x D): 34x34x21 mm•

MAGNETIC CONTACTS

MMS03

MMS60

MMS60MR

MMI01

MMI02

MMI03

MMZ01

1° level

1° level

1° level

86

87

OUTDOORPROTECTION

INFRARED BARRIERS .......... pag. 88

MICROWAVE BARRIERS ...... pag. 95

88

INFRARED BARRIEROUTDOOR PROTECTIONS

Elkron proposes high technological solutions for anti-intrusion protection in particular area, for instance isolated cottages, factory external, military zones, airports and other high risk zones. The technologies differ from active infrared and microwave.

Infrared indoor barriers and outdoor ones are constituted of infrared rays that create an ideal barrier that surrounds the protected zone. The alarm is enabled when the interruption of this invisible net occurs and range, differently according to the model it can reach 600 meters for the internal and up to 250 meters for the external. Some models are endowed with a system that eliminates false alarm caused by atmospheric agents, such as rain, snow or fog.

Microwave barrier fulfils an invisible protection phase with a 3-4meters diameter, generated between transmitter and receiver, that allows to obtain protection around the protected zone. It is an elevated technology that can reach 180 meters capacity each time and it is ideal for high risk situations.

OUTDOOR PROTECTION

EL20 infrared barrier

New active infrared barrier, strong, safe, reliable and easy to install. Thanks to its compact size (25x23 mm) it discreetly adapts to suit the most varied needs (for example it can be installed between window and blinds or roller shade)TSMD technology with microprocessor based managementThe barrier may be installed both indoors and outdoor thanks to its polycarbonate structure, with its high mechanical strenght and resistance to atmosheric agents (to a degree of IP65)Special details enable compensation for expansion due to temperature changesEASY TO INSTALL: as well as coming complete with a pre-wired cable, no special alignment procedures are required.The synchronisation of the rays is obtained automatically by way of an optic signal (without synchronism wire)POSSIBLE INSTALLATION OF SEVERAL consecutive or parallel barriers thanks to automatic encoding of coupling the first time the device is switched onEQUIPPED WITH ANTI-REMOVAL AND ANTI-OPENING DEVICE on both endsAlarm Memory3 different operating models: point-point beams, adjacent beams and crossed beams4 models for protection requirements of all dimensions. Range from 40 cm to 10 m for outdoor use and from 40 cm to 20 m for indoor useRange: from 40 cm to 10 m for outdoor and from 40 cm to 20 m for indoor

INFRARED BARRIERS

Examples of some applications

89

OUTDOOR PROTECTIONS

EL20 Infrared barrier

EL20RT/05 cod. EL1000211Indoor / outdoor barrier

Columns height: 0,5 m.•2 beams.•Outdoor range adjustable from 40 cm to 10 m.•Max indoor range 20 m.•Nominal power voltage TX-TX: 12 Vdc•Operating voltage min/max RX-TX: 5 - 15 Vdc.•Intervention time management: 0.1 s (for 2 contiguous beams •interruption).Signal characteristics: PM transmission (Pulse mode).•Alarm relay contact: 0,1 A@24 Vdc.•Antiremoval / antitamper: 50 mA@12 Vdc.•Manufacturer’s declared degree of protection: IP65 IK04.•Certified degree of protection (CEI 70.1): IP34.•Fault indication: Optic, through red led•Certified operating temperature (CEI 79.2): -25°C - +55°C.•Dimensions: 540 x 25 x 23 mm.•Weight: 250 g.•Ampi certification.•

EL20RT/10 cod. EL1100211Same as EL20RT/05 but with:

Column height: 1 m.•4 beams•Dimensions: 1030 x 25 x 23 mm.•Weight: 500 g.•


Column height: 1,5 m.•6 beams•Dimensions: 1520 x 25 x 23 mm.•Weight: 750 g.•


Column height: 2 m.•6 beams.•Dimensions: 2020 x 25 x 23 mm.•Weight: 1000 g.•

INFRARED BARRIER

EL20RT/05

EL20RT/10

EL20RT/15

EL20RT/20

2° level

2° level

2° level

2° level

90

OUTDOOR PROTECTIONS

EL15 Infrared barriers

New generation outdoor security systems; a special technology eliminates all disturbances and false couplings causedby interferences between adjacent barriers. This is done by an additional circuit known as “synchronizer” designed to synchronize and couple the barriers.Therefore each transmitter is coded and paired with its receiver and cannot interfere with other receiver. 15 different codes are possible for each barrier cell (set by rotary switch), therefore it is possible to install up to a maximum of 15 barriers without interference even if they are very near to one another.When installing in cold areas, it is advisable to use heating circuit RS10 (optional); provisions have been made for the insertion of this circuit into the transmitter and the receiver through the appropriate connection.The El10 barrier is immune to the environmental disturbances caused by the sun or by other infra-red reflections. Furthermore, the device features a circuit for the disqualification (exclusion) of the alarm which, in the case of heavy fog, snow or downpours, blocks the alarms relay into a “rest” position and provides an electrical signal at the terminal board. The disqualification circuit resets the systems automatically when the above-mentioned condition has ceased.

EL15R/T cod. EL0400111Outdoor barrier

Range 100 m.•Max width: 2,5 m.•Receiver sensitivity adjustment for range up to 30 m.•Photo transmitter element made by Galliu Arsenide Diode•Fresnel lens optics technology.•SMD circuit technology.•Impulse coding device. With this module it is possible to install up to 15 •transmitters/receivers in the same barrier.High degree of sensitivity.•Receiver lock control (TC).•Test led.•Adjustment of “beam” interruption time.•Equipped with anti-tamper device and built-in disqualification circuit. •Rated voltage: 10,5 ÷ 14 Vdc.•Transmitter consumption: 10 mA nominal.•Receiver consumption: 15 mA at rest - 27 mA in alarm.•Dimensions (H x W x D): 62 x 60 x 150 mm.•

EL15/S cod. EL0360115Synchronism module for EL15RT.

INFRARED BARRIERS

EL10R/T

91

OUTDOOR PROTECTIONS


The infrared modulated light barrier EL10 is ideal for external perimeter protection of industrial plants, villas or gardens, thanks to the characteristics of the electronic circuit, the relative paintwork and the shape of the aluminium columns which provide support as well as hiding the position of the sensor.The sensors are provided with a MAKROLON container (made waterproof by a rubber washer) wich also allows the external installation of an individual device so as to provide detector systems even at access points (security commands, opening/closing of doors, gates, etc.. When installing in cold areas, it is advisable to use heating circuit RS10 (optional); provisions have been made for the insertion of this circuit into the transmitter and the receiver through the appropriate connection.The El10 barrier is immune to the environmental disturbances caused by the sun or by other infra-red reflections. Furthermore, the device features a circuit for the disqualification (exclusion) of the alarm which, in the case of heavy fog, snow or downpours, blocks the alarms relay into a “rest” position and provides an electrical signal at the terminal board. The disqualification circuit resets the systems automatically when the above-mentioned condition has ceased.

EL10R/T cod. EL0800111Outdoor barrier

Range 100m.•Receiver sensitivity adjustment for range up to 30 m.•Fresnel lens optics technology.•SMD circuit technology.•High degree of sensitivity.•Receiver lock control (TC).•Test led.•Adjustment of “beam” interruption time.•Equipped with anti-tamper device and built-in disqualification circuit. •Rated voltage: 10,5 ÷ 14 Vdc.•Transmitter consumption: 30 mA nominal.•Receiver consumption: 15 mA at rest - 27 mA in alarm.•Dimensions (H x W x D): 62 x 60 x 150 mm.•

Accessories for barrier EL10 and EL15RT

GA01 cod. KT1500111Alignment kit.

RS10 cod. EL0200115 Heating resistance for EL10/EL20.

RS10/T cod. EL0600115Thermostat for RS10.

KIT COPERCHIO cod. EL0910111Cover kit for EL barriers .

INFRARED BARRIER

EL15R/T

92

OUTDOOR PROTECTIONS

Accessories for barriers EL10 and EL15RT

SP13/15 cod. SP1200111 Supporting pole for columns SP11/15 and 20. Height 1,5 m..

SP13/20 cod. SP1300111Supporting pole for columns SP11/25 and 30. Height 3 m.

SP11/15 cod. SP1100113Anodized aluminium column for EL10 and EL15 barriers height 1,5 m

SP11/20 cod. SP1200113Same as SP11/15 height 2 m

SP11/25 cod. SP1300113 Same as SP11/15 height 2,5 m

SP11/30 cod. SP1400113Same as SP11/15 height 3 m

SP11M cod. SP1600161 Kit with microcontact on bracket for SP11

KIT x SP11/15 cod. KT1320161 Additional kit including: 1 upper cover for SP11 column, 1 lower cover for SP11, 1 cable guiding connector, 2 packs of gaskets, bolts and screws




INFRARED BARRIERS

93

OUTDOOR PROTECTIONS


EL50 R/T range is a set of active infrared ray barriers which is ideal to be used for perimetral protections of external and internal areas, for large are-as too. EL50 R/T range is made up of a barrier having 60 m max external range and 1 IR double ray, of a barrier having 150 m max external range and 1 IR double ray, and of a barrier having 250 m max external range and 2 double rays. Barriers are operating on 4 different frequencies selectable with dip switches, provided with high quality aspheric lenses and box having seals which make them suitable to outdoor post installations too (provided brackets).

EL50RT2PH-60 cod. EL1400113Indoor / outdoor barrier

120 m internal area nominal range, 60 m external area nominal range•1 IR double ray •Transmission selectable on 4 different frequencies •Optical synchronisation•Gain automatic control (AGC) •High precision aspheric lenses •View finder for optical alignment with micrometric regulation•0° to 180° ray regulation•Ray interruption time regulation •Independent use or use in SP50 column •Power supply: 10,5 - 30 Vdc.•Absorption: 85 mA max.•Relais intervention time: from 50 to 700 ms.•Output relais: 1 alarm NO/NC - 0.2A - 28 Vdc •

1 tamper NO/NC - 0.2A - 28 VdcAdjustment angle: Horizontal 0°-180° - vertical +/- 10°.•Protection degree: IP55.•Operating temperature: -25°C/+55°C.•Dimensions and weight: 76 x 181,5 x 77,8 mm - 924 gr. (TX e RX)•

EL50RT2PH-150 cod. EL1500113Same as EL50RTPH-60 but with:

300 m internal area nominal range,150 m external area nominal rang. •Dimensions and weight: 100 x 247 x 100 mm - 1826 gr. (TX e RX)•

EL50RT2PH-250 cod. EL1600113Same as EL50RTPH-60 but with:

500 m internal area nominal range, 250 m external area nominal range •2 IR double rays.•Detection mode: 4 rays interruption.•Disqualification output•Absorption: 97 mA max.•Output Relais: 1 alarm NO/NC - 0.2A - 28 Vdc •

1 disqualification NO/NC - 0.2A - 28 Vdc 1 tamper NO/NC - 0.2A - 28 Vdc

Dimensions and weight: 100 x 390 x 100 mm - 1440 gr (TX e RX)•

EL50 INFRARED BARRIER

EL50RT2PH-60

EL50RT2PH-150

EL50RT2PH-250

94

OUTDOOR PROTECTIONS

Accessories for EL50 infrared barriers

SP50/15 cod. KT2B00163Column for barrier EL50 height 1,5 m

Modular SP50 column, for infrared perimetral barriers, is made up •of sections made of black anodised aluminium and covering made of polycarbonate, and is available with 1 to 4 m lengths. By using special accessories, the column can be installed with wall fastening, with floor fastening and with underground fastening base.

SP50/20 cod. KT3B00163Same as SP50/15 height 2 m.

SP50/25 cod. KT4B00163Same as SP50/15 height 2,5 m.

SP50/30 cod. KT5B00163Same as SP50/15 height 3 m.

KIT SP50 cod. KT8B10163Brackets for fastening the column to wall

KIT 2xPH-60 cod. KT9B10163Fastening bracket for 2PH60m barrier

RS50T cod. EL1710163Thermostat-providing apparatus for SP50

ZA X SP50 cod. SP8910163Cramp to be cemented on the ground

BASE SP50/30 cod. SP8810163Base for fastening the column to floor (SP50 over 2m)

BASE SP50/20 cod. SP8710163Base for fastening the column to floor (SP50 up to 2m)

PS/SP50 cod. PS6810163Battery charger power supply for the column

EL50 INFRARED BARRIER

SP50 + BASE

SP50

95

MICROWAVEBARRIERS

OUTDOOR PROTECTIONS

MWA60R/T Microwave Barrier

MWA60 is an active micro wave barrier with 60m maximum range, designed for external and internal surface protection. The system is made up of two units. Equipment is only built with solid state devices and finished with tropica-lising resin in order that excellent weather-tightness is enabled.

Protection lobe Radiation field shape is quite well defined. Therefore, this shape enables hi-gher detection probability with minimum number of undesired alarms. Tran-smitter includes planar micro wave emitting a highly steady low power narrow and directive beam.

Selectable channelsTransmitter and receiver can be tuned in frequency through dip switches ena-bling to code 5 different channels. In this way, interference is prevented in the case of simultaneous installations of more pairs of barriers

Selective filter Each receiver is provided with a particular selective filter which only chooses the frequency of its own channel and rejects the other frequencies, so preventing the barrier from being bypassed should a false Transmitter be used.

Automatic compensationReceiver is provided with an output which is started in case of insufficient signal. This is made to prevent and signal misalignment produced either when the system is off or owing to obstacles put within barriers operating beam.

Disqualification signalling Receiver is provided with an output which is started in case of insufficient signal. This is made to prevent and signal misalignment produced either when the system is off or owing to obstacles put within barriers operating beam.

MICROWAVE BARRIERS

96

OUTDOOR PROTECTIONS

MWA Microwave barrier

MWA60R/T cod. MW5500111Outdoor microwave barrier

Range: 60m•Nominal voltage: 12Vdc•Min/max voltage: 11.5 - 15Vdc•Absorption at rest: TX 31mA, RX 70mA•Absorption in alarm condition: TX 31mA, RX70mA•Transmission frequency: 10.525 GHz (+/_ 20MHz)•Alarm relay block : signal on dedicated input•Alarm relay: N.C. 500mA 12V•Tampering protection : anti-opening switch (anti-disorientation kit available) •Disqualification signalling: electrical output •Modulation: 5 selectable channels•Radiated power : 25 peak mW •Operating temperature: -20 + 55 C° (heating kit available) •Protection grade: IP 34•Dimensioni (l x h x p): 176 x 230 x 133 mm.•

MWA120R/T cod. MW5600111Same as MW60RT but with range 120 m

MW30R/T microwave barrier

MW30RT cod. MW1900111 Outdoor microwave barrier

Range: 180 m (program. 15 ÷ 100 m, 100 ÷ 180 m)•Beam width: 6 m adjustable•Four modulating channels•Supply: 12 Vdc or 18 Vca•Battery space: 12 Vdc - 1,9 Ah•Frequency: in accordance with national frequences•Supply: 10,5 ÷ 14 Vdc, 16 ÷ 18 Vca•Consumption: 85 mA (TX), 35 mA (RX)•Beam width adjustments•Automatic Gain Control (AGC)•Intervention time adjustment•Possibility of alternating current supply•Anti-intruder tamper•Setting and control test points•Internal warning led for visualization during installation•Dimensions (H x W x D) : 250 x 250 x 130 mm•

MICROWAVE BARRIER

MW60RT

IT-AI-3/2009 - REV.0

MW30R/T

97

OUTDOOR PROTECTIONS

Fixing systems for MWA microwave barriers

SP20/MWA cod. SP9410113Brackets for fastening the barrier to wall.

Lenght 150 mm.•

SP50/MWA cod. SP9510113Brackets for fastening the barrier to wall.

Lenght 580 mm.•

SP120/MWA cod. SP9610113Floor pole for MWA barrier

Lenght 1200 cm.•

SP130/MWA cod. SP9710113Underground post for barrier MWA60

Lenght 1200 cm.•

Accessories for MWA microwave barrier

RS/MWA cod. MW5810113Kit thermostat and heating.

KIT AMP/MWA cod. KT1C10113Kit anti-removal/anti-disorientation kit

Accessories for MW30 microwave barrier

SP10/15 cod. SP1000111Galvanized pole for MW30RT. Height 1,5 m.

SP10/20 cod. SP1100111Galvanized pole for MW30RT. Height 2 m.

RT35 cod. RT0200171Test meter for MW30RT alignment.

MICROWAVE BARRIER

SP120/MWA

SP20/MWA

IT-AI-3/2009 - REV.0

98

99

SOUNDERS

OUTDOOR SOUNDERS ........ pag. 100

INDOOR SOUNDERS ........... pag. 104

100

OUTDOORSOUNDERS

SOUNDERS

Aluminium outdoor sounder

HPA701 cod. HP8400211Outdoor sounder

Sounder made of metallic silver painted die-cast aluminium with blinker area •covering made of polycarbonate.Controls managed through microprocessor.•Acoustic pressure: 103 dB (A) @ 3 m.•Anti-breaking protection inner cage made of zinc-plated metal sheet: optional.•Anti-opening / anti-tampering system. •Counter plate made of steel: optional.•Start block function. •Sound mode programmable on 16 different modulations with 2 IMQ-•complying honking modes.DEMO function for listening to different honking modulations (with reduced •loudness).Battery and horn failure self-diagnosis.•Mini water level prearrangement.•Chance of programming block (BL) and TC inputs as balanced or normally •closed, referred to positive or negative.Sound time-out in case of permanent lack of block signal (4 different •programmable timings).Sound count (can be excluded)•Battery test (under load), flashlight integrity and horn;•Electric failure output for low battery, interruption or short circuit of the •flash module, horn interruption or short circuit, protection module functional anomaly (if present);Protection from battery polarity inversion and supply from central unit.•Protection against opening and removal.•Rated supply voltage: 13,8 V— , 14,4V—•Operating voltage (min – max): 9 ÷15 V—•Absorption at rest: 4 mA.•Max alarm absorption: 650 mA.•Max central unit absorption: 150 mA.•Operating frequency: 1400 ÷ 1600 Hz.•Input lock voltage (NC to positive): 4,3 Vdc min. ÷ Vcc max.•Input lock voltage (balanced to positive): 3,5 min ÷ 7,5 V max.•Battery low threshold: 11,2 Vdc ÷ 11,4 Vdc.•Opening/removal preventing micro-switch: 1 A @ 24 Vdc•Operating temperature declared by the manufacturer: -25°C ÷ +70°C.•Operating temperature certified (Norme CEI): -25°C ÷ +55°C.•Envelope protection degree declared by the manufacturer: IP43 / IK06.•Envelope protection degree certified: IP34.•Allocable battery: 12 V / 2,2 Ah.•Dimensions (H x W x D): 237 x 287 x 90 mm.•

OUTDOOR SOUNDERS

HPA701

2° level

101

SOUNDERS


HPA702LG cod. HP8600211Outdoor sounder

Sounder made of metallic silver painted die-cast aluminium•LED Technology signalling flash (polycarbonate)•Controls managed through microprocessor.•Acoustic pressure: 103 dB (A) @ 3 m.•Anti-breaking protection inner cage made of zinc-plated metal sheet:•Anti-opening / anti-tampering system. •Electronic anti-perforation protection: option•Electronic anti-foam protection: option•Overtemperature warning (oxyhydrogen flame, oxygen lance): option•Counter plate made of steel: optional•Start block function.•Alarm storage (by blinking the flash).•Sound mode programmable on 16 different modulations with 2 IMQ-•complying honking modes.DEMO function for listening to different honking modulations (with reduced •loudness).Autodiagnosi di guasto batteria e tromba.Mini water level prearrangement.•Chance of programming block (BL) and TC inputs as balanced or normally •closed, referred to positive or negative.Sound time-out in case of permanent lack of block signal (4 different •programmable timings).Sound count (can be excluded)•Battery test (under load), flashlight integrity and horn;•Electric failure output for low battery, interruption or short circuit of the •flash module, horn interruption or short circuit, protection module functional anomaly (if present);Protection from battery polarity inversion and supply from central unit.•Protection against opening and removal.•System status function for “scaffolds•Visual signalisation for “failure status” and “system status”•Rated supply voltage: 13,8 V— , 14,4V—. •Operating voltage (min – max): 9 ÷15 V—•Absorption at rest: 4 mA.•Max alarm absorption: 750 mA.•Max central unit absorption: 150 mA.•Flash absorption: 100 mA peak; 7 mA medium.•Operating frequency: 1400 ÷ 1600 Hz.•Input lock voltage (NC to positive): 4,3 Vdc min. ÷ Vcc max.•Input lock voltage (balanced to positive): 3,5 min ÷ 7,5 V max.•Battery low threshold: 11,2 Vdc ÷ 11,4 Vdc.•Opening/removal preventing micro-switch: 1 A @ 24 Vdc•Protection module tamper contact (solid state relay): 50 mA @ 50 Vdc; R type •= 20 ohmOperating temperature declared by the manufacturer: -25°C ÷ +70°C.•Operating temperature certified (Norme CEI): -25°C ÷ +55°C.•Envelope protection degree declared by the manufacturer: IP43 / IK06.•Envelope protection degree certified: IP34.•Allocable battery: 12 V / 2,2 Ah.•Dimensions (H x W x D): 237 x 287 x 90 mm.•

OUTDOOR SOUNDERS

HPA702LG

2° level

102

SOUNDERS


HPA702L cod. HP8500211Outdoor sounder

Same as HPA702LG but with Optional anti-breaking inner cage•

HPA703XP cod. HP8700211Outdoor sounder

Same as HPA702LG but with:•Electronic anti-perforation protection: standard.•Electronic anti-foam protection: standard•Overtemperature warning (oxyhydrogen flame, oxygen lance): standard•Absorption at rest: 8 mA.•Absorption max in alarm: 1550 mA.•Flash Absorption: 900 mA di picco; 65 mA medi.•

HPA703XP/H cod. HP9000211Outdoor sounder

Same as HPA703XP/A but with:•Acoustic pressure 106 db(A) @ 3m; 110 db(A) @ 1m.•

Accessories for 700 series sounders

CONTRO PIASTRA cod. SP8510111Reinforcement stainless steel plate

Reinforcement stainless steel plate.•

GABBIA cod. HP8910111Internal protecting cage

Internal protecting cage for 700 series sounders•

MODULO PROTEZIONI cod. HP8810111Relais module

Protection module against foam, perforation, thermal attacks•

Polycarbonate sounders

HP202L cod. HP5000111Polycarbonate sounder with Sound Output: 104 dB at 3 m

Anti-breaking case: option•Signalling flash: incandescence lamp•Anti-opening/removal tamper•Initial block function•Polarity inversion protection with self-reset•Ring count programming with self-bypass•Immunity from noises (RF - EMI)•Consumption: 9 mA quiescent / 1,1 A alarm •Operating temperature: -25° / +55° C•Allocable batter 12 Vdc 2,2 Ah•Dimensions (H x W x D): 230x210x65 mm•

OUTDOOR SOUNDERS

HPA702L

HPA703XP - HPA703XP/H

HP202L / HP202LG

2° level

3° level

103

SOUNDERS

Polycarbonate sounders

HP202LG cod. HP5100111Same as HP501 but with standard anti-breaking case

Polycarbonate sounder with anti-approaching device

HP202LX cod. HP5200111Polycarbonate sounder with anti-approaching device

Sound Output: 104 dB at 3 m•Anti-breaking case•Initial block function•Polarity inversion protection with self-reset•Ring count programming with self-bypass•Immunity from noises (RF - EMI)•Operating temperature: -25° / +55° C•Anti-opening/removal tamper•Allocable battery: 12 Vdc 2 Ah•Dimensions (H x W x D): 265 x 210 x 65 mm•

External sounder in stainless steel

HP602LG cod. HP5700111External sounder in stainless steel built with the micro-processor techno-logy

External sounder in stainless steel built with the micro-processor •technologyStainless steel internal protection cage•Electronic antifoam and overheating protection•Protection degree: IP34•Mechanical resistance level: IK06•Initial block function•Protected from battery and central unit supply polarity inversion•Alarm count: maximum 5 over 24 hours•Consumption: 27 mA quiescent / 1,3 A alarm•Anti-opening/removal protection•Operating temperature:-25° / +70° C•Allocable battery:12 Vdc 2,2 Ah•Dimensions (H x W x D): 243 x 285 x 92 mm•Weight (without battery): 2550 g•

OUTDOOR SOUNDERS

HP202LX

HP602LG

IT-AI-3/2009 - REV.0

104

Indoor sounders

HP12 cod. HP2800113Indoor sounder in protected plastic case

Sound Output: 110 dB at 1 m•Frequency: 2770 Hz•Dimensions (H x W x D): 160x110x38 mm•

HP25 cod. HP0200111Indoor sounder in protected plastic case

Sound Output: 126 dB at 1 m•Frequency: 1800 ÷ 2800 Hz•Dimensions (H x W x D): 112x112x170 mm•

HP305 cod. HP5300211Self-powered internal sounder

Sound output: 112 dB (A) at 1m•Max consumption in alarm 650 mA•2 different sound type: continuous high power and intermittent high or low •powerEpoxy-polyester painted zinc plated steel case•4 different time-out sound management (for example cable cutting)•Sound block function•Anti-opening anti-removal protection•The sounder can operate without battery through power supply from the •control unitDimensions (H x W x D): 200 x 184 x 65 mm•Weight (without battery) 1560 gr•

HP305P cod. HP5300311Same as HP305 but with :

Sound output 117 dB (A) at 1 m•Max consumption 2,2 A•

HP301A cod. HP0800311Self-powered internal sounder

Sound Output: 111 dB (A) ad 1 m•Metallic case •Dimensions (H x W x D): 211 x 165 x 44 mm•Weight:1,6 kg (without battery)•Space for battery 12 Vdc 2,1 Ah•Case degree of protection: IP31 and IK07•

INDOOR SOUNDERS

HP12

HP25

HP305 / HP305P

HP301A

2° level

INDOORSOUNDERS

SOUNDERS

105

COMMUNICATORS

GSM COMMUNICATORS ..........pag. 106

PSTN COMMUNICATORS .........pag. 108

106

GSMCOMMUNICATORS

COMMUNICATORS

The complete tranquillity is the timeliness that the possible alarm reaches the person who is capable to intervene. In this issue Elkron telephone communicators offer very innovative perfor-mances, thanks to the innovation of built-in GSM modules that allow not to use another mobile phone to the communicator.

Anywhere and with any telephone, you can receive the alarms, make controls and receive imme-diate vocal communication, or else using a GSM mobile phone, you can also reach with plain lan-guage SMS. The flexibility of Elkron’s new communicators permit to programme the association between events and receivers telephone numbers, and for each choose which telephone system to use (GSM and/or PSTN).

To guarantee the maximum security the new Elkron’s communicators, control the availability of the network and in case of obstruction or faults, they automatically pass to the alternative net-work. Besides they send precious information, such as the expiration of the SIM card, technical failure and telephone fault

COMMUNICATORS

GSM Communicator

CT10-M cod. CT4600111Vocal Synthesis GSM communicator with GSM module included

Alarms through vocal messages on GSM network and through SMS •messages (programmable via keypad).Telephone numbers: 12 (max 28 digits).•Vocal messages: 1 - 10 sec + 5 -10 sec or 10 - 5 sec.•SMS Messages: 20 messages - 140 characters max.•Remote control feedback (by voice messages).•Non-volatile memory (operation ensured also during a blackout).•SIM expiration warning.•Answering service function.•Remote call barring (DTMF control).•Telephone connection check.•On-board alphanumeric keypad with 2-line 16-character LCD.•6 system status and warning LEDs.•Telephone line test: coverage field test always enabled.•Alarm inputs: 2.•TC input: 1.•Prog. outputs, 4 electric (+12 V), 1 relais (NO e NC), all telecontrollable.•Memory: alarms and call results.•Program codes: User/Installer code.•Vocal synthesis non volatile, recording through earphone (supplied)•Remote inquiries commands.•Status inquiry: DTMF.•Telecontrollable outputs: DTMF.•Anti-tampering protection.•Operating voltage: 10,5 ÷ 14 Vdc•Allocable battery: 12 Vdc 2 Ah•Dimensions (H x W x D): 245 x 185 x 70 mm.•

GSM COMMUNICATOR

CT10-M

107

COMMUNICATORS

GSM and PSTN communicators

CT11-M cod. CT4700111Bi/standard GSM/PSTN Vocal Synthesis cellular communicator with GSM module included

Programmable alarm channel: through messages on GSM network (vocal •or SMS) or messages on PSTN line.Telephone numbers: 12 (max 28 digits).•Vocal messages: 1 - 10 sec + 5 - 10 sec or 10 - 5 sec.•SMS Messages: 20 messages - 140 characters max.•Remote control feedback (by voice messages)•Non-volatile memory (operation ensured also during a blackout)•SIM expiration warning•Answering service function•Remote call barring (DTMF control)•Telephone connection check•On-board alphanumeric keypad with 2-line 16-character LCD•6 system status and warning LEDs.•Telephone line test: coverage field test always enabled.•Alarm inputs: 2.•TC input: 1.•Prog. outputs, 4 electric (+12 V), 1 relais (NO e NC), all telecontrollable.•Memory: alarms and call results.•Program codes: User/Installer code.•Vocal synthesis non volatile, recording through earphone (supplied)•Skip outgoing message on PSTN line.•PSTN telephone line test PSTN.•Automatic backup on available telephone network.•Remote inquiries commands.•Status inquiry: DTMF, SMS codes with pre-recorded vocal answer•Telecontrollable outputs: DTMF, SMS codes•Anti-tampering protection•Operating voltage: 10,5 ÷ 14 Vdc.•Allocable battery: 12 Vdc 2 Ah•Dimensions (H x W x D): 245 x 185 x 70 mm.•

GSM COMMUNICATOR

CT11-M

108

COMMUNICATORS

PSTN Communicator

CT06 cod. CT4900211PSTN Communicator

Numbers of alarm inputs: 2•TC control inputs: 1•Inputs reference voltage: selectable (+) or (-)•Programmable phone numbers: 12 numbers with 28 digits each•Vocal messages: 1 10s base + 9 5s base•Failure electric outputs: 2 –10mA Imax each•Remotely controllable electric outputs: 2 –10mA Imax each•Remotely controllable relay output: 1 –1A Imax (on relay exchange)•Selectable languages: I ta l ian/French/Engl ish/German/Spanish/•PortugueseSelectable telephone networks: Italy/France/England/Germany/Spain/•PortugalSelection type: DEC/DTMF•Low battery threshold: <10.8V •Anti-opening anti-tampering system•Operation minimum voltage: 12Vdc •Operation MAX voltage: 14.5Vdc•Typical absorption at rest: 70mA•Maximum absorption: 250mA•Current on aux. supply output: 150mA Imax•Allocable accumulator: 12Vdc – 2.2Ah•Display: LCD type with 2 16-character lines •Operation temperature: + 5°C to +40°C•Size (H x W x D): 245 x 185 x 70 mm•

PSTN COMMUNICATORS

CT06

2° level

109

HOME AUTOMATIONACCESSORIES

AID KIT ............................... pag.110

ACTIVATION SYSTEMS ........ pag.111

ELECTRICAL SERIES ADAPTORS .pag.112

RADIOTRANSMITTERS ........ pag.113

BATTERIES ......................... pag.113

POWER SUPPLY UNITS ........ pag.114

110

HOME AUTOMATION / ACCESSORIESHOME AUTOMATION / ACCESSORIES

Aid Kit

The Aid Kit is the new device which can be interfaced with the control panel MP508 and telephone communicators in order to transmit an alarm and call the most useful numbers in case of emergency.This device consists of two units: a receiver and a transmitter remote control with collar and coverage of 80 meters (in free air). In case of need it is suffi-cient to press the suitable pushbutton to dial aid telephone calls at any time

KIT SOCCORSO cod. KT5700113Receiver characteristics

Receiver characteristics•Power supply 12Vdc•1 aid alarm relay output •1 flat battery relay output (remote control)•1 self-protection relay output •1 reset input•Alarm memory LED •Alarm buzzer (can be excluded)•Dimensions (H x W x D) : 83 x 83 x 30 mm•

Remote control characteristics Pushbutton operation or collar operation •3V lithium battery CR2032 (included)•Operating life 1 year•Coverage 80m (in free air)•Dimensions (HxLxP): 56 x 40 x 15 mm•

The separate remote control is also available: TRASM. DI SOCCORSO cod. TX1000113

AID KIT

AID KIT

111

HOME AUTOMATION / ACCESSORIES

DK41S System

DK41S cod. DK0300211Microprocessor analysis circuit

Patented opto-digital system with operatin on a single serial line of up to 8 •key readers and 4 zone-splitters (RS485) Part set into 4 sectorsKey self-programming (20 max). Static or impulsive operation. Over 1000 •billion combinations. Protection against forced deactivation

DK4000M cod. DK2100211Electronic reader to be housed inside the B-ticino® Magic modular series

To utilize this with the other devices (B-ticino®, Gewiss®, Ave® and Vimar®), •it is necessary to use the series of Elkron adaptors. DK4000M/B cod. DK2500211: same as DK4000M but in WHITE color

DK40 cod. DK0100211Electronic digital key. (PATENTED)

DKZ4/4000M cod. DK22002114 zones partialiser to be housed inside the B-ticino® Magic modular series;

To utilize this with the other devices (B-ticino®, Gewiss®, Ave® and Vimar®), •it is necessary to use the series of Elkron adaptors

DKR4 cod. DK09002114 relais outputs module.

DK21 System

DK21S cod. DK2300211Sistema di attivazione a microprocessore

The system manage up to 4 readers DK2000M with an illimitate number •of keys and up to 4 keypads KP100D. System part set: 3 sectorsRated voltage: 12Vdc. Serial line max lenght: 500 m•

DK2000M cod. DK2000111Electronic reader designed to be housed inside the B-ticino® Magic modu-lar series;

To utilize this with the other ranges of modular electrical devices (B-ticino®, •Gewiss®, Ave® and Vimar®), it is necessary to use the series of Elkron adaptors. 2 built-in inputs. WHITE color version is available cod. DK2000M/B (DK2400111)

DK20 cod. DK1700111Electronic digital key.

ACTIVATION SYSTEMS

DK41S

DK4000M

DK40

DKZ4/4000M

3° level

3° level

3° level

3° level

112


Electrical series adaptors

DKA/I cod. KT2200111Kit with 5 adaptors for the B-ticino® Light and B-ticino® International modular series designed for civil purposes

DKAB/I (KT2600111) WHITE version.•

DKA/L cod. KT2300111Kit with 5 adaptors for the B-ticino® Living modular series designed for civil purposes

DKAB/L (KT2700111) - WHITE version.•

DKA/G cod. KT2400111Kit with 5 adaptors for the Gewiss® Playbus® modular series designed for civil purposes

DKAB/G (KT2800111) - WHITE version.•

DKA/A cod. KT2500111Kit with 5 adaptors for the AVE® System 45 modular series designed for civil purposes.

DKAB/A (KT2900111) - WHITE version..•

NOTE: To utilize the DK4000 M reader and the DKZ4/4000 M partialiser module with the Vimar® Idea and Vimar 8000® series, it is necessary to make use of commercially available adaptors: Art. 16544 for Vimar® Idea® and Art. 08324 per Vimar® 8000

DKA/VI cod. KT7500111Kit with 5 adaptors for the Idea Vimar for civil purposes.

DKAB/VI cod. KT7600111- WHITE version.•

DKAB/VP cod. KT7700111Kit with 5 adaptors for the Plana Vimar for civil purposes

DKA/AXO cod. KT4C00111Kit with 5 adaptors for the AXOLUTE® for civil purposesDKAB/AXO cod. KT5C00111 - WHITE version.

DKA/EIK cod. KT6C00111Kit with 5 adaptors for the EIKON® for civil purposes

DKAB/EIK cod. KT7C00111 - WHITE version.•

ELECTRICAL SERIES ADAPTORS

DKA/A

DKA/G

DKA/I

DKA/L

DKA/VI

DKA/VP

113


Radiotransmitters

RX02 cod. RX3240143Saw and quartzed rolling-code radio-receivers with digital coding; they al-low remote control of devices

The functions of the receiver channels can be: IMMEDIATE, STEP BY STEP, •AT TIMER, and can be selected by four microswitches

TX02 cod. TX79501432 buttons transmitter.

TX02M cod. TX78501432 buttons mini transmitter.

AT01 cod. AT0410143Aerial with frequency 433,92 Mhz

Button

PA01-C cod. PL2300113Antirobbery push button, white colour, single key. Internal NC at rest con-tact.

Resettable by plastic key.•

RADIOTRANSMITTERS / BUTTONS

RB06 cod. RB0410113Watertight rechargeable accumulator 12 V 7,2 Ah.

RB12 cod. RB0110113Watertight rechargeable accumulator 6 V 1,3 Ah.

RB 19 cod. RB0310113Watertight rechargeable accumulator 12 V 2,2 Ah.

RB 15 cod. RB0810113Watertight rechargeable accumulator 12 V 18 Ah.




BATTERIES

RX02

TX02

PA01

114


AS02/S cod. PS3400111Power supply unit 1A

Switching back-up power supply in a plastic case. Room for an battery of •up to 2Ah. Equipped with control module for mains present, battery test, fuse break. Electrical outputs for reporting of failures and irregularities. Connector to connect with serial module EP200.Mains voltage: 100 Vac ÷ 260 Vac•Output voltage: 13,8 Vdc•Current: 1 A•Dimensions (H x W x D): 185 x 249 x 70 mm•

AS07/S cod. PS3500211Power supply unit 1A

Switching back-up power supply in a plastic case. Room for an battery of •up to 7Ah. Equipped with control module for mains present, battery test, fuse break. Electrical outputs for reporting of failures and irregularities. Connector to connect with serial module EP200.Mains voltage: 100 Vac ÷ 260 Vac•Output voltage: 13,8 Vdc•Current: 1 A•Dimensions (H x W x D): 345 x 240 x 79 mmmm•

AS15 cod. PS3200211Power supply unit 2,2A

Switching back-up power supply in a plastic case. Room for an battery of •up to 15Ah. Equipped with control module for mains present, battery test, fuse break. Electrical outputs for reporting of failures and irregularities. Connector to connect with serial module EP200.Mains voltage: 100 Vac ÷ 260 Vac•Output voltage: 13,8 Vdc•Current: 2,2 A•Dimensions (H x W x D): 318 x 422 x 91 mmmm•

AS27 cod. PS3300211Power supply unit 2,2A

Switching back-up power supply in a plastic case. Room for an battery of •up to 27Ah. Equipped with control module for mains present, battery test, fuse break. Electrical outputs for reporting of failures and irregularities. Connector to connect with serial module EP200.Mains voltage: 100 Vac ÷ 260 Vac•Output voltage: 13,8 Vdc•Current: 2,2 A•Dimensions (H x W x D): 447 x 324 x 115 mmmm•

POWER SUPPLY UNIT

AS02/S

AS07/S

AS15

AS27

2° level

2° level

Documents

CATALOGO 4 poison