Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
�
�
thyssenkrupp�Materials�Vietnam��
���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1��
�
�
�
� �
MATERIALS�FOR��OIL&GAS�INDUSTRY�
thyssenkrupp�Materials�Vietnam�
�
2��
Contents
INTRODUCTION�....................................................................................................................................�3
General�............................................................................................................................................�3
History�.............................................................................................................................................�3
-�OFFICES�AND�BRANCHES�-�..................................................................................................................�4
MATERIALS�FOR�OIL�AND�GAS�INDUSTRY�........................................................�Error!�Bookmark�not�defined.
Stainless�Steel�...............................................................................................................................�5-7
Drilling�tools�................................................................................................................................�8-10
Nickel�alloy�.................................................................................................................................�11-13
Beryllium Copper��.....................................................................................................................�14-14
�
�� �
�
3��
INTRODUCTION
General
ThyssenKrupp� is�one�of� the� large� industrial�groups�of�Germany�operating� in�main�fields�of�Materials� 1steel,�stainless�
steel,..3� and� Technologies� 1Elevator,� shipbuilding,� plant� technology3.� The� internationalization� of� group� has� been� developing�
continously� in� many� regions� and� territories;� human� resource� working� for� group� reaches� up� to� 183.000� people� in� over� 80�
countries�and�group�revenue�on�FY�2012�achieve�about�50�billion�Euro.�
ThyssenKrupp� Materials� Vietnam� (TKMV)� established� in� March� 2007� as� a� joint-venture� between� ThyssenKrupp�
Materials�Services�and�a�local�partner,�and�officially�operated�in�May�2007.�In�June�2012,�TKMV�became�100%�foreign�invested�
from�Germany.�At�present,�TKMV�has�03�offices�located�in�03�big�cities�of�Vietnam:�Hanoi,�Da�Nang�and�Hochiminh,�with�labor�
source�of�about�110�people.�
TKMV�has�become�one�of�the�biggest�suppliers�of�materials�and�processing�services�in�Vietnam,�with�06�main�product�
groups:� Stainless� steel� 1flat� and� long� product3,� Stainless� and� steel� tubes,� valves� and� fittings,� Non-ferrous� metals� –�
Copper� and� brass� 1copper,� brass,� bus� bar,...3,� Non-ferrous� metals� –� Aluminum� and� others� 1Aluminum� in� sheet,� coil,�
aluminum�alloy,� zinc,..3,�Tool�steels�and�special� steels� 1engineering� steel,�wear� resistant� steel3,�and�Plastic.�Operating�02�
warehouses�in�Hanoi�and�Hochiminh�with�thousands�of�product�ranges�in�stock,�TKMV�is�now�“The�biggest�and�most�diverse�
metal�distributor“�in�Vietnam�market.�TKMV�aims�to�become�A�reliable�partner�of�Manufacturers�with�Quality,�Prestige�and�
Professional�attitude.�
History
- By�15/03/2007,�based�on�Decision�no.�73/2006/QC-UB�of�The�Vinh�Phuc�People�Committee,�the�Vinh�Phuc�Industrial�
zone� Managemen� Board� invested� TKMV� with� the� License� of� Investment� No.� 192023000027� with� main� business� includes�
producing,�processing,�import-export�and�trading�in�metal�and�platic.�
- By�20/05/2008,�TKMV�opened�a�repesentative�office�in�Da�Nang�with�function�of�dealing�busniess�transactions�and�
being�a�bridge�between�company�and�customers�in�Middle�region.��
- By�28/11/2008,�The�Hochiminh�City�Export�Processing�and�Industrial�Zone�Authority�issued�License�of�Investment�for�
opening�Hochiminh�Branch�of�TKMV.�
- Since�established,�TKMV�has�upholded� its�strength,�developed�and�affirmed� its�prestige� in� field�of� trading,� import-
export�of�stainless�steel,�special�steel,�non-ferrous�metals,�tubes,�valves,�fittings,�and�platic�nationwide.�
� �
�
4��
- OFFICES AND BRANCHES - �
�
�
Headquarter�in�Hanoi:�
• Address : Lot 42C, Quang Minh Industrial zone, MeLinh dist.,
Hanoi, Vietnam
• Tel : (84-4) 3525 0555
• Fax : (84-4) 3525 0550
• Email : [email protected]
• Website : www.tkmvietnam.com.vn
• Tax code : 2500 2710 58
• Account : 201004039 at Citibank
17 Ngo Quyen str., Hoan Kiem dist., Hanoi,
Vietnam
�
�
�
Reprentative�office�in�Da�Nang:�
• Address : 40 Hoang Van Thai, Hoa Minh commune,
Lien Chieu dist., Da Nang, Vietnam
• Tel : (84-511) 3765 768
• Fax : (84-511) 3765 766
�
�
�
�
Hochiminh�Branch�in�Hochiminh:�
• Address : Lot II-1, street no. 1, Tan Binh Industrial Zone,
Tay Thanh commune, Tan Phu dist.,
Hochiminh city, Vietnam
• Tel : (84-8) 3816 3333
• Fax : (84-8) 5 4355 722
• Account : 201004039 at Citi Bank
�
�
5��
STAINLESS AND LOW ALLOYS
General tkMV offers a wide range of metellaurgical products made out of low alloys and stainless steel. Materials are used to a variety of active applications:
• Completion Tools,
• Down-Hole Drilling Tools,
• Electronic & Battery Housings,
• Flow Control Equipment,
• MWD/LWD Wireline Tools,
• Mud Motors,
• Pumps
• Rotor Bars,
• Drill Collars, Flex Collars, MWD Collars,
Sleeves Stabilizers,
• Subs, Super Slims (made from Non Mag
Solid Bar)
�
Common grades:
• Martensitic (Super 13Cr, AISI 410)
• Austenitic Grades (e.g. 304, 316, 347, Nitronic
50 & 60, 17-4 ANN, 17-4 HT )
• Duplex (22 Cr, e.g. 2205)
• Superduplex (25, e.g. 2507)
• Non Magnetic Steel Bars Amagnit 501/601
• Alloyed steel (4145H Mod.,4140,4130)
�
�
� �
�
6��
�Stock in tkMV
� �
Hot rolled coil and plates
Grade: SUS 304(L), 310S and 316L
Finish: 1D and No.1
Thickness from 3.0 to 50.0 mm
Width 1,500 mm
Length 6,000 mm
Round bar, cold drawn
H9/H10, in 316L and 310S - Diameter from 4mm up to 120mm - Length 6,000 mm
Cold rolled sheet and coil
Grade: SUS 304(L), 310S and 316L
Finish: 2B, BA, HL and No.1 and PVC coating
Thickness: 0.3mm to 6.0 mm
Width: 1,000mm; 1,219mm and 1,500 mm
Length 2,438~6,000mm; Coil
�
7��
DRILLING TOOL
General For more than 20 years, the thyssenkrupp Materials Oil & Gas Center of Excellence in France has been an industriy leader in the distribution and processing of steel as well as bottom assembly tubular products from the world’s leading mills and API/NS-1 facility sources, in order to satisfy the critical needs of Oil & Gas equipment manufacturers and international drilling contractors. Today, our materials and products can be found in a wide variety of active energy applications including:
• Bottom hole assembly tubular products,
• MWD/LWD Tools,
• Well heas and Christmas trees equipment,
• And other oilfield accessories
Products stocked in France include:
• Drill Collars
• Heavy Weight Drill Pipes
• Drill Pipes
• Kellys
• Stabilizers
• Non-Magnetic Collars
• Non-Magnetic LWD/MWD housings
�
Common grades:
• Alloyed Steel Grades: 4145Hmod
• Stainless steel grades: Non Mag 110 Ksi and
140 Ksi
�
� �
�
8��
STABILIZERS
General
Thyssenkrupp stabilizer has a single piece body
made of 4145 H modified alloy steel.
Heat treated to 285-341 Brinell hardness and 50
Joules charpy impact strength.
Be supplied in near bit or string configuration. They
are gaged to API 7-1 and NS1 specifications.
Finished stabilizers are available from thyssenkrupp
in all configurations and sizes.
Specifications
�
9��
NICKEL ALLOY
General Thyssenkrupp Materials Oil & Gas specilizes in the supply of the Nickel Alloys used in the most demanding applications. Through our global network of in-house metallurgical resources, we provide forged, rough-machined and fully-tested products to meet our customers‘ specific needs.
Among the toughest structural materials known.
Non-ferrous metals with high strength and
toughness, excellent corrosion resistance, and
superior elevated temperature properties.
Commercially pure nickel has good electrical,
magnetic, and magnetostrictive properties.
Nickel alloys are useful in applications that require:
• Magnetic properties • Corrosion resistance
• Wear resistance •
• Strength at elevated temperatures
Grades stocked in UK are:
• Alloy 718 (API & AMS) 1.00’’ to 12.00’’
• Alloy 625 NACE 2.00’’ to 10.00’’ • Alloy 725 1.25’’ to 3.5’’ • Alloy 925 for Forgings • Alloy 825 for Forgings
Forged/Machined shapes: Rings, flat bars, bored bars, stepped forgings
�
10��
Application
Grade Specification ASTM
Charpy Impacts Avg
Appication
718 NACE (N07718)
ASTM B6737 API 6 A 718 CBS_OG718.120
-75 F35 Ft-Ibs
Avg
Used for parts requiring high resistance to creep and stress rupture up to 1300°F (704°C) and oxidation resistance up to 1800°F (982°C). Good corrosion resistance and oxidation resistance in jet engine and gas turbine applications
718 SA (N07718)
ASTM B637 AMS 5662 5663
_ Hight Strength and creep ruture properties up to 1300 Degrees F, goood ductility, corrosion resistance. Products reguiring highh strength that does not have to meet requirements of NACE MRO175/ISO 15156. Heat treatment to meet customer specifications
Alloy 625 _ _
Use relatively heavy cuts and low speeds to minimize surface work hardening. This grades gages to 1200ºF (649˚C)
oxidation and scaling resistance up to
2000ºF (1093˚C).
Alloy 925 NACE
API 6A CBS_OG925.110
-75 F35 Ft-Ibs Avg
Used in down-hole and surface components including valves, hangers, tool joints, fasteners, shafting and high strength piping systems.
�
11��
Beryllium Copper (BeCu) Grades (UNS) Specification ASTM Characteristic Toughnmet3(C96900)(C72900) B505 High strength, low friction, non-
magnetic, anti-galling, corrostion, erosion and wear resistance. Instrument housings, bearings, couplings, actuator stems etc. Meets NACE MRO 175/ISO 15156
Brush alloy 25 A(TB00) (B601)(172000)
(ASTM B196, B251, B634) API 7 API 6A
High strength, low friction, non-magnetic, anti-galling,high hardness, thermal and electrical conductivity, corrosion, erosion and wear resistance. Instrument housings, bearings, couplings, actuator stems etc. Meets NACE
Brush alloy 25 A(TD04) (TB00)(B601)(C172000)
(ASTM B196, B251, B634) API 7 API 6A
High strength, low friction, non-magnetic, anti-galling,high hardness, thermal and electrical conductivity, corrosion, erosion and wear resistance. Instrument housings, bearings, couplings, actuator stems etc. Meets NACE
Brush alloy 25 AT (TB00) (B601)(C172000)
(ASTM B196, B251, B634) API 7 API 6A
High strength, low friction, non-magnetic, anti-galling,high hardness, thermal and electrical conductivity, corrosion, erosion and wear resistance. Instrument housings, bearings, couplings, actuator stems etc. Meets NACE
Brush alloy 25 A(TH04) (TB00)(B601)(C172000)
(ASTM B196, B251, B634) API 7 API 6A
High strength, low friction, non-magnetic, anti-galling,high hardness, thermal and electrical conductivity, corrosion, erosion and wear resistance. Instrument housings, bearings, couplings, actuator stems etc. Meets NACE