catalog laser.pdf

katalog laser 2011 en.qxp 06.05.2011 10:10 Seite 1

Laser technology made by Nedo

Engineering expertise

Our team of highly qualified engineers and developers has many years of experience in the design of optical,electronic and mechanical components and products. The development of new construction lasers is influencedby this experience and by numerous ideas gained in practice.Nedo lasers are designed for professionals who expect uncompromised quality, ease of handling and reliabilityeven under the toughest conditions on the construction site.

Design

The high quality standards of our lasers are also reflected in the product design. The cross line laser QUASAR6 and the rotating laser series PRIMUS2 have both been rewarded with the internationaldesign prize of Baden-Wrttemberg - Focus in Silver - in 2010 and with the prestigious red dot design awardin 2011.

Manufacturing expertise

As a manufacturer of top-grade construction lasers, Nedo places a high value on qualified staff, regular trainingand the very latest manufacturing technology. Our laser products are assembled in clean-room environments.Nedo uses high-quality components such as NiMH batteries with Eneloop technology and carefully executesall assembly and adjustment processes. In addition, it has intensive quality controls, all serving a single aim:customer satisfaction.

Service

Thanks to our manufacturing know-how and our state of the art testing and calibration facilities we can serviceand calibrate our lasers quickly and professionally. Spare parts are available at short notice at any time.Repairs can be carried out quickly and efficiently, and thanks to our well-organised transport logistics, therepaired item can be returned swiftly and reliably to the customer.Our skilled field service staff is at the disposal of our specialist dealers, ready to support them with advice forthe users.

Nedo GmbH & Co. KG y Hochgerichtstrasse 39-43 y D-72280 Dornstetten y www.nedo.com y [email protected]

QUASAR6 PRIMUS2


Contents and Product Range

Product LaserRef.-No. Application functionality Laser configuration Levelling type Page

PointLaser 1 Interior finishing Dot laser 1 or 2 laser dots Manual 1460 923 or 1 laser line

Floor Laser 2 Interior finishing Line laser 2 laser lines 1460 929-613

CrossLiner 2 Pocket Interior finishing Cross line 1 cross on the wall Automatic/ 2460 914 laser pendulum

CrossLiner 2 Interior finishing Cross line 1 cross on the wall Automatic/ 3460 917 laser pendulum

CrossLiner 3 Pro-Set Interior finishing Cross line 1 cross on the wall Automatic/ 4460 918 laser 1 vertical line pendulum

CrossLiner 4 Pro-Set Interior finishing Cross line 2 crosses on the wall Automatic/ 5460 919 laser 1 cross on the ceiling pendulum

1 plumb beam

QUASAR6 Interior finishing Cross line 1 cross on the wall Automatic/ 6460 930 and exterior laser 1 cross on the ceiling pendulum

applications 3 vertical lines1 plumb beam

ECO600 H Civil engineering Rotating laser 360 laser line Fully automatic/ 7/8471 910-613 horizontal 1 plumb beam motorised

ECO600 HV Interior finishing Rotating laser 360 laser line Fully automatic/ 9/10471 900-613 Civil engineering horizontal/vertical 2 plumb beams motorised

ECO600HVgreen Interior finishing Rotating laser 360 laser line Fully automatic/ 11/12471 920-613 horizontal/vertical 2 plumb beams motorised

PRIMUS2 H Civil engineering Rotating laser 360 laser line Fully automatic/ 15/16472 020 Landscaping horizontal motorised

PRIMUS2 H2N Civil engineering Rotating laser 360 laser line Fully automatic/ 17/18472 030 Landscaping Dual slope laser motorised472 031/472 032

PRIMUS2 HVA Interior finishing Rotating laser 360 laser line Fully automatic/ 19/20472 050 Civil engineering horizontal/vertical 1 plumb beam motorised

Landscaping AutoAlign function

PRIMUS2 HVA2N Interior finishing Rotating laser 360 laser line Fully automatic/ 21/22472 060 Civil engineering Dual slope laser 1 plumb beam motorised

Landscaping horizontal/verticalAutoAlign function

TUBUS1 Sewer Pipe laser Fully automatic/ 23/24472 200 construction motorised

Laser Accessories

Laser Receivers, Laser Accessories PRIMUS2, Flexi Rods, Laser mEssfix-S, Laser Accessories 25-31


Dot Lasers

Page 1

PointLaser 1

This is an all-purpose laser spirit levelfor simple levelling, aligning andplumbing jobs. It features a slip-onbeam splitter for measuring rightangles and a slip-on rotating lineoptics for particularly easy handlingwhen carrying out levelling andaligning. It comes as a complete setwhich includes an integrated clampingmagnet, adjustable and removable feetand Velcro tapes for fixing the deviceto beams. A carrying case and batte-ries are also included.

Ref.-No. 460 923

Features:

y 1 laser dot, 2 square laser dots or1 laser line

y Adjustable, removable feet

y Integrated magnet

Technical data:

Sensitivity of bubble 30/2 mmAccuracy 0.42 mm/mWorking range approx. 100 mLaser < 1 mW laser class 2 / 650 nm Power supply 3 x 1.5 V AA batteriesOperation duration approx. 100 hRef.-No. PointLaser 1 460 923

Scope of delivery PointLaser 1:PointLaser 1 with line optics, beam splitter,Velcro tapes, batteries and case

Floor Laser 2

The professional laser tool for floorand wall tiling.At the push of a button Floor Laser 2gives you two perfect 90 laser lineson the floor or wall.

Features:

y 2 perfect 90 laser lines

y Highly visible laser beams; canbe switched on separately

y 2 spirit levels for an exactalignment of the Floor Laser 2

y Angle scale for angle measurements

Technical data:

Angle accuracy of laser lines 3.5Working range approx. 10 mLaser laser class 2 / 635 nm Power supply 2 x 1.5 V AA batteriesOperation duration 35 h - 70 hRef.-No. Floor Laser 2 460 929-613

Scope of delivery Floor Laser 2:Floor Laser 2 and batteries

Perfect for all floor or wall tiling projects.

Line Lasers

Ref.-No. 460 929-613


Line Lasers

Technical data:

Accuracy 0.3 mm/mSelf-levelling range 4Working range 10 mLaser laser class 2 / 635 nm Power supply 3 x 1.5 V AA batteriesOperation duration approx. 20 h - 40 hRef.-No. CrossLiner 2 Pocket 460 914

CrossLiner 2 Pocket

Self-levelling cross line laser for fast levelling andaligning. CrossLiner 2 Pocket is always ready to hand thanks to the compact dimensions.

Features:

y 1 laser cross, created by a horizon-tal and a vertical laser line

y Self-levelling function; can bedeactivated

y Inclination function

y Magnetic damping

y Compensator lock for transporta-tion

y Multifunctional foot with 1/4 and5/8 thread, with strong magnetsand fastening belt

Perfect for fast and precise level-ling and aligning, especially forapplications such as:

y Tiling

y Dry wall construction

y Ceiling construction

y Installation of doors and windows

y Steel construction

y Paintwork

y Electrical installations

y Sanitary installations

Perfect forlevelling and aligning

Page 2

Scope of delivery CrossLiner 2 Pocket:CrossLiner 2 Pocket with multifunctional foot,batteries and bag


CrossLiner 2 Pro-Set


Self-levelling cross line laser for fast levelling and aligning. CrossLiner 2 sets standards in terms of precision,easy handling and visibility of laser beams.

Technical data:

Accuracy 0.3 mm/mSelf-levelling range 3Working range approx. 10 mLaser laser class 2 / 635 nm Power supply 3 x 1.5 V AA batteriesOperation duration approx. 25 h - 65 hRef.-No. CrossLiner 2 Pro-Set 460 917

Features:

y 1 laser cross, created by one hori-zontal and one vertical laser line

y Self-levelling function

y Compensator lock for transportation

y Magnetic damping

y Highly visible laser beams; can beswitched on separately

y Turntable with 5/8 thread and360 graduation

Perfect for fast and precise level-ling and aligning, especially forapplications such as:

y Tiling

y Interior finishing





y Paintwork



Scope of delivery CrossLiner 2 Pro-Set CrossLiner 2, turntable, wall mount, magnetic bracket, target board, laser glasses, batteries and bag Ref.-No. 460 917

Perfect for levelling and aligning

Page 3




Self-levelling cross line laser for levelling, aligningand marking 90 angles. A third laser diode generates a vertical line at an angle of 90 to thecross lines. Ideal for use in dry wall constructionwhen aligning partitions or for aligning and markingright angles on tiling.

Technical data:

Accuracy 0.3 mm/mSelf-levelling range 3Working range approx. 10 mLaser laser class 2 / 635 nm Power supply 3 x 1.5 V AA batteriesOperation duration approx. 25 h - 65 hRef.-No. CrossLiner 3 Pro-Set 460 918

Features:

y 1 laser cross and one verticallaser line, created by one horizon-tal and two vertical laser lines



y Magnetic damping

y 3 highly visible laser beams; canbe switched on separately

y Turntable with 5/8 thread and360 graduation

Perfect for levelling, aligning andmarking right angles, especially forapplications such as:

y Tiling






y Paintwork



SSccooppee ooff ddeelliivveerryy CCrroossssLLiinneerr 33 PPrroo--SSeett CrossLiner 3, turntable, wall mount,magnetic bracket, target board,laser glasses, batteries and bag

RReeff..--NNoo.. 446600 991188

Perfect for levelling, aligning and marking 90 angles

Page 4




Self-levelling cross line laser for levelling, aligning,plumbing and marking right angles. Two verticallaser lines at an angle of 90 and one horizontal laserline generate a cross on two walls and on the ceiling.The plumb beam transfers the cross from the ceilingto the floor.Multi-purpose instrument.

Technical data:

Accuracy 0.3 mm/mSelf-levelling range 3Working range approx. 10 m Laser laser class 2 / 635 nm Power supply rechargeable batteries (NiMH, 2000 mAh)Operation duration approx. 15 h - 30 hRef.-No. CrossLiner 4 Pro-Set 460 919

SSccooppee ooff ddeelliivveerryy CCrroossssLLiinneerr 44 PPrroo--SSeett CrossLiner 4, wall mount, floor trivet,target board, laser glasses, rechargeablebatteries, charger and aluminium case

RReeff..--NNoo.. 446600 991199

Features:

y 3 laser crosses, created by onehorizontal and two vertical laserlines



y Magnetic damping

y Highly visible laser beams; can beswitched on separately

y Integrated turntable with 1/4thread, 5/8 thread and 360graduation

Perfect for levelling, aligning andmarking 90 angles, especiallyfor applications such as:

y Tiling






y Paintwork



Page 5

Perfect for levelling, aligning and marking 90 angles


QUASAR6

Perfect for levelling, aligningand marking 90 angles

Page 6

Technical data:

Accuracy 3.0 mm/10 mSelf-levelling range 3.5Working range 25 m without receiver (depending on lighting conditions) 50 m with receiverLaser laser class 2M / 635 nm Protection class IP 54Power supply rechargeable batteries (NiMH, 2300 mAh)Operation duration approx. 15 hRef.-No. QUASAR6 460 930Ref.-No. QUASAR6 Set 460 932 Ref.-No. ACCEPTORline 430 326-613

SSccooppee ooff ddeelliivveerryy QUASAR6 SetCross line laser, laser receiverACCEPTORline with rod clamp, target board, adapter plate for tripods with 5/8 thread, laserglasses, rechargeable batteries,charger and case

RReeff..--NNoo.. 446600 993322

SSccooppee ooff ddeelliivveerryyQUASAR6

Cross line laser, target board,adapter plate for tripods with5/8 thread, laser glasses,rechargeable batteries, chargerand case

RReeff..--NNoo.. 446600 993300

Made

in Ge

rman

y

QUASAR6

Self-levelling cross line laser for levelling, aligning,plumbing and marking 90 angles. Four vertical laserlines and one horizontal laser line generate a cross onone wall and on the ceiling. An additional plumbbeam transfers the cross from the ceiling to thefloor. Suitable laser for interior finishing andexterior applications.

Features:

y Highly visible laser beams; can be switched onseparately

y Reliable self-levelling function


y Tangent screw for fine adjustment

y Reliable magnetic damping

y Pulse mode for outdoor use of laserreceiver

y Quick charge, max. 2.5 h to charge

y 5/8 thread

y Rugged design with shock protection system

y Run charge function

Perfect for levelling, aligning andmarking right angles, especially forapplications such as:

y Tiling






y Paintwork




ECO600 H is the robust, fully automatic rotating laser for horizontal applications.Perfect for all levelling jobs on the construction site, such as casting concrete floors orfoundations, for excavating and masonry jobs and for landscaping.ECO600 H features an excellent range of functions at a very attractive price.

Page 7


ECO600 HFully automatic horizontal rotating laser for civil engineering

Technical data:

Levelling accuracy 1 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlWorking range approx. 400 m with receiverLaser < 5 mW, laser class 3R, 635 nm Rotating speed 600 rpmProtection class IP 54Power supply NiMH rechargeable batteries 4.8 V, 3800 mAhOperation duration approx. 30 hRef.-No. ECO600 H 471 910-613 Ref.-No. ECO600 H Set 471 911

Technical data of receiver ACCEPTOR1 on page 25

ECO600 H Set inclusive

y Aluminium tripod,

working range 1.02 m to 1.65 m

y Flexi Rod with universal adapter and

carrying bag

Ref.-No. 471 911

Features:

y Fully automatic horizontal laser for exterior applications

y Self-levelling range 5 motor-powered, with automatic level control

y High-power laser diode (3R) for very good laserbeam visibility

y Automatic level control stops the laser if it receivesa heavy jolt. In this way, height errors are avoided.

y Downward plumb beam

y Sturdy housing, splash-proof to IP 54

y Rotor protection made of breakproof glass

y High-power NiMH rechargeable batteries for longoperation

Ideal for use on every construction site. Perfect forlevelling in applications such as:

y Casting concrete floors

y Fine grading

y Bricklaying

y Excavation work

y Landscaping

Also avail

able as a

set

Scope of delivery ECO600 H:

Rotating laser, laser receiver ACCEPTOR1 with rodclamp, rechargeable batteries, charger and case

Page 8


ECO600 HV is the universal horizontal/vertical rotating laser for clever craftsmen.It is ideal for levelling and aligning in interior outfitting and construction.ECO600 HV combines optimum functionality, a full range of features and anattractive price-performance ratio.

Page 9


ECO600 HVThe fully automatic rotating laser for horizontal and verticalapplications for clever craftsmen

Technical data:

Levelling accuracy 1 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlWorking range approx. 300 m with receiverLaser < 5 mW, laser class 3R, 635 nm Rotating speed 0, 60, 120, 300 and 600 rpmScanning angle 0, 6, 20, 50 and 90Power supply NiMH rechargeable batteries 4.8 V, 3800 mAhOperation duration approx. 30 hRef.-No. ECO600 HV 471 900-613Ref.-No. ECO600 HV Set 1 471 901 Ref.-No. ECO600 HV Set 2 471 902 Ref.-No. ECO600 HV with ACCEPTORdigital 471 903-613Ref.-No. ECO600 HV complete set 471 904

Technical data of laser receiver ACCEPTOR1 and ACCEPTORdigital on page 25

ECO600 HV Set 1 inclusive

y Elevating tripod, working range 0.80 m to 2.76 m

y Flexi Rod with universal adapter and carrying bag

Ref.-No. 471 901

ECO600 HV Set 2 inclusive



Ref.-No. 471 902 Page 10

Scope of delivery ECO600 HV complete set:

Rotating laser, laser receiver ACCEPTOR1 with rodclamp, target board, wall mount, vertical mount,rechargeable batteries, charger, remote control andcase

Also avail

able as a

set

Scope of delivery ECO600 HV:

Rotating laser, laser receiver ACCEPTOR1 with rodclamp, rechargeable batteries, charger, remotecontrol and case

Features:

y Fully automatic horizontal/vertical laser for interioroutfitting and exterior applications

y High-power laser diode (laser class 3R) for verygood laser beam visibility


y Upward and downward plumb beam

y Manual setting of slopes in 2 axes

y Scanning function and dot mode


y Rotor protection made of break-proof glass


y Remote control for a convenient handling

Ideal for use on every construction site. Perfect forlevelling in applications such as:

y Casting concrete floors



y Laying screed

y Masonry and excavation work

y Landscaping


The green laser beam guarantees optimum visibility, even under unfavourable lighting conditions.It permits working without a laser receiver even in bright daylight, with dark surfaces or overlong distances. Fully automatic horizontal and vertical alignment of the laser beam ensures easyhandling at all times. Perfect for levelling, alignment and transferring heights in interior finishing.Thanks to excellent visibility, simple handling and a complete range of features, the ECO600 HV green is the perfect interior finishing laser for clever craftsmen.

Page 11

Wide oper

able temp

erature

range 0C

up to + 40

C


ECO600 HV green Set 1 inclusive



Ref.-No. 471 921

Page 12

Technical data:

Levelling accuracy 1 mm/10 mSelf-levelling range 5 motor-powered, with automatic level

controlWorking range approx. 300 m with receiverLaser < 5 mW, laser class 3R, 532 nm Operating temperature 0C to + 40CRotating speed 0, 60, 120, 300 and 600 rpmScanning angle 0, 6, 20, 50 and 90Protection class IP 54Power supply rechargeable batteries NiMH 4.8 V, 3800 mAhOperation duration approx. 15 hRef.-No. ECO600 HV green 471 920-613 Ref.-No. ECO600 HV green Set 1 471 921

Ref.-No. ECO600 HV green complete set 471 922

Scope of delivery ECO600 HV complete set:

Rotating laser, laser receiver ACCEPTOR ECOgreen

with rod clamp, target board, wall mount, verticalmount, rechargeable batteries, charger, remotecontrol and case

Also avail

able as a

set

Features:

y Green laser beam with high-power laser diode (laserclass 3R) for optimum visibility, even under unfa-vourable lighting conditions

y Fully automatic horizontal and vertical alignment foreasy handling

y Self-levelling range 5, with motor-powered levelling



y Scanning function and dot mode

y Upward and downward plumb beam




Ideal for interior applications. Perfect for levellingand aligning jobs, especially in the following areas:


y Interior decorating


y Floor construction


y Interior construction

y Installation of windows, doors and facades

Scope of delivery ECO600 HV green:

Rotating laser, laser receiver ACCEPTOR ECOgreen

with rod clamp, rechargeable batteries, charger,remote control and case


Nedo is the new series of fully automatic rotating lasers for professionals.Ideal for levelling, aligning and grade control. Reliable and rugged for tough constructionjobs. Uncompromising quality for professionals. The high-power laser diode with laserclass 3R ensures clear beam visibility even under poor lighting conditions. The

series sets a new standard for fully automatic rotating lasers.


The new standard for fully automatic rotating lasers

Made

in Ge

rman

y

Included as standard:carefree package with

y 3-year warrantyy Free annual check during the

warranty period

The standard for accuracy

Many rotating lasers are accurate but unfortunately only on paper.The rotating lasers of the series are highly accurate underall operating conditions: In driving rain, in freezing cold or in blazing heat.Whenever you need the very best.

The standard for easy operation

Are you tired of over-complicated handling?Then you will be delighted by the simple, intuitive operation of the new

rotating lasers. The LC display shows the operating state,rotation speed and battery level, and in the H2N andHVA2N it also clearly gives you the inclination on the X and Y axes.

The standard for reliability

The rotating lasers of the series are waterproof and dustproof to IP 66 and perform reliably even under the most extreme conditions in heat, in dust and at freezing temperatures. To clean afteruse, lasers can even be hosed down.

The standard for ruggedness

Thanks to their innovative shock protection system, the new rotatinglasers of the series can easily withstand a fall from aheight of 1 m. The thick lining and rotor protection provide additionalsafety.

The standard for long life

High-power, rechargeable NiMH batteries with EneloopTM technologyensure a long operating life of more than 100 hours, with minimalself-discharging. The intelligent power compartment permits quickchanging between battery and rechargeable battery operation.


Optional accessory Outdoor package

y Aluminium tripod with integrated Quick-Fix

release, working range 1.07 m to 1.71 m


Ref.-No. 200 350

Page 15


PRIMUS2 HThe fully automatic horizontal rotating laser for professionals

Technical data:

Levelling accuracy 0.5 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlWorking range approx. 700 m with receiver ACCEPTORpro

Laser < 5 mW, laser class 3R, 635 nm Rotating speed 600 rpmProtection class IP 66Operation duration approx. 100 h

Features:

y Fully automatic rotating laser for horizontal applications

y Robust, motor-powered levelling

y Large, clear display showing rotation speed, batterylevel, etc.

y High-power laser diode, laser class 3R, for highlyvisible laser beam and easy work at the close range


y Extremely easy to use


y Laser receiver ACCEPTORpro

y Highly accurate even under toughest conditions

Ideal for use on every construction site.Perfect for levelling in applications such as:

y Rough and fine grading

y Depth control for excavations

y Machine automation

y Casting concrete

y Bricklaying

y Laying screed

y Setting foundations and footings

y Landscaping

PRIMUS2 H Ref.-No. 472 020 Incl. transport case, laser receiver ACCEPTORpro, rod clamp, rechargeable batteries and charger

Optional accessory:Outdoor package Ref.-No. 200 350Technical data of receiver ACCEPTORpro on page 26

Scope of delivery Primus2 H

Page 16 Made

in Ge

rman

y

Now with

ACCEPTOR

pro


For horizontal use and forslopes in one or two axes

Optional accessoryTelescopic sightRef.-No. 461 096

Page 17


PRIMUS2 H2NFully automatic dual slope laser for true professionals

Features:

y Fully automatic dual slope laser

y Robust, motor-powered levelling

y Direct grade entry for the x and y axes

y Slope values once input are stored upon switch-off

y Large, clear display showing inclination, rotationspeed, battery level, etc.

y High-power laser diode, laser class 3R, for highlyvisible laser beam and easy work at the close range




y Radio remote control for a convenient handling


y Elevation control



y Machine automation

y Casting concrete

y Bricklaying

y Laying screed


y Landscaping

Optional accessory Outdoor package

y Aluminium tripod with integrated Quick-Fix

release, working range 1.07 m to 1.71 m


Ref.-No. 200 350

Page 18

PRIMUS2 H2N Ref.-No. 472 030Incl. transport case, rechargeable batteries and charger

PRIMUS2 H2N Ref.-No. 472 031Incl. multi function module COMMANDER2 H2N (laser receiver incl. radio remote control),rod clamp, rechargeable batteries, charger and transport case

PRIMUS2 H2N Ref.-No. 472 032Incl. laser receiver ACCEPTORdigital, rod clamp, rechargeable batteries, charger and transport case

Optional accessory:Telescopic sight Ref.-No. 461 096 Outdoor package Ref.-No. 200 350Technical data of receiver ACCEPTORdigital and multi function module COMMANDER2 H2N on page 25/26

Scope of delivery Ref.-No. 472 031Primus2 H2N incl.COMMANDER2 H2N Ma

de in

Germ

any

Technical data:

Levelling accuracy 0.5 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlSetting of slopes in two axes 10%, direct entryWorking range approx. 700 m with receiver COMMANDER2 H2NLaser < 5 mW, laser class 3R, 635 nm Working range radio remote control approx. 50 mRotating speed 600 rpmProtection class IP 66Operation duration approx. 100 h


AutoAlign function saving time in many applications

At the push of a button, the laser plane automatically alignswith the laser receiver COMMANDER2 HVA. Ideal when batter boards are used or on facade construction.The working range of the AutoAlign function is 50 metres.


PRIMUS2 HVAThe fully automatic horizontal/vertical rotating laserwith AutoAlign function for professionals

Features:

y Fully automatic rotating laser for horizontal and vertical applications

y AutoAlign function: automatic alignment of the laser beam to the zero mark of the laser receiverCOMMANDER2 HVA

y Robust motor-powered levelling

y Large, clear display showing rotation speed, batterylevel, etc.



y Scan function and dot mode

y Upward plumb beam







y Concrete casting

y Concrete formwork

y Bricklaying

y Landscaping

y Laying screed

y Drywall installation


y Facade construction

Optional accessory Indoor package 1



Ref.-No. 210 350




Ref.-No. 210 351

PRIMUS2 HVA Ref.-No. 472 050 Incl. transport case, magnetic target board, multi function module COMMANDER2 HVA (laser receiver incl. radio remote control), rod clamp, rechargeable batteries and charger

Optional accessory:Indoor package 1 Ref.-No. 210 350 Indoor package 2 Ref.-No. 210 351Technical data of receiver COMMANDER2 HVA on page 26

Scope of delivery PRIMUS2 HVAPage 20

Technical data:

Levelling accuracy 0.5 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlSetting of slopes in two axes manualWorking range approx. 500 m with receiver COMMANDER2 HVALaser < 5 mW, laser class 3R, 635 nm Working range radio remote control/AutoAlign approx. 50 mRotating speed 10, 60, 300 and 600 rpmScanning angle 0, 5, 10 and 15Protection class IP 66Operation duration approx. 100 h

Made

in Ge

rman

y


For horizontal use and forslopes in one or two axes

Dual slope functionAutoAlign function saving time in manyapplications

At the push of a button, the laser planeautomatically aligns with the laser receiverCOMMANDER2 HVA2N. Ideal when batter boards are used or onfacade construction.The working range of the AutoAlign functionis 50 metres.


PRIMUS2 HVA2NThe fully automatic horizontal/vertical dual slope laserwith AutoAlign function. The all-rounder for professionals.

Features:

y Fully automatic rotating laser for horizontal and vertical applications

y AutoAlign function: automatic alignment of the laser beam to the zero mark of the laser receiverCOMMANDER2 HVA2N

y Direct grade entry for the x and y axis

y Robust motor-powered levelling

y Large, clear display showing inclination, rotationspeed, battery level, etc.


y Scan function and dot mode

y Upward plumb beam







y Concrete casting

y Use of batter boards

y Bricklaying

y Landscaping

y Laying screed

y Drywall installation


y Facade construction

y Setting reference markers





Ref.-No. 210 350




Ref.-No. 210 351

PRIMUS2 HVA2N Ref.-No. 472 060Incl. transport case, magnetic target board, multi function module COMMANDER2 HVA2N (laser receiver incl.radio remote control), rod clamp, rechargeable batteries and charger

Optional accessory:Indoor package 1 Ref.-No. 210 350Indoor package 2 Ref.-No. 210 351Technical data of receiver COMMANDER2 HVA2N on page 26

Scope of delivery PRIMUS2 HVA2NPage 22

Technical data:

Levelling accuracy 0.5 mm/10 mSelf-levelling range 5 motor-powered, with automatic level controlSetting of slopes in two axes manualWorking range approx. 700 m with receiver COMMANDER2 HVA2NLaser < 5 mW, laser class 3R, 635 nm Working range radio remote control/AutoAlign approx. 50 mRotating speed 10, 60, 300 and 600 rpmScanning angle 0, 5, 10 and 15Protection class IP 66Operation duration approx. 100 h

Made

in Ge

rman

y


Pipe Laser TUBUS1

Uncompromising quality for professionals, reliable and rugged for tough construction jobs.Thanks to its compact dimensions, in particular its short length, TUBUS1 can even be used in tight pipe bends. The high-power laser diode provides a long range and ensures clear beam visibility at any time.


Pipe laser TUBUS1Extremely robust, extremely compact, for professionals

Page 24

Technical data:

Levelling accuracy 5 mm/100 mSelf-levelling range - 15 % to + 45 %Gradient range - 10 % to + 40 %Display resolution 0.001 %Laser max. 5 mW, laser class 3R, 635 nm Operating temperature - 20C to + 50CProtection class IP 68Operation duration approx. 40 hWeight approx. 3.5 kgRef.-No. 472 200

Features:

y Extremely robust pipe laser with full-metal housing

y Compact dimensions for use in tight pipe bends

y Reliable motor-powered levelling

y Direct grade entry: - 10 % to + 40 %

y Including a set of 4 feet for easy adjustment to different pipe diameters

y Motorised transverse adjustment and automatic centre of range return

y Perfect visualisation of operation mode: Green display for rising gradients, red display for fallinggradients

y Align-function to raise the laser beam out of thetrench for easy line setup

y Red high-power laser diode for very good beam visibility

y Remote control for easy and convenient handling

y Rechargeable lithium-ion batteries for long operatinglife and quick charging

TUBUS1 - the rugged pipe laser made to perform under toughest conditions. Perfect for:

y Sewer construction

y Laying gravity flow pipes

y Installation of drainage systems

Scope of delivery pipe laser TUBUS1:Pipe laser, remote control, rechargeable batteries andcharger, set of feet, adjustable in height target boardand transport case


Laser Receivers

ACCEPTORdigital

Features:

y Large LC display on front andback

y Displays height difference between laser level and zero linein mm

y 2 different zero positions can beselected

y Size of directional arrow is pro-portional to difference in height

y Features an extra large 127 mmdetector field

y Hold function keeps a value on the display

y Automatic switch-off

y Display of remaining battery power

y Bubble for easy alignment

y Rod clamp for laser receiver

Technical data:

Accuracy 0.5 mm, 1.0 mm, 2.0 mm, 5.0 mm, 10 mmWorking range approx. 450 m (depends on laser)Protection class IP 67Power supply 2 x 1.5 V AA batteriesOperation duration approx. 60 hRef.-No. 430 328

Ref.-No. 430 328

Page 25

Laser rece

iver with

digital disp

lay

Machine control receiver CR600

Features:

y Good visible LED and LC display onfront

y Audible signal can be switched off


y Magnetic holder for attachment tomachines, steel beams etc.


Technical data:

Accuracy switchable, 0.1 mm, 1.0 mm, 1.5 mm 3.0 mm, 6.0 mm, 10 mm, 25 mm

Working range approx. 450 m (depends on laser)Protection class IP 54Power supply 3 x 1,5 V AA batteriesOperation duration approx. 100 hRef.-No. 430 329

Ref.-No. 430 329

Laser rece

iver for

machine c

ontrol

applicatio

ns

ACCEPTOR1

Features:

y Large LC display on front and back

y Two accuracy modes

Technical data:

Sensitivity coarse/fine switchable, 3.0 mm / 1.5 mmWorking range (radius) approx. 200 m (depends on laser)Protection class IP 65Power supply 9 V batteryOperation duration approx. 50 hRef.-No. 430 325-613

Ref.-No. 430 325-613

y Bubble for easy alignment

y Audible signal can be switched off



Sturdy uni

versal

receiver


ACCEPTORpro

Features:

y Extremely robust laser receiver

y Large detector field


y Bright LED display

y Adjustable volume


Ref.-No. 430 372

Technical data:

Accuracy switchable, 0.5 mm, 1.0 mm, 2.0 mm 4.0 mm

Length of detector field 70 mmWorking range 700 m (depends on laser)Protection class IP 66Operating temperature - 20C to + 50CPower supply 3 x 1.5 V batteries (AA) or rechargeable

batteries (NiMH)Operation duration approx. 100 h Ref.-No. 430 372

Technical data:

Accuracy switchable, 0.5 mm, 1.0 mm, 2.0 mm 4.0 mm

Length of detector field 70 mmWorking range 700 m (depends on laser)Protection class IP 66Operating temperature - 20C to + 50CPower supply 3 x 1.5 V batteries (AA) or rechargeable

batteries (NiMH)Operation duration approx. 100 h Ref.-No. 430 370 COMMANDER2 HVA

430 371 COMMANDER2 H2N430 373 COMMANDER2 HVA2N

Multi function moduleCOMMANDER2

Features:

y Robust laser receiver with integratedradio remote control


y Plain-language LCD display showingall the data of the PRIMUS2

displays

y Bright LED display

y Adjustable volume

y Large detector field


y Extremely robust

y Easy to handle


y Available for all PRIMUS2models

y Made in Germany

Laser receiver for PRIMUS2 series

y Easy to handle


y Made in Germany

Laser rece

iver incl.

radio remo

te control

Extremely

robust

laser rece

iver

Made in Germany

Made in Germany

Extra large

detector fi

eld


Accessories PRIMUS2

Outdoor package

y PRIMUS2 tripod with integrated Quick-Fix release, working range 1.07 m to 1.71 m

y Flexi Rod with universal adapter andcarrying bag

Ref.-No. 200 350

Indoor package 1

y Elevating tripod,working range 0.80 m to 2.76 m


Ref.-No. 210 350

Indoor package 2



Ref.-No. 210 351

PRIMUS2 tripod

Sturdy aluminium tripod with inte-grated Quick-Fix locking system.Fasten the fully automaticPRIMUS2 rotating laser onthe new PRIMUS2 tripod injust seconds.Simply place the laser on the tripodand push the lever. That's it.Easy, safe and quick. The 5/8retaining screw is now a thing ofthe past!

Ref.-No. 200 202 Telescopic sight Ref.-No. 461 096

Ref.-No. 461 096

Technical data:Min. effective height 1.07 mMax. effective height 1.71 mRetracted length 1.15 m Weight 5.00 kgTripod head Quick-Fix, l 140 mm

Made in Germany


Accessories PRIMUS2

Page 28

Battery compartment

Additional battery compartment forall PRIMUS2 models.(Without batteries)

Ref.-No. 461 097

Supplementary rechargeable battery set with charger

Rechargeable battery add-on set for all PRIMUS2 models, incl. charger.

Ref.-No. 461 098

Battery compartment

Supplementaryrechargeablebattery set

with charger

Batter board holder

On modern construction sites the batterboard is increasingly being supplantedby a rotating laser. The laser is, invertical operation, placed on a batterboard holder fastened to the batterboard by a clamping screw. The batterboard holder is provided with a turntableallowing rough alignment of the rotatinglaser.The laser receiver with the receiverholder is clamped on the opposite sideof the batter board. Thanks to the AutoAlign function, thelaser plane automatically aligns with thelaser receiver COMMANDER2 inthe case of the PRIMUS2 HVAand PRIMUS2 HVA2N models.Furthermore, the laser plane is automati-cally monitored and if necessary correc-ted by the AutoAlign function.

PRIMUS2 Quick-Fix

It takes just a second to attach yourPRIMUS2 to any tripod!The Quick-Fix base plate is attachedto the tripods retaining screw. Simplyfix and release the PRIMUS2

laser by throwing a lever.

Ref.-No. 572 112

Ideal for

AutoAlign

Made

in Ge

rman

y

Ref.-No. 461 045

Ref.-No. 461 055

Batter board holderfor rotating laserPRIMUS2

Batter board holder for laser receiver COMMANDER2


Flexi Rods

Flexi Rods

Simply read off the direct readingscale.When levelling with a rotating laser,the Flexi Rod is the ideal accessoryfor determining differences in heightsquickly, exactly and correctly signed.

Features:

y Robust Flexi Rod made of anodisedaluminium tubes

y Abrasion-resistant graduation

y Bubble for vertical alignment ofthe Flexi Rod

y Robust clamping screw to securelylock the extension

y Also available as a set includingadapter and case

readinge.g. +34zero mark j

readinge.g. -48zero mark

zero mark

j

e

wq

Ref.-No. 360 811-622

Base plateRef.-No. 365 111

Ref.-No. 360 916-622

Easy determination of height differences

Ref.-No. 360 515-613

Ref.-No. 360 511

Ref.-No. 360 912

Ref.-No.365 112-613

Bubble included as a standard

Page 29

zero mark

Extra stur

dy! Clamp

ing

lever mad

e of metal

Set includ

e adapter

and bag

Clamping

lever

made of m

etal

Order information:

Ref.-No. Scope of delivery360 811-622 Flexi Rod with circular bubble, length 1.31 m - 2.42 m360 916-622 Flexi Rod set incl. universal adapter with quick clamp and bag

Adapters and accessories360 515-613 Universal adapter with quick clamp made of metal360 511 Plastic universal adapter360 912 Slide with target board for dot lasers365 112-613 Bag for all Flexi Rods365 111 Base plate for casting concrete

How to use the Flexi Rod:


Laser mEssf ix -S

Ref.-No. F 687 511

Laser mEssfix-S

Nedo Laser mEssfix-S is a robust teles-copic measuring stick for determiningdifferences in height with a rotatinglaser and a laser receiver. Perfect foruse in excavation jobs, levelling andcivil engineering projects.

Simply attach the laser receiver to theLaser mEssfix-S and position the detec-tor in the laser plane by means of teles-copic sections. The height of the laserplane can be read off from the analoguedisplay.

Quick, simple and precise.

The universal adapter allows to attachall kinds of laser receivers to the LasermEssfix-S. In order to avoid unintentio-nal changes in the extended length,the telescopes are equipped with aclamping screw to ensure a secure hold.The vertical position is maintainedthanks to the circular bubble.

Features:

y Robust telescopic measuring stickwith easy-to-read analogue display

y Universal adapter to accommodate alltypes of laser receivers

y Circular bubble to ensure an exactalignment

y Anodised telescopes, can be fixedwith clamping screws

y Easy to handle

y Reliable levelling system for allrotating lasers with receiver

Laser mEssfix-S:Min. Max.

Ref.-No. Features length lengthF 687 511 with universal adapter 1.37 m 5.17 mF 887 511 with universal adapter 1.70 m 6.83 m

zero mark

Page 30


Laser Accessories for Interior Finishing

Wall Mount ECO

Robust wall mount for line and dotlasers. Can be attached to the wall orto ceiling construction profiles.Adjustment wheel allows for easyheight adjustment. Perfect for suspen-ded ceilings.Adjustable range: 100 mm

Ref.-No. 461 032-613

Wall Mount-S

Robust wall mount for all rotatinglasers. Can be attached to the wallor to ceiling construction profiles.Fine adjustment allows heights to beeasily reset. Perfect for suspendedceilings.Adjustable range: 150 mmThe Wall Mount-S can be fixed hori-zontally to a 5/8 thread tripod.Ideal for exact alignment of thelaser in the structural facing sector.

Ref.-No. 461 020

Wall Mount easy

Robust wall mount for all rotatinglasers. Can be attached to the wallwith two screws.Adjustable range: 55 mm

Ref.-No. 461 030

Magnetic Target Board red orgreen

The target board is attached to theceiling profiles with magnets.For red and green lasers.

Ref.-No. 460 907-613 (red)

Ref.-No. 460 908-613 (green)

Ref.-No. 461 032-613

Ref.-No. 461 030

Ref.-No. 461 020

Ref.-No 460 907-613

Supplied w

ith bag

Page 31

Vertical Mount easy

For vertical use of the ECO600 HV green orECO600 HV with a tripod.

Ref.-No. 461 031

Easy laser alignment in structuralfacing jobs

Ref.-No 460 908-613

Ref.-No. 051 790

Ref.-No.061 607

Laser Glasses red or green

Improves the visibility of laser beams.For red and green lasers.

Ref.-No. 051 790 (red)

Ref.-No. 061 607 (green)

Laser Bail

Ideal when laying screed. The laser bailis fixed to the end of the crank column.The rotating laser can be operated nearthe floor and the height can be easilyadjusted using the crank mechanism.

Ref.-No. 660 131

Ref.-No. 660 131


Sales and Supply Conditions

1. The following Supply Conditions apply to all contracts, deliveries and other performances, including advisory services, unless they have been amended or excluded with our expressed consent.Any General Terms and Conditions of Business of the customer/purchaser are not binding even if we have not again expressively rejected them.

2. The prices applicable on the delivery date shall be determinant.

3. Deliveries valued at under 400 Euro net value of goods shall be shipped ex works. In the case of deliveries valued at over 400 Euro net value of goods, we will absorb the standard freight and postal charges.Deliveries abroad valued at 1,000 Euro or more net order value shall be shipped free German border.

4. Consignments are made exclusive of packing. The packing on pallets and in crates is madeavailable at prime cost.

5. Quotation and conclusion of contractAll our quotations are given without commitment. Contracts and other agreements shallbecome binding only by way of our written confirmation or delivery.If our sales staff or agents make oral agreements or provide assurances which go beyond the scope of our quotation, these shall always require our written confirmation in order to be valid. Unless otherwise agreed, documents forming part of the quotation, such as illu-strations, drawings, particulars of weights and dimensions, are only approximate.

6. Delivery conditions and defective performancesIf specific lead-times or delivery dates are not fulfilled, the customer whishing to withdrawfrom the contract or claim compensation or nonfulfillment shall not be released from the need to allow a suitable grace period for the performance and to issue a statement that he will refuse the performance after the expiry of the period.This shall not apply if we have expressively stated in writing that a lead-time or delivery date is binding.Reasonable partial consignments are permissible.Lead-times even those established after a delay shall be suitably extended in the event of force majeure and also unforeseen impediments occurring after the conclusion of the contract and for which we are not responsible, in so far as such impediments seriously affected delivery of the purchased item.We shall not be held responsible for delay in delivering and failure (impossibility) to deliver as long as the person we employ fulfill our obligations and our own suppliers attribute no fault to us.We shall not be held liable for delayed deliveries or failures (impossibility) to deliver for which our suppliers are to blame. The customers right to withdraw, after a grace period allowed to us has expired without result, remains unimpaired.

7. Shipment and transfer of riskUnless otherwise agreed, the route and mode of shipment are left at our discretion.At customers request the goods shall be insured. The risk shall be transferred to the custo-mer upon despatch.If shipment is delayed at the customers request or for a reason attributable to it, the goods shall be stored at the customers expense and risk. In such case, the notice that the goods are ready for despatch shall rank as despatch.

8. The goods are shipped ex-works at the recipients risk. Any complaints concerning trans-port damage must be made upon receipt.

9. Prices and paymentUnless otherwise agreed, payment shall be remitted within 30 days from invoice date so that the sum agreed as settlement of the invoice is at our disposal not later than the due date.Only if an according agreement exists, a discount able, properly taxed bill of change shall be accepted for mode of payment.Cheques and drafts are credited under the premise of being honored, costs being deducted,and payment shall be considered duly received on the day the amount is actually at our disposal.

10. In the event of late payment, interest on defaulted payment is charged at 4% above the Main refinancing operations Minimum bid rate of the ECB, without a special reminder beingrequired.

11. Retention of titleWe retain the title of the goods until full payment of the purchase price. In the case of goods sold by the customer as part of its business activities, we retain the title until all claims upon the customer deriving from the business relationship have been settled. This shall apply even if some or all of the claims have been entered in a current account and the balance has been drawn up and acknowledged. If substantial contractual obligations are infringed and especially in the event of delayed payment, we may take back the goods after issuing a reminder and the customer shall be obliged to deliver them up.Unless the German Hire Purchase Law applies, our taking-back or imposition of attachment shall imply withdrawal from the contract only if we have expressively stated this in writing.In the event of attachment or other impairments if rights by third parties, the customer shall inform us in writing, sending a record of attachment and an affirmed and signed statement identifying the attached items.The customer may resell the goods in the normal course of business and he assigns to us hereby the claim deriving from the resale together with all ancillary claims which he acquires upon his customer or third partys as a consequence of the resale. The customer is authorised to collect the debt, even after the assignment. Our right to collect the debt ourselves remains unimpaired thereby but we undertake not to collect the debts as long as the customer duly fulfills his payment obligations.

We may require the customer to inform us of the assigned claims and of the parties owing them, to provide all information required to collect them, to deliver up the pertinent docu-ments and advise the debtors of the assignment.We undertake to release the security held by us in as much as the value thereof exceeds the secured claims by more than 20 %, in so far as they may not yet have been settled.

12. Liability for Defects and Warranty ClaimsMinor defects shall neither constitute a right on the Customer's part to refuse acceptance nor justify any warranty claims.We accept liability for defects subject to the following conditions:

(1) The delivery items in question found to be defective within the warranty period, provided that such defects can be established to have existed at the time of passage of risk, shalleither be repaired or a substitute delivery shall be made free of charge respectively at ourdiscretion.

(2) All warranty claims shall become statute-barred after 12 months. This shall not apply where the German laws pursuant to 438 Para. 1 No. 2 (structures and objects for structu-res), 479 Para. 1 (right of recourse) and 634a Para. 1 No. 2 (building defects) of the German Civil Code (BGB) dictate longer periods of limitation, nor in the case of any loss of life, bodily injury or health impairment, in the case of any wilful or grossly negligent breach of duty on the part of the Supplier and in the event of fraudulent concealment of a defect. This shall not affect the statutory provisions concerning the suspension of expiration of prescription, suspension of the running or the rerunning of the statute of limitation.

(3) Following the timely service of a notice of defects, we shall be granted the opportunity for subsequent performance within a reasonable period of time. Should such subsequent per-formance prove to be a failure, the Customer may irrespective of his right to claim for damages pursuant to Para. 15) rescind the Contract or effect a price reduction.

(4) We shall not accept warranty claims in the case of merely minor deviations from any war-ranted quality, in the case of any insignificant reduction in serviceability, in the case of natural wear and tear or any damage caused after the passage of risk to the Customer by incorrect or negligent handling, excessive use, unsuitable operating fuels or materials, or due to defective building works, unsuitable building sites or caused by external influences which were not been taken into account in the Contract, nor damage due to non-reprodu-cible software faults. In the event that the Customer or any third party make any unautho-rised changes or carry out any unauthorised repairs, we shall not accept liability for anysuch changes or repairs nor forany consequential faults.

(5) The Customer shall only have a right of recourse against us pursuant to 478 of the German Civil Code (contractor's right of recourse) in so far as the Customer has made noagreements with his customers extending beyond the limits of the statutory warranty claims.

(6) In all other respects, Para. 15) hereunder shall apply to the Customer's right to claim for damages. All other claims by the Customer against us and our vicarious agents or claims other than those covered by this section shall be excluded.

13. We reserve the right to deviate from the illustrations in the catalogue in order to enhanceour products.

14. Impossibility, Adaptation of Contract(1) To the extent that a delivery is deemed impossible, the Customer shall have the right to

claim for damages, unless such impossibility is beyond our control. However, any claim fordamages by the Customer shall be limited to 10 % of the value of such part of the delivery item which could not be put into expedient operation as a result of the impossibility. This limitation shall not apply in case of any mandatory liability as in the case of wilful intent and gross negligence or in the case of any loss of life, bodily injury or health impairment. This is not associated with any changes to the burden of proof to the detriment of the Customer and shall not affect the Customer's right to rescission.

(2) In the event of any unforeseeable events, such as mobilisation, war, riot or any other simi-lar events, such as strike action and lock-out, should substantially change the economic value or the contents of the delivery item or should such events have a considerable impact on our business operations, the Contract shall be appropriately adapted, bearing in mind the requirements of good faith. If this is not practicable for economic reasons, we shall have the right to withdraw from the Contract.

15. Other Claims for Damages(1) All other claims for damages or compensation claims on the part of the Customer (herein-

after: claims for damages), irrespective of the legal grounds on which they may be based, in particular, claims based on any breach of duty arising out of the relationship under the law of obligations and any tortuous acts, shall be excluded.

(2) This shall not apply in the case of any mandatory liability, for example under the Product Liability Act, in the event of wilful intent or gross negligence, in the case of any loss of life, bodily injury or health impairment or in the case any breach of any essential contractual duties. Any claim for damages based on a breach of an essential contractual duty, however, shall be limited to foreseeable damage or losses as are typical for contracts such as the one between the Contracting Parties, except in the event of wilful intent or gross negligen-ce or in the case of mandatory liability following a loss of life, bodily injury or health impairment. This is not associated with any changes to the burden of proof to the detriment of the Customer.

(3) To the extent that the Customer is entitled to claim for damages pursuant to this section 15), all such claims shall become statute-barred upon expiration of the statute of limitation applicable to warranty claims pursuant to Para. 14) above.

(4) Damage claims under the Product Liability Act shall be subject to the statutory limitation rules.

16. Place of Performance, Jurisdiction, Applicable LawThe place of performance and exclusive place of jurisdiction for all deliveries and payments (incl. legal action based on dishonoured cheques or bills of exchange), as well as all dispu-tes arising between the Parties shall be Dornstetten, Germany, in so far as the Customer is a registered trader, a legal entity under public-law or a state-operated special fund.All contractual relations between the Contracting Parties shall be governed solely by the laws of the Federal Republic of Germany, excluding the Hague Convention relating to the Uniform Law on the International Sale of Goods.


Nedo GmbH & Co. KGHochgerichtstrasse 3943 D-72280 DornstettenGermanyPhone: +49/74 43/24 01-0 Fax: +49/74 43/24 01-45www.nedo.com [email protected]

Prin

ted

in G

erm

any

05/

2011

N

P 31

0 00

0-EN


Documents

catalog laser.pdf