Upload
vedagus1
View
1.265
Download
21
Embed Size (px)
Citation preview
CASEProduct Index
Table of ContentsAliphatic Monomers and Polyisocyanates ........................................................... 1
Aromatic Monomers, Polyisocyanates and Prepolymers ..................................... 5
Textile Curatives, Crosslinking Agents, Catalysts and Solutions .......................... 10
Waterborne Resins for Coatings ........................................................................... 12
Waterborne Resins for Adhesives ........................................................................ 14
Polychloroprene Rubber for Adhesives ................................................................ 15
Hydroxyl-Functional Polyurethanes for Adhesives ............................................... 16
UV Curable Resins ................................................................................................ 17
UV Curable Dispersions ....................................................................................... 19
Unsaturated Polyesters for Conventional Curing ................................................. 20
Saturated Hydroxyl Terminated Polyesters .......................................................... 21
Linear Polycarbonate Polyesters .......................................................................... 22
Hydroxyl Terminated Polyacrylates ...................................................................... 23
Amine Functional and Polyaminoalcohol Coreactants ......................................... 23
Polyether Polyols ................................................................................................. 24
Crosslinkers for Polyurethane Powder Coatings .................................................. 27
Polyesters for Powder Coatings ........................................................................... 27
Trust the Proven Power of Polyurethane Coatings, Adhesives and SealantsBuilt on Bayer Technology
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Aliphatic IsocyanatesMonomeric Aliphatic Diisocyanates
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits Desmodur® H HDI 100 - 49.7 84 3 8.76 Aliphatic oligomers Provides flexibility, and prepolymers for weather stability coatings, adhesives and elastomer applications
Desmodur® I IPDI 100 - 37.5 111 10 8.84 Prepolymers and PU Provides optical clarity, dispersions for coatings, hardness and elastomers, adhesives and weather stability sealant applications
Desmodur® W H12
MDI 100 - 31.8 132 30 8.90 Prepolymers and PU Provides optical clarity, dispersions for coatings, weather stability, superior elastomers, adhesives and mechanical properties and sealant applications resistance to hydrolysis
Desmodur N – HDI Biuret
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® N 100
Desmodur® N 3200
Desmodur® N 75 BA
Desmodur® N 75 BA/X
HDI
HDI
HDI
HDI
100
100
75
75
-
-
BA
BA/ X (1:1)
191
183
255
255
7500
1750
150
150
2K-PUR systems for auto-motive refinish, wood/furniture, industrial, plastics and maintenance coatings
2K-PUR systems for auto-motive refinish, wood/fur-niture, industrial, plastics and maintenance coatings
2K-PUR systems for auto-motive refinish, wood/fur-niture, industrial, plastics and maintenance coatings
2K-PUR systems for auto-motive refinish, wood/fur-niture, industrial, plastics and maintenance coatings
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, goodcompatibility
Lower viscosity than Des-modur® N 100, especially for weather-stable and non-yel-lowing high solids coatings
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility, HAPS free
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility
9.51
9.33
8.85
8.85
22.0
23.0
16.5
16.5
Desmodur N – HDI Trimer
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® N 3300A
Desmodur® N 3390A BA/SN
Desmodur® N 3790 BA
Desmodur® N 3800
HDI
HDI
HDI
HDI
100
90
90
100
-
BA/SN 100(1:1)
BA
-
193
214
236
382
3000
500
1600
6000
2K-PUR systems for automo-tive OEM, automotive refinish, plastics and industrial coatings
2K-PUR systems for automo-tive OEM, automotive refinish, plastics and industrial coatings
2K-PUR systems for automo-tive refinish and industrial coatings
2K-PUR coatings for plastics (soft feel coatings), stone-chip protection systems
Outstanding weather stability and gloss retention, non-yellowing
Outstanding weather stability and gloss retention, non-yellowing
High functionality, fast-drying, weather stable and non-yellowing
Highly flexible, weather stable, increased formulation latitude as blend partner with other hardeners.
9.75
9.41
9.41
9.33
21.8
19.6
17.8
11.0
1
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® N – Low Viscosity HDI Polyisocyanates
Base Solids Solvent NCO Equiv. Visc. Weight per Product Isocyanate % Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® N 3400
Desmodur® N 3600
Desmodur® XP 2410
Desmodur® XP 2580
HDI
HDI
HDI
HDI
100
100
100
100
-
-
-
-
193
183
175
210
140
1100
700
350
Reactive thinner or hardener for high solids and waterborne 2K-PUR coatings
2K-PUR systems for auto-motive OEM, automotive refinish, plastics and industrial coatings
2K-PUR systems for auto-motive refinish, plastics and industrial coatings
2K-PUR light stable elastomers and are high solids systems
Very low viscosity, light-fast, suitable for high gloss systems as well as for matte moisture cure systems
Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems
Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems: good functionality/viscosity balance
Low viscosity, weather stable, retains gloss and color
9.50
9.66
9.58
9.26
21.8
23.0
24.0
20.0
Bayhydur® – Water Dispersible Polyisocyanates
Weight Base Solids NCO Equiv. Visc. perProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Bayhydur® 302
Bayhydur® 303
Bayhydur® 304
Bayhydur® 305
Bayhydur® 401-70
Bayhydur® VP LS 2150 BA
Bayhydur® VP LS 2306
Bayhydur® XP 2487/1
Bayhydur® XP 2547
HDI
HDI
HDI
HDI
IPDI
IPDI
HDI
HDI
HDI
100
100
100
100
70
70
100
100
100
-
-
-
-
PMA/ X (1:1)
BA
-
-
-
243
218
233
259
447
447
525
204
183
2300
2400
4500
6800
600
500
7500
5400
600
Hardener in waterborne 2K-PUR sys-tems for automotive refinish, plastics, industrial coatings and ahesives
Hardener in waterborne 2K-PUR systems for plastics and industrial coatings and adhesives
Hardener in waterborne 2K-PUR sys-tems for automotive refinish, plastics and industrial coatings
Hardener in waterborne 2K-PUR sys-tems for wood/furniture and industrial coatings
Hardener in waterborne 2K-PUR systems for automotive refinish and industrial coatings, crosslinking Dispercoll C
Hardener in waterborne 2K-PUR systems for automotive refinish and industrial coatings
Hardener in waterborne 2K-PUR systems for plastics and industrial coatings (soft feel coatings)
Hardener in waterborne 2K PUR systems for plastics and industrial coatings
Hardener in 2K waterborne PUR systems; flooring and anti-graffiti coating applications
Outstanding weather stability and gloss retention, non-yellowing. FDA compliant for 175.105
Good chemical resistance, weather stable, non-yellowing
High functionality, good chemical resistance, good dispersibility, weather stable, non-yellowing. FDA compliant for 175.105
Good dispersibility, weather stable, non-yellowing, increased flexibility
Weather stable, non-yellowing, improved hardness, better dry-ing properties, Improved heat resistance and long potlife with Dispercoll C
Weather stable, non-yellowing, improved hardness, better drying properties
High flexibility, weather stable, non-yellowing
Outstanding weather stability and gloss retention, non-yellowing
Non-yellowing, water dispersible, low viscosity
9.63
9.60
9.66
9.66
8.91
8.83
9.33
9.68
9.60
17.3
19.3
18.0
16.2
9.4
9.4
8.0
20.6
23.0
2
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® BL 1265 MPA/X
Desmodur® BL 3175A
Desmodur® BL 3272 MPA
Desmodur® BL 3370 MPA
Desmodur® BL 3475 BA/SN
Desmodur® BL 4265 SN
Desmodur® PL 340 BA/SN
Desmodur® PL 350 MPA/SN
Desmodur® VP LS 2078
Desmodur® VP LS 2117
Desmodur® VP LS 2352/1
TDI
HDI
HDI
HDI
HDI/IPDI
IPDI
IPDI
HDI
IPDI
H12
MDI
HDI/IPDI
65
75
72
70
75
65
60
75
60
75
60
PMA/X(1:1)
SN 100
PMA
PMA
BA/ SN 100(1:1)
SN 100
BA/ SN 100 (18:22)
PMA/ SN 100 (11:14)
SN 100:150:200(17.3: 17: 5.7)
SN 100/MPA(1:1)
SN 100/PMA/i-BuOH
(5.8, 13.8, 21.0)
875
378
410
472
510
519
575
400
600
470
583
20000
3000
2400
3500
1000
11000
600
5300
4000
4000
1500
Increases hardness for interior tube/can coatings and stone-chip primer surfacers
Hardener in 1K-PUR baking systems for automotive OEM, can/coil coating and industrial finishes
Hardener in 1K-PUR baking systems for coil coating and industrial finishes
Hardener in 1K-PUR bakingsystems for can/coil coating and industrial finishes
Hardener in 1K-PUR baking systems for industrial finishes, plastics and can/coil coating
Hardener in 1K-PUR baking systems for automotive OEM, can/coil coating and industrial finishes
Hardener in 1K-PUR baking systems for automotive OEM, can/coil coat-ing and industrial finishes
Hardener in 1K-PUR baking systems for automotive OEM, can/coil coat-ing and industrial finishes
Hardener in 1K-PUR baking systems for can/coil coating and industrial finishes
Hardner for lightfast baking PUR systems, formulates high-quality in-dustrial finishes for coil/can coatings
High-grade industrial finishes, especially can/coil coatings; also, used as an additive to improve flex-ibility and adhesion of conventional can/coil coating sytems
Can improve flexibility and resistance to abrasion, impact and chemicals of coatings
High flexibility, good adhesion, weather stable, good chemical resistance
Good stability to thermal yellowing; especially for high build systems
Low baking temperature; high reactivity, weather stable
Low baking temperature; high reactivity, weather stable
Good chemical resistance, high hardness
Low baking temperature, high reactivity, good stability to thermal yel-lowing, high hardness
Low baking temperature, high reactivity, good stability to thermal yel-lowing, high flexilbilty
Good stability to thermalyellowing; good weather stability,
Improves flexibility, tear resistance and adhesionof baking coating systems
Good weather stability and flexibility
9.18
8.80
9.16
9.00
9.16
8.58
8.58
9.16
8.66
8.68
8.25
4.8
11.1
10.2
8.9
8.2
8.1
7.3
10.5
7.0
8.9
7.2
Bayhydur®
– Water Dispersible Polyisocyanates - continued
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Bayhydur XP 7165
Desmodur® DA-L
Desmodur® DN
HDI
HDI
HDI
100
100
100
-
-
-
230
210
193
1000
3400
1250
Hardener in waterborne 2K-PUR systems for automotive refinish, plastics and industrial coatings
Crosslinker for waterborne adhesives systems
Crosslinker for waterborne adhesives systems
Low viscosity, easily dis-persible, weather stable, non-yellowing High functionality produces improved water resistance
Lower viscosity for im-proved dispersibility
9.99
9.68
9.60
18.3
20.0
21.8
Desmodur BL – Blocked Aliphatic Polyisocyanates for 1K Polyurethane Baking Systems
Base Solids Blocked Equiv. Visc. Weight per
Product Isocyanate % Solvent NCO Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
3
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® NZ – HDI/IPDI Polyisocyanates
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® NZ 1 HDI/IPDI
100 - 210 3000 2K-PUR systems for floor coatings, automo-tive refinish and indus-trial finishes
Solvent-free hardener, good weathering, very good gloss retention and mechanical properties
9.6620.0
Blocked Polyisocyanate Dispersions
Base Solids Blocked Equiv. Visc. Weight per Product Isocyanate % Solvent NCO Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits Bayhydur® VP LS 2240 H
12MDI 35 Water/ PMA/X 2.5 1680 20 8.66 Waterborne 2K PUR High flexibility, good adhesion,
(56: 4.5: 4.5) systems for industrial weather stable, good coatings applications, chemical resistance espec. glass coatings especially vs alkali Bayhydur® VP LS 2310 HDI 37 Water/NMP/ 3.7 1135 6500 9.18 Water-thinnable, lightfast, Improves flexibility, impact DMEA 1K-PUR baking coatings strength and adhesion of (54.9: 5: 2.6) aqueous baking systems
Desmodur® Z – IPDI Trimer
Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® Z 4470 BA
Desmodur® Z 4470 MPA/X
Desmodur® Z 4470 SN
Desmodur® Z 4470 SN/BA
IPDI
IPDI
IPDI
IPDI
7 0
7 0
7 0
7 0
BA
PMA/X(1:1)
SN 100
SN 100/BA (2:1)
353
353
353
353
550
1200
1600
1000
2K-PUR systems for auto-motive OEM and refinish; also as additive in alkyd refinish systems
2K-PUR systems for auto-motive OEM and refinish; also as additive in alkyd refinish systems
2K-PUR systems for auto-motive OEM and refinish; also as additive in alkyd refinish systems
2K-PUR systems for auto-motive OEM and refinish; also as additive in alkyd refinish systems
Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents; HAPS free
Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents
Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents
Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents
8.75
8.83
8.75
8.66
11.9
11.9
11.9
11.9
4
Aliphatic Prepolymers
Base Solids NCO Equiv. Visc. Weight perProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits
Desmodur® E-3265 HDI 65 PMA/SN 100 10.4 404 1200 8.70 Moisture curing Good weathering,non-yellowing (6: 29) 1K-PUR systems Desmodur® VP LS 2371 IPDI 100 - 3.7 1100 13000 8.70 Binder for elastic Provides resistance to hydrolysis coatings compounds and surface sealing
Baytec® WP-260 H12
MDI 100 - 26.4 159 280 9.00 Light stable elastomers, Clear, light-stable, room- Polyether prepolymer temperature processable with based on PPG high hardness capabilities, used in coatings and adhesives
Desmodur® XP 2617 HDI 100 - 12.5 328 4250 9.07 Two component Desmodur XP 2617 is a low polyurethane, polyurea, monomer, largely linear and hybrid sealants isocyanate prepolymer
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Aromatic Isocyanates and PrepolymersMonomeric Aromatic Diisocyanates Chemical Commercial NCO Viscosity Equiv. Typical Product Description Form Wt. % mPa•s Wt. Funct. Application Areas Features / Benefits
Mondur® M 4-4’-Diphenylmethane Fused 33.6 Solid 125 2 Elastomers High performance PUR Diisocyanate (MDI) flaked or TPU’s Special storage temp. molten Adhesives required Coatings Fibers
Mondur® ML Mixture of 4,4’- and 2,4’- Light 33.6 10 125 2 Synthetic surfaces Liquid monomeric Diphenylmethane yellow Binders isocyanate Diisocyanate (MDl) liquid Elastomers Low vapor pressure Coatings, Adhesives Good low-temperature Sealants properties Mondur® TDS 2,4-Toluene Clear to 48 3 87.5 2 Elastomers Production of low free TDI Diisocyanate (TDI) light yellow Coatings monomer prepolymers liquid Adhesives Foams
Mondur® TD-65 65/35 mixture of 2,4 Clear to 48 3 87.5 2 Elastomers Unique isomer ratio and 2,6-Toluene light yellow Foams Diisocyanate (TDI) liquid
Mondur® TD-80 80/20 mixture of 2,4- Clear to 48 5 87.5 2 Elastomers Excellent flowability and 2,6-Toluene light yellow Coatings Low temp. stability Diisocyanate (TDI) liquid Adhesives, Sealants Largest commercial Foams TDI version
Special TDI Bayer can also produce blends of its TDI products to offer custom isomer ratios. Contact our Isocyanate Product Management Blends Group for more information at 412-777-2000. Special Blends Bayer can also produce blends of its TDI and MDI isocyanates to meet customer needs. Contact our Isocyanate Product TDI and MDI Management Group for more information at 412-777-2000.
Special MDI Bayer can also produce blends of its MDI products to offer custom products. Contact our Isocyanate Product Management Blends Group for more information at 412-777-2000.
5
Modified MDI Diisocyanates
Chemical Commercial Solids NCO Viscosity Equiv. Typical Product Description Form % Wt. % mPa•s Wt. Funct. Applications Features Mondur® PF Modified MDI Light 100 22.9 650 183 2 High property Liquid 4,4’ -MDI yellow sealants and prepolymer modified MDI liquid coatings Mondur® PC Modified MDI Clear to 100 25.8 145 163 2.1 Elastomers, Low viscosity light yellow High-property High performance liquid sealants and coatings
Mondur® CD Uretonimine Clear to 100 29.5 50 143 2.2 High-performance Low viscosity modified MDI yellow liquid elastomers, High NCO content coatings, sealants, adhesives
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® L
Desmodur® IL
Desmodur® HL
Desmodur® L/IL/HL
Base Solids Solvent NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Wt.% Wt. mPa•s gal., lbs and Description Typical End-Use
Desmodur® L 67 BA
Desmodur® L 67 MPA/X
Desmodur® L 75
Desmodur® IL BA
Desmodur® IL EA
Desmodur® IL 1451
Desmodur® HL BA
TDI
TDI
TDI
TDI
TDI
TDI
HDI / TDI
67
67
75
51
51
51
60
BA
PMA/X
EA
BA
EA
BA
BA
Desmodur® L 67 BA is an aromatic polyi-socyanate based on toluene diisocyanate (TDI)
Desmodur® L 67 MPA /X is an aromatic polyisocyanate based on toluene diisocya-nate (TDI)
Desmodur® L 75 is an aromatic polyiso-cyanate based on toluene diisocyanate (TDI)
Desmodur® IL BA is an aromatic polyisocya-nate based on toluene diisocyanate (TDI)
Desmodur® IL EA is an aromatic polyisocya-nate based on toluene diisocyanate (TDI)
Desmodur® IL 1451 is an aromatic polyi-socyanate based on toluene diisocyanate
Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copoly-mer based on toluene diisocyanate (TDI) and hexamethylene diisocyanate (HDI)
Used to formulate air-drying two-component polyurethane coatings and adhesives
Used to formulate air-drying two-component polyurethane coatings and adhesives
Used to formulate air-drying two-component polyurethane coatings and adhesives
Extremely fast-curing, two-component coatings for wood and metal
Extremely fast-curing, two-component coatings for wood and metal
Hardener component for fast-drying two-component polyurethane coatings, used in industrial wood and furniture finishing
Fast-curing, two-component coatings for furniture and metal; improved light stability over Desmodur® L polyisocyanates
350
350
315
525
525
570
400
600
1600
1600
2000
700
250
2200
9.5
9.6
9.8
9.1
9.3
8.9
9.4
11.9
11.9
13.3
8.0
8.0
7.4
10.5
6
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® R Polyisocyanates
Base Solids Solvent NCO Equiv. Viscosity Weight per Product Type Unique Properties and Product Isocyanate % Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use
Crosslinker for sol-ventborne polyurethane and polychloroprene adhesives
Desmodur® RC is a solution of the polyisocyanurate of toluene diisocyanate (TDI)
Crosslinker for sol-ventborne polyurethane and polychloroprene adhesives
Rapid curing, high heat resistance, bond discoloration occurs
Crosslinker for solventborne polyurethane and polychloro-prene adhesives; light colored product, slower cure than Desmodur RE or RFE
Rapid curing, high heat resistance, minimal discoloration of bond
Desmodur® RE
Desmodur® RC
Desmodur® RFE
Triphenyl methane- 4,4’,4” -triisocyanate
TDI trimer
Tris- (p-isocya-natophenyl) thiophosphate
27
35
27
EA
EA
EA
452
600
583
3
3
3
8.2
n/a
8.3
9.3
7.0
7.2
7
Polymeric MDI
Chemical Commercial Solids NCO Viscosity Equiv. Typical Product Description Form % Wt. % mPa•s Wt. Funct. Applications Features
Mondur® 448 Modified Brown/ 100 27.7 140 152 2.2 Adhesives, Low vapor pressure Polymeric MDI amber liquid coatings, elastomers, Good flowability synthetic surfaces, binders
Mondur® MRS 2,4’-MDI rich Brown/ 100 31.5 200 133 2.6 Coatings, Low vapor pressure Polymeric MDI amber liquid adhesives, sealants
Mondur® MR Polymeric MDI Brown/ 100 31.5 200 133 2.8 Coatings, Multi-purpose Light light amber adhesives, liquid encapsulants
Mondur® 582 2,4’-MDI rich Brown/ 100 32.0 70 131 2.5 Coatings, Low vapor pressure Polymeric MDI amber liquid adhesives, Low viscosity elastomers
Mondur® MRS-5 2,4’-MDI rich Brown/ 100 32.3 55 130 2.4 Coatings, Multi-purpose Polymeric MDI amber liquid elastomers, adhesives, encapsulants, synthetic surfaces
Mondur® MR-5 Polymeric MDI Brown/ 100 32.5 50 129 2.4 Coatings, adhesives Low viscosity amber liquid specialty elastomers High monomer
Mondur® MRS-4 2,4’-MDI rich Brown/ 100 32.5 40 129 2.4 Coatings, Low viscosity Polymeric MDI amber liquid elastomers, adhesives, Good flowability encapsulants, Excellent low-temperature synthetic surfaces stability
Mondur® 1488 2,4’-MDI rich Amber liquid 100 32.9 30 128 2.3 Coatings Low functionality Polymeric MDI adhesives, elastomers, Low vapor pressure encapsulants Good flowability
Mondur® MRS-2 2,4’-MDI rich Amber liquid 100 33.0 25 127 2.2 Coatings, Low functionality Polymeric MDI elastomers, Low vapor pressure encapsulants, Good flowability adhesives
1. Additional Polymeric MDI products are available. Contact our Isocyanate Product Management Group for more information at 412-777-2000.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
TDI Prepolymers
MDI Prepolymers
Prepolymers
Weight per Base Solids NCO Equiv. Viscosity gal., Product Type Unique Properties and Product Isocyanate % Solvent Wt. % Wt. mPa•s lbs and Description Typical End-Use
Desmodur® E-1160 MPA/X is a toluene diisocyanate (TDI) based prepolymer
Desmodur® E-14 is a solvent-free, linear aromatic pre-polymer based on toluene diisocyanate (TDI)
Mondur® 1437 is an MDI- terminated polyether prepolymer
Mondur® MP-095 is an aro-matic isocyanate prepolymer based on MDI
Desmodur® E-23A is a solvent free aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI)
Desmodur® E-28 is a polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI)
Desmodur® E-743 is a polyisocyanate prepolymer based on diphenylmethane 4,4’-diisocyanate (MDI)
Desmodur® E-744 is an aromatic polyisocyanate prepolymer based on diphenylmethane 4,4’-diisocyanate (MDI)
Low monomer contentprepolymer
Solvent free prepolymer
Used for wood coatings, wall and ceiling paneling, boats and furni-ture; clear impregnating systems provide long-term protection against moisture, oil, fuel, chemical and mechanical damage
Used in the formulation of two-component coatings and sealants
Processing ease and low viscosity; used in moisture cured binders
Used as bonding material in foam applications
One-component moisture cure adhesive for bonding wood and other substrates; can also be used as a one-component primer, concrete sealants; two-component thick section coating
Used to formulate zinc-rich primers to give galvanic protection; one-compo-nent moisture cure polymer adhesive for bonding wood and other substrates and sealing porous substrates
Membranes, sealants, flexible adhe-sives and coatings, two-component high-solids systems; adhesive flexibilizer for Desmodur E-28
Produces two-component high-solids adhesives and coatings systems for deck and roof coatings, product finishing, or coatings for solvent sensitive substrates
For use in FDA 175.105 compliant adhesives and coatings
In the formulation of two-component polyurea caulks & sealants with Desmophen® NH 1420 & NH 1520
Desmodur® E-1160 MPA/X
Desmodur® E -14
Mondur® 1437
Mondur® MP- 095
Desmodur® E-23A
Desmodur® E-28
Desmodur® E-743
Desmodur® E-744
Desmodur® VP LS2397
Desmodur® E 210
TDI
TDI
MDI
MDI
MDI
MDI
MDI
MDI
MDI
MDI
60
100
100
100
100
100
100
100
100
100
PMA/X(1:1)
-
-
-
-
-
-
-
-
-
780
1200
420
440
263
255
525
179
750
420
550
6800
2500
4200
1600
6100
2500
600
10000@
50˚C
2500
8.9
8.8
9.1
9.3
9.4
9.5
9.0
10.1
-
9.1
5.4
3.3
10.0
9.6
16.5
16.5
8.0
23.5
5.6
10.0
8
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Prepolymers – continued
Base Solids NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use
Polyether Based Prepolymers
Baytec® MP-030 is a MDI-terminated polyether prepolymer
Baytec® MP-080 is a MDI-terminated polyether prepolymer
Baytec® MP-090 is a MDI-terminated polyether prepolymer
Baytec® MP-210 is a MDI-terminated polyether prepolymer
Baytec® MP-230 is a MDI-terminated polyether prepolymer
Low viscosity and low isocyanate content; used in rubber crumb binders, flex-ible caulks, and sealants
Forms clear moisture-cured films; used in rubber crumb binders, flexible caulks, and sealants
Hydrolysis and bacteria resis-tant; used in pipe lining and conveyor rolls and sealants
Low viscosity; used in adhesives, binders, spray and solid elastomers
Low-temperature stability and inherent flexibility; used in casting systems for cable splicing, and flexible parts
Baytec® MP-030
Baytec® MP-080
Baytec® MP-090
Baytec MP-210
Baytec MP-230
MDI
MDI
MDI
MDI
MDI
100
100
100
100
100
-
-
-
-
-
1105
525
467
194
178
8000
2500
80°C / 225 100°C/ 115
330
550
8.9
9.1
10.0
9.7
10.8
3.8
8.0
9.0
21.6
23.5
High viscosity; used as an epoxy flexibilizer and to formulate liquid, solvent-free polyurethane systems
Epoxy flexibilizer; also used to produce membranes, seal-ants, and casting compounds
Desmocap® 11A is a branched aromatic urethane polymer with ether groups
Desmocap® 12A is a linear aromatic urethane polymer with ether groups
Desmocap® 11A
Desmocap® 12A
TDI
TDI
100
100
-
-
1400
2000
90000
33000
8.7
8.7
3.0
2.1
Desmocap®
Silane – Terminated Prepolymers
Solids Viscosity Weight per Product Type Unique Properties andProduct % Diluent mPa•s gal., lbs and Description Typical End-Use
Desmoseal® XP 2458 is a silane-terminated polyurethane prepolymer
A silane-terminated polyurethane prepolymer
Moisture cures with the absence of bubbles, binder for flexible adhesives, sealants and coatings
For moisture curing coatings,sealants and adhesives
90
100
Mesamoll
-
35,000
40,000
8.5
8.4
Desmoseal® S XP 2458
Desmoseal® S XP 2636
9
Base Solids NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 10
MDI Allophanates
Chemical Solids NCO Viscosity Equiv. Product Description % Wt. % mPa•s Wt. Applications/Features
Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)
Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)
Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI) blended with polymeric diphenylmethane diisocyanate containing 2,4’ - isomer
An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)
Allophanate modified 4,4’- diphenylmethane diisocyanate (MDI)
An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified MDI
An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)
Low freeze point; high solids, solvent-free two-component used in truck bedliners, adhesives, sealants and carpet backing
High monomer content, low freeze point; used in high-performance sealants and coatings
Low NCO content, low freeze point; used in microcellular foams
Low freeze point; used in spray elastomers and adhesives
High solids, solvent-free two-component adhesives and sealants
Low viscosity; used in elastomers, coatings and sealants
Used as a raw material for the preparation of two component urethane coatings, sealants, and adhesives
Mondur® MA-2300
Mondur® MA-2600
Mondur® MA-2601
Mondur® MA-2603
Mondur® MA-2902
Mondur® MA-2903
Mondur® MA-2904
100
100
100
100
100
100
100
180.3
162
145
262
145
221
350
450
100
100
1000
40
400
1400
23.0
26.0
29.1
16.0
29.0
19.0
12.0
1. Additional allophanate products are available. Contact our Isocyanate Product Management Group for more information at 412-777-2000.
Impranil High Solids Polyurethane Prepolymers with Blocked Isocyanate Groups
Solids Viscosity Product Description Solvent % mPa•s Applications/Features Impranil HS-62 Aromatic/Polyether PMA 98 70000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, soft film
Impranil HS-80 Aromatic/Polyether PMA 90 55000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, medium film hardness
Impranil HS-90 Aromatic/Polyether PMA 90 50000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, medium film hardness
Impranil HS-130 Aromatic/Polyether None 100 130000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, hard film
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.11
Imprafix Crosslinking Agents and Catalysts
Solids Viscosity Product Description Solvent % mPa•s Applications/Features
Imprafix TH solution Aromatic Polyisocyanate EA 75 1600 Crosslinker for waterborne products
Imprafix VP LS 2330 Alkyl Amine None 100 <100 Crosslinker for Impranil HS products
Imprafix HS-C Alkyl Amine None 100 <100 Crosslinker for Impranil HS products
Solids Viscosity Product Description Solvent % mPa•s Applications/Features Impranil EWN-13 Aromatic/Polyether DMF/Toluene/MEK 35 22500 Transfer and direct process as topcoat, hydrolysis resistance, flexible with excellent adhesion
Impranil ELH A/1 Aliphatic/ Toluene/IPA/PGME 30 35000 Transfer and direct process as topcoat, Polycarbonate hydrolysis resistance, light stable
Impranil 1K Polyurethane Solutions
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 12
Waterborne ResinsBayhydrol Polyurethane Dispersions for Coatings and Adhesives
Weight Tensile Elong. 100% Solids Cosolvent Viscosity per gal., Strength, at Modulus, TgProduct wt. % % Cosolvent mPa•s pH lbs. psi break,% psi (˚C) Type
Bayhydrol® 110 35 15 NMP 50-300 7.5-9.5 9.20 5900 180 4200 -22 polyester
Bayhydrol® 122 35 15 NMP 50-400 7.0-9.0 9.18 5000 150 4100 -29 polycarbonate
Bayhydrol® 124 35 12 NMP 50-400 7.0-9.0 9.18 5000 275 1300 -32 polycarbonate
Bayhydrol® 140AQ 40 1 Toluene 100-700 6.0-8.0 8.75 5300 450 800 -45 polyester
Bayhydrol® PR 240 40 0 none 10-500 6.0-8.0 9.18 3500 600 350 -47 polyester
Bayhydrol® PR 340/1 40 0 none 10-500 6.0-7.0 9.18 3500 500 350 -47 polycarbonate
Bayhydrol® PR 535 35 5 NMP 10-900 7.0-9.0 8.70 3000 200 2500 -45 polyester-polycarbonate
Bayhydrol® VP LS 2305 40 0 none 11-18 sec (DIN 4) 6.5-8.5 8.34 polyester
Bayhydrol® VP LS 2952/1 40 0 none 10-30 sec (DIN 4) 6.5-7.5 8.30
Bayhydrol® XP 2558 37 0 none < 100 8.0-9.0 8.71 6500 350 polyurethane
Bayhydrol® XP 2637 40 0 none < 1000 7.0 - 9.0 8.40 3500 220 1100 -33 polycarbonate
Bayhydrol Polyurethane Dispersions and Polyacrylics for 2K Applications
Weight % OH Solids Cosolvent Viscosity per gal., Equivalent based on Product wt. % % Cosolvent mPa•s pH lbs Weight solid resin Type
Bayhydrol® A 145 45 8 SN100/EGMBE 400-1500 7.5-8.5 8.83 1145 3.3 OH functional polyacrylic (1:1)
Bayhydrol® PT 241 41 5 NMP 500-1500 7.8-8.8 9.16 1659 2.5 OH functional polyester
Bayhydrol® PT 355 55 2 NMP 250-650 7.0-7.5 8.91 2061 1.5 OH functional polyester- polycarbonate
Bayhydrol® VP LS 2239 35 5 NMP approx. 4000 approx. 8.0 8.66 1056 4.6 OH functional polyester
Bayhydrol® XP 2470 45 8 SN 100/PGNBE approx. 2000 approx. 7.8 8.83 969 3.9 OH functional polyacrylic (1:1)
Bayhydrol® XP 2542 50 1 PGNBE 1000-3500 approx. 7.5 8.83 630 5.4 OH functional polyacrylic
Bayhydrol® XP 2546 41 0 none 35-200 approx. 7.5 8.76 1000 4.15 OH functional polyacrylic
Bayhydrol® XP 2591 35 0 none <1000 6.5-8.5 9.16 1214 4.0 OH functional polyester
Bayhydrol® XP 2601 45 8 SN 100/PGNBE 35-200 approx. 7.8 8.83 969 3.9 OH functional polyacrylic (1:1)
Bayhydrol® XP 2646 50 1 PGNBE 1000-3500 approx. 7.5 8.83 630 5.4 OH functional polyacrylic
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.13
Tensile Elongation 100% Solids, Viscosity Weight per Strength at break, Modulus, TgProduct wt. % Cosolvent DIN mn cup pH gal., lbs psi % psi (˚C) Type
Baybond® PU 330 30 none 30-140 sec 6.5-8.0 8.3 130 700 100 -52 polyester
Baybond® PU 401 40 none 11-18 sec 6.0-8.0 8.34 4500 500 650 -51 polyester
Baybond® PU 403 39 none 11-18 sec 6.0-8.0 8.34 4650 500 550 -47 polyester
Baybond® PU 405 33 none 11-18 sec 6.0-8.0 8.67 900 400 500 n/a polyether
Baybond® PU 406 34.5 none 10-22 sec 5.5-7.5 8.76 1200 275 600 -64 polyether
Baybond® XP 2569 40 none 10-25 sec 7.0-10.0 8.72 900 700 200 -44 polyester
Baybond® Polyurethane Dispersions for Glass Fiber Sizings
Oxidative Cure Dispersions Weight Tensile Elongation 100% Solids Viscosity per Strength, at Modulus, Tg Product wt. % Cosolvent (mPa•s) pH gal., lbs psi break % psi (˚C) Applications
Bayhydrol® B 130 30 none 1600-3000 8.5-9.1 8.34 n/a n/a n/a -89 Primers for metal
Bayhydrol® XP2557* 35 none <100 8.0-9.0 8.54 4350 280 -77 Sealers and coatings for wood. Excellent black heel mark resistance. Parquet sealers and coatings
Bayhydrol® XP 2592 45 none approx. 300 approx. 7.2 8.73 n/a n/a n/a n/a Primers and high gloss coatings for metal with good anti-corrosion properties
Bayhydrol® XP2593/1* 35 none <100 8.0-9.0 8.6 6500 350 2900 n/a Sealers and coatings for wood. Excellent black heel mark resistance
Tensile Elongation 100% Solids, Viscosity Weight per Strength at break, Modulus, TgProduct wt. % Cosolvent (mPa•s) pH gal., lbs psi % psi (˚C) Type
Impranil® DLC-F 40 none < 1000 7.0-9.0 8.76 3000 250 1 000 -33 polycarbonate
Impranil® DLN 40 none 10-500 5.0-8.0 9.18 2900 700 300 -47 polyester
Impranil® DLP 50 none 150-800 6.0-9.0 9.15 500 740 200 -79 polyester
Impranil® DLS 50 none < 70 sec (DIN 4) 6.5-8.5 9.16 3600 600 300 -50 polyester
Impranil® DLU 60 none < 90 sec (DIN 4) 7.0-9.0 8.63 3600 700 360 -65 polycarbonate- polyether
Impranil® DLV/1 40 none 10-40 sec (DIN 4) 5.5-7.5 9.16 2900 500 360 -47 polycarbonate- polyether
Impranil® Polyurethane Dispersions for Textile Coatings and Adhesives
* TSCA approval pending
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 14
Dispercoll® U Polyurethane Dispersions for Adhesives
Tensile Elongation 100% % OH Initial Solids, Viscosity Weight per Strength at break, Modulus, Tg based on Heat PeelProduct Name wt. % Cosolvent mPa•s pH gal., lbs psi % psi (˚C) solid resin Activation Strength
Dispercoll® U 42 ** 50 none 150-800 6.0-9.0 8.91 500 740 200 -79 0 - -
Dispercoll® U 53 ** 40 none 50-600 6.0-9.0 8.91 5600 710 1200 -57 0.14 + ++
Dispercoll® U 54 50 none 40-600 6.0-9.0 8.91 5600 820 1100 -57 0.13 + ++
Dispercoll® U 56 ** 50 none 50-900 6.0-9.0 8.93 4100 860 1100 -60 n/a ++ -
Dispercoll® U KA 8755 ** 45 none < 1000 6.0-9.0 8.91 -62 n/a - +
Dispercoll® U XP 2578 40 none < 1000 6.0-9.0 8.76 5600 710 1200 -57 0.14 + ++
Dispercoll® U XP 2643 ** 40 none < 1000 6.0-9.0 8.91 n/a n/a n/a -48 n/a n/a n/a
Dispercoll U XP 2699 45 none < 1000 6.0-9.0 8.91 1500 800 300 -58 n/a n/a n/a
** Complies with 21 CFR 175.105 (Adhesives) as a component of polyurethane adhesives that comply with 21 CFR 175.105
Latent Reactive Crosslinker for Polyurethane Dispersions for Adhesive Applications
NCO Solids ViscosityProduct Type Content % Content % mPa•s Application
Dispercoll® BL XP 2514N Encapsulated 8 40 ca 5000 Latent reactive crosslinker for polyurethane TDI-dimer suspension dispersions
Form Polymer Viscosity GelProduct Name Supplied Content% pH mPa•s Crystallization Content Applications
Dispercoll® C-74 white 58 12.5 ca 100 medium high Adhesives with long open tack time, liquid relatively high uncrosslinked heat resistance
Dispercoll® C-84 white 55 12.5 ca 100 fast/high medium Rapid development of bond strength liquid
Dispercoll® C VP LS 2372H white 58 12.5 ca 100 slow/low low Adhesives with long open time and adhesion to liquid non-polar substrates
Viscosity Particle Specific Density Product Name Type Concentration% pH mPa•s Size, nm Surface, m sq/g g/cm3 Applications
Dispercoll S 3030 SiO2 30 10 max. 7 9 300 1.21 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength Dispercoll S 4020 SiO2 40 10 max. 7 15 200 1.29 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength
Dispercoll S 4510 SiO2 45 10 max. 15 30 100 1.34 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength
Dispercoll S 5005 SiO2 50 9 max. 30 55 50 1.39 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength
Dispercoll® C Polychloroprene Dispersions for Adhesives
Dispercoll S Additives for Dispercoll C
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.15
Baypren® Polychloroprene Rubber for Adhesives Viscosity Form Specific mPa•s Crystallization Product Name Supplied Gravity 10% in Toluene Rate Applications
Baypren® 213-1 chips 1.23 70-220 medium Contact adhesives with extended open time
Baypren® 213-2 chips 1.23 220-380 medium Contact adhesives with extended open time
Baypren® 223-2 chips 1.23 550-810 medium Contact adhesives with extended open time
Baypren® 233-1 chips 1.23 700-1000 medium Contact adhesives with extended open time
Baypren® 233-2 chips 1.23 1000-1320 medium Contact adhesives with extended open time
Baypren® 243-1 chips 1.23 1130-1800 medium Contact adhesives with extended open time
Baypren® 243-2 chips 1.23 1800-2500 medium Contact adhesives with extended open time
Baypren® 253-2 chips 1.23 2500-5300 medium Contact adhesives with extended open time
Baypren® 310-1 chips 1.23 70-220 high Contact adhesives with rapid strength development Mercaptan modified
Baypren® 320-1 chips 1.23 350-550 high Contact adhesives with rapid strength development Mercaptan modified
Baypren® 320-2 chips 1.23 550-810 high Contact adhesives with rapid strength development Mercaptan modified
Baypren® 321-1 chips 1.23 350-550 high Contact adhesives with rapid strength development Thiuram modified
Baypren® 330-1 chips 1.23 700-1000 high Contact adhesives with rapid strength development Mercaptan modified
Baypren® 331-2 chips 1.23 1000-1320 high Contact adhesives with rapid strength development Thiuram modified
Baypren® 340-1 chips 1.23 1130-1800 high Contact adhesives with rapid strength development Mercaptan modified
Baypren® 340-2 chips 1.23 1800-2500 high Contact adhesives with rapid strength development Mercaptan modified
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 16
Hydroxyl-Functional Polyurethanes for Adhesives
Desmocoll® XP 2597/4 granules 1500-2200 45 ca 30 min. Very good adhesion with a longer tack life than other Desmocoll® 500 grades
Desmocoll® XP 2597/5 granules 2200-3100 45 ca 30 min. Very good adhesion with a longer tack life than other Desmocoll® 500 grades
Desmomelt® Hydroxyl-Functional Polyurethanes for Adhesives
Desmomelt® 530 granules 1000-1400 55* ca 30 min. High crystallization and low thermoplasicity. For the manufacture of adhesive films, webs & fleece for bonding many materials
Desmomelt® 540/1 granules 100-500 60* ca 10 min. Higher initial bond strength and better thermal stability than Desmomelt® 530
Desmomelt® 540/2 granules 500-1000 60* ca 10 min. Higher initial bond strength and better thermal stability than Desmomelt® 530
Desmomelt® 540/3 granules 1500-2200 60* ca 10 min. Higher initial bond strength and better thermal stability than Desmomelt® 530
Desmomelt® VP KA 8702 granules 300+/-200 50* ca 10 min. Very high rate of crystallization and very low thermoplasticity. Allows the economic production of industrial textiles as well as footwear and leather goods.
Viscosity Min. Form mPa•s Activation CrystallizationProduct Name Supplied 15% in MEK Temp. ˚C Time Applications
Desmocoll® 140 granules 60-120 45 ca 48h Low crystallizing, laminating applications, use with crosslinker
Desmocoll® 176 granules 400-800 45 ca 48h Medium crystallizing, general applications, use with crosslinker
Desmocoll® 400/1 granules 400-800 50 ca 30 min. Excellent PVC adhesion, moderate heat resistance, crosslinker recommended
Desmocoll® 400/2 granules 800-1200 50 ca 30 min. Excellent PVC adhesion, moderate heat resistance, crosslinker recommended
Desmocoll® 406 granules 400-800 50 ca 72h Excellent PVC adhesion, low initial strength, longer tack life than Desmocoll® 400
Desmocoll® 500/2 granules 400-800 50 ca 5 min. Excellent adhesion to PVC & rubber, extremely high crystallization rate, for two component adhesives
Desmocoll® 526 granules 400-800 50 ca 48h Excellent PVC adhesion, higher initial strength than Desmocoll® 406
Desmocoll® 530/1 granules 380-1000 55 ca 30 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 530/2 granules 1000-1400 55 ca 30 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 530/3 granules 1400-2500 55 ca 30 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 540/1 granules 100-500 60 ca 10 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 540/4 granules 1500-2100 60 ca 10 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 540/5 granules 2100-3600 60 ca 10 min. Excellent PVC adhesion, high initial bond strength and heat resistance
Desmocoll® 621/1 granules 1500-2100 55 ca 2h Good PVC adhesion, long tack life after thermal activation
Desmocoll® 621/2 granules 2100-3100 55 ca 2h Good PVC adhesion, long tack life after thermal activation
Desmocoll® XP 2597/2 granules 500-1000 45 ca 30 min. Very good adhesion with a longer tack life than other Desmocoll® 500 grades
Desmocoll® XP 2597/3 granules 1000-1500 45 ca 30 min. Very good adhesion with a longer tack life than other Desmocoll® 500 grades
* Softening Point, ˚C
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.17
Supply Viscosity Dual General Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties
Desmolux U 100 Tough but 100 7000 l l l l High abrasion resistance, (previously flexible, aliphatic especially for parquet. VP LS 2258) urethane acrylate Workhorse resin, excellent adhesion to metal Desmolux U 200 Tough but 100 8000 l l Very high abrasion resistance (previously flexible, aliphatic in many test urethane acrylate VP XP 2430) methods, especially for parquet. Workhorse resin Desmolux U 375H* Tough but 75 in HDDA 60000 l l High abrasion resistance, (previously flexible, aliphatic especially for parquet VP LS 2989) urethane acrylate
Desmolux U 400* Hard aliphatic 60 in PTTA 90000 l l Highly resistant films, especially urethane scratch resistance, hard coats hexaacrylate
Desmolux U 500 Tough but 100 6000 l l l l High abrasion and scratch (previously flexible, aromatic resistance, especially for XP 2614) urethane acrylate parquet and cork Desmolux U 680 H Hard, aliphatic 80 in HDDA 29000 l l l Highly resistant films, also for (previously urethane acrylate outdoor applications VP XP 2308)
Desmolux VP LS 2265 Hard, aliphatic 100 800 l l l High hardness and abrasion urethane acrylate resistance, combination product for Desmolux® U100 & U200, high reactivity for low-viscosity coatings
Desmolux XP 2491 Highly flexible, 80 in IBOMA 60000 l Extremely flexible, elongation aliphatic urethane at break >400%, acrylate improves elasticity also in combinations with hard resins
Desmolux XP 2513 Flexible, aliphatic 100 25000 l l l l Highly flexible, improves urethane acrylate elasticity in combination with hard resins. Suitable for flexible applications
Desmolux XP 2587 Hard, aliphatic 100 1500 l l Brilliant coatings with good urethane acrylate, chemical and scratch water emulsifiable resistance
Desmolux XP 2654 Hard, aliphatic 60 in BA 750 l Developed for automotive urethane acrylate clearcoat spot repair
Desmolux XP 2683 Tough but 80 in IBOA 22000 l High abrasion resistance, flexible, aliphatic @ 50˚C excellent adhesion to metal
UV Curable ResinsUrethane Acrylates
* TSCA approval pending
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 18
Supply Viscosity NCO Dual Product Type form % in mPa•s % Flooring Furniture Plastics Graphics Films Cure Properties
Desmolux D 100 Hard, 100 12500 12.5 l l l l For dual-cure technology; (previously aliphatic improves adhesion VP LS 2337) urethane and coin test acrylate
Desmolux VP LS 2396 Flexible, 100 12500 7.5 l l l l l For dual-cure technology; aliphatic improves adhesion, urethane coin test and flexibility acrylate
Desmolux XP 2510 Hard, 90 in BA 15000 6.7 l l l l For dual-cure technology; aliphatic improves adhesion, urethane coin-test, high UV acrylate reactivity
*TSCA approval pending
Epoxy Acrylate
Supply Viscosity Dual General Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties
Desmolux VP LS 2266 Tough but 100 8000 l l l l High reactivity, flexible, excellent adhesion epoxy acrylate to metal hybrid
Polyether Acrylate
Supply Viscosity Dual General
Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties
Desmolux VP LS 2299* Medium-hard, 100 800 l l l Very high reactivity, aminemodified for low viscosity polyether acrylate coatings, excellent adhesion to metal
Polyester in Reactive Thinner
Supply Viscosity Dual General Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties
Desmolux P 175 D Hard, gloss 70 in DPGDA 17000 l l l For clear and (previously polyester pigmented primers VP LS 2110) and topcoats; for UP very high reactivity, good sandability, adhesion and intercoat adhesion, improves scratch resistance of UA topcoats
NCO containing Urethane Acrylates for Dual Cure
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.19
UV Curable Dispersions Viscosity Neutralizing General Product Type Supply form % in DIN 4 mm cup Agent Furniture Plastics Cork Parquet Industrial PVC Properties Bayhydrol UV 2282 PUR-dispersion 39 in water <50 TEA l l l l High chemical resistance, good grain wetting, physical drying. For all round use (multicoat)
Bayhydrol UV 2317 PUR-dispersion 37 in water <80 TEA l l l l High wet film transparency, good grain wetting
Bayhydrol UV VP LS 2280 PUR-dispersion 39 in water <90 TEA l Outstanding physical drying, high chemical resistance. For pigmented laquers
Bayhydrol UV XP 2629* PUR-dispersion 42 in water <50 TEA l Excellent physical drying, very high chemical and stain resistance, for pigmented coatings
PVCflooring
Bayhydrol UV XP 2687 PUR-dispersion 49 in water <50 TEA l l Excellentgrainwetting, goodadhesionoilywoods, nophysicaldrying,for sealerandadhesion primers
Bayhydrol UV XP 2689 PUR-dispersion 42 in water <50 TEA l l Highest crosslink density, low physical drying. Especially for clear coats or single layer metallic coats.
Bayhydrol UV XP 2690* PUR-dispersion 39 in water <80 TEA l l l Weather stable, tough; especially suited for wood exterior applications, very fast water release
*TSCA approval pending
Legend
Abbreviation Explanation Abbreviation Explanation Abbreviation Explanation
TPGDA Tripropylene HDDA Hexanediol TEA Triethylamine glycol diacrylate diacrylate
DPGDA Dipropylene PTTA Pentaerythol IBOMA Isobornyl-methacrylate glycol diacrylate Tetraacrylate
VP LS...XP...UV LS Trial Products • especially suitable suitable
Solvent
Abbreviation Explanation
BA n-butyl acetate
DMF dimethylformamide
EA ethyl acetate
EGMBE ethylene glycol monobutyl ether
i-BuOH isobutyl alcohol
IPA isopropyl alcohol
MEK methyl ethyl ketone
NMP n-methylpyrrolidone
PGME propylene glycol methyl ether
PGNBE propylene glycol n-butyl ether
PMA/MPA PM acetate
SN100 aromatic 100
X xylene
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 20
Unsaturated Polyesters for UV Curing
Wood
Supply form Viscosity Topcoat Topcoat Topcoat Product Type % in mPa•s Putty Sealers matt gloss pigmented Properties
Roskydal 300/1 Tough but 70 in styrene 650 l l Gloss to matt systems: good leveling flexible, gloss and scratch resistance; also for films polyester
Roskydal 502 BA Very hard, 80 in BA 4500 l l lClear and pigmented coatings for gloss polyester application up to max. 100 g/m2 and for pigment pastes; for UP very high UV reactivity after solvent evaporation; virtually non-yellowing; also for films
Roskydal 502 S Very hard, 66 in styrene 525 l Pigmented topcoats for application up to gloss polyester 200 g/m2; good reactivity and resistance to yellowing in the light and dark; also for films
Roskydal E 70 Highly flexible, 65 in styrene 950 l l l lImproves flexibility of styrenic UP requires paraffin systems wax
Unsaturated Polyesters for Conventional Curing
Roskydal 500A Tough but 76 in styrene 1800 l l lHigh brilliance, very low yellowing in flexible gloss the dark, reproducible matt effects; in polyester combination with NC and CAB for thin matt varnishes; excellent leveling and high scratch resistance
Roskydal 502 BA Very hard, 80 in BA 4500 l l lClear and pigmented coatings for gloss polyester application up to max. 100 g/m2 and for pigment pastes; virtually non-yellowing
Roskydal 502 S Very hard, 66 in styrene 525 l Pigmented topcoats for application up to gloss polyester 200 g/m2; good reactivity and resistance to yellowing in the light and dark
Roskydal E 70 Highly flexible, 65 in styrene 950 l l l lImproves flexibility of styrenic UP requires paraffin systems wax
Roskydal 5030 Tough, wax-free 75 in styrene 1525 l l l lWax-free sealers for wood polyester and furniture coatings (clear or pigmented)
Roskydal VP LS 2190 Hard, gloss 100 2,900 l l l lFor clear and pigmented styrene-free UP polyester systems with a solids content of >90%
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.21
Saturated Hydroxyl Terminated PolyestersLinear and Branched Polyesters
Viscosity Approximate Molecular Typical OH # Water,% mPa•s Acid # Products Composition Weight mg KOH/g max. @60˚C mg KOH/g, max.
Desmophen® 1700 Diethylene adipate diol 2550 44 0.1 785@73˚C 1.5
Desmophen® 1800 Branched diethyleneglycol adipate 2800 60 0.1 1250@73˚C 1.2
Desmophen® 2000 Ethylene adipate diol 2000 56 0.1 645@73˚C 1
Desmophen® 2001 KS Ethylene adipate diol 2000 56 0.1 645@73˚C 12001 K(uncatalyzed)
Desmophen® 2502 Butylene adipate diol 2000 56 0.05 685@73˚C o.8
Desmophen® 2505 Butylene adipate diol 4000 28 0.05 3800@73˚C 0.8
Desmophen® F-207-60A Branched diethyleneglycol adipate 60 0.05 1750 0.6
Desmophen® F-2408 Branched diethyleneglycol adipate 48 0.05 1925 0.5
Desmophen® S-101 T-55 Ethylene adipate diol 2000 55 0.05 1175 0.6
Desrnophen® S-102-110 Butylene adipate diol 1000 110 0.05 350 0.6
Desrnophen® S-102-210 Butylene adipate diol 520 210 0.04 400@40˚C 0.5
Desmophen® S-102-160 Butylene adipate diol 750 150 0.05 500 0.5
Desmophen® S-105-110 Hexanediol adipate diol 1000 110 0.05 295 0.6
Desmophen® S-107-55 Neopentylglycol adipate diol 2000 55 0.05 2300 0.6
Desmophen® S-107-110 Neopentylglycol adipate diol 1000 110 0.05 700 0.6
Desmophen® S-1011-55 Diethyleneglycol adipate diol 2000 55 0.05 1075 0.6
Desmophen® S-1011P-110 Diethyleneglycol adipate diol 1000 110 0.05 775@40˚C 0.6
Desmophen® S-1011P-210 Diethyleneglycol adipate diol 520 210 0.05 250@40˚C 0.6
Desmophen® S-1015-35 Hexanediol neopentylglycol adipate diol 3100 35 0.04 4000 0.6
Desmophen® S-1015-55 Hexanediol neopentylglycol adipate diol 2000 55 0.05 1350 0.6
Desmophen® S-1015-120 Hexanediol neopentylglycol adipate diol 900 120 0.05 350 0.6
Desmophen® S-1017-55 Ethylene propyleneglycol adipate diol 2000 55 0.05 1200 0.6
Desmophen® S-1017C-55 Ethylene propyleneglycol adipate diol 2000 55 0.03 1200 0.5
Desmophen® S-1019-35 Hexanediol Adipate/lsophthalate diol 3100 35 0.05 8500 0.6
Desmophen® S-1019-55 Hexanediol adipate/isophthalate diol 2000 55 0.05 2500 1.8
Desmophen® S-1021-70 Butanediol adipate/isophthalate diol 1600 70 0.04 1900 0.6
Desmophen® S-1028-55 Hexanediol phthalate diol 2000 55 0.05 12000 0.6
Desmophen® S-1028-115 Hexanediol phthalate diol 950 115 0.05 2100 0.6
Desmophen® S-1028-210 Hexanediol phthalate diol 510 210 0.05 500 1
Desmophen® S-1035-55 Hexanediol azelate/isophthalate diol 1950 56 0.05 4050 0.7
Desmophen® S-1040P-55 Ethylene butylene adipate diol 2000 55 0.05 1300 0.6
Desmophen® S-1040P-110 Ethylene butylene adipate diol 1000 110 0.05 400 0.6
Desmophen® S-1095-110 Butylene neopentylglycol adipate/ 1000 110 0.05 1500 0.9 isophthalate diol
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 22
Equivalent OH Solids Viscosity Weight/gallon, Weight, avg. Content, Products % Solvent mPa•s lbs. as supplied % Applications
Desmophen® 631A-75 75 PMA 10000-25000 9.2 267 6.4 High solids coatings with similar properties as Desmophen 650A-65
Desmophen® 650A-65 65 PMA/X 10000-20000 9.5 325 5.2 Pigmented coatings with outstanding (6:1) chemical and weather resistance
Desmophen® 651A-65 65 PMA/X 7000-15000 9.2 330 5.2 Pigmented or clear coatings with excellent (6:1) chemical weather resistance and compatibility with other resins
Desmophen® 670A-80 80 BA 2000-31000 9.2 500 3.4 Flexible coatings for metal and plastic, good weather resistance
Desmophen® 680 BA 70 BA 25000-3500 9.0 740 2.3 Higher solids clear and pigmented weatherable coatings
Desmophen® 800 100 - 184000 9.6 200 8.8 Chemical resistant, metal and concrete coatings
Desmophen® 1100 100 - 30500 9.3 262 6.5 Flexible coatings for metal
Desmophen® 1145 100 - 2950-250 1.01 240 0.2 High solids high build coatings for flooring
Desmophen® 1150 100 - 3000-4000 8.3 340 5 High solids high build coatings for flooring Desmophen® 1300 BA 75 BA 800-1200 8.8 567 3 Wood, paper, and metal coatings; fast drying
Desmophen® 1300 X 75 X 3100-3300 8.8 567 3 Wood, paper, and metal coatings, fast drying
Desmophen® 1652A 100 - 9000-13000 9.7 1002 1.7 Flexible coatings for elastomeric roof coatings
Desmophen® F-806P 80 BA/ 2600-4400 10.0 401 4.2 Higher solids, high performance coatings PMA
Desmophen® F-2035 100 - 770-1000 (40˚C) 9.2 216 7.9 Hard abrasion resistant coatings
Desmophen® F-2037-420 100 - 450-520 (40˚C) 10.0 134 12.7 Aliphatic higher solids coatings with good impact and solvent resistance
Desmophen R-12A 100 - 17700 9.4 337 5 Flexible coatings; wood finishes and flooring
Desmophen R221-75 75 PMA 3000-11000 9.2 522 3.3 Weather resistant coatings; excellent grind medium, good flexibility
Polyesters for 2K Systems
Desmophen® C 1100 Aliphatic polycarbonate polyester diol 1000 112 0.05 3200 0.1
Desmophen® C 1200 Aliphatic polycarbonate polyester diol 2000 56 0.05 16500 0.1
Desmophen® C 2100 Aliphatic polycarbonate polyester diol 1000 112 0.05 410 0.1
Desmophen® C 2200 Aliphatic polycarbonate polyester diol 2000 56 0.05 2300@75˚ C 0.2
Linear Polycarbonate Polyesters _
Approximate Molecular Typical OH # Water,% Viscosity Acid # Products Composition Weight mg KOH/g max. mPa•s mg KOH/g, max.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.23
Polyesters for 2K Systems - Continued Equivalent OH Solids Viscosity Weight/gallon, Weight, avg. Content, Products % Solvent mPa•s lbs. as supplied % Applications
Desmophen® A 160 SN
Desmophen® A 365
Desmophen® A 450 BA
Desmophen® A 450 BA/X
Desmophen® A 870 BA
60 SN 100
65 BA/X (3:1)
50 BA
50 BA/X (1:1)
70 BA
2800
3000
4000
4500
3500
8.3
8.6
8.4
8.4
8.6
1063
586
1700
1700
576
1.6
2.9
1
1
2.95
Good water, detergent and chemical resistance
Air dry coatings with excellent light stabilityand weather resistance
Very fast drying furniture finishes
Very fast drying furniture finishes
Automotive refinish and industrial coatings with excellent weather resistance and light stability
Hydroxyl Terminated Polyacrylates
Amine Functional Coreactants
Viscosity Equivalent Typical Products mPa•s Weight, avg. as supplied Amine Value Properties
Desmophen® NH 1220
Desmophen® NH 1420
Desmophen® NH 1520
Desmophen® NH 1521
Desmophen® LS 2965A
Hardener OZ
100 max.
900-2000
800-2000
110-300
100 max.
5000-10000
230
279
290
325
167
244
240-248
199-203
189-193
168-176
335-355
122
Very low viscosity amine functionalcoreactant or reactive diluent of high reactivity
Amine functional coreactant or reactive diluent with longer gel time. For 2K polyurea coatings & sealants
Amine functional coreactant or reactive diluent with longer gel time, less flexible coatings. For 2K polyurea coatings & sealants
Supplied as 90% in n-butyl acetate
Ketimine-functional reactive partner for polyisocyanates
210-240 Latent aliphatic coreactant based on urethane bisoxazolidine
Polyaminoalcohol Coreactant
Viscosity Arnine Equivalent Amine/Hydroxyl Equivalent TypicalProducts mPa•s Weight, avg. as supplied Weight, avg. as supplied Amine Value Properties
Desmophen® VP LS 2089 75 BA 10000 9.3 283 6 Pigmented aliphatic coatings with good chemical resist and weatherability
Desmophen® XP-7116 80 BA 6000 9.6 386 4.4 High solids, high performance coatings for metal and plastic substrates
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 24
Polyether Polyols Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip
Amine-Based Polyols
Multranol® 4050 4 630 356 18000 No
Multranol® 4063 4 460 488 18000 No
Multranol® 8114 4 395 568 8800 No
Multranol® 8120 4 360 623 25000 No
Multranol® 9138 3 700 240 785 No
Multranol® 9144 3 150 1122 250 No
Multranol® 9170 3 350 481 275 No
Multranol® 9181 4 770 291 36000 No
Sucrose-Based Polyols
Multranol® 4030 5.8 380 856 12500 No
Multranol® 4034 5.2 470 624 33000 No
Multranol® 4035 3 380 438 600 No
Multranol® 9171 6.2 340 1020 9000 No
Multranol® 9196 5.5 470 660 28000 No
Specialty Polyols for Coatings, Adhesives, Sealants & Elastomers (CASE)
Arcol® LG-650 3 650 260 820 No
Arcol® LHT-112 3 112 1500 280 No
Arcol® LHT-240 3 238 707 250 No
Arcol® PPG-425 2 263 426 70 No
Arcol® PPG-725 2 147 763 125 No
Arcol® PPG-1000 2 111 1000 164 No
Multranol® 4011 3 550 306 1650 No
Multranol® 4012 3 370 455 650 No
Multranol® 8116 3 120 1400 285 Yes
Multranol® 9133 3 1,050 160 1350 No
Multranol® 9158 3 470 356 470 No
Multranol® 9185 6 100 3366 670 Yes
Multranol® 9198 2 515 218 55 No
Softcel® U-1000 3 168 1000 220 No
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.25
Polyether Polyols – continued
Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip
Low-Monol Polyols
Acclaim® 703 3 238 700 265 No
Acclaim® 2200 2 56 2000 370 No
Acclaim® 2220N 2 50 2250 340 Yes
Acclaim® 3205 2 35 3000 637 No
Acclaim® 3300N 3 57.6 3000 524 No
Acclaim® 4200 2 28 4000 968 No
Acclaim® 4220N 2 28 4000 860 Yes
Acclaim® 6300 3 28 6000 1470 No
Acclaim® 6320N 3 28 6000 1725 Yes
Acclaim® 8200 2 14 8000 3000 No
Flexible Polyols
Arcol® 11-34 3 35 4800 840 Yes
Arcol® E-351 2 40 2800 490 Yes
Arcol® E-644 6 28 12000 1700 Yes
Arcol® F-3022 3 56 3000 480 No
Arcol® F-3222 3 52.6 3200 520 No
Arcol® LG-56 3 57 3000 480 No
Arcol® LHT-42 3 41 4200 700 No
Arcol® PPG-2000 2 56 2000 370 No
Arcol® PPG-3025 2 37 3000 570 No
Arcol® PPG-4000 2 28 4000 980 No
Hyperlite® E-824 3 35.7 4700 830 Yes
Hyperlite® E-863 3.8 31.5 6870 1100 Yes
Multranol® 3900 3 35 4800 840 Yes
Multranol® 3901 3 28 6000 1120 Yes
Multranol® 9111 2 28 4000 820 Yes
Multranol® 9139 3 28 6000 1150 Yes
Multranol® 9190 2 28 4000 830 Yes
Multranol® 9199 3 37 4525 1100 Yes
Softcel® VE-1000 2.5 94 1500 375 Yes
Ultracel® 3000 4.0 30 7500 1700 Yes
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 26
Polyether Polyols – continued
Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip
Polymer Polyols
Arcol® 24-32 2 32 NA 1220 Yes
Arcol® 31-28 3 28 NA 3000 Yes
Arcol® 34-28 3 27 NA 2240 Yes
Arcol® 34-35 3 47 NA 1260 No
Arcol® E-900 3 25.4 NA 2600 Yes
Arcol® HS-100 3 28.2 NA 3600 No
Hyperlite® E-851 3.8 18.5 NA 6000 Yes
Hyperlite® E-852 3 20.2 NA 5200 Yes
Hyperlite® E-889 3 20.2 NA 5000 Yes
Multranol® 8151 3 28 NA 3600 Yes
Polyols for Encapsulation Systems
Baytec® ENC-30P 3 550 306 1650 No
Baytec® ENC-55P 3 370 45 650 No
Baytec® ENC-140P 3 222 NA 1350 No
Baytec® ENC-340P 3 56 3000 500 No
Baytec® ENC-390P 2 35 4800 840 Yes
Contact Bayer for more detailed information about Actaclear carrier fluids.
27
Rucote® Polyesters for Smooth, Weatherable Polyurethane Powder Coatings
OH Viscosity Rucote® Resin Type Number Poise@200°C ~ Tg (°C) Bake Cycle Features
Rucote® 102 Polyurethane 40 40 57 10’ @ 200°C / 392°F Smooth and excellent gloss, 20’ @ 185°C / 365°F excellent mechanics
Rucote® 106 Polyurethane 42 42 66 10’ @ 200°C / 392°F Good flow and gloss, higher 20’ @ 185°C / 365°F Tg than Rucote 102
Rucote® 107 Polyurethane 47 40 65 10’ @ 200°C / 392°F Excellent gloss and mechanics, 20’ @ 185°C / 365°F high Tg
Rucote® 118 Polyurethane 42 72 68 10’ @ 200°C / 392°F Highest Tg for storage stability, 20’ @ 185°C / 365°F utility in low gloss and wrinkle systems
Rucote® 121 Polyurethane 40 40 58 15’ @ 200°C / 392°F Flexible resin (0 T-bend), great 20’ @ 185°C / 365°F corrosion resistance, utility in low gloss systems
Rucote® Polyesters for Smooth, Chemical Resistant and Matte Finishes
Rucote® 104 Polyurethane 112 40 57 15’ @ 200°C / 392°F Detergent resistance with high 20’ @ 185°C / 365°F gloss and excellent elasticity
Rucote® 117 Polyurethane 110 40 60 20’ @ 200°C / 392°F Anti - graffiti coatings, high chemical resistance, tough with good gloss
Rucote® 109 Polyurethane 265 25 55 15’ @ 210°C / 392°F Used in combination with Rucote 123 or Rucote 118 for one-shot low gloss systems
Rucote® 123 Polyurethane 23 75 64 15’ @ 210°C / 392°F Used in combination with Rucote 109 for one-shot low gloss systems
Rucote® Polyesters for Super Weatherable Polyurethane Powder Coating
Rucote® XP 1003 Polyurethane 55 25 >57 15’ @ 210°C / 392°F Isophthalic acid based for superior outdoor durability
Rucote® XP 1004 Polyurethane 77 30 >57 15’ @ 210°C / 392°F Isophthalic acid based for superior outdoor durability and chemical resistance
Crelan® Crosslinkers for Polyurethane Powder Coatings
Minimum Baking Crelan® Crosslinker Basis NCO % ~Functionality ~ Tg (°C) Temperature @ 15’ Features
Crelan® NI-2 ε caprolactam 14.0 2.2 60.0 180°C / 356°F High gloss in thin film builds blocked IPDI
Crelan® VP LS 2256 ε caprolactam 14.6 2.5 50.0 170°C / 338°F High chemical resistance, blocked IPDI excellent overbake stability
Crelan® NW-5 ε caprolactam 12.5 2.3 55 170°C / 338°F Higher reactivity & elasticity blocked H12MDI
Crelan® EF 403 IPDI Uretdione 13.5 1.9 52 180°C / 356°F No blocking agent, excellent flowout & pigment wetting
Crelan® XP 2459 IPDI Uretdione 18.8 2 60 180°C / 356°F Higher reactivity, chemical resistance, & better mechanics
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
28
Rucote® Polyesters for 50:50 Hybrid Powder Coatings
OH Viscosity Rucote® Resin Type Acid # Poise@200°C ~ Tg (°C) Bake Cycle Features
551 Epoxy Hybrid 85 25 62 15’ @ 180°C / 356°F Superior flow and leveling
5006 Epoxy Hybrid 85 25 67 10’ @ 185°C / 365°F Excellent flow and leveling
XP 5006-S Epoxy Hybrid 85 25 67 10’ @ 185°C / 365°F Low reactivity resin
Rucote® Polyesters for 60:40 Hybrid Powder Coatings
560 Epoxy Hybrid 55 30 60 15’ @ 200°C / 392°F Excellent flow and chemical resistance
XP 561 Epoxy Hybrid 55 30 60 -- Low reactivity resin, FDA compliant for CFR 175.300
5000 Epoxy Hybrid 55 30 58 10’ @ 200°C / 392°F Superior gloss and DOI
Rucote® Polyesters for 70:30 Hybrid Powder Coatings 570 Epoxy Hybrid 37 50 62.0 15’ @ 200°C / 392°F Cost effective, good flow
Rucote® Polyesters Resins for Standard Outdoor Durability 900900 93:7 TGIC 37 50 70 15’ @ 200°C / 392°F Good flow and mechanics 95:5 HAA
9006 93:7 TGIC 36 34 68 15’ @ 204°C / 400°F Excellent flow and overbake stability
910 93:7 TGIC 35 40 64 10’ @ 200°C / 392°F Excellent flow and 0 T-bend
921 93:7 TGIC 38 18 60 15’ @ 150°C / 302°F High reactivity for low 95:5 HAA temperaturecure
9008 90:10 TGIC 50 25 69.0 15’ @ 190°C / 379°F Enhanced chemical resistance 93:7 HAA
Rucote® Polyesters Resins for Highest Outdoor Durability 945 93:7 TGIC 35 35 60.0 15’ @ 170°C / 338°F Isophthalic acid based, high reactivity
9010 93:7 TGIC 32 42 66.0 15’ @ 190°C / 379°F Isophthalic acid based, high gloss 95:5 HAA
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Bayer MaterialScience LLC100 Bayer RoadPittsburgh, PA 15205-9741Contact Number: 412-777-3983
www.bayermaterialscienceNAFTA.com
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to deter-mine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent.
© Bayer MaterialScience LLC 20621 1/09