INDOOR VOLTAGE TRANSFORMERDPE-12N/TF, 24N/TF

DPE-12N/TF, 24N/TF

DPE-12NT

Dimension & Drawing

Technical dataOperating voltage (maximum) kV 7.2 12 17.5 24Rated power-frequency withstand voltage (1min) kV 20 28 38 50Impulse test voltage (1.2/50㎲ full wave) kV 60 75 95 125Rated frequency Hz 50/60 : Other frequencies on requestRated primary voltage kV 6.6/√3 11/√3 13.8/√3 22, 22.9/√3Rated secondary voltage V 110/√3Rated voltage factor/cont 1.9Vn/8h 1.5Vn/30sec, 1.9Vn/8hWeight (approx.) kg 23 33Model designation DPE 12N/TF 24N/TF

The DPE-xx epoxy insulated voltage transformers are cast in epoxy resin and designed mostly for insulation voltages of 7.2kV to 24kV.The primary and the secondary windings and core are fully cast in epoxy resin which makes the main insulation and a housing of transformers.The secondary windings are lead out into a cast-type secondary terminal board. The secondary terminal board is covered with a sealed plastic over.The DPE-xx is equipped with a fuse conformably to IEC standard.

Epoxy수지를 진공성형한 제품이며 7.2kV부터 24kV까지 고압측 장비를 측정하거나 보호하기위한 전력기기장치의 보호 및 측정을 위해 사용가능합니다. Fuse Type은 2차사고 예방이 가능하며 외형 및 설치사양이 유럽표준형으로 설계되어 설치 및 유지보수가 용이합니다.IEC규격의 퓨즈를 장착하여 사용할 수 있습니다.

DPE-24NT

242

Dimension & Drawing

DPE-12NTF

DPE-24NTF

243

VT