CAST IRON Product Guide · All our components are interchangeable with the most popular ranges of hydraulic cast iron gear pumps, motors and flow dividers. We stock a complete range

Gear Pump Distributors Australia PTY LTD

CAST IRON

Product Guide

Contents Click on Heading to go to page

Introduction……………………………………………….3

Warranty and Disclaimer………………………………..4

Quick specification Chart – Bearing……………………5

Quick specification Chart – Bushing…………………...6

Exploded View – Bearing……………………………….7

Quick Reference Chart – Bearing……………………...8

Exploded View – Bushing………………………………11

Quick Reference Chart – Bushing……………………..12

Pumps

GP120…………………………………………….15

GP130…………………………………………….17

GP131…………………………………………….19

GP150…………………………………………….21

GP151…………………………………………….23

GP175…………………………………………….25

GP176…………………………………………….27

GP215…………………………………………….29

GP230…………………………………………….31

GP250…………………………………………….33

GP265…………………………………………….35

Pump Options…………………………………………….37

Motors

GM120 / 130……………………………………..38

GM131……………………………………………40

GM150……………………………………………42

GM151……………………………………………44

GM175……………………………………………46

GM176……………………………………………48

GM215……………………………………………50

GM215 Fan Motor……………………………….52

GM230……………………………………………54

GM250……………………………………………56

GM265……………………………………………58

Flow Dividers (GF)………………………………………65

Dimensions – Flow Dividers……………………………66

Dimensions – Bearing…………………………………..65

Dimensions – Bushing………………………………….67

Weights…………………………………………………..68

Port Identification / Specs……………………………...69

Flow Rates / Pipe Size………………………………….71

Displacement Calculation………………………………72

Useful Conversions / Formulae………………………..73

GEAR PUMP DISTRIBUTORS 2

Introduction

GEAR PUMP DISTRIBUTORS AUSTRALIA

GPD Australia (Gear Pump Distributors Australia Pty Ltd) was established in February, 2003 to

supply the Asia Pacific markets with Hydraulic Gear Pumps, Motors, Flow Dividers and Parts more

efficiently and cost effectively.

We have come to understand that the average hydraulic repair facility today repairs numerous brand

names and cannot always carry the necessary stock. By us maintaining an extensive inventory we

are able to supply parts overnight, and build and despatch complete units within 24 hours ex-works

Sydney.

All our components are interchangeable with the most popular ranges of hydraulic cast iron gear

pumps, motors and flow dividers. We stock a complete range of parts for both the bearing and

bushing range of hydraulic gear pumps, motors and flow dividers. We also stock a full range of

Group 2 aluminium pumps and motors, as well as a full range of Gerolor motors

At our facility in Sydney, Australia we are able to repair as well as build new Hydraulic Bearing

and Bushing pumps, motors and flow dividers. All units are tested in house on our purpose built

computerized test stand.

We are also able to offer service exchange units on most popular assemblies to allow for a quick

turn around on breakdowns.

We are also able to identify most other hydraulic cast iron and aluminium gear pumps, motors and

flow dividers from various other manufacturers, and are then able to offer replacements from our

own range.

If you feel we can be of assistance to you, please do not hesitate to contact us.


Warranty and Disclaimer

Gear Pump Distributors Australia Pty Limited, hereinafter referred to as “GPD” warrants all of its products to be free from defect in material and workmanship, for a period of six (6) months from date of delivery.

LIMITATIONS ON WARRANTY This warranty is expressly in lieu of any other warranties expressed or implied including any warranty of fitness for a particular purpose. The purchasers’ sole and exclusive remedy under this warranty shall be limited to the repair, replacement or exchange of warranted products at our option, F.O.B GPD facility. No special, incidental, consequential or other damage shall be recoverable. GPD shall not be liable for consequential damages or contingent liabilities including, but not limited to loss of life, personal injury, loss of crops, loss due to fire or water damage, loss of business income, down time cost and trade or other commercial loss arising out of failure of the product. GPD will in no event be liable for any sum in excess of the price received by it for the product for which liability is claimed or asserted.

Disclaimer

Data are average results based on a series of tests and are not necessarily representative of any single unit. GPD reserves the right to amend the technical data without notice. Most of the tests were conducted using ISO 68 Grade Oil at 40 degrees centigrade.


Quick Specification Chart

Bearing Series Specifications 120 / 130 / 131 / 150 / 151 / 175 / 176

Dash Size - 05 - 07 - 10 - 12 - 15 - 17 - 20 - 22 - 25 - 27 - 30

Gear Width 0.50"(1/2") 0.75"(3/4") 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3")

GP(M)120 Bearing

Gear Housing 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4")

cc/rev 16.00 24.10 32.20 40.30 48.30 56.40 64.50

L/min At 1000rpm 16.00 24.10 32.20 40.30 48.30 56.40 64.50

cu in (cu in/rev) 0.99 1.48 1.97 2.46 2.96 3.45 3.94

GPM At 1000rpm 4.23 6.37 8.51 10.65 12.76 14.90 17.04

Max Press ( Bar ) 205 205 205 205 205 170 170

Max Press ( Psi ) 3000 3000 3000 3000 3000 2500 2500

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400

GP(M)125 Bearing

Gear Housing 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3") 3.25"(31/4")

cc/rev 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

L/min At 1000rpm 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

cu in (cu in/rev) 1.28 1.91 2.55 3.19 3.82 4.46 5.10 5.74 6.38

GPM At 1000rpm 5.50 8.24 11.02 13.76 16.54 19.29 22.06 24.84 27.58

Max Press ( Bar ) 170 170 170 170 170 153 153 138 138

Max Press ( Psi ) 2500 2500 2500 2500 2500 2250 2250 2000 2000

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400

GP(M)130 GP(M)131 Bearing

Gear Housing 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3") 3.25"(31/4")

cc/rev 16.00 24.10 32.20 40.30 48.30 56.40 64.50 72.60 80.00

L/min At 1000rpm 16.00 24.10 32.20 40.30 48.30 56.40 64.50 72.60 80.00

cu in (cu in/rev) 0.99 1.48 1.97 2.46 2.96 3.45 3.94 4.43 4.92

GPM At 1000rpm 4.23 6.37 8.51 10.65 12.76 14.90 17.04 19.18 21.14

Max Press ( Bar ) 170/205 170/205 170/205 170/205 170/205 153/170 153/170 138/153 138/153

Max Press ( Psi ) 2500/3000 2500/3000 2500/3000 2500/3000 2500/3000 2250/2500 2250/2500 2000/2250 2000/2250

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400


Gear Housing 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3") 3.25"(31/4")

cc/rev 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

L/min At 1000rpm 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

cu in (cu in/rev) 1.28 1.91 2.55 3.19 3.82 4.46 5.10 5.74 6.38

GPM At 1000rpm 5.50 8.24 11.02 13.76 16.54 19.29 22.06 24.84 27.58

Max Press ( Bar ) 170/205 170/205 170/205 170/205 170/205 153/170 153/170 138/153 138/153

Max Press ( Psi ) 2500/3000 2500/3000 2500/3000 2500/3000 2500/3000 2250/2500 2250/2500 2000/2250 2000/2250

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400


Gear Housing 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3") 3.25"(31/4") 3.50"(31/2") 3.75"(33/4") 4.00"(4")

cc/rev 50.30 67.10 84.00 100.60 117.50 134.30 151.00 168.00 184.50 200.00

L/min At 1000rpm 50.30 67.10 84.00 100.60 117.50 134.30 151.00 168.00 184.50 200.00

cu in (cu in/rev) 3.07 4.09 5.13 6.14 7.17 8.20 9.21 10.25 11.28 12.30

GPM At 1000rpm 13.29 17.73 22.19 26.58 31.04 35.48 39.89 44.39 48.75 52.84

Max Press ( Bar ) 170/205 170/205 170/205 170/205 170/205 170/205 153/170 153/170 138/153 138/153

Max Press ( Psi ) 2500/3000 2500/3000 2500/3000 2500/3000 2500/3000 2500/3000 2250/2500 2250/2500 2000/2250 2000/2250

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400


Quick Specification Chart

Bushing Series Specifications 215 / 230 / 250 / 265

Dash Size - 05 - 07 - 10 - 12 - 15 - 17 - 20 - 22 - 25

Gear Width 0.50"(1/2") 0.75"(3/4") 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2")

GP(M)215 Bushing

Gear Housing Width 0.88"(7/8") 1.13"(11/8") 1.38"(13/8") 1.63"(15/8") 1.88"(17/8") 2.13"(21/8") 2.38"(23/8")

cc/rev 10.00 15.00 20.00 25.00 30.00 35.00 40.00

L/min At 1000rpm 10.00 15.00 20.00 25.00 30.00 35.00 40.00

cu in (cu in/rev) 0.61 0.92 1.22 1.53 1.84 2.15 2.44

GPM At 1000rpm 4.23 6.37 8.51 10.65 12.76 14.90 17.04

Max Press ( Bar ) 240 240 240 240 220 200 170

Max Press ( Psi ) 3500 3500 3500 3500 3200 2900 2500

Max Speed (RPM) 3000 3000 3000 3000 3000 3000 3000

GP(M)230 Bushing

Gear Housing Width 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2")

cc/rev 16.00 24.10 32.20 40.30 48.30 56.40 64.50

L/min At 1000rpm 16.00 24.10 32.20 40.30 48.30 56.40 64.50

cu in (cu in/rev) 0.99 1.48 1.97 2.46 2.96 3.45 3.94

GPM At 1000rpm 4.23 6.37 8.51 10.65 12.76 14.90 17.04

Max Press ( Bar ) 240 240 240 240 240 220 200

Max Press (Psi ) 3500 3500 3500 3500 3500 3250 3000

Max Speed (RPM) 3000 3000 3000 3000 3000 3000 3000

GP(M)250 Bushing

Gear Housing Width 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3")

cc/rev 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

L/min At 1000rpm 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40

cu in (cu in/rev) 1.28 1.91 2.55 3.19 3.82 4.46 5.10 5.74 6.38

GPM At 1000rpm 5.50 8.24 11.02 13.76 16.54 19.29 22.06 24.84 27.58

Max Press ( Bar ) 240 240 240 240 240 220 200 190 170

Max Press ( Psi ) 3500 3500 3500 3500 3500 3250 3000 2750 2500

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400

GP(M)265 Bushing

Gear Housing Width 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3")

cc/rev 44.00 59.00 73.50 88.00 102.00 118.00 132.60 147.00

L/min At 1000rpm 44.00 59.00 73.50 88.00 102.00 118.00 132.60 147.00

cu in (cu in/rev) 2.68 3.60 4.49 5.37 6.22 7.20 8.09 8.97

GPM At 1000rpm 11.62 15.59 19.42 23.25 26.95 31.18 35.03 38.84

Max Press ( Bar ) 240 240 240 240 240 240 220 200

Max Press ( Psi ) 3500 3500 3500 3500 3500 3500 3250 3000

Max Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400


Exploded View

Bearing Series 120 / 130 / 131 / 150 / 151 / 175 / 176


Quick Reference Chart

Bearing Series Quick Reference 120 / 130 / 131 / 150 / 151 / 175 / 176

PART TYPE SERIES

120 125 131 151 176

( 1 ) SHAFT END COVERS

4 BOLT ROUND 125-1311-10

6 BOLT ROUND 120-1411-10 125-1411-10 131-1411-10

2 BOLT 3.25" SAE A 120-1221-10 131-1221-10

2 BOLT 4" SAE B 120-1231-10 125-1231-10 131-1231-10 151-1231-10

2 BOLT 4" SAE B SHORT 120-1231-20

2 BOLT 5" SAE C 125-1241-10 151-1241-10 176-1241-10

4 BOLT 4" SAE B 120-1331-10 125-1331-10 131-1331-10 151-1331-10 176-1331-10

4 BOLT 5" SAE C 125-1341-10 131-1341-10 151-1341-10 176-1341-10

4 BOLT 6" SAE D 176-1351-10

2/4 BOLT 4" SAE B 151-1230-20

2/4 BOLT 4" SAE B SHORT 151-1530-20

PIGGYBACK 131-1610-20 131-1241-20

PAD MOUNT PUMP 125-1101-10 131-1101-10 151-1101-10

CHELSEA 120-1371-10

( 2 ) GEAR HOUSINGS

PUMP 120-21??-00 151-21??-00 131-21??-00 151-21??-00 176-21??-00

REFER TO DATA SHEET ABOVE THEN SELECT AND SUBSTITE ABOVE ?? WITH THE CORRECT DASH SIZE (CODE)

( 3 ) BEARING CARRIERS

STANDARD 120-3100-00 125-3100-00 131-3100-00 151-3100-00 176-3100-00

STANDARD WITH DRAIN 131-3100-10 151-3100-10 176-3100-10

( 4 ) PORT END COVERS

STANDARD 120-4100-00 151-4100-00 131-4100-00 151-4100-00 176-4100-00

PORTED 4 PORT 131-4200-00 151-4200-00

BI-ROTATION 151-4620-00

PIGGYBACK STD 131-4610-00 151-4630-00 176-4739-00

( 5 ) SOLID SHAFT GEAR SETS

7/8" KEY SAE B 131-51??-12 131-51??-12

1" KEY SAE BB 131-51??-13 131-51??-13 151-51??-13

1 1/4" KEY SAE C 151-51??-15 176-51??-15

13 SPLINE 7/8" SAE B 131-51??-32 131-51??-32 151-51??-32

14 SPLINE 1 1/4" SAE C 151-51??-45 176-51??-45

14 SPLINE 1 1/4" SHORT SAE C 151-52??-45


( 53 ) LOOSE GEAR SETS

STANDARD 131-53??-00 125-53??-00 131-53??-00 151-53??-00 176-53??-00



Quick Reference Chart (continued)


PART TYPE SERIES

120 125 131 151 176

( 6 ) CONTINENTAL SHAFTS

3/4" KEY 131-6100-11 131-6100-11

7/8" KEY 131-6100-12 125-6100-12 131-6100-12

7/8" KEY WITH EXT THREAD 131-6400-12 131-6400-12

1" KEY 131-6100-13 125-6100-13 131-6100-13 151-6100-13

1" KEY LONG 131-6300-12 131-6300-12

1 1/8" KEY 131-6100-14 131-6100-14 151-6100-14

1 1/4" KEY 131-6100-15 125-6100-15 131-6100-15 151-6100-15 176-6100-15

1 1/4" KEY LONG 125-6300-15 176-6300-15

1 3/4" KEY UCHIDA 176-6300-16

45mm KEY SHAFT 176-6400-17

6 SPLINE 1" 131-6400-03 125-6100-02 131-6400-03 151-6400-03

6 SPLINE 1 1/8" 125-6100-04 176-6100-04

9 SPLINE 5/8" 131-6100-20 131-6100-20

11 SPLINE 131-6100-81 131-6100-81

13 SPLINE 7/8" 131-6100-32 125-6100-32 131-6100-32 151-6100-32

13 SPLINE 7/8" SHORT 131-6200-32 131-6200-32

13 SPLINE 7/8" LONG 131-6300-32 131-6300-32

13 SPLINE 7/8" EXTRA LONG 131-6400-32 131-6400-32

13 SPLINE 1 3/4" 176-6400-36

14 SPLINE 1 1/4" 131-6100-45 125-6100-45 131-6100-45 151-6100-45 176-6100-45

14 SPLINE 1 1/4" LONG 151-6300-45

15 SPLINE 1" 131-6100-53 131-6100-53 151-6100-53

( 7 ) CONNECTING SHAFTS

STANDARD 131-7000-00 125-7000-00 131-7000-00 151-7000-00 176-7000-00

PIGGYBACK 131-7100-00 151-7100-30 176-7250-00

( 80 ) BEARINGS

NEEDLE ROLLER 131-8010-00 151-8010-00 131-8010-00 151-8010-00 176-8010-00

SHAFT BALL BEARING 131-8020-00 125-8010-00 131-8020-00 151-8020-00 176-8020-00

( 81 ) THRUST PLATES

PUMP 131-8120-00 151-8120-00 131-8120-00 151-8120-00 176-8120-00

( 82 ) FASTENERS

BOLTS 120-8216-?? XXX-8212-?? XXX-8212-?? XXX-8212-?? XXX-8212-??

STUDS 06"-11" 120-8226-01 XXX-8222-01 XXX-8222-01 XXX-8222-01 XXX-8222-01



STUDS 21"-26" XXX-8222-04 XXX-8222-04 XXX-8222-04 XXX-8222-04

THREADED ROD PER METER 120-8222-00 XXX-8222-00 XXX-8222-00 XXX-8222-00 XXX-8222-00

NUTS 120-8236-00 XXX-8230-00 XXX-8230-00 XXX-8230-00 XXX-8230-00

WASHERS 120-8244-00 XXX-8242-00 XXX-8242-00 XXX-8242-00 XXX-8242-00




PART TYPE SERIES

120 125 131 151 176

( 83 ) SNAP RINGS/CIRCLIPS

SHAFT XXX-8320-00 125-8320-00 XXX-8320-00 151-8320-00 176-8320-00

SHAFT END COVER XXX-8310-00 XXX-8310-00 151-8310-00 176-8310-00

( 84 ) SPACERS

SEAL SPACER 131-8410-00 125-8410-00 131-8410-00 151-8410-00

INTERNAL SPACER 125-843?-00

BEARING SPACER 131-8430-02 125-8430-00 131-8430-02 151-8430-01 176-8430-00

SHAFT SPACER (CONTI) 131-8420-00 125-8420-00 131-8420-00 176-8420-00

PIGGYBACK 131-8440-00 176-8410-03

( 85 ) RETAINERS

SEAL RETANER MOTOR 125-8510-00 176-8500-00

SEAL RETAINER PUMP 125-8500-00 176-8500-00

RETAINER NUT PUMP 125-8200-00

RETAINER NUT MOTOR 125-8210-00

( 86 ) DOWELS

STANDARD XXX-8600-00 XXX-8600-00 176-8600-00

( 871 ) SHAFT SEALS

PUMP SEAL STANDARD 131-8711-00 125-8711-00 131-8711-00 151-8711-00 176-8711-00

MOTOR SEAL STANDARD 131-8714-00 125-8714-00 131-8714-00 151-8713-00 176-8713-00

PUMP SEAL LOOSE SHAFT 131-8712-00 125-8712-00 131-8712-00

MOTOR SEAL LOOSE SHAFT 131-8713-00 131-8713-00

PUMP SEAL VITON 131-8711-10 125-8711-10 131-8711-10 151-8711-10 176-8711-10

( 872 ) BODY SEALS

BODY SEALS 120-8720-00 151-8720-00 131-8720-00 151-8720-00 176-8720-00

BODY SEALS VITON 131-8720-10 151-8720-10 131-8720-10 151-8720-10 176-8720-10

( 874 ) POCKET SEALS/O-RINGS

POCKET SEAL XXX-8743-90 XXX-8743-90 XXX-8743-90 XXX-8743-90 176-8743-80

RETAINER O-RING 125-8745-02 176-8745-02

RETAINER O-RING VITON 176-8745-10

PIGGYBACK O-RING

( 88 ) SMALL PARTS

PLUG DRAIN XXX-8811-00 XXX-8811-00 XXX-8811-00 XXX-8811-00 XXX-8811-00

PLUG SHAFT END COVER XXX-8810-00 XXX-8810-00 XXX-8810-00 XXX-8810-00 XXX-8810-00

CHECK VALVES XXX-8820-00 XXX-8820-00 XXX-8820-00 XXX-8820-00 XXX-8820-00

( 89 ) BRONZE PRESSURE RINGS

RING SEAL 131-8910-00 131-8910-00 151-8910-00 176-8910-00

SHAFT BUSH 125-8031-00

CONNECTING SHAFT BUSH 125-8040-00

( 892 ) KEYS

3/4" SHAFT

7/8" SHAFT XXX-8920-02 XXX-8920-04 XXX-8920-02 XXX-8920-02

1" SHAFT XXX-8920-01 XXX-8920-01 XXX-8920-01

1 1/8" SHAFT

1 1/4" SHAFT XXX-8920-03 XXX-8920-03 XXX-8920-03 XXX-8920-03

1 3/4" SHAFT


Exploded View

Bushing Series 215 / 230 / 250 / 265


Quick Reference Chart

Bushing Series Quick Reference 215 / 230 / 250 / 265

PART TYPE SERIES

215 230 250 265

( 1 ) SHAFT END COVERS

2 BOLT 3.25" SAE A 215-1221-20 230-1221-10

2 BOLT 3.25" SAE A WITH S/RETAINER

2 BOLT 3.25" SAE A MOTOR 215-1222-20

2 BOLT 4" SAE B 215-1231-20 230-1231-10 250-1231-10 265-1231-10

2 BOLT 4" SAE B MOTOR 215-1232-20 265-1232-10

2 BOLT 4" SAE B SHORT 230-1231-20

2 BOLT 5" SAE C 230-1241-10 250-1241-10 265-1241-10

2 BOLT 5" SAE C MOTOR 265-1242-10

4 BOLT 4" SAE B 230-1331-10 250-1331-10 265-1331-10

4 BOLT 4" SAE B MOTOR 265-1332-10

4 BOLT 5" SAE C 230-1341-10 250-1341-10 265-1341-10

4 BOLT 5" SAE C MOTOR 265-1342-10

4 BOLT GROUP 3 EURO 215-1381-20

2/4 BOLT 4" SAE B 250-1531-10

2/4 BOLT 4" SAE B SHORT

2/4 BOLT 5" SAE C 250-1541-10

PAD MOUNT FAN MOTOR 215-1102-20

( 2 ) HOUSINGS

PUMP 215-21??-00 230-21??-00 250-21??-00 265-21??-00

MOTOR 215-22??-00 230-22??-00 250-22??-00 265-22??-00

REFER TO DATA SHEET BELOW THEN SELECT AND SUBSTITE ABOVE ?? WITH CORRECT DASH SIZE (CODE)

( 3 ) BEARING CARRIERS

1 OUTLET 215-3100-00 230-3100-00 250-3100-00 265-3100-00

2 OUTLET 215-3200-00 230-3200-00 250-3200-00 265-3200-00

MOTOR 215-3400-00 230-3110-00 250-3400-00 265-3400-00

3" SUCTION 265-3300-00

( 4 ) PORT END COVERS

PORTED 215-4100-00 230-4200-00 250-4200-00 265-4200-00

PORTED 4 PORT 215-4200-00 230-4210-00

TANDEM 215-4300-00 230-4300-00 250-4300-00 265-4300-00

MOTOR 215-4400-00 230-4400-00 250-4400-00 265-4400-00

MOTOR TANDEM 265-4410-00

FAN MOTOR 215-4500-00

PIGGYBACK CW 230-4621-10 250-4622-10 265-4625-10

PIGGYBACK CCW 230-4621-20 250-4622-20 265-4625-20

ADD A PUMP 2 BOLT A CW 250-4737-10 265-4737-10

ADD A PUMP 2 BOLT A CCW 250-4737-20 265-4737-20

ADD A PUMP 2 BOLT B CW 250-4738-10 265-4738-10

ADD A PUMP 2 BOLT B CCW 250-4738-20 265-4738-20




PART TYPE SERIES

215 230 250 265

( 5 ) SOLID SHAFT GEAR SETS

7/8" KEY SAE B 230-51??-12

7/8" KEY SHORT SAE B 215-52??-12

1" KEY SAE BB 230-51??-13 250-51??-13

1 1/8" KEY (JCB) 230-51??-17

1 1/4" KEY SAE C 250-51??-15 265-51??-15

9 SPLINE 5/8" SHORT SAE A 215-52??-20

11 SPLINE 215-52??-81

13 SPLINE 7/8" SAE B 230-51??-32 250-51??-32

13 SPLINE 7/8" SHORT SAE B 215-52??-32 230-52??-32

14 SPLINE 1 1/4" SAE C 250-51??-45 265-51??-45

14 SPLINE (CLARK)

15 SPLINE 1" SAE BB 230-51??-53 250-51??-53

17 SPLINE 1 1/8" (CASE) 250-5113-84

TAPER 15/16" with 7/8" UNF thread 230-51??-77

TAPER 1:8 (GROUP 3) 215-52??-99


( 53 ) LOOSE GEAR SETS

STANDARD 215-53??-00 230-53??-00 250-53??-00 265-53??-00


( 6 ) CONTINENTAL SHAFTS

7/8" KEY 230-6100-12

1" KEY 215-6100-13 230-6100-13

1 1/8" KEY

1 1/4" KEY 230-6100-15 250-6100-15

1 1/4" KEY LONG 250-6300-15

6 SPLINE 1" 230-6400-03

6 SPLINE 1 1/4" 230-6100-05

13 SPLINE 7/8" 230-6100-32

14 SPLINE 1 1/4" 230-6100-45 250-6100-45

15 SPLINE 1" 250-6100-53

17 SPLINE KOMATSU 265-6400-87

( 7 ) CONNECTING SHAFTS

STANDARD 215-7000-00 230-7000-00 250-7000-00 265-7000-00

PIGGYBACK 230-7100-20 250-7100-40 265-7100-80

ADD A PUMP TO 9 SPLINE 250-7210-00 265-7210-00

ADD A PUMP TO 13 SPLINE 250-7220-00 265-7220-00

ADD A PUMP TO 15SPLINE 265-7240-00

( 80 ) BEARINGS/BUSHES

BUSHES 215-8000-00 230-8000-00 250-8000-00 265-8000-00

SHAFT BALL BEARING 215-8020-00 131-8020-00 151-8020-00 176-8020-00

ADD A PUMP 250-8021-00

( 81 ) THRUST PLATES

PUMP 215-8140-00 230-8140-00 250-8140-00 265-8140-00

MOTOR 215-8130-00 230-8130-00 250-8130-00 265-8130-00




( 82 ) FASTENERS

BOLTS 215-8211-?? XXX-8212-?? XXX-8212-?? XXX-8212-??

STUDS 06"-11" 215-8221-01 XXX-8222-01 XXX-8222-01 XXX-8222-01

STUDS 11"-16" 215-8221-02 XXX-8222-02 XXX-8222-02 XXX-8222-02

STUDS 16"-21" 215-8221-03 XXX-8222-03 XXX-8222-03 XXX-8222-03

STUDS 21"-26" 215-8221-04 XXX-8222-04 XXX-8222-04 XXX-8222-04

THREADED ROD PER METER XXX-8222-00 XXX-8222-00 XXX-8222-00

NUTS 215-8231-00 XXX-8230-00 XXX-8230-00 XXX-8230-00

WASHERS 215-8241-00 XXX-8242-00 XXX-8242-00 XXX-8242-00

WASHERS 265 MOTOR 265-8243-00

( 83 ) SNAP RINGS/CIRCLIPS

SHAFT XXX-8320-00 151-8320-00 176-8320-00

SHAFT END COVER 215-8310-00 XXX-8310-00 151-8310-00 176-8310-00

ADD A PUMP XXX-8340-00 XXX-8340-00

( 84 ) SPACERS

SEAL SPACER 215-8410-00 131-8410-00 151-8410-00 265-8510-00

BEARING SPACER 215-8410-10 131-8420-02 151-8430-01 176-8430-00

SHAFT SPACER (CONTI) 131-8420-00 176-8420-00

( 85 ) RETAINERS

SEAL RETAINER TELLTALE 230-8500-00 250-8500-00 265-8500-00

( 86 ) DOWELS

STANDARD 215-8600-00 XXX-8600-00 XXX-8600-00 265-8600-00

MOTOR 265-8610-00

( 871 ) SHAFT SEALS

PUMP SEAL STANDARD 215-8711-00 131-8711-00 151-8711-00 176-8711-00

MOTOR SEAL STANDARD 215-8713-00 131-8714-00 151-8713-00 176-8713-00

PUMP SEAL TELLTALE

PUMP SEAL LOOSE SHAFT 131-8712-00

MOTOR SEAL LOOSE SHAFT 131-8713-00

PUMP SEAL VITON 215-8711-10 131-8720-10 151-8720-10 176-8720-10

( 872 ) BODY SEALS

BODY SEALS 215-8720-00 131-8720-00 250-8720-00 265-8720-00

MOTOR BODY SEAL 215-8720-10

( 873 ) THRUST PLATE SEALS

PUMP CHANNEL SEAL 215-8731-20 230-8731-20 250-8731-20 265-8731-20

PUMP CHANNEL SEAL BACKUP 215-8731-30 230-8731-30 250-8731-30 265-8731-30

MOTOR SEAL BACKUP 215-8732-70 230-8732-70 250-8732-70 265-8732-70

MOTOR END SEAL 215-8732-60 230-8732-60 250-8732-60 265-8732-60

MOTOR SIDE SEAL 215-8732-40 230-8732-40 250-8732-40 265-8732-40

( 88 ) SMALL PARTS

PLUG DRAIN XXX-8811-00 XXX-8811-00 XXX-8811-00 XXX-8811-00

PLUG SHAFT END COVER XXX-8810-00 XXX-8810-00 XXX-8810-00 XXX-8810-00

CHECK VALVES XXX-8820-00 XXX-8820-00 XXX-8820-00 XXX-8820-00

( 89 ) KEYS

7/8" SHAFT XXX-8920-08

1" SHAFT XXX-8920-05 XXX-8920-05

1 1/8" SHAFT

1 1/4" SHAFT XXX-8920-06 XXX-8920-06

1:8 TAPER SHAFT (AEK)

1:5 TAPER SHAFT (ATK)


GP120 Series Gear Pump

The GP120 is a low to medium pressure pump utilising common working parts with the 130 series. Constructed from heavy duty cast iron and utilising heavy duty roller bearings, it has a smaller frame size than the 130 series. Various size displacements are available from 16cc to 64cc. Mounts include Chelsea cloverleaf, 2 Bolt A, 2 Bolt B, 4 Bolt B, 6 Bolt 2 5/8”.

CODE 05 07 10 12 15 17 20

Gear Width - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

Displacement - cc/rev (cu in/rev)

16 (0.99) 24.1 (1.48) 32.2 (1.97) 40.3 (2.46) 48.3 (2.96) 56.4 (3.45) 64.5 (3.94)

Maximum Pressure - BAR (PSI) 207 (3000) 207 (3000) 207 (3000) 207 (3000) 207 (3000) 172 (2500) 172 (2500)

Maximum Speed - RPM 2400 2400 2400 2400 2400 2400 2400

Options • Flanged or Threaded Ports

• Viton Seals

• Multiple Assembly

• Continental Shaft

• Shorten/Drill and Tap Shafts

Flow Rate 40

36

32

28

4

20

16

12

8

4

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

600 900 1200 1500 1800 2100 2400

To convert GPM to L/min x by 3.785 Speed (RPM)


Flo

w (G

PM

)


SPEED / GEAR WIDTH 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20)

600 4.2 (15.9) 5.4 (20.4) 6.5 (24.6) 7.6 (28.7) 9.0 (34.0)

900 6.0 (22.7) 7.5 (28.5) 10.0 (37.8) 11.5 (43.5) 13.5 (51.0)

1200 8.5 (32.0) 11.0 (41.5) 14.0 (53.0) 16.0 (60.5) 19.0 (71.9)

1500 11.0 (41.6) 14.0 (53.0) 17.5 (66.2) 20.5 (77.6) 24.0 (90.0)

1800 13.5 (51.1) 17.5 (66.2) 21.5 (81.5) 25.5 (96.5) 29.0 (109.77)

2100 16.0 (60.5) 21.0 (79.5) 25.5 (96.5) 29.5 (111.6) 34.5 (130.5)

2400 18.5 (70.0) 24.0 (90.0) 29.5 (111.6) 34.0 (128.0) 39.5 (149.0)

Note: Speed in RPM, Flow in US GPM (L/min) @ 2000 psi / 138 bar

Required Input Power

60

52.5

45

37.5

30

22.5

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

15

7.5

600 900 1200 1500 1800 2100 2400

To convert Hp to kW x by 0.745 Speed (RPM)

Note:

Horsepower calculated at

2000 psi (138 Bar) for all gear

widths

Power Limiting (PL) Factor

For each section of a pump, this is determined by the maximum pressure (psi) multiplied by the gear width (inches),

Multiple pumps, each section is added together.The total must not exceed the numbers in the corresponding table.


Input

Po

wer

(Hp)

SHAFT STYLE INTEGRAL

SHAFT AND

GEAR

CONTI

GEAR

SAE “A” Spline (5/8” 9 tooth) 2600 2600

SAE “B” Spline (7/8” 13 tooth) 7900 5850

SAE “B” Key (7/8” keyed) 4850 4850

SAE “BB” Spline (1” 15 tooth) - 5850

SAE “BB” Key (1” keyed) 7250 5850

SAE “C” Spline (1 1/4” 14 tooth) - 5850

Connecting Shaft - 5850


GP130 units are a medium pressure series of pumps. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 16cc to 64cc, with pressures up to 170 Bar. Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, 6 Bolt 2 5/8”, Pad .

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2


16 (0.99) 24.1 (1.48) 32.2 (1.97) 40.3 (2.46) 48.3 (2.96) 56.4 (3.45) 64.5 (3.94)



• Options

• Flanged or Threaded

Ports

• Viton Seals



• Transmission Seals with drain

• Stepped with 150/175 series

• Pad mount

• Rear ports

• Shorten / drill tap shaft

• Relief valve in rear cover

Flow Rate

40

36

32

28

24

20

16

12

8

4

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


SPEED / GEAR WIDTH 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20)

600 4.2 (15.9) 5.4 (20.4) 6.5 (24.6) 7.6 (28.7) 9.0 (34.0)

900 6.0 (22.7) 7.5 (28.5) 10.0 (37.8) 11.5 (43.5) 13.5 (51.0)

1200 8.5 (32.0) 11.0 (41.5) 14.0 (53.0) 16.0 (60.5) 19.0 (71.9)

1500 11.0 (41.6) 14.0 (53.0) 17.5 (66.2) 20.5 (77.6) 24.0 (90.0)

1800 13.5 (51.1) 17.5 (66.2) 21.5 (81.5) 25.5 (96.5) 29.0 (109.77)

2100 16.0 (60.5) 21.0 (79.5) 25.5 (96.5) 29.5 (111.6) 34.5 (130.5)

2400 18.5 (70.0) 24.0 (90.0) 29.5 (111.6) 34.0 (128.0) 39.5 (149.0)



60

52.5

45

37.5

30

22.5

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

15

7.5

600 900 1200 1500 1800 2100 2400


Note:



widths





Input

Po

wer

(Hp)


SHAFT AND

GEAR

CONTI

GEAR



SAE “B” Key (7/8” keyed) 4850 4850


SAE “BB” Key (1” keyed) 7250 5850



GP131 Series Gear Pumps

GP131 units are a medium to high pressure series of pumps. Built with a rugged cast iron design, utilising heavy duty roller bearings. The pumps are doweled to withstand high pressure shocks. Displacements range from 16cc to 64cc, with pressures up to 205 Bar. Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, 6 Bolt 2 5/8”, Pad .

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

Displacement - cc/rev (cu in/rev) 16 (0.99) 24.1 (1.48) 32.2 (1.97) 40.3 (2.46) 48.3 (2.96) 56.4 (3.45) 64.5 (3.94)



• Options


Ports

• Viton Seals





• Pad mount

• Shorten, drill / tap shaft

• Rear ports


Flow Rate

40

36

32

28

24

20

16

12

8

4

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


SPEED / GEAR WIDTH 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20)

600 4.2 (15.9) 5.4 (20.4) 6.5 (24.6) 7.6 (28.7) 9.0 (34.0)

900 6.0 (22.7) 7.5 (28.5) 10.0 (37.8) 11.5 (43.5) 13.5 (51.0)

1200 8.5 (32.0) 11.0 (41.5) 14.0 (53.0) 16.0 (60.5) 19.0 (71.9)

1500 11.0 (41.6) 14.0 (53.0) 17.5 (66.2) 20.5 (77.6) 24.0 (90.0)

1800 13.5 (51.1) 17.5 (66.2) 21.5 (81.5) 25.5 (96.5) 29.0 (109.77)

2100 16.0 (60.5) 21.0 (79.5) 25.5 (96.5) 29.5 (111.6) 34.5 (130.5)

2400 18.5 (70.0) 24.0 (90.0) 29.5 (111.6) 34.0 (128.0) 39.5 (149.0)



60

52.5

45

37.5

30

22.5

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

15

7.5

600 900 1200 1500 1800 2100 2400


Note:



widths





Input

Po

wer

(Hp)


SHAFT AND

GEAR

CONTI

GEAR



SAE “B” Key (7/8” keyed) 4850 4850


SAE “BB” Key (1” keyed) 7250 5850




GP150 units are a medium pressure series of pumps. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 21cc to 104cc, with pressures up to 170 Bar. Mounts include 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, Pad

CODE 05 07 10 12 15 17 20 22 25

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2

Displacement -

cc/rev (cu in/rev)

20.9

(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6

(5.1)

94.0

(5.74)

104.5

(6.38)

Maximum Pressure - BAR

(PSI)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

138

(2000)

138

(2000)

138

(2000)

138

(2000)

Maximum Speed - RPM 2400 2400 2400 2400 2400 2400 2400 2400 2400

• Options


Ports

• Viton Seals





• Pad mount

• Shorten drill / tap shaft

• Rear ports


60

Flow Rate 2 ½” (25)

54

2 ¼” (22)

48

2” (20)

42

1 ¾” (17)

36

1 ½” (15)

30

1 ¼” (12)

24 1” (10)

18

12

6

0

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GW 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20) 2 ¼” (-22) 2 ½” (-25)

600 5.5 (21.0) 7.0 (26.5) 8.5 (32.0) 10.0 (38.0) 11.0 (41.5) 12.6 (48.0) 14.0 (53.0)

900 8.5 (32.0) 11.0 (41.5) 13.0 (49.0) 16.0 (60.5) 17.5 (66.5) 19.0 (72.0) 21.0 (79.0)

1200 11.5 (43.5) 15.0 (57.0) 18.0 (68.0) 21.5 (81.5) 24.0 (91.0) 26.5 (100.0) 29.0 (110.0)

1500 15.0 (57.0) 19.0 (72.0) 23.0 (87.0) 27.0 (102.0) 30.5 (115.0) 33.5 (127.0) 37.5 (142.0)

1800 18.0 (68.0) 23.0 (87.0) 28.0 (106.0) 33.0 (125.0) 37.0 (140.0) 41.0 (155.0) 46.0 (174.0)

2100 21.0 (79.5) 27.0 (102.0) 32.5 (123.0) 38.5 (146.0) 43.5 (165.0) 48.0 (182.0) 54.0 (204.0)

2400 24.0 (91.0) 31.0 (117) 37.5 (142.0) 44.0 (167.0) 50.0 (189.0) 55.5 (210.0) 62.0 (235.0)

Note: Speed in RPM, Flow in GPM (L/min) @ 2000 psi / 138 bar


100

87.5

75

62.5

50

37.5

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

25

12.5

600 900 1200 1500 1800 2100 2400


Note:



widths





Input

Po

wer

(Hp)

SHAFT STYLE INTEGRAL SHAFT

AND GEAR

CONTI

GEAR



SAE “BB” Key (1” keyed) 5600 5600

SAE “C” Spline (1 1/4” 14 tooth) 12900 8500

SAE “C” Key (1 1/4” keyed) 12900 8500


GP151 Series Gear Pump GP151 units are a medium to high pressure series of pumps.

Built with a rugged cast iron design, utilising heavy duty roller bearings. The pumps are doweled to withstand high pressure shocks. Displacements range from 21cc to 104cc, with pressures up to 205 Bar. Mounts include 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, Pad

CODE 05 07 10 12 15 17 20 22 25

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2

Displacement - cc/rev (cu in/rev) 20.9

(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6

(5.1)

94.0

(5.74)

104.5

(6.38)

Maximum Pressure - BAR (PSI) 207

(3000)

207

(3000)

207

(3000)

207

(3000)

207

(3000)

207

(3000)

172

(2500)

172

(2500)

172

(2500)


• Options


Ports

• Viton Seals





• Pad mount

• Shorten drill / tap shaft

• Rear ports


60

Flow Rate 2 ½” (25)

54

2 ¼” (22)

48

2” (20)

42

1 ¾” (17)

36

1 ½” (15)

30

1 ¼” (12)

24 1” (10)

18

12

6

0

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GW 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20) 2 1/4” (-22) 2 ½” (-25)

600 5.5 (21.0) 7.0 (26.5) 8.5 (32.0) 10.0 (38.0) 11.0 (41.5) 12.0 (45.0) 13.0 (49.0)

900 8.5 (32.0) 11.0 (41.5) 13.0 (49.0) 16.0 (60.5) 17.5 (66.5) 19.0 (72.0) 21.0 (79.0)

1200 11.5 (43.5) 15.0 (57.0) 18.0 (68.0) 21.5 (81.5) 24.0 (91.0) 26.5 (100.0) 29.0 (110.0)

1500 15.0 (57.0) 19.0 (72.0) 23.0 (87.0) 27.0 (102.0) 30.5 (115.0) 33.5 (127.0) 37.5 (142.0)

1800 18.0 (68.0) 23.0 (87.0) 28.0 (106.0) 33.0 (125.0) 37.0 (140.0) 41.0 (155.0) 46.0 (174.0)

2100 21.0 (79.5) 27.0 (102.0) 32.5 (123.0) 38.5 (146.0) 43.5 (165.0) 48.0 (182.0) 54.0 (204.0)

2400 24.0 (91.0) 31.0 (117) 37.5 (142.0) 44.0 (167.0) 50.0 (189.0) 55.5 (210.0) 62.0 (235.0)



100

87.5

75

62.5

50

37.5

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

25

12.5

600 900 1200 1500 1800 2100 2400


Note:



widths

Power Limiting (PL) Factor For each section of a pump, this is determined by the maximum pressure (psi) multiplied by the gear width (inches),



Input

Po

wer

(Hp)


AND GEAR

CONTI

GEAR



SAE “BB” Key (1” keyed) 5600 5600


SAE “C” Key (1 1/4” keyed) 10900 8500



GP175 units are a medium pressure series of pump. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 51cc to 200cc, with pressures up to 170 Bar. Mounts include 4 Bolt B, 2 Bolt C, 4 Bolt C, 4 Bolt D

CODE 07 10 12 15 17 20 22 25 27 30

Gear Size - inches 3/4 10 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3


(3.08)

67.2

(4.1)

84

(5.13)

100.8

(6.15)

117.6

(7.18)

134.4

(8.2)

151.2

(9.23)

168

(10.25)

184.8

(11.28)

201.6

(12.3)


(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

151

(2200)

151

(2200)

138

(2000)

138

(2000)

Maximum Speed - RPM 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400

• Options

• Flanged or Threaded Ports

• Viton Seals




• Rear Ports



150

135

120

105

90

75

60

45

30

15

Flow Rate

3” (30)

2 ¾” (27)

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

600 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GW

1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20) 2 ¼” (-22) 2 ½” (-25) 2 ¾” (-27) 3” (-30)

600 8.5 (32.0) 11.0 (41.0) 13.0 (49.0) 16.0 (60.0) 18.0 (68.0) 20.0 (76.0) 23.0 (87.0) 25.0 (94.0) 28.0 (106.0)

1200 17.5 (66.0) 22.5 (85.0) 27.5 (104.0) 32.5 (123.0) 37.5 (142.0) 42.5 (161.0) 47.0 (178.0) 53.0 (201.0) 59.0 (223.0)

1500 22.5 (85.0) 28.5 (108.0) 34.5 (131.0) 41.0 (155.0) 47.5 (142.0) 53.0 (201.0) 59.0 (224.0) 66.0 (250.0) 73.0 (276.0)

1800 27.5 (104.0) 35.0 (132.0) 42.0 (159.0) 50.0 (189.0) 57.0 (216.0) 64.0 (242.0) 71.0 (269.0) 79.0 (299.0) 87.5 (331.0)

2100 32.5 (123.0) 41.0 (155.0) 49.0 (185.0) 59.0 (223.0) 67.0 (254.0) 74.5 (282.0) 82.5 (312.0) 92.0 (348.0) 101.5 (384.0)

2400 37.5 (142.0) 47.0 (178.0) 56.5 (214.0) 67.5 (255.0) 76.5 (290.0) 85.5 (324.0) 94.5 (357.0) 105.0 (397.0)

116.0 (439.0)



200

175

150

125

100

75

50

25

3

2 3/4

2 1/2

2 1/4

2

1 3/4

1 1/2

1 1/4

1

600 1200 1500 1800 2100 2400


Note:



widths





Input

Po

wer

(Hp)


AND GEAR

CONTI

GEAR

SAE “C” Single (1 1/4” 14 tooth) 8000 8000

SAE “C” Tandem (1 1/4” 14 tooth) 12500 -

SAE “C” Key (1 1/4” keyed) 7500 7500


GP176 Series Gear Pump GP176 units are a medium to high pressure series of pumps. Built with a rugged cast iron design, utilising heavy duty roller bearings. The pumps are doweled to withstand high pressure shocks. Displacements range from 50cc to 200cc, with pressures up to 205 Bar. Mounts include 4 Bolt B, 2 Bolt C, 4 Bolt C, 4 Bolt D

CODE 07 10 12 15 17 20 22 25 27 30

Gear Size - inches 3/4 10 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3


(3.08)

67.2

(4.1)

84

(5.13)

100.8

(6.15)

117.6

(7.18)

134.4

(8.2)

151.2

(9.23)

168

(10.25)

184.8

(11.28)

201.6

(12.3)


(3000)

207

(3000)

207

(3000)

207

(3000)

207

(3000)

170

(2500)

170

(2500)

155

(2250)

138

(2000)

138

(2000)



• Viton Seals




• Shorten drill/tap shaft

• Dry Valve thrust plates

• Transmission seals with drain

150

135

120

105

90

75

60

45

30

15

Flow Rate

3” (30)

2 ¾” (27)

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

0

600 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GW

1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20) 2 ¼” (-22) 2 ½” (-25) 2 ¾” (-27) 3” (-30)

600 6.5 (24.5) 9.2 (38.0) 12.5 (47.0) 14.5 (56.0) 17.5 (66.0) 20.0 (76.0) 23.5 (89.0) 25.0 (94.0) 28.0 (106.0)

1200 17.5 (66.0) 22.5 (85.0) 27.5 (104.0) 32.5 (123.0) 37.5 (142.0) 42.5 (161.0) 47.0 (178.0) 53.0 (201.0) 59.0 (223.0)

1500 22.5 (85.0) 28.5 (108.0) 34.5 (131.0) 41.0 (155.0) 47.5 (142.0) 53.0 (201.0) 59.0 (224.0) 66.0 (250.0) 73.0 (276.0)

1800 27.5 (104.0) 35.0 (132.0) 42.0 (159.0) 50.0 (189.0) 57.0 (216.0) 64.0 (242.0) 71.0 (269.0) 79.0 (299.0) 87.5 (331.0)

2100 32.5 (123.0) 41.0 (155.0) 49.0 (185.0) 59.0 (223.0) 67.0 (254.0) 74.5 (282.0) 82.5 (312.0) 92.0 (348.0) 101.5 (384.0)

2400 37.5 (142.0) 47.0 (178.0) 56.5 (214.0) 67.5 (255.0) 76.5 (290.0) 85.5 (324.0) 94.5 (357.0) 105.0 (397.0)

116.0 (439.0)



200

175

150

125

100

75

50

25

0

3

2 3/4

2 1/2

2 1/4

2

1 3/4

1 1/2

1 1/4

1

600 1200 1500 1800 2100 2400


Note:


2000 psi (138 BAR) for all

gear widths





Input

Po

wer

(Hp)


AND GEAR

CONTI

GEAR

SAE “C” Single (1 1/4” 14 tooth) 8000 8000

SAE “C” Tandem (1 1/4” 14 tooth) 12500 -

SAE “C” Key (1 1/4” keyed) 7500 7500


GP215 Series Gear Pump The GP215 is the smallest of a series of high pressure gear pumps. Utilising teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacement range from 10cc to 40cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt A, 2 Bolt B, Euro Grp3, 2 Bolt A / Pad combo

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

Displacement - cc/rev (cu in/rev) 10.2 (0.62) 15.2 (0.93) 20.3 (1.24) 25.4 (1.55) 30.5 (1.86) 35.6 (2.17) 40.6 (2.48)



Options • Double bearing SEC with 1“ keyed Shaft

• Multiple sections

• Rear ports available

• Flanged Ports (Code 61), UNF

(UNO), BSPP, NPT or any

combination

• Common inlet conditions for multiple pump assemblies

• Built in Relief Valve

30 Flow Rate

27

24

21

18

15

12

9

6

3

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

¾” (07)

½” (05)

0

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GEAR WIDTH ½” (-05) ¾” (-07) 1” (-10) 1 ¼” (-12) 1 ½” (-15) 1 ¾” (-17) 2” (-20)

900 2.3 (8.7) 3.5 (13.2) 4.6 (17.4) 5.8 (22.0) 7.0 (26.5) 8.1 (30.6) 9.3 (35.2)

1200 3.1 (11.7) 4.6 (17.4) 6.1 (23.0) 7.7 (29.0) 9.3 (35.2) 11.8 (44.6) 12.9 (48.8)

1500 3.9 (14.7) 5.9 (22.3) 7.8 (29.5) 9.7 (36.7) 11.6 (43.9) 13.5 (51.0) 15.6 (59.0)

1800 4.6 (17.4) 7.0 (26.5) 9.3 (35.2) 11.6 (44.0) 13.9 (52.6) 16.2 (61.3) 18.6 (70.4)

2100 5.5 (20.8) 8.2 (31.0) 10.8 (40.8) 13.5 (51.0) 16.2 (61.3) 18.9 (71.5) 21.8 (82.5)

2400 6.1 (23.0) 9.3 (35.2) 12.4 (46.9) 15.5 (58.6) 18.6 (70.4) 21.7 (82.1) 24.7 (93.4)

3000 7.8 (29.5) 11.6 (44.0) 15.6 (73.0) 19.3 (73.0) 23.2 (87.8) 27.1 (102.5) 31.1 (117.7)



60

52.5

45

37.5

30

22.5

15

7.5

0

1 3/4”

2”

1 1/2”

1 1/4”

1”

3/4”

1/2”

Horsepower data

calculated at maximum

pressure per gear width:

1/2” @ 3500 psi

3/4” @ 3500 psi

1” @ 3500 psi

1 1/4” @ 3500 psi

1 1/2” @ 3300 psi

1 3/4” @t 2900 psi

2” @ 2500 psi

900 1200 1500 1800 2100 2400 3000






Input

Po

wer

(Hp)


SHAFT AND

GEAR

CONTI

GEAR

SAE “A” Spline (5/8” 9 tooth) 4450 -

SAE “A” Key (5/8”) 4450 -

SAE 11T (3/4”) 5500 -

SAE “B” Spline (7/8” 13 tooth) 13200 -

SAE “B” Key (7/8” keyed) 9500 -

DIN 1:8 Taper ( Group 2 ) 9000 -



The GP230 is the next size series of high pressure gear pumps. Utilising Teflon coated steel bush journal bearings this provides excellent performance in high pressure applications. Displacements range from 16cc to 64cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 4 Bolt C

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

Displacement -cc/rev (cu in/rev)

16.1 (0.99) 24.1 (1.48) 32.2 (1.97) 40.3 (2.46) 48.3 (2.96) 56.4 (3.45) 64.5 (3.94)




• Viton Seals




• Rear Ports


• Stepdown options with GP215

• Common inlet for multiple sections/stepdown pumps

Flow Rate 40

36

32

28

24

20

16

12

8

4

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

¾” (07)

½” (05)

0 600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GEAR WIDTH ½” (-05) ¾” (-07) 1” (-10) 1 1/4” (-12) 1 1/2” (-15) 1 3/4” (-17) 2” (-20)

600 2.57 (7.5) 3.47 (13.0) 4.61 (17.4) 5.76 (21.8) 6.9 (26.0) 8.0 (30.5) 9.3 (35.0)

900 3.4 (12.8) 5.2 (19.5) 6.9 (26.0) 8.7 (33.0) 10.5 (40.0) 12.2 (46.0) 14.0 (53.0)

1200 5.0 (18.9) 6.9 (26.0) 9.4 (35.6) 11.8 (44.6) 14.4 (54.0) 16.5 (62.0) 19.0 (71.5)

1500 5.7 (21.5) 8.6 (32.7) 17.7 (44.5) 14.8 (56.5) 17.8 (67) 20.8 (79.0) 23.8 (90.0)

1800 7.00 (26.5) 10.6 (40.0) 14.0 (53.5) 17.8 (67.0) 21.6 (82.0) 25.0 (94.0) 28.5 (108)

2100 8.1 (30.6) 12.3 (47.0) 16.5 (62.5) 21.0 (80.0) 25.3 (95.0) 29.5 (111) 33.5 (127)

2400 9.2 (35.0) 14.3 (54.0) 19.0 (72.0) 24.0 (91.0) 29.0 (109.0) 33.7 (127) 38.5 (145)

3000 11.5 (44.0) 17.8 (67.5) 24.0 (91.0) 30.0 (114) 36.0 (136.0) 42.0 (159.0) 48.0 (182.0)

Note: Speed in RPM, Flow in GPM ( L/min ) @ 2000 psi / 138 bar


60

52.5

45

37.5

30

22.5

15

7.5

2”

1 ¾”

1 ½”

1 ¼”

1”

Note:


2000 psi (138 bar) for all gear

widths

0 600 900 1200 1500 1800 2100 2400






Input

Po

wer

(Hp)


SHAFT AND

GEAR

CONTI

GEAR


SAE “B” Key (7/8” keyed) 6250 6250

SAE “BB” Spline (1” 15 tooth) 13000 -

SAE “BB” Key (1” keyed) 9300 6250

SAE “C” Spline (1.25” 14 tooth) - 6250



The GP250 is the mid range series of high pressure gear pumps. Utilising Teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacements range from 20cc to 104cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt B, 4 Bolt B, 2/4 Bolt B combo, 4 Bolt C, 2/4 Bolt C combo

CODE 05 07 10 12 15 17 20 22 25

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2

Displacement -

cc/rev (cu in /rev)

20.9

(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6

(5.1)

94

(5.74)

104.5

(6.38)

Maximum Pressure - BAR (PSI)

240

(3500)

240

(3500)

240

(3500)

240

(3500)

240

(3500)

220

(3200)

207

(3000)

190

(2750)

173

(2500)

Maximum Speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400


• Viton Seals



• Rear Ports


• Stepped down with 215 series

• Through Drive options with 2 Bolt A or B, 9 or 13 tooth female inputs

• Common inlets for multiple sections and step downs

Flow Rate

70

63

56

49

42

35

28

21

14

7

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

¾” (07)

½” (05)

0

600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED

/ GW

½” (05) 3/4” (07) 1” (10) 1 1/4” (12)

1 1/2” (15) 1 3/4” (17) 2” (20) 2 1/4” (22)

2 1/2” (25)

600 2.65 (10.0) 4.2 (16.0) 5.8 (22.0) 7.4 (28.0) 9.2 (35.0) 10.8 (41.0) 12.4 (47.0) 13.7 (52.0) 15.3 (58.0)

900 3.97 (15.0) 6.3 (24.0) 8.8 (33.5) 11.3 (43.0) 13.7 (52.0) 16.0 (61.0) 18.5 (70.0) 20.8 (79.0) 23.2 (88.0)

1200 5.5 (21.0) 9.0 (34.0) 12.0 (46.0) 15.3 (58.0) 18.5 (70.0) 21.6 (82.0) 24.8 (94.0) 28.0 (106.0)

31.1 (118.0)

1500 7.0 (27.0) 11.2 (42.5)

15.2 (57.5) 19.2 (73.0) 23.0 (88.0) 27.4 (104) 31.0 (118.0)

34.8 (132.0)

39.1 (148.0)

1800 8.45 (32.0) 13.4 (51.0)

18.2 (69.0) 23.0 (87.5) 28.0 (106.0) 32.7 (124.0) 37.5 (142.0)

41.7 (158.0)

46.7 (177.0)

2100 9.9 (37.5) 15.4 (59.5)

21.2 (80.5) 27.0 (102.0)

32.5 (123.0) 38.0 (144.0) 43.6 (165.0)

48.8 (185.0)

54.0 (205.0)

2400 11.3 (43.0) 17.9 (68.0)

24.3 (92.0) 30.7 (116.5)

37.0 (140.0) 43.3 (164.0) 49.6 (188.0)

55.4 (210.0)

62.0 (235.0)



100

87.5

75

62.5

50

37.5

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

25

12.5

600 900 1200 1500 1800 2100 2400


Note:


2000 psi (138 Bar) for all

gear widths




GEAR PUMP DISTRBUTORS 34


AND GEAR

CONTI

GEAR



SAE “BB” Key (1” keyed) 7100 7100


SAE “C” Key (1 1/4” keyed) 13900 9000


Input

Po

wer

(Hp)


The GP265 is the largest series of high pressure gear pumps. Utilising Teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacements range from 44cc to 147cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt B, 2 Bolt C, 4 Bolt B, 4 Bolt C

CODE 07 10 12 15 17 20 22 25

Gear Size - inches 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2

Displacement - cc/rev (cu in/rev) 44.3 (2.7) 59 (3.6) 73.8 (4.5) 88.5 (5.4) 103.3 (6.3) 118 (7.2) 132.8 (8.1) 147.5 (9.0)

Maximum Pressure - BAR (PSI) 240 (3500) 240 (3500) 240 (3500) 240 (3500) 240 (3500) 240 (3500) 220 (3200) 207 (3000)

Maximum Speed - RPM 2400 2400 2400 2400 2400 2400 2400 2400


• Viton Seals




Flow Rate

90

81

72

63

54

45

36

27

• Stepdown with 230 series

• Through Drive options with 2 Bolt A or B, 9,13 and 15 tooth female inputs

• Common inlet for tandem or stepdown pumps

2 ½” (25)

2 ¼” (22)

2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

¾” (07)

18

9

0 600 900 1200 1500 1800 2100 2400



Flo

w (G

PM

)


Flow Rates

SPEED / GW

¾” (07) 1” (10) 1 1/4” (12) 1 1/2” (15) 1 3/4” (17) 2” (20) 2 1/4” (22) 2 1/2” (25)

600 5.9 (22.5) 7.5 (28.5) 10.0 (37.8) 12.5 (47.3) 14.7 (55.6) 16.5 (62.4) 19.0 (72.0) 21.0 (79.6)

900 8.6 (32.5) 11.4 (43.1) 15.4 (58.2) 18.9 (71.6) 22.0 (83.0) 25.2 (95.5)) 28.0 (106.0) 31.5 (119.4)

1200 11.4 (43.0) 16.6 (63.0) 21.0 (79.6) 25.0 (94.6) 30.0 (114.0) 34.0 (128.6) 38.7 (146.4) 42.5 (161.0)

1500 14.8 (56.0) 20.5 (77.6) 26.0 (98.4) 32.0 (121.0) 38.0 (144.0) 43.0 (162.7) 49.5 (187.4) 53.7 (203.5)

1800 18.5 (70.0) 25.5 (96.6) 31.5 (119.5) 39.0 (148.0) 45.6 (172.7) 51.6 (195.3) 59.4 (225.0) 64.5 (244.0)

2100 21.5 (81.3) 30.0 (113.9) 37.6 (142.0) 45.0 (170.0) 53.2 (201.0) 60.8 (230.4) 70.0 (265.0) 77.0 (291.0)

2400 25.0 (94.6) 34.6 (131.0) 43.0 (162.8) 52.0 (196.0) 61.5 (232.9) 70.3 (266.0) 80.0 (302.8) 88.0 (333.0)



150

112.5

75

37.5

0

2 ½”

2 ¼”

2”

1 ¾”

1 ½”

1 ¼”

1”

Note:


2000 psi (138 bar) for all gear

widths

600 1200 1500 1800 2100 2400






Input

Po

wer

(Hp)


AND GEAR

CONTI

GEAR


SAE “C” Key (1 1/4” keyed) 10800 10800


Pump Options

Bearing Series

Bushing Series

OPTION SERIES

1 - STEP DOWN /

PIGGYBACK

175/6-130/1

150/1-130/1

130/1-130/1

2 - BEARING CARRIER

All Needle Bearing Series

5 - ADD ON /

THROUGH DRIVE

265 - 2 Bolt A

265 - 2 Bolt B

250 - 2 Bolt A

250 - 2 Bolt B

4 - STEP DOWN 265 - 230

250 - 215

230 - 215

3 - BEARING CARRIER

All Bush Series


GM 120 / 130 Series Gear Motor

GM130 / 120 units are a medium pressure series of motors. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 16cc to 64cc, with pressures up to 170 Bar. Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, 6 Bolt 2 5/8”, Pad Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2








• Rear Ports

• Pad mount

• Relief in rear cover

Average Performance Data at 2000 psi (138 Bar)

40

35

30

25

20

15

10

5

2” (20)

1 3/4” (17)

1 1/2” (15)

1 1/4” (12)

1” (10)

0 0 400 800 1200 1600 2000



Pow

er

(Hp)

GM130 Series Gear Motor

1” (10) Gear 1 1/2” (12) Gear 2” (20) Gear

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 8.0 (30.0) 575 (65.0) 7.5 (5.6) 11.8 (44.5) 900 (102.0) 11.5 (8.6) 15.5 (58.0) 1180 (133.5) 15.0 (11.2)

1200 12.0 (45.0) 570 (64.5) 11.0 (8.2) 17.6 (67.0) 890 (101.0) 17.0 (12.7) 22.5 (85.0) 1170 (132) 22.5 (16.8)

1600 15.5 (59.0) 565 (64.0) 14.5 (10.8) 23.0 (87.0) 880 (99.5) 22.5 (16.8) 30.0 (113.0) 1160 (131) 29.0 (21.6)

2000 19.0 (74.0) 555 (63.0) 17.5 (13.1) 28.0 (106) 860 (97.0) 27.5 (20.5) 37.5 (142) 1130 (128) 36 (26.9)

Input Flow US GPM (L/min ) Output Torque in lbs ( Nm ) Output Power Hp ( kW )

1200

1050

900

750

600

450

Average Torque Output at 2000 psi (138 Bar)

2”

1 1/2”

1”

300

150

0

0 400 800 1200 1600 2000

Speed (RPM)





Torq

ue (

In lbs)


SHAFT AND

GEAR

TWO PIECE

STYLE

SAE “A” Spline (5/8 9 tooth) 2600 2600


SAE “B” Key (7/8” keyed) 4850 4850


SAE “BB” Key (1” keyed) 7250 5850




GM131 units are a medium to high pressure series of motors. Built with a rugged cast iron design, utilising heavy duty roller bearings. The motors are doweled to withstand high pressure shocks. Displacements range from 16cc to 64cc, with pressures up to 205 Bar. Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, 6 Bolt 2 5/8”, Pad Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2





• Viton Seals




• Rear Ports

• Pad mount

• Relief in rear cover

50

43.75

37.5

31.25

25

18.75

12.5

6.25


2” (20)

1 3/4” (17)

1 1/2” (15)

1 1/4” (12)

1” (10)

0 0 400 800 1200 1600 2000



Pow

er

(Hp)


1” Gear (10) 1 1/2” Gear (15) 2” Gear (20)

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 10.0 (38) 718 (81.0) 9.3 (7.0) 53 (14.0) 1125 (127.0) 14.3 (10.7) 18.0 (68) 1475 (166.0) 18.7 (14.0)

1200 14.0 (53) 712 (80.6) 13.7 (10.2) 72 (19.0) 1112 (126.0) 21.2 (15.8) 24.0 (91) 1462 (165.0) 28.0 (21.0)

1600 17.0 (64) 706 (80.0) 18.0 (13.5) 24.0 (91) 1100 (124.0) 28.0 (21.0) 32.0 (121) 1450 (163.0) 36.0 (27.0)

2000 20.5 (78) 693 (78.0) 21.8 (16.3) 29.5 (112) 1075 (121.0) 34.3 (25.6) 39.0 (148) 1412 (160.0) 45.0 (33.5)

Input Flow US GPM ( L/min ) Output Torque in lbs ( Nm ) Output Power in Hp ( kW )

1500

1312

1125

937

750

562

375

187

0


2”

1 1/2”

1”

0 400 800 1200 1600 2000

Speed (RPM)





Outp

ut T

orq

ue (

in lbs)


SHAFT AND

GEAR

TWO PIECE

STYLE



SAE “B” Key (7/8” keyed) 4850 4850


SAE “BB” Key (1” keyed) 7250 5850




GM150 units are a medium pressure series of motors. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 21cc to 104cc, with pressures up to 170 Bar. Mounts include 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, Pad Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20 22 25

Gear Size inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2

Displacement - cc/rev (cu in) 20.9

(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6

(5.1)

94

(5.74)

104.5

(6.38)

Maximum Pressure - BAR (PSI)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

138

(2000)

138

(2000)

138

(2000)

138

(2000)






• Rear Ports


70

61.2

52.5

43.7

35

26.2

17.5

8.7

0

2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1 1/4”

400 800 1200 1600 2000



Pow

er

(Hp)


1” Gears (10) 1 1/2” Gears (15) 2” Gears (20) 2 1/2” Gears (25)

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 11.0

(42)

730

(82.5)

9.0

(6.7)

16.0

(61)

1140

(129.0)

14.0

(10.4)

21.5

(81)

1530

(173.0)

18.5

(13.8)

26.5

(100)

1900

(214.5)

24.0

(17.9)

1200 16.0

(61)

720

(81.5)

13.5

(10.1)

23.0

(87)

1120

(126.5)

21.0

(15.7)

31.0

(117)

1495

(169.0)

28.0

(20.9)

37.5

((142)

1870

(211.5)

35.5

(26.5)

1600 20.5

(78)

710

(80.0)

17.5

(13.1)

30.5

(115)

1100

(124.5)

27.0

(20.1)

40.5

(153)

1470

(166.0)

37.0

(27.6)

50.0

(189)

1820

(205.5)

45.0

(33.6)

2000 25.5

(96.0)

670

(75.5)

21.0

(15.7)

38.0

(144)

1040

(117.5)

32.5

(24.2)

50.0

(189)

1410

(159.5)

33.2

(44.5)

62.0

(235)

1740

(196.5)

55.0

(41.0)

Input Flow US GPM ( L/min ) Output Torque in lbs ( Nm ) Output Power Hp ( kW )


2000

1050

1500

1250

1000

750

500

2 1/2”

2”

1 1/2”

1”

250

0 0 400 800 1200 1600 2000

Speed (RPM)





Torq

ue (

in lbs)


AND GEAR

TWO PIECE

STYLE



SAE “BB” Key (1” keyed) 5600 5600


SAE “C” Key (1 1/4” keyed) 12900 8500



GM151 units are a medium to high pressure series of motors.

Built with a rugged cast iron design, utilising heavy duty roller bearings. The motors are doweled to withstand high pressure shocks. Displacements range from 21cc to 104cc, with pressures up to 205 Bar. Mounts include 2 Bolt B, 4 Bolt B, 2 Bolt C, 4 Bolt C, Pad Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20 22 25

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2


20.9

(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6 (5.1) 94 (5.74) 104.5

(6.4)


(3000)

207

(3000)

207

(3000)

207

(3000)

207

(3000)

172

(2500)

172

(2500)

172

(2500)

172

(2500)


70

61.2

52.5

43.7

35

26.2

17.5

8.7

Options • Flanged Ports (Code 61)

• Viton Seals




• Rear Ports


2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1 1/4”

0 0 400 800 1200 1600 2000



Pow

er

(Hp)


1” Gears (10) 1 1/2” Gears (15 ) 2” Gears (20 ) 2 1/2” Gears ( 25 )

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 11.0

(42)

912

(103)

11.5

(8.3)

16.0

(61)

1425

(161)

17.5

(13.0)

21.5

(81)

1912

(216)

23.0

(17.2)

26.5

(100)

2375

(267)

30.0

22.0)

1200 16.0

(61)

900

(101)

16.8

(12.6)

23.0

(87)

1400

(158)

26.2

(19.6)

31.0

(117)

1868

(211)

35.0

(25.0)

37.5

(142)

2337

(263)

44.0

(33.0)

1600 20.5

(78)

887

(100)

21.8

(16.3)

30.5

(115)

1375

(155)

33.7

(25.0)

40.5

(153)

1837

(207)

46.0

(34.5)

50.0

(189)

2275

(256)

56.0

(42.0)

2000 25.5

(96.0)

837

(94)

26.2

19.5)

38.0

(144)

1300

(146)

40.6

(30.2)

50.0

(189)

1762

(198)

56.0

(42.0)

62.0

(235)

2175

(245)

68.0

(51.0)


3000


2625

2250

1875

1500

1125

2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1 1/4”

750

375

0 0 400 800 1200 1600 2000

Speed (RPM)



Multiple pumps, each section is added together. he total must not exceed the numbers in the corresponding table.


Torq

ue (

in lbs)


AND GEAR

TWO PIECE

STYLE



SAE “BB” Key (1” keyed) 5600 5600

SAE “C” Spline (1.25” 14 tooth) 12900 8500

SAE “C” Key (1.25” keyed) 10900 8500


GM175 Series Gear Motors

GM175 units are a medium pressure series of motor. Built with a rugged cast iron design, utilising heavy duty roller bearings. Displacements range from 51cc to 200cc, with pressures up to 170 Bar. Mounts include 4 Bolt B, 2 Bolt C, 4 Bolt C, 4 Bolt D Refer to pg 73 for calculations / formulae

CODE 07 10 12 15 17 20 22 25 27 30

Gear Size - inches 3/4 10 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3


(3.08)

67.2

(4.1)

84

(5.13)

100.8

(6.15)

117.6

(7.18)

134.4

(8.2)

151.2

(9.23)

168

(10.25)

184.8

(11.28)

201.6

(12.3)


(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

172

(2500)

151

(2200)

151

(2200)

138

(2000)

138

(2000)


Options





150

131.25

112.5

93.75

75

56.25

37.5

18.75


3”

2 3/4”

2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

0

0 400 800 1200 1600 2000



Pow

er (H

P)

GM175 Series Gear Motors

11/2” Gears (15) 2” Gears (20) 2 1/2” Gears (25) 3” Gears (30)

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 25.0

(94.6)

1700

(192.0)

22.0

(16.4)

32.0

(121)

2280

(256.5)

27.0

(20.1)

42.0

(159)

2886

(326)

36.0

(26.8)

49.5

(187)

3466

(391.6)

44.0

(32.8)

1200 36.0

(136.2)

1630

(184.0)

31.0

(23.3)

48.0

(181.6)

2270

(255)

42.5

(31.7)

60

(227)

2882

(325.6)

54.5

(40.7)

72.5

(274)

3466

(391.6)

66

(49.2)

1600 48.0

(181.6)

1615

(182.0)

41

(30.6)

64.0

(242)

2265

(256)

57.0

(42.5)

78

(295)

2875

(324.8)

73.0

(54.4)

94

(356)

3570

(403.5)

89.5

(66.8)

2000 59.5

(225)

1600

(181)

53

(39.5)

78.5

(297)

2260

(255)

62.0

(46.2)

96.5

(365)

2773

(312)

88.0

(65.6)

115

(435)

3430

(387.5)

109

(81.3)


Average Torque Output at 2000psi (138 Bar)

4000

3500

3000

2500

2000

1500

3 “

2 3/4”

2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1000

500

0

0 400 800 1200 1600 2000

Speed (RPM)





Torq

ue (

in lbs)


AND GEAR

TWO PIECE

STYLE

SAE “C” Single 8000 8000

SAE “C” Tandem 12500 -

SAE “C” Key 7500 7500



GM176 units are a medium to high pressure series of motors. Built with a rugged cast iron design, utilising heavy duty roller bearings. The motors are doweled to withstand high pressure shocks. Displacements range from 50cc to 200cc, with pressures up to 205 Bar. Mounts include 4 Bolt B, 2 Bolt C, 4 Bolt C, 4 Bolt D Refer to pg 73 for calculations / formulae

CODE 07 10 12 15 17 20 22 25 27 30

Gear Size – inches 3/4 10 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3


50.4

(3.08)

67.2

(4.1)

84

(5.13)

100.8

(6.15)

117.6

(7.18)

134.4

(8.2)

151.2

(9.23)

168

(10.25)

184.8

(11.28)

201.6

(12.3)


(3000)

207

(3000)

207

(3000)

207

(3000)

207

(3000)

172

(2500)

172

(2500)

172

(2500)

138

(2000)

138

(2000)


Options • Flanged or Threaded PortsMultiple Assembly



150

131.25

112.5

93.75

75

56.25

37.5

18.75


3”

2 3/4”

2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

0 0 400 800 1200 1600 2000


Please note: 2 3/4” and 3” are shown at 2500 psi, these figures are not advisable.


Pow

er (H

P)


11/2” Gears 2” Gears 2 1/2” Gears 3” Gears

SPEED INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

INPUT

FLOW

OUTPUT

TORQUE

OUTPUT

POWER

800 25.0

(94.6)

2000

(225)

25.4

(18.9)

32.0

(121)

2750

(310)

34.9

(26)

42.0

(159)

3750

(423)

47.6

(35.5)

49.5

(187)

4450

(502)

56.5

(42.1)

1200 36.0

(136.2)

2000

(225)

38.1

(28.4)

48.0

(181.6)

2750

(310)

52.4

(39.1)

60

(227)

3560

(402)

67.8

(50.6)

72.5

(274)

4400

(497)

83.8

(62.5)

1600 48.0

(181.6)

1950

(220)

49.5

(36.9)

64.0

(242)

2710

(306)

68.8

(51.3)

78

(295)

3500

(395)

88.9

(66.3)

94

(356)

4355

(492)

110.6

(82.5)

2000 59.5

(225)

1900

(214)

60.3

(44.9)

78.5

(297)

2700

(305)

85.7

(63.9)

96.5

(365)

3450

(389)

109.5

(81.7)

115

(435)

4184

(472)

132.8

(99)


5000


4375

3750

3125

2500

1875

3 “

2 1/2”

2”

1 1/2”

1250

625

0 0 800 1200 1600 2000

Speed (RPM)





Torq

ue (

in lbs)


AND GEAR

TWO PIECE

STYLE

SAE “C” Single (1.25” 14 tooth) 8000 8000

SAE “C” Tandem (1.25” 14 tooth) 12500 -

SAE “C” Key (1.25” Keyed) 7500 7500



The GM215 is the smallest of a series of high pressure gear motors. Utilising teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacements range from 10cc to 40cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt A, 2 Bolt B, Euro Grp3, 2 Bolt A / Pad combo Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20

Gear Size – inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2




Options • Double bearing SEC with 1“ keyed shaft

• Multiple sections

• Rear ports available


• Built in Over Run Check

Average Performance at 3000 psi (207 Bar) 50

45

40 2” (20)

35 1 ¾” (17)

30 1 ½” (15)

25 1 ¼” (12)

20 1” (10)

15 ¾” (07)

10 ½” (05)

5

0

600 900 1200 1500 1800 2100 2400



Pow

er (H

P)


1” Gears (10) 1 1/4” Gears (12) 1 1/2” Gears (15) 1 3/4” Gears (17) 2” Gears (20)

SPEED INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

900 6.0

(22.7)

570

(64)

7.0

(26.5)

711

(80)

8.2

(31.0)

850

(96)

9.6

(36.3)

830

(93)

11.0

(41.6)

940

(106)

1200 7.5

(28.3)

570

(64)

9.2

(35.0)

711

(80)

11.0

(41.6)

850

(96)

13.0

(49.0)

830

(93)

14.6

(55.0)

940

(106)

1500 9.2

(35.0)

570

(64)

11.5

(43.5)

710

(80)

9.7

(51.6)

850

(96)

16.0

(60.5)

830

(93)

18.0

(68.0)

930

(105)

1800 11.3

(42.7)

565

(63)

14.0

(53.0)

705

(79)

16.0

(60.5)

840

(94)

19.0

(72.0)

820

(92)

21.5

(81.0)

930

(105)

2100 12.8

(48.6)

565

(63)

16.0

(60.5)

705

(79)

19.0

(72.0)

840

(94)

22.0

(83.6)

820

(92)

25.0

(94.6)

920

(104)

2400 14.5

(55.0)

560

(62)

18.2

(69.0)

690

(78)

21.6

(82.0)

830

(93)

25.5

(96.5)

810

(91)

28.0

(106.0)

920

(104)

3000 18.0

(68.5)

560

(62)

22.5

(85.0)

690

(78)

27.0

(102.0)

830

(93)

31.5

(119.5)

810

(91)

36.0

(136.0)

910

(102)

Speed Input Flow US GPM ( L/min )) Torque in In Lbs ( Nm ). Data calculated at 3000 psi. 2500 psi for 1.75” and 2”,

1000

875

750

625

500

375

250


2”

1 ½” 1 ¾”

1 ¼”

1”

¾”

½”

Note:

Torque calculated at

3000PSI

(2500 psi for 1 3/4” and 2”)

125

0 0 900 1200 1500 1800 2100 2400 3000

Speed (RPM)

Input Power Limiting Factor




Input

Po

wer

(Hp)


SHAFT AND

GEAR

TWO PIECE

STYLE

SAE “A” Spline (5/8” 9 tooth) 4450 -

SAE “B” Spline (7/8” 13 tooth) 13000 -

SAE “B” Key (7/8” keyed) 9000 -


GM215 Fan Motor

The GM215 Fan Motor is a specially designed motor with a built in overhung load adapter.

Features of the motor are:

• A Combination 2 Bolt A / Bottom Pad mounting flange

• 1” Key shaft ( long ), drilled and tapped 5/16” UNF • Optional built in over run / anti- cavitation

check valve in the rear cover • Double (2) shaft bearings ( 150 series ) make it

suitable for being either belt driven, or having the fan blade direct mounted in a fan drive application

Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20

Gear Size (inches) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2

Displacement (cc/rev) (cu in/rev) 10.2 (0.62) 15.2 (0.93) 20.3 (1.24) 25.4 (1.55) 30.5 (1.86) 35.6 (2.17) 40.6 (2.48)

Maximum Pressure (BAR) (PSI) 240 (3500) 240 (3500) 240 (3500) 240 (3500) 220 (3200) 207 (3000) 172 (2500)

Maximum Speed (RPM) 3000 3000 3000 3000 3000 3000 3000

Average Performance at 3000 psi (207 Bar) 50

40

30

20

10 0

600 900 1200 1500 1800 2100 2400



2” (20)

1 ¾” (17)

1 ½” (15)

1 ¼” (12)

1” (10)

¾” (07)

½“ (05)

Pow

er (H

P)

GM215 Fan Motor

1” (10) Gears 1 1/4” (12)Gears 1 1/2” (15) Gears 1 3/4” (17) Gears 2” (20) Gears

SPEED INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

900 3.2

(12.2)

570

(64)

4.0

(15.2)

711

(80)

4.8

(18.3)

850

(96)

5.6

(21.3)

830

(93)

6.4

(24.4)

940

(106)

1200 4.8

(18.3)

570

(64)

6.0

(22,8)

711

(80)

7.3

(27.4)

850

(96)

8.5

(31.9)

830

(93)

9.7

(36.6)

940

(106)

1500 6.4

(24.4)

570

(64)

8.1

(30.5)

710

(80)

9.7

(36.6)

850

(96)

11.3

(42.7)

830

(93)

12.9

(48.8)

930

(105)

1800 8.1

(30.5)

565

(63)

10.1

(38.1)

705

(79)

12.1

(45.7)

840

(94)

14.1

(53.3)

820

(92)

16.1

(60.9)

930

(105)

2100 9.7

(36.6)

565

(63)

12.1

(45.7)

705

(79)

14.5

(54.9)

840

(94)

16.9

(64.0)

820

(92)

19.3

(73.1)

920

(104)

2400 11.3

(42.7)

560

(62)

14.1

(53.3)

690

(78)

16.9

(64.0)

830

(93)

19.7

(74.7)

810

(91)

22.6

(85.4)

920

(104)

3400 12.9

(48.8)

560

(62)

16.1

(60.9)

690

(78)

19.3

(73.1)

830

(93)

22.6

(85.4)

810

(91)

25.8

(97.5)

910

(102)

Speed Input Flow US GPM ( L/min ) Torque in In Lbs (Nm). All data at 3000 psi.

1000

875

750

625

500

375

250

125


2”

1 ½” 1 ¾”

1 ¼”

1”

¾”

½”

Note:


3000PSI

(2500 psi for 1 3/4” and 2”)

Input

Po

wer

(Hp)


The GM230 is the next size series of high pressure gear motors. Utilising Teflon coated steel bush journal bearings this provides excellent performance in high pressure applications. Displacements range from 16cc to 64cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt A, 2 Bolt B, 4 Bolt B, 4 Bolt C Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2








• Rear Ports

Average Performance at 3000 psi (207 Bar)

70

2” (20)

63

56 1 ¾” (17)

49 1 ½” (15)

42

1 ¼” (12)

35 1” (10)

28

21

14

7

0 900 1200 1500 1800 2100 2400



Pow

er (H

P)


1” Gears (10) 1 1/4” Gears (12) 1 1/2” Gears (15) 1 3/4” Gears (17) 2” Gears (20)

SPEED INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

900 9.5

(35)

865

(97)

11.3

(43)

1080

(122)

13.7

(52)

1310

(148)

15.8

(60)

1530

(172)

17.7

(67)

1765

(199)

1200 11.8

(45)

860

(97)

14.7

(56)

1080

(122)

17.7

(67)

1310

(148)

20.6

(78)

1530

(172)

22.7

(86)

1760

(199)

1500 14.5

(55)

855

(96)

18.2

(69)

1070

(120)

21.6

(82)

1300

(146)

24.8

(94)

1520

(171)

28.5

(108)

1755

(198)

1800 17.1

(65)

850

(96)

21.6

(82)

1060

(119)

25.8

(98)

1300

(146)

29.3

(111)

1510

(170)

33.5

(127)

1735

(196)

2100 20.3

(77)

850

(96)

25

(95)

1055

(119)

29.8

(113)

1295

(146)

34.3

(130)

1505

(170)

38.8

(147)

1700

(192)

2400 23.2

(88)

845

(95)

28.4

(107)

1050

(118)

33.2

(126)

1290

(145)

38.8

(147)

1495

(169)

44.1

(167)

1695

(191)

3000 28.8

(109)

830

(93)

35.1

(107)

1040

(117)

42.2

(159)

1280

(144)

49.2

(186)

1485

(167)

56.3

(213)

1685

(190)

Speed Input Flow US GPM ( L/min ) Torque in In Lbs ( Nm ). All data at 3000 psi.


2000

1750

1500

1250

1000

750

500

2”

1 /4”

1 1/2”

1 1/4”

1”

250

0 0 900 1200 1500 1800 2100 2400

Speed (RPM)





Outp

ut T

orq

ue (

in lbs)


SHAFT AND

GEAR

TWO PIECE

STYLE


SAE “B” Key (7/8” keyed) 6250 6250


SAE “BB” Key (1” keyed) 9300 6250

SAE “C” Spline (1.25” 14 tooth) - 6250



The GP250 is the mid range series of high pressure gear motors. Utilising Teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacements range from 20cc to 104cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt B, 4 Bolt B, 2/4 Bolt B combo, 4 Bolt C, 2/4 Bolt C combo Refer to pg 73 for calculations / formulae

CODE 05 07 10 12 15 17 20 22 25

Gear Size - inches 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2


(1.28)

31.3

(1.91)

41.8

(2.55)

52.2

(3.19)

62.7

(3.83)

73.1

(4.46)

83.6

(5.1)

94

(5.74)

104.5

(6.38)


(3500)

240

(3500)

240

(3500)

240

(3500)

240

(3500)

220

(3200)

207

(3000)

190

(2750)

172

(2500)


90

78.75

67.5

56.25

45

33.75

22.5

11.25




• Rear Ports


2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1 1/4”

1”

0 0 900 1200 1500 1800 2100 2400


Note: 2 1/4” and 2 1/2” at 2500 psi (172 Bar)


Pow

er

(Hp)


11/4” Gears 1 1/2” Gears 2” Gears 2 1/2” Gears

SPEED INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

900 14.5

(55)

1400

(160)

17.1

(65)

1672

(188)

22.9

(87)

2320

(262)

29

(110)

2380

(268)

1200 19.2

(73)

1380

(156)

22.9

(87)

1672

(189)

30.6

(116)

2300

(259)

37.5

(142)

2370

(267)

1500 23.7

(90)

1360

(154)

28.2

(107)

1663

(188)

37.7

(143)

2270

(256)

45.9

(174)

2350

(265)

1800 28

(106)

1350

(153)

33.2

(126)

1637

(185)

44.3

(168)

2250

(254)

54

(205)

2340

(264)

2100 32.2

(122)

1330

(150)

38.5

(146)

1619

(183)

51.5

(195)

2240

(253)

62.8

(238)

2320

(262)

2400 36.9

(140)

1320

(149)

44.1

(167)

1610

(182)

58

(220)

2240

(253)

70.8

(268)

2300

(259)

Speed Input Flow US GPM ( L/min ) Torque in In Lbs ( Nm ). All data at 3000 psi except 2 ¼” and 2 ½” at 2500 psi

Average Torque Output

3000

2625

2250

1875

1500

1125

2 ½”

2” 1 ¾”

1 ½”

1 ¼”

750

375

0

0 900 1200 1500 1800 2100 2400

Speed (RPM)

Note:

Torque calculated at 3000

psi, except 2 1/4” and

2 1/2” gears (2500 psi)





Outp

ut T

orq

ue (

in lbs)


AND GEAR

TWO PIECE

STYLE


SAE “BB” Spline (1” 15 tooth) 9900 9000

SAE “BB” Key (1” keyed) 7000 7000


SAE “C” Key (1.25” keyed) 13900 9000



The GM265 is the largest series of high pressure gear motors. Utilising Teflon coated steel bush journal bearings, this provides excellent performance in high pressure applications. Displacements range from 44cc to 147cc, with a pressure rating of up to 240 Bar (dependent on gear size). Mounts include 2 Bolt B, 2 Bolt C, 4 Bolt B, 4 Bolt C Refer to pg 73 for calculations / formulae

CODE 07 10 12 15 17 20 22 25

Gear Size - inches 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2


44.3 (2.7) 59 (3.6) 73.8 (4.5) 88.5 (5.4) 103.3 (6.3) 118 (7.2) 132.8 (8.1) 147.5 (9.0)

Maximum Pressure - BAR (PSI) 240 (3500) 240 (3500) 240 (3500) 240 (3500) 220 (3200) 207 (3000) 190 (2750) 172 (2500)

Maximum Speed - RPM 2400 2400 2400 2400 2400 2400 2400 2400




200

175

150

125

100

75

50

25


2 1/2”

2 1/4”

2”

1 3/4”

1 1/2”

1 1/4”

1”

0 0 900 1200 1500 1800 2100 2400


Note: 2 1/2” Gears at 2500 psi (172 Bar)


Pow

er

(Hp)

Outp

ut T

orq

ue (

in lbs)


11/2” Gears (15) 1 3/4” Gears (17) 2” Gears (20) 2 1/2” Gears (25)

SPEED INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

INPUT

FLOW

OUTPUT

TORQUE

900 25.8

(98)

2445

(276)

29.5

(112)

2950

(333)

33

(125)

3800

(429)

40

(151)

4120

(460)

1200 33

(125)

2425

(274)

37.5

(142)

2930

(331)

42.5

(161)

3700

(418)

52

(197)

3980

(450)

1500 40

(151)

2380

(269)

46

(174)

2890

(326)

52

(197)

3640

(411)

63.5

(240)

3890

(440)

1800 47

(178)

2370

(267)

53.8

(204)

2860

(323)

61

(231)

3580

(404)

75

(284)

3760

(425)

2100 54

(204)

2300

(260)

62.6

(237)

2830

(319)

70

(267)

3530

(398)

87

(329)

3717

(420)

2400 61

(231)

2250

(254)

70.5

(267)

2800

(316)

80

(303)

3470

(392)

98.5

(373)

3700

(418)

Input Flow US GPM ( L/min ) Output Torque in lbs ( Nm )

Average Output Torque at 3000 psi (207 Bar)

5000

4375

3750

3125

2500

1875

1250

625

0

2 1/2”

2”

1 3/4”

1 1/2”

0 900 1200 1500 1800 2100 2400

Note:


3000psi, except for 2 1/2”

gears (2500 psi).

Speed (RPM)






AND GEAR

TWO PIECE

STYLE


SAE “C” Key (1.25” Keyed) 10800 10800


GF Flow Dividers

Rotary Gear Flow Dividers are an excellent means of splitting a single pump output flow into as many as 6 independent flows. The divided flows can either be equal or unequal in displacement and are pressure independent. They are assembled using the same high quality components across the GPD pump and motor range.

Example

Unlike fixed spool or orifice-type flow dividers, rotary gear flow dividers utilise all of the available input horsepower. Unwanted downstream energy is used internally, rather than being converted into heat.

If you have 2 motors running off a single pump. Motor 1 runs at 1000 psi and the motor 2 runs at 2000 psi. Input flow is 20 gpm.

For a fixed spool flow divider, the calculation would be as follows:

Input HP = (GPM x PSI) / 1714

= (20 x 2000)

1714

= 23.3 Hp

/ 1714 Downstream HP Motor 1 = (10 x 1000) / 1714

= 5.8 Hp

Motor 2 = (10 x 2000) / 1714

= 11.6 Hp

Unused Energy Converted to Heat = 23.3 - (11.6 + 5.8) = 5.9 Hp

For a Rotary Flow Divider Input HP = Total Output HP

There would only be a small loss due to friction between the working parts ( + / - 1-2%). In this example, Motor 1 has a lower downstream pressure than motor 2. The excess energy in the first gear section of the flow divider transfers across the unit via the connecting shaft, helping to drive the second gear section. This lowers the input pressure to drive both sections, therefore no energy is converted into heat.

The following formula can be used to calculate the input pressure:

(This example assumes 1” ( 10 ) gears for both sections)

Input Pressure x Total Gear Width = (Pressure x Gear Width[1]) + (Pressure x Gear Width[2])

PSI x 2 = (2000 x 1) + (1000 x 1)

PSI = 3000 / 2

Input PSI = 1500 psi


GF Flow Dividers

As can be seen, by using a rotary gear flow divider rather than a fixed spool flow divider, the input pressure as well as the heat output of the system can be lowered. This results in two main advantages:

• No wasted horsepower converted into heat

• Extended pump life due to the pump lower working pressures

Pressure Intensification

Pressure relief valves must be used in both the input side and all downstream legs of a rotary flow divider. This protects against unwanted pressure intensification.

However, if pressure intensification is required in a hydraulic circuit, the following example will come into effect.

In the first example the maximum pump pressure is 2000 psi. But Motor 2 may be required to go to 2400 psi, and Motor 1 to still operate at 1000 psi.

The same formula is applied:

Input PSI x Total Gear Width = (P1 x GW1) + (P2 x GW2)

PSI x 2 = (1000 x 1) + (2400 x 1)

PSI = 3400 / 2

Input PSI = 1700 psi

The pump pressure rises to 1700 psi to achieve 2400 psi on Motor 2.


GF 131 / 151 / 176 Flow Dividers

GF131 Series - Size Selection (Note : for pressures above 3000 psi the 230 series is available)

SIZE / SPEED

600 900 1200 1500 1800

½” (05) 2

7

3

11

4

15

5

19

6

22

¾” (07) 3

11

5

19

7

26

8

30

10

39

1” (10) 4

15

6

24

9

34

11

43

14

53

1 ¼” (12) 5

19

8

30

11

43

14

55

18

68

1 ½” (15) 6

22

10

38

14

53

17

66

21

81

1 ¾” (17) 7

26

12

45

16

60

20

77

25

94

2” (20) 8

30

13

50

19

70

23

88

29

110

Note: Output flow in GPM (L/min Bold). Recommend range in red columns.

GFD151 Series - Size Selection (Note : for pressures above 3000 psi the 250 series is available)

SIZE / SPEED

600 900 1200 1500 1800 2100

½” (05) 2

7.5

4.5

17

6

22.5

8

30.5

9.5

36

11

41.5

¾” (07) 3.5

13

6

22.5

9

34

11.5

43.5

14

53

16

60.5

1” (10) 5

19

8.5

32

12

45.5

15

57

18

68

21.5

81.5

1 ¼” (12) 6.5

24.5

10.5

39.5

15

57

19

72

23

87

27

102

1 ½” (15) 8

30.5

13

49

18

68

23

87

27.5

104

32.5

123

1 ¾” (17) 9.5

36

15

57

21

79.5

27

102

32.5

123

38.5

146

2” (20) 11

41.5

17.5

66

24

91

31

117

37.5

142

44

167

2 ¼” (22) 12.5

47.5

20

75.5

27

102

35

132

42

159

49.5

187

2 ½” (25) 14

53

22

83.5

30

114

39

148

47

178

55

208

Note: Output flow in GPM (LPM in Bold). Recommend range in red columns.


GF 131 / 151 / 176 Flow Dividers

GF 176 Series - Size Selection (Note : for pressures above 3000 psi the 265 series is

available – DISPLACEMENTS WILL BE DIFFERENT PLEASE CONSULT SPEC CHART)

SIZE / SPEED

600 900 1200 1500 1800 2100

¾” (07) 3

11

7

26.5

11

41.5

15

57

19

72

22

83.5

1” (10) 6

22.5

11

41.5

17

64.5

22

83.5

27.5

104

33

125

1 ¼” (12) 9

34

15

57

22

83.5

29

110

35.5

134

42

159

1 ½” (15) 11.5

43.5

19

72

27

102

35.5

134

43.5

165

51.5

195

1 ¾” (17) 13.5

51

23

87

32

121

41.5

157

51

193

60

227

2” (20) 16.5

62.5

27

102

37.5

142

48

182

59

223

69.5

263

2 ¼” (22) 18.5

70

30

114

42

159

54.5

206

66

250

78

295

2 ½” (25) 21

79.5

34

129

48

182

61

231

74

280

87

329

2 ¾” (27) 23

87

38

144

52.5

199

67

254

81.5

308

96.5

365

3” (30) 26

98.5

42

159

58

220

74

280

90

341

106

401

Note: Output flow in GPM (LPM in Bold). Recommend range in red columns.

Flow Divider Selection

Example

Input is 30 GPM

Required outputs are 20 GPM and 10 GPM

In the Recommended range of 900 -1200 RPM that would

equate 2” (20) Gears x 1” (10) Gears for a GF131 (Dependent

on downstream maximum pressure requirements)


Dimensions

Flow Dividers / Intensifiers

Dimensions in millimetres

GW = Gear Width in millimetres


A A’ B C D D’ E F G G’ H H’ K

GF

330

- 235

+ GW

57

12.7

+GW

- 63.5 33.5 149.5 90.5 16 - 171.5 89

GF

350

- 257.5

+ GW

57 12.7

+GW

- 86 39.5 152.5 90.5 16 - 181 89

GF

265

- 266.5

+ GW

66.5 12.7

+GW

- 73 39.5 184 107.5 19 - 187.5 101.5

GF

131

190.5

+ GW

- 44.5 19

+GW

44.5 - - 136.5 90.5 16 143 - 63.5

GF

151

200

+ GW

- 44.5 19

+GW

44.5 - - 152.5 90.5 16 143 - 73

GF

176

228.5 + GW

- 51 25.4

+GW

51 - - 200 65 16 197 - 76

Dimensions

GP130 / 131 / 150 / 151 Dimensions

MODEL A E (1) F (2) G H K L M

130/131 1.62 (41.3)

2.95 (74.6)

0.75 (19.1)

1.75 (44.5)

2.50 (63.5)

5.38 (136.5)

5.43 (138.1)

5.88 (149.2)

150/151 2.19 (55.6)

3.38 (85.7)

0.75 (19.1)

1.75 (44.5)

2.88 (73.0)

6.00 (152.4)

5.43 (138.1)

5.88 (149.2)

Dimensions in inches ( millimetres )

(1) - Dimension is for Type 1 shaft end covers. Subtract 1.12” (28.4mm) for 130 Type 2 or 1.00” (25.4mm) for 150 Type

(2) - Add the dimension plus gear width for total of F


Dimensions

GP175 / 176 Dimensions

MODEL A E F (1) G H K L M

175/176 2.19

(55.6)

3.75

(95.3)

1.00

(25.4)

2.00

(50.8)

3.00

(76.2)

7.88

200.0)

7.75

(196.9)

7.94

(201.6)

Dimensions in inches ( millimetres )

(1) - Add the dimension plus gear width for total of F


Dimensions

GP 215 / 230 / 250 / 265 Dimensions

SERIES A B C D E F G H I J K

215 4.27 +

GW

(108.4 +

GW)

4.75

(120.6)

1.62

(41.1)

1.88

(47.75)

0.4 + GW

(10.2 +

GW)

2.00

(50.8)

7.04 +

GW

(178.8 +

GW)

2.62

(66.5)

1.39

(48.0)

4.25

(107.95)

5.00

(127.0)

230 6.19 +

GW

(157.2 +

GW)

5.88

(149.3)

1.62

(41.1)

3.12

(79.2)

0.5 + GW

(12.7 +

GW)

2.56

(65.0)

9.88 +

GW

(250.9

+GW)

3.50

(88.9)

2.29

(58.0)

6.88

(174.7)

6.78

(172.2)

250 7.06 +

GW

(179.3 +

GW)

6.00

(152.4)

2.19

(55.6)

3.50

(88.9)

0.5 + GW

(12.7 +

GW)

3.06

(77.7)

10.25 +

GW

(254.6 +

GW)

3.50

(88.9)

2.29

(58.0)

7.12

(180.0)

7.68

(195.1)

265 7.31 +

GW

(185.7 +

GW)

7.25

(184.1)

2.19

(55.6)

3.75

(95.25)

0.5 + GW

(12.7 +

GW)

3.75

(95.25)

11.38 +

GW

(289.0 +

GW)

4.0

(101.6)

2.64

(67.0)

7.38

(187.4)

8.38

(212.8)

Note: Dimensions in inches ( millimetres ). GW- Gear Width

Add-On ( Through Drive ) dimensions ADD the following : 265 - 4.5” (114mm), 250 - 5.75” (146mm)

Step-Down ( Piggy Back ) dimensions ADD the following : 265 - 4.5” (114mm), 250 and 230 - 3.75” (95mm)


Weights

Approximate Weights - Single Units (Kg)

MODEL 1” 1 1/4” 1 1/2” 1 3/4” 2” 2 1/4” 2 1/2” 2 3/4” 3”

130/131 14.5 14.9 15.4 15.8 16.3 - - - -

150/151 19.5 20.1 20.8 21.5 22.2 23.1 24.2 - -

175/176 32.6 33.5 34.4 35.8 37.1 38.5 39.9 40.5 41.7

MODEL 1” 1 1/4” 1 1/2” 1 3/4” 2” 2 1/4” 2 1/2”

215 8 8.15 9 9.5 10 - -

230 16.4 16.9 17.5 18.1 19.5 22 22.5

250 22 23 35 36 37 39 40

265 25 26.5 27.7 28.8 30.0 31.1 32.2

Note: For multiple sections, add together the single unit sizes (subtract 10% for GP230 units)

For Add On / Through Drive castings add 14Kg for 250 and 265. For Step Down / Piggy

Back castings, add 8Kg for 230 and 250, or 13Kg for 265.


Port Identification / Dimensions

UNF / UNO (OD Tube)

BSPP

NPT


OD / Pitch UNF

Dash Size

Thread OD (mm)

Thread OD (in)

Thread ID (mm)

Thread ID (in)

Pipe Size (in)

7/16” – 20 - 07 11.1 0.44 9.9 0.39 1 / 4”

9/16” - 18 - 09 14.3 0.56 13.0 0.51 3 / 8”

3/4 " - 16 - 12 19.1 0.75 17.5 0.69 1 / 2”

7/8” - 14 - 14 22.2 0.88 20.3 0.80 5 / 8”

1 1/16” - 12 - 17 27.0 1.06 24.9 0.98 3 / 4”

1 3/16” - 12 - 19 30.2 1.19 28.2 1.11 7 / 8”

1 5/16” - 12 - 21 33.3 1.31 31.2 1.23 1”

1 5/8” - 12 - 26 41.3 1.63 39.1 1.54 1 1 / 4”

1 7/8” - 12 - 30 47.6 1.88 45.5 1.79 1 1 / 2”

OD / Pitch BSPP

Dash Size

Thread OD (mm)

Thread OD (in)

Thread ID (mm)

Thread ID (in)

Pipe Size (in)

1/8 ” - 28 - 02 9.6 0.38 8.6 0.34 1/8 ”

1/4 ” - 19 - 04 13.0 0.51 11.9 0.47 1/4 ”

3/8 " - 19 - 06 16.5 0.65 15.2 0.60 3/8 “

1/2 ” - 14 - 08 20.8 0.82 19.1 0.75 1/2 “

3/4 ” - 14 - 12 26.3 1.04 24.6 0.97 3/4 “

1 ” - 11 - 16 33.1 1.30 30.7 1.21 1”

1 1/4” - 11 - 20 41.8 1.64 39.4 1.55 1 1/4 “

1 1/2” - 11 - 24 47.7 1.88 45.5 1.79 1 1/2 “

OD / Pitch NPT

Dash Size

Thread OD (Minor) (mm)

Thread OD (Minor)

(in)

Thread ID (mm)

Thread ID (in)

Pipe Size (in)

1/8 ” - 27 - 02 9.9 0.39 8.4 0.33 1/8 ”

1/4 ” - 18 - 04 13.2 0.52 11.2 0.44 1/4 ”

3/8 " - 18 - 06 16.6 0.65 14.7 0.58 3/8 “

1/2 ” - 14 - 08 20.6 0.81 17.8 0.70 1/2 “

3/4 ” - 14 - 12 26.0 1.02 23.4 0.92 3/4 “

1 ” – 11 1/2 - 16 32.5 1.28 29.5 1.16 1”

1 1/4” – 11 1/2 - 20 41.2 1.62 38.1 1.50 1 1/4 “

1 1/2” – 11 1/2 - 24 47.3 1.86 43.9 1.73 1 1/2 “

Port Identification / Dimensions

Four Bolt SAE Split Flange Dimensions


Nom Size A (mm) A (in) C (mm) C (in) D (mm) D (in) Thread - UNC

Thread - Metric

1/2 12.7 50 38.1 1.5 17.5 0.69 5/16-18 M8 x 1.25

3/4 19.05 0.75 47.6 1.88 22.2 0.88 3/8-16 M10 x 1.5

1 25.4 1.00 52.4 2.06 26.2 1.03 3/8-16 M10 x 1.5

1 1/4 31.75 1.25 58.7 2.31 30.2 1.19 7/16-14 M10 x 1.5

1 1/2 38.1 1.50 69.8 2.75 35.7 1.41 1/2-13 M12 x 1.75

2 50.8 2.00 77.8 3.06 42.9 1.69 1/2-13 M12 x 1.75

2 1/2 63.5 2.50 88.9 3.50 50.8 2.00 1/2-13 M12 x 1.75

3 76.2 3.00 106.4 4.19 61.9 2.44 5/8-11 M16 x 2.00

Flow Rates

Recommended Flow Rate in Pipes

1. Pick the two known values. 2. Lay a straightedge to intersect the two values. 3. Intersection on the third vertical line gives the value of that factor.


Displacement Calculation

To calculate the approximate displacement of an external gear pump or motor in cubic inches per revolution, use the following formula:

Displacement

(in³/rev)

= (Area 1 - Area 2) x

Length

= Area 1 (A) using gear OD Minus ( - ) Area 2 (B) using gear root diameter multiplied ( x ) Gear Length (C)

= (π (0.5 x A)² - π(0.5 x B)²) x C

Note : π = 3.14


Example

A = 2.5” B = 1.75” C = 2”

Area (A) = 3.14 x (0.5 x 2.5)² = 4.89 in²

Area (B) = 3.14 x (0.5 x 1.75)² = 2.35 in²

Total Area = Area (A) - Area (B) = 4.89 - 2.35 = 2.54 in²

Displacement = Total Area x C = 2.54 x 2 =5.08 in³

5.08 in³/rev (83 cc/rev)

To convert in³/rev to cc/rev x 16.39

Conversions / Formulae

Pump Formulae Displacement (cc/rev) = Flow Rate(L/Min) x 1000 (RPM) Input Power Required kW = Flow Rate(L/Min) x Pressure (Bar) 600 Hp = Flow Rate(gpm) x Pressure (psi) 1714

Motor Formulae Displacement (cc/rev) = Input Flow (L/min) x 1000 Required RPM (cc/rev) = Torque (Nm) x 62.83 Pressure (Bar) (L/min) = Speed (RPM) x Displacement (cc/rev) 1000

Motor Speed (RPM) = Input Flow (L/min) x 1000

Displacement (cc/rev)

Shaft Torque (Nm) = Pressure (Bar) x Displacement (cc/rev) 62.83

(Nm) = Flow (L/min) x Pressure (Bar) x 15.91 (RPM) (Nm) = Power (kW) x 9543 (RPM)

Output Power (kW) = Pressure (Bar) x Flow (L/min) 600


TO CONVERT INTO MULTIPLY BY

Bar PSI 14.5

cc Cu. In. 0.06102

Cu. In. cc 16.39

ºC ºF (ºC x 9/5) + 32

Kg lbs. 2.205

KW HP 1.341

Liters Gallons 0.2642

mm inches 0.03937

Nm Lb.-ft. 0.7375

N Lbs. 0.22481

Cu. In. cc 16.39

ºF ºC (ºF-32) / 1.8

Gallons Liters 3.785

HP KW 0.7457

Inches mm 25.4

Lbs. Kg 0.4535

Lb.-ft. Nm 1.356

PSI Bar 0.06896

In. of HG PSI 0.4912

In. of H2O PSI 0.03613

Lbs. Nm 4.4482

Documents

CAST IRON Product Guide · All our components are interchangeable with the most popular ranges of hydraulic cast iron gear pumps, motors and flow dividers. We stock a complete range