2
3555 Kettering Blvd. | Moraine OH | 45439 | www.c2g.com | 800.287.2843 9966_9.12_PDF | © 2012 Lastar Inc. Customer: Sage Technology Solutions Industry: Technology and Communications Location: Mount Joy, PA Challenge/Problem: Connect various A/V devices in front of the classroom to the teachers station in the back of the room Needed to meet plenum rated requirements for use in plenum airspace Wanted to avoid any field terminations if possible Solution: RapidRun Results: Was able to meet all of the A/V and PC signal requirements with three in-wall plenum cables Future-proofed classrooms by including a RapidRun digital runner in the installation which carries HDMI and DVI signals for future A/V and PC hardware Reduced installation time and cost Executive Summary CASE STUDY Sage Technology Solutions provides the total classroom solution utilizing RapidRun ® CHALLENGE An elementary school in central Pennsylvania was being completely renovated and 48 classrooms needed new A/V cabling installed. According to the architect’s spec, HDMI, composite audio/ video, S-Video, USB, Coax, and VGA (HD15) all needed to be installed in order to connect A/V devices in the front of the classroom to the teachers station in the back of the room. In addition, the cables needed to be plenum rated for use in plenum airspace. SOLUTION Sage Technology Solutions was hired to find an A/V solution that met the specifications and then install that solution into 48 classrooms in the elementary school. Having faced similar requirements by other educational institutions in the past, SAGE knew exactly which solution they would use— RapidRun. “We have used RapidRun in other classroom settings,” said Sage Technology Solutions President, Daniel Rohrer. “It is easy to install, and we were really trying to avoid any field terminations. The RapidRun solution tends to be more reliable than pin terminations completed in the field. RapidRun also allows us to save time and money on the installations, and gives us the flexibility to configure our own wall plates without having to order something custom.” SAGE knew that by installing RapidRun, the classroom would easily accommodate the interactive whiteboard, projector, amp, and speakers—as well as additional A/V equipment used in the classroom. By installing all three runner cable options, SAGE was able to send all the necessary analog and digital signals across the classroom. This RapidRun solution meant using fewer cables and avoiding a bunch of bulky, hard-to-manage connectors that needed terminated in the field. RapidRun not only carries multiple signals over a single cable—it also has a small, twist-and-lock connector that passes through ¾” conduit at 90°, and requires no field termination. The total classroom installation included: Sage Technology Solutions | Customer Case Study APPLICATION / CLASSROOM INTEGRATION MARKET / EDUCATION Time is Money When Installing Technology into a Classroom • RapidRun ® • C2G HDMI ® Extender • Polyvision ® Interactive Whiteboards • TeachLogic Classroom Amplification • HP ® Procurve ® Ethernet Switching • Aerohive ® a/b/g/n Managed Wireless Network • VBrick ® Ethernet TV Encoders • Rauland Building Intercom

CASE STUDY Time is Money When InstallingCASE STUDY Sage Technology Solutions provides the total classroom solution utilizing RapidRun ® CHALLENGE An elementary school in central Pennsylvania

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CASE STUDY Time is Money When InstallingCASE STUDY Sage Technology Solutions provides the total classroom solution utilizing RapidRun ® CHALLENGE An elementary school in central Pennsylvania

3555 Kettering Blvd. | Moraine OH | 45439 | www.c2g.com | 800.287.2843

9966_9.12_PDF | © 2012 Lastar Inc.

– Customer: Sage Technology Solutions– Industry: Technology and Communications– Location: Mount Joy, PA

Challenge/Problem:– Connect various A/V devices in front of the

classroom to the teachers station in the back of the room

– Needed to meet plenum rated requirements for use in plenum airspace

– Wanted to avoid any field terminations if possible

Solution:– RapidRun

Results:– Was able to meet all of the A/V and PC

signal requirements with three in-wall plenum cables

– Future-proofed classrooms by including a RapidRun digital runner in the installation which carries HDMI and DVI signals for future A/V and PC hardware

– Reduced installation time and cost

Executive Summary

CASE STUDY

Sage Technology Solutions provides the total classroom solution utilizing RapidRun®

CHALLENGEAn elementary school in central Pennsylvania was being completely renovated and 48 classrooms needed new A/V cabling installed. According to the architect’s spec, HDMI, composite audio/video, S-Video, USB, Coax, and VGA (HD15) all needed to be installed in order to connect A/V devices in the front of the classroom to the teachers station in the back of the room. In addition, the cables needed to be plenum rated for use in plenum airspace.

SOLUTIONSage Technology Solutions was hired to find an A/V solution that met the specifications and then install that solution into 48 classrooms in the elementary school. Having faced similar requirements by other educational institutions in the past, SAGE knew exactly which solution they would use— RapidRun. “We have used RapidRun in other classroom settings,” said Sage Technology Solutions President, Daniel Rohrer. “It is easy to install, and we were really trying to avoid any field terminations. The RapidRun solution tends to be more reliable than pin terminations completed in the field. RapidRun also allows us to save time and money on the installations, and gives us the flexibility to configure our own wall plates without having to order something custom.”

SAGE knew that by installing RapidRun, the classroom would easily accommodate the interactive whiteboard, projector, amp, and speakers—as well as additional A/V equipment used in the classroom. By installing all three runner cable options, SAGE was able to send all the necessary analog and digital signals across the classroom. This RapidRun solution meant using fewer cables and avoiding a bunch of bulky, hard-to-manage connectors that needed terminated in the field. RapidRun not only carries multiple signals over a single cable—it also has a small, twist-and-lock connector that passes through ¾” conduit at 90°, and requires no field termination.The total classroom installation included:

Sage Technology Solutions | Customer Case Study

APPLICATION / CLASSROOM INTEGRATION MARKET / EDUCATION

Time is Money When Installing Technology into a Classroom

• RapidRun® • C2G HDMI® Extender• Polyvision® Interactive Whiteboards• TeachLogic Classroom Amplification

• HP® Procurve® Ethernet Switching• Aerohive® a/b/g/n Managed Wireless Network• VBrick® Ethernet TV Encoders• Rauland Building Intercom

Page 2: CASE STUDY Time is Money When InstallingCASE STUDY Sage Technology Solutions provides the total classroom solution utilizing RapidRun ® CHALLENGE An elementary school in central Pennsylvania

3555 Kettering Blvd. | Moraine OH | 45439 | www.c2g.com | 800.287.2843

9966_9.12_PDF | © 2012 Lastar Inc.

“It is easy to install, and we were really trying to avoid any field terminations. The RapidRun solution tends to be more reliable than pin terminations completed in the field. RapidRun also allows us to save time and money on the installations, and gives us the flexibility to configure our own wall plates without having to order something custom.”

Daniel Rohrer,President Sage Technology Solutions www.sagetechs.com

RESULTSBy installing one of each of RapidRun’s Multimedia, PC, and Digital runner cables, SAGE was able to meet all of the A/V and PC signal requirements with three in-wall plenum cables. Runners were terminated with RapidRun wall plates at the teacher’s station and individual flying leads at the device end. “The flying leads come in different lengths, which is perfect for reaching all of the different devices in the classroom,” Rohrer said. SAGE also made the classroom future-proof by including a RapidRun digital runner in the installation, which carries HDMI and DVI signals for future A/V and PC hardware. Very soon the Analog Sunset will take place, and the VGA connector will go away. When it does, the classroom will still be capable of supporting digital A/V devices without any further need for major renovations.

ABOUT SAGE TECHNOLOGY SOLUTIONSSAGE is a full-service systems integrator and contractor with services that includes systems design and layout, installation, in-service training, and 24-hour emergency repair. SAGE offers complete voice, data, video, and sound communications solutions to meet any requirements. SAGE System Designers are experienced professionals ready to create a custom solution for any need. From the simple to the complex, do what hundreds of others in Central PA have done already—let SAGE design your next system.

ABOUT C2GC2G is a division of Lastar, Inc., a leader in computer, datacom, and audio/video connectivity solutions since 1984. The company delivers connectivity products renowned for superior quality, value, and innovation and are backed by their uncompromising commitment to customer service. For more information regarding C2G, visit: www.c2g.com.